Linus Torvalds [Mon, 4 Sep 2017 17:51:02 +0000 (10:51 -0700)]
Merge branch 'x86-boot-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main changes are KASL related fixes and cleanups: in particular we
now exclude certain physical memory ranges as KASLR randomization
targets that have proven to be unreliable (early-)RAM on some firmware
versions"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/KASLR: Work around firmware bugs by excluding EFI_BOOT_SERVICES_* and EFI_LOADER_* from KASLR's choice
x86/boot/KASLR: Prefer mirrored memory regions for the kernel physical address
efi: Introduce efi_early_memdesc_ptr to get pointer to memmap descriptor
x86/boot/KASLR: Rename process_e820_entry() into process_mem_region()
x86/boot/KASLR: Switch to pass struct mem_vector to process_e820_entry()
x86/boot/KASLR: Wrap e820 entries walking code into new function process_e820_entries()
Linus Torvalds [Mon, 4 Sep 2017 16:52:57 +0000 (09:52 -0700)]
Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
- Introduce the ORC unwinder, which can be enabled via
CONFIG_ORC_UNWINDER=y.
The ORC unwinder is a lightweight, Linux kernel specific debuginfo
implementation, which aims to be DWARF done right for unwinding.
Objtool is used to generate the ORC unwinder tables during build, so
the data format is flexible and kernel internal: there's no
dependency on debuginfo created by an external toolchain.
The ORC unwinder is almost two orders of magnitude faster than the
(out of tree) DWARF unwinder - which is important for perf call graph
profiling. It is also significantly simpler and is coded defensively:
there has not been a single ORC related kernel crash so far, even
with early versions. (knock on wood!)
But the main advantage is that enabling the ORC unwinder allows
CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
measurably:
With frame pointers disabled, GCC does not have to add frame pointer
instrumentation code to every function in the kernel. The kernel's
.text size decreases by about 3.2%, resulting in better cache
utilization and fewer instructions executed, resulting in a broad
kernel-wide speedup. Average speedup of system calls should be
roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
a speedup of 5-10% for some function execution intense workloads.
The main cost of the unwinder is that the unwinder data has to be
stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
config - which is a modest cost on modern x86 systems.
Given how young the ORC unwinder code is it's not enabled by default
- but given the performance advantages the plan is to eventually make
it the default unwinder on x86.
See Documentation/x86/orc-unwinder.txt for more details.
- Remove lguest support: its intended role was that of a temporary
proof of concept for virtualization, plus its removal will enable the
reduction (removal) of the paravirt API as well, so Rusty agreed to
its removal. (Juergen Gross)
- Clean up and fix FSGS related functionality (Andy Lutomirski)
- Clean up IO access APIs (Andy Shevchenko)
- Enhance the symbol namespace (Jiri Slaby)
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
objtool: Handle GCC stack pointer adjustment bug
x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
x86/fpu/math-emu: Add ENDPROC to functions
x86/boot/64: Extract efi_pe_entry() from startup_64()
x86/boot/32: Extract efi_pe_entry() from startup_32()
x86/lguest: Remove lguest support
x86/paravirt/xen: Remove xen_patch()
objtool: Fix objtool fallthrough detection with function padding
x86/xen/64: Fix the reported SS and CS in SYSCALL
objtool: Track DRAP separately from callee-saved registers
objtool: Fix validate_branch() return codes
x86: Clarify/fix no-op barriers for text_poke_bp()
x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
selftests/x86/fsgsbase: Test selectors 1, 2, and 3
x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
x86/asm/32: Fix regs_get_register() on segment registers
x86/xen/64: Rearrange the SYSCALL entries
x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
...
Linus Torvalds [Mon, 4 Sep 2017 16:10:24 +0000 (09:10 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- fix affine wakeups (Peter Zijlstra)
- improve CPU onlining (and general bootup) scalability on systems
with ridiculous number (thousands) of CPUs (Peter Zijlstra)
- sched/numa updates (Rik van Riel)
- sched/deadline updates (Byungchul Park)
- sched/cpufreq enhancements and related cleanups (Viresh Kumar)
- sched/debug enhancements (Xie XiuQi)
- various fixes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
sched/debug: Optimize sched_domain sysctl generation
sched/topology: Avoid pointless rebuild
sched/topology, cpuset: Avoid spurious/wrong domain rebuilds
sched/topology: Improve comments
sched/topology: Fix memory leak in __sdt_alloc()
sched/completion: Document that reinit_completion() must be called after complete_all()
sched/autogroup: Fix error reporting printk text in autogroup_create()
sched/fair: Fix wake_affine() for !NUMA_BALANCING
sched/debug: Intruduce task_state_to_char() helper function
sched/debug: Show task state in /proc/sched_debug
sched/debug: Use task_pid_nr_ns in /proc/$pid/sched
sched/core: Remove unnecessary initialization init_idle_bootup_task()
sched/deadline: Change return value of cpudl_find()
sched/deadline: Make find_later_rq() choose a closer CPU in topology
sched/numa: Scale scan period with tasks in group and shared/private
sched/numa: Slow down scan rate if shared faults dominate
sched/pelt: Fix false running accounting
sched: Mark pick_next_task_dl() and build_sched_domain() as static
sched/cpupri: Don't re-initialize 'struct cpupri'
sched/deadline: Don't re-initialize 'struct cpudl'
...
Linus Torvalds [Mon, 4 Sep 2017 16:08:56 +0000 (09:08 -0700)]
Merge branch 'ras-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS fix from Ingo Molnar:
"A single change fixing SMCA bank initialization on systems that don't
have CPU0 enabled"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/AMD: Allow any CPU to initialize the smca_banks array
Linus Torvalds [Mon, 4 Sep 2017 15:39:02 +0000 (08:39 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add branch type profiling/tracing support. (Jin Yao)
- Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of
physical memory addresses, where the PMU supports it. (Kan Liang)
- Export some PMU capability details in the new
/sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi
Kleen)
- Aux data fixes and updates (Will Deacon)
- kprobes fixes and updates (Masami Hiramatsu)
- AMD uncore PMU driver fixes and updates (Janakarajan Natarajan)
On the tooling side, here's a (limited!) list of highlights - there
were many other changes that I could not list, see the shortlog and
git history for details:
UI improvements:
- Implement a visual marker for fused x86 instructions in the
annotate TUI browser, available now in 'perf report', more work
needed to have it available as well in 'perf top' (Jin Yao)
Further explanation from one of Jin's patches:
│ ┌──cmpl $0x0,argp_program_version_hook
81.93 │ ├──je 20
│ │ lock cmpxchg %esi,0x38a9a4(%rip)
│ │↓ jne 29
│ │↓ jmp 43
11.47 │20:└─→cmpxch %esi,0x38a999(%rip)
That means the cmpl+je is a fused instruction pair and they should
be considered together.
- Record the branch type and then show statistics and info about in
callchain entries (Jin Yao)
Example from one of Jin's patches:
# perf record -g -j any,save_type
# perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
namespaces support:
- Add initial support for namespaces, using setns to access files in
namespaces, grabbing their build-ids, etc. (Krister Johansen)
perf trace enhancements:
- Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace'
(Arnaldo Carvalho de Melo)
- Add initial 'clone' syscall args beautifier in 'perf trace'
(Arnaldo Carvalho de Melo)
- Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace'
(Arnaldo Carvalho de Melo)
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de
Melo)
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data'
CTF conversion, allowing CTF trace visualization tools to show
callchains and to resolve symbols (Geneviève Bastien)
- Beautify the fcntl syscall, which is an interesting one in the
sense that infrastructure had to be put in place to change the
formatters of some arguments according to the value in a previous
one, i.e. cmd dictates how arg and the syscall return will be
formatted. (Arnaldo Carvalho de Melo
perf stat enhancements:
- Use group read for event groups in 'perf stat', reducing overhead
when groups are defined in the event specification, i.e. when using
{} to enclose a list of events, asking them to be read at the same
time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
pipe mode improvements:
- Process tracing data in 'perf annotate' pipe mode (David
Carrillo-Cisneros)
- Add header record types to pipe-mode, now this command:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
Will show the same as in non-pipe mode, i.e. involving a perf.data
file (David Carrillo-Cisneros)
Vendor specific hardware event support updates/enhancements:
- Update POWER9 vendor events tables (Sukadev Bhattiprolu)
- Add POWER9 PMU events Sukadev (Bhattiprolu)
- Support additional POWER8+ PVR in PMU mapfile (Shriya)
- Add Skylake server uncore JSON vendor events (Andi Kleen)
- Support exporting Intel PT data to sqlite3 with python perf
scripts, this is in addition to the postgresql support that was
already there (Adrian Hunter)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (253 commits)
perf symbols: Fix plt entry calculation for ARM and AARCH64
perf probe: Fix kprobe blacklist checking condition
perf/x86: Fix caps/ for !Intel
perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR
perf/core, pt, bts: Get rid of itrace_started
perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
tools headers: Sync cpu features kernel ABI headers with tooling headers
perf tools: Pass full path of FEATURES_DUMP
perf tools: Robustify detection of clang binary
tools lib: Allow external definition of CC, AR and LD
perf tools: Allow external definition of flex and bison binary names
tools build tests: Don't hardcode gcc name
perf report: Group stat values on global event id
perf values: Zero value buffers
perf values: Fix allocation check
perf values: Fix thread index bug
perf report: Add dump_read function
perf record: Set read_format for inherit_stat
perf c2c: Fix remote HITM detection for Skylake
perf tools: Fix static build with newer toolchains
...
Linus Torvalds [Mon, 4 Sep 2017 15:13:52 +0000 (08:13 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
Linus Torvalds [Mon, 4 Sep 2017 15:11:52 +0000 (08:11 -0700)]
Merge branch 'core-debugobjects-for-linus' of git://git./linux/kernel/git/tip/tip
Pull debugobjects fix from Ingo Molnar:
"A single commit making debugobjects interact better with kmemleak"
* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Make kmemleak ignore debug objects
Linus Torvalds [Mon, 4 Sep 2017 04:07:29 +0000 (21:07 -0700)]
Merge branch 'docs-next' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"After a fair amount of churn in the last couple of cycles, docs are
taking it easier this time around. Lots of fixes and some new
documentation, but nothing all that radical. Perhaps the most
interesting change for many is the scripts/sphinx-pre-install tool
from Mauro; it will tell you exactly which packages you need to
install to get a working docs toolchain on your system.
There are two little patches reaching outside of Documentation/; both
just tweak kerneldoc comments to eliminate warnings and fix some
dangling doc pointers"
* 'docs-next' of git://git.lwn.net/linux: (52 commits)
Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
genalloc: Fix an incorrect kerneldoc comment
doc: Add documentation for the genalloc subsystem
assoc_array: fix path to assoc_array documentation
kernel-doc parser mishandles declarations split into lines
docs: ReSTify table of contents in core.rst
docs: process: drop git snapshots from applying-patches.rst
Documentation:input: fix typo
swap: Remove obsolete sentence
sphinx.rst: Allow Sphinx version 1.6 at the docs
docs-rst: fix verbatim font size on tables
Documentation: stable-kernel-rules: fix broken git urls
rtmutex: update rt-mutex
rtmutex: update rt-mutex-design
docs: fix minimal sphinx version in conf.py
docs: fix nested numbering in the TOC
NVMEM documentation fix: A minor typo
docs-rst: pdf: use same vertical margin on all Sphinx versions
doc: Makefile: if sphinx is not found, run a check script
docs: Fix paths in security/keys
...
Linus Torvalds [Mon, 4 Sep 2017 01:43:20 +0000 (18:43 -0700)]
Merge tag 'hwmon-for-linus-v4.14' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- new drivers:
- Lantiq CPU temperature sensor
- IBM CFF power supply
- TPS53679 PMBus driver
- new support:
- LM5066I (lm25066 PMBus driver)
- Intel VID protocol VR13 (PMBus drivers)
- CAT34TS02C, GT30TS00, GT34TS02, and CAT34TS04 (jc42 driver)
- cleanup and minor improvements in several drivers
* tag 'hwmon-for-linus-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
hwmon: (ltq-cputemp) add cpu temp sensor driver
hwmon: (ltq-cputemp) add devicetree bindings documentation
hwmon: (pmbus) Add support for Texas Instruments tps53679 device
hwmon: (asc7621) make several arrays static const
hwmon: (pmbus/lm25066) Add support for TI LM5066I
hwmon: (pmbus/lm25066) Offset coefficient depends on CL
hwmon: (pmbus) Add support for Intel VID protocol VR13
Documentation: hwmon: Document the IBM CFF power supply
hwmon: (pmbus) Add IBM Common Form Factor (CFF) power supply driver
dt-bindings: hwmon: Document the IBM CCF power supply version 1
hwmon: (ftsteutates) constify i2c_device_id
hwmon: da9052: Add support for TSI channel
mfd: da9052: Make touchscreen registration optional
hwmon: da9052: Replace S_IRUGO with 0444
mfd: da9052: Add register details for TSI
hwmon: (aspeed-pwm) add THERMAL dependency
hwmon: (pmbus) Add debugfs for status registers
hwmon: (aspeed-pwm-tacho) cooling device support.
Documentation: dt-bindings: aspeed-pwm-tacho cooling device.
hwmon: (pmbus): Add generic alarm bit for iin and pin
...
Linus Torvalds [Mon, 4 Sep 2017 00:49:17 +0000 (17:49 -0700)]
Merge tag 'for-linus-ioctl' of git://git./linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is a big pull request.
Of note is that I'm sending you the new ioctl API for the rdma
subsystem. We put it up on linux-api@, but didn't get much response.
The API is complex, but it solves two different problems in one go:
1) The bi-directional nature of the RDMA file write calls, which
created the security hole we had to handle (and for which the fix
is now causing problems for systems in production, we were a bit
over zealous in the fix and the ability to open a device, then
fork, then create new queue pairs on the device and use them is
broken).
2) The bloat caused by different vendors implementing extensions to
the base verbs API. Each vendor's hardware is slightly different,
and the hardware might be suitable for one extension but not
another.
By the time we add generic extensions for all the different ways
that the different hardware can offload things, the API becomes
bloated. Things like our completion structs have started to exceed
a cache line in size because of all the elements needed to support
this. That in turn shows up heavily in the performance graphs with
a noticable drop in performance on 100Gigabit links as our
completion structs go from occupying one cache line to 1+.
This API makes things like the completion structs modular in a
very similar way to netlink so that your structs can only include
the items needed for the offloads/features you are actually using
on a given queue pair. In that way we support everything, but only
use what we need, and our structs stay smaller.
The ioctl API is better explained by the posting on linux-api@ than I
can explain it here, so I'll just leave it at that.
The rest of the pull request is typical stuff.
Updates for 4.14 kernel merge window
- Lots of hfi1 driver updates (mixed with a few qib and core updates
as well)
- rxe updates
- various mlx updates
- Set default roce type to RoCEv2
- Several larger fixes for bnxt_re that were too big for -rc
- Several larger fixes for qedr that, likewise, were too big for -rc
- Misc core changes
- Make the hns_roce driver compilable on arches other than aarch64 so
we can more easily debug build issues related to it
- Add rdma-netlink infrastructure updates
- Add automatic IRQ affinity infrastructure
- Add 32bit lid support
- Lots of misc fixes across the subsystem from random people
- Autoloading of RDMA netlink modules
- PCI pool cleanups from Romain Perier
- mlx5 driver feature additions and fixes
- Hardware tag matchine feature
- Fix sleeping in atomic when resolving roce ah
- Add experimental ioctl interface as posted to linux-api@"
* tag 'for-linus-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (328 commits)
IB/core: Expose ioctl interface through experimental Kconfig
IB/core: Assign root to all drivers
IB/core: Add completion queue (cq) object actions
IB/core: Add legacy driver's user-data
IB/core: Export ioctl enum types to user-space
IB/core: Explicitly destroy an object while keeping uobject
IB/core: Add macros for declaring methods and attributes
IB/core: Add uverbs merge trees functionality
IB/core: Add DEVICE object and root tree structure
IB/core: Declare an object instead of declaring only type attributes
IB/core: Add new ioctl interface
RDMA/vmw_pvrdma: Fix a signedness
RDMA/vmw_pvrdma: Report network header type in WC
IB/core: Add might_sleep() annotation to ib_init_ah_from_wc()
IB/cm: Fix sleeping in atomic when RoCE is used
IB/core: Add support to finalize objects in one transaction
IB/core: Add a generic way to execute an operation on a uobject
Documentation: Hardware tag matching
IB/mlx5: Support IB_SRQT_TM
net/mlx5: Add XRQ support
...
Linus Torvalds [Mon, 4 Sep 2017 00:02:26 +0000 (17:02 -0700)]
Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.14 merge window.
I'm sending this early, as my continuing journey into fatherhood is
occurring really soon now, I'm going to be mostly useless for the next
couple of weeks, though I may be able to read email, I doubt I'll be
doing much patch applications or git sending. If anything urgent pops
up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
you.
Outside drm changes:
Some rcar-du updates that touch the V4L tree, all acks should be in
place. It adds one export to the radix tree code for new i915 use
case. There are some minor AGP cleanups (don't see that too often).
Changes to the vbox driver in staging to avoid breaking compilation.
Summary:
core:
- Atomic helper fixes
- Atomic UAPI fixes
- Add YCBCR 4:2:0 support
- Drop set_busid hook
- Refactor fb_helper locking
- Remove a bunch of internal APIs
- Add a bunch of better default handlers
- Format modifier/blob plane property added
- More internal header refactoring
- Make more internal API names consistent
- Enhanced syncobj APIs (wait/signal/reset/create signalled)
bridge:
- Add Synopsys Designware MIPI DSI host bridge driver
tiny:
- Add Pervasive Displays RePaper displays
- Add support for LEGO MINDSTORMS EV3 LCD
i915:
- Lots of GEN10/CNL support patches
- drm syncobj support
- Skylake+ watermark refactoring
- GVT vGPU 48-bit ppgtt support
- GVT performance improvements
- NOA change ioctl
- CCS (color compression) scanout support
- GPU reset improvements
amdgpu:
- Initial hugepage support
- BO migration logic rework
- Vega10 improvements
- Powerplay fixes
- Stop reprogramming the MC
- Fixes for ACP audio on stoney
- SR-IOV fixes/improvements
- Command submission overhead improvements
amdkfd:
- Non-dGPU upstreaming patches
- Scratch VA ioctl
- Image tiling modes
- Update PM4 headers for new firmware
- Drop all BUG_ONs.
nouveau:
- GP108 modesetting support.
- Disable MSI on big endian.
vmwgfx:
- Add fence fd support.
msm:
- Runtime PM improvements
exynos:
- NV12MT support
- Refactor KMS drivers
imx-drm:
- Lock scanout channel to improve memory bw
- Cleanups
etnaviv:
- GEM object population fixes
tegra:
- Prep work for Tegra186 support
- PRIME mmap support
sunxi:
- HDMI support improvements
- HDMI CEC support
omapdrm:
- HDMI hotplug IRQ support
- Big driver cleanup
- OMAP5 DSI support
rcar-du:
- vblank fixes
- VSP1 updates
arcgpu:
- Minor fixes
stm:
- Add STM32 DSI controller driver
dw_hdmi:
- Add support for Rockchip RK3399
- HDMI CEC support
atmel-hlcdc:
- Add 8-bit color support
vc4:
- Atomic fixes
- New ioctl to attach a label to a buffer object
- HDMI CEC support
- Allow userspace to dictate rendering order on submit ioctl"
* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
drm/syncobj: Add a signal ioctl (v3)
drm/syncobj: Add a reset ioctl (v3)
drm/syncobj: Add a syncobj_array_find helper
drm/syncobj: Allow wait for submit and signal behavior (v5)
drm/syncobj: Add a CREATE_SIGNALED flag
drm/syncobj: Add a callback mechanism for replace_fence (v3)
drm/syncobj: add sync obj wait interface. (v8)
i915: Use drm_syncobj_fence_get
drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
drm/syncobj: Rename fence_get to find_fence
drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
...
Linus Torvalds [Sun, 3 Sep 2017 23:09:03 +0000 (16:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"Loose ends and regressions from the last merge window.
Strictly speaking, only binfmt_flat thing is a build regression per
se - the rest is 'only sparse cares about that' stuff"
[ This came in before the 4.13 release and could have gone there, but it
was late in the release and nothing seemed critical enough to care, so
I'm pulling it in the 4.14 merge window instead - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp()
compat_hdio_ioctl: Fix a declaration
<linux/uaccess.h>: Fix copy_in_user() declaration
annotate RWF_... flags
teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments
Linus Torvalds [Sun, 3 Sep 2017 20:56:17 +0000 (13:56 -0700)]
Linux 4.13
Linus Torvalds [Sun, 3 Sep 2017 16:50:26 +0000 (09:50 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"The two indirect syscall fixes have sat in linux-next for a few days.
I did check back with a hardware designer to ensure a SYNC is really
what's required for the GIC fix and so the GIC fix didn't make it into
to linux-next in time for this final pull request.
It builds in local build tests and passes Imagination's test system"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
irqchip: mips-gic: SYNC after enabling GIC region
MIPS: Remove pt_regs adjustments in indirect syscall handler
MIPS: seccomp: Fix indirect syscall args
Linus Torvalds [Sun, 3 Sep 2017 16:35:21 +0000 (09:35 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Expand the space for uncompressing as the LZ4 worst case does not fit
into the currently reserved space
- Validate boot parameters more strictly to prevent out of bound access
in the decompressor/boot code
- Fix off by one errors in get_segment_base()
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Prevent faulty bootparams.screeninfo from causing harm
x86/boot: Provide more slack space during decompression
x86/ldt: Fix off by one in get_segment_base()
Linus Torvalds [Sun, 3 Sep 2017 16:30:40 +0000 (09:30 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for a thinko in the raw timekeeper update which causes
clock MONOTONIC_RAW to run with erratically increased frequency"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix ktime_get_raw() incorrect base accumulation
Linus Torvalds [Sun, 3 Sep 2017 16:23:23 +0000 (09:23 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Prevent a potential inconistency in the perf user space access which
might lead to evading sanity checks.
- Prevent perf recording function trace entries twice
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/ftrace: Fix double traces of perf on ftrace:function
perf/core: Fix potential double-fetch bug
Linus Torvalds [Sat, 2 Sep 2017 03:57:27 +0000 (20:57 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs version warning fix from Steve French:
"As requested, additional kernel warning messages to clarify the
default dialect changes"
[ There is still some discussion about exactly which version should be
the new default. Longer-term we have auto-negotiation coming, but
that's not there yet.. - Linus ]
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Fix warning messages when mounting to older servers
Linus Torvalds [Sat, 2 Sep 2017 00:16:40 +0000 (17:16 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A couple of late-arriving fixes before final 4.13:
- A few reverts of DT bindings on Allwinner for their ethernet
driver. Discussion didn't converge, and since bindings are
considered ABI it makes sense to revert instead of having to
support two bindings long-term.
- A fix to enumerate GPIOs properly on Marvell Armada AP806"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
Olof Johansson [Fri, 1 Sep 2017 23:37:02 +0000 (16:37 -0700)]
Merge tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.13 (part 3)
Fix number of GPIOs in AP806 description for Armada 7K/8K
* tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Fri, 1 Sep 2017 22:03:13 +0000 (15:03 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The ismt driver had a problem with a rarely used transaction type and
the designware driver was made even more robust against non standard
ACPI tables"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Round down ACPI provided clk to nearest supported clk
i2c: ismt: Return EMSGSIZE for block reads with bogus length
i2c: ismt: Don't duplicate the receive length for block reads
Oleg Nesterov [Fri, 1 Sep 2017 16:55:33 +0000 (18:55 +0200)]
epoll: fix race between ep_poll_callback(POLLFREE) and ep_free()/ep_remove()
The race was introduced by me in commit
971316f0503a ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead"). I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().
Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.
TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.
Hopefully this explains use-after-free reported by syzcaller:
BUG: KASAN: use-after-free in debug_spin_lock_before
...
_raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148
this is spin_lock(eventpoll->lock),
...
Freed by task 17774:
...
kfree+0xe8/0x2c0 mm/slub.c:3883
ep_free+0x22c/0x2a0 fs/eventpoll.c:865
Fixes: 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead")
Reported-by: 范龙飞 <long7573@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Sep 2017 19:49:03 +0000 (12:49 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
Borkmann.
2) IPSEC ESP error paths leak memory, from Steffen Klassert.
3) We need an RCU grace period before freeing fib6_node objects, from
Wei Wang.
4) Must check skb_put_padto() return value in HSR driver, from FLorian
Fainelli.
5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
Jeffery.
6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
Dumazet.
7) Use after free when tcf_chain_destroy() called multiple times, from
Jiri Pirko.
8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.
9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
From Stefano Brivio.
10) L2TP tunnel refcount fixes from Guillaume Nault.
11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
Kauperman.
12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
phy_stop_machine(), it causes regressions for multiple people. From
Florian Fainelli.
13) When packets are sent out of br0 we have to clear the
offload_fwdq_mark value.
14) Several NULL pointer deref fixes in packet schedulers when their
->init() routine fails. From Nikolay Aleksandrov.
15) Aquantium devices cannot checksum offload correctly when the packet
is <= 60 bytes. From Pavel Belous.
16) Fix vnet header access past end of buffer in AF_PACKET, from
Benjamin Poirier.
17) Double free in probe error paths of nfp driver, from Dan Carpenter.
18) QOS capability not checked properly in DCB init paths of mlx5
driver, from Huy Nguyen.
19) Fix conflicts between firmware load failure and health_care timer in
mlx5, also from Huy Nguyen.
20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
from Eran Ben ELisha.
21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
from Michael Chan.
22) Missing MSIX vector free in bnxt_en, also from Michael Chan.
23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
Colitti.
24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.
25) bpf_setsockopts() erroneously always returns -EINVAL even on
success. Fix from Yuchung Cheng.
26) tipc_rcv() needs to linearize the SKB before parsing the inner
headers, from Parthasarathy Bhuvaragan.
27) Fix deadlock between link status updates and link removal in netvsc
driver, from Stephen Hemminger.
28) Missed locking of page fragment handling in ESP output, from Steffen
Klassert.
29) Fix refcnt leak in ebpf congestion control code, from Sabrina
Dubroca.
30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
from Christophe Jaillet.
31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
early demux, from Paolo Abeni.
32) Several info leaks in xfrm_user layer, from Mathias Krause.
33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.
34) Properly propagate obsolete state of route upwards in ipv6 so that
upper holders like xfrm can see it. From Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
udp: fix secpath leak
bridge: switchdev: Clear forward mark when transmitting packet
mlxsw: spectrum: Forbid linking to devices that have uppers
wl1251: add a missing spin_lock_init()
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
kcm: do not attach PF_KCM sockets to avoid deadlock
sch_tbf: fix two null pointer dereferences on init failure
sch_sfq: fix null pointer dereference on init failure
sch_netem: avoid null pointer deref on init failure
sch_fq_codel: avoid double free on init failure
sch_cbq: fix null pointer dereferences on init failure
sch_hfsc: fix null pointer deref and double free on init failure
sch_hhf: fix null pointer dereference on init failure
sch_multiq: fix double free on init failure
sch_htb: fix crash on init failure
net/mlx5e: Fix CQ moderation mode not set properly
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
...
Linus Torvalds [Fri, 1 Sep 2017 19:46:30 +0000 (12:46 -0700)]
Merge tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"ceph fscache page locking fix from Zheng, marked for stable"
* tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-client:
ceph: fix readpage from fscache
Linus Torvalds [Fri, 1 Sep 2017 17:43:37 +0000 (10:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a couple drivers fixes (Synaptics PS/2, Xpad)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix PowerA init quirk for some gamepad models
Input: synaptics - fix device info appearing different on reconnect
Linus Torvalds [Fri, 1 Sep 2017 17:41:02 +0000 (10:41 -0700)]
Merge tag 'mmc-v4.13-rc7' of git://git./linux/kernel/git/ulfh/mmc
Pull two more MMC fixes from Ulf Hansson:
"MMC core:
- Fix block status codes
MMC host:
- sdhci-xenon: Fix SD bus voltage select"
* tag 'mmc-v4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-xenon: add set_power callback
mmc: block: Fix block status codes
Linus Torvalds [Fri, 1 Sep 2017 17:38:00 +0000 (10:38 -0700)]
Merge tag 'sound-4.13-rc8' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Three regression fixes that should be addressed before the final
release: a missing mutex call in OSS PCM emulation ioctl, ASoC rt5670
headset detection breakage, and a regression in simple-card parser
code"
* tag 'sound-4.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: simple_card_utils: fix fallback when "label" property isn't present
ALSA: pcm: Fix power lock unbalance via OSS emulation
ASoC: rt5670: Fix GPIO headset detection regression
Linus Torvalds [Fri, 1 Sep 2017 17:36:22 +0000 (10:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three more bug fixes for v4.13.
The two memory management related fixes are quite new, they fix kernel
crashes that can be triggered by user space.
The third commit fixes a bug in the vfio ccw translation code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: fix BUG_ON in crst_table_upgrade
s390/mm: fork vs. 5 level page tabel
vfio: ccw: fix bad ptr math for TIC cda translation
Linus Torvalds [Fri, 1 Sep 2017 17:30:03 +0000 (10:30 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Regression in chacha20 handling of chunked input
- Crash in algif_skcipher when used with async io
- Potential bogus pointer dereference in lib/mpi"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_skcipher - only call put_page on referenced and used pages
crypto: testmgr - add chunked test cases for chacha20
crypto: chacha20 - fix handling of chunked input
lib/mpi: kunmap after finishing accessing buffer
Yossi Kuperman [Fri, 1 Sep 2017 12:42:30 +0000 (14:42 +0200)]
udp: fix secpath leak
After commit
dce4551cb2ad ("udp: preserve head state for IP_CMSG_PASSSEC")
we preserve the secpath for the whole skb lifecycle, but we also
end up leaking a reference to it.
We must clear the head state on skb reception, if secpath is
present.
Fixes: dce4551cb2ad ("udp: preserve head state for IP_CMSG_PASSSEC")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 1 Sep 2017 09:22:25 +0000 (12:22 +0300)]
bridge: switchdev: Clear forward mark when transmitting packet
Commit
6bc506b4fb06 ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.
In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.
However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.
This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.
Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Yotam Gigi <yotamg@mellanox.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 1 Sep 2017 08:52:31 +0000 (10:52 +0200)]
mlxsw: spectrum: Forbid linking to devices that have uppers
The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.
Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.
One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.
Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.
Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Nogah Frankel <nogahf@mellanox.com>
Tested-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Eckert [Fri, 1 Sep 2017 06:58:17 +0000 (08:58 +0200)]
hwmon: (ltq-cputemp) add cpu temp sensor driver
Add the lantiq cpu temperature sensor support for xrx200.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Florian Eckert [Fri, 1 Sep 2017 06:58:18 +0000 (08:58 +0200)]
hwmon: (ltq-cputemp) add devicetree bindings documentation
Document the devicetree bindings for the ltq-cputemp
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Steve French [Fri, 1 Sep 2017 02:34:24 +0000 (21:34 -0500)]
Fix warning messages when mounting to older servers
When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Linus Torvalds [Fri, 1 Sep 2017 01:45:04 +0000 (18:45 -0700)]
Merge tag 'cifs-fixes-for-4.13-rc7-and-stable' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two cifs bug fixes for stable"
* tag 'cifs-fixes-for-4.13-rc7-and-stable' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: remove endian related sparse warning
CIFS: Fix maximum SMB2 header size
Linus Torvalds [Fri, 1 Sep 2017 01:42:21 +0000 (18:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Unfortunately a few issues that warrant sending another pull request,
even if I had hoped to avoid it. This contains:
- A fix for multiqueue xen-blkback, on tear down / disconnect.
- A few fixups for NVMe, including a wrong bit definition, fix for
host memory buffers, and an nvme rdma page size fix"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: fix the definition of the doorbell buffer config support bit
nvme-pci: use dma memory for the host memory buffer descriptors
nvme-rdma: default MR page size to 4k
xen-blkback: stop blkback thread of every queue in xen_blkif_disconnect
Linus Torvalds [Fri, 1 Sep 2017 01:39:19 +0000 (18:39 -0700)]
Merge tag 'for-4.13/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- A couple fixes for bugs introduced as part of the blk_status_t block
layer changes during the 4.13 merge window
- A printk throttling fix to use discrete rate limiting state for each
DM log level
- A stable@ fix for DM multipath that delays request requeueing to
avoid CPU lockup if/when the request queue is "dying"
* tag 'for-4.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mpath: do not lock up a CPU with requeuing activity
dm: fix printk() rate limiting code
dm mpath: retry BLK_STS_RESOURCE errors
dm: fix the second dec_pending() argument in __split_and_process_bio()
Linus Torvalds [Fri, 1 Sep 2017 00:56:56 +0000 (17:56 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/dtc: fix '%zx' warning
include/linux/compiler.h: don't perform compiletime_assert with -O0
mm, madvise: ensure poisoned pages are removed from per-cpu lists
mm, uprobes: fix multiple free of ->uprobes_state.xol_area
kernel/kthread.c: kthread_worker: don't hog the cpu
mm,page_alloc: don't call __node_reclaim() with oom_lock held.
Linus Torvalds [Fri, 1 Sep 2017 00:30:01 +0000 (17:30 -0700)]
Merge branch 'mmu_notifier_fixes'
Merge mmu_notifier fixes from Jérôme Glisse:
"The invalidate_page callback suffered from 2 pitfalls. First it used
to happen after page table lock was release and thus a new page might
have been setup for the virtual address before the call to
invalidate_page().
This is in a weird way fixed by commit
c7ab0d2fdc84 ("mm: convert
try_to_unmap_one() to use page_vma_mapped_walk()") which moved the
callback under the page table lock. Which also broke several existing
user of the mmu_notifier API that assumed they could sleep inside this
callback.
The second pitfall was invalidate_page being the only callback not
taking a range of address in respect to invalidation but was giving an
address and a page. Lot of the callback implementer assumed this could
never be THP and thus failed to invalidate the appropriate range for
THP pages.
By killing this callback we unify the mmu_notifier callback API to
always take a virtual address range as input.
There is now two clear API (I am not mentioning the youngess API which
is seldomly used):
- invalidate_range_start()/end() callback (which allow you to sleep)
- invalidate_range() where you can not sleep but happen right after
page table update under page table lock
Note that a lot of existing user feels broken in respect to
range_start/ range_end. Many user only have range_start() callback but
there is nothing preventing them to undo what was invalidated in their
range_start() callback after it returns but before any CPU page table
update take place.
The code pattern use in kvm or umem odp is an example on how to
properly avoid such race. In a nutshell use some kind of sequence
number and active range invalidation counter to block anything that
might undo what the range_start() callback did.
If you do not care about keeping fully in sync with CPU page table (ie
you can live with CPU page table pointing to new different page for a
given virtual address) then you can take a reference on the pages
inside the range_start callback and drop it in range_end or when your
driver is done with those pages.
Last alternative is to use invalidate_range() if you can do
invalidation without sleeping as invalidate_range() callback happens
under the CPU page table spinlock right after the page table is
updated.
The first two patches convert existing mmu_notifier_invalidate_page()
calls to mmu_notifier_invalidate_range() and bracket those call with
call to mmu_notifier_invalidate_range_start()/end().
The next ten patches remove existing invalidate_page() callback as it
can no longer happen.
Finally the last page remove the invalidate_page() callback completely
so it can RIP.
Changes since v1:
- remove more dead code in kvm (no testing impact)
- more accurate end address computation (patch 2) in page_mkclean_one
and try_to_unmap_one
- added tested-by/reviewed-by gotten so far"
* emailed patches from Jérôme Glisse <jglisse@redhat.com>:
mm/mmu_notifier: kill invalidate_page
KVM: update to new mmu_notifier semantic v2
xen/gntdev: update to new mmu_notifier semantic
sgi-gru: update to new mmu_notifier semantic
misc/mic/scif: update to new mmu_notifier semantic
iommu/intel: update to new mmu_notifier semantic
iommu/amd: update to new mmu_notifier semantic
IB/hfi1: update to new mmu_notifier semantic
IB/umem: update to new mmu_notifier semantic
drm/amdgpu: update to new mmu_notifier semantic
powerpc/powernv: update to new mmu_notifier semantic
mm/rmap: update to new mmu_notifier semantic v2
dax: update to new mmu_notifier semantic
Dave Kleikamp [Thu, 31 Aug 2017 21:46:59 +0000 (16:46 -0500)]
jfs should use MAX_LFS_FILESIZE when calculating s_maxbytes
jfs had previously avoided the use of MAX_LFS_FILESIZE because it hadn't
accounted for the whole 32-bit index range on 32-bit systems. That has
been fixed by commit
0cc3b0ec23ce ("Clarify (and fix) MAX_LFS_FILESIZE
macros"), so we can simplify the code now.
Suggested by Andreas Dilger.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Thu, 31 Aug 2017 23:15:36 +0000 (16:15 -0700)]
scripts/dtc: fix '%zx' warning
dtc uses an incorrect format specifier for printing a uint64_t value.
uint64_t may be either 'unsigned long' or 'unsigned long long' depending
on the host architecture.
Fix this by using %llx and casting to unsigned long long, which ensures
that we always have a wide enough variable to print 64 bits of hex.
HOSTCC scripts/dtc/checks.o
scripts/dtc/checks.c: In function 'check_simple_bus_reg':
scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]
snprintf(unit_addr, sizeof(unit_addr), "%zx", reg);
^
scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]
Link: http://lkml.kernel.org/r/20170829222034.GJ20805@n2100.armlinux.org.uk
Fixes: 828d4cdd012c ("dtc: check.c fix compile error")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Stringer [Thu, 31 Aug 2017 23:15:33 +0000 (16:15 -0700)]
include/linux/compiler.h: don't perform compiletime_assert with -O0
Commit
c7acec713d14 ("kernel.h: handle pointers to arrays better in
container_of()") made use of __compiletime_assert() from container_of()
thus increasing the usage of this macro, allowing developers to notice
type conflicts in usage of container_of() at compile time.
However, the implementation of __compiletime_assert relies on compiler
optimizations to report an error. This means that if a developer uses
"-O0" with any code that performs container_of(), the compiler will always
report an error regardless of whether there is an actual problem in the
code.
This patch disables compile_time_assert when optimizations are disabled to
allow such code to compile with CFLAGS="-O0".
Example compilation failure:
./include/linux/compiler.h:547:38: error: call to `__compiletime_assert_94' declared with attribute error: pointer type mismatch in container_of()
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^
./include/linux/compiler.h:530:4: note: in definition of macro `__compiletime_assert'
prefix ## suffix(); \
^~~~~~
./include/linux/compiler.h:547:2: note: in expansion of macro `_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:46:37: note: in expansion of macro `compiletime_assert'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:860:2: note: in expansion of macro `BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
^~~~~~~~~~~~~~~~
[akpm@linux-foundation.org: use do{}while(0), per Michal]
Link: http://lkml.kernel.org/r/20170829230114.11662-1-joe@ovn.org
Fixes: c7acec713d14c6c ("kernel.h: handle pointers to arrays better in container_of()")
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 31 Aug 2017 23:15:30 +0000 (16:15 -0700)]
mm, madvise: ensure poisoned pages are removed from per-cpu lists
Wendy Wang reported off-list that a RAS HWPOISON-SOFT test case failed
and bisected it to the commit
479f854a207c ("mm, page_alloc: defer
debugging checks of pages allocated from the PCP").
The problem is that a page that was poisoned with madvise() is reused.
The commit removed a check that would trigger if DEBUG_VM was enabled
but re-enabling the check only fixes the problem as a side-effect by
printing a bad_page warning and recovering.
The root of the problem is that an madvise() can leave a poisoned page
on the per-cpu list. This patch drains all per-cpu lists after pages
are poisoned so that they will not be reused. Wendy reports that the
test case in question passes with this patch applied. While this could
be done in a targeted fashion, it is over-complicated for such a rare
operation.
Link: http://lkml.kernel.org/r/20170828133414.7qro57jbepdcyz5x@techsingularity.net
Fixes: 479f854a207c ("mm, page_alloc: defer debugging checks of pages allocated from the PCP")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Wang, Wendy <wendy.wang@intel.com>
Tested-by: Wang, Wendy <wendy.wang@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Hansen, Dave" <dave.hansen@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Thu, 31 Aug 2017 23:15:26 +0000 (16:15 -0700)]
mm, uprobes: fix multiple free of ->uprobes_state.xol_area
Commit
7c051267931a ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().
However, it was overlooked that this introduced an new error path before
the new mm_struct's ->uprobes_state.xol_area has been set to NULL after
being copied from the old mm_struct by the memcpy in dup_mm(). For a
task that has previously hit a uprobe tracepoint, this resulted in the
'struct xol_area' being freed multiple times if the task was killed at
just the right time while forking.
Fix it by setting ->uprobes_state.xol_area to NULL in mm_init() rather
than in uprobe_dup_mmap().
With CONFIG_UPROBE_EVENTS=y, the bug can be reproduced by the same C
program given by commit
2b7e8665b4ff ("fork: fix incorrect fput of
->exe_file causing use-after-free"), provided that a uprobe tracepoint
has been set on the fork_thread() function. For example:
$ gcc reproducer.c -o reproducer -lpthread
$ nm reproducer | grep fork_thread
0000000000400719 t fork_thread
$ echo "p $PWD/reproducer:0x719" > /sys/kernel/debug/tracing/uprobe_events
$ echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable
$ ./reproducer
Here is the use-after-free reported by KASAN:
BUG: KASAN: use-after-free in uprobe_clear_state+0x1c4/0x200
Read of size 8 at addr
ffff8800320a8b88 by task reproducer/198
CPU: 1 PID: 198 Comm: reproducer Not tainted
4.13.0-rc7-00015-g36fde05f3fb5 #255
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
Call Trace:
dump_stack+0xdb/0x185
print_address_description+0x7e/0x290
kasan_report+0x23b/0x350
__asan_report_load8_noabort+0x19/0x20
uprobe_clear_state+0x1c4/0x200
mmput+0xd6/0x360
do_exit+0x740/0x1670
do_group_exit+0x13f/0x380
get_signal+0x597/0x17d0
do_signal+0x99/0x1df0
exit_to_usermode_loop+0x166/0x1e0
syscall_return_slowpath+0x258/0x2c0
entry_SYSCALL_64_fastpath+0xbc/0xbe
...
Allocated by task 199:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xfc/0x180
kmem_cache_alloc_trace+0xf3/0x330
__create_xol_area+0x10f/0x780
uprobe_notify_resume+0x1674/0x2210
exit_to_usermode_loop+0x150/0x1e0
prepare_exit_to_usermode+0x14b/0x180
retint_user+0x8/0x20
Freed by task 199:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xa8/0x1a0
kfree+0xba/0x210
uprobe_clear_state+0x151/0x200
mmput+0xd6/0x360
copy_process.part.8+0x605f/0x65d0
_do_fork+0x1a5/0xbd0
SyS_clone+0x19/0x20
do_syscall_64+0x22f/0x660
return_from_SYSCALL_64+0x0/0x7a
Note: without KASAN, you may instead see a "Bad page state" message, or
simply a general protection fault.
Link: http://lkml.kernel.org/r/20170830033303.17927-1-ebiggers3@gmail.com
Fixes: 7c051267931a ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shaohua Li [Thu, 31 Aug 2017 23:15:23 +0000 (16:15 -0700)]
kernel/kthread.c: kthread_worker: don't hog the cpu
If the worker thread continues getting work, it will hog the cpu and rcu
stall complains. Make it a good citizen. This is triggered in a loop
block device test.
Link: http://lkml.kernel.org/r/5de0a179b3184e1a2183fc503448b0269f24d75b.1503697127.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Thu, 31 Aug 2017 23:15:20 +0000 (16:15 -0700)]
mm,page_alloc: don't call __node_reclaim() with oom_lock held.
We are doing a last second memory allocation attempt before calling
out_of_memory(). But since slab shrinker functions might indirectly
wait for other thread's __GFP_DIRECT_RECLAIM && !__GFP_NORETRY memory
allocations via sleeping locks, calling slab shrinker functions from
node_reclaim() from get_page_from_freelist() with oom_lock held has
possibility of deadlock. Therefore, make sure that last second memory
allocation attempt does not call slab shrinker functions.
Link: http://lkml.kernel.org/r/1503577106-9196-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:38 +0000 (17:17 -0400)]
mm/mmu_notifier: kill invalidate_page
The invalidate_page callback suffered from two pitfalls. First it used
to happen after the page table lock was release and thus a new page
might have setup before the call to invalidate_page() happened.
This is in a weird way fixed by commit
c7ab0d2fdc84 ("mm: convert
try_to_unmap_one() to use page_vma_mapped_walk()") that moved the
callback under the page table lock but this also broke several existing
users of the mmu_notifier API that assumed they could sleep inside this
callback.
The second pitfall was invalidate_page() being the only callback not
taking a range of address in respect to invalidation but was giving an
address and a page. Lots of the callback implementers assumed this
could never be THP and thus failed to invalidate the appropriate range
for THP.
By killing this callback we unify the mmu_notifier callback API to
always take a virtual address range as input.
Finally this also simplifies the end user life as there is now two clear
choices:
- invalidate_range_start()/end() callback (which allow you to sleep)
- invalidate_range() where you can not sleep but happen right after
page table update under page table lock
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: axie <axie@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:37 +0000 (17:17 -0400)]
KVM: update to new mmu_notifier semantic v2
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Changed since v1 (Linus Torvalds)
- remove now useless kvm_arch_mmu_notifier_invalidate_page()
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:36 +0000 (17:17 -0400)]
xen/gntdev: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: xen-devel@lists.xenproject.org (moderated for non-subscribers)
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:35 +0000 (17:17 -0400)]
sgi-gru: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:34 +0000 (17:17 -0400)]
misc/mic/scif: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:33 +0000 (17:17 -0400)]
iommu/intel: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:32 +0000 (17:17 -0400)]
iommu/amd: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:31 +0000 (17:17 -0400)]
IB/hfi1: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: linux-rdma@vger.kernel.org
Cc: Dean Luick <dean.luick@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:30 +0000 (17:17 -0400)]
IB/umem: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Cc: linux-rdma@vger.kernel.org
Cc: Artemy Kovalyov <artemyko@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:29 +0000 (17:17 -0400)]
drm/amdgpu: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:28 +0000 (17:17 -0400)]
powerpc/powernv: update to new mmu_notifier semantic
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and now are bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:27 +0000 (17:17 -0400)]
mm/rmap: update to new mmu_notifier semantic v2
Replace all mmu_notifier_invalidate_page() calls by *_invalidate_range()
and make sure it is bracketed by calls to *_invalidate_range_start()/end().
Note that because we can not presume the pmd value or pte value we have
to assume the worst and unconditionaly report an invalidation as
happening.
Changed since v2:
- try_to_unmap_one() only one call to mmu_notifier_invalidate_range()
- compute end with PAGE_SIZE << compound_order(page)
- fix PageHuge() case in try_to_unmap_one()
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: axie <axie@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Thu, 31 Aug 2017 21:17:26 +0000 (17:17 -0400)]
dax: update to new mmu_notifier semantic
Replace all mmu_notifier_invalidate_page() calls by *_invalidate_range()
and make sure it is bracketed by calls to *_invalidate_range_start()/end().
Note that because we can not presume the pmd value or pte value we have
to assume the worst and unconditionaly report an invalidation as
happening.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: axie <axie@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan, Zheng [Fri, 4 Aug 2017 03:22:31 +0000 (11:22 +0800)]
ceph: fix readpage from fscache
ceph_readpage() unlocks page prematurely prematurely in the case
that page is reading from fscache. Caller of readpage expects that
page is uptodate when it get unlocked. So page shoule get locked
by completion callback of fscache_read_or_alloc_pages()
Cc: stable@vger.kernel.org # 4.1+, needs backporting for < 4.7
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Randy Dunlap [Sun, 30 Jul 2017 17:25:37 +0000 (10:25 -0700)]
binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp()
Change the m32r flat_put_addr_at_rp() function to return int and
always return 0.
The microblaze function already returned 0 so just change its
function return type from void to int.
Seven (7) other arch-es already have this function as returning
an int type result.
Fixes: 468138d78510 (binfmt_flat: flat_{get,put}_addr_from_rp()
should be able to fail)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Bart Van Assche [Wed, 23 Aug 2017 22:29:11 +0000 (15:29 -0700)]
compat_hdio_ioctl: Fix a declaration
This patch avoids that sparse reports the following warning messages:
block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces)
block/compat_ioctl.c:85:11: expected unsigned long *[noderef] <asn:1>p
block/compat_ioctl.c:85:11: got void [noderef] <asn:1>*
block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces)
block/compat_ioctl.c:91:21: expected void const volatile [noderef] <asn:1>*<noident>
block/compat_ioctl.c:91:21: got unsigned long *[noderef] <asn:1>p
block/compat_ioctl.c:87:53: warning: dereference of noderef expression
block/compat_ioctl.c:91:21: warning: dereference of noderef expression
Fixes: commit d597580d3737 ("generic ...copy_..._user primitives")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Bart Van Assche [Wed, 23 Aug 2017 22:29:10 +0000 (15:29 -0700)]
<linux/uaccess.h>: Fix copy_in_user() declaration
copy_in_user() copies data from user-space address @from to user-
space address @to. Hence declare both @from and @to as user-space
pointers.
Fixes: commit d597580d3737 ("generic ...copy_..._user primitives")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Thu, 6 Jul 2017 16:58:37 +0000 (18:58 +0200)]
annotate RWF_... flags
[AV: added missing annotations in syscalls.h/compat.h]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 8 Jul 2017 15:40:39 +0000 (11:40 -0400)]
teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cong Wang [Thu, 31 Aug 2017 14:47:43 +0000 (16:47 +0200)]
wl1251: add a missing spin_lock_init()
wl1251: add a missing spin_lock_init()
This fixes the following kernel warning:
[ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745
[ 5668.771850] lock: 0xce63ef20, .magic:
00000000, .owner: <none>/-1,
.owner_cpu: 0
[ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W
4.12.0-03002-gec979a4-dirty #40
[ 5668.772796] Hardware name: Nokia RX-51 board
[ 5668.773071] Workqueue: phy1 wl1251_irq_work
[ 5668.773345] [<
c010c9e4>] (unwind_backtrace) from [<
c010a274>]
(show_stack+0x10/0x14)
[ 5668.773803] [<
c010a274>] (show_stack) from [<
c01545a4>]
(do_raw_spin_lock+0x6c/0xa0)
[ 5668.774230] [<
c01545a4>] (do_raw_spin_lock) from [<
c06ca578>]
(_raw_spin_lock_irqsave+0x10/0x18)
[ 5668.774658] [<
c06ca578>] (_raw_spin_lock_irqsave) from [<
c048c010>]
(wl1251_op_tx+0x38/0x5c)
[ 5668.775115] [<
c048c010>] (wl1251_op_tx) from [<
c06a12e8>]
(ieee80211_tx_frags+0x188/0x1c0)
[ 5668.775543] [<
c06a12e8>] (ieee80211_tx_frags) from [<
c06a138c>]
(__ieee80211_tx+0x6c/0x130)
[ 5668.775970] [<
c06a138c>] (__ieee80211_tx) from [<
c06a3dbc>]
(ieee80211_tx+0xdc/0x104)
[ 5668.776367] [<
c06a3dbc>] (ieee80211_tx) from [<
c06a4af0>]
(__ieee80211_subif_start_xmit+0x454/0x8c8)
[ 5668.776824] [<
c06a4af0>] (__ieee80211_subif_start_xmit) from
[<
c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc)
[ 5668.777343] [<
c06a4f94>] (ieee80211_subif_start_xmit) from
[<
c0578848>] (dev_hard_start_xmit+0x80/0x118)
...
by adding the missing spin_lock_init().
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Jani Nikula [Thu, 31 Aug 2017 19:21:29 +0000 (22:21 +0300)]
Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
On python3, Popen() universal_newlines=True converts the subprocess
stdout to unicode text using a codec based on user preferences. Given
LANG indicating ascii and utf-8 stdout from the subprocess, you'd get:
WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno
../drivers/media/dvb-core/demux.h' processing failed with: 'ascii' codec can't
decode byte 0xe2 in position 6368: ordinal not in range(128)
Fix this by dropping universal_newlines=True and replacing the implicit
LANG specific decode with an explicit utf-8 decode. This also gets rid
of the annoying conditional code for python 2 vs. 3.
Fixes: ba3501859354 ("Documentation/sphinx: fix kernel-doc extension on python3")
Reference: http://mid.mail-archive.com/
54c23e8e-89c0-5cea-0dcc-
e938952c5642@infradead.org
Reported-and-tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cameron Gutman [Thu, 31 Aug 2017 18:52:20 +0000 (11:52 -0700)]
Input: xpad - fix PowerA init quirk for some gamepad models
The PowerA gamepad initialization quirk worked with the PowerA
wired gamepad I had around (0x24c6:0x543a), but a user reported [0]
that it didn't work for him, even though our gamepads shared the
same vendor and product IDs.
When I initially implemented the PowerA quirk, I wanted to avoid
actually triggering the rumble action during init. My tests showed
that my gamepad would work correctly even if it received a rumble
of 0 intensity, so that's what I went with.
Unfortunately, this apparently isn't true for all models (perhaps
a firmware difference?). This non-working gamepad seems to require
the real magic rumble packet that the Microsoft driver sends, which
actually vibrates the gamepad. To counteract this effect, I still
send the old zero-rumble PowerA quirk packet which cancels the
rumble effect before the motors can spin up enough to vibrate.
[0]: https://github.com/paroj/xpad/issues/48#issuecomment-
313904867
Reported-by: Kyle Beauchamp <kyleabeauchamp@gmail.com>
Tested-by: Kyle Beauchamp <kyleabeauchamp@gmail.com>
Fixes: 81093c9848a7 ("Input: xpad - support some quirky Xbox One pads")
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Tue, 29 Aug 2017 12:08:35 +0000 (14:08 +0200)]
i2c: designware: Round down ACPI provided clk to nearest supported clk
The Lenovo Miix2 8 DSDT contains an i2c clk / bus speed of
1700000 Hz
for one if its devices, which is not supported.
This is the second DSDT to show up with an unsupported clk in a short
time, remove the hardcoded fix for DSDTs with a 1 MiHz clock and simply
always round down the clk to the nearest supported value.
Reported-by: russianneuromancer@ya.ru
Fixes: 682c6c2188 ("i2c: designware: Some broken DSTDs use 1MiHz ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jonathan Corbet [Thu, 31 Aug 2017 15:47:22 +0000 (09:47 -0600)]
genalloc: Fix an incorrect kerneldoc comment
The kerneldoc comment for the genpool_algo_t typedef was incomplete and
incorrectly formatted, leading to a raft of warnings during the docs build.
Fix it appropriately.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Matan Barak [Thu, 3 Aug 2017 13:07:07 +0000 (16:07 +0300)]
IB/core: Expose ioctl interface through experimental Kconfig
Add CONFIG_INFINIBAND_EXP_USER_ACCESS that enables the ioctl
interface. This interface is experimental and is subject to change.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:06 +0000 (16:07 +0300)]
IB/core: Assign root to all drivers
In order to use the parsing tree, we need to assign the root
to all drivers. Currently, we just assign the default parsing
tree via ib_uverbs_add_one. The driver could override this by
assigning a parsing tree prior to registering the device.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:05 +0000 (16:07 +0300)]
IB/core: Add completion queue (cq) object actions
Adding CQ ioctl actions:
1. create_cq
2. destroy_cq
This requires adding the following:
1. A specification describing the method
a. Handler
b. Attributes specification
Each attribute is one of the following:
a. PTR_IN - input data
Note: This could be encoded inlined for
data < 64bit
b. PTR_OUT - response data
c. IDR - idr based object
d. FD - fd based object
Blobs attributes (clauses a and b) contain their type,
while objects specifications (clauses c and d)
contains the expected object type (for example, the
given id should be UVERBS_TYPE_PD) and the required
access (READ, WRITE, NEW or DESTROY). If a NEW is
required, the new object's id will be assigned to this
attribute. All attributes could get UA_FLAGS
attribute. Currently we support stating that an
attribute is mandatory or that the specification size
corresponds to a lower bound (and that this attribute
could be extended).
We currently add both default attributes and the two
generic UHW_IN and UHW_OUT driver specific attributes.
2. Handler
A handler gets a uverbs_attr_bundle. The handler developer uses
uverbs_attr_get to fetch an attribute of a given id.
Each of these attribute groups correspond to the specification
group defined in the action (clauses 1.b and 1.c respectively).
The indices of these arrays corresponds to the attribute ids
declared in the specifications (clause 2).
The handler is quite simple. It assumes the infrastructure fetched
all objects and locked, created or destroyed them as required by
the specification. Pointer (or blob) attributes were validated to
match their required sizes. After the handler finished, the
infrastructure commits or rollbacks the objects.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:04 +0000 (16:07 +0300)]
IB/core: Add legacy driver's user-data
In this phase, we don't want to change all the drivers to use
flexible driver's specific attributes. Therefore, we add two default
attributes: UHW_IN and UHW_OUT. These attributes are optional in some
methods and they encode the driver specific command data. We add
a function that extract this data and creates the legacy udata over
it.
Driver's data should start from UVERBS_UDATA_DRIVER_DATA_FLAG. This
turns on the first bit of the namespace, indicating this attribute
belongs to the driver's namespace.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:03 +0000 (16:07 +0300)]
IB/core: Export ioctl enum types to user-space
Add a new ib_user_ioctl_verbs.h which exports all required ABI
enums and structs to the user-space.
Export the default types to user-space through this file.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:02 +0000 (16:07 +0300)]
IB/core: Explicitly destroy an object while keeping uobject
When some objects are destroyed, we need to extract their status at
destruction. After object's destruction, this status
(e.g. events_reported) relies in the uobject. In order to have the
latest and correct status, the underlying object should be destroyed,
but we should keep the uobject alive and read this information off the
uobject. We introduce a rdma_explicit_destroy function. This function
destroys the class type object (for example, the IDR class type which
destroys the underlying object as well) and then convert the uobject
to be of a null class type. This uobject will then be destroyed as any
other uobject once uverbs_finalize_object[s] is called.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:01 +0000 (16:07 +0300)]
IB/core: Add macros for declaring methods and attributes
This patch adds macros for declaring objects, methods and
attributes. These definitions are later used by downstream patches
to declare some of the default types.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:07:00 +0000 (16:07 +0300)]
IB/core: Add uverbs merge trees functionality
Different drivers support different features and even subset of the
common uverbs implementation. Currently, this is handled as bitmask
in every driver that represents which kind of methods it supports, but
doesn't go down to attributes granularity. Moreover, drivers might
want to add their specific types, methods and attributes to let
their user-space counter-parts be exposed to some more efficient
abstractions. It means that existence of different features is
validated syntactically via the parsing infrastructure rather than
using a complex in-handler logic.
In order to do that, we allow defining features and abstractions
as parsing trees. These per-feature parsing tree could be merged
to an efficient (perfect-hash based) parsing tree, which is later
used by the parsing infrastructure.
To sum it up, this makes a parse tree unique for a device and
represents only the features this particular device supports.
This is done by having a root specification tree per feature.
Before a device registers itself as an IB device, it merges
all these trees into one parsing tree. This parsing tree
is used to parse all user-space commands.
A future user-space application could read this parse tree. This
tree represents which objects, methods and attributes are
supported by this device.
This is based on the idea of
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:06:59 +0000 (16:06 +0300)]
IB/core: Add DEVICE object and root tree structure
This adds the DEVICE object. This object supports creating the context
that all objects are created from. Moreover, it supports executing
methods which are related to the device itself, such as QUERY_DEVICE.
This is a singleton object (per file instance).
All standard objects are put in the root structure. This root will later
on be used in drivers as the source for their whole parsing tree.
Later on, when new features are added, these drivers could mix this root
with other customized objects.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:06:58 +0000 (16:06 +0300)]
IB/core: Declare an object instead of declaring only type attributes
Switch all uverbs_type_attrs_xxxx with DECLARE_UVERBS_OBJECT
macros. This will be later used in order to embed the object
specific methods in the objects as well.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Matan Barak [Thu, 3 Aug 2017 13:06:57 +0000 (16:06 +0300)]
IB/core: Add new ioctl interface
In this ioctl interface, processing the command starts from
properties of the command and fetching the appropriate user objects
before calling the handler.
Parsing and validation is done according to a specifier declared by
the driver's code. In the driver, all supported objects are declared.
These objects are separated to different object namepsaces. Dividing
objects to namespaces is done at initialization by using the higher
bits of the object ids. This initialization can mix objects declared
in different places to one parsing tree using in this ioctl interface.
For each object we list all supported methods. Similarly to objects,
methods are separated to method namespaces too. Namespacing is done
similarly to the objects case. This could be used in order to add
methods to an existing object.
Each method has a specific handler, which could be either a default
handler or a driver specific handler.
Along with the handler, a bunch of attributes are specified as well.
Similarly to objects and method, attributes are namespaced and hashed
by their ids at initialization too. All supported attributes are
subject to automatic fetching and validation. These attributes include
the command, response and the method's related objects' ids.
When these entities (objects, methods and attributes) are used, the
high bits of the entities ids are used in order to calculate the hash
bucket index. Then, these high bits are masked out in order to have a
zero based index. Since we use these high bits for both bucketing and
namespacing, we get a compact representation and O(1) array access.
This is mandatory for efficient dispatching.
Each attribute has a type (PTR_IN, PTR_OUT, IDR and FD) and a length.
Attributes could be validated through some attributes, like:
(*) Minimum size / Exact size
(*) Fops for FD
(*) Object type for IDR
If an IDR/fd attribute is specified, the kernel also states the object
type and the required access (NEW, WRITE, READ or DESTROY).
All uobject/fd management is done automatically by the infrastructure,
meaning - the infrastructure will fail concurrent commands that at
least one of them requires concurrent access (WRITE/DESTROY),
synchronize actions with device removals (dissociate context events)
and take care of reference counting (increase/decrease) for concurrent
actions invocation. The reference counts on the actual kernel objects
shall be handled by the handlers.
objects
+--------+
| |
| | methods +--------+
| | ns method method_spec +-----+ |len |
+--------+ +------+[d]+-------+ +----------------+[d]+------------+ |attr1+-> |type |
| object +> |method+-> | spec +-> + attr_buckets +-> |default_chain+--> +-----+ |idr_type|
+--------+ +------+ |handler| | | +------------+ |attr2| |access |
| | | | +-------+ +----------------+ |driver chain| +-----+ +--------+
| | | | +------------+
| | +------+
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+--------+
[d] = Hash ids to groups using the high order bits
The right types table is also chosen by using the high bits from
the ids. Currently we have either default or driver specific groups.
Once validation and object fetching (or creation) completed, we call
the handler:
int (*handler)(struct ib_device *ib_dev, struct ib_uverbs_file *ufile,
struct uverbs_attr_bundle *ctx);
ctx bundles attributes of different namespaces. Each element there
is an array of attributes which corresponds to one namespaces of
attributes. For example, in the usually used case:
ctx core
+----------------------------+ +------------+
| core: +---> | valid |
+----------------------------+ | cmd_attr |
| driver: | +------------+
|----------------------------+--+ | valid |
| | cmd_attr |
| +------------+
| | valid |
| | obj_attr |
| +------------+
|
| drivers
| +------------+
+> | valid |
| cmd_attr |
+------------+
| valid |
| cmd_attr |
+------------+
| valid |
| obj_attr |
+------------+
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adit Ranadive [Tue, 29 Aug 2017 22:51:30 +0000 (15:51 -0700)]
RDMA/vmw_pvrdma: Fix a signedness
Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Aditya Sarwade [Tue, 29 Aug 2017 22:51:29 +0000 (15:51 -0700)]
RDMA/vmw_pvrdma: Report network header type in WC
We should report the network header type in the work completion so that
the kernel can infer the right RoCE type headers.
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Roland Dreier [Tue, 29 Aug 2017 17:34:44 +0000 (10:34 -0700)]
IB/core: Add might_sleep() annotation to ib_init_ah_from_wc()
For RoCE, ib_init_ah_from_wc() can follow the path
ib_init_ah_from_wc() ->
rdma_addr_find_l2_eth_by_grh() ->
rdma_resolve_ip()
and rdma_resolve_ip() will sleep in kzalloc() and wait_for_completion().
However, developers will not see any warnings if they use ib_init_ah_from_wc()
in an atomic context and test only on IB, because the function doesn't
sleep in that case.
Add a might_sleep() so that lockdep will catch bugs no matter what hardware is
used to test.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Roland Dreier [Tue, 29 Aug 2017 17:34:43 +0000 (10:34 -0700)]
IB/cm: Fix sleeping in atomic when RoCE is used
A couple of places in the CM do
spin_lock_irq(&cm_id_priv->lock);
...
if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg))
However when the underlying transport is RoCE, this leads to a sleeping function
being called with the lock held - the callchain is
cm_alloc_response_msg() ->
ib_create_ah_from_wc() ->
ib_init_ah_from_wc() ->
rdma_addr_find_l2_eth_by_grh() ->
rdma_resolve_ip()
and rdma_resolve_ip() starts out by doing
req = kzalloc(sizeof *req, GFP_KERNEL);
not to mention rdma_addr_find_l2_eth_by_grh() doing
wait_for_completion(&ctx.comp);
to wait for the task that rdma_resolve_ip() queues up.
Fix this by moving the AH creation out of the lock.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Takashi Iwai [Thu, 31 Aug 2017 12:08:26 +0000 (14:08 +0200)]
Merge tag 'asoc-fix-v4.13-rc7' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.13
A couple of fixes, one for a regression in simple-card introduced during
the merge window that was only reported this week and another for a
regression in registration of ACPI GPIOs.
Martin Schwidefsky [Thu, 31 Aug 2017 12:05:20 +0000 (14:05 +0200)]
Merge tag 'vfio-ccw-
20170724' of git://git./linux/kernel/git/kvms390/vfio-ccw into fixes
Pull vfio-ccw fix from Cornelia Huck:
"A bugfix in the ccw translation code."
Martin Schwidefsky [Thu, 31 Aug 2017 11:18:22 +0000 (13:18 +0200)]
s390/mm: fix BUG_ON in crst_table_upgrade
A 31-bit compat process can force a BUG_ON in crst_table_upgrade
with specific, invalid mmap calls, e.g.
mmap((void*) 0x7fff8000, 0x10000, 3, 32, -1, 0)
The arch_get_unmapped_area[_topdown] functions miss an if condition
in the decision to do a page table upgrade.
Fixes: 9b11c7912d00 ("s390/mm: simplify arch_get_unmapped_area[_topdown]")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Thu, 31 Aug 2017 10:30:54 +0000 (12:30 +0200)]
s390/mm: fork vs. 5 level page tabel
The mm->context.asce field of a new process is not set up correctly
in case of a fork with a 5 level page table.
Add the missing case to init_new_context().
Fixes: 1aea9b3f9210 ("s390/mm: implement 5 level pages tables")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Mark Brown [Thu, 31 Aug 2017 11:47:58 +0000 (12:47 +0100)]
Merge remote-tracking branch 'asoc/fix/rt5670' into asoc-fixes
Naoya Horiguchi [Mon, 28 Aug 2017 07:30:59 +0000 (16:30 +0900)]
x86/boot/KASLR: Work around firmware bugs by excluding EFI_BOOT_SERVICES_* and EFI_LOADER_* from KASLR's choice
There's a potential bug in how we select the KASLR kernel address n
the early boot code.
The KASLR boot code currently chooses the kernel image's physical memory
location from E820_TYPE_RAM regions by walking over all e820 entries.
E820_TYPE_RAM includes EFI_BOOT_SERVICES_CODE and EFI_BOOT_SERVICES_DATA
as well, so those regions can end up hosting the kernel image. According to
the UEFI spec, all memory regions marked as EfiBootServicesCode and
EfiBootServicesData are available as free memory after the first call
to ExitBootServices(). I.e. so such regions should be usable for the
kernel, per spec.
In real life however, we have workarounds for broken x86 firmware,
where we keep such regions reserved until SetVirtualAddressMap() is done.
See the following code in should_map_region():
static bool should_map_region(efi_memory_desc_t *md)
{
...
/*
* Map boot services regions as a workaround for buggy
* firmware that accesses them even when they shouldn't.
*
* See efi_{reserve,free}_boot_services().
*/
if (md->type =3D=3D EFI_BOOT_SERVICES_CODE ||
md->type =3D=3D EFI_BOOT_SERVICES_DATA)
return false;
This workaround suppressed a boot crash, but potential issues still
remain because no one prevents the regions from overlapping with kernel
image by KASLR.
So let's make sure that EFI_BOOT_SERVICES_{CODE|DATA} regions are never
chosen as kernel memory for the workaround to work fine.
Furthermore, EFI_LOADER_{CODE|DATA} regions are also excluded because
they can be used after ExitBootServices() as defined in EFI spec.
As a result, we choose kernel address only from EFI_CONVENTIONAL_MEMORY
which is the only memory type we know to be safely free.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Junichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: fanc.fnst@cn.fujitsu.com
Cc: izumi.taku@jp.fujitsu.com
Link: http://lkml.kernel.org/r/20170828074444.GC23181@hori1.linux.bs1.fc.nec.co.jp
[ Rewrote/fixed/clarified the changelog and the in code comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Florian Fainelli [Thu, 31 Aug 2017 00:49:29 +0000 (17:49 -0700)]
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
This reverts commit
7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.
David Daney provide the following call trace and diagram of events:
When ndo_stop() is called we call:
phy_disconnect()
+---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
+---> phy_stop_machine()
| +---> phy_state_machine()
| +----> queue_delayed_work(): Work queued.
+--->phy_detach() implies: phydev->attached_dev = NULL;
Now at a later time the queued work does:
phy_state_machine()
+---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:
CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc ==
ffffffff80de37ec, ra ==
ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task:
80000004021ed100 task.stack:
8000000409d70000
$ 0 :
0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4 :
0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8 :
0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12 :
8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16 :
80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20 :
0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24 :
0000000000000061 ffffffff808637b0
$28 :
8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi :
000000000000002a
Lo :
000000000000003f
epc :
ffffffff80de37ec netif_carrier_off+0xc/0x58
ra :
ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status:
14009ce3 KX SX UX KERNEL EXL IE
Cause :
00800008 (ExcCode 02)
BadVA :
0000000000000048
PrId :
000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=
8000000409d70000,
task=
80000004021ed100, tls=
0000000000000000)
Stack :
8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
...
Call Trace:
[<
ffffffff80de37ec>] netif_carrier_off+0xc/0x58
[<
ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8
[<
ffffffff808a1708>] process_one_work+0x158/0x368
[<
ffffffff808a1ac0>] worker_thread+0x150/0x4c0
[<
ffffffff808a8598>] kthread+0xc8/0xe0
[<
ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c
The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.
PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: David Daney <ddaney.cavm@gmail.com>
Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 30 Aug 2017 22:02:14 +0000 (22:02 +0000)]
hwmon: (pmbus) Add support for Texas Instruments tps53679 device
The below lists of VOUT_MODE command readout with their related VID
protocols, Digital to Analog Converter steps, supported by the device:
VR12.0 mode, 5-mV DAC - 0x21
VR12.5 mode, 10-mV DAC - 0x22
VR13.0 mode, 10-mV DAC - 0x24
IMVP8 mode, 5-mV DAC - 0x25
VR13.0 mode, 5-mV DAC - 0x27
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
David S. Miller [Wed, 30 Aug 2017 23:39:01 +0000 (16:39 -0700)]
Merge tag 'mlx5-fixes-2017-08-30' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2017-08-30
This series contains some misc fixes to the mlx5 driver.
Please pull and let me know if there's any problem.
For -stable:
Kernels >= 4.12
net/mlx5e: Fix CQ moderation mode not set properly
net/mlx5e: Don't override user RSS upon set channels
Kernels >= 4.11
net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
Kernels >= 4.10
net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap
net/mlx5e: Check for qos capability in dcbnl_initialize
Kernels >= 4.9
net/mlx5e: Fix dangling page pointer on DMA mapping error
Kernels >= 4.8
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5: Fix arm SRQ command for ISSI version 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 30 Aug 2017 19:39:33 +0000 (12:39 -0700)]
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
fix that.
Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 30 Aug 2017 16:29:31 +0000 (09:29 -0700)]
kcm: do not attach PF_KCM sockets to avoid deadlock
syzkaller had no problem to trigger a deadlock, attaching a KCM socket
to another one (or itself). (original syzkaller report was a very
confusing lockdep splat during a sendmsg())
It seems KCM claims to only support TCP, but no enforcement is done,
so we might need to add additional checks.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Corbet [Thu, 24 Aug 2017 20:27:05 +0000 (14:27 -0600)]
doc: Add documentation for the genalloc subsystem
Genalloc/genpool has kerneldoc comments, but nothing has ever been pulled
into the docs themselves. Here's a first attempt, repurposed from an
article I wrote at https://lwn.net/Articles/729653/.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Alexander Kuleshov [Tue, 22 Aug 2017 18:39:13 +0000 (00:39 +0600)]
assoc_array: fix path to assoc_array documentation
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Wed, 30 Aug 2017 22:28:47 +0000 (15:28 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"A single patch removing some structure definitions from a uapi header
file. These payloads are never processed directly by the kernel they
are simply passed through an ioctl as opaque blobs to the ACPI _DSM
(Device Specific Method) interface.
Userspace should not be depending on the kernel to define these
payloads. We will instead provide these definitions via the existing
libndctl (https://github.com/pmem/ndctl) project that has NVDIMM
command helpers and other definitions"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: clean up command definitions
git.samba.org / sfrench / cifs-2.6.git / log