ARM: dts: sunxi: Add dtsi for AXP209 PMIC
authorChen-Yu Tsai <wens@csie.org>
Mon, 12 Jan 2015 04:34:02 +0000 (12:34 +0800)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Wed, 21 Jan 2015 08:59:09 +0000 (09:59 +0100)
The AXP209 PMIC is used with some Allwinner SoCs. This patch adds
a dtsi file listing all the regulator nodes. The regulators are
initialized based on their device node names.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/arm/boot/dts/axp209.dtsi [new file with mode: 0644]

diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
new file mode 100644 (file)
index 0000000..c20cf53
--- /dev/null
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+       compatible = "x-powers,axp209";
+       interrupt-controller;
+       #interrupt-cells = <1>;
+
+       regulators {
+               /* Default work frequency for buck regulators */
+               x-powers,dcdc-freq = <1500>;
+
+               reg_dcdc2: dcdc2 {
+                       regulator-name = "dcdc2";
+               };
+
+               reg_dcdc3: dcdc3 {
+                       regulator-name = "dcdc3";
+               };
+
+               reg_ldo1: ldo1 {
+                       /* LDO1 is a fixed output regulator */
+                       regulator-always-on;
+                       regulator-min-microvolt = <1300000>;
+                       regulator-max-microvolt = <1300000>;
+                       regulator-name = "ldo1";
+               };
+
+               reg_ldo2: ldo2 {
+                       regulator-name = "ldo2";
+               };
+
+               reg_ldo3: ldo3 {
+                       regulator-name = "ldo3";
+               };
+
+               reg_ldo4: ldo4 {
+                       regulator-name = "ldo4";
+               };
+
+               reg_ldo5: ldo5 {
+                       regulator-name = "ldo5";
+               };
+       };
+};