ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index b0848a3d3d88f96f4f88a2114da2c4d3d9f0b9d2..5818718618b1e75867a9c5dbaba744d7c2e23d8c 100644 (file)
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
 */
 
 #include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -169,7 +170,8 @@
                                <0x10482000 0x1000>,
                                <0x10484000 0x2000>,
                                <0x10486000 0x2000>;
-                       interrupts = <1 9 0xf04>;
+                       interrupts = <GIC_PPI 9
+                                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
                };
 
                chipid: chipid@10000000 {
@@ -182,18 +184,18 @@
                        reg = <0x100B0000 0x1000>;
                        clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
                        clock-names = "fin_pll", "mct";
-                       interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 105 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 106 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 107 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 122 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 123 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 124 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 125 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 126 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 127 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 128 IRQ_TYPE_LEVEL_HIGH>,
-                                    <0 129 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                cci: cci@10F00000 {
@@ -219,25 +221,25 @@
                pinctrl_0: pinctrl@11600000 {
                        compatible = "samsung,exynos5260-pinctrl";
                        reg = <0x11600000 0x1000>;
-                       interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 
                        wakeup-interrupt-controller {
                                compatible = "samsung,exynos4210-wakeup-eint";
                                interrupt-parent = <&gic>;
-                               interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
                        };
                };
 
                pinctrl_1: pinctrl@12290000 {
                        compatible = "samsung,exynos5260-pinctrl";
                        reg = <0x12290000 0x1000>;
-                       interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                pinctrl_2: pinctrl@128B0000 {
                        compatible = "samsung,exynos5260-pinctrl";
                        reg = <0x128B0000 0x1000>;
-                       interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                pmu_system_controller: system-controller@10D50000 {
@@ -248,7 +250,7 @@
                uart0: serial@12C00000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12C00000 0x100>;
-                       interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -257,7 +259,7 @@
                uart1: serial@12C10000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12C10000 0x100>;
-                       interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -266,7 +268,7 @@
                uart2: serial@12C20000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12C20000 0x100>;
-                       interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -275,7 +277,7 @@
                uart3: serial@12860000 {
                        compatible = "samsung,exynos4210-uart";
                        reg = <0x12860000 0x100>;
-                       interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
                        clock-names = "uart", "clk_uart_baud0";
                        status = "disabled";
@@ -284,7 +286,7 @@
                mmc_0: mmc@12140000 {
                        compatible = "samsung,exynos5250-dw-mshc";
                        reg = <0x12140000 0x2000>;
-                       interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -296,7 +298,7 @@
                mmc_1: mmc@12150000 {
                        compatible = "samsung,exynos5250-dw-mshc";
                        reg = <0x12150000 0x2000>;
-                       interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -308,7 +310,7 @@
                mmc_2: mmc@12160000 {
                        compatible = "samsung,exynos5250-dw-mshc";
                        reg = <0x12160000 0x2000>;
-                       interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;