selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216         raw NTLMv2 auth = yes
 217
 218         rpc_server:epmapper = external
 219         rpc_server:spoolss = external
 220         rpc_server:lsarpc = external
 221         rpc_server:samr = external
 222         rpc_server:netlogon = external
 223         rpc_server:register_embedded_np = yes
 224         rpc_server:FssagentRpc = external
 225
 226         rpc_daemon:epmd = fork
 227         rpc_daemon:spoolssd = fork
 228         rpc_daemon:lsasd = fork
 229         rpc_daemon:fssd = fork
 230         fss: sequence timeout = 1
 231 ";
 232
 233         my $vars = $self->provision($path,
 234                                     "LOCALNT4DC2",
 235                                     "localntdc2pass",
 236                                     $nt4_dc_options);
 237
 238         $vars or return undef;
 239
 240         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 241                return undef;
 242         }
 243
 244         $vars->{DC_SERVER} = $vars->{SERVER};
 245         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 246         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 247         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 248         $vars->{DC_USERNAME} = $vars->{USERNAME};
 249         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 250
 251         $self->{vars}->{nt4_dc} = $vars;
 252
 253         return $vars;
 254 }
 255
 256 sub setup_nt4_dc_schannel($$)
 257 {
 258         my ($self, $path) = @_;
 259
 260         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 261
 262         my $pdc_options = "
 263         domain master = yes
 264         domain logons = yes
 265         lanman auth = yes
 266
 267         rpc_server:epmapper = external
 268         rpc_server:spoolss = external
 269         rpc_server:lsarpc = external
 270         rpc_server:samr = external
 271         rpc_server:netlogon = external
 272         rpc_server:register_embedded_np = yes
 273
 274         rpc_daemon:epmd = fork
 275         rpc_daemon:spoolssd = fork
 276         rpc_daemon:lsasd = fork
 277
 278         server schannel = yes
 279 ";
 280
 281         my $vars = $self->provision($path,
 282                                     "LOCALNT4DC9",
 283                                     "localntdc9pass",
 284                                     $pdc_options);
 285
 286         $vars or return undef;
 287
 288         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 289                return undef;
 290         }
 291
 292         $vars->{DC_SERVER} = $vars->{SERVER};
 293         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 294         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 295         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 296         $vars->{DC_USERNAME} = $vars->{USERNAME};
 297         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 298
 299         $self->{vars}->{nt4_dc_schannel} = $vars;
 300
 301         return $vars;
 302 }
 303
 304 sub setup_nt4_member($$$)
 305 {
 306         my ($self, $prefix, $nt4_dc_vars) = @_;
 307         my $count = 0;
 308         my $rc;
 309
 310         print "PROVISIONING MEMBER...";
 311
 312         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 313         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 314
 315         my $member_options = "
 316         security = domain
 317         dbwrap_tdb_mutexes:* = yes
 318         ${require_mutexes}
 319 ";
 320         my $ret = $self->provision($prefix,
 321                                    "LOCALNT4MEMBER3",
 322                                    "localnt4member3pass",
 323                                    $member_options);
 324
 325         $ret or return undef;
 326
 327         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 328         do {
 329                 print "Waiting for the LOGON SERVER registration ...\n";
 330                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 331                 if ($rc != 0) {
 332                         sleep(1);
 333                 }
 334                 $count++;
 335         } while ($rc != 0 && $count < 10);
 336         if ($count == 10) {
 337                 print "NMBD not reachable after 10 retries\n";
 338                 teardown_env($self, $ret);
 339                 return 0;
 340         }
 341
 342         my $net = Samba::bindir_path($self, "net");
 343         my $cmd = "";
 344         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 345         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 346         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 347         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 348
 349         if (system($cmd) != 0) {
 350             warn("Join failed\n$cmd");
 351             return undef;
 352         }
 353
 354         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 355                return undef;
 356         }
 357
 358         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 359         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 360         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 361         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 362         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 363         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 364
 365         return $ret;
 366 }
 367
 368 sub setup_admember($$$$)
 369 {
 370         my ($self, $prefix, $dcvars) = @_;
 371
 372         # If we didn't build with ADS, pretend this env was never available
 373         if (not $self->have_ads()) {
 374                 return "UNKNOWN";
 375         }
 376
 377         print "PROVISIONING S3 AD MEMBER...";
 378
 379         my $member_options = "
 380         security = ads
 381         workgroup = $dcvars->{DOMAIN}
 382         realm = $dcvars->{REALM}
 383 ";
 384
 385         my $ret = $self->provision($prefix,
 386                                    "LOCALADMEMBER",
 387                                    "loCalMemberPass",
 388                                    $member_options,
 389                                    $dcvars->{SERVER_IP},
 390                                    $dcvars->{SERVER_IPV6});
 391
 392         $ret or return undef;
 393
 394         close(USERMAP);
 395         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 396         $ret->{REALM} = $dcvars->{REALM};
 397
 398         my $ctx;
 399         my $prefix_abs = abs_path($prefix);
 400         $ctx = {};
 401         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 402         $ctx->{domain} = $dcvars->{DOMAIN};
 403         $ctx->{realm} = $dcvars->{REALM};
 404         $ctx->{dnsname} = lc($dcvars->{REALM});
 405         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 406         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 407         Samba::mk_krb5_conf($ctx, "");
 408
 409         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 410
 411         my $net = Samba::bindir_path($self, "net");
 412         my $cmd = "";
 413         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 414         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 415                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 416         } else {
 417                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 418         }
 419         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 420         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 421         $cmd .= "$net join $ret->{CONFIGURATION}";
 422         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 423
 424         if (system($cmd) != 0) {
 425             warn("Join failed\n$cmd");
 426             return undef;
 427         }
 428
 429         # We need world access to this share, as otherwise the domain
 430         # administrator from the AD domain provided by Samba4 can't
 431         # access the share for tests.
 432         chmod 0777, "$prefix/share";
 433
 434         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 435                 return undef;
 436         }
 437
 438         $ret->{DC_SERVER} = $dcvars->{SERVER};
 439         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 440         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 441         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 442         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 443         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 444
 445         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 446         $ret->{target} = $self;
 447
 448         return $ret;
 449 }
 450
 451 sub setup_admember_rfc2307($$$$)
 452 {
 453         my ($self, $prefix, $dcvars) = @_;
 454
 455         # If we didn't build with ADS, pretend this env was never available
 456         if (not $self->have_ads()) {
 457                 return "UNKNOWN";
 458         }
 459
 460         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 461
 462         my $member_options = "
 463         security = ads
 464         workgroup = $dcvars->{DOMAIN}
 465         realm = $dcvars->{REALM}
 466         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 467         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 468         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 469         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 470         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 471 ";
 472
 473         my $ret = $self->provision($prefix,
 474                                    "RFC2307MEMBER",
 475                                    "loCalMemberPass",
 476                                    $member_options,
 477                                    $dcvars->{SERVER_IP},
 478                                    $dcvars->{SERVER_IPV6});
 479
 480         $ret or return undef;
 481
 482         close(USERMAP);
 483         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 484         $ret->{REALM} = $dcvars->{REALM};
 485
 486         my $ctx;
 487         my $prefix_abs = abs_path($prefix);
 488         $ctx = {};
 489         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 490         $ctx->{domain} = $dcvars->{DOMAIN};
 491         $ctx->{realm} = $dcvars->{REALM};
 492         $ctx->{dnsname} = lc($dcvars->{REALM});
 493         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 494         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 495         Samba::mk_krb5_conf($ctx, "");
 496
 497         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 498
 499         my $net = Samba::bindir_path($self, "net");
 500         my $cmd = "";
 501         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 502         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 503                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 504         } else {
 505                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 506         }
 507         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 508         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 509         $cmd .= "$net join $ret->{CONFIGURATION}";
 510         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 511
 512         if (system($cmd) != 0) {
 513             warn("Join failed\n$cmd");
 514             return undef;
 515         }
 516
 517         # We need world access to this share, as otherwise the domain
 518         # administrator from the AD domain provided by Samba4 can't
 519         # access the share for tests.
 520         chmod 0777, "$prefix/share";
 521
 522         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 523                 return undef;
 524         }
 525
 526         $ret->{DC_SERVER} = $dcvars->{SERVER};
 527         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 528         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 529         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 530         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 531         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 532
 533         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 534         $ret->{target} = $self;
 535
 536         return $ret;
 537 }
 538
 539 sub setup_simpleserver($$)
 540 {
 541         my ($self, $path) = @_;
 542
 543         print "PROVISIONING simple server...";
 544
 545         my $prefix_abs = abs_path($path);
 546
 547         my $simpleserver_options = "
 548         lanman auth = yes
 549         vfs objects = xattr_tdb streams_depot time_audit full_audit
 550         change notify = no
 551
 552 [vfs_aio_fork]
 553         path = $prefix_abs/share
 554         vfs objects = aio_fork
 555         read only = no
 556         vfs_aio_fork:erratic_testing_mode=yes
 557 ";
 558
 559         my $vars = $self->provision($path,
 560                                     "LOCALSHARE4",
 561                                     "local4pass",
 562                                     $simpleserver_options);
 563
 564         $vars or return undef;
 565
 566         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 567                return undef;
 568         }
 569
 570         $self->{vars}->{simpleserver} = $vars;
 571
 572         return $vars;
 573 }
 574
 575 sub setup_fileserver($$)
 576 {
 577         my ($self, $path) = @_;
 578         my $prefix_abs = abs_path($path);
 579         my $srcdir_abs = abs_path($self->{srcdir});
 580
 581         print "PROVISIONING file server ...\n";
 582
 583         my @dirs = ();
 584
 585         mkdir($prefix_abs, 0777);
 586
 587         my $share_dir="$prefix_abs/share";
 588
 589         # Create share directory structure
 590         my $lower_case_share_dir="$share_dir/lower-case";
 591         push(@dirs, $lower_case_share_dir);
 592
 593         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 594         push(@dirs, $lower_case_share_dir_30000);
 595
 596         my $dfree_share_dir="$share_dir/dfree";
 597         push(@dirs, $dfree_share_dir);
 598         push(@dirs, "$dfree_share_dir/subdir1");
 599         push(@dirs, "$dfree_share_dir/subdir2");
 600
 601         my $valid_users_sharedir="$share_dir/valid_users";
 602         push(@dirs,$valid_users_sharedir);
 603
 604         my $offline_sharedir="$share_dir/offline";
 605         push(@dirs,$offline_sharedir);
 606
 607         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 608         push(@dirs, $force_user_valid_users_dir);
 609
 610         my $smbget_sharedir="$share_dir/smbget";
 611         push(@dirs,$smbget_sharedir);
 612
 613         my $fileserver_options = "
 614 [lowercase]
 615         path = $lower_case_share_dir
 616         comment = smb username is [%U]
 617         case sensitive = True
 618         default case = lower
 619         preserve case = no
 620         short preserve case = no
 621 [lowercase-30000]
 622         path = $lower_case_share_dir_30000
 623         comment = smb username is [%U]
 624         case sensitive = True
 625         default case = lower
 626         preserve case = no
 627         short preserve case = no
 628 [dfree]
 629         path = $dfree_share_dir
 630         comment = smb username is [%U]
 631         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 632 [valid-users-access]
 633         path = $valid_users_sharedir
 634         valid users = +userdup
 635 [offline]
 636         path = $offline_sharedir
 637         vfs objects = offline
 638
 639 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 640 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 641 [force_user_valid_users]
 642         path = $force_user_valid_users_dir
 643         comment = force user with valid users combination test share
 644         valid users = +force_user
 645         force user = force_user
 646         force group = everyone
 647         write list = force_user
 648
 649 [smbget]
 650         path = $smbget_sharedir
 651         comment = smb username is [%U]
 652         guest ok = yes
 653 [ign_sysacls]
 654         path = $share_dir
 655         comment = ignore system acls
 656         acl_xattr:ignore system acls = yes
 657 ";
 658
 659         my $vars = $self->provision($path,
 660                                     "FILESERVER",
 661                                     "fileserver",
 662                                     $fileserver_options,
 663                                     undef,
 664                                     undef,
 665                                     1);
 666
 667         $vars or return undef;
 668
 669         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 670                return undef;
 671         }
 672
 673         $self->{vars}->{fileserver} = $vars;
 674
 675         mkdir($_, 0777) foreach(@dirs);
 676
 677         ## Create case sensitive lower case share dir
 678         foreach my $file ('a'..'z') {
 679                 my $full_path = $lower_case_share_dir . '/' . $file;
 680                 open my $fh, '>', $full_path;
 681                 # Add some content to file
 682                 print $fh $full_path;
 683                 close $fh;
 684         }
 685
 686         for (my $file = 1; $file < 51; ++$file) {
 687                 my $full_path = $lower_case_share_dir . '/' . $file;
 688                 open my $fh, '>', $full_path;
 689                 # Add some content to file
 690                 print $fh $full_path;
 691                 close $fh;
 692         }
 693
 694         # Create content for 30000 share
 695         foreach my $file ('a'..'z') {
 696                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 697                 open my $fh, '>', $full_path;
 698                 # Add some content to file
 699                 print $fh $full_path;
 700                 close $fh;
 701         }
 702
 703         for (my $file = 1; $file < 30001; ++$file) {
 704                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 705                 open my $fh, '>', $full_path;
 706                 # Add some content to file
 707                 print $fh $full_path;
 708                 close $fh;
 709         }
 710
 711         ##
 712         ## create a listable file in valid_users_share
 713         ##
 714         my $valid_users_target = "$valid_users_sharedir/foo";
 715         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 716                 warn("Unable to open $valid_users_target");
 717                 return undef;
 718         }
 719         close(VALID_USERS_TARGET);
 720         chmod 0644, $valid_users_target;
 721
 722         return $vars;
 723 }
 724
 725 sub setup_ktest($$$)
 726 {
 727         my ($self, $prefix) = @_;
 728
 729         # If we didn't build with ADS, pretend this env was never available
 730         if (not $self->have_ads()) {
 731                 return "UNKNOWN";
 732         }
 733
 734         print "PROVISIONING server with security=ads...";
 735
 736         my $ktest_options = "
 737         workgroup = KTEST
 738         realm = ktest.samba.example.com
 739         security = ads
 740         username map = $prefix/lib/username.map
 741         server signing = required
 742 ";
 743
 744         my $ret = $self->provision($prefix,
 745                                    "LOCALKTEST6",
 746                                    "localktest6pass",
 747                                    $ktest_options);
 748
 749         $ret or return undef;
 750
 751         my $ctx;
 752         my $prefix_abs = abs_path($prefix);
 753         $ctx = {};
 754         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 755         $ctx->{domain} = "KTEST";
 756         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 757         $ctx->{dnsname} = lc($ctx->{realm});
 758         $ctx->{kdc_ipv4} = "0.0.0.0";
 759         $ctx->{kdc_ipv6} = "::";
 760         Samba::mk_krb5_conf($ctx, "");
 761
 762         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 763
 764         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 765         print USERMAP "
 766 $ret->{USERNAME} = KTEST\\Administrator
 767 ";
 768         close(USERMAP);
 769
 770 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 771 #Samba4 DC with the same parameters as are being used here.  The
 772 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 773
 774         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 775         chmod 0600, "$prefix/private/secrets.tdb";
 776
 777 #Make sure there's no old ntdb file.
 778         system("rm -f $prefix/private/secrets.ntdb");
 779
 780 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 781 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 782 #
 783 #and having in krb5.conf:
 784 # ticket_lifetime = 799718400
 785 # renew_lifetime = 799718400
 786 #
 787 # The commands for the -2 keytab where were:
 788 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 789 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 790 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 791 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 792 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 793 #
 794 # and then for the -3 keytab, I did
 795 #
 796 # net changetrustpw; kdestroy and the same again.
 797 #
 798 # This creates a credential cache with a very long lifetime (2036 at
 799 # at 2011-04), and shows that running 'net changetrustpw' does not
 800 # break existing logins (for the secrets.tdb method at least).
 801 #
 802
 803         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 804
 805         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 806         chmod 0600, "$prefix/krb5_ccache-2";
 807
 808         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 809         chmod 0600, "$prefix/krb5_ccache-3";
 810
 811         # We need world access to this share, as otherwise the domain
 812         # administrator from the AD domain provided by ktest can't
 813         # access the share for tests.
 814         chmod 0777, "$prefix/share";
 815
 816         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 817                return undef;
 818         }
 819         return $ret;
 820 }
 821
 822 sub setup_maptoguest($$)
 823 {
 824         my ($self, $path) = @_;
 825
 826         print "PROVISIONING maptoguest...";
 827
 828         my $options = "
 829 map to guest = bad user
 830 ";
 831
 832         my $vars = $self->provision($path,
 833                                     "maptoguest",
 834                                     "maptoguestpass",
 835                                     $options);
 836
 837         $vars or return undef;
 838
 839         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 840                return undef;
 841         }
 842
 843         $self->{vars}->{s3maptoguest} = $vars;
 844
 845         return $vars;
 846 }
 847
 848 sub stop_sig_term($$) {
 849         my ($self, $pid) = @_;
 850         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 851 }
 852
 853 sub stop_sig_kill($$) {
 854         my ($self, $pid) = @_;
 855         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 856 }
 857
 858 sub write_pid($$$)
 859 {
 860         my ($env_vars, $app, $pid) = @_;
 861
 862         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 863         print PID $pid;
 864         close(PID);
 865 }
 866
 867 sub read_pid($$)
 868 {
 869         my ($env_vars, $app) = @_;
 870
 871         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 872         my $pid = <PID>;
 873         close(PID);
 874         return $pid;
 875 }
 876
 877 sub check_or_start($$$$$) {
 878         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 879
 880         # use a pipe for stdin in the child processes. This allows
 881         # those processes to monitor the pipe for EOF to ensure they
 882         # exit when the test script exits
 883         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 884
 885         unlink($env_vars->{NMBD_TEST_LOG});
 886         print "STARTING NMBD...";
 887         my $pid = fork();
 888         if ($pid == 0) {
 889                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 890                 open STDERR, '>&STDOUT';
 891
 892                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 893
 894                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 895                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 896                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 897
 898                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 899                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 900                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 901                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 902                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 903                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 904                 $ENV{UID_WRAPPER_ROOT} = "1";
 905
 906                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 907
 908                 if ($nmbd ne "yes") {
 909                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 910                                 my $signame = shift;
 911                                 print("Skip nmbd received signal $signame");
 912                                 exit 0;
 913                         };
 914                         sleep($self->{server_maxtime});
 915                         exit 0;
 916                 }
 917
 918                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 919                 my @optargs = ("-d0");
 920                 if (defined($ENV{NMBD_OPTIONS})) {
 921                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 922                 }
 923                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 924                 if(defined($ENV{NMBD_VALGRIND})) {
 925                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 926                 }
 927                 my @args = ("-F", "--no-process-group",
 928                             "-s", $env_vars->{SERVERCONFFILE},
 929                             "-l", $env_vars->{LOGDIR});
 930                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 931                         push(@args, "--log-stdout");
 932                 }
 933
 934                 close($env_vars->{STDIN_PIPE});
 935                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 936
 937                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 938                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 939         }
 940         $env_vars->{NMBD_TL_PID} = $pid;
 941         write_pid($env_vars, "nmbd", $pid);
 942         print "DONE\n";
 943
 944         unlink($env_vars->{WINBINDD_TEST_LOG});
 945         print "STARTING WINBINDD...";
 946         $pid = fork();
 947         if ($pid == 0) {
 948                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 949                 open STDERR, '>&STDOUT';
 950
 951                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 952
 953                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 954                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 955                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 956
 957                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 958                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 959                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 960                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 961                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 962                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 963                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 964                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 965                 } else {
 966                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 967                 }
 968                 $ENV{UID_WRAPPER_ROOT} = "1";
 969
 970                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 971
 972                 if ($winbindd ne "yes") {
 973                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 974                                 my $signame = shift;
 975                                 print("Skip winbindd received signal $signame");
 976                                 exit 0;
 977                         };
 978                         sleep($self->{server_maxtime});
 979                         exit 0;
 980                 }
 981
 982                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 983                 my @optargs = ("-d0");
 984                 if (defined($ENV{WINBINDD_OPTIONS})) {
 985                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 986                 }
 987                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 988                 if(defined($ENV{WINBINDD_VALGRIND})) {
 989                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 990                 }
 991                 my @args = ("-F", "--no-process-group",
 992                             "-s", $env_vars->{SERVERCONFFILE},
 993                             "-l", $env_vars->{LOGDIR});
 994                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 995                         push(@args, "--stdout");
 996                 }
 997
 998                 close($env_vars->{STDIN_PIPE});
 999                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1000
1001                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1002                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1003         }
1004         $env_vars->{WINBINDD_TL_PID} = $pid;
1005         write_pid($env_vars, "winbindd", $pid);
1006         print "DONE\n";
1007
1008         unlink($env_vars->{SMBD_TEST_LOG});
1009         print "STARTING SMBD...";
1010         $pid = fork();
1011         if ($pid == 0) {
1012                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1013                 open STDERR, '>&STDOUT';
1014
1015                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1016
1017                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1018                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1019                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1020
1021                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1022                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1023                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1024                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1025                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1026                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1027                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1028                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1029                 } else {
1030                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1031                 }
1032                 $ENV{UID_WRAPPER_ROOT} = "1";
1033
1034                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1035
1036                 if ($smbd ne "yes") {
1037                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1038                                 my $signame = shift;
1039                                 print("Skip smbd received signal $signame");
1040                                 exit 0;
1041                         };
1042                         sleep($self->{server_maxtime});
1043                         exit 0;
1044                 }
1045
1046                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1047                 my @optargs = ("-d0");
1048                 if (defined($ENV{SMBD_OPTIONS})) {
1049                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1050                 }
1051                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1052                 if(defined($ENV{SMBD_VALGRIND})) {
1053                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1054                 }
1055                 my @args = ("-F", "--no-process-group",
1056                             "-s", $env_vars->{SERVERCONFFILE},
1057                             "-l", $env_vars->{LOGDIR});
1058                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1059                         push(@args, "--log-stdout");
1060                 }
1061
1062                 close($env_vars->{STDIN_PIPE});
1063                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1064
1065                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1066                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1067         }
1068         $env_vars->{SMBD_TL_PID} = $pid;
1069         write_pid($env_vars, "smbd", $pid);
1070         print "DONE\n";
1071
1072         close(STDIN_READER);
1073
1074         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1075 }
1076
1077 sub createuser($$$$)
1078 {
1079         my ($self, $username, $password, $conffile) = @_;
1080         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1081         unless (open(PWD, "|$cmd")) {
1082             warn("Unable to set password for $username account\n$cmd");
1083             return undef;
1084         }
1085         print PWD "$password\n$password\n";
1086         unless (close(PWD)) {
1087             warn("Unable to set password for $username account\n$cmd");
1088             return undef;
1089         }
1090         print "DONE\n";
1091 }
1092
1093 sub provision($$$$$$$$)
1094 {
1095         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1096
1097         ##
1098         ## setup the various environment variables we need
1099         ##
1100
1101         my $swiface = Samba::get_interface($server);
1102         my %ret = ();
1103         my $server_ip = "127.0.0.$swiface";
1104         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1105         my $domain = "SAMBA-TEST";
1106
1107         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1108         chomp $unix_name;
1109         my $unix_uid = $>;
1110         my $unix_gids_str = $);
1111         my @unix_gids = split(" ", $unix_gids_str);
1112
1113         my $prefix_abs = abs_path($prefix);
1114         my $bindir_abs = abs_path($self->{bindir});
1115
1116         my @dirs = ();
1117
1118         my $shrdir="$prefix_abs/share";
1119         push(@dirs,$shrdir);
1120
1121         my $libdir="$prefix_abs/lib";
1122         push(@dirs,$libdir);
1123
1124         my $piddir="$prefix_abs/pid";
1125         push(@dirs,$piddir);
1126
1127         my $privatedir="$prefix_abs/private";
1128         push(@dirs,$privatedir);
1129
1130         my $lockdir="$prefix_abs/lockdir";
1131         push(@dirs,$lockdir);
1132
1133         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1134         push(@dirs,$eventlogdir);
1135
1136         my $logdir="$prefix_abs/logs";
1137         push(@dirs,$logdir);
1138
1139         my $driver32dir="$shrdir/W32X86";
1140         push(@dirs,$driver32dir);
1141
1142         my $driver64dir="$shrdir/x64";
1143         push(@dirs,$driver64dir);
1144
1145         my $driver40dir="$shrdir/WIN40";
1146         push(@dirs,$driver40dir);
1147
1148         my $ro_shrdir="$shrdir/root-tmp";
1149         push(@dirs,$ro_shrdir);
1150
1151         my $msdfs_shrdir="$shrdir/msdfsshare";
1152         push(@dirs,$msdfs_shrdir);
1153
1154         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1155         push(@dirs,$msdfs_deeppath);
1156
1157         my $badnames_shrdir="$shrdir/badnames";
1158         push(@dirs,$badnames_shrdir);
1159
1160         my $lease1_shrdir="$shrdir/SMB2_10";
1161         push(@dirs,$lease1_shrdir);
1162
1163         my $lease2_shrdir="$shrdir/SMB3_00";
1164         push(@dirs,$lease2_shrdir);
1165
1166         my $manglenames_shrdir="$shrdir/manglenames";
1167         push(@dirs,$manglenames_shrdir);
1168
1169         my $widelinks_shrdir="$shrdir/widelinks";
1170         push(@dirs,$widelinks_shrdir);
1171
1172         my $widelinks_linkdir="$shrdir/widelinks_foo";
1173         push(@dirs,$widelinks_linkdir);
1174
1175         my $shadow_tstdir="$shrdir/shadow";
1176         push(@dirs,$shadow_tstdir);
1177         my $shadow_mntdir="$shadow_tstdir/mount";
1178         push(@dirs,$shadow_mntdir);
1179         my $shadow_basedir="$shadow_mntdir/base";
1180         push(@dirs,$shadow_basedir);
1181         my $shadow_shrdir="$shadow_basedir/share";
1182         push(@dirs,$shadow_shrdir);
1183
1184         # this gets autocreated by winbindd
1185         my $wbsockdir="$prefix_abs/winbindd";
1186         my $wbsockprivdir="$lockdir/winbindd_privileged";
1187
1188         my $nmbdsockdir="$prefix_abs/nmbd";
1189         unlink($nmbdsockdir);
1190
1191         ##
1192         ## create the test directory layout
1193         ##
1194         die ("prefix_abs = ''") if $prefix_abs eq "";
1195         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1196
1197         mkdir($prefix_abs, 0777);
1198         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1199         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1200             system("rm -rf $prefix_abs/*");
1201         }
1202         mkdir($_, 0777) foreach(@dirs);
1203
1204         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1205
1206         ##
1207         ## lockdir and piddir must be 0755
1208         ##
1209         chmod 0755, $lockdir;
1210         chmod 0755, $piddir;
1211
1212
1213         ##
1214         ## create ro and msdfs share layout
1215         ##
1216
1217         chmod 0755, $ro_shrdir;
1218         my $unreadable_file = "$ro_shrdir/unreadable_file";
1219         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1220                 warn("Unable to open $unreadable_file");
1221                 return undef;
1222         }
1223         close(UNREADABLE_FILE);
1224         chmod 0600, $unreadable_file;
1225
1226         my $msdfs_target = "$ro_shrdir/msdfs-target";
1227         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1228                 warn("Unable to open $msdfs_target");
1229                 return undef;
1230         }
1231         close(MSDFS_TARGET);
1232         chmod 0666, $msdfs_target;
1233         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1234                 "$msdfs_shrdir/msdfs-src1";
1235         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1236
1237         ##
1238         ## create bad names in $badnames_shrdir
1239         ##
1240         ## (An invalid name, would be mangled to 8.3).
1241         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1242         unless (open(BADNAME_TARGET, ">$badname_target")) {
1243                 warn("Unable to open $badname_target");
1244                 return undef;
1245         }
1246         close(BADNAME_TARGET);
1247         chmod 0666, $badname_target;
1248
1249         ## (A bad name, would not be mangled to 8.3).
1250         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1251         unless (open(BADNAME_TARGET, ">$badname_target")) {
1252                 warn("Unable to open $badname_target");
1253                 return undef;
1254         }
1255         close(BADNAME_TARGET);
1256         chmod 0666, $badname_target;
1257
1258         ## (A bad good name).
1259         my $badname_target = "$badnames_shrdir/blank.txt";
1260         unless (open(BADNAME_TARGET, ">$badname_target")) {
1261                 warn("Unable to open $badname_target");
1262                 return undef;
1263         }
1264         close(BADNAME_TARGET);
1265         chmod 0666, $badname_target;
1266
1267         ##
1268         ## create mangleable directory names in $manglenames_shrdir
1269         ##
1270         my $manglename_target = "$manglenames_shrdir/foo:bar";
1271         mkdir($manglename_target, 0777);
1272
1273         ##
1274         ## create symlinks for widelinks tests.
1275         ##
1276         my $widelinks_target = "$widelinks_linkdir/target";
1277         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1278                 warn("Unable to open $widelinks_target");
1279                 return undef;
1280         }
1281         close(WIDELINKS_TARGET);
1282         chmod 0666, $widelinks_target;
1283         ##
1284         ## This link should get ACCESS_DENIED
1285         ##
1286         symlink "$widelinks_target", "$widelinks_shrdir/source";
1287         ##
1288         ## This link should be allowed
1289         ##
1290         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1291
1292         my $conffile="$libdir/server.conf";
1293         my $dfqconffile="$libdir/dfq.conf";
1294
1295         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1296         my $nss_wrapper_passwd = "$privatedir/passwd";
1297         my $nss_wrapper_group = "$privatedir/group";
1298         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1299         my $resolv_conf = "$privatedir/resolv.conf";
1300         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1301
1302         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1303
1304         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1305
1306         my @eventlog_list = ("dns server", "application");
1307
1308         ##
1309         ## calculate uids and gids
1310         ##
1311
1312         my ($max_uid, $max_gid);
1313         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1314         my ($uid_pdbtest_wkn);
1315         my ($uid_smbget);
1316         my ($uid_force_user);
1317         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1318         my ($gid_userdup, $gid_everyone);
1319         my ($gid_force_user);
1320
1321         if ($unix_uid < 0xffff - 7) {
1322                 $max_uid = 0xffff;
1323         } else {
1324                 $max_uid = $unix_uid;
1325         }
1326
1327         $uid_root = $max_uid - 1;
1328         $uid_nobody = $max_uid - 2;
1329         $uid_pdbtest = $max_uid - 3;
1330         $uid_pdbtest2 = $max_uid - 4;
1331         $uid_userdup = $max_uid - 5;
1332         $uid_pdbtest_wkn = $max_uid - 6;
1333         $uid_force_user = $max_uid - 7;
1334         $uid_smbget = $max_uid - 8;
1335
1336         if ($unix_gids[0] < 0xffff - 8) {
1337                 $max_gid = 0xffff;
1338         } else {
1339                 $max_gid = $unix_gids[0];
1340         }
1341
1342         $gid_nobody = $max_gid - 1;
1343         $gid_nogroup = $max_gid - 2;
1344         $gid_root = $max_gid - 3;
1345         $gid_domusers = $max_gid - 4;
1346         $gid_domadmins = $max_gid - 5;
1347         $gid_userdup = $max_gid - 6;
1348         $gid_everyone = $max_gid - 7;
1349         $gid_force_user = $max_gid - 8;
1350
1351         ##
1352         ## create conffile
1353         ##
1354
1355         unless (open(CONF, ">$conffile")) {
1356                 warn("Unable to open $conffile");
1357                 return undef;
1358         }
1359         print CONF "
1360 [global]
1361         netbios name = $server
1362         interfaces = $server_ip/8 $server_ipv6/64
1363         bind interfaces only = yes
1364         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1365         smbd:suicide mode = yes
1366
1367         workgroup = $domain
1368
1369         private dir = $privatedir
1370         pid directory = $piddir
1371         lock directory = $lockdir
1372         log file = $logdir/log.\%m
1373         log level = 1
1374         debug pid = yes
1375         max log size = 0
1376
1377         state directory = $lockdir
1378         cache directory = $lockdir
1379
1380         passdb backend = tdbsam
1381
1382         time server = yes
1383
1384         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1385         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1386         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1387         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1388         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1389         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1390         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1391
1392         addprinter command =            $mod_printer_pl -a -s $conffile --
1393         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1394
1395         eventlog list = application \"dns server\"
1396
1397         kernel oplocks = no
1398         kernel change notify = no
1399         smb2 leases = yes
1400
1401         logging = file
1402         printing = bsd
1403         printcap name = /dev/null
1404
1405         winbindd socket directory = $wbsockdir
1406         nmbd:socket dir = $nmbdsockdir
1407         idmap config * : range = 100000-200000
1408         winbind enum users = yes
1409         winbind enum groups = yes
1410         winbind separator = /
1411
1412 #       min receivefile size = 4000
1413
1414         read only = no
1415
1416         smbd:sharedelay = 100000
1417         smbd:writetimeupdatedelay = 500000
1418         map hidden = no
1419         map system = no
1420         map readonly = no
1421         store dos attributes = yes
1422         create mask = 755
1423         dos filemode = yes
1424         strict rename = yes
1425         strict sync = yes
1426         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1427
1428         printing = vlp
1429         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1430         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1431         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1432         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1433         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1434         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1435         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1436         lpq cache time = 0
1437         print notify backchannel = yes
1438
1439         ncalrpc dir = $prefix_abs/ncalrpc
1440
1441         # The samba3.blackbox.smbclient_s3 test uses this to test that
1442         # sending messages works, and that the %m sub works.
1443         message command = mv %s $shrdir/message.%m
1444
1445         # fsrvp server requires registry shares
1446         registry shares = yes
1447
1448         # Used by RPC SRVSVC tests
1449         add share command = $bindir_abs/smbaddshare
1450         change share command = $bindir_abs/smbchangeshare
1451         delete share command = $bindir_abs/smbdeleteshare
1452
1453         # fruit:copyfile is a global option
1454         fruit:copyfile = yes
1455
1456         #this does not mean that we use non-secure test env,
1457         #it just means we ALLOW one to be configured.
1458         allow insecure wide links = yes
1459
1460         # Begin extra options
1461         $extra_options
1462         # End extra options
1463
1464         #Include user defined custom parameters if set
1465 ";
1466
1467         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1468                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1469         }
1470
1471         print CONF "
1472 [tmp]
1473         path = $shrdir
1474         comment = smb username is [%U]
1475 [tmpsort]
1476         path = $shrdir
1477         comment = Load dirsort module
1478         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1479 [tmpenc]
1480         path = $shrdir
1481         comment = encrypt smb username is [%U]
1482         smb encrypt = required
1483         vfs objects = dirsort
1484 [tmpguest]
1485         path = $shrdir
1486         guest ok = yes
1487 [guestonly]
1488         path = $shrdir
1489         guest only = yes
1490         guest ok = yes
1491 [forceuser]
1492         path = $shrdir
1493         force user = $unix_name
1494         guest ok = yes
1495 [forceuser_unixonly]
1496         comment = force a user with unix user SID and group SID
1497         path = $shrdir
1498         force user = pdbtest
1499         guest ok = yes
1500 [forceuser_wkngroup]
1501         comment = force a user with well-known group SID
1502         path = $shrdir
1503         force user = pdbtest_wkn
1504         guest ok = yes
1505 [forcegroup]
1506         path = $shrdir
1507         force group = nogroup
1508         guest ok = yes
1509 [ro-tmp]
1510         path = $ro_shrdir
1511         guest ok = yes
1512 [write-list-tmp]
1513         path = $shrdir
1514         read only = yes
1515         write list = $unix_name
1516 [valid-users-tmp]
1517         path = $shrdir
1518         valid users = $unix_name
1519         access based share enum = yes
1520 [msdfs-share]
1521         path = $msdfs_shrdir
1522         msdfs root = yes
1523         msdfs shuffle referrals = yes
1524         guest ok = yes
1525 [hideunread]
1526         copy = tmp
1527         hide unreadable = yes
1528 [tmpcase]
1529         copy = tmp
1530         case sensitive = yes
1531 [hideunwrite]
1532         copy = tmp
1533         hide unwriteable files = yes
1534 [durable]
1535         copy = tmp
1536         kernel share modes = no
1537         kernel oplocks = no
1538         posix locking = no
1539 [fs_specific]
1540         copy = tmp
1541         $fs_specific_conf
1542 [print1]
1543         copy = tmp
1544         printable = yes
1545
1546 [print2]
1547         copy = print1
1548 [print3]
1549         copy = print1
1550         default devmode = no
1551 [lp]
1552         copy = print1
1553
1554 [nfs4acl_simple]
1555         path = $shrdir
1556         comment = smb username is [%U]
1557         nfs4:mode = simple
1558         vfs objects = nfs4acl_xattr xattr_tdb
1559
1560 [nfs4acl_special]
1561         path = $shrdir
1562         comment = smb username is [%U]
1563         nfs4:mode = special
1564         vfs objects = nfs4acl_xattr xattr_tdb
1565
1566 [xcopy_share]
1567         path = $shrdir
1568         comment = smb username is [%U]
1569         create mask = 777
1570         force create mode = 777
1571 [posix_share]
1572         path = $shrdir
1573         comment = smb username is [%U]
1574         create mask = 0777
1575         force create mode = 0
1576         directory mask = 0777
1577         force directory mode = 0
1578         vfs objects = xattr_tdb
1579 [aio]
1580         copy = tmp
1581         aio read size = 1
1582         aio write size = 1
1583
1584 [print\$]
1585         copy = tmp
1586
1587 [vfs_fruit]
1588         path = $shrdir
1589         vfs objects = catia fruit streams_xattr acl_xattr
1590         ea support = yes
1591         fruit:ressource = file
1592         fruit:metadata = netatalk
1593         fruit:locking = netatalk
1594         fruit:encoding = native
1595
1596 [badname-tmp]
1597         path = $badnames_shrdir
1598         guest ok = yes
1599
1600 [manglenames_share]
1601         path = $manglenames_shrdir
1602         guest ok = yes
1603
1604 [dynamic_share]
1605         path = $shrdir/%R
1606         guest ok = yes
1607
1608 [widelinks_share]
1609         path = $widelinks_shrdir
1610         wide links = no
1611         guest ok = yes
1612
1613 [fsrvp_share]
1614         path = $shrdir
1615         comment = fake shapshots using rsync
1616         vfs objects = shell_snap shadow_copy2
1617         shell_snap:check path command = $fake_snap_pl --check
1618         shell_snap:create command = $fake_snap_pl --create
1619         shell_snap:delete command = $fake_snap_pl --delete
1620         # a relative path here fails, the snapshot dir is no longer found
1621         shadow:snapdir = $shrdir/.snapshots
1622
1623 [shadow1]
1624         path = $shadow_shrdir
1625         comment = previous versions snapshots under mount point
1626         vfs objects = shadow_copy2
1627         shadow:mountpoint = $shadow_mntdir
1628
1629 [shadow2]
1630         path = $shadow_shrdir
1631         comment = previous versions snapshots outside mount point
1632         vfs objects = shadow_copy2
1633         shadow:mountpoint = $shadow_mntdir
1634         shadow:snapdir = $shadow_tstdir/.snapshots
1635
1636 [shadow3]
1637         path = $shadow_shrdir
1638         comment = previous versions with subvolume snapshots, snapshots under base dir
1639         vfs objects = shadow_copy2
1640         shadow:mountpoint = $shadow_mntdir
1641         shadow:basedir = $shadow_basedir
1642         shadow:snapdir = $shadow_basedir/.snapshots
1643
1644 [shadow4]
1645         path = $shadow_shrdir
1646         comment = previous versions with subvolume snapshots, snapshots outside mount point
1647         vfs objects = shadow_copy2
1648         shadow:mountpoint = $shadow_mntdir
1649         shadow:basedir = $shadow_basedir
1650         shadow:snapdir = $shadow_tstdir/.snapshots
1651
1652 [shadow5]
1653         path = $shadow_shrdir
1654         comment = previous versions at volume root snapshots under mount point
1655         vfs objects = shadow_copy2
1656         shadow:mountpoint = $shadow_shrdir
1657
1658 [shadow6]
1659         path = $shadow_shrdir
1660         comment = previous versions at volume root snapshots outside mount point
1661         vfs objects = shadow_copy2
1662         shadow:mountpoint = $shadow_shrdir
1663         shadow:snapdir = $shadow_tstdir/.snapshots
1664
1665 [shadow7]
1666         path = $shadow_shrdir
1667         comment = previous versions snapshots everywhere
1668         vfs objects = shadow_copy2
1669         shadow:mountpoint = $shadow_mntdir
1670         shadow:snapdirseverywhere = yes
1671
1672 [shadow8]
1673         path = $shadow_shrdir
1674         comment = previous versions using snapsharepath
1675         vfs objects = shadow_copy2
1676         shadow:mountpoint = $shadow_mntdir
1677         shadow:snapdir = $shadow_tstdir/.snapshots
1678         shadow:snapsharepath = share
1679
1680 [shadow_wl]
1681         path = $shadow_shrdir
1682         comment = previous versions with wide links allowed
1683         vfs objects = shadow_copy2
1684         shadow:mountpoint = $shadow_mntdir
1685         wide links = yes
1686 [dfq]
1687         path = $shrdir/dfree
1688         vfs objects = fake_dfq
1689         admin users = $unix_name
1690         include = $dfqconffile
1691         ";
1692         close(CONF);
1693
1694         unless (open(DFQCONF, ">$dfqconffile")) {
1695                 warn("Unable to open $dfqconffile");
1696                 return undef;
1697         }
1698         close(DFQCONF);
1699
1700         ##
1701         ## create a test account
1702         ##
1703
1704         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1705            warn("Unable to open $nss_wrapper_passwd");
1706            return undef;
1707         }
1708         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1709 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1710 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1711 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1712 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1713 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1714 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
1715 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
1716 ";
1717         if ($unix_uid != 0) {
1718                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1719 ";
1720         }
1721         close(PASSWD);
1722
1723         unless (open(GROUP, ">$nss_wrapper_group")) {
1724              warn("Unable to open $nss_wrapper_group");
1725              return undef;
1726         }
1727         print GROUP "nobody:x:$gid_nobody:
1728 nogroup:x:$gid_nogroup:nobody
1729 $unix_name-group:x:$unix_gids[0]:
1730 domusers:X:$gid_domusers:
1731 domadmins:X:$gid_domadmins:
1732 userdup:x:$gid_userdup:$unix_name
1733 everyone:x:$gid_everyone:
1734 force_user:x:$gid_force_user:
1735 ";
1736         if ($unix_gids[0] != 0) {
1737                 print GROUP "root:x:$gid_root:
1738 ";
1739         }
1740
1741         close(GROUP);
1742
1743         ## hosts
1744         my $hostname = lc($server);
1745         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1746                 warn("Unable to open $nss_wrapper_hosts");
1747                 return undef;
1748         }
1749         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1750         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1751         close(HOSTS);
1752
1753         ## hosts
1754         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1755                 warn("Unable to open $resolv_conf");
1756                 return undef;
1757         }
1758         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1759                 if (defined($dc_server_ip)) {
1760                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1761                 }
1762                 if (defined($dc_server_ipv6)) {
1763                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1764                 }
1765         } else {
1766                 print RESOLV_CONF "nameserver ${server_ip}\n";
1767                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1768         }
1769         close(RESOLV_CONF);
1770
1771         foreach my $evlog (@eventlog_list) {
1772                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1773                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1774                 close(EVENTLOG);
1775         }
1776
1777         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1778         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1779         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1780         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1781         if ($ENV{SAMBA_DNS_FAKING}) {
1782                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1783         } else {
1784                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1785         }
1786
1787         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
1788         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
1789         createuser($self, "smbget_user", $password, $conffile) || die("Unable to create smbget_user");
1790
1791         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1792         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1793         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1794         close(DNS_UPDATE_LIST);
1795
1796         $ret{SERVER_IP} = $server_ip;
1797         $ret{SERVER_IPV6} = $server_ipv6;
1798         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1799         $ret{NMBD_TEST_LOG_POS} = 0;
1800         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1801         $ret{WINBINDD_TEST_LOG_POS} = 0;
1802         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1803         $ret{SMBD_TEST_LOG_POS} = 0;
1804         $ret{SERVERCONFFILE} = $conffile;
1805         $ret{CONFIGURATION} ="-s $conffile";
1806         $ret{SERVER} = $server;
1807         $ret{USERNAME} = $unix_name;
1808         $ret{USERID} = $unix_uid;
1809         $ret{DOMAIN} = $domain;
1810         $ret{NETBIOSNAME} = $server;
1811         $ret{PASSWORD} = $password;
1812         $ret{PIDDIR} = $piddir;
1813         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1814         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1815         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1816         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1817         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1818         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1819         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1820         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1821         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1822         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1823         if ($ENV{SAMBA_DNS_FAKING}) {
1824                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1825         } else {
1826                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1827         }
1828         $ret{LOCAL_PATH} = "$shrdir";
1829         $ret{LOGDIR} = $logdir;
1830
1831         #
1832         # Avoid hitting system krb5.conf -
1833         # An env that needs Kerberos will reset this to the real
1834         # value.
1835         #
1836         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
1837
1838         return \%ret;
1839 }
1840
1841 sub wait_for_start($$$$$)
1842 {
1843         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1844         my $ret;
1845
1846         if ($nmbd eq "yes") {
1847                 my $count = 0;
1848
1849                 # give time for nbt server to register its names
1850                 print "checking for nmbd\n";
1851
1852                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1853                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1854
1855                 do {
1856                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1857                         if ($ret != 0) {
1858                                 sleep(1);
1859                         } else {
1860                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1861                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1862                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1863                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1864                         }
1865                         $count++;
1866                 } while ($ret != 0 && $count < 10);
1867                 if ($count == 10) {
1868                         print "NMBD not reachable after 10 retries\n";
1869                         teardown_env($self, $envvars);
1870                         return 0;
1871                 }
1872         }
1873
1874         if ($winbindd eq "yes") {
1875             print "checking for winbindd\n";
1876             my $count = 0;
1877             do {
1878                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1879                 if ($ret != 0) {
1880                     sleep(2);
1881                 }
1882                 $count++;
1883             } while ($ret != 0 && $count < 10);
1884             if ($count == 10) {
1885                 print "WINBINDD not reachable after 20 seconds\n";
1886                 teardown_env($self, $envvars);
1887                 return 0;
1888             }
1889         }
1890
1891         if ($smbd eq "yes") {
1892             # make sure smbd is also up set
1893             print "wait for smbd\n";
1894
1895             my $count = 0;
1896             do {
1897                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1898                 if ($ret != 0) {
1899                     sleep(2);
1900                 }
1901                 $count++
1902             } while ($ret != 0 && $count < 10);
1903             if ($count == 10) {
1904                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1905                 teardown_env($self, $envvars);
1906                 return 0;
1907             }
1908         }
1909
1910         # Ensure we have domain users mapped.
1911         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1912         if ($ret != 0) {
1913             return 1;
1914         }
1915         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1916         if ($ret != 0) {
1917             return 1;
1918         }
1919         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
1920         if ($ret != 0) {
1921             return 1;
1922         }
1923
1924         if ($winbindd eq "yes") {
1925             # note: creating builtin groups requires winbindd for the
1926             # unix id allocator
1927             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1928             if ($ret != 0) {
1929                 print "Failed to create BUILTIN\\Users group\n";
1930                 return 0;
1931             }
1932             my $count = 0;
1933             do {
1934                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1935                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1936                 if ($ret != 0) {
1937                     sleep(2);
1938                 }
1939                 $count++;
1940             } while ($ret != 0 && $count < 10);
1941             if ($count == 10) {
1942                 print "WINBINDD not reachable after 20 seconds\n";
1943                 teardown_env($self, $envvars);
1944                 return 0;
1945             }
1946         }
1947
1948         print $self->getlog_env($envvars);
1949
1950         return 1;
1951 }
1952
1953 1;