Do we need configure support for mktime()?
---- old/io.c
-+++ new/io.c
-@@ -57,6 +57,7 @@ extern int remove_sent_files;
+To use this patch, run these commands for a successful build:
+
+ patch -p1 <patches/time-limit.diff
+ ./configure (optional if already run)
+ make
+
+based-on: 7c8f180900432e646c0a4bd02e2c4033068dbb7c
+diff --git a/io.c b/io.c
+--- a/io.c
++++ b/io.c
+@@ -58,6 +58,7 @@ extern int remove_source_files;
extern int preserve_hard_links;
- extern char *filesfrom_host;
+ extern BOOL extra_flist_sending_enabled;
extern struct stats stats;
+extern time_t stop_at_utime;
- extern struct file_list *the_file_list;
+ extern struct file_list *cur_flist;
+ #ifdef ICONV_OPTION
+ extern int filesfrom_convert;
+@@ -168,11 +169,19 @@ static void check_timeout(BOOL allow_keepalive)
+ * generator might be blocked trying to send checksums, it needs to
+ * know that the receiver is active). Thus, as long as one or the
+ * other is successfully doing work, the generator will not timeout. */
+- if (!io_timeout)
++ if (!io_timeout && !stop_at_utime)
+ return;
- const char phase_unknown[] = "unknown";
-@@ -168,16 +169,24 @@ static void check_timeout(void)
- {
- time_t t;
+ t = time(NULL);
-+ if ((!io_timeout || ignore_timeout) && !stop_at_utime)
-+ return;
-+
-+ t = time(NULL);
-+
+ if (stop_at_utime && t >= stop_at_utime) {
+ rprintf(FERROR, "run-time limit exceeded\n");
+ exit_cleanup(RERR_TIMEOUT);
+ }
+
- if (!io_timeout || ignore_timeout)
- return;
-
- if (!last_io_in) {
-- last_io_in = time(NULL);
-+ last_io_in = t;
- return;
- }
-
-- t = time(NULL);
--
- if (t - last_io_in >= io_timeout) {
- if (!am_server && !am_daemon) {
- rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
---- old/options.c
-+++ new/options.c
-@@ -116,6 +116,7 @@ int checksum_seed = 0;
- int inplace = 0;
- int delay_updates = 0;
- long block_size = 0; /* "long" because popt can't set an int32. */
++ if (!io_timeout)
++ return;
++
+ if (allow_keepalive) {
+ /* This may put data into iobuf.msg w/o flushing. */
+ maybe_send_keepalive(t, 0);
+diff --git a/options.c b/options.c
+--- a/options.c
++++ b/options.c
+@@ -113,6 +113,7 @@ size_t bwlimit_writemax = 0;
+ int ignore_existing = 0;
+ int ignore_non_existing = 0;
+ int need_messages_from_generator = 0;
+time_t stop_at_utime = 0;
-
-
- /** Network address family. **/
-@@ -365,6 +366,8 @@ void usage(enum logcode F)
- rprintf(F," --password-file=FILE read password from FILE\n");
+ int max_delete = INT_MIN;
+ OFF_T max_size = 0;
+ OFF_T min_size = 0;
+@@ -789,6 +790,8 @@ void usage(enum logcode F)
+ rprintf(F," --password-file=FILE read daemon-access password from FILE\n");
rprintf(F," --list-only list the files instead of copying them\n");
- rprintf(F," --bwlimit=KBPS limit I/O bandwidth; KBytes per second\n");
+ rprintf(F," --bwlimit=RATE limit socket I/O bandwidth\n");
+ rprintf(F," --stop-at=y-m-dTh:m Stop rsync at year-month-dayThour:minute\n");
+ rprintf(F," --time-limit=MINS Stop rsync after MINS minutes have elapsed\n");
rprintf(F," --write-batch=FILE write a batched update to FILE\n");
rprintf(F," --only-write-batch=FILE like --write-batch but w/o updating destination\n");
rprintf(F," --read-batch=FILE read a batched update from FILE\n");
-@@ -385,7 +388,7 @@ enum {OPT_VERSION = 1000, OPT_DAEMON, OP
- OPT_FILTER, OPT_COMPARE_DEST, OPT_COPY_DEST, OPT_LINK_DEST, OPT_HELP,
- OPT_INCLUDE, OPT_INCLUDE_FROM, OPT_MODIFY_WINDOW, OPT_MIN_SIZE, OPT_CHMOD,
+@@ -813,6 +816,7 @@ enum {OPT_VERSION = 1000, OPT_DAEMON, OPT_SENDER, OPT_EXCLUDE, OPT_EXCLUDE_FROM,
OPT_READ_BATCH, OPT_WRITE_BATCH, OPT_ONLY_WRITE_BATCH, OPT_MAX_SIZE,
-- OPT_NO_D,
-+ OPT_NO_D, OPT_STOP_AT, OPT_TIME_LIMIT,
+ OPT_NO_D, OPT_APPEND, OPT_NO_ICONV, OPT_INFO, OPT_DEBUG,
+ OPT_USERMAP, OPT_GROUPMAP, OPT_CHOWN, OPT_BWLIMIT,
++ OPT_STOP_AT, OPT_TIME_LIMIT,
OPT_SERVER, OPT_REFUSED_BASE = 9000};
static struct poptOption long_options[] = {
-@@ -494,6 +497,8 @@ static struct poptOption long_options[]
- {"log-format", 0, POPT_ARG_STRING, &log_format, 0, 0, 0 },
- {"itemize-changes", 'i', POPT_ARG_NONE, 0, 'i', 0, 0 },
- {"bwlimit", 0, POPT_ARG_INT, &bwlimit, 0, 0, 0 },
+@@ -1006,6 +1010,8 @@ static struct poptOption long_options[] = {
+ {"no-timeout", 0, POPT_ARG_VAL, &io_timeout, 0, 0, 0 },
+ {"contimeout", 0, POPT_ARG_INT, &connect_timeout, 0, 0, 0 },
+ {"no-contimeout", 0, POPT_ARG_VAL, &connect_timeout, 0, 0, 0 },
+ {"stop-at", 0, POPT_ARG_STRING, 0, OPT_STOP_AT, 0, 0 },
+ {"time-limit", 0, POPT_ARG_STRING, 0, OPT_TIME_LIMIT, 0, 0 },
- {"backup", 'b', POPT_ARG_NONE, &make_backups, 0, 0, 0 },
- {"backup-dir", 0, POPT_ARG_STRING, &backup_dir, 0, 0, 0 },
- {"suffix", 0, POPT_ARG_STRING, &backup_suffix, 0, 0, 0 },
-@@ -1060,6 +1065,36 @@ int parse_arguments(int *argc, const cha
- usage(FINFO);
- exit_cleanup(0);
+ {"rsh", 'e', POPT_ARG_STRING, &shell_cmd, 0, 0, 0 },
+ {"rsync-path", 0, POPT_ARG_STRING, &rsync_path, 0, 0, 0 },
+ {"temp-dir", 'T', POPT_ARG_STRING, &tmpdir, 0, 0, 0 },
+@@ -1781,6 +1787,36 @@ int parse_arguments(int *argc_p, const char ***argv_p)
+ return 0;
+ #endif
+ case OPT_STOP_AT:
+ arg = poptGetOptArg(pc);
default:
/* A large opt value means that set_refuse_options()
* turned this option off. */
-@@ -1610,6 +1645,15 @@ void server_options(char **args,int *arg
+@@ -2507,6 +2543,15 @@ void server_options(char **args, int *argc_p)
args[ac++] = arg;
}
if (backup_dir) {
args[ac++] = "--backup-dir";
args[ac++] = backup_dir;
---- old/rsync.yo
-+++ new/rsync.yo
-@@ -388,6 +388,8 @@ to the detailed description below for a
- --password-file=FILE read password from FILE
+diff --git a/rsync.yo b/rsync.yo
+--- a/rsync.yo
++++ b/rsync.yo
+@@ -447,6 +447,8 @@ to the detailed description below for a complete description. verb(
+ --password-file=FILE read daemon-access password from FILE
--list-only list the files instead of copying them
- --bwlimit=KBPS limit I/O bandwidth; KBytes per second
+ --bwlimit=RATE limit socket I/O bandwidth
+ --stop-at=y-m-dTh:m Stop rsync at year-month-dayThour:minute
+ --time-limit=MINS Stop rsync after MINS minutes have elapsed
--write-batch=FILE write a batched update to FILE
--only-write-batch=FILE like --write-batch but w/o updating dest
--read-batch=FILE read a batched update from FILE
-@@ -1584,6 +1586,19 @@ transfer was too fast, it will wait befo
- result is an average transfer rate equaling the specified limit. A value
- of zero specifies no limit.
+@@ -2448,6 +2450,19 @@ files can show up as being rapidly sent when the data is quickly buffered,
+ while other can show up as very slow when the flushing of the output buffer
+ occurs. This may be fixed in a future version.
+dit(bf(--stop-at=y-m-dTh:m)) This option allows you to specify at what
+time to stop rsync, in year-month-dayThour:minute numeric format (e.g.
dit(bf(--write-batch=FILE)) Record a file that can later be applied to
another identical destination with bf(--read-batch). See the "BATCH MODE"
section for details, and also the bf(--only-write-batch) option.
---- old/util.c
-+++ new/util.c
-@@ -125,6 +125,133 @@ void overflow_exit(char *str)
+diff --git a/util.c b/util.c
+--- a/util.c
++++ b/util.c
+@@ -125,6 +125,133 @@ NORETURN void overflow_exit(const char *str)
exit_cleanup(RERR_MALLOC);
}
+ } else
+ in_date = 1;
+ for ( ; ; cp++) {
-+ if (!isdigit(*cp))
++ if (!isDigit(cp))
+ return -1;
+
+ n = 0;
+ do {
+ n = n * 10 + *cp++ - '0';
-+ } while (isdigit(*cp));
++ } while (isDigit(cp));
+
+ if (*cp == ':')
+ in_date = 0;
+ return val;
+}
+
- int set_modtime(char *fname, time_t modtime, mode_t mode)
- {
- #if !defined HAVE_LUTIMES || !defined HAVE_UTIMES
+ /* This returns 0 for success, 1 for a symlink if symlink time-setting
+ * is not possible, or -1 for any other error. */
+ int set_modtime(const char *fname, time_t modtime, uint32 mod_nsec, mode_t mode)
git.samba.org / rsync-patches.git / blobdiff