ARM: dts: mvebu: Convert all the mvebu files to use the range property
authorGregory CLEMENT <gregory.clement@free-electrons.com>
Fri, 12 Apr 2013 14:29:08 +0000 (16:29 +0200)
committerJason Cooper <jason@lakedaemon.net>
Mon, 15 Apr 2013 15:00:21 +0000 (15:00 +0000)
This conversion will allow to keep 32 bits addresses for the internal
registers whereas the memory of the system will be 64 bits.
Later it will also ease the move of the mvebu-mbus driver to the
device tree support.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
12 files changed:
arch/arm/boot/dts/armada-370-db.dts
arch/arm/boot/dts/armada-370-mirabox.dts
arch/arm/boot/dts/armada-370-rd.dts
arch/arm/boot/dts/armada-370-xp.dtsi
arch/arm/boot/dts/armada-370.dtsi
arch/arm/boot/dts/armada-xp-db.dts
arch/arm/boot/dts/armada-xp-gp.dts
arch/arm/boot/dts/armada-xp-mv78230.dtsi
arch/arm/boot/dts/armada-xp-mv78260.dtsi
arch/arm/boot/dts/armada-xp-mv78460.dtsi
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
arch/arm/boot/dts/armada-xp.dtsi

index 6403acdbb75fe5db201026750d23fd105585769a..e766f8bfc86f6e75e53d5151353b9d225ed79605 100644 (file)
        };
 
        soc {
-               serial@d0012000 {
+               serial@12000 {
                        clock-frequency = <200000000>;
                        status = "okay";
                };
-               sata@d00a0000 {
+               sata@a0000 {
                        nr-ports = <2>;
                        status = "okay";
                };
                        };
                };
 
-               ethernet@d0070000 {
+               ethernet@70000 {
                        status = "okay";
                        phy = <&phy0>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0074000 {
+               ethernet@74000 {
                        status = "okay";
                        phy = <&phy1>;
                        phy-mode = "rgmii-id";
                };
 
-               mvsdio@d00d4000 {
+               mvsdio@d4000 {
                        pinctrl-0 = <&sdio_pins1>;
                        pinctrl-names = "default";
                        /*
                        /* No CD or WP GPIOs */
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        status = "okay";
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        status = "okay";
                };
 
-               spi0: spi@d0010600 {
+               spi0: spi@10600 {
                        status = "okay";
 
                        spi-flash@0 {
index 58ee79372206e2100c08d106d1baef256553076d..6530ae3ed66103bd772dcc717b3388b7884d3e84 100644 (file)
        };
 
        soc {
-               serial@d0012000 {
+               serial@12000 {
                        clock-frequency = <200000000>;
                        status = "okay";
                };
-               timer@d0020300 {
+               timer@20300 {
                        clock-frequency = <600000000>;
                        status = "okay";
                };
                                reg = <1>;
                        };
                };
-               ethernet@d0070000 {
+               ethernet@70000 {
                        status = "okay";
                        phy = <&phy0>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0074000 {
+               ethernet@74000 {
                        status = "okay";
                        phy = <&phy1>;
                        phy-mode = "rgmii-id";
                };
 
-               mvsdio@d00d4000 {
+               mvsdio@d4000 {
                        pinctrl-0 = <&sdio_pins3>;
                        pinctrl-names = "default";
                        status = "okay";
                         */
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        status = "okay";
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        status = "okay";
                };
 
-               i2c@d0011000 {
+               i2c@11000 {
                        status = "okay";
                        clock-frequency = <100000>;
                        pca9505: pca9505@25 {
index 516dec31b46900dfb855ae8dd441bf5c30601da3..83d5c04197506848baf776003787cbb04d06d5c5 100644 (file)
        };
 
        soc {
-               serial@d0012000 {
+               serial@12000 {
                        clock-frequency = <200000000>;
                        status = "okay";
                };
-               sata@d00a0000 {
+               sata@a0000 {
                        nr-ports = <2>;
                        status = "okay";
                };
                        };
                };
 
-               ethernet@d0070000 {
+               ethernet@70000 {
                        status = "okay";
                        phy = <&phy0>;
                        phy-mode = "sgmii";
                };
-               ethernet@d0074000 {
+               ethernet@74000 {
                        status = "okay";
                        phy = <&phy1>;
                        phy-mode = "rgmii-id";
                };
 
-               mvsdio@d00d4000 {
+               mvsdio@d4000 {
                        pinctrl-0 = <&sdio_pins1>;
                        pinctrl-names = "default";
                        status = "okay";
                        /* No CD or WP GPIOs */
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        status = "okay";
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        status = "okay";
                };
        };
index 972448c4880c44fbff521a29961f522c7f3272b2..da40ce5711b3fee33c783e2791c8ecc444b57b05 100644 (file)
                };
        };
 
+
        soc {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "simple-bus";
                interrupt-parent = <&mpic>;
-               ranges;
+               ranges = <0 0xd0000000 0x100000>;
 
-               mpic: interrupt-controller@d0020000 {
-                       compatible = "marvell,mpic";
-                       #interrupt-cells = <1>;
-                       #size-cells = <1>;
-                       interrupt-controller;
+               mpic: interrupt-controller@20000 {
+                               compatible = "marvell,mpic";
+                               #interrupt-cells = <1>;
+                               #size-cells = <1>;
+                               interrupt-controller;
                };
 
-               coherency-fabric@d0020200 {
-                       compatible = "marvell,coherency-fabric";
-                       reg = <0xd0020200 0xb0>,
-                             <0xd0021810 0x1c>;
+               coherency-fabric@20200 {
+                               compatible = "marvell,coherency-fabric";
+                               reg = <0x20200 0xb0>,
+                                     <0x21810 0x1c>;
                };
 
-               serial@d0012000 {
+               serial@12000 {
                                compatible = "snps,dw-apb-uart";
-                               reg = <0xd0012000 0x100>;
+                               reg = <0x12000 0x100>;
                                reg-shift = <2>;
                                interrupts = <41>;
                                reg-io-width = <1>;
                                status = "disabled";
                };
-               serial@d0012100 {
+               serial@12100 {
                                compatible = "snps,dw-apb-uart";
-                               reg = <0xd0012100 0x100>;
+                               reg = <0x12100 0x100>;
                                reg-shift = <2>;
                                interrupts = <42>;
                                reg-io-width = <1>;
                                status = "disabled";
                };
 
-               timer@d0020300 {
+               timer@20300 {
                               compatible = "marvell,armada-370-xp-timer";
-                              reg = <0xd0020300 0x30>,
-                              <0xd0021040 0x30>;
+                              reg = <0x20300 0x30>,
+                              <0x21040 0x30>;
                               interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
                               clocks = <&coreclk 2>;
                };
 
-               sata@d00a0000 {
+               sata@a0000 {
                        compatible = "marvell,orion-sata";
-                       reg = <0xd00a0000 0x2400>;
+                       reg = <0xa0000 0x2400>;
                        interrupts = <55>;
                        clocks = <&gateclk 15>, <&gateclk 30>;
                        clock-names = "0", "1";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "marvell,orion-mdio";
-                       reg = <0xd0072004 0x4>;
+                       reg = <0x72004 0x4>;
                };
 
-               ethernet@d0070000 {
+               ethernet@70000 {
                                compatible = "marvell,armada-370-neta";
-                               reg = <0xd0070000 0x2500>;
+                               reg = <0x70000 0x2500>;
                                interrupts = <8>;
                                clocks = <&gateclk 4>;
                                status = "disabled";
                };
 
-               ethernet@d0074000 {
+               ethernet@74000 {
                                compatible = "marvell,armada-370-neta";
-                               reg = <0xd0074000 0x2500>;
+                               reg = <0x74000 0x2500>;
                                interrupts = <10>;
                                clocks = <&gateclk 3>;
                                status = "disabled";
                };
 
-               i2c0: i2c@d0011000 {
+               i2c0: i2c@11000 {
                        compatible = "marvell,mv64xxx-i2c";
-                       reg = <0xd0011000 0x20>;
+                       reg = <0x11000 0x20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        interrupts = <31>;
                        status = "disabled";
                };
 
-               i2c1: i2c@d0011100 {
+               i2c1: i2c@11100 {
                        compatible = "marvell,mv64xxx-i2c";
-                       reg = <0xd0011100 0x20>;
+                       reg = <0x11100 0x20>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        interrupts = <32>;
 
                rtc@10300 {
                        compatible = "marvell,orion-rtc";
-                       reg = <0xd0010300 0x20>;
+                       reg = <0x10300 0x20>;
                        interrupts = <50>;
                };
 
-               mvsdio@d00d4000 {
+               mvsdio@d4000 {
                        compatible = "marvell,orion-sdio";
-                       reg = <0xd00d4000 0x200>;
+                       reg = <0xd4000 0x200>;
                        interrupts = <54>;
                        clocks = <&gateclk 17>;
                        status = "disabled";
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        compatible = "marvell,orion-ehci";
-                       reg = <0xd0050000 0x500>;
+                       reg = <0x50000 0x500>;
                        interrupts = <45>;
                        status = "disabled";
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        compatible = "marvell,orion-ehci";
-                       reg = <0xd0051000 0x500>;
+                       reg = <0x51000 0x500>;
                        interrupts = <46>;
                        status = "disabled";
                };
 
-               spi0: spi@d0010600 {
+               spi0: spi@10600 {
                        compatible = "marvell,orion-spi";
-                       reg = <0xd0010600 0x28>;
+                       reg = <0x10600 0x28>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        cell-index = <0>;
                        status = "disabled";
                };
 
-               spi1: spi@d0010680 {
+               spi1: spi@10680 {
                        compatible = "marvell,orion-spi";
-                       reg = <0xd0010680 0x28>;
+                       reg = <0x10680 0x28>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        cell-index = <1>;
                        status = "disabled";
                };
 
-               devbus-bootcs@d0010400 {
+               devbus-bootcs@10400 {
                        compatible = "marvell,mvebu-devbus";
-                       reg = <0xd0010400 0x8>;
+                       reg = <0x10400 0x8>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        clocks = <&coreclk 0>;
                        status = "disabled";
                };
 
-               devbus-cs0@d0010408 {
+               devbus-cs0@10408 {
                        compatible = "marvell,mvebu-devbus";
-                       reg = <0xd0010408 0x8>;
+                       reg = <0x10408 0x8>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        clocks = <&coreclk 0>;
                        status = "disabled";
                };
 
-               devbus-cs1@d0010410 {
+               devbus-cs1@10410 {
                        compatible = "marvell,mvebu-devbus";
-                       reg = <0xd0010410 0x8>;
+                       reg = <0x10410 0x8>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        clocks = <&coreclk 0>;
                        status = "disabled";
                };
 
-               devbus-cs2@d0010418 {
+               devbus-cs2@10418 {
                        compatible = "marvell,mvebu-devbus";
-                       reg = <0xd0010418 0x8>;
+                       reg = <0x10418 0x8>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        clocks = <&coreclk 0>;
                        status = "disabled";
                };
 
-               devbus-cs3@d0010420 {
+               devbus-cs3@10420 {
                        compatible = "marvell,mvebu-devbus";
-                       reg = <0xd0010420 0x8>;
+                       reg = <0x10420 0x8>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        clocks = <&coreclk 0>;
index 209caeb748faa76416062d124643ca70afc8227b..5c4fa655fc34497aa1e50b4f46af706eeea43b74 100644 (file)
        };
 
        soc {
-               mpic: interrupt-controller@d0020000 {
-                       reg = <0xd0020a00 0x1d0>,
-                             <0xd0021870 0x58>;
+
+               mpic: interrupt-controller@20000 {
+                       reg = <0x20a00 0x1d0>,
+                             <0x21870 0x58>;
                };
 
-               system-controller@d0018200 {
+               system-controller@18200 {
                                compatible = "marvell,armada-370-xp-system-controller";
-                               reg = <0xd0018200 0x100>;
+                               reg = <0x18200 0x100>;
                };
 
                L2: l2-cache {
@@ -47,7 +48,7 @@
 
                pinctrl {
                        compatible = "marvell,mv88f6710-pinctrl";
-                       reg = <0xd0018000 0x38>;
+                       reg = <0x18000 0x38>;
 
                        sdio_pins1: sdio-pins1 {
                              marvell,pins = "mpp9",  "mpp11", "mpp12",
@@ -68,9 +69,9 @@
                        };
                };
 
-               gpio0: gpio@d0018100 {
+               gpio0: gpio@18100 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018100 0x40>;
+                       reg = <0x18100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -79,9 +80,9 @@
                        interrupts = <82>, <83>, <84>, <85>;
                };
 
-               gpio1: gpio@d0018140 {
+               gpio1: gpio@18140 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018140 0x40>;
+                       reg = <0x18140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -90,9 +91,9 @@
                        interrupts = <87>, <88>, <89>, <90>;
                };
 
-               gpio2: gpio@d0018180 {
+               gpio2: gpio@18180 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018180 0x40>;
+                       reg = <0x18180 0x40>;
                        ngpios = <2>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupts = <91>;
                };
 
-               coreclk: mvebu-sar@d0018230 {
+               coreclk: mvebu-sar@18230 {
                        compatible = "marvell,armada-370-core-clock";
-                       reg = <0xd0018230 0x08>;
+                       reg = <0x18230 0x08>;
                        #clock-cells = <1>;
                };
 
-               gateclk: clock-gating-control@d0018220 {
+               gateclk: clock-gating-control@18220 {
                        compatible = "marvell,armada-370-gating-clock";
-                       reg = <0xd0018220 0x4>;
+                       reg = <0x18220 0x4>;
                        clocks = <&coreclk 0>;
                        #clock-cells = <1>;
                };
 
-               xor@d0060800 {
+               xor@60800 {
                        compatible = "marvell,orion-xor";
-                       reg = <0xd0060800 0x100
-                              0xd0060A00 0x100>;
+                       reg = <0x60800 0x100
+                              0x60A00 0x100>;
                        status = "okay";
 
                        xor00 {
                        };
                };
 
-               xor@d0060900 {
+               xor@60900 {
                        compatible = "marvell,orion-xor";
-                       reg = <0xd0060900 0x100
-                              0xd0060b00 0x100>;
+                       reg = <0x60900 0x100
+                              0x60b00 0x100>;
                        status = "okay";
 
                        xor10 {
                        };
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        clocks = <&coreclk 0>;
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        clocks = <&coreclk 0>;
                };
 
-               thermal@d0018300 {
+               thermal@18300 {
                        compatible = "marvell,armada370-thermal";
-                       reg = <0xd0018300 0x4
-                              0xd0018304 0x4>;
+                       reg = <0x18300 0x4
+                              0x18304 0x4>;
                        status = "okay";
                };
 
 
                        bus-range = <0x00 0xff>;
 
-                       reg = <0xd0040000 0x2000>, <0xd0080000 0x2000>;
+                       reg = <0x40000 0x2000>, <0x80000 0x2000>;
 
                        reg-names = "pcie0.0", "pcie1.0";
 
-                       ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
-                                 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
+                       ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+                                 0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
                                  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
                                  0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
 
                        pcie@1,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
                                reg = <0x0800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@2,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+                               assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
                                reg = <0x1000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
index 54cc5bb705fb0e1fcb38bbd2d82340ec28473533..e37863f826b942d0aef2aa55a60c1fb2318f538d 100644 (file)
        };
 
        soc {
-               serial@d0012000 {
+               serial@12000 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012100 {
+               serial@12100 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012200 {
+               serial@12200 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012300 {
+               serial@12300 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
 
-               sata@d00a0000 {
+               sata@a0000 {
                        nr-ports = <2>;
                        status = "okay";
                };
                        };
                };
 
-               ethernet@d0070000 {
+               ethernet@70000 {
                        status = "okay";
                        phy = <&phy0>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0074000 {
+               ethernet@74000 {
                        status = "okay";
                        phy = <&phy1>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0030000 {
+               ethernet@30000 {
                        status = "okay";
                        phy = <&phy2>;
                        phy-mode = "sgmii";
                };
-               ethernet@d0034000 {
+               ethernet@34000 {
                        status = "okay";
                        phy = <&phy3>;
                        phy-mode = "sgmii";
                };
 
-               mvsdio@d00d4000 {
+               mvsdio@d4000 {
                        pinctrl-0 = <&sdio_pins>;
                        pinctrl-names = "default";
                        status = "okay";
                        /* No CD or WP GPIOs */
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        status = "okay";
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        status = "okay";
                };
 
-               usb@d0052000 {
+               usb@52000 {
                        status = "okay";
                };
 
-               spi0: spi@d0010600 {
+               spi0: spi@10600 {
                        status = "okay";
 
                        spi-flash@0 {
index 04f28a712b985e1ed1d3a44b49b779d6083d73a5..55bcbff394696f5fcd478e8860a38681a22440bc 100644 (file)
        };
 
        soc {
-               serial@d0012000 {
+               serial@12000 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012100 {
+               serial@12100 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012200 {
+               serial@12200 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012300 {
+               serial@12300 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
 
-               sata@d00a0000 {
+               sata@a0000 {
                        nr-ports = <2>;
                        status = "okay";
                };
                        };
                };
 
-               ethernet@d0070000 {
+               ethernet@70000 {
                        status = "okay";
                        phy = <&phy0>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0074000 {
+               ethernet@74000 {
                        status = "okay";
                        phy = <&phy1>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0030000 {
+               ethernet@30000 {
                        status = "okay";
                        phy = <&phy2>;
                        phy-mode = "rgmii-id";
                };
-               ethernet@d0034000 {
+               ethernet@34000 {
                        status = "okay";
                        phy = <&phy3>;
                        phy-mode = "rgmii-id";
                };
 
-               spi0: spi@d0010600 {
+               spi0: spi@10600 {
                        status = "okay";
 
                        spi-flash@0 {
                        };
                };
 
-               devbus-bootcs@d0010400 {
+               devbus-bootcs@10400 {
                        status = "okay";
                        ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
 
index e072a53dc9b07e2d13f775ca825cce436899e1cc..12905abf4ca3bebe7c67c790b51e359a2f4e7021 100644 (file)
@@ -46,7 +46,7 @@
        soc {
                pinctrl {
                        compatible = "marvell,mv78230-pinctrl";
-                       reg = <0xd0018000 0x38>;
+                       reg = <0x18000 0x38>;
 
                        sdio_pins: sdio-pins {
                                marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -55,9 +55,9 @@
                        };
                };
 
-               gpio0: gpio@d0018100 {
+               gpio0: gpio@18100 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018100 0x40>;
+                       reg = <0x18100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -66,9 +66,9 @@
                        interrupts = <82>, <83>, <84>, <85>;
                };
 
-               gpio1: gpio@d0018140 {
+               gpio1: gpio@18140 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018140 0x40>;
+                       reg = <0x18140 0x40>;
                        ngpios = <17>;
                        gpio-controller;
                        #gpio-cells = <2>;
 
                        bus-range = <0x00 0xff>;
 
-                       ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
-                                 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
-                                 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
-                                 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
-                                 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
+                       ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+                                 0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+                                 0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+                                 0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+                                 0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
                                  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
                                  0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
 
                        pcie@1,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
                                reg = <0x0800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@2,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
                                reg = <0x1000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@3,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
                                reg = <0x1800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@4,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
                                reg = <0x2000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@9,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
                                reg = <0x4800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
index 6dae1bc59baf007b9293c5bc32edad3f8e388c32..1faacd13d51402205a77554746fb2938a89cc58a 100644 (file)
@@ -47,7 +47,7 @@
        soc {
                pinctrl {
                        compatible = "marvell,mv78260-pinctrl";
-                       reg = <0xd0018000 0x38>;
+                       reg = <0x18000 0x38>;
 
                        sdio_pins: sdio-pins {
                                marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -56,9 +56,9 @@
                        };
                };
 
-               gpio0: gpio@d0018100 {
+               gpio0: gpio@18100 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018100 0x40>;
+                       reg = <0x18100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -67,9 +67,9 @@
                        interrupts = <82>, <83>, <84>, <85>;
                };
 
-               gpio1: gpio@d0018140 {
+               gpio1: gpio@18140 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018140 0x40>;
+                       reg = <0x18140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -78,9 +78,9 @@
                        interrupts = <87>, <88>, <89>, <90>;
                };
 
-               gpio2: gpio@d0018180 {
+               gpio2: gpio@18180 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018180 0x40>;
+                       reg = <0x18180 0x40>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -89,9 +89,9 @@
                        interrupts = <91>;
                };
 
-               ethernet@d0034000 {
+               ethernet@34000 {
                                compatible = "marvell,armada-370-neta";
-                               reg = <0xd0034000 0x2500>;
+                               reg = <0x34000 0x2500>;
                                interrupts = <14>;
                                clocks = <&gateclk 1>;
                                status = "disabled";
 
                        bus-range = <0x00 0xff>;
 
-                       ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
-                                 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
-                                 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
-                                 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
-                                 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
-                                 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
-                                 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000   /* Port 3.0 registers */
+                       ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+                                 0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+                                 0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+                                 0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+                                 0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+                                 0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+                                 0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
                                  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
                                  0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
 
                        pcie@1,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
                                reg = <0x0800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@2,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
                                reg = <0x1000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@3,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
                                reg = <0x1800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@4,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
                                reg = <0x2000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@9,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
                                reg = <0x4800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@10,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0082000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
                                reg = <0x5000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
index b9da5b8ae288d0df3415ac54f5989934d9f3aa4c..ce4f80a82854c7455eb70ac483fb401024545dac 100644 (file)
@@ -62,7 +62,7 @@
        soc {
                pinctrl {
                        compatible = "marvell,mv78460-pinctrl";
-                       reg = <0xd0018000 0x38>;
+                       reg = <0x18000 0x38>;
 
                        sdio_pins: sdio-pins {
                                marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -71,9 +71,9 @@
                        };
                };
 
-               gpio0: gpio@d0018100 {
+               gpio0: gpio@18100 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018100 0x40>;
+                       reg = <0x18100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -82,9 +82,9 @@
                        interrupts = <82>, <83>, <84>, <85>;
                };
 
-               gpio1: gpio@d0018140 {
+               gpio1: gpio@18140 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018140 0x40>;
+                       reg = <0x18140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -93,9 +93,9 @@
                        interrupts = <87>, <88>, <89>, <90>;
                };
 
-               gpio2: gpio@d0018180 {
+               gpio2: gpio@18180 {
                        compatible = "marvell,orion-gpio";
-                       reg = <0xd0018180 0x40>;
+                       reg = <0x18180 0x40>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupts = <91>;
                };
 
-               ethernet@d0034000 {
+               ethernet@34000 {
                                compatible = "marvell,armada-370-neta";
-                               reg = <0xd0034000 0x2500>;
+                               reg = <0x34000 0x2500>;
                                interrupts = <14>;
                                clocks = <&gateclk 1>;
                                status = "disabled";
 
                        bus-range = <0x00 0xff>;
 
-                       ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
-                                 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
-                                 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
-                                 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
-                                 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
-                                 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
-                                 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000   /* Port 3.0 registers */
-                                 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000   /* Port 1.1 registers */
-                                 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000   /* Port 1.2 registers */
-                                 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000   /* Port 1.3 registers */
+                       ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+                                 0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+                                 0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+                                 0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+                                 0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+                                 0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+                                 0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+                                 0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
+                                 0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
+                                 0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
                                  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
                                  0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
 
                        pcie@1,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+                               assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
                                reg = <0x0800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@2,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+                               assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
                                reg = <0x1000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@3,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+                               assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
                                reg = <0x1800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@4,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+                               assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
                                reg = <0x2000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@5,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+                               assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
                                reg = <0x2800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@6,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+                               assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
                                reg = <0x3000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@7,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+                               assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
                                reg = <0x3800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@8,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+                               assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
                                reg = <0x4000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
                        };
                        pcie@9,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+                               assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
                                reg = <0x4800 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
 
                        pcie@10,0 {
                                device_type = "pci";
-                               assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+                               assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
                                reg = <0x5000 0 0 0 0>;
                                #address-cells = <3>;
                                #size-cells = <2>;
index 9d04f04d4e39eae0a2eb5e059bdab179e01223c7..e9bc8bf90263f9e57abbb2c6873aae3ab000bbbf 100644 (file)
        };
 
        soc {
-               serial@d0012000 {
+               serial@12000 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
-               serial@d0012100 {
+               serial@12100 {
                        clock-frequency = <250000000>;
                        status = "okay";
                };
                        };
                };
 
-               ethernet@d0070000 {
+               ethernet@70000 {
                        status = "okay";
                        phy = <&phy0>;
                        phy-mode = "sgmii";
                };
-               ethernet@d0074000 {
+               ethernet@74000 {
                        status = "okay";
                        phy = <&phy1>;
                        phy-mode = "sgmii";
                };
-               ethernet@d0030000 {
+               ethernet@30000 {
                        status = "okay";
                        phy = <&phy2>;
                        phy-mode = "sgmii";
                };
-               ethernet@d0034000 {
+               ethernet@34000 {
                        status = "okay";
                        phy = <&phy3>;
                        phy-mode = "sgmii";
                };
-               i2c@d0011000 {
+               i2c@11000 {
                        status = "okay";
                        clock-frequency = <400000>;
                };
-               i2c@d0011100 {
+               i2c@11100 {
                        status = "okay";
                        clock-frequency = <400000>;
 
                                reg = <0x30>;
                        };
                };
-               sata@d00a0000 {
+               sata@a0000 {
                        nr-ports = <2>;
                        status = "okay";
                };
-               usb@d0050000 {
+               usb@50000 {
                        status = "okay";
                };
-               usb@d0051000 {
+               usb@51000 {
                        status = "okay";
                };
 
-               devbus-bootcs@d0010400 {
+               devbus-bootcs@10400 {
                        status = "okay";
                        ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
 
index ef3d4136224125fe6de0747553a35af16d48e16c..465b9fa116ea98eabc561b6fbf3ef3a024662060 100644 (file)
        model = "Marvell Armada XP family SoC";
        compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
+
        soc {
                L2: l2-cache {
                        compatible = "marvell,aurora-system-cache";
-                       reg = <0xd0008000 0x1000>;
+                       reg = <0x08000 0x1000>;
                        cache-id-part = <0x100>;
                        wt-override;
                };
 
-               mpic: interrupt-controller@d0020000 {
-                     reg = <0xd0020a00 0x2d0>,
-                           <0xd0021070 0x58>;
+               mpic: interrupt-controller@20000 {
+                     reg = <0x20a00 0x2d0>,
+                           <0x21070 0x58>;
                };
 
-               armada-370-xp-pmsu@d0022000 {
+               armada-370-xp-pmsu@22000 {
                        compatible = "marvell,armada-370-xp-pmsu";
-                       reg = <0xd0022100 0x430>,
-                             <0xd0020800 0x20>;
+                       reg = <0x22100 0x430>,
+                             <0x20800 0x20>;
                };
 
-               serial@d0012200 {
+               serial@12200 {
                                compatible = "snps,dw-apb-uart";
-                               reg = <0xd0012200 0x100>;
+                               reg = <0x12200 0x100>;
                                reg-shift = <2>;
                                interrupts = <43>;
                                reg-io-width = <1>;
                                status = "disabled";
                };
-               serial@d0012300 {
+               serial@12300 {
                                compatible = "snps,dw-apb-uart";
-                               reg = <0xd0012300 0x100>;
+                               reg = <0x12300 0x100>;
                                reg-shift = <2>;
                                interrupts = <44>;
                                reg-io-width = <1>;
                                status = "disabled";
                };
 
-               timer@d0020300 {
+               timer@20300 {
                                marvell,timer-25Mhz;
                };
 
-               coreclk: mvebu-sar@d0018230 {
+               coreclk: mvebu-sar@18230 {
                        compatible = "marvell,armada-xp-core-clock";
-                       reg = <0xd0018230 0x08>;
+                       reg = <0x18230 0x08>;
                        #clock-cells = <1>;
                };
 
-               cpuclk: clock-complex@d0018700 {
+               cpuclk: clock-complex@18700 {
                        #clock-cells = <1>;
                        compatible = "marvell,armada-xp-cpu-clock";
-                       reg = <0xd0018700 0xA0>;
+                       reg = <0x18700 0xA0>;
                        clocks = <&coreclk 1>;
                };
 
-               gateclk: clock-gating-control@d0018220 {
+               gateclk: clock-gating-control@18220 {
                        compatible = "marvell,armada-xp-gating-clock";
-                       reg = <0xd0018220 0x4>;
+                       reg = <0x18220 0x4>;
                        clocks = <&coreclk 0>;
                        #clock-cells = <1>;
                };
 
-               system-controller@d0018200 {
+               system-controller@18200 {
                                compatible = "marvell,armada-370-xp-system-controller";
-                               reg = <0xd0018200 0x500>;
+                               reg = <0x18200 0x500>;
                };
 
-               ethernet@d0030000 {
+               ethernet@30000 {
                                compatible = "marvell,armada-370-neta";
-                               reg = <0xd0030000 0x2500>;
+                               reg = <0x30000 0x2500>;
                                interrupts = <12>;
                                clocks = <&gateclk 2>;
                                status = "disabled";
                };
 
-               xor@d0060900 {
+               xor@60900 {
                        compatible = "marvell,orion-xor";
-                       reg = <0xd0060900 0x100
-                              0xd0060b00 0x100>;
+                       reg = <0x60900 0x100
+                              0x60b00 0x100>;
                        clocks = <&gateclk 22>;
                        status = "okay";
 
                        };
                };
 
-               xor@d00f0900 {
+               xor@f0900 {
                        compatible = "marvell,orion-xor";
-                       reg = <0xd00F0900 0x100
-                              0xd00F0B00 0x100>;
+                       reg = <0xF0900 0x100
+                              0xF0B00 0x100>;
                        clocks = <&gateclk 28>;
                        status = "okay";
 
                        };
                };
 
-               usb@d0050000 {
+               usb@50000 {
                        clocks = <&gateclk 18>;
                };
 
-               usb@d0051000 {
+               usb@51000 {
                        clocks = <&gateclk 19>;
                };
 
-               usb@d0052000 {
+               usb@52000 {
                        compatible = "marvell,orion-ehci";
-                       reg = <0xd0052000 0x500>;
+                       reg = <0x52000 0x500>;
                        interrupts = <47>;
                        clocks = <&gateclk 20>;
                        status = "disabled";
                };
 
-               thermal@d00182b0 {
+               thermal@182b0 {
                        compatible = "marvell,armadaxp-thermal";
-                       reg = <0xd00182b0 0x4
-                              0xd00184d0 0x4>;
+                       reg = <0x182b0 0x4
+                              0x184d0 0x4>;
                        status = "okay";
                };
        };