/* driver is often null here; dev_dbg() would oops */
pr_debug ("usb %s: uevent\n", dev->bus_id);
- if (is_usb_device(dev))
- return 0;
- else {
+ if (is_usb_device(dev)) {
+ usb_dev = to_usb_device(dev);
+ alt = NULL;
+ } else {
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
alt = intf->cur_altsetting;
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
+ if (!is_usb_device(dev)) {
+
+ if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"INTERFACE=%d/%d/%d",
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
alt->desc.bInterfaceProtocol))
- return -ENOMEM;
+ return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
+ if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
le16_to_cpu(usb_dev->descriptor.idVendor),
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
alt->desc.bInterfaceProtocol))
- return -ENOMEM;
+ return -ENOMEM;
+ }
envp[i] = NULL;
#ifdef CONFIG_PM
-static int verify_suspended(struct device *dev, void *unused)
+static int usb_suspend(struct device *dev, pm_message_t message)
{
- if (dev->driver == NULL)
- return 0;
- return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
-}
+ struct usb_device *udev;
+ struct usb_device_driver *udriver;
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+ int status;
-static int usb_generic_suspend(struct device *dev, pm_message_t message)
-{
- struct usb_interface *intf;
- struct usb_driver *driver;
- int status;
-
- /* USB devices enter SUSPEND state through their hubs, but can be
- * marked for FREEZE as soon as their children are already idled.
- * But those semantics are useless, so we equate the two (sigh).
- */
if (is_usb_device(dev)) {
+ if (dev->driver == NULL)
+ return 0;
+ udev = to_usb_device(dev);
+ udriver = to_usb_device_driver(dev->driver);
if (dev->power.power_state.event == message.event)
return 0;
- /* we need to rule out bogus requests through sysfs */
- status = device_for_each_child(dev, NULL, verify_suspended);
- if (status)
- return status;
- return usb_port_suspend(to_usb_device(dev));
+ return udriver->suspend(udev, message);
}
if (dev->driver == NULL)
return status;
}
-static int usb_generic_resume(struct device *dev)
+static int usb_resume(struct device *dev)
{
- struct usb_interface *intf;
- struct usb_driver *driver;
- struct usb_device *udev;
- int status;
+ struct usb_device *udev;
+ struct usb_device_driver *udriver;
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+ int status;
if (dev->power.power_state.event == PM_EVENT_ON)
return 0;
/* devices resume through their hubs */
if (is_usb_device(dev)) {
+ if (dev->driver == NULL)
+ return 0;
udev = to_usb_device(dev);
+ udriver = to_usb_device_driver(dev->driver);
if (udev->state == USB_STATE_NOTATTACHED)
return 0;
- return usb_port_resume(udev);
+ return udriver->resume(udev);
}
if (dev->driver == NULL) {
.match = usb_device_match,
.uevent = usb_uevent,
#ifdef CONFIG_PM
- .suspend = usb_generic_suspend,
- .resume = usb_generic_resume,
+ .suspend = usb_suspend,
+ .resume = usb_resume,
#endif
};
#include <linux/usb.h>
#include "usb.h"
+static inline const char *plural(int n)
+{
+ return (n == 1 ? "" : "s");
+}
+
+static int choose_configuration(struct usb_device *udev)
+{
+ int i;
+ int num_configs;
+ int insufficient_power = 0;
+ struct usb_host_config *c, *best;
+
+ best = NULL;
+ c = udev->config;
+ num_configs = udev->descriptor.bNumConfigurations;
+ for (i = 0; i < num_configs; (i++, c++)) {
+ struct usb_interface_descriptor *desc = NULL;
+
+ /* It's possible that a config has no interfaces! */
+ if (c->desc.bNumInterfaces > 0)
+ desc = &c->intf_cache[0]->altsetting->desc;
+
+ /*
+ * HP's USB bus-powered keyboard has only one configuration
+ * and it claims to be self-powered; other devices may have
+ * similar errors in their descriptors. If the next test
+ * were allowed to execute, such configurations would always
+ * be rejected and the devices would not work as expected.
+ * In the meantime, we run the risk of selecting a config
+ * that requires external power at a time when that power
+ * isn't available. It seems to be the lesser of two evils.
+ *
+ * Bugzilla #6448 reports a device that appears to crash
+ * when it receives a GET_DEVICE_STATUS request! We don't
+ * have any other way to tell whether a device is self-powered,
+ * but since we don't use that information anywhere but here,
+ * the call has been removed.
+ *
+ * Maybe the GET_DEVICE_STATUS call and the test below can
+ * be reinstated when device firmwares become more reliable.
+ * Don't hold your breath.
+ */
+#if 0
+ /* Rule out self-powered configs for a bus-powered device */
+ if (bus_powered && (c->desc.bmAttributes &
+ USB_CONFIG_ATT_SELFPOWER))
+ continue;
+#endif
+
+ /*
+ * The next test may not be as effective as it should be.
+ * Some hubs have errors in their descriptor, claiming
+ * to be self-powered when they are really bus-powered.
+ * We will overestimate the amount of current such hubs
+ * make available for each port.
+ *
+ * This is a fairly benign sort of failure. It won't
+ * cause us to reject configurations that we should have
+ * accepted.
+ */
+
+ /* Rule out configs that draw too much bus current */
+ if (c->desc.bMaxPower * 2 > udev->bus_mA) {
+ insufficient_power++;
+ continue;
+ }
+
+ /* If the first config's first interface is COMM/2/0xff
+ * (MSFT RNDIS), rule it out unless Linux has host-side
+ * RNDIS support. */
+ if (i == 0 && desc
+ && desc->bInterfaceClass == USB_CLASS_COMM
+ && desc->bInterfaceSubClass == 2
+ && desc->bInterfaceProtocol == 0xff) {
+#ifndef CONFIG_USB_NET_RNDIS_HOST
+ continue;
+#else
+ best = c;
+#endif
+ }
+
+ /* From the remaining configs, choose the first one whose
+ * first interface is for a non-vendor-specific class.
+ * Reason: Linux is more likely to have a class driver
+ * than a vendor-specific driver. */
+ else if (udev->descriptor.bDeviceClass !=
+ USB_CLASS_VENDOR_SPEC &&
+ (!desc || desc->bInterfaceClass !=
+ USB_CLASS_VENDOR_SPEC)) {
+ best = c;
+ break;
+ }
+
+ /* If all the remaining configs are vendor-specific,
+ * choose the first one. */
+ else if (!best)
+ best = c;
+ }
+
+ if (insufficient_power > 0)
+ dev_info(&udev->dev, "rejected %d configuration%s "
+ "due to insufficient available bus power\n",
+ insufficient_power, plural(insufficient_power));
+
+ if (best) {
+ i = best->desc.bConfigurationValue;
+ dev_info(&udev->dev,
+ "configuration #%d chosen from %d choice%s\n",
+ i, num_configs, plural(num_configs));
+ } else {
+ i = -1;
+ dev_warn(&udev->dev,
+ "no configuration chosen from %d choice%s\n",
+ num_configs, plural(num_configs));
+ }
+ return i;
+}
+
static int generic_probe(struct usb_device *udev)
{
+ int err, c;
+
+ /* put device-specific files into sysfs */
+ usb_create_sysfs_dev_files(udev);
+
+ /* Choose and set the configuration. This registers the interfaces
+ * with the driver core and lets interface drivers bind to them.
+ */
+ c = choose_configuration(udev);
+ if (c >= 0) {
+ err = usb_set_configuration(udev, c);
+ if (err) {
+ dev_err(&udev->dev, "can't set config #%d, error %d\n",
+ c, err);
+ /* This need not be fatal. The user can try to
+ * set other configurations. */
+ }
+ }
+
+ /* USB device state == configured ... usable */
+ usb_notify_add_device(udev);
+
return 0;
}
+
static void generic_disconnect(struct usb_device *udev)
{
+ usb_notify_remove_device(udev);
+
/* if this is only an unbind, not a physical disconnect, then
* unconfigure the device */
if (udev->state == USB_STATE_CONFIGURED)
usb_set_configuration(udev, 0);
+ usb_remove_sysfs_dev_files(udev);
+
/* in case the call failed or the device was suspended */
if (udev->state >= USB_STATE_CONFIGURED)
usb_disable_device(udev, 0);
}
+#ifdef CONFIG_PM
+
+static int verify_suspended(struct device *dev, void *unused)
+{
+ if (dev->driver == NULL)
+ return 0;
+ return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
+}
+
+static int generic_suspend(struct usb_device *udev, pm_message_t msg)
+{
+ int status;
+
+ /* rule out bogus requests through sysfs */
+ status = device_for_each_child(&udev->dev, NULL, verify_suspended);
+ if (status)
+ return status;
+
+ /* USB devices enter SUSPEND state through their hubs, but can be
+ * marked for FREEZE as soon as their children are already idled.
+ * But those semantics are useless, so we equate the two (sigh).
+ */
+ return usb_port_suspend(udev);
+}
+
+static int generic_resume(struct usb_device *udev)
+{
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
+
+ return usb_port_resume(udev);
+}
+
+#endif /* CONFIG_PM */
+
struct usb_device_driver usb_generic_driver = {
.name = "usb",
.probe = generic_probe,
.disconnect = generic_disconnect,
+#ifdef CONFIG_PM
+ .suspend = generic_suspend,
+ .resume = generic_resume,
+#endif
};
* cleaning up all state associated with the current configuration
* so that the hardware is now fully quiesced.
*/
+ dev_dbg (&udev->dev, "unregistering device\n");
usb_disable_device(udev, 0);
- usb_notify_remove_device(udev);
+ usb_unlock_device(udev);
+
+ /* Unregister the device. The device driver is responsible
+ * for removing the device files from usbfs and sysfs and for
+ * de-configuring the device.
+ */
+ device_del(&udev->dev);
- /* Free the device number, remove the /proc/bus/usb entry and
- * the sysfs attributes, and delete the parent's children[]
+ /* Free the device number and delete the parent's children[]
* (or root_hub) pointer.
*/
- dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
spin_lock_irq(&device_state_lock);
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- usb_unlock_device(udev);
-
- device_unregister(&udev->dev);
-}
-
-static inline const char *plural(int n)
-{
- return (n == 1 ? "" : "s");
-}
-
-static int choose_configuration(struct usb_device *udev)
-{
- int i;
- int num_configs;
- int insufficient_power = 0;
- struct usb_host_config *c, *best;
-
- best = NULL;
- c = udev->config;
- num_configs = udev->descriptor.bNumConfigurations;
- for (i = 0; i < num_configs; (i++, c++)) {
- struct usb_interface_descriptor *desc = NULL;
-
- /* It's possible that a config has no interfaces! */
- if (c->desc.bNumInterfaces > 0)
- desc = &c->intf_cache[0]->altsetting->desc;
-
- /*
- * HP's USB bus-powered keyboard has only one configuration
- * and it claims to be self-powered; other devices may have
- * similar errors in their descriptors. If the next test
- * were allowed to execute, such configurations would always
- * be rejected and the devices would not work as expected.
- * In the meantime, we run the risk of selecting a config
- * that requires external power at a time when that power
- * isn't available. It seems to be the lesser of two evils.
- *
- * Bugzilla #6448 reports a device that appears to crash
- * when it receives a GET_DEVICE_STATUS request! We don't
- * have any other way to tell whether a device is self-powered,
- * but since we don't use that information anywhere but here,
- * the call has been removed.
- *
- * Maybe the GET_DEVICE_STATUS call and the test below can
- * be reinstated when device firmwares become more reliable.
- * Don't hold your breath.
- */
-#if 0
- /* Rule out self-powered configs for a bus-powered device */
- if (bus_powered && (c->desc.bmAttributes &
- USB_CONFIG_ATT_SELFPOWER))
- continue;
-#endif
-
- /*
- * The next test may not be as effective as it should be.
- * Some hubs have errors in their descriptor, claiming
- * to be self-powered when they are really bus-powered.
- * We will overestimate the amount of current such hubs
- * make available for each port.
- *
- * This is a fairly benign sort of failure. It won't
- * cause us to reject configurations that we should have
- * accepted.
- */
-
- /* Rule out configs that draw too much bus current */
- if (c->desc.bMaxPower * 2 > udev->bus_mA) {
- insufficient_power++;
- continue;
- }
-
- /* If the first config's first interface is COMM/2/0xff
- * (MSFT RNDIS), rule it out unless Linux has host-side
- * RNDIS support. */
- if (i == 0 && desc
- && desc->bInterfaceClass == USB_CLASS_COMM
- && desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff) {
-#ifndef CONFIG_USB_NET_RNDIS_HOST
- continue;
-#else
- best = c;
-#endif
- }
-
- /* From the remaining configs, choose the first one whose
- * first interface is for a non-vendor-specific class.
- * Reason: Linux is more likely to have a class driver
- * than a vendor-specific driver. */
- else if (udev->descriptor.bDeviceClass !=
- USB_CLASS_VENDOR_SPEC &&
- (!desc || desc->bInterfaceClass !=
- USB_CLASS_VENDOR_SPEC)) {
- best = c;
- break;
- }
-
- /* If all the remaining configs are vendor-specific,
- * choose the first one. */
- else if (!best)
- best = c;
- }
-
- if (insufficient_power > 0)
- dev_info(&udev->dev, "rejected %d configuration%s "
- "due to insufficient available bus power\n",
- insufficient_power, plural(insufficient_power));
-
- if (best) {
- i = best->desc.bConfigurationValue;
- dev_info(&udev->dev,
- "configuration #%d chosen from %d choice%s\n",
- i, num_configs, plural(num_configs));
- } else {
- i = -1;
- dev_warn(&udev->dev,
- "no configuration chosen from %d choice%s\n",
- num_configs, plural(num_configs));
- }
- return i;
+ put_device(&udev->dev);
}
#ifdef DEBUG
int usb_new_device(struct usb_device *udev)
{
int err;
- int c;
err = usb_get_configuration(udev);
if (err < 0) {
}
#endif
- /* put device-specific files into sysfs */
+ /* Register the device. The device driver is responsible
+ * for adding the device files to usbfs and sysfs and for
+ * configuring the device.
+ */
err = device_add (&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
goto fail;
}
- usb_create_sysfs_dev_files (udev);
-
- usb_lock_device(udev);
-
- /* choose and set the configuration. that registers the interfaces
- * with the driver core, and lets usb device drivers bind to them.
- */
- c = choose_configuration(udev);
- if (c >= 0) {
- err = usb_set_configuration(udev, c);
- if (err) {
- dev_err(&udev->dev, "can't set config #%d, error %d\n",
- c, err);
- /* This need not be fatal. The user can try to
- * set other configurations. */
- }
- }
-
- /* USB device state == configured ... usable */
- usb_notify_add_device(udev);
-
- usb_unlock_device(udev);
return 0;
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.dma_mask = bus->controller->dma_mask;
- dev->dev.driver = &usb_generic_driver.drvwrap.driver;
dev->dev.release = usb_release_dev;
dev->state = USB_STATE_ATTACHED;
git.samba.org / sfrench / cifs-2.6.git / commitdiff