selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216
 217         rpc_server:epmapper = external
 218         rpc_server:spoolss = external
 219         rpc_server:lsarpc = external
 220         rpc_server:samr = external
 221         rpc_server:netlogon = external
 222         rpc_server:register_embedded_np = yes
 223         rpc_server:FssagentRpc = external
 224
 225         rpc_daemon:epmd = fork
 226         rpc_daemon:spoolssd = fork
 227         rpc_daemon:lsasd = fork
 228         rpc_daemon:fssd = fork
 229         fss: sequence timeout = 1
 230 ";
 231
 232         my $vars = $self->provision($path,
 233                                     "LOCALNT4DC2",
 234                                     "localntdc2pass",
 235                                     $nt4_dc_options);
 236
 237         $vars or return undef;
 238
 239         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 240                return undef;
 241         }
 242
 243         $vars->{DC_SERVER} = $vars->{SERVER};
 244         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 245         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 246         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 247         $vars->{DC_USERNAME} = $vars->{USERNAME};
 248         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 249
 250         $self->{vars}->{nt4_dc} = $vars;
 251
 252         return $vars;
 253 }
 254
 255 sub setup_nt4_dc_schannel($$)
 256 {
 257         my ($self, $path) = @_;
 258
 259         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 260
 261         my $pdc_options = "
 262         domain master = yes
 263         domain logons = yes
 264         lanman auth = yes
 265
 266         rpc_server:epmapper = external
 267         rpc_server:spoolss = external
 268         rpc_server:lsarpc = external
 269         rpc_server:samr = external
 270         rpc_server:netlogon = external
 271         rpc_server:register_embedded_np = yes
 272
 273         rpc_daemon:epmd = fork
 274         rpc_daemon:spoolssd = fork
 275         rpc_daemon:lsasd = fork
 276
 277         server schannel = yes
 278 ";
 279
 280         my $vars = $self->provision($path,
 281                                     "LOCALNT4DC9",
 282                                     "localntdc9pass",
 283                                     $pdc_options);
 284
 285         $vars or return undef;
 286
 287         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 288                return undef;
 289         }
 290
 291         $vars->{DC_SERVER} = $vars->{SERVER};
 292         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 293         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 294         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 295         $vars->{DC_USERNAME} = $vars->{USERNAME};
 296         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 297
 298         $self->{vars}->{nt4_dc_schannel} = $vars;
 299
 300         return $vars;
 301 }
 302
 303 sub setup_nt4_member($$$)
 304 {
 305         my ($self, $prefix, $nt4_dc_vars) = @_;
 306         my $count = 0;
 307         my $rc;
 308
 309         print "PROVISIONING MEMBER...";
 310
 311         my $member_options = "
 312         security = domain
 313         server signing = on
 314         dbwrap_tdb_mutexes:* = yes
 315 ";
 316         my $ret = $self->provision($prefix,
 317                                    "LOCALNT4MEMBER3",
 318                                    "localnt4member3pass",
 319                                    $member_options);
 320
 321         $ret or return undef;
 322
 323         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 324         do {
 325                 print "Waiting for the LOGON SERVER registration ...\n";
 326                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 327                 if ($rc != 0) {
 328                         sleep(1);
 329                 }
 330                 $count++;
 331         } while ($rc != 0 && $count < 10);
 332         if ($count == 10) {
 333                 print "NMBD not reachable after 10 retries\n";
 334                 teardown_env($self, $ret);
 335                 return 0;
 336         }
 337
 338         my $net = Samba::bindir_path($self, "net");
 339         my $cmd = "";
 340         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 341         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 342         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 343
 344         if (system($cmd) != 0) {
 345             warn("Join failed\n$cmd");
 346             return undef;
 347         }
 348
 349         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 350                return undef;
 351         }
 352
 353         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 354         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 355         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 356         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 357         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 358         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 359
 360         return $ret;
 361 }
 362
 363 sub setup_admember($$$$)
 364 {
 365         my ($self, $prefix, $dcvars) = @_;
 366
 367         # If we didn't build with ADS, pretend this env was never available
 368         if (not $self->have_ads()) {
 369                 return "UNKNOWN";
 370         }
 371
 372         print "PROVISIONING S3 AD MEMBER...";
 373
 374         my $member_options = "
 375         security = ads
 376         server signing = on
 377         workgroup = $dcvars->{DOMAIN}
 378         realm = $dcvars->{REALM}
 379 ";
 380
 381         my $ret = $self->provision($prefix,
 382                                    "LOCALADMEMBER",
 383                                    "loCalMemberPass",
 384                                    $member_options,
 385                                    $dcvars->{SERVER_IP},
 386                                    $dcvars->{SERVER_IPV6});
 387
 388         $ret or return undef;
 389
 390         close(USERMAP);
 391         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 392         $ret->{REALM} = $dcvars->{REALM};
 393
 394         my $ctx;
 395         my $prefix_abs = abs_path($prefix);
 396         $ctx = {};
 397         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 398         $ctx->{domain} = $dcvars->{DOMAIN};
 399         $ctx->{realm} = $dcvars->{REALM};
 400         $ctx->{dnsname} = lc($dcvars->{REALM});
 401         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 402         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 403         Samba::mk_krb5_conf($ctx, "");
 404
 405         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 406
 407         my $net = Samba::bindir_path($self, "net");
 408         my $cmd = "";
 409         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 410         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 411                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 412         } else {
 413                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 414         }
 415         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 416         $cmd .= "$net join $ret->{CONFIGURATION}";
 417         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 418
 419         if (system($cmd) != 0) {
 420             warn("Join failed\n$cmd");
 421             return undef;
 422         }
 423
 424         # We need world access to this share, as otherwise the domain
 425         # administrator from the AD domain provided by Samba4 can't
 426         # access the share for tests.
 427         chmod 0777, "$prefix/share";
 428
 429         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 430                 return undef;
 431         }
 432
 433         $ret->{DC_SERVER} = $dcvars->{SERVER};
 434         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 435         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 436         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 437         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 438         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 439
 440         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 441         $ret->{target} = $self;
 442
 443         return $ret;
 444 }
 445
 446 sub setup_admember_rfc2307($$$$)
 447 {
 448         my ($self, $prefix, $dcvars) = @_;
 449
 450         # If we didn't build with ADS, pretend this env was never available
 451         if (not $self->have_ads()) {
 452                 return "UNKNOWN";
 453         }
 454
 455         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 456
 457         my $member_options = "
 458         security = ads
 459         server signing = on
 460         workgroup = $dcvars->{DOMAIN}
 461         realm = $dcvars->{REALM}
 462         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 463         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 464         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 465         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 466         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 467 ";
 468
 469         my $ret = $self->provision($prefix,
 470                                    "RFC2307MEMBER",
 471                                    "loCalMemberPass",
 472                                    $member_options,
 473                                    $dcvars->{SERVER_IP},
 474                                    $dcvars->{SERVER_IPV6});
 475
 476         $ret or return undef;
 477
 478         close(USERMAP);
 479         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 480         $ret->{REALM} = $dcvars->{REALM};
 481
 482         my $ctx;
 483         my $prefix_abs = abs_path($prefix);
 484         $ctx = {};
 485         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 486         $ctx->{domain} = $dcvars->{DOMAIN};
 487         $ctx->{realm} = $dcvars->{REALM};
 488         $ctx->{dnsname} = lc($dcvars->{REALM});
 489         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 490         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 491         Samba::mk_krb5_conf($ctx, "");
 492
 493         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 494
 495         my $net = Samba::bindir_path($self, "net");
 496         my $cmd = "";
 497         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 498         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 499                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 500         } else {
 501                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 502         }
 503         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 504         $cmd .= "$net join $ret->{CONFIGURATION}";
 505         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 506
 507         if (system($cmd) != 0) {
 508             warn("Join failed\n$cmd");
 509             return undef;
 510         }
 511
 512         # We need world access to this share, as otherwise the domain
 513         # administrator from the AD domain provided by Samba4 can't
 514         # access the share for tests.
 515         chmod 0777, "$prefix/share";
 516
 517         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 518                 return undef;
 519         }
 520
 521         $ret->{DC_SERVER} = $dcvars->{SERVER};
 522         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 523         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 524         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 525         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 526         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 527
 528         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 529         $ret->{target} = $self;
 530
 531         return $ret;
 532 }
 533
 534 sub setup_simpleserver($$)
 535 {
 536         my ($self, $path) = @_;
 537
 538         print "PROVISIONING simple server...";
 539
 540         my $prefix_abs = abs_path($path);
 541
 542         my $simpleserver_options = "
 543         lanman auth = yes
 544         vfs objects = xattr_tdb streams_depot
 545         change notify = no
 546
 547 [vfs_aio_fork]
 548         path = $prefix_abs/share
 549         vfs objects = aio_fork
 550         read only = no
 551         vfs_aio_fork:erratic_testing_mode=yes
 552 ";
 553
 554         my $vars = $self->provision($path,
 555                                     "LOCALSHARE4",
 556                                     "local4pass",
 557                                     $simpleserver_options);
 558
 559         $vars or return undef;
 560
 561         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 562                return undef;
 563         }
 564
 565         $self->{vars}->{simpleserver} = $vars;
 566
 567         return $vars;
 568 }
 569
 570 sub setup_fileserver($$)
 571 {
 572         my ($self, $path) = @_;
 573         my $prefix_abs = abs_path($path);
 574         my $srcdir_abs = abs_path($self->{srcdir});
 575
 576         print "PROVISIONING file server ...\n";
 577
 578         my @dirs = ();
 579
 580         mkdir($prefix_abs, 0777);
 581
 582         my $share_dir="$prefix_abs/share";
 583
 584         # Create share directory structure
 585         my $lower_case_share_dir="$share_dir/lower-case";
 586         push(@dirs, $lower_case_share_dir);
 587
 588         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 589         push(@dirs, $lower_case_share_dir_30000);
 590
 591         my $dfree_share_dir="$share_dir/dfree";
 592         push(@dirs, $dfree_share_dir);
 593
 594         my $valid_users_sharedir="$share_dir/valid_users";
 595         push(@dirs,$valid_users_sharedir);
 596
 597         my $offline_sharedir="$share_dir/offline";
 598         push(@dirs,$offline_sharedir);
 599
 600         my $fileserver_options = "
 601 [lowercase]
 602         path = $lower_case_share_dir
 603         comment = smb username is [%U]
 604         case sensitive = True
 605         default case = lower
 606         preserve case = no
 607         short preserve case = no
 608 [lowercase-30000]
 609         path = $lower_case_share_dir_30000
 610         comment = smb username is [%U]
 611         case sensitive = True
 612         default case = lower
 613         preserve case = no
 614         short preserve case = no
 615 [dfree]
 616         path = $dfree_share_dir
 617         comment = smb username is [%U]
 618         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 619 [valid-users-access]
 620         path = $valid_users_sharedir
 621         valid users = +userdup
 622 [offline]
 623         path = $offline_sharedir
 624         vfs objects = offline
 625         ";
 626
 627         my $vars = $self->provision($path,
 628                                     "FILESERVER",
 629                                     "fileserver",
 630                                     $fileserver_options,
 631                                     undef,
 632                                     undef,
 633                                     1);
 634
 635         $vars or return undef;
 636
 637         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 638                return undef;
 639         }
 640
 641         $self->{vars}->{fileserver} = $vars;
 642
 643         mkdir($_, 0777) foreach(@dirs);
 644
 645         ## Create case sensitive lower case share dir
 646         foreach my $file ('a'..'z') {
 647                 my $full_path = $lower_case_share_dir . '/' . $file;
 648                 open my $fh, '>', $full_path;
 649                 # Add some content to file
 650                 print $fh $full_path;
 651                 close $fh;
 652         }
 653
 654         for (my $file = 1; $file < 51; ++$file) {
 655                 my $full_path = $lower_case_share_dir . '/' . $file;
 656                 open my $fh, '>', $full_path;
 657                 # Add some content to file
 658                 print $fh $full_path;
 659                 close $fh;
 660         }
 661
 662         # Create content for 30000 share
 663         foreach my $file ('a'..'z') {
 664                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 665                 open my $fh, '>', $full_path;
 666                 # Add some content to file
 667                 print $fh $full_path;
 668                 close $fh;
 669         }
 670
 671         for (my $file = 1; $file < 30001; ++$file) {
 672                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 673                 open my $fh, '>', $full_path;
 674                 # Add some content to file
 675                 print $fh $full_path;
 676                 close $fh;
 677         }
 678
 679         ##
 680         ## create a listable file in valid_users_share
 681         ##
 682         my $valid_users_target = "$valid_users_sharedir/foo";
 683         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 684                 warn("Unable to open $valid_users_target");
 685                 return undef;
 686         }
 687         close(VALID_USERS_TARGET);
 688         chmod 0644, $valid_users_target;
 689
 690         return $vars;
 691 }
 692
 693 sub setup_ktest($$$)
 694 {
 695         my ($self, $prefix) = @_;
 696
 697         # If we didn't build with ADS, pretend this env was never available
 698         if (not $self->have_ads()) {
 699                 return "UNKNOWN";
 700         }
 701
 702         print "PROVISIONING server with security=ads...";
 703
 704         my $ktest_options = "
 705         workgroup = KTEST
 706         realm = ktest.samba.example.com
 707         security = ads
 708         username map = $prefix/lib/username.map
 709         server signing = required
 710 ";
 711
 712         my $ret = $self->provision($prefix,
 713                                    "LOCALKTEST6",
 714                                    "localktest6pass",
 715                                    $ktest_options);
 716
 717         $ret or return undef;
 718
 719         my $ctx;
 720         my $prefix_abs = abs_path($prefix);
 721         $ctx = {};
 722         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 723         $ctx->{domain} = "KTEST";
 724         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 725         $ctx->{dnsname} = lc($ctx->{realm});
 726         $ctx->{kdc_ipv4} = "0.0.0.0";
 727         $ctx->{kdc_ipv6} = "::";
 728         Samba::mk_krb5_conf($ctx, "");
 729
 730         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 731
 732         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 733         print USERMAP "
 734 $ret->{USERNAME} = KTEST\\Administrator
 735 ";
 736         close(USERMAP);
 737
 738 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 739 #Samba4 DC with the same parameters as are being used here.  The
 740 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 741
 742         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 743         chmod 0600, "$prefix/private/secrets.tdb";
 744
 745 #Make sure there's no old ntdb file.
 746         system("rm -f $prefix/private/secrets.ntdb");
 747
 748 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 749 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 750 #
 751 #and having in krb5.conf:
 752 # ticket_lifetime = 799718400
 753 # renew_lifetime = 799718400
 754 #
 755 # The commands for the -2 keytab where were:
 756 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 757 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 758 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 759 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 760 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 761 #
 762 # and then for the -3 keytab, I did
 763 #
 764 # net changetrustpw; kdestroy and the same again.
 765 #
 766 # This creates a credential cache with a very long lifetime (2036 at
 767 # at 2011-04), and shows that running 'net changetrustpw' does not
 768 # break existing logins (for the secrets.tdb method at least).
 769 #
 770
 771         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 772
 773         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 774         chmod 0600, "$prefix/krb5_ccache-2";
 775
 776         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 777         chmod 0600, "$prefix/krb5_ccache-3";
 778
 779         # We need world access to this share, as otherwise the domain
 780         # administrator from the AD domain provided by ktest can't
 781         # access the share for tests.
 782         chmod 0777, "$prefix/share";
 783
 784         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 785                return undef;
 786         }
 787         return $ret;
 788 }
 789
 790 sub setup_maptoguest($$)
 791 {
 792         my ($self, $path) = @_;
 793
 794         print "PROVISIONING maptoguest...";
 795
 796         my $options = "
 797 map to guest = bad user
 798 ";
 799
 800         my $vars = $self->provision($path,
 801                                     "maptoguest",
 802                                     "maptoguestpass",
 803                                     $options);
 804
 805         $vars or return undef;
 806
 807         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 808                return undef;
 809         }
 810
 811         $self->{vars}->{s3maptoguest} = $vars;
 812
 813         return $vars;
 814 }
 815
 816 sub stop_sig_term($$) {
 817         my ($self, $pid) = @_;
 818         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 819 }
 820
 821 sub stop_sig_kill($$) {
 822         my ($self, $pid) = @_;
 823         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 824 }
 825
 826 sub write_pid($$$)
 827 {
 828         my ($env_vars, $app, $pid) = @_;
 829
 830         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 831         print PID $pid;
 832         close(PID);
 833 }
 834
 835 sub read_pid($$)
 836 {
 837         my ($env_vars, $app) = @_;
 838
 839         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 840         my $pid = <PID>;
 841         close(PID);
 842         return $pid;
 843 }
 844
 845 sub check_or_start($$$$$) {
 846         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 847
 848         # use a pipe for stdin in the child processes. This allows
 849         # those processes to monitor the pipe for EOF to ensure they
 850         # exit when the test script exits
 851         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 852
 853         unlink($env_vars->{NMBD_TEST_LOG});
 854         print "STARTING NMBD...";
 855         my $pid = fork();
 856         if ($pid == 0) {
 857                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 858                 open STDERR, '>&STDOUT';
 859
 860                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 861
 862                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 863                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 864                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 865
 866                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 867                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 868                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 869                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 870                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 871                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 872                 $ENV{UID_WRAPPER_ROOT} = "1";
 873
 874                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 875
 876                 if ($nmbd ne "yes") {
 877                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 878                                 my $signame = shift;
 879                                 print("Skip nmbd received signal $signame");
 880                                 exit 0;
 881                         };
 882                         sleep($self->{server_maxtime});
 883                         exit 0;
 884                 }
 885
 886                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 887                 my @optargs = ("-d0");
 888                 if (defined($ENV{NMBD_OPTIONS})) {
 889                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 890                 }
 891                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 892                 if(defined($ENV{NMBD_VALGRIND})) {
 893                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 894                 }
 895                 my @args = ("-F", "--no-process-group",
 896                             "-s", $env_vars->{SERVERCONFFILE},
 897                             "-l", $env_vars->{LOGDIR});
 898                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 899                         push(@args, "--log-stdout");
 900                 }
 901
 902                 close($env_vars->{STDIN_PIPE});
 903                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 904
 905                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 906                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 907         }
 908         $env_vars->{NMBD_TL_PID} = $pid;
 909         write_pid($env_vars, "nmbd", $pid);
 910         print "DONE\n";
 911
 912         unlink($env_vars->{WINBINDD_TEST_LOG});
 913         print "STARTING WINBINDD...";
 914         $pid = fork();
 915         if ($pid == 0) {
 916                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 917                 open STDERR, '>&STDOUT';
 918
 919                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 920
 921                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 922                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 923                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 924
 925                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 926                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 927                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 928                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 929                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 930                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 931                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 932                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 933                 } else {
 934                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 935                 }
 936                 $ENV{UID_WRAPPER_ROOT} = "1";
 937
 938                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 939
 940                 if ($winbindd ne "yes") {
 941                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 942                                 my $signame = shift;
 943                                 print("Skip winbindd received signal $signame");
 944                                 exit 0;
 945                         };
 946                         sleep($self->{server_maxtime});
 947                         exit 0;
 948                 }
 949
 950                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 951                 my @optargs = ("-d0");
 952                 if (defined($ENV{WINBINDD_OPTIONS})) {
 953                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 954                 }
 955                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 956                 if(defined($ENV{WINBINDD_VALGRIND})) {
 957                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 958                 }
 959                 my @args = ("-F", "--no-process-group",
 960                             "-s", $env_vars->{SERVERCONFFILE},
 961                             "-l", $env_vars->{LOGDIR});
 962                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 963                         push(@args, "--stdout");
 964                 }
 965
 966                 close($env_vars->{STDIN_PIPE});
 967                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 968
 969                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 970                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 971         }
 972         $env_vars->{WINBINDD_TL_PID} = $pid;
 973         write_pid($env_vars, "winbindd", $pid);
 974         print "DONE\n";
 975
 976         unlink($env_vars->{SMBD_TEST_LOG});
 977         print "STARTING SMBD...";
 978         $pid = fork();
 979         if ($pid == 0) {
 980                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 981                 open STDERR, '>&STDOUT';
 982
 983                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 984
 985                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 986                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 987                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 988
 989                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 990                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 991                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 992                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 993                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 994                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 995                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 996                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 997                 } else {
 998                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 999                 }
1000                 $ENV{UID_WRAPPER_ROOT} = "1";
1001
1002                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1003
1004                 if ($smbd ne "yes") {
1005                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1006                                 my $signame = shift;
1007                                 print("Skip smbd received signal $signame");
1008                                 exit 0;
1009                         };
1010                         sleep($self->{server_maxtime});
1011                         exit 0;
1012                 }
1013
1014                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1015                 my @optargs = ("-d0");
1016                 if (defined($ENV{SMBD_OPTIONS})) {
1017                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1018                 }
1019                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1020                 if(defined($ENV{SMBD_VALGRIND})) {
1021                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1022                 }
1023                 my @args = ("-F", "--no-process-group",
1024                             "-s", $env_vars->{SERVERCONFFILE},
1025                             "-l", $env_vars->{LOGDIR});
1026                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1027                         push(@args, "--log-stdout");
1028                 }
1029
1030                 close($env_vars->{STDIN_PIPE});
1031                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1032
1033                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1034                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1035         }
1036         $env_vars->{SMBD_TL_PID} = $pid;
1037         write_pid($env_vars, "smbd", $pid);
1038         print "DONE\n";
1039
1040         close(STDIN_READER);
1041
1042         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1043 }
1044
1045 sub provision($$$$$$$$)
1046 {
1047         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1048
1049         ##
1050         ## setup the various environment variables we need
1051         ##
1052
1053         my $swiface = Samba::get_interface($server);
1054         my %ret = ();
1055         my $server_ip = "127.0.0.$swiface";
1056         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1057         my $domain = "SAMBA-TEST";
1058
1059         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1060         chomp $unix_name;
1061         my $unix_uid = $>;
1062         my $unix_gids_str = $);
1063         my @unix_gids = split(" ", $unix_gids_str);
1064
1065         my $prefix_abs = abs_path($prefix);
1066         my $bindir_abs = abs_path($self->{bindir});
1067
1068         my @dirs = ();
1069
1070         my $shrdir="$prefix_abs/share";
1071         push(@dirs,$shrdir);
1072
1073         my $libdir="$prefix_abs/lib";
1074         push(@dirs,$libdir);
1075
1076         my $piddir="$prefix_abs/pid";
1077         push(@dirs,$piddir);
1078
1079         my $privatedir="$prefix_abs/private";
1080         push(@dirs,$privatedir);
1081
1082         my $lockdir="$prefix_abs/lockdir";
1083         push(@dirs,$lockdir);
1084
1085         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1086         push(@dirs,$eventlogdir);
1087
1088         my $logdir="$prefix_abs/logs";
1089         push(@dirs,$logdir);
1090
1091         my $driver32dir="$shrdir/W32X86";
1092         push(@dirs,$driver32dir);
1093
1094         my $driver64dir="$shrdir/x64";
1095         push(@dirs,$driver64dir);
1096
1097         my $driver40dir="$shrdir/WIN40";
1098         push(@dirs,$driver40dir);
1099
1100         my $ro_shrdir="$shrdir/root-tmp";
1101         push(@dirs,$ro_shrdir);
1102
1103         my $msdfs_shrdir="$shrdir/msdfsshare";
1104         push(@dirs,$msdfs_shrdir);
1105
1106         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1107         push(@dirs,$msdfs_deeppath);
1108
1109         my $badnames_shrdir="$shrdir/badnames";
1110         push(@dirs,$badnames_shrdir);
1111
1112         my $lease1_shrdir="$shrdir/SMB2_10";
1113         push(@dirs,$lease1_shrdir);
1114
1115         my $lease2_shrdir="$shrdir/SMB3_00";
1116         push(@dirs,$lease2_shrdir);
1117
1118         my $manglenames_shrdir="$shrdir/manglenames";
1119         push(@dirs,$manglenames_shrdir);
1120
1121         my $widelinks_shrdir="$shrdir/widelinks";
1122         push(@dirs,$widelinks_shrdir);
1123
1124         my $widelinks_linkdir="$shrdir/widelinks_foo";
1125         push(@dirs,$widelinks_linkdir);
1126
1127         # this gets autocreated by winbindd
1128         my $wbsockdir="$prefix_abs/winbindd";
1129         my $wbsockprivdir="$lockdir/winbindd_privileged";
1130
1131         my $nmbdsockdir="$prefix_abs/nmbd";
1132         unlink($nmbdsockdir);
1133
1134         ##
1135         ## create the test directory layout
1136         ##
1137         die ("prefix_abs = ''") if $prefix_abs eq "";
1138         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1139
1140         mkdir($prefix_abs, 0777);
1141         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1142         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1143             system("rm -rf $prefix_abs/*");
1144         }
1145         mkdir($_, 0777) foreach(@dirs);
1146
1147         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1148
1149         ##
1150         ## lockdir and piddir must be 0755
1151         ##
1152         chmod 0755, $lockdir;
1153         chmod 0755, $piddir;
1154
1155
1156         ##
1157         ## create ro and msdfs share layout
1158         ##
1159
1160         chmod 0755, $ro_shrdir;
1161         my $unreadable_file = "$ro_shrdir/unreadable_file";
1162         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1163                 warn("Unable to open $unreadable_file");
1164                 return undef;
1165         }
1166         close(UNREADABLE_FILE);
1167         chmod 0600, $unreadable_file;
1168
1169         my $msdfs_target = "$ro_shrdir/msdfs-target";
1170         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1171                 warn("Unable to open $msdfs_target");
1172                 return undef;
1173         }
1174         close(MSDFS_TARGET);
1175         chmod 0666, $msdfs_target;
1176         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1177                 "$msdfs_shrdir/msdfs-src1";
1178         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1179
1180         ##
1181         ## create bad names in $badnames_shrdir
1182         ##
1183         ## (An invalid name, would be mangled to 8.3).
1184         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1185         unless (open(BADNAME_TARGET, ">$badname_target")) {
1186                 warn("Unable to open $badname_target");
1187                 return undef;
1188         }
1189         close(BADNAME_TARGET);
1190         chmod 0666, $badname_target;
1191
1192         ## (A bad name, would not be mangled to 8.3).
1193         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1194         unless (open(BADNAME_TARGET, ">$badname_target")) {
1195                 warn("Unable to open $badname_target");
1196                 return undef;
1197         }
1198         close(BADNAME_TARGET);
1199         chmod 0666, $badname_target;
1200
1201         ## (A bad good name).
1202         my $badname_target = "$badnames_shrdir/blank.txt";
1203         unless (open(BADNAME_TARGET, ">$badname_target")) {
1204                 warn("Unable to open $badname_target");
1205                 return undef;
1206         }
1207         close(BADNAME_TARGET);
1208         chmod 0666, $badname_target;
1209
1210         ##
1211         ## create mangleable directory names in $manglenames_shrdir
1212         ##
1213         my $manglename_target = "$manglenames_shrdir/foo:bar";
1214         mkdir($manglename_target, 0777);
1215
1216         ##
1217         ## create symlinks for widelinks tests.
1218         ##
1219         my $widelinks_target = "$widelinks_linkdir/target";
1220         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1221                 warn("Unable to open $widelinks_target");
1222                 return undef;
1223         }
1224         close(WIDELINKS_TARGET);
1225         chmod 0666, $widelinks_target;
1226         ##
1227         ## This link should get ACCESS_DENIED
1228         ##
1229         symlink "$widelinks_target", "$widelinks_shrdir/source";
1230         ##
1231         ## This link should be allowed
1232         ##
1233         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1234
1235         my $conffile="$libdir/server.conf";
1236
1237         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1238         my $nss_wrapper_passwd = "$privatedir/passwd";
1239         my $nss_wrapper_group = "$privatedir/group";
1240         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1241         my $resolv_conf = "$privatedir/resolv.conf";
1242         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1243
1244         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1245
1246         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1247
1248         my @eventlog_list = ("dns server", "application");
1249
1250         ##
1251         ## calculate uids and gids
1252         ##
1253
1254         my ($max_uid, $max_gid);
1255         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1256         my ($uid_pdbtest_wkn);
1257         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1258         my ($gid_userdup, $gid_everyone);
1259
1260         if ($unix_uid < 0xffff - 5) {
1261                 $max_uid = 0xffff;
1262         } else {
1263                 $max_uid = $unix_uid;
1264         }
1265
1266         $uid_root = $max_uid - 1;
1267         $uid_nobody = $max_uid - 2;
1268         $uid_pdbtest = $max_uid - 3;
1269         $uid_pdbtest2 = $max_uid - 4;
1270         $uid_userdup = $max_uid - 5;
1271         $uid_pdbtest_wkn = $max_uid - 6;
1272
1273         if ($unix_gids[0] < 0xffff - 7) {
1274                 $max_gid = 0xffff;
1275         } else {
1276                 $max_gid = $unix_gids[0];
1277         }
1278
1279         $gid_nobody = $max_gid - 1;
1280         $gid_nogroup = $max_gid - 2;
1281         $gid_root = $max_gid - 3;
1282         $gid_domusers = $max_gid - 4;
1283         $gid_domadmins = $max_gid - 5;
1284         $gid_userdup = $max_gid - 6;
1285         $gid_everyone = $max_gid - 7;
1286
1287         ##
1288         ## create conffile
1289         ##
1290
1291         unless (open(CONF, ">$conffile")) {
1292                 warn("Unable to open $conffile");
1293                 return undef;
1294         }
1295         print CONF "
1296 [global]
1297         netbios name = $server
1298         interfaces = $server_ip/8 $server_ipv6/64
1299         bind interfaces only = yes
1300         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1301         smbd:suicide mode = yes
1302
1303         workgroup = $domain
1304
1305         private dir = $privatedir
1306         pid directory = $piddir
1307         lock directory = $lockdir
1308         log file = $logdir/log.\%m
1309         log level = 1
1310         debug pid = yes
1311         max log size = 0
1312
1313         state directory = $lockdir
1314         cache directory = $lockdir
1315
1316         passdb backend = tdbsam
1317
1318         time server = yes
1319
1320         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1321         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1322         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1323         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1324         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1325         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1326         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1327
1328         addprinter command =            $mod_printer_pl -a -s $conffile --
1329         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1330
1331         eventlog list = application \"dns server\"
1332
1333         kernel oplocks = no
1334         kernel change notify = no
1335         smb2 leases = yes
1336
1337         logging = file
1338         printing = bsd
1339         printcap name = /dev/null
1340
1341         winbindd socket directory = $wbsockdir
1342         nmbd:socket dir = $nmbdsockdir
1343         idmap config * : range = 100000-200000
1344         winbind enum users = yes
1345         winbind enum groups = yes
1346         winbind separator = /
1347
1348 #       min receivefile size = 4000
1349
1350         read only = no
1351         server signing = auto
1352
1353         smbd:sharedelay = 100000
1354         smbd:writetimeupdatedelay = 500000
1355         map hidden = no
1356         map system = no
1357         map readonly = no
1358         store dos attributes = yes
1359         create mask = 755
1360         dos filemode = yes
1361         strict rename = yes
1362         strict sync = yes
1363         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1364
1365         printing = vlp
1366         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1367         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1368         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1369         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1370         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1371         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1372         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1373         lpq cache time = 0
1374         print notify backchannel = yes
1375
1376         ncalrpc dir = $prefix_abs/ncalrpc
1377
1378         # The samba3.blackbox.smbclient_s3 test uses this to test that
1379         # sending messages works, and that the %m sub works.
1380         message command = mv %s $shrdir/message.%m
1381
1382         # fsrvp server requires registry shares
1383         registry shares = yes
1384
1385         # Used by RPC SRVSVC tests
1386         add share command = $bindir_abs/smbaddshare
1387         change share command = $bindir_abs/smbchangeshare
1388         delete share command = $bindir_abs/smbdeleteshare
1389
1390         # fruit:copyfile is a global option
1391         fruit:copyfile = yes
1392
1393         # Begin extra options
1394         $extra_options
1395         # End extra options
1396
1397         #Include user defined custom parameters if set
1398 ";
1399
1400         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1401                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1402         }
1403
1404         print CONF "
1405 [tmp]
1406         path = $shrdir
1407         comment = smb username is [%U]
1408 [tmpsort]
1409         path = $shrdir
1410         comment = Load dirsort module
1411         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1412 [tmpenc]
1413         path = $shrdir
1414         comment = encrypt smb username is [%U]
1415         smb encrypt = required
1416         vfs objects = dirsort
1417 [tmpguest]
1418         path = $shrdir
1419         guest ok = yes
1420 [guestonly]
1421         path = $shrdir
1422         guest only = yes
1423         guest ok = yes
1424 [forceuser]
1425         path = $shrdir
1426         force user = $unix_name
1427         guest ok = yes
1428 [forceuser_unixonly]
1429         comment = force a user with unix user SID and group SID
1430         path = $shrdir
1431         force user = pdbtest
1432         guest ok = yes
1433 [forceuser_wkngroup]
1434         comment = force a user with well-known group SID
1435         path = $shrdir
1436         force user = pdbtest_wkn
1437         guest ok = yes
1438 [forcegroup]
1439         path = $shrdir
1440         force group = nogroup
1441         guest ok = yes
1442 [ro-tmp]
1443         path = $ro_shrdir
1444         guest ok = yes
1445 [write-list-tmp]
1446         path = $shrdir
1447         read only = yes
1448         write list = $unix_name
1449 [valid-users-tmp]
1450         path = $shrdir
1451         valid users = $unix_name
1452 [msdfs-share]
1453         path = $msdfs_shrdir
1454         msdfs root = yes
1455         msdfs shuffle referrals = yes
1456         guest ok = yes
1457 [hideunread]
1458         copy = tmp
1459         hide unreadable = yes
1460 [tmpcase]
1461         copy = tmp
1462         case sensitive = yes
1463 [hideunwrite]
1464         copy = tmp
1465         hide unwriteable files = yes
1466 [durable]
1467         copy = tmp
1468         kernel share modes = no
1469         kernel oplocks = no
1470         posix locking = no
1471 [fs_specific]
1472         copy = tmp
1473         $fs_specific_conf
1474 [print1]
1475         copy = tmp
1476         printable = yes
1477
1478 [print2]
1479         copy = print1
1480 [print3]
1481         copy = print1
1482         default devmode = no
1483 [lp]
1484         copy = print1
1485
1486 [nfs4acl_simple]
1487         path = $shrdir
1488         comment = smb username is [%U]
1489         nfs4:mode = simple
1490         vfs objects = nfs4acl_xattr xattr_tdb
1491
1492 [nfs4acl_special]
1493         path = $shrdir
1494         comment = smb username is [%U]
1495         nfs4:mode = special
1496         vfs objects = nfs4acl_xattr xattr_tdb
1497
1498 [xcopy_share]
1499         path = $shrdir
1500         comment = smb username is [%U]
1501         create mask = 777
1502         force create mode = 777
1503 [posix_share]
1504         path = $shrdir
1505         comment = smb username is [%U]
1506         create mask = 0777
1507         force create mode = 0
1508         directory mask = 0777
1509         force directory mode = 0
1510         vfs objects = xattr_tdb
1511 [aio]
1512         copy = tmp
1513         aio read size = 1
1514         aio write size = 1
1515
1516 [print\$]
1517         copy = tmp
1518
1519 [vfs_fruit]
1520         path = $shrdir
1521         vfs objects = catia fruit streams_xattr acl_xattr
1522         ea support = yes
1523         fruit:ressource = file
1524         fruit:metadata = netatalk
1525         fruit:locking = netatalk
1526         fruit:encoding = native
1527
1528 [badname-tmp]
1529         path = $badnames_shrdir
1530         guest ok = yes
1531
1532 [manglenames_share]
1533         path = $manglenames_shrdir
1534         guest ok = yes
1535
1536 [dynamic_share]
1537         path = $shrdir/%R
1538         guest ok = yes
1539
1540 [widelinks_share]
1541         path = $widelinks_shrdir
1542         wide links = no
1543         guest ok = yes
1544
1545 [fsrvp_share]
1546         path = $shrdir
1547         comment = fake shapshots using rsync
1548         vfs objects = shell_snap shadow_copy2
1549         shell_snap:check path command = $fake_snap_pl --check
1550         shell_snap:create command = $fake_snap_pl --create
1551         shell_snap:delete command = $fake_snap_pl --delete
1552         # a relative path here fails, the snapshot dir is no longer found
1553         shadow:snapdir = $shrdir/.snapshots
1554         ";
1555         close(CONF);
1556
1557         ##
1558         ## create a test account
1559         ##
1560
1561         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1562            warn("Unable to open $nss_wrapper_passwd");
1563            return undef;
1564         }
1565         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1566 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1567 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1568 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1569 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1570 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1571 ";
1572         if ($unix_uid != 0) {
1573                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1574 ";
1575         }
1576         close(PASSWD);
1577
1578         unless (open(GROUP, ">$nss_wrapper_group")) {
1579              warn("Unable to open $nss_wrapper_group");
1580              return undef;
1581         }
1582         print GROUP "nobody:x:$gid_nobody:
1583 nogroup:x:$gid_nogroup:nobody
1584 $unix_name-group:x:$unix_gids[0]:
1585 domusers:X:$gid_domusers:
1586 domadmins:X:$gid_domadmins:
1587 userdup:x:$gid_userdup:$unix_name
1588 everyone:x:$gid_everyone:
1589 ";
1590         if ($unix_gids[0] != 0) {
1591                 print GROUP "root:x:$gid_root:
1592 ";
1593         }
1594
1595         close(GROUP);
1596
1597         ## hosts
1598         my $hostname = lc($server);
1599         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1600                 warn("Unable to open $nss_wrapper_hosts");
1601                 return undef;
1602         }
1603         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1604         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1605         close(HOSTS);
1606
1607         ## hosts
1608         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1609                 warn("Unable to open $resolv_conf");
1610                 return undef;
1611         }
1612         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1613                 if (defined($dc_server_ip)) {
1614                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1615                 }
1616                 if (defined($dc_server_ipv6)) {
1617                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1618                 }
1619         } else {
1620                 print RESOLV_CONF "nameserver ${server_ip}\n";
1621                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1622         }
1623         close(RESOLV_CONF);
1624
1625         foreach my $evlog (@eventlog_list) {
1626                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1627                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1628                 close(EVENTLOG);
1629         }
1630
1631         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1632         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1633         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1634         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1635         if ($ENV{SAMBA_DNS_FAKING}) {
1636                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1637         } else {
1638                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1639         }
1640
1641         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1642         unless (open(PWD, "|$cmd")) {
1643              warn("Unable to set password for test account\n$cmd");
1644              return undef;
1645         }
1646         print PWD "$password\n$password\n";
1647         unless (close(PWD)) {
1648              warn("Unable to set password for test account\n$cmd");
1649              return undef;
1650         }
1651         print "DONE\n";
1652
1653         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1654         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1655         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1656         close(DNS_UPDATE_LIST);
1657
1658         $ret{SERVER_IP} = $server_ip;
1659         $ret{SERVER_IPV6} = $server_ipv6;
1660         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1661         $ret{NMBD_TEST_LOG_POS} = 0;
1662         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1663         $ret{WINBINDD_TEST_LOG_POS} = 0;
1664         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1665         $ret{SMBD_TEST_LOG_POS} = 0;
1666         $ret{SERVERCONFFILE} = $conffile;
1667         $ret{CONFIGURATION} ="-s $conffile";
1668         $ret{SERVER} = $server;
1669         $ret{USERNAME} = $unix_name;
1670         $ret{USERID} = $unix_uid;
1671         $ret{DOMAIN} = $domain;
1672         $ret{NETBIOSNAME} = $server;
1673         $ret{PASSWORD} = $password;
1674         $ret{PIDDIR} = $piddir;
1675         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1676         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1677         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1678         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1679         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1680         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1681         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1682         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1683         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1684         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1685         if ($ENV{SAMBA_DNS_FAKING}) {
1686                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1687         } else {
1688                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1689         }
1690         $ret{LOCAL_PATH} = "$shrdir";
1691         $ret{LOGDIR} = $logdir;
1692
1693         #
1694         # Avoid hitting system krb5.conf -
1695         # An env that needs Kerberos will reset this to the real
1696         # value.
1697         #
1698         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
1699
1700         return \%ret;
1701 }
1702
1703 sub wait_for_start($$$$$)
1704 {
1705         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1706         my $ret;
1707
1708         if ($nmbd eq "yes") {
1709                 my $count = 0;
1710
1711                 # give time for nbt server to register its names
1712                 print "checking for nmbd\n";
1713
1714                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1715                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1716
1717                 do {
1718                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1719                         if ($ret != 0) {
1720                                 sleep(1);
1721                         } else {
1722                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1723                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1724                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1725                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1726                         }
1727                         $count++;
1728                 } while ($ret != 0 && $count < 10);
1729                 if ($count == 10) {
1730                         print "NMBD not reachable after 10 retries\n";
1731                         teardown_env($self, $envvars);
1732                         return 0;
1733                 }
1734         }
1735
1736         if ($winbindd eq "yes") {
1737             print "checking for winbindd\n";
1738             my $count = 0;
1739             do {
1740                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1741                 if ($ret != 0) {
1742                     sleep(2);
1743                 }
1744                 $count++;
1745             } while ($ret != 0 && $count < 10);
1746             if ($count == 10) {
1747                 print "WINBINDD not reachable after 20 seconds\n";
1748                 teardown_env($self, $envvars);
1749                 return 0;
1750             }
1751         }
1752
1753         if ($smbd eq "yes") {
1754             # make sure smbd is also up set
1755             print "wait for smbd\n";
1756
1757             my $count = 0;
1758             do {
1759                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1760                 if ($ret != 0) {
1761                     sleep(2);
1762                 }
1763                 $count++
1764             } while ($ret != 0 && $count < 10);
1765             if ($count == 10) {
1766                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1767                 teardown_env($self, $envvars);
1768                 return 0;
1769             }
1770         }
1771
1772         # Ensure we have domain users mapped.
1773         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1774         if ($ret != 0) {
1775             return 1;
1776         }
1777         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1778         if ($ret != 0) {
1779             return 1;
1780         }
1781         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
1782         if ($ret != 0) {
1783             return 1;
1784         }
1785
1786         if ($winbindd eq "yes") {
1787             # note: creating builtin groups requires winbindd for the
1788             # unix id allocator
1789             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1790             if ($ret != 0) {
1791                 print "Failed to create BUILTIN\\Users group\n";
1792                 return 0;
1793             }
1794             my $count = 0;
1795             do {
1796                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1797                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1798                 if ($ret != 0) {
1799                     sleep(2);
1800                 }
1801                 $count++;
1802             } while ($ret != 0 && $count < 10);
1803             if ($count == 10) {
1804                 print "WINBINDD not reachable after 20 seconds\n";
1805                 teardown_env($self, $envvars);
1806                 return 0;
1807             }
1808         }
1809
1810         print $self->getlog_env($envvars);
1811
1812         return 1;
1813 }
1814
1815 1;