- how to use PPro Memory Type Range Registers to increase performance.
mutex-design.txt
- info on the generic mutex subsystem.
+namespaces/
+ - directory with various information about namespaces
nbd.txt
- info on a TCP implementation of a network block device.
netlabel/
procfs-guide.xml writing_usb_driver.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
- genericirq.xml s390-drivers.xml
+ genericirq.xml s390-drivers.xml uio-howto.xml
###
# The build process is as follows (targets):
</abstract>
<revhistory>
+ <revision>
+ <revnumber>0.4</revnumber>
+ <date>2007-11-26</date>
+ <authorinitials>hjk</authorinitials>
+ <revremark>Removed section about uio_dummy.</revremark>
+ </revision>
<revision>
<revnumber>0.3</revnumber>
<date>2007-04-29</date>
user space. This simplifies development and reduces the risk of
serious bugs within a kernel module.
</para>
+ <para>
+ Please note that UIO is not an universal driver interface. Devices
+ that are already handled well by other kernel subsystems (like
+ networking or serial or USB) are no candidates for an UIO driver.
+ Hardware that is ideally suited for an UIO driver fulfills all of
+ the following:
+ </para>
+<itemizedlist>
+<listitem>
+ <para>The device has memory that can be mapped. The device can be
+ controlled completely by writing to this memory.</para>
+</listitem>
+<listitem>
+ <para>The device usually generates interrupts.</para>
+</listitem>
+<listitem>
+ <para>The device does not fit into one of the standard kernel
+ subsystems.</para>
+</listitem>
+</itemizedlist>
</sect1>
<sect1 id="thanks">
For cards that don't generate interrupts but need to be
polled, there is the possibility to set up a timer that
triggers the interrupt handler at configurable time intervals.
- See <filename>drivers/uio/uio_dummy.c</filename> for an
- example of this technique.
+ This interrupt simulation is done by calling
+ <function>uio_event_notify()</function>
+ from the timer's event handler.
</para>
<para>
</sect1>
</chapter>
-<chapter id="using-uio_dummy" xreflabel="Using uio_dummy">
-<?dbhtml filename="using-uio_dummy.html"?>
-<title>Using uio_dummy</title>
- <para>
- Well, there is no real use for uio_dummy. Its only purpose is
- to test most parts of the UIO system (everything except
- hardware interrupts), and to serve as an example for the
- kernel module that you will have to write yourself.
- </para>
-
-<sect1 id="what_uio_dummy_does">
-<title>What uio_dummy does</title>
- <para>
- The kernel module <filename>uio_dummy.ko</filename> creates a
- device that uses a timer to generate periodic interrupts. The
- interrupt handler does nothing but increment a counter. The
- driver adds two custom attributes, <varname>count</varname>
- and <varname>freq</varname>, that appear under
- <filename>/sys/devices/platform/uio_dummy/</filename>.
- </para>
-
- <para>
- The attribute <varname>count</varname> can be read and
- written. The associated file
- <filename>/sys/devices/platform/uio_dummy/count</filename>
- appears as a normal text file and contains the total number of
- timer interrupts. If you look at it (e.g. using
- <function>cat</function>), you'll notice it is slowly counting
- up.
- </para>
-
- <para>
- The attribute <varname>freq</varname> can be read and written.
- The content of
- <filename>/sys/devices/platform/uio_dummy/freq</filename>
- represents the number of system timer ticks between two timer
- interrupts. The default value of <varname>freq</varname> is
- the value of the kernel variable <varname>HZ</varname>, which
- gives you an interval of one second. Lower values will
- increase the frequency. Try the following:
- </para>
-<programlisting format="linespecific">
-cd /sys/devices/platform/uio_dummy/
-echo 100 > freq
-</programlisting>
- <para>
- Use <function>cat count</function> to see how the interrupt
- frequency changes.
- </para>
-</sect1>
-</chapter>
-
<chapter id="custom_kernel_module" xreflabel="Writing your own kernel module">
<?dbhtml filename="custom_kernel_module.html"?>
<title>Writing your own kernel module</title>
<para>
- Please have a look at <filename>uio_dummy.c</filename> as an
+ Please have a look at <filename>uio_cif.c</filename> as an
example. The following paragraphs explain the different
sections of this file.
</para>
interrupt, it's your modules task to determine the irq number during
initialization. If you don't have a hardware generated interrupt but
want to trigger the interrupt handler in some other way, set
-<varname>irq</varname> to <varname>UIO_IRQ_CUSTOM</varname>. The
-uio_dummy module does this as it triggers the event mechanism in a timer
-routine. If you had no interrupt at all, you could set
+<varname>irq</varname> to <varname>UIO_IRQ_CUSTOM</varname>.
+If you had no interrupt at all, you could set
<varname>irq</varname> to <varname>UIO_IRQ_NONE</varname>, though this
rarely makes sense.
</para></listitem>
-This is an explanation of what i2c is, and what is supported in this package.
-
I2C and SMBus
=============
Client
An Algorithm driver contains general code that can be used for a whole class
-of I2C adapters. Each specific adapter driver depends on one algorithm
-driver.
+of I2C adapters. Each specific adapter driver either depends on one algorithm
+driver, or includes its own implementation.
A Driver driver (yes, this sounds ridiculous, sorry) contains the general
code to access some type of device. Each detected device gets its own
data in the Client structure. Usually, Driver and Client are more closely
integrated than Algorithm and Adapter.
-For a given configuration, you will need a driver for your I2C bus (usually
-a separate Adapter and Algorithm driver), and drivers for your I2C devices
-(usually one driver for each device). There are no I2C device drivers
-in this package. See the lm_sensors project http://www.lm-sensors.nu
-for device drivers.
+For a given configuration, you will need a driver for your I2C bus, and
+drivers for your I2C devices (usually one driver for each device).
At this time, Linux only operates I2C (or SMBus) in master mode; you can't
use these APIs to make a Linux system behave as a slave/device, either to
speak a custom protocol or to emulate some other device.
-
-
-Included Bus Drivers
-====================
-Note that only stable drivers are patched into the kernel by 'mkpatch'.
-
-
-Base modules
-------------
-
-i2c-core: The basic I2C code, including the /proc/bus/i2c* interface
-i2c-dev: The /dev/i2c-* interface
-i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers
-
-Algorithm drivers
------------------
-
-i2c-algo-bit: A bit-banging algorithm
-i2c-algo-pcf: A PCF 8584 style algorithm
-i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT)
-
-Adapter drivers
----------------
-
-i2c-elektor: Elektor ISA card (uses i2c-algo-pcf)
-i2c-elv: ELV parallel port adapter (uses i2c-algo-bit)
-i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatched)
-i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit)
-i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT)
-i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit)
-i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
-
/ getpagesize();
p = get_pages(pages);
+ /* Initialize the virtqueue */
+ vq->next = NULL;
+ vq->last_avail_idx = 0;
+ vq->dev = dev;
+
/* Initialize the configuration. */
vq->config.num = num_descs;
vq->config.irq = devices.next_irq++;
for (i = &dev->vq; *i; i = &(*i)->next);
*i = vq;
- /* Link virtqueue back to device. */
- vq->dev = dev;
-
/* Set the routine to call when the Guest does something to this
* virtqueue. */
vq->handle_output = handle_output;
dev->desc = new_dev_desc(type);
dev->handle_input = handle_input;
dev->name = name;
+ dev->vq = NULL;
return dev;
}
--- /dev/null
+ Namespaces compatibility list
+
+This document contains the information about the problems user
+may have when creating tasks living in different namespaces.
+
+Here's the summary. This matrix shows the known problems, that
+occur when tasks share some namespace (the columns) while living
+in different other namespaces (the rows):
+
+ UTS IPC VFS PID User Net
+UTS X
+IPC X 1
+VFS X
+PID 1 1 X
+User 2 2 X
+Net X
+
+1. Both the IPC and the PID namespaces provide IDs to address
+ object inside the kernel. E.g. semaphore with IPCID or
+ process group with pid.
+
+ In both cases, tasks shouldn't try exposing this ID to some
+ other task living in a different namespace via a shared filesystem
+ or IPC shmem/message. The fact is that this ID is only valid
+ within the namespace it was obtained in and may refer to some
+ other object in another namespace.
+
+2. Intentionally, two equal user IDs in different user namespaces
+ should not be equal from the VFS point of view. In other
+ words, user 10 in one user namespace shouldn't have the same
+ access permissions to files, belonging to user 10 in another
+ namespace.
+
+ The same is true for the IPC namespaces being shared - two users
+ from different user namespaces should not access the same IPC objects
+ even having equal UIDs.
+
+ But currently this is not so.
+
This algorithm is 802.3ad compliant.
+ layer2+3
+
+ This policy uses a combination of layer2 and layer3
+ protocol information to generate the hash.
+
+ Uses XOR of hardware MAC addresses and IP addresses to
+ generate the hash. The formula is
+
+ (((source IP XOR dest IP) AND 0xffff) XOR
+ ( source MAC XOR destination MAC ))
+ modulo slave count
+
+ This algorithm will place all traffic to a particular
+ network peer on the same slave. For non-IP traffic,
+ the formula is the same as for the layer2 transmit
+ hash policy.
+
+ This policy is intended to provide a more balanced
+ distribution of traffic than layer2 alone, especially
+ in environments where a layer3 gateway device is
+ required to reach most destinations.
+
+ This algorithm is 802.3ad complient.
+
layer3+4
This policy uses upper layer protocol information,
or may not tolerate this noncompliance.
The default value is layer2. This option was added in bonding
-version 2.6.3. In earlier versions of bonding, this parameter does
-not exist, and the layer2 policy is the only policy.
+ version 2.6.3. In earlier versions of bonding, this parameter
+ does not exist, and the layer2 policy is the only policy. The
+ layer2+3 value was added for bonding version 3.2.2.
3. Configuring Bonding Devices
('port'). Once you have done that, you will be able to use
parport_claim and parport_release in order to use the port.
+The ('name') argument is the name of the device that appears in /proc
+filesystem. The string must be valid for the whole lifetime of the
+device (until parport_unregister_device is called).
+
This function will register three callbacks into your driver:
'preempt', 'wakeup' and 'irq'. Each of these may be NULL in order to
indicate that you do not want a callback.
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
- i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
- or "rtbi".
+ i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
+ Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
+ "tbi", or "rtbi".
Example:
ucc@2000 {
ThinkPad ACPI Extras Driver
- Version 0.16
- August 2nd, 2007
+ Version 0.17
+ October 04th, 2007
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
This feature allows software control of the LCD brightness on ThinkPad
models which don't have a hardware brightness slider.
-It has some limitations: the LCD backlight cannot be actually turned on or off
-by this interface, and in many ThinkPad models, the "dim while on battery"
-functionality will be enabled by the BIOS when this interface is used, and
-cannot be controlled.
-
-The backlight control has eight levels, ranging from 0 to 7. Some of the
-levels may not be distinct.
-
-There are two interfaces to the firmware for brightness control, EC and CMOS.
-To select which one should be used, use the brightness_mode module parameter:
-brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode,
-brightness_mode=3 selects both EC and CMOS. The driver tries to autodetect
-which interface to use.
+It has some limitations: the LCD backlight cannot be actually turned on or
+off by this interface, and in many ThinkPad models, the "dim while on
+battery" functionality will be enabled by the BIOS when this interface is
+used, and cannot be controlled.
+
+On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
+has eight brightness levels, ranging from 0 to 7. Some of the levels
+may not be distinct. Later Lenovo models that implement the ACPI
+display backlight brightness control methods have 16 levels, ranging
+from 0 to 15.
+
+There are two interfaces to the firmware for direct brightness control,
+EC and CMOS. To select which one should be used, use the
+brightness_mode module parameter: brightness_mode=1 selects EC mode,
+brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
+and CMOS. The driver tries to autodetect which interface to use.
+
+When display backlight brightness controls are available through the
+standard ACPI interface, it is best to use it instead of this direct
+ThinkPad-specific interface. The driver will disable its native
+backlight brightness control interface if it detects that the standard
+ACPI interface is available in the ThinkPad.
+
+The brightness_enable module parameter can be used to control whether
+the LCD brightness control feature will be enabled when available.
+brightness_enable=0 forces it to be disabled. brightness_enable=1
+forces it to be enabled when available, even if the standard ACPI
+interface is also available.
Procfs notes:
Sysfs notes:
-The interface is implemented through the backlight sysfs class, which is poorly
-documented at this time.
+The interface is implemented through the backlight sysfs class, which is
+poorly documented at this time.
-Locate the thinkpad_screen device under /sys/class/backlight, and inside it
-there will be the following attributes:
+Locate the thinkpad_screen device under /sys/class/backlight, and inside
+it there will be the following attributes:
max_brightness:
Reads the maximum brightness the hardware can be set to.
Reads what brightness the screen is set to at this instant.
brightness:
- Writes request the driver to change brightness to the given
- value. Reads will tell you what brightness the driver is trying
- to set the display to when "power" is set to zero and the display
- has not been dimmed by a kernel power management event.
+ Writes request the driver to change brightness to the
+ given value. Reads will tell you what brightness the
+ driver is trying to set the display to when "power" is set
+ to zero and the display has not been dimmed by a kernel
+ power management event.
power:
- power management mode, where 0 is "display on", and 1 to 3 will
- dim the display backlight to brightness level 0 because
- thinkpad-acpi cannot really turn the backlight off. Kernel
- power management events can temporarily increase the current
- power management level, i.e. they can dim the display.
+ power management mode, where 0 is "display on", and 1 to 3
+ will dim the display backlight to brightness level 0
+ because thinkpad-acpi cannot really turn the backlight
+ off. Kernel power management events can temporarily
+ increase the current power management level, i.e. they can
+ dim the display.
Volume control -- /proc/acpi/ibm/volume
tty->termios. Previous settings should be passed in
the "old" argument.
+ The API is defined such that the driver should return
+ the actual modes selected. This means that the
+ driver function is responsible for modifying any
+ bits in the request it cannot fulfill to indicate
+ the actual modes being used. A device with no
+ hardware capability for change (eg a USB dongle or
+ virtual port) can provide NULL for this method.
+
throttle() Notify the tty driver that input buffers for the
line discipline are close to full, and it should
somehow signal that no more characters should be
(although the interfaces will be in the same altsettings as
before the suspend).
+If the device is disconnected or powered down while it is suspended,
+the disconnect method will be called instead of the resume or
+reset_resume method. This is also quite likely to happen when
+waking up from hibernation, as many systems do not maintain suspend
+current to the USB host controllers during hibernation. (It's
+possible to work around the hibernation-forces-disconnect problem by
+using the USB Persist facility.)
+
The reset_resume method is used by the USB Persist facility (see
Documentation/usb/persist.txt) and it can also be used under certain
circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a
--- /dev/null
+General note on [U]EFI x86_64 support
+-------------------------------------
+
+The nomenclature EFI and UEFI are used interchangeably in this document.
+
+Although the tools below are _not_ needed for building the kernel,
+the needed bootloader support and associated tools for x86_64 platforms
+with EFI firmware and specifications are listed below.
+
+1. UEFI specification: http://www.uefi.org
+
+2. Booting Linux kernel on UEFI x86_64 platform requires bootloader
+ support. Elilo with x86_64 support can be used.
+
+3. x86_64 platform with EFI/UEFI firmware.
+
+Mechanics:
+---------
+- Build the kernel with the following configuration.
+ CONFIG_FB_EFI=y
+ CONFIG_FRAMEBUFFER_CONSOLE=y
+- Create a VFAT partition on the disk
+- Copy the following to the VFAT partition:
+ elilo bootloader with x86_64 support, elilo configuration file,
+ kernel image built in first step and corresponding
+ initrd. Instructions on building elilo and its dependencies
+ can be found in the elilo sourceforge project.
+- Boot to EFI shell and invoke elilo choosing the kernel image built
+ in first step.
P: Mike Phillips
M: mikep@linuxtr.net
L: netdev@vger.kernel.org
-L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
A2232 SERIAL BOARD DRIVER
P: Enver Haase
-M: ehaase@inf.fu-berlin.de
M: A2232@gmx.net
L: linux-m68k@lists.linux-m68k.org
S: Maintained
ALCATEL SPEEDTOUCH USB DRIVER
P: Duncan Sands
M: duncan.sands@free.fr
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
P: Lennert Buytenhek
M: kernel@wantstofly.org
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
FREESCALE HIGHSPEED USB DEVICE DRIVER
P: Li Yang
M: leoli@freescale.com
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
HARMONY SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
-W: http://www.parisc-linux.org/~kyle/harmony/
-L: parisc-linux@lists.parisc-linux.org
+L: linux-parisc@vger.kernel.org
S: Maintained
HAYES ESP SERIAL DRIVER
S: Maintained
IMS TWINTURBO FRAMEBUFFER DRIVER
-P: Paul Mundt
-M: lethal@chaoticdreams.org
L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
-S: Maintained
+S: Orphan
INFINIBAND SUBSYSTEM
P: Roland Dreier
IOC3 SERIAL DRIVER
P: Pat Gefre
M: pfg@sgi.com
-L: linux-kernel@linux-mips.org
+L: linux-mips@linux-mips.org
S: Maintained
IP MASQUERADING:
W: http://irda.sourceforge.net/
S: Maintained
+ISCSI
+P: Mike Christie
+M: michaelc@cs.wisc.edu
+L: open-iscsi@googlegroups.com
+W: www.open-iscsi.org
+T: git kernel.org:/pub/scm/linux/kernel/mnc/linux-2.6-iscsi.git
+S: Maintained
+
ISAPNP
P: Jaroslav Kysela
M: perex@perex.cz
KDUMP
P: Vivek Goyal
-M: vgoyal@in.ibm.com
+M: vgoyal@redhat.com
P: Haren Myneni
M: hbabu@us.ibm.com
L: kexec@lists.infradead.org
P: Joshua Thompson
M: funaho@jurai.org
W: http://www.mac.linux-m68k.org/
-L: linux-mac68k@mac.linux-m68k.org
+L: linux-m68k@lists.linux-m68k.org
S: Maintained
M68K ON HP9000/300
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
-MTRR AND SIMILAR SUPPORT [i386]
-P: Richard Gooch
-M: rgooch@atnf.csiro.au
-L: linux-kernel@vger.kernel.org
-W: http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
-S: Maintained
-
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: drzeus-mmc@drzeus.cx
P: Mike Phillips
M: mikep@linuxtr.net
L: netdev@vger.kernel.org
-L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
S: Maintained
PARISC ARCHITECTURE
+P: Kyle McMartin
+M: kyle@parisc-linux.org
P: Matthew Wilcox
M: matthew@wil.cx
P: Grant Grundler
M: grundler@parisc-linux.org
-P: Kyle McMartin
-M: kyle@parisc-linux.org
-L: parisc-linux@parisc-linux.org
+L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
-T: cvs cvs.parisc-linux.org:/var/cvs/linux-2.6
S: Maintained
PARAVIRT_OPS INTERFACE
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
-L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
+W: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
W: http://www.stradis.com/
S: Maintained
-SUPERH (sh)
-P: Paul Mundt
-M: lethal@linux-sh.org
-L: linuxsh-dev@lists.sourceforge.net (subscribers-only)
-W: http://www.linux-sh.org
-S: Maintained
-
-SUPERH64 (sh64)
+SUPERH
P: Paul Mundt
M: lethal@linux-sh.org
-L: linuxsh-shmedia-dev@lists.sourceforge.net
+L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
+T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
S: Maintained
SUN3/3X
TLAN NETWORK DRIVER
P: Samuel Chessman
M: chessman@tux.org
-L: tlan-devel@lists.sourceforge.net
+L: tlan-devel@lists.sourceforge.net (subscribers-only)
W: http://sourceforge.net/projects/tlan/
S: Maintained
P: Mike Phillips
M: mikep@linuxtr.net
L: netdev@vger.kernel.org
-L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
USB ACM DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-kernel@vger.kernel.org
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Supported
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB GADGET/PERIPHERAL SUBSYSTEM
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
-USB HUB DRIVER
-P: Johannes Erdfelt
-M: johannes@erdfelt.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
-
USB ISP116X DRIVER
P: Olav Kongas
M: ok@artecdesign.ee
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB KAWASAKI LSI DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB MASS STORAGE DRIVER
P: Matthew Dharm
M: mdharm-usb@one-eyed-alien.net
-L: linux-usb-users@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
M: smurf@smurf.noris.de
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB OV511 DRIVER
P: Mark McClelland
M: mmcclell@bigfoot.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
USB PEGASUS DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB PRINTER DRIVER (usblp)
P: Pete Zaitcev
M: zaitcev@redhat.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Supported
USB RTL8150 DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB SE401 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
P: Peter Berger and Al Borchers
M: pberger@brimson.com
M: alborchers@steinerpoint.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL DRIVER
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Supported
USB SERIAL BELKIN F5U103 DRIVER
P: William Greathouse
M: wgreathouse@smva.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL CYPRESS M8 DRIVER
P: Lonnie Mendez
M: dignome@gmail.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
-USB SERIAL CYBERJACK PINPAD/E-COM DRIVER
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
-
USB AUERSWALD DRIVER
P: Wolfgang Muees
M: wolfgang@iksw-muees.de
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL KEYSPAN DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
USB SERIAL WHITEHEAT DRIVER
P: Support Department
M: support@connecttech.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER
P: Alan Stern
M: stern@rowland.harvard.edu
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
S: Maintained
USB "USBNET" DRIVER FRAMEWORK
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
-L: linux-usb-devel@lists.sourceforge.net
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://royale.zerezo.com/zr364xx/
S: Maintained
USER-MODE LINUX
P: Jeff Dike
-M: jdike@karaya.com
+M: jdike@addtoit.com
L: user-mode-linux-devel@lists.sourceforge.net
L: user-mode-linux-user@lists.sourceforge.net
W: http://user-mode-linux.sourceforge.net
W: http://mjpeg.sourceforge.net/driver-zoran/
S: Maintained
-ZR36120 VIDEO FOR LINUX DRIVER
-P: Pauline Middelink
-M: middelin@polyware.nl
-W: http://www.polyware.nl/~middelin/En/hobbies.html
-W: http://www.polyware.nl/~middelin/hobbies.html
-S: Maintained
-
ZS DECSTATION Z85C30 SERIAL DRIVER
P: Maciej W. Rozycki
M: macro@linux-mips.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 24
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
NAME = Arr Matey! A Hairy Bilge Rat!
# *DOCUMENTATION*
PHONY := _all
_all:
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
-# Check that OUTPUT directory is not the same as where we have kernel src
-$(if $(filter-out $(KBUILD_OUTPUT),$(shell /bin/pwd)),, \
- $(error Output directory (O=...) specifies kernel src dir))
PHONY += $(MAKECMDGOALS) sub-make
-$(filter-out _all sub-make,$(MAKECMDGOALS)) _all: sub-make
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
$(Q)@:
sub-make: FORCE
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
-# We need some generic definitions.
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
include $(srctree)/scripts/Kbuild.include
# Make variables (CC, etc...)
PHONY += FORCE
FORCE:
-# Cancel implicit rules on top Makefile, `-rR' will apply to sub-makes.
-Makefile: ;
-
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
#include "proto.h"
EXPORT_SYMBOL(dma_alloc_coherent);
int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
enum dma_data_direction direction)
{
int i;
+ struct scatterlist *sg;
- for (i = 0; i < nents; i++ ) {
+ for_each_sg(sgl, sg, nents, i) {
void *va;
- BUG_ON(!sg[i].page);
- va = page_address(sg[i].page) + sg[i].offset;
- sg_dma_address(sg + i) = (dma_addr_t)virt_to_bus(va);
- sg_dma_len(sg + i) = sg[i].length;
+ BUG_ON(!sg_page(sg));
+ va = sg_virt(sg);
+ sg_dma_address(sg) = (dma_addr_t)virt_to_bus(va);
+ sg_dma_len(sg) = sg->length;
}
return nents;
u8 *ucode;
int i;
- gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL);
- gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL);
+ gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL);
+ gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL);
ucode = kmalloc(513 * 5, GFP_KERNEL);
if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
kfree(ucode);
if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
per_ctx_regs = 32;
- memset(gpr_a, 0, sizeof(gpr_a));
- memset(gpr_b, 0, sizeof(gpr_b));
for (i = 0; i < 256; i++) {
struct ixp2000_reg_value *r = c->initial_reg_values + i;
u32 *bank;
str r1, [sp] @ save the "real" r0 copied
@ from the exception stack
-#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-#ifndef CONFIG_MMU
-#warning "NPTL on non MMU needs fixing"
-#else
- @ make sure our user space atomic helper is aborted
- cmp r2, #TASK_SIZE
- bichs r3, r3, #PSR_Z_BIT
-#endif
-#endif
-
@
@ We are now ready to fill in the remaining blanks on the stack:
@
zero_fp
.endm
+ .macro kuser_cmpxchg_check
+#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#ifndef CONFIG_MMU
+#warning "NPTL on non MMU needs fixing"
+#else
+ @ Make sure our user space atomic helper is restarted
+ @ if it was interrupted in a critical region. Here we
+ @ perform a quick test inline since it should be false
+ @ 99.9999% of the time. The rest is done out of line.
+ cmp r2, #TASK_SIZE
+ blhs kuser_cmpxchg_fixup
+#endif
+#endif
+ .endm
+
.align 5
__dabt_usr:
usr_entry
+ kuser_cmpxchg_check
@
@ Call the processor-specific abort handler:
.align 5
__irq_usr:
usr_entry
+ kuser_cmpxchg_check
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
@
@ r0 - instruction
@
-1: ldrt r0, [r4]
adr r9, ret_from_exception
adr lr, __und_usr_unknown
+1: ldrt r0, [r4]
@
@ fallthrough to call_fpe
@
*
* Clobbered:
*
- * the Z flag might be lost
+ * none
*
* Definition and user space usage example:
*
*
* - This routine already includes memory barriers as needed.
*
- * - A failure might be transient, i.e. it is possible, although unlikely,
- * that "failure" be returned even if *ptr == oldval.
- *
* For example, a user space atomic_add implementation could look like this:
*
* #define atomic_add(ptr, val) \
#elif __LINUX_ARM_ARCH__ < 6
+#ifdef CONFIG_MMU
+
/*
- * Theory of operation:
- *
- * We set the Z flag before loading oldval. If ever an exception
- * occurs we can not be sure the loaded value will still be the same
- * when the exception returns, therefore the user exception handler
- * will clear the Z flag whenever the interrupted user code was
- * actually from the kernel address space (see the usr_entry macro).
- *
- * The post-increment on the str is used to prevent a race with an
- * exception happening just after the str instruction which would
- * clear the Z flag although the exchange was done.
+ * The only thing that can break atomicity in this cmpxchg
+ * implementation is either an IRQ or a data abort exception
+ * causing another process/thread to be scheduled in the middle
+ * of the critical sequence. To prevent this, code is added to
+ * the IRQ and data abort exception handlers to set the pc back
+ * to the beginning of the critical section if it is found to be
+ * within that critical section (see kuser_cmpxchg_fixup).
*/
-#ifdef CONFIG_MMU
- teq ip, ip @ set Z flag
- ldr ip, [r2] @ load current val
- add r3, r2, #1 @ prepare store ptr
- teqeq ip, r0 @ compare with oldval if still allowed
- streq r1, [r3, #-1]! @ store newval if still allowed
- subs r0, r2, r3 @ if r2 == r3 the str occured
+1: ldr r3, [r2] @ load current val
+ subs r3, r3, r0 @ compare with oldval
+2: streq r1, [r2] @ store newval if eq
+ rsbs r0, r3, #0 @ set return val and C flag
+ usr_ret lr
+
+ .text
+kuser_cmpxchg_fixup:
+ @ Called from kuser_cmpxchg_check macro.
+ @ r2 = address of interrupted insn (must be preserved).
+ @ sp = saved regs. r7 and r8 are clobbered.
+ @ 1b = first critical insn, 2b = last critical insn.
+ @ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b.
+ mov r7, #0xffff0fff
+ sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
+ subs r8, r2, r7
+ rsbcss r8, r8, #(2b - 1b)
+ strcs r7, [sp, #S_PC]
+ mov pc, lr
+ .previous
+
#else
#warning "NPTL on non MMU needs fixing"
mov r0, #-1
adds r0, r0, #0
-#endif
usr_ret lr
+#endif
#else
#ifdef CONFIG_SMP
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
- ldrex r3, [r2]
+1: ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]
+ teqeq r3, #1
+ beq 1b
rsbs r0, r3, #0
+ /* beware -- each __kuser slot must be 8 instructions max */
#ifdef CONFIG_SMP
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ b __kuser_memory_barrier
+#else
usr_ret lr
+#endif
#endif
*
* Clobbered:
*
- * the Z flag might be lost
+ * none
*
* Definition and user space usage example:
*
if ((instr & hook->instr_mask) == hook->instr_val &&
(regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
if (hook->fn(regs, instr) == 0) {
- spin_unlock_irq(&undef_lock);
+ spin_unlock_irqrestore(&undef_lock, flags);
return;
}
}
* existence. Don't ever use this from user code.
*/
case 0xfff0:
- {
+ for (;;) {
extern void do_DataAbort(unsigned long addr, unsigned int fsr,
struct pt_regs *regs);
unsigned long val;
up_read(&mm->mmap_sem);
/* simulate a write access fault */
do_DataAbort(addr, 15 + (1 << 11), regs);
- return -1;
}
#endif
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA25,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA26,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91rm9200_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA25, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA25, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA26, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA26, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91rm9200_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA26, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91rm9200_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA23,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA24,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9260_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9260_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA24, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9260_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA7,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA8,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9261_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9261_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA8, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9261_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PB4,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB5,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9263_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9263_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PB5, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9263_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
#include <asm/mach/map.h>
#include <linux/platform_device.h>
-#include <linux/fb.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA23,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA24,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9rl_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9rl_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA24, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9rl_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
/* USB Device */
at91_add_device_udc(&carmeva_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
/* Compact Flash */
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
};
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
- { I2C_BOARD_INFO("rtc-ds1307", 0x68),
- .type = "ds1307",
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0x68),
+ .type = "ds1307",
},
};
-
static struct at91_cf_data __initdata csb337_cf_data = {
/*
* connector P4 on the CSB 337 mates to
/* USB Device */
at91_add_device_udc(&csb337_udc_data);
/* I2C */
- at91_add_device_i2c();
- i2c_register_board_info(0, csb337_i2c_devices,
- ARRAY_SIZE(csb337_i2c_devices));
+ at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
/* Compact Flash */
at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
at91_add_device_cf(&csb337_cf_data);
/* USB Device */
at91_add_device_udc(&csb637_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NOR flash */
#endif
};
+static struct i2c_board_info __initdata dk_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("x9429", 0x28),
+ },
+ {
+ I2C_BOARD_INFO("at24c", 0x50),
+ .type = "24c1024",
+ }
+};
+
static struct mtd_partition __initdata dk_nand_partition[] = {
{
.name = "NAND Partition 1",
/* Compact Flash */
at91_add_device_cf(&dk_cf_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
/* SPI */
at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
.wire4 = 1,
};
+static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24c", 0x50),
+ .type = "24c512",
+ },
+};
+
+
static void __init eb9200_board_init(void)
{
/* Serial */
/* USB Device */
at91_add_device_udc(&eb9200_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
/* Compact Flash */
at91_add_device_cf(&eb9200_cf_data);
/* SPI */
at91_add_device_udc(&ek_udc_data);
at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* USB Device */
at91_add_device_udc(&kafa_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
}
/* MMC */
at91_add_device_mmc(0, &kb9202_mmc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NAND */
// at91_add_device_udc(&picotux200_udc_data);
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
static void __init ek_add_device_buttons(void)
{
- at91_set_gpio_input(AT91_PIN_PB27, 0); /* btn0 */
- at91_set_deglitch(AT91_PIN_PB27, 1);
- at91_set_gpio_input(AT91_PIN_PB26, 0); /* btn1 */
- at91_set_deglitch(AT91_PIN_PB26, 1);
- at91_set_gpio_input(AT91_PIN_PB25, 0); /* btn2 */
- at91_set_deglitch(AT91_PIN_PB25, 1);
- at91_set_gpio_input(AT91_PIN_PB24, 0); /* btn3 */
- at91_set_deglitch(AT91_PIN_PB24, 1);
+ at91_set_gpio_input(AT91_PIN_PA27, 0); /* btn0 */
+ at91_set_deglitch(AT91_PIN_PA27, 1);
+ at91_set_gpio_input(AT91_PIN_PA26, 0); /* btn1 */
+ at91_set_deglitch(AT91_PIN_PA26, 1);
+ at91_set_gpio_input(AT91_PIN_PA25, 0); /* btn2 */
+ at91_set_deglitch(AT91_PIN_PA25, 1);
+ at91_set_gpio_input(AT91_PIN_PA24, 0); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA24, 1);
platform_device_register(&ek_button_device);
}
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* DM9000 ethernet */
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
/* Serial */
at91_add_device_serial();
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* SPI */
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
clk->parent = parent;
- clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+ clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2));
}
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
mckr = at91_sys_read(AT91_PMC_MCKR);
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
- freq /= (1 << ((mckr >> 2) & 3)); /* prescale */
- mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */
+ freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
+ if (cpu_is_at91rm9200())
+ mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ else
+ mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
*
*/
-#define INTENNUM_OFF 0x8
-#define INTDISNUM_OFF 0xC
+#define INTCNTL_OFF 0x00
+#define NIMASK_OFF 0x04
+#define INTENNUM_OFF 0x08
+#define INTDISNUM_OFF 0x0C
+#define INTENABLEH_OFF 0x10
+#define INTENABLEL_OFF 0x14
+#define INTTYPEH_OFF 0x18
+#define INTTYPEL_OFF 0x1C
+#define NIPRIORITY_OFF(x) (0x20+4*(7-(x)))
+#define NIVECSR_OFF 0x40
+#define FIVECSR_OFF 0x44
+#define INTSRCH_OFF 0x48
+#define INTSRCL_OFF 0x4C
+#define INTFRCH_OFF 0x50
+#define INTFRCL_OFF 0x54
+#define NIPNDH_OFF 0x58
+#define NIPNDL_OFF 0x5C
+#define FIPNDH_OFF 0x60
+#define FIPNDL_OFF 0x64
#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
+#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF)
+#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF)
#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF)
+#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
+#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF)
+#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF)
+#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF)
+#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF)
+#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x))
+#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF)
+#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF)
+#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF)
+#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF)
+#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF)
+#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF)
+#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF)
+#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF)
+#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF)
+#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF)
#if 0
#define DEBUG_IRQ(fmt...) printk(fmt)
DEBUG_IRQ("Initializing imx interrupts\n");
- /* Mask all interrupts initially */
+ /* Disable all interrupts initially. */
+ /* Do not rely on the bootloader. */
+ __raw_writel(0, IMX_AITC_INTENABLEH);
+ __raw_writel(0, IMX_AITC_INTENABLEL);
+
+ /* Mask all GPIO interrupts as well */
IMR(0) = 0;
IMR(1) = 0;
IMR(2) = 0;
set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
- /* Disable all interrupts initially. */
- /* In IMX this is done in the bootloader. */
+ /* Release masking of interrupts according to priority */
+ __raw_writel(-1, IMX_AITC_NIMASK);
}
INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev),
INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
- INIT_CKEN("USBCLK", USB, 48000000, 0, &pxa27x_device_ohci.dev),
+ INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
- MFP_ADDR_X(GPIO5, GPIO26, 0x028C),
- MFP_ADDR_X(GPIO27, GPIO62, 0x0400),
+ MFP_ADDR_X(GPIO5, GPIO9, 0x028C),
+ MFP_ADDR(GPIO10, 0x0458),
+ MFP_ADDR_X(GPIO11, GPIO26, 0x02A0),
+ MFP_ADDR_X(GPIO27, GPIO48, 0x0400),
+ MFP_ADDR_X(GPIO49, GPIO62, 0x045C),
MFP_ADDR_X(GPIO63, GPIO73, 0x04B4),
MFP_ADDR_X(GPIO74, GPIO98, 0x04F0),
MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
printk(KERN_WARNING "SSP: tried to close invalid port\n");
+ mutex_unlock(&mutex);
return;
}
mainmenu "Linux Kernel Configuration"
config AVR32
- bool
- default y
+ def_bool y
# With EMBEDDED=n, we get lots of stuff automatically selected
# that we usually don't need on AVR32.
select EMBEDDED
http://avr32linux.org/.
config GENERIC_GPIO
- bool
- default y
+ def_bool y
config GENERIC_HARDIRQS
- bool
- default y
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
config HARDIRQS_SW_RESEND
- bool
- default y
+ def_bool y
config GENERIC_IRQ_PROBE
- bool
- default y
+ def_bool y
config RWSEM_GENERIC_SPINLOCK
- bool
- default y
+ def_bool y
config GENERIC_TIME
- bool
- default y
+ def_bool y
config RWSEM_XCHGADD_ALGORITHM
- bool
+ def_bool n
config ARCH_HAS_ILOG2_U32
- bool
- default n
+ def_bool n
config ARCH_HAS_ILOG2_U64
- bool
- default n
+ def_bool n
config GENERIC_HWEIGHT
- bool
- default y
+ def_bool y
config GENERIC_CALIBRATE_DELAY
- bool
- default y
+ def_bool y
config GENERIC_BUG
- bool
- default y
+ def_bool y
depends on BUG
source "init/Kconfig"
source "kernel/Kconfig.preempt"
config HAVE_ARCH_BOOTMEM_NODE
- bool
- default n
+ def_bool n
config ARCH_HAVE_MEMORY_PRESENT
- bool
- default n
+ def_bool n
config NEED_NODE_MEMMAP_SIZE
- bool
- default n
+ def_bool n
config ARCH_FLATMEM_ENABLE
- bool
- default y
+ def_bool y
config ARCH_DISCONTIGMEM_ENABLE
- bool
- default n
+ def_bool n
config ARCH_SPARSEMEM_ENABLE
- bool
- default n
+ def_bool n
source "mm/Kconfig"
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
OFFSET(TI_flags, thread_info, flags);
OFFSET(TI_cpu, thread_info, cpu);
OFFSET(TI_preempt_count, thread_info, preempt_count);
+ OFFSET(TI_rar_saved, thread_info, rar_saved);
+ OFFSET(TI_rsr_saved, thread_info, rsr_saved);
OFFSET(TI_restart_block, thread_info, restart_block);
}
3: bld r1, TIF_BREAKPOINT
brcc syscall_exit_cont
- mfsr r3, SYSREG_TLBEHI
- lddsp r2, sp[REG_PC]
- andl r3, 0xff, COH
- lsl r3, 1
- sbr r3, 30
- sbr r3, 0
- mtdr DBGREG_BWA2A, r2
- mtdr DBGREG_BWC2A, r3
- rjmp syscall_exit_cont
-
+ rjmp enter_monitor_mode
/* The slow path of the TLB miss handler */
page_table_not_present:
rjmp ret_from_exception
/* This function expects to find offending PC in SYSREG_RAR_EX */
+ .type save_full_context_ex, @function
+ .align 2
save_full_context_ex:
+ mfsr r11, SYSREG_RAR_EX
+ sub r9, pc, . - debug_trampoline
mfsr r8, SYSREG_RSR_EX
+ cp.w r9, r11
+ breq 3f
mov r12, r8
andh r8, (MODE_MASK >> 16), COH
- mfsr r11, SYSREG_RAR_EX
brne 2f
1: pushm r11, r12 /* PC and SR */
stdsp sp[4], r10 /* replace saved SP */
rjmp 1b
+ /*
+ * The debug handler set up a trampoline to make us
+ * automatically enter monitor mode upon return, but since
+ * we're saving the full context, we must assume that the
+ * exception handler might want to alter the return address
+ * and/or status register. So we need to restore the original
+ * context and enter monitor mode manually after the exception
+ * has been handled.
+ */
+3: get_thread_info r8
+ ld.w r11, r8[TI_rar_saved]
+ ld.w r12, r8[TI_rsr_saved]
+ rjmp 1b
+ .size save_full_context_ex, . - save_full_context_ex
+
/* Low-level exception handlers */
handle_critical:
- pushm r12
- pushm r0-r12
+ sub sp, 4
+ stmts --sp, r0-lr
rcall save_full_context_ex
mfsr r12, SYSREG_ECR
mov r11, sp
ret_from_exception:
mask_interrupts
lddsp r4, sp[REG_SR]
+
andh r4, (MODE_MASK >> 16), COH
brne fault_resume_kernel
2: bld r1, TIF_BREAKPOINT
brcc fault_resume_user
- mfsr r3, SYSREG_TLBEHI
- lddsp r2, sp[REG_PC]
- andl r3, 0xff, COH
- lsl r3, 1
- sbr r3, 30
- sbr r3, 0
- mtdr DBGREG_BWA2A, r2
- mtdr DBGREG_BWC2A, r3
- rjmp fault_resume_user
-
- /* If we get a debug trap from privileged context we end up here */
-handle_debug_priv:
- /* Fix up LR and SP in regs. r11 contains the mode we came from */
+ rjmp enter_monitor_mode
+
+ .section .kprobes.text, "ax", @progbits
+ .type handle_debug, @function
+handle_debug:
+ sub sp, 4 /* r12_orig */
+ stmts --sp, r0-lr
+ mfsr r8, SYSREG_RAR_DBG
+ mfsr r9, SYSREG_RSR_DBG
+ unmask_exceptions
+ pushm r8-r9
+ bfextu r9, r9, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
+ brne debug_fixup_regs
+
+.Ldebug_fixup_cont:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ rcall trace_hardirqs_off
+#endif
+ mov r12, sp
+ rcall do_debug
+ mov sp, r12
+
+ lddsp r2, sp[REG_SR]
+ bfextu r3, r2, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
+ brne debug_resume_kernel
+
+ get_thread_info r0
+ ld.w r1, r0[TI_flags]
+ mov r2, _TIF_DBGWORK_MASK
+ tst r1, r2
+ brne debug_exit_work
+
+ bld r1, TIF_SINGLE_STEP
+ brcc 1f
+ mfdr r4, OCD_DC
+ sbr r4, OCD_DC_SS_BIT
+ mtdr OCD_DC, r4
+
+1: popm r10,r11
+ mask_exceptions
+ mtsr SYSREG_RSR_DBG, r11
+ mtsr SYSREG_RAR_DBG, r10
+#ifdef CONFIG_TRACE_IRQFLAGS
+ rcall trace_hardirqs_on
+1:
+#endif
+ ldmts sp++, r0-lr
+ sub sp, -4
+ retd
+ .size handle_debug, . - handle_debug
+
+ /* Mode of the trapped context is in r9 */
+ .type debug_fixup_regs, @function
+debug_fixup_regs:
mfsr r8, SYSREG_SR
- mov r9, r8
- andh r8, hi(~MODE_MASK)
- or r8, r11
+ mov r10, r8
+ bfins r8, r9, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
mtsr SYSREG_SR, r8
sub pc, -2
stdsp sp[REG_LR], lr
- mtsr SYSREG_SR, r9
+ mtsr SYSREG_SR, r10
sub pc, -2
- sub r10, sp, -FRAME_SIZE_FULL
- stdsp sp[REG_SP], r10
- mov r12, sp
- rcall do_debug_priv
+ sub r8, sp, -FRAME_SIZE_FULL
+ stdsp sp[REG_SP], r8
+ rjmp .Ldebug_fixup_cont
+ .size debug_fixup_regs, . - debug_fixup_regs
- /* Now, put everything back */
- ssrf SR_EM_BIT
+ .type debug_resume_kernel, @function
+debug_resume_kernel:
+ mask_exceptions
popm r10, r11
mtsr SYSREG_RAR_DBG, r10
mtsr SYSREG_RSR_DBG, r11
- mfsr r8, SYSREG_SR
- mov r9, r8
- andh r8, hi(~MODE_MASK)
- andh r11, hi(MODE_MASK)
- or r8, r11
- mtsr SYSREG_SR, r8
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bld r11, SYSREG_GM_OFFSET
+ brcc 1f
+ rcall trace_hardirqs_on
+1:
+#endif
+ mfsr r2, SYSREG_SR
+ mov r1, r2
+ bfins r2, r3, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
+ mtsr SYSREG_SR, r2
sub pc, -2
popm lr
- mtsr SYSREG_SR, r9
+ mtsr SYSREG_SR, r1
sub pc, -2
sub sp, -4 /* skip SP */
popm r0-r12
sub sp, -4
retd
+ .size debug_resume_kernel, . - debug_resume_kernel
+ .type debug_exit_work, @function
+debug_exit_work:
/*
- * At this point, everything is masked, that is, interrupts,
- * exceptions and debugging traps. We might get called from
- * interrupt or exception context in some rare cases, but this
- * will be taken care of by do_debug(), so we're not going to
- * do a 100% correct context save here.
+ * We must return from Monitor Mode using a retd, and we must
+ * not schedule since that involves the D bit in SR getting
+ * cleared by something other than the debug hardware. This
+ * may cause undefined behaviour according to the Architecture
+ * manual.
+ *
+ * So we fix up the return address and status and return to a
+ * stub below in Exception mode. From there, we can follow the
+ * normal exception return path.
+ *
+ * The real return address and status registers are stored on
+ * the stack in the way the exception return path understands,
+ * so no need to fix anything up there.
*/
-handle_debug:
- sub sp, 4 /* r12_orig */
- stmts --sp, r0-lr
- mfsr r10, SYSREG_RAR_DBG
- mfsr r11, SYSREG_RSR_DBG
- unmask_exceptions
- pushm r10,r11
- andh r11, (MODE_MASK >> 16), COH
- brne handle_debug_priv
-
- mov r12, sp
- rcall do_debug
-
- lddsp r10, sp[REG_SR]
- andh r10, (MODE_MASK >> 16), COH
- breq debug_resume_user
-
-debug_restore_all:
- popm r10,r11
- mask_exceptions
- mtsr SYSREG_RSR_DBG, r11
- mtsr SYSREG_RAR_DBG, r10
- ldmts sp++, r0-lr
- sub sp, -4
+ sub r8, pc, . - fault_exit_work
+ mtsr SYSREG_RAR_DBG, r8
+ mov r9, 0
+ orh r9, hi(SR_EM | SR_GM | MODE_EXCEPTION)
+ mtsr SYSREG_RSR_DBG, r9
+ sub pc, -2
retd
-
-debug_resume_user:
- get_thread_info r0
- mask_interrupts
-
- ld.w r1, r0[TI_flags]
- andl r1, _TIF_DBGWORK_MASK, COH
- breq debug_restore_all
-
-1: bld r1, TIF_NEED_RESCHED
- brcc 2f
- unmask_interrupts
- rcall schedule
- mask_interrupts
- ld.w r1, r0[TI_flags]
- rjmp 1b
-
-2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
- tst r1, r2
- breq 3f
- unmask_interrupts
- mov r12, sp
- mov r11, r0
- rcall do_notify_resume
- mask_interrupts
- ld.w r1, r0[TI_flags]
- rjmp 1b
-
-3: bld r1, TIF_SINGLE_STEP
- brcc debug_restore_all
- mfdr r2, DBGREG_DC
- sbr r2, DC_SS_BIT
- mtdr DBGREG_DC, r2
- rjmp debug_restore_all
+ .size debug_exit_work, . - debug_exit_work
.set rsr_int0, SYSREG_RSR_INT0
.set rsr_int1, SYSREG_RSR_INT1
andl r1, _TIF_WORK_MASK, COH
brne irq_exit_work
-1: popm r8-r9
+1:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ rcall trace_hardirqs_on
+#endif
+ popm r8-r9
mtsr rar_int\level, r8
mtsr rsr_int\level, r9
ldmts sp++,r0-lr
IRQ_LEVEL 1
IRQ_LEVEL 2
IRQ_LEVEL 3
+
+ .section .kprobes.text, "ax", @progbits
+ .type enter_monitor_mode, @function
+enter_monitor_mode:
+ /*
+ * We need to enter monitor mode to do a single step. The
+ * monitor code will alter the return address so that we
+ * return directly to the user instead of returning here.
+ */
+ breakpoint
+ rjmp breakpoint_failed
+
+ .size enter_monitor_mode, . - enter_monitor_mode
+
+ .type debug_trampoline, @function
+ .global debug_trampoline
+debug_trampoline:
+ /*
+ * Save the registers on the stack so that the monitor code
+ * can find them easily.
+ */
+ sub sp, 4 /* r12_orig */
+ stmts --sp, r0-lr
+ get_thread_info r0
+ ld.w r8, r0[TI_rar_saved]
+ ld.w r9, r0[TI_rsr_saved]
+ pushm r8-r9
+
+ /*
+ * The monitor code will alter the return address so we don't
+ * return here.
+ */
+ breakpoint
+ rjmp breakpoint_failed
+ .size debug_trampoline, . - debug_trampoline
+
+ .type breakpoint_failed, @function
+breakpoint_failed:
+ /*
+ * Something went wrong. Perhaps the debug hardware isn't
+ * enabled?
+ */
+ lda.w r12, msg_breakpoint_failed
+ mov r11, sp
+ mov r10, 9 /* SIGKILL */
+ call die
+1: rjmp 1b
+
+msg_breakpoint_failed:
+ .asciz "Failed to enter Debug Mode"
BUG_ON(!(sysreg_read(SR) & SYSREG_BIT(SR_D)));
- dc = __mfdr(DBGREG_DC);
- dc |= DC_SS;
- __mtdr(DBGREG_DC, dc);
+ dc = ocd_read(DC);
+ dc |= 1 << OCD_DC_SS_BIT;
+ ocd_write(DC, dc);
/*
* We must run the instruction from its original location
pr_debug("resuming execution at PC=%08lx\n", regs->pc);
- dc = __mfdr(DBGREG_DC);
- dc &= ~DC_SS;
- __mtdr(DBGREG_DC, dc);
+ dc = ocd_read(DC);
+ dc &= ~(1 << OCD_DC_SS_BIT);
+ ocd_write(DC, dc);
*p->addr = BREAKPOINT_INSTRUCTION;
flush_icache_range((unsigned long)p->addr,
int __init arch_init_kprobes(void)
{
printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
- __mtdr(DBGREG_DC, DC_MM | DC_DBE);
+ ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
/* TODO: Register kretprobe trampoline */
return 0;
void machine_restart(char *cmd)
{
- __mtdr(DBGREG_DC, DC_DBE);
- __mtdr(DBGREG_DC, DC_RES);
+ ocd_write(DC, (1 << OCD_DC_DBE_BIT));
+ ocd_write(DC, (1 << OCD_DC_RES_BIT));
while (1) ;
}
regs->sr & SR_N ? 'N' : 'n',
regs->sr & SR_Z ? 'Z' : 'z',
regs->sr & SR_C ? 'C' : 'c');
- printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
+ printk("%sMode bits: %c%c%c%c%c%c%c%c%c%c\n", log_lvl,
regs->sr & SR_H ? 'H' : 'h',
- regs->sr & SR_R ? 'R' : 'r',
regs->sr & SR_J ? 'J' : 'j',
+ regs->sr & SR_DM ? 'M' : 'm',
+ regs->sr & SR_D ? 'D' : 'd',
regs->sr & SR_EM ? 'E' : 'e',
regs->sr & SR_I3M ? '3' : '.',
regs->sr & SR_I2M ? '2' : '.',
static void ptrace_single_step(struct task_struct *tsk)
{
- pr_debug("ptrace_single_step: pid=%u, SR=0x%08lx\n",
- tsk->pid, tsk->thread.cpu_context.sr);
- if (!(tsk->thread.cpu_context.sr & SR_D)) {
- /*
- * Set a breakpoint at the current pc to force the
- * process into debug mode. The syscall/exception
- * exit code will set a breakpoint at the return
- * address when this flag is set.
- */
- pr_debug("ptrace_single_step: Setting TIF_BREAKPOINT\n");
- set_tsk_thread_flag(tsk, TIF_BREAKPOINT);
- }
+ pr_debug("ptrace_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
+ tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
- /* The monitor code will do the actual step for us */
+ /*
+ * We can't schedule in Debug mode, so when TIF_BREAKPOINT is
+ * set, the system call or exception handler will do a
+ * breakpoint to enter monitor mode before returning to
+ * userspace.
+ *
+ * The monitor code will then notice that TIF_SINGLE_STEP is
+ * set and return to userspace with single stepping enabled.
+ * The CPU will then enter monitor mode again after exactly
+ * one instruction has been executed, and the monitor code
+ * will then send a SIGTRAP to the process.
+ */
+ set_tsk_thread_flag(tsk, TIF_BREAKPOINT);
set_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
}
void ptrace_disable(struct task_struct *child)
{
clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
-}
-
-/*
- * Handle hitting a breakpoint
- */
-static void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
-{
- siginfo_t info;
-
- info.si_signo = SIGTRAP;
- info.si_errno = 0;
- info.si_code = TRAP_BRKPT;
- info.si_addr = (void __user *)instruction_pointer(regs);
-
- pr_debug("ptrace_break: Sending SIGTRAP to PID %u (pc = 0x%p)\n",
- tsk->pid, info.si_addr);
- force_sig_info(SIGTRAP, &info, tsk);
+ clear_tsk_thread_flag(child, TIF_BREAKPOINT);
}
/*
unsigned long *regs;
unsigned long value;
- pr_debug("ptrace_read_user(%p, %#lx, %p)\n",
- tsk, offset, data);
-
if (offset & 3 || offset >= sizeof(struct user)) {
printk("ptrace_read_user: invalid offset 0x%08lx\n", offset);
return -EIO;
if (offset < sizeof(struct pt_regs))
value = regs[offset / sizeof(regs[0])];
+ pr_debug("ptrace_read_user(%s[%u], %#lx, %p) -> %#lx\n",
+ tsk->comm, tsk->pid, offset, data, value);
+
return put_user(value, data);
}
{
unsigned long *regs;
+ pr_debug("ptrace_write_user(%s[%u], %#lx, %#lx)\n",
+ tsk->comm, tsk->pid, offset, value);
+
if (offset & 3 || offset >= sizeof(struct user)) {
- printk("ptrace_write_user: invalid offset 0x%08lx\n", offset);
+ pr_debug(" invalid offset 0x%08lx\n", offset);
return -EIO;
}
{
int ret;
- pr_debug("arch_ptrace(%ld, %d, %#lx, %#lx)\n",
- request, child->pid, addr, data);
-
pr_debug("ptrace: Enabling monitor mode...\n");
- __mtdr(DBGREG_DC, __mfdr(DBGREG_DC) | DC_MM | DC_DBE);
+ ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
+ | (1 << OCD_DC_DBE_BIT));
switch (request) {
/* Read the word at location addr in the child process */
break;
}
- pr_debug("sys_ptrace returning %d (DC = 0x%08lx)\n", ret, __mfdr(DBGREG_DC));
return ret;
}
asmlinkage void syscall_trace(void)
{
- pr_debug("syscall_trace called\n");
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return;
if (!(current->ptrace & PT_PTRACED))
return;
- pr_debug("syscall_trace: notifying parent\n");
/* The 0x80 provides a way for the tracing parent to
* distinguish between a syscall stop and SIGTRAP delivery */
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
}
}
-asmlinkage void do_debug_priv(struct pt_regs *regs)
-{
- unsigned long dc, ds;
- unsigned long die_val;
-
- ds = __mfdr(DBGREG_DS);
-
- pr_debug("do_debug_priv: pc = %08lx, ds = %08lx\n", regs->pc, ds);
-
- if (ds & DS_SSS)
- die_val = DIE_SSTEP;
- else
- die_val = DIE_BREAKPOINT;
-
- if (notify_die(die_val, "ptrace", regs, 0, 0, SIGTRAP) == NOTIFY_STOP)
- return;
-
- if (likely(ds & DS_SSS)) {
- extern void itlb_miss(void);
- extern void tlb_miss_common(void);
- struct thread_info *ti;
-
- dc = __mfdr(DBGREG_DC);
- dc &= ~DC_SS;
- __mtdr(DBGREG_DC, dc);
-
- ti = current_thread_info();
- set_ti_thread_flag(ti, TIF_BREAKPOINT);
-
- /* The TLB miss handlers don't check thread flags */
- if ((regs->pc >= (unsigned long)&itlb_miss)
- && (regs->pc <= (unsigned long)&tlb_miss_common)) {
- __mtdr(DBGREG_BWA2A, sysreg_read(RAR_EX));
- __mtdr(DBGREG_BWC2A, 0x40000001 | (get_asid() << 1));
- }
-
- /*
- * If we're running in supervisor mode, the breakpoint
- * will take us where we want directly, no need to
- * single step.
- */
- if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR)
- set_ti_thread_flag(ti, TIF_SINGLE_STEP);
- } else {
- panic("Unable to handle debug trap at pc = %08lx\n",
- regs->pc);
- }
-}
-
/*
- * Handle breakpoints, single steps and other debuggy things. To keep
- * things simple initially, we run with interrupts and exceptions
- * disabled all the time.
+ * debug_trampoline() is an assembly stub which will store all user
+ * registers on the stack and execute a breakpoint instruction.
+ *
+ * If we single-step into an exception handler which runs with
+ * interrupts disabled the whole time so it doesn't have to check for
+ * pending work, its return address will be modified so that it ends
+ * up returning to debug_trampoline.
+ *
+ * If the exception handler decides to store the user context and
+ * enable interrupts after all, it will restore the original return
+ * address and status register value. Before it returns, it will
+ * notice that TIF_BREAKPOINT is set and execute a breakpoint
+ * instruction.
*/
-asmlinkage void do_debug(struct pt_regs *regs)
-{
- unsigned long dc, ds;
+extern void debug_trampoline(void);
- ds = __mfdr(DBGREG_DS);
- pr_debug("do_debug: pc = %08lx, ds = %08lx\n", regs->pc, ds);
+asmlinkage struct pt_regs *do_debug(struct pt_regs *regs)
+{
+ struct thread_info *ti;
+ unsigned long trampoline_addr;
+ u32 status;
+ u32 ctrl;
+ int code;
+
+ status = ocd_read(DS);
+ ti = current_thread_info();
+ code = TRAP_BRKPT;
+
+ pr_debug("do_debug: status=0x%08x PC=0x%08lx SR=0x%08lx tif=0x%08lx\n",
+ status, regs->pc, regs->sr, ti->flags);
+
+ if (!user_mode(regs)) {
+ unsigned long die_val = DIE_BREAKPOINT;
+
+ if (status & (1 << OCD_DS_SSS_BIT))
+ die_val = DIE_SSTEP;
+
+ if (notify_die(die_val, "ptrace", regs, 0, 0, SIGTRAP)
+ == NOTIFY_STOP)
+ return regs;
+
+ if ((status & (1 << OCD_DS_SWB_BIT))
+ && test_and_clear_ti_thread_flag(
+ ti, TIF_BREAKPOINT)) {
+ /*
+ * Explicit breakpoint from trampoline or
+ * exception/syscall/interrupt handler.
+ *
+ * The real saved regs are on the stack right
+ * after the ones we saved on entry.
+ */
+ regs++;
+ pr_debug(" -> TIF_BREAKPOINT done, adjusted regs:"
+ "PC=0x%08lx SR=0x%08lx\n",
+ regs->pc, regs->sr);
+ BUG_ON(!user_mode(regs));
+
+ if (test_thread_flag(TIF_SINGLE_STEP)) {
+ pr_debug("Going to do single step...\n");
+ return regs;
+ }
+
+ /*
+ * No TIF_SINGLE_STEP means we're done
+ * stepping over a syscall. Do the trap now.
+ */
+ code = TRAP_TRACE;
+ } else if ((status & (1 << OCD_DS_SSS_BIT))
+ && test_ti_thread_flag(ti, TIF_SINGLE_STEP)) {
+
+ pr_debug("Stepped into something, "
+ "setting TIF_BREAKPOINT...\n");
+ set_ti_thread_flag(ti, TIF_BREAKPOINT);
+
+ /*
+ * We stepped into an exception, interrupt or
+ * syscall handler. Some exception handlers
+ * don't check for pending work, so we need to
+ * set up a trampoline just in case.
+ *
+ * The exception entry code will undo the
+ * trampoline stuff if it does a full context
+ * save (which also means that it'll check for
+ * pending work later.)
+ */
+ if ((regs->sr & MODE_MASK) == MODE_EXCEPTION) {
+ trampoline_addr
+ = (unsigned long)&debug_trampoline;
+
+ pr_debug("Setting up trampoline...\n");
+ ti->rar_saved = sysreg_read(RAR_EX);
+ ti->rsr_saved = sysreg_read(RSR_EX);
+ sysreg_write(RAR_EX, trampoline_addr);
+ sysreg_write(RSR_EX, (MODE_EXCEPTION
+ | SR_EM | SR_GM));
+ BUG_ON(ti->rsr_saved & MODE_MASK);
+ }
+
+ /*
+ * If we stepped into a system call, we
+ * shouldn't do a single step after we return
+ * since the return address is right after the
+ * "scall" instruction we were told to step
+ * over.
+ */
+ if ((regs->sr & MODE_MASK) == MODE_SUPERVISOR) {
+ pr_debug("Supervisor; no single step\n");
+ clear_ti_thread_flag(ti, TIF_SINGLE_STEP);
+ }
+
+ ctrl = ocd_read(DC);
+ ctrl &= ~(1 << OCD_DC_SS_BIT);
+ ocd_write(DC, ctrl);
+
+ return regs;
+ } else {
+ printk(KERN_ERR "Unexpected OCD_DS value: 0x%08x\n",
+ status);
+ printk(KERN_ERR "Thread flags: 0x%08lx\n", ti->flags);
+ die("Unhandled debug trap in kernel mode",
+ regs, SIGTRAP);
+ }
+ } else if (status & (1 << OCD_DS_SSS_BIT)) {
+ /* Single step in user mode */
+ code = TRAP_TRACE;
- if (test_thread_flag(TIF_BREAKPOINT)) {
- pr_debug("TIF_BREAKPOINT set\n");
- /* We're taking care of it */
- clear_thread_flag(TIF_BREAKPOINT);
- __mtdr(DBGREG_BWC2A, 0);
+ ctrl = ocd_read(DC);
+ ctrl &= ~(1 << OCD_DC_SS_BIT);
+ ocd_write(DC, ctrl);
}
- if (test_thread_flag(TIF_SINGLE_STEP)) {
- pr_debug("TIF_SINGLE_STEP set, ds = 0x%08lx\n", ds);
- if (ds & DS_SSS) {
- dc = __mfdr(DBGREG_DC);
- dc &= ~DC_SS;
- __mtdr(DBGREG_DC, dc);
+ pr_debug("Sending SIGTRAP: code=%d PC=0x%08lx SR=0x%08lx\n",
+ code, regs->pc, regs->sr);
- clear_thread_flag(TIF_SINGLE_STEP);
- ptrace_break(current, regs);
- }
- } else {
- /* regular breakpoint */
- ptrace_break(current, regs);
- }
+ clear_thread_flag(TIF_SINGLE_STEP);
+ _exception(SIGTRAP, regs, code, instruction_pointer(regs));
+
+ return regs;
}
--- /dev/null
+/*
+ * Stack trace management functions
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+
+register unsigned long current_frame_pointer asm("r7");
+
+struct stackframe {
+ unsigned long lr;
+ unsigned long fp;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+ unsigned long low, high;
+ unsigned long fp;
+ struct stackframe *frame;
+ int skip = trace->skip;
+
+ low = (unsigned long)task_stack_page(current);
+ high = low + THREAD_SIZE;
+ fp = current_frame_pointer;
+
+ while (fp >= low && fp <= (high - 8)) {
+ frame = (struct stackframe *)fp;
+
+ if (skip) {
+ skip--;
+ } else {
+ trace->entries[trace->nr_entries++] = frame->lr;
+ if (trace->nr_entries >= trace->max_entries)
+ break;
+ }
+
+ /*
+ * The next frame must be at a higher address than the
+ * current frame.
+ */
+ low = fp + 8;
+ fp = frame->fp;
+ }
+}
printk("FRAME_POINTER ");
#endif
if (current_cpu_data.features & AVR32_FEATURE_OCD) {
- unsigned long did = __mfdr(DBGREG_DID);
+ unsigned long did = ocd_read(DID);
printk("chip: 0x%03lx:0x%04lx rev %lu\n",
(did >> 1) & 0x7ff,
(did >> 12) & 0x7fff,
. = 0x100;
*(.scall.text)
*(.irq.text)
+ KPROBES_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
- KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
_etext = .;
}
}
-/*
- * This one is used by copy_to_user_page()
- */
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
- unsigned long addr, int len)
-{
- if (vma->vm_flags & VM_EXEC)
- flush_icache_range(addr, addr + len);
-}
-
asmlinkage int sys_cacheflush(int operation, void __user *addr, size_t len)
{
int ret;
out:
return ret;
}
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+{
+ memcpy(dst, src, len);
+ if (vma->vm_flags & VM_EXEC)
+ flush_icache_range((unsigned long)dst,
+ (unsigned long)dst + len);
+}
# see Documentation/kbuild/kconfig-language.txt.
#
-mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration"
+mainmenu "Blackfin Kernel Configuration"
config MMU
bool
bool
default y
-config BFIN
- bool
- default y
-
config SEMAPHORE_SLEEPERS
bool
default y
default y
config GENERIC_IRQ_PROBE
- bool
+ bool
default y
config GENERIC_TIME
bool
default y
-config IRQCHIP_DEMUX_GPIO
- bool
- depends on (BF52x || BF53x || BF561 || BF54x)
- default y
-
source "init/Kconfig"
source "kernel/Kconfig.preempt"
help
BF544 Processor Support.
+config BF547
+ bool "BF547"
+ help
+ BF547 Processor Support.
+
config BF548
bool "BF548"
help
config BF_REV_0_0
bool "0.0"
- depends on (BF549 || BF527)
+ depends on (BF52x || BF54x)
config BF_REV_0_1
- bool "0.2"
- depends on (BF549 || BF527)
+ bool "0.1"
+ depends on (BF52x || BF54x)
config BF_REV_0_2
bool "0.2"
config BF54x
bool
- depends on (BF542 || BF544 || BF548 || BF549)
+ depends on (BF542 || BF544 || BF547 || BF548 || BF549)
default y
config BFIN_DUAL_CORE
depends on !BFIN_DUAL_CORE
default y
-choice
- prompt "System type"
- default BFIN533_STAMP
- help
- Do NOT change the board here. Please use the top level
- configuration to ensure that all the other settings are
- correct.
-
-config BFIN527_EZKIT
- bool "BF527-EZKIT"
- depends on (BF522 || BF525 || BF527)
- help
- BF533-EZKIT-LITE board Support.
-
-config BFIN533_EZKIT
- bool "BF533-EZKIT"
- depends on (BF533 || BF532 || BF531)
- help
- BF533-EZKIT-LITE board Support.
-
-config BFIN533_STAMP
- bool "BF533-STAMP"
- depends on (BF533 || BF532 || BF531)
- help
- BF533-STAMP board Support.
-
-config BFIN537_STAMP
- bool "BF537-STAMP"
- depends on (BF537 || BF536 || BF534)
- help
- BF537-STAMP board Support.
-
-config BFIN533_BLUETECHNIX_CM
- bool "Bluetechnix CM-BF533"
- depends on (BF533)
- help
- CM-BF533 support for EVAL- and DEV-Board.
-
-config BFIN537_BLUETECHNIX_CM
- bool "Bluetechnix CM-BF537"
- depends on (BF537)
- help
- CM-BF537 support for EVAL- and DEV-Board.
-
-config BFIN548_EZKIT
- bool "BF548-EZKIT"
- depends on (BF548 || BF549)
- help
- BFIN548-EZKIT board Support.
-
-config BFIN561_BLUETECHNIX_CM
- bool "Bluetechnix CM-BF561"
- depends on (BF561)
- help
- CM-BF561 support for EVAL- and DEV-Board.
-
-config BFIN561_EZKIT
- bool "BF561-EZKIT"
- depends on (BF561)
- help
- BF561-EZKIT-LITE board Support.
-
-config BFIN561_TEPLA
- bool "BF561-TEPLA"
- depends on (BF561)
- help
- BF561-TEPLA board Support.
-
-config PNAV10
- bool "PNAV 1.0 board"
- depends on (BF537)
- help
- PNAV 1.0 board Support.
-
-config H8606_HVSISTEMAS
- bool "HV Sistemas H8606"
- depends on (BF532)
- help
- HV Sistemas H8606 board support.
-
-config GENERIC_BOARD
- bool "Custom"
- depends on (BF537 || BF536 \
- || BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
- help
- GENERIC or Custom board Support.
-
-endchoice
-
config MEM_GENERIC_BOARD
bool
depends on GENERIC_BOARD
configuration.
config PLL_BYPASS
- bool "Bypass PLL"
- depends on BFIN_KERNEL_CLOCK
- default n
+ bool "Bypass PLL"
+ depends on BFIN_KERNEL_CLOCK
+ default n
config CLKIN_HALF
bool "Half Clock In"
default 500000000 if BF534
default 400000000 if BF536
default 600000000 if BF537
- default 533000000 if BF538
- default 533000000 if BF539
+ default 533333333 if BF538
+ default 533333333 if BF539
default 600000000 if BF542
- default 533000000 if BF544
- default 533000000 if BF549
+ default 533333333 if BF544
+ default 533333333 if BF549
default 600000000 if BF561
config MIN_VCO_HZ
config MAX_SCLK_HZ
int
- default 133000000
+ default 133333333
config MIN_SCLK_HZ
int
default 0x99B3
endmenu
+config EBIU_MBSCTLVAL
+ hex "EBIU Bank Select Control Register"
+ depends on BF54x
+ default 0
+
+config EBIU_MODEVAL
+ hex "Flash Memory Mode Control Register"
+ depends on BF54x
+ default 1
+
+config EBIU_FCTLVAL
+ hex "Flash Memory Bank Control Register"
+ depends on BF54x
+ default 6
endmenu
#############################################################################
source "kernel/Kconfig.instrumentation"
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_HWERR
- bool "Hardware error interrupt debugging"
- depends on DEBUG_KERNEL
- help
- When enabled, the hardware error interrupt is never disabled, and
- will happen immediately when an error condition occurs. This comes
- at a slight cost in code size, but is necessary if you are getting
- hardware error interrupts and need to know where they are coming
- from.
-
-config DEBUG_ICACHE_CHECK
- bool "Check Instruction cache coherency"
- depends on DEBUG_KERNEL
- depends on DEBUG_HWERR
- help
- Say Y here if you are getting weird unexplained errors. This will
- ensure that icache is what SDRAM says it should be by doing a
- byte wise comparison between SDRAM and instruction cache. This
- also relocates the irq_panic() function to L1 memory, (which is
- un-cached).
-
-config DEBUG_HUNT_FOR_ZERO
- bool "Catch NULL pointer reads/writes"
- default y
- help
- Say Y here to catch reads/writes to anywhere in the memory range
- from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
- catching common programming errors such as NULL pointer dereferences.
-
- Misbehaving applications will be killed (generate a SEGV) while the
- kernel will trigger a panic.
-
- Enabling this option will take up an extra entry in CPLB table.
- Otherwise, there is no extra overhead.
-
-config DEBUG_BFIN_HWTRACE_ON
- bool "Turn on Blackfin's Hardware Trace"
- default y
- help
- All Blackfins include a Trace Unit which stores a history of the last
- 16 changes in program flow taken by the program sequencer. The history
- allows the user to recreate the program sequencer’s recent path. This
- can be handy when an application dies - we print out the execution
- path of how it got to the offending instruction.
-
- By turning this off, you may save a tiny amount of power.
-
-choice
- prompt "Omit loop Tracing"
- default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
- depends on DEBUG_BFIN_HWTRACE_ON
- help
- The trace buffer can be configured to omit recording of changes in
- program flow that match either the last entry or one of the last
- two entries. Omitting one of these entries from the record prevents
- the trace buffer from overflowing because of any sort of loop (for, do
- while, etc) in the program.
-
- Because zero-overhead Hardware loops are not recorded in the trace buffer,
- this feature can be used to prevent trace overflow from loops that
- are nested four deep.
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
- bool "Trace all Loops"
- help
- The trace buffer records all changes of flow
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
- bool "Compress single-level loops"
- help
- The trace buffer does not record single loops - helpful if trace
- is spinning on a while or do loop.
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
- bool "Compress two-level loops"
- help
- The trace buffer does not record loops two levels deep. Helpful if
- the trace is spinning in a nested loop
-
-endchoice
-
-config DEBUG_BFIN_HWTRACE_COMPRESSION
- int
- depends on DEBUG_BFIN_HWTRACE_ON
- default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
- default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
- default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
-
-
-config DEBUG_BFIN_HWTRACE_EXPAND
- bool "Expand Trace Buffer greater than 16 entries"
- depends on DEBUG_BFIN_HWTRACE_ON
- default n
- help
- By selecting this option, every time the 16 hardware entries in
- the Blackfin's HW Trace buffer are full, the kernel will move them
- into a software buffer, for dumping when there is an issue. This
- has a great impact on performance, (an interrupt every 16 change of
- flows) and should normally be turned off, except in those nasty
- debugging sessions
-
-config DEBUG_BFIN_HWTRACE_EXPAND_LEN
- int "Size of Trace buffer (in power of 2k)"
- range 0 4
- depends on DEBUG_BFIN_HWTRACE_EXPAND
- default 1
- help
- This sets the size of the software buffer that the trace information
- is kept in.
- 0 for (2^0) 1k, or 256 entries,
- 1 for (2^1) 2k, or 512 entries,
- 2 for (2^2) 4k, or 1024 entries,
- 3 for (2^3) 8k, or 2048 entries,
- 4 for (2^4) 16k, or 4096 entries
-
-config DEBUG_BFIN_NO_KERN_HWTRACE
- bool "Trace user apps (turn off hwtrace in kernel)"
- depends on DEBUG_BFIN_HWTRACE_ON
- default n
- help
- Some pieces of the kernel contain a lot of flow changes which can
- quickly fill up the hardware trace buffer. When debugging crashes,
- the hardware trace may indicate that the problem lies in kernel
- space when in reality an application is buggy.
-
- Say Y here to disable hardware tracing in some known "jumpy" pieces
- of code so that the trace buffer will extend further back.
-
-config EARLY_PRINTK
- bool "Early printk"
- default n
- help
- This option enables special console drivers which allow the kernel
- to print messages very early in the bootup process.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. After enabling this
- feature, you must add "earlyprintk=serial,uart0,57600" to the
- command line (bootargs). It is safe to say Y here in all cases, as
- all of this lives in the init section and is thrown away after the
- kernel boots completely.
-
-config DUAL_CORE_TEST_MODULE
- tristate "Dual Core Test Module"
- depends on (BF561)
- default n
- help
- Say Y here to build-in dual core test module for dual core test.
-
-config CPLB_INFO
- bool "Display the CPLB information"
- help
- Display the CPLB information.
-
-config ACCESS_CHECK
- bool "Check the user pointer address"
- default y
- help
- Usually the pointer transfer from user space is checked to see if its
- address is in the kernel space.
-
- Say N here to disable that check to improve the performance.
-
-endmenu
+source "arch/blackfin/Kconfig.debug"
source "security/Kconfig"
--- /dev/null
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_MMRS
+ bool "Generate Blackfin MMR tree"
+ select DEBUG_FS
+ help
+ Create a tree of Blackfin MMRs via the debugfs tree. If
+ you enable this, you will find all MMRs laid out in the
+ /sys/kernel/debug/blackfin/ directory where you can read/write
+ MMRs directly from userspace. This is obviously just a debug
+ feature.
+
+config DEBUG_HWERR
+ bool "Hardware error interrupt debugging"
+ depends on DEBUG_KERNEL
+ help
+ When enabled, the hardware error interrupt is never disabled, and
+ will happen immediately when an error condition occurs. This comes
+ at a slight cost in code size, but is necessary if you are getting
+ hardware error interrupts and need to know where they are coming
+ from.
+
+config DEBUG_ICACHE_CHECK
+ bool "Check Instruction cache coherency"
+ depends on DEBUG_KERNEL
+ depends on DEBUG_HWERR
+ help
+ Say Y here if you are getting weird unexplained errors. This will
+ ensure that icache is what SDRAM says it should be by doing a
+ byte wise comparison between SDRAM and instruction cache. This
+ also relocates the irq_panic() function to L1 memory, (which is
+ un-cached).
+
+config DEBUG_HUNT_FOR_ZERO
+ bool "Catch NULL pointer reads/writes"
+ default y
+ help
+ Say Y here to catch reads/writes to anywhere in the memory range
+ from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
+ catching common programming errors such as NULL pointer dereferences.
+
+ Misbehaving applications will be killed (generate a SEGV) while the
+ kernel will trigger a panic.
+
+ Enabling this option will take up an extra entry in CPLB table.
+ Otherwise, there is no extra overhead.
+
+config DEBUG_BFIN_HWTRACE_ON
+ bool "Turn on Blackfin's Hardware Trace"
+ default y
+ help
+ All Blackfins include a Trace Unit which stores a history of the last
+ 16 changes in program flow taken by the program sequencer. The history
+ allows the user to recreate the program sequencer’s recent path. This
+ can be handy when an application dies - we print out the execution
+ path of how it got to the offending instruction.
+
+ By turning this off, you may save a tiny amount of power.
+
+choice
+ prompt "Omit loop Tracing"
+ default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ depends on DEBUG_BFIN_HWTRACE_ON
+ help
+ The trace buffer can be configured to omit recording of changes in
+ program flow that match either the last entry or one of the last
+ two entries. Omitting one of these entries from the record prevents
+ the trace buffer from overflowing because of any sort of loop (for, do
+ while, etc) in the program.
+
+ Because zero-overhead Hardware loops are not recorded in the trace buffer,
+ this feature can be used to prevent trace overflow from loops that
+ are nested four deep.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ bool "Trace all Loops"
+ help
+ The trace buffer records all changes of flow
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ bool "Compress single-level loops"
+ help
+ The trace buffer does not record single loops - helpful if trace
+ is spinning on a while or do loop.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+ bool "Compress two-level loops"
+ help
+ The trace buffer does not record loops two levels deep. Helpful if
+ the trace is spinning in a nested loop
+
+endchoice
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION
+ int
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+
+
+config DEBUG_BFIN_HWTRACE_EXPAND
+ bool "Expand Trace Buffer greater than 16 entries"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ By selecting this option, every time the 16 hardware entries in
+ the Blackfin's HW Trace buffer are full, the kernel will move them
+ into a software buffer, for dumping when there is an issue. This
+ has a great impact on performance, (an interrupt every 16 change of
+ flows) and should normally be turned off, except in those nasty
+ debugging sessions
+
+config DEBUG_BFIN_HWTRACE_EXPAND_LEN
+ int "Size of Trace buffer (in power of 2k)"
+ range 0 4
+ depends on DEBUG_BFIN_HWTRACE_EXPAND
+ default 1
+ help
+ This sets the size of the software buffer that the trace information
+ is kept in.
+ 0 for (2^0) 1k, or 256 entries,
+ 1 for (2^1) 2k, or 512 entries,
+ 2 for (2^2) 4k, or 1024 entries,
+ 3 for (2^3) 8k, or 2048 entries,
+ 4 for (2^4) 16k, or 4096 entries
+
+config DEBUG_BFIN_NO_KERN_HWTRACE
+ bool "Trace user apps (turn off hwtrace in kernel)"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ Some pieces of the kernel contain a lot of flow changes which can
+ quickly fill up the hardware trace buffer. When debugging crashes,
+ the hardware trace may indicate that the problem lies in kernel
+ space when in reality an application is buggy.
+
+ Say Y here to disable hardware tracing in some known "jumpy" pieces
+ of code so that the trace buffer will extend further back.
+
+config EARLY_PRINTK
+ bool "Early printk"
+ default n
+ help
+ This option enables special console drivers which allow the kernel
+ to print messages very early in the bootup process.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. After enabling this
+ feature, you must add "earlyprintk=serial,uart0,57600" to the
+ command line (bootargs). It is safe to say Y here in all cases, as
+ all of this lives in the init section and is thrown away after the
+ kernel boots completely.
+
+config DUAL_CORE_TEST_MODULE
+ tristate "Dual Core Test Module"
+ depends on (BF561)
+ default n
+ help
+ Say Y here to build-in dual core test module for dual core test.
+
+config CPLB_INFO
+ bool "Display the CPLB information"
+ help
+ Display the CPLB information.
+
+config ACCESS_CHECK
+ bool "Check the user pointer address"
+ default y
+ help
+ Usually the pointer transfer from user space is checked to see if its
+ address is in the kernel space.
+
+ Say N here to disable that check to improve the performance.
+
+endmenu
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF544) := bf548
+machine-$(CONFIG_BF547) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF544) := bf544
+cpu-$(CONFIG_BF547) := bf547
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.9
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
CONFIG_BFIN_SINGLE_CORE=y
-CONFIG_BFIN527_EZKIT=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
CONFIG_MEM_MT48LC32M16A2TG_75=y
+CONFIG_BFIN527_EZKIT=y
#
# BF527 Specific Configuration
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
CONFIG_BFIN_NAND_ALE=1
CONFIG_BFIN_NAND_READY=3
CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_BF5XX is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
CONFIG_BF533=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
CONFIG_BFIN533_EZKIT=y
# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
CONFIG_MTD_BF5xx=m
CONFIG_BFIN_FLASH_SIZE=0x400000
CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
CONFIG_BF533=y
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
+CONFIG_MEM_MT48LC64M4A2FB_7E=y
+CONFIG_BFIN_SHARED_FLASH_ENET=y
# CONFIG_BFIN533_EZKIT is not set
CONFIG_BFIN533_STAMP=y
-# CONFIG_BFIN537_STAMP is not set
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC64M4A2FB_7E=y
-CONFIG_BFIN_SHARED_FLASH_ENET=y
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
# CONFIG_PAL_YCBCR is not set
CONFIG_ADV7393_1XMEM=y
# CONFIG_ADV7393_2XMEM is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_LOGO is not set
#
# CONFIG_SND_SOC is not set
-#
-# SoC Audio for the ADI Blackfin
-#
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-
#
# Open Sound System
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
CONFIG_BF537=y
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_IRQ_PLL_WAKEUP=7
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_PPI=8
CONFIG_IRQ_SPORT0_RX=9
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
CONFIG_IRQ_MAC_RX=11
CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TMR0=12
CONFIG_IRQ_TMR5=12
CONFIG_IRQ_TMR6=12
CONFIG_IRQ_TMR7=12
-CONFIG_IRQ_PROG_INTA=12
CONFIG_IRQ_PORTG_INTB=12
CONFIG_IRQ_MEM_DMA0=13
CONFIG_IRQ_MEM_DMA1=13
CONFIG_IRQ_WATCH=13
+CONFIG_BFIN537_STAMP=y
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_PNAV10 is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
#
# Board customizations
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
CONFIG_MTD_BF5xx=m
CONFIG_BFIN_FLASH_SIZE=0x400000
CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
CONFIG_LQ035_SLAVE_ADDR=0x58
# CONFIG_FB_BFIN_LANDSCAPE is not set
# CONFIG_FB_BFIN_BGR is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_LOGO is not set
#
# CONFIG_SND_SOC is not set
-#
-# SoC Audio for the ADI Blackfin
-#
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-
#
# Open Sound System
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.10
-# Sat Oct 27 02:34:07 2007
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
CONFIG_BF549=y
# CONFIG_BF561 is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN527_EZKIT is not set
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-CONFIG_BFIN548_EZKIT=y
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_GENERIC_BOARD is not set
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_SPORT0_RX=9
CONFIG_IRQ_TIMER8=11
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
+CONFIG_BFIN548_EZKIT=y
#
# BF548 Specific Configuration
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533333333
+CONFIG_MAX_VCO_HZ=533000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
CONFIG_BANK_1=0x5554
CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B3
+CONFIG_EBUI_MBSCTLVAL=0x0
+CONFIG_EBUI_MODEVAL=0x1
+CONFIG_EBUI_FCTLVAL=0x6
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
CONFIG_SND_BF5XX_SOC=y
CONFIG_SND_BF5XX_SOC_AC97=y
CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
CONFIG_SND_BF5XX_SPORT_NUM=0
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
CONFIG_SND_SOC_AD1980=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
# CONFIG_BF537 is not set
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
CONFIG_BF561=y
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BFIN_DUAL_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_SPI_ERROR=7
CONFIG_BFIN561_EZKIT=y
# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_GENERIC_BOARD is not set
-CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_GENERIC_BF561_BOARD is not set
#
# BF561 Specific Configuration
#
# Priority
#
-CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_DMA1_ERROR=7
CONFIG_IRQ_DMA2_ERROR=7
CONFIG_IRQ_IMDMA_ERROR=7
CONFIG_IRQ_PPI0_ERROR=7
CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_SPI_ERROR=7
CONFIG_IRQ_UART_ERROR=7
CONFIG_IRQ_RESERVED_ERROR=7
CONFIG_IRQ_DMA1_0=8
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
CONFIG_MTD_BF5xx=m
CONFIG_BFIN_FLASH_SIZE=0x0400000
CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22.12
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
+# CONFIG_NP2 is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_BFIN_SINGLE_CORE=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+CONFIG_H8606_HVSISTEMAS=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=32
+CONFIG_MEM_ADD_WIDTH=9
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+# CONFIG_CACHELINE_ALIGNED_L1 is not set
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_LARGE_ALLOCS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_ICACHE_LOCK=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+CONFIG_L1_MAX_PIECE=16
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B3
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x100000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_BF5xx is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+CONFIG_DM9000=y
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_BF53X_PFBUTTONS is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+CONFIG_BF5xx_PFLAGS=y
+# CONFIG_BF5xx_PFLAGS_PROC is not set
+# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_SIMPLE_TIMER=y
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+CONFIG_BFIN_TIMER_LATENCY=y
+# CONFIG_AD5304 is not set
+# CONFIG_BF5xx_FBDMA is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_BFIN_WDT is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_BLACKFIN_DPMC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA Blackfin devices
+#
+CONFIG_SND_BLACKFIN_AD1836=m
+CONFIG_SND_BLACKFIN_AD1836_TDM=y
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+CONFIG_SND_BLACKFIN_SPORT=0
+CONFIG_SND_BLACKFIN_SPI_PFBIT=4
+# CONFIG_SND_BFIN_AD73311 is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# PBX support
+#
+# CONFIG_PBX is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.12
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
CONFIG_BF537=y
# CONFIG_BF542 is not set
# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
# CONFIG_BF548 is not set
# CONFIG_BF549 is not set
# CONFIG_BF561 is not set
# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-CONFIG_PNAV10=y
-# CONFIG_GENERIC_BOARD is not set
CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_IRQ_PLL_WAKEUP=7
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_PPI=8
CONFIG_IRQ_SPORT0_RX=9
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
CONFIG_IRQ_MAC_RX=11
CONFIG_IRQ_MAC_TX=11
CONFIG_IRQ_TMR0=12
CONFIG_IRQ_TMR5=12
CONFIG_IRQ_TMR6=12
CONFIG_IRQ_TMR7=12
-CONFIG_IRQ_PROG_INTA=12
CONFIG_IRQ_PORTG_INTB=12
CONFIG_IRQ_MEM_DMA0=13
CONFIG_IRQ_MEM_DMA1=13
CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_PNAV10=y
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
#
# Board customizations
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MAX_SCLK_HZ=133000000
CONFIG_MIN_SCLK_HZ=27000000
#
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
CONFIG_C_CDPRIO=y
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
+# CONFIG_AX88180 is not set
#
# Wireless LAN
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
# CONFIG_BFIN_TIMER_LATENCY is not set
CONFIG_LQ035_SLAVE_ADDR=0x58
CONFIG_FB_BFIN_LANDSCAPE=y
# CONFIG_FB_BFIN_BGR is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_LOGO is not set
#
# CONFIG_SND_SOC is not set
-#
-# SoC Audio for the ADI Blackfin
-#
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-
#
# Open Sound System
#
return dma_ch[channel].regs->curr_desc_ptr;
}
+EXPORT_SYMBOL(get_dma_curr_desc_ptr);
unsigned long get_dma_curr_addr(unsigned int channel)
{
/* platform dependent support */
EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(dump_thread);
EXPORT_SYMBOL(ip_fast_csum);
EXPORT_SYMBOL(__down_interruptible);
EXPORT_SYMBOL(is_in_rom);
+EXPORT_SYMBOL(bfin_return_from_exception);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy);
* their interface isn't gonna change any time soon now, so
* it's OK to leave it out of version control.
*/
-EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(get_wchan);
/*
* libgcc functions - functions that are used internally by the
EXPORT_SYMBOL(insw);
EXPORT_SYMBOL(outsl);
EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(insl_16);
EXPORT_SYMBOL(irq_flags);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
#include <asm/cplb.h>
#include <asm/cplbinit.h>
-u_long icplb_table[MAX_CPLBS+1];
-u_long dcplb_table[MAX_CPLBS+1];
+u_long icplb_table[MAX_CPLBS + 1];
+u_long dcplb_table[MAX_CPLBS + 1];
#ifdef CONFIG_CPLB_SWITCH_TAB_L1
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
-
-#ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
-#endif /* CONFIG_CPLB_INFO */
-
+# define PDT_ATTR __attribute__((l1_data))
#else
+# define PDT_ATTR
+#endif
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
+u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR;
+u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR;
#ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
-#endif /* CONFIG_CPLB_INFO */
-
-#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
+u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR;
+u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR;
+#endif
struct s_cplb {
struct cplb_tab init_i;
#else
.valid = 0,
#endif
- .name = "ZERO Pointer Saveguard",
+ .name = "Zero Pointer Guard Page",
},
{
.start = L1_CODE_START,
.end = 0, /* dynamic */
.psize = 0,
.attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
- .i_conf = SDRAM_IGENERIC,
- .d_conf = SDRAM_DGENERIC,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DGENERIC,
.valid = 1,
- .name = "SDRAM Kernel",
+ .name = "Kernel Memory",
},
{
.start = 0, /* dynamic */
.end = 0, /* dynamic */
.psize = 0,
.attr = INITIAL_T | SWITCH_T | D_CPLB,
- .i_conf = SDRAM_IGENERIC,
- .d_conf = SDRAM_DNON_CHBL,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DNON_CHBL,
.valid = 1,
- .name = "SDRAM RAM MTD",
+ .name = "uClinux MTD Memory",
},
{
.start = 0, /* dynamic */
.attr = INITIAL_T | SWITCH_T | D_CPLB,
.d_conf = SDRAM_DNON_CHBL,
.valid = 1,
- .name = "SDRAM Uncached DMA ZONE",
+ .name = "Uncached DMA Zone",
},
{
.start = 0, /* dynamic */
.i_conf = 0, /* dynamic */
.d_conf = 0, /* dynamic */
.valid = 1,
- .name = "SDRAM Reserved Memory",
+ .name = "Reserved Memory",
},
{
.start = ASYNC_BANK0_BASE,
.attr = SWITCH_T | D_CPLB,
.d_conf = SDRAM_EBIU,
.valid = 1,
- .name = "ASYNC Memory",
+ .name = "Asynchronous Memory Banks",
},
{
-#if defined(CONFIG_BF561)
- .start = L2_SRAM,
- .end = L2_SRAM_END,
+#ifdef L2_START
+ .start = L2_START,
+ .end = L2_START + L2_LENGTH,
.psize = SIZE_1M,
- .attr = SWITCH_T | D_CPLB,
+ .attr = SWITCH_T | I_CPLB | D_CPLB,
.i_conf = L2_MEMORY,
.d_conf = L2_MEMORY,
.valid = 1,
.valid = 0,
#endif
.name = "L2 Memory",
- }
+ },
+ {
+ .start = BOOT_ROM_START,
+ .end = BOOT_ROM_START + BOOT_ROM_LENGTH,
+ .psize = SIZE_1M,
+ .attr = SWITCH_T | I_CPLB | D_CPLB,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DGENERIC,
+ .valid = 1,
+ .name = "On-Chip BootROM",
+ },
};
static u16 __init lock_kernel_check(u32 start, u32 end)
{
- if ((start <= (u32) _stext && end >= (u32) _end)
- || (start >= (u32) _stext && end <= (u32) _end))
+ if ((end <= (u32) _end && end >= (u32)_stext) ||
+ (start <= (u32) _end && start >= (u32)_stext))
return IN_KERNEL;
return 0;
}
else
cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
- for (i = ZERO_P; i <= L2_MEM; i++) {
+ for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) {
if (!cplb_data[i].valid)
continue;
if (likely(early_console == NULL))
setup_early_printk(DEFAULT_EARLY_PORT);
- dump_bfin_regs(fp, retaddr);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
dump_bfin_trace_buffer();
panic("Died early");
}
}
-void show_regs(struct pt_regs *regs)
-{
- printk(KERN_NOTICE "\n");
- printk(KERN_NOTICE
- "PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n",
- regs->pc, regs->astat, regs->seqstat, regs->rets);
- printk(KERN_NOTICE
- "A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n",
- regs->a0x, regs->a0w, regs->a1x, regs->a1w);
- printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
- regs->p0, regs->p1, regs->p2, regs->p3);
- printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5);
- printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
- regs->r0, regs->r1, regs->r2, regs->r3);
- printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
- regs->r4, regs->r5, regs->r6, regs->r7);
-
- if (!regs->ipend)
- printk(KERN_NOTICE "USP: %08lx\n", rdusp());
-}
-
/* Fill in the fpu structure for a core dump. */
int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
return 0;
}
-/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs *regs, struct user *dump)
-{
- dump->magic = CMAGIC;
- dump->start_code = 0;
- dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long)(current->mm->brk +
- (PAGE_SIZE - 1))) >> PAGE_SHIFT;
- dump->u_dsize -= dump->u_tsize;
- dump->u_ssize = 0;
-
- if (dump->start_stack < TASK_SIZE)
- dump->u_ssize =
- ((unsigned long)(TASK_SIZE -
- dump->start_stack)) >> PAGE_SHIFT;
-
- dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump);
-
- dump->regs.r0 = regs->r0;
- dump->regs.r1 = regs->r1;
- dump->regs.r2 = regs->r2;
- dump->regs.r3 = regs->r3;
- dump->regs.r4 = regs->r4;
- dump->regs.r5 = regs->r5;
- dump->regs.r6 = regs->r6;
- dump->regs.r7 = regs->r7;
- dump->regs.p0 = regs->p0;
- dump->regs.p1 = regs->p1;
- dump->regs.p2 = regs->p2;
- dump->regs.p3 = regs->p3;
- dump->regs.p4 = regs->p4;
- dump->regs.p5 = regs->p5;
- dump->regs.orig_p0 = regs->orig_p0;
- dump->regs.a0w = regs->a0w;
- dump->regs.a1w = regs->a1w;
- dump->regs.a0x = regs->a0x;
- dump->regs.a1x = regs->a1x;
- dump->regs.rets = regs->rets;
- dump->regs.astat = regs->astat;
- dump->regs.pc = regs->pc;
-}
-
/*
* sys_execve() executes a new program.
*/
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
+#include <asm/div64.h>
#include <asm/fixed_code.h>
#include <asm/early_printk.h>
unsigned long sclk_to_usecs(unsigned long sclk)
{
- return (USEC_PER_SEC * (u64)sclk) / get_sclk();
+ u64 tmp = USEC_PER_SEC * (u64)sclk;
+ do_div(tmp, get_sclk());
+ return tmp;
}
EXPORT_SYMBOL(sclk_to_usecs);
unsigned long usecs_to_sclk(unsigned long usecs)
{
- return (get_sclk() * (u64)usecs) / USEC_PER_SEC;
+ u64 tmp = get_sclk() * (u64)usecs;
+ do_div(tmp, USEC_PER_SEC);
+ return tmp;
}
EXPORT_SYMBOL(usecs_to_sclk);
}
/* we were unable to find this address anywhere */
- sprintf(buf, "[<0x%p>]", (void *)address);
+ sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
done:
write_unlock_irqrestore(&tasklist_lock, flags);
console_verbose();
oops_in_progress = 1;
printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
- dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_process(fp);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
panic("Double Fault - unrecoverable event\n");
}
case VEC_EXCPT03:
info.si_code = SEGV_STACKFLOW;
sig = SIGSEGV;
- printk(KERN_NOTICE EXC_0x03);
+ printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x04 - User Defined, Caught by default */
case VEC_OVFLOW:
info.si_code = TRAP_TRACEFLOW;
sig = SIGTRAP;
- printk(KERN_NOTICE EXC_0x11);
+ printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x12 - Reserved, Caught by default */
case VEC_UNDEF_I:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x21);
+ printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x22 - Illegal Instruction Combination, handled here */
case VEC_ILGAL_I:
info.si_code = ILL_ILLPARAOP;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x22);
+ printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
- /* 0x23 - Data CPLB Protection Violation,
- normal case is handled in _cplb_hdr */
+ /* 0x23 - Data CPLB protection violation, handled here */
case VEC_CPLB_VL:
info.si_code = ILL_CPLB_VI;
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x23);
+ sig = SIGBUS;
+ printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x24 - Data access misaligned, handled here */
case VEC_MISALI_D:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x24);
+ printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x25 - Unrecoverable Event, handled here */
case VEC_UNCOV:
info.si_code = ILL_ILLEXCPT;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x25);
+ printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
case VEC_CPLB_M:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x26);
+ printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
printk(KERN_NOTICE "NULL pointer access (probably)\n");
#else
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x27);
+ printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
#endif
CHK_DEBUGGER_TRAP();
break;
case VEC_WATCH:
info.si_code = TRAP_WATCHPT;
sig = SIGTRAP;
- pr_debug(EXC_0x28);
+ pr_debug(EXC_0x28(KERN_DEBUG));
CHK_DEBUGGER_TRAP_MAYBE();
/* Check if this is a watchpoint in kernel space */
if (fp->ipend & 0xffc0)
case VEC_MISALI_I:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2A);
+ printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
- /* 0x2B - Instruction CPLB protection Violation,
- handled in _cplb_hdr */
+ /* 0x2B - Instruction CPLB protection violation, handled here */
case VEC_CPLB_I_VL:
info.si_code = ILL_CPLB_VI;
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2B);
+ sig = SIGBUS;
+ printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
case VEC_CPLB_I_M:
info.si_code = ILL_CPLB_MISS;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2C);
+ printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
#else
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2D);
+ printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
#endif
CHK_DEBUGGER_TRAP();
break;
case VEC_ILL_RES:
info.si_code = ILL_PRVOPC;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2E);
+ printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2F - Reserved, Caught by default */
if (sig != SIGTRAP) {
unsigned long stack;
- dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_process(fp);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
/* Print out the trace buffer if it makes sense */
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
show_stack(current, &stack);
if (oops_in_progress) {
#ifndef CONFIG_ACCESS_CHECK
- printk(KERN_EMERG "Hey - dork - please turn on "
- "CONFIG_ACCESS_CHECK\n");
+ printk(KERN_EMERG "Please turn on "
+ "CONFIG_ACCESS_CHECK\n");
#endif
panic("Kernel exception");
}
-
- /* Ensure that bad return addresses don't end up in an infinite
- * loop, due to speculative loads/reads
- */
- fp->pc = SAFE_USER_INSTRUCTION;
}
+
info.si_signo = sig;
info.si_errno = 0;
info.si_addr = (void *)fp->pc;
force_sig_info(sig, &info, current);
+ /* Ensure that bad return addresses don't end up in an infinite
+ * loop, due to speculative loads/reads. This needs to be done after
+ * the signal has been sent.
+ */
+ if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP)
+ fp->pc = SAFE_USER_INSTRUCTION;
+
trace_buffer_restore(j);
return;
}
show_stack(current, &stack);
trace_buffer_restore(tflags);
}
-
EXPORT_SYMBOL(dump_stack);
-void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
+void dump_bfin_process(struct pt_regs *fp)
{
- char buf [150];
+ /* We should be able to look at fp->ipend, but we don't push it on the
+ * stack all the time, so do this until we fix that */
+ unsigned int context = bfin_read_IPEND();
+
+ if (oops_in_progress)
+ printk(KERN_EMERG "Kernel OOPS in progress\n");
+
+ if (context & 0x0020)
+ printk(KERN_NOTICE "Deferred excecption or HW Error context\n");
+ else if (context & 0x3FC0)
+ printk(KERN_NOTICE "Interrupt context\n");
+ else if (context & 0x4000)
+ printk(KERN_NOTICE "Deferred Interrupt context\n");
+ else if (context & 0x8000)
+ printk(KERN_NOTICE "Kernel process context\n");
+
+ if (current->pid && current->mm) {
+ printk(KERN_NOTICE "CURRENT PROCESS:\n");
+ printk(KERN_NOTICE "COMM=%s PID=%d\n",
+ current->comm, current->pid);
+
+ printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
+ KERN_NOTICE "\n",
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
+ } else
+ printk(KERN_NOTICE "\n" KERN_NOTICE
+ "No Valid process in current context\n");
+}
- if (!oops_in_progress) {
- if (current->pid && current->mm) {
- printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n");
- printk(KERN_NOTICE "COMM=%s PID=%d\n",
- current->comm, current->pid);
-
- printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_NOTICE "\n",
- (void *)current->mm->start_code,
- (void *)current->mm->end_code,
- (void *)current->mm->start_data,
- (void *)current->mm->end_data,
- (void *)current->mm->end_data,
- (void *)current->mm->brk,
- (void *)current->mm->start_stack);
- } else {
- printk (KERN_NOTICE "\n" KERN_NOTICE
- "No Valid pid - Either things are really messed up,"
- " or you are in the kernel\n");
- }
- } else {
- printk(KERN_NOTICE "Kernel or interrupt exception\n");
- }
+void dump_bfin_mem(void *retaddr)
+{
if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end
#if L1_CODE_LENGTH != 0
printk("\n");
} else
printk("\n" KERN_NOTICE
- "Cannot look at the [PC] for it is"
- " in unreadable memory - sorry\n");
+ "Cannot look at the [PC] <%p> for it is"
+ " in unreadable memory - sorry\n", retaddr);
+}
+
+void show_regs(struct pt_regs *fp)
+{
+ char buf [150];
printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
printk(KERN_NOTICE " RETX: %s\n", buf);
decode_address(buf, fp->rets);
printk(KERN_NOTICE " RETS: %s\n", buf);
+ decode_address(buf, fp->pc);
+ printk(KERN_NOTICE " PC: %s\n", buf);
if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
- dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_process(fp);
+ dump_bfin_mem((void *)fp->retx);
+ show_regs(fp);
dump_stack();
panic("Unrecoverable event\n");
}
lib-y := \
ashldi3.o ashrdi3.o lshrdi3.o \
- muldi3.o divsi3.o udivsi3.o udivdi3.o modsi3.o umodsi3.o \
+ muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \
strcmp.o strcpy.o strncmp.o strncpy.o \
umulsi3_highpart.o smulsi3_highpart.o \
sti R3;
RTS;
ENDPROC(_insb)
+
+
+
+ENTRY(_insl_16)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s: R0 = [P0];
+ W[P1++] = R0;
+ R0 = R0 >> 16;
+ W[P1++] = R0;
+ NOP;
+.Llong16_loop_e: NOP;
+ sti R3;
+ RTS;
+ENDPROC(_insl_16)
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strcmp __inline_strcmp
#include <asm/string.h>
#undef strcmp
+#include <linux/module.h>
+
int strcmp(const char *dest, const char *src)
{
return __inline_strcmp(dest, src);
}
+EXPORT_SYMBOL(strcmp);
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strcpy __inline_strcpy
#include <asm/string.h>
#undef strcpy
+#include <linux/module.h>
+
char *strcpy(char *dest, const char *src)
{
return __inline_strcpy(dest, src);
}
+EXPORT_SYMBOL(strcpy);
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strncmp __inline_strncmp
#include <asm/string.h>
#undef strncmp
+#include <linux/module.h>
+
int strncmp(const char *cs, const char *ct, size_t count)
{
return __inline_strncmp(cs, ct, count);
}
+EXPORT_SYMBOL(strncmp);
-#include <linux/types.h>
+/*
+ * Provide symbol in case str func is not inlined.
+ *
+ * Copyright (c) 2006-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#define strncpy __inline_strncpy
#include <asm/string.h>
#undef strncpy
+#include <linux/module.h>
+
char *strncpy(char *dest, const char *src, size_t n)
{
return __inline_strncpy(dest, src, n);
}
+EXPORT_SYMBOL(strncpy);
+++ /dev/null
-/*
- * udivdi3.S - unsigned long long division
- *
- * Copyright 2003-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPLv2 or later.
- */
-
-#include <linux/linkage.h>
-
-#define CARRY AC0
-
-#ifdef CONFIG_ARITHMETIC_OPS_L1
-.section .l1.text
-#else
-.text
-#endif
-
-
-ENTRY(___udivdi3)
- R3 = [SP + 12];
- [--SP] = (R7:4, P5:3);
-
- /* Attempt to use divide primitive first; these will handle
- ** most cases, and they're quick - avoids stalls incurred by
- ** testing for identities.
- */
-
- R4 = R2 | R3;
- CC = R4 == 0;
- IF CC JUMP .LDIV_BY_ZERO;
-
- R4.H = 0x8000;
- R4 >>>= 16; // R4 now 0xFFFF8000
- R5 = R0 | R2; // If either dividend or
- R4 = R5 & R4; // divisor have bits in
- CC = R4; // top half or low half's sign
- IF CC JUMP .LIDENTS; // bit, skip builtins.
- R4 = R1 | R3; // Also check top halves
- CC = R4;
- IF CC JUMP .LIDENTS;
-
- /* Can use the builtins. */
-
- AQ = CC; // Clear AQ (CC==0)
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- DIVQ(R0, R2);
- R0 = R0.L (Z);
- R1 = 0;
- (R7:4, P5:3) = [SP++];
- RTS;
-
-.LIDENTS:
- /* Test for common identities. Value to be returned is
- ** placed in R6,R7.
- */
- // Check for 0/y, return 0
- R4 = R0 | R1;
- CC = R4 == 0;
- IF CC JUMP .LRETURN_R0;
-
- // Check for x/x, return 1
- R6 = R0 - R2; // If x == y, then both R6 and R7 will be zero
- R7 = R1 - R3;
- R4 = R6 | R7; // making R4 zero.
- R6 += 1; // which would now make R6:R7==1.
- CC = R4 == 0;
- IF CC JUMP .LRETURN_IDENT;
-
- // Check for x/1, return x
- R6 = R0;
- R7 = R1;
- CC = R3 == 0;
- IF !CC JUMP .Lnexttest;
- CC = R2 == 1;
- IF CC JUMP .LRETURN_IDENT;
-
-.Lnexttest:
- R4.L = ONES R2; // check for div by power of two which
- R5.L = ONES R3; // can be done using a shift
- R6 = PACK (R5.L, R4.L);
- CC = R6 == 1;
- IF CC JUMP .Lpower_of_two_upper_zero;
- R6 = PACK (R4.L, R5.L);
- CC = R6 == 1;
- IF CC JUMP .Lpower_of_two_lower_zero;
-
- // Check for x < y, return 0
- R6 = 0;
- R7 = R6;
- CC = R1 < R3 (IU);
- IF CC JUMP .LRETURN_IDENT;
- CC = R1 == R3;
- IF !CC JUMP .Lno_idents;
- CC = R0 < R2 (IU);
- IF CC JUMP .LRETURN_IDENT;
-
-.Lno_idents: // Idents don't match. Go for the full operation
-
-
- // If X, or X and Y have high bit set, it'll affect the
- // results, so shift right one to stop this. Note: we've already
- // checked that X >= Y, so Y's msb won't be set unless X's
- // is.
-
- R4 = 0;
- CC = R1 < 0;
- IF !CC JUMP .Lx_msb_clear;
- CC = !CC; // 1 -> 0;
- R1 = ROT R1 BY -1; // Shift X >> 1
- R0 = ROT R0 BY -1; // lsb -> CC
- BITSET(R4,31); // to record only x msb was set
- CC = R3 < 0;
- IF !CC JUMP .Ly_msb_clear;
- CC = !CC;
- R3 = ROT R3 BY -1; // Shift Y >> 1
- R2 = ROT R2 BY -1;
- BITCLR(R4,31); // clear bit to record only x msb was set
-
-.Ly_msb_clear:
-.Lx_msb_clear:
- // Bit 31 in R4 indicates X msb set, but Y msb wasn't, and no bits
- // were lost, so we should shift result left by one.
-
- [--SP] = R4; // save for later
-
- // In the loop that follows, each iteration we add
- // either Y' or -Y' to the Remainder. We compute the
- // negated Y', and store, for convenience. Y' goes
- // into P0:P1, while -Y' goes into P2:P3.
-
- P0 = R2;
- P1 = R3;
- R2 = -R2;
- CC = CARRY;
- CC = !CC;
- R4 = CC;
- R3 = -R3;
- R3 = R3 - R4;
-
- R6 = 0; // remainder = 0
- R7 = R6;
-
- [--SP] = R2; P2 = SP;
- [--SP] = R3; P3 = SP;
- [--SP] = R6; P5 = SP; // AQ = 0
- [--SP] = P1;
-
- /* In the loop that follows, we use the following
- ** register assignments:
- ** R0,R1 X, workspace
- ** R2,R3 Y, workspace
- ** R4,R5 partial Div
- ** R6,R7 partial remainder
- ** P5 AQ
- ** The remainder and div form a 128-bit number, with
- ** the remainder in the high 64-bits.
- */
- R4 = R0; // Div = X'
- R5 = R1;
- R3 = 0;
-
- P4 = 64; // Iterate once per bit
- LSETUP(.LULST,.LULEND) LC0 = P4;
-.LULST:
- /* Shift Div and remainder up by one. The bit shifted
- ** out of the top of the quotient is shifted into the bottom
- ** of the remainder.
- */
- CC = R3;
- R4 = ROT R4 BY 1;
- R5 = ROT R5 BY 1 || // low q to high q
- R2 = [P5]; // load saved AQ
- R6 = ROT R6 BY 1 || // high q to low r
- R0 = [P2]; // load -Y'
- R7 = ROT R7 BY 1 || // low r to high r
- R1 = [P3];
-
- // Assume add -Y'
- CC = R2 < 0; // But if AQ is set...
- IF CC R0 = P0; // then add Y' instead
- IF CC R1 = P1;
-
- R6 = R6 + R0; // Rem += (Y' or -Y')
- CC = CARRY;
- R0 = CC;
- R7 = R7 + R1;
- R7 = R7 + R0 (NS) ||
- R1 = [SP];
- // Set the next AQ bit
- R1 = R7 ^ R1; // from Remainder and Y'
- R1 = R1 >> 31 || // Negate AQ's value, and
- [P5] = R1; // save next AQ
- BITTGL(R1, 0); // add neg AQ to the Div
-.LULEND: R4 = R4 + R1;
-
- R6 = [SP + 16];
-
- R0 = R4;
- R1 = R5;
- CC = BITTST(R6,30); // Just set CC=0
- R4 = ROT R0 BY 1; // but if we had to shift X,
- R5 = ROT R1 BY 1; // and didn't shift any bits out,
- CC = BITTST(R6,31); // then the result will be half as
- IF CC R0 = R4; // much as required, so shift left
- IF CC R1 = R5; // one space.
-
- SP += 20;
- (R7:4, P5:3) = [SP++];
- RTS;
-
-.Lpower_of_two:
- /* Y has a single bit set, which means it's a power of two.
- ** That means we can perform the division just by shifting
- ** X to the right the appropriate number of bits
- */
-
- /* signbits returns the number of sign bits, minus one.
- ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
- ** to shift right n-signbits spaces. It also means 0x80000000
- ** is a special case, because that *also* gives a signbits of 0
- */
-.Lpower_of_two_lower_zero:
- R7 = 0;
- R6 = R1 >> 31;
- CC = R3 < 0;
- IF CC JUMP .LRETURN_IDENT;
-
- R2.L = SIGNBITS R3;
- R2 = R2.L (Z);
- R2 += -62;
- (R7:4, P5:3) = [SP++];
- JUMP ___lshftli;
-
-.Lpower_of_two_upper_zero:
- CC = R2 < 0;
- IF CC JUMP .Lmaxint_shift;
-
- R2.L = SIGNBITS R2;
- R2 = R2.L (Z);
- R2 += -30;
- (R7:4, P5:3) = [SP++];
- JUMP ___lshftli;
-
-.Lmaxint_shift:
- R2 = -31;
- (R7:4, P5:3) = [SP++];
- JUMP ___lshftli;
-
-.LRETURN_IDENT:
- R0 = R6;
- R1 = R7;
-.LRETURN_R0:
- (R7:4, P5:3) = [SP++];
- RTS;
-.LDIV_BY_ZERO:
- R0 = ~R2;
- R1 = R0;
- (R7:4, P5:3) = [SP++];
- RTS;
-
-ENDPROC(___udivdi3)
-
-
-ENTRY(___lshftli)
- CC = R2 == 0;
- IF CC JUMP .Lfinished; // nothing to do
- CC = R2 < 0;
- IF CC JUMP .Lrshift;
- R3 = 64;
- CC = R2 < R3;
- IF !CC JUMP .Lretzero;
-
- // We're shifting left, and it's less than 64 bits, so
- // a valid result will be returned.
-
- R3 >>= 1; // R3 now 32
- CC = R2 < R3;
-
- IF !CC JUMP .Lzerohalf;
-
- // We're shifting left, between 1 and 31 bits, which means
- // some of the low half will be shifted into the high half.
- // Work out how much.
-
- R3 = R3 - R2;
-
- // Save that much data from the bottom half.
-
- P1 = R7;
- R7 = R0;
- R7 >>= R3;
-
- // Adjust both parts of the parameter.
-
- R0 <<= R2;
- R1 <<= R2;
-
- // And include the bits moved across.
-
- R1 = R1 | R7;
- R7 = P1;
- RTS;
-
-.Lzerohalf:
- // We're shifting left, between 32 and 63 bits, so the
- // bottom half will become zero, and the top half will
- // lose some bits. How many?
-
- R2 = R2 - R3; // N - 32
- R1 = LSHIFT R0 BY R2.L;
- R0 = R0 - R0;
- RTS;
-
-.Lretzero:
- R0 = R0 - R0;
- R1 = R0;
-.Lfinished:
- RTS;
-
-.Lrshift:
- // We're shifting right, but by how much?
- R2 = -R2;
- R3 = 64;
- CC = R2 < R3;
- IF !CC JUMP .Lretzero;
-
- // Shifting right less than 64 bits, so some result bits will
- // be retained.
-
- R3 >>= 1; // R3 now 32
- CC = R2 < R3;
- IF !CC JUMP .Lsignhalf;
-
- // Shifting right between 1 and 31 bits, so need to copy
- // data across words.
-
- P1 = R7;
- R3 = R3 - R2;
- R7 = R1;
- R7 <<= R3;
- R1 >>= R2;
- R0 >>= R2;
- R0 = R7 | R0;
- R7 = P1;
- RTS;
-
-.Lsignhalf:
- // Shifting right between 32 and 63 bits, so the top half
- // will become all zero-bits, and the bottom half is some
- // of the top half. But how much?
-
- R2 = R2 - R3;
- R0 = R1;
- R0 >>= R2;
- R1 = 0;
- RTS;
-
-ENDPROC(___lshftli)
if (BF52x)
+source "arch/blackfin/mach-bf527/boards/Kconfig"
+
menu "BF527 Specific Configuration"
comment "Alternative Multiplexing Scheme"
--- /dev/null
+choice
+ prompt "System type"
+ default BFIN527_EZKIT
+ help
+ Select your board!
+
+config BFIN527_EZKIT
+ bool "BF527-EZKIT"
+ help
+ BF527-EZKIT-LITE board support.
+
+endchoice
#
-# arch/blackfin/mach-bf532/boards/Makefile
+# arch/blackfin/mach-bf527/boards/Makefile
#
-obj-y += eth_mac.o
-obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
-
+obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
+++ /dev/null
-/*
- * arch/blackfin/mach-bf537/board/eth_mac.c
- *
- * Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/module.h>
-#include <asm/blackfin.h>
-
-#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP)
-
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC 0x203f0000
-
-void get_bf537_ether_addr(char *addr)
-{
- unsigned int flash_mac = (unsigned int) FLASH_MAC;
- *(u32 *)(&(addr[0])) = bfin_read32(flash_mac);
- flash_mac += 4;
- *(u16 *)(&(addr[4])) = bfin_read16(flash_mac);
-}
-
-#else
-
-/*
- * Provide MAC address function for other specific board setting
- */
-void get_bf537_ether_addr(char *addr)
-{
- printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__);
-}
-
-#endif
-
-EXPORT_SYMBOL(get_bf537_ether_addr);
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/nand.h>
+#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
};
#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+ {
+ .modalias = "wm8731",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5,
+ .controller_data = &spi_wm8731_chip_info,
+ .mode = SPI_MODE_0,
+ },
+#endif
};
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
}
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC 0x203f0000
+void bfin_get_ether_addr(char *addr)
+{
+ *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+ *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
if (BF533 || BF532 || BF531)
+source "arch/blackfin/mach-bf533/boards/Kconfig"
+
menu "BF533/2/1 Specific Configuration"
comment "Interrupt Priority Assignment"
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
*/
const char bfin_board_name[] = "HV Sistemas H8606";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE)
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
return 0;
}
-arch_initcall(H8606_init);
\ No newline at end of file
+arch_initcall(H8606_init);
--- /dev/null
+choice
+ prompt "System type"
+ default BFIN533_STAMP
+ help
+ Select your board!
+
+config BFIN533_EZKIT
+ bool "BF533-EZKIT"
+ help
+ BF533-EZKIT-LITE board support.
+
+config BFIN533_STAMP
+ bool "BF533-STAMP"
+ help
+ BF533-STAMP board support.
+
+config BFIN533_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF533"
+ depends on (BF533)
+ help
+ CM-BF533 support for EVAL- and DEV-Board.
+
+config H8606_HVSISTEMAS
+ bool "HV Sistemas H8606"
+ depends on (BF532)
+ help
+ HV Sistemas H8606 board support.
+
+config GENERIC_BF533_BOARD
+ bool "Generic"
+ help
+ Generic or Custom board support.
+
+endchoice
# arch/blackfin/mach-bf533/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
if (BF537 || BF534 || BF536)
+source "arch/blackfin/mach-bf537/boards/Kconfig"
+
menu "BF537 Specific Configuration"
comment "Interrupt Priority Assignment"
--- /dev/null
+choice
+ prompt "System type"
+ default BFIN537_STAMP
+ help
+ Select your board!
+
+config BFIN537_STAMP
+ bool "BF537-STAMP"
+ help
+ BF537-STAMP board support.
+
+config BFIN537_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF537"
+ depends on (BF537)
+ help
+ CM-BF537 support for EVAL- and DEV-Board.
+
+config PNAV10
+ bool "PNAV board"
+ depends on (BF537)
+ help
+ PNAV board support.
+
+config GENERIC_BF537_BOARD
+ bool "Generic"
+ help
+ Generic or Custom board support.
+
+endchoice
# arch/blackfin/mach-bf537/boards/Makefile
#
-obj-y += eth_mac.o
-obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
-obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
-obj-$(CONFIG_PNAV10) += pnav10.o
+obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
+obj-$(CONFIG_PNAV10) += pnav10.o
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
}
arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
+++ /dev/null
-/*
- * arch/blackfin/mach-bf537/board/eth_mac.c
- *
- * Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/module.h>
-#include <asm/blackfin.h>
-
-#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP)
-
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC 0x203f0000
-
-void get_bf537_ether_addr(char *addr)
-{
- unsigned int flash_mac = (unsigned int) FLASH_MAC;
- *(u32 *)(&(addr[0])) = bfin_read32(flash_mac);
- flash_mac += 4;
- *(u16 *)(&(addr[4])) = bfin_read16(flash_mac);
-}
-
-#else
-
-/*
- * Provide MAC address function for other specific board setting
- */
-void get_bf537_ether_addr(char *addr)
-{
- printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__);
-}
-
-#endif
-
-EXPORT_SYMBOL(get_bf537_ether_addr);
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
}
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
#include <linux/usb/sl811.h>
#include <linux/spi/ad7877.h>
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 1,
+ .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF2,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 5,
.controller_data = &spi_ad7877_chip_info,
},
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
}
arch_initcall(stamp_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#endif
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
};
#endif
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+static struct resource ax88180_resources[] = {
+ [0] = {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x8000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
+ },
+};
+
+static struct platform_device ax88180_device = {
+ .name = "ax88180",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ax88180_resources),
+ .resource = ax88180_resources,
+};
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- }, {
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
},
+#endif
};
static struct platform_device bfin_uart_device = {
&dm9000_device,
#endif
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+ &ax88180_device,
+#endif
+
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mac_device,
#endif
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
}
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC 0x203f0000
+void bfin_get_ether_addr(char *addr)
+{
+ *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+ *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
if (BF54x)
+source "arch/blackfin/mach-bf548/boards/Kconfig"
+
menu "BF548 Specific Configuration"
config DEB_DMA_URGENT
--- /dev/null
+choice
+ prompt "System type"
+ default BFIN548_EZKIT
+ help
+ Select your board!
+
+config BFIN548_EZKIT
+ bool "BF548-EZKIT"
+ help
+ BFIN548-EZKIT board support.
+
+endchoice
# arch/blackfin/mach-bf548/boards/Makefile
#
-obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
+#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 1,
+ .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
};
/* SPI controller data */
-static struct bfin5xx_spi_master bf54x_spi_master_info = {
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bf54x_spi_master0 = {
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
.dev = {
- .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
},
};
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
static struct platform_device bf54x_spi_master1 = {
.name = "bfin-spi",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
.resource = bfin_spi1_resource,
.dev = {
- .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
},
};
#endif /* spi master and devices */
.resource = bfin_twi0_resource,
};
+#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct resource bfin_twi1_resource[] = {
[0] = {
.start = TWI1_REGBASE,
.resource = bfin_twi1_resource,
};
#endif
+#endif
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
&i2c_bfin_twi0_device,
+#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
+#endif
};
static int __init stamp_init(void)
w[p2] = r0;
ssync;
+ p2.h = hi(EBIU_MBSCTL);
+ p2.l = lo(EBIU_MBSCTL);
+ r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
+ r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_MODE);
+ p2.l = lo(EBIU_MODE);
+ r0.h = hi(CONFIG_EBIU_MODEVAL);
+ r0.l = lo(CONFIG_EBIU_MODEVAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_FCTL);
+ p2.l = lo(EBIU_FCTL);
+ r0.h = hi(CONFIG_EBIU_FCTLVAL);
+ r0.l = lo(CONFIG_EBIU_FCTLVAL);
+ [p2] = r0;
+ ssync;
+
/* This section keeps the processor in supervisor mode
* during kernel boot. Switches to user mode at end of boot.
* See page 3-9 of Hardware Reference manual for documentation.
-if BF561
+if (BF561)
+
+source "arch/blackfin/mach-bf561/boards/Kconfig"
menu "BF561 Specific Configuration"
--- /dev/null
+choice
+ prompt "System type"
+ default BFIN561_EZKIT
+ help
+ Select your board!
+
+config BFIN561_EZKIT
+ bool "BF561-EZKIT"
+ help
+ BF561-EZKIT-LITE board support.
+
+config BFIN561_TEPLA
+ bool "BF561-TEPLA"
+ help
+ BF561-TEPLA board support.
+
+config BFIN561_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF561"
+ help
+ CM-BF561 support for EVAL- and DEV-Board.
+
+config GENERIC_BF561_BOARD
+ bool "Generic"
+ help
+ Generic or Custom board support.
+
+endchoice
# arch/blackfin/mach-bf561/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/usb_isp1362.h>
+#include <linux/usb/isp1362.h>
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
#include <linux/pata_platform.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
};
#endif
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+static struct resource ax88180_resources[] = {
+ [0] = {
+ .start = 0x2c000000,
+ .end = 0x2c000000 + 0x8000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
+ },
+};
+
+static struct platform_device ax88180_device = {
+ .name = "ax88180",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ax88180_resources),
+ .resource = ax88180_resources,
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bfin_spi0_device = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
+
+#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
+ &ax88180_device,
+#endif
+
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
#endif
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
}, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
} else
buf += sprintf(buf, "Data CPLB entry:\n");
- buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\n\tiCount\toCount\n");
+ buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n");
while (*p_addr != 0xffffffff) {
entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
/* ICPLB Miss Exception. We need to choose one of the
* currently-installed CPLBs, and replace it with one
* from the configuration table.
- */
+ */
P4.L = LO(ICPLB_FAULT_ADDR);
P4.H = HI(ICPLB_FAULT_ADDR);
/* See if failed address > start address */
CC = R4 <= R0(IU);
- IF !CC JUMP .Linext;
+ IF !CC JUMP .Linext;
/* extract page size (17:16)*/
R3 = EXTRACT(R2, R1.L) (Z);
/* FAILED CASES*/
.Lno_page_in_table:
- ( R7:4,P5:3 ) = [SP++];
R0 = CPLB_NO_ADDR_MATCH;
- RTS;
+ JUMP .Lfail_ret;
+
.Lall_locked:
- ( R7:4,P5:3 ) = [SP++];
R0 = CPLB_NO_UNLOCKED;
- RTS;
+ JUMP .Lfail_ret;
+
.Lprot_violation:
- ( R7:4,P5:3 ) = [SP++];
R0 = CPLB_PROT_VIOL;
+
+.Lfail_ret:
+ /* Make sure we turn protection/cache back on, even in the failing case */
+ BITSET(R5,ENICPLB_P);
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:4,P5:3 ) = [SP++];
RTS;
.Ldcplb_write:
* after a timer-interrupt and after each system call.
*/
-
+#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/unistd.h>
#include <asm/blackfin.h>
* This one does not lower the level to IRQ5, and thus can be used to
* patch up CPLB misses on the kernel stack.
*/
-ENTRY(_ex_dcplb)
#if ANOMALY_05000261
+#define _ex_dviol _ex_workaround_261
+#define _ex_dmiss _ex_workaround_261
+#define _ex_dmult _ex_workaround_261
+
+ENTRY(_ex_workaround_261)
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
* handle it.
*/
+ P4 = R7; /* Store EXCAUSE */
p5.l = _last_cplb_fault_retx;
p5.h = _last_cplb_fault_retx;
r7 = [p5];
r6 = retx;
[p5] = r6;
cc = r6 == r7;
- if !cc jump _return_from_exception;
+ if !cc jump _bfin_return_from_exception;
/* fall through */
+ R7 = P4;
+ R6 = 0x26; /* Data CPLB Miss */
+ cc = R6 == R7;
+ if cc jump _ex_dcplb_miss (BP);
+ /* Handle 0x23 Data CPLB Protection Violation
+ * and Data CPLB Multiple Hits - Linux Trap Zero
+ */
+ jump _ex_trap_c;
+ENDPROC(_ex_workaround_261)
+
+#else
+#define _ex_dviol _ex_trap_c
+#define _ex_dmiss _ex_dcplb_miss
+#define _ex_dmult _ex_trap_c
#endif
-ENDPROC(_ex_dcplb)
-ENTRY(_ex_icplb)
+ENTRY(_ex_dcplb_miss)
+ENTRY(_ex_icplb_miss)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SAVE_ALL_SYS
RESTORE_ALL_SYS
SP = EX_SCRATCH_REG;
rtx;
-ENDPROC(_ex_icplb)
+ENDPROC(_ex_icplb_miss)
ENTRY(_ex_syscall)
DEBUG_START_HWTRACE(p5, r7)
r7 = retx;
r6 = reti;
cc = r7 == r6;
- if cc jump _return_from_exception
+ if cc jump _bfin_return_from_exception
r7 = syscfg;
bitclr (r7, 0);
syscfg = R7;
r7 = [p4];
cc = r6 == r7;
if !cc jump _ex_trap_c;
+ENDPROC(_ex_single_step)
-ENTRY(_return_from_exception)
+ENTRY(_bfin_return_from_exception)
DEBUG_START_HWTRACE(p5, r7)
#if ANOMALY_05000257
R7=LC0;
ASTAT = [sp++];
sp = EX_SCRATCH_REG;
rtx;
-ENDPROC(_ex_soft_bp)
+ENDPROC(_bfin_return_from_exception)
ENTRY(_handle_bad_cplb)
/* To get here, we just tried and failed to change a CPLB
LC0 = [sp++];
P2 = [sp++];
P3 = [sp++];
- jump _return_from_exception;
+ jump _bfin_return_from_exception;
ENDPROC(_ex_trace_buff_full)
#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
#if CONFIG_EARLY_PRINTK
-.section .init.text
+__INIT
ENTRY(_early_trap)
SAVE_ALL_SYS
trace_buffer_stop(p0,r0);
call _early_trap_c;
SP += 12;
ENDPROC(_early_trap)
+__FINIT
#endif /* CONFIG_EARLY_PRINTK */
/*
#else
.data
#endif
+
ENTRY(_ex_table)
/* entry for each EXCAUSE[5:0]
* This table must be in sync with the table in ./kernel/traps.c
.long _ex_trap_c /* 0x20 - Reserved */
.long _ex_trap_c /* 0x21 - Undefined Instruction */
.long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
- .long _ex_dcplb /* 0x23 - Data CPLB Protection Violation */
+ .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */
.long _ex_trap_c /* 0x24 - Data access misaligned */
.long _ex_trap_c /* 0x25 - Unrecoverable Event */
- .long _ex_dcplb /* 0x26 - Data CPLB Miss */
- .long _ex_trap_c /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
+ .long _ex_dmiss /* 0x26 - Data CPLB Miss */
+ .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
.long _ex_trap_c /* 0x28 - Emulation Watchpoint */
.long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
.long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
- .long _ex_icplb /* 0x2B - Instruction CPLB protection Violation */
- .long _ex_icplb /* 0x2C - Instruction CPLB miss */
+ .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */
+ .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */
.long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
.long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
.long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
#include <asm/blackfin.h>
#include <asm/mach/irq.h>
-#include <linux/autoconf.h>
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
.unmask = bf561_internal_unmask_irq,
};
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
}
-#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
-
void __init init_exception_vectors(void)
{
SSYNC();
set_irq_chip(irq, &bf561_core_irqchip);
else
set_irq_chip(irq, &bf561_internal_irqchip);
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+
if ((irq != IRQ_PROG0_INTA) &&
- (irq != IRQ_PROG1_INTA) && (irq != IRQ_PROG2_INTA)) {
-#endif
+ (irq != IRQ_PROG1_INTA) &&
+ (irq != IRQ_PROG2_INTA))
set_irq_handler(irq, handle_simple_irq);
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
- } else {
+ else
set_irq_chained_handler(irq, bf561_demux_gpio_irq);
- }
-#endif
-
}
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
set_irq_chip(irq, &bf561_gpio_irqchip);
/* if configured as edge, then will be changed to do_edge_IRQ */
set_irq_handler(irq, handle_level_irq);
}
-#endif
+
bfin_write_IMASK(0);
CSYNC();
ilat = bfin_read_ILAT();
}
#ifdef CONFIG_DO_IRQ_L1
-void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+__attribute__((l1_text))
#endif
-
void do_irq(int vec, struct pt_regs *fp)
{
if (vec == EVT_IVTMR_P) {
}
#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
-#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x)
+#if !defined(CONFIG_BF54x)
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
}
}
-#else /* CONFIG_IRQCHIP_DEMUX_GPIO */
+#else /* CONFIG_BF54x */
#define NR_PINT_SYS_IRQS 4
#define NR_PINT_BITS 32
}
}
-#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+#endif
void __init init_exception_vectors(void)
{
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-#ifdef CONFIG_BF54x
+# ifdef CONFIG_BF54x
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-#endif
+# endif
#else
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
bfin_write_SIC_IWR(IWR_ENABLE_ALL);
local_irq_disable();
-#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
-#ifdef CONFIG_PINTx_REASSIGN
+#ifdef CONFIG_BF54x
+# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
pint[1]->assign = CONFIG_PINT1_ASSIGN;
pint[2]->assign = CONFIG_PINT2_ASSIGN;
pint[3]->assign = CONFIG_PINT3_ASSIGN;
-#endif
+# endif
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
init_pint_lut();
#endif
#endif
switch (irq) {
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#if defined(CONFIG_BF53x)
case IRQ_PROG_INTA:
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
break;
-#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
case IRQ_MAC_RX:
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
break;
-#endif
+# endif
#elif defined(CONFIG_BF54x)
case IRQ_PINT0:
set_irq_chained_handler(irq,
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
break;
-#endif
#endif
default:
set_irq_handler(irq, handle_simple_irq);
}
#endif
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#ifndef CONFIG_BF54x
for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
#else
/* if configured as edge, then will be changed to do_edge_IRQ */
set_irq_handler(irq, handle_level_irq);
}
-#endif
+
bfin_write_IMASK(0);
CSYNC();
ilat = bfin_read_ILAT();
}
#ifdef CONFIG_DO_IRQ_L1
-void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text));
+__attribute__((l1_text))
#endif
-
void do_irq(int vec, struct pt_regs *fp)
{
if (vec == EVT_IVTMR_P) {
case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG HWC_x2);
+ printk(KERN_EMERG HWC_x2(KERN_EMERG));
break;
case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */
info.si_code = BUS_ADRERR;
sig = SIGBUS;
- printk(KERN_EMERG HWC_x3);
+ printk(KERN_EMERG HWC_x3(KERN_EMERG));
break;
case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */
- printk(KERN_EMERG HWC_x12);
+ printk(KERN_EMERG HWC_x12(KERN_EMERG));
break;
case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */
- printk(KERN_EMERG HWC_x18);
+ printk(KERN_EMERG HWC_x18(KERN_EMERG));
break;
default: /* Reserved */
- printk(KERN_EMERG HWC_default);
+ printk(KERN_EMERG HWC_default(KERN_EMERG));
break;
}
}
regs->ipend = bfin_read_IPEND();
- dump_bfin_regs(regs, (void *)regs->pc);
+ dump_bfin_process(regs);
+ dump_bfin_mem((void *)regs->pc);
+ show_regs(regs);
if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */
panic("Unhandled IRQ or exceptions!\n");
else { /* in userspace */
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/autoconf.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
loopback. Not all products are able to do this in software only.
Axis 2400/2401 must disable receiver.
-config ETRAX_IDE
- bool "ATA/IDE support"
- select IDE
- select BLK_DEV_IDE
- select BLK_DEV_IDEDISK
- select BLK_DEV_IDECD
- select BLK_DEV_IDEDMA
- select IDE_GENERIC
- help
- Enable this to get support for ATA/IDE.
- You can't use parallel ports or SCSI ports
- at the same time.
-
-
-config ETRAX_IDE_DELAY
- int "Delay for drives to regain consciousness"
- depends on ETRAX_IDE
- default 15
- help
- Number of seconds to wait for IDE drives to spin up after an IDE
- reset.
-choice
- prompt "IDE reset pin"
- depends on ETRAX_IDE
- default ETRAX_IDE_PB7_RESET
-
-config ETRAX_IDE_PB7_RESET
- bool "Port_PB_Bit_7"
- help
- IDE reset on pin 7 on port B
-
-config ETRAX_IDE_G27_RESET
- bool "Port_G_Bit_27"
- help
- IDE reset on pin 27 on port G
-
-endchoice
-
-
config ETRAX_USB_HOST
bool "USB host"
select USB
that a user can change the value on using ioctl's.
Bit set = changeable.
-config ETRAX_IDE
- bool "ATA/IDE support"
- depends on ETRAX_ARCH_V32
- select IDE
- select BLK_DEV_IDE
- select BLK_DEV_IDEDISK
- select BLK_DEV_IDECD
- select BLK_DEV_IDEDMA
- select IDE_GENERIC
- help
- Enables the ETRAX IDE driver.
-
config ETRAX_CARDBUS
bool "Cardbus support"
depends on ETRAX_ARCH_V32
# entry point for Break Exceptions/Interrupts
#
###############################################################################
- .text
+ .section .text.break
.balign 4
.globl __entry_break
__entry_break:
#define nr_syscalls ((syscall_table_size)/4)
- .text
+ .section .text.entry
.balign 4
.macro LEDS val
*(.data.init_task)
}
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(L1_CACHE_BYTES);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
.trap : {
/* trap table management - read entry-table.S before modifying */
. = ALIGN(8192);
*(.trap.break)
}
- . = ALIGN(4096);
- .data.page_aligned : { *(.data.idt) }
-
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
/* Text and read-only data */
. = ALIGN(4);
_text = .;
_stext = .;
.text : {
- *(
- .text.start .text.*
+ *(.text.start)
+ *(.text.entry)
+ *(.text.break)
+ *(.text.tlbmiss)
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
#ifdef CONFIG_DEBUG_INFO
+ *(
.init.text
.exit.text
.exitcall.exit
-#endif
)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
+#endif
*(.fixup)
*(.gnu.warning)
*(.exitcall.exit)
#include <asm/highmem.h>
#include <asm/spr-regs.h>
- .section .text
+ .section .text.tlbmiss
.balign 4
.globl __entry_insn_mmu_miss
$(Q)$(MAKE) $(build)=$(boot) $@
unwcheck: vmlinux
- -$(Q)READELF=$(READELF) $(srctree)/arch/ia64/scripts/unwcheck.py $<
+ -$(Q)READELF=$(READELF) python $(srctree)/arch/ia64/scripts/unwcheck.py $<
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
LDFLAGS_bootloader = -static -T
$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \
- lib/lib.a arch/ia64/lib/lib.a FORCE
+ lib/lib.a arch/ia64/lib/built-in.o arch/ia64/lib/lib.a FORCE
$(call if_changed,ld)
.sdata : { *(.sdata) }
_edata = .;
- _bss = .;
+ __bss_start = .;
.sbss : { *(.sbss) *(.scommon) }
.bss : { *(.bss) *(COMMON) }
. = ALIGN(64 / 8);
+ __bss_stop = .;
_end = . ;
/* Stabs debugging sections. */
lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer;
if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) ||
- (!lsapic->lapic_flags & ACPI_MADT_ENABLED)) {
+ (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))) {
kfree(buffer.pointer);
return -EINVAL;
}
continue;
}
- if (md->num_pages << EFI_PAGE_SHIFT > IA64_GRANULE_SIZE)
+ if (efi_md_size(md) > IA64_GRANULE_SIZE)
panic("Woah! PAL code size bigger than a granule!");
#if EFI_DEBUG
printk(KERN_INFO "CPU %d: mapping PAL code [0x%lx-0x%lx) into [0x%lx-0x%lx)\n",
smp_processor_id(), md->phys_addr,
- md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
+ md->phys_addr + efi_md_size(md),
vaddr & mask, (vaddr & mask) + IA64_GRANULE_SIZE);
#endif
return __va(md->phys_addr);
md = p;
printk("mem%02u: type=%u, attr=0x%lx, range=[0x%016lx-0x%016lx) (%luMB)\n",
i, md->type, md->attribute, md->phys_addr,
- md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
+ md->phys_addr + efi_md_size(md),
md->num_pages >> (20 - EFI_PAGE_SHIFT));
}
}
for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
md = p;
- if (phys_addr - md->phys_addr < (md->num_pages << EFI_PAGE_SHIFT))
+ if (phys_addr - md->phys_addr < efi_md_size(md))
return md;
}
return NULL;
res->name = name;
res->start = md->phys_addr;
- res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+ res->end = md->phys_addr + efi_md_size(md) - 1;
res->flags = flags;
if (insert_resource(&iomem_resource, res) < 0)
* the dynamic symbol table et al. If this amount is insufficient,
* ld -shared will barf. Just increase it here.
*/
- . = GATE_ADDR + 0x500;
+ . = GATE_ADDR + 0x600;
.data.patch : {
__start_gate_mckinley_e9_patchlist = .;
EXPORT_SYMBOL(__moddi3);
EXPORT_SYMBOL(__umoddi3);
+#include <asm/page.h>
+EXPORT_SYMBOL(copy_page);
+
#if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE)
extern void xor_ia64_2(void);
extern void xor_ia64_3(void);
return -1;
}
-/*
- * Translate GSI number to the corresponding IA-64 interrupt vector. If no
- * entry exists, return -1.
- */
-inline int
-gsi_to_vector (unsigned int gsi)
-{
- int irq = __gsi_to_irq(gsi);
- if (check_irq_used(irq) < 0)
- return -1;
- return irq_to_vector(irq);
-}
-
int
gsi_to_irq (unsigned int gsi)
{
#define iosapic_disable_level_irq mask_irq
#define iosapic_ack_level_irq nop
-struct irq_chip irq_type_iosapic_level = {
+static struct irq_chip irq_type_iosapic_level = {
.name = "IO-SAPIC-level",
.startup = iosapic_startup_level_irq,
.shutdown = iosapic_shutdown_level_irq,
#define iosapic_disable_edge_irq nop
#define iosapic_end_edge_irq nop
-struct irq_chip irq_type_iosapic_edge = {
+static struct irq_chip irq_type_iosapic_edge = {
.name = "IO-SAPIC-edge",
.startup = iosapic_startup_edge_irq,
.shutdown = iosapic_disable_edge_irq,
.set_affinity = iosapic_set_affinity
};
-unsigned int
+static unsigned int
iosapic_version (char __iomem *addr)
{
/*
case ACPI_INTERRUPT_CPEI:
irq = vector = IA64_CPE_VECTOR;
BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL));
- delivery = IOSAPIC_LOWEST_PRIORITY;
+ delivery = IOSAPIC_FIXED;
mask = 1;
break;
default:
qp = kprobe_inst & 0x3f;
if (is_cmp_ctype_unc_inst(template, slot, major_opcode, kprobe_inst)) {
if (slot == 1 && qp) {
- printk(KERN_WARNING "Kprobes on cmp unc"
- "instruction on slot 1 at <0x%lx>"
+ printk(KERN_WARNING "Kprobes on cmp unc "
+ "instruction on slot 1 at <0x%lx> "
"is not supported\n", addr);
return -EINVAL;
* bit 12 to be equal to 1
*/
if (slot == 1 && qp) {
- printk(KERN_WARNING "Kprobes on test bit"
- "instruction on slot at <0x%lx>"
+ printk(KERN_WARNING "Kprobes on test bit "
+ "instruction on slot at <0x%lx> "
"is not supported\n", addr);
return -EINVAL;
}
*/
int x6=(kprobe_inst >> 27) & 0x3F;
if ((x6 == 0x10) || (x6 == 0x11)) {
- printk(KERN_WARNING "Kprobes on"
+ printk(KERN_WARNING "Kprobes on "
"Indirect Predict is not supported\n");
return -EINVAL;
}
* real return address, and all the rest will point to
* kretprobe_trampoline
*/
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ regs->cr_iip = orig_ret_address;
+
hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
if (ri->task != current)
/* another task is sharing our hash bucket */
kretprobe_assert(ri, orig_ret_address, trampoline_address);
- regs->cr_iip = orig_ret_address;
-
reset_current_kprobe();
spin_unlock_irqrestore(&kretprobe_lock, flags);
preempt_enable_no_resched();
.name = "Kernel bss",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
-extern char _text[], _end[], _etext[], _edata[], _bss[];
unsigned long ia64_max_cacheline_size;
code_resource.end = ia64_tpa(_etext) - 1;
data_resource.start = ia64_tpa(_etext);
data_resource.end = ia64_tpa(_edata) - 1;
- bss_resource.start = ia64_tpa(_bss);
+ bss_resource.start = ia64_tpa(__bss_start);
bss_resource.end = ia64_tpa(_end) - 1;
efi_initialize_iomem_resources(&code_resource, &data_resource,
&bss_resource);
if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
struct ia64_psr *psr = ia64_psr(&scr->pt);
- __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
+ err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
psr->mfh = 0; /* drop signal handler's fph contents... */
preempt_disable();
if (psr->dfh)
setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
{
unsigned long flags = 0, ifs, cfm, nat;
- long err;
+ long err = 0;
ifs = scr->pt.cr_ifs;
ia64_flush_fph(current);
if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
flags |= IA64_SC_FLAG_FPH_VALID;
- __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
+ err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
}
nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
- err = __put_user(flags, &sc->sc_flags);
+ err |= __put_user(flags, &sc->sc_flags);
err |= __put_user(nat, &sc->sc_nat);
err |= PUT_SIGSET(mask, &sc->sc_mask);
err |= __put_user(cfm, &sc->sc_cfm);
.sdata : AT(ADDR(.sdata) - LOAD_OFFSET)
{ *(.sdata) *(.sdata1) *(.srdata) }
_edata = .;
- _bss = .;
+ __bss_start = .;
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET)
{ *(.sbss) *(.scommon) }
.bss : AT(ADDR(.bss) - LOAD_OFFSET)
{ *(.bss) *(COMMON) }
+ __bss_stop = .;
_end = .;
flush.o ip_fast_csum.o do_csum.o \
memset.o strlen.o xor.o
-lib-$(CONFIG_ITANIUM) += copy_page.o copy_user.o memcpy.o
-lib-$(CONFIG_MCKINLEY) += copy_page_mck.o memcpy_mck.o
+obj-$(CONFIG_ITANIUM) += copy_page.o copy_user.o memcpy.o
+obj-$(CONFIG_MCKINLEY) += copy_page_mck.o memcpy_mck.o
lib-$(CONFIG_PERFMON) += carta_random.o
AFLAGS___divdi3.o =
long status;
if ((status = ia64_pal_vm_page_size(&tr_pgbits, &purge.mask)) != 0) {
- printk(KERN_ERR "PAL_VM_PAGE_SIZE failed with status=%ld;"
+ printk(KERN_ERR "PAL_VM_PAGE_SIZE failed with status=%ld; "
"defaulting to architected purge page-sizes.\n", status);
purge.mask = 0x115557000UL;
}
if (controller->node >= num_online_nodes()) {
struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
- printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u"
+ printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u "
"L_IO=%lx L_MEM=%lx BASE=%lx\n",
b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
nasid = NASID_GET(bussoft->bs_base);
cnode = nasid_to_cnodeid(nasid);
if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) ||
- (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCE)) {
- /* TIO PCI Bridge: find nearest node with CPUs */
+ (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCE) ||
+ (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_PIC)) {
+ /* PCI Bridge: find nearest node with CPUs */
int e = sn_hwperf_get_nearest_node(cnode, NULL,
&near_cnode);
if (e < 0) {
near_cnode = (cnodeid_t)-1; /* use any node */
- printk(KERN_WARNING "pcibr_bus_fixup: failed "
- "to find near node with CPUs to TIO "
+ printk(KERN_WARNING "sn_io_late_init: failed "
+ "to find near node with CPUs for "
"node %d, err=%d\n", cnode, e);
}
PCI_CONTROLLER(bus)->node = near_cnode;
- } else if (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_PIC) {
- PCI_CONTROLLER(bus)->node = cnode;
}
}
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
- sigset_t saveset, newset;
+ sigset_t newset;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
if (copy_from_user(&newset, unewset, sizeof(newset)))
return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
+ sigdelsetmask(&newset, sigmask(SIGKILL)|sigmask(SIGSTOP));
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs->r0 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset))
- return regs->r0;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
asmlinkage int
.long sys_mq_getsetattr
.long sys_ni_syscall /* reserved for kexec */
.long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get /* 290 */
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages
+ .long sys_openat /* 295 */
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_fstatat64 /* 300 */
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat /* 305 */
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll
+ .long sys_unshare /* 310 */
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee /* 315 */
+ .long sys_vmsplice
+ .long sys_move_pages
+ .long sys_getcpu
+ .long sys_epoll_pwait
+ .long sys_utimensat /* 320 */
+ .long sys_signalfd
+ .long sys_timerfd
+ .long sys_eventfd
+ .long sys_fallocate
static int atari_keyb_done = 0;
-int __init atari_keyb_init(void)
+int atari_keyb_init(void)
{
if (atari_keyb_done)
return 0;
atari_keyb_done = 1;
return 0;
}
+EXPORT_SYMBOL_GPL(atari_keyb_init);
int atari_kbd_translate(unsigned char keycode, unsigned char *keycodep, char raw_mode)
{
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
+ select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config BCM47XX
bool "BCM47XX based boards"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
+ select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
select HW_HAS_PCI
bool "DECstations"
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select NO_IOPORT
select IRQ_CPU
select ARC32
select ARCH_MAY_HAVE_PC_FDC
select CEVT_R4K
+ select CSRC_R4K
select GENERIC_ISA_DMA
select IRQ_CPU
select I8253
config LASAT
bool "LASAT Networks platforms"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
bool "Lemote Fulong mini-PC"
select ARCH_SPARSEMEM_ENABLE
select CEVT_R4K
+ select CSRC_R4K
select SYS_HAS_CPU_LOONGSON2
select DMA_NONCOHERENT
select BOOT_ELF32
bool "MIPS Atlas board"
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select IRQ_CPU
config MIPS_SEAD
bool "MIPS SEAD board"
select CEVT_R4K
+ select CSRC_R4K
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MACH_VR41XX
bool "NEC VR4100 series based machines"
select CEVT_R4K
+ select CSRC_R4K
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
select CEVT_R4K
+ select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config QEMU
bool "Qemu"
select CEVT_R4K
+ select CSRC_R4K
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
select ARC32
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_EISA
select I8253
+ select I8259
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select ARC32
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select ZONE_DMA32 if 64BIT
config SIBYTE_LITTLESUR
bool "Sibyte BCM91250C2-LittleSur"
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select ZONE_DMA32 if 64BIT
config SNI_RM
bool "SNI RM200/300/400"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select HW_HAS_EISA
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
select CEVT_R4K
+ select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
select CEVT_R4K
+ select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
config WR_PPMC
bool "Wind River PPMC board"
select CEVT_R4K
+ select CSRC_R4K
select IRQ_CPU
select BOOT_ELF32
select DMA_NONCOHERENT
bool
default n
+config ARCH_SUPPORTS_OPROFILE
+ bool
+ default y if !MIPS_MT_SMTC
+
config GENERIC_FIND_NEXT_BIT
bool
default y
config CSRC_BCM1480
bool
+config CSRC_R4K
+ bool
+
config CSRC_SB1250
bool
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
config ARCH_SPARSEMEM_ENABLE
bool
select SPARSEMEM_STATIC
config PCSPEAKER
bool
+config ZONE_DMA32
+ bool
+
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
bool
select 64BIT_PHYS_ADDR
select CEVT_R4K
+ select CSRC_R4K
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
intstat = dbdma_gptr->ddma_intstat;
au_sync();
- chan_index = ffs(intstat);
+ chan_index = __ffs(intstat);
ctp = chan_tab_ptr[chan_index];
cp = ctp->chan_ptr;
return;
}
#endif
- bit = ffs(intc0_req0);
+ bit = __ffs(intc0_req0);
intc0_req0 &= ~(1 << bit);
- do_IRQ(MIPS_CPU_IRQ_BASE + bit);
+ do_IRQ(AU1000_INTC0_INT_BASE + bit);
}
if (!intc0_req1)
return;
- bit = ffs(intc0_req1);
+ bit = __ffs(intc0_req1);
intc0_req1 &= ~(1 << bit);
- do_IRQ(bit);
+ do_IRQ(AU1000_INTC0_INT_BASE + bit);
}
if (!intc1_req0)
return;
- bit = ffs(intc1_req0);
+ bit = __ffs(intc1_req0);
intc1_req0 &= ~(1 << bit);
- do_IRQ(MIPS_CPU_IRQ_BASE + 32 + bit);
+ do_IRQ(AU1000_INTC1_INT_BASE + bit);
}
if (!intc1_req1)
return;
- bit = ffs(intc1_req1);
+ bit = __ffs(intc1_req1);
intc1_req1 &= ~(1 << bit);
- do_IRQ(MIPS_CPU_IRQ_BASE + 32 + bit);
+ do_IRQ(AU1000_INTC1_INT_BASE + bit);
}
asmlinkage void plat_irq_dispatch(void)
bcsr->int_status = bisr;
for( ; bisr; bisr &= (bisr-1) )
{
- extirq_nr = PB1200_INT_BEGIN + ffs(bisr);
+ extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
}
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_BCM1480=y
+CONFIG_CSRC_BCM1480=y
CONFIG_DMA_COHERENT=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
#
# CPU selection
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_CEVT_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
#
# CPU selection
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_MMU=y
+CONFIG_I8253=y
#
# PCCARD (PCMCIA/CardBus) support
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
+obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_SMP_UP) += smp-up.o
obj-$(CONFIG_MIPS_MT) += mips-mt.o
obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o
return 1;
}
-void __cpuinit mips_clockevent_init(void)
+int __cpuinit mips_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
unsigned int irq;
if (!cpu_has_counter || !mips_hpt_frequency)
- return;
+ return -ENXIO;
#ifdef CONFIG_MIPS_MT_SMTC
setup_smtc_dummy_clockevent_device();
* device.
*/
if (cpu)
- return;
+ return 0;
#endif
if (!c0_compare_int_usable())
- return;
+ return -ENXIO;
/*
* With vectored interrupts things are getting platform specific.
clockevents_register_device(cd);
- if (!cp0_timer_irq_installed)
- return;
+ if (cp0_timer_irq_installed)
+ return 0;
cp0_timer_irq_installed = 1;
#else
setup_irq(irq, &c0_compare_irqaction);
#endif
+
+ return 0;
}
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/time.h>
+
+static cycle_t c0_hpt_read(void)
+{
+ return read_c0_count();
+}
+
+static struct clocksource clocksource_mips = {
+ .name = "MIPS",
+ .read = c0_hpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init init_mips_clocksource(void)
+{
+ /* Calclate a somewhat reasonable rating value */
+ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+
+ clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+
+ clocksource_register(&clocksource_mips);
+}
static void __init bootmem_init(void)
{
- unsigned long reserved_end;
+ unsigned long init_begin, reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
int i;
*/
bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart,
min_low_pfn, max_low_pfn);
+
+
+ init_begin = PFN_UP(__pa_symbol(&__init_begin));
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ unsigned long start, end;
+
+ start = PFN_UP(boot_mem_map.map[i].addr);
+ end = PFN_DOWN(boot_mem_map.map[i].addr
+ + boot_mem_map.map[i].size);
+
+ if (start <= init_begin)
+ start = init_begin;
+ if (start >= end)
+ continue;
+
+#ifndef CONFIG_HIGHMEM
+ if (end > max_low_pfn)
+ end = max_low_pfn;
+
+ /*
+ * ... finally, is the area going away?
+ */
+ if (end <= start)
+ continue;
+#endif
+
+ add_active_range(0, start, end);
+ }
+
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Symmetric Uniprocessor (TM) Support
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+/*
+ * Send inter-processor interrupt
+ */
+void up_send_ipi_single(int cpu, unsigned int action)
+{
+ panic(KERN_ERR "%s called", __func__);
+}
+
+static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+ panic(KERN_ERR "%s called", __func__);
+}
+
+/*
+ * After we've done initial boot, this function is called to allow the
+ * board code to clean up state, if needed
+ */
+void __cpuinit up_init_secondary(void)
+{
+}
+
+void __cpuinit up_smp_finish(void)
+{
+}
+
+/* Hook for after all CPUs are online */
+void up_cpus_done(void)
+{
+}
+
+/*
+ * Firmware CPU startup hook
+ */
+void __cpuinit up_boot_secondary(int cpu, struct task_struct *idle)
+{
+}
+
+void __init up_smp_setup(void)
+{
+}
+
+void __init up_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops up_smp_ops = {
+ .send_ipi_single = up_send_ipi_single,
+ .send_ipi_mask = up_send_ipi_mask,
+ .init_secondary = up_init_secondary,
+ .smp_finish = up_smp_finish,
+ .cpus_done = up_cpus_done,
+ .boot_secondary = up_boot_secondary,
+ .smp_setup = up_smp_setup,
+ .prepare_cpus = up_prepare_cpus,
+};
return rtc_mips_set_mmss(now.tv_sec);
}
-/*
- * High precision timer functions for a R4k-compatible timer.
- */
-static cycle_t c0_hpt_read(void)
-{
- return read_c0_count();
-}
-
int (*mips_timer_state)(void);
int null_perf_irq(void)
unsigned int mips_hpt_frequency;
-static struct clocksource clocksource_mips = {
- .name = "MIPS",
- .read = c0_hpt_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static unsigned int __init calibrate_hpt(void)
-{
- cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
-
- const int loops = HZ / 10;
- int log_2_loops = 0;
- int i;
-
- /*
- * We want to calibrate for 0.1s, but to avoid a 64-bit
- * division we round the number of loops up to the nearest
- * power of 2.
- */
- while (loops > 1 << log_2_loops)
- log_2_loops++;
- i = 1 << log_2_loops;
-
- /*
- * Wait for a rising edge of the timer interrupt.
- */
- while (mips_timer_state());
- while (!mips_timer_state());
-
- /*
- * Now see how many high precision timer ticks happen
- * during the calculated number of periods between timer
- * interrupts.
- */
- hpt_start = clocksource_mips.read();
- do {
- while (mips_timer_state());
- while (!mips_timer_state());
- } while (--i);
- hpt_end = clocksource_mips.read();
-
- hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask;
- hz = HZ;
- frequency = hpt_count * hz;
-
- return frequency >> log_2_loops;
-}
-
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
u64 temp;
cd->mult = (u32) temp;
}
-static void __init init_mips_clocksource(void)
-{
- /* Calclate a somewhat reasonable rating value */
- clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
-
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
-}
-
void __init __weak plat_time_init(void)
{
}
BUG();
}
+static __init int cpu_has_mfc0_count_bug(void)
+{
+ switch (current_cpu_type()) {
+ case CPU_R4000PC:
+ case CPU_R4000SC:
+ case CPU_R4000MC:
+ /*
+ * V3.0 is documented as suffering from the mfc0 from count bug.
+ * Afaik this is the last version of the R4000. Later versions
+ * were marketed as R4400.
+ */
+ return 1;
+
+ case CPU_R4400PC:
+ case CPU_R4400SC:
+ case CPU_R4400MC:
+ /*
+ * The published errata for the R4400 upto 3.0 say the CPU
+ * has the mfc0 from count bug.
+ */
+ if ((current_cpu_data.processor_id & 0xff) <= 0x30)
+ return 1;
+
+ /*
+ * I don't have erratas for newer R4400 so be paranoid.
+ */
+ return 1;
+ }
+
+ return 0;
+}
+
void __init time_init(void)
{
plat_time_init();
- if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) {
- /* We know counter frequency. Or we can get it. */
- if (!mips_hpt_frequency)
- mips_hpt_frequency = calibrate_hpt();
-
- /* Report the high precision timer rate for a reference. */
- printk("Using %u.%03u MHz high precision timer.\n",
- ((mips_hpt_frequency + 500) / 1000) / 1000,
- ((mips_hpt_frequency + 500) / 1000) % 1000);
+ if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
init_mips_clocksource();
- }
-
- mips_clockevent_init();
}
*/
if (v != l->value) {
printk(KERN_DEBUG "VPE loader: "
- "apply_r_mips_lo16/hi16: "
+ "apply_r_mips_lo16/hi16: \t"
"inconsistent value information\n");
return -ENOEXEC;
}
break;
case SHN_MIPS_SCOMMON:
- printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON"
+ printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
"symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
sym[i].st_shndx);
// .sbss section
ax.rv.si = r;
va_start(ax.ap, op);
ieee754_xcpt(&ax);
+ va_end(ax.ap);
return ax.rv.si;
}
ax.rv.di = r;
va_start(ax.ap, op);
ieee754_xcpt(&ax);
+ va_end(ax.ap);
return ax.rv.di;
}
ax.rv.dp = r;
va_start(ax.ap, op);
ieee754_xcpt(&ax);
+ va_end(ax.ap);
return ax.rv.dp;
}
ax.rv.dp = r;
va_start(ax.ap, op);
ieee754_xcpt(&ax);
+ va_end(ax.ap);
return ax.rv.dp;
}
ax.rv.sp = r;
va_start(ax.ap, op);
ieee754_xcpt(&ax);
+ va_end(ax.ap);
return ax.rv.sp;
}
ax.rv.sp = r;
va_start(ax.ap, op);
ieee754_xcpt(&ax);
+ va_end(ax.ap);
return ax.rv.sp;
}
for (i = 0; i <= 14; i=i+2) {
if (*str)
- writel(*str++, display + i);
+ __raw_writel(*str++, display + i);
else
- writel(' ', display + i);
+ __raw_writel(' ', display + i);
}
}
void __init plat_time_init(void)
{
- unsigned int est_freq, flags;
-
- local_irq_save(flags);
+ unsigned int est_freq;
/* Set Data mode - binary. */
CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
(est_freq % 1000000) * 100 / 1000000);
cpu_khz = est_freq / 1000;
-
- local_irq_restore(flags);
}
current_cpu_type() == CPU_R12000);
}
+static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
+{
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
+
+#ifdef CONFIG_ZONE_DMA32
+ if (dev == NULL)
+ gfp |= __GFP_DMA;
+ else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
+ gfp |= __GFP_DMA;
+ else
+#endif
+#ifdef CONFIG_ZONE_DMA32
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
+ gfp |= __GFP_DMA32;
+ else
+#endif
+ ;
+
+ /* Don't invoke OOM killer */
+ gfp |= __GFP_NORETRY;
+
+ return gfp;
+}
+
void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
- /* ignore region specifiers */
- gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+ gfp = massage_gfp_flags(dev, gfp);
- if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
- gfp |= GFP_DMA;
ret = (void *) __get_free_pages(gfp, get_order(size));
if (ret != NULL) {
{
void *ret;
- /* ignore region specifiers */
- gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+ gfp = massage_gfp_flags(dev, gfp);
- if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
- gfp |= GFP_DMA;
ret = (void *) __get_free_pages(gfp, get_order(size));
if (ret) {
* so we can't guarantee allocations that must be
* within a tighter range than GFP_DMA..
*/
- if (mask < 0x00ffffff)
+ if (mask < DMA_BIT_MASK(24))
return 0;
return 1;
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-#ifndef CONFIG_FLATMEM
- unsigned long zholes_size[MAX_NR_ZONES] = { 0, };
- unsigned long i, j, pfn;
-#endif
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ unsigned long lastpfn;
pagetable_init();
kmap_coherent_init();
#ifdef CONFIG_ZONE_DMA
- if (min_low_pfn < MAX_DMA_PFN && MAX_DMA_PFN <= max_low_pfn) {
- zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
- zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
- } else if (max_low_pfn < MAX_DMA_PFN)
- zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
- else
+ max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
#endif
- zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
-
+#ifdef CONFIG_ZONE_DMA32
+ max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
+#endif
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+ lastpfn = max_low_pfn;
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+ lastpfn = highend_pfn;
- if (cpu_has_dc_aliases && zones_size[ZONE_HIGHMEM]) {
+ if (cpu_has_dc_aliases && max_low_pfn != highend_pfn) {
printk(KERN_WARNING "This processor doesn't support highmem."
- " %ldk highmem ignored\n", zones_size[ZONE_HIGHMEM]);
- zones_size[ZONE_HIGHMEM] = 0;
+ " %ldk highmem ignored\n",
+ (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
+ max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
+ lastpfn = max_low_pfn;
}
#endif
-#ifdef CONFIG_FLATMEM
- free_area_init(zones_size);
-#else
- pfn = min_low_pfn;
- for (i = 0; i < MAX_NR_ZONES; i++)
- for (j = 0; j < zones_size[i]; j++, pfn++)
- if (!page_is_ram(pfn))
- zholes_size[i]++;
- free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size);
-#endif
+ free_area_init_nodes(max_zone_pfns);
}
static struct kcore_list kcore_mem, kcore_vmalloc;
* Copyright (C) 2004, 05, 06 by Ralf Baechle
* Copyright (C) 2005 by MIPS Technologies, Inc.
*/
+#include <linux/cpumask.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#ifdef CONFIG_MIPS_MT_SMP
#define WHAT (M_TC_EN_VPE | M_PERFCTL_VPEID(smp_processor_id()))
#define vpe_id() smp_processor_id()
+
+/*
+ * The number of bits to shift to convert between counters per core and
+ * counters per VPE. There is no reasonable interface atm to obtain the
+ * number of VPEs used by Linux and in the 34K this number is fixed to two
+ * anyways so we hardcore a few things here for the moment. The way it's
+ * done here will ensure that oprofile VSMP kernel will run right on a lesser
+ * core like a 24K also or with maxcpus=1.
+ */
+static inline unsigned int vpe_shift(void)
+{
+ if (num_possible_cpus() > 1)
+ return 1;
+
+ return 0;
+}
+
#else
+
#define WHAT 0
#define vpe_id() 0
+
+static inline unsigned int vpe_shift(void)
+{
+ return 0;
+}
+
#endif
+static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
+{
+ return counters >> vpe_shift();
+}
+
+static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
+{
+ return counters << vpe_shift();
+}
+
#define __define_perf_accessors(r, n, np) \
\
static inline unsigned int r_c0_ ## r ## n(void) \
reset_counters(counters);
-#ifdef CONFIG_MIPS_MT_SMP
- counters >>= 1;
-#endif
+ counters = counters_total_to_per_cpu(counters);
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
static void mipsxx_exit(void)
{
int counters = op_model_mipsxx_ops.num_counters;
-#ifdef CONFIG_MIPS_MT_SMP
- counters <<= 1;
-#endif
+
+ counters = counters_per_cpu_to_total(counters);
reset_counters(counters);
perf_irq = null_perf_irq;
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- This is b0rked.
- return dev->irq;
+ if (pin == 0)
+ return -1;
+
+ return K_BCM1480_INT_PCI_INTA - 1 + pin;
}
/* Do platform specific device initialization at pci_enable_device() time */
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select CEVT_R4K
+ select CSRC_R4K
select IRQ_MSP_SLP
select HW_HAS_PCI
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select CEVT_R4K
+ select CSRC_R4K
select IRQ_MSP_SLP
select HW_HAS_PCI
mips_cpu_irq_init();
init_i8259_irqs();
- set_c0_status(0x8400);
+ set_c0_status(0x400);
}
#include <asm/sgi/ioc.h>
#include <asm/sgi/mc.h>
#include <asm/sgi/ip22.h>
+#include <asm/i8259.h>
/* I2 has four EISA slots. */
#define IP22_EISA_MAX_SLOTS 4
return IRQ_NONE;
}
-static void enable_eisa1_irq(unsigned int irq)
-{
- u8 mask;
-
- mask = inb(EISA_INT1_MASK);
- mask &= ~((u8) (1 << irq));
- outb(mask, EISA_INT1_MASK);
-}
-
-static unsigned int startup_eisa1_irq(unsigned int irq)
-{
- u8 edge;
-
- /* Only use edge interrupts for EISA */
-
- edge = inb(EISA_INT1_EDGE_LEVEL);
- edge &= ~((u8) (1 << irq));
- outb(edge, EISA_INT1_EDGE_LEVEL);
-
- enable_eisa1_irq(irq);
- return 0;
-}
-
-static void disable_eisa1_irq(unsigned int irq)
-{
- u8 mask;
-
- mask = inb(EISA_INT1_MASK);
- mask |= ((u8) (1 << irq));
- outb(mask, EISA_INT1_MASK);
-}
-
-static void mask_and_ack_eisa1_irq(unsigned int irq)
-{
- disable_eisa1_irq(irq);
-
- outb(0x20, EISA_INT1_CTRL);
-}
-
-static void end_eisa1_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_eisa1_irq(irq);
-}
-
-static struct irq_chip ip22_eisa1_irq_type = {
- .name = "IP22 EISA",
- .startup = startup_eisa1_irq,
- .ack = mask_and_ack_eisa1_irq,
- .mask = disable_eisa1_irq,
- .mask_ack = mask_and_ack_eisa1_irq,
- .unmask = enable_eisa1_irq,
- .end = end_eisa1_irq,
-};
-
-static void enable_eisa2_irq(unsigned int irq)
-{
- u8 mask;
-
- mask = inb(EISA_INT2_MASK);
- mask &= ~((u8) (1 << (irq - 8)));
- outb(mask, EISA_INT2_MASK);
-}
-
-static unsigned int startup_eisa2_irq(unsigned int irq)
-{
- u8 edge;
-
- /* Only use edge interrupts for EISA */
-
- edge = inb(EISA_INT2_EDGE_LEVEL);
- edge &= ~((u8) (1 << (irq - 8)));
- outb(edge, EISA_INT2_EDGE_LEVEL);
-
- enable_eisa2_irq(irq);
- return 0;
-}
-
-static void disable_eisa2_irq(unsigned int irq)
-{
- u8 mask;
-
- mask = inb(EISA_INT2_MASK);
- mask |= ((u8) (1 << (irq - 8)));
- outb(mask, EISA_INT2_MASK);
-}
-
-static void mask_and_ack_eisa2_irq(unsigned int irq)
-{
- disable_eisa2_irq(irq);
-
- outb(0x20, EISA_INT2_CTRL);
-}
-
-static void end_eisa2_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_eisa2_irq(irq);
-}
-
-static struct irq_chip ip22_eisa2_irq_type = {
- .name = "IP22 EISA",
- .startup = startup_eisa2_irq,
- .ack = mask_and_ack_eisa2_irq,
- .mask = disable_eisa2_irq,
- .mask_ack = mask_and_ack_eisa2_irq,
- .unmask = enable_eisa2_irq,
- .end = end_eisa2_irq,
-};
-
static struct irqaction eisa_action = {
.handler = ip22_eisa_intr,
.name = "EISA",
};
-static struct irqaction cascade_action = {
- .handler = no_action,
- .name = "EISA cascade",
-};
-
int __init ip22_eisa_init(void)
{
int i, c;
outb(1, EISA_EXT_NMI_RESET_CTRL);
udelay(50); /* Wait long enough for the dust to settle */
outb(0, EISA_EXT_NMI_RESET_CTRL);
- outb(0x11, EISA_INT1_CTRL);
- outb(0x11, EISA_INT2_CTRL);
- outb(0, EISA_INT1_MASK);
- outb(8, EISA_INT2_MASK);
- outb(4, EISA_INT1_MASK);
- outb(2, EISA_INT2_MASK);
- outb(1, EISA_INT1_MASK);
- outb(1, EISA_INT2_MASK);
- outb(0xfb, EISA_INT1_MASK);
- outb(0xff, EISA_INT2_MASK);
outb(0, EISA_DMA2_WRITE_SINGLE);
- for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
- if (i < (SGINT_EISA + 8))
- set_irq_chip(i, &ip22_eisa1_irq_type);
- else
- set_irq_chip(i, &ip22_eisa2_irq_type);
- }
+ init_i8259_irqs();
/* Cannot use request_irq because of kmalloc not being ready at such
* an early stage. Yes, I've been bitten... */
setup_irq(SGI_EISA_IRQ, &eisa_action);
- setup_irq(SGINT_EISA + 2, &cascade_action);
EISA_bus = 1;
return 0;
for (x=0; x<100000; x++) __asm__ __volatile__(""); })
#define eeprom_cs_on(ptr) ({ \
- *ptr &= ~EEPROM_DATO; \
- *ptr &= ~EEPROM_ECLK; \
- *ptr &= ~EEPROM_EPROT; \
- delay(); \
- *ptr |= EEPROM_CSEL; \
- *ptr |= EEPROM_ECLK; })
+ __raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr); \
+ __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr); \
+ __raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr); \
+ delay(); \
+ __raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr); \
+ __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
#define eeprom_cs_off(ptr) ({ \
- *ptr &= ~EEPROM_ECLK; \
- *ptr &= ~EEPROM_CSEL; \
- *ptr |= EEPROM_EPROT; \
- *ptr |= EEPROM_ECLK; })
+ __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr); \
+ __raw_writel(__raw_readl(ptr) & ~EEPROM_CSEL, ptr); \
+ __raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr); \
+ __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
#define BITS_IN_COMMAND 11
/*
ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND));
for (i = 0; i < BITS_IN_COMMAND; i++) {
if (ser_cmd & (1<<15)) /* if high order bit set */
- writel(readl(ctrl) | EEPROM_DATO, ctrl);
+ __raw_writel(__raw_readl(ctrl) | EEPROM_DATO, ctrl);
else
- writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
- writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
- writel(readl(ctrl) | EEPROM_ECLK, ctrl);
+ __raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl);
+ __raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl);
+ delay();
+ __raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl);
+ delay();
ser_cmd <<= 1;
}
/* see data sheet timing diagram */
- writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
+ __raw_writel(__raw_readl(ctrl) & ~EEPROM_DATO, ctrl);
}
unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
unsigned short res = 0;
int i;
- writel(readl(ctrl) & ~EEPROM_EPROT, ctrl);
+ __raw_writel(__raw_readl(ctrl) & ~EEPROM_EPROT, ctrl);
eeprom_cs_on(ctrl);
eeprom_cmd(ctrl, EEPROM_READ, reg);
/* clock the data ouf of serial mem */
for (i = 0; i < 16; i++) {
- writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
+ __raw_writel(__raw_readl(ctrl) & ~EEPROM_ECLK, ctrl);
delay();
- writel(readl(ctrl) | EEPROM_ECLK, ctrl);
+ __raw_writel(__raw_readl(ctrl) | EEPROM_ECLK, ctrl);
delay();
res <<= 1;
- if (readl(ctrl) & EEPROM_DATI)
+ if (__raw_readl(ctrl) & EEPROM_DATI)
res |= 1;
}
unsigned long sgi_gfxaddr;
EXPORT_SYMBOL_GPL(sgi_gfxaddr);
-/*
- * Stop-A is originally a Sun thing that isn't standard on IP22 so to avoid
- * accidents it's disabled by default on IP22.
- *
- * FIXME: provide a mechanism to change the value of stop_a_enabled.
- */
-int stop_a_enabled;
-
-void ip22_do_break(void)
-{
- if (!stop_a_enabled)
- return;
-
- printk("\n");
- ArcEnterInteractiveMode();
-}
-
-EXPORT_SYMBOL(ip22_do_break);
-
extern void ip22_be_init(void) __init;
void __init plat_mem_setup(void)
static void enable_macepci_irq(unsigned int irq)
{
- macepci_mask |= MACEPCI_CONTROL_INT(irq - 9);
+ macepci_mask |= MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ);
mace->pci.control = macepci_mask;
- crime_mask |= 1 << (irq - 1);
+ crime_mask |= 1 << (irq - CRIME_IRQ_BASE);
crime->imask = crime_mask;
}
static void disable_macepci_irq(unsigned int irq)
{
- crime_mask &= ~(1 << (irq - 1));
+ crime_mask &= ~(1 << (irq - CRIME_IRQ_BASE));
crime->imask = crime_mask;
flush_crime_bus();
- macepci_mask &= ~MACEPCI_CONTROL_INT(irq - 9);
+ macepci_mask &= ~MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ);
mace->pci.control = macepci_mask;
flush_mace_bus();
}
pr_debug("crime_int %08x enabled\n", crime_int);
crime_mask |= crime_int;
crime->imask = crime_mask;
- maceisa_mask |= 1 << (irq - 33);
+ maceisa_mask |= 1 << (irq - MACEISA_AUDIO_SW_IRQ);
mace->perif.ctrl.imask = maceisa_mask;
}
{
unsigned int crime_int = 0;
- maceisa_mask &= ~(1 << (irq - 33));
+ maceisa_mask &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
if (!(maceisa_mask & MACEISA_AUDIO_INT))
crime_int |= MACE_AUDIO_INT;
if (!(maceisa_mask & MACEISA_MISC_INT))
case MACEISA_SERIAL2_TDMAPR_IRQ:
/* edge triggered */
mace_int = mace->perif.ctrl.istat;
- mace_int &= ~(1 << (irq - 33));
+ mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
mace->perif.ctrl.istat = mace_int;
break;
}
static void enable_mace_irq(unsigned int irq)
{
- crime_mask |= 1 << (irq - 1);
+ unsigned int bit = irq - CRIME_IRQ_BASE;
+
+ crime_mask |= (1 << bit);
crime->imask = crime_mask;
}
static void disable_mace_irq(unsigned int irq)
{
- crime_mask &= ~(1 << (irq - 1));
+ unsigned int bit = irq - CRIME_IRQ_BASE;
+
+ crime_mask &= ~(1 << bit);
crime->imask = crime_mask;
flush_crime_bus();
}
mace->perif.ctrl.imask = 0;
mips_cpu_irq_init();
- for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) {
+ for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
switch (irq) {
case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
set_irq_chip(irq, &ip32_mace_interrupt);
config CASIO_E55
bool "CASIO CASSIOPEIA E-10/15/55/65"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
config IBM_WORKPAD
bool "IBM WorkPad z50"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
config NEC_CMBVR4133
bool "NEC CMB-VR4133"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
config TANBAC_TB022X
bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
config VICTOR_MPC30X
bool "Victor MP-C303/304"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
config ZAO_CAPCELLA
bool "ZAO Networks Capcella"
select CEVT_R4K
+ select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
kernel-$(CONFIG_HPUX) += hpux/
core-y += $(addprefix arch/parisc/, $(kernel-y))
-libs-y += arch/parisc/lib/
+libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/
/**
- * pdc_iodc_putc - Console character print using IODC.
- * @c: the character to output.
+ * pdc_iodc_print - Console print using IODC.
+ * @str: the string to output.
+ * @count: length of str
*
* Note that only these special chars are architected for console IODC io:
* BEL, BS, CR, and LF. Others are passed through.
* Since the HP console requires CR+LF to perform a 'newline', we translate
* "\n" to "\r\n".
*/
-void pdc_iodc_putc(unsigned char c)
+int pdc_iodc_print(unsigned char *str, unsigned count)
{
- /* XXX Should we spinlock posx usage */
- static int posx; /* for simple TAB-Simulation... */
- static int __attribute__((aligned(8))) iodc_retbuf[32];
- static char __attribute__((aligned(64))) iodc_dbuf[4096];
- unsigned int n;
+ /* XXX Should we spinlock posx usage */
+ static int posx; /* for simple TAB-Simulation... */
+ int __attribute__((aligned(8))) iodc_retbuf[32];
+ char __attribute__((aligned(64))) iodc_dbuf[4096];
+ unsigned int i;
unsigned long flags;
- switch (c) {
- case '\n':
- iodc_dbuf[0] = '\r';
- iodc_dbuf[1] = '\n';
- n = 2;
- posx = 0;
- break;
- case '\t':
- pdc_iodc_putc(' ');
- while (posx & 7) /* expand TAB */
- pdc_iodc_putc(' ');
- return; /* return since IODC can't handle this */
- case '\b':
- posx-=2; /* BS */
- default:
- iodc_dbuf[0] = c;
- n = 1;
- posx++;
- break;
- }
+ memset(iodc_dbuf, 0, 4096);
+ for (i = 0; i < count && i < 2048;) {
+ switch(str[i]) {
+ case '\n':
+ iodc_dbuf[i+0] = '\r';
+ iodc_dbuf[i+1] = '\n';
+ i += 2;
+ posx = 0;
+ break;
+ case '\t':
+ while (posx & 7) {
+ iodc_dbuf[i] = ' ';
+ i++, posx++;
+ }
+ break;
+ case '\b': /* BS */
+ posx -= 2;
+ default:
+ iodc_dbuf[i] = str[i];
+ i++, posx++;
+ break;
+ }
+ }
spin_lock_irqsave(&pdc_lock, flags);
real32_call(PAGE0->mem_cons.iodc_io,
(unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
- __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0);
+ __pa(iodc_retbuf), 0, __pa(iodc_dbuf), i, 0);
spin_unlock_irqrestore(&pdc_lock, flags);
-}
-/**
- * pdc_iodc_outc - Console character print using IODC (without conversions).
- * @c: the character to output.
- *
- * Write the character directly to the IODC console.
- */
-void pdc_iodc_outc(unsigned char c)
-{
- unsigned int n;
- unsigned long flags;
-
- /* fill buffer with one caracter and print it */
- static int __attribute__((aligned(8))) iodc_retbuf[32];
- static char __attribute__((aligned(64))) iodc_dbuf[4096];
-
- n = 1;
- iodc_dbuf[0] = c;
-
- spin_lock_irqsave(&pdc_lock, flags);
- real32_call(PAGE0->mem_cons.iodc_io,
- (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
- PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
- __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0);
- spin_unlock_irqrestore(&pdc_lock, flags);
+ return i;
}
/**
}
irq_desc[TIMER_IRQ].action = &timer_action;
- irq_desc[TIMER_IRQ].status |= IRQ_PER_CPU;
+ irq_desc[TIMER_IRQ].status = IRQ_PER_CPU;
#ifdef CONFIG_SMP
irq_desc[IPI_IRQ].action = &ipi_action;
irq_desc[IPI_IRQ].status = IRQ_PER_CPU;
EXPORT_SYMBOL($$divI_14);
EXPORT_SYMBOL($$divI_15);
+extern void __ashrdi3(void);
+extern void __ashldi3(void);
+extern void __lshrdi3(void);
+extern void __muldi3(void);
+
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__muldi3);
+
asmlinkage void * __canonicalize_funcptr_for_compare(void *);
EXPORT_SYMBOL(__canonicalize_funcptr_for_compare);
+#ifdef CONFIG_64BIT
+extern void __divdi3(void);
+extern void __udivdi3(void);
+extern void __umoddi3(void);
+extern void __moddi3(void);
+
+EXPORT_SYMBOL(__divdi3);
+EXPORT_SYMBOL(__udivdi3);
+EXPORT_SYMBOL(__umoddi3);
+EXPORT_SYMBOL(__moddi3);
+#endif
+
#ifndef CONFIG_64BIT
extern void $$dyncall(void);
EXPORT_SYMBOL($$dyncall);
static void pdc_console_write(struct console *co, const char *s, unsigned count)
{
- while(count--)
- pdc_iodc_putc(*s++);
-}
-
-void pdc_outc(unsigned char c)
-{
- pdc_iodc_outc(c);
+ pdc_iodc_print(s, count);
}
void pdc_printf(const char *fmt, ...)
len = vscnprintf(buf, sizeof(buf), fmt, args);
va_end(args);
- for (i = 0; i < len; i++)
- pdc_iodc_outc(buf[i]);
+ pdc_iodc_print(buf, len);
}
int pdc_console_poll_key(struct console *co)
lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o
-obj-y := libgcc/ milli/ iomap.o
+obj-y := iomap.o
+++ /dev/null
-obj-y := __ashldi3.o __ashrdi3.o __clzsi2.o __divdi3.o __divsi3.o \
- __lshrdi3.o __moddi3.o __modsi3.o __udivdi3.o \
- __udivmoddi4.o __udivmodsi4.o __udivsi3.o \
- __umoddi3.o __umodsi3.o __muldi3.o __umulsidi3.o
+++ /dev/null
-#include "libgcc.h"
-
-u64 __ashldi3(u64 v, int cnt)
-{
- int c = cnt & 31;
- u32 vl = (u32) v;
- u32 vh = (u32) (v >> 32);
-
- if (cnt & 32) {
- vh = (vl << c);
- vl = 0;
- } else {
- vh = (vh << c) + (vl >> (32 - c));
- vl = (vl << c);
- }
-
- return ((u64) vh << 32) + vl;
-}
-EXPORT_SYMBOL(__ashldi3);
+++ /dev/null
-#include "libgcc.h"
-
-u64 __ashrdi3(u64 v, int cnt)
-{
- int c = cnt & 31;
- u32 vl = (u32) v;
- u32 vh = (u32) (v >> 32);
-
- if (cnt & 32) {
- vl = ((s32) vh >> c);
- vh = (s32) vh >> 31;
- } else {
- vl = (vl >> c) + (vh << (32 - c));
- vh = ((s32) vh >> c);
- }
-
- return ((u64) vh << 32) + vl;
-}
-EXPORT_SYMBOL(__ashrdi3);
+++ /dev/null
-#include "libgcc.h"
-
-u32 __clzsi2(u32 v)
-{
- int p = 31;
-
- if (v & 0xffff0000) {
- p -= 16;
- v >>= 16;
- }
- if (v & 0xff00) {
- p -= 8;
- v >>= 8;
- }
- if (v & 0xf0) {
- p -= 4;
- v >>= 4;
- }
- if (v & 0xc) {
- p -= 2;
- v >>= 2;
- }
- if (v & 0x2) {
- p -= 1;
- v >>= 1;
- }
-
- return p;
-}
-EXPORT_SYMBOL(__clzsi2);
+++ /dev/null
-#include "libgcc.h"
-
-s64 __divdi3(s64 num, s64 den)
-{
- int minus = 0;
- s64 v;
-
- if (num < 0) {
- num = -num;
- minus = 1;
- }
- if (den < 0) {
- den = -den;
- minus ^= 1;
- }
-
- v = __udivmoddi4(num, den, NULL);
- if (minus)
- v = -v;
-
- return v;
-}
-EXPORT_SYMBOL(__divdi3);
+++ /dev/null
-#include "libgcc.h"
-
-s32 __divsi3(s32 num, s32 den)
-{
- int minus = 0;
- s32 v;
-
- if (num < 0) {
- num = -num;
- minus = 1;
- }
- if (den < 0) {
- den = -den;
- minus ^= 1;
- }
-
- v = __udivmodsi4(num, den, NULL);
- if (minus)
- v = -v;
-
- return v;
-}
-EXPORT_SYMBOL(__divsi3);
+++ /dev/null
-#include "libgcc.h"
-
-u64 __lshrdi3(u64 v, int cnt)
-{
- int c = cnt & 31;
- u32 vl = (u32) v;
- u32 vh = (u32) (v >> 32);
-
- if (cnt & 32) {
- vl = (vh >> c);
- vh = 0;
- } else {
- vl = (vl >> c) + (vh << (32 - c));
- vh = (vh >> c);
- }
-
- return ((u64) vh << 32) + vl;
-}
-EXPORT_SYMBOL(__lshrdi3);
+++ /dev/null
-#include "libgcc.h"
-
-s64 __moddi3(s64 num, s64 den)
-{
- int minus = 0;
- s64 v;
-
- if (num < 0) {
- num = -num;
- minus = 1;
- }
- if (den < 0) {
- den = -den;
- minus ^= 1;
- }
-
- (void)__udivmoddi4(num, den, (u64 *) & v);
- if (minus)
- v = -v;
-
- return v;
-}
-EXPORT_SYMBOL(__moddi3);
+++ /dev/null
-#include "libgcc.h"
-
-s32 __modsi3(s32 num, s32 den)
-{
- int minus = 0;
- s32 v;
-
- if (num < 0) {
- num = -num;
- minus = 1;
- }
- if (den < 0) {
- den = -den;
- minus ^= 1;
- }
-
- (void)__udivmodsi4(num, den, (u32 *) & v);
- if (minus)
- v = -v;
-
- return v;
-}
-EXPORT_SYMBOL(__modsi3);
+++ /dev/null
-#include "libgcc.h"
-
-union DWunion {
- struct {
- s32 high;
- s32 low;
- } s;
- s64 ll;
-};
-
-s64 __muldi3(s64 u, s64 v)
-{
- const union DWunion uu = { .ll = u };
- const union DWunion vv = { .ll = v };
- union DWunion w = { .ll = __umulsidi3(uu.s.low, vv.s.low) };
-
- w.s.high += ((u32)uu.s.low * (u32)vv.s.high
- + (u32)uu.s.high * (u32)vv.s.low);
-
- return w.ll;
-}
-EXPORT_SYMBOL(__muldi3);
+++ /dev/null
-#include "libgcc.h"
-
-u64 __udivdi3(u64 num, u64 den)
-{
- return __udivmoddi4(num, den, NULL);
-}
-EXPORT_SYMBOL(__udivdi3);
+++ /dev/null
-#include "libgcc.h"
-
-u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p)
-{
- u64 quot = 0, qbit = 1;
-
- if (den == 0) {
- BUG();
- }
-
- /* Left-justify denominator and count shift */
- while ((s64) den >= 0) {
- den <<= 1;
- qbit <<= 1;
- }
-
- while (qbit) {
- if (den <= num) {
- num -= den;
- quot += qbit;
- }
- den >>= 1;
- qbit >>= 1;
- }
-
- if (rem_p)
- *rem_p = num;
-
- return quot;
-}
-EXPORT_SYMBOL(__udivmoddi4);
+++ /dev/null
-#include "libgcc.h"
-
-u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p)
-{
- u32 quot = 0, qbit = 1;
-
- if (den == 0) {
- BUG();
- }
-
- /* Left-justify denominator and count shift */
- while ((s32) den >= 0) {
- den <<= 1;
- qbit <<= 1;
- }
-
- while (qbit) {
- if (den <= num) {
- num -= den;
- quot += qbit;
- }
- den >>= 1;
- qbit >>= 1;
- }
-
- if (rem_p)
- *rem_p = num;
-
- return quot;
-}
-EXPORT_SYMBOL(__udivmodsi4);
+++ /dev/null
-#include "libgcc.h"
-
-u32 __udivsi3(u32 num, u32 den)
-{
- return __udivmodsi4(num, den, NULL);
-}
-EXPORT_SYMBOL(__udivsi3);
+++ /dev/null
-#include "libgcc.h"
-
-u64 __umoddi3(u64 num, u64 den)
-{
- u64 v;
-
- (void)__udivmoddi4(num, den, &v);
- return v;
-}
-EXPORT_SYMBOL(__umoddi3);
+++ /dev/null
-#include "libgcc.h"
-
-u32 __umodsi3(u32 num, u32 den)
-{
- u32 v;
-
- (void)__udivmodsi4(num, den, &v);
- return v;
-}
-EXPORT_SYMBOL(__umodsi3);
+++ /dev/null
-#include "libgcc.h"
-
-#define __ll_B ((u32) 1 << (32 / 2))
-#define __ll_lowpart(t) ((u32) (t) & (__ll_B - 1))
-#define __ll_highpart(t) ((u32) (t) >> 16)
-
-#define umul_ppmm(w1, w0, u, v) \
- do { \
- u32 __x0, __x1, __x2, __x3; \
- u16 __ul, __vl, __uh, __vh; \
- \
- __ul = __ll_lowpart (u); \
- __uh = __ll_highpart (u); \
- __vl = __ll_lowpart (v); \
- __vh = __ll_highpart (v); \
- \
- __x0 = (u32) __ul * __vl; \
- __x1 = (u32) __ul * __vh; \
- __x2 = (u32) __uh * __vl; \
- __x3 = (u32) __uh * __vh; \
- \
- __x1 += __ll_highpart (__x0);/* this can't give carry */ \
- __x1 += __x2; /* but this indeed can */ \
- if (__x1 < __x2) /* did we get it? */ \
- __x3 += __ll_B; /* yes, add it in the proper pos. */ \
- \
- (w1) = __x3 + __ll_highpart (__x1); \
- (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
- } while (0)
-
-union DWunion {
- struct {
- s32 high;
- s32 low;
- } s;
- s64 ll;
-};
-
-u64 __umulsidi3(u32 u, u32 v)
-{
- union DWunion __w;
-
- umul_ppmm(__w.s.high, __w.s.low, u, v);
-
- return __w.ll;
-}
+++ /dev/null
-#ifndef _PA_LIBGCC_H_
-#define _PA_LIBGCC_H_
-
-#include <linux/types.h>
-#include <linux/module.h>
-
-/* Cribbed from klibc/libgcc/ */
-u64 __ashldi3(u64 v, int cnt);
-u64 __ashrdi3(u64 v, int cnt);
-
-u32 __clzsi2(u32 v);
-
-s64 __divdi3(s64 num, s64 den);
-s32 __divsi3(s32 num, s32 den);
-
-u64 __lshrdi3(u64 v, int cnt);
-
-s64 __moddi3(s64 num, s64 den);
-s32 __modsi3(s32 num, s32 den);
-
-u64 __udivdi3(u64 num, u64 den);
-u32 __udivsi3(u32 num, u32 den);
-
-u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p);
-u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p);
-
-u64 __umulsidi3(u32 u, u32 v);
-
-u64 __umoddi3(u64 num, u64 den);
-u32 __umodsi3(u32 num, u32 den);
-
-#endif /*_PA_LIBGCC_H_*/
+++ /dev/null
-obj-y := dyncall.o divI.o divU.o remI.o remU.o div_const.o mulI.o
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_divI
-/* ROUTINES: $$divI, $$divoI
-
- Single precision divide for signed binary integers.
-
- The quotient is truncated towards zero.
- The sign of the quotient is the XOR of the signs of the dividend and
- divisor.
- Divide by zero is trapped.
- Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = quotient
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions:
- . divisor is zero (traps with ADDIT,= 0,25,0)
- . dividend==-2**31 and divisor==-1 and routine is $$divoI
- . (traps with ADDO 26,25,0)
- . Changes memory at the following places:
- . NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Branchs to other millicode routines using BE
- . $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
- .
- . For selected divisors, calls a divide by constant routine written by
- . Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13.
- .
- . The only overflow case is -2**31 divided by -1.
- . Both routines return -2**31 but only $$divoI traps. */
-
-RDEFINE(temp,r1)
-RDEFINE(retreg,ret1) /* r29 */
-RDEFINE(temp1,arg0)
- SUBSPA_MILLI_DIV
- ATTR_MILLI
- .import $$divI_2,millicode
- .import $$divI_3,millicode
- .import $$divI_4,millicode
- .import $$divI_5,millicode
- .import $$divI_6,millicode
- .import $$divI_7,millicode
- .import $$divI_8,millicode
- .import $$divI_9,millicode
- .import $$divI_10,millicode
- .import $$divI_12,millicode
- .import $$divI_14,millicode
- .import $$divI_15,millicode
- .export $$divI,millicode
- .export $$divoI,millicode
- .proc
- .callinfo millicode
- .entry
-GSYM($$divoI)
- comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */
-GSYM($$divI)
- ldo -1(arg1),temp /* is there at most one bit set ? */
- and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */
- addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */
- b,n LREF(neg_denom)
-LSYM(pow2)
- addi,>= 0,arg0,retreg /* if numerator is negative, add the */
- add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */
- extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
- extrs retreg,15,16,retreg /* retreg = retreg >> 16 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
- ldi 0xcc,temp1 /* setup 0xcc in temp1 */
- extru,= arg1,23,8,temp /* test denominator with 0xff00 */
- extrs retreg,23,24,retreg /* retreg = retreg >> 8 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
- ldi 0xaa,temp /* setup 0xaa in temp */
- extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
- extrs retreg,27,28,retreg /* retreg = retreg >> 4 */
- and,= arg1,temp1,r0 /* test denominator with 0xcc */
- extrs retreg,29,30,retreg /* retreg = retreg >> 2 */
- and,= arg1,temp,r0 /* test denominator with 0xaa */
- extrs retreg,30,31,retreg /* retreg = retreg >> 1 */
- MILLIRETN
-LSYM(neg_denom)
- addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */
- b,n LREF(regular_seq)
- sub r0,arg1,temp /* make denominator positive */
- comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */
- ldo -1(temp),retreg /* is there at most one bit set ? */
- and,= temp,retreg,r0 /* if so, the denominator is power of 2 */
- b,n LREF(regular_seq)
- sub r0,arg0,retreg /* negate numerator */
- comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */
- copy retreg,arg0 /* set up arg0, arg1 and temp */
- copy temp,arg1 /* before branching to pow2 */
- b LREF(pow2)
- ldo -1(arg1),temp
-LSYM(regular_seq)
- comib,>>=,n 15,arg1,LREF(small_divisor)
- add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
-LSYM(normal)
- subi 0,retreg,retreg /* make it positive */
- sub 0,arg1,temp /* clear carry, */
- /* negate the divisor */
- ds 0,temp,0 /* set V-bit to the comple- */
- /* ment of the divisor sign */
- add retreg,retreg,retreg /* shift msb bit into carry */
- ds r0,arg1,temp /* 1st divide step, if no carry */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 2nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 3rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 4th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 5th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 6th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 7th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 8th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 9th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 10th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 11th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 12th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 13th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 14th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 15th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 16th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 17th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 18th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 19th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 20th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 21st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 22nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 23rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 24th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 25th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 26th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 27th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 28th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 29th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 30th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 31st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 32nd divide step, */
- addc retreg,retreg,retreg /* shift last retreg bit into retreg */
- xor,>= arg0,arg1,0 /* get correct sign of quotient */
- sub 0,retreg,retreg /* based on operand signs */
- MILLIRETN
- nop
-
-LSYM(small_divisor)
-
-#if defined(CONFIG_64BIT)
-/* Clear the upper 32 bits of the arg1 register. We are working with */
-/* small divisors (and 32-bit integers) We must not be mislead */
-/* by "1" bits left in the upper 32 bits. */
- depd %r0,31,32,%r25
-#endif
- blr,n arg1,r0
- nop
-/* table for divisor == 0,1, ... ,15 */
- addit,= 0,arg1,r0 /* trap if divisor == 0 */
- nop
- MILLIRET /* divisor == 1 */
- copy arg0,retreg
- MILLI_BEN($$divI_2) /* divisor == 2 */
- nop
- MILLI_BEN($$divI_3) /* divisor == 3 */
- nop
- MILLI_BEN($$divI_4) /* divisor == 4 */
- nop
- MILLI_BEN($$divI_5) /* divisor == 5 */
- nop
- MILLI_BEN($$divI_6) /* divisor == 6 */
- nop
- MILLI_BEN($$divI_7) /* divisor == 7 */
- nop
- MILLI_BEN($$divI_8) /* divisor == 8 */
- nop
- MILLI_BEN($$divI_9) /* divisor == 9 */
- nop
- MILLI_BEN($$divI_10) /* divisor == 10 */
- nop
- b LREF(normal) /* divisor == 11 */
- add,>= 0,arg0,retreg
- MILLI_BEN($$divI_12) /* divisor == 12 */
- nop
- b LREF(normal) /* divisor == 13 */
- add,>= 0,arg0,retreg
- MILLI_BEN($$divI_14) /* divisor == 14 */
- nop
- MILLI_BEN($$divI_15) /* divisor == 15 */
- nop
-
-LSYM(negative1)
- sub 0,arg0,retreg /* result is negation of dividend */
- MILLIRET
- addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */
- .exit
- .procend
- .end
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_divU
-/* ROUTINE: $$divU
- .
- . Single precision divide for unsigned integers.
- .
- . Quotient is truncated towards zero.
- . Traps on divide by zero.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = quotient
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions:
- . divisor is zero
- . Changes memory at the following places:
- . NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Does not create a stack frame.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Branchs to other millicode routines using BE:
- . $$divU_# for 3,5,6,7,9,10,12,14,15
- .
- . For selected small divisors calls the special divide by constant
- . routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */
-
-RDEFINE(temp,r1)
-RDEFINE(retreg,ret1) /* r29 */
-RDEFINE(temp1,arg0)
- SUBSPA_MILLI_DIV
- ATTR_MILLI
- .export $$divU,millicode
- .import $$divU_3,millicode
- .import $$divU_5,millicode
- .import $$divU_6,millicode
- .import $$divU_7,millicode
- .import $$divU_9,millicode
- .import $$divU_10,millicode
- .import $$divU_12,millicode
- .import $$divU_14,millicode
- .import $$divU_15,millicode
- .proc
- .callinfo millicode
- .entry
-GSYM($$divU)
-/* The subtract is not nullified since it does no harm and can be used
- by the two cases that branch back to "normal". */
- ldo -1(arg1),temp /* is there at most one bit set ? */
- and,= arg1,temp,r0 /* if so, denominator is power of 2 */
- b LREF(regular_seq)
- addit,= 0,arg1,0 /* trap for zero dvr */
- copy arg0,retreg
- extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
- extru retreg,15,16,retreg /* retreg = retreg >> 16 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
- ldi 0xcc,temp1 /* setup 0xcc in temp1 */
- extru,= arg1,23,8,temp /* test denominator with 0xff00 */
- extru retreg,23,24,retreg /* retreg = retreg >> 8 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
- ldi 0xaa,temp /* setup 0xaa in temp */
- extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
- extru retreg,27,28,retreg /* retreg = retreg >> 4 */
- and,= arg1,temp1,r0 /* test denominator with 0xcc */
- extru retreg,29,30,retreg /* retreg = retreg >> 2 */
- and,= arg1,temp,r0 /* test denominator with 0xaa */
- extru retreg,30,31,retreg /* retreg = retreg >> 1 */
- MILLIRETN
- nop
-LSYM(regular_seq)
- comib,>= 15,arg1,LREF(special_divisor)
- subi 0,arg1,temp /* clear carry, negate the divisor */
- ds r0,temp,r0 /* set V-bit to 1 */
-LSYM(normal)
- add arg0,arg0,retreg /* shift msb bit into carry */
- ds r0,arg1,temp /* 1st divide step, if no carry */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 2nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 3rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 4th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 5th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 6th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 7th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 8th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 9th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 10th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 11th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 12th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 13th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 14th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 15th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 16th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 17th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 18th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 19th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 20th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 21st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 22nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 23rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 24th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 25th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 26th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 27th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 28th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 29th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 30th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 31st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 32nd divide step, */
- MILLIRET
- addc retreg,retreg,retreg /* shift last retreg bit into retreg */
-
-/* Handle the cases where divisor is a small constant or has high bit on. */
-LSYM(special_divisor)
-/* blr arg1,r0 */
-/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */
-
-/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
- generating such a blr, comib sequence. A problem in nullification. So I
- rewrote this code. */
-
-#if defined(CONFIG_64BIT)
-/* Clear the upper 32 bits of the arg1 register. We are working with
- small divisors (and 32-bit unsigned integers) We must not be mislead
- by "1" bits left in the upper 32 bits. */
- depd %r0,31,32,%r25
-#endif
- comib,> 0,arg1,LREF(big_divisor)
- nop
- blr arg1,r0
- nop
-
-LSYM(zero_divisor) /* this label is here to provide external visibility */
- addit,= 0,arg1,0 /* trap for zero dvr */
- nop
- MILLIRET /* divisor == 1 */
- copy arg0,retreg
- MILLIRET /* divisor == 2 */
- extru arg0,30,31,retreg
- MILLI_BEN($$divU_3) /* divisor == 3 */
- nop
- MILLIRET /* divisor == 4 */
- extru arg0,29,30,retreg
- MILLI_BEN($$divU_5) /* divisor == 5 */
- nop
- MILLI_BEN($$divU_6) /* divisor == 6 */
- nop
- MILLI_BEN($$divU_7) /* divisor == 7 */
- nop
- MILLIRET /* divisor == 8 */
- extru arg0,28,29,retreg
- MILLI_BEN($$divU_9) /* divisor == 9 */
- nop
- MILLI_BEN($$divU_10) /* divisor == 10 */
- nop
- b LREF(normal) /* divisor == 11 */
- ds r0,temp,r0 /* set V-bit to 1 */
- MILLI_BEN($$divU_12) /* divisor == 12 */
- nop
- b LREF(normal) /* divisor == 13 */
- ds r0,temp,r0 /* set V-bit to 1 */
- MILLI_BEN($$divU_14) /* divisor == 14 */
- nop
- MILLI_BEN($$divU_15) /* divisor == 15 */
- nop
-
-/* Handle the case where the high bit is on in the divisor.
- Compute: if( dividend>=divisor) quotient=1; else quotient=0;
- Note: dividend>==divisor iff dividend-divisor does not borrow
- and not borrow iff carry. */
-LSYM(big_divisor)
- sub arg0,arg1,r0
- MILLIRET
- addc r0,r0,retreg
- .exit
- .procend
- .end
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_div_const
-/* ROUTINE: $$divI_2
- . $$divI_3 $$divU_3
- . $$divI_4
- . $$divI_5 $$divU_5
- . $$divI_6 $$divU_6
- . $$divI_7 $$divU_7
- . $$divI_8
- . $$divI_9 $$divU_9
- . $$divI_10 $$divU_10
- .
- . $$divI_12 $$divU_12
- .
- . $$divI_14 $$divU_14
- . $$divI_15 $$divU_15
- . $$divI_16
- . $$divI_17 $$divU_17
- .
- . Divide by selected constants for single precision binary integers.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = quotient
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions: NONE
- . Changes memory at the following places: NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Does not create a stack frame.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Calls other millicode routines using mrp: NONE
- . Calls other millicode routines: NONE */
-
-
-/* TRUNCATED DIVISION BY SMALL INTEGERS
-
- We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
- (with y fixed).
-
- Let a = floor(z/y), for some choice of z. Note that z will be
- chosen so that division by z is cheap.
-
- Let r be the remainder(z/y). In other words, r = z - ay.
-
- Now, our method is to choose a value for b such that
-
- q'(x) = floor((ax+b)/z)
-
- is equal to q(x) over as large a range of x as possible. If the
- two are equal over a sufficiently large range, and if it is easy to
- form the product (ax), and it is easy to divide by z, then we can
- perform the division much faster than the general division algorithm.
-
- So, we want the following to be true:
-
- . For x in the following range:
- .
- . ky <= x < (k+1)y
- .
- . implies that
- .
- . k <= (ax+b)/z < (k+1)
-
- We want to determine b such that this is true for all k in the
- range {0..K} for some maximum K.
-
- Since (ax+b) is an increasing function of x, we can take each
- bound separately to determine the "best" value for b.
-
- (ax+b)/z < (k+1) implies
-
- (a((k+1)y-1)+b < (k+1)z implies
-
- b < a + (k+1)(z-ay) implies
-
- b < a + (k+1)r
-
- This needs to be true for all k in the range {0..K}. In
- particular, it is true for k = 0 and this leads to a maximum
- acceptable value for b.
-
- b < a+r or b <= a+r-1
-
- Taking the other bound, we have
-
- k <= (ax+b)/z implies
-
- k <= (aky+b)/z implies
-
- k(z-ay) <= b implies
-
- kr <= b
-
- Clearly, the largest range for k will be achieved by maximizing b,
- when r is not zero. When r is zero, then the simplest choice for b
- is 0. When r is not 0, set
-
- . b = a+r-1
-
- Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
- for all x in the range:
-
- . 0 <= x < (K+1)y
-
- We need to determine what K is. Of our two bounds,
-
- . b < a+(k+1)r is satisfied for all k >= 0, by construction.
-
- The other bound is
-
- . kr <= b
-
- This is always true if r = 0. If r is not 0 (the usual case), then
- K = floor((a+r-1)/r), is the maximum value for k.
-
- Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
- answer for q(x) = floor(x/y) when x is in the range
-
- (0,(K+1)y-1) K = floor((a+r-1)/r)
-
- To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
- the formula for q'(x) yields the correct value of q(x) for all x
- representable by a single word in HPPA.
-
- We are also constrained in that computing the product (ax), adding
- b, and dividing by z must all be done quickly, otherwise we will be
- better off going through the general algorithm using the DS
- instruction, which uses approximately 70 cycles.
-
- For each y, there is a choice of z which satisfies the constraints
- for (K+1)y >= 2**32. We may not, however, be able to satisfy the
- timing constraints for arbitrary y. It seems that z being equal to
- a power of 2 or a power of 2 minus 1 is as good as we can do, since
- it minimizes the time to do division by z. We want the choice of z
- to also result in a value for (a) that minimizes the computation of
- the product (ax). This is best achieved if (a) has a regular bit
- pattern (so the multiplication can be done with shifts and adds).
- The value of (a) also needs to be less than 2**32 so the product is
- always guaranteed to fit in 2 words.
-
- In actual practice, the following should be done:
-
- 1) For negative x, you should take the absolute value and remember
- . the fact so that the result can be negated. This obviously does
- . not apply in the unsigned case.
- 2) For even y, you should factor out the power of 2 that divides y
- . and divide x by it. You can then proceed by dividing by the
- . odd factor of y.
-
- Here is a table of some odd values of y, and corresponding choices
- for z which are "good".
-
- y z r a (hex) max x (hex)
-
- 3 2**32 1 55555555 100000001
- 5 2**32 1 33333333 100000003
- 7 2**24-1 0 249249 (infinite)
- 9 2**24-1 0 1c71c7 (infinite)
- 11 2**20-1 0 1745d (infinite)
- 13 2**24-1 0 13b13b (infinite)
- 15 2**32 1 11111111 10000000d
- 17 2**32 1 f0f0f0f 10000000f
-
- If r is 1, then b = a+r-1 = a. This simplifies the computation
- of (ax+b), since you can compute (x+1)(a) instead. If r is 0,
- then b = 0 is ok to use which simplifies (ax+b).
-
- The bit patterns for 55555555, 33333333, and 11111111 are obviously
- very regular. The bit patterns for the other values of a above are:
-
- y (hex) (binary)
-
- 7 249249 001001001001001001001001 << regular >>
- 9 1c71c7 000111000111000111000111 << regular >>
- 11 1745d 000000010111010001011101 << irregular >>
- 13 13b13b 000100111011000100111011 << irregular >>
-
- The bit patterns for (a) corresponding to (y) of 11 and 13 may be
- too irregular to warrant using this method.
-
- When z is a power of 2 minus 1, then the division by z is slightly
- more complicated, involving an iterative solution.
-
- The code presented here solves division by 1 through 17, except for
- 11 and 13. There are algorithms for both signed and unsigned
- quantities given.
-
- TIMINGS (cycles)
-
- divisor positive negative unsigned
-
- . 1 2 2 2
- . 2 4 4 2
- . 3 19 21 19
- . 4 4 4 2
- . 5 18 22 19
- . 6 19 22 19
- . 8 4 4 2
- . 10 18 19 17
- . 12 18 20 18
- . 15 16 18 16
- . 16 4 4 2
- . 17 16 18 16
-
- Now, the algorithm for 7, 9, and 14 is an iterative one. That is,
- a loop body is executed until the tentative quotient is 0. The
- number of times the loop body is executed varies depending on the
- dividend, but is never more than two times. If the dividend is
- less than the divisor, then the loop body is not executed at all.
- Each iteration adds 4 cycles to the timings.
-
- divisor positive negative unsigned
-
- . 7 19+4n 20+4n 20+4n n = number of iterations
- . 9 21+4n 22+4n 21+4n
- . 14 21+4n 22+4n 20+4n
-
- To give an idea of how the number of iterations varies, here is a
- table of dividend versus number of iterations when dividing by 7.
-
- smallest largest required
- dividend dividend iterations
-
- . 0 6 0
- . 7 0x6ffffff 1
- 0x1000006 0xffffffff 2
-
- There is some overlap in the range of numbers requiring 1 and 2
- iterations. */
-
-RDEFINE(t2,r1)
-RDEFINE(x2,arg0) /* r26 */
-RDEFINE(t1,arg1) /* r25 */
-RDEFINE(x1,ret1) /* r29 */
-
- SUBSPA_MILLI_DIV
- ATTR_MILLI
-
- .proc
- .callinfo millicode
- .entry
-/* NONE of these routines require a stack frame
- ALL of these routines are unwindable from millicode */
-
-GSYM($$divide_by_constant)
- .export $$divide_by_constant,millicode
-/* Provides a "nice" label for the code covered by the unwind descriptor
- for things like gprof. */
-
-/* DIVISION BY 2 (shift by 1) */
-GSYM($$divI_2)
- .export $$divI_2,millicode
- comclr,>= arg0,0,0
- addi 1,arg0,arg0
- MILLIRET
- extrs arg0,30,31,ret1
-
-
-/* DIVISION BY 4 (shift by 2) */
-GSYM($$divI_4)
- .export $$divI_4,millicode
- comclr,>= arg0,0,0
- addi 3,arg0,arg0
- MILLIRET
- extrs arg0,29,30,ret1
-
-
-/* DIVISION BY 8 (shift by 3) */
-GSYM($$divI_8)
- .export $$divI_8,millicode
- comclr,>= arg0,0,0
- addi 7,arg0,arg0
- MILLIRET
- extrs arg0,28,29,ret1
-
-/* DIVISION BY 16 (shift by 4) */
-GSYM($$divI_16)
- .export $$divI_16,millicode
- comclr,>= arg0,0,0
- addi 15,arg0,arg0
- MILLIRET
- extrs arg0,27,28,ret1
-
-/****************************************************************************
-*
-* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
-*
-* includes 3,5,15,17 and also 6,10,12
-*
-****************************************************************************/
-
-/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
-
-GSYM($$divI_3)
- .export $$divI_3,millicode
- comb,<,N x2,0,LREF(neg3)
-
- addi 1,x2,x2 /* this cannot overflow */
- extru x2,1,2,x1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(pos)
- addc x1,0,x1
-
-LSYM(neg3)
- subi 1,x2,x2 /* this cannot overflow */
- extru x2,1,2,x1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(neg)
- addc x1,0,x1
-
-GSYM($$divU_3)
- .export $$divU_3,millicode
- addi 1,x2,x2 /* this CAN overflow */
- addc 0,0,x1
- shd x1,x2,30,t1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(pos)
- addc x1,t1,x1
-
-/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
-
-GSYM($$divI_5)
- .export $$divI_5,millicode
- comb,<,N x2,0,LREF(neg5)
-
- addi 3,x2,t1 /* this cannot overflow */
- sh1add x2,t1,x2 /* multiply by 3 to get started */
- b LREF(pos)
- addc 0,0,x1
-
-LSYM(neg5)
- sub 0,x2,x2 /* negate x2 */
- addi 1,x2,x2 /* this cannot overflow */
- shd 0,x2,31,x1 /* get top bit (can be 1) */
- sh1add x2,x2,x2 /* multiply by 3 to get started */
- b LREF(neg)
- addc x1,0,x1
-
-GSYM($$divU_5)
- .export $$divU_5,millicode
- addi 1,x2,x2 /* this CAN overflow */
- addc 0,0,x1
- shd x1,x2,31,t1 /* multiply by 3 to get started */
- sh1add x2,x2,x2
- b LREF(pos)
- addc t1,x1,x1
-
-/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */
-GSYM($$divI_6)
- .export $$divI_6,millicode
- comb,<,N x2,0,LREF(neg6)
- extru x2,30,31,x2 /* divide by 2 */
- addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */
- sh2add x2,t1,x2 /* multiply by 5 to get started */
- b LREF(pos)
- addc 0,0,x1
-
-LSYM(neg6)
- subi 2,x2,x2 /* negate, divide by 2, and add 1 */
- /* negation and adding 1 are done */
- /* at the same time by the SUBI */
- extru x2,30,31,x2
- shd 0,x2,30,x1
- sh2add x2,x2,x2 /* multiply by 5 to get started */
- b LREF(neg)
- addc x1,0,x1
-
-GSYM($$divU_6)
- .export $$divU_6,millicode
- extru x2,30,31,x2 /* divide by 2 */
- addi 1,x2,x2 /* cannot carry */
- shd 0,x2,30,x1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(pos)
- addc x1,0,x1
-
-/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
-GSYM($$divU_10)
- .export $$divU_10,millicode
- extru x2,30,31,x2 /* divide by 2 */
- addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */
- sh1add x2,t1,x2 /* multiply by 3 to get started */
- addc 0,0,x1
-LSYM(pos)
- shd x1,x2,28,t1 /* multiply by 0x11 */
- shd x2,0,28,t2
- add x2,t2,x2
- addc x1,t1,x1
-LSYM(pos_for_17)
- shd x1,x2,24,t1 /* multiply by 0x101 */
- shd x2,0,24,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,16,t1 /* multiply by 0x10001 */
- shd x2,0,16,t2
- add x2,t2,x2
- MILLIRET
- addc x1,t1,x1
-
-GSYM($$divI_10)
- .export $$divI_10,millicode
- comb,< x2,0,LREF(neg10)
- copy 0,x1
- extru x2,30,31,x2 /* divide by 2 */
- addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */
- sh1add x2,x2,x2 /* multiply by 3 to get started */
-
-LSYM(neg10)
- subi 2,x2,x2 /* negate, divide by 2, and add 1 */
- /* negation and adding 1 are done */
- /* at the same time by the SUBI */
- extru x2,30,31,x2
- sh1add x2,x2,x2 /* multiply by 3 to get started */
-LSYM(neg)
- shd x1,x2,28,t1 /* multiply by 0x11 */
- shd x2,0,28,t2
- add x2,t2,x2
- addc x1,t1,x1
-LSYM(neg_for_17)
- shd x1,x2,24,t1 /* multiply by 0x101 */
- shd x2,0,24,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,16,t1 /* multiply by 0x10001 */
- shd x2,0,16,t2
- add x2,t2,x2
- addc x1,t1,x1
- MILLIRET
- sub 0,x1,x1
-
-/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
-GSYM($$divI_12)
- .export $$divI_12,millicode
- comb,< x2,0,LREF(neg12)
- copy 0,x1
- extru x2,29,30,x2 /* divide by 4 */
- addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */
- sh2add x2,x2,x2 /* multiply by 5 to get started */
-
-LSYM(neg12)
- subi 4,x2,x2 /* negate, divide by 4, and add 1 */
- /* negation and adding 1 are done */
- /* at the same time by the SUBI */
- extru x2,29,30,x2
- b LREF(neg)
- sh2add x2,x2,x2 /* multiply by 5 to get started */
-
-GSYM($$divU_12)
- .export $$divU_12,millicode
- extru x2,29,30,x2 /* divide by 4 */
- addi 5,x2,t1 /* cannot carry */
- sh2add x2,t1,x2 /* multiply by 5 to get started */
- b LREF(pos)
- addc 0,0,x1
-
-/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
-GSYM($$divI_15)
- .export $$divI_15,millicode
- comb,< x2,0,LREF(neg15)
- copy 0,x1
- addib,tr 1,x2,LREF(pos)+4
- shd x1,x2,28,t1
-
-LSYM(neg15)
- b LREF(neg)
- subi 1,x2,x2
-
-GSYM($$divU_15)
- .export $$divU_15,millicode
- addi 1,x2,x2 /* this CAN overflow */
- b LREF(pos)
- addc 0,0,x1
-
-/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */
-GSYM($$divI_17)
- .export $$divI_17,millicode
- comb,<,n x2,0,LREF(neg17)
- addi 1,x2,x2 /* this cannot overflow */
- shd 0,x2,28,t1 /* multiply by 0xf to get started */
- shd x2,0,28,t2
- sub t2,x2,x2
- b LREF(pos_for_17)
- subb t1,0,x1
-
-LSYM(neg17)
- subi 1,x2,x2 /* this cannot overflow */
- shd 0,x2,28,t1 /* multiply by 0xf to get started */
- shd x2,0,28,t2
- sub t2,x2,x2
- b LREF(neg_for_17)
- subb t1,0,x1
-
-GSYM($$divU_17)
- .export $$divU_17,millicode
- addi 1,x2,x2 /* this CAN overflow */
- addc 0,0,x1
- shd x1,x2,28,t1 /* multiply by 0xf to get started */
-LSYM(u17)
- shd x2,0,28,t2
- sub t2,x2,x2
- b LREF(pos_for_17)
- subb t1,x1,x1
-
-
-/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
- includes 7,9 and also 14
-
-
- z = 2**24-1
- r = z mod x = 0
-
- so choose b = 0
-
- Also, in order to divide by z = 2**24-1, we approximate by dividing
- by (z+1) = 2**24 (which is easy), and then correcting.
-
- (ax) = (z+1)q' + r
- . = zq' + (q'+r)
-
- So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
- Then the true remainder of (ax)/z is (q'+r). Repeat the process
- with this new remainder, adding the tentative quotients together,
- until a tentative quotient is 0 (and then we are done). There is
- one last correction to be done. It is possible that (q'+r) = z.
- If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But,
- in fact, we need to add 1 more to the quotient. Now, it turns
- out that this happens if and only if the original value x is
- an exact multiple of y. So, to avoid a three instruction test at
- the end, instead use 1 instruction to add 1 to x at the beginning. */
-
-/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
-GSYM($$divI_7)
- .export $$divI_7,millicode
- comb,<,n x2,0,LREF(neg7)
-LSYM(7)
- addi 1,x2,x2 /* cannot overflow */
- shd 0,x2,29,x1
- sh3add x2,x2,x2
- addc x1,0,x1
-LSYM(pos7)
- shd x1,x2,26,t1
- shd x2,0,26,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,20,t1
- shd x2,0,20,t2
- add x2,t2,x2
- addc x1,t1,t1
-
- /* computed <t1,x2>. Now divide it by (2**24 - 1) */
-
- copy 0,x1
- shd,= t1,x2,24,t1 /* tentative quotient */
-LSYM(1)
- addb,tr t1,x1,LREF(2) /* add to previous quotient */
- extru x2,31,24,x2 /* new remainder (unadjusted) */
-
- MILLIRETN
-
-LSYM(2)
- addb,tr t1,x2,LREF(1) /* adjust remainder */
- extru,= x2,7,8,t1 /* new quotient */
-
-LSYM(neg7)
- subi 1,x2,x2 /* negate x2 and add 1 */
-LSYM(8)
- shd 0,x2,29,x1
- sh3add x2,x2,x2
- addc x1,0,x1
-
-LSYM(neg7_shift)
- shd x1,x2,26,t1
- shd x2,0,26,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,20,t1
- shd x2,0,20,t2
- add x2,t2,x2
- addc x1,t1,t1
-
- /* computed <t1,x2>. Now divide it by (2**24 - 1) */
-
- copy 0,x1
- shd,= t1,x2,24,t1 /* tentative quotient */
-LSYM(3)
- addb,tr t1,x1,LREF(4) /* add to previous quotient */
- extru x2,31,24,x2 /* new remainder (unadjusted) */
-
- MILLIRET
- sub 0,x1,x1 /* negate result */
-
-LSYM(4)
- addb,tr t1,x2,LREF(3) /* adjust remainder */
- extru,= x2,7,8,t1 /* new quotient */
-
-GSYM($$divU_7)
- .export $$divU_7,millicode
- addi 1,x2,x2 /* can carry */
- addc 0,0,x1
- shd x1,x2,29,t1
- sh3add x2,x2,x2
- b LREF(pos7)
- addc t1,x1,x1
-
-/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
-GSYM($$divI_9)
- .export $$divI_9,millicode
- comb,<,n x2,0,LREF(neg9)
- addi 1,x2,x2 /* cannot overflow */
- shd 0,x2,29,t1
- shd x2,0,29,t2
- sub t2,x2,x2
- b LREF(pos7)
- subb t1,0,x1
-
-LSYM(neg9)
- subi 1,x2,x2 /* negate and add 1 */
- shd 0,x2,29,t1
- shd x2,0,29,t2
- sub t2,x2,x2
- b LREF(neg7_shift)
- subb t1,0,x1
-
-GSYM($$divU_9)
- .export $$divU_9,millicode
- addi 1,x2,x2 /* can carry */
- addc 0,0,x1
- shd x1,x2,29,t1
- shd x2,0,29,t2
- sub t2,x2,x2
- b LREF(pos7)
- subb t1,x1,x1
-
-/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
-GSYM($$divI_14)
- .export $$divI_14,millicode
- comb,<,n x2,0,LREF(neg14)
-GSYM($$divU_14)
- .export $$divU_14,millicode
- b LREF(7) /* go to 7 case */
- extru x2,30,31,x2 /* divide by 2 */
-
-LSYM(neg14)
- subi 2,x2,x2 /* negate (and add 2) */
- b LREF(8)
- extru x2,30,31,x2 /* divide by 2 */
- .exit
- .procend
- .end
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_dyncall
- SUBSPA_MILLI
- ATTR_DATA
-GSYM($$dyncall)
- .export $$dyncall,millicode
- .proc
- .callinfo millicode
- .entry
- bb,>=,n %r22,30,LREF(1) ; branch if not plabel address
- depi 0,31,2,%r22 ; clear the two least significant bits
- ldw 4(%r22),%r19 ; load new LTP value
- ldw 0(%r22),%r22 ; load address of target
-LSYM(1)
- bv %r0(%r22) ; branch to the real target
- stw %r2,-24(%r30) ; save return address into frame marker
- .exit
- .procend
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#ifdef CONFIG_64BIT
- .level 2.0w
-#endif
-
-/* Hardware General Registers. */
-r0: .reg %r0
-r1: .reg %r1
-r2: .reg %r2
-r3: .reg %r3
-r4: .reg %r4
-r5: .reg %r5
-r6: .reg %r6
-r7: .reg %r7
-r8: .reg %r8
-r9: .reg %r9
-r10: .reg %r10
-r11: .reg %r11
-r12: .reg %r12
-r13: .reg %r13
-r14: .reg %r14
-r15: .reg %r15
-r16: .reg %r16
-r17: .reg %r17
-r18: .reg %r18
-r19: .reg %r19
-r20: .reg %r20
-r21: .reg %r21
-r22: .reg %r22
-r23: .reg %r23
-r24: .reg %r24
-r25: .reg %r25
-r26: .reg %r26
-r27: .reg %r27
-r28: .reg %r28
-r29: .reg %r29
-r30: .reg %r30
-r31: .reg %r31
-
-/* Hardware Space Registers. */
-sr0: .reg %sr0
-sr1: .reg %sr1
-sr2: .reg %sr2
-sr3: .reg %sr3
-sr4: .reg %sr4
-sr5: .reg %sr5
-sr6: .reg %sr6
-sr7: .reg %sr7
-
-/* Hardware Floating Point Registers. */
-fr0: .reg %fr0
-fr1: .reg %fr1
-fr2: .reg %fr2
-fr3: .reg %fr3
-fr4: .reg %fr4
-fr5: .reg %fr5
-fr6: .reg %fr6
-fr7: .reg %fr7
-fr8: .reg %fr8
-fr9: .reg %fr9
-fr10: .reg %fr10
-fr11: .reg %fr11
-fr12: .reg %fr12
-fr13: .reg %fr13
-fr14: .reg %fr14
-fr15: .reg %fr15
-
-/* Hardware Control Registers. */
-cr11: .reg %cr11
-sar: .reg %cr11 /* Shift Amount Register */
-
-/* Software Architecture General Registers. */
-rp: .reg r2 /* return pointer */
-#ifdef CONFIG_64BIT
-mrp: .reg r2 /* millicode return pointer */
-#else
-mrp: .reg r31 /* millicode return pointer */
-#endif
-ret0: .reg r28 /* return value */
-ret1: .reg r29 /* return value (high part of double) */
-sp: .reg r30 /* stack pointer */
-dp: .reg r27 /* data pointer */
-arg0: .reg r26 /* argument */
-arg1: .reg r25 /* argument or high part of double argument */
-arg2: .reg r24 /* argument */
-arg3: .reg r23 /* argument or high part of double argument */
-
-/* Software Architecture Space Registers. */
-/* sr0 ; return link from BLE */
-sret: .reg sr1 /* return value */
-sarg: .reg sr1 /* argument */
-/* sr4 ; PC SPACE tracker */
-/* sr5 ; process private data */
-
-/* Frame Offsets (millicode convention!) Used when calling other
- millicode routines. Stack unwinding is dependent upon these
- definitions. */
-r31_slot: .equ -20 /* "current RP" slot */
-sr0_slot: .equ -16 /* "static link" slot */
-#if defined(CONFIG_64BIT)
-mrp_slot: .equ -16 /* "current RP" slot */
-psp_slot: .equ -8 /* "previous SP" slot */
-#else
-mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */
-#endif
-
-
-#define DEFINE(name,value)name: .EQU value
-#define RDEFINE(name,value)name: .REG value
-#ifdef milliext
-#define MILLI_BE(lbl) BE lbl(sr7,r0)
-#define MILLI_BEN(lbl) BE,n lbl(sr7,r0)
-#define MILLI_BLE(lbl) BLE lbl(sr7,r0)
-#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0)
-#define MILLIRETN BE,n 0(sr0,mrp)
-#define MILLIRET BE 0(sr0,mrp)
-#define MILLI_RETN BE,n 0(sr0,mrp)
-#define MILLI_RET BE 0(sr0,mrp)
-#else
-#define MILLI_BE(lbl) B lbl
-#define MILLI_BEN(lbl) B,n lbl
-#define MILLI_BLE(lbl) BL lbl,mrp
-#define MILLI_BLEN(lbl) BL,n lbl,mrp
-#define MILLIRETN BV,n 0(mrp)
-#define MILLIRET BV 0(mrp)
-#define MILLI_RETN BV,n 0(mrp)
-#define MILLI_RET BV 0(mrp)
-#endif
-
-#define CAT(a,b) a##b
-
-#define SUBSPA_MILLI .section .text
-#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
-#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
-#define ATTR_MILLI
-#define SUBSPA_DATA .section .data
-#define ATTR_DATA
-#define GLOBAL $global$
-#define GSYM(sym) !sym:
-#define LSYM(sym) !CAT(.L,sym:)
-#define LREF(sym) CAT(.L,sym)
-
-#ifdef L_dyncall
- SUBSPA_MILLI
- ATTR_DATA
-GSYM($$dyncall)
- .export $$dyncall,millicode
- .proc
- .callinfo millicode
- .entry
- bb,>=,n %r22,30,LREF(1) ; branch if not plabel address
- depi 0,31,2,%r22 ; clear the two least significant bits
- ldw 4(%r22),%r19 ; load new LTP value
- ldw 0(%r22),%r22 ; load address of target
-LSYM(1)
- bv %r0(%r22) ; branch to the real target
- stw %r2,-24(%r30) ; save return address into frame marker
- .exit
- .procend
-#endif
-
-#ifdef L_divI
-/* ROUTINES: $$divI, $$divoI
-
- Single precision divide for signed binary integers.
-
- The quotient is truncated towards zero.
- The sign of the quotient is the XOR of the signs of the dividend and
- divisor.
- Divide by zero is trapped.
- Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = quotient
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions:
- . divisor is zero (traps with ADDIT,= 0,25,0)
- . dividend==-2**31 and divisor==-1 and routine is $$divoI
- . (traps with ADDO 26,25,0)
- . Changes memory at the following places:
- . NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Branchs to other millicode routines using BE
- . $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
- .
- . For selected divisors, calls a divide by constant routine written by
- . Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13.
- .
- . The only overflow case is -2**31 divided by -1.
- . Both routines return -2**31 but only $$divoI traps. */
-
-RDEFINE(temp,r1)
-RDEFINE(retreg,ret1) /* r29 */
-RDEFINE(temp1,arg0)
- SUBSPA_MILLI_DIV
- ATTR_MILLI
- .import $$divI_2,millicode
- .import $$divI_3,millicode
- .import $$divI_4,millicode
- .import $$divI_5,millicode
- .import $$divI_6,millicode
- .import $$divI_7,millicode
- .import $$divI_8,millicode
- .import $$divI_9,millicode
- .import $$divI_10,millicode
- .import $$divI_12,millicode
- .import $$divI_14,millicode
- .import $$divI_15,millicode
- .export $$divI,millicode
- .export $$divoI,millicode
- .proc
- .callinfo millicode
- .entry
-GSYM($$divoI)
- comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */
-GSYM($$divI)
- ldo -1(arg1),temp /* is there at most one bit set ? */
- and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */
- addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */
- b,n LREF(neg_denom)
-LSYM(pow2)
- addi,>= 0,arg0,retreg /* if numerator is negative, add the */
- add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */
- extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
- extrs retreg,15,16,retreg /* retreg = retreg >> 16 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
- ldi 0xcc,temp1 /* setup 0xcc in temp1 */
- extru,= arg1,23,8,temp /* test denominator with 0xff00 */
- extrs retreg,23,24,retreg /* retreg = retreg >> 8 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
- ldi 0xaa,temp /* setup 0xaa in temp */
- extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
- extrs retreg,27,28,retreg /* retreg = retreg >> 4 */
- and,= arg1,temp1,r0 /* test denominator with 0xcc */
- extrs retreg,29,30,retreg /* retreg = retreg >> 2 */
- and,= arg1,temp,r0 /* test denominator with 0xaa */
- extrs retreg,30,31,retreg /* retreg = retreg >> 1 */
- MILLIRETN
-LSYM(neg_denom)
- addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */
- b,n LREF(regular_seq)
- sub r0,arg1,temp /* make denominator positive */
- comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */
- ldo -1(temp),retreg /* is there at most one bit set ? */
- and,= temp,retreg,r0 /* if so, the denominator is power of 2 */
- b,n LREF(regular_seq)
- sub r0,arg0,retreg /* negate numerator */
- comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */
- copy retreg,arg0 /* set up arg0, arg1 and temp */
- copy temp,arg1 /* before branching to pow2 */
- b LREF(pow2)
- ldo -1(arg1),temp
-LSYM(regular_seq)
- comib,>>=,n 15,arg1,LREF(small_divisor)
- add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
-LSYM(normal)
- subi 0,retreg,retreg /* make it positive */
- sub 0,arg1,temp /* clear carry, */
- /* negate the divisor */
- ds 0,temp,0 /* set V-bit to the comple- */
- /* ment of the divisor sign */
- add retreg,retreg,retreg /* shift msb bit into carry */
- ds r0,arg1,temp /* 1st divide step, if no carry */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 2nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 3rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 4th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 5th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 6th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 7th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 8th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 9th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 10th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 11th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 12th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 13th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 14th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 15th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 16th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 17th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 18th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 19th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 20th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 21st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 22nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 23rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 24th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 25th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 26th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 27th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 28th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 29th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 30th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 31st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 32nd divide step, */
- addc retreg,retreg,retreg /* shift last retreg bit into retreg */
- xor,>= arg0,arg1,0 /* get correct sign of quotient */
- sub 0,retreg,retreg /* based on operand signs */
- MILLIRETN
- nop
-
-LSYM(small_divisor)
-
-#if defined(CONFIG_64BIT)
-/* Clear the upper 32 bits of the arg1 register. We are working with */
-/* small divisors (and 32-bit integers) We must not be mislead */
-/* by "1" bits left in the upper 32 bits. */
- depd %r0,31,32,%r25
-#endif
- blr,n arg1,r0
- nop
-/* table for divisor == 0,1, ... ,15 */
- addit,= 0,arg1,r0 /* trap if divisor == 0 */
- nop
- MILLIRET /* divisor == 1 */
- copy arg0,retreg
- MILLI_BEN($$divI_2) /* divisor == 2 */
- nop
- MILLI_BEN($$divI_3) /* divisor == 3 */
- nop
- MILLI_BEN($$divI_4) /* divisor == 4 */
- nop
- MILLI_BEN($$divI_5) /* divisor == 5 */
- nop
- MILLI_BEN($$divI_6) /* divisor == 6 */
- nop
- MILLI_BEN($$divI_7) /* divisor == 7 */
- nop
- MILLI_BEN($$divI_8) /* divisor == 8 */
- nop
- MILLI_BEN($$divI_9) /* divisor == 9 */
- nop
- MILLI_BEN($$divI_10) /* divisor == 10 */
- nop
- b LREF(normal) /* divisor == 11 */
- add,>= 0,arg0,retreg
- MILLI_BEN($$divI_12) /* divisor == 12 */
- nop
- b LREF(normal) /* divisor == 13 */
- add,>= 0,arg0,retreg
- MILLI_BEN($$divI_14) /* divisor == 14 */
- nop
- MILLI_BEN($$divI_15) /* divisor == 15 */
- nop
-
-LSYM(negative1)
- sub 0,arg0,retreg /* result is negation of dividend */
- MILLIRET
- addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */
- .exit
- .procend
- .end
-#endif
-
-#ifdef L_divU
-/* ROUTINE: $$divU
- .
- . Single precision divide for unsigned integers.
- .
- . Quotient is truncated towards zero.
- . Traps on divide by zero.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = quotient
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions:
- . divisor is zero
- . Changes memory at the following places:
- . NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Does not create a stack frame.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Branchs to other millicode routines using BE:
- . $$divU_# for 3,5,6,7,9,10,12,14,15
- .
- . For selected small divisors calls the special divide by constant
- . routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */
-
-RDEFINE(temp,r1)
-RDEFINE(retreg,ret1) /* r29 */
-RDEFINE(temp1,arg0)
- SUBSPA_MILLI_DIV
- ATTR_MILLI
- .export $$divU,millicode
- .import $$divU_3,millicode
- .import $$divU_5,millicode
- .import $$divU_6,millicode
- .import $$divU_7,millicode
- .import $$divU_9,millicode
- .import $$divU_10,millicode
- .import $$divU_12,millicode
- .import $$divU_14,millicode
- .import $$divU_15,millicode
- .proc
- .callinfo millicode
- .entry
-GSYM($$divU)
-/* The subtract is not nullified since it does no harm and can be used
- by the two cases that branch back to "normal". */
- ldo -1(arg1),temp /* is there at most one bit set ? */
- and,= arg1,temp,r0 /* if so, denominator is power of 2 */
- b LREF(regular_seq)
- addit,= 0,arg1,0 /* trap for zero dvr */
- copy arg0,retreg
- extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
- extru retreg,15,16,retreg /* retreg = retreg >> 16 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
- ldi 0xcc,temp1 /* setup 0xcc in temp1 */
- extru,= arg1,23,8,temp /* test denominator with 0xff00 */
- extru retreg,23,24,retreg /* retreg = retreg >> 8 */
- or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
- ldi 0xaa,temp /* setup 0xaa in temp */
- extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
- extru retreg,27,28,retreg /* retreg = retreg >> 4 */
- and,= arg1,temp1,r0 /* test denominator with 0xcc */
- extru retreg,29,30,retreg /* retreg = retreg >> 2 */
- and,= arg1,temp,r0 /* test denominator with 0xaa */
- extru retreg,30,31,retreg /* retreg = retreg >> 1 */
- MILLIRETN
- nop
-LSYM(regular_seq)
- comib,>= 15,arg1,LREF(special_divisor)
- subi 0,arg1,temp /* clear carry, negate the divisor */
- ds r0,temp,r0 /* set V-bit to 1 */
-LSYM(normal)
- add arg0,arg0,retreg /* shift msb bit into carry */
- ds r0,arg1,temp /* 1st divide step, if no carry */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 2nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 3rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 4th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 5th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 6th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 7th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 8th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 9th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 10th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 11th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 12th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 13th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 14th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 15th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 16th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 17th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 18th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 19th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 20th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 21st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 22nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 23rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 24th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 25th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 26th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 27th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 28th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 29th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 30th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 31st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds temp,arg1,temp /* 32nd divide step, */
- MILLIRET
- addc retreg,retreg,retreg /* shift last retreg bit into retreg */
-
-/* Handle the cases where divisor is a small constant or has high bit on. */
-LSYM(special_divisor)
-/* blr arg1,r0 */
-/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */
-
-/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
- generating such a blr, comib sequence. A problem in nullification. So I
- rewrote this code. */
-
-#if defined(CONFIG_64BIT)
-/* Clear the upper 32 bits of the arg1 register. We are working with
- small divisors (and 32-bit unsigned integers) We must not be mislead
- by "1" bits left in the upper 32 bits. */
- depd %r0,31,32,%r25
-#endif
- comib,> 0,arg1,LREF(big_divisor)
- nop
- blr arg1,r0
- nop
-
-LSYM(zero_divisor) /* this label is here to provide external visibility */
- addit,= 0,arg1,0 /* trap for zero dvr */
- nop
- MILLIRET /* divisor == 1 */
- copy arg0,retreg
- MILLIRET /* divisor == 2 */
- extru arg0,30,31,retreg
- MILLI_BEN($$divU_3) /* divisor == 3 */
- nop
- MILLIRET /* divisor == 4 */
- extru arg0,29,30,retreg
- MILLI_BEN($$divU_5) /* divisor == 5 */
- nop
- MILLI_BEN($$divU_6) /* divisor == 6 */
- nop
- MILLI_BEN($$divU_7) /* divisor == 7 */
- nop
- MILLIRET /* divisor == 8 */
- extru arg0,28,29,retreg
- MILLI_BEN($$divU_9) /* divisor == 9 */
- nop
- MILLI_BEN($$divU_10) /* divisor == 10 */
- nop
- b LREF(normal) /* divisor == 11 */
- ds r0,temp,r0 /* set V-bit to 1 */
- MILLI_BEN($$divU_12) /* divisor == 12 */
- nop
- b LREF(normal) /* divisor == 13 */
- ds r0,temp,r0 /* set V-bit to 1 */
- MILLI_BEN($$divU_14) /* divisor == 14 */
- nop
- MILLI_BEN($$divU_15) /* divisor == 15 */
- nop
-
-/* Handle the case where the high bit is on in the divisor.
- Compute: if( dividend>=divisor) quotient=1; else quotient=0;
- Note: dividend>==divisor iff dividend-divisor does not borrow
- and not borrow iff carry. */
-LSYM(big_divisor)
- sub arg0,arg1,r0
- MILLIRET
- addc r0,r0,retreg
- .exit
- .procend
- .end
-#endif
-
-#ifdef L_remI
-/* ROUTINE: $$remI
-
- DESCRIPTION:
- . $$remI returns the remainder of the division of two signed 32-bit
- . integers. The sign of the remainder is the same as the sign of
- . the dividend.
-
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = destroyed
- . arg1 = destroyed
- . ret1 = remainder
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions: DIVIDE BY ZERO
- . Changes memory at the following places: NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable
- . Does not create a stack frame
- . Is usable for internal or external microcode
-
- DISCUSSION:
- . Calls other millicode routines via mrp: NONE
- . Calls other millicode routines: NONE */
-
-RDEFINE(tmp,r1)
-RDEFINE(retreg,ret1)
-
- SUBSPA_MILLI
- ATTR_MILLI
- .proc
- .callinfo millicode
- .entry
-GSYM($$remI)
-GSYM($$remoI)
- .export $$remI,MILLICODE
- .export $$remoI,MILLICODE
- ldo -1(arg1),tmp /* is there at most one bit set ? */
- and,<> arg1,tmp,r0 /* if not, don't use power of 2 */
- addi,> 0,arg1,r0 /* if denominator > 0, use power */
- /* of 2 */
- b,n LREF(neg_denom)
-LSYM(pow2)
- comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */
- and arg0,tmp,retreg /* get the result */
- MILLIRETN
-LSYM(neg_num)
- subi 0,arg0,arg0 /* negate numerator */
- and arg0,tmp,retreg /* get the result */
- subi 0,retreg,retreg /* negate result */
- MILLIRETN
-LSYM(neg_denom)
- addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */
- /* of 2 */
- b,n LREF(regular_seq)
- sub r0,arg1,tmp /* make denominator positive */
- comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */
- ldo -1(tmp),retreg /* is there at most one bit set ? */
- and,= tmp,retreg,r0 /* if not, go to regular_seq */
- b,n LREF(regular_seq)
- comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */
- and arg0,retreg,retreg
- MILLIRETN
-LSYM(neg_num_2)
- subi 0,arg0,tmp /* test against 0x80000000 */
- and tmp,retreg,retreg
- subi 0,retreg,retreg
- MILLIRETN
-LSYM(regular_seq)
- addit,= 0,arg1,0 /* trap if div by zero */
- add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
- sub 0,retreg,retreg /* make it positive */
- sub 0,arg1, tmp /* clear carry, */
- /* negate the divisor */
- ds 0, tmp,0 /* set V-bit to the comple- */
- /* ment of the divisor sign */
- or 0,0, tmp /* clear tmp */
- add retreg,retreg,retreg /* shift msb bit into carry */
- ds tmp,arg1, tmp /* 1st divide step, if no carry */
- /* out, msb of quotient = 0 */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
-LSYM(t1)
- ds tmp,arg1, tmp /* 2nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 3rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 4th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 5th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 6th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 7th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 8th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 9th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 10th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 11th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 12th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 13th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 14th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 15th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 16th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 17th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 18th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 19th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 20th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 21st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 22nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 23rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 24th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 25th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 26th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 27th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 28th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 29th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 30th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 31st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 32nd divide step, */
- addc retreg,retreg,retreg /* shift last bit into retreg */
- movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */
- add,< arg1,0,0 /* if arg1 > 0, add arg1 */
- add,tr tmp,arg1,retreg /* for correcting remainder tmp */
- sub tmp,arg1,retreg /* else add absolute value arg1 */
-LSYM(finish)
- add,>= arg0,0,0 /* set sign of remainder */
- sub 0,retreg,retreg /* to sign of dividend */
- MILLIRET
- nop
- .exit
- .procend
-#ifdef milliext
- .origin 0x00000200
-#endif
- .end
-#endif
-
-#ifdef L_remU
-/* ROUTINE: $$remU
- . Single precision divide for remainder with unsigned binary integers.
- .
- . The remainder must be dividend-(dividend/divisor)*divisor.
- . Divide by zero is trapped.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = remainder
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions: DIVIDE BY ZERO
- . Changes memory at the following places: NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Does not create a stack frame.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Calls other millicode routines using mrp: NONE
- . Calls other millicode routines: NONE */
-
-
-RDEFINE(temp,r1)
-RDEFINE(rmndr,ret1) /* r29 */
- SUBSPA_MILLI
- ATTR_MILLI
- .export $$remU,millicode
- .proc
- .callinfo millicode
- .entry
-GSYM($$remU)
- ldo -1(arg1),temp /* is there at most one bit set ? */
- and,= arg1,temp,r0 /* if not, don't use power of 2 */
- b LREF(regular_seq)
- addit,= 0,arg1,r0 /* trap on div by zero */
- and arg0,temp,rmndr /* get the result for power of 2 */
- MILLIRETN
-LSYM(regular_seq)
- comib,>=,n 0,arg1,LREF(special_case)
- subi 0,arg1,rmndr /* clear carry, negate the divisor */
- ds r0,rmndr,r0 /* set V-bit to 1 */
- add arg0,arg0,temp /* shift msb bit into carry */
- ds r0,arg1,rmndr /* 1st divide step, if no carry */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 2nd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 3rd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 4th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 5th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 6th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 7th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 8th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 9th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 10th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 11th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 12th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 13th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 14th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 15th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 16th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 17th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 18th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 19th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 20th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 21st divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 22nd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 23rd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 24th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 25th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 26th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 27th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 28th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 29th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 30th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 31st divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 32nd divide step, */
- comiclr,<= 0,rmndr,r0
- add rmndr,arg1,rmndr /* correction */
- MILLIRETN
- nop
-
-/* Putting >= on the last DS and deleting COMICLR does not work! */
-LSYM(special_case)
- sub,>>= arg0,arg1,rmndr
- copy arg0,rmndr
- MILLIRETN
- nop
- .exit
- .procend
- .end
-#endif
-
-#ifdef L_div_const
-/* ROUTINE: $$divI_2
- . $$divI_3 $$divU_3
- . $$divI_4
- . $$divI_5 $$divU_5
- . $$divI_6 $$divU_6
- . $$divI_7 $$divU_7
- . $$divI_8
- . $$divI_9 $$divU_9
- . $$divI_10 $$divU_10
- .
- . $$divI_12 $$divU_12
- .
- . $$divI_14 $$divU_14
- . $$divI_15 $$divU_15
- . $$divI_16
- . $$divI_17 $$divU_17
- .
- . Divide by selected constants for single precision binary integers.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = quotient
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions: NONE
- . Changes memory at the following places: NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Does not create a stack frame.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Calls other millicode routines using mrp: NONE
- . Calls other millicode routines: NONE */
-
-
-/* TRUNCATED DIVISION BY SMALL INTEGERS
-
- We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
- (with y fixed).
-
- Let a = floor(z/y), for some choice of z. Note that z will be
- chosen so that division by z is cheap.
-
- Let r be the remainder(z/y). In other words, r = z - ay.
-
- Now, our method is to choose a value for b such that
-
- q'(x) = floor((ax+b)/z)
-
- is equal to q(x) over as large a range of x as possible. If the
- two are equal over a sufficiently large range, and if it is easy to
- form the product (ax), and it is easy to divide by z, then we can
- perform the division much faster than the general division algorithm.
-
- So, we want the following to be true:
-
- . For x in the following range:
- .
- . ky <= x < (k+1)y
- .
- . implies that
- .
- . k <= (ax+b)/z < (k+1)
-
- We want to determine b such that this is true for all k in the
- range {0..K} for some maximum K.
-
- Since (ax+b) is an increasing function of x, we can take each
- bound separately to determine the "best" value for b.
-
- (ax+b)/z < (k+1) implies
-
- (a((k+1)y-1)+b < (k+1)z implies
-
- b < a + (k+1)(z-ay) implies
-
- b < a + (k+1)r
-
- This needs to be true for all k in the range {0..K}. In
- particular, it is true for k = 0 and this leads to a maximum
- acceptable value for b.
-
- b < a+r or b <= a+r-1
-
- Taking the other bound, we have
-
- k <= (ax+b)/z implies
-
- k <= (aky+b)/z implies
-
- k(z-ay) <= b implies
-
- kr <= b
-
- Clearly, the largest range for k will be achieved by maximizing b,
- when r is not zero. When r is zero, then the simplest choice for b
- is 0. When r is not 0, set
-
- . b = a+r-1
-
- Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
- for all x in the range:
-
- . 0 <= x < (K+1)y
-
- We need to determine what K is. Of our two bounds,
-
- . b < a+(k+1)r is satisfied for all k >= 0, by construction.
-
- The other bound is
-
- . kr <= b
-
- This is always true if r = 0. If r is not 0 (the usual case), then
- K = floor((a+r-1)/r), is the maximum value for k.
-
- Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
- answer for q(x) = floor(x/y) when x is in the range
-
- (0,(K+1)y-1) K = floor((a+r-1)/r)
-
- To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
- the formula for q'(x) yields the correct value of q(x) for all x
- representable by a single word in HPPA.
-
- We are also constrained in that computing the product (ax), adding
- b, and dividing by z must all be done quickly, otherwise we will be
- better off going through the general algorithm using the DS
- instruction, which uses approximately 70 cycles.
-
- For each y, there is a choice of z which satisfies the constraints
- for (K+1)y >= 2**32. We may not, however, be able to satisfy the
- timing constraints for arbitrary y. It seems that z being equal to
- a power of 2 or a power of 2 minus 1 is as good as we can do, since
- it minimizes the time to do division by z. We want the choice of z
- to also result in a value for (a) that minimizes the computation of
- the product (ax). This is best achieved if (a) has a regular bit
- pattern (so the multiplication can be done with shifts and adds).
- The value of (a) also needs to be less than 2**32 so the product is
- always guaranteed to fit in 2 words.
-
- In actual practice, the following should be done:
-
- 1) For negative x, you should take the absolute value and remember
- . the fact so that the result can be negated. This obviously does
- . not apply in the unsigned case.
- 2) For even y, you should factor out the power of 2 that divides y
- . and divide x by it. You can then proceed by dividing by the
- . odd factor of y.
-
- Here is a table of some odd values of y, and corresponding choices
- for z which are "good".
-
- y z r a (hex) max x (hex)
-
- 3 2**32 1 55555555 100000001
- 5 2**32 1 33333333 100000003
- 7 2**24-1 0 249249 (infinite)
- 9 2**24-1 0 1c71c7 (infinite)
- 11 2**20-1 0 1745d (infinite)
- 13 2**24-1 0 13b13b (infinite)
- 15 2**32 1 11111111 10000000d
- 17 2**32 1 f0f0f0f 10000000f
-
- If r is 1, then b = a+r-1 = a. This simplifies the computation
- of (ax+b), since you can compute (x+1)(a) instead. If r is 0,
- then b = 0 is ok to use which simplifies (ax+b).
-
- The bit patterns for 55555555, 33333333, and 11111111 are obviously
- very regular. The bit patterns for the other values of a above are:
-
- y (hex) (binary)
-
- 7 249249 001001001001001001001001 << regular >>
- 9 1c71c7 000111000111000111000111 << regular >>
- 11 1745d 000000010111010001011101 << irregular >>
- 13 13b13b 000100111011000100111011 << irregular >>
-
- The bit patterns for (a) corresponding to (y) of 11 and 13 may be
- too irregular to warrant using this method.
-
- When z is a power of 2 minus 1, then the division by z is slightly
- more complicated, involving an iterative solution.
-
- The code presented here solves division by 1 through 17, except for
- 11 and 13. There are algorithms for both signed and unsigned
- quantities given.
-
- TIMINGS (cycles)
-
- divisor positive negative unsigned
-
- . 1 2 2 2
- . 2 4 4 2
- . 3 19 21 19
- . 4 4 4 2
- . 5 18 22 19
- . 6 19 22 19
- . 8 4 4 2
- . 10 18 19 17
- . 12 18 20 18
- . 15 16 18 16
- . 16 4 4 2
- . 17 16 18 16
-
- Now, the algorithm for 7, 9, and 14 is an iterative one. That is,
- a loop body is executed until the tentative quotient is 0. The
- number of times the loop body is executed varies depending on the
- dividend, but is never more than two times. If the dividend is
- less than the divisor, then the loop body is not executed at all.
- Each iteration adds 4 cycles to the timings.
-
- divisor positive negative unsigned
-
- . 7 19+4n 20+4n 20+4n n = number of iterations
- . 9 21+4n 22+4n 21+4n
- . 14 21+4n 22+4n 20+4n
-
- To give an idea of how the number of iterations varies, here is a
- table of dividend versus number of iterations when dividing by 7.
-
- smallest largest required
- dividend dividend iterations
-
- . 0 6 0
- . 7 0x6ffffff 1
- 0x1000006 0xffffffff 2
-
- There is some overlap in the range of numbers requiring 1 and 2
- iterations. */
-
-RDEFINE(t2,r1)
-RDEFINE(x2,arg0) /* r26 */
-RDEFINE(t1,arg1) /* r25 */
-RDEFINE(x1,ret1) /* r29 */
-
- SUBSPA_MILLI_DIV
- ATTR_MILLI
-
- .proc
- .callinfo millicode
- .entry
-/* NONE of these routines require a stack frame
- ALL of these routines are unwindable from millicode */
-
-GSYM($$divide_by_constant)
- .export $$divide_by_constant,millicode
-/* Provides a "nice" label for the code covered by the unwind descriptor
- for things like gprof. */
-
-/* DIVISION BY 2 (shift by 1) */
-GSYM($$divI_2)
- .export $$divI_2,millicode
- comclr,>= arg0,0,0
- addi 1,arg0,arg0
- MILLIRET
- extrs arg0,30,31,ret1
-
-
-/* DIVISION BY 4 (shift by 2) */
-GSYM($$divI_4)
- .export $$divI_4,millicode
- comclr,>= arg0,0,0
- addi 3,arg0,arg0
- MILLIRET
- extrs arg0,29,30,ret1
-
-
-/* DIVISION BY 8 (shift by 3) */
-GSYM($$divI_8)
- .export $$divI_8,millicode
- comclr,>= arg0,0,0
- addi 7,arg0,arg0
- MILLIRET
- extrs arg0,28,29,ret1
-
-/* DIVISION BY 16 (shift by 4) */
-GSYM($$divI_16)
- .export $$divI_16,millicode
- comclr,>= arg0,0,0
- addi 15,arg0,arg0
- MILLIRET
- extrs arg0,27,28,ret1
-
-/****************************************************************************
-*
-* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
-*
-* includes 3,5,15,17 and also 6,10,12
-*
-****************************************************************************/
-
-/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
-
-GSYM($$divI_3)
- .export $$divI_3,millicode
- comb,<,N x2,0,LREF(neg3)
-
- addi 1,x2,x2 /* this cannot overflow */
- extru x2,1,2,x1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(pos)
- addc x1,0,x1
-
-LSYM(neg3)
- subi 1,x2,x2 /* this cannot overflow */
- extru x2,1,2,x1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(neg)
- addc x1,0,x1
-
-GSYM($$divU_3)
- .export $$divU_3,millicode
- addi 1,x2,x2 /* this CAN overflow */
- addc 0,0,x1
- shd x1,x2,30,t1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(pos)
- addc x1,t1,x1
-
-/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
-
-GSYM($$divI_5)
- .export $$divI_5,millicode
- comb,<,N x2,0,LREF(neg5)
-
- addi 3,x2,t1 /* this cannot overflow */
- sh1add x2,t1,x2 /* multiply by 3 to get started */
- b LREF(pos)
- addc 0,0,x1
-
-LSYM(neg5)
- sub 0,x2,x2 /* negate x2 */
- addi 1,x2,x2 /* this cannot overflow */
- shd 0,x2,31,x1 /* get top bit (can be 1) */
- sh1add x2,x2,x2 /* multiply by 3 to get started */
- b LREF(neg)
- addc x1,0,x1
-
-GSYM($$divU_5)
- .export $$divU_5,millicode
- addi 1,x2,x2 /* this CAN overflow */
- addc 0,0,x1
- shd x1,x2,31,t1 /* multiply by 3 to get started */
- sh1add x2,x2,x2
- b LREF(pos)
- addc t1,x1,x1
-
-/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */
-GSYM($$divI_6)
- .export $$divI_6,millicode
- comb,<,N x2,0,LREF(neg6)
- extru x2,30,31,x2 /* divide by 2 */
- addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */
- sh2add x2,t1,x2 /* multiply by 5 to get started */
- b LREF(pos)
- addc 0,0,x1
-
-LSYM(neg6)
- subi 2,x2,x2 /* negate, divide by 2, and add 1 */
- /* negation and adding 1 are done */
- /* at the same time by the SUBI */
- extru x2,30,31,x2
- shd 0,x2,30,x1
- sh2add x2,x2,x2 /* multiply by 5 to get started */
- b LREF(neg)
- addc x1,0,x1
-
-GSYM($$divU_6)
- .export $$divU_6,millicode
- extru x2,30,31,x2 /* divide by 2 */
- addi 1,x2,x2 /* cannot carry */
- shd 0,x2,30,x1 /* multiply by 5 to get started */
- sh2add x2,x2,x2
- b LREF(pos)
- addc x1,0,x1
-
-/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
-GSYM($$divU_10)
- .export $$divU_10,millicode
- extru x2,30,31,x2 /* divide by 2 */
- addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */
- sh1add x2,t1,x2 /* multiply by 3 to get started */
- addc 0,0,x1
-LSYM(pos)
- shd x1,x2,28,t1 /* multiply by 0x11 */
- shd x2,0,28,t2
- add x2,t2,x2
- addc x1,t1,x1
-LSYM(pos_for_17)
- shd x1,x2,24,t1 /* multiply by 0x101 */
- shd x2,0,24,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,16,t1 /* multiply by 0x10001 */
- shd x2,0,16,t2
- add x2,t2,x2
- MILLIRET
- addc x1,t1,x1
-
-GSYM($$divI_10)
- .export $$divI_10,millicode
- comb,< x2,0,LREF(neg10)
- copy 0,x1
- extru x2,30,31,x2 /* divide by 2 */
- addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */
- sh1add x2,x2,x2 /* multiply by 3 to get started */
-
-LSYM(neg10)
- subi 2,x2,x2 /* negate, divide by 2, and add 1 */
- /* negation and adding 1 are done */
- /* at the same time by the SUBI */
- extru x2,30,31,x2
- sh1add x2,x2,x2 /* multiply by 3 to get started */
-LSYM(neg)
- shd x1,x2,28,t1 /* multiply by 0x11 */
- shd x2,0,28,t2
- add x2,t2,x2
- addc x1,t1,x1
-LSYM(neg_for_17)
- shd x1,x2,24,t1 /* multiply by 0x101 */
- shd x2,0,24,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,16,t1 /* multiply by 0x10001 */
- shd x2,0,16,t2
- add x2,t2,x2
- addc x1,t1,x1
- MILLIRET
- sub 0,x1,x1
-
-/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
-GSYM($$divI_12)
- .export $$divI_12,millicode
- comb,< x2,0,LREF(neg12)
- copy 0,x1
- extru x2,29,30,x2 /* divide by 4 */
- addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */
- sh2add x2,x2,x2 /* multiply by 5 to get started */
-
-LSYM(neg12)
- subi 4,x2,x2 /* negate, divide by 4, and add 1 */
- /* negation and adding 1 are done */
- /* at the same time by the SUBI */
- extru x2,29,30,x2
- b LREF(neg)
- sh2add x2,x2,x2 /* multiply by 5 to get started */
-
-GSYM($$divU_12)
- .export $$divU_12,millicode
- extru x2,29,30,x2 /* divide by 4 */
- addi 5,x2,t1 /* cannot carry */
- sh2add x2,t1,x2 /* multiply by 5 to get started */
- b LREF(pos)
- addc 0,0,x1
-
-/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
-GSYM($$divI_15)
- .export $$divI_15,millicode
- comb,< x2,0,LREF(neg15)
- copy 0,x1
- addib,tr 1,x2,LREF(pos)+4
- shd x1,x2,28,t1
-
-LSYM(neg15)
- b LREF(neg)
- subi 1,x2,x2
-
-GSYM($$divU_15)
- .export $$divU_15,millicode
- addi 1,x2,x2 /* this CAN overflow */
- b LREF(pos)
- addc 0,0,x1
-
-/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */
-GSYM($$divI_17)
- .export $$divI_17,millicode
- comb,<,n x2,0,LREF(neg17)
- addi 1,x2,x2 /* this cannot overflow */
- shd 0,x2,28,t1 /* multiply by 0xf to get started */
- shd x2,0,28,t2
- sub t2,x2,x2
- b LREF(pos_for_17)
- subb t1,0,x1
-
-LSYM(neg17)
- subi 1,x2,x2 /* this cannot overflow */
- shd 0,x2,28,t1 /* multiply by 0xf to get started */
- shd x2,0,28,t2
- sub t2,x2,x2
- b LREF(neg_for_17)
- subb t1,0,x1
-
-GSYM($$divU_17)
- .export $$divU_17,millicode
- addi 1,x2,x2 /* this CAN overflow */
- addc 0,0,x1
- shd x1,x2,28,t1 /* multiply by 0xf to get started */
-LSYM(u17)
- shd x2,0,28,t2
- sub t2,x2,x2
- b LREF(pos_for_17)
- subb t1,x1,x1
-
-
-/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
- includes 7,9 and also 14
-
-
- z = 2**24-1
- r = z mod x = 0
-
- so choose b = 0
-
- Also, in order to divide by z = 2**24-1, we approximate by dividing
- by (z+1) = 2**24 (which is easy), and then correcting.
-
- (ax) = (z+1)q' + r
- . = zq' + (q'+r)
-
- So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
- Then the true remainder of (ax)/z is (q'+r). Repeat the process
- with this new remainder, adding the tentative quotients together,
- until a tentative quotient is 0 (and then we are done). There is
- one last correction to be done. It is possible that (q'+r) = z.
- If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But,
- in fact, we need to add 1 more to the quotient. Now, it turns
- out that this happens if and only if the original value x is
- an exact multiple of y. So, to avoid a three instruction test at
- the end, instead use 1 instruction to add 1 to x at the beginning. */
-
-/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
-GSYM($$divI_7)
- .export $$divI_7,millicode
- comb,<,n x2,0,LREF(neg7)
-LSYM(7)
- addi 1,x2,x2 /* cannot overflow */
- shd 0,x2,29,x1
- sh3add x2,x2,x2
- addc x1,0,x1
-LSYM(pos7)
- shd x1,x2,26,t1
- shd x2,0,26,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,20,t1
- shd x2,0,20,t2
- add x2,t2,x2
- addc x1,t1,t1
-
- /* computed <t1,x2>. Now divide it by (2**24 - 1) */
-
- copy 0,x1
- shd,= t1,x2,24,t1 /* tentative quotient */
-LSYM(1)
- addb,tr t1,x1,LREF(2) /* add to previous quotient */
- extru x2,31,24,x2 /* new remainder (unadjusted) */
-
- MILLIRETN
-
-LSYM(2)
- addb,tr t1,x2,LREF(1) /* adjust remainder */
- extru,= x2,7,8,t1 /* new quotient */
-
-LSYM(neg7)
- subi 1,x2,x2 /* negate x2 and add 1 */
-LSYM(8)
- shd 0,x2,29,x1
- sh3add x2,x2,x2
- addc x1,0,x1
-
-LSYM(neg7_shift)
- shd x1,x2,26,t1
- shd x2,0,26,t2
- add x2,t2,x2
- addc x1,t1,x1
-
- shd x1,x2,20,t1
- shd x2,0,20,t2
- add x2,t2,x2
- addc x1,t1,t1
-
- /* computed <t1,x2>. Now divide it by (2**24 - 1) */
-
- copy 0,x1
- shd,= t1,x2,24,t1 /* tentative quotient */
-LSYM(3)
- addb,tr t1,x1,LREF(4) /* add to previous quotient */
- extru x2,31,24,x2 /* new remainder (unadjusted) */
-
- MILLIRET
- sub 0,x1,x1 /* negate result */
-
-LSYM(4)
- addb,tr t1,x2,LREF(3) /* adjust remainder */
- extru,= x2,7,8,t1 /* new quotient */
-
-GSYM($$divU_7)
- .export $$divU_7,millicode
- addi 1,x2,x2 /* can carry */
- addc 0,0,x1
- shd x1,x2,29,t1
- sh3add x2,x2,x2
- b LREF(pos7)
- addc t1,x1,x1
-
-/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
-GSYM($$divI_9)
- .export $$divI_9,millicode
- comb,<,n x2,0,LREF(neg9)
- addi 1,x2,x2 /* cannot overflow */
- shd 0,x2,29,t1
- shd x2,0,29,t2
- sub t2,x2,x2
- b LREF(pos7)
- subb t1,0,x1
-
-LSYM(neg9)
- subi 1,x2,x2 /* negate and add 1 */
- shd 0,x2,29,t1
- shd x2,0,29,t2
- sub t2,x2,x2
- b LREF(neg7_shift)
- subb t1,0,x1
-
-GSYM($$divU_9)
- .export $$divU_9,millicode
- addi 1,x2,x2 /* can carry */
- addc 0,0,x1
- shd x1,x2,29,t1
- shd x2,0,29,t2
- sub t2,x2,x2
- b LREF(pos7)
- subb t1,x1,x1
-
-/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
-GSYM($$divI_14)
- .export $$divI_14,millicode
- comb,<,n x2,0,LREF(neg14)
-GSYM($$divU_14)
- .export $$divU_14,millicode
- b LREF(7) /* go to 7 case */
- extru x2,30,31,x2 /* divide by 2 */
-
-LSYM(neg14)
- subi 2,x2,x2 /* negate (and add 2) */
- b LREF(8)
- extru x2,30,31,x2 /* divide by 2 */
- .exit
- .procend
- .end
-#endif
-
-#ifdef L_mulI
-/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
-/******************************************************************************
-This routine is used on PA2.0 processors when gcc -mno-fpregs is used
-
-ROUTINE: $$mulI
-
-
-DESCRIPTION:
-
- $$mulI multiplies two single word integers, giving a single
- word result.
-
-
-INPUT REGISTERS:
-
- arg0 = Operand 1
- arg1 = Operand 2
- r31 == return pc
- sr0 == return space when called externally
-
-
-OUTPUT REGISTERS:
-
- arg0 = undefined
- arg1 = undefined
- ret1 = result
-
-OTHER REGISTERS AFFECTED:
-
- r1 = undefined
-
-SIDE EFFECTS:
-
- Causes a trap under the following conditions: NONE
- Changes memory at the following places: NONE
-
-PERMISSIBLE CONTEXT:
-
- Unwindable
- Does not create a stack frame
- Is usable for internal or external microcode
-
-DISCUSSION:
-
- Calls other millicode routines via mrp: NONE
- Calls other millicode routines: NONE
-
-***************************************************************************/
-
-
-#define a0 %arg0
-#define a1 %arg1
-#define t0 %r1
-#define r %ret1
-
-#define a0__128a0 zdep a0,24,25,a0
-#define a0__256a0 zdep a0,23,24,a0
-#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0)
-#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1)
-#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2)
-#define b_n_ret_t0 b,n LREF(ret_t0)
-#define b_e_shift b LREF(e_shift)
-#define b_e_t0ma0 b LREF(e_t0ma0)
-#define b_e_t0 b LREF(e_t0)
-#define b_e_t0a0 b LREF(e_t0a0)
-#define b_e_t02a0 b LREF(e_t02a0)
-#define b_e_t04a0 b LREF(e_t04a0)
-#define b_e_2t0 b LREF(e_2t0)
-#define b_e_2t0a0 b LREF(e_2t0a0)
-#define b_e_2t04a0 b LREF(e2t04a0)
-#define b_e_3t0 b LREF(e_3t0)
-#define b_e_4t0 b LREF(e_4t0)
-#define b_e_4t0a0 b LREF(e_4t0a0)
-#define b_e_4t08a0 b LREF(e4t08a0)
-#define b_e_5t0 b LREF(e_5t0)
-#define b_e_8t0 b LREF(e_8t0)
-#define b_e_8t0a0 b LREF(e_8t0a0)
-#define r__r_a0 add r,a0,r
-#define r__r_2a0 sh1add a0,r,r
-#define r__r_4a0 sh2add a0,r,r
-#define r__r_8a0 sh3add a0,r,r
-#define r__r_t0 add r,t0,r
-#define r__r_2t0 sh1add t0,r,r
-#define r__r_4t0 sh2add t0,r,r
-#define r__r_8t0 sh3add t0,r,r
-#define t0__3a0 sh1add a0,a0,t0
-#define t0__4a0 sh2add a0,0,t0
-#define t0__5a0 sh2add a0,a0,t0
-#define t0__8a0 sh3add a0,0,t0
-#define t0__9a0 sh3add a0,a0,t0
-#define t0__16a0 zdep a0,27,28,t0
-#define t0__32a0 zdep a0,26,27,t0
-#define t0__64a0 zdep a0,25,26,t0
-#define t0__128a0 zdep a0,24,25,t0
-#define t0__t0ma0 sub t0,a0,t0
-#define t0__t0_a0 add t0,a0,t0
-#define t0__t0_2a0 sh1add a0,t0,t0
-#define t0__t0_4a0 sh2add a0,t0,t0
-#define t0__t0_8a0 sh3add a0,t0,t0
-#define t0__2t0_a0 sh1add t0,a0,t0
-#define t0__3t0 sh1add t0,t0,t0
-#define t0__4t0 sh2add t0,0,t0
-#define t0__4t0_a0 sh2add t0,a0,t0
-#define t0__5t0 sh2add t0,t0,t0
-#define t0__8t0 sh3add t0,0,t0
-#define t0__8t0_a0 sh3add t0,a0,t0
-#define t0__9t0 sh3add t0,t0,t0
-#define t0__16t0 zdep t0,27,28,t0
-#define t0__32t0 zdep t0,26,27,t0
-#define t0__256a0 zdep a0,23,24,t0
-
-
- SUBSPA_MILLI
- ATTR_MILLI
- .align 16
- .proc
- .callinfo millicode
- .export $$mulI,millicode
-GSYM($$mulI)
- combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */
- copy 0,r /* zero out the result */
- xor a0,a1,a0 /* swap a0 & a1 using the */
- xor a0,a1,a1 /* old xor trick */
- xor a0,a1,a0
-LSYM(l4)
- combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */
- zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
- sub,> 0,a1,t0 /* otherwise negate both and */
- combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */
- sub 0,a0,a1
- movb,tr,n t0,a0,LREF(l2) /* 10th inst. */
-
-LSYM(l0) r__r_t0 /* add in this partial product */
-LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */
-LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
-LSYM(l3) blr t0,0 /* case on these 8 bits ****** */
- extru a1,23,24,a1 /* a1 >>= 8 ****************** */
-
-/*16 insts before this. */
-/* a0 <<= 8 ************************** */
-LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop
-LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop
-LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop
-LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0
-LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop
-LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0
-LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
-LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0
-LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop
-LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0
-LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
-LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
-LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
-LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
-LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0
-LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0
-LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
-LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0
-LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
-LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
-LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
-LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
-LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0
-LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
-LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
-LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0
-LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
-LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
-LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
-LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
-LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
-LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0
-LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0
-LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0
-LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0
-LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
-LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0
-LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
-LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0
-LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
-LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
-LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
-LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0
-LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
-LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0
-LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0
-LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0
-LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0
-LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
-LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0
-LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0
-LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
-LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0
-LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
-LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
-LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0
-LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0
-LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
-LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0
-LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0
-LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0
-LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0
-LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
-LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0
-LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0
-LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
-LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
-LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
-LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
-LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0
-LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0
-LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0
-LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0
-LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0
-LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0
-LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0
-LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
-LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0
-LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0
-LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0
-LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0
-LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0
-LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
-LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0
-LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0
-LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0
-LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0
-LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0
-LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0
-LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0
-LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0
-LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0
-LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
-LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0
-LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0
-LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0
-LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0
-LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0
-LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
-LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0
-LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
-LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0
-LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
-LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0
-LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0
-LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
-LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0
-LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
-LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0
-LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0
-LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0
-LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0
-LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0
-LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0
-LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0
-LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0
-LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
-LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0
-LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0
-LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0
-LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
-LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0
-LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0
-LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
-LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0
-LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0
-LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
-LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0
-LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0
-LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0
-LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0
-LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0
-LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0
-LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0
-LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0
-LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0
-LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0
-LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0
-LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0
-LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0
-LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0
-LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0
-LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0
-LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0
-LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0
-LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
-LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
-LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-/*1040 insts before this. */
-LSYM(ret_t0) MILLIRET
-LSYM(e_t0) r__r_t0
-LSYM(e_shift) a1_ne_0_b_l2
- a0__256a0 /* a0 <<= 8 *********** */
- MILLIRETN
-LSYM(e_t0ma0) a1_ne_0_b_l0
- t0__t0ma0
- MILLIRET
- r__r_t0
-LSYM(e_t0a0) a1_ne_0_b_l0
- t0__t0_a0
- MILLIRET
- r__r_t0
-LSYM(e_t02a0) a1_ne_0_b_l0
- t0__t0_2a0
- MILLIRET
- r__r_t0
-LSYM(e_t04a0) a1_ne_0_b_l0
- t0__t0_4a0
- MILLIRET
- r__r_t0
-LSYM(e_2t0) a1_ne_0_b_l1
- r__r_2t0
- MILLIRETN
-LSYM(e_2t0a0) a1_ne_0_b_l0
- t0__2t0_a0
- MILLIRET
- r__r_t0
-LSYM(e2t04a0) t0__t0_2a0
- a1_ne_0_b_l1
- r__r_2t0
- MILLIRETN
-LSYM(e_3t0) a1_ne_0_b_l0
- t0__3t0
- MILLIRET
- r__r_t0
-LSYM(e_4t0) a1_ne_0_b_l1
- r__r_4t0
- MILLIRETN
-LSYM(e_4t0a0) a1_ne_0_b_l0
- t0__4t0_a0
- MILLIRET
- r__r_t0
-LSYM(e4t08a0) t0__t0_2a0
- a1_ne_0_b_l1
- r__r_4t0
- MILLIRETN
-LSYM(e_5t0) a1_ne_0_b_l0
- t0__5t0
- MILLIRET
- r__r_t0
-LSYM(e_8t0) a1_ne_0_b_l1
- r__r_8t0
- MILLIRETN
-LSYM(e_8t0a0) a1_ne_0_b_l0
- t0__8t0_a0
- MILLIRET
- r__r_t0
-
- .procend
- .end
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#ifndef _PA_MILLI_H_
-#define _PA_MILLI_H_
-
-#define L_dyncall
-#define L_divI
-#define L_divU
-#define L_remI
-#define L_remU
-#define L_div_const
-#define L_mulI
-
-#ifdef CONFIG_64BIT
- .level 2.0w
-#endif
-
-/* Hardware General Registers. */
-r0: .reg %r0
-r1: .reg %r1
-r2: .reg %r2
-r3: .reg %r3
-r4: .reg %r4
-r5: .reg %r5
-r6: .reg %r6
-r7: .reg %r7
-r8: .reg %r8
-r9: .reg %r9
-r10: .reg %r10
-r11: .reg %r11
-r12: .reg %r12
-r13: .reg %r13
-r14: .reg %r14
-r15: .reg %r15
-r16: .reg %r16
-r17: .reg %r17
-r18: .reg %r18
-r19: .reg %r19
-r20: .reg %r20
-r21: .reg %r21
-r22: .reg %r22
-r23: .reg %r23
-r24: .reg %r24
-r25: .reg %r25
-r26: .reg %r26
-r27: .reg %r27
-r28: .reg %r28
-r29: .reg %r29
-r30: .reg %r30
-r31: .reg %r31
-
-/* Hardware Space Registers. */
-sr0: .reg %sr0
-sr1: .reg %sr1
-sr2: .reg %sr2
-sr3: .reg %sr3
-sr4: .reg %sr4
-sr5: .reg %sr5
-sr6: .reg %sr6
-sr7: .reg %sr7
-
-/* Hardware Floating Point Registers. */
-fr0: .reg %fr0
-fr1: .reg %fr1
-fr2: .reg %fr2
-fr3: .reg %fr3
-fr4: .reg %fr4
-fr5: .reg %fr5
-fr6: .reg %fr6
-fr7: .reg %fr7
-fr8: .reg %fr8
-fr9: .reg %fr9
-fr10: .reg %fr10
-fr11: .reg %fr11
-fr12: .reg %fr12
-fr13: .reg %fr13
-fr14: .reg %fr14
-fr15: .reg %fr15
-
-/* Hardware Control Registers. */
-cr11: .reg %cr11
-sar: .reg %cr11 /* Shift Amount Register */
-
-/* Software Architecture General Registers. */
-rp: .reg r2 /* return pointer */
-#ifdef CONFIG_64BIT
-mrp: .reg r2 /* millicode return pointer */
-#else
-mrp: .reg r31 /* millicode return pointer */
-#endif
-ret0: .reg r28 /* return value */
-ret1: .reg r29 /* return value (high part of double) */
-sp: .reg r30 /* stack pointer */
-dp: .reg r27 /* data pointer */
-arg0: .reg r26 /* argument */
-arg1: .reg r25 /* argument or high part of double argument */
-arg2: .reg r24 /* argument */
-arg3: .reg r23 /* argument or high part of double argument */
-
-/* Software Architecture Space Registers. */
-/* sr0 ; return link from BLE */
-sret: .reg sr1 /* return value */
-sarg: .reg sr1 /* argument */
-/* sr4 ; PC SPACE tracker */
-/* sr5 ; process private data */
-
-/* Frame Offsets (millicode convention!) Used when calling other
- millicode routines. Stack unwinding is dependent upon these
- definitions. */
-r31_slot: .equ -20 /* "current RP" slot */
-sr0_slot: .equ -16 /* "static link" slot */
-#if defined(CONFIG_64BIT)
-mrp_slot: .equ -16 /* "current RP" slot */
-psp_slot: .equ -8 /* "previous SP" slot */
-#else
-mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */
-#endif
-
-
-#define DEFINE(name,value)name: .EQU value
-#define RDEFINE(name,value)name: .REG value
-#ifdef milliext
-#define MILLI_BE(lbl) BE lbl(sr7,r0)
-#define MILLI_BEN(lbl) BE,n lbl(sr7,r0)
-#define MILLI_BLE(lbl) BLE lbl(sr7,r0)
-#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0)
-#define MILLIRETN BE,n 0(sr0,mrp)
-#define MILLIRET BE 0(sr0,mrp)
-#define MILLI_RETN BE,n 0(sr0,mrp)
-#define MILLI_RET BE 0(sr0,mrp)
-#else
-#define MILLI_BE(lbl) B lbl
-#define MILLI_BEN(lbl) B,n lbl
-#define MILLI_BLE(lbl) BL lbl,mrp
-#define MILLI_BLEN(lbl) BL,n lbl,mrp
-#define MILLIRETN BV,n 0(mrp)
-#define MILLIRET BV 0(mrp)
-#define MILLI_RETN BV,n 0(mrp)
-#define MILLI_RET BV 0(mrp)
-#endif
-
-#define CAT(a,b) a##b
-
-#define SUBSPA_MILLI .section .text
-#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
-#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
-#define ATTR_MILLI
-#define SUBSPA_DATA .section .data
-#define ATTR_DATA
-#define GLOBAL $global$
-#define GSYM(sym) !sym:
-#define LSYM(sym) !CAT(.L,sym:)
-#define LREF(sym) CAT(.L,sym)
-
-#endif /*_PA_MILLI_H_*/
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_mulI
-/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
-/******************************************************************************
-This routine is used on PA2.0 processors when gcc -mno-fpregs is used
-
-ROUTINE: $$mulI
-
-
-DESCRIPTION:
-
- $$mulI multiplies two single word integers, giving a single
- word result.
-
-
-INPUT REGISTERS:
-
- arg0 = Operand 1
- arg1 = Operand 2
- r31 == return pc
- sr0 == return space when called externally
-
-
-OUTPUT REGISTERS:
-
- arg0 = undefined
- arg1 = undefined
- ret1 = result
-
-OTHER REGISTERS AFFECTED:
-
- r1 = undefined
-
-SIDE EFFECTS:
-
- Causes a trap under the following conditions: NONE
- Changes memory at the following places: NONE
-
-PERMISSIBLE CONTEXT:
-
- Unwindable
- Does not create a stack frame
- Is usable for internal or external microcode
-
-DISCUSSION:
-
- Calls other millicode routines via mrp: NONE
- Calls other millicode routines: NONE
-
-***************************************************************************/
-
-
-#define a0 %arg0
-#define a1 %arg1
-#define t0 %r1
-#define r %ret1
-
-#define a0__128a0 zdep a0,24,25,a0
-#define a0__256a0 zdep a0,23,24,a0
-#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0)
-#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1)
-#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2)
-#define b_n_ret_t0 b,n LREF(ret_t0)
-#define b_e_shift b LREF(e_shift)
-#define b_e_t0ma0 b LREF(e_t0ma0)
-#define b_e_t0 b LREF(e_t0)
-#define b_e_t0a0 b LREF(e_t0a0)
-#define b_e_t02a0 b LREF(e_t02a0)
-#define b_e_t04a0 b LREF(e_t04a0)
-#define b_e_2t0 b LREF(e_2t0)
-#define b_e_2t0a0 b LREF(e_2t0a0)
-#define b_e_2t04a0 b LREF(e2t04a0)
-#define b_e_3t0 b LREF(e_3t0)
-#define b_e_4t0 b LREF(e_4t0)
-#define b_e_4t0a0 b LREF(e_4t0a0)
-#define b_e_4t08a0 b LREF(e4t08a0)
-#define b_e_5t0 b LREF(e_5t0)
-#define b_e_8t0 b LREF(e_8t0)
-#define b_e_8t0a0 b LREF(e_8t0a0)
-#define r__r_a0 add r,a0,r
-#define r__r_2a0 sh1add a0,r,r
-#define r__r_4a0 sh2add a0,r,r
-#define r__r_8a0 sh3add a0,r,r
-#define r__r_t0 add r,t0,r
-#define r__r_2t0 sh1add t0,r,r
-#define r__r_4t0 sh2add t0,r,r
-#define r__r_8t0 sh3add t0,r,r
-#define t0__3a0 sh1add a0,a0,t0
-#define t0__4a0 sh2add a0,0,t0
-#define t0__5a0 sh2add a0,a0,t0
-#define t0__8a0 sh3add a0,0,t0
-#define t0__9a0 sh3add a0,a0,t0
-#define t0__16a0 zdep a0,27,28,t0
-#define t0__32a0 zdep a0,26,27,t0
-#define t0__64a0 zdep a0,25,26,t0
-#define t0__128a0 zdep a0,24,25,t0
-#define t0__t0ma0 sub t0,a0,t0
-#define t0__t0_a0 add t0,a0,t0
-#define t0__t0_2a0 sh1add a0,t0,t0
-#define t0__t0_4a0 sh2add a0,t0,t0
-#define t0__t0_8a0 sh3add a0,t0,t0
-#define t0__2t0_a0 sh1add t0,a0,t0
-#define t0__3t0 sh1add t0,t0,t0
-#define t0__4t0 sh2add t0,0,t0
-#define t0__4t0_a0 sh2add t0,a0,t0
-#define t0__5t0 sh2add t0,t0,t0
-#define t0__8t0 sh3add t0,0,t0
-#define t0__8t0_a0 sh3add t0,a0,t0
-#define t0__9t0 sh3add t0,t0,t0
-#define t0__16t0 zdep t0,27,28,t0
-#define t0__32t0 zdep t0,26,27,t0
-#define t0__256a0 zdep a0,23,24,t0
-
-
- SUBSPA_MILLI
- ATTR_MILLI
- .align 16
- .proc
- .callinfo millicode
- .export $$mulI,millicode
-GSYM($$mulI)
- combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */
- copy 0,r /* zero out the result */
- xor a0,a1,a0 /* swap a0 & a1 using the */
- xor a0,a1,a1 /* old xor trick */
- xor a0,a1,a0
-LSYM(l4)
- combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */
- zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
- sub,> 0,a1,t0 /* otherwise negate both and */
- combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */
- sub 0,a0,a1
- movb,tr,n t0,a0,LREF(l2) /* 10th inst. */
-
-LSYM(l0) r__r_t0 /* add in this partial product */
-LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */
-LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
-LSYM(l3) blr t0,0 /* case on these 8 bits ****** */
- extru a1,23,24,a1 /* a1 >>= 8 ****************** */
-
-/*16 insts before this. */
-/* a0 <<= 8 ************************** */
-LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop
-LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop
-LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop
-LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0
-LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop
-LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0
-LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
-LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0
-LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop
-LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0
-LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
-LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
-LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
-LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
-LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0
-LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0
-LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
-LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0
-LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
-LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
-LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
-LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
-LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0
-LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
-LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
-LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0
-LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
-LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
-LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
-LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
-LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
-LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0
-LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0
-LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0
-LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0
-LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
-LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0
-LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
-LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0
-LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
-LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
-LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
-LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0
-LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
-LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0
-LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0
-LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0
-LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0
-LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
-LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0
-LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0
-LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
-LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0
-LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
-LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
-LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0
-LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0
-LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
-LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0
-LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0
-LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0
-LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0
-LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
-LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0
-LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0
-LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
-LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
-LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
-LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
-LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
-LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0
-LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0
-LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0
-LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0
-LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0
-LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0
-LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0
-LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
-LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
-LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0
-LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0
-LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0
-LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0
-LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0
-LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0
-LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0
-LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
-LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
-LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0
-LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0
-LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0
-LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0
-LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0
-LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0
-LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0
-LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0
-LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0
-LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
-LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0
-LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0
-LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0
-LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0
-LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0
-LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0
-LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
-LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0
-LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0
-LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
-LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0
-LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
-LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0
-LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0
-LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
-LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0
-LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0
-LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
-LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0
-LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0
-LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0
-LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0
-LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0
-LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0
-LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0
-LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0
-LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
-LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
-LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
-LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0
-LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0
-LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0
-LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0
-LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
-LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0
-LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0
-LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
-LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0
-LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0
-LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
-LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0
-LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0
-LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0
-LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0
-LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0
-LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0
-LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0
-LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0
-LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0
-LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0
-LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0
-LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0
-LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0
-LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0
-LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0
-LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0
-LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0
-LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0
-LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0
-LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0
-LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
-LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0
-LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
-LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
-/*1040 insts before this. */
-LSYM(ret_t0) MILLIRET
-LSYM(e_t0) r__r_t0
-LSYM(e_shift) a1_ne_0_b_l2
- a0__256a0 /* a0 <<= 8 *********** */
- MILLIRETN
-LSYM(e_t0ma0) a1_ne_0_b_l0
- t0__t0ma0
- MILLIRET
- r__r_t0
-LSYM(e_t0a0) a1_ne_0_b_l0
- t0__t0_a0
- MILLIRET
- r__r_t0
-LSYM(e_t02a0) a1_ne_0_b_l0
- t0__t0_2a0
- MILLIRET
- r__r_t0
-LSYM(e_t04a0) a1_ne_0_b_l0
- t0__t0_4a0
- MILLIRET
- r__r_t0
-LSYM(e_2t0) a1_ne_0_b_l1
- r__r_2t0
- MILLIRETN
-LSYM(e_2t0a0) a1_ne_0_b_l0
- t0__2t0_a0
- MILLIRET
- r__r_t0
-LSYM(e2t04a0) t0__t0_2a0
- a1_ne_0_b_l1
- r__r_2t0
- MILLIRETN
-LSYM(e_3t0) a1_ne_0_b_l0
- t0__3t0
- MILLIRET
- r__r_t0
-LSYM(e_4t0) a1_ne_0_b_l1
- r__r_4t0
- MILLIRETN
-LSYM(e_4t0a0) a1_ne_0_b_l0
- t0__4t0_a0
- MILLIRET
- r__r_t0
-LSYM(e4t08a0) t0__t0_2a0
- a1_ne_0_b_l1
- r__r_4t0
- MILLIRETN
-LSYM(e_5t0) a1_ne_0_b_l0
- t0__5t0
- MILLIRET
- r__r_t0
-LSYM(e_8t0) a1_ne_0_b_l1
- r__r_8t0
- MILLIRETN
-LSYM(e_8t0a0) a1_ne_0_b_l0
- t0__8t0_a0
- MILLIRET
- r__r_t0
-
- .procend
- .end
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_remI
-/* ROUTINE: $$remI
-
- DESCRIPTION:
- . $$remI returns the remainder of the division of two signed 32-bit
- . integers. The sign of the remainder is the same as the sign of
- . the dividend.
-
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = destroyed
- . arg1 = destroyed
- . ret1 = remainder
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions: DIVIDE BY ZERO
- . Changes memory at the following places: NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable
- . Does not create a stack frame
- . Is usable for internal or external microcode
-
- DISCUSSION:
- . Calls other millicode routines via mrp: NONE
- . Calls other millicode routines: NONE */
-
-RDEFINE(tmp,r1)
-RDEFINE(retreg,ret1)
-
- SUBSPA_MILLI
- ATTR_MILLI
- .proc
- .callinfo millicode
- .entry
-GSYM($$remI)
-GSYM($$remoI)
- .export $$remI,MILLICODE
- .export $$remoI,MILLICODE
- ldo -1(arg1),tmp /* is there at most one bit set ? */
- and,<> arg1,tmp,r0 /* if not, don't use power of 2 */
- addi,> 0,arg1,r0 /* if denominator > 0, use power */
- /* of 2 */
- b,n LREF(neg_denom)
-LSYM(pow2)
- comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */
- and arg0,tmp,retreg /* get the result */
- MILLIRETN
-LSYM(neg_num)
- subi 0,arg0,arg0 /* negate numerator */
- and arg0,tmp,retreg /* get the result */
- subi 0,retreg,retreg /* negate result */
- MILLIRETN
-LSYM(neg_denom)
- addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */
- /* of 2 */
- b,n LREF(regular_seq)
- sub r0,arg1,tmp /* make denominator positive */
- comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */
- ldo -1(tmp),retreg /* is there at most one bit set ? */
- and,= tmp,retreg,r0 /* if not, go to regular_seq */
- b,n LREF(regular_seq)
- comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */
- and arg0,retreg,retreg
- MILLIRETN
-LSYM(neg_num_2)
- subi 0,arg0,tmp /* test against 0x80000000 */
- and tmp,retreg,retreg
- subi 0,retreg,retreg
- MILLIRETN
-LSYM(regular_seq)
- addit,= 0,arg1,0 /* trap if div by zero */
- add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
- sub 0,retreg,retreg /* make it positive */
- sub 0,arg1, tmp /* clear carry, */
- /* negate the divisor */
- ds 0, tmp,0 /* set V-bit to the comple- */
- /* ment of the divisor sign */
- or 0,0, tmp /* clear tmp */
- add retreg,retreg,retreg /* shift msb bit into carry */
- ds tmp,arg1, tmp /* 1st divide step, if no carry */
- /* out, msb of quotient = 0 */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
-LSYM(t1)
- ds tmp,arg1, tmp /* 2nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 3rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 4th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 5th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 6th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 7th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 8th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 9th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 10th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 11th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 12th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 13th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 14th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 15th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 16th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 17th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 18th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 19th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 20th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 21st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 22nd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 23rd divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 24th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 25th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 26th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 27th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 28th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 29th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 30th divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 31st divide step */
- addc retreg,retreg,retreg /* shift retreg with/into carry */
- ds tmp,arg1, tmp /* 32nd divide step, */
- addc retreg,retreg,retreg /* shift last bit into retreg */
- movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */
- add,< arg1,0,0 /* if arg1 > 0, add arg1 */
- add,tr tmp,arg1,retreg /* for correcting remainder tmp */
- sub tmp,arg1,retreg /* else add absolute value arg1 */
-LSYM(finish)
- add,>= arg0,0,0 /* set sign of remainder */
- sub 0,retreg,retreg /* to sign of dividend */
- MILLIRET
- nop
- .exit
- .procend
-#ifdef milliext
- .origin 0x00000200
-#endif
- .end
-#endif
+++ /dev/null
-/* 32 and 64-bit millicode, original author Hewlett-Packard
- adapted for gcc by Paul Bame <bame@debian.org>
- and Alan Modra <alan@linuxcare.com.au>.
-
- Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
-
- This file is part of GCC and is released under the terms of
- of the GNU General Public License as published by the Free Software
- Foundation; either version 2, or (at your option) any later version.
- See the file COPYING in the top-level GCC source directory for a copy
- of the license. */
-
-#include "milli.h"
-
-#ifdef L_remU
-/* ROUTINE: $$remU
- . Single precision divide for remainder with unsigned binary integers.
- .
- . The remainder must be dividend-(dividend/divisor)*divisor.
- . Divide by zero is trapped.
-
- INPUT REGISTERS:
- . arg0 == dividend
- . arg1 == divisor
- . mrp == return pc
- . sr0 == return space when called externally
-
- OUTPUT REGISTERS:
- . arg0 = undefined
- . arg1 = undefined
- . ret1 = remainder
-
- OTHER REGISTERS AFFECTED:
- . r1 = undefined
-
- SIDE EFFECTS:
- . Causes a trap under the following conditions: DIVIDE BY ZERO
- . Changes memory at the following places: NONE
-
- PERMISSIBLE CONTEXT:
- . Unwindable.
- . Does not create a stack frame.
- . Suitable for internal or external millicode.
- . Assumes the special millicode register conventions.
-
- DISCUSSION:
- . Calls other millicode routines using mrp: NONE
- . Calls other millicode routines: NONE */
-
-
-RDEFINE(temp,r1)
-RDEFINE(rmndr,ret1) /* r29 */
- SUBSPA_MILLI
- ATTR_MILLI
- .export $$remU,millicode
- .proc
- .callinfo millicode
- .entry
-GSYM($$remU)
- ldo -1(arg1),temp /* is there at most one bit set ? */
- and,= arg1,temp,r0 /* if not, don't use power of 2 */
- b LREF(regular_seq)
- addit,= 0,arg1,r0 /* trap on div by zero */
- and arg0,temp,rmndr /* get the result for power of 2 */
- MILLIRETN
-LSYM(regular_seq)
- comib,>=,n 0,arg1,LREF(special_case)
- subi 0,arg1,rmndr /* clear carry, negate the divisor */
- ds r0,rmndr,r0 /* set V-bit to 1 */
- add arg0,arg0,temp /* shift msb bit into carry */
- ds r0,arg1,rmndr /* 1st divide step, if no carry */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 2nd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 3rd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 4th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 5th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 6th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 7th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 8th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 9th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 10th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 11th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 12th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 13th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 14th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 15th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 16th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 17th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 18th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 19th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 20th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 21st divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 22nd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 23rd divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 24th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 25th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 26th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 27th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 28th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 29th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 30th divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 31st divide step */
- addc temp,temp,temp /* shift temp with/into carry */
- ds rmndr,arg1,rmndr /* 32nd divide step, */
- comiclr,<= 0,rmndr,r0
- add rmndr,arg1,rmndr /* correction */
- MILLIRETN
- nop
-
-/* Putting >= on the last DS and deleting COMICLR does not work! */
-LSYM(special_case)
- sub,>>= arg0,arg1,rmndr
- copy arg0,rmndr
- MILLIRETN
- nop
- .exit
- .procend
- .end
-#endif
default "9" if PPC_64K_PAGES
default "13"
+config HUGETLB_PAGE_SIZE_VARIABLE
+ bool
+ depends on HUGETLB_PAGE
+ default y
+
config MATH_EMULATION
bool "Math emulation"
depends on 4xx || 8xx || E200 || PPC_MPC832x || E500
};
i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = < &ipic >;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <68>;
+ };
};
serial@4500 {
reg = <700 100>;
device_type = "ipic";
};
-
+
par_io@1400 {
reg = <1400 100>;
device_type = "par_io";
3 5 1 0 2 0 /* MDC */
0 d 2 0 1 0 /* RX_CLK (CLK9) */
3 18 2 0 1 0 /* TX_CLK (CLK10) */
- 1 1 1 0 1 0 /* TxD1 */
1 0 1 0 1 0 /* TxD0 */
1 1 1 0 1 0 /* TxD1 */
1 2 1 0 1 0 /* TxD2 */
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
-
+
muram@10000 {
device_type = "muram";
ranges = <0 00010000 00004000>;
-
+
data-only@0 {
reg = <0 4000>;
};
compatible = "ucc_geth";
model = "UCC";
device-id = <4>;
- reg = <3000 200>;
+ reg = <3200 200>;
interrupts = <23>;
interrupt-parent = < &qeic >;
/*
};
i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = < &ipic >;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <68>;
+ };
};
i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
};
i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = < &ipic >;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <68>;
+ };
};
i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
- interrupt-map-mask = <fb00 0 0 0>;
+ interrupt-map-mask = <ff00 0 0 1>;
interrupt-map = <
// IDSEL 0x1c USB
- e000 0 0 0 &i8259 c 2
- e100 0 0 0 &i8259 9 2
- e200 0 0 0 &i8259 a 2
- e300 0 0 0 &i8259 b 2
+ e000 0 0 1 &i8259 c 2
+ e100 0 0 1 &i8259 9 2
+ e200 0 0 1 &i8259 a 2
+ e300 0 0 1 &i8259 b 2
// IDSEL 0x1d Audio
- e800 0 0 0 &i8259 6 2
+ e800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
- f000 0 0 0 &i8259 7 2
- f100 0 0 0 &i8259 7 2
+ f000 0 0 1 &i8259 7 2
+ f100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
- f800 0 0 0 &i8259 e 2
- f900 0 0 0 &i8259 5 2
+ f800 0 0 1 &i8259 e 2
+ f900 0 0 1 &i8259 5 2
>;
pcie@0 {
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
- interrupt-map-mask = <fb00 0 0 0>;
+ interrupt-map-mask = <ff00 0 0 7>;
interrupt-map = <
- /* IDSEL 0x11 - PCI slot 1 */
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
8800 0 0 1 &mpic 2 1
8800 0 0 2 &mpic 3 1
8800 0 0 3 &mpic 4 1
8800 0 0 4 &mpic 1 1
- /* IDSEL 0x12 - PCI slot 2 */
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 8900 0 0 1 &mpic 2 1
+ 8900 0 0 2 &mpic 3 1
+ 8900 0 0 3 &mpic 4 1
+ 8900 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 8a00 0 0 1 &mpic 2 1
+ 8a00 0 0 2 &mpic 3 1
+ 8a00 0 0 3 &mpic 4 1
+ 8a00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 8b00 0 0 1 &mpic 2 1
+ 8b00 0 0 2 &mpic 3 1
+ 8b00 0 0 3 &mpic 4 1
+ 8b00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 8c00 0 0 1 &mpic 2 1
+ 8c00 0 0 2 &mpic 3 1
+ 8c00 0 0 3 &mpic 4 1
+ 8c00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 8d00 0 0 1 &mpic 2 1
+ 8d00 0 0 2 &mpic 3 1
+ 8d00 0 0 3 &mpic 4 1
+ 8d00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 8e00 0 0 1 &mpic 2 1
+ 8e00 0 0 2 &mpic 3 1
+ 8e00 0 0 3 &mpic 4 1
+ 8e00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 8f00 0 0 1 &mpic 2 1
+ 8f00 0 0 2 &mpic 3 1
+ 8f00 0 0 3 &mpic 4 1
+ 8f00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
9000 0 0 1 &mpic 3 1
9000 0 0 2 &mpic 4 1
9000 0 0 3 &mpic 1 1
9000 0 0 4 &mpic 2 1
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 9100 0 0 1 &mpic 3 1
+ 9100 0 0 2 &mpic 4 1
+ 9100 0 0 3 &mpic 1 1
+ 9100 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 9200 0 0 1 &mpic 3 1
+ 9200 0 0 2 &mpic 4 1
+ 9200 0 0 3 &mpic 1 1
+ 9200 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 9300 0 0 1 &mpic 3 1
+ 9300 0 0 2 &mpic 4 1
+ 9300 0 0 3 &mpic 1 1
+ 9300 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 9400 0 0 1 &mpic 3 1
+ 9400 0 0 2 &mpic 4 1
+ 9400 0 0 3 &mpic 1 1
+ 9400 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 9500 0 0 1 &mpic 3 1
+ 9500 0 0 2 &mpic 4 1
+ 9500 0 0 3 &mpic 1 1
+ 9500 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 9600 0 0 1 &mpic 3 1
+ 9600 0 0 2 &mpic 4 1
+ 9600 0 0 3 &mpic 1 1
+ 9600 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 9700 0 0 1 &mpic 3 1
+ 9700 0 0 2 &mpic 4 1
+ 9700 0 0 3 &mpic 1 1
+ 9700 0 0 4 &mpic 2 1
+
// IDSEL 0x1c USB
- e000 0 0 0 &i8259 c 2
- e100 0 0 0 &i8259 9 2
- e200 0 0 0 &i8259 a 2
- e300 0 0 0 &i8259 b 2
+ e000 0 0 1 &i8259 c 2
+ e100 0 0 1 &i8259 9 2
+ e200 0 0 1 &i8259 a 2
+ e300 0 0 1 &i8259 b 2
// IDSEL 0x1d Audio
- e800 0 0 0 &i8259 6 2
+ e800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
- f000 0 0 0 &i8259 7 2
- f100 0 0 0 &i8259 7 2
+ f000 0 0 1 &i8259 7 2
+ f100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
- f800 0 0 0 &i8259 e 2
- f900 0 0 0 &i8259 5 2
+ f800 0 0 1 &i8259 e 2
+ f900 0 0 1 &i8259 5 2
>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
- interrupt-map-mask = <fb00 0 0 0>;
+ interrupt-map-mask = <ff00 0 0 7>;
interrupt-map = <
- /* IDSEL 0x11 */
- 8800 0 0 1 &i8259 9 2
- 8800 0 0 2 &i8259 a 2
- 8800 0 0 3 &i8259 b 2
- 8800 0 0 4 &i8259 c 2
-
- /* IDSEL 0x12 */
- 9000 0 0 1 &i8259 a 2
- 9000 0 0 2 &i8259 b 2
- 9000 0 0 3 &i8259 c 2
- 9000 0 0 4 &i8259 9 2
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 8800 0 0 1 &mpic 2 1
+ 8800 0 0 2 &mpic 3 1
+ 8800 0 0 3 &mpic 4 1
+ 8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 8900 0 0 1 &mpic 2 1
+ 8900 0 0 2 &mpic 3 1
+ 8900 0 0 3 &mpic 4 1
+ 8900 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 8a00 0 0 1 &mpic 2 1
+ 8a00 0 0 2 &mpic 3 1
+ 8a00 0 0 3 &mpic 4 1
+ 8a00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 8b00 0 0 1 &mpic 2 1
+ 8b00 0 0 2 &mpic 3 1
+ 8b00 0 0 3 &mpic 4 1
+ 8b00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 8c00 0 0 1 &mpic 2 1
+ 8c00 0 0 2 &mpic 3 1
+ 8c00 0 0 3 &mpic 4 1
+ 8c00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 8d00 0 0 1 &mpic 2 1
+ 8d00 0 0 2 &mpic 3 1
+ 8d00 0 0 3 &mpic 4 1
+ 8d00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 8e00 0 0 1 &mpic 2 1
+ 8e00 0 0 2 &mpic 3 1
+ 8e00 0 0 3 &mpic 4 1
+ 8e00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 8f00 0 0 1 &mpic 2 1
+ 8f00 0 0 2 &mpic 3 1
+ 8f00 0 0 3 &mpic 4 1
+ 8f00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 9000 0 0 1 &mpic 3 1
+ 9000 0 0 2 &mpic 4 1
+ 9000 0 0 3 &mpic 1 1
+ 9000 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 9100 0 0 1 &mpic 3 1
+ 9100 0 0 2 &mpic 4 1
+ 9100 0 0 3 &mpic 1 1
+ 9100 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 9200 0 0 1 &mpic 3 1
+ 9200 0 0 2 &mpic 4 1
+ 9200 0 0 3 &mpic 1 1
+ 9200 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 9300 0 0 1 &mpic 3 1
+ 9300 0 0 2 &mpic 4 1
+ 9300 0 0 3 &mpic 1 1
+ 9300 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 9400 0 0 1 &mpic 3 1
+ 9400 0 0 2 &mpic 4 1
+ 9400 0 0 3 &mpic 1 1
+ 9400 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 9500 0 0 1 &mpic 3 1
+ 9500 0 0 2 &mpic 4 1
+ 9500 0 0 3 &mpic 1 1
+ 9500 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 9600 0 0 1 &mpic 3 1
+ 9600 0 0 2 &mpic 4 1
+ 9600 0 0 3 &mpic 1 1
+ 9600 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 9700 0 0 1 &mpic 3 1
+ 9700 0 0 2 &mpic 4 1
+ 9700 0 0 3 &mpic 1 1
+ 9700 0 0 4 &mpic 2 1
// IDSEL 0x1c USB
- e000 0 0 0 &i8259 c 2
- e100 0 0 0 &i8259 9 2
- e200 0 0 0 &i8259 a 2
- e300 0 0 0 &i8259 b 2
+ e000 0 0 1 &i8259 c 2
+ e100 0 0 1 &i8259 9 2
+ e200 0 0 1 &i8259 a 2
+ e300 0 0 1 &i8259 b 2
// IDSEL 0x1d Audio
- e800 0 0 0 &i8259 6 2
+ e800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
- f000 0 0 0 &i8259 7 2
- f100 0 0 0 &i8259 7 2
+ f000 0 0 1 &i8259 7 2
+ f100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
- f800 0 0 0 &i8259 e 2
- f900 0 0 0 &i8259 5 2
+ f800 0 0 1 &i8259 e 2
+ f900 0 0 1 &i8259 5 2
>;
pcie@0 {
device_type = "rgmii-interface";
compatible = "ibm,rgmii-440epx", "ibm,rgmii";
reg = <ef601000 8>;
+ has-mdio;
};
EMAC0: ethernet@ef600e00 {
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
};
EMAC1: ethernet@ef600f00 {
zmii-channel = <1>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
};
};
};
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 19 09:01:11 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:04 2007
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc3
-# Wed Aug 22 15:19:19 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:05 2007
#
CONFIG_PPC64=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
+CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_CGROUP_CPUACCT is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
#
# Kernel options
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CELLEB=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_WATCHDOG_RTAS is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
CONFIG_EDAC_MM_EDAC=y
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
-CONFIG_OPROFILE_CELL=y
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:32:07 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:07 2007
#
CONFIG_PPC64=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
+CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
+CONFIG_PPC_INDIRECT_IO=y
+CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CELLEB=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_BEAT=y
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
CONFIG_PPC_EARLY_DEBUG_BEAT=y
# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:33:50 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:09 2007
#
# CONFIG_PPC64 is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# Kernel options
#
CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_BRIQ_PANEL=m
# CONFIG_HVC_RTAS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 08:01:57 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:11 2007
#
# CONFIG_PPC64 is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6
-# Fri Sep 14 14:59:56 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:13 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
+CONFIG_8XX_MINIMAL_FPEMU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:34:59 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:15 2007
#
CONFIG_PPC64=y
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
#
# Kernel options
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
+CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_SECCOMP=y
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
+# CONFIG_DRM is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:35:41 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:17 2007
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
#
# Platform support
#
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_EMBEDDED6xx=y
+CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
# CONFIG_MPC7448HPC2 is not set
CONFIG_PPC_HOLLY=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="holly.dts"
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_TYPHOON is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:37:16 2007
+# Linux kernel version: 2.6.24-rc3
+# Wed Nov 21 11:19:59 2007
#
CONFIG_PPC64=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
#
# Kernel options
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_PCNET32_NAPI=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_ISERIES=y
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc9
-# Thu Oct 11 19:05:15 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:20 2007
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:38 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:22 2007
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
#
# Platform support
#
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_EMBEDDED6xx=y
+CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
CONFIG_LINKSTATION=y
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_LEN=0x400000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:38 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:24 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_EMBEDDED6xx is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_TAU is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:38:16 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:26 2007
#
CONFIG_PPC64=y
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
#
# Kernel options
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_RTAS=y
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:39 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:28 2007
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
#
# Platform support
#
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_EMBEDDED6xx=y
+CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
CONFIG_MPC7448HPC2=y
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Wed Sep 5 12:43:23 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:30 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_MPC8272_ADS=y
+# CONFIG_PQ2FADS is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_8272=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
-# CONFIG_BUILD_RAW_IMAGE is not set
CONFIG_DEVICE_TREE="mpc8272ads.dts"
CONFIG_ISA_DMA_API=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00400000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_SBC8240 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
#
# Miscellaneous filesystems
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:39 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:31 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_LEN=0x1000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_IOATDMA=y
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:40 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:33 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:27:19 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:35 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# DMA Clients
+# MMC/SD Card Drivers
#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
#
-# DMA Devices
+# MMC/SD Host Controller Drivers
#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=y
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
#
# Userspace I/O
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:41 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:37 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_LEN=0x1000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_USB_EHCI_FSL=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_IOATDMA=y
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:41 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:39 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_LEN=0x800000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
#
# USB Gadget Support
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_IOATDMA=y
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:41 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:41 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
-# DMA Engine support
+# SPI RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
#
-# DMA Clients
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:42 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:43 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:42 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:44 2007
#
# CONFIG_PPC64 is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8544_DS is not set
+# CONFIG_MPC85xx_DS is not set
CONFIG_MPC8540=y
CONFIG_MPC85xx=y
CONFIG_MPIC=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Wed Aug 29 16:41:04 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:46 2007
#
# CONFIG_PPC64 is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Kernel options
#
CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
+# CONFIG_DVB_TUNER_MT2266 is not set
+# CONFIG_DVB_TUNER_MT2131 is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
#
# Miscellaneous devices
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc9
-# Thu Oct 11 09:16:32 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:48 2007
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:43 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:50 2007
#
# CONFIG_PPC64 is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8544_DS is not set
+# CONFIG_MPC85xx_DS is not set
CONFIG_MPC85xx=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
+# CONFIG_UCC_GETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_BOOKE_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 01:19:35 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:52 2007
#
# CONFIG_PPC64 is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Kernel options
#
CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
+# CONFIG_DVB_TUNER_MT2266 is not set
+# CONFIG_DVB_TUNER_MT2131 is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
#
# Miscellaneous devices
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:43 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:54 2007
#
# CONFIG_PPC64 is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8544_DS is not set
+# CONFIG_MPC85xx_DS is not set
CONFIG_MPC8540=y
CONFIG_MPC85xx=y
CONFIG_MPIC=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6
-# Tue Oct 2 11:42:56 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:56 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
# Kernel options
#
CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Wed Aug 29 16:16:23 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:58 2007
#
# CONFIG_PPC64 is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC8641_HPCN=y
+# CONFIG_MPC8610_HPCD is not set
CONFIG_MPC8641=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# Kernel options
#
CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
+# CONFIG_DVB_TUNER_MT2266 is not set
+# CONFIG_DVB_TUNER_MT2131 is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
#
# Miscellaneous devices
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:44 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:48:59 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_MPC8XXFADS is not set
CONFIG_MPC86XADS=y
# CONFIG_MPC885ADS is not set
+# CONFIG_PPC_EP88XC is not set
#
# MPC8xx CPM Options
#
CONFIG_8xx_COPYBACK=y
CONFIG_8xx_CPU6=y
+CONFIG_8xx_CPU15=y
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
#
# Advanced setup
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
CONFIG_FIXED_PHY=y
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
+# CONFIG_FIXED_MII_1000_FDX is not set
+CONFIG_FIXED_MII_AMNT=1
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc3
-# Mon Aug 27 15:23:16 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:01 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
+CONFIG_8XX_MINIMAL_FPEMU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="mpc885ads.dts"
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc2
-# Tue Nov 6 23:23:50 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:03 2007
#
CONFIG_PPC64=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:44:46 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:05 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_APM_EMULATION=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
#
# Old SIR device drivers
# Wireless
#
CONFIG_CFG80211=m
+CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
+CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
-# CONFIG_ATMEL is not set
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+CONFIG_P54_COMMON=m
+# CONFIG_P54_USB is not set
+# CONFIG_P54_PCI is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA is not set
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43_DMA=y
+CONFIG_B43_PIO=y
+CONFIG_B43_DMA_AND_PIO_MODE=y
+# CONFIG_B43_DMA_MODE is not set
+# CONFIG_B43_PIO_MODE is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+# CONFIG_RT2X00 is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_PMACZILOG=m
+CONFIG_SERIAL_PMACZILOG_TTYS=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_PMU=y
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
+CONFIG_DRM=m
+# CONFIG_DRM_TDFX is not set
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc2
-# Tue Nov 6 23:43:56 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:07 2007
#
CONFIG_PPC64=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CPUSETS=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_CGROUP_CPUACCT is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 11:58:17 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:09 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
CONFIG_PQ2FADS=y
-# CONFIG_EP8248E is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_PQ2_ADS_PCI_PIC=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="pq2fads.dts"
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00400000
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_SBC8240 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
#
# Miscellaneous filesystems
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_KGDB_CONSOLE is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:45 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:11 2007
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_CHECK_CACHE_COHERENCY=y
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
#
# Platform support
#
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_EMBEDDED6xx=y
+CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# Kernel options
#
CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="prpmc2800.dts"
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00800000
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_RS5C372 is not set
# on-CPU RTC drivers
#
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 19:17:26 2007
+# Linux kernel version: 2.6.24-rc4
+# Tue Dec 4 22:49:57 2007
#
CONFIG_PPC64=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
+CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
CONFIG_KERNEL_START=0xc000000000000000
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_NET_ETHERNET is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
CONFIG_MII=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
# CONFIG_NETDEV_10000 is not set
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_PS3=y
-CONFIG_FB_PS3_DEFAULT_SIZE_M=18
+CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:50:02 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:15 2007
#
CONFIG_PPC64=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=128
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_FAIR_USER_SCHED is not set
+CONFIG_FAIR_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBMVETH=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
CONFIG_EHEA=m
+# CONFIG_IXGBE is not set
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_HVC_RTAS=y
CONFIG_HVCS=m
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=1024
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
# CONFIG_AUXDISPLAY is not set
#
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_MARKERS=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
+CONFIG_VIRQ_DEBUG=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6
-# Fri Sep 14 13:20:06 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:17 2007
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x01000000
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
CONFIG_PPC_EARLY_DEBUG_44x=y
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 12:54:18 2007
+# Linux kernel version: 2.6.24-rc4
+# Thu Dec 6 16:49:33 2007
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
+ DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size));
+ DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size));
+ DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size));
+ DEFINE(CFG_DCACHE_LOGBLOCKSZ, offsetof(struct vdso_data, dcache_log_block_size));
#ifdef CONFIG_PPC64
DEFINE(CFG_SYSCALL_MAP64, offsetof(struct vdso_data, syscall_map_64));
DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec));
DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START));
#endif
-#ifdef CONFIG_PPC64
DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
-#endif
+
return 0;
}
.globl swapper_pg_dir
swapper_pg_dir:
- .space 4096
+ .space PGD_TABLE_SIZE
.globl intercept_table
intercept_table:
.space 4096
.globl swapper_pg_dir
swapper_pg_dir:
- .space 4096
+ .space PGD_TABLE_SIZE
/* Stack for handling critical exceptions from kernel mode */
*/
.globl swapper_pg_dir
swapper_pg_dir:
- .space 8192
+ .space PGD_TABLE_SIZE
/* Reserved 4k for the critical exception stack & 4k for the machine
* check stack per CPU for kernel mode exceptions */
.space 4096
.globl swapper_pg_dir
swapper_pg_dir:
- .space 4096
+ .space PGD_TABLE_SIZE
/* Reserved 4k for the critical exception stack & 4k for the machine
* check stack per CPU for kernel mode exceptions */
local_irq_save(flags);
account_system_vtime(current);
- account_process_tick(current, 0);
+ account_process_vtime(current);
calculate_steal_time();
last = _switch(old_thread, new_thread);
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+#include <linux/cpumask.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/lmb.h>
#include <asm/udbg.h>
#include <asm/syscalls.h>
+#include <asm/smp.h>
+#include <asm/atomic.h>
struct rtas_t rtas = {
.lock = SPIN_LOCK_UNLOCKED
EXPORT_SYMBOL(rtas);
struct rtas_suspend_me_data {
- long waiting;
- struct rtas_args *args;
+ atomic_t working; /* number of cpus accessing this struct */
+ int token; /* ibm,suspend-me */
+ int error;
+ struct completion *complete; /* wait on this until working == 0 */
};
DEFINE_SPINLOCK(rtas_data_buf_lock);
#ifdef CONFIG_PPC_PSERIES
static void rtas_percpu_suspend_me(void *info)
{
- int i;
long rc;
- long flags;
+ unsigned long msr_save;
+ int cpu;
struct rtas_suspend_me_data *data =
(struct rtas_suspend_me_data *)info;
- /*
- * We use "waiting" to indicate our state. As long
- * as it is >0, we are still trying to all join up.
- * If it goes to 0, we have successfully joined up and
- * one thread got H_CONTINUE. If any error happens,
- * we set it to <0.
- */
- local_irq_save(flags);
- do {
- rc = plpar_hcall_norets(H_JOIN);
- smp_rmb();
- } while (rc == H_SUCCESS && data->waiting > 0);
- if (rc == H_SUCCESS)
- goto out;
+ atomic_inc(&data->working);
+
+ /* really need to ensure MSR.EE is off for H_JOIN */
+ msr_save = mfmsr();
+ mtmsr(msr_save & ~(MSR_EE));
+
+ rc = plpar_hcall_norets(H_JOIN);
+
+ mtmsr(msr_save);
- if (rc == H_CONTINUE) {
- data->waiting = 0;
- data->args->args[data->args->nargs] =
- rtas_call(ibm_suspend_me_token, 0, 1, NULL);
- for_each_possible_cpu(i)
- plpar_hcall_norets(H_PROD,i);
+ if (rc == H_SUCCESS) {
+ /* This cpu was prodded and the suspend is complete. */
+ goto out;
+ } else if (rc == H_CONTINUE) {
+ /* All other cpus are in H_JOIN, this cpu does
+ * the suspend.
+ */
+ printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
+ smp_processor_id());
+ data->error = rtas_call(data->token, 0, 1, NULL);
+
+ if (data->error)
+ printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
+ data->error);
} else {
- data->waiting = -EBUSY;
- printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
+ printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
+ smp_processor_id(), rc);
+ data->error = rc;
}
-
+ /* This cpu did the suspend or got an error; in either case,
+ * we need to prod all other other cpus out of join state.
+ * Extra prods are harmless.
+ */
+ for_each_online_cpu(cpu)
+ plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
out:
- local_irq_restore(flags);
- return;
+ if (atomic_dec_return(&data->working) == 0)
+ complete(data->complete);
}
static int rtas_ibm_suspend_me(struct rtas_args *args)
{
- int i;
long state;
long rc;
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
struct rtas_suspend_me_data data;
+ DECLARE_COMPLETION_ONSTACK(done);
+
+ if (!rtas_service_present("ibm,suspend-me"))
+ return -ENOSYS;
/* Make sure the state is valid */
rc = plpar_hcall(H_VASI_STATE, retbuf,
return 0;
}
- data.waiting = 1;
- data.args = args;
+ atomic_set(&data.working, 0);
+ data.token = rtas_token("ibm,suspend-me");
+ data.error = 0;
+ data.complete = &done;
/* Call function on all CPUs. One of us will make the
* rtas call
*/
if (on_each_cpu(rtas_percpu_suspend_me, &data, 1, 0))
- data.waiting = -EINVAL;
+ data.error = -EINVAL;
- if (data.waiting != 0)
- printk(KERN_ERR "Error doing global join\n");
+ wait_for_completion(&done);
- /* Prod each CPU. This won't hurt, and will wake
- * anyone we successfully put to sleep with H_JOIN.
- */
- for_each_possible_cpu(i)
- plpar_hcall_norets(H_PROD, i);
+ if (data.error != 0)
+ printk(KERN_ERR "Error doing global join\n");
- return data.waiting;
+ return data.error;
}
#else /* CONFIG_PPC_PSERIES */
static int rtas_ibm_suspend_me(struct rtas_args *args)
/* deltascaled includes both user and system time.
* Hence scale it based on the purr ratio to estimate
* the system time */
- deltascaled = deltascaled * get_paca()->system_time /
- (get_paca()->system_time + get_paca()->user_time);
+ if (get_paca()->user_time)
+ deltascaled = deltascaled * get_paca()->system_time /
+ (get_paca()->system_time + get_paca()->user_time);
delta += get_paca()->system_time;
get_paca()->system_time = 0;
}
vdso_data->icache_size = ppc64_caches.isize;
vdso_data->icache_line_size = ppc64_caches.iline_size;
+ /* XXXOJN: Blocks should be added to ppc64_caches and used instead */
+ vdso_data->dcache_block_size = ppc64_caches.dline_size;
+ vdso_data->icache_block_size = ppc64_caches.iline_size;
+ vdso_data->dcache_log_block_size = ppc64_caches.log_dline_size;
+ vdso_data->icache_log_block_size = ppc64_caches.log_iline_size;
+
/*
* Calculate the size of the 64 bits vDSO
*/
vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT;
DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages);
+#else
+ vdso_data->dcache_block_size = L1_CACHE_BYTES;
+ vdso_data->dcache_log_block_size = L1_CACHE_SHIFT;
+ vdso_data->icache_block_size = L1_CACHE_BYTES;
+ vdso_data->icache_log_block_size = L1_CACHE_SHIFT;
#endif /* CONFIG_PPC64 */
*
* Flushes the data cache & invalidate the instruction cache for the
* provided range [start, end[
- *
- * Note: all CPUs supported by this kernel have a 128 bytes cache
- * line size so we don't have to peek that info from the datapage
*/
V_FUNCTION_BEGIN(__kernel_sync_dicache)
.cfi_startproc
- li r5,127
- andc r6,r3,r5 /* round low to line bdy */
+ mflr r12
+ .cfi_register lr,r12
+ mr r11,r3
+ bl __get_datapage@local
+ mtlr r12
+ mr r10,r3
+
+ lwz r7,CFG_DCACHE_BLOCKSZ(r10)
+ addi r5,r7,-1
+ andc r6,r11,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
- srwi. r8,r8,7 /* compute line count */
+ lwz r9,CFG_DCACHE_LOGBLOCKSZ(r10)
+ srw. r8,r8,r9 /* compute line count */
crclr cr0*4+so
beqlr /* nothing to do? */
mtctr r8
- mr r3,r6
-1: dcbst 0,r3
- addi r3,r3,128
+1: dcbst 0,r6
+ add r6,r6,r7
bdnz 1b
sync
+
+/* Now invalidate the instruction cache */
+
+ lwz r7,CFG_ICACHE_BLOCKSZ(r10)
+ addi r5,r7,-1
+ andc r6,r11,r5 /* round low to line bdy */
+ subf r8,r6,r4 /* compute length */
+ add r8,r8,r5
+ lwz r9,CFG_ICACHE_LOGBLOCKSZ(r10)
+ srw. r8,r8,r9 /* compute line count */
+ crclr cr0*4+so
+ beqlr /* nothing to do? */
mtctr r8
-1: icbi 0,r6
- addi r6,r6,128
- bdnz 1b
+2: icbi 0,r6
+ add r6,r6,r7
+ bdnz 2b
isync
li r3,0
blr
*
* Flushes the data cache & invalidate the instruction cache for the
* provided range [start, end[
- *
- * Note: all CPUs supported by this kernel have a 128 bytes cache
- * line size so we don't have to peek that info from the datapage
*/
V_FUNCTION_BEGIN(__kernel_sync_dicache)
.cfi_startproc
- li r5,127
- andc r6,r3,r5 /* round low to line bdy */
+ mflr r12
+ .cfi_register lr,r12
+ mr r11,r3
+ bl V_LOCAL_FUNC(__get_datapage)
+ mtlr r12
+ mr r10,r3
+
+ lwz r7,CFG_DCACHE_BLOCKSZ(r10)
+ addi r5,r7,-1
+ andc r6,r11,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
- srwi. r8,r8,7 /* compute line count */
+ lwz r9,CFG_DCACHE_LOGBLOCKSZ(r10)
+ srw. r8,r8,r9 /* compute line count */
crclr cr0*4+so
beqlr /* nothing to do? */
mtctr r8
- mr r3,r6
-1: dcbst 0,r3
- addi r3,r3,128
+1: dcbst 0,r6
+ add r6,r6,r7
bdnz 1b
sync
+
+/* Now invalidate the instruction cache */
+
+ lwz r7,CFG_ICACHE_BLOCKSZ(r10)
+ addi r5,r7,-1
+ andc r6,r11,r5 /* round low to line bdy */
+ subf r8,r6,r4 /* compute length */
+ add r8,r8,r5
+ lwz r9,CFG_ICACHE_LOGBLOCKSZ(r10)
+ srw. r8,r8,r9 /* compute line count */
+ crclr cr0*4+so
+ beqlr /* nothing to do? */
mtctr r8
-1: icbi 0,r6
- addi r6,r6,128
- bdnz 1b
+2: icbi 0,r6
+ add r6,r6,r7
+ bdnz 2b
isync
li r3,0
blr
* we invalidate the TLB here, thus avoiding dcbst
* misbehaviour.
*/
- _tlbie(address);
+ _tlbie(address, 0 /* 8xx doesn't care about PID */);
#endif
if (!PageReserved(page)
&& !test_bit(PG_arch_1, &page->flags)) {
* architectures. -- Dan
*/
#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(X, va, pg) _tlbie(va, 0 /* 8xx doesn't care about PID */)
#define MMU_init_hw() do { } while(0)
#define mmu_mapin_ram() (0UL)
#include <asm/lmb.h>
#include <asm/abs_addr.h>
#include <asm/firmware.h>
+#include <asm/iseries/hv_call.h>
struct stab_entry {
unsigned long esid_data;
*/
#include <linux/init.h>
+#include <linux/of_platform.h>
+
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-#include <asm/of_platform.h>
static struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
* option) any later version.
*/
#include <linux/init.h>
+#include <linux/of_platform.h>
+
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-#include <asm/of_platform.h>
#include "44x.h"
static struct of_device_id bamboo_of_bus[] = {
*/
#include <linux/init.h>
+#include <linux/of_platform.h>
+
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-#include <asm/of_platform.h>
#include "44x.h"
* option) any later version.
*/
#include <linux/init.h>
+#include <linux/of_platform.h>
+
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-#include <asm/of_platform.h>
#include "44x.h"
static struct of_device_id sequoia_of_bus[] = {
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
- /* Reset the Ethernet PHY */
- bcsr_regs[9] &= ~0x20;
+ /* Reset the Ethernet PHYs */
+#define BCSR8_FETH_RST 0x50
+ bcsr_regs[8] &= ~BCSR8_FETH_RST;
udelay(1000);
- bcsr_regs[9] |= 0x20;
+ bcsr_regs[8] |= BCSR8_FETH_RST;
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
}
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc832x_rtc_hookup(void)
-{
- struct timespec tv;
-
- if (!machine_is(mpc832x_mds))
- return 0;
-
- ppc_md.get_rtc_time = ds1374_get_rtc_time;
- ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time) ();
- do_settimeofday(&tv);
-
- return 0;
-}
-
-late_initcall(mpc832x_rtc_hookup);
-#endif
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
*/
#include <linux/pci.h>
+#include <linux/interrupt.h>
#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
#include <asm/of_platform.h>
#include <asm/time.h>
par_io_data_set(3, 13, !polarity);
}
+static struct mmc_spi_platform_data mpc832x_mmc_pdata = {
+ .ocr_mask = MMC_VDD_33_34,
+};
+
static struct spi_board_info mpc832x_spi_boardinfo = {
.bus_num = 0x4c0,
.chip_select = 0,
.max_speed_hz = 50000000,
- /*
- * XXX: This is spidev (spi in userspace) stub, should
- * be replaced by "mmc_spi" when mmc_spi will hit mainline.
- */
- .modalias = "spidev",
+ .modalias = "mmc_spi",
+ .platform_data = &mpc832x_mmc_pdata,
};
static int __init mpc832x_spi_init(void)
ipic_set_default_priority();
}
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc834x_rtc_hookup(void)
-{
- struct timespec tv;
-
- if (!machine_is(mpc834x_mds))
- return 0;
-
- ppc_md.get_rtc_time = ds1374_get_rtc_time;
- ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time) ();
- do_settimeofday(&tv);
-
- return 0;
-}
-
-late_initcall(mpc834x_rtc_hookup);
-#endif
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
+ uint svid;
+
/* Reset the Ethernet PHY */
- bcsr_regs[9] &= ~0x20;
+#define BCSR9_GETHRST 0x20
+ clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
udelay(1000);
- bcsr_regs[9] |= 0x20;
+ setbits8(&bcsr_regs[9], BCSR9_GETHRST);
+
+ /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
+ svid = mfspr(SPRN_SVR);
+ if (svid == 0x80480021) {
+ void __iomem *immap;
+
+ immap = ioremap(get_immrbase() + 0x14a8, 8);
+
+ /*
+ * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+ * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+ */
+ setbits32(immap, 0x0c003000);
+
+ /*
+ * IMMR + 0x14AC[20:27] = 10101010
+ * (data delay for both UCC's)
+ */
+ clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+
+ iounmap(immap);
+ }
+
iounmap(bcsr_regs);
of_node_put(np);
}
-
#endif /* CONFIG_QUICC_ENGINE */
}
#endif /* CONFIG_QUICC_ENGINE */
}
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc8360_rtc_hookup(void)
-{
- struct timespec tv;
-
- if (!machine_is(mpc836x_mds))
- return 0;
-
- ppc_md.get_rtc_time = ds1374_get_rtc_time;
- ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time) ();
- do_settimeofday(&tv);
-
- return 0;
-}
-
-late_initcall(mpc8360_rtc_hookup);
-#endif
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
out_be32(immap + MPC83XX_SCCR_OFFS, temp);
/* Configure pin mux for ULPI. There is no pin mux for UTMI */
- if (!strcmp(prop, "ulpi")) {
+ if (prop && !strcmp(prop, "ulpi")) {
temp = in_be32(immap + MPC83XX_SICRL_OFFS);
temp &= ~MPC831X_SICRL_USB_MASK;
temp |= MPC831X_SICRL_USB_ULPI;
usb_regs = ioremap(res.start, res.end - res.start + 1);
/* Using on-chip PHY */
- if (!strcmp(prop, "utmi_wide") ||
- !strcmp(prop, "utmi")) {
+ if (prop && (!strcmp(prop, "utmi_wide") ||
+ !strcmp(prop, "utmi"))) {
/* Set UTMI_PHY_EN, REFSEL to 48MHZ */
out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
/* Using external UPLI PHY */
- } else if (!strcmp(prop, "ulpi")) {
+ } else if (prop && !strcmp(prop, "ulpi")) {
/* Set PHY_CLK_SEL to ULPI */
temp = CONTROL_PHY_CLK_SEL_ULPI;
#ifdef CONFIG_USB_OTG
{
/* remove all entries */
spufs_prune_dir(dir);
+ d_drop(dir);
return simple_rmdir(parent, dir);
}
/* SL82C105 IDE Control/Status Register */
#define SL82C105_IDECSR 0x40
-/* Fixup for Winbond ATA quirk, required for briq */
-void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
+/* Fixup for Winbond ATA quirk, required for briq mostly because the
+ * 8259 is configured for level sensitive IRQ 14 and so wants the
+ * ATA controller to be set to fully native mode or bad things
+ * will happen.
+ */
+static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
{
u8 progif;
sl82c105->class |= 0x05;
/* Disable SL82C105 second port */
pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
+ /* Clear IO BARs, they will be reassigned */
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
- chrp_pci_fixup_winbond_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
+ chrp_pci_fixup_winbond_ata);
/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
* in legacy mode, but sets the PCI registers to PCI native mode.
* mode as well. The same fixup must be done to the class-code property in
* the IDE node /pci@80000000/ide@C,1
*/
-static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
+static void __devinit chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
{
u8 progif;
struct pci_dev *viaisa;
pci_dev_put(viaisa);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
strncpy(prpmc2800_platform_name, m,
min((int)len, PLATFORM_NAME_MAX - 1));
+ _set_L2CR(_get_L2CR() | L2CR_L2E);
return 1;
}
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
mpic = mpic_alloc(mpic_node, openpic_addr,
- MPIC_PRIMARY|MPIC_LARGE_VECTORS|MPIC_WANTS_RESET,
+ MPIC_PRIMARY|MPIC_LARGE_VECTORS,
0, 0, " PAS-OPIC ");
BUG_ON(!mpic);
good:
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 5) != 5) {
- printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n",
+ printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n",
pci_name(dev));
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5)
printk(KERN_ERR "Rewrite of PROGIF failed !\n");
+ else {
+ /* Clear IO BARs, they will be reassigned */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_3, 0);
+ }
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
#endif
/*
config EEH
bool "PCI Extended Error Handling (EEH)" if EMBEDDED
- depends on PPC_PSERIES
+ depends on PPC_PSERIES && PCI
default y if !EMBEDDED
config SCANLOG
spin_unlock_irqrestore(&uic->lock, flags);
}
+static void uic_mask_ack_irq(unsigned int virq)
+{
+ struct uic *uic = get_irq_chip_data(virq);
+ unsigned int src = uic_irq_to_hw(virq);
+ unsigned long flags;
+ u32 er, sr;
+
+ sr = 1 << (31-src);
+ spin_lock_irqsave(&uic->lock, flags);
+ er = mfdcr(uic->dcrbase + UIC_ER);
+ er &= ~sr;
+ mtdcr(uic->dcrbase + UIC_ER, er);
+ mtdcr(uic->dcrbase + UIC_SR, sr);
+ spin_unlock_irqrestore(&uic->lock, flags);
+}
+
static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
{
struct uic *uic = get_irq_chip_data(virq);
.typename = " UIC ",
.unmask = uic_unmask_irq,
.mask = uic_mask_irq,
-/* .mask_ack = uic_mask_irq_and_ack, */
+ .mask_ack = uic_mask_ack_irq,
.ack = uic_ack_irq,
.set_type = uic_set_irq_type,
};
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KGDB is not set
-CONFIG_XMON=y
+# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KGDB is not set
-CONFIG_XMON=y
+# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
+#if defined(CONFIG_440EP) && defined(CONFIG_PPC_FPU)
+ /* We pass the virtual PVR here for 440EP as 440EP and 440GR have
+ * identical PVRs and there is no reliable way to check for the FPU
+ */
+ spec = identify_cpu(offset, (mfspr(SPRN_PVR) | 0x8));
+#else
spec = identify_cpu(offset, mfspr(SPRN_PVR));
+#endif
do_feature_fixups(spec->cpu_features,
PTRRELOC(&__start___ftr_fixup),
PTRRELOC(&__stop___ftr_fixup));
* That means the zeroed TLB has to be invalidated
* whenever a page miss occurs.
*/
- _tlbie(address);
+ _tlbie(address, 0 /* 8xx doesn't care about PID */);
#endif
if (!PageReserved(page)
&& !test_bit(PG_arch_1, &page->flags)) {
* architectures. -- Dan
*/
#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(X, va, pg) _tlbie(va, 0 /* 8xx doesn't care about PID */)
#define MMU_init_hw() do { } while(0)
#define mmu_mapin_ram() (0UL)
#if defined(CONFIG_XILINX_ML300)
#include "xparameters_ml300.h"
+ #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
+ XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
+ #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
+ XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
#elif defined(CONFIG_XILINX_ML403)
#include "xparameters_ml403.h"
+ #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
+ XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
+ #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
+ XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
#else
/* Add other board xparameter includes here before the #else */
#error No xparameters_*.h file included
break;
default:
+ iounmap(pcie_reg_fpga_base);
return;
}
}, \
}
+#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
+ .name = "ml403_ac97cr", \
+ .id = num, \
+ .num_resources = 3, \
+ .resource = (struct resource[]) { \
+ { \
+ .start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \
+ .end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
+ .end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ { \
+ .start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
+ .end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }, \
+}
+
/* UART 8250 driver platform data table */
struct plat_serial8250_port virtex_serial_platform_data[] = {
#if defined(XPAR_UARTNS550_0_BASEADDR)
#if defined(XPAR_TFT_3_BASEADDR)
XPAR_TFT(3),
#endif
+
+ /* AC97 Controller Reference instances */
+#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
+ XPAR_AC97_CONTROLLER_REFERENCE(0),
+#endif
+#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR)
+ XPAR_AC97_CONTROLLER_REFERENCE(1),
+#endif
};
/* Early serial support functions */
int active; /* monitoring status */
/* fill in from here */
- unsigned int ctl_nr; /* sysctl ID */
char name[APPLDATA_PROC_NAME_LENGTH]; /* name of /proc fs node */
unsigned char record_nr; /* Record Nr. for Product ID */
void (*callback)(void *data); /* callback function */
static struct ctl_table_header *appldata_sysctl_header;
static struct ctl_table appldata_table[] = {
{
- .ctl_name = CTL_APPLDATA_TIMER,
.procname = "timer",
.mode = S_IRUGO | S_IWUSR,
.proc_handler = &appldata_timer_handler,
},
{
- .ctl_name = CTL_APPLDATA_INTERVAL,
.procname = "interval",
.mode = S_IRUGO | S_IWUSR,
.proc_handler = &appldata_interval_handler,
},
- { .ctl_name = 0 }
+ { },
};
static struct ctl_table appldata_dir_table[] = {
{
- .ctl_name = CTL_APPLDATA,
.procname = appldata_proc_name,
.maxlen = 0,
.mode = S_IRUGO | S_IXUGO,
.child = appldata_table,
},
- { .ctl_name = 0 }
+ { },
};
/*
*/
int appldata_register_ops(struct appldata_ops *ops)
{
- struct list_head *lh;
- struct appldata_ops *tmp_ops;
- int i;
-
- i = 0;
+ if ((ops->size > APPLDATA_MAX_REC_SIZE) || (ops->size < 0))
+ return -EINVAL;
- if ((ops->size > APPLDATA_MAX_REC_SIZE) ||
- (ops->size < 0)){
- P_ERROR("Invalid size of %s record = %i, maximum = %i!\n",
- ops->name, ops->size, APPLDATA_MAX_REC_SIZE);
- return -ENOMEM;
- }
- if ((ops->ctl_nr == CTL_APPLDATA) ||
- (ops->ctl_nr == CTL_APPLDATA_TIMER) ||
- (ops->ctl_nr == CTL_APPLDATA_INTERVAL)) {
- P_ERROR("ctl_nr %i already in use!\n", ops->ctl_nr);
- return -EBUSY;
- }
- ops->ctl_table = kzalloc(4*sizeof(struct ctl_table), GFP_KERNEL);
- if (ops->ctl_table == NULL) {
- P_ERROR("Not enough memory for %s ctl_table!\n", ops->name);
+ ops->ctl_table = kzalloc(4 * sizeof(struct ctl_table), GFP_KERNEL);
+ if (!ops->ctl_table)
return -ENOMEM;
- }
spin_lock(&appldata_ops_lock);
- list_for_each(lh, &appldata_ops_list) {
- tmp_ops = list_entry(lh, struct appldata_ops, list);
- P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n",
- ++i, tmp_ops->name, tmp_ops->ctl_nr);
- P_DEBUG("Comparing %s (ctl %i) with %s (ctl %i)\n",
- tmp_ops->name, tmp_ops->ctl_nr, ops->name,
- ops->ctl_nr);
- if (strncmp(tmp_ops->name, ops->name,
- APPLDATA_PROC_NAME_LENGTH) == 0) {
- P_ERROR("Name \"%s\" already registered!\n", ops->name);
- kfree(ops->ctl_table);
- spin_unlock(&appldata_ops_lock);
- return -EBUSY;
- }
- if (tmp_ops->ctl_nr == ops->ctl_nr) {
- P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr);
- kfree(ops->ctl_table);
- spin_unlock(&appldata_ops_lock);
- return -EBUSY;
- }
- }
list_add(&ops->list, &appldata_ops_list);
spin_unlock(&appldata_ops_lock);
- ops->ctl_table[0].ctl_name = CTL_APPLDATA;
ops->ctl_table[0].procname = appldata_proc_name;
ops->ctl_table[0].maxlen = 0;
ops->ctl_table[0].mode = S_IRUGO | S_IXUGO;
ops->ctl_table[0].child = &ops->ctl_table[2];
- ops->ctl_table[1].ctl_name = 0;
-
- ops->ctl_table[2].ctl_name = ops->ctl_nr;
ops->ctl_table[2].procname = ops->name;
ops->ctl_table[2].mode = S_IRUGO | S_IWUSR;
ops->ctl_table[2].proc_handler = appldata_generic_handler;
ops->ctl_table[2].data = ops;
- ops->ctl_table[3].ctl_name = 0;
-
ops->sysctl_header = register_sysctl_table(ops->ctl_table);
-
+ if (!ops->sysctl_header)
+ goto out;
P_INFO("%s-ops registered!\n", ops->name);
return 0;
+out:
+ spin_lock(&appldata_ops_lock);
+ list_del(&ops->list);
+ spin_unlock(&appldata_ops_lock);
+ kfree(ops->ctl_table);
+ return -ENOMEM;
}
/*
*/
void appldata_unregister_ops(struct appldata_ops *ops)
{
- void *table;
spin_lock(&appldata_ops_lock);
list_del(&ops->list);
- /* at that point any incoming access will fail */
- table = ops->ctl_table;
- ops->ctl_table = NULL;
spin_unlock(&appldata_ops_lock);
unregister_sysctl_table(ops->sysctl_header);
- kfree(table);
+ kfree(ops->ctl_table);
P_INFO("%s-ops unregistered!\n", ops->name);
}
/********************** module-ops management <END> **************************/
static struct appldata_ops ops = {
- .ctl_nr = CTL_APPLDATA_MEM,
.name = "mem",
.record_nr = APPLDATA_RECORD_MEM_ID,
.size = sizeof(struct appldata_mem_data),
static struct appldata_ops ops = {
- .ctl_nr = CTL_APPLDATA_NET_SUM,
.name = "net_sum",
.record_nr = APPLDATA_RECORD_NET_SUM_ID,
.size = sizeof(struct appldata_net_sum_data),
static struct appldata_os_data *appldata_os_data;
static struct appldata_ops ops = {
- .ctl_nr = CTL_APPLDATA_OS,
.name = "os",
.record_nr = APPLDATA_RECORD_OS_ID,
.owner = THIS_MODULE,
cc = __tprot(addr);
while (cc == old_cc) {
addr += CHUNK_INCR;
- if (addr >= memsize)
+ if (memsize && addr >= memsize)
break;
#ifndef CONFIG_64BIT
if (addr == ADDR2G)
basr %r14,%r1
.endm
- .macro LOCKDEP_SYS_EXIT
- l %r1,BASED(.Llockdep_sys_exit)
+ .macro TRACE_IRQS_CHECK
+ tm SP_PSW(%r15),0x03 # irqs enabled?
+ jz 0f
+ l %r1,BASED(.Ltrace_irq_on)
basr %r14,%r1
+ j 1f
+0: l %r1,BASED(.Ltrace_irq_off)
+ basr %r14,%r1
+1:
.endm
#else
#define TRACE_IRQS_ON
#define TRACE_IRQS_OFF
+#define TRACE_IRQS_CHECK
+#endif
+
+#ifdef CONFIG_LOCKDEP
+ .macro LOCKDEP_SYS_EXIT
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+ jz 0f
+ l %r1,BASED(.Llockdep_sys_exit)
+ basr %r14,%r1
+0:
+ .endm
+#else
#define LOCKDEP_SYS_EXIT
#endif
lh %r7,0x8a # get svc number from lowcore
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
sysc_vtime:
- tm SP_PSW+1(%r15),0x01 # interrupting from user ?
- bz BASED(sysc_do_svc)
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
sysc_stime:
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
sysc_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
- bno BASED(sysc_leave)
+ bno BASED(sysc_restore)
tm __TI_flags+3(%r9),_TIF_WORK_SVC
bnz BASED(sysc_work) # there is work to do (signals etc.)
+sysc_restore:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ la %r1,BASED(sysc_restore_trace_psw)
+ lpsw 0(%r1)
+sysc_restore_trace:
+ TRACE_IRQS_CHECK
LOCKDEP_SYS_EXIT
+#endif
sysc_leave:
RESTORE_ALL __LC_RETURN_PSW,1
+sysc_done:
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ .align 8
+ .globl sysc_restore_trace_psw
+sysc_restore_trace_psw:
+ .long 0, sysc_restore_trace + 0x80000000
+#endif
#
# recheck if there is more work to do
#
sysc_work_loop:
tm __TI_flags+3(%r9),_TIF_WORK_SVC
- bz BASED(sysc_leave) # there is no work to do
+ bz BASED(sysc_restore) # there is no work to do
#
# One of the work bits is on. Find out which one.
#
bo BASED(sysc_restart)
tm __TI_flags+3(%r9),_TIF_SINGLE_STEP
bo BASED(sysc_singlestep)
- LOCKDEP_SYS_EXIT
- b BASED(sysc_leave)
+ b BASED(sysc_restore)
+sysc_work_done:
#
# _TIF_NEED_RESCHED is set, call schedule
pgm_no_vtime:
#endif
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
+ TRACE_IRQS_OFF
l %r3,__LC_PGM_ILC # load program interruption code
la %r8,0x7f
nr %r8,%r3
pgm_no_vtime2:
#endif
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
+ TRACE_IRQS_OFF
l %r1,__TI_task(%r9)
mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- tm SP_PSW+1(%r15),0x01 # interrupting from user ?
- bz BASED(pgm_no_vtime3)
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-pgm_no_vtime3:
#endif
lh %r7,0x8a # get svc number from lowcore
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
+ TRACE_IRQS_OFF
l %r1,__TI_task(%r9)
mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
- la %r14,BASED(sysc_leave) # load adr. of system return
+ la %r14,BASED(sysc_restore)# load adr. of system return
br %r1 # branch to do_single_step
/*
l %r1,BASED(.Ldo_IRQ) # load address of do_IRQ
la %r2,SP_PTREGS(%r15) # address of register-save area
basr %r14,%r1 # branch to standard irq handler
- TRACE_IRQS_ON
-
io_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
#ifdef CONFIG_PREEMPT
bno BASED(io_preempt) # no -> check for preemptive scheduling
#else
- bno BASED(io_leave) # no-> skip resched & signal
+ bno BASED(io_restore) # no-> skip resched & signal
#endif
tm __TI_flags+3(%r9),_TIF_WORK_INT
bnz BASED(io_work) # there is work to do (signals etc.)
+io_restore:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ la %r1,BASED(io_restore_trace_psw)
+ lpsw 0(%r1)
+io_restore_trace:
+ TRACE_IRQS_CHECK
LOCKDEP_SYS_EXIT
+#endif
io_leave:
RESTORE_ALL __LC_RETURN_PSW,0
io_done:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ .align 8
+ .globl io_restore_trace_psw
+io_restore_trace_psw:
+ .long 0, io_restore_trace + 0x80000000
+#endif
+
#ifdef CONFIG_PREEMPT
io_preempt:
icm %r0,15,__TI_precount(%r9)
- bnz BASED(io_leave)
+ bnz BASED(io_restore)
l %r1,SP_R15(%r15)
s %r1,BASED(.Lc_spsize)
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
lr %r15,%r1
io_resume_loop:
tm __TI_flags+3(%r9),_TIF_NEED_RESCHED
- bno BASED(io_leave)
- mvc __TI_precount(4,%r9),BASED(.Lc_pactive)
- stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
- l %r1,BASED(.Lschedule)
- basr %r14,%r1 # call schedule
- stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
- xc __TI_precount(4,%r9),__TI_precount(%r9)
- b BASED(io_resume_loop)
+ bno BASED(io_restore)
+ l %r1,BASED(.Lpreempt_schedule_irq)
+ la %r14,BASED(io_resume_loop)
+ br %r1 # call schedule
#endif
#
bo BASED(io_reschedule)
tm __TI_flags+3(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
bnz BASED(io_sigpending)
- LOCKDEP_SYS_EXIT
- b BASED(io_leave)
+ b BASED(io_restore)
+io_work_done:
#
# _TIF_MCCK_PENDING is set, call handler
#
io_mcck_pending:
- TRACE_IRQS_OFF
l %r1,BASED(.Ls390_handle_mcck)
basr %r14,%r1 # TIF bit will be cleared by handler
- TRACE_IRQS_ON
b BASED(io_work_loop)
#
# _TIF_NEED_RESCHED is set, call schedule
#
io_reschedule:
+ TRACE_IRQS_ON
l %r1,BASED(.Lschedule)
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
basr %r14,%r1 # call scheduler
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
+ TRACE_IRQS_OFF
tm __TI_flags+3(%r9),_TIF_WORK_INT
- bz BASED(io_leave) # there is no work to do
+ bz BASED(io_restore) # there is no work to do
b BASED(io_work_loop)
#
# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
io_sigpending:
+ TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
la %r2,SP_PTREGS(%r15) # load pt_regs
l %r1,BASED(.Ldo_signal)
basr %r14,%r1 # call do_signal
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
+ TRACE_IRQS_OFF
b BASED(io_work_loop)
/*
lh %r3,__LC_EXT_INT_CODE # get interruption code
l %r1,BASED(.Ldo_extint)
basr %r14,%r1
- TRACE_IRQS_ON
b BASED(io_return)
__critical_end:
cleanup_table_sysc_return:
.long sysc_return + 0x80000000, sysc_leave + 0x80000000
cleanup_table_sysc_leave:
- .long sysc_leave + 0x80000000, sysc_work_loop + 0x80000000
+ .long sysc_leave + 0x80000000, sysc_done + 0x80000000
cleanup_table_sysc_work_loop:
- .long sysc_work_loop + 0x80000000, sysc_reschedule + 0x80000000
+ .long sysc_work_loop + 0x80000000, sysc_work_done + 0x80000000
cleanup_table_io_return:
.long io_return + 0x80000000, io_leave + 0x80000000
cleanup_table_io_leave:
.long io_leave + 0x80000000, io_done + 0x80000000
cleanup_table_io_work_loop:
- .long io_work_loop + 0x80000000, io_mcck_pending + 0x80000000
+ .long io_work_loop + 0x80000000, io_work_done + 0x80000000
cleanup_critical:
clc 4(4,%r12),BASED(cleanup_table_system_call)
cleanup_vtime:
clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+12)
bhe BASED(cleanup_stime)
- tm SP_PSW+1(%r15),0x01 # interrupting from user ?
- bz BASED(cleanup_novtime)
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
cleanup_stime:
clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+16)
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
cleanup_update:
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-cleanup_novtime:
#endif
mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_system_call+4)
la %r12,__LC_RETURN_PSW
2: la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave_insn:
+ .long sysc_done - 4 + 0x80000000
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- .long sysc_leave + 14 + 0x80000000
+ .long sysc_done - 8 + 0x80000000
#endif
- .long sysc_leave + 10 + 0x80000000
cleanup_io_return:
mvc __LC_RETURN_PSW(4),0(%r12)
2: la %r12,__LC_RETURN_PSW
br %r14
cleanup_io_leave_insn:
+ .long io_done - 4 + 0x80000000
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- .long io_leave + 18 + 0x80000000
+ .long io_done - 8 + 0x80000000
#endif
- .long io_leave + 14 + 0x80000000
/*
* Integer constants
.align 4
.Lc_spsize: .long SP_SIZE
.Lc_overhead: .long STACK_FRAME_OVERHEAD
-.Lc_pactive: .long PREEMPT_ACTIVE
.Lnr_syscalls: .long NR_syscalls
.L0x018: .short 0x018
.L0x020: .short 0x020
.Lexecve_tail: .long execve_tail
.Ljump_table: .long pgm_check_table
.Lschedule: .long schedule
+#ifdef CONFIG_PREEMPT
+.Lpreempt_schedule_irq:
+ .long preempt_schedule_irq
+#endif
.Ltrace: .long syscall_trace
.Lschedtail: .long schedule_tail
.Lsysc_table: .long sys_call_table
brasl %r14,trace_hardirqs_off
.endm
- .macro LOCKDEP_SYS_EXIT
- brasl %r14,lockdep_sys_exit
+ .macro TRACE_IRQS_CHECK
+ tm SP_PSW(%r15),0x03 # irqs enabled?
+ jz 0f
+ brasl %r14,trace_hardirqs_on
+ j 1f
+0: brasl %r14,trace_hardirqs_off
+1:
.endm
#else
#define TRACE_IRQS_ON
#define TRACE_IRQS_OFF
+#define TRACE_IRQS_CHECK
+#endif
+
+#ifdef CONFIG_LOCKDEP
+ .macro LOCKDEP_SYS_EXIT
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+ jz 0f
+ brasl %r14,lockdep_sys_exit
+0:
+ .endm
+#else
#define LOCKDEP_SYS_EXIT
#endif
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
sysc_vtime:
- tm SP_PSW+1(%r15),0x01 # interrupting from user ?
- jz sysc_do_svc
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
sysc_stime:
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
sysc_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
- jno sysc_leave
+ jno sysc_restore
tm __TI_flags+7(%r9),_TIF_WORK_SVC
jnz sysc_work # there is work to do (signals etc.)
+sysc_restore:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ larl %r1,sysc_restore_trace_psw
+ lpswe 0(%r1)
+sysc_restore_trace:
+ TRACE_IRQS_CHECK
LOCKDEP_SYS_EXIT
+#endif
sysc_leave:
RESTORE_ALL __LC_RETURN_PSW,1
+sysc_done:
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ .align 8
+ .globl sysc_restore_trace_psw
+sysc_restore_trace_psw:
+ .quad 0, sysc_restore_trace
+#endif
#
# recheck if there is more work to do
#
sysc_work_loop:
tm __TI_flags+7(%r9),_TIF_WORK_SVC
- jz sysc_leave # there is no work to do
+ jz sysc_restore # there is no work to do
#
# One of the work bits is on. Find out which one.
#
jo sysc_restart
tm __TI_flags+7(%r9),_TIF_SINGLE_STEP
jo sysc_singlestep
- LOCKDEP_SYS_EXIT
- j sysc_leave
+ j sysc_restore
+sysc_work_done:
#
# _TIF_NEED_RESCHED is set, call schedule
pgm_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
+ TRACE_IRQS_OFF
lgf %r3,__LC_PGM_ILC # load program interruption code
lghi %r8,0x7f
ngr %r8,%r3
pgm_no_vtime2:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
+ TRACE_IRQS_OFF
lg %r1,__TI_task(%r9)
tm SP_PSW+1(%r15),0x01 # kernel per event ?
jz kernel_per
SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- tm SP_PSW+1(%r15),0x01 # interrupting from user ?
- jz pgm_no_vtime3
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-pgm_no_vtime3:
#endif
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lhi %r0,__LC_PGM_OLD_PSW
sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
la %r2,SP_PTREGS(%r15) # address of register-save area
- larl %r14,sysc_leave # load adr. of system ret, no work
+ larl %r14,sysc_restore # load adr. of system ret, no work
jg do_single_step # branch to do_single_step
/*
TRACE_IRQS_OFF
la %r2,SP_PTREGS(%r15) # address of register-save area
brasl %r14,do_IRQ # call standard irq handler
- TRACE_IRQS_ON
-
io_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
#ifdef CONFIG_PREEMPT
jno io_preempt # no -> check for preemptive scheduling
#else
- jno io_leave # no-> skip resched & signal
+ jno io_restore # no-> skip resched & signal
#endif
tm __TI_flags+7(%r9),_TIF_WORK_INT
jnz io_work # there is work to do (signals etc.)
+io_restore:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ larl %r1,io_restore_trace_psw
+ lpswe 0(%r1)
+io_restore_trace:
+ TRACE_IRQS_CHECK
LOCKDEP_SYS_EXIT
+#endif
io_leave:
RESTORE_ALL __LC_RETURN_PSW,0
io_done:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ .align 8
+ .globl io_restore_trace_psw
+io_restore_trace_psw:
+ .quad 0, io_restore_trace
+#endif
+
#ifdef CONFIG_PREEMPT
io_preempt:
icm %r0,15,__TI_precount(%r9)
- jnz io_leave
+ jnz io_restore
# switch to kernel stack
lg %r1,SP_R15(%r15)
aghi %r1,-SP_SIZE
lgr %r15,%r1
io_resume_loop:
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
- jno io_leave
- larl %r1,.Lc_pactive
- mvc __TI_precount(4,%r9),0(%r1)
- stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
- brasl %r14,schedule # call schedule
- stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
- xc __TI_precount(4,%r9),__TI_precount(%r9)
- j io_resume_loop
+ jno io_restore
+ larl %r14,io_resume_loop
+ jg preempt_schedule_irq
#endif
#
jo io_reschedule
tm __TI_flags+7(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
jnz io_sigpending
- LOCKDEP_SYS_EXIT
- j io_leave
+ j io_restore
+io_work_done:
#
# _TIF_MCCK_PENDING is set, call handler
#
io_mcck_pending:
- TRACE_IRQS_OFF
brasl %r14,s390_handle_mcck # TIF bit will be cleared by handler
- TRACE_IRQS_ON
j io_work_loop
#
# _TIF_NEED_RESCHED is set, call schedule
#
io_reschedule:
+ TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
brasl %r14,schedule # call scheduler
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
+ TRACE_IRQS_OFF
tm __TI_flags+7(%r9),_TIF_WORK_INT
- jz io_leave # there is no work to do
+ jz io_restore # there is no work to do
j io_work_loop
#
# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
io_sigpending:
+ TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
la %r2,SP_PTREGS(%r15) # load pt_regs
brasl %r14,do_signal # call do_signal
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
+ TRACE_IRQS_OFF
j io_work_loop
/*
la %r2,SP_PTREGS(%r15) # address of register-save area
llgh %r3,__LC_EXT_INT_CODE # get interruption code
brasl %r14,do_extint
- TRACE_IRQS_ON
j io_return
__critical_end:
cleanup_table_sysc_return:
.quad sysc_return, sysc_leave
cleanup_table_sysc_leave:
- .quad sysc_leave, sysc_work_loop
+ .quad sysc_leave, sysc_done
cleanup_table_sysc_work_loop:
- .quad sysc_work_loop, sysc_reschedule
+ .quad sysc_work_loop, sysc_work_done
cleanup_table_io_return:
.quad io_return, io_leave
cleanup_table_io_leave:
.quad io_leave, io_done
cleanup_table_io_work_loop:
- .quad io_work_loop, io_mcck_pending
+ .quad io_work_loop, io_work_done
cleanup_critical:
clc 8(8,%r12),BASED(cleanup_table_system_call)
cleanup_vtime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+24)
jhe cleanup_stime
- tm SP_PSW+1(%r15),0x01 # interrupting from user ?
- jz cleanup_novtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
cleanup_stime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+32)
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
cleanup_update:
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-cleanup_novtime:
#endif
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_system_call+8)
la %r12,__LC_RETURN_PSW
2: la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave_insn:
+ .quad sysc_done - 4
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- .quad sysc_leave + 16
+ .quad sysc_done - 8
#endif
- .quad sysc_leave + 12
cleanup_io_return:
mvc __LC_RETURN_PSW(8),0(%r12)
2: la %r12,__LC_RETURN_PSW
br %r14
cleanup_io_leave_insn:
+ .quad io_done - 4
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- .quad io_leave + 20
+ .quad io_done - 8
#endif
- .quad io_leave + 16
/*
* Integer constants
*/
.align 4
.Lconst:
-.Lc_pactive: .long PREEMPT_ACTIVE
.Lnr_syscalls: .long NR_syscalls
.L0x0130: .short 0x130
.L0x0140: .short 0x140
void machine_restart(char *command)
{
- if (!in_interrupt() || oops_in_progress)
+ if ((!in_interrupt() && !in_atomic()) || oops_in_progress)
/*
* Only unblank the console if we are called in enabled
* context or a bust_spinlocks cleared the way for us.
if (s390_noexec) {
printk("S390 execute protection active, ");
set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY);
- return;
- }
- if (switch_amode) {
+ } else if (switch_amode) {
printk("S390 address spaces switched, ");
set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY);
}
+#ifdef CONFIG_TRACE_IRQFLAGS
+ sysc_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
+ io_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
+#endif
}
static void __init
}
EXPORT_SYMBOL(smp_call_function_single);
-static void do_send_stop(void)
+void smp_send_stop(void)
{
int cpu, rc;
- /* stop all processors */
- for_each_online_cpu(cpu) {
- if (cpu == smp_processor_id())
- continue;
- do {
- rc = signal_processor(cpu, sigp_stop);
- } while (rc == sigp_busy);
- }
-}
+ /* Disable all interrupts/machine checks */
+ __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
-static void do_store_status(void)
-{
- int cpu, rc;
+ /* write magic number to zero page (absolute 0) */
+ lowcore_ptr[smp_processor_id()]->panic_magic = __PANIC_MAGIC;
- /* store status of all processors in their lowcores (real 0) */
+ /* stop all processors */
for_each_online_cpu(cpu) {
if (cpu == smp_processor_id())
continue;
do {
- rc = signal_processor_p(
- (__u32)(unsigned long) lowcore_ptr[cpu], cpu,
- sigp_store_status_at_address);
+ rc = signal_processor(cpu, sigp_stop);
} while (rc == sigp_busy);
- }
-}
-static void do_wait_for_stop(void)
-{
- int cpu;
-
- /* Wait for all other cpus to enter stopped state */
- for_each_online_cpu(cpu) {
- if (cpu == smp_processor_id())
- continue;
while (!smp_cpu_not_running(cpu))
cpu_relax();
}
}
-/*
- * this function sends a 'stop' sigp to all other CPUs in the system.
- * it goes straight through.
- */
-void smp_send_stop(void)
-{
- /* Disable all interrupts/machine checks */
- __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
-
- /* write magic number to zero page (absolute 0) */
- lowcore_ptr[smp_processor_id()]->panic_magic = __PANIC_MAGIC;
-
- /* stop other processors. */
- do_send_stop();
-
- /* wait until other processors are stopped */
- do_wait_for_stop();
-
- /* store status of other processors. */
- do_store_status();
-}
-
/*
* Reboot, halt and power_off routines for SMP.
*/
bust_spinlocks(1);
printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
print_modules();
+ notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV);
show_regs(regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
static struct ctl_table cmm_table[] = {
{
- .ctl_name = VM_CMM_PAGES,
.procname = "cmm_pages",
.mode = 0644,
.proc_handler = &cmm_pages_handler,
},
{
- .ctl_name = VM_CMM_TIMED_PAGES,
.procname = "cmm_timed_pages",
.mode = 0644,
.proc_handler = &cmm_pages_handler,
},
{
- .ctl_name = VM_CMM_TIMEOUT,
.procname = "cmm_timeout",
.mode = 0644,
.proc_handler = &cmm_timeout_handler,
.end = PA_AREA5_IO + 0x80c,
.flags = IORESOURCE_MEM,
},
+#ifndef CONFIG_RTS7751R2D_1 /* For R2D-1 polling is preferred */
[2] = {
.start = IRQ_CF_IDE,
.flags = IORESOURCE_IRQ,
},
+#endif
};
static struct pata_platform_info pata_info = {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Mon Jun 11 10:24:57 2007
+# Linux kernel version: 2.6.24-rc2
+# Tue Nov 13 20:32:39 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_SPECULATIVE_EXECUTION=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
#
# Board support
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
+CONFIG_GUSA=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_AX88796=y
+CONFIG_AX88796_93CX6=y
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Sound
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
-#
-# I2C RTC drivers
-#
-
#
# SPI RTC drivers
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_RTC_DRV_SH=y
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_SH_KGDB is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc1
-# Fri Nov 2 14:30:49 2007
+# Linux kernel version: 2.6.24-rc2
+# Tue Nov 13 20:34:57 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_AX88796=y
+CONFIG_AX88796_93CX6=y
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
static struct resource sh7780_io_resource = {
.name = "SH7780_IO",
- .start = 0x2000,
- .end = 0x2000 + SH7780_PCI_IO_SIZE - 1,
+ .start = SH7780_PCI_IO_BASE,
+ .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource se7780_io_resource = {
.name = "SH7780_IO",
- .start = 0x2000,
- .end = 0x2000 + SH7780_PCI_IO_SIZE - 1,
+ .start = SH7780_PCI_IO_BASE,
+ .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-#define SH7780_PCI_IO_BASE 0xFE400000 /* IO space base address */
+#define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */
#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
pmd_t *pmd;
pte_t *pte;
pte_t entry;
- struct mm_struct *mm = current->mm;
- spinlock_t *ptl = NULL;
- int ret = 1;
#ifdef CONFIG_SH_KGDB
if (kgdb_nofault && kgdb_bus_err_hook)
*/
if (address >= P3SEG && address < P3_ADDR_MAX) {
pgd = pgd_offset_k(address);
- mm = NULL;
} else {
- if (unlikely(address >= TASK_SIZE || !mm))
+ if (unlikely(address >= TASK_SIZE || !current->mm))
return 1;
- pgd = pgd_offset(mm, address);
+ pgd = pgd_offset(current->mm, address);
}
pud = pud_offset(pgd, address);
if (pmd_none_or_clear_bad(pmd))
return 1;
- if (mm)
- pte = pte_offset_map_lock(mm, pmd, address, &ptl);
- else
- pte = pte_offset_kernel(pmd, address);
-
+ pte = pte_offset_kernel(pmd, address);
entry = *pte;
if (unlikely(pte_none(entry) || pte_not_present(entry)))
- goto unlock;
+ return 1;
if (unlikely(writeaccess && !pte_write(entry)))
- goto unlock;
+ return 1;
if (writeaccess)
entry = pte_mkdirty(entry);
entry = pte_mkyoung(entry);
-#ifdef CONFIG_CPU_SH4
- /*
- * ITLB is not affected by "ldtlb" instruction.
- * So, we need to flush the entry by ourselves.
- */
- local_flush_tlb_one(get_asid(), address & PAGE_MASK);
-#endif
-
set_pte(pte, entry);
update_mmu_cache(NULL, address, entry);
- ret = 0;
-unlock:
- if (mm)
- pte_unmap_unlock(pte, ptl);
- return ret;
+
+ return 0;
}
int err = check_cpu_node(dp->node, &cur_inst,
compare, compare_arg,
prom_node, mid);
- if (!err)
+ if (!err) {
+ of_node_put(dp);
return 0;
+ }
}
return -ENODEV;
pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
if ((pcic->pcic_config_space_addr =
ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) {
- prom_printf("PCIC: Error, cannot map"
+ prom_printf("PCIC: Error, cannot map "
"PCI Configuration Space Address.\n");
prom_halt();
}
pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
if ((pcic->pcic_config_space_data =
ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) {
- prom_printf("PCIC: Error, cannot map"
+ prom_printf("PCIC: Error, cannot map "
"PCI Configuration Space Data.\n");
prom_halt();
}
* board in a PCI slot. We must remap it
* under 64K but it is not done yet. XXX
*/
- printk("PCIC: Skipping I/O space at 0x%lx,"
- "this will Oops if a driver attaches;"
+ printk("PCIC: Skipping I/O space at 0x%lx, "
+ "this will Oops if a driver attaches "
"device '%s' at %02x:%02x)\n", address,
namebuf, dev->bus->number, dev->devfn);
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc1
-# Wed Oct 31 15:36:47 2007
+# Linux kernel version: 2.6.24-rc4
+# Tue Dec 4 00:37:59 2007
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
-/* $Id: chmc.c,v 1.4 2002/01/08 16:00:14 davem Exp $
- * memctrlr.c: Driver for UltraSPARC-III memory controller.
+/* memctrlr.c: Driver for UltraSPARC-III memory controller.
*
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2001, 2007 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
#include <linux/init.h>
#include <asm/spitfire.h>
#include <asm/chmctrl.h>
+#include <asm/cpudata.h>
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/io.h>
*/
static u64 read_mcreg(struct mctrl_info *mp, unsigned long offset)
{
- unsigned long ret;
- int this_cpu = get_cpu();
+ unsigned long ret, this_cpu;
+
+ preempt_disable();
+
+ this_cpu = real_hard_smp_processor_id();
if (mp->portid == this_cpu) {
__asm__ __volatile__("ldxa [%1] %2, %0"
: "r" (mp->regs + offset),
"i" (ASI_PHYS_BYPASS_EC_E));
}
- put_cpu();
+
+ preempt_enable();
return ret;
}
isa_br = kzalloc(sizeof(*isa_br), GFP_KERNEL);
if (!isa_br) {
printk(KERN_DEBUG "isa: cannot allocate sparc_isa_bridge");
+ pci_dev_put(pdev);
return;
}
printk(KERN_DEBUG "isa: device registration error for %s!\n",
dp->path_component_name);
kfree(isa_br);
+ pci_dev_put(pdev);
return;
}
unsigned long major, minor;
struct mdesc_handle *hp;
const u64 *v;
+ int err;
u64 mp;
hp = mdesc_grab();
return -ENODEV;
mp = mdesc_node_by_name(hp, MDESC_NODE_NULL, "platform");
+ err = -ENODEV;
if (mp == MDESC_NODE_NULL)
- return -ENODEV;
+ goto out;
v = mdesc_get_property(hp, mp, "domaining-enabled", NULL);
if (!v)
- return -ENODEV;
+ goto out;
major = 1;
minor = 0;
if (sun4v_hvapi_register(HV_GRP_LDOM, major, &minor)) {
printk(KERN_INFO PFX "Could not register LDOM hvapi.\n");
- return -ENODEV;
+ goto out;
}
printk(KERN_INFO "%s", version);
if (!*v) {
printk(KERN_INFO PFX "Domaining disabled.\n");
- return -ENODEV;
+ goto out;
}
ldom_domaining_enabled = 1;
+ err = 0;
- return 0;
+out:
+ mdesc_release(hp);
+ return err;
}
core_initcall(ldc_init);
}
prop = of_find_property(dp, "reg", NULL);
+ if (!prop) {
+ prom_printf("SUN4V_PCI: Could not find config registers\n");
+ prom_halt();
+ }
regs = prop->value;
devhandle = (regs->phys_addr >> 32UL) & 0x0fffffff;
t[i].rt, t[i].master, t[i].diff, t[i].lat);
#endif
- printk(KERN_INFO "CPU %d: synchronized TICK with master CPU (last diff %ld cycles,"
- "maxerr %lu cycles)\n", smp_processor_id(), delta, rt);
+ printk(KERN_INFO "CPU %d: synchronized TICK with master CPU "
+ "(last diff %ld cycles, maxerr %lu cycles)\n",
+ smp_processor_id(), delta, rt);
}
static void smp_start_sync_tick_client(int cpu);
*/
static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
- u64 pstate, ver;
+ u64 pstate, ver, busy_mask;
int nack_busy_id, is_jbus, need_more;
if (cpus_empty(mask))
"i" (ASI_INTR_W));
nack_busy_id = 0;
+ busy_mask = 0;
{
int i;
for_each_cpu_mask(i, mask) {
u64 target = (i << 14) | 0x70;
- if (!is_jbus)
+ if (is_jbus) {
+ busy_mask |= (0x1UL << (i * 2));
+ } else {
target |= (nack_busy_id << 24);
+ busy_mask |= (0x1UL <<
+ (nack_busy_id * 2));
+ }
__asm__ __volatile__(
"stxa %%g0, [%0] %1\n\t"
"membar #Sync\n\t"
/* Now, poll for completion. */
{
- u64 dispatch_stat;
+ u64 dispatch_stat, nack_mask;
long stuck;
stuck = 100000 * nack_busy_id;
+ nack_mask = busy_mask << 1;
do {
__asm__ __volatile__("ldxa [%%g0] %1, %0"
: "=r" (dispatch_stat)
: "i" (ASI_INTR_DISPATCH_STAT));
- if (dispatch_stat == 0UL) {
+ if (!(dispatch_stat & (busy_mask | nack_mask))) {
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: : "r" (pstate));
if (unlikely(need_more)) {
}
if (!--stuck)
break;
- } while (dispatch_stat & 0x5555555555555555UL);
+ } while (dispatch_stat & busy_mask);
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: : "r" (pstate));
- if ((dispatch_stat & ~(0x5555555555555555UL)) == 0) {
+ if (dispatch_stat & busy_mask) {
/* Busy bits will not clear, continue instead
* of freezing up on this cpu.
*/
bool
default y
+config X86_32
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ def_bool y
+
config 64BIT
bool
default n
$(Q)mkdir -p $(objtree)/include/asm-um
$(Q)ln -fsn $(srctree)/include/asm-$(HEADER_ARCH) include/asm-um/arch
else
- $(Q)cd $(TOPDIR)/include/asm-um && ln -fsn ../asm-$(SUBARCH) arch
+ $(Q)cd $(TOPDIR)/include/asm-um && ln -fsn ../asm-$(HEADER_ARCH) arch
endif
$(objtree)/$(ARCH_DIR)/include:
endif
endif
-KBUILD_CFLAGS += -DCONFIG_X86_32
-KBUILD_AFLAGS += -DCONFIG_X86_32
-CONFIG_X86_32 := y
-export CONFIG_X86_32
-
# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
include $(srctree)/arch/x86/Makefile_32.cpu
int generic_console_write(int fd, const char *buf, int n)
{
+ sigset_t old, no_sigio;
struct termios save, new;
int err;
if (isatty(fd)) {
+ sigemptyset(&no_sigio);
+ sigaddset(&no_sigio, SIGIO);
+ if (sigprocmask(SIG_BLOCK, &no_sigio, &old))
+ goto error;
+
CATCH_EINTR(err = tcgetattr(fd, &save));
if (err)
goto error;
* Restore raw mode, in any case; we *must* ignore any error apart
* EINTR, except for debug.
*/
- if (isatty(fd))
+ if (isatty(fd)) {
CATCH_EINTR(tcsetattr(fd, TCSAFLUSH, &save));
+ sigprocmask(SIG_SETMASK, &old, NULL);
+ }
+
return err;
error:
return -errno;
if (pkt_len > 0) {
skb_trim(skb, pkt_len);
skb->protocol = (*lp->protocol)(skb);
- netif_rx(skb);
lp->stats.rx_bytes += skb->len;
lp->stats.rx_packets++;
+ netif_rx(skb);
return pkt_len;
}
"errno = %d\n", -n);
else if(list_empty(&dev->restart))
list_add(&dev->restart, &restart);
+ kfree(io_req);
return;
}
{
struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
- if(setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
+ if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
printk(UM_KERN_ERR "disable_timer - setitimer failed, "
"errno = %d\n", errno);
return timeval_to_ns(&tv);
}
+#ifdef UML_CONFIG_NO_HZ
+static int after_sleep_interval(struct timespec *ts)
+{
+ return 0;
+}
+#else
+static inline long long timespec_to_us(const struct timespec *ts)
+{
+ return ((long long) ts->tv_sec * UM_USEC_PER_SEC) +
+ ts->tv_nsec / UM_NSEC_PER_USEC;
+}
+
+static int after_sleep_interval(struct timespec *ts)
+{
+ int usec = UM_USEC_PER_SEC / UM_HZ;
+ long long start_usecs = timespec_to_us(ts);
+ struct timeval tv;
+ struct itimerval interval;
+
+ /*
+ * It seems that rounding can increase the value returned from
+ * setitimer to larger than the one passed in. Over time,
+ * this will cause the remaining time to be greater than the
+ * tick interval. If this happens, then just reduce the first
+ * tick to the interval value.
+ */
+ if (start_usecs > usec)
+ start_usecs = usec;
+ tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC,
+ .tv_usec = start_usecs % UM_USEC_PER_SEC });
+ interval = ((struct itimerval) { { 0, usec }, tv });
+
+ if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1)
+ return -errno;
+
+ return 0;
+}
+#endif
+
extern void alarm_handler(int sig, struct sigcontext *sc);
void idle_sleep(unsigned long long nsecs)
{
- struct timespec ts = { .tv_sec = nsecs / UM_NSEC_PER_SEC,
- .tv_nsec = nsecs % UM_NSEC_PER_SEC };
+ struct timespec ts;
+
+ /*
+ * nsecs can come in as zero, in which case, this starts a
+ * busy loop. To prevent this, reset nsecs to the tick
+ * interval if it is zero.
+ */
+ if (nsecs == 0)
+ nsecs = UM_NSEC_PER_SEC / UM_HZ;
+ ts = ((struct timespec) { .tv_sec = nsecs / UM_NSEC_PER_SEC,
+ .tv_nsec = nsecs % UM_NSEC_PER_SEC });
if (nanosleep(&ts, &ts) == 0)
alarm_handler(SIGVTALRM, NULL);
+ after_sleep_interval(&ts);
}
bool
default X86_64
-
-
+config ARCH_SUPPORTS_OPROFILE
+ bool
+ default y
config ZONE_DMA32
config X86_HT
bool
- depends on SMP && !(X86_VISWS || X86_VOYAGER || MK8)
+ depends on SMP
+ depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || (X86_64 && !MK8)
default y
config X86_BIOS_REBOOT
$(srctree)/arch/x86/Makefile%: ;
ifeq ($(CONFIG_X86_32),y)
+ UTS_MACHINE := i386
include $(srctree)/arch/x86/Makefile_32
else
+ UTS_MACHINE := x86_64
include $(srctree)/arch/x86/Makefile_64
endif
-
-
-
movw %ax, %es
cld
-# Apparently some ancient versions of LILO invoked the kernel
-# with %ss != %ds, which happened to work by accident for the
-# old code. If the CAN_USE_HEAP flag is set in loadflags, or
-# %ss != %ds, then adjust the stack pointer.
+# Apparently some ancient versions of LILO invoked the kernel with %ss != %ds,
+# which happened to work by accident for the old code. Recalculate the stack
+# pointer if %ss is invalid. Otherwise leave it alone, LOADLIN sets up the
+# stack behind its own code, so we can't blindly put it directly past the heap.
- # Smallest possible stack we can tolerate
- movw $(_end+STACK_SIZE), %cx
-
- movw heap_end_ptr, %dx
- addw $512, %dx
- jnc 1f
- xorw %dx, %dx # Wraparound - whole segment available
-1: testb $CAN_USE_HEAP, loadflags
- jnz 2f
-
- # No CAN_USE_HEAP
movw %ss, %dx
cmpw %ax, %dx # %ds == %ss?
movw %sp, %dx
- # If so, assume %sp is reasonably set, otherwise use
- # the smallest possible stack.
- jne 4f # -> Smallest possible stack...
+ je 2f # -> assume %sp is reasonably set
+
+ # Invalid %ss, make up a new stack
+ movw $_end, %dx
+ testb $CAN_USE_HEAP, loadflags
+ jz 1f
+ movw heap_end_ptr, %dx
+1: addw $STACK_SIZE, %dx
+ jnc 2f
+ xorw %dx, %dx # Prevent wraparound
- # Make sure the stack is at least minimum size. Take a value
- # of zero to mean "full segment."
-2:
+2: # Now %dx should point to the end of our stack space
andw $~3, %dx # dword align (might as well...)
jnz 3f
movw $0xfffc, %dx # Make sure we're not zero
-3: cmpw %cx, %dx
- jnb 5f
-4: movw %cx, %dx # Minimum value we can possibly use
-5: movw %ax, %ss
+3: movw %ax, %ss
movzwl %dx, %esp # Clear upper half of %esp
sti # Now we should have a working stack
if (cpu_has(c, X86_FEATURE_EST))
buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP;
+ if (cpu_has(c, X86_FEATURE_ACPI))
+ buf[2] |= ACPI_PDC_T_FFH;
+
obj->type = ACPI_TYPE_BUFFER;
obj->buffer.length = 12;
obj->buffer.pointer = (u8 *) buf;
__setup("acpi_sleep=", acpi_sleep_setup);
-void acpi_pci_link_exit(void)
-{
-}
wakeup_code_start = .
.code16
- movw $0xb800, %ax
- movw %ax,%fs
- movw $0x0e00 + 'L', %fs:(0x10)
-
cli
cld
* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
* needed on AMD.
*/
- if (modern_apic())
+ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
/*
* Wait for idle.
static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) {}
#endif
-static void free_cache_attributes(unsigned int cpu)
+static void __cpuinit free_cache_attributes(unsigned int cpu)
{
int i;
#include <asm/nmi.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
+#include <asm/hpet.h>
#include <linux/kdebug.h>
#include <asm/smp.h>
lapic_shutdown();
#if defined(CONFIG_X86_IO_APIC)
disable_IO_APIC();
+#endif
+#ifdef CONFIG_HPET_TIMER
+ hpet_disable();
#endif
crash_save_cpu(regs, safe_smp_processor_id());
}
jb 10b
movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
+ /* Do an early initialization of the fixmap area */
+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
+ movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax
+ addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
+ movl %eax, 4092(%edx)
+
xorl %ebx,%ebx /* This is the boot CPU (BSP) */
jmp 3f
/*
.section .init.text,"ax",@progbits
#endif
- /* Do an early initialization of the fixmap area */
- movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
- movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax
- addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
- movl %eax, 4092(%edx)
-
#ifdef CONFIG_SMP
ENTRY(startup_32_smp)
cld
}
fs_initcall(hpet_late_init);
+void hpet_disable(void)
+{
+ if (is_hpet_capable()) {
+ unsigned long cfg = hpet_readl(HPET_CFG);
+
+ if (hpet_legacy_int_enabled) {
+ cfg &= ~HPET_CFG_LEGACY;
+ hpet_legacy_int_enabled = 0;
+ }
+ cfg &= ~HPET_CFG_ENABLE;
+ hpet_writel(cfg, HPET_CFG);
+ }
+}
+
#ifdef CONFIG_HPET_EMULATE_RTC
/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/desc.h>
+#include <asm/pgtable.h>
EXPORT_SYMBOL(__down_failed);
EXPORT_SYMBOL(__down_failed_interruptible);
#endif
EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(empty_zero_page);
#define default_MCA_trigger(idx) (1)
#define default_MCA_polarity(idx) (0)
-static int __init MPBIOS_polarity(int idx)
+static int MPBIOS_polarity(int idx)
{
int bus = mp_irqs[idx].mpc_srcbus;
int polarity;
{
int apic1, pin1, apic2, pin2;
int vector;
+ unsigned int ver;
+
+ ver = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(ver);
/*
* get/set the timer IRQ vector:
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
- * disabled in the local APIC.
+ * disabled in the local APIC. Finally timer interrupts
+ * need to be acknowledged manually in the 8259A for
+ * timer_interrupt() and for the i82489DX when using
+ * the NMI watchdog.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = 1;
+ timer_ack = !cpu_has_tsc;
+ timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
if (timer_over_8254 > 0)
enable_8259A_irq(0);
return 0;
}
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+ int i;
+
+ if (skip_ioapic_setup)
+ return -1;
+
+ for (i = 0; i < mp_irq_entries; i++)
+ if (mp_irqs[i].mpc_irqtype == mp_INT &&
+ mp_irqs[i].mpc_srcbusirq == bus_irq)
+ break;
+ if (i >= mp_irq_entries)
+ return -1;
+
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return 0;
+}
+
#endif /* CONFIG_ACPI */
static int __init parse_disable_timer_pin_1(char *arg)
#define default_PCI_trigger(idx) (1)
#define default_PCI_polarity(idx) (1)
-static int __init MPBIOS_polarity(int idx)
+static int MPBIOS_polarity(int idx)
{
int bus = mp_irqs[idx].mpc_srcbus;
int polarity;
return 0;
}
-#endif /* CONFIG_ACPI */
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+ int i;
+
+ if (skip_ioapic_setup)
+ return -1;
+
+ for (i = 0; i < mp_irq_entries; i++)
+ if (mp_irqs[i].mpc_irqtype == mp_INT &&
+ mp_irqs[i].mpc_srcbusirq == bus_irq)
+ break;
+ if (i >= mp_irq_entries)
+ return -1;
+
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return 0;
+}
+
+#endif /* CONFIG_ACPI */
/*
* This function currently is only a helper for the i386 smp boot process where
}
}
#endif
+
/*
* returns non-zero if opcode modifies the interrupt flag.
*/
-static __always_inline int is_IF_modifier(kprobe_opcode_t *insn)
+static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
{
switch (*insn) {
case 0xfa: /* cli */
#include <asm/smp.h>
#include <asm/nmi.h>
+#include <asm/timer.h>
#include "mach_traps.h"
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
- return -1;
+ goto error;
printk(KERN_INFO "Testing NMI watchdog ... ");
if (!per_cpu(wd_enabled, cpu))
continue;
if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+ printk(KERN_WARNING "WARNING: CPU#%d: NMI "
+ "appears to be stuck (%d->%d)!\n",
cpu,
prev_nmi_count[cpu],
nmi_count(cpu));
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
- return -1;
+ goto error;
}
printk("OK.\n");
kfree(prev_nmi_count);
return 0;
+error:
+ timer_ack = !cpu_has_tsc;
+
+ return -1;
}
/* This needs to happen later in boot so counters are working */
late_initcall(check_nmi_watchdog);
if (!per_cpu(wd_enabled, cpu))
continue;
if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
- printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+ printk(KERN_WARNING "WARNING: CPU#%d: NMI "
+ "appears to be stuck (%d->%d)!\n",
cpu,
counts[cpu],
cpu_pda(cpu)->__nmi_count);
};
EXPORT_SYMBOL_GPL(pv_time_ops);
-EXPORT_SYMBOL_GPL(pv_cpu_ops);
-EXPORT_SYMBOL_GPL(pv_mmu_ops);
+EXPORT_SYMBOL (pv_cpu_ops);
+EXPORT_SYMBOL (pv_mmu_ops);
EXPORT_SYMBOL_GPL(pv_apic_ops);
EXPORT_SYMBOL_GPL(pv_info);
EXPORT_SYMBOL (pv_irq_ops);
#include <asm/gart.h>
#include <asm/calgary.h>
-int iommu_merge __read_mostly = 1;
+int iommu_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_merge);
dma_addr_t bad_dma_address __read_mostly;
#include <linux/reboot.h>
#include <asm/uaccess.h>
#include <asm/apic.h>
+#include <asm/hpet.h>
#include <asm/desc.h>
#include "mach_reboot.h"
#include <asm/reboot_fixups.h>
#ifdef CONFIG_X86_IO_APIC
disable_IO_APIC();
#endif
+#ifdef CONFIG_HPET_TIMER
+ hpet_disable();
+#endif
}
void __attribute__((weak)) mach_reboot_fixups(void)
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/apic.h>
+#include <asm/hpet.h>
#include <asm/gart.h>
/*
disable_IO_APIC();
+#ifdef CONFIG_HPET_TIMER
+ hpet_disable();
+#endif
local_irq_restore(flags);
pci_iommu_shutdown();
static struct i386_cpu cpu_devices[NR_CPUS];
-int arch_register_cpu(int num)
+int __cpuinit arch_register_cpu(int num)
{
/*
* CPU0 cannot be offlined due to several
}
#ifdef CONFIG_HOTPLUG_CPU
-void arch_unregister_cpu(int num) {
+void arch_unregister_cpu(int num)
+{
return unregister_cpu(&cpu_devices[num].cpu);
}
EXPORT_SYMBOL(arch_register_cpu);
{
unsigned long stack;
+ printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+ current->pid, current->comm, print_tainted(),
+ init_utsname()->release,
+ (int)strcspn(init_utsname()->version, " "),
+ init_utsname()->version);
show_trace(current, NULL, &stack);
}
unsigned int condition;
struct task_struct *tsk = current;
+ trace_hardirqs_fixup();
+
get_debugreg(condition, 6);
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
#include <linux/uaccess.h>
#include <linux/bug.h>
#include <linux/kdebug.h>
+#include <linux/utsname.h>
#if defined(CONFIG_EDAC)
#include <linux/edac.h>
void dump_stack(void)
{
unsigned long dummy;
+
+ printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+ current->pid, current->comm, print_tainted(),
+ init_utsname()->release,
+ (int)strcspn(init_utsname()->version, " "),
+ init_utsname()->version);
show_trace(NULL, NULL, &dummy);
}
struct task_struct *tsk = current;
siginfo_t info;
+ trace_hardirqs_fixup();
+
get_debugreg(condition, 6);
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
bool "Lguest guest support"
select PARAVIRT
depends on !X86_PAE
+ depends on !(X86_VISWS || X86_VOYAGER)
select VIRTIO
select VIRTIO_RING
select VIRTIO_CONSOLE
/* Setup the direct mapping of the physical memory at PAGE_OFFSET.
This runs before bootmem is initialized and gets pages directly from the
physical memory. To access them they are temporarily mapped. */
-void __meminit init_memory_mapping(unsigned long start, unsigned long end)
+void __init_refok init_memory_mapping(unsigned long start, unsigned long end)
{
unsigned long next;
return 0;
}
-static struct dmi_system_id acpi_pciprobe_dmi_table[] = {
+static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
/*
* Systems where PCI IO resource ISA alignment can be skipped
* when the ISA enable bit in the bridge control is not set
},
},
#endif
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant DL385 G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant DL585 G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ },
+ },
{}
};
if (!xen_start_info)
return;
- BUG_ON(memcmp(xen_start_info->magic, "xen-3.0", 7) != 0);
+ BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
/* Install Xen paravirt ops */
pv_info = xen_info;
if (pte & 1)
pte = phys_to_machine(XPADDR(pte)).maddr;
+ pte &= ~_PAGE_PCD;
+
return (pte_t){ pte, pte >> 32 };
}
if (pte & _PAGE_PRESENT)
pte = phys_to_machine(XPADDR(pte)).maddr;
+ pte &= ~_PAGE_PCD;
+
return (pte_t){ pte };
}
if (pkt_len > 0) {
skb_trim(skb, pkt_len);
skb->protocol = lp->tp.protocol(skb);
- // netif_rx(skb);
- netif_rx_ni(skb);
lp->stats.rx_bytes += skb->len;
lp->stats.rx_packets++;
+ // netif_rx(skb);
+ netif_rx_ni(skb);
return pkt_len;
}
kfree_skb(skb);
static struct dentry *blk_create_tree(const char *blk_name)
{
struct dentry *dir = NULL;
+ int created = 0;
mutex_lock(&blk_tree_mutex);
blk_tree_root = debugfs_create_dir("block", NULL);
if (!blk_tree_root)
goto err;
+ created = 1;
}
dir = debugfs_create_dir(blk_name, blk_tree_root);
if (dir)
root_users++;
- else
- blk_remove_root();
+ else {
+ /* Delete root only if we created it */
+ if (created)
+ blk_remove_root();
+ }
err:
mutex_unlock(&blk_tree_mutex);
disk->part = kmalloc_node(size,
GFP_KERNEL | __GFP_ZERO, node_id);
if (!disk->part) {
+ free_disk_stats(disk);
kfree(disk);
return NULL;
}
return queue_var_show(max_hw_sectors_kb, (page));
}
-static ssize_t queue_max_segments_show(struct request_queue *q, char *page)
-{
- return queue_var_show(q->max_phys_segments, page);
-}
-
-static ssize_t queue_max_segments_store(struct request_queue *q,
- const char *page, size_t count)
-{
- unsigned long segments;
- ssize_t ret = queue_var_store(&segments, page, count);
- spin_lock_irq(q->queue_lock);
- q->max_phys_segments = segments;
- spin_unlock_irq(q->queue_lock);
-
- return ret;
-}
static struct queue_sysfs_entry queue_requests_entry = {
.attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR },
.show = queue_requests_show,
.show = queue_max_hw_sectors_show,
};
-static struct queue_sysfs_entry queue_max_segments_entry = {
- .attr = {.name = "max_segments", .mode = S_IRUGO | S_IWUSR },
- .show = queue_max_segments_show,
- .store = queue_max_segments_store,
-};
-
static struct queue_sysfs_entry queue_iosched_entry = {
.attr = {.name = "scheduler", .mode = S_IRUGO | S_IWUSR },
.show = elv_iosched_show,
&queue_ra_entry.attr,
&queue_max_hw_sectors_entry.attr,
&queue_max_sectors_entry.attr,
- &queue_max_segments_entry.attr,
&queue_iosched_entry.attr,
NULL,
};
return;
inst->alg.cra_flags |= CRYPTO_ALG_DEAD;
+ if (hlist_unhashed(&inst->list))
+ return;
+
if (!tmpl || !crypto_tmpl_get(tmpl))
return;
LIST_HEAD(list);
int err = -EINVAL;
- if (inst->alg.cra_destroy)
- goto err;
-
err = crypto_check_alg(&inst->alg);
if (err)
goto err;
.tfm = auth,
};
u8 *hash = aead_request_ctx(req);
- struct scatterlist *dst;
- unsigned int cryptlen;
+ struct scatterlist *dst = req->dst;
+ unsigned int cryptlen = req->cryptlen;
int err;
hash = (u8 *)ALIGN((unsigned long)hash + crypto_hash_alignmask(auth),
if (err)
goto auth_unlock;
- cryptlen = req->cryptlen;
- dst = req->dst;
err = crypto_hash_update(&desc, dst, cryptlen);
if (err)
goto auth_unlock;
};
u8 *ohash = aead_request_ctx(req);
u8 *ihash;
- struct scatterlist *src;
- unsigned int cryptlen;
+ struct scatterlist *src = req->src;
+ unsigned int cryptlen = req->cryptlen;
unsigned int authsize;
int err;
if (err)
goto auth_unlock;
- cryptlen = req->cryptlen;
- src = req->src;
err = crypto_hash_update(&desc, src, cryptlen);
if (err)
goto auth_unlock;
#define ROUNDS 16
struct fcrypt_ctx {
- u32 sched[ROUNDS];
+ __be32 sched[ROUNDS];
};
/* Rotate right two 32 bit numbers as a 56 bit number */
* /afs/transarc.com/public/afsps/afs.rel31b.export-src/rxkad/sboxes.h
*/
#undef Z
-#define Z(x) __constant_be32_to_cpu(x << 3)
-static const u32 sbox0[256] = {
+#define Z(x) __constant_cpu_to_be32(x << 3)
+static const __be32 sbox0[256] = {
Z(0xea), Z(0x7f), Z(0xb2), Z(0x64), Z(0x9d), Z(0xb0), Z(0xd9), Z(0x11),
Z(0xcd), Z(0x86), Z(0x86), Z(0x91), Z(0x0a), Z(0xb2), Z(0x93), Z(0x06),
Z(0x0e), Z(0x06), Z(0xd2), Z(0x65), Z(0x73), Z(0xc5), Z(0x28), Z(0x60),
};
#undef Z
-#define Z(x) __constant_be32_to_cpu((x << 27) | (x >> 5))
-static const u32 sbox1[256] = {
+#define Z(x) __constant_cpu_to_be32((x << 27) | (x >> 5))
+static const __be32 sbox1[256] = {
Z(0x77), Z(0x14), Z(0xa6), Z(0xfe), Z(0xb2), Z(0x5e), Z(0x8c), Z(0x3e),
Z(0x67), Z(0x6c), Z(0xa1), Z(0x0d), Z(0xc2), Z(0xa2), Z(0xc1), Z(0x85),
Z(0x6c), Z(0x7b), Z(0x67), Z(0xc6), Z(0x23), Z(0xe3), Z(0xf2), Z(0x89),
};
#undef Z
-#define Z(x) __constant_be32_to_cpu(x << 11)
-static const u32 sbox2[256] = {
+#define Z(x) __constant_cpu_to_be32(x << 11)
+static const __be32 sbox2[256] = {
Z(0xf0), Z(0x37), Z(0x24), Z(0x53), Z(0x2a), Z(0x03), Z(0x83), Z(0x86),
Z(0xd1), Z(0xec), Z(0x50), Z(0xf0), Z(0x42), Z(0x78), Z(0x2f), Z(0x6d),
Z(0xbf), Z(0x80), Z(0x87), Z(0x27), Z(0x95), Z(0xe2), Z(0xc5), Z(0x5d),
};
#undef Z
-#define Z(x) __constant_be32_to_cpu(x << 19)
-static const u32 sbox3[256] = {
+#define Z(x) __constant_cpu_to_be32(x << 19)
+static const __be32 sbox3[256] = {
Z(0xa9), Z(0x2a), Z(0x48), Z(0x51), Z(0x84), Z(0x7e), Z(0x49), Z(0xe2),
Z(0xb5), Z(0xb7), Z(0x42), Z(0x33), Z(0x7d), Z(0x5d), Z(0xa6), Z(0x12),
Z(0x44), Z(0x48), Z(0x6d), Z(0x28), Z(0xaa), Z(0x20), Z(0x6d), Z(0x57),
*/
#define F_ENCRYPT(R, L, sched) \
do { \
- union lc4 { u32 l; u8 c[4]; } u; \
+ union lc4 { __be32 l; u8 c[4]; } u; \
u.l = sched ^ R; \
L ^= sbox0[u.c[0]] ^ sbox1[u.c[1]] ^ sbox2[u.c[2]] ^ sbox3[u.c[3]]; \
} while(0)
{
const struct fcrypt_ctx *ctx = crypto_tfm_ctx(tfm);
struct {
- u32 l, r;
+ __be32 l, r;
} X;
memcpy(&X, src, sizeof(X));
{
const struct fcrypt_ctx *ctx = crypto_tfm_ctx(tfm);
struct {
- u32 l, r;
+ __be32 l, r;
} X;
memcpy(&X, src, sizeof(X));
k |= (*key) >> 1;
/* Use lower 32 bits for schedule, rotate by 11 each round (16 times) */
- ctx->sched[0x0] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x1] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x2] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x3] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x4] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x5] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x6] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x7] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x8] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0x9] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0xa] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0xb] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0xc] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0xd] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0xe] = be32_to_cpu(k); ror56_64(k, 11);
- ctx->sched[0xf] = be32_to_cpu(k);
+ ctx->sched[0x0] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x1] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x2] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x3] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x4] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x5] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x6] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x7] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x8] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0x9] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0xa] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0xb] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0xc] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0xd] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0xe] = cpu_to_be32(k); ror56_64(k, 11);
+ ctx->sched[0xf] = cpu_to_be32(k);
return 0;
#else
lo |= (*key) >> 1;
/* Use lower 32 bits for schedule, rotate by 11 each round (16 times) */
- ctx->sched[0x0] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x1] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x2] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x3] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x4] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x5] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x6] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x7] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x8] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0x9] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0xa] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0xb] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0xc] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0xd] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0xe] = be32_to_cpu(lo); ror56(hi, lo, 11);
- ctx->sched[0xf] = be32_to_cpu(lo);
+ ctx->sched[0x0] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x1] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x2] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x3] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x4] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x5] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x6] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x7] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x8] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0x9] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0xa] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0xb] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0xc] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0xd] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0xe] = cpu_to_be32(lo); ror56(hi, lo, 11);
+ ctx->sched[0xf] = cpu_to_be32(lo);
return 0;
#endif
}
config ACPI_PROCFS
bool "Deprecated /proc/acpi files"
depends on PROC_FS
- default y
---help---
For backwards compatibility, this option allows
deprecated /proc/acpi/ files to exist, even when
/proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
/proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
/proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
- /proc/acpi/battery (/sys/class/power_supply)
/proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
/proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
and functions which do not yet exist in /sys.
Say N to delete /proc/acpi/ files that have moved to /sys/
-
+config ACPI_PROCFS_POWER
+ bool "Deprecated power /proc/acpi folders"
+ depends on PROC_FS
+ default y
+ ---help---
+ For backwards compatibility, this option allows
+ deprecated power /proc/acpi/ folders to exist, even when
+ they have been replaced by functions in /sys.
+ The deprecated folders (and their replacements) include:
+ /proc/acpi/battery/* (/sys/class/power_supply/*)
+ /proc/acpi/ac_adapter/* (sys/class/power_supply/*)
+ This option has no effect on /proc/acpi/ folders
+ and functions, which do not yet exist in /sys
+
+ Say N to delete power /proc/acpi/ folders that have moved to /sys/
config ACPI_PROC_EVENT
bool "Deprecated /proc/acpi/event support"
depends on PROC_FS
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
-obj-y += cm_sbs.o
+obj-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
obj-$(CONFIG_ACPI_SBS) += sbshc.o
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#endif
MODULE_DESCRIPTION("ACPI AC Adapter Driver");
MODULE_LICENSE("GPL");
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
extern struct proc_dir_entry *acpi_lock_ac_dir(void);
extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
static int acpi_ac_open_fs(struct inode *inode, struct file *file);
#define to_acpi_ac(x) container_of(x, struct acpi_ac, charger);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
static const struct file_operations acpi_ac_fops = {
.open = acpi_ac_open_fs,
.read = seq_read,
return 0;
}
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
if (result)
goto end;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
result = acpi_ac_add_fs(device);
#endif
if (result)
end:
if (result) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_remove_fs(device);
#endif
kfree(ac);
ACPI_ALL_NOTIFY, acpi_ac_notify);
if (ac->charger.dev)
power_supply_unregister(&ac->charger);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_remove_fs(device);
#endif
if (acpi_disabled)
return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_dir = acpi_lock_ac_dir();
if (!acpi_ac_dir)
return -ENODEV;
result = acpi_bus_register_driver(&acpi_ac_driver);
if (result < 0) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_unlock_ac_dir(acpi_ac_dir);
#endif
return -ENODEV;
acpi_bus_unregister_driver(&acpi_ac_driver);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_unlock_ac_dir(acpi_ac_dir);
#endif
#include <linux/types.h>
#include <linux/jiffies.h>
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
extern struct proc_dir_entry *acpi_lock_battery_dir(void);
extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
return POWER_SUPPLY_TECHNOLOGY_NiMH;
if (!strcasecmp("LION", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LION;
- if (!strcasecmp("LI-ION", battery->type))
+ if (!strncasecmp("LI-ION", battery->type, 6))
return POWER_SUPPLY_TECHNOLOGY_LION;
if (!strcasecmp("LiP", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LIPO;
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (battery->state == 0)
val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = acpi_battery_present(battery);
POWER_SUPPLY_PROP_MANUFACTURER,
};
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
inline char *acpi_battery_units(struct acpi_battery *battery)
{
return (battery->power_unit)?"mA":"mW";
FS Interface (/proc)
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
static struct proc_dir_entry *acpi_battery_dir;
static int acpi_battery_print_info(struct seq_file *seq, int result)
acpi_driver_data(device) = battery;
mutex_init(&battery->lock);
acpi_battery_update(battery);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
result = acpi_battery_add_fs(device);
if (result)
goto end;
device->status.battery_present ? "present" : "absent");
end:
if (result) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
kfree(battery);
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY,
acpi_battery_notify);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
sysfs_remove_battery(battery);
{
if (acpi_disabled)
return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_dir = acpi_lock_battery_dir();
if (!acpi_battery_dir)
return -ENODEV;
#endif
if (acpi_bus_register_driver(&acpi_battery_driver) < 0) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_unlock_battery_dir(acpi_battery_dir);
#endif
return -ENODEV;
static void __exit acpi_battery_exit(void)
{
acpi_bus_unregister_driver(&acpi_battery_driver);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_unlock_battery_dir(acpi_battery_dir);
#endif
}
return_ACPI_STATUS(status);
}
}
+
+ /* Special object resolution for elements of a package */
+
+ if ((op->common.parent->common.aml_opcode == AML_PACKAGE_OP) ||
+ (op->common.parent->common.aml_opcode ==
+ AML_VAR_PACKAGE_OP)) {
+ /*
+ * Attempt to resolve the node to a value before we insert it into
+ * the package. If this is a reference to a common data type,
+ * resolve it immediately. According to the ACPI spec, package
+ * elements can only be "data objects" or method references.
+ * Attempt to resolve to an Integer, Buffer, String or Package.
+ * If cannot, return the named reference (for things like Devices,
+ * Methods, etc.) Buffer Fields and Fields will resolve to simple
+ * objects (int/buf/str/pkg).
+ *
+ * NOTE: References to things like Devices, Methods, Mutexes, etc.
+ * will remain as named references. This behavior is not described
+ * in the ACPI spec, but it appears to be an oversight.
+ */
+ obj_desc = (union acpi_operand_object *)op->common.node;
+
+ status =
+ acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR
+ (struct
+ acpi_namespace_node,
+ &obj_desc),
+ walk_state);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ switch (op->common.node->type) {
+ /*
+ * For these types, we need the actual node, not the subobject.
+ * However, the subobject got an extra reference count above.
+ */
+ case ACPI_TYPE_MUTEX:
+ case ACPI_TYPE_METHOD:
+ case ACPI_TYPE_POWER:
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_EVENT:
+ case ACPI_TYPE_REGION:
+ case ACPI_TYPE_DEVICE:
+ case ACPI_TYPE_THERMAL:
+
+ obj_desc =
+ (union acpi_operand_object *)op->common.
+ node;
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * If above resolved to an operand object, we are done. Otherwise,
+ * we have a NS node, we must create the package entry as a named
+ * reference.
+ */
+ if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) !=
+ ACPI_DESC_TYPE_NAMED) {
+ goto exit;
+ }
+ }
}
/* Create and init a new internal ACPI object */
return_ACPI_STATUS(status);
}
+ exit:
*obj_desc_ptr = obj_desc;
return_ACPI_STATUS(AE_OK);
}
arg = arg->common.next;
for (i = 0; arg && (i < element_count); i++) {
if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
-
- /* This package element is already built, just get it */
-
- obj_desc->package.elements[i] =
- ACPI_CAST_PTR(union acpi_operand_object,
- arg->common.node);
+ if (arg->common.node->type == ACPI_TYPE_METHOD) {
+ /*
+ * A method reference "looks" to the parser to be a method
+ * invocation, so we special case it here
+ */
+ arg->common.aml_opcode = AML_INT_NAMEPATH_OP;
+ status =
+ acpi_ds_build_internal_object(walk_state,
+ arg,
+ &obj_desc->
+ package.
+ elements[i]);
+ } else {
+ /* This package element is already built, just get it */
+
+ obj_desc->package.elements[i] =
+ ACPI_CAST_PTR(union acpi_operand_object,
+ arg->common.node);
+ }
} else {
status = acpi_ds_build_internal_object(walk_state, arg,
&obj_desc->
#undef PREFIX
#define PREFIX "ACPI: EC: "
+/* Uncomment next line to get verbose print outs*/
+/* #define DEBUG */
+
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */
EC_FLAGS_QUERY_PENDING, /* Query is pending */
EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */
- EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */
+ EC_FLAGS_NO_ADDRESS_GPE, /* Expect GPE only for non-address event */
+ EC_FLAGS_ADDRESS, /* Address is being written */
+ EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */
+ EC_FLAGS_WDATA, /* Data is being written */
};
static int acpi_ec_remove(struct acpi_device *device, int type);
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
- return inb(ec->command_addr);
+ u8 x = inb(ec->command_addr);
+ pr_debug(PREFIX "---> status = 0x%2x\n", x);
+ return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
+ u8 x = inb(ec->data_addr);
+ pr_debug(PREFIX "---> data = 0x%2x\n", x);
return inb(ec->data_addr);
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
+ pr_debug(PREFIX "<--- command = 0x%2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
+ pr_debug(PREFIX "<--- data = 0x%2x\n", data);
outb(data, ec->data_addr);
}
static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
+ int ret = 0;
+ if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) &&
+ test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags)))
+ force_poll = 1;
+ if (unlikely(test_bit(EC_FLAGS_WDATA, &ec->flags) &&
+ test_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags)))
+ force_poll = 1;
if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
likely(!force_poll)) {
if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
msecs_to_jiffies(ACPI_EC_DELAY)))
- return 0;
+ goto end;
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (acpi_ec_check_status(ec, event)) {
- if (event == ACPI_EC_EVENT_OBF_1) {
- /* miss OBF = 1 GPE, don't expect it anymore */
- printk(KERN_INFO PREFIX "missing OBF_1 confirmation,"
- "switching to degraded mode.\n");
- set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
+ if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
+ /* miss address GPE, don't expect it anymore */
+ pr_info(PREFIX "missing address confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags);
+ } else if (test_bit(EC_FLAGS_WDATA, &ec->flags)) {
+ /* miss write data GPE, don't expect it */
+ pr_info(PREFIX "missing write data confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags);
} else {
/* missing GPEs, switch back to poll mode */
- printk(KERN_INFO PREFIX "missing IBF_1 confirmations,"
- "switch off interrupt mode.\n");
+ if (printk_ratelimit())
+ pr_info(PREFIX "missing confirmations, "
+ "switch off interrupt mode.\n");
clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
- return 0;
+ goto end;
}
} else {
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
- return 0;
+ goto end;
}
}
- printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+ pr_err(PREFIX "acpi_ec_wait timeout,"
" status = %d, expect_event = %d\n",
acpi_ec_read_status(ec), event);
- return -ETIME;
+ ret = -ETIME;
+ end:
+ clear_bit(EC_FLAGS_ADDRESS, &ec->flags);
+ return ret;
}
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
int result = 0;
set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_cmd(ec, command);
-
+ pr_debug(PREFIX "transaction start\n");
for (; wdata_len > 0; --wdata_len) {
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
- printk(KERN_ERR PREFIX
+ pr_err(PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
+ /* mark the address byte written to EC */
+ if (rdata_len + wdata_len > 1)
+ set_bit(EC_FLAGS_ADDRESS, &ec->flags);
set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
+ set_bit(EC_FLAGS_WDATA, &ec->flags);
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
- printk(KERN_ERR PREFIX
+ pr_err(PREFIX
"finish-write timeout, command = %d\n", command);
goto end;
}
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
for (; rdata_len > 0; --rdata_len) {
- if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags))
- force_poll = 1;
result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
if (result) {
- printk(KERN_ERR PREFIX "read timeout, command = %d\n",
- command);
+ pr_err(PREFIX "read timeout, command = %d\n", command);
goto end;
}
/* Don't expect GPE after last read */
*(rdata++) = acpi_ec_read_data(ec);
}
end:
+ pr_debug(PREFIX "transaction end\n");
return result;
}
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
if (status) {
- printk(KERN_ERR PREFIX
- "input buffer is not empty, aborting transaction\n");
+ pr_err(PREFIX "input buffer is not empty, "
+ "aborting transaction\n");
goto end;
}
acpi_status status = AE_OK;
struct acpi_ec *ec = data;
+ pr_debug(PREFIX "~~~> interrupt\n");
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
acpi_ec_gpe_query, ec);
} else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
/* this is non-query, must be confirmation */
- printk(KERN_INFO PREFIX "non-query interrupt received,"
- " switching to interrupt mode\n");
+ if (printk_ratelimit())
+ pr_info(PREFIX "non-query interrupt received,"
+ " switching to interrupt mode\n");
set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
{
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
- printk(KERN_ERR PREFIX "failed to remove space handler\n");
+ pr_err(PREFIX "failed to remove space handler\n");
if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
&acpi_ec_gpe_handler)))
- printk(KERN_ERR PREFIX "failed to remove gpe handler\n");
+ pr_err(PREFIX "failed to remove gpe handler\n");
ec->handlers_installed = 0;
}
first_ec = ec;
acpi_driver_data(device) = ec;
acpi_ec_add_fs(device);
- printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
+ pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
- printk(KERN_INFO PREFIX "driver started in %s mode\n",
+ pr_info(PREFIX "driver started in %s mode\n",
(test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
return 0;
}
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
- printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
+ pr_info(PREFIX "EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
} else {
+ /* This workaround is needed only on some broken machines,
+ * which require early EC, but fail to provide ECDT */
+ acpi_handle x;
printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
boot_ec, NULL);
/* Check that acpi_get_devices actually find something */
if (ACPI_FAILURE(status) || !boot_ec->handle)
goto error;
+ /* We really need to limit this workaround, the only ASUS,
+ * which needs it, has fake EC._INI method, so use it as flag.
+ */
+ if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
+ goto error;
}
ret = ec_install_handlers(boot_ec);
static nodemask_t nodes_found_map = NODE_MASK_NONE;
/* maps to convert between proximity domain and logical node ID */
-static int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS]
+static int pxm_to_node_map[MAX_PXM_DOMAINS]
= { [0 ... MAX_PXM_DOMAINS - 1] = NID_INVAL };
-static int __cpuinitdata node_to_pxm_map[MAX_NUMNODES]
+static int node_to_pxm_map[MAX_NUMNODES]
= { [0 ... MAX_NUMNODES - 1] = PXM_INVAL };
int pxm_to_node(int pxm)
if (!value)
value = &dummy;
- switch (width) {
- case 8:
+ *value = 0;
+ if (width <= 8) {
*(u8 *) value = inb(port);
- break;
- case 16:
+ } else if (width <= 16) {
*(u16 *) value = inw(port);
- break;
- case 32:
+ } else if (width <= 32) {
*(u32 *) value = inl(port);
- break;
- default:
+ } else {
BUG();
}
acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width)
{
- switch (width) {
- case 8:
+ if (width <= 8) {
outb(value, port);
- break;
- case 16:
+ } else if (width <= 16) {
outw(value, port);
- break;
- case 32:
+ } else if (width <= 32) {
outl(value, port);
- break;
- default:
+ } else {
BUG();
}
if (apic_id == -1)
return apic_id;
- for (i = 0; i < NR_CPUS; ++i) {
+ for_each_possible_cpu(i) {
if (cpu_physical_id(i) == apic_id)
return i;
}
request_region(pr->throttling.address, 6, "ACPI CPU throttle");
}
-#ifdef CONFIG_CPU_FREQ
- acpi_processor_ppc_has_changed(pr);
-#endif
- acpi_processor_get_throttling_info(pr);
- acpi_processor_get_limit_info(pr);
-
return 0;
}
return 0;
}
- BUG_ON((pr->id >= NR_CPUS) || (pr->id < 0));
+ BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
/*
* Buggy BIOS check
*/
if (processor_device_array[pr->id] != NULL &&
processor_device_array[pr->id] != device) {
- printk(KERN_WARNING "BIOS reported wrong ACPI id"
+ printk(KERN_WARNING "BIOS reported wrong ACPI id "
"for the processor\n");
return -ENODEV;
}
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
+#ifdef CONFIG_CPU_FREQ
+ acpi_processor_ppc_has_changed(pr);
+#endif
+ acpi_processor_get_throttling_info(pr);
+ acpi_processor_get_limit_info(pr);
+
acpi_processor_power_init(pr, device);
{
struct acpi_processor *pr = data;
struct acpi_device *device = NULL;
-
+ int saved;
if (!pr)
return;
switch (event) {
case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
+ saved = pr->performance_platform_limit;
acpi_processor_ppc_has_changed(pr);
+ if (saved == pr->performance_platform_limit)
+ break;
acpi_bus_generate_proc_event(device, event,
pr->performance_platform_limit);
acpi_bus_generate_netlink_event(device->pnp.device_class,
pr = acpi_driver_data(device);
- if (pr->id >= NR_CPUS) {
+ if (pr->id >= nr_cpu_ids) {
kfree(pr);
return 0;
}
if (!pr)
return -ENODEV;
- if ((pr->id >= 0) && (pr->id < NR_CPUS)) {
+ if ((pr->id >= 0) && (pr->id < nr_cpu_ids)) {
kobject_uevent(&(*device)->dev.kobj, KOBJ_ONLINE);
}
return 0;
break;
}
- if (pr->id >= 0 && (pr->id < NR_CPUS)) {
+ if (pr->id >= 0 && (pr->id < nr_cpu_ids)) {
kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
break;
}
result = acpi_processor_start(device);
- if ((!result) && ((pr->id >= 0) && (pr->id < NR_CPUS))) {
+ if ((!result) && ((pr->id >= 0) && (pr->id < nr_cpu_ids))) {
kobject_uevent(&device->dev.kobj, KOBJ_ONLINE);
} else {
printk(KERN_ERR PREFIX "Device [%s] failed to start\n",
return;
}
- if ((pr->id < NR_CPUS) && (cpu_present(pr->id)))
+ if ((pr->id < nr_cpu_ids) && (cpu_present(pr->id)))
kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
break;
default:
return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
}
+static void acpi_safe_halt(void)
+{
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
+ if (!need_resched())
+ safe_halt();
+ current_thread_info()->status |= TS_POLLING;
+}
+
#ifndef CONFIG_CPU_IDLE
static void
return;
}
-static void acpi_safe_halt(void)
-{
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we
- * test NEED_RESCHED:
- */
- smp_mb();
- if (!need_resched())
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
-}
-
static atomic_t c3_cpu_count;
/* Common C-state entry for C2, C3, .. */
break;
case ACPI_STATE_C3:
+ /*
+ * Must be done before busmaster disable as we might
+ * need to access HPET !
+ */
+ acpi_state_timer_broadcast(pr, cx, 1);
/*
* disable bus master
* bm_check implies we need ARB_DIS
/* Get start time (ticks) */
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C3 */
- acpi_state_timer_broadcast(pr, cx, 1);
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
acpi_cstate_enter(cx);
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we test
- * NEED_RESCHED:
- */
- smp_mb();
- if (!need_resched())
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
+ acpi_safe_halt();
cx->usage++;
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
u32 t1, t2;
+ int sleep_ticks = 0;
+
pr = processors[smp_processor_id()];
if (unlikely(!pr))
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
- if (pr->flags.bm_check)
- acpi_idle_update_bm_rld(pr, cx);
-
local_irq_disable();
current_thread_info()->status &= ~TS_POLLING;
/*
return 0;
}
+ /*
+ * Must be done before busmaster disable as we might need to
+ * access HPET !
+ */
+ acpi_state_timer_broadcast(pr, cx, 1);
+
+ if (pr->flags.bm_check)
+ acpi_idle_update_bm_rld(pr, cx);
+
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
- acpi_state_timer_broadcast(pr, cx, 1);
+ /* Tell the scheduler that we are going deep-idle: */
+ sched_clock_idle_sleep_event();
acpi_idle_do_entry(cx);
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* TSC could halt in idle, so notify users */
mark_tsc_unstable("TSC halts in idle");;
#endif
+ sleep_ticks = ticks_elapsed(t1, t2);
+
+ /* Tell the scheduler how much we idled: */
+ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
cx->usage++;
acpi_state_timer_broadcast(pr, cx, 0);
- cx->time += ticks_elapsed(t1, t2);
+ cx->time += sleep_ticks;
return ticks_elapsed_in_us(t1, t2);
}
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
u32 t1, t2;
+ int sleep_ticks = 0;
+
pr = processors[smp_processor_id()];
if (unlikely(!pr))
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
+ if (acpi_idle_bm_check()) {
+ if (dev->safe_state) {
+ return dev->safe_state->enter(dev, dev->safe_state);
+ } else {
+ acpi_safe_halt();
+ return 0;
+ }
+ }
+
local_irq_disable();
current_thread_info()->status &= ~TS_POLLING;
/*
return 0;
}
+ /* Tell the scheduler that we are going deep-idle: */
+ sched_clock_idle_sleep_event();
/*
* Must be done before busmaster disable as we might need to
* access HPET !
*/
acpi_state_timer_broadcast(pr, cx, 1);
- if (acpi_idle_bm_check()) {
- cx = pr->power.bm_state;
-
- acpi_idle_update_bm_rld(pr, cx);
-
- t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
- acpi_idle_do_entry(cx);
- t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
- } else {
- acpi_idle_update_bm_rld(pr, cx);
+ acpi_idle_update_bm_rld(pr, cx);
+ /*
+ * disable bus master
+ * bm_check implies we need ARB_DIS
+ * !bm_check implies we need cache flush
+ * bm_control implies whether we can do ARB_DIS
+ *
+ * That leaves a case where bm_check is set and bm_control is
+ * not set. In that case we cannot do much, we enter C3
+ * without doing anything.
+ */
+ if (pr->flags.bm_check && pr->flags.bm_control) {
spin_lock(&c3_lock);
c3_cpu_count++;
/* Disable bus master arbitration when all CPUs are in C3 */
if (c3_cpu_count == num_online_cpus())
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
spin_unlock(&c3_lock);
+ } else if (!pr->flags.bm_check) {
+ ACPI_FLUSH_CPU_CACHE();
+ }
- t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
- acpi_idle_do_entry(cx);
- t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ acpi_idle_do_entry(cx);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ /* Re-enable bus master arbitration */
+ if (pr->flags.bm_check && pr->flags.bm_control) {
spin_lock(&c3_lock);
- /* Re-enable bus master arbitration */
- if (c3_cpu_count == num_online_cpus())
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
c3_cpu_count--;
spin_unlock(&c3_lock);
}
/* TSC could halt in idle, so notify users */
mark_tsc_unstable("TSC halts in idle");
#endif
+ sleep_ticks = ticks_elapsed(t1, t2);
+ /* Tell the scheduler how much we idled: */
+ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
cx->usage++;
acpi_state_timer_broadcast(pr, cx, 0);
- cx->time += ticks_elapsed(t1, t2);
+ cx->time += sleep_ticks;
return ticks_elapsed_in_us(t1, t2);
}
case ACPI_STATE_C1:
state->flags |= CPUIDLE_FLAG_SHALLOW;
state->enter = acpi_idle_enter_c1;
+ dev->safe_state = state;
break;
case ACPI_STATE_C2:
state->flags |= CPUIDLE_FLAG_BALANCED;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_simple;
+ dev->safe_state = state;
break;
case ACPI_STATE_C3:
if (!count)
return -EINVAL;
- /* find the deepest state that can handle active BM */
- if (pr->flags.bm_check) {
- for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++)
- if (pr->power.states[i].type == ACPI_STATE_C3)
- break;
- pr->power.bm_state = &pr->power.states[i-1];
- }
-
return 0;
}
if (!first_run) {
dmi_check_system(processor_power_dmi_table);
+ max_cstate = acpi_processor_cstate_check(max_cstate);
if (max_cstate < ACPI_C_STATES_MAX)
printk(KERN_NOTICE
"ACPI: processor limited to max C-state %d\n",
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
{
- return acpi_processor_get_platform_limit(pr);
+ int result = 0;
+ int throttling_limit;
+ int current_state;
+ struct acpi_processor_limit *limit;
+ int target_state;
+
+ result = acpi_processor_get_platform_limit(pr);
+ if (result) {
+ /* Throttling Limit is unsupported */
+ return result;
+ }
+
+ throttling_limit = pr->throttling_platform_limit;
+ if (throttling_limit >= pr->throttling.state_count) {
+ /* Uncorrect Throttling Limit */
+ return -EINVAL;
+ }
+
+ current_state = pr->throttling.state;
+ if (current_state > throttling_limit) {
+ /*
+ * The current state can meet the requirement of
+ * _TPC limit. But it is reasonable that OSPM changes
+ * t-states from high to low for better performance.
+ * Of course the limit condition of thermal
+ * and user should be considered.
+ */
+ limit = &pr->limit;
+ target_state = throttling_limit;
+ if (limit->thermal.tx > target_state)
+ target_state = limit->thermal.tx;
+ if (limit->user.tx > target_state)
+ target_state = limit->user.tx;
+ } else if (current_state == throttling_limit) {
+ /*
+ * Unnecessary to change the throttling state
+ */
+ return 0;
+ } else {
+ /*
+ * If the current state is lower than the limit of _TPC, it
+ * will be forced to switch to the throttling state defined
+ * by throttling_platfor_limit.
+ * Because the previous state meets with the limit condition
+ * of thermal and user, it is unnecessary to check it again.
+ */
+ target_state = throttling_limit;
+ }
+ return acpi_processor_set_throttling(pr, target_state);
}
/*
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *ptc = NULL;
union acpi_object obj = { 0 };
+ struct acpi_processor_throttling *throttling;
status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer);
if (ACPI_FAILURE(status)) {
memcpy(&pr->throttling.status_register, obj.buffer.pointer,
sizeof(struct acpi_ptc_register));
+ throttling = &pr->throttling;
+
+ if ((throttling->control_register.bit_width +
+ throttling->control_register.bit_offset) > 32) {
+ printk(KERN_ERR PREFIX "Invalid _PTC control register\n");
+ result = -EFAULT;
+ goto end;
+ }
+
+ if ((throttling->status_register.bit_width +
+ throttling->status_register.bit_offset) > 32) {
+ printk(KERN_ERR PREFIX "Invalid _PTC status register\n");
+ result = -EFAULT;
+ goto end;
+ }
+
end:
kfree(buffer.pointer);
return 0;
}
-static int acpi_read_throttling_status(struct acpi_processor_throttling
- *throttling)
+#ifdef CONFIG_X86
+static int acpi_throttling_rdmsr(struct acpi_processor *pr,
+ acpi_integer * value)
+{
+ struct cpuinfo_x86 *c;
+ u64 msr_high, msr_low;
+ unsigned int cpu;
+ u64 msr = 0;
+ int ret = -1;
+
+ cpu = pr->id;
+ c = &cpu_data(cpu);
+
+ if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+ !cpu_has(c, X86_FEATURE_ACPI)) {
+ printk(KERN_ERR PREFIX
+ "HARDWARE addr space,NOT supported yet\n");
+ } else {
+ msr_low = 0;
+ msr_high = 0;
+ rdmsr_safe(MSR_IA32_THERM_CONTROL,
+ (u32 *)&msr_low , (u32 *) &msr_high);
+ msr = (msr_high << 32) | msr_low;
+ *value = (acpi_integer) msr;
+ ret = 0;
+ }
+ return ret;
+}
+
+static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
{
- int value = -1;
+ struct cpuinfo_x86 *c;
+ unsigned int cpu;
+ int ret = -1;
+ u64 msr;
+
+ cpu = pr->id;
+ c = &cpu_data(cpu);
+
+ if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+ !cpu_has(c, X86_FEATURE_ACPI)) {
+ printk(KERN_ERR PREFIX
+ "HARDWARE addr space,NOT supported yet\n");
+ } else {
+ msr = value;
+ wrmsr_safe(MSR_IA32_THERM_CONTROL,
+ msr & 0xffffffff, msr >> 32);
+ ret = 0;
+ }
+ return ret;
+}
+#else
+static int acpi_throttling_rdmsr(struct acpi_processor *pr,
+ acpi_integer * value)
+{
+ printk(KERN_ERR PREFIX
+ "HARDWARE addr space,NOT supported yet\n");
+ return -1;
+}
+
+static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
+{
+ printk(KERN_ERR PREFIX
+ "HARDWARE addr space,NOT supported yet\n");
+ return -1;
+}
+#endif
+
+static int acpi_read_throttling_status(struct acpi_processor *pr,
+ acpi_integer *value)
+{
+ u32 bit_width, bit_offset;
+ u64 ptc_value;
+ u64 ptc_mask;
+ struct acpi_processor_throttling *throttling;
+ int ret = -1;
+
+ throttling = &pr->throttling;
switch (throttling->status_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
+ ptc_value = 0;
+ bit_width = throttling->status_register.bit_width;
+ bit_offset = throttling->status_register.bit_offset;
+
acpi_os_read_port((acpi_io_address) throttling->status_register.
- address, &value,
- (u32) throttling->status_register.bit_width *
- 8);
+ address, (u32 *) &ptc_value,
+ (u32) (bit_width + bit_offset));
+ ptc_mask = (1 << bit_width) - 1;
+ *value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask);
+ ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
- printk(KERN_ERR PREFIX
- "HARDWARE addr space,NOT supported yet\n");
+ ret = acpi_throttling_rdmsr(pr, value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
(u32) (throttling->status_register.space_id));
}
- return value;
+ return ret;
}
-static int acpi_write_throttling_state(struct acpi_processor_throttling
- *throttling, int value)
+static int acpi_write_throttling_state(struct acpi_processor *pr,
+ acpi_integer value)
{
+ u32 bit_width, bit_offset;
+ u64 ptc_value;
+ u64 ptc_mask;
+ struct acpi_processor_throttling *throttling;
int ret = -1;
+ throttling = &pr->throttling;
switch (throttling->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
+ bit_width = throttling->control_register.bit_width;
+ bit_offset = throttling->control_register.bit_offset;
+ ptc_mask = (1 << bit_width) - 1;
+ ptc_value = value & ptc_mask;
+
acpi_os_write_port((acpi_io_address) throttling->
- control_register.address, value,
- (u32) throttling->control_register.
- bit_width * 8);
+ control_register.address,
+ (u32) (ptc_value << bit_offset),
+ (u32) (bit_width + bit_offset));
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
- printk(KERN_ERR PREFIX
- "HARDWARE addr space,NOT supported yet\n");
+ ret = acpi_throttling_wrmsr(pr, value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
return ret;
}
-static int acpi_get_throttling_state(struct acpi_processor *pr, int value)
+static int acpi_get_throttling_state(struct acpi_processor *pr,
+ acpi_integer value)
{
int i;
return i;
}
-static int acpi_get_throttling_value(struct acpi_processor *pr, int state)
+static int acpi_get_throttling_value(struct acpi_processor *pr,
+ int state, acpi_integer *value)
{
- int value = -1;
+ int ret = -1;
+
if (state >= 0 && state <= pr->throttling.state_count) {
struct acpi_processor_tx_tss *tx =
(struct acpi_processor_tx_tss *)&(pr->throttling.
states_tss[state]);
- value = tx->control;
+ *value = tx->control;
+ ret = 0;
}
- return value;
+ return ret;
}
static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
{
int state = 0;
- u32 value = 0;
+ int ret;
+ acpi_integer value;
if (!pr)
return -EINVAL;
return -ENODEV;
pr->throttling.state = 0;
- local_irq_disable();
- value = acpi_read_throttling_status(&pr->throttling);
- if (value >= 0) {
+
+ value = 0;
+ ret = acpi_read_throttling_status(pr, &value);
+ if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
pr->throttling.state = state;
}
- local_irq_enable();
return 0;
}
static int acpi_processor_get_throttling(struct acpi_processor *pr)
{
- return pr->throttling.acpi_processor_get_throttling(pr);
+ cpumask_t saved_mask;
+ int ret;
+
+ /*
+ * Migrate task to the cpu pointed by pr.
+ */
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(pr->id));
+ ret = pr->throttling.acpi_processor_get_throttling(pr);
+ /* restore the previous state */
+ set_cpus_allowed(current, saved_mask);
+
+ return ret;
+}
+
+static int acpi_processor_get_fadt_info(struct acpi_processor *pr)
+{
+ int i, step;
+
+ if (!pr->throttling.address) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
+ return -EINVAL;
+ } else if (!pr->throttling.duty_width) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n"));
+ return -EINVAL;
+ }
+ /* TBD: Support duty_cycle values that span bit 4. */
+ else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
+ printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n");
+ return -EINVAL;
+ }
+
+ pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width;
+
+ /*
+ * Compute state values. Note that throttling displays a linear power
+ * performance relationship (at 50% performance the CPU will consume
+ * 50% power). Values are in 1/10th of a percent to preserve accuracy.
+ */
+
+ step = (1000 / pr->throttling.state_count);
+
+ for (i = 0; i < pr->throttling.state_count; i++) {
+ pr->throttling.states[i].performance = 1000 - step * i;
+ pr->throttling.states[i].power = 1000 - step * i;
+ }
+ return 0;
}
static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
int state)
{
- u32 value = 0;
+ int ret;
+ acpi_integer value;
if (!pr)
return -EINVAL;
if (state < pr->throttling_platform_limit)
return -EPERM;
- local_irq_disable();
-
- value = acpi_get_throttling_value(pr, state);
- if (value >= 0) {
- acpi_write_throttling_state(&pr->throttling, value);
+ value = 0;
+ ret = acpi_get_throttling_value(pr, state, &value);
+ if (ret >= 0) {
+ acpi_write_throttling_state(pr, value);
pr->throttling.state = state;
}
- local_irq_enable();
return 0;
}
int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
{
- return pr->throttling.acpi_processor_set_throttling(pr, state);
+ cpumask_t saved_mask;
+ int ret;
+ /*
+ * Migrate task to the cpu pointed by pr.
+ */
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(pr->id));
+ ret = pr->throttling.acpi_processor_set_throttling(pr, state);
+ /* restore the previous state */
+ set_cpus_allowed(current, saved_mask);
+ return ret;
}
int acpi_processor_get_throttling_info(struct acpi_processor *pr)
{
int result = 0;
- int step = 0;
- int i = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
acpi_processor_get_throttling_states(pr) ||
acpi_processor_get_platform_limit(pr))
{
+ if (acpi_processor_get_fadt_info(pr))
+ return 0;
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_fadt;
pr->throttling.acpi_processor_set_throttling =
acpi_processor_get_tsd(pr);
- if (!pr->throttling.address) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
- return 0;
- } else if (!pr->throttling.duty_width) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n"));
- return 0;
- }
- /* TBD: Support duty_cycle values that span bit 4. */
- else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
- printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n");
- return 0;
- }
-
/*
* PIIX4 Errata: We don't support throttling on the original PIIX4.
* This shouldn't be an issue as few (if any) mobile systems ever
return 0;
}
- pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width;
-
- /*
- * Compute state values. Note that throttling displays a linear power/
- * performance relationship (at 50% performance the CPU will consume
- * 50% power). Values are in 1/10th of a percent to preserve accuracy.
- */
-
- step = (1000 / pr->throttling.state_count);
-
- for (i = 0; i < pr->throttling.state_count; i++) {
- pr->throttling.states[i].performance = step * i;
- pr->throttling.states[i].power = step * i;
- }
-
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n",
pr->throttling.state_count));
#include <linux/moduleparam.h>
#include <linux/kernel.h>
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
struct acpi_battery {
struct power_supply bat;
struct acpi_sbs *sbs;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
struct proc_dir_entry *proc_entry;
#endif
unsigned long update_time;
u16 spec;
u8 id;
u8 present:1;
+ u8 have_sysfs_alarm:1;
};
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
struct acpi_device *device;
struct acpi_smb_hc *hc;
struct mutex lock;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
struct proc_dir_entry *charger_entry;
#endif
struct acpi_battery battery[MAX_SBS_BAT];
FS Interface (/proc/acpi)
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
/* Generic Routines */
static int
acpi_sbs_add_fs(struct proc_dir_entry **dir,
return result;
sprintf(battery->name, ACPI_BATTERY_DIR_NAME, id);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_sbs_add_fs(&battery->proc_entry, acpi_battery_dir,
battery->name, &acpi_battery_info_fops,
&acpi_battery_state_fops, &acpi_battery_alarm_fops,
}
battery->bat.get_property = acpi_sbs_battery_get_property;
result = power_supply_register(&sbs->device->dev, &battery->bat);
- device_create_file(battery->bat.dev, &alarm_attr);
+ if (result)
+ goto end;
+ result = device_create_file(battery->bat.dev, &alarm_attr);
+ if (result)
+ goto end;
+ battery->have_sysfs_alarm = 1;
+ end:
printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
battery->name, sbs->battery->present ? "present" : "absent");
static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
{
- if (sbs->battery[id].bat.dev)
- device_remove_file(sbs->battery[id].bat.dev, &alarm_attr);
- power_supply_unregister(&sbs->battery[id].bat);
-#ifdef CONFIG_ACPI_PROCFS
- if (sbs->battery[id].proc_entry) {
- acpi_sbs_remove_fs(&(sbs->battery[id].proc_entry),
- acpi_battery_dir);
+ struct acpi_battery *battery = &sbs->battery[id];
+
+ if (battery->bat.dev) {
+ if (battery->have_sysfs_alarm)
+ device_remove_file(battery->bat.dev, &alarm_attr);
+ power_supply_unregister(&battery->bat);
}
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ if (battery->proc_entry)
+ acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
#endif
}
result = acpi_ac_get_present(sbs);
if (result)
goto end;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
result = acpi_sbs_add_fs(&sbs->charger_entry, acpi_ac_dir,
ACPI_AC_DIR_NAME, NULL,
&acpi_ac_state_fops, NULL, sbs);
{
if (sbs->charger.dev)
power_supply_unregister(&sbs->charger);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
if (sbs->charger_entry)
acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir);
#endif
static void acpi_sbs_rmdirs(void)
{
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
if (acpi_ac_dir) {
acpi_unlock_ac_dir(acpi_ac_dir);
acpi_ac_dir = NULL;
if (acpi_disabled)
return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_dir = acpi_lock_ac_dir();
if (!acpi_ac_dir)
return -ENODEV;
/* XSDT has NULL entry, RSDT is used */
address = rsdt_address;
table_entry_size = sizeof(u32);
- ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry,"
+ ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry, "
"using RSDT"));
}
}
#include <linux/init.h>
#include <linux/types.h>
#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/input.h>
u8 attached_count;
struct acpi_video_bus_cap cap;
struct acpi_video_bus_flags flags;
- struct semaphore sem;
struct list_head video_device_list;
+ struct mutex device_list_lock; /* protects video_device_list */
struct proc_dir_entry *dir;
struct input_dev *input;
char phys[32]; /* for input device */
struct acpi_video_device_brightness *br = NULL;
- memset(&device->cap, 0, 4);
+ memset(&device->cap, 0, sizeof(device->cap));
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) {
device->cap._ADR = 1;
{
acpi_handle h_dummy1;
- memset(&video->cap, 0, 4);
+ memset(&video->cap, 0, sizeof(video->cap));
if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) {
video->cap._DOS = 1;
}
{
struct seq_file *m = file->private_data;
struct acpi_video_device *dev = m->private;
- char str[4] = { 0 };
+ char str[5] = { 0 };
unsigned int level = 0;
int i;
return -ENODEV;
}
- down(&video->sem);
+ mutex_lock(&video->device_list_lock);
list_add_tail(&data->entry, &video->video_device_list);
- up(&video->sem);
+ mutex_unlock(&video->device_list_lock);
acpi_video_device_add_fs(device);
static void acpi_video_device_rebind(struct acpi_video_bus *video)
{
- struct list_head *node, *next;
- list_for_each_safe(node, next, &video->video_device_list) {
- struct acpi_video_device *dev =
- container_of(node, struct acpi_video_device, entry);
+ struct acpi_video_device *dev;
+
+ mutex_lock(&video->device_list_lock);
+
+ list_for_each_entry(dev, &video->video_device_list, entry)
acpi_video_device_bind(video, dev);
- }
+
+ mutex_unlock(&video->device_list_lock);
}
/*
static int acpi_video_switch_output(struct acpi_video_bus *video, int event)
{
- struct list_head *node, *next;
+ struct list_head *node;
struct acpi_video_device *dev = NULL;
struct acpi_video_device *dev_next = NULL;
struct acpi_video_device *dev_prev = NULL;
unsigned long state;
int status = 0;
+ mutex_lock(&video->device_list_lock);
- list_for_each_safe(node, next, &video->video_device_list) {
+ list_for_each(node, &video->video_device_list) {
dev = container_of(node, struct acpi_video_device, entry);
status = acpi_video_device_get_state(dev, &state);
if (state & 0x2) {
- dev_next =
- container_of(node->next, struct acpi_video_device,
- entry);
- dev_prev =
- container_of(node->prev, struct acpi_video_device,
- entry);
+ dev_next = container_of(node->next,
+ struct acpi_video_device, entry);
+ dev_prev = container_of(node->prev,
+ struct acpi_video_device, entry);
goto out;
}
}
+
dev_next = container_of(node->next, struct acpi_video_device, entry);
dev_prev = container_of(node->prev, struct acpi_video_device, entry);
- out:
+
+ out:
+ mutex_unlock(&video->device_list_lock);
+
switch (event) {
case ACPI_VIDEO_NOTIFY_CYCLE:
case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT:
struct acpi_device *device)
{
int status = 0;
- struct list_head *node, *next;
-
+ struct acpi_device *dev;
acpi_video_device_enumerate(video);
- list_for_each_safe(node, next, &device->children) {
- struct acpi_device *dev =
- list_entry(node, struct acpi_device, node);
-
- if (!dev)
- continue;
+ list_for_each_entry(dev, &device->children, node) {
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
continue;
}
-
}
return status;
}
video = device->video;
- down(&video->sem);
- list_del(&device->entry);
- up(&video->sem);
acpi_video_device_remove_fs(device->dev);
status = acpi_remove_notify_handler(device->dev->handle,
acpi_video_device_notify);
backlight_device_unregister(device->backlight);
video_output_unregister(device->output_dev);
+
return 0;
}
static int acpi_video_bus_put_devices(struct acpi_video_bus *video)
{
int status;
- struct list_head *node, *next;
+ struct acpi_video_device *dev, *next;
+ mutex_lock(&video->device_list_lock);
- list_for_each_safe(node, next, &video->video_device_list) {
- struct acpi_video_device *data =
- list_entry(node, struct acpi_video_device, entry);
- if (!data)
- continue;
+ list_for_each_entry_safe(dev, next, &video->video_device_list, entry) {
- status = acpi_video_bus_put_one_device(data);
+ status = acpi_video_bus_put_one_device(dev);
if (ACPI_FAILURE(status))
printk(KERN_WARNING PREFIX
"hhuuhhuu bug in acpi video driver.\n");
- if (data->brightness)
- kfree(data->brightness->levels);
- kfree(data->brightness);
- kfree(data);
+ if (dev->brightness) {
+ kfree(dev->brightness->levels);
+ kfree(dev->brightness);
+ }
+ list_del(&dev->entry);
+ kfree(dev);
}
+ mutex_unlock(&video->device_list_lock);
+
return 0;
}
struct input_dev *input;
int keycode;
-
- printk("video bus notify\n");
-
if (!video)
return;
static int instance;
static int acpi_video_bus_add(struct acpi_device *device)
{
- int result = 0;
- acpi_status status = 0;
- struct acpi_video_bus *video = NULL;
+ acpi_status status;
+ struct acpi_video_bus *video;
struct input_dev *input;
-
-
- if (!device)
- return -EINVAL;
+ int error;
video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
if (!video)
acpi_driver_data(device) = video;
acpi_video_bus_find_cap(video);
- result = acpi_video_bus_check(video);
- if (result)
- goto end;
+ error = acpi_video_bus_check(video);
+ if (error)
+ goto err_free_video;
- result = acpi_video_bus_add_fs(device);
- if (result)
- goto end;
+ error = acpi_video_bus_add_fs(device);
+ if (error)
+ goto err_free_video;
- init_MUTEX(&video->sem);
+ mutex_init(&video->device_list_lock);
INIT_LIST_HEAD(&video->video_device_list);
acpi_video_bus_get_devices(video, device);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Error installing notify handler\n"));
- acpi_video_bus_stop_devices(video);
- acpi_video_bus_put_devices(video);
- kfree(video->attached_array);
- acpi_video_bus_remove_fs(device);
- result = -ENODEV;
- goto end;
+ error = -ENODEV;
+ goto err_stop_video;
}
-
video->input = input = input_allocate_device();
+ if (!input) {
+ error = -ENOMEM;
+ goto err_uninstall_notify;
+ }
snprintf(video->phys, sizeof(video->phys),
"%s/video/input0", acpi_device_hid(video->device));
input->phys = video->phys;
input->id.bustype = BUS_HOST;
input->id.product = 0x06;
+ input->dev.parent = &device->dev;
input->evbit[0] = BIT(EV_KEY);
set_bit(KEY_SWITCHVIDEOMODE, input->keybit);
set_bit(KEY_VIDEO_NEXT, input->keybit);
set_bit(KEY_BRIGHTNESS_ZERO, input->keybit);
set_bit(KEY_DISPLAY_OFF, input->keybit);
set_bit(KEY_UNKNOWN, input->keybit);
- result = input_register_device(input);
- if (result) {
- acpi_remove_notify_handler(video->device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify);
- acpi_video_bus_stop_devices(video);
- acpi_video_bus_put_devices(video);
- kfree(video->attached_array);
- acpi_video_bus_remove_fs(device);
- goto end;
- }
+ error = input_register_device(input);
+ if (error)
+ goto err_free_input_dev;
printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n",
ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
video->flags.rom ? "yes" : "no",
video->flags.post ? "yes" : "no");
- end:
- if (result)
- kfree(video);
+ return 0;
+
+ err_free_input_dev:
+ input_free_device(input);
+ err_uninstall_notify:
+ acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
+ acpi_video_bus_notify);
+ err_stop_video:
+ acpi_video_bus_stop_devices(video);
+ acpi_video_bus_put_devices(video);
+ kfree(video->attached_array);
+ acpi_video_bus_remove_fs(device);
+ err_free_video:
+ kfree(video);
+ acpi_driver_data(device) = NULL;
- return result;
+ return error;
}
static int acpi_video_bus_remove(struct acpi_device *device, int type)
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
ATA_FLAG_IPM,
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
+
+ ICH_MAP = 0x90, /* ICH MAP register */
};
struct ahci_cmd_hdr {
{ PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
/* prepare for SRST (AHCI-1.1 10.4.1) */
rc = ahci_kick_engine(ap, 1);
- if (rc)
+ if (rc && rc != -EOPNOTSUPP)
ata_link_printk(link, KERN_WARNING,
- "failed to reset engine (errno=%d)", rc);
+ "failed to reset engine (errno=%d)\n", rc);
ata_tf_init(link->device, &tf);
struct ahci_host_priv *hpriv = ap->host->private_data;
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
u32 status, qc_active;
- int rc, known_irq = 0;
+ int rc;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
rc = ata_qc_complete_multiple(ap, qc_active, NULL);
- /* If resetting, spurious or invalid completions are expected,
- * return unconditionally.
- */
- if (resetting)
- return;
-
- if (rc > 0)
- return;
- if (rc < 0) {
+ /* while resetting, invalid completions are expected */
+ if (unlikely(rc < 0 && !resetting)) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
- return;
}
-
- /* hmmm... a spurious interrupt */
-
- /* if !NCQ, ignore. No modern ATA device has broken HSM
- * implementation for non-NCQ commands.
- */
- if (!ap->link.sactive)
- return;
-
- if (status & PORT_IRQ_D2H_REG_FIS) {
- if (!pp->ncq_saw_d2h)
- ata_port_printk(ap, KERN_INFO,
- "D2H reg with I during NCQ, "
- "this message won't be printed again\n");
- pp->ncq_saw_d2h = 1;
- known_irq = 1;
- }
-
- if (status & PORT_IRQ_DMAS_FIS) {
- if (!pp->ncq_saw_dmas)
- ata_port_printk(ap, KERN_INFO,
- "DMAS FIS during NCQ, "
- "this message won't be printed again\n");
- pp->ncq_saw_dmas = 1;
- known_irq = 1;
- }
-
- if (status & PORT_IRQ_SDB_FIS) {
- const __le32 *f = pp->rx_fis + RX_FIS_SDB;
-
- if (le32_to_cpu(f[1])) {
- /* SDB FIS containing spurious completions
- * might be dangerous, whine and fail commands
- * with HSM violation. EH will turn off NCQ
- * after several such failures.
- */
- ata_ehi_push_desc(ehi,
- "spurious completions during NCQ "
- "issue=0x%x SAct=0x%x FIS=%08x:%08x",
- readl(port_mmio + PORT_CMD_ISSUE),
- readl(port_mmio + PORT_SCR_ACT),
- le32_to_cpu(f[0]), le32_to_cpu(f[1]));
- ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
- ata_port_freeze(ap);
- } else {
- if (!pp->ncq_saw_sdb)
- ata_port_printk(ap, KERN_INFO,
- "spurious SDB FIS %08x:%08x during NCQ, "
- "this message won't be printed again\n",
- le32_to_cpu(f[0]), le32_to_cpu(f[1]));
- pp->ncq_saw_sdb = 1;
- }
- known_irq = 1;
- }
-
- if (!known_irq)
- ata_port_printk(ap, KERN_INFO, "spurious interrupt "
- "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
- status, ap->link.active_tag, ap->link.sactive);
}
static void ahci_irq_clear(struct ata_port *ap)
if (rc)
return rc;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
+ u8 map;
+
+ /* ICH6s share the same PCI ID for both piix and ahci
+ * modes. Enabling ahci mode while MAP indicates
+ * combined mode is a bad idea. Yield to ata_piix.
+ */
+ pci_read_config_byte(pdev, ICH_MAP, &map);
+ if (map & 0x3) {
+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
+ "combined mode, can't enable AHCI mode\n");
+ return -ENODEV;
+ }
+ }
+
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
PIIX_80C_SEC = (1 << 7) | (1 << 6),
/* controller IDs */
- piix_pata_33 = 0, /* PIIX4 at 33Mhz */
- ich_pata_33 = 1, /* ICH up to UDMA 33 only */
- ich_pata_66 = 2, /* ICH up to 66 Mhz */
- ich_pata_100 = 3, /* ICH up to UDMA 100 */
- ich5_sata = 5,
- ich6_sata = 6,
- ich6_sata_ahci = 7,
- ich6m_sata_ahci = 8,
- ich8_sata_ahci = 9,
- piix_pata_mwdma = 10, /* PIIX3 MWDMA only */
- tolapai_sata_ahci = 11,
- ich9_2port_sata = 12,
+ piix_pata_mwdma = 0, /* PIIX3 MWDMA only */
+ piix_pata_33, /* PIIX4 at 33Mhz */
+ ich_pata_33, /* ICH up to UDMA 33 only */
+ ich_pata_66, /* ICH up to 66 Mhz */
+ ich_pata_100, /* ICH up to UDMA 100 */
+ ich5_sata,
+ ich6_sata,
+ ich6_sata_ahci,
+ ich6m_sata_ahci,
+ ich8_sata_ahci,
+ ich8_2port_sata,
+ ich8m_apple_sata_ahci, /* locks up on second port enable */
+ tolapai_sata_ahci,
/* constants for mapping table */
P0 = 0, /* port 0 */
/* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller 2 IDE (ICH8) */
- { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* Mobile SATA Controller IDE (ICH8M), Apple */
+ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (Tolapai) */
static const struct piix_map_db ich8_map_db = {
.mask = 0x3,
- .port_enable = 0x3,
+ .port_enable = 0xf,
.map = {
/* PM PS SM SS MAP */
{ P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
},
};
-static const struct piix_map_db tolapai_map_db = {
+static const struct piix_map_db ich8_2port_map_db = {
.mask = 0x3,
.port_enable = 0x3,
.map = {
},
};
-static const struct piix_map_db ich9_2port_map_db = {
+static const struct piix_map_db ich8m_apple_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x1,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, NA, NA }, /* 00b */
+ { RV, RV, RV, RV },
+ { P0, P2, IDE, IDE }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
+static const struct piix_map_db tolapai_map_db = {
.mask = 0x3,
.port_enable = 0x3,
.map = {
[ich6_sata_ahci] = &ich6_map_db,
[ich6m_sata_ahci] = &ich6m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
+ [ich8_2port_sata] = &ich8_2port_map_db,
+ [ich8m_apple_sata_ahci] = &ich8m_apple_map_db,
[tolapai_sata_ahci] = &tolapai_map_db,
- [ich9_2port_sata] = &ich9_2port_map_db,
};
static struct ata_port_info piix_port_info[] = {
+ [piix_pata_mwdma] = /* PIIX3 MWDMA only */
+ {
+ .sht = &piix_sht,
+ .flags = PIIX_PATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+ .port_ops = &piix_pata_ops,
+ },
+
[piix_pata_33] = /* PIIX4 at 33MHz */
{
.sht = &piix_sht,
.port_ops = &piix_sata_ops,
},
- [piix_pata_mwdma] = /* PIIX3 MWDMA only */
+ [ich8_2port_sata] =
{
.sht = &piix_sht,
- .flags = PIIX_PATA_FLAGS,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
- .port_ops = &piix_pata_ops,
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
},
[tolapai_sata_ahci] =
.port_ops = &piix_sata_ops,
},
- [ich9_2port_sata] =
+ [ich8m_apple_sata_ahci] =
{
.sht = &piix_sht,
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
+
};
static struct pci_bits piix_enable_bits[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
},
},
+ {
+ .ident = "TECRA M3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M3"),
+ },
+ },
+ {
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
+ },
+ },
{
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"),
},
},
+ {
+ .ident = "TECRA A8",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A8"),
+ },
+ },
+ {
+ .ident = "Satellite R25",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R25"),
+ },
+ },
{
.ident = "Satellite U200",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
},
},
+ {
+ .ident = "Satellite U200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U200"),
+ },
+ },
{
.ident = "Satellite Pro U200",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
},
},
+ {
+ .ident = "SATELLITE U205",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"),
+ },
+ },
{
.ident = "Portege M500",
.matches = {
if (!mmio)
return -ENOMEM;
- tmp = readl(mmio + AHCI_GLOBAL_CTL);
+ tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
if (tmp & AHCI_ENABLE) {
tmp &= ~AHCI_ENABLE;
- writel(tmp, mmio + AHCI_GLOBAL_CTL);
+ iowrite32(tmp, mmio + AHCI_GLOBAL_CTL);
- tmp = readl(mmio + AHCI_GLOBAL_CTL);
+ tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
if (tmp & AHCI_ENABLE)
rc = -EIO;
}
* Hardware documentation available from http://www.t13.org/ and
* http://www.sata-io.org/
*
+ * Standards documents from:
+ * http://www.t13.org (ATA standards, PCI DMA IDE spec)
+ * http://www.t10.org (SCSI MMC - for ATAPI MMC)
+ * http://www.sata-io.org (SATA)
+ * http://www.compactflash.org (CF)
+ * http://www.qic.org (QIC157 - Tape and DSC)
+ * http://www.ce-ata.org (CE-ATA: not supported)
+ *
*/
#include <linux/kernel.h>
}
if ((dev->class == ATA_DEV_ATAPI) &&
- (atapi_command_packet_set(id) == TYPE_TAPE))
+ (atapi_command_packet_set(id) == TYPE_TAPE)) {
dev->max_sectors = ATA_MAX_SECTORS_TAPE;
+ dev->horkage |= ATA_HORKAGE_STUCK_ERR;
+ }
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
}
}
-/**
- * __sata_phy_reset - Wake/reset a low-level SATA PHY
- * @ap: SATA port associated with target SATA PHY.
- *
- * This function issues commands to standard SATA Sxxx
- * PHY registers, to wake up the phy (and device), and
- * clear any reset condition.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- */
-void __sata_phy_reset(struct ata_port *ap)
-{
- struct ata_link *link = &ap->link;
- unsigned long timeout = jiffies + (HZ * 5);
- u32 sstatus;
-
- if (ap->flags & ATA_FLAG_SATA_RESET) {
- /* issue phy wake/reset */
- sata_scr_write_flush(link, SCR_CONTROL, 0x301);
- /* Couldn't find anything in SATA I/II specs, but
- * AHCI-1.1 10.4.2 says at least 1 ms. */
- mdelay(1);
- }
- /* phy wake/clear reset */
- sata_scr_write_flush(link, SCR_CONTROL, 0x300);
-
- /* wait for phy to become ready, if necessary */
- do {
- msleep(200);
- sata_scr_read(link, SCR_STATUS, &sstatus);
- if ((sstatus & 0xf) != 1)
- break;
- } while (time_before(jiffies, timeout));
-
- /* print link status */
- sata_print_link_status(link);
-
- /* TODO: phy layer with polling, timeouts, etc. */
- if (!ata_link_offline(link))
- ata_port_probe(ap);
- else
- ata_port_disable(ap);
-
- if (ap->flags & ATA_FLAG_DISABLED)
- return;
-
- if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
- ata_port_disable(ap);
- return;
- }
-
- ap->cbl = ATA_CBL_SATA;
-}
-
-/**
- * sata_phy_reset - Reset SATA bus.
- * @ap: SATA port associated with target SATA PHY.
- *
- * This function resets the SATA bus, and then probes
- * the bus for devices.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- */
-void sata_phy_reset(struct ata_port *ap)
-{
- __sata_phy_reset(ap);
- if (ap->flags & ATA_FLAG_DISABLED)
- return;
- ata_bus_reset(ap);
-}
-
/**
* ata_dev_pair - return other device on cable
* @adev: device
/* Devices where NCQ should be avoided */
/* NCQ is slow */
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
+ { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
/* NCQ is broken */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
- /* Drives which do spurious command completion */
- { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, },
- { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
- { "HDT722516DLA380", "V43OA96A", ATA_HORKAGE_NONCQ, },
- { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
- { "Hitachi HTS542525K9SA00", "BBFOC31P", ATA_HORKAGE_NONCQ, },
- { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
- { "WDC WD3200AAJS-00RYA0", "12.01B01", ATA_HORKAGE_NONCQ, },
- { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
- { "ST9120822AS", "3.CLF", ATA_HORKAGE_NONCQ, },
- { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
- { "ST9160821AS", "3.ALD", ATA_HORKAGE_NONCQ, },
- { "ST9160821AS", "3.CCD", ATA_HORKAGE_NONCQ, },
- { "ST3160812AS", "3.ADJ", ATA_HORKAGE_NONCQ, },
- { "ST980813AS", "3.ADB", ATA_HORKAGE_NONCQ, },
- { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
- { "Maxtor 7V300F0", "VA111900", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
/* Devices which get the IVB wrong */
{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, },
+ { "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, },
+ { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
+ { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, },
/* End Marker */
{ }
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
- "error, dev_stat 0x%X\n", status);
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
+ /* Some ATAPI tape drives forget to clear the ERR bit
+ * when doing the next command (mostly request sense).
+ * We ignore ERR here to workaround and proceed sending
+ * the CDB.
+ */
+ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X\n", status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
}
/* Send the CDB (atapi) or the first data block (ata pio out).
if (ap->ops->port_start) {
rc = ap->ops->port_start(ap);
if (rc) {
- ata_port_printk(ap, KERN_ERR, "failed to "
- "start port (errno=%d)\n", rc);
+ if (rc != -ENODEV)
+ dev_printk(KERN_ERR, host->dev, "failed to start port %d (errno=%d)\n", i, rc);
goto err_out;
}
}
-
ata_eh_freeze_port(ap);
}
EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(sata_phy_reset);
-EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(ata_std_softreset);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
EXPORT_SYMBOL_GPL(ata_link_abort);
EXPORT_SYMBOL_GPL(ata_port_abort);
}
}
-/**
- * ata_qc_timeout - Handle timeout of queued command
- * @qc: Command that timed out
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * TODO: kill this function once old EH is gone.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 host_stat = 0, drv_stat;
- unsigned long flags;
-
- DPRINTK("ENTER\n");
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- spin_lock_irqsave(ap->lock, flags);
-
- switch (qc->tf.protocol) {
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- host_stat = ap->ops->bmdma_status(ap);
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- /* fall through */
-
- default:
- ata_altstatus(ap);
- drv_stat = ata_chk_status(ap);
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, "
- "stat 0x%x host_stat 0x%x\n",
- qc->tf.command, drv_stat, host_stat);
-
- /* complete taskfile transaction */
- qc->err_mask |= AC_ERR_TIMEOUT;
- break;
- }
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_eh_qc_complete(qc);
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eng_timeout - Handle timeout of queued command
- * @ap: Port on which timed-out command is active
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * TODO: kill this function once old EH is gone.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-void ata_eng_timeout(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag));
-
- DPRINTK("EXIT\n");
-}
-
static int ata_eh_nr_in_flight(struct ata_port *ap)
{
unsigned int tag;
ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "");
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
- static const char *dma_str[] = {
- [DMA_BIDIRECTIONAL] = "bidi",
- [DMA_TO_DEVICE] = "out",
- [DMA_FROM_DEVICE] = "in",
- [DMA_NONE] = "",
- };
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
+ const u8 *cdb = qc->cdb;
+ char data_buf[20] = "";
+ char cdb_buf[70] = "";
if (!(qc->flags & ATA_QCFLAG_FAILED) ||
qc->dev->link != link || !qc->err_mask)
continue;
+ if (qc->dma_dir != DMA_NONE) {
+ static const char *dma_str[] = {
+ [DMA_BIDIRECTIONAL] = "bidi",
+ [DMA_TO_DEVICE] = "out",
+ [DMA_FROM_DEVICE] = "in",
+ };
+ static const char *prot_str[] = {
+ [ATA_PROT_PIO] = "pio",
+ [ATA_PROT_DMA] = "dma",
+ [ATA_PROT_NCQ] = "ncq",
+ [ATA_PROT_ATAPI] = "pio",
+ [ATA_PROT_ATAPI_DMA] = "dma",
+ };
+
+ snprintf(data_buf, sizeof(data_buf), " %s %u %s",
+ prot_str[qc->tf.protocol], qc->nbytes,
+ dma_str[qc->dma_dir]);
+ }
+
+ if (is_atapi_taskfile(&qc->tf))
+ snprintf(cdb_buf, sizeof(cdb_buf),
+ "cdb %02x %02x %02x %02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n ",
+ cdb[0], cdb[1], cdb[2], cdb[3],
+ cdb[4], cdb[5], cdb[6], cdb[7],
+ cdb[8], cdb[9], cdb[10], cdb[11],
+ cdb[12], cdb[13], cdb[14], cdb[15]);
+
ata_dev_printk(qc->dev, KERN_ERR,
"cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
- "tag %d cdb 0x%x data %u %s\n "
+ "tag %d%s\n %s"
"res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
"Emask 0x%x (%s)%s\n",
cmd->command, cmd->feature, cmd->nsect,
cmd->lbal, cmd->lbam, cmd->lbah,
cmd->hob_feature, cmd->hob_nsect,
cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah,
- cmd->device, qc->tag, qc->cdb[0], qc->nbytes,
- dma_str[qc->dma_dir],
+ cmd->device, qc->tag, data_buf, cdb_buf,
res->command, res->feature, res->nsect,
res->lbal, res->lbam, res->lbah,
res->hob_feature, res->hob_nsect,
if (!using_pio && ata_check_atapi_dma(qc))
using_pio = 1;
- /* Some controller variants snoop this value for Packet transfers
- to do state machine and FIFO management. Thus we want to set it
- properly, and for DMA where it is effectively meaningless */
+ /* Some controller variants snoop this value for Packet
+ * transfers to do state machine and FIFO management. Thus we
+ * want to set it properly, and for DMA where it is
+ * effectively meaningless.
+ */
nbytes = min(qc->nbytes, (unsigned int)63 * 1024);
+ /* Most ATAPI devices which honor transfer chunk size don't
+ * behave according to the spec when odd chunk size which
+ * matches the transfer length is specified. If the number of
+ * bytes to transfer is 2n+1. According to the spec, what
+ * should happen is to indicate that 2n+1 is going to be
+ * transferred and transfer 2n+2 bytes where the last byte is
+ * padding.
+ *
+ * In practice, this doesn't happen. ATAPI devices first
+ * indicate and transfer 2n bytes and then indicate and
+ * transfer 2 bytes where the last byte is padding.
+ *
+ * This inconsistency confuses several controllers which
+ * perform PIO using DMA such as Intel AHCIs and sil3124/32.
+ * These controllers use actual number of transferred bytes to
+ * update DMA poitner and transfer of 4n+2 bytes make those
+ * controller push DMA pointer by 4n+4 bytes because SATA data
+ * FISes are aligned to 4 bytes. This causes data corruption
+ * and buffer overrun.
+ *
+ * Always setting nbytes to even number solves this problem
+ * because then ATAPI devices don't have to split data at 2n
+ * boundaries.
+ */
+ if (nbytes & 0x1)
+ nbytes++;
+
qc->tf.lbam = (nbytes & 0xFF);
qc->tf.lbah = (nbytes >> 8);
xlat_func = NULL;
if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
/* relay SCSI command to ATAPI device */
- if (unlikely(scmd->cmd_len > dev->cdb_len))
+ int len = COMMAND_SIZE(scsi_op);
+ if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
goto bad_cdb_len;
xlat_func = atapi_xlat;
/* Fujitsu P2000 */
if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
return 1;
+ /* Mitac 8317 (Winbook-A) and relatives */
+ if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317)
+ return 1;
/* Systems by DMI */
if (dmi_check_system(cable_dmi_table))
return 1;
adev->max_sectors = 255;
}
+/**
+ * ali_check_atapi_dma - DMA check for most ALi controllers
+ * @adev: Device
+ *
+ * Called to decide whether commands should be sent by DMA or PIO
+ */
+
+static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ /* If its not a media command, its not worth it */
+ if (qc->nbytes < 2048)
+ return -EOPNOTSUPP;
+ return 0;
+}
+
static struct scsi_host_template ali_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
+ .check_atapi_dma = ali_check_atapi_dma,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
+ .check_atapi_dma = ali_check_atapi_dma,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.3.10"
/**
* timing_setup - shared timing computation and load
}
/* UDMA timing */
- pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
+ if (at.udma)
+ pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
}
/**
#include <asm/arch/smc.h>
#define DRV_NAME "pata_at32"
-#define DRV_VERSION "0.0.2"
+#define DRV_VERSION "0.0.3"
/*
* CompactFlash controller memory layout relative to the base address:
* Mode 2 | 8.3 | 240 ns | 0x07
* Mode 3 | 11.1 | 180 ns | 0x0f
* Mode 4 | 16.7 | 120 ns | 0x1f
+ *
+ * Alter PIO_MASK below according to table to set maximal PIO mode.
*/
#define PIO_MASK (0x1f)
*/
static int pata_at32_setup_timing(struct device *dev,
struct at32_ide_info *info,
- const struct ata_timing *timing)
+ const struct ata_timing *ata)
{
- /* These two values are found through testing */
- const int min_recover = 25;
- const int ncs_hold = 15;
-
struct smc_config *smc = &info->smc;
+ struct smc_timing timing;
int active;
int recover;
+ memset(&timing, 0, sizeof(struct smc_timing));
+
/* Total cycle time */
- smc->read_cycle = timing->cyc8b;
+ timing.read_cycle = ata->cyc8b;
/* DIOR <= CFIOR timings */
- smc->nrd_setup = timing->setup;
- smc->nrd_pulse = timing->act8b;
+ timing.nrd_setup = ata->setup;
+ timing.nrd_pulse = ata->act8b;
+ timing.nrd_recover = ata->rec8b;
+
+ /* Convert nanosecond timing to clock cycles */
+ smc_set_timing(smc, &timing);
- /* Compute recover, extend total cycle if needed */
- active = smc->nrd_setup + smc->nrd_pulse;
+ /* Add one extra cycle setup due to signal ring */
+ smc->nrd_setup = smc->nrd_setup + 1;
+
+ active = smc->nrd_setup + smc->nrd_pulse;
recover = smc->read_cycle - active;
- if (recover < min_recover) {
- smc->read_cycle = active + min_recover;
- recover = min_recover;
- }
+ /* Need at least two cycles recovery */
+ if (recover < 2)
+ smc->read_cycle = active + 2;
/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
- smc->ncs_read_setup = 0;
- smc->ncs_read_pulse = active + ncs_hold;
+ smc->ncs_read_setup = 1;
+ smc->ncs_read_pulse = smc->read_cycle - 2;
/* Write timings same as read timings */
smc->write_cycle = smc->read_cycle;
smc->ncs_write_setup = smc->ncs_read_setup;
smc->ncs_write_pulse = smc->ncs_read_pulse;
- /* Do some debugging output */
- dev_dbg(dev, "SMC: C=%d S=%d P=%d R=%d NCSS=%d NCSP=%d NCSR=%d\n",
+ /* Do some debugging output of ATA and SMC timings */
+ dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n",
+ ata->cyc8b, ata->setup, ata->act8b, ata->rec8b);
+
+ dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n",
smc->read_cycle, smc->nrd_setup, smc->nrd_pulse,
- recover, smc->ncs_read_setup, smc->ncs_read_pulse,
- smc->read_cycle - smc->ncs_read_pulse);
+ smc->ncs_read_setup, smc->ncs_read_pulse);
/* Finally, configure the SMC */
return smc_set_configuration(info->cs, smc);
};
static struct ata_port_operations at32_port_ops = {
- .port_disable = ata_port_disable,
.set_piomode = pata_at32_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.irq_clear = pata_at32_irq_clear,
.irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
.port_start = ata_sff_port_start,
};
/* Setup ATA bindings */
ap->ops = &at32_port_ops;
ap->pio_mask = PIO_MASK;
- ap->flags = ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS
- | ATA_FLAG_PIO_POLLING;
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS;
/*
* Since all 8-bit taskfile transfers has to go on the lower
info->smc.tdf_mode = 0; /* TDF optimization disabled */
info->smc.tdf_cycles = 0; /* No TDF wait cycles */
- /* Setup ATA timing */
+ /* Setup SMC to ATA timing */
ret = pata_at32_setup_timing(dev, info, &initial_timing);
if (ret)
goto err_setup_timing;
- /* Setup ATA addresses */
+ /* Map ATA address space */
ret = -ENOMEM;
info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16);
info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16);
pata_at32_debug_bus(dev, info);
#endif
- /* Register ATA device */
+ /* Setup and register ATA device */
ret = pata_at32_init_one(dev, info);
if (ret)
goto err_ata_device;
unsigned short int_status = ATAPI_GET_INT_STATUS(base);
if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON)) {
- host_stat = ATA_DMA_ACTIVE;
+ host_stat |= ATA_DMA_ACTIVE;
}
if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT)) {
- host_stat = ATA_DMA_INTR;
+ host_stat |= ATA_DMA_INTR;
}
if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT)) {
- host_stat = ATA_DMA_ERR;
+ host_stat |= ATA_DMA_ERR;
}
return host_stat;
int board_idx = 0;
struct resource *res;
struct ata_host *host;
+ unsigned int fsclk = get_sclk();
+ int udma_mode = 5;
const struct ata_port_info *ppi[] =
{ &bfin_port_info[board_idx], NULL };
if (res == NULL)
return -EINVAL;
+ while (bfin_port_info[board_idx].udma_mask>0 && udma_fsclk[udma_mode] > fsclk) {
+ udma_mode--;
+ bfin_port_info[board_idx].udma_mask >>= 1;
+ }
+
/*
* Now that that's out of the way, wire up the port..
*/
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);
- if (ata66 & (1 << ap->port_no))
+ if (ata66 & (2 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
struct ata_host *host;
struct ata_port *ap;
void __iomem *cmd_addr, *ctl_addr;
+ int irq = 0;
+ irq_handler_t handler = NULL;
if (pnp_port_valid(idev, 0) == 0)
return -ENODEV;
- /* FIXME: Should selected polled PIO here not fail */
- if (pnp_irq_valid(idev, 0) == 0)
- return -ENODEV;
+ if (pnp_irq_valid(idev, 0)) {
+ irq = pnp_irq(idev, 0);
+ handler = ata_interrupt;
+ }
/* allocate host */
host = ata_host_alloc(&idev->dev, 1);
(unsigned long long)pnp_port_start(idev, 1));
/* activate */
- return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0,
+ return ata_host_activate(host, irq, handler, 0,
&isapnp_sht);
}
* actually do our cable checking etc. Thankfully we don't need
* to do the plumbing for other cases.
*/
- switch (port_map[port])
- {
+ switch (port_map[port]) {
case PORT_PATA0:
- if (control & (1 << 5))
- return 0;
+ if ((control & (1 << 5)) == 0)
+ return -ENOENT;
if (control & (1 << 3)) /* 40/80 pin primary */
ap->cbl = ATA_CBL_PATA40;
else
case PORT_PATA1:
/* Bit 21 is set if the port is enabled */
if ((control5 & (1 << 21)) == 0)
- return 0;
+ return -ENOENT;
if (control5 & (1 << 19)) /* 40/80 pin secondary */
ap->cbl = ATA_CBL_PATA40;
else
#include <linux/libata.h>
#define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.7"
+#define DRV_VERSION "0.4.8"
#define SIL680_MMIO_BAR 5
return ATA_CBL_PATA40;
}
-/**
- * sil680_bus_reset - reset the SIL680 bus
- * @link: ATA link to reset
- * @deadline: deadline jiffies for the operation
- *
- * Perform the SIL680 housekeeping when doing an ATA bus reset
- */
-
-static int sil680_bus_reset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned long addr = sil680_selreg(ap, 0);
- u8 reset;
-
- pci_read_config_byte(pdev, addr, &reset);
- pci_write_config_byte(pdev, addr, reset | 0x03);
- udelay(25);
- pci_write_config_byte(pdev, addr, reset);
- return ata_std_softreset(link, classes, deadline);
-}
-
-static void sil680_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
-}
-
/**
* sil680_set_piomode - set initial PIO mode data
* @ap: ATA interface
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = sil680_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sil680_cable_detect,
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
+ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
#include <linux/dmi.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
}
/* Set UDMA unless device is not UDMA capable */
- if (udma_type) {
+ if (udma_type && t.udma) {
u8 cable80_status;
/* Get 80-wire cable detection bit */
MV_PCI_ERR_ATTRIBUTE = 0x1d48,
MV_PCI_ERR_COMMAND = 0x1d50,
- PCI_IRQ_CAUSE_OFS = 0x1d58,
- PCI_IRQ_MASK_OFS = 0x1d5c,
+ PCI_IRQ_CAUSE_OFS = 0x1d58,
+ PCI_IRQ_MASK_OFS = 0x1d5c,
PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
+ PCIE_IRQ_CAUSE_OFS = 0x1900,
+ PCIE_IRQ_MASK_OFS = 0x1910,
+ PCIE_UNMASK_ALL_IRQS = 0x70a, /* assorted bits */
+
HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
HC_MAIN_IRQ_MASK_OFS = 0x1d64,
PORT0_ERR = (1 << 0), /* shift by port # */
MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
+ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
u32 pre;
};
-struct mv_host_priv;
+struct mv_host_priv {
+ u32 hp_flags;
+ struct mv_port_signal signal[8];
+ const struct mv_hw_ops *ops;
+ u32 irq_cause_ofs;
+ u32 irq_mask_ofs;
+ u32 unmask_all_irqs;
+};
+
struct mv_hw_ops {
void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
};
-struct mv_host_priv {
- u32 hp_flags;
- struct mv_port_signal signal[8];
- const struct mv_hw_ops *ops;
-};
-
static void mv_irq_clear(struct ata_port *ap);
static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
/* Adaptec 1430SA */
{ PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
- { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
-
- /* add Marvell 7042 support */
+ /* Marvell 7042 support */
{ PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
+ /* Highpoint RocketRAID PCIe series */
+ { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
+ { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
+
{ } /* terminate list */
};
static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
{
+ struct mv_host_priv *hpriv = host->private_data;
struct ata_port *ap;
struct ata_queued_cmd *qc;
struct ata_eh_info *ehi;
unsigned int i, err_mask, printed = 0;
u32 err_cause;
- err_cause = readl(mmio + PCI_IRQ_CAUSE_OFS);
+ err_cause = readl(mmio + hpriv->irq_cause_ofs);
dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
err_cause);
DPRINTK("All regs @ PCI error\n");
mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
- writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
for (i = 0; i < host->n_ports; i++) {
ap = host->ports[i];
#define ZERO(reg) writel(0, mmio + (reg))
static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct mv_host_priv *hpriv = host->private_data;
u32 tmp;
tmp = readl(mmio + MV_PCI_MODE);
writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
ZERO(HC_MAIN_IRQ_MASK_OFS);
ZERO(MV_PCI_SERR_MASK);
- ZERO(PCI_IRQ_CAUSE_OFS);
- ZERO(PCI_IRQ_MASK_OFS);
+ ZERO(hpriv->irq_cause_ofs);
+ ZERO(hpriv->irq_mask_ofs);
ZERO(MV_PCI_ERR_LOW_ADDRESS);
ZERO(MV_PCI_ERR_HIGH_ADDRESS);
ZERO(MV_PCI_ERR_ATTRIBUTE);
mv_scr_read(ap, SCR_ERROR, &serror);
mv_scr_read(ap, SCR_CONTROL, &scontrol);
DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", status, serror, scontrol);
+ "SCtrl 0x%08x\n", sstatus, serror, scontrol);
}
#endif
break;
case chip_7042:
+ hp_flags |= MV_HP_PCIE;
+ if (pdev->vendor == PCI_VENDOR_ID_TTI &&
+ (pdev->device == 0x2300 || pdev->device == 0x2310))
+ {
+ printk(KERN_WARNING "sata_mv: Highpoint RocketRAID BIOS"
+ " will CORRUPT DATA on attached drives when"
+ " configured as \"Legacy\". BEWARE!\n");
+ printk(KERN_WARNING "sata_mv: Use BIOS \"JBOD\" volumes"
+ " instead for safety.\n");
+ }
case chip_6042:
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_IIE;
}
hpriv->hp_flags = hp_flags;
+ if (hp_flags & MV_HP_PCIE) {
+ hpriv->irq_cause_ofs = PCIE_IRQ_CAUSE_OFS;
+ hpriv->irq_mask_ofs = PCIE_IRQ_MASK_OFS;
+ hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS;
+ } else {
+ hpriv->irq_cause_ofs = PCI_IRQ_CAUSE_OFS;
+ hpriv->irq_mask_ofs = PCI_IRQ_MASK_OFS;
+ hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS;
+ }
return 0;
}
}
/* Clear any currently outstanding host interrupt conditions */
- writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
/* and unmask interrupt generation for host regs */
- writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
if (IS_GEN_I(hpriv))
writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
"PCI int cause/mask=0x%08x/0x%08x\n",
readl(mmio + HC_MAIN_IRQ_CAUSE_OFS),
readl(mmio + HC_MAIN_IRQ_MASK_OFS),
- readl(mmio + PCI_IRQ_CAUSE_OFS),
- readl(mmio + PCI_IRQ_MASK_OFS));
+ readl(mmio + hpriv->irq_cause_ofs),
+ readl(mmio + hpriv->irq_mask_ofs));
done:
return rc;
static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
- /* Since commands where a result TF is requested are not
- executed in ADMA mode, the only time this function will be called
- in ADMA mode will be if a command fails. In this case we
- don't care about going into register mode with ADMA commands
- pending, as the commands will all shortly be aborted anyway. */
+ /* Other than when internal or pass-through commands are executed,
+ the only time this function will be called in ADMA mode will be
+ if a command fails. In the failure case we don't care about going
+ into register mode with ADMA commands pending, as the commands will
+ all shortly be aborted anyway. We assume that NCQ commands are not
+ issued via passthrough, which is the only way that switching into
+ ADMA mode could abort outstanding commands. */
nv_adma_register_mode(ap);
ata_tf_read(ap, tf);
struct nv_adma_port_priv *pp = qc->ap->private_data;
/* ADMA engine can only be used for non-ATAPI DMA commands,
- or interrupt-driven no-data commands, where a result taskfile
- is not required. */
+ or interrupt-driven no-data commands. */
if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
- (qc->tf.flags & ATA_TFLAG_POLLING) ||
- (qc->flags & ATA_QCFLAG_RESULT_TF))
+ (qc->tf.flags & ATA_TFLAG_POLLING))
return 1;
if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
NV_CPB_CTL_IEN;
if (nv_adma_use_reg_mode(qc)) {
+ BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
+ (qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
ata_qc_prep(qc);
return;
VPRINTK("ENTER\n");
+ /* We can't handle result taskfile with NCQ commands, since
+ retrieving the taskfile switches us out of ADMA mode and would abort
+ existing commands. */
+ if (unlikely(qc->tf.protocol == ATA_PROT_NCQ &&
+ (qc->flags & ATA_QCFLAG_RESULT_TF))) {
+ ata_dev_printk(qc->dev, KERN_ERR,
+ "NCQ w/ RESULT_TF not allowed\n");
+ return AC_ERR_SYSTEM;
+ }
+
if (nv_adma_use_reg_mode(qc)) {
/* use ATA register mode */
VPRINTK("using ATA register mode: 0x%lx\n", qc->flags);
+ BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
+ (qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
return ata_qc_issue_prot(qc);
} else
SIL24_HOST_BAR = 0,
SIL24_PORT_BAR = 2,
+ /* sil24 fetches in chunks of 64bytes. The first block
+ * contains the PRB and two SGEs. From the second block, it's
+ * consisted of four SGEs and called SGT. Calculate the
+ * number of SGTs that fit into one page.
+ */
+ SIL24_PRB_SZ = sizeof(struct sil24_prb)
+ + 2 * sizeof(struct sil24_sge),
+ SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ)
+ / (4 * sizeof(struct sil24_sge)),
+
+ /* This will give us one unused SGEs for ATA. This extra SGE
+ * will be used to store CDB for ATAPI devices.
+ */
+ SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1,
+
/*
* Global controller registers (128 bytes @ BAR0)
*/
struct sil24_ata_block {
struct sil24_prb prb;
- struct sil24_sge sge[LIBATA_MAX_PRD];
+ struct sil24_sge sge[SIL24_MAX_SGE];
};
struct sil24_atapi_block {
struct sil24_prb prb;
u8 cdb[16];
- struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+ struct sil24_sge sge[SIL24_MAX_SGE];
};
union sil24_cmd_block {
.change_queue_depth = ata_scsi_change_queue_depth,
.can_queue = SIL24_MAX_CMDS,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = SIL24_MAX_SGE,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
static int printed_version;
struct ata_port_info pi = sil24_port_info[ent->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
int i, rc;
u32 tmp;
+ /* cause link error if sil24_cmd_block is sized wrongly */
+ if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
+ __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
+
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
he_dev->atm_dev->dev_data = he_dev;
atm_dev->dev_data = he_dev;
he_dev->number = atm_dev->number;
+#ifdef USE_TASKLET
+ tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev);
+#endif
+ spin_lock_init(&he_dev->global_lock);
+
if (he_start(atm_dev)) {
he_stop(he_dev);
err = -ENODEV;
if ((err = he_init_irq(he_dev)) != 0)
return err;
-#ifdef USE_TASKLET
- tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev);
-#endif
- spin_lock_init(&he_dev->global_lock);
-
/* 4.11 enable pci bus controller state machines */
host_cntl |= (OUTFF_ENB | CMDFF_ENB |
QUICK_RD_RETRY | QUICK_WR_RETRY | PERR_INT_ENB);
error = device_add_attrs(dev);
if (error)
goto AttrsError;
- error = device_pm_add(dev);
+ error = dpm_sysfs_add(dev);
if (error)
goto PMError;
+ device_pm_add(dev);
error = bus_add_device(dev);
if (error)
goto BusError;
return error;
BusError:
device_pm_remove(dev);
+ dpm_sysfs_remove(dev);
PMError:
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->bus_notifier,
obj-y := shutdown.o
-obj-$(CONFIG_PM_SLEEP) += main.o sysfs.o
+obj-$(CONFIG_PM) += sysfs.o
+obj-$(CONFIG_PM_SLEEP) += main.o
obj-$(CONFIG_PM_TRACE) += trace.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
int (*platform_enable_wakeup)(struct device *dev, int is_on);
-int device_pm_add(struct device *dev)
+void device_pm_add(struct device *dev)
{
- int error;
-
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
list_add_tail(&dev->power.entry, &dpm_active);
- error = dpm_sysfs_add(dev);
- if (error)
- list_del(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
- return error;
}
void device_pm_remove(struct device *dev)
extern struct list_head dpm_active; /* The active device list */
-static inline struct device * to_device(struct list_head * entry)
+static inline struct device *to_device(struct list_head *entry)
{
return container_of(entry, struct device, power.entry);
}
-extern int device_pm_add(struct device *);
+extern void device_pm_add(struct device *);
extern void device_pm_remove(struct device *);
+#else /* CONFIG_PM_SLEEP */
+
+
+static inline void device_pm_add(struct device *dev)
+{
+}
+
+static inline void device_pm_remove(struct device *dev)
+{
+}
+
+#endif
+
+#ifdef CONFIG_PM
+
/*
* sysfs.c
*/
extern int dpm_sysfs_add(struct device *);
extern void dpm_sysfs_remove(struct device *);
-#else /* CONFIG_PM_SLEEP */
-
+#else /* CONFIG_PM */
-static inline int device_pm_add(struct device * dev)
+static inline int dpm_sysfs_add(struct device *dev)
{
return 0;
}
-static inline void device_pm_remove(struct device * dev)
-{
+static inline void dpm_sysfs_remove(struct device *dev)
+{
}
#endif
#include <linux/hdreg.h>
#include <linux/blkdev.h>
+#include <linux/backing-dev.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
#include <linux/genhd.h>
if (gd == NULL) {
printk(KERN_ERR "aoe: cannot allocate disk structure for %ld.%ld\n",
d->aoemajor, d->aoeminor);
- spin_lock_irqsave(&d->lock, flags);
- d->flags &= ~DEVFL_GDALLOC;
- spin_unlock_irqrestore(&d->lock, flags);
- return;
+ goto err;
}
d->bufpool = mempool_create_slab_pool(MIN_BUFS, buf_pool_cache);
if (d->bufpool == NULL) {
printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%ld\n",
d->aoemajor, d->aoeminor);
- put_disk(gd);
- spin_lock_irqsave(&d->lock, flags);
- d->flags &= ~DEVFL_GDALLOC;
- spin_unlock_irqrestore(&d->lock, flags);
- return;
+ goto err_disk;
}
- spin_lock_irqsave(&d->lock, flags);
blk_queue_make_request(&d->blkq, aoeblk_make_request);
+ if (bdi_init(&d->blkq.backing_dev_info))
+ goto err_mempool;
+ spin_lock_irqsave(&d->lock, flags);
gd->major = AOE_MAJOR;
gd->first_minor = d->sysminor * AOE_PARTITIONS;
gd->fops = &aoe_bdops;
add_disk(gd);
aoedisk_add_sysfs(d);
+ return;
+
+err_mempool:
+ mempool_destroy(d->bufpool);
+err_disk:
+ put_disk(gd);
+err:
+ spin_lock_irqsave(&d->lock, flags);
+ d->flags &= ~DEVFL_GDALLOC;
+ spin_unlock_irqrestore(&d->lock, flags);
}
void
page->idx++;
if (page->idx >= bio->bi_vcnt) {
page->bio = bio->bi_next;
- page->idx = page->bio->bi_idx;
+ if (page->bio)
+ page->idx = page->bio->bi_idx;
}
pci_unmap_page(card->dev, desc->data_dma_handle,
err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_CAPACITY, &cap);
if (err) {
dev_err(&vdev->dev, "Bad/missing capacity in config\n");
- goto out_put_disk;
+ goto out_cleanup_queue;
}
/* If capacity is too big, truncate with warning. */
blk_queue_max_segment_size(vblk->disk->queue, v);
else if (err != -ENOENT) {
dev_err(&vdev->dev, "Bad SIZE_MAX in config\n");
- goto out_put_disk;
+ goto out_cleanup_queue;
}
err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SEG_MAX, &v);
blk_queue_max_hw_segments(vblk->disk->queue, v);
else if (err != -ENOENT) {
dev_err(&vdev->dev, "Bad SEG_MAX in config\n");
- goto out_put_disk;
+ goto out_cleanup_queue;
}
add_disk(vblk->disk);
return 0;
+out_cleanup_queue:
+ blk_cleanup_queue(vblk->disk->queue);
out_put_disk:
put_disk(vblk->disk);
out_unregister_blkdev:
put_disk(vblk->disk);
unregister_blkdev(major, "virtblk");
mempool_destroy(vblk->pool);
+ /* There should be nothing in the queue now, so no need to shutdown */
+ vdev->config->del_vq(vblk->vq);
kfree(vblk);
}
config LEGACY_PTY_COUNT
int "Maximum number of legacy PTY in use"
depends on LEGACY_PTYS
- range 1 256
+ range 0 256
default "256"
---help---
The maximum number of legacy PTYs that can be used at any one time.
apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
{
struct apm_user *as = filp->private_data;
- unsigned long flags;
int err = -EINVAL;
if (!as->suser || !as->writer)
* Wait for the suspend/resume to complete. If there
* are pending acknowledges, we wait here for them.
*/
- flags = current->flags;
+ freezer_do_not_count();
wait_event(apm_suspend_waitqueue,
as->suspend_state == SUSPEND_DONE);
+
+ /*
+ * Since we are waiting until the suspend is done, the
+ * try_to_freeze() in freezer_count() will not trigger
+ */
+ freezer_count();
} else {
as->suspend_state = SUSPEND_WAIT;
mutex_unlock(&state_lock);
* Wait for the suspend/resume to complete. If there
* are pending acknowledges, we wait here for them.
*/
- flags = current->flags;
-
- wait_event_interruptible(apm_suspend_waitqueue,
+ wait_event_freezable(apm_suspend_waitqueue,
as->suspend_state == SUSPEND_DONE);
}
- current->flags = flags;
-
mutex_lock(&state_lock);
err = as->suspend_result;
as->suspend_state = SUSPEND_NONE;
for (j = 0; j < ARRAY_SIZE(rm); j++) {
if (c == rm[j].on) {
outl(m1, base + rm[j].wr_offset);
+ /* If enabling output, turn off AUX 1 and AUX 2 */
+ if (c == 'O') {
+ outl(m0, base + 0x10);
+ outl(m0, base + 0x14);
+ }
break;
} else if (c == rm[j].off) {
outl(m0, base + rm[j].wr_offset);
};
#endif
-static int __devinit sonypi_create_input_devices(void)
+static int __devinit sonypi_create_input_devices(struct platform_device *pdev)
{
struct input_dev *jog_dev;
struct input_dev *key_dev;
jog_dev->name = "Sony Vaio Jogdial";
jog_dev->id.bustype = BUS_ISA;
jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
+ jog_dev->dev.parent = &pdev->dev;
jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE);
key_dev->name = "Sony Vaio Keys";
key_dev->id.bustype = BUS_ISA;
key_dev->id.vendor = PCI_VENDOR_ID_SONY;
+ key_dev->dev.parent = &pdev->dev;
/* Initialize the Input Drivers: special keys */
key_dev->evbit[0] = BIT_MASK(EV_KEY);
if (useinput) {
- error = sonypi_create_input_devices();
+ error = sonypi_create_input_devices(dev);
if (error) {
printk(KERN_ERR
"sonypi: failed to create input devices\n");
{
sonypi_disable();
- synchronize_sched(); /* Allow sonypi interrupt to complete. */
+ synchronize_irq(sonypi_device.irq);
flush_scheduled_work();
if (useinput) {
goto out_err;
}
+ if (request_locality(chip, 0) != 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
/* Default timeouts */
if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
dev_dbg(dev, "\tData Avail Int Support\n");
- if (request_locality(chip, 0) != 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
/* INTERRUPT Setup */
init_waitqueue_head(&chip->vendor.read_queue);
init_waitqueue_head(&chip->vendor.int_queue);
config CRYPTO_DEV_PADLOCK
tristate "Support for VIA PadLock ACE"
- depends on X86_32
+ depends on X86_32 && !UML
select CRYPTO_ALGAPI
help
Some VIA processors come with an integrated crypto engine
#
menuconfig DMADEVICES
- bool "DMA Offload Engine support"
+ bool "DMA Engine support"
depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
help
- Intel(R) offload engines enable offloading memory copies in the
- network stack and RAID operations in the MD driver.
+ DMA engines can do asynchronous data transfers without
+ involving the host CPU. Currently, this framework can be
+ used to offload memory copies in the network stack and
+ RAID operations in the MD driver.
if DMADEVICES
flush_writes(ctx->ohci);
}
+static struct descriptor *
+find_branch_descriptor(struct descriptor *d, int z)
+{
+ int b, key;
+
+ b = (le16_to_cpu(d->control) & DESCRIPTOR_BRANCH_ALWAYS) >> 2;
+ key = (le16_to_cpu(d->control) & DESCRIPTOR_KEY_IMMEDIATE) >> 8;
+
+ /* figure out which descriptor the branch address goes in */
+ if (z == 2 && (b == 3 || key == 2))
+ return d;
+ else
+ return d + z - 1;
+}
+
static void context_tasklet(unsigned long data)
{
struct context *ctx = (struct context *) data;
address = le32_to_cpu(last->branch_address);
z = address & 0xf;
d = ctx->buffer + (address - ctx->buffer_bus) / sizeof(*d);
- last = (z == 2) ? d : d + z - 1;
+ last = find_branch_descriptor(d, z);
if (!ctx->callback(ctx, d, last))
break;
ctx->head_descriptor = d + z + extra;
ctx->prev_descriptor->branch_address = cpu_to_le32(d_bus | z);
- ctx->prev_descriptor = z == 2 ? d : d + z - 1;
+ ctx->prev_descriptor = find_branch_descriptor(d, z);
dma_sync_single_for_device(ctx->ohci->card.device, ctx->buffer_bus,
ctx->buffer_size, DMA_TO_DEVICE);
driver_data = (struct driver_data *) &d[3];
driver_data->packet = packet;
packet->driver_data = driver_data;
-
+
if (packet->payload_length > 0) {
payload_bus =
dma_map_single(ohci->card.device, packet->payload,
if (retval < 0)
packet->callback(packet, &ctx->ohci->card, packet->ack);
-
+
}
static void bus_reset_tasklet(unsigned long data)
return 1;
}
+static int handle_ir_packet_per_buffer(struct context *context,
+ struct descriptor *d,
+ struct descriptor *last)
+{
+ struct iso_context *ctx =
+ container_of(context, struct iso_context, context);
+ struct descriptor *pd = d + 1;
+ __le32 *ir_header;
+ size_t header_length;
+ void *p, *end;
+ int i, z;
+
+ if (pd->res_count == pd->req_count)
+ /* Descriptor(s) not done yet, stop iteration */
+ return 0;
+
+ header_length = le16_to_cpu(d->req_count);
+
+ i = ctx->header_length;
+ z = le32_to_cpu(pd->branch_address) & 0xf;
+ p = d + z;
+ end = p + header_length;
+
+ while (p < end && i + ctx->base.header_size <= PAGE_SIZE) {
+ /*
+ * The iso header is byteswapped to little endian by
+ * the controller, but the remaining header quadlets
+ * are big endian. We want to present all the headers
+ * as big endian, so we have to swap the first quadlet.
+ */
+ *(u32 *) (ctx->header + i) = __swab32(*(u32 *) (p + 4));
+ memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4);
+ i += ctx->base.header_size;
+ p += ctx->base.header_size + 4;
+ }
+
+ ctx->header_length = i;
+
+ if (le16_to_cpu(pd->control) & DESCRIPTOR_IRQ_ALWAYS) {
+ ir_header = (__le32 *) (d + z);
+ ctx->base.callback(&ctx->base,
+ le32_to_cpu(ir_header[0]) & 0xffff,
+ ctx->header_length, ctx->header,
+ ctx->base.callback_data);
+ ctx->header_length = 0;
+ }
+
+
+ return 1;
+}
+
static int handle_it_packet(struct context *context,
struct descriptor *d,
struct descriptor *last)
} else {
mask = &ohci->ir_context_mask;
list = ohci->ir_context_list;
- callback = handle_ir_dualbuffer_packet;
+ if (ohci->version >= OHCI_VERSION_1_1)
+ callback = handle_ir_dualbuffer_packet;
+ else
+ callback = handle_ir_packet_per_buffer;
}
- /* FIXME: We need a fallback for pre 1.1 OHCI. */
- if (callback == handle_ir_dualbuffer_packet &&
- ohci->version < OHCI_VERSION_1_1)
- return ERR_PTR(-ENOSYS);
-
spin_lock_irqsave(&ohci->lock, flags);
index = ffs(*mask) - 1;
if (index >= 0)
context_run(&ctx->context, match);
} else {
index = ctx - ohci->ir_context_list;
- control = IR_CONTEXT_DUAL_BUFFER_MODE | IR_CONTEXT_ISOCH_HEADER;
+ control = IR_CONTEXT_ISOCH_HEADER;
+ if (ohci->version >= OHCI_VERSION_1_1)
+ control |= IR_CONTEXT_DUAL_BUFFER_MODE;
match = (tags << 28) | (sync << 8) | ctx->base.channel;
if (cycle >= 0) {
match |= (cycle & 0x07fff) << 12;
offset = payload & ~PAGE_MASK;
rest = p->payload_length;
- /* FIXME: OHCI 1.0 doesn't support dual buffer receive */
/* FIXME: make packet-per-buffer/dual-buffer a context option */
while (rest > 0) {
d = context_get_descriptors(&ctx->context,
return 0;
}
+static int
+ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload)
+{
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+ struct descriptor *d = NULL, *pd = NULL;
+ struct fw_iso_packet *p;
+ dma_addr_t d_bus, page_bus;
+ u32 z, header_z, rest;
+ int i, page, offset, packet_count, header_size;
+
+ if (packet->skip) {
+ d = context_get_descriptors(&ctx->context, 1, &d_bus);
+ if (d == NULL)
+ return -ENOMEM;
+
+ d->control = cpu_to_le16(DESCRIPTOR_STATUS |
+ DESCRIPTOR_INPUT_LAST |
+ DESCRIPTOR_BRANCH_ALWAYS |
+ DESCRIPTOR_WAIT);
+ context_append(&ctx->context, d, 1, 0);
+ }
+
+ /* one descriptor for header, one for payload */
+ /* FIXME: handle cases where we need multiple desc. for payload */
+ z = 2;
+ p = packet;
+
+ /*
+ * The OHCI controller puts the status word in the
+ * buffer too, so we need 4 extra bytes per packet.
+ */
+ packet_count = p->header_length / ctx->base.header_size;
+ header_size = packet_count * (ctx->base.header_size + 4);
+
+ /* Get header size in number of descriptors. */
+ header_z = DIV_ROUND_UP(header_size, sizeof(*d));
+ page = payload >> PAGE_SHIFT;
+ offset = payload & ~PAGE_MASK;
+ rest = p->payload_length;
+
+ for (i = 0; i < packet_count; i++) {
+ /* d points to the header descriptor */
+ d = context_get_descriptors(&ctx->context,
+ z + header_z, &d_bus);
+ if (d == NULL)
+ return -ENOMEM;
+
+ d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE);
+ d->req_count = cpu_to_le16(header_size);
+ d->res_count = d->req_count;
+ d->data_address = cpu_to_le32(d_bus + (z * sizeof(*d)));
+
+ /* pd points to the payload descriptor */
+ pd = d + 1;
+ pd->control = cpu_to_le16(DESCRIPTOR_STATUS |
+ DESCRIPTOR_INPUT_LAST |
+ DESCRIPTOR_BRANCH_ALWAYS);
+ if (p->interrupt)
+ pd->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
+
+ pd->req_count = cpu_to_le16(rest);
+ pd->res_count = pd->req_count;
+
+ page_bus = page_private(buffer->pages[page]);
+ pd->data_address = cpu_to_le32(page_bus + offset);
+
+ context_append(&ctx->context, d, z, header_z);
+ }
+
+ return 0;
+}
+
static int
ohci_queue_iso(struct fw_iso_context *base,
struct fw_iso_packet *packet,
return ohci_queue_iso_receive_dualbuffer(base, packet,
buffer, payload);
else
- /* FIXME: Implement fallback for OHCI 1.0 controllers. */
- return -ENOSYS;
+ return ohci_queue_iso_receive_packet_per_buffer(base, packet,
+ buffer,
+ payload);
}
static const struct fw_card_driver ohci_driver = {
ohci->version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
dev->dev.bus_id, ohci->version >> 16, ohci->version & 0xff);
- if (ohci->version < OHCI_VERSION_1_1) {
- fw_notify(" Isochronous I/O is not yet implemented for "
- "OHCI 1.0 chips.\n");
- fw_notify(" Cameras, audio devices etc. won't work on "
- "this controller with this driver version.\n");
- }
return 0;
fail_self_id:
switch (action) {
case CPU_ONLINE:
- case CPU_ONLINE_FROZEN:
+ case CPU_DOWN_FAILED:
coretemp_device_add(cpu);
break;
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
+ case CPU_DOWN_PREPARE:
coretemp_device_remove(cpu);
break;
}
DAVINCI_I2C_STR_REG,
w);
} else
- dev_err(dev->dev, "RDR IRQ while no"
+ dev_err(dev->dev, "RDR IRQ while no "
"data requested\n");
break;
DAVINCI_I2C_IMR_REG,
w);
} else
- dev_err(dev->dev, "TDR IRQ while no data to"
+ dev_err(dev->dev, "TDR IRQ while no data to "
"send\n");
break;
adap->owner = THIS_MODULE;
snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
adap->algo_data = bit_data;
+ adap->class = I2C_CLASS_HWMON;
adap->dev.parent = &pdev->dev;
/*
while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
OMAP_I2C_SYSS_RDONE)) {
if (time_after(jiffies, timeout)) {
- dev_warn(dev->dev, "timeout waiting"
+ dev_warn(dev->dev, "timeout waiting "
"for controller reset\n");
return -ETIMEDOUT;
}
dev->buf_len--;
}
} else
- dev_err(dev->dev, "RRDY IRQ while no data"
+ dev_err(dev->dev, "RRDY IRQ while no data "
"requested\n");
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY);
continue;
dev->buf_len--;
}
} else
- dev_err(dev->dev, "XRDY IRQ while no"
+ dev_err(dev->dev, "XRDY IRQ while no "
"data to send\n");
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/i2c.h>
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- default H8300
help
If unsure, say N.
config BLK_DEV_AMD74XX
tristate "AMD and nVidia IDE support"
+ depends on !ARM
select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for AMD-7xx and AMD-8111 chips
Say Y here if you want to support the onboard IDE channels on the
Simtec BAST or the Thorcom VR1000
+config ETRAX_IDE
+ bool "ETRAX IDE support"
+ depends on CRIS && BROKEN
+ select BLK_DEV_IDEDMA
+ select IDE_GENERIC
+ help
+ Enables the ETRAX IDE driver.
+
+ You can't use parallel ports or SCSI ports at the same time.
+
+config ETRAX_IDE_DELAY
+ int "Delay for drives to regain consciousness"
+ depends on ETRAX_IDE && ETRAX_ARCH_V10
+ default 15
+ help
+ Number of seconds to wait for IDE drives to spin up after an IDE
+ reset.
+
+choice
+ prompt "IDE reset pin"
+ depends on ETRAX_IDE && ETRAX_ARCH_V10
+ default ETRAX_IDE_PB7_RESET
+
+config ETRAX_IDE_PB7_RESET
+ bool "Port_PB_Bit_7"
+ help
+ IDE reset on pin 7 on port B
+
+config ETRAX_IDE_G27_RESET
+ bool "Port_G_Bit_27"
+ help
+ IDE reset on pin 27 on port G
+
+endchoice
+
+config IDE_H8300
+ bool "H8300 IDE support"
+ depends on H8300
+ select IDE_GENERIC
+ default y
+ help
+ Enables the H8300 IDE driver.
+
config BLK_DEV_GAYLE
bool "Amiga Gayle IDE interface support"
depends on AMIGA
config BLK_DEV_MPC8xx_IDE
bool "MPC8xx IDE support"
- depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
+ depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
select IDE_GENERIC
help
This option provides support for IDE on Motorola MPC8xx Systems.
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
# built-in only drivers from h8300/
-ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
+ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o
obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
- /* first fill in some stuff in the ide_hwifs fields */
+ for (h = 0; h < 4; h++) {
+ ide_hwif_t *hwif = NULL;
- for(h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
ide_setup_ports(&hw, cris_ide_base_address(h),
ide_offsets,
0, 0, cris_ide_ack_intr,
ide_default_irq(0));
ide_register_hw(&hw, NULL, 1, &hwif);
+ if (hwif == NULL)
+ continue;
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;
{ "_NEC DV5800A", NULL },
{ "SAMSUNG CD-ROM SN-124", "N001" },
{ "Seagate STT20000A", NULL },
+ { "CD-ROM CDR_U200", "1.09" },
{ NULL , NULL }
};
hwif->atapi_output_bytes = atapi_output_bytes;
}
-/*
- * Beginning of Taskfile OPCODE Library and feature sets.
- */
void ide_fix_driveid (struct hd_driveid *id)
{
#ifndef __LITTLE_ENDIAN
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB00" },
+ { "TSSTcorp CDDVDW SH-S202J" , "SB01" },
+ { "TSSTcorp CDDVDW SH-S202N" , "SB00" },
+ { "TSSTcorp CDDVDW SH-S202N" , "SB01" },
{ NULL , NULL }
};
int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
- int error;
+ int error = 0;
u8 stat;
// while (HWGROUP(drive)->busy)
hwif->dma_host_off(drive);
#endif
+ /* Skip setting PIO flow-control modes on pre-EIDE drives */
+ if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08))
+ goto skip;
+
/*
* Don't use ide_wait_cmd here - it will
* attempt to set_geometry and recalibrate,
drive->id->dma_mword &= ~0x0F00;
drive->id->dma_1word &= ~0x0F00;
+ skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
if (speed >= XFER_SW_DMA_0)
hwif->dma_host_on(drive);
static int wait_hwif_ready(ide_hwif_t *hwif)
{
- int rc;
+ int unit, rc;
printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
return rc;
/* Now make sure both master & slave are ready */
- SELECT_DRIVE(&hwif->drives[0]);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
- mdelay(2);
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- return rc;
- SELECT_DRIVE(&hwif->drives[1]);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
- mdelay(2);
- rc = ide_wait_not_busy(hwif, 35000);
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *drive = &hwif->drives[unit];
+ /* Ignore disks that we will not probe for later. */
+ if (!drive->noprobe || drive->present) {
+ SELECT_DRIVE(drive);
+ hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
+ mdelay(2);
+ rc = ide_wait_not_busy(hwif, 35000);
+ if (rc)
+ goto out;
+ } else
+ printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n",
+ drive->name);
+ }
+out:
/* Exit function with master reselected (let's be sane) */
- SELECT_DRIVE(&hwif->drives[0]);
-
+ if (unit)
+ SELECT_DRIVE(&hwif->drives[0]);
+
return rc;
}
/* port addresses for auto-detection */
#define ALI_NUM_PORTS 4
-static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};
+static const int ports[ALI_NUM_PORTS] __initdata =
+ { 0x074, 0x0f4, 0x034, 0x0e4 };
/* register initialization data */
typedef struct { u8 reg, data; } RegInitializer;
-static RegInitializer initData[] __initdata = {
+static const RegInitializer initData[] __initdata = {
{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
* Initialize controller registers with default values.
*/
static int __init initRegisters (void) {
- RegInitializer *p;
+ const RegInitializer *p;
u8 t;
unsigned long flags;
* Probe for a Macintosh IDE interface
*/
-void macide_init(void)
+void __init macide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
* Probe for Q40 IDE interfaces
*/
-void q40ide_init(void)
+void __init q40ide_init(void)
{
int i;
ide_hwif_t *hwif;
{
struct ide_port_info d;
u8 idx = id->driver_data;
+ int err;
+
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
d = aec62xx_chipsets[idx];
}
}
- return ide_setup_pci_device(dev, &d);
+ err = ide_setup_pci_device(dev, &d);
+ if (err)
+ pci_disable_device(dev);
+
+ return err;
}
static const struct pci_device_id aec62xx_pci_tbl[] = {
pdev->subsystem_device == 0x10AF)
return 1;
+ /* Mitac 8317 (Winbook-A) and relatives */
+ if (pdev->subsystem_vendor == 0x1071 &&
+ pdev->subsystem_device == 0x8317)
+ return 1;
+
/* Systems by DMI */
if (dmi_check_system(cable_dmi_table))
return 1;
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
+ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
/* end marker */
{ 0, }
/*
- * linux/drivers/ide/pci/siimage.c Version 1.18 Oct 18 2007
+ * linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
}
}
-/**
- * siimage_reset - reset a device on an siimage controller
- * @drive: drive to reset
- *
- * Perform a controller level reset fo the device. For
- * SATA we must also check the PHY.
- */
-
-static void siimage_reset (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 reset = 0;
- unsigned long addr = siimage_selreg(hwif, 0);
-
- if (hwif->mmio) {
- reset = hwif->INB(addr);
- hwif->OUTB((reset|0x03), addr);
- /* FIXME:posting */
- udelay(25);
- hwif->OUTB(reset, addr);
- (void) hwif->INB(addr);
- } else {
- pci_read_config_byte(hwif->pci_dev, addr, &reset);
- pci_write_config_byte(hwif->pci_dev, addr, reset|0x03);
- udelay(25);
- pci_write_config_byte(hwif->pci_dev, addr, reset);
- pci_read_config_byte(hwif->pci_dev, addr, &reset);
- }
-
- if (SATA_STATUS_REG) {
- /* SATA_STATUS_REG is valid only when in MMIO mode */
- u32 sata_stat = readl((void __iomem *)SATA_STATUS_REG);
- printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n",
- hwif->name, sata_stat, __FUNCTION__);
- if (!(sata_stat)) {
- printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, sata_stat);
- drive->failures++;
- }
- }
-}
-
/**
* proc_reports_siimage - add siimage controller to proc
* @dev: PCI device
{
u8 sata = is_sata(hwif);
- hwif->resetproc = &siimage_reset;
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->set_dma_mode = &sil_set_dma_mode;
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
+ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
return (status == 0x00ff);
}
-/*
- * Invoked from ide-dma.c at boot time.
- */
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
unsigned int cfgbase = 0;
if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
if (pmif->broken_dma_warn == 0) {
- printk(KERN_WARNING "%s: DMA on non aligned address,"
+ printk(KERN_WARNING "%s: DMA on non aligned address, "
"switching to PIO on Ohare chipset\n", drive->name);
pmif->broken_dma_warn = 1;
}
link = ib_width_enum_to_int(pa.active_width) * pa.active_speed;
- /* IPD = round((link / path) - 1) */
- *ipd = ((link + (path >> 1)) / path) - 1;
+ if (path >= link)
+ /* no need to throttle if path faster than link */
+ *ipd = 0;
+ else
+ /* IPD = round((link / path) - 1) */
+ *ipd = ((link + (path >> 1)) / path) - 1;
return 0;
}
mqpcb->service_level = attr->ah_attr.sl;
update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL, 1);
- if (ehca_calc_ipd(shca, my_qp->init_attr.port_num,
+ if (ehca_calc_ipd(shca, mqpcb->prim_phys_port,
attr->ah_attr.static_rate,
&mqpcb->max_static_rate)) {
ret = -EINVAL;
mqpcb->source_path_bits_al = attr->alt_ah_attr.src_path_bits;
mqpcb->service_level_al = attr->alt_ah_attr.sl;
- if (ehca_calc_ipd(shca, my_qp->init_attr.port_num,
+ if (ehca_calc_ipd(shca, mqpcb->alt_phys_port,
attr->alt_ah_attr.static_rate,
&mqpcb->max_static_rate_al)) {
ret = -EINVAL;
goto bail;
}
- /*
- * Return the address of the WC as the offset to mmap.
- * See ipath_mmap() for details.
- */
+ /* Check that we can write the offset to mmap. */
if (udata && udata->outlen >= sizeof(__u64)) {
- __u64 offset = (__u64) wc;
+ __u64 offset = 0;
ret = ib_copy_to_udata(udata, &offset, sizeof(offset));
if (ret)
struct ipath_mmap_info *ip = cq->ip;
ipath_update_mmap_info(dev, ip, sz, wc);
+
+ /*
+ * Return the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->outlen >= sizeof(__u64)) {
+ ret = ib_copy_to_udata(udata, &ip->offset,
+ sizeof(ip->offset));
+ if (ret)
+ goto bail;
+ }
+
spin_lock_irq(&dev->pending_lock);
if (list_empty(&ip->pending_mmaps))
list_add(&ip->pending_mmaps, &dev->pending_mmaps);
init_attr->qp_type);
if (err) {
ret = ERR_PTR(err);
- goto bail_rwq;
+ vfree(qp->r_rq.wq);
+ goto bail_qp;
}
qp->ip = NULL;
ipath_reset_qp(qp);
sizeof(offset));
if (err) {
ret = ERR_PTR(err);
- goto bail_rwq;
+ goto bail_ip;
}
} else {
u32 s = sizeof(struct ipath_rwq) +
qp->r_rq.wq);
if (!qp->ip) {
ret = ERR_PTR(-ENOMEM);
- goto bail_rwq;
+ goto bail_ip;
}
err = ib_copy_to_udata(udata, &(qp->ip->offset),
goto bail;
bail_ip:
- kfree(qp->ip);
-bail_rwq:
- vfree(qp->r_rq.wq);
+ if (qp->ip)
+ kref_put(&qp->ip->ref, ipath_release_mmap_info);
+ else
+ vfree(qp->r_rq.wq);
+ ipath_free_qp(&dev->qp_table, qp);
bail_qp:
kfree(qp);
bail_swq:
if ((unsigned) wr->num_sge > srq->rq.max_sge) {
*bad_wr = wr;
- ret = -ENOMEM;
+ ret = -EINVAL;
goto bail;
}
struct ib_udata *udata)
{
struct ipath_srq *srq = to_isrq(ibsrq);
+ struct ipath_rwq *wq;
int ret = 0;
if (attr_mask & IB_SRQ_MAX_WR) {
struct ipath_rwq *owq;
- struct ipath_rwq *wq;
struct ipath_rwqe *p;
u32 sz, size, n, head, tail;
goto bail;
}
- /*
- * Return the address of the RWQ as the offset to mmap.
- * See ipath_mmap() for details.
- */
+ /* Check that we can write the offset to mmap. */
if (udata && udata->inlen >= sizeof(__u64)) {
__u64 offset_addr;
- __u64 offset = (__u64) wq;
+ __u64 offset = 0;
ret = ib_copy_from_udata(&offset_addr, udata,
sizeof(offset_addr));
- if (ret) {
- vfree(wq);
- goto bail;
- }
+ if (ret)
+ goto bail_free;
udata->outbuf = (void __user *) offset_addr;
ret = ib_copy_to_udata(udata, &offset,
sizeof(offset));
- if (ret) {
- vfree(wq);
- goto bail;
- }
+ if (ret)
+ goto bail_free;
}
spin_lock_irq(&srq->rq.lock);
else
n -= tail;
if (size <= n) {
- spin_unlock_irq(&srq->rq.lock);
- vfree(wq);
ret = -EINVAL;
- goto bail;
+ goto bail_unlock;
}
n = 0;
p = wq->wq;
u32 s = sizeof(struct ipath_rwq) + size * sz;
ipath_update_mmap_info(dev, ip, s, wq);
+
+ /*
+ * Return the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->inlen >= sizeof(__u64)) {
+ ret = ib_copy_to_udata(udata, &ip->offset,
+ sizeof(ip->offset));
+ if (ret)
+ goto bail;
+ }
+
spin_lock_irq(&dev->pending_lock);
if (list_empty(&ip->pending_mmaps))
list_add(&ip->pending_mmaps,
srq->limit = attr->srq_limit;
spin_unlock_irq(&srq->rq.lock);
}
+ goto bail;
+bail_unlock:
+ spin_unlock_irq(&srq->rq.lock);
+bail_free:
+ vfree(wq);
bail:
return ret;
}
next = qp->s_head + 1;
if (next >= qp->s_size)
next = 0;
- if (next == qp->s_last)
- goto bail_inval;
+ if (next == qp->s_last) {
+ ret = -ENOMEM;
+ goto bail;
+ }
wqe = get_swqe_ptr(qp, qp->s_head);
wqe->wr = *wr;
if ((unsigned) wr->num_sge > qp->r_rq.max_sge) {
*bad_wr = wr;
- ret = -ENOMEM;
+ ret = -EINVAL;
goto bail;
}
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_path *path;
+ if (!priv->broadcast)
+ return NULL;
+
path = kzalloc(sizeof *path, GFP_ATOMIC);
if (!path)
return NULL;
if (i + 1 < data->dma_nents) {
next_addr = ib_sg_dma_address(ibdev, sg_next(sg));
/* are i, i+1 fragments of the same page? */
- if (end_addr == next_addr)
+ if (end_addr == next_addr) {
+ cnt++;
continue;
- else if (!IS_4K_ALIGNED(end_addr)) {
+ } else if (!IS_4K_ALIGNED(end_addr)) {
ret_len = cnt + 1;
break;
}
}
+ cnt++;
}
if (i == data->dma_nents)
ret_len = cnt; /* loop ended */
config KEYBOARD_BFIN
tristate "Blackfin BF54x keypad support"
- depends on BF54x
+ depends on (BF54x && !BF544)
help
Say Y here if you want to use the BF54x keypad.
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
- int irq = gpio_to_irq(button->gpio);
+ int irq;
unsigned int type = button->type ?: EV_KEY;
+ error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
+ if (error < 0) {
+ pr_err("gpio-keys: failed to request GPIO %d,"
+ " error %d\n", button->gpio, error);
+ goto fail;
+ }
+
+ error = gpio_direction_input(button->gpio);
+ if (error < 0) {
+ pr_err("gpio-keys: failed to configure input"
+ " direction for GPIO %d, error %d\n",
+ button->gpio, error);
+ gpio_free(button->gpio);
+ goto fail;
+ }
+
+ irq = gpio_to_irq(button->gpio);
if (irq < 0) {
error = irq;
- printk(KERN_ERR
- "gpio-keys: "
- "Unable to get irq number for GPIO %d,"
- "error %d\n",
+ pr_err("gpio-keys: Unable to get irq number"
+ " for GPIO %d, error %d\n",
button->gpio, error);
+ gpio_free(button->gpio);
goto fail;
}
button->desc ? button->desc : "gpio_keys",
pdev);
if (error) {
- printk(KERN_ERR
- "gpio-keys: Unable to claim irq %d; error %d\n",
+ pr_err("gpio-keys: Unable to claim irq %d; error %d\n",
irq, error);
+ gpio_free(button->gpio);
goto fail;
}
error = input_register_device(input);
if (error) {
- printk(KERN_ERR
- "gpio-keys: Unable to register input device, "
+ pr_err("gpio-keys: Unable to register input device, "
"error: %d\n", error);
goto fail;
}
return 0;
fail:
- while (--i >= 0)
+ while (--i >= 0) {
free_irq(gpio_to_irq(pdata->buttons[i].gpio), pdev);
+ gpio_free(pdata->buttons[i].gpio);
+ }
platform_set_drvdata(pdev, NULL);
input_free_device(input);
for (i = 0; i < pdata->nbuttons; i++) {
int irq = gpio_to_irq(pdata->buttons[i].gpio);
free_irq(irq, pdev);
+ gpio_free(pdata->buttons[i].gpio);
}
input_unregister_device(input);
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
- depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN
+ depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
---help---
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
},
},
+ {
+ .ident = "Microsoft Virtual Machine",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"),
+ },
+ },
{ }
};
ts->irq_disabled = 0;
enable_irq(spi->irq);
- if (req->msg.status)
- status = req->msg.status;
-
- /* on-wire is a must-ignore bit, a BE12 value, then padding */
- sample = be16_to_cpu(req->sample);
- sample = sample >> 3;
- sample &= 0x0fff;
+ if (status == 0) {
+ /* on-wire is a must-ignore bit, a BE12 value, then padding */
+ sample = be16_to_cpu(req->sample);
+ sample = sample >> 3;
+ sample &= 0x0fff;
+ }
kfree(req);
return status ? status : sample;
return(0);
case CARD_INIT:
delay = (75*HZ)/100 +1;
- cs->hw.hfcD.timer.expires = jiffies + delay;
- add_timer(&cs->hw.hfcD.timer);
+ mod_timer(&cs->hw.hfcD.timer, jiffies + delay);
spin_lock_irqsave(&cs->lock, flags);
reset_hfcs(cs);
init2bds0(cs);
if (copy_from_user(&iocts, argp,
sizeof(isdn_ioctl_struct)))
return -EFAULT;
+ iocts.drvid[sizeof(iocts.drvid)-1] = 0;
if (strlen(iocts.drvid)) {
if ((p = strchr(iocts.drvid, ',')))
*p = 0;
if (copy_from_user(&iocts, argp,
sizeof(isdn_ioctl_struct)))
return -EFAULT;
+ iocts.drvid[sizeof(iocts.drvid)-1] = 0;
if (strlen(iocts.drvid)) {
drvidx = -1;
for (i = 0; i < ISDN_MAX_DRIVERS; i++)
} else {
p = (char __user *) iocts.arg;
for (i = 0; i < 10; i++) {
- sprintf(bname, "%s%s",
+ snprintf(bname, sizeof(bname), "%s%s",
strlen(dev->drv[drvidx]->msn2eaz[i]) ?
dev->drv[drvidx]->msn2eaz[i] : "_",
(i < 9) ? "," : "\0");
char *p;
if (copy_from_user(&iocts, argp, sizeof(isdn_ioctl_struct)))
return -EFAULT;
+ iocts.drvid[sizeof(iocts.drvid)-1] = 0;
if (strlen(iocts.drvid)) {
if ((p = strchr(iocts.drvid, ',')))
*p = 0;
u_long flags;
isdn_net_dev *p;
isdn_net_phone *n;
- char nr[32];
+ char nr[ISDN_MSNLEN];
char *my_eaz;
/* Search name in netdev-chain */
nr[1] = '\0';
printk(KERN_INFO "isdn_net: Incoming call without OAD, assuming '0'\n");
} else
- strcpy(nr, setup->phone);
+ strlcpy(nr, setup->phone, ISDN_MSNLEN);
si1 = (int) setup->si1;
si2 = (int) setup->si2;
if (!setup->eazmsn[0]) {
chidx = -1;
}
}
- strcpy(lp->msn, cfg->eaz);
+ strlcpy(lp->msn, cfg->eaz, sizeof(lp->msn));
lp->pre_device = drvidx;
lp->pre_channel = chidx;
lp->onhtime = cfg->onhtime;
if (p) {
if (!(n = kmalloc(sizeof(isdn_net_phone), GFP_KERNEL)))
return -ENOMEM;
- strcpy(n->num, phone->phone);
+ strlcpy(n->num, phone->phone, sizeof(n->num));
n->next = p->local->phone[phone->outgoing & 1];
p->local->phone[phone->outgoing & 1] = n;
return 0;
int emulate_clts(struct kvm_vcpu *vcpu)
{
- vcpu->cr0 &= ~X86_CR0_TS;
- kvm_x86_ops->set_cr0(vcpu, vcpu->cr0);
+ kvm_x86_ops->set_cr0(vcpu, vcpu->cr0 & ~X86_CR0_TS);
return X86EMUL_CONTINUE;
}
wrmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]);
rdtscll(vcpu->host_tsc);
+ kvm_put_guest_fpu(vcpu);
}
static void svm_vcpu_decache(struct kvm_vcpu *vcpu)
#define JMP_REL(rel) \
do { \
- _eip += (int)(rel); \
- _eip = ((op_bytes == 2) ? (uint16_t)_eip : (uint32_t)_eip); \
+ register_address_increment(_eip, rel); \
} while (0)
/*
}
register_address_increment(_regs[VCPU_REGS_RSP],
-dst.bytes);
- if ((rc = ops->write_std(
+ if ((rc = ops->write_emulated(
register_address(ctxt->ss_base,
_regs[VCPU_REGS_RSP]),
&dst.val, dst.bytes, ctxt->vcpu)) != 0)
}
src.val = (unsigned long) _eip;
JMP_REL(rel);
+ op_bytes = ad_bytes;
goto push;
}
case 0xe9: /* jmp rel */
write_unlock(&leds_list_lock);
#ifdef CONFIG_LEDS_TRIGGERS
- rwlock_init(&led_cdev->trigger_lock);
+ init_rwsem(&led_cdev->trigger_lock);
rc = device_create_file(led_cdev->dev, &dev_attr_trigger);
if (rc)
device_remove_file(led_cdev->dev, &dev_attr_brightness);
#ifdef CONFIG_LEDS_TRIGGERS
device_remove_file(led_cdev->dev, &dev_attr_trigger);
- write_lock(&led_cdev->trigger_lock);
+ down_write(&led_cdev->trigger_lock);
if (led_cdev->trigger)
led_trigger_set(led_cdev, NULL);
- write_unlock(&led_cdev->trigger_lock);
+ up_write(&led_cdev->trigger_lock);
#endif
device_unregister(led_cdev->dev);
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/timer.h>
+#include <linux/rwsem.h>
#include <linux/leds.h>
#include "leds.h"
/*
* Nests outside led_cdev->trigger_lock
*/
-static DEFINE_RWLOCK(triggers_list_lock);
+static DECLARE_RWSEM(triggers_list_lock);
static LIST_HEAD(trigger_list);
ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
trigger_name[len - 1] = '\0';
if (!strcmp(trigger_name, "none")) {
- write_lock(&led_cdev->trigger_lock);
+ down_write(&led_cdev->trigger_lock);
led_trigger_set(led_cdev, NULL);
- write_unlock(&led_cdev->trigger_lock);
+ up_write(&led_cdev->trigger_lock);
return count;
}
- read_lock(&triggers_list_lock);
+ down_read(&triggers_list_lock);
list_for_each_entry(trig, &trigger_list, next_trig) {
if (!strcmp(trigger_name, trig->name)) {
- write_lock(&led_cdev->trigger_lock);
+ down_write(&led_cdev->trigger_lock);
led_trigger_set(led_cdev, trig);
- write_unlock(&led_cdev->trigger_lock);
+ up_write(&led_cdev->trigger_lock);
- read_unlock(&triggers_list_lock);
+ up_read(&triggers_list_lock);
return count;
}
}
- read_unlock(&triggers_list_lock);
+ up_read(&triggers_list_lock);
return -EINVAL;
}
struct led_trigger *trig;
int len = 0;
- read_lock(&triggers_list_lock);
- read_lock(&led_cdev->trigger_lock);
+ down_read(&triggers_list_lock);
+ down_read(&led_cdev->trigger_lock);
if (!led_cdev->trigger)
len += sprintf(buf+len, "[none] ");
else
len += sprintf(buf+len, "%s ", trig->name);
}
- read_unlock(&led_cdev->trigger_lock);
- read_unlock(&triggers_list_lock);
+ up_read(&led_cdev->trigger_lock);
+ up_read(&triggers_list_lock);
len += sprintf(len+buf, "\n");
return len;
if (!led_cdev->default_trigger)
return;
- read_lock(&triggers_list_lock);
- write_lock(&led_cdev->trigger_lock);
+ down_read(&triggers_list_lock);
+ down_write(&led_cdev->trigger_lock);
list_for_each_entry(trig, &trigger_list, next_trig) {
if (!strcmp(led_cdev->default_trigger, trig->name))
led_trigger_set(led_cdev, trig);
}
- write_unlock(&led_cdev->trigger_lock);
- read_unlock(&triggers_list_lock);
+ up_write(&led_cdev->trigger_lock);
+ up_read(&triggers_list_lock);
}
int led_trigger_register(struct led_trigger *trigger)
INIT_LIST_HEAD(&trigger->led_cdevs);
/* Add to the list of led triggers */
- write_lock(&triggers_list_lock);
+ down_write(&triggers_list_lock);
list_add_tail(&trigger->next_trig, &trigger_list);
- write_unlock(&triggers_list_lock);
+ up_write(&triggers_list_lock);
/* Register with any LEDs that have this as a default trigger */
read_lock(&leds_list_lock);
list_for_each_entry(led_cdev, &leds_list, node) {
- write_lock(&led_cdev->trigger_lock);
+ down_write(&led_cdev->trigger_lock);
if (!led_cdev->trigger && led_cdev->default_trigger &&
!strcmp(led_cdev->default_trigger, trigger->name))
led_trigger_set(led_cdev, trigger);
- write_unlock(&led_cdev->trigger_lock);
+ up_write(&led_cdev->trigger_lock);
}
read_unlock(&leds_list_lock);
struct led_classdev *led_cdev;
/* Remove from the list of led triggers */
- write_lock(&triggers_list_lock);
+ down_write(&triggers_list_lock);
list_del(&trigger->next_trig);
- write_unlock(&triggers_list_lock);
+ up_write(&triggers_list_lock);
/* Remove anyone actively using this trigger */
read_lock(&leds_list_lock);
list_for_each_entry(led_cdev, &leds_list, node) {
- write_lock(&led_cdev->trigger_lock);
+ down_write(&led_cdev->trigger_lock);
if (led_cdev->trigger == trigger)
led_trigger_set(led_cdev, NULL);
- write_unlock(&led_cdev->trigger_lock);
+ up_write(&led_cdev->trigger_lock);
}
read_unlock(&leds_list_lock);
}
{
struct lguest_vq_info *lvq = vq->priv;
+ /* Release the interrupt */
+ free_irq(lvq->config.irq, vq);
/* Tell virtio_ring.c to free the virtqueue. */
vring_del_virtqueue(vq);
/* Unmap the pages containing the ring. */
DEB_D(("VIDIOCGMBUF \n"));
q = &fh->video_q;
- mutex_lock(&q->lock);
err = videobuf_mmap_setup(q,gbuffers,gbufsize,
V4L2_MEMORY_MMAP);
- if (err < 0) {
- mutex_unlock(&q->lock);
+ if (err < 0)
return err;
- }
gbuffers = err;
memset(mbuf,0,sizeof(*mbuf));
mbuf->size = gbuffers * gbufsize;
for (i = 0; i < gbuffers; i++)
mbuf->offsets[i] = i * gbufsize;
- mutex_unlock(&q->lock);
return 0;
}
#endif
err = saa7146_stop_preview(fh);
}
- // release all capture buffers
- mutex_lock(&q->lock);
- videobuf_read_stop(q);
- mutex_unlock(&q->lock);
+ videobuf_stop(q);
/* hmm, why is this function declared void? */
/* return err */
obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+# due to tuner-xc3028
+EXTRA_CFLAGS += -Idrivers/media/video
+
.agc2_slope2 = 0x1e,
};
+#if defined(CONFIG_DVB_DIB3000MC) || \
+ (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
+
static struct dib3000mc_config mod3000p_dib3000p_config = {
&dib3000p_panasonic_agc_config,
return 0;
}
EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
+#endif
/*
* common remote control stuff
tda10086_write_byte(state, 0x3d, 0x80);
// setup SEC
- tda10086_write_byte(state, 0x36, 0x00); // all SEC off
+ tda10086_write_byte(state, 0x36, 0x80); // all SEC off, no 22k tone
tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency
tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // }
dprintk ("%s\n", __FUNCTION__);
- switch(tone) {
+ switch (tone) {
case SEC_TONE_OFF:
- tda10086_write_byte(state, 0x36, 0x00);
+ tda10086_write_byte(state, 0x36, 0x80);
break;
case SEC_TONE_ON:
- tda10086_write_byte(state, 0x36, 0x01);
+ tda10086_write_byte(state, 0x36, 0x81);
break;
}
for(i=0; i< cmd->msg_len; i++) {
tda10086_write_byte(state, 0x48+i, cmd->msg[i]);
}
- tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len - 1) << 4));
+ tda10086_write_byte(state, 0x36, 0x88 | ((cmd->msg_len - 1) << 4));
tda10086_diseqc_wait(state);
switch(minicmd) {
case SEC_MINI_A:
- tda10086_write_byte(state, 0x36, 0x04);
+ tda10086_write_byte(state, 0x36, 0x84);
break;
case SEC_MINI_B:
- tda10086_write_byte(state, 0x36, 0x06);
+ tda10086_write_byte(state, 0x36, 0x86);
break;
}
enum fe_bandwidth bandwidth,
u16 *nominal_rate)
{
- u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */
+ u32 adc_clock = 45056; /* 45.056 MHz */
u8 bw;
struct zl10353_state *state = fe->demodulator_priv;
break;
}
- *nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4;
+ *nominal_rate = (bw * (1 << 23) / 7 * 125 + adc_clock / 2) / adc_clock;
dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
__FUNCTION__, bw, adc_clock, *nominal_rate);
u8 demod_address;
/* frequencies in kHz */
- int adc_clock; // default: 22528
+ int adc_clock; /* default: 45056 */
/* set if no pll is connected to the secondary i2c bus */
int no_tuner;
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
-void __devinit bttv_check_chipset(void)
+void __init bttv_check_chipset(void)
{
int pcipci_fail = 0;
struct pci_dev *dev = NULL;
/* stop vbi capture */
if (check_btres(fh, RESOURCE_VBI)) {
- if (fh->vbi.streaming)
- videobuf_streamoff(&fh->vbi);
- if (fh->vbi.reading)
- videobuf_read_stop(&fh->vbi);
+ videobuf_stop(&fh->vbi);
free_btres(btv,fh,RESOURCE_VBI);
}
#endif
};
-static int bttv_init_module(void)
+static int __init bttv_init_module(void)
{
int ret;
return pci_register_driver(&bttv_pci_driver);
}
-static void bttv_cleanup_module(void)
+static void __exit bttv_cleanup_module(void)
{
pci_unregister_driver(&bttv_pci_driver);
bus_unregister(&bttv_sub_bus_type);
cx8802_cancel_buffers(fh->dev);
/* stop mpeg capture */
- if (fh->mpegq.streaming)
- videobuf_streamoff(&fh->mpegq);
- if (fh->mpegq.reading)
- videobuf_read_stop(&fh->mpegq);
+ videobuf_stop(&fh->mpegq);
videobuf_mmap_free(&fh->mpegq);
file->private_data = NULL;
/* stop vbi capture */
if (res_check(fh, RESOURCE_VBI)) {
- if (fh->vbiq.streaming)
- videobuf_streamoff(&fh->vbiq);
- if (fh->vbiq.reading)
- videobuf_read_stop(&fh->vbiq);
+ videobuf_stop(&fh->vbiq);
res_free(dev,fh,RESOURCE_VBI);
}
{
/* Sets I2C speed to 100 KHz */
- em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
+ if (!dev->is_em2800)
+ em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
/* enable vbi capturing */
{
/* NOTE: buffers are not freed here */
struct em28xx_frame_t *f = vma->vm_private_data;
- f->vma_use_count--;
+
+ if (f->vma_use_count)
+ f->vma_use_count--;
}
static struct vm_operations_struct em28xx_vm_ops = {
}
/* init + register i2c algo-bit adapter */
-int __devinit init_ivtv_i2c(struct ivtv *itv)
+int init_ivtv_i2c(struct ivtv *itv)
{
IVTV_DEBUG_I2C("i2c init\n");
void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg);
/* init + register i2c algo-bit adapter */
-int __devinit init_ivtv_i2c(struct ivtv *itv);
+int init_ivtv_i2c(struct ivtv *itv);
void exit_ivtv_i2c(struct ivtv *itv);
#endif
int minor_offset;
int dma, pio;
enum v4l2_buf_type buf_type;
- struct file_operations *fops;
+ const struct file_operations *fops;
} ivtv_stream_info[] = {
{ /* IVTV_ENC_STREAM_TYPE_MPG */
"encoder MPG",
{
unsigned char buf[64];
int v;
- int ct=0;
+ int ct = 0;
va_list argp;
- va_start(argp,t);
+ va_start(argp, t);
- while((v=va_arg(argp,int))!=-1)
- buf[ct++]=v;
+ while ((v = va_arg(argp, int)) != -1)
+ buf[ct++] = v;
+
+ va_end(argp);
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
}
{
unsigned char buf[64];
int v;
- int ct=0;
+ int ct = 0;
va_list argp;
va_start(argp,t);
- while((v=va_arg(argp,int))!=-1)
- buf[ct++]=v;
+ while ((v = va_arg(argp, int)) != -1)
+ buf[ct++] = v;
+
+ va_end(argp);
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
}
if (report & SAA7134_IRQ_REPORT_DONE_RA3) {
handled = 1;
- saa_writel(SAA7134_IRQ_REPORT,report);
+ saa_writel(SAA7134_IRQ_REPORT,
+ SAA7134_IRQ_REPORT_DONE_RA3);
saa7134_irq_alsa_done(dev, status);
} else {
goto out;
.buffer_bytes_max = (256*1024),
.period_bytes_min = 64,
.period_bytes_max = (256*1024),
- .periods_min = 2,
+ .periods_min = 4,
.periods_max = 1024,
};
snd_assert(period_size >= 0x100 && period_size <= 0x10000,
return -EINVAL);
- snd_assert(periods >= 2, return -EINVAL);
+ snd_assert(periods >= 4, return -EINVAL);
snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL);
dev = saa7134->dev;
saa7134_tvaudio_setmute(dev);
}
- if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+ err = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (err < 0)
+ return err;
+
+ err = snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIODS, 2);
+ if (err < 0)
return err;
return 0;
.tv = 1,
},{
.name = name_comp1,
- .vmux = 2,
+ .vmux = 0,
.amux = LINE1,
},{
.name = name_comp2,
for (loop = 0; loop < 10; loop++) {
report = saa_readl(SAA7134_IRQ_REPORT);
status = saa_readl(SAA7134_IRQ_STATUS);
- if (0 == report) {
- if (irq_debug > 1)
- printk(KERN_DEBUG "%s/irq: no (more) work\n",
- dev->name);
- goto out;
- }
-
- /* If dmasound support is active and we get a sound report, exit
- and let the saa7134-alsa/oss module deal with it */
+ /* If dmasound support is active and we get a sound report,
+ * mask out the report and let the saa7134-alsa module deal
+ * with it */
if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
(dev->dmasound.priv_data != NULL) )
{
if (irq_debug > 1)
- printk(KERN_DEBUG "%s/irq: ignoring interrupt for DMA sound\n",
+ printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
+ dev->name);
+ report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
+ }
+
+ if (0 == report) {
+ if (irq_debug > 1)
+ printk(KERN_DEBUG "%s/irq: no (more) work\n",
dev->name);
goto out;
}
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
+ .tuner_config = 1,
.request_firmware = philips_tda1004x_request_firmware
};
{
struct saa7134_dev *dev = file->private_data;
- if (dev->empress_tsq.streaming)
- videobuf_streamoff(&dev->empress_tsq);
mutex_lock(&dev->empress_tsq.lock);
- if (dev->empress_tsq.reading)
- videobuf_read_stop(&dev->empress_tsq);
+ videobuf_stop(&dev->empress_tsq);
videobuf_mmap_free(&dev->empress_tsq);
dev->empress_users--;
/* stop vbi capture */
if (res_check(fh, RESOURCE_VBI)) {
- if (fh->vbi.streaming)
- videobuf_streamoff(&fh->vbi);
- if (fh->vbi.reading)
- videobuf_read_stop(&fh->vbi);
+ videobuf_stop(&fh->vbi);
res_free(dev,fh,RESOURCE_VBI);
}
int opmode=0;
struct tvp5150 *decoder = i2c_get_clientdata(c);
int input = 0;
+ unsigned char val;
if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable)
input = 8;
tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode);
tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
+
+ /* Svideo should enable YCrCb output and disable GPCL output
+ * For Composite and TV, it should be the reverse
+ */
+ val = tvp5150_read(c, TVP5150_MISC_CTL);
+ if (decoder->route.input == TVP5150_SVIDEO)
+ val = (val & ~0x40) | 0x10;
+ else
+ val = (val & ~0x10) | 0x40;
+ tvp5150_write(c, TVP5150_MISC_CTL, val);
};
struct i2c_reg_value {
INIT_LIST_HEAD(&q->stream);
}
+/* Locking: Only usage in bttv unsafe find way to remove */
int videobuf_queue_is_busy(struct videobuf_queue *q)
{
int i;
return 0;
}
+/* Locking: Caller holds q->lock */
void videobuf_queue_cancel(struct videobuf_queue *q)
{
unsigned long flags=0;
/* --------------------------------------------------------------------- */
+/* Locking: Caller holds q->lock */
enum v4l2_field videobuf_next_field(struct videobuf_queue *q)
{
enum v4l2_field field = q->field;
return field;
}
+/* Locking: Caller holds q->lock */
static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b,
struct videobuf_buffer *vb, enum v4l2_buf_type type)
{
b->sequence = vb->field_count >> 1;
}
+/* Locking: Caller holds q->lock */
+static int __videobuf_mmap_free(struct videobuf_queue *q)
+{
+ int i;
+ int rc;
+
+ if (!q)
+ return 0;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ rc = CALL(q,mmap_free,q);
+ if (rc<0)
+ return rc;
+
+ for (i = 0; i < VIDEO_MAX_FRAME; i++) {
+ if (NULL == q->bufs[i])
+ continue;
+ q->ops->buf_release(q,q->bufs[i]);
+ kfree(q->bufs[i]);
+ q->bufs[i] = NULL;
+ }
+
+ return rc;
+}
+
+int videobuf_mmap_free(struct videobuf_queue *q)
+{
+ int ret;
+ mutex_lock(&q->lock);
+ ret = __videobuf_mmap_free(q);
+ mutex_unlock(&q->lock);
+ return ret;
+}
+
+/* Locking: Caller holds q->lock */
+static int __videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory)
+{
+ unsigned int i;
+ int err;
+
+ MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
+
+ err = __videobuf_mmap_free(q);
+ if (0 != err)
+ return err;
+
+ /* Allocate and initialize buffers */
+ for (i = 0; i < bcount; i++) {
+ q->bufs[i] = videobuf_alloc(q);
+
+ if (q->bufs[i] == NULL)
+ break;
+
+ q->bufs[i]->i = i;
+ q->bufs[i]->input = UNSET;
+ q->bufs[i]->memory = memory;
+ q->bufs[i]->bsize = bsize;
+ switch (memory) {
+ case V4L2_MEMORY_MMAP:
+ q->bufs[i]->boff = bsize * i;
+ break;
+ case V4L2_MEMORY_USERPTR:
+ case V4L2_MEMORY_OVERLAY:
+ /* nothing */
+ break;
+ }
+ }
+
+ if (!i)
+ return -ENOMEM;
+
+ dprintk(1,"mmap setup: %d buffers, %d bytes each\n",
+ i, bsize);
+
+ return i;
+}
+
+int videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory)
+{
+ int ret;
+ mutex_lock(&q->lock);
+ ret = __videobuf_mmap_setup(q, bcount, bsize, memory);
+ mutex_unlock(&q->lock);
+ return ret;
+}
+
int videobuf_reqbufs(struct videobuf_queue *q,
struct v4l2_requestbuffers *req)
{
unsigned int size,count;
int retval;
- if (req->type != q->type) {
- dprintk(1,"reqbufs: queue type invalid\n");
- return -EINVAL;
- }
if (req->count < 1) {
dprintk(1,"reqbufs: count invalid (%d)\n",req->count);
return -EINVAL;
}
+
if (req->memory != V4L2_MEMORY_MMAP &&
req->memory != V4L2_MEMORY_USERPTR &&
req->memory != V4L2_MEMORY_OVERLAY) {
}
mutex_lock(&q->lock);
+ if (req->type != q->type) {
+ dprintk(1,"reqbufs: queue type invalid\n");
+ retval = -EINVAL;
+ goto done;
+ }
+
if (q->streaming) {
dprintk(1,"reqbufs: streaming already exists\n");
retval = -EBUSY;
dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n",
count, size, (count*size)>>PAGE_SHIFT);
- retval = videobuf_mmap_setup(q,count,size,req->memory);
+ retval = __videobuf_mmap_setup(q,count,size,req->memory);
if (retval < 0) {
dprintk(1,"reqbufs: mmap setup returned %d\n",retval);
goto done;
int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b)
{
+ int ret = -EINVAL;
+
+ mutex_lock(&q->lock);
if (unlikely(b->type != q->type)) {
dprintk(1,"querybuf: Wrong type.\n");
- return -EINVAL;
+ goto done;
}
if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) {
dprintk(1,"querybuf: index out of range.\n");
- return -EINVAL;
+ goto done;
}
if (unlikely(NULL == q->bufs[b->index])) {
dprintk(1,"querybuf: buffer is null.\n");
- return -EINVAL;
+ goto done;
}
+
videobuf_status(q,b,q->bufs[b->index],q->type);
- return 0;
+
+ ret = 0;
+done:
+ mutex_unlock(&q->lock);
+ return ret;
}
int videobuf_qbuf(struct videobuf_queue *q,
return retval;
}
-int videobuf_streamoff(struct videobuf_queue *q)
+/* Locking: Caller holds q->lock */
+static int __videobuf_streamoff(struct videobuf_queue *q)
{
- int retval = -EINVAL;
-
- mutex_lock(&q->lock);
if (!q->streaming)
- goto done;
+ return -EINVAL;
+
videobuf_queue_cancel(q);
q->streaming = 0;
- retval = 0;
- done:
+ return 0;
+}
+
+int videobuf_streamoff(struct videobuf_queue *q)
+{
+ int retval;
+
+ mutex_lock(&q->lock);
+ retval = __videobuf_streamoff(q);
mutex_unlock(&q->lock);
+
return retval;
}
+/* Locking: Caller holds q->lock */
static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q,
char __user *data,
size_t count, loff_t *ppos)
return retval;
}
-int videobuf_read_start(struct videobuf_queue *q)
+/* Locking: Caller holds q->lock */
+int __videobuf_read_start(struct videobuf_queue *q)
{
enum v4l2_field field;
unsigned long flags=0;
count = VIDEO_MAX_FRAME;
size = PAGE_ALIGN(size);
- err = videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR);
+ err = __videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR);
if (err < 0)
return err;
return 0;
}
-void videobuf_read_stop(struct videobuf_queue *q)
+static void __videobuf_read_stop(struct videobuf_queue *q)
{
int i;
+
videobuf_queue_cancel(q);
- videobuf_mmap_free(q);
+ __videobuf_mmap_free(q);
INIT_LIST_HEAD(&q->stream);
for (i = 0; i < VIDEO_MAX_FRAME; i++) {
if (NULL == q->bufs[i])
}
q->read_buf = NULL;
q->reading = 0;
+
}
+int videobuf_read_start(struct videobuf_queue *q)
+{
+ int rc;
+
+ mutex_lock(&q->lock);
+ rc = __videobuf_read_start(q);
+ mutex_unlock(&q->lock);
+
+ return rc;
+}
+
+void videobuf_read_stop(struct videobuf_queue *q)
+{
+ mutex_lock(&q->lock);
+ __videobuf_read_stop(q);
+ mutex_unlock(&q->lock);
+}
+
+void videobuf_stop(struct videobuf_queue *q)
+{
+ mutex_lock(&q->lock);
+
+ if (q->streaming)
+ __videobuf_streamoff(q);
+
+ if (q->reading)
+ __videobuf_read_stop(q);
+
+ mutex_unlock(&q->lock);
+}
+
+
ssize_t videobuf_read_stream(struct videobuf_queue *q,
char __user *data, size_t count, loff_t *ppos,
int vbihack, int nonblocking)
return rc;
}
-int videobuf_mmap_setup(struct videobuf_queue *q,
- unsigned int bcount, unsigned int bsize,
- enum v4l2_memory memory)
-{
- unsigned int i;
- int err;
-
- MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
-
- err = videobuf_mmap_free(q);
- if (0 != err)
- return err;
-
- /* Allocate and initialize buffers */
- for (i = 0; i < bcount; i++) {
- q->bufs[i] = videobuf_alloc(q);
-
- if (q->bufs[i] == NULL)
- break;
-
- q->bufs[i]->i = i;
- q->bufs[i]->input = UNSET;
- q->bufs[i]->memory = memory;
- q->bufs[i]->bsize = bsize;
- switch (memory) {
- case V4L2_MEMORY_MMAP:
- q->bufs[i]->boff = bsize * i;
- break;
- case V4L2_MEMORY_USERPTR:
- case V4L2_MEMORY_OVERLAY:
- /* nothing */
- break;
- }
- }
-
- if (!i)
- return -ENOMEM;
-
- dprintk(1,"mmap setup: %d buffers, %d bytes each\n",
- i, bsize);
-
- return i;
-}
-
-int videobuf_mmap_free(struct videobuf_queue *q)
-{
- int i;
- int rc;
-
- if (!q)
- return 0;
-
- MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS);
-
- rc = CALL(q,mmap_free,q);
- if (rc<0)
- return rc;
-
- for (i = 0; i < VIDEO_MAX_FRAME; i++) {
- if (NULL == q->bufs[i])
- continue;
- q->ops->buf_release(q,q->bufs[i]);
- kfree(q->bufs[i]);
- q->bufs[i] = NULL;
- }
-
- return rc;
-}
-
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma)
{
EXPORT_SYMBOL_GPL(videobuf_read_start);
EXPORT_SYMBOL_GPL(videobuf_read_stop);
+EXPORT_SYMBOL_GPL(videobuf_stop);
EXPORT_SYMBOL_GPL(videobuf_read_stream);
EXPORT_SYMBOL_GPL(videobuf_read_one);
EXPORT_SYMBOL_GPL(videobuf_poll_stream);
{
struct videobuf_mapping *map = vma->vm_private_data;
- dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map,
+ dprintk(2,"vm_open %p [count=%u,vma=%08lx-%08lx]\n",map,
map->count,vma->vm_start,vma->vm_end);
map->count++;
struct videobuf_queue *q = map->q;
int i;
- dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map,
+ dprintk(2,"vm_close %p [count=%u,vma=%08lx-%08lx]\n",map,
map->count,vma->vm_start,vma->vm_end);
map->count--;
}
/* create mapping + update buffer list */
- map = q->bufs[first]->map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
+ map = q->bufs[first]->map = kzalloc(sizeof(struct videobuf_mapping),GFP_KERNEL);
if (NULL == map)
return -ENOMEM;
int minor = iminor(inode);
vivi_stop_thread(vidq);
+ videobuf_stop(&fh->vb_vidq);
videobuf_mmap_free(&fh->vb_vidq);
kfree (fh);
dev_dbg(sm->dev, "PM0[%c]: "
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
-x "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+ "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
(pmc & 3 ) == 0 ? '*' : '-',
fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)),
fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)),
dprintk("unknown input event %.2x\n", event);
}
-static int sony_laptop_setup_input(void)
+static int sony_laptop_setup_input(struct acpi_device *acpi_device)
{
struct input_dev *jog_dev;
struct input_dev *key_dev;
key_dev->name = "Sony Vaio Keys";
key_dev->id.bustype = BUS_ISA;
key_dev->id.vendor = PCI_VENDOR_ID_SONY;
+ key_dev->dev.parent = &acpi_device->dev;
/* Initialize the Input Drivers: special keys */
set_bit(EV_KEY, key_dev->evbit);
jog_dev->name = "Sony Vaio Jogdial";
jog_dev->id.bustype = BUS_ISA;
jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
+ key_dev->dev.parent = &acpi_device->dev;
jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE);
}
/* setup input devices and helper fifo */
- result = sony_laptop_setup_input();
+ result = sony_laptop_setup_input(device);
if (result) {
printk(KERN_ERR DRV_PFX
"Unabe to create input devices.\n");
sony_backlight_device->props.brightness =
sony_backlight_get_brightness
(sony_backlight_device);
- sony_backlight_device->props.max_brightness =
+ sony_backlight_device->props.max_brightness =
SONY_MAX_BRIGHTNESS - 1;
}
}
/* setup input devices and helper fifo */
- result = sony_laptop_setup_input();
+ result = sony_laptop_setup_input(device);
if (result) {
printk(KERN_ERR DRV_PFX
"Unabe to create input devices.\n");
* 02110-1301, USA.
*/
-#define IBM_VERSION "0.16"
+#define IBM_VERSION "0.17"
#define TPACPI_SYSFS_VERSION 0x020000
/*
KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
- KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */
+ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
/* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
- KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */
+ KEY_RESERVED, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
- KEY_VOLUMEUP, /* 0x14: VOLUME UP */
- KEY_VOLUMEDOWN, /* 0x15: VOLUME DOWN */
- KEY_MUTE, /* 0x16: MUTE */
+ KEY_RESERVED, /* 0x14: VOLUME UP */
+ KEY_RESERVED, /* 0x15: VOLUME DOWN */
+ KEY_RESERVED, /* 0x16: MUTE */
KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
- KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */
+ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
/* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
- KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */
+ KEY_RESERVED, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
- KEY_VOLUMEUP, /* 0x14: VOLUME UP */
- KEY_VOLUMEDOWN, /* 0x15: VOLUME DOWN */
- KEY_MUTE, /* 0x16: MUTE */
+ KEY_RESERVED, /* 0x14: VOLUME UP */
+ KEY_RESERVED, /* 0x15: VOLUME DOWN */
+ KEY_RESERVED, /* 0x16: MUTE */
KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
return len;
}
- res = mutex_lock_interruptible(&hotkey_mutex);
- if (res < 0)
- return res;
+ if (mutex_lock_interruptible(&hotkey_mutex))
+ return -ERESTARTSYS;
res = hotkey_get(&status, &mask);
mutex_unlock(&hotkey_mutex);
if (res)
if (!tp_features.hotkey)
return -ENODEV;
- res = mutex_lock_interruptible(&hotkey_mutex);
- if (res < 0)
- return res;
+ if (mutex_lock_interruptible(&hotkey_mutex))
+ return -ERESTARTSYS;
res = hotkey_get(&status, &mask);
if (res)
static struct mutex brightness_mutex;
+static int __init tpacpi_query_bcll_levels(acpi_handle handle)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ int rc;
+
+ if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
+ obj = (union acpi_object *)buffer.pointer;
+ if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
+ printk(IBM_ERR "Unknown BCLL data, "
+ "please report this to %s\n", IBM_MAIL);
+ rc = 0;
+ } else {
+ rc = obj->package.count;
+ }
+ } else {
+ return 0;
+ }
+
+ kfree(buffer.pointer);
+ return rc;
+}
+
+static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
+{
+ char name[ACPI_PATH_SEGMENT_LENGTH];
+ struct acpi_buffer buffer = { sizeof(name), &name };
+
+ if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
+ !strncmp("BCLL", name, sizeof(name) - 1)) {
+ if (tpacpi_query_bcll_levels(handle) == 16) {
+ *rv = handle;
+ return AE_CTRL_TERMINATE;
+ } else {
+ return AE_OK;
+ }
+ } else {
+ return AE_OK;
+ }
+}
+
+static int __init brightness_check_levels(void)
+{
+ int status;
+ void *found_node = NULL;
+
+ if (!vid_handle) {
+ IBM_ACPIHANDLE_INIT(vid);
+ }
+ if (!vid_handle)
+ return 0;
+
+ /* Search for a BCLL package with 16 levels */
+ status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3,
+ brightness_find_bcll, NULL, &found_node);
+
+ return (ACPI_SUCCESS(status) && found_node != NULL);
+}
+
+static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
+{
+ char name[ACPI_PATH_SEGMENT_LENGTH];
+ struct acpi_buffer buffer = { sizeof(name), &name };
+
+ if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
+ !strncmp("_BCL", name, sizeof(name) - 1)) {
+ *rv = handle;
+ return AE_CTRL_TERMINATE;
+ } else {
+ return AE_OK;
+ }
+}
+
+static int __init brightness_check_std_acpi_support(void)
+{
+ int status;
+ void *found_node = NULL;
+
+ if (!vid_handle) {
+ IBM_ACPIHANDLE_INIT(vid);
+ }
+ if (!vid_handle)
+ return 0;
+
+ /* Search for a _BCL method, but don't execute it */
+ status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
+ brightness_find_bcl, NULL, &found_node);
+
+ return (ACPI_SUCCESS(status) && found_node != NULL);
+}
+
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
mutex_init(&brightness_mutex);
+ if (!brightness_enable) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "brightness support disabled by module parameter\n");
+ return 1;
+ } else if (brightness_enable > 1) {
+ if (brightness_check_std_acpi_support()) {
+ printk(IBM_NOTICE
+ "standard ACPI backlight interface available, not loading native one...\n");
+ return 1;
+ }
+ }
+
if (!brightness_mode) {
if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO)
brightness_mode = 2;
if (brightness_mode > 3)
return -EINVAL;
+ tp_features.bright_16levels =
+ thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO &&
+ brightness_check_levels();
+
b = brightness_get(NULL);
if (b < 0)
return 1;
+ if (tp_features.bright_16levels)
+ printk(IBM_INFO "detected a 16-level brightness capable ThinkPad\n");
+
ibm_backlight_device = backlight_device_register(
TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
&ibm_backlight_data);
}
vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n");
- ibm_backlight_device->props.max_brightness = 7;
+ ibm_backlight_device->props.max_brightness =
+ (tp_features.bright_16levels)? 15 : 7;
ibm_backlight_device->props.brightness = b;
backlight_update_status(ibm_backlight_device);
static int brightness_update_status(struct backlight_device *bd)
{
+ /* it is the backlight class's job (caller) to handle
+ * EINTR and other errors properly */
return brightness_set(
(bd->props.fb_blank == FB_BLANK_UNBLANK &&
bd->props.power == FB_BLANK_UNBLANK) ?
if (brightness_mode & 1) {
if (!acpi_ec_read(brightness_offset, &lec))
return -EIO;
- lec &= 7;
+ lec &= (tp_features.bright_16levels)? 0x0f : 0x07;
level = lec;
};
if (brightness_mode & 2) {
lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS)
& TP_NVRAM_MASK_LEVEL_BRIGHTNESS)
>> TP_NVRAM_POS_LEVEL_BRIGHTNESS;
+ lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07;
level = lcmos;
}
return level;
}
+/* May return EINTR which can always be mapped to ERESTARTSYS */
static int brightness_set(int value)
{
int cmos_cmd, inc, i, res;
int current_value;
- if (value > 7)
+ if (value > ((tp_features.bright_16levels)? 15 : 7))
return -EINVAL;
res = mutex_lock_interruptible(&brightness_mutex);
cmos_cmd = value > current_value ?
TP_CMOS_BRIGHTNESS_UP :
TP_CMOS_BRIGHTNESS_DOWN;
- inc = value > current_value ? 1 : -1;
+ inc = (value > current_value)? 1 : -1;
res = 0;
for (i = current_value; i != value; i += inc) {
if ((level = brightness_get(NULL)) < 0) {
len += sprintf(p + len, "level:\t\tunreadable\n");
} else {
- len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
+ len += sprintf(p + len, "level:\t\t%d\n", level);
len += sprintf(p + len, "commands:\tup, down\n");
len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-7)\n");
+ " (<level> is 0-%d)\n",
+ (tp_features.bright_16levels) ? 15 : 7);
}
return len;
static int brightness_write(char *buf)
{
int level;
- int new_level;
+ int rc;
char *cmd;
+ int max_level = (tp_features.bright_16levels) ? 15 : 7;
- while ((cmd = next_cmd(&buf))) {
- if ((level = brightness_get(NULL)) < 0)
- return level;
- level &= 7;
+ level = brightness_get(NULL);
+ if (level < 0)
+ return level;
+ while ((cmd = next_cmd(&buf))) {
if (strlencmp(cmd, "up") == 0) {
- new_level = level == 7 ? 7 : level + 1;
+ if (level < max_level)
+ level++;
} else if (strlencmp(cmd, "down") == 0) {
- new_level = level == 0 ? 0 : level - 1;
- } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
- new_level >= 0 && new_level <= 7) {
- /* new_level set */
+ if (level > 0)
+ level--;
+ } else if (sscanf(cmd, "level %d", &level) == 1 &&
+ level >= 0 && level <= max_level) {
+ /* new level set */
} else
return -EINVAL;
-
- brightness_set(new_level);
}
- return 0;
+ /*
+ * Now we know what the final level should be, so we try to set it.
+ * Doing it this way makes the syscall restartable in case of EINTR
+ */
+ rc = brightness_set(level);
+ return (rc == -EINTR)? ERESTARTSYS : rc;
}
static struct ibm_struct brightness_driver_data = {
/* scale down from 0-255 to 0-7 */
newlevel = (s >> 5) & 0x07;
- rc = mutex_lock_interruptible(&fan_mutex);
- if (rc < 0)
- return rc;
+ if (mutex_lock_interruptible(&fan_mutex))
+ return -ERESTARTSYS;
rc = fan_get_status(&status);
if (!rc && (status &
int rc;
u8 s;
- rc = mutex_lock_interruptible(&fan_mutex);
- if (rc < 0)
- return rc;
+ if (mutex_lock_interruptible(&fan_mutex))
+ return -ERESTARTSYS;
rc = fan_get_status(&s);
if (!rc)
fan_update_desired_level(s);
if (!fan_control_allowed)
return -EPERM;
- rc = mutex_lock_interruptible(&fan_mutex);
- if (rc < 0)
- return rc;
+ if (mutex_lock_interruptible(&fan_mutex))
+ return -ERESTARTSYS;
if (level == TPACPI_FAN_LAST_LEVEL)
level = fan_control_desired_level;
if (!fan_control_allowed)
return -EPERM;
- rc = mutex_lock_interruptible(&fan_mutex);
- if (rc < 0)
- return rc;
+ if (mutex_lock_interruptible(&fan_mutex))
+ return -ERESTARTSYS;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_FANS:
if (!fan_control_allowed)
return -EPERM;
- rc = mutex_lock_interruptible(&fan_mutex);
- if (rc < 0)
- return rc;
+ if (mutex_lock_interruptible(&fan_mutex))
+ return -ERESTARTSYS;
rc = 0;
switch (fan_control_access_mode) {
if (!fan_control_allowed)
return -EPERM;
- rc = mutex_lock_interruptible(&fan_mutex);
- if (rc < 0)
- return rc;
+ if (mutex_lock_interruptible(&fan_mutex))
+ return -ERESTARTSYS;
rc = 0;
switch (fan_control_access_mode) {
unsigned int i;
struct ibm_struct *ibm;
+ if (!kp || !kp->name || !val)
+ return -EINVAL;
+
for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
ibm = ibms_init[i].data;
- BUG_ON(ibm == NULL);
+ WARN_ON(ibm == NULL);
+
+ if (!ibm || !ibm->name)
+ continue;
if (strcmp(ibm->name, kp->name) == 0 && ibm->write) {
if (strlen(val) > sizeof(ibms_init[i].param) - 2)
static int brightness_mode;
module_param_named(brightness_mode, brightness_mode, int, 0);
+static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */
+module_param(brightness_enable, uint, 0);
+
static unsigned int hotkey_report_mode;
module_param(hotkey_report_mode, uint, 0);
/* ThinkPad CMOS NVRAM constants */
#define TP_NVRAM_ADDR_BRIGHTNESS 0x5e
-#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07
+#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x0f
#define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
u32 hotkey_wlsw:1;
u32 light:1;
u32 light_status:1;
+ u32 bright_16levels:1;
u32 wan:1;
u32 fan_ctrl_status_undef:1;
u32 input_device_registered:1;
static struct backlight_device *ibm_backlight_device;
static int brightness_offset = 0x31;
static int brightness_mode;
+static unsigned int brightness_enable; /* 0 = no, 1 = yes, 2 = auto */
static int brightness_init(struct ibm_init_struct *iibm);
static void brightness_exit(void);
* max 8 partitions per card
*/
#define MMC_SHIFT 3
+#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
+
+static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
/*
* There is one mmc_blk_data per slot.
mutex_lock(&open_lock);
md->usage--;
if (md->usage == 0) {
+ int devidx = md->disk->first_minor >> MMC_SHIFT;
+ __clear_bit(devidx, dev_use);
+
put_disk(md->disk);
kfree(md);
}
req->rq_disk->disk_name, err);
goto cmd_err;
}
- } while (!(cmd.resp[0] & R1_READY_FOR_DATA));
+ /*
+ * Some cards mishandle the status bits,
+ * so make sure to check both the busy
+ * indication and the card state.
+ */
+ } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
+ (R1_CURRENT_STATE(cmd.resp[0]) == 7));
#if 0
if (cmd.resp[0] & ~0x00000900)
return 0;
}
-#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
-
-static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
static inline int mmc_blk_readonly(struct mmc_card *card)
{
struct mmc_blk_data *md = mmc_get_drvdata(card);
if (md) {
- int devidx;
-
/* Stop new requests from getting into the queue */
del_gendisk(md->disk);
/* Then flush out any already in there */
mmc_cleanup_queue(&md->queue);
- devidx = md->disk->first_minor >> MMC_SHIFT;
- __clear_bit(devidx, dev_use);
-
mmc_blk_put(md);
}
mmc_set_drvdata(card, NULL);
blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
- mq->sg = kzalloc(sizeof(struct scatterlist) *
+ mq->sg = kmalloc(sizeof(struct scatterlist) *
host->max_phys_segs, GFP_KERNEL);
if (!mq->sg) {
ret = -ENOMEM;
goto cleanup_queue;
}
+ sg_init_table(mq->sg, host->max_phys_segs);
}
init_MUTEX(&mq->thread_sem);
sdio_out(port, UART_IER, port->ier);
}
-static void sdio_uart_receive_chars(struct sdio_uart_port *port, int *status)
+static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status)
{
struct tty_struct *tty = port->tty;
unsigned int ch, flag;
DMA_FROM_DEVICE);
status = spi_sync(host->spi, &host->readback);
- if (status == 0)
- status = host->readback.status;
if (host->dma_dev)
dma_sync_single_for_cpu(host->dma_dev,
DMA_BIDIRECTIONAL);
}
status = spi_sync(host->spi, &host->m);
- if (status == 0)
- status = host->m.status;
if (host->dma_dev)
dma_sync_single_for_cpu(host->dma_dev,
DMA_BIDIRECTIONAL);
status = spi_sync(spi, &host->m);
- if (status == 0)
- status = host->m.status;
if (status != 0) {
dev_dbg(&spi->dev, "write error (%d)\n", status);
}
status = spi_sync(spi, &host->m);
- if (status == 0)
- status = host->m.status;
if (host->dma_dev) {
dma_sync_single_for_cpu(host->dma_dev,
DMA_BIDIRECTIONAL);
tmp = spi_sync(spi, &host->m);
- if (tmp == 0)
- tmp = host->m.status;
if (host->dma_dev)
dma_sync_single_for_cpu(host->dma_dev,
#include <linux/mmc/host.h>
#include <linux/highmem.h>
#include <linux/scatterlist.h>
-#include <linux/log2.h>
#include <asm/io.h>
#define DRIVER_NAME "tifm_sd"
goto err_out;
}
- if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
- sock->dev.bus_id, mrq->data->blksz);
- mrq->cmd->error = -EINVAL;
- goto err_out;
- }
-
host->cmd_flags = 0;
host->block_pos = 0;
host->sg_pos = 0;
+ if (mrq->data && !is_power_of_2(mrq->data->blksz))
+ host->no_dma = 1;
+ else
+ host->no_dma = no_dma ? 1 : 0;
+
if (r_data) {
tifm_sd_set_data_timeout(host, r_data);
: PCI_DMA_FROMDEVICE)) {
printk(KERN_ERR "%s : scatterlist map failed\n",
sock->dev.bus_id);
- spin_unlock_irqrestore(&sock->lock, flags);
+ mrq->cmd->error = -ENOMEM;
goto err_out;
}
host->sg_len = tifm_map_sg(sock, r_data->sg,
r_data->flags & MMC_DATA_WRITE
? PCI_DMA_TODEVICE
: PCI_DMA_FROMDEVICE);
- spin_unlock_irqrestore(&sock->lock, flags);
+ mrq->cmd->error = -ENOMEM;
goto err_out;
}
return -ENOMEM;
host = mmc_priv(mmc);
- host->no_dma = no_dma;
tifm_set_drvdata(sock, mmc);
host->dev = sock;
host->timeout_jiffies = msecs_to_jiffies(1000);
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
- depends on ARCH_PXA || SUPERH
+ depends on ARCH_PXA || SH_MAGIC_PANEL_R2
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
struct amd8111e_priv *lp = netdev_priv(dev);
netif_stop_queue(dev);
+#ifdef CONFIG_AMD8111E_NAPI
napi_disable(&lp->napi);
+#endif
spin_lock_irq(&lp->lock);
dev->name, dev))
return -EAGAIN;
+#ifdef CONFIG_AMD8111E_NAPI
napi_enable(&lp->napi);
+#endif
spin_lock_irq(&lp->lock);
if(amd8111e_restart(dev)){
spin_unlock_irq(&lp->lock);
+#ifdef CONFIG_AMD8111E_NAPI
napi_disable(&lp->napi);
+#endif
if (dev->irq)
free_irq(dev->irq, dev);
return -ENOMEM;
skb->protocol = eth_type_trans(skb, dev);
#if defined(BFIN_MAC_CSUM_OFFLOAD)
skb->csum = current_rx_ptr->status.ip_payload_csum;
- skb->ip_summed = CHECKSUM_PARTIAL;
+ skb->ip_summed = CHECKSUM_COMPLETE;
#endif
netif_rx(skb);
if (!is_valid_ether_addr(dev->dev_addr)) {
/* Grab the MAC from the board somehow - this is done in the
arch/blackfin/mach-bf537/boards/eth_mac.c */
- get_bf537_ether_addr(dev->dev_addr);
+ bfin_get_ether_addr(dev->dev_addr);
}
/* If still not valid, get a random one */
struct mii_bus mii_bus;
};
-extern void get_bf537_ether_addr(char *addr);
+extern void bfin_get_ether_addr(char *addr);
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.6.8"
-#define DRV_MODULE_RELDATE "October 17, 2007"
+#define DRV_MODULE_VERSION "1.6.9"
+#define DRV_MODULE_RELDATE "December 8, 2007"
#define RUN_AT(x) (jiffies + (x))
prod_bd->rx_bd_haddr_lo = cons_bd->rx_bd_haddr_lo;
}
+static inline u16
+bnx2_get_hw_rx_cons(struct bnx2 *bp)
+{
+ u16 cons = bp->status_blk->status_rx_quick_consumer_index0;
+
+ if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
+ cons++;
+ return cons;
+}
+
static int
bnx2_rx_int(struct bnx2 *bp, int budget)
{
- struct status_block *sblk = bp->status_blk;
u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
struct l2_fhdr *rx_hdr;
int rx_pkt = 0;
- hw_cons = bp->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
- if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) {
- hw_cons++;
- }
+ hw_cons = bnx2_get_hw_rx_cons(bp);
sw_cons = bp->rx_cons;
sw_prod = bp->rx_prod;
/* Refresh hw_cons to see if there is new work */
if (sw_cons == hw_cons) {
- hw_cons = bp->hw_rx_cons =
- sblk->status_rx_quick_consumer_index0;
- if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)
- hw_cons++;
+ hw_cons = bnx2_get_hw_rx_cons(bp);
rmb();
}
}
{
struct status_block *sblk = bp->status_blk;
- if ((sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) ||
+ if ((bnx2_get_hw_rx_cons(bp) != bp->rx_cons) ||
(sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons))
return 1;
if (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons)
bnx2_tx_int(bp);
- if (sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons)
+ if (bnx2_get_hw_rx_cons(bp) != bp->rx_cons)
work_done += bnx2_rx_int(bp, budget - work_done);
return work_done;
ring_prod = prod = bp->rx_prod = 0;
bp->rx_cons = 0;
- bp->hw_rx_cons = 0;
bp->rx_prod_bseq = 0;
for (i = 0; i < bp->rx_max_ring; i++) {
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= PHY_CRC_FIX_FLAG;
- else if (CHIP_ID(bp) == CHIP_ID_5709_A0 ||
- CHIP_ID(bp) == CHIP_ID_5709_A1)
+ else if (CHIP_NUM(bp) == CHIP_NUM_5709 &&
+ (CHIP_REV(bp) == CHIP_REV_Ax ||
+ CHIP_REV(bp) == CHIP_REV_Bx))
bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG;
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
u32 rx_prod_bseq;
u16 rx_prod;
u16 rx_cons;
- u16 hw_rx_cons;
u32 rx_csum;
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/if_bonding.h>
+#include <linux/jiffies.h>
#include <net/route.h>
#include <net/net_namespace.h>
#include "bonding.h"
struct bond_parm_tbl xmit_hashtype_tbl[] = {
{ "layer2", BOND_XMIT_POLICY_LAYER2},
{ "layer3+4", BOND_XMIT_POLICY_LAYER34},
+{ "layer2+3", BOND_XMIT_POLICY_LAYER23},
{ NULL, -1},
};
*/
bond_for_each_slave(bond, slave, i) {
if (slave->link != BOND_LINK_UP) {
- if (((jiffies - slave->dev->trans_start) <= delta_in_ticks) &&
- ((jiffies - slave->dev->last_rx) <= delta_in_ticks)) {
+ if (time_before_eq(jiffies, slave->dev->trans_start + delta_in_ticks) &&
+ time_before_eq(jiffies, slave->dev->last_rx + delta_in_ticks)) {
slave->link = BOND_LINK_UP;
slave->state = BOND_STATE_ACTIVE;
* when the source ip is 0, so don't take the link down
* if we don't know our ip yet
*/
- if (((jiffies - slave->dev->trans_start) >= (2*delta_in_ticks)) ||
- (((jiffies - slave->dev->last_rx) >= (2*delta_in_ticks)) &&
+ if (time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
+ (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks) &&
bond_has_ip(bond))) {
slave->link = BOND_LINK_DOWN;
*/
bond_for_each_slave(bond, slave, i) {
if (slave->link != BOND_LINK_UP) {
- if ((jiffies - slave_last_rx(bond, slave)) <=
- delta_in_ticks) {
+ if (time_before_eq(jiffies,
+ slave_last_rx(bond, slave) + delta_in_ticks)) {
slave->link = BOND_LINK_UP;
write_lock_bh(&bond->curr_slave_lock);
if ((!bond->curr_active_slave) &&
- ((jiffies - slave->dev->trans_start) <= delta_in_ticks)) {
+ time_before_eq(jiffies, slave->dev->trans_start + delta_in_ticks)) {
bond_change_active_slave(bond, slave);
bond->current_arp_slave = NULL;
} else if (bond->curr_active_slave != slave) {
if ((slave != bond->curr_active_slave) &&
(!bond->current_arp_slave) &&
- (((jiffies - slave_last_rx(bond, slave)) >= 3*delta_in_ticks) &&
+ (time_after_eq(jiffies, slave_last_rx(bond, slave) + 3*delta_in_ticks) &&
bond_has_ip(bond))) {
/* a backup slave has gone down; three times
* the delta allows the current slave to be
* before being taken out. if a primary is being used, check
* if it is up and needs to take over as the curr_active_slave
*/
- if ((((jiffies - slave->dev->trans_start) >= (2*delta_in_ticks)) ||
- (((jiffies - slave_last_rx(bond, slave)) >= (2*delta_in_ticks)) &&
- bond_has_ip(bond))) &&
- ((jiffies - slave->jiffies) >= 2*delta_in_ticks)) {
+ if ((time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
+ (time_after_eq(jiffies, slave_last_rx(bond, slave) + 2*delta_in_ticks) &&
+ bond_has_ip(bond))) &&
+ time_after_eq(jiffies, slave->jiffies + 2*delta_in_ticks)) {
slave->link = BOND_LINK_DOWN;
/*---------------------------- Hashing Policies -----------------------------*/
+/*
+ * Hash for the output device based upon layer 2 and layer 3 data. If
+ * the packet is not IP mimic bond_xmit_hash_policy_l2()
+ */
+static int bond_xmit_hash_policy_l23(struct sk_buff *skb,
+ struct net_device *bond_dev, int count)
+{
+ struct ethhdr *data = (struct ethhdr *)skb->data;
+ struct iphdr *iph = ip_hdr(skb);
+
+ if (skb->protocol == __constant_htons(ETH_P_IP)) {
+ return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
+ (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count;
+ }
+
+ return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+}
+
/*
* Hash for the output device based upon layer 3 and layer 4 data. If
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
/*------------------------- Device initialization ---------------------------*/
+static void bond_set_xmit_hash_policy(struct bonding *bond)
+{
+ switch (bond->params.xmit_policy) {
+ case BOND_XMIT_POLICY_LAYER23:
+ bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
+ break;
+ case BOND_XMIT_POLICY_LAYER34:
+ bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
+ break;
+ case BOND_XMIT_POLICY_LAYER2:
+ default:
+ bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
+ break;
+ }
+}
+
/*
* set bond mode specific net device operations
*/
break;
case BOND_MODE_XOR:
bond_dev->hard_start_xmit = bond_xmit_xor;
- if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34)
- bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
- else
- bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
+ bond_set_xmit_hash_policy(bond);
break;
case BOND_MODE_BROADCAST:
bond_dev->hard_start_xmit = bond_xmit_broadcast;
case BOND_MODE_8023AD:
bond_set_master_3ad_flags(bond);
bond_dev->hard_start_xmit = bond_3ad_xmit_xor;
- if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34)
- bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
- else
- bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
+ bond_set_xmit_hash_policy(bond);
break;
case BOND_MODE_ALB:
bond_set_master_alb_flags(bond);
#endif
}
+static void bond_work_cancel_all(struct bonding *bond)
+{
+ write_lock_bh(&bond->lock);
+ bond->kill_timers = 1;
+ write_unlock_bh(&bond->lock);
+
+ if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
+ cancel_delayed_work(&bond->mii_work);
+
+ if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
+ cancel_delayed_work(&bond->arp_work);
+
+ if (bond->params.mode == BOND_MODE_ALB &&
+ delayed_work_pending(&bond->alb_work))
+ cancel_delayed_work(&bond->alb_work);
+
+ if (bond->params.mode == BOND_MODE_8023AD &&
+ delayed_work_pending(&bond->ad_work))
+ cancel_delayed_work(&bond->ad_work);
+}
+
/* Unregister and free all bond devices.
* Caller must hold rtnl_lock.
*/
list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) {
struct net_device *bond_dev = bond->dev;
+ bond_work_cancel_all(bond);
bond_mc_list_destroy(bond);
/* Release the bonded slaves */
bond_release_all(bond_dev);
for (i = 0; tbl[i].modename; i++) {
if ((isdigit(*mode_arg) &&
tbl[i].mode == simple_strtol(mode_arg, NULL, 0)) ||
- (strncmp(mode_arg, tbl[i].modename,
- strlen(tbl[i].modename)) == 0)) {
+ (strcmp(mode_arg, tbl[i].modename) == 0)) {
return tbl[i].mode;
}
}
return res;
}
-static void bond_work_cancel_all(struct bonding *bond)
-{
- write_lock_bh(&bond->lock);
- bond->kill_timers = 1;
- write_unlock_bh(&bond->lock);
-
- if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
- cancel_delayed_work(&bond->mii_work);
-
- if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
- cancel_delayed_work(&bond->arp_work);
-
- if (bond->params.mode == BOND_MODE_ALB &&
- delayed_work_pending(&bond->alb_work))
- cancel_delayed_work(&bond->alb_work);
-
- if (bond->params.mode == BOND_MODE_8023AD &&
- delayed_work_pending(&bond->ad_work))
- cancel_delayed_work(&bond->ad_work);
-}
-
static int __init bonding_init(void)
{
int i;
* "show" function for the bond_masters attribute.
* The class parameter is ignored.
*/
-static ssize_t bonding_show_bonds(struct class *cls, char *buffer)
+static ssize_t bonding_show_bonds(struct class *cls, char *buf)
{
int res = 0;
struct bonding *bond;
/* not enough space for another interface name */
if ((PAGE_SIZE - res) > 10)
res = PAGE_SIZE - 10;
- res += sprintf(buffer + res, "++more++");
+ res += sprintf(buf + res, "++more++ ");
break;
}
- res += sprintf(buffer + res, "%s ",
- bond->dev->name);
+ res += sprintf(buf + res, "%s ", bond->dev->name);
}
- res += sprintf(buffer + res, "\n");
- res++;
+ if (res)
+ buf[res-1] = '\n'; /* eat the leftover space */
up_read(&(bonding_rwsem));
return res;
}
/* not enough space for another interface name */
if ((PAGE_SIZE - res) > 10)
res = PAGE_SIZE - 10;
- res += sprintf(buf + res, "++more++");
+ res += sprintf(buf + res, "++more++ ");
break;
}
res += sprintf(buf + res, "%s ", slave->dev->name);
}
read_unlock(&bond->lock);
- res += sprintf(buf + res, "\n");
- res++;
+ if (res)
+ buf[res-1] = '\n'; /* eat the leftover space */
return res;
}
return sprintf(buf, "%s %d\n",
bond_mode_tbl[bond->params.mode].modename,
- bond->params.mode) + 1;
+ bond->params.mode);
}
static ssize_t bonding_store_mode(struct device *d,
struct device_attribute *attr,
char *buf)
{
- int count;
struct bonding *bond = to_bond(d);
- if ((bond->params.mode != BOND_MODE_XOR) &&
- (bond->params.mode != BOND_MODE_8023AD)) {
- // Not Applicable
- count = sprintf(buf, "NA\n") + 1;
- } else {
- count = sprintf(buf, "%s %d\n",
- xmit_hashtype_tbl[bond->params.xmit_policy].modename,
- bond->params.xmit_policy) + 1;
- }
-
- return count;
+ return sprintf(buf, "%s %d\n",
+ xmit_hashtype_tbl[bond->params.xmit_policy].modename,
+ bond->params.xmit_policy);
}
static ssize_t bonding_store_xmit_hash(struct device *d,
goto out;
}
- if ((bond->params.mode != BOND_MODE_XOR) &&
- (bond->params.mode != BOND_MODE_8023AD)) {
- printk(KERN_ERR DRV_NAME
- "%s: Transmit hash policy is irrelevant in this mode.\n",
- bond->dev->name);
- ret = -EPERM;
- goto out;
- }
-
new_value = bond_parse_parm((char *)buf, xmit_hashtype_tbl);
if (new_value < 0) {
printk(KERN_ERR DRV_NAME
return sprintf(buf, "%s %d\n",
arp_validate_tbl[bond->params.arp_validate].modename,
- bond->params.arp_validate) + 1;
+ bond->params.arp_validate);
}
static ssize_t bonding_store_arp_validate(struct device *d,
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.arp_interval) + 1;
+ return sprintf(buf, "%d\n", bond->params.arp_interval);
}
static ssize_t bonding_store_arp_interval(struct device *d,
NIPQUAD(bond->params.arp_targets[i]));
}
if (res)
- res--; /* eat the leftover space */
- res += sprintf(buf + res, "\n");
- res++;
+ buf[res-1] = '\n'; /* eat the leftover space */
return res;
}
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon) + 1;
+ return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon);
}
static ssize_t bonding_store_downdelay(struct device *d,
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon) + 1;
+ return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon);
}
return sprintf(buf, "%s %d\n",
bond_lacp_tbl[bond->params.lacp_fast].modename,
- bond->params.lacp_fast) + 1;
+ bond->params.lacp_fast);
}
static ssize_t bonding_store_lacp(struct device *d,
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.miimon) + 1;
+ return sprintf(buf, "%d\n", bond->params.miimon);
}
static ssize_t bonding_store_miimon(struct device *d,
struct bonding *bond = to_bond(d);
if (bond->primary_slave)
- count = sprintf(buf, "%s\n", bond->primary_slave->dev->name) + 1;
- else
- count = sprintf(buf, "\n") + 1;
+ count = sprintf(buf, "%s\n", bond->primary_slave->dev->name);
return count;
}
{
struct bonding *bond = to_bond(d);
- return sprintf(buf, "%d\n", bond->params.use_carrier) + 1;
+ return sprintf(buf, "%d\n", bond->params.use_carrier);
}
static ssize_t bonding_store_carrier(struct device *d,
{
struct slave *curr;
struct bonding *bond = to_bond(d);
- int count;
+ int count = 0;
read_lock(&bond->curr_slave_lock);
curr = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
if (USES_PRIMARY(bond->params.mode) && curr)
- count = sprintf(buf, "%s\n", curr->dev->name) + 1;
- else
- count = sprintf(buf, "\n") + 1;
+ count = sprintf(buf, "%s\n", curr->dev->name);
return count;
}
curr = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
- return sprintf(buf, "%s\n", (curr) ? "up" : "down") + 1;
+ return sprintf(buf, "%s\n", (curr) ? "up" : "down");
}
static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
- count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.aggregator_id) + 1;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.aggregator_id);
}
- else
- count = sprintf(buf, "\n") + 1;
return count;
}
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
- count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0: ad_info.ports) + 1;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0: ad_info.ports);
}
- else
- count = sprintf(buf, "\n") + 1;
return count;
}
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
- count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.actor_key) + 1;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.actor_key);
}
- else
- count = sprintf(buf, "\n") + 1;
return count;
}
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
- count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.partner_key) + 1;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.partner_key);
}
- else
- count = sprintf(buf, "\n") + 1;
return count;
}
struct ad_info ad_info;
if (!bond_3ad_get_active_agg_info(bond, &ad_info)) {
count = sprintf(buf,"%s\n",
- print_mac(mac, ad_info.partner_system))
- + 1;
+ print_mac(mac, ad_info.partner_system));
}
}
- else
- count = sprintf(buf, "\n") + 1;
return count;
}
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.2.1"
-#define DRV_RELDATE "October 15, 2007"
+#define DRV_VERSION "3.2.3"
+#define DRV_RELDATE "December 6, 2007"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
"TxInternalMACXmitError",
"TxFramesWithExcessiveDeferral",
"TxFCSErrors",
-
+ "TxJumboFramesOk",
+ "TxJumboOctetsOk",
+
"RxOctetsOK",
"RxOctetsBad",
"RxUnicastFramesOK",
"RxInRangeLengthErrors",
"RxOutOfRangeLengthField",
"RxFrameTooLongErrors",
+ "RxJumboFramesOk",
+ "RxJumboOctetsOk",
/* Port stats */
- "RxPackets",
"RxCsumGood",
- "TxPackets",
"TxCsumOffload",
"TxTso",
"RxVlan",
"TxVlan",
-
+ "TxNeedHeadroom",
+
/* Interrupt stats */
"rx drops",
"pure_rsps",
const struct cmac_statistics *s;
const struct sge_intr_counts *t;
struct sge_port_stats ss;
- unsigned int len;
s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL);
-
- len = sizeof(u64)*(&s->TxFCSErrors + 1 - &s->TxOctetsOK);
- memcpy(data, &s->TxOctetsOK, len);
- data += len;
-
- len = sizeof(u64)*(&s->RxFrameTooLongErrors + 1 - &s->RxOctetsOK);
- memcpy(data, &s->RxOctetsOK, len);
- data += len;
-
+ t = t1_sge_get_intr_counts(adapter->sge);
t1_sge_get_port_stats(adapter->sge, dev->if_port, &ss);
- memcpy(data, &ss, sizeof(ss));
- data += sizeof(ss);
- t = t1_sge_get_intr_counts(adapter->sge);
+ *data++ = s->TxOctetsOK;
+ *data++ = s->TxOctetsBad;
+ *data++ = s->TxUnicastFramesOK;
+ *data++ = s->TxMulticastFramesOK;
+ *data++ = s->TxBroadcastFramesOK;
+ *data++ = s->TxPauseFrames;
+ *data++ = s->TxFramesWithDeferredXmissions;
+ *data++ = s->TxLateCollisions;
+ *data++ = s->TxTotalCollisions;
+ *data++ = s->TxFramesAbortedDueToXSCollisions;
+ *data++ = s->TxUnderrun;
+ *data++ = s->TxLengthErrors;
+ *data++ = s->TxInternalMACXmitError;
+ *data++ = s->TxFramesWithExcessiveDeferral;
+ *data++ = s->TxFCSErrors;
+ *data++ = s->TxJumboFramesOK;
+ *data++ = s->TxJumboOctetsOK;
+
+ *data++ = s->RxOctetsOK;
+ *data++ = s->RxOctetsBad;
+ *data++ = s->RxUnicastFramesOK;
+ *data++ = s->RxMulticastFramesOK;
+ *data++ = s->RxBroadcastFramesOK;
+ *data++ = s->RxPauseFrames;
+ *data++ = s->RxFCSErrors;
+ *data++ = s->RxAlignErrors;
+ *data++ = s->RxSymbolErrors;
+ *data++ = s->RxDataErrors;
+ *data++ = s->RxSequenceErrors;
+ *data++ = s->RxRuntErrors;
+ *data++ = s->RxJabberErrors;
+ *data++ = s->RxInternalMACRcvError;
+ *data++ = s->RxInRangeLengthErrors;
+ *data++ = s->RxOutOfRangeLengthField;
+ *data++ = s->RxFrameTooLongErrors;
+ *data++ = s->RxJumboFramesOK;
+ *data++ = s->RxJumboOctetsOK;
+
+ *data++ = ss.rx_cso_good;
+ *data++ = ss.tx_cso;
+ *data++ = ss.tx_tso;
+ *data++ = ss.vlan_xtract;
+ *data++ = ss.vlan_insert;
+ *data++ = ss.tx_need_hdrroom;
+
*data++ = t->rx_drops;
*data++ = t->pure_rsps;
*data++ = t->unhandled_irqs;
#include <linux/crc32.h>
-#define OFFSET(REG_ADDR) (REG_ADDR << 2)
+#define OFFSET(REG_ADDR) ((REG_ADDR) << 2)
/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */
#define MAX_FRAME_SIZE 9600
return 0;
}
-static void pm3393_rmon_update(struct adapter *adapter, u32 offs, u64 *val,
- int over)
-{
- u32 val0, val1, val2;
-
- t1_tpi_read(adapter, offs, &val0);
- t1_tpi_read(adapter, offs + 4, &val1);
- t1_tpi_read(adapter, offs + 8, &val2);
-
- *val &= ~0ull << 40;
- *val |= val0 & 0xffff;
- *val |= (val1 & 0xffff) << 16;
- *val |= (u64)(val2 & 0xff) << 32;
-
- if (over)
- *val += 1ull << 40;
+#define RMON_UPDATE(mac, name, stat_name) \
+{ \
+ t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \
+ t1_tpi_read((mac)->adapter, OFFSET((name)+1), &val1); \
+ t1_tpi_read((mac)->adapter, OFFSET((name)+2), &val2); \
+ (mac)->stats.stat_name = (u64)(val0 & 0xffff) | \
+ ((u64)(val1 & 0xffff) << 16) | \
+ ((u64)(val2 & 0xff) << 32) | \
+ ((mac)->stats.stat_name & \
+ 0xffffff0000000000ULL); \
+ if (ro & \
+ (1ULL << ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2))) \
+ (mac)->stats.stat_name += 1ULL << 40; \
}
static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
int flag)
{
- static struct {
- unsigned int reg;
- unsigned int offset;
- } hw_stats [] = {
-
-#define HW_STAT(name, stat_name) \
- { name, (&((struct cmac_statistics *)NULL)->stat_name) - (u64 *)NULL }
-
- /* Rx stats */
- HW_STAT(RxOctetsReceivedOK, RxOctetsOK),
- HW_STAT(RxUnicastFramesReceivedOK, RxUnicastFramesOK),
- HW_STAT(RxMulticastFramesReceivedOK, RxMulticastFramesOK),
- HW_STAT(RxBroadcastFramesReceivedOK, RxBroadcastFramesOK),
- HW_STAT(RxPAUSEMACCtrlFramesReceived, RxPauseFrames),
- HW_STAT(RxFrameCheckSequenceErrors, RxFCSErrors),
- HW_STAT(RxFramesLostDueToInternalMACErrors,
- RxInternalMACRcvError),
- HW_STAT(RxSymbolErrors, RxSymbolErrors),
- HW_STAT(RxInRangeLengthErrors, RxInRangeLengthErrors),
- HW_STAT(RxFramesTooLongErrors , RxFrameTooLongErrors),
- HW_STAT(RxJabbers, RxJabberErrors),
- HW_STAT(RxFragments, RxRuntErrors),
- HW_STAT(RxUndersizedFrames, RxRuntErrors),
- HW_STAT(RxJumboFramesReceivedOK, RxJumboFramesOK),
- HW_STAT(RxJumboOctetsReceivedOK, RxJumboOctetsOK),
-
- /* Tx stats */
- HW_STAT(TxOctetsTransmittedOK, TxOctetsOK),
- HW_STAT(TxFramesLostDueToInternalMACTransmissionError,
- TxInternalMACXmitError),
- HW_STAT(TxTransmitSystemError, TxFCSErrors),
- HW_STAT(TxUnicastFramesTransmittedOK, TxUnicastFramesOK),
- HW_STAT(TxMulticastFramesTransmittedOK, TxMulticastFramesOK),
- HW_STAT(TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK),
- HW_STAT(TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames),
- HW_STAT(TxJumboFramesReceivedOK, TxJumboFramesOK),
- HW_STAT(TxJumboOctetsReceivedOK, TxJumboOctetsOK)
- }, *p = hw_stats;
- u64 ro;
- u32 val0, val1, val2, val3;
- u64 *stats = (u64 *) &mac->stats;
- unsigned int i;
+ u64 ro;
+ u32 val0, val1, val2, val3;
/* Snap the counters */
pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) |
(((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48);
- for (i = 0; i < ARRAY_SIZE(hw_stats); i++) {
- unsigned reg = p->reg - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW;
-
- pm3393_rmon_update((mac)->adapter, OFFSET(p->reg),
- stats + p->offset, ro & (reg >> 2));
- }
-
-
+ /* Rx stats */
+ RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK);
+ RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK);
+ RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK);
+ RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK);
+ RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames);
+ RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors);
+ RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors,
+ RxInternalMACRcvError);
+ RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors);
+ RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors);
+ RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors);
+ RMON_UPDATE(mac, RxJabbers, RxJabberErrors);
+ RMON_UPDATE(mac, RxFragments, RxRuntErrors);
+ RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors);
+ RMON_UPDATE(mac, RxJumboFramesReceivedOK, RxJumboFramesOK);
+ RMON_UPDATE(mac, RxJumboOctetsReceivedOK, RxJumboOctetsOK);
+
+ /* Tx stats */
+ RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK);
+ RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError,
+ TxInternalMACXmitError);
+ RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors);
+ RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK);
+ RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK);
+ RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK);
+ RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames);
+ RMON_UPDATE(mac, TxJumboFramesReceivedOK, TxJumboFramesOK);
+ RMON_UPDATE(mac, TxJumboOctetsReceivedOK, TxJumboOctetsOK);
return &mac->stats;
}
for_each_possible_cpu(cpu) {
struct sge_port_stats *st = per_cpu_ptr(sge->port_stats[port], cpu);
- ss->rx_packets += st->rx_packets;
ss->rx_cso_good += st->rx_cso_good;
- ss->tx_packets += st->tx_packets;
ss->tx_cso += st->tx_cso;
ss->tx_tso += st->tx_tso;
+ ss->tx_need_hdrroom += st->tx_need_hdrroom;
ss->vlan_xtract += st->vlan_xtract;
ss->vlan_insert += st->vlan_insert;
}
__skb_pull(skb, sizeof(*p));
st = per_cpu_ptr(sge->port_stats[p->iff], smp_processor_id());
- st->rx_packets++;
skb->protocol = eth_type_trans(skb, adapter->port[p->iff].dev);
skb->dev->last_rx = jiffies;
{
struct adapter *adapter = container_of(napi, struct adapter, napi);
struct net_device *dev = adapter->port[0].dev;
- int work_done;
-
- work_done = process_responses(adapter, budget);
+ int work_done = process_responses(adapter, budget);
- if (likely(!responses_pending(adapter))) {
+ if (likely(work_done < budget)) {
netif_rx_complete(dev, napi);
writel(adapter->sge->respQ.cidx,
adapter->regs + A_SG_SLEEPING);
{
struct adapter *adapter = dev->priv;
struct sge *sge = adapter->sge;
- struct sge_port_stats *st = per_cpu_ptr(sge->port_stats[dev->if_port], smp_processor_id());
+ struct sge_port_stats *st = per_cpu_ptr(sge->port_stats[dev->if_port],
+ smp_processor_id());
struct cpl_tx_pkt *cpl;
struct sk_buff *orig_skb = skb;
int ret;
if (skb->protocol == htons(ETH_P_CPL5))
goto send;
+ /*
+ * We are using a non-standard hard_header_len.
+ * Allocate more header room in the rare cases it is not big enough.
+ */
+ if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) {
+ skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso));
+ ++st->tx_need_hdrroom;
+ dev_kfree_skb_any(orig_skb);
+ if (!skb)
+ return NETDEV_TX_OK;
+ }
+
if (skb_shinfo(skb)->gso_size) {
int eth_type;
struct cpl_tx_pkt_lso *hdr;
return NETDEV_TX_OK;
}
- /*
- * We are using a non-standard hard_header_len and some kernel
- * components, such as pktgen, do not handle it right.
- * Complain when this happens but try to fix things up.
- */
- if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) {
- pr_debug("%s: headroom %d header_len %d\n", dev->name,
- skb_headroom(skb), dev->hard_header_len);
-
- if (net_ratelimit())
- printk(KERN_ERR "%s: inadequate headroom in "
- "Tx packet\n", dev->name);
- skb = skb_realloc_headroom(skb, sizeof(*cpl));
- dev_kfree_skb_any(orig_skb);
- if (!skb)
- return NETDEV_TX_OK;
- }
-
if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
skb->ip_summed == CHECKSUM_PARTIAL &&
ip_hdr(skb)->protocol == IPPROTO_UDP) {
cpl->vlan_valid = 0;
send:
- st->tx_packets++;
dev->trans_start = jiffies;
ret = t1_sge_tx(skb, adapter, 0, dev);
};
struct sge_port_stats {
- u64 rx_packets; /* # of Ethernet packets received */
u64 rx_cso_good; /* # of successful RX csum offloads */
- u64 tx_packets; /* # of TX packets */
u64 tx_cso; /* # of TX checksum offloads */
u64 tx_tso; /* # of TSO requests */
u64 vlan_xtract; /* # of VLAN tag extractions */
u64 vlan_insert; /* # of VLAN tag insertions */
+ u64 tx_need_hdrroom; /* # of TX skbs in need of more header room */
};
struct sk_buff;
#define A_XGM_RXFIFO_CFG 0x884
+#define S_RXFIFO_EMPTY 31
+#define V_RXFIFO_EMPTY(x) ((x) << S_RXFIFO_EMPTY)
+#define F_RXFIFO_EMPTY V_RXFIFO_EMPTY(1U)
+
#define S_RXFIFOPAUSEHWM 17
#define M_RXFIFOPAUSEHWM 0xfff
#define A_XGM_TXFIFO_CFG 0x888
+#define S_UNDERUNFIX 22
+#define V_UNDERUNFIX(x) ((x) << S_UNDERUNFIX)
+#define F_UNDERUNFIX V_UNDERUNFIX(1U)
+
#define S_TXIPG 13
#define M_TXIPG 0xff
#define V_TXIPG(x) ((x) << S_TXIPG)
#define V_XAUIIMP(x) ((x) << S_XAUIIMP)
#define A_XGM_RX_MAX_PKT_SIZE 0x8a8
-#define A_XGM_RX_MAX_PKT_SIZE_ERR_CNT 0x9a4
+
+#define S_RXMAXFRAMERSIZE 17
+#define M_RXMAXFRAMERSIZE 0x3fff
+#define V_RXMAXFRAMERSIZE(x) ((x) << S_RXMAXFRAMERSIZE)
+#define G_RXMAXFRAMERSIZE(x) (((x) >> S_RXMAXFRAMERSIZE) & M_RXMAXFRAMERSIZE)
+
+#define S_RXENFRAMER 14
+#define V_RXENFRAMER(x) ((x) << S_RXENFRAMER)
+#define F_RXENFRAMER V_RXENFRAMER(1U)
+
+#define S_RXMAXPKTSIZE 0
+#define M_RXMAXPKTSIZE 0x3fff
+#define V_RXMAXPKTSIZE(x) ((x) << S_RXMAXPKTSIZE)
+#define G_RXMAXPKTSIZE(x) (((x) >> S_RXMAXPKTSIZE) & M_RXMAXPKTSIZE)
#define A_XGM_RESET_CTRL 0x8ac
+#define S_XGMAC_STOP_EN 4
+#define V_XGMAC_STOP_EN(x) ((x) << S_XGMAC_STOP_EN)
+#define F_XGMAC_STOP_EN V_XGMAC_STOP_EN(1U)
+
#define S_XG2G_RESET_ 3
#define V_XG2G_RESET_(x) ((x) << S_XG2G_RESET_)
#define F_XG2G_RESET_ V_XG2G_RESET_(1U)
&mi1_mdio_ops, "Chelsio T302"},
{1, 0, 0, 0,
F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
- F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
- SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+ F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
+ 0, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T310"},
{2, 0, 0, 0,
F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
* it can accomodate max size TCP/IP headers when SACK and timestamps
* are enabled and still have at least 8 bytes of payload.
*/
- mtus[1] = 88;
+ mtus[0] = 88;
mtus[1] = 88;
mtus[2] = 256;
mtus[3] = 512;
t3_set_reg_field(adap, A_XGM_RXFIFO_CFG + oft,
F_RXSTRFRWRD | F_DISERRFRAMES,
uses_xaui(adap) ? 0 : F_RXSTRFRWRD);
+ t3_set_reg_field(adap, A_XGM_TXFIFO_CFG + oft, 0, F_UNDERUNFIX);
if (uses_xaui(adap)) {
if (adap->params.rev == 0) {
xaui_serdes_reset(mac);
}
- val = F_MAC_RESET_;
+ t3_set_reg_field(adap, A_XGM_RX_MAX_PKT_SIZE + oft,
+ V_RXMAXFRAMERSIZE(M_RXMAXFRAMERSIZE),
+ V_RXMAXFRAMERSIZE(MAX_FRAME_SIZE) | F_RXENFRAMER);
+ val = F_MAC_RESET_ | F_XGMAC_STOP_EN;
+
if (is_10G(adap))
val |= F_PCS_RESET_;
else if (uses_xaui(adap))
int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu)
{
- int hwm, lwm;
- unsigned int thres, v;
+ int hwm, lwm, divisor;
+ int ipg;
+ unsigned int thres, v, reg;
struct adapter *adap = mac->adapter;
/*
hwm = min(hwm, MAC_RXFIFO_SIZE - 8192);
lwm = min(3 * (int)mtu, MAC_RXFIFO_SIZE / 4);
- if (adap->params.rev == T3_REV_B2 &&
+ if (adap->params.rev >= T3_REV_B2 &&
(t3_read_reg(adap, A_XGM_RX_CTRL + mac->offset) & F_RXEN)) {
disable_exact_filters(mac);
v = t3_read_reg(adap, A_XGM_RX_CFG + mac->offset);
t3_set_reg_field(adap, A_XGM_RX_CFG + mac->offset,
F_ENHASHMCAST | F_COPYALLFRAMES, F_DISBCAST);
- /* drain rx FIFO */
- if (t3_wait_op_done(adap,
- A_XGM_RX_MAX_PKT_SIZE_ERR_CNT +
- mac->offset,
- 1 << 31, 1, 20, 5)) {
+ reg = adap->params.rev == T3_REV_B2 ?
+ A_XGM_RX_MAX_PKT_SIZE_ERR_CNT : A_XGM_RXFIFO_CFG;
+
+ /* drain RX FIFO */
+ if (t3_wait_op_done(adap, reg + mac->offset,
+ F_RXFIFO_EMPTY, 1, 20, 5)) {
t3_write_reg(adap, A_XGM_RX_CFG + mac->offset, v);
enable_exact_filters(mac);
return -EIO;
}
- t3_write_reg(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset, mtu);
+ t3_set_reg_field(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset,
+ V_RXMAXPKTSIZE(M_RXMAXPKTSIZE),
+ V_RXMAXPKTSIZE(mtu));
t3_write_reg(adap, A_XGM_RX_CFG + mac->offset, v);
enable_exact_filters(mac);
} else
- t3_write_reg(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset, mtu);
+ t3_set_reg_field(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset,
+ V_RXMAXPKTSIZE(M_RXMAXPKTSIZE),
+ V_RXMAXPKTSIZE(mtu));
/*
* Adjust the PAUSE frame watermarks. We always set the LWM, and the
thres /= 10;
thres = mtu > thres ? (mtu - thres + 7) / 8 : 0;
thres = max(thres, 8U); /* need at least 8 */
+ ipg = (adap->params.rev == T3_REV_C) ? 0 : 1;
t3_set_reg_field(adap, A_XGM_TXFIFO_CFG + mac->offset,
V_TXFIFOTHRESH(M_TXFIFOTHRESH) | V_TXIPG(M_TXIPG),
- V_TXFIFOTHRESH(thres) | V_TXIPG(1));
+ V_TXFIFOTHRESH(thres) | V_TXIPG(ipg));
- if (adap->params.rev > 0)
+ if (adap->params.rev > 0) {
+ divisor = (adap->params.rev == T3_REV_C) ? 64 : 8;
t3_write_reg(adap, A_XGM_PAUSE_TIMER + mac->offset,
- (hwm - lwm) * 4 / 8);
+ (hwm - lwm) * 4 / divisor);
+ }
t3_write_reg(adap, A_XGM_TX_PAUSE_QUANTA + mac->offset,
MAC_RXFIFO_SIZE * 4 * 8 / 512);
return 0;
goto rxcheck;
}
- if ((tx_tcnt != mac->tx_tcnt) && (mac->tx_xcnt == 0)) {
+ if ((tx_tcnt != mac->tx_tcnt) && (mac->tx_xcnt == 0)) {
if (mac->toggle_cnt > 4) {
status = 2;
goto out;
strcpy(info->bus_info, pci_name(nic->pdev));
}
+#define E100_PHY_REGS 0x1C
static int e100_get_regs_len(struct net_device *netdev)
{
struct nic *nic = netdev_priv(netdev);
-#define E100_PHY_REGS 0x1C
-#define E100_REGS_LEN 1 + E100_PHY_REGS + \
- sizeof(nic->mem->dump_buf) / sizeof(u32)
- return E100_REGS_LEN * sizeof(u32);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
}
static void e100_get_regs(struct net_device *netdev,
switch (stringset) {
case ETH_SS_TEST:
memcpy(data, *e1000_gstrings_test,
- E1000_TEST_LEN*ETH_GSTRING_LEN);
+ sizeof(e1000_gstrings_test));
break;
case ETH_SS_STATS:
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
&work_done, budget);
/* If no Tx and not enough Rx work done, exit the polling mode */
- if ((!tx_cleaned && (work_done < budget)) ||
+ if ((!tx_cleaned && (work_done == 0)) ||
!netif_running(poll_dev)) {
quit_polling:
if (likely(adapter->itr_setting & 3))
switch (stringset) {
case ETH_SS_TEST:
memcpy(data, *e1000_gstrings_test,
- E1000_TEST_LEN*ETH_GSTRING_LEN);
+ sizeof(e1000_gstrings_test));
break;
case ETH_SS_STATS:
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0080"
+#define DRV_VERSION "EHEA_0083"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
struct ehea_port *port = netdev_priv(dev);
struct net_device_stats *stats = &port->stats;
struct hcp_ehea_port_cb2 *cb2;
- u64 hret, rx_packets;
+ u64 hret, rx_packets, tx_packets;
int i;
memset(stats, 0, sizeof(*stats));
for (i = 0; i < port->num_def_qps; i++)
rx_packets += port->port_res[i].rx_packets;
- stats->tx_packets = cb2->txucp + cb2->txmcp + cb2->txbcp;
+ tx_packets = 0;
+ for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
+ tx_packets += port->port_res[i].tx_packets;
+
+ stats->tx_packets = tx_packets;
stats->multicast = cb2->rxmcp;
stats->rx_errors = cb2->rxuerr;
stats->rx_bytes = cb2->rxo;
if (cqe->status & EHEA_CQE_STAT_ERR_CRC)
pr->p_stats.err_frame_crc++;
- if (netif_msg_rx_err(pr->port)) {
- ehea_error("CQE Error for QP %d", pr->qp->init_attr.qp_nr);
- ehea_dump(cqe, sizeof(*cqe), "CQE");
- }
-
if (rq == 2) {
*processed_rq2 += 1;
skb = get_skb_by_index(pr->rq2_skba.arr, pr->rq2_skba.len, cqe);
}
if (cqe->status & EHEA_CQE_STAT_FAT_ERR_MASK) {
- ehea_error("Critical receive error. Resetting port.");
+ if (netif_msg_rx_err(pr->port)) {
+ ehea_error("Critical receive error for QP %d. "
+ "Resetting port.", pr->qp->init_attr.qp_nr);
+ ehea_dump(cqe, sizeof(*cqe), "CQE");
+ }
schedule_work(&pr->port->reset_task);
return 1;
}
}
ehea_post_swqe(pr->qp, swqe);
+ pr->tx_packets++;
if (unlikely(atomic_read(&pr->swqe_avail) <= 1)) {
spin_lock_irqsave(&pr->netif_queue, flags);
#define EHEA_CQE_VLAN_TAG_XTRACT 0x0400
#define EHEA_CQE_TYPE_RQ 0x60
-#define EHEA_CQE_STAT_ERR_MASK 0x720F
-#define EHEA_CQE_STAT_FAT_ERR_MASK 0x1F
+#define EHEA_CQE_STAT_ERR_MASK 0x700F
+#define EHEA_CQE_STAT_FAT_ERR_MASK 0xF
#define EHEA_CQE_STAT_ERR_TCP 0x4000
#define EHEA_CQE_STAT_ERR_IP 0x2000
#define EHEA_CQE_STAT_ERR_CRC 0x1000
rskb = bcom_retrieve_buffer(priv->rx_dmatsk, &status,
(struct bcom_bd **)&bd);
- dma_unmap_single(&dev->dev, bd->skb_pa, skb->len, DMA_FROM_DEVICE);
+ dma_unmap_single(&dev->dev, bd->skb_pa, rskb->len, DMA_FROM_DEVICE);
/* Test for errors in received frame */
if (status & BCOM_FEC_RX_BD_ERRORS) {
bcom_prepare_next_buffer(priv->rx_dmatsk);
bd->status = FEC_RX_BUFFER_SIZE;
- bd->skb_pa = dma_map_single(&dev->dev, rskb->data,
+ bd->skb_pa = dma_map_single(&dev->dev, skb->data,
FEC_RX_BUFFER_SIZE, DMA_FROM_DEVICE);
bcom_submit_next_buffer(priv->rx_dmatsk, skb);
mpc52xx_fec_reset_stats(ndev);
+ SET_NETDEV_DEV(ndev, &op->dev);
+
/* Register the new network device */
rv = register_netdev(ndev);
if (rv < 0)
if (readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_PHY_INIT) {
np->mac_in_use = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST;
dprintk(KERN_INFO "%s: mgmt unit is running. mac in use %x.\n", pci_name(pci_dev), np->mac_in_use);
- for (i = 0; i < 5000; i++) {
- msleep(1);
- if (nv_mgmt_acquire_sema(dev)) {
- /* management unit setup the phy already? */
- if ((readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK) ==
- NVREG_XMITCTL_SYNC_PHY_INIT) {
- /* phy is inited by mgmt unit */
- phyinitialized = 1;
- dprintk(KERN_INFO "%s: Phy already initialized by mgmt unit.\n", pci_name(pci_dev));
- } else {
- /* we need to init the phy */
- }
- break;
+ if (nv_mgmt_acquire_sema(dev)) {
+ /* management unit setup the phy already? */
+ if ((readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK) ==
+ NVREG_XMITCTL_SYNC_PHY_INIT) {
+ /* phy is inited by mgmt unit */
+ phyinitialized = 1;
+ dprintk(KERN_INFO "%s: Phy already initialized by mgmt unit.\n", pci_name(pci_dev));
+ } else {
+ /* we need to init the phy */
}
}
}
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
+ { /* MCP79 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
+ { /* MCP79 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
+ { /* MCP79 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
+ { /* MCP79 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
{0,},
};
{
struct txbd8 *txbdp;
struct rxbd8 *rxbdp;
- dma_addr_t addr;
+ dma_addr_t addr = 0;
unsigned long vaddr;
int i;
struct gfar_private *priv = netdev_priv(dev);
*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size)
{
u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC4_MR1_TR |
- EMAC4_MR1_OBCI(dev->opb_bus_freq);
+ EMAC4_MR1_OBCI(dev->opb_bus_freq / 1000000);
DBG2(dev, "__emac4_calc_base_mr1" NL);
{
struct emac_regs __iomem *p = dev->emacp;
struct net_device *ndev = dev->ndev;
- int tx_size, rx_size;
+ int tx_size, rx_size, link = netif_carrier_ok(dev->ndev);
u32 r, mr1 = 0;
DBG(dev, "configure" NL);
- if (emac_reset(dev) < 0)
+ if (!link) {
+ out_be32(&p->mr1, in_be32(&p->mr1)
+ | EMAC_MR1_FDE | EMAC_MR1_ILE);
+ udelay(100);
+ } else if (emac_reset(dev) < 0)
return -ETIMEDOUT;
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
tah_reset(dev->tah_dev);
- DBG(dev, " duplex = %d, pause = %d, asym_pause = %d\n",
- dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause);
+ DBG(dev, " link = %d duplex = %d, pause = %d, asym_pause = %d\n",
+ link, dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause);
/* Default fifo sizes */
tx_size = dev->tx_fifo_size;
rx_size = dev->rx_fifo_size;
+ /* No link, force loopback */
+ if (!link)
+ mr1 = EMAC_MR1_FDE | EMAC_MR1_ILE;
+
/* Check for full duplex */
- if (dev->phy.duplex == DUPLEX_FULL)
+ else if (dev->phy.duplex == DUPLEX_FULL)
mr1 |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001;
/* Adjust fifo sizes, mr1 and timeouts based on link speed */
DBG(dev, "reset_work" NL);
mutex_lock(&dev->link_lock);
- emac_netif_stop(dev);
- emac_full_tx_reset(dev);
- emac_netif_start(dev);
+ if (dev->opened) {
+ emac_netif_stop(dev);
+ emac_full_tx_reset(dev);
+ emac_netif_start(dev);
+ }
mutex_unlock(&dev->link_lock);
}
r = EMAC_STACR_BASE(dev->opb_bus_freq);
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
r |= EMAC_STACR_OC;
- if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR))
+ if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR))
r |= EMACX_STACR_STAC_READ;
else
r |= EMAC_STACR_STAC_READ;
r = EMAC_STACR_BASE(dev->opb_bus_freq);
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
r |= EMAC_STACR_OC;
- if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR))
+ if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR))
r |= EMACX_STACR_STAC_WRITE;
else
r |= EMAC_STACR_STAC_WRITE;
dev->rx_sg_skb = NULL;
mutex_lock(&dev->link_lock);
+ dev->opened = 1;
- /* XXX Start PHY polling now. Shouldn't wr do like sungem instead and
- * always poll the PHY even when the iface is down ? That would allow
- * things like laptop-net to work. --BenH
+ /* Start PHY polling now.
*/
if (dev->phy.address >= 0) {
int link_poll_interval;
int link_poll_interval;
mutex_lock(&dev->link_lock);
-
DBG2(dev, "link timer" NL);
+ if (!dev->opened)
+ goto bail;
+
if (dev->phy.def->ops->poll_link(&dev->phy)) {
if (!netif_carrier_ok(dev->ndev)) {
/* Get new link parameters */
link_poll_interval = PHY_POLL_LINK_ON;
} else {
if (netif_carrier_ok(dev->ndev)) {
- emac_reinitialize(dev);
netif_carrier_off(dev->ndev);
netif_tx_disable(dev->ndev);
+ emac_reinitialize(dev);
emac_print_link_status(dev);
}
link_poll_interval = PHY_POLL_LINK_OFF;
}
schedule_delayed_work(&dev->link_work, link_poll_interval);
-
+ bail:
mutex_unlock(&dev->link_lock);
}
static void emac_force_link_update(struct emac_instance *dev)
{
netif_carrier_off(dev->ndev);
+ smp_rmb();
if (dev->link_polling) {
cancel_rearming_delayed_work(&dev->link_work);
if (dev->link_polling)
DBG(dev, "close" NL);
- if (dev->phy.address >= 0)
+ if (dev->phy.address >= 0) {
+ dev->link_polling = 0;
cancel_rearming_delayed_work(&dev->link_work);
-
+ }
+ mutex_lock(&dev->link_lock);
emac_netif_stop(dev);
- flush_scheduled_work();
+ dev->opened = 0;
+ mutex_unlock(&dev->link_lock);
emac_rx_disable(dev);
emac_tx_disable(dev);
if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0))
dev->tah_ph = 0;
if (emac_read_uint_prop(np, "tah-channel", &dev->tah_port, 0))
- dev->tah_ph = 0;
+ dev->tah_port = 0;
if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0))
dev->mdio_ph = 0;
if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0))
/* Check EMAC version */
if (of_device_is_compatible(np, "ibm,emac4"))
dev->features |= EMAC_FTR_EMAC4;
- if (of_device_is_compatible(np, "ibm,emac-axon")
- || of_device_is_compatible(np, "ibm,emac-440epx"))
- dev->features |= EMAC_FTR_HAS_AXON_STACR
- | EMAC_FTR_STACR_OC_INVERT;
- if (of_device_is_compatible(np, "ibm,emac-440spe"))
+
+ /* Fixup some feature bits based on the device tree */
+ if (of_get_property(np, "has-inverted-stacr-oc", NULL))
dev->features |= EMAC_FTR_STACR_OC_INVERT;
+ if (of_get_property(np, "has-new-stacr-staopc", NULL))
+ dev->features |= EMAC_FTR_HAS_NEW_STACR;
- /* Fixup some feature bits based on the device tree and verify
- * we have support for them compiled in
- */
+ /* CAB lacks the appropriate properties */
+ if (of_device_is_compatible(np, "ibm,emac-axon"))
+ dev->features |= EMAC_FTR_HAS_NEW_STACR |
+ EMAC_FTR_STACR_OC_INVERT;
+
+ /* Enable TAH/ZMII/RGMII features as found */
if (dev->tah_ph != 0) {
#ifdef CONFIG_IBM_NEW_EMAC_TAH
dev->features |= EMAC_FTR_HAS_TAH;
struct device_node **blist = NULL;
int err, i;
+ /* Skip unused/unwired EMACS */
+ if (of_get_property(np, "unused", NULL))
+ return -ENODEV;
+
/* Find ourselves in the bootlist if we are there */
for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
if (emac_boot_list[i] == np)
unregister_netdev(dev->ndev);
+ flush_scheduled_work();
+
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
tah_detach(dev->tah_dev, dev->tah_port);
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
int stop_timeout; /* in us */
int no_mcast;
int mcast_pending;
+ int opened;
struct work_struct reset_work;
spinlock_t lock;
};
*/
#define EMAC_FTR_HAS_RGMII 0x00000020
/*
- * Set if we have axon-type STACR
+ * Set if we have new type STACR with STAOPC
*/
-#define EMAC_FTR_HAS_AXON_STACR 0x00000040
+#define EMAC_FTR_HAS_NEW_STACR 0x00000040
/* Right now, we don't quite handle the always/possible masks on the
EMAC_FTRS_POSSIBLE =
#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
- EMAC_FTR_EMAC4 | EMAC_FTR_HAS_AXON_STACR |
+ EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
EMAC_FTR_STACR_OC_INVERT |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_TAH
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
*
* Register definitions for PowerPC 4xx on-chip ethernet contoller
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
*
* Memory Access Layer (MAL) support
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
*
* Memory Access Layer (MAL) support
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This file should be shared with other drivers or eventually
* merged as the "low level" part of miilib
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
* (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
*
.ops = &cis8201_phy_ops
};
+static struct mii_phy_def bcm5248_phy_def = {
+
+ .phy_id = 0x0143bc00,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "BCM5248 10/100 SMII Ethernet",
+ .ops = &generic_phy_ops
+};
+
+static int m88e1111_init(struct mii_phy *phy)
+{
+ pr_debug("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
+ phy_write(phy, 0x14, 0x0ce3);
+ phy_write(phy, 0x18, 0x4101);
+ phy_write(phy, 0x09, 0x0e00);
+ phy_write(phy, 0x04, 0x01e1);
+ phy_write(phy, 0x00, 0x9140);
+ phy_write(phy, 0x00, 0x1140);
+
+ return 0;
+}
+
+static int et1011c_init(struct mii_phy *phy)
+{
+ u16 reg_short;
+
+ reg_short = (u16)(phy_read(phy, 0x16));
+ reg_short &= ~(0x7);
+ reg_short |= 0x6; /* RGMII Trace Delay*/
+ phy_write(phy, 0x16, reg_short);
+
+ reg_short = (u16)(phy_read(phy, 0x17));
+ reg_short &= ~(0x40);
+ phy_write(phy, 0x17, reg_short);
+
+ phy_write(phy, 0x1c, 0x74f0);
+ return 0;
+}
+
+static struct mii_phy_ops et1011c_phy_ops = {
+ .init = et1011c_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def et1011c_phy_def = {
+ .phy_id = 0x0282f000,
+ .phy_id_mask = 0x0fffff00,
+ .name = "ET1011C Gigabit Ethernet",
+ .ops = &et1011c_phy_ops
+};
+
+
+
+
+
+static struct mii_phy_ops m88e1111_phy_ops = {
+ .init = m88e1111_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def m88e1111_phy_def = {
+
+ .phy_id = 0x01410CC0,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Marvell 88E1111 Ethernet",
+ .ops = &m88e1111_phy_ops,
+};
+
static struct mii_phy_def *mii_phy_table[] = {
+ &et1011c_phy_def,
&cis8201_phy_def,
+ &bcm5248_phy_def,
+ &m88e1111_phy_def,
&genmii_phy_def,
NULL
};
*
* Driver for PowerPC 4xx on-chip ethernet controller, PHY support
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
* February 2003
*
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
RGMII_DBG2(dev, "get_mdio(%d)" NL, input);
- if (dev->type != RGMII_AXON)
+ if (!(dev->flags & EMAC_RGMII_FLAG_HAS_MDIO))
return;
mutex_lock(&dev->lock);
RGMII_DBG2(dev, "put_mdio(%d)" NL, input);
- if (dev->type != RGMII_AXON)
+ if (!(dev->flags & EMAC_RGMII_FLAG_HAS_MDIO))
return;
fer = in_be32(&p->fer);
goto err_free;
}
- /* Check for RGMII type */
+ /* Check for RGMII flags */
+ if (of_get_property(ofdev->node, "has-mdio", NULL))
+ dev->flags |= EMAC_RGMII_FLAG_HAS_MDIO;
+
+ /* CAB lacks the right properties, fix this up */
if (of_device_is_compatible(ofdev->node, "ibm,rgmii-axon"))
- dev->type = RGMII_AXON;
- else
- dev->type = RGMII_STANDARD;
+ dev->flags |= EMAC_RGMII_FLAG_HAS_MDIO;
DBG2(dev, " Boot FER = 0x%08x, SSR = 0x%08x\n",
in_be32(&dev->base->fer), in_be32(&dev->base->ssr));
out_be32(&dev->base->fer, 0);
printk(KERN_INFO
- "RGMII %s %s initialized\n",
- dev->type == RGMII_STANDARD ? "standard" : "axon",
- ofdev->node->full_name);
+ "RGMII %s initialized with%s MDIO support\n",
+ ofdev->node->full_name,
+ (dev->flags & EMAC_RGMII_FLAG_HAS_MDIO) ? "" : "out");
wmb();
dev_set_drvdata(&ofdev->dev, dev);
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Based on ocp_zmii.h/ibm_emac_zmii.h
* Armin Kuster akuster@mvista.com
*
struct rgmii_instance {
struct rgmii_regs __iomem *base;
- /* Type of RGMII bridge */
- int type;
+ /* RGMII bridge flags */
+ int flags;
+#define EMAC_RGMII_FLAG_HAS_MDIO 0x00000001
/* Only one EMAC whacks us at a time */
struct mutex lock;
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
goto err_free;
}
+ dev_set_drvdata(&ofdev->dev, dev);
+
/* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
tah_reset(ofdev);
printk(KERN_INFO
"TAH %s initialized\n", ofdev->node->full_name);
wmb();
- dev_set_drvdata(&ofdev->dev, dev);
return 0;
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
*
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
ZMII_DBG(dev, "init(%d, %d)" NL, input, *mode);
- if (!zmii_valid_mode(*mode))
+ if (!zmii_valid_mode(*mode)) {
/* Probably an EMAC connected to RGMII,
* but it still may need ZMII for MDIO so
* we don't fail here.
*/
+ dev->users++;
return 0;
+ }
mutex_lock(&dev->lock);
*
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
struct i596_tbd {
unsigned short size;
unsigned short pad;
- dma_addr_t next;
- dma_addr_t data;
+ u32 next;
+ u32 data;
u32 cache_pad[5]; /* Total 32 bytes... */
};
struct i596_cmd *v_next; /* Address from CPUs viewpoint */
unsigned short status;
unsigned short command;
- dma_addr_t b_next; /* Address from i596 viewpoint */
+ u32 b_next; /* Address from i596 viewpoint */
};
struct tx_cmd {
struct i596_cmd cmd;
- dma_addr_t tbd;
+ u32 tbd;
unsigned short size;
unsigned short pad;
struct sk_buff *skb; /* So we can free it after tx */
struct i596_rfd {
unsigned short stat;
unsigned short cmd;
- dma_addr_t b_next; /* Address from i596 viewpoint */
- dma_addr_t rbd;
+ u32 b_next; /* Address from i596 viewpoint */
+ u32 rbd;
unsigned short count;
unsigned short size;
struct i596_rfd *v_next; /* Address from CPUs viewpoint */
};
struct i596_rbd {
- /* hardware data */
- unsigned short count;
- unsigned short zero1;
- dma_addr_t b_next;
- dma_addr_t b_data; /* Address from i596 viewpoint */
- unsigned short size;
- unsigned short zero2;
- /* driver data */
- struct sk_buff *skb;
- struct i596_rbd *v_next;
- dma_addr_t b_addr; /* This rbd addr from i596 view */
- unsigned char *v_data; /* Address from CPUs viewpoint */
+ /* hardware data */
+ unsigned short count;
+ unsigned short zero1;
+ u32 b_next;
+ u32 b_data; /* Address from i596 viewpoint */
+ unsigned short size;
+ unsigned short zero2;
+ /* driver data */
+ struct sk_buff *skb;
+ struct i596_rbd *v_next;
+ u32 b_addr; /* This rbd addr from i596 view */
+ unsigned char *v_data; /* Address from CPUs viewpoint */
/* Total 32 bytes... */
#ifdef __LP64__
u32 cache_pad[4];
struct i596_scb {
unsigned short status;
unsigned short command;
- dma_addr_t cmd;
- dma_addr_t rfd;
+ u32 cmd;
+ u32 rfd;
u32 crc_err;
u32 align_err;
u32 resource_err;
};
struct i596_iscp {
- u32 stat;
- dma_addr_t scb;
+ u32 stat;
+ u32 scb;
};
struct i596_scp {
- u32 sysbus;
- u32 pad;
- dma_addr_t iscp;
+ u32 sysbus;
+ u32 pad;
+ u32 iscp;
};
struct i596_dma {
struct mlx4_cmd_mailbox *mailbox;
int ret = 0;
- if (cur_state >= MLX4_QP_NUM_STATE || cur_state >= MLX4_QP_NUM_STATE ||
+ if (cur_state >= MLX4_QP_NUM_STATE || new_state >= MLX4_QP_NUM_STATE ||
!op[cur_state][new_state])
return -EINVAL;
lro_mgr->lro_arr = mgp->rx_done.lro_desc;
lro_mgr->get_frag_header = myri10ge_get_frag_header;
lro_mgr->max_aggr = myri10ge_lro_max_pkts;
+ lro_mgr->frag_align_pad = 2;
if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
lro_mgr->max_aggr = MAX_SKB_FRAGS;
}
static void niu_init_xif(struct niu *);
+static void niu_handle_led(struct niu *, int status);
static int niu_link_status_common(struct niu *np, int link_up)
{
spin_lock_irqsave(&np->lock, flags);
niu_init_xif(np);
+ niu_handle_led(np, 1);
spin_unlock_irqrestore(&np->lock, flags);
netif_carrier_on(dev);
} else if (netif_carrier_ok(dev) && !link_up) {
niuwarn(LINK, "%s: Link is down\n", dev->name);
+ spin_lock_irqsave(&np->lock, flags);
+ niu_handle_led(np, 0);
+ spin_unlock_irqrestore(&np->lock, flags);
netif_carrier_off(dev);
}
return 0;
}
-static void niu_init_xif_xmac(struct niu *np)
+static void niu_handle_led(struct niu *np, int status)
{
- struct niu_link_config *lp = &np->link_config;
u64 val;
-
val = nr64_mac(XMAC_CONFIG);
if ((np->flags & NIU_FLAGS_10G) != 0 &&
(np->flags & NIU_FLAGS_FIBER) != 0) {
- if (netif_carrier_ok(np->dev)) {
+ if (status) {
val |= XMAC_CONFIG_LED_POLARITY;
val &= ~XMAC_CONFIG_FORCE_LED_ON;
} else {
}
}
+ nw64_mac(XMAC_CONFIG, val);
+}
+
+static void niu_init_xif_xmac(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ u64 val;
+
+ val = nr64_mac(XMAC_CONFIG);
val &= ~XMAC_CONFIG_SEL_POR_CLK_SRC;
val |= XMAC_CONFIG_TX_OUTPUT_EN;
niu_free_channels(np);
+ niu_handle_led(np, 0);
+
return 0;
}
/* CRC error flagged */
mac->netdev->stats.rx_errors++;
mac->netdev->stats.rx_crc_errors++;
- dev_kfree_skb_irq(skb);
+ /* No need to free skb, it'll be reused */
goto next;
}
netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
- dev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX | NETIF_F_SG;
+ dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG;
/* These should come out of the device tree eventually */
mac->dma_txch = index;
int err;
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
- (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) {
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
int temp;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
- if (temp < 0)
- return temp;
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
-
- err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
- if (err < 0)
- return err;
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
}
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
err = device_register(&phydev->dev);
- if (err)
+ if (err) {
printk(KERN_ERR "phy %d failed to register\n",
i);
+ phy_device_free(phydev);
+ phydev = NULL;
+ }
}
bus->phy_map[i] = phydev;
int i;
for (i = 0; i < PHY_MAX_ADDR; i++) {
- if (bus->phy_map[i]) {
+ if (bus->phy_map[i])
device_unregister(&bus->phy_map[i]->dev);
- kfree(bus->phy_map[i]);
- }
}
}
EXPORT_SYMBOL(mdiobus_unregister);
&& phydev->drv->config_init)
phydev->drv->config_init(phydev);
break;
+
+ default:
+ return -ENOTTY;
}
return 0;
extern int mdio_bus_init(void);
extern void mdio_bus_exit(void);
+void phy_device_free(struct phy_device *phydev)
+{
+ kfree(phydev);
+}
+
+static void phy_device_release(struct device *dev)
+{
+ phy_device_free(to_phy_device(dev));
+}
+
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
{
struct phy_device *dev;
if (NULL == dev)
return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
+ dev->dev.release = phy_device_release;
+
dev->speed = 0;
dev->duplex = -1;
dev->pause = dev->asym_pause = 0;
case PLIP_PK_DONE:
/* Inform the upper layer for the arrival of a packet. */
rcv->skb->protocol=plip_type_trans(rcv->skb, dev);
- netif_rx(rcv->skb);
+ netif_rx_ni(rcv->skb);
dev->last_rx = jiffies;
dev->stats.rx_bytes += rcv->length.h;
dev->stats.rx_packets++;
nl = netdev_priv(dev);
nl->dev = dev;
- nl->pardev = parport_register_device(port, name, plip_preempt,
+ nl->pardev = parport_register_device(port, dev->name, plip_preempt,
plip_wakeup, plip_interrupt,
0, dev);
#define ADAPTER_STATUS_RC_PRC_QUIESCENT vBIT(0xFF,16,8)
#define ADAPTER_STATUS_MC_DRAM_READY s2BIT(24)
#define ADAPTER_STATUS_MC_QUEUES_READY s2BIT(25)
+#define ADAPTER_STATUS_RIC_RUNNING s2BIT(26)
#define ADAPTER_STATUS_M_PLL_LOCK s2BIT(30)
#define ADAPTER_STATUS_P_PLL_LOCK s2BIT(31)
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.6"
+#define DRV_VERSION "2.0.26.10"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
/* to set the swapper controle on the card */
if(s2io_set_swapper(nic)) {
DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
- return -1;
+ return -EIO;
}
/*
msleep(500);
val64 = readq(&bar0->sw_reset);
+ /* Ensure that it's safe to access registers by checking
+ * RIC_RUNNING bit is reset. Check is valid only for XframeII.
+ */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ for (i = 0; i < 50; i++) {
+ val64 = readq(&bar0->adapter_status);
+ if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
+ break;
+ msleep(10);
+ }
+ if (i == 50)
+ return -ENODEV;
+ }
+
/* Enable Receiving broadcasts */
add = &bar0->mac_cfg;
val64 = readq(&bar0->mac_cfg);
DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
dev->name);
DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
- return FAILURE;
+ return -ENODEV;
}
}
if (time > 10) {
DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n",
dev->name);
- return -1;
+ return -ENODEV;
}
msleep(50);
time++;
if (time > 10) {
DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
dev->name);
- return -1;
+ return -ENODEV;
}
time++;
msleep(50);
{
struct s2io_nic *sp = dev->priv;
+ /* Return if the device is already closed *
+ * Can happen when s2io_card_up failed in change_mtu *
+ */
+ if (!is_s2io_card_up(sp))
+ return 0;
+
netif_stop_queue(dev);
napi_disable(&sp->napi);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
static int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
struct s2io_nic *sp = dev->priv;
+ int ret = 0;
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
if (netif_running(dev)) {
s2io_card_down(sp);
netif_stop_queue(dev);
- if (s2io_card_up(sp)) {
+ ret = s2io_card_up(sp);
+ if (ret) {
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
__FUNCTION__);
+ return ret;
}
if (netif_queue_stopped(dev))
netif_wake_queue(dev);
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
}
- return 0;
+ return ret;
}
/**
unsigned long flags;
register u64 val64 = 0;
+ if (!is_s2io_card_up(sp))
+ return;
+
del_timer_sync(&sp->alarm_timer);
/* If s2io_set_link task is executing, wait till it completes. */
while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) {
u16 interruptible;
/* Initialize the H/W I/O registers */
- if (init_nic(sp) != 0) {
+ ret = init_nic(sp);
+ if (ret != 0) {
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
dev->name);
- s2io_reset(sp);
- return -ENODEV;
+ if (ret != -EIO)
+ s2io_reset(sp);
+ return ret;
}
/*
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "1.12"
+#define DRV_VERSION "1.13"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
{
struct net_device *dev = hw->dev[port];
struct skge_port *skge = netdev_priv(dev);
- u16 cmd = xm_read16(hw, port, XM_MMU_CMD);
xm_write16(hw, port, XM_IMSK, XM_IMSK_DISABLE);
- cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
- xm_write16(hw, port, XM_MMU_CMD, cmd);
-
- /* dummy read to ensure writing */
- xm_read16(hw, port, XM_MMU_CMD);
-
if (netif_carrier_ok(dev))
skge_link_down(skge);
}
static void genesis_reset(struct skge_hw *hw, int port)
{
const u8 zero[8] = { 0 };
+ u32 reg;
skge_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
xm_outhash(hw, port, XM_HSM, zero);
+
+ /* Flush TX and RX fifo */
+ reg = xm_read32(hw, port, XM_MODE);
+ xm_write32(hw, port, XM_MODE, reg | XM_MD_FTF);
+ xm_write32(hw, port, XM_MODE, reg | XM_MD_FRF);
}
}
xm_write16(hw, port, XM_RX_CMD, r);
-
/* We want short frames padded to 60 bytes. */
xm_write16(hw, port, XM_TX_CMD, XM_TX_AUTO_PAD);
- /*
- * Bump up the transmit threshold. This helps hold off transmit
- * underruns when we're blasting traffic from both ports at once.
- */
- xm_write16(hw, port, XM_TX_THR, 512);
+ /* Increase threshold for jumbo frames on dual port */
+ if (hw->ports > 1 && jumbo)
+ xm_write16(hw, port, XM_TX_THR, 1020);
+ else
+ xm_write16(hw, port, XM_TX_THR, 512);
/*
* Enable the reception of all error frames. This is is
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
- u32 reg;
+ unsigned retries = 1000;
+ u16 cmd;
+
+ /* Disable Tx and Rx */
+ cmd = xm_read16(hw, port, XM_MMU_CMD);
+ cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+ xm_write16(hw, port, XM_MMU_CMD, cmd);
genesis_reset(hw, port);
skge_write16(hw, B3_PA_CTRL,
port == 0 ? PA_CLR_TO_TX1 : PA_CLR_TO_TX2);
- /*
- * If the transfer sticks at the MAC the STOP command will not
- * terminate if we don't flush the XMAC's transmit FIFO !
- */
- xm_write32(hw, port, XM_MODE,
- xm_read32(hw, port, XM_MODE)|XM_MD_FTF);
-
-
/* Reset the MAC */
- skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+ do {
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
+ if (!(skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST))
+ break;
+ } while (--retries > 0);
/* For external PHYs there must be special handling */
if (hw->phy_type != SK_PHY_XMAC) {
- reg = skge_read32(hw, B2_GP_IO);
+ u32 reg = skge_read32(hw, B2_GP_IO);
if (port == 0) {
reg |= GP_DIR_0;
reg &= ~GP_IO_0;
xm_write32(hw, port, XM_MODE, XM_MD_FTF);
++dev->stats.tx_fifo_errors;
}
-
- if (status & XM_IS_RXF_OV) {
- xm_write32(hw, port, XM_MODE, XM_MD_FRF);
- ++dev->stats.rx_fifo_errors;
- }
}
static void genesis_link_up(struct skge_port *skge)
xm_write32(hw, port, XM_MODE, mode);
- /* Turn on detection of Tx underrun, Rx overrun */
+ /* Turn on detection of Tx underrun */
msk = xm_read16(hw, port, XM_IMSK);
- msk &= ~(XM_IS_RXF_OV | XM_IS_TXF_UR);
+ msk &= ~XM_IS_TXF_UR;
xm_write16(hw, port, XM_IMSK, msk);
xm_read16(hw, port, XM_ISRC);
TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
TX_IPG_JAM_DATA(TX_IPG_JAM_DEF));
- /* serial mode register */
- reg = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
- if (hw->dev[port]->mtu > 1500)
+ /* configure the Serial Mode Register */
+ reg = DATA_BLIND_VAL(DATA_BLIND_DEF)
+ | GM_SMOD_VLAN_ENA
+ | IPG_DATA_VAL(IPG_DATA_DEF);
+
+ if (hw->dev[port]->mtu > ETH_DATA_LEN)
reg |= GM_SMOD_JUMBO_ENA;
gma_write16(hw, port, GM_SERIAL_MODE, reg);
yukon_mac_init(hw, port);
spin_unlock_bh(&hw->phy_lock);
- /* Configure RAMbuffers */
- chunk = hw->ram_size / ((hw->ports + 1)*2);
+ /* Configure RAMbuffers - equally between ports and tx/rx */
+ chunk = (hw->ram_size - hw->ram_offset) / (hw->ports * 2);
ram_addr = hw->ram_offset + 2 * chunk * port;
skge_ramset(hw, rxqaddr[port], ram_addr, chunk);
static int skge_change_mtu(struct net_device *dev, int new_mtu)
{
- struct skge_port *skge = netdev_priv(dev);
- struct skge_hw *hw = skge->hw;
- int port = skge->port;
int err;
- u16 ctl, reg;
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
return 0;
}
- skge_write32(hw, B0_IMSK, 0);
- dev->trans_start = jiffies; /* prevent tx timeout */
- netif_stop_queue(dev);
- napi_disable(&skge->napi);
-
- ctl = gma_read16(hw, port, GM_GP_CTRL);
- gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
-
- skge_rx_clean(skge);
- skge_rx_stop(hw, port);
+ skge_down(dev);
dev->mtu = new_mtu;
- reg = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
- if (new_mtu > 1500)
- reg |= GM_SMOD_JUMBO_ENA;
- gma_write16(hw, port, GM_SERIAL_MODE, reg);
-
- skge_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
-
- err = skge_rx_fill(dev);
- wmb();
- if (!err)
- skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
- skge_write32(hw, B0_IMSK, hw->intr_mask);
-
+ err = skge_up(dev);
if (err)
dev_close(dev);
- else {
- gma_write16(hw, port, GM_GP_CTRL, ctl);
-
- napi_enable(&skge->napi);
- netif_wake_queue(dev);
- }
return err;
}
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/pci.h>
-#include <linux/aer.h>
#include <linux/ip.h>
#include <net/ip.h>
#include <linux/tcp.h>
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
- struct pci_dev *pdev = hw->pdev;
u32 reg;
- pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
- pci_read_config_dword(pdev, PCI_DEV_REG4, ®);
+ reg = sky2_pci_read32(hw, PCI_DEV_REG4);
/* set all bits to 0 except bits 15..12 and 8 */
reg &= P_ASPM_CONTROL_MSK;
- pci_write_config_dword(pdev, PCI_DEV_REG4, reg);
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg);
- pci_read_config_dword(pdev, PCI_DEV_REG5, ®);
+ reg = sky2_pci_read32(hw, PCI_DEV_REG5);
/* set all bits to 0 except bits 28 & 27 */
reg &= P_CTL_TIM_VMAIN_AV_MSK;
- pci_write_config_dword(pdev, PCI_DEV_REG5, reg);
+ sky2_pci_write32(hw, PCI_DEV_REG5, reg);
- pci_write_config_dword(pdev, PCI_CFG_REG_1, 0);
+ sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
reg = sky2_read32(hw, B2_GP_IO);
static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
{
- struct pci_dev *pdev = hw->pdev;
u32 reg1;
static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
- pci_read_config_dword(pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
/* Turn on/off phy power saving */
if (onoff)
reg1 &= ~phy_power[port];
if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 |= coma_mode[port];
- pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
- pci_read_config_dword(pdev, PCI_DEV_REG1, ®1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
udelay(100);
}
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
/* Turn on legacy PCI-Express PME mode */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 |= PCI_Y2_PME_LEGACY;
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
/* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_set_tx_stfwd(hw, port);
}
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ /* disable dynamic watermark */
+ reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
+ reg &= ~TX_DYN_WM_ENA;
+ sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
+ }
}
/* Assign Ram Buffer allocation to queue */
*/
if (otherdev && netif_running(otherdev) &&
(cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
- struct sky2_port *osky2 = netdev_priv(otherdev);
u16 cmd;
- pci_read_config_word(hw->pdev, cap + PCI_X_CMD, &cmd);
+ cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
cmd &= ~PCI_X_CMD_MAX_SPLIT;
- pci_write_config_word(hw->pdev, cap + PCI_X_CMD, cmd);
+ sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
- sky2->rx_csum = 0;
- osky2->rx_csum = 0;
}
if (netif_msg_ifup(sky2))
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
- pci_read_config_word(pdev, PCI_STATUS, &pci_err);
+ pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
pci_err);
- pci_write_config_word(pdev, PCI_STATUS,
+ sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
}
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
- int aer = pci_find_aer_capability(hw->pdev);
u32 err;
- if (aer) {
- pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
- &err);
- pci_cleanup_aer_uncorrect_error_status(pdev);
- } else {
- /* Either AER not configured, or not working
- * because of bad MMCONFIG, so just do recover
- * manually.
- */
- err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
- sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
- 0xfffffffful);
- }
-
+ err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
+ sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
}
if (status & Y2_HWE_L1_MASK)
static int __devinit sky2_init(struct sky2_hw *hw)
{
- int rc;
u8 t8;
/* Enable all clocks and check for bad PCI access */
- rc = pci_write_config_dword(hw->pdev, PCI_DEV_REG3, 0);
- if (rc)
- return rc;
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
/* clear PCI errors, if any */
- pci_read_config_word(pdev, PCI_STATUS, &status);
+ status = sky2_pci_read16(hw, PCI_STATUS);
status |= PCI_STATUS_ERROR_BITS;
- pci_write_config_word(pdev, PCI_STATUS, status);
+ sky2_pci_write16(hw, PCI_STATUS, status);
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (cap) {
- if (pci_find_aer_capability(pdev)) {
- /* Check for advanced error reporting */
- pci_cleanup_aer_uncorrect_error_status(pdev);
- pci_cleanup_aer_correct_error_status(pdev);
- } else {
- dev_warn(&pdev->dev,
- "PCI Express Advanced Error Reporting"
- " not configured or MMCONFIG problem?\n");
-
- sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
- 0xfffffffful);
- }
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
/* If error bit is stuck on ignore it */
if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
dev_info(&pdev->dev, "ignoring stuck error report bit\n");
-
- else if (pci_enable_pcie_error_reporting(pdev))
+ else
hwe_mask |= Y2_IS_PCI_EXP;
}
int i, err;
rtnl_lock();
- sky2_write32(hw, B0_IMSK, 0);
- sky2_read32(hw, B0_IMSK);
- napi_disable(&hw->napi);
-
for (i = 0; i < hw->ports; i++) {
dev = hw->dev[i];
if (netif_running(dev))
sky2_down(dev);
}
+ napi_disable(&hw->napi);
+ sky2_write32(hw, B0_IMSK, 0);
sky2_reset(hw);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
napi_enable(&hw->napi);
static int sky2_get_eeprom_len(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
u16 reg2;
- pci_read_config_word(sky2->hw->pdev, PCI_DEV_REG2, ®2);
+ reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
}
-static u32 sky2_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
+static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
{
u32 val;
- pci_write_config_word(pdev, cap + PCI_VPD_ADDR, offset);
+ sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
do {
- pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+ offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
} while (!(offset & PCI_VPD_ADDR_F));
- pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &val);
+ val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
return val;
}
-static void sky2_vpd_write(struct pci_dev *pdev, int cap, u16 offset, u32 val)
+static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
{
- pci_write_config_word(pdev, cap + PCI_VPD_DATA, val);
- pci_write_config_dword(pdev, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+ sky2_pci_write16(hw, cap + PCI_VPD_DATA, val);
+ sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
do {
- pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+ offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
} while (offset & PCI_VPD_ADDR_F);
}
eeprom->magic = SKY2_EEPROM_MAGIC;
while (length > 0) {
- u32 val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
+ u32 val = sky2_vpd_read(sky2->hw, cap, offset);
int n = min_t(int, length, sizeof(val));
memcpy(data, &val, n);
int n = min_t(int, length, sizeof(val));
if (n < sizeof(val))
- val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
+ val = sky2_vpd_read(sky2->hw, cap, offset);
memcpy(&val, data, n);
- sky2_vpd_write(sky2->hw->pdev, cap, offset, val);
+ sky2_vpd_write(sky2->hw, cap, offset, val);
length -= n;
data += n;
sky2->duplex = -1;
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
- sky2->rx_csum = 1;
+ sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
sky2->wol = wol;
spin_lock_init(&sky2->phy_lock);
*/
{
u32 reg;
- pci_read_config_dword(pdev,PCI_DEV_REG2, ®);
+ reg = sky2_pci_read32(hw, PCI_DEV_REG2);
reg &= ~PCI_REV_DESC;
- pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
+ sky2_pci_write32(hw, PCI_DEV_REG2, reg);
}
#endif
if (hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_FE_P)
- pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_reset(hw);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
+
+/* PCI config space access */
+static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read32(hw, Y2_CFG_SPC + reg);
+}
+
+static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read16(hw, Y2_CFG_SPC + reg);
+}
+
+static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
+{
+ sky2_write32(hw, Y2_CFG_SPC + reg, val);
+}
+
+static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
+{
+ sky2_write16(hw, Y2_CFG_SPC + reg, val);
+}
#endif
*/
static inline void smc911x_rcv(struct net_device *dev)
{
- struct smc911x_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
unsigned int pkt_len, status;
struct sk_buff *skb;
skb_put(skb,pkt_len-4);
#ifdef SMC_USE_DMA
{
+ struct smc911x_local *lp = netdev_priv(dev);
unsigned int fifo;
/* Lower the FIFO threshold if possible */
fifo = SMC_GET_FIFO_INT();
PRINT_PKT(skb->data, skb->len);
dev->last_rx = jiffies;
skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
+ netif_rx(skb);
spin_lock_irqsave(&lp->lock, flags);
pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16;
unsigned int multicast_table[2];
unsigned int mcr, update_multicast = 0;
unsigned long flags;
- /* table for flipping the order of 5 bits */
- static const unsigned char invert5[] =
- {0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0C, 0x1C,
- 0x02, 0x12, 0x0A, 0x1A, 0x06, 0x16, 0x0E, 0x1E,
- 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0D, 0x1D,
- 0x03, 0x13, 0x0B, 0x1B, 0x07, 0x17, 0x0F, 0x1F};
-
DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
cur_addr = dev->mc_list;
for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
- int position;
+ u32 position;
/* do we have a pointer here? */
if (!cur_addr)
if (!(*cur_addr->dmi_addr & 1))
continue;
- /* only use the low order bits */
- position = crc32_le(~0, cur_addr->dmi_addr, 6) & 0x3f;
+ /* upper 6 bits are used as hash index */
+ position = ether_crc(ETH_ALEN, cur_addr->dmi_addr)>>26;
- /* do some messy swapping to put the bit in the right spot */
- multicast_table[invert5[position&0x1F]&0x1] |=
- (1<<invert5[(position>>1)&0x1F]);
+ multicast_table[position>>5] |= 1 << (position&0x1f);
}
/* be sure I get rid of flags I might have set */
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_FALLING
-#elif CONFIG_SH_MAGIC_PANEL_R2
+#elif defined(CONFIG_SH_MAGIC_PANEL_R2)
#define SMC_USE_SH_DMA 0
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#elif defined(CONFIG_BFIN)
+#elif defined(CONFIG_BLACKFIN)
#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
#define RPC_LSA_DEFAULT RPC_LED_100_10
mutex_lock(&gp->pm_mutex);
- napi_disable(&gp->napi);
+ if (gp->opened)
+ napi_disable(&gp->napi);
spin_lock_irq(&gp->lock);
spin_lock(&gp->tx_lock);
- if (gp->running == 0)
- goto not_running;
-
if (gp->running) {
netif_stop_queue(gp->dev);
gem_set_link_modes(gp);
netif_wake_queue(gp->dev);
}
- not_running:
+
gp->reset_task_pending = 0;
spin_unlock(&gp->tx_lock);
spin_unlock_irq(&gp->lock);
- napi_enable(&gp->napi);
+ if (gp->opened)
+ napi_enable(&gp->napi);
mutex_unlock(&gp->pm_mutex);
}
pci_enable_wake(pci_dev, PCI_D3cold, 1);
/* Power down device*/
- pci_set_power_state(pci_dev, pci_choose_state (pci_dev,state));
pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state));
return 0;
}
struct net_device *dev = pci_get_drvdata(pci_dev);
u32 tmp;
- pci_restore_state(pci_dev);
pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
/* Re-initilize DM910X board */
dmfe_init_dm910x(dev);
if ((ugeth->phy_interface == PHY_INTERFACE_MODE_RMII) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UPSMR_RPM;
switch (ugeth->max_speed) {
if ((ugeth->phy_interface == PHY_INTERFACE_MODE_RMII) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
if (phydev->speed == SPEED_10)
upsmr |= UPSMR_R10M;
return PHY_INTERFACE_MODE_RGMII;
if (strcasecmp(phy_connection_type, "rgmii-id") == 0)
return PHY_INTERFACE_MODE_RGMII_ID;
+ if (strcasecmp(phy_connection_type, "rgmii-txid") == 0)
+ return PHY_INTERFACE_MODE_RGMII_TXID;
+ if (strcasecmp(phy_connection_type, "rgmii-rxid") == 0)
+ return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
case PHY_INTERFACE_MODE_GMII:
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
max_speed = SPEED_1000;
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
if (urb->status < 0)
- printk(KERN_DEBUG "dm_write_async_callback() failed with %d",
+ printk(KERN_DEBUG "dm_write_async_callback() failed with %d\n",
urb->status);
kfree(req);
static int velocity_init_rd_ring(struct velocity_info *vptr)
{
int ret;
+ int mtu = vptr->dev->mtu;
+
+ vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
vptr->rd_info = kcalloc(vptr->options.numrx,
sizeof(struct velocity_rd_info), GFP_KERNEL);
struct velocity_info *vptr = netdev_priv(dev);
int ret;
- vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
-
ret = velocity_init_rings(vptr);
if (ret < 0)
goto out;
velocity_free_rd_ring(vptr);
dev->mtu = new_mtu;
- if (new_mtu > 8192)
- vptr->rx_buf_sz = 9 * 1024;
- else if (new_mtu > 4096)
- vptr->rx_buf_sz = 8192;
- else
- vptr->rx_buf_sz = 4 * 1024;
ret = velocity_init_rd_ring(vptr);
if (ret < 0)
if (vi->num < vi->max / 2)
try_fill_recv(vi);
- /* All done? */
- if (!skb) {
+ /* Out of packets? */
+ if (received < budget) {
netif_rx_complete(vi->dev, napi);
if (unlikely(!vi->rvq->vq_ops->restart(vi->rvq))
&& netif_rx_reschedule(vi->dev, napi))
static void virtnet_remove(struct virtio_device *vdev)
{
- unregister_netdev(vdev->priv);
- free_netdev(vdev->priv);
+ struct virtnet_info *vi = vdev->priv;
+
+ vdev->config->del_vq(vi->svq);
+ vdev->config->del_vq(vi->rvq);
+ unregister_netdev(vi->dev);
+ free_netdev(vi->dev);
}
static struct virtio_device_id id_table[] = {
static void b43_print_fw_helptext(struct b43_wl *wl)
{
b43err(wl, "You must go to "
- "http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware "
+ "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware "
"and download the correct firmware (version 4).\n");
}
}
dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
if (dyn_tssi2dbm == NULL) {
- b43err(dev->wl, "Could not allocate memory"
+ b43err(dev->wl, "Could not allocate memory "
"for tssi2dbm table\n");
return -ENOMEM;
}
err = ssb_dma_set_mask(dev->dev, dmamask);
if (err) {
-#ifdef BCM43XX_PIO
+#ifdef CONFIG_B43LEGACY_PIO
b43legacywarn(dev->wl, "DMA for this device not supported. "
"Falling back to PIO\n");
dev->__using_pio = 1;
static void b43legacy_print_fw_helptext(struct b43legacy_wl *wl)
{
b43legacyerr(wl, "You must go to http://linuxwireless.org/en/users/"
- "Drivers/bcm43xx#devicefirmware "
+ "Drivers/b43#devicefirmware "
"and download the correct firmware (version 3).\n");
}
phy->idle_tssi = 62;
dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
if (dyn_tssi2dbm == NULL) {
- b43legacyerr(dev->wl, "Could not allocate memory"
+ b43legacyerr(dev->wl, "Could not allocate memory "
"for tssi2dbm table\n");
return -ENOMEM;
}
}
dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
if (dyn_tssi2dbm == NULL) {
- printk(KERN_ERR PFX "Could not allocate memory"
+ printk(KERN_ERR PFX "Could not allocate memory "
"for tssi2dbm table\n");
return -ENOMEM;
}
int i;
hw = iwl_get_hw_mode(priv, priv->phymode);
+ if (!hw) {
+ IWL_ERROR("Failed to set rate: unable to get hw mode\n");
+ return;
+ }
priv->active_rate = 0;
priv->active_rate_basic = 0;
DECLARE_MAC_BUF(mac);
IWL_DEBUG_MAC80211("enter: id %d, type %d\n", conf->if_id, conf->type);
- if (conf->mac_addr)
- IWL_DEBUG_MAC80211("enter: MAC %s\n",
- print_mac(mac, conf->mac_addr));
if (priv->interface_id) {
IWL_DEBUG_MAC80211("leave - interface_id != 0\n");
- return 0;
+ return -EOPNOTSUPP;
}
spin_lock_irqsave(&priv->lock, flags);
spin_unlock_irqrestore(&priv->lock, flags);
mutex_lock(&priv->mutex);
+
+ if (conf->mac_addr) {
+ IWL_DEBUG_MAC80211("Set: %s\n", print_mac(mac, conf->mac_addr));
+ memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+ }
+
iwl_set_mode(priv, conf->type);
IWL_DEBUG_MAC80211("leave\n");
{
iwl_hw_cancel_deferred_work(priv);
+ cancel_delayed_work_sync(&priv->init_alive_start);
cancel_delayed_work(&priv->scan_check);
cancel_delayed_work(&priv->alive_start);
cancel_delayed_work(&priv->post_associate);
int i;
hw = iwl_get_hw_mode(priv, priv->phymode);
+ if (!hw) {
+ IWL_ERROR("Failed to set rate: unable to get hw mode\n");
+ return;
+ }
priv->active_rate = 0;
priv->active_rate_basic = 0;
DECLARE_MAC_BUF(mac);
IWL_DEBUG_MAC80211("enter: id %d, type %d\n", conf->if_id, conf->type);
- if (conf->mac_addr)
- IWL_DEBUG_MAC80211("enter: MAC %s\n",
- print_mac(mac, conf->mac_addr));
if (priv->interface_id) {
IWL_DEBUG_MAC80211("leave - interface_id != 0\n");
spin_unlock_irqrestore(&priv->lock, flags);
mutex_lock(&priv->mutex);
+
+ if (conf->mac_addr) {
+ IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr));
+ memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+ }
iwl_set_mode(priv, conf->type);
IWL_DEBUG_MAC80211("leave\n");
{
iwl_hw_cancel_deferred_work(priv);
+ cancel_delayed_work_sync(&priv->init_alive_start);
cancel_delayed_work(&priv->scan_check);
cancel_delayed_work(&priv->alive_start);
cancel_delayed_work(&priv->post_associate);
#define IF_CS_H_IC_TX_OVER 0x0001
#define IF_CS_H_IC_RX_OVER 0x0002
#define IF_CS_H_IC_DNLD_OVER 0x0004
-#define IF_CS_H_IC_HOST_EVENT 0x0008
+#define IF_CS_H_IC_POWER_DOWN 0x0008
+#define IF_CS_H_IC_HOST_EVENT 0x0010
#define IF_CS_H_IC_MASK 0x001f
#define IF_CS_H_INT_MASK 0x00000004
#ifdef WIRELESS_EXT
dev->wireless_handlers = (struct iw_handler_def *)&libertas_handler_def;
#endif
-#define NETIF_F_DYNALLOC 16
- dev->features |= NETIF_F_DYNALLOC;
dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
dev->set_multicast_list = libertas_set_multicast_list;
#ifdef WIRELESS_EXT
mesh_dev->wireless_handlers = (struct iw_handler_def *)&mesh_handler_def;
#endif
-#define NETIF_F_DYNALLOC 16
-
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
&& (ext->key_len != KEY_LEN_WPA_TKIP))
|| ((alg == IW_ENCODE_ALG_CCMP)
&& (ext->key_len != KEY_LEN_WPA_AES))) {
- lbs_deb_wext("invalid size %d for key of alg"
+ lbs_deb_wext("invalid size %d for key of alg "
"type %d\n",
ext->key_len,
alg);
for (i = 0; i < 6; i++)
dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i);
- printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx"
+ printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, "
"id %c%c, hw_addr %s\n",
dev->name, dev->base_addr, dev->irq,
(u_long) ramBase,
buf = kmalloc(0x2020, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "prism54usb: cannot allocate memory for"
+ printk(KERN_ERR "prism54usb: cannot allocate memory for "
"eeprom readback!\n");
return -ENOMEM;
}
}
static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
- int maxpacket, struct sk_buff *skb)
+ struct sk_buff *skb)
{
int length;
* but it must _not_ be a multiple of the USB packet size.
*/
length = roundup(skb->len, 2);
- length += (2 * !(length % maxpacket));
+ length += (2 * !(length % rt2x00dev->usb_maxpacket));
return length;
}
struct data_entry *beacon;
struct data_entry *guardian;
int pipe = usb_sndbulkpipe(usb_dev, 1);
- int max_packet = usb_maxpacket(usb_dev, pipe, 1);
int length;
/*
ring->desc_size),
skb->len - ring->desc_size, control);
- length = rt2500usb_get_tx_data_len(rt2x00dev, max_packet, skb);
+ length = rt2500usb_get_tx_data_len(rt2x00dev, skb);
usb_fill_bulk_urb(beacon->priv, usb_dev, pipe,
skb->data, length, rt2500usb_beacondone, beacon);
int (*write_tx_data) (struct rt2x00_dev *rt2x00dev,
struct data_ring *ring, struct sk_buff *skb,
struct ieee80211_tx_control *control);
- int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, int maxpacket,
+ int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
unsigned int queue);
*/
u32 *rf;
+ /*
+ * USB Max frame size (for rt2500usb & rt73usb).
+ */
+ u16 usb_maxpacket;
+
/*
* Current TX power value.
*/
interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
struct data_entry *entry = rt2x00_get_data_entry(ring);
int pipe = usb_sndbulkpipe(usb_dev, 1);
- int max_packet = usb_maxpacket(usb_dev, pipe, 1);
u32 length;
if (rt2x00_ring_full(ring)) {
* length of the data to usb_fill_bulk_urb. Pass the skb
* to the driver to determine what the length should be.
*/
- length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev,
- max_packet, skb);
+ length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb);
/*
* Initialize URB and send the frame to the device.
rt2x00dev->ops = ops;
rt2x00dev->hw = hw;
+ rt2x00dev->usb_maxpacket =
+ usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1);
+ if (!rt2x00dev->usb_maxpacket)
+ rt2x00dev->usb_maxpacket = 1;
+
retval = rt2x00usb_alloc_reg(rt2x00dev);
if (retval)
goto exit_free_device;
}
static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
- int maxpacket, struct sk_buff *skb)
+ struct sk_buff *skb)
{
int length;
* but it must _not_ be a multiple of the USB packet size.
*/
length = roundup(skb->len, 4);
- length += (4 * !(length % maxpacket));
+ length += (4 * !(length % rt2x00dev->usb_maxpacket));
return length;
}
DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX",
res->flags, res->start, res->end);
}
- if ((i != PCI_ROM_RESOURCE) ||
- (res->flags & IORESOURCE_ROM_ENABLE))
- pci_claim_resource(dev, i);
+
+ /*
+ ** FIXME: this will result in whinging for devices
+ ** that share expansion ROMs (think quad tulip), but
+ ** isn't harmful.
+ */
+ pci_claim_resource(dev, i);
}
#ifdef FBB_SUPPORT
char name[SLOT_NAME_SIZE];
};
-/**
+/*
* struct acpiphp_bridge - PCI bridge information
*
* for each bridge device in ACPI namespace
};
-/**
+/*
* struct acpiphp_slot - PCI slot information
*
* PCI slot information for each *physical* PCI slot
};
-/**
+/*
* struct acpiphp_func - PCI function information
*
* PCI function information for each object in ACPI namespace
u32 flags; /* see below */
};
-/**
+/*
* struct acpiphp_attention_info - device specific attention registration
*
* ACPI has no generic method of setting/getting attention status
* acpiphp_register_attention - set attention LED callback
* @info: must be completely filled with LED callbacks
*
- * Description: this is used to register a hardware specific ACPI
+ * Description: This is used to register a hardware specific ACPI
* driver that manipulates the attention LED. All the fields in
* info must be set.
- **/
+ */
int acpiphp_register_attention(struct acpiphp_attention_info *info)
{
int retval = -EINVAL;
* acpiphp_unregister_attention - unset attention LED callback
* @info: must match the pointer used to register
*
- * Description: this is used to un-register a hardware specific acpi
+ * Description: This is used to un-register a hardware specific acpi
* driver that manipulates the attention LED. The pointer to the
* info struct must be the same as the one used to set it.
- **/
+ */
int acpiphp_unregister_attention(struct acpiphp_attention_info *info)
{
int retval = -EINVAL;
* @hotplug_slot: slot to enable
*
* Actual tasks are done in acpiphp_enable_slot()
- *
*/
static int enable_slot(struct hotplug_slot *hotplug_slot)
{
* @hotplug_slot: slot to disable
*
* Actual tasks are done in acpiphp_disable_slot()
- *
*/
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
}
- /**
- * set_attention_status - set attention LED
+/**
+ * set_attention_status - set attention LED
* @hotplug_slot: slot to set attention LED on
* @status: value to set attention LED to (0 or 1)
*
* attention status LED, so we use a callback that
* was registered with us. This allows hardware specific
* ACPI implementations to blink the light for us.
- **/
+ */
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
{
int retval = -ENODEV;
*
* Some platforms may not implement _STA method properly.
* In that case, the value returned may not be reliable.
- *
*/
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
}
- /**
+/**
* get_attention_status - get attention LED status
* @hotplug_slot: slot to get status from
* @value: returns with value of attention LED
* ACPI doesn't have known method to determine the state
* of the attention status LED, so we use a callback that
* was registered with us. This allows hardware specific
- * ACPI implementations to determine its state
- **/
+ * ACPI implementations to determine its state.
+ */
static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
int retval = -EINVAL;
* @value: pointer to store status
*
* ACPI doesn't provide any formal means to access latch status.
- * Instead, we fake latch status from _STA
- *
+ * Instead, we fake latch status from _STA.
*/
static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
* @value: pointer to store status
*
* ACPI doesn't provide any formal means to access adapter status.
- * Instead, we fake adapter status from _STA
- *
+ * Instead, we fake adapter status from _STA.
*/
static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
* 2. has _PS0 method
* 3. has _PS3 method
* 4. ..
- *
*/
static int is_ejectable(acpi_handle handle)
{
/**
- * acpiphp_max_busnr - return the highest reserved bus number under
- * the given bus.
+ * acpiphp_max_busnr - return the highest reserved bus number under the given bus.
* @bus: bus to start search with
- *
*/
static unsigned char acpiphp_max_busnr(struct pci_bus *bus)
{
/**
* acpiphp_bus_add - add a new bus to acpi subsystem
* @func: acpiphp_func of the bridge
- *
*/
static int acpiphp_bus_add(struct acpiphp_func *func)
{
/**
* acpiphp_bus_trim - trim a bus from acpi subsystem
* @handle: handle to acpi namespace
- *
*/
static int acpiphp_bus_trim(acpi_handle handle)
{
*
* This function should be called per *physical slot*,
* not per each slot object in ACPI namespace.
- *
*/
static int enable_device(struct acpiphp_slot *slot)
{
/**
* disable_device - disable a slot
+ * @slot: ACPI PHP slot
*/
static int disable_device(struct acpiphp_slot *slot)
{
/**
* get_slot_status - get ACPI slot status
+ * @slot: ACPI PHP slot
*
- * if a slot has _STA for each function and if any one of them
- * returned non-zero status, return it
+ * If a slot has _STA for each function and if any one of them
+ * returned non-zero status, return it.
*
- * if a slot doesn't have _STA and if any one of its functions'
- * configuration space is configured, return 0x0f as a _STA
+ * If a slot doesn't have _STA and if any one of its functions'
+ * configuration space is configured, return 0x0f as a _STA.
*
- * otherwise return 0
+ * Otherwise return 0.
*/
static unsigned int get_slot_status(struct acpiphp_slot *slot)
{
/**
* acpiphp_eject_slot - physically eject the slot
+ * @slot: ACPI PHP slot
*/
int acpiphp_eject_slot(struct acpiphp_slot *slot)
{
/**
* acpiphp_check_bridge - re-enumerate devices
+ * @bridge: where to begin re-enumeration
*
* Iterate over all slots under this bridge and make sure that if a
* card is present they are enabled, and if not they are disabled.
/**
* handle_hotplug_event_bridge - handle ACPI event on bridges
- *
* @handle: Notify()'ed acpi_handle
* @type: Notify code
* @context: pointer to acpiphp_bridge structure
*
- * handles ACPI event notification on {host,p2p} bridges
- *
+ * Handles ACPI event notification on {host,p2p} bridges.
*/
static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context)
{
/**
* handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
- *
* @handle: Notify()'ed acpi_handle
* @type: Notify code
* @context: pointer to acpiphp_func structure
*
- * handles ACPI event notification on slots
- *
+ * Handles ACPI event notification on slots.
*/
static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
{
/**
* acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures
- *
*/
int __init acpiphp_glue_init(void)
{
/**
* acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures
*
- * This function frees all data allocated in acpiphp_glue_init()
+ * This function frees all data allocated in acpiphp_glue_init().
*/
void acpiphp_glue_exit(void)
{
* acpiphp_for_each_slot - call function for each slot
* @fn: callback function
* @data: context to be passed to callback function
- *
*/
static int acpiphp_for_each_slot(acpiphp_callback fn, void *data)
{
/**
* acpiphp_enable_slot - power on slot
+ * @slot: ACPI PHP slot
*/
int acpiphp_enable_slot(struct acpiphp_slot *slot)
{
/**
* acpiphp_disable_slot - power off slot
+ * @slot: ACPI PHP slot
*/
int acpiphp_disable_slot(struct acpiphp_slot *slot)
{
* ibm_slot_from_id - workaround for bad ibm hardware
* @id: the slot number that linux refers to the slot by
*
- * Description: this method returns the aCPI slot descriptor
+ * Description: This method returns the aCPI slot descriptor
* corresponding to the Linux slot number. This descriptor
* has info about the aPCI slot id and attention status.
* This descriptor must be freed using kfree when done.
- **/
+ */
static union apci_descriptor *ibm_slot_from_id(int id)
{
int ind = 0, size;
* @slot: the hotplug_slot to work with
* @status: what to set the LED to (0 or 1)
*
- * Description: this method is registered with the acpiphp module as a
- * callback to do the device specific task of setting the LED status
- **/
+ * Description: This method is registered with the acpiphp module as a
+ * callback to do the device specific task of setting the LED status.
+ */
static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
{
union acpi_object args[2];
* @slot: the hotplug_slot to work with
* @status: returns what the LED is set to (0 or 1)
*
- * Description: this method is registered with the acpiphp module as a
- * callback to do the device specific task of getting the LED status
+ * Description: This method is registered with the acpiphp module as a
+ * callback to do the device specific task of getting the LED status.
*
* Because there is no direct method of getting the LED status directly
* from an ACPI call, we read the aPCI table and parse out our
* slot descriptor to read the status from that.
- **/
+ */
static int ibm_get_attention_status(struct hotplug_slot *slot, u8 *status)
{
union apci_descriptor *ibm_slot;
* @event: the event info (device specific)
* @context: passed context (our notification struct)
*
- * Description: this method is registered as a callback with the ACPI
- * subsystem it is called when this device has an event to notify the OS of
+ * Description: This method is registered as a callback with the ACPI
+ * subsystem it is called when this device has an event to notify the OS of.
*
* The events actually come from the device as two events that get
* synthesized into one event with data by this function. The event
* From section 5.6.2.2 of the ACPI 2.0 spec, I understand that the OSPM will
* only re-enable the interrupt that causes this event AFTER this method
* has returned, thereby enforcing serial access for the notification struct.
- **/
+ */
static void ibm_handle_events(acpi_handle handle, u32 event, void *context)
{
u8 detail = event & 0x0f;
* ibm_get_table_from_acpi - reads the APLS buffer from ACPI
* @bufp: address to pointer to allocate for the table
*
- * Description: this method reads the APLS buffer in from ACPI and
+ * Description: This method reads the APLS buffer in from ACPI and
* stores the "stripped" table into a single buffer
- * it allocates and passes the address back in bufp
+ * it allocates and passes the address back in bufp.
*
* If NULL is passed in as buffer, this method only calculates
* the size of the table and returns that without filling
- * in the buffer
+ * in the buffer.
*
- * returns < 0 on error or the size of the table on success
- **/
+ * Returns < 0 on error or the size of the table on success.
+ */
static int ibm_get_table_from_acpi(char **bufp)
{
union acpi_object *package;
/**
* ibm_read_apci_table - callback for the sysfs apci_table file
* @kobj: the kobject this binary attribute is a part of
+ * @bin_attr: struct bin_attribute for this file
* @buffer: the kernel space buffer to fill
* @pos: the offset into the file
* @size: the number of bytes requested
*
- * Description: gets registered with sysfs as the reader callback
- * to be executed when /sys/bus/pci/slots/apci_table gets read
+ * Description: Gets registered with sysfs as the reader callback
+ * to be executed when /sys/bus/pci/slots/apci_table gets read.
*
* Since we don't get notified on open and close for this file,
* things get really tricky here...
- * our solution is to only allow reading the table in all at once
- **/
+ * our solution is to only allow reading the table in all at once.
+ */
static ssize_t ibm_read_apci_table(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t size)
* @context: a pointer to our handle to fill when we find the device
* @rv: a return value to fill if desired
*
- * Description: used as a callback when calling acpi_walk_namespace
+ * Description: Used as a callback when calling acpi_walk_namespace
* to find our device. When this method returns non-zero
- * acpi_walk_namespace quits its search and returns our value
- **/
+ * acpi_walk_namespace quits its search and returns our value.
+ */
static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
u32 lvl, void *context, void **rv)
{
/**
* detect_SMBIOS_pointer - find the System Management BIOS Table in mem region.
- *
* @begin: begin pointer for region to be scanned.
* @end: end pointer for region to be scanned.
*
- * Returns pointer to the head of the SMBIOS tables (or NULL)
- *
+ * Returns pointer to the head of the SMBIOS tables (or %NULL).
*/
static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *end)
{
/**
* init_SERR - Initializes the per slot SERR generation.
+ * @ctrl: controller to use
*
* For unexpected switch opens
- *
*/
static int init_SERR(struct controller * ctrl)
{
/**
* get_subsequent_smbios_entry: get the next entry from bios table.
- *
- * Gets the first entry if previous == NULL
- * Otherwise, returns the next entry
- * Uses global SMBIOS Table pointer
- *
+ * @smbios_start: where to start in the SMBIOS table
+ * @smbios_table: location of the SMBIOS table
* @curr: %NULL or pointer to previously returned structure
*
- * returns a pointer to an SMBIOS structure or NULL if none found
+ * Gets the first entry if previous == NULL;
+ * otherwise, returns the next entry.
+ * Uses global SMBIOS Table pointer.
+ *
+ * Returns a pointer to an SMBIOS structure or NULL if none found.
*/
static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
void __iomem *smbios_table,
/**
- * get_SMBIOS_entry
- *
- * @type:SMBIOS structure type to be returned
+ * get_SMBIOS_entry - return the requested SMBIOS entry or %NULL
+ * @smbios_start: where to start in the SMBIOS table
+ * @smbios_table: location of the SMBIOS table
+ * @type: SMBIOS structure type to be returned
* @previous: %NULL or pointer to previously returned structure
*
- * Gets the first entry of the specified type if previous == NULL
+ * Gets the first entry of the specified type if previous == %NULL;
* Otherwise, returns the next entry of the given type.
- * Uses global SMBIOS Table pointer
- * Uses get_subsequent_smbios_entry
+ * Uses global SMBIOS Table pointer.
+ * Uses get_subsequent_smbios_entry.
*
- * returns a pointer to an SMBIOS structure or %NULL if none found
+ * Returns a pointer to an SMBIOS structure or %NULL if none found.
*/
static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
void __iomem *smbios_table,
/**
* cpqhp_set_attention_status - Turns the Amber LED for a slot on or off
- *
+ * @ctrl: struct controller to use
+ * @func: PCI device/function info
+ * @status: LED control flag: 1 = LED on, 0 = LED off
*/
static int
cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
/**
* set_attention_status - Turns the Amber LED for a slot on or off
- *
+ * @hotplug_slot: slot to change LED on
+ * @status: LED control flag
*/
static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
{
}
/**
- * cpqhp_find_slot: find the struct slot of given device
+ * cpqhp_find_slot - find the struct slot of given device
* @ctrl: scan lots of this controller
* @device: the device id to find
*/
/**
- * sort_by_size: sort nodes on the list by their length, smallest first.
+ * sort_by_size - sort nodes on the list by their length, smallest first.
* @head: list to sort
- *
*/
static int sort_by_size(struct pci_resource **head)
{
/**
- * sort_by_max_size: sort nodes on the list by their length, largest first.
+ * sort_by_max_size - sort nodes on the list by their length, largest first.
* @head: list to sort
- *
*/
static int sort_by_max_size(struct pci_resource **head)
{
/**
- * do_pre_bridge_resource_split: find node of resources that are unused
- *
+ * do_pre_bridge_resource_split - find node of resources that are unused
+ * @head: new list head
+ * @orig_head: original list head
+ * @alignment: max node size (?)
*/
static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head,
struct pci_resource **orig_head, u32 alignment)
/**
- * do_bridge_resource_split: find one node of resources that aren't in use
- *
+ * do_bridge_resource_split - find one node of resources that aren't in use
+ * @head: list head
+ * @alignment: max node size (?)
*/
static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment)
{
/**
- * get_io_resource: find first node of given size not in ISA aliasing window.
+ * get_io_resource - find first node of given size not in ISA aliasing window.
* @head: list to search
* @size: size of node to find, must be a power of two.
*
- * Description: this function sorts the resource list by size and then returns
+ * Description: This function sorts the resource list by size and then returns
* returns the first node of "size" length that is not in the ISA aliasing
* window. If it finds a node larger than "size" it will split it up.
- *
*/
static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size)
{
/**
- * get_max_resource: get largest node which has at least the given size.
+ * get_max_resource - get largest node which has at least the given size.
* @head: the list to search the node in
* @size: the minimum size of the node to find
*
/**
- * get_resource: find resource of given size and split up larger ones.
+ * get_resource - find resource of given size and split up larger ones.
* @head: the list to search for resources
* @size: the size limit to use
*
/**
- * cpqhp_resource_sort_and_combine: sort nodes by base addresses and clean up.
+ * cpqhp_resource_sort_and_combine - sort nodes by base addresses and clean up
* @head: the list to sort and clean up
*
* Description: Sorts all of the nodes in the list in ascending order by
* their base addresses. Also does garbage collection by
* combining adjacent nodes.
*
- * returns 0 if success
+ * Returns %0 if success.
*/
int cpqhp_resource_sort_and_combine(struct pci_resource **head)
{
/**
* cpqhp_slot_create - Creates a node and adds it to the proper bus.
- * @busnumber - bus where new node is to be located
+ * @busnumber: bus where new node is to be located
*
- * Returns pointer to the new node or NULL if unsuccessful
+ * Returns pointer to the new node or %NULL if unsuccessful.
*/
struct pci_func *cpqhp_slot_create(u8 busnumber)
{
* slot_remove - Removes a node from the linked list of slots.
* @old_slot: slot to remove
*
- * Returns 0 if successful, !0 otherwise.
+ * Returns %0 if successful, !0 otherwise.
*/
static int slot_remove(struct pci_func * old_slot)
{
* bridge_slot_remove - Removes a node from the linked list of slots.
* @bridge: bridge to remove
*
- * Returns 0 if successful, !0 otherwise.
+ * Returns %0 if successful, !0 otherwise.
*/
static int bridge_slot_remove(struct pci_func *bridge)
{
* cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed
* @bus: bus to find
* @device: device to find
- * @index: is 0 for first function found, 1 for the second...
+ * @index: is %0 for first function found, %1 for the second...
*
* Returns pointer to the node if successful, %NULL otherwise.
*/
/**
- * set_controller_speed - set the frequency and/or mode of a specific
- * controller segment.
- *
+ * set_controller_speed - set the frequency and/or mode of a specific controller segment.
* @ctrl: controller to change frequency/mode for.
* @adapter_speed: the speed of the adapter we want to match.
* @hp_slot: the slot number where the adapter is installed.
*
- * Returns 0 if we successfully change frequency and/or mode to match the
+ * Returns %0 if we successfully change frequency and/or mode to match the
* adapter speed.
- *
*/
static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
{
/**
* board_replaced - Called after a board has been replaced in the system.
+ * @func: PCI device/function information
+ * @ctrl: hotplug controller
*
- * This is only used if we don't have resources for hot add
- * Turns power on for the board
- * Checks to see if board is the same
- * If board is same, reconfigures it
+ * This is only used if we don't have resources for hot add.
+ * Turns power on for the board.
+ * Checks to see if board is the same.
+ * If board is same, reconfigures it.
* If board isn't same, turns it back off.
- *
*/
static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
{
/**
* board_added - Called after a board has been added to the system.
+ * @func: PCI device/function info
+ * @ctrl: hotplug controller
*
- * Turns power on for the board
- * Configures board
- *
+ * Turns power on for the board.
+ * Configures board.
*/
static u32 board_added(struct pci_func *func, struct controller *ctrl)
{
/**
- * remove_board - Turns off slot and LED's
- *
+ * remove_board - Turns off slot and LEDs
+ * @func: PCI device/function info
+ * @replace_flag: whether replacing or adding a new device
+ * @ctrl: target controller
*/
static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl)
{
/**
- * cpqhp_pushbutton_thread
+ * cpqhp_pushbutton_thread - handle pushbutton events
+ * @slot: target slot (struct)
*
- * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
* Handles all pending events and exits.
- *
*/
void cpqhp_pushbutton_thread(unsigned long slot)
{
}
/**
- * switch_leds: switch the leds, go from one site to the other.
+ * switch_leds - switch the leds, go from one site to the other.
* @ctrl: controller to use
* @num_of_slots: number of slots to use
+ * @work_LED: LED control value
* @direction: 1 to start from the left side, 0 to start right.
*/
static void switch_leds(struct controller *ctrl, const int num_of_slots,
}
/**
- * hardware_test - runs hardware tests
+ * cpqhp_hardware_test - runs hardware tests
+ * @ctrl: target controller
+ * @test_num: the number written to the "test" file in sysfs.
*
* For hot plug ctrl folks to play with.
- * test_num is the number written to the "test" file in sysfs
- *
*/
int cpqhp_hardware_test(struct controller *ctrl, int test_num)
{
/**
* configure_new_device - Configures the PCI header information of one board.
- *
* @ctrl: pointer to controller structure
* @func: pointer to function structure
* @behind_bridge: 1 if this is a recursive call, 0 if not
* @resources: pointer to set of resource lists
*
- * Returns 0 if success
- *
+ * Returns 0 if success.
*/
static u32 configure_new_device(struct controller * ctrl, struct pci_func * func,
u8 behind_bridge, struct resource_lists * resources)
/**
* configure_new_function - Configures the PCI header information of one device
- *
* @ctrl: pointer to controller structure
* @func: pointer to function structure
* @behind_bridge: 1 if this is a recursive call, 0 if not
* @resources: pointer to set of resource lists
*
* Calls itself recursively for bridged devices.
- * Returns 0 if success
- *
+ * Returns 0 if success.
*/
static int configure_new_function(struct controller *ctrl, struct pci_func *func,
u8 behind_bridge,
}
/**
- * Rescan slot.
- * Tries hard not to re-enable already existing devices
- * also handles scanning of subfunctions
+ * pci_rescan_slot - Rescan slot
+ * @temp: Device template. Should be set: bus and devfn.
*
- * @param temp Device template. Should be set: bus and devfn.
+ * Tries hard not to re-enable already existing devices;
+ * also handles scanning of subfunctions.
*/
static void pci_rescan_slot(struct pci_dev *temp)
{
/**
- * Rescan PCI bus.
- * call pci_rescan_slot for each possible function of the bus
+ * pci_rescan_bus - Rescan PCI bus
+ * @bus: the PCI bus to rescan
*
- * @param bus
+ * Call pci_rescan_slot for each possible function of the bus.
*/
static void pci_rescan_bus(const struct pci_bus *bus)
{
/**
* board_added - Called after a board has been added to the system.
+ * @p_slot: &slot where board is added
*
- * Turns power on for the board
- * Configures board
- *
+ * Turns power on for the board.
+ * Configures board.
*/
static int board_added(struct slot *p_slot)
{
}
/**
- * remove_board - Turns off slot and LED's
- *
+ * remove_board - Turns off slot and LEDs
+ * @p_slot: slot where board is being removed
*/
static int remove_board(struct slot *p_slot)
{
};
/**
- * pciehp_pushbutton_thread
+ * pciehp_power_thread - handle pushbutton events
+ * @work: &struct work_struct describing work to be done
*
- * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
* Handles all pending events and exits.
- *
*/
static void pciehp_power_thread(struct work_struct *work)
{
/**
* find_php_slot - return hotplug slot structure for device node
+ * @dn: target &device_node
*
* This routine will return the hotplug slot structure
* for a given device node. Note that built-in PCI slots
* dlpar_add_slot - DLPAR add an I/O Slot
* @drc_name: drc-name of newly added slot
*
- * Make the hotplug module and the kernel aware
- * of a newly added I/O Slot.
- * Return Codes -
+ * Make the hotplug module and the kernel aware of a newly added I/O Slot.
+ * Return Codes:
* 0 Success
* -ENODEV Not a valid drc_name
* -EINVAL Slot already added
/**
* dlpar_remove_vio_slot - DLPAR remove a virtual I/O Slot
* @drc_name: drc-name of newly added slot
+ * @dn: &device_node
*
- * Remove the kernel and hotplug representations
- * of an I/O Slot.
+ * Remove the kernel and hotplug representations of an I/O Slot.
* Return Codes:
* 0 Success
* -EINVAL Vio dev doesn't exist
}
/**
- * dlpar_remove_slot - DLPAR remove a PCI I/O Slot
+ * dlpar_remove_pci_slot - DLPAR remove a PCI I/O Slot
* @drc_name: drc-name of newly added slot
+ * @dn: &device_node
*
- * Remove the kernel and hotplug representations
- * of a PCI I/O Slot.
+ * Remove the kernel and hotplug representations of a PCI I/O Slot.
* Return Codes:
* 0 Success
* -ENODEV Not a valid drc_name
* dlpar_remove_slot - DLPAR remove an I/O Slot
* @drc_name: drc-name of newly added slot
*
- * Remove the kernel and hotplug representations
- * of an I/O Slot.
+ * Remove the kernel and hotplug representations of an I/O Slot.
* Return Codes:
* 0 Success
* -ENODEV Not a valid drc_name
/**
* set_attention_status - set attention LED
+ * @hotplug_slot: target &hotplug_slot
+ * @value: LED control value
+ *
* echo 0 > attention -- set LED OFF
* echo 1 > attention -- set LED ON
* echo 2 > attention -- set LED ID(identify, light is blinking)
- *
*/
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
{
/**
* get_attention_status - get attention LED status
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
*/
static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value)
{
/**
* is_php_dn() - return 1 if this is a hotpluggable pci slot, else 0
+ * @dn: target &device_node
+ * @indexes: passed to get_children_props()
+ * @names: passed to get_children_props()
+ * @types: returned from get_children_props()
+ * @power_domains:
*
* This routine will return true only if the device node is
* a hotpluggable slot. This routine will return false
/**
* rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem.
- * @dn device node of slot
+ * @dn: device node of slot
*
* This subroutine will register a hotplugable slot with the
* PCI hotplug infrastructure. This routine is typicaly called
* routine will just return without doing anything, since embedded
* slots cannot be hotplugged.
*
- * To remove a slot, it suffices to call rpaphp_deregister_slot()
+ * To remove a slot, it suffices to call rpaphp_deregister_slot().
*/
int rpaphp_add_slot(struct device_node *dn)
{
/**
* rpaphp_enable_slot - record slot state, config pci device
+ * @slot: target &slot
*
* Initialize values in the slot, and the hotplug_slot info
* structures to indicate if there is a pci card plugged into
/**
* board_added - Called after a board has been added to the system.
+ * @p_slot: target &slot
*
- * Turns power on for the board
- * Configures board
- *
+ * Turns power on for the board.
+ * Configures board.
*/
static int board_added(struct slot *p_slot)
{
/**
- * remove_board - Turns off slot and LED's
- *
+ * remove_board - Turns off slot and LEDs
+ * @p_slot: target &slot
*/
static int remove_board(struct slot *p_slot)
{
};
/**
- * shpchp_pushbutton_thread
+ * shpchp_pushbutton_thread - handle pushbutton events
+ * @work: &struct work_struct to be handled
*
- * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
* Handles all pending events and exits.
- *
*/
static void shpchp_pushbutton_thread(struct work_struct *work)
{
sysfs_initialized = 1;
for_each_pci_dev(pdev) {
retval = pci_create_sysfs_dev_files(pdev);
- if (retval)
+ if (retval) {
+ pci_dev_put(pdev);
return retval;
+ }
}
return 0;
/**
* find_source_device - search through device hierarchy for source device
- * @p_dev: pointer to Root Port pci_dev data structure
+ * @parent: pointer to Root Port pci_dev data structure
* @id: device ID of agent who sends an error message to this Root Port
*
* Invoked when error is detected at the Root Port.
- **/
+ */
static struct device* find_source_device(struct pci_dev *parent, u16 id)
{
struct pci_dev *dev = parent;
/**
* broadcast_error_message - handle message broadcast to downstream drivers
- * @device: pointer to from where in a hierarchy message is broadcasted down
- * @api: callback to be broadcasted
+ * @dev: pointer to from where in a hierarchy message is broadcasted down
* @state: error state
+ * @error_mesg: message to print
+ * @cb: callback to be broadcasted
*
* Invoked during error recovery process. Once being invoked, the content
* of error severity will be broadcasted to all downstream drivers in a
* hierarchy in question.
- **/
+ */
static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
enum pci_channel_state state,
char *error_mesg,
* Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
* error detected message to all downstream drivers within a hierarchy in
* question and return the returned code.
- **/
+ */
static pci_ers_result_t do_recovery(struct pcie_device *aerdev,
struct pci_dev *dev,
int severity)
* @info: comprehensive error information
*
* Invoked when an error being detected by Root Port.
- **/
+ */
static void handle_error_source(struct pcie_device * aerdev,
struct pci_dev *dev,
struct aer_err_info info)
* @rpc: pointer to a Root Port data structure
*
* Invoked when PCIE bus loads AER service driver.
- **/
+ */
void aer_enable_rootport(struct aer_rpc *rpc)
{
struct pci_dev *pdev = rpc->rpd->port;
* @rpc: pointer to a Root Port data structure
*
* Invoked when PCIE bus unloads AER service driver.
- **/
+ */
static void disable_root_aer(struct aer_rpc *rpc)
{
struct pci_dev *pdev = rpc->rpd->port;
* @rpc: pointer to the root port which holds an error
*
* Invoked by DPC handler to consume an error.
- **/
+ */
static struct aer_err_source* get_e_source(struct aer_rpc *rpc)
{
struct aer_err_source *e_source;
* aer_isr_one_error - consume an error detected by root port
* @p_device: pointer to error root port service device
* @e_src: pointer to an error source
- **/
+ */
static void aer_isr_one_error(struct pcie_device *p_device,
struct aer_err_source *e_src)
{
* @work: definition of this work item
*
* Invoked, as DPC, when root port records new detected error
- **/
+ */
void aer_isr(struct work_struct *work)
{
struct aer_rpc *rpc = container_of(work, struct aer_rpc, dpc_handler);
* @rpc: pointer to a root port device being deleted
*
* Invoked when AER service unloaded on a specific Root Port
- **/
+ */
void aer_delete_rootport(struct aer_rpc *rpc)
{
/* Disable root port AER itself */
* @dev: pointer to AER pcie device
*
* Invoked when AER service driver is loaded.
- **/
+ */
int aer_init(struct pcie_device *dev)
{
if (aer_osc_setup(dev) && !forceload)
static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
{
- pci_ers_result_t status;
+ pci_ers_result_t status = PCI_ERS_RESULT_NONE;
int retval;
/* If fatal, restore cfg space for possible link reset at upstream */
*/
if (class == PCI_CLASS_STORAGE_IDE) {
u8 progif;
- struct pci_bus_region region;
-
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 1) == 0) {
- struct resource resource = {
- .start = 0x1F0,
- .end = 0x1F7,
- .flags = LEGACY_IO_RESOURCE,
- };
-
- pcibios_resource_to_bus(dev, ®ion, &resource);
- dev->resource[0].start = region.start;
- dev->resource[0].end = region.end;
- dev->resource[0].flags = resource.flags;
- resource.start = 0x3F6;
- resource.end = 0x3F6;
- resource.flags = LEGACY_IO_RESOURCE;
- pcibios_resource_to_bus(dev, ®ion, &resource);
- dev->resource[1].start = region.start;
- dev->resource[1].end = region.end;
- dev->resource[1].flags = resource.flags;
+ dev->resource[0].start = 0x1F0;
+ dev->resource[0].end = 0x1F7;
+ dev->resource[0].flags = LEGACY_IO_RESOURCE;
+ dev->resource[1].start = 0x3F6;
+ dev->resource[1].end = 0x3F6;
+ dev->resource[1].flags = LEGACY_IO_RESOURCE;
}
if ((progif & 4) == 0) {
- struct resource resource = {
- .start = 0x170,
- .end = 0x177,
- .flags = LEGACY_IO_RESOURCE,
- };
-
- pcibios_resource_to_bus(dev, ®ion, &resource);
- dev->resource[2].start = region.start;
- dev->resource[2].end = region.end;
- dev->resource[2].flags = resource.flags;
- resource.start = 0x376;
- resource.end = 0x376;
- resource.flags = LEGACY_IO_RESOURCE;
- pcibios_resource_to_bus(dev, ®ion, &resource);
- dev->resource[3].start = region.start;
- dev->resource[3].end = region.end;
- dev->resource[3].flags = resource.flags;
+ dev->resource[2].start = 0x170;
+ dev->resource[2].end = 0x177;
+ dev->resource[2].flags = LEGACY_IO_RESOURCE;
+ dev->resource[3].start = 0x376;
+ dev->resource[3].end = 0x376;
+ dev->resource[3].flags = LEGACY_IO_RESOURCE;
}
}
break;
EXPORT_SYMBOL(pcmcia_socket_list_rwsem);
-/**
+/*
* Low-level PCMCIA socket drivers need to register with the PCCard
* core using pcmcia_register_socket.
*
/**
* pcmcia_register_socket - add a new pcmcia socket device
+ * @socket: the &socket to register
*/
int pcmcia_register_socket(struct pcmcia_socket *socket)
{
/**
* pcmcia_unregister_socket - remove a pcmcia socket device
+ * @socket: the &socket to unregister
*/
void pcmcia_unregister_socket(struct pcmcia_socket *socket)
{
}
EXPORT_SYMBOL(pcmcia_get_socket_by_nr);
-/**
+/*
* The central event handler. Send_event() sends an event to the
* 16-bit subsystem, which then calls the relevant device drivers.
* Parse_events() interprets the event bits from
return CS_GENERAL_FAILURE;
}
-/**
+/*
* socket_setup() and socket_shutdown() are called by the main event handler
* when card insertion and removal events are received.
* socket_setup() turns on socket power and resets the socket, in two stages.
/**
* pcmcia_register_driver - register a PCMCIA driver with the bus core
+ * @driver: the &driver being registered
*
* Registers a PCMCIA driver with the PCMCIA bus core.
*/
/**
* pcmcia_unregister_driver - unregister a PCMCIA driver with the bus core
+ * @driver: the &driver being unregistered
*/
void pcmcia_unregister_driver(struct pcmcia_driver *driver)
{
/**
* pcmcia_load_firmware - load CIS from userspace if device-provided is broken
- * @dev - the pcmcia device which needs a CIS override
- * @filename - requested filename in /lib/firmware/
+ * @dev: the pcmcia device which needs a CIS override
+ * @filename: requested filename in /lib/firmware/
*
* This uses the in-kernel firmware loading mechanism to use a "fake CIS" if
* the one provided by the card is broken. The firmware files reside in
*/
#ifdef CONFIG_YENTA_ENE_TUNE
-/**
+/*
* set/clear various test bits:
* Defaults to clear the bit.
* - mask (u8) defines what bits to change
#define to_cycles(ns) ((ns)/120)
#define to_ns(cycles) ((cycles)*120)
-/**
+/*
* yenta PCI irq probing.
* currently only used in the TI/EnE initialization code
*/
}
-/**
+/*
* yenta PCI irq probing.
* currently only used in the TI/EnE initialization code
*/
* invisible during PCI scans because of a misconfigured subordinate number
* of the parent brige - some BIOSes seem to be too lazy to set it right.
* Does the fixup carefully by checking how far it can go without conflicts.
- * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
+ * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
*/
static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
{
{
int i = 0;
int irq;
+ int p, t;
if (!valid_IRQ(gsi))
return;
while (!(res->irq_resource[i].flags & IORESOURCE_UNSET) &&
i < PNP_MAX_IRQ)
i++;
- if (i >= PNP_MAX_IRQ)
+ if (i >= PNP_MAX_IRQ) {
+ printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ "
+ "resources: %d \n", PNP_MAX_IRQ);
return;
-
-#ifdef CONFIG_X86
- if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE ||
- polarity != ACPI_ACTIVE_HIGH)) {
- pnp_warn("BIOS BUG: legacy PNP IRQ %d should be edge trigger, "
- "active high", gsi);
- triggering = ACPI_EDGE_SENSITIVE;
- polarity = ACPI_ACTIVE_HIGH;
}
-#endif
+ /*
+ * in IO-APIC mode, use overrided attribute. Two reasons:
+ * 1. BIOS bug in DSDT
+ * 2. BIOS uses IO-APIC mode Interrupt Source Override
+ */
+ if (!acpi_get_override_irq(gsi, &t, &p)) {
+ t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+ p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+ if (triggering != t || polarity != p) {
+ pnp_warn("IRQ %d override to %s, %s",
+ gsi, t ? "edge":"level", p ? "low":"high");
+ triggering = t;
+ polarity = p;
+ }
+ }
res->irq_resource[i].flags = IORESOURCE_IRQ; // Also clears _UNSET flag
res->irq_resource[i].flags |= irq_flags(triggering, polarity);
}
res->dma_resource[i].start = dma;
res->dma_resource[i].end = dma;
+ } else {
+ printk(KERN_ERR "pnpacpi: exceeded the max number of DMA "
+ "resources: %d \n", PNP_MAX_DMA);
}
}
}
res->port_resource[i].start = io;
res->port_resource[i].end = io + len - 1;
+ } else {
+ printk(KERN_ERR "pnpacpi: exceeded the max number of IO "
+ "resources: %d \n", PNP_MAX_PORT);
}
}
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
+ } else {
+ printk(KERN_ERR "pnpacpi: exceeded the max number of mem "
+ "resources: %d\n", PNP_MAX_MEM);
}
}
{
struct pci_dev *pci = NULL;
for_each_pci_dev(pci) {
- if (pci->irq == *irq)
+ if (pci->irq == *irq) {
+ pci_dev_put(pci);
return 0;
+ }
}
}
#endif
-obj-$(CONFIG_PS3_VUART) += vuart.o
+obj-$(CONFIG_PS3_VUART) += ps3-vuart.o
obj-$(CONFIG_PS3_PS3AV) += ps3av_mod.o
ps3av_mod-objs += ps3av.o ps3av_cmd.o
obj-$(CONFIG_PPC_PS3) += sys-manager-core.o
-obj-$(CONFIG_PS3_SYS_MANAGER) += sys-manager.o
+obj-$(CONFIG_PS3_SYS_MANAGER) += ps3-sys-manager.o
obj-$(CONFIG_PS3_STORAGE) += ps3stor_lib.o
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
- depends on BFIN
+ depends on BLACKFIN
help
If you say yes here you will get support for the
Blackfin On-Chip Real Time Clock.
return -EINVAL;
/* Cannot register while the char dev is in use */
- if (!(mutex_trylock(&rtc->char_lock)))
+ if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
return -EBUSY;
spin_lock_irq(&rtc->irq_task_lock);
}
spin_unlock_irq(&rtc->irq_task_lock);
- mutex_unlock(&rtc->char_lock);
+ clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
return retval;
}
struct rtc_device, char_dev);
const struct rtc_class_ops *ops = rtc->ops;
- /* We keep the lock as long as the device is in use
- * and return immediately if busy
- */
- if (!(mutex_trylock(&rtc->char_lock)))
+ if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
return -EBUSY;
file->private_data = rtc;
return 0;
}
- /* something has gone wrong, release the lock */
- mutex_unlock(&rtc->char_lock);
+ /* something has gone wrong */
+ clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
return err;
}
if (rtc->ops->release)
rtc->ops->release(rtc->dev.parent);
- mutex_unlock(&rtc->char_lock);
+ clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
return 0;
}
rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id);
- mutex_init(&rtc->char_lock);
#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
INIT_WORK(&rtc->uie_task, rtc_uie_task);
setup_timer(&rtc->uie_timer, rtc_uie_timer, (unsigned long)rtc);
/* do the i/o */
status = spi_sync(spi, &message);
- if (status == 0)
- status = message.status;
- else
- return status;
-
- *data = chip->rx_buf[1];
+ if (status == 0)
+ *data = chip->rx_buf[1];
return status;
}
/* do the i/o */
status = spi_sync(spi, &message);
- if (status == 0)
- status = message.status;
- else
+ if (status)
return status;
/* The chip sends data in this order:
if (rc)
goto unregister_dev;
- add_disk(dev_info->gd);
-
blk_queue_make_request(dev_info->dcssblk_queue, dcssblk_make_request);
blk_queue_hardsect_size(dev_info->dcssblk_queue, 4096);
+ add_disk(dev_info->gd);
+
switch (dev_info->segment_type) {
case SEG_TYPE_SR:
case SEG_TYPE_ER:
break;
case -ENXIO:
case -ENOMEM:
+ case -EIO:
/* These should abort looping */
break;
default:
void css_schedule_reprobe(void)
{
need_reprobe = 1;
- queue_work(ccw_device_work, &css_reprobe_work);
+ queue_work(slow_path_wq, &css_reprobe_work);
}
EXPORT_SYMBOL_GPL(css_schedule_reprobe);
if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
PREPARE_WORK(&cdev->private->kick_work,
ccw_device_move_to_orphanage);
- queue_work(ccw_device_work, &cdev->private->kick_work);
+ queue_work(slow_path_wq, &cdev->private->kick_work);
} else
ccw_device_start_id(cdev, 0);
}
sch = to_subchannel(cdev->dev.parent);
/* Setup sense channel program. */
ccw = cdev->private->iccws;
- if (sch->schib.pmcw.pim != 0x80) {
- /* more than one path installed. */
- ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
- ccw->cda = 0;
- ccw->count = 0;
- ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
- ccw++;
- }
ccw->cmd_code = CCW_CMD_SENSE_ID;
ccw->cda = (__u32) __pa (&cdev->private->senseid);
ccw->count = sizeof (struct senseid);
skb->dev = pskb->dev;
skb->protocol = pskb->protocol;
pskb->ip_summed = CHECKSUM_UNNECESSARY;
- netif_rx_ni(skb);
/**
- * Successful rx; reset logflags
+ * reset logflags
*/
ch->logflags = 0;
- dev->last_rx = jiffies;
privptr->stats.rx_packets++;
privptr->stats.rx_bytes += skb->len;
+ netif_rx_ni(skb);
+ dev->last_rx = jiffies;
if (len > 0) {
skb_pull(pskb, header->length);
if (skb_tailroom(pskb) < LL_HEADER_LENGTH) {
}
/**
- * Initialize everything of the net device except the name and the
- * channel structs.
+ * Device setup function called by alloc_netdev().
+ *
+ * @param dev Device to be setup.
*/
-static struct net_device *
-ctc_init_netdevice(struct net_device * dev, int alloc_device,
- struct ctc_priv *privptr)
+void ctc_init_netdevice(struct net_device * dev)
{
- if (!privptr)
- return NULL;
-
DBF_TEXT(setup, 3, __FUNCTION__);
- if (alloc_device) {
- dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
- if (!dev)
- return NULL;
- }
-
- dev->priv = privptr;
- privptr->fsm = init_fsm("ctcdev", dev_state_names,
- dev_event_names, CTC_NR_DEV_STATES, CTC_NR_DEV_EVENTS,
- dev_fsm, DEV_FSM_LEN, GFP_KERNEL);
- if (privptr->fsm == NULL) {
- if (alloc_device)
- kfree(dev);
- return NULL;
- }
- fsm_newstate(privptr->fsm, DEV_STATE_STOPPED);
- fsm_settimer(privptr->fsm, &privptr->restart_timer);
if (dev->mtu == 0)
dev->mtu = CTC_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2;
dev->hard_start_xmit = ctc_tx;
dev->type = ARPHRD_SLIP;
dev->tx_queue_len = 100;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
- return dev;
}
"ccw_device_set_online (cdev[1]) failed with ret = %d\n", ret);
}
- dev = ctc_init_netdevice(NULL, 1, privptr);
-
+ dev = alloc_netdev(0, "ctc%d", ctc_init_netdevice);
if (!dev) {
ctc_pr_warn("ctc_init_netdevice failed\n");
goto out;
}
+ dev->priv = privptr;
- strlcpy(dev->name, "ctc%d", IFNAMSIZ);
+ privptr->fsm = init_fsm("ctcdev", dev_state_names,
+ dev_event_names, CTC_NR_DEV_STATES, CTC_NR_DEV_EVENTS,
+ dev_fsm, DEV_FSM_LEN, GFP_KERNEL);
+ if (privptr->fsm == NULL) {
+ free_netdev(dev);
+ goto out;
+ }
+ fsm_newstate(privptr->fsm, DEV_STATE_STOPPED);
+ fsm_settimer(privptr->fsm, &privptr->restart_timer);
for (direction = READ; direction <= WRITE; direction++) {
privptr->channel[direction] =
skb->dev = pskb->dev;
skb->protocol = pskb->protocol;
pskb->ip_summed = CHECKSUM_UNNECESSARY;
+ privptr->stats.rx_packets++;
+ privptr->stats.rx_bytes += skb->len;
/*
* Since receiving is always initiated from a tasklet (in iucv.c),
* we must use netif_rx_ni() instead of netif_rx()
*/
netif_rx_ni(skb);
dev->last_rx = jiffies;
- privptr->stats.rx_packets++;
- privptr->stats.rx_bytes += skb->len;
skb_pull(pskb, header->next);
skb_put(pskb, NETIUCV_HDRLEN);
}
debug_text_event(adapter->erp_dbf, 2, "a_adis");
debug_event(adapter->erp_dbf, 2, &erp_action->action, sizeof (int));
- zfcp_erp_async_handler_nolock(erp_action, ZFCP_STATUS_ERP_DISMISSED);
+ erp_action->status |= ZFCP_STATUS_ERP_DISMISSED;
+ if (zfcp_erp_action_exists(erp_action) == ZFCP_ERP_ACTION_RUNNING)
+ zfcp_erp_action_ready(erp_action);
}
int
&adapter->status)) {
write_lock_irqsave(&adapter->erp_lock, flags);
- next = adapter->erp_ready_head.prev;
+ next = adapter->erp_ready_head.next;
write_unlock_irqrestore(&adapter->erp_lock, flags);
if (next != &adapter->erp_ready_head) {
/*
* check for dismissed status again to avoid follow-up actions,
- * failing of targets and so on for dismissed actions
+ * failing of targets and so on for dismissed actions,
+ * we go through down() here because there has been an up()
*/
- retval = zfcp_erp_strategy_check_action(erp_action, retval);
+ if (erp_action->status & ZFCP_STATUS_ERP_DISMISSED)
+ retval = ZFCP_ERP_CONTINUES;
switch (retval) {
- case ZFCP_ERP_DISMISSED:
- /* leave since this action has ridden to its ancestors */
- debug_text_event(adapter->erp_dbf, 6, "a_st_dis2");
- goto unlock;
case ZFCP_ERP_NOMEM:
/* no memory to continue immediately, let it sleep */
if (!(erp_action->status & ZFCP_STATUS_ERP_LOWMEM)) {
++adapter->erp_total_count;
/* finally put it into 'ready' queue and kick erp thread */
- list_add(&erp_action->list, &adapter->erp_ready_head);
+ list_add_tail(&erp_action->list, &adapter->erp_ready_head);
up(&adapter->erp_ready_sem);
retval = 0;
out:
aif = (struct aac_aifcmd *)hw_fib->data;
aif->command = cpu_to_le32(AifCmdEventNotify);
aif->seqnum = cpu_to_le32(0xFFFFFFFF);
- aif->data[0] = cpu_to_le32(AifEnExpEvent);
- aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
- aif->data[2] = cpu_to_le32(AifHighPriority);
- aif->data[3] = cpu_to_le32(BlinkLED);
+ aif->data[0] = AifEnExpEvent;
+ aif->data[1] = AifExeFirmwarePanic;
+ aif->data[2] = AifHighPriority;
+ aif->data[3] = BlinkLED;
/*
* Put the FIB onto the
static int aac_cfg_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_RAWIO))
return -EPERM;
return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
}
static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_RAWIO))
return -EPERM;
return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg);
}
static void __aac_shutdown(struct aac_dev * aac)
{
- kthread_stop(aac->thread);
+ if (aac->aif_thread)
+ kthread_stop(aac->thread);
aac_send_shutdown(aac);
aac_adapter_disable_int(aac);
free_irq(aac->pdev->irq, aac);
#endif /* REAL_DMA */
- NCR5380_intr(0, 0);
+ NCR5380_intr(irq, dummy);
#if 0
/* To be sure the int is not masked */
#endif /* REAL_DMA */
- NCR5380_intr(0, 0);
+ NCR5380_intr(irq, dummy);
return IRQ_HANDLED;
}
* interrupt after having cleared the pending flag for the DMA
* interrupt. */
if (request_irq(IRQ_TT_MFP_SCSI, scsi_tt_intr, IRQ_TYPE_SLOW,
- "SCSI NCR5380", scsi_tt_intr)) {
+ "SCSI NCR5380", instance)) {
printk(KERN_ERR "atari_scsi_detect: cannot allocate irq %d, aborting",IRQ_TT_MFP_SCSI);
scsi_unregister(atari_scsi_host);
atari_stram_free(atari_dma_buffer);
IRQ_TYPE_PRIO, "Hades DMA emulator",
hades_dma_emulator)) {
printk(KERN_ERR "atari_scsi_detect: cannot allocate irq %d, aborting (MACH_IS_HADES)",IRQ_AUTO_2);
- free_irq(IRQ_TT_MFP_SCSI, scsi_tt_intr);
+ free_irq(IRQ_TT_MFP_SCSI, instance);
scsi_unregister(atari_scsi_host);
atari_stram_free(atari_dma_buffer);
atari_dma_buffer = 0;
int atari_scsi_release(struct Scsi_Host *sh)
{
if (IS_A_TT())
- free_irq(IRQ_TT_MFP_SCSI, scsi_tt_intr);
+ free_irq(IRQ_TT_MFP_SCSI, sh);
if (atari_dma_buffer)
atari_stram_free(atari_dma_buffer);
return 1;
};
MODULE_DEVICE_TABLE(pci,dptids);
-static void adpt_exit(void);
-
-static int adpt_detect(void)
+static int adpt_detect(struct scsi_host_template* sht)
{
struct pci_dev *pDev = NULL;
adpt_hba* pHba;
+ adpt_init();
+
PINFO("Detecting Adaptec I2O RAID controllers...\n");
/* search for all Adatpec I2O RAID cards */
while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
if(pDev->device == PCI_DPT_DEVICE_ID ||
pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){
- if(adpt_install_hba(pDev) ){
+ if(adpt_install_hba(sht, pDev) ){
PERROR("Could not Init an I2O RAID device\n");
PERROR("Will not try to detect others.\n");
return hba_count-1;
}
for (pHba = hba_chain; pHba; pHba = pHba->next) {
- if (adpt_scsi_register(pHba) < 0) {
+ if( adpt_scsi_register(pHba,sht) < 0){
adpt_i2o_delete_hba(pHba);
continue;
}
pHba->initialized = TRUE;
pHba->state &= ~DPTI_STATE_RESET;
- scsi_scan_host(pHba->host);
}
// Register our control device node
// nodes will need to be created in /dev to access this
// the nodes can not be created from within the driver
if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) {
- adpt_exit();
+ adpt_i2o_sys_shutdown();
return 0;
}
return hba_count;
}
-static int adpt_release(adpt_hba *pHba)
+/*
+ * scsi_unregister will be called AFTER we return.
+ */
+static int adpt_release(struct Scsi_Host *host)
{
- struct Scsi_Host *shost = pHba->host;
- scsi_remove_host(shost);
+ adpt_hba* pHba = (adpt_hba*) host->hostdata[0];
// adpt_i2o_quiesce_hba(pHba);
adpt_i2o_delete_hba(pHba);
- scsi_host_put(shost);
+ scsi_unregister(host);
return 0;
}
#endif
-static int adpt_install_hba(struct pci_dev* pDev)
+static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
{
adpt_hba* pHba = NULL;
mutex_lock(&adpt_configuration_lock);
+ // scsi_unregister calls our adpt_release which
+ // does a quiese
if(pHba->host){
free_irq(pHba->host->irq, pHba);
}
}
+static int adpt_init(void)
+{
+ printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+#ifdef REBOOT_NOTIFIER
+ register_reboot_notifier(&adpt_reboot_notifier);
+#endif
+
+ return 0;
+}
+
+
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
{
struct adpt_device* d;
}
+static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
+{
+ struct Scsi_Host *host = NULL;
+
+ host = scsi_register(sht, sizeof(adpt_hba*));
+ if (host == NULL) {
+ printk ("%s: scsi_register returned NULL\n",pHba->name);
+ return -1;
+ }
+ host->hostdata[0] = (unsigned long)pHba;
+ pHba->host = host;
+
+ host->irq = pHba->pDev->irq;
+ /* no IO ports, so don't have to set host->io_port and
+ * host->n_io_port
+ */
+ host->io_port = 0;
+ host->n_io_port = 0;
+ /* see comments in scsi_host.h */
+ host->max_id = 16;
+ host->max_lun = 256;
+ host->max_channel = pHba->top_scsi_channel + 1;
+ host->cmd_per_lun = 1;
+ host->unique_id = (uint) pHba;
+ host->sg_tablesize = pHba->sg_tablesize;
+ host->can_queue = pHba->post_fifo_size;
+
+ return 0;
+}
+
+
static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
{
adpt_hba* pHba;
#endif
-static struct scsi_host_template adpt_template = {
+static struct scsi_host_template driver_template = {
.name = "dpt_i2o",
.proc_name = "dpt_i2o",
.proc_info = adpt_proc_info,
+ .detect = adpt_detect,
+ .release = adpt_release,
.info = adpt_info,
.queuecommand = adpt_queue,
.eh_abort_handler = adpt_abort,
.use_clustering = ENABLE_CLUSTERING,
.use_sg_chaining = ENABLE_SG_CHAINING,
};
-
-static s32 adpt_scsi_register(adpt_hba* pHba)
-{
- struct Scsi_Host *host;
-
- host = scsi_host_alloc(&adpt_template, sizeof(adpt_hba*));
- if (host == NULL) {
- printk ("%s: scsi_host_alloc returned NULL\n",pHba->name);
- return -1;
- }
- host->hostdata[0] = (unsigned long)pHba;
- pHba->host = host;
-
- host->irq = pHba->pDev->irq;
- /* no IO ports, so don't have to set host->io_port and
- * host->n_io_port
- */
- host->io_port = 0;
- host->n_io_port = 0;
- /* see comments in scsi_host.h */
- host->max_id = 16;
- host->max_lun = 256;
- host->max_channel = pHba->top_scsi_channel + 1;
- host->cmd_per_lun = 1;
- host->unique_id = (uint) pHba;
- host->sg_tablesize = pHba->sg_tablesize;
- host->can_queue = pHba->post_fifo_size;
-
- if (scsi_add_host(host, &pHba->pDev->dev)) {
- scsi_host_put(host);
- return -1;
- }
-
- return 0;
-}
-
-static int __init adpt_init(void)
-{
- int count;
-
- printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
-#ifdef REBOOT_NOTIFIER
- register_reboot_notifier(&adpt_reboot_notifier);
-#endif
-
- count = adpt_detect();
-
- return count > 0 ? 0 : -ENODEV;
-}
-
-static void adpt_exit(void)
-{
- while (hba_chain)
- adpt_release(hba_chain);
-}
-
-module_init(adpt_init);
-module_exit(adpt_exit);
+#include "scsi_module.c"
MODULE_LICENSE("GPL");
* SCSI interface function Prototypes
*/
+static int adpt_detect(struct scsi_host_template * sht);
static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *));
static int adpt_abort(struct scsi_cmnd * cmd);
static int adpt_reset(struct scsi_cmnd* cmd);
+static int adpt_release(struct Scsi_Host *host);
static int adpt_slave_configure(struct scsi_device *);
static const char *adpt_info(struct Scsi_Host *pSHost);
#define DPT_DRIVER_NAME "Adaptec I2O RAID"
+#ifndef HOSTS_C
+
#include "dpt/sys_info.h"
#include <linux/wait.h>
#include "dpt/dpti_i2o.h"
static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
-static s32 adpt_scsi_register(adpt_hba* pHba);
+static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
static s32 adpt_hba_reset(adpt_hba* pHba);
static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
static s32 adpt_rescan(adpt_hba* pHba);
static void adpt_inquiry(adpt_hba* pHba);
static void adpt_fail_posted_scbs(adpt_hba* pHba);
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun);
-static int adpt_install_hba(struct pci_dev* pDev) ;
+static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ;
static int adpt_i2o_online_hba(adpt_hba* pHba);
static void adpt_i2o_post_wait_complete(u32, int);
static int adpt_i2o_systab_send(adpt_hba* pHba);
#define FW_DEBUG_BLED_OFFSET 8
#define FW_DEBUG_FLAGS_NO_HEADERS_B 0x01
+#endif /* !HOSTS_C */
#endif /* _DPT_H */
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I finger it out. */
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, dtc_intr, IRQF_DISABLED, "dtc", instance)) {
+ if (request_irq(instance->irq, dtc_intr, IRQF_DISABLED,
+ "dtc", instance)) {
printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
}
NCR5380_local_declare();
NCR5380_setup(shost);
if (shost->irq)
- free_irq(shost->irq, NULL);
+ free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
tp->flags |= ESP_TGT_CHECK_NEGO;
if (tp->starget)
- starget_for_each_device(tp->starget, NULL,
- esp_clear_hold);
+ __starget_for_each_device(tp->starget, NULL,
+ esp_clear_hold);
}
esp->flags &= ~ESP_FLAG_RESETTING;
}
instance->irq = NCR5380_probe_irq(instance, 0xffff);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, generic_NCR5380_intr, IRQF_DISABLED, "NCR5380", instance)) {
+ if (request_irq(instance->irq, generic_NCR5380_intr,
+ IRQF_DISABLED, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
}
NCR5380_setup(instance);
if (instance->irq != SCSI_IRQ_NONE)
- free_irq(instance->irq, NULL);
+ free_irq(instance->irq, instance);
NCR5380_exit(instance);
#ifndef CONFIG_SCSI_G_NCR5380_MEM
}
}
-static void hexdump(u8 *x, int len)
-{
- int i;
-
- printk("[ ");
- for (i = 0; i < len; i++)
- printk("%x ", x[i]);
- printk("]\n");
-}
-
static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
- hexdump(pc->c, 6);
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c,
+ 6, 0);
}
rq->rq_disk = scsi->disk;
return ide_do_drive_cmd(drive, rq, ide_preempt);
idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
- hexdump(pc->buffer,16);
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
+ pc->buffer, 16, 0);
}
memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
kfree(pc->buffer);
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
- hexdump(cmd->cmnd, cmd->cmd_len);
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
+ cmd->cmnd, cmd->cmd_len, 0);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
- hexdump(pc->c, 12);
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
+ pc->c, 12, 0);
}
}
if (unlikely(!sc))
return;
- tcp_ctask->xmstate = XMSTATE_IDLE;
+ tcp_ctask->xmstate = XMSTATE_VALUE_IDLE;
tcp_ctask->r2t = NULL;
}
tcp_ctask->exp_datasn = r2tsn + 1;
__kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*));
- tcp_ctask->xmstate |= XMSTATE_SOL_HDR_INIT;
+ set_bit(XMSTATE_BIT_SOL_HDR_INIT, &tcp_ctask->xmstate);
list_move_tail(&ctask->running, &conn->xmitqueue);
scsi_queue_work(session->host, &conn->xmitwork);
tcp_ctask->pad_count = ISCSI_PAD_LEN - tcp_ctask->pad_count;
debug_scsi("write padding %d bytes\n", tcp_ctask->pad_count);
- tcp_ctask->xmstate |= XMSTATE_W_PAD;
+ set_bit(XMSTATE_BIT_W_PAD, &tcp_ctask->xmstate);
}
/**
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
BUG_ON(__kfifo_len(tcp_ctask->r2tqueue));
- tcp_ctask->xmstate = XMSTATE_CMD_HDR_INIT;
+ tcp_ctask->xmstate = 1 << XMSTATE_BIT_CMD_HDR_INIT;
}
/**
* xmit.
*
* Management xmit state machine consists of these states:
- * XMSTATE_IMM_HDR_INIT - calculate digest of PDU Header
- * XMSTATE_IMM_HDR - PDU Header xmit in progress
- * XMSTATE_IMM_DATA - PDU Data xmit in progress
- * XMSTATE_IDLE - management PDU is done
+ * XMSTATE_BIT_IMM_HDR_INIT - calculate digest of PDU Header
+ * XMSTATE_BIT_IMM_HDR - PDU Header xmit in progress
+ * XMSTATE_BIT_IMM_DATA - PDU Data xmit in progress
+ * XMSTATE_VALUE_IDLE - management PDU is done
**/
static int
iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask)
debug_scsi("mtask deq [cid %d state %x itt 0x%x]\n",
conn->id, tcp_mtask->xmstate, mtask->itt);
- if (tcp_mtask->xmstate & XMSTATE_IMM_HDR_INIT) {
+ if (test_bit(XMSTATE_BIT_IMM_HDR_INIT, &tcp_mtask->xmstate)) {
iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr,
sizeof(struct iscsi_hdr));
if (mtask->data_count) {
- tcp_mtask->xmstate |= XMSTATE_IMM_DATA;
+ set_bit(XMSTATE_BIT_IMM_DATA, &tcp_mtask->xmstate);
iscsi_buf_init_iov(&tcp_mtask->sendbuf,
(char*)mtask->data,
mtask->data_count);
(u8*)tcp_mtask->hdrext);
tcp_mtask->sent = 0;
- tcp_mtask->xmstate &= ~XMSTATE_IMM_HDR_INIT;
- tcp_mtask->xmstate |= XMSTATE_IMM_HDR;
+ clear_bit(XMSTATE_BIT_IMM_HDR_INIT, &tcp_mtask->xmstate);
+ set_bit(XMSTATE_BIT_IMM_HDR, &tcp_mtask->xmstate);
}
- if (tcp_mtask->xmstate & XMSTATE_IMM_HDR) {
+ if (test_bit(XMSTATE_BIT_IMM_HDR, &tcp_mtask->xmstate)) {
rc = iscsi_sendhdr(conn, &tcp_mtask->headbuf,
mtask->data_count);
if (rc)
return rc;
- tcp_mtask->xmstate &= ~XMSTATE_IMM_HDR;
+ clear_bit(XMSTATE_BIT_IMM_HDR, &tcp_mtask->xmstate);
}
- if (tcp_mtask->xmstate & XMSTATE_IMM_DATA) {
+ if (test_and_clear_bit(XMSTATE_BIT_IMM_DATA, &tcp_mtask->xmstate)) {
BUG_ON(!mtask->data_count);
- tcp_mtask->xmstate &= ~XMSTATE_IMM_DATA;
/* FIXME: implement.
* Virtual buffer could be spreaded across multiple pages...
*/
rc = iscsi_sendpage(conn, &tcp_mtask->sendbuf,
&mtask->data_count, &tcp_mtask->sent);
if (rc) {
- tcp_mtask->xmstate |= XMSTATE_IMM_DATA;
+ set_bit(XMSTATE_BIT_IMM_DATA, &tcp_mtask->xmstate);
return rc;
}
} while (mtask->data_count);
}
- BUG_ON(tcp_mtask->xmstate != XMSTATE_IDLE);
+ BUG_ON(tcp_mtask->xmstate != XMSTATE_VALUE_IDLE);
if (mtask->hdr->itt == RESERVED_ITT) {
struct iscsi_session *session = conn->session;
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
int rc = 0;
- if (tcp_ctask->xmstate & XMSTATE_CMD_HDR_INIT) {
+ if (test_bit(XMSTATE_BIT_CMD_HDR_INIT, &tcp_ctask->xmstate)) {
tcp_ctask->sent = 0;
tcp_ctask->sg_count = 0;
tcp_ctask->exp_datasn = 0;
if (conn->hdrdgst_en)
iscsi_hdr_digest(conn, &tcp_ctask->headbuf,
(u8*)tcp_ctask->hdrext);
- tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_INIT;
- tcp_ctask->xmstate |= XMSTATE_CMD_HDR_XMIT;
+ clear_bit(XMSTATE_BIT_CMD_HDR_INIT, &tcp_ctask->xmstate);
+ set_bit(XMSTATE_BIT_CMD_HDR_XMIT, &tcp_ctask->xmstate);
}
- if (tcp_ctask->xmstate & XMSTATE_CMD_HDR_XMIT) {
+ if (test_bit(XMSTATE_BIT_CMD_HDR_XMIT, &tcp_ctask->xmstate)) {
rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->imm_count);
if (rc)
return rc;
- tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_XMIT;
+ clear_bit(XMSTATE_BIT_CMD_HDR_XMIT, &tcp_ctask->xmstate);
if (sc->sc_data_direction != DMA_TO_DEVICE)
return 0;
if (ctask->imm_count) {
- tcp_ctask->xmstate |= XMSTATE_IMM_DATA;
+ set_bit(XMSTATE_BIT_IMM_DATA, &tcp_ctask->xmstate);
iscsi_set_padding(tcp_ctask, ctask->imm_count);
if (ctask->conn->datadgst_en) {
}
}
- if (ctask->unsol_count)
- tcp_ctask->xmstate |=
- XMSTATE_UNS_HDR | XMSTATE_UNS_INIT;
+ if (ctask->unsol_count) {
+ set_bit(XMSTATE_BIT_UNS_HDR, &tcp_ctask->xmstate);
+ set_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate);
+ }
}
return rc;
}
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
int sent = 0, rc;
- if (tcp_ctask->xmstate & XMSTATE_W_PAD) {
+ if (test_bit(XMSTATE_BIT_W_PAD, &tcp_ctask->xmstate)) {
iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad,
tcp_ctask->pad_count);
if (conn->datadgst_en)
crypto_hash_update(&tcp_conn->tx_hash,
&tcp_ctask->sendbuf.sg,
tcp_ctask->sendbuf.sg.length);
- } else if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_PAD))
+ } else if (!test_bit(XMSTATE_BIT_W_RESEND_PAD, &tcp_ctask->xmstate))
return 0;
- tcp_ctask->xmstate &= ~XMSTATE_W_PAD;
- tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_PAD;
+ clear_bit(XMSTATE_BIT_W_PAD, &tcp_ctask->xmstate);
+ clear_bit(XMSTATE_BIT_W_RESEND_PAD, &tcp_ctask->xmstate);
debug_scsi("sending %d pad bytes for itt 0x%x\n",
tcp_ctask->pad_count, ctask->itt);
rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count,
&sent);
if (rc) {
debug_scsi("padding send failed %d\n", rc);
- tcp_ctask->xmstate |= XMSTATE_W_RESEND_PAD;
+ set_bit(XMSTATE_BIT_W_RESEND_PAD, &tcp_ctask->xmstate);
}
return rc;
}
tcp_ctask = ctask->dd_data;
tcp_conn = conn->dd_data;
- if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_DATA_DIGEST)) {
+ if (!test_bit(XMSTATE_BIT_W_RESEND_DATA_DIGEST, &tcp_ctask->xmstate)) {
crypto_hash_final(&tcp_conn->tx_hash, (u8*)digest);
iscsi_buf_init_iov(buf, (char*)digest, 4);
}
- tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_DATA_DIGEST;
+ clear_bit(XMSTATE_BIT_W_RESEND_DATA_DIGEST, &tcp_ctask->xmstate);
rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent);
if (!rc)
else {
debug_scsi("sending digest 0x%x failed for itt 0x%x!\n",
*digest, ctask->itt);
- tcp_ctask->xmstate |= XMSTATE_W_RESEND_DATA_DIGEST;
+ set_bit(XMSTATE_BIT_W_RESEND_DATA_DIGEST, &tcp_ctask->xmstate);
}
return rc;
}
struct iscsi_data_task *dtask;
int rc;
- tcp_ctask->xmstate |= XMSTATE_UNS_DATA;
- if (tcp_ctask->xmstate & XMSTATE_UNS_INIT) {
+ set_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate);
+ if (test_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate)) {
dtask = &tcp_ctask->unsol_dtask;
iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr);
iscsi_hdr_digest(conn, &tcp_ctask->headbuf,
(u8*)dtask->hdrext);
- tcp_ctask->xmstate &= ~XMSTATE_UNS_INIT;
+ clear_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate);
iscsi_set_padding(tcp_ctask, ctask->data_count);
}
rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->data_count);
if (rc) {
- tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA;
- tcp_ctask->xmstate |= XMSTATE_UNS_HDR;
+ clear_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate);
+ set_bit(XMSTATE_BIT_UNS_HDR, &tcp_ctask->xmstate);
return rc;
}
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
int rc;
- if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) {
+ if (test_and_clear_bit(XMSTATE_BIT_UNS_HDR, &tcp_ctask->xmstate)) {
BUG_ON(!ctask->unsol_count);
- tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR;
send_hdr:
rc = iscsi_send_unsol_hdr(conn, ctask);
if (rc)
return rc;
}
- if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) {
+ if (test_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate)) {
struct iscsi_data_task *dtask = &tcp_ctask->unsol_dtask;
int start = tcp_ctask->sent;
ctask->unsol_count -= tcp_ctask->sent - start;
if (rc)
return rc;
- tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA;
+ clear_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate);
/*
* Done with the Data-Out. Next, check if we need
* to send another unsolicited Data-Out.
*/
if (ctask->unsol_count) {
debug_scsi("sending more uns\n");
- tcp_ctask->xmstate |= XMSTATE_UNS_INIT;
+ set_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate);
goto send_hdr;
}
}
struct iscsi_data_task *dtask;
int left, rc;
- if (tcp_ctask->xmstate & XMSTATE_SOL_HDR_INIT) {
+ if (test_bit(XMSTATE_BIT_SOL_HDR_INIT, &tcp_ctask->xmstate)) {
if (!tcp_ctask->r2t) {
spin_lock_bh(&session->lock);
__kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t,
if (conn->hdrdgst_en)
iscsi_hdr_digest(conn, &r2t->headbuf,
(u8*)dtask->hdrext);
- tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR_INIT;
- tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
+ clear_bit(XMSTATE_BIT_SOL_HDR_INIT, &tcp_ctask->xmstate);
+ set_bit(XMSTATE_BIT_SOL_HDR, &tcp_ctask->xmstate);
}
- if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) {
+ if (test_bit(XMSTATE_BIT_SOL_HDR, &tcp_ctask->xmstate)) {
r2t = tcp_ctask->r2t;
dtask = &r2t->dtask;
rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count);
if (rc)
return rc;
- tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
- tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
+ clear_bit(XMSTATE_BIT_SOL_HDR, &tcp_ctask->xmstate);
+ set_bit(XMSTATE_BIT_SOL_DATA, &tcp_ctask->xmstate);
if (conn->datadgst_en) {
iscsi_data_digest_init(conn->dd_data, tcp_ctask);
r2t->sent);
}
- if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) {
+ if (test_bit(XMSTATE_BIT_SOL_DATA, &tcp_ctask->xmstate)) {
r2t = tcp_ctask->r2t;
dtask = &r2t->dtask;
&dtask->digestbuf, &dtask->digest);
if (rc)
return rc;
- tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA;
+ clear_bit(XMSTATE_BIT_SOL_DATA, &tcp_ctask->xmstate);
/*
* Done with this Data-Out. Next, check if we have
* xmit stages.
*
*iscsi_send_cmd_hdr()
- * XMSTATE_CMD_HDR_INIT - prepare Header and Data buffers Calculate
- * Header Digest
- * XMSTATE_CMD_HDR_XMIT - Transmit header in progress
+ * XMSTATE_BIT_CMD_HDR_INIT - prepare Header and Data buffers Calculate
+ * Header Digest
+ * XMSTATE_BIT_CMD_HDR_XMIT - Transmit header in progress
*
*iscsi_send_padding
- * XMSTATE_W_PAD - Prepare and send pading
- * XMSTATE_W_RESEND_PAD - retry send pading
+ * XMSTATE_BIT_W_PAD - Prepare and send pading
+ * XMSTATE_BIT_W_RESEND_PAD - retry send pading
*
*iscsi_send_digest
- * XMSTATE_W_RESEND_DATA_DIGEST - Finalize and send Data Digest
- * XMSTATE_W_RESEND_DATA_DIGEST - retry sending digest
+ * XMSTATE_BIT_W_RESEND_DATA_DIGEST - Finalize and send Data Digest
+ * XMSTATE_BIT_W_RESEND_DATA_DIGEST - retry sending digest
*
*iscsi_send_unsol_hdr
- * XMSTATE_UNS_INIT - prepare un-solicit data header and digest
- * XMSTATE_UNS_HDR - send un-solicit header
+ * XMSTATE_BIT_UNS_INIT - prepare un-solicit data header and digest
+ * XMSTATE_BIT_UNS_HDR - send un-solicit header
*
*iscsi_send_unsol_pdu
- * XMSTATE_UNS_DATA - send un-solicit data in progress
+ * XMSTATE_BIT_UNS_DATA - send un-solicit data in progress
*
*iscsi_send_sol_pdu
- * XMSTATE_SOL_HDR_INIT - solicit data header and digest initialize
- * XMSTATE_SOL_HDR - send solicit header
- * XMSTATE_SOL_DATA - send solicit data
+ * XMSTATE_BIT_SOL_HDR_INIT - solicit data header and digest initialize
+ * XMSTATE_BIT_SOL_HDR - send solicit header
+ * XMSTATE_BIT_SOL_DATA - send solicit data
*
*iscsi_tcp_ctask_xmit
- * XMSTATE_IMM_DATA - xmit managment data (??)
+ * XMSTATE_BIT_IMM_DATA - xmit managment data (??)
**/
static int
iscsi_tcp_ctask_xmit(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
if (ctask->sc->sc_data_direction != DMA_TO_DEVICE)
return 0;
- if (tcp_ctask->xmstate & XMSTATE_IMM_DATA) {
+ if (test_bit(XMSTATE_BIT_IMM_DATA, &tcp_ctask->xmstate)) {
rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg,
&tcp_ctask->sent, &ctask->imm_count,
&tcp_ctask->immbuf, &tcp_ctask->immdigest);
if (rc)
return rc;
- tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA;
+ clear_bit(XMSTATE_BIT_IMM_DATA, &tcp_ctask->xmstate);
}
rc = iscsi_send_unsol_pdu(conn, ctask);
iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask)
{
struct iscsi_tcp_mgmt_task *tcp_mtask = mtask->dd_data;
- tcp_mtask->xmstate = XMSTATE_IMM_HDR_INIT;
+ tcp_mtask->xmstate = 1 << XMSTATE_BIT_IMM_HDR_INIT;
}
static int
#define IN_PROGRESS_PAD_RECV 0x4
/* xmit state machine */
-#define XMSTATE_IDLE 0x0
-#define XMSTATE_CMD_HDR_INIT 0x1
-#define XMSTATE_CMD_HDR_XMIT 0x2
-#define XMSTATE_IMM_HDR 0x4
-#define XMSTATE_IMM_DATA 0x8
-#define XMSTATE_UNS_INIT 0x10
-#define XMSTATE_UNS_HDR 0x20
-#define XMSTATE_UNS_DATA 0x40
-#define XMSTATE_SOL_HDR 0x80
-#define XMSTATE_SOL_DATA 0x100
-#define XMSTATE_W_PAD 0x200
-#define XMSTATE_W_RESEND_PAD 0x400
-#define XMSTATE_W_RESEND_DATA_DIGEST 0x800
-#define XMSTATE_IMM_HDR_INIT 0x1000
-#define XMSTATE_SOL_HDR_INIT 0x2000
+#define XMSTATE_VALUE_IDLE 0
+#define XMSTATE_BIT_CMD_HDR_INIT 0
+#define XMSTATE_BIT_CMD_HDR_XMIT 1
+#define XMSTATE_BIT_IMM_HDR 2
+#define XMSTATE_BIT_IMM_DATA 3
+#define XMSTATE_BIT_UNS_INIT 4
+#define XMSTATE_BIT_UNS_HDR 5
+#define XMSTATE_BIT_UNS_DATA 6
+#define XMSTATE_BIT_SOL_HDR 7
+#define XMSTATE_BIT_SOL_DATA 8
+#define XMSTATE_BIT_W_PAD 9
+#define XMSTATE_BIT_W_RESEND_PAD 10
+#define XMSTATE_BIT_W_RESEND_DATA_DIGEST 11
+#define XMSTATE_BIT_IMM_HDR_INIT 12
+#define XMSTATE_BIT_SOL_HDR_INIT 13
#define ISCSI_PAD_LEN 4
#define ISCSI_SG_TABLESIZE SG_ALL
struct iscsi_tcp_mgmt_task {
struct iscsi_hdr hdr;
char hdrext[sizeof(__u32)]; /* Header-Digest */
- int xmstate; /* mgmt xmit progress */
+ unsigned long xmstate; /* mgmt xmit progress */
struct iscsi_buf headbuf; /* header buffer */
struct iscsi_buf sendbuf; /* in progress buffer */
int sent;
int pad_count; /* padded bytes */
struct iscsi_buf headbuf; /* header buf (xmit) */
struct iscsi_buf sendbuf; /* in progress buffer*/
- int xmstate; /* xmit xtate machine */
+ unsigned long xmstate; /* xmit xtate machine */
int sent;
struct scatterlist *sg; /* per-cmd SG list */
struct scatterlist *bad_sg; /* assert statement */
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
}
- if (sc->sc_data_direction == DMA_TO_DEVICE)
- goto out;
-
if (rhdr->flags & ISCSI_FLAG_CMD_UNDERFLOW) {
int res_count = be32_to_cpu(rhdr->residual_count);
if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW,
- "ncr5380", instance)) {
+ "ncr5380", instance)) {
printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
int macscsi_release (struct Scsi_Host *shpnt)
{
if (shpnt->irq != SCSI_IRQ_NONE)
- free_irq (shpnt->irq, NCR5380_intr);
+ free_irq(shpnt->irq, shpnt);
NCR5380_exit(shpnt);
return 0;
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, pas16_intr, IRQF_DISABLED, "pas16", instance)) {
+ if (request_irq(instance->irq, pas16_intr, IRQF_DISABLED,
+ "pas16", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
static int pas16_release(struct Scsi_Host *shost)
{
if (shost->irq)
- free_irq(shost->irq, NULL);
+ free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->dma_channel != 0xff)
free_dma(shost->dma_channel);
}
/* Release memory used for this I/O */
- if (cmd->use_sg) {
- pci_unmap_sg(ha->pdev, cmd->request_buffer,
- cmd->use_sg, cmd->sc_data_direction);
- } else if (cmd->request_bufflen) {
- pci_unmap_single(ha->pdev, sp->saved_dma_handle,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- }
+ scsi_dma_unmap(cmd);
/* Call the mid-level driver interrupt handler */
CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
break;
case CS_DATA_UNDERRUN:
- if ((cp->request_bufflen - residual_length) <
+ if ((scsi_bufflen(cp) - residual_length) <
cp->underflow) {
printk(KERN_WARNING
"scsi: Underflow detected - retrying "
"command.\n");
host_status = DID_ERROR;
} else {
- cp->resid = residual_length;
+ scsi_set_resid(cp, residual_length);
host_status = DID_OK;
}
break;
struct device_reg __iomem *reg = ha->iobase;
struct scsi_cmnd *cmd = sp->cmd;
cmd_a64_entry_t *pkt;
- struct scatterlist *sg = NULL, *s;
__le32 *dword_ptr;
dma_addr_t dma_handle;
int status = 0;
int cnt;
int req_cnt;
- u16 seg_cnt;
+ int seg_cnt;
u8 dir;
ENTER("qla1280_64bit_start_scsi:");
/* Calculate number of entries and segments required. */
req_cnt = 1;
- if (cmd->use_sg) {
- sg = (struct scatterlist *) cmd->request_buffer;
- seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg,
- cmd->sc_data_direction);
-
+ seg_cnt = scsi_dma_map(cmd);
+ if (seg_cnt > 0) {
if (seg_cnt > 2) {
req_cnt += (seg_cnt - 2) / 5;
if ((seg_cnt - 2) % 5)
req_cnt++;
}
- } else if (cmd->request_bufflen) { /* If data transfer. */
- seg_cnt = 1;
- } else {
- seg_cnt = 0;
+ } else if (seg_cnt < 0) {
+ status = 1;
+ goto out;
}
if ((req_cnt + 2) >= ha->req_q_cnt) {
* Load data segments.
*/
if (seg_cnt) { /* If data transfer. */
+ struct scatterlist *sg, *s;
int remseg = seg_cnt;
+
+ sg = scsi_sglist(cmd);
+
/* Setup packet address segment pointer. */
dword_ptr = (u32 *)&pkt->dseg_0_address;
- if (cmd->use_sg) { /* If scatter gather */
- /* Load command entry data segments. */
- for_each_sg(sg, s, seg_cnt, cnt) {
- if (cnt == 2)
+ /* Load command entry data segments. */
+ for_each_sg(sg, s, seg_cnt, cnt) {
+ if (cnt == 2)
+ break;
+
+ dma_handle = sg_dma_address(s);
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
+ if (ha->flags.use_pci_vchannel)
+ sn_pci_set_vchan(ha->pdev,
+ (unsigned long *)&dma_handle,
+ SCSI_BUS_32(cmd));
+#endif
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_lo32(dma_handle));
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_hi32(dma_handle));
+ *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
+ dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
+ cpu_to_le32(pci_dma_hi32(dma_handle)),
+ cpu_to_le32(pci_dma_lo32(dma_handle)),
+ cpu_to_le32(sg_dma_len(sg_next(s))));
+ remseg--;
+ }
+ dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
+ "command packet data - b %i, t %i, l %i \n",
+ SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
+ SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt,
+ REQUEST_ENTRY_SIZE);
+
+ /*
+ * Build continuation packets.
+ */
+ dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
+ "remains\n", seg_cnt);
+
+ while (remseg > 0) {
+ /* Update sg start */
+ sg = s;
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr =
+ ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
+
+ /* Zero out packet. */
+ memset(pkt, 0, REQUEST_ENTRY_SIZE);
+
+ /* Load packet defaults. */
+ ((struct cont_a64_entry *) pkt)->entry_type =
+ CONTINUE_A64_TYPE;
+ ((struct cont_a64_entry *) pkt)->entry_count = 1;
+ ((struct cont_a64_entry *) pkt)->sys_define =
+ (uint8_t)ha->req_ring_index;
+ /* Setup packet address segment pointer. */
+ dword_ptr =
+ (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
+
+ /* Load continuation entry data segments. */
+ for_each_sg(sg, s, remseg, cnt) {
+ if (cnt == 5)
break;
dma_handle = sg_dma_address(s);
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
if (ha->flags.use_pci_vchannel)
sn_pci_set_vchan(ha->pdev,
- (unsigned long *)&dma_handle,
+ (unsigned long *)&dma_handle,
SCSI_BUS_32(cmd));
#endif
*dword_ptr++ =
cpu_to_le32(pci_dma_lo32(dma_handle));
*dword_ptr++ =
cpu_to_le32(pci_dma_hi32(dma_handle));
- *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
- dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
+ *dword_ptr++ =
+ cpu_to_le32(sg_dma_len(s));
+ dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
cpu_to_le32(pci_dma_hi32(dma_handle)),
cpu_to_le32(pci_dma_lo32(dma_handle)),
- cpu_to_le32(sg_dma_len(sg_next(s))));
- remseg--;
+ cpu_to_le32(sg_dma_len(s)));
}
- dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
- "command packet data - b %i, t %i, l %i \n",
- SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
- SCSI_LUN_32(cmd));
- qla1280_dump_buffer(5, (char *)pkt,
- REQUEST_ENTRY_SIZE);
-
- /*
- * Build continuation packets.
- */
- dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
- "remains\n", seg_cnt);
-
- while (remseg > 0) {
- /* Update sg start */
- sg = s;
- /* Adjust ring index. */
- ha->req_ring_index++;
- if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
- ha->req_ring_index = 0;
- ha->request_ring_ptr =
- ha->request_ring;
- } else
- ha->request_ring_ptr++;
-
- pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
-
- /* Zero out packet. */
- memset(pkt, 0, REQUEST_ENTRY_SIZE);
-
- /* Load packet defaults. */
- ((struct cont_a64_entry *) pkt)->entry_type =
- CONTINUE_A64_TYPE;
- ((struct cont_a64_entry *) pkt)->entry_count = 1;
- ((struct cont_a64_entry *) pkt)->sys_define =
- (uint8_t)ha->req_ring_index;
- /* Setup packet address segment pointer. */
- dword_ptr =
- (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
-
- /* Load continuation entry data segments. */
- for_each_sg(sg, s, remseg, cnt) {
- if (cnt == 5)
- break;
- dma_handle = sg_dma_address(s);
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
- if (ha->flags.use_pci_vchannel)
- sn_pci_set_vchan(ha->pdev,
- (unsigned long *)&dma_handle,
- SCSI_BUS_32(cmd));
-#endif
- *dword_ptr++ =
- cpu_to_le32(pci_dma_lo32(dma_handle));
- *dword_ptr++ =
- cpu_to_le32(pci_dma_hi32(dma_handle));
- *dword_ptr++ =
- cpu_to_le32(sg_dma_len(s));
- dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
- cpu_to_le32(pci_dma_hi32(dma_handle)),
- cpu_to_le32(pci_dma_lo32(dma_handle)),
- cpu_to_le32(sg_dma_len(s)));
- }
- remseg -= cnt;
- dprintk(5, "qla1280_64bit_start_scsi: "
- "continuation packet data - b %i, t "
- "%i, l %i \n", SCSI_BUS_32(cmd),
- SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
- qla1280_dump_buffer(5, (char *)pkt,
- REQUEST_ENTRY_SIZE);
- }
- } else { /* No scatter gather data transfer */
- dma_handle = pci_map_single(ha->pdev,
- cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
-
- sp->saved_dma_handle = dma_handle;
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
- if (ha->flags.use_pci_vchannel)
- sn_pci_set_vchan(ha->pdev,
- (unsigned long *)&dma_handle,
- SCSI_BUS_32(cmd));
-#endif
- *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle));
- *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle));
- *dword_ptr = cpu_to_le32(cmd->request_bufflen);
-
- dprintk(5, "qla1280_64bit_start_scsi: No scatter/"
- "gather command packet data - b %i, t %i, "
- "l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
- SCSI_LUN_32(cmd));
+ remseg -= cnt;
+ dprintk(5, "qla1280_64bit_start_scsi: "
+ "continuation packet data - b %i, t "
+ "%i, l %i \n", SCSI_BUS_32(cmd),
+ SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
qla1280_dump_buffer(5, (char *)pkt,
REQUEST_ENTRY_SIZE);
}
struct device_reg __iomem *reg = ha->iobase;
struct scsi_cmnd *cmd = sp->cmd;
struct cmd_entry *pkt;
- struct scatterlist *sg = NULL, *s;
__le32 *dword_ptr;
int status = 0;
int cnt;
int req_cnt;
- uint16_t seg_cnt;
+ int seg_cnt;
dma_addr_t dma_handle;
u8 dir;
cmd->cmnd[0]);
/* Calculate number of entries and segments required. */
- req_cnt = 1;
- if (cmd->use_sg) {
- /*
- * We must build an SG list in adapter format, as the kernel's
- * SG list cannot be used directly because of data field size
- * (__alpha__) differences and the kernel SG list uses virtual
- * addresses where we need physical addresses.
- */
- sg = (struct scatterlist *) cmd->request_buffer;
- seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg,
- cmd->sc_data_direction);
-
+ seg_cnt = scsi_dma_map(cmd);
+ if (seg_cnt) {
/*
* if greater than four sg entries then we need to allocate
* continuation entries
}
dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n",
cmd, seg_cnt, req_cnt);
- } else if (cmd->request_bufflen) { /* If data transfer. */
- dprintk(3, "No S/G transfer t=%x cmd=%p len=%x CDB=%x\n",
- SCSI_TCN_32(cmd), cmd, cmd->request_bufflen,
- cmd->cmnd[0]);
- seg_cnt = 1;
- } else {
- /* dprintk(1, "No data transfer \n"); */
- seg_cnt = 0;
+ } else if (seg_cnt < 0) {
+ status = 1;
+ goto out;
}
if ((req_cnt + 2) >= ha->req_q_cnt) {
* Load data segments.
*/
if (seg_cnt) {
+ struct scatterlist *sg, *s;
int remseg = seg_cnt;
+
+ sg = scsi_sglist(cmd);
+
/* Setup packet address segment pointer. */
dword_ptr = &pkt->dseg_0_address;
- if (cmd->use_sg) { /* If scatter gather */
- dprintk(3, "Building S/G data segments..\n");
- qla1280_dump_buffer(1, (char *)sg, 4 * 16);
+ dprintk(3, "Building S/G data segments..\n");
+ qla1280_dump_buffer(1, (char *)sg, 4 * 16);
+
+ /* Load command entry data segments. */
+ for_each_sg(sg, s, seg_cnt, cnt) {
+ if (cnt == 4)
+ break;
+ *dword_ptr++ =
+ cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));
+ *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
+ dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
+ (pci_dma_lo32(sg_dma_address(s))),
+ (sg_dma_len(s)));
+ remseg--;
+ }
+ /*
+ * Build continuation packets.
+ */
+ dprintk(3, "S/G Building Continuation"
+ "...seg_cnt=0x%x remains\n", seg_cnt);
+ while (remseg > 0) {
+ /* Continue from end point */
+ sg = s;
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr =
+ ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ pkt = (struct cmd_entry *)ha->request_ring_ptr;
+
+ /* Zero out packet. */
+ memset(pkt, 0, REQUEST_ENTRY_SIZE);
+
+ /* Load packet defaults. */
+ ((struct cont_entry *) pkt)->
+ entry_type = CONTINUE_TYPE;
+ ((struct cont_entry *) pkt)->entry_count = 1;
- /* Load command entry data segments. */
- for_each_sg(sg, s, seg_cnt, cnt) {
- if (cnt == 4)
+ ((struct cont_entry *) pkt)->sys_define =
+ (uint8_t) ha->req_ring_index;
+
+ /* Setup packet address segment pointer. */
+ dword_ptr =
+ &((struct cont_entry *) pkt)->dseg_0_address;
+
+ /* Load continuation entry data segments. */
+ for_each_sg(sg, s, remseg, cnt) {
+ if (cnt == 7)
break;
*dword_ptr++ =
cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));
- *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
- dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
- (pci_dma_lo32(sg_dma_address(s))),
- (sg_dma_len(s)));
- remseg--;
- }
- /*
- * Build continuation packets.
- */
- dprintk(3, "S/G Building Continuation"
- "...seg_cnt=0x%x remains\n", seg_cnt);
- while (remseg > 0) {
- /* Continue from end point */
- sg = s;
- /* Adjust ring index. */
- ha->req_ring_index++;
- if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
- ha->req_ring_index = 0;
- ha->request_ring_ptr =
- ha->request_ring;
- } else
- ha->request_ring_ptr++;
-
- pkt = (struct cmd_entry *)ha->request_ring_ptr;
-
- /* Zero out packet. */
- memset(pkt, 0, REQUEST_ENTRY_SIZE);
-
- /* Load packet defaults. */
- ((struct cont_entry *) pkt)->
- entry_type = CONTINUE_TYPE;
- ((struct cont_entry *) pkt)->entry_count = 1;
-
- ((struct cont_entry *) pkt)->sys_define =
- (uint8_t) ha->req_ring_index;
-
- /* Setup packet address segment pointer. */
- dword_ptr =
- &((struct cont_entry *) pkt)->dseg_0_address;
-
- /* Load continuation entry data segments. */
- for_each_sg(sg, s, remseg, cnt) {
- if (cnt == 7)
- break;
- *dword_ptr++ =
- cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));
- *dword_ptr++ =
- cpu_to_le32(sg_dma_len(s));
- dprintk(1,
- "S/G Segment Cont. phys_addr=0x%x, "
- "len=0x%x\n",
- cpu_to_le32(pci_dma_lo32(sg_dma_address(s))),
- cpu_to_le32(sg_dma_len(s)));
- }
- remseg -= cnt;
- dprintk(5, "qla1280_32bit_start_scsi: "
- "continuation packet data - "
- "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
- SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
- qla1280_dump_buffer(5, (char *)pkt,
- REQUEST_ENTRY_SIZE);
+ *dword_ptr++ =
+ cpu_to_le32(sg_dma_len(s));
+ dprintk(1,
+ "S/G Segment Cont. phys_addr=0x%x, "
+ "len=0x%x\n",
+ cpu_to_le32(pci_dma_lo32(sg_dma_address(s))),
+ cpu_to_le32(sg_dma_len(s)));
}
- } else { /* No S/G data transfer */
- dma_handle = pci_map_single(ha->pdev,
- cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- sp->saved_dma_handle = dma_handle;
-
- *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle));
- *dword_ptr = cpu_to_le32(cmd->request_bufflen);
+ remseg -= cnt;
+ dprintk(5, "qla1280_32bit_start_scsi: "
+ "continuation packet data - "
+ "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
+ SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
+ qla1280_dump_buffer(5, (char *)pkt,
+ REQUEST_ENTRY_SIZE);
}
} else { /* No data transfer at all */
dprintk(5, "qla1280_32bit_start_scsi: No data, command "
for (i = 0; i < cmd->cmd_len; i++) {
printk("0x%02x ", cmd->cmnd[i]);
}
- printk(" seg_cnt =%d\n", cmd->use_sg);
+ printk(" seg_cnt =%d\n", scsi_sg_count(cmd));
printk(" request buffer=0x%p, request buffer len=0x%x\n",
- cmd->request_buffer, cmd->request_bufflen);
+ scsi_sglist(cmd), scsi_bufflen(cmd));
/* if (cmd->use_sg)
{
sg = (struct scatterlist *) cmd->request_buffer;
* starget_for_each_device - helper to walk all devices of a target
* @starget: target whose devices we want to iterate over.
*
- * This traverses over each devices of @shost. The devices have
+ * This traverses over each device of @starget. The devices have
* a reference that must be released by scsi_host_put when breaking
* out of the loop.
*/
-void starget_for_each_device(struct scsi_target *starget, void * data,
+void starget_for_each_device(struct scsi_target *starget, void *data,
void (*fn)(struct scsi_device *, void *))
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
}
EXPORT_SYMBOL(starget_for_each_device);
+/**
+ * __starget_for_each_device - helper to walk all devices of a target
+ * (UNLOCKED)
+ * @starget: target whose devices we want to iterate over.
+ *
+ * This traverses over each device of @starget. It does _not_
+ * take a reference on the scsi_device, so the whole loop must be
+ * protected by shost->host_lock.
+ *
+ * Note: The only reason why drivers would want to use this is because
+ * they need to access the device list in irq context. Otherwise you
+ * really want to use starget_for_each_device instead.
+ **/
+void __starget_for_each_device(struct scsi_target *starget, void *data,
+ void (*fn)(struct scsi_device *, void *))
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct scsi_device *sdev;
+
+ __shost_for_each_device(sdev, shost) {
+ if ((sdev->channel == starget->channel) &&
+ (sdev->id == starget->id))
+ fn(sdev, data);
+ }
+}
+EXPORT_SYMBOL(__starget_for_each_device);
+
/**
* __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
* @starget: SCSI target pointer
((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
if (request_irq(instance->irq, scsi_sun3_intr,
- 0, "Sun3SCSI-5380", NULL)) {
+ 0, "Sun3SCSI-5380", instance)) {
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
int sun3scsi_release (struct Scsi_Host *shpnt)
{
if (shpnt->irq != SCSI_IRQ_NONE)
- free_irq (shpnt->irq, NULL);
+ free_irq(shpnt->irq, shpnt);
iounmap((void *)sun3_scsi_regp);
((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
if (request_irq(instance->irq, scsi_sun3_intr,
- 0, "Sun3SCSI-5380VME", NULL)) {
+ 0, "Sun3SCSI-5380VME", instance)) {
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
int sun3scsi_release (struct Scsi_Host *shpnt)
{
if (shpnt->irq != SCSI_IRQ_NONE)
- free_irq (shpnt->irq, NULL);
+ free_irq(shpnt->irq, shpnt);
iounmap((void *)sun3_scsi_regp);
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, t128_intr, IRQF_DISABLED, "t128", instance)) {
+ if (request_irq(instance->irq, t128_intr, IRQF_DISABLED, "t128",
+ instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
NCR5380_local_declare();
NCR5380_setup(shost);
if (shost->irq)
- free_irq(shost->irq, NULL);
+ free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/zorro.h>
+
+#include <asm/amigahw.h>
#include <asm/amigaints.h>
+
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_spi.h>
config SERIAL_BFIN
tristate "Blackfin serial port support"
- depends on BFIN
+ depends on BLACKFIN
select SERIAL_CORE
select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
help
#include "ip22zilog.h"
-void ip22_do_break(void);
-
/*
* On IP22 we need to delay after register accesses but we do not need to
* flush writes.
#define IP22ZILOG_FLAG_REGS_HELD 0x00000040
#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080
#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100
+#define IP22ZILOG_FLAG_RESET_DONE 0x00000200
- unsigned int cflag;
-
- /* L1-A keyboard break state. */
- int kbd_id;
- int l1_down;
+ unsigned int tty_break;
unsigned char parity_mask;
unsigned char prev_status;
}
}
-static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
- struct zilog_channel *channel)
+#define Rx_BRK 0x0100 /* BREAK event software flag. */
+#define Rx_SYS 0x0200 /* SysRq event software flag. */
+
+static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
+ struct zilog_channel *channel)
{
- struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */
+ struct tty_struct *tty;
+ unsigned char ch, flag;
+ unsigned int r1;
+
+ tty = NULL;
+ if (up->port.info != NULL &&
+ up->port.info->tty != NULL)
+ tty = up->port.info->tty;
- while (1) {
- unsigned char ch, r1, flag;
+ for (;;) {
+ ch = readb(&channel->control);
+ ZSDELAY();
+ if (!(ch & Rx_CH_AV))
+ break;
r1 = read_zsreg(channel, R1);
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
ZS_WSYNC(channel);
}
- ch = readb(&channel->control);
- ZSDELAY();
-
- /* This funny hack depends upon BRK_ABRT not interfering
- * with the other bits we care about in R1.
- */
- if (ch & BRK_ABRT)
- r1 |= BRK_ABRT;
-
ch = readb(&channel->data);
ZSDELAY();
ch &= up->parity_mask;
- if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) {
- /* Wait for BREAK to deassert to avoid potentially
- * confusing the PROM.
- */
- while (1) {
- ch = readb(&channel->control);
- ZSDELAY();
- if (!(ch & BRK_ABRT))
- break;
- }
- ip22_do_break();
- return;
- }
+ /* Handle the null char got when BREAK is removed. */
+ if (!ch)
+ r1 |= up->tty_break;
/* A real serial line, record the character and status. */
flag = TTY_NORMAL;
up->port.icount.rx++;
- if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
- if (r1 & BRK_ABRT) {
- r1 &= ~(PAR_ERR | CRC_ERR);
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) {
+ up->tty_break = 0;
+
+ if (r1 & (Rx_SYS | Rx_BRK)) {
up->port.icount.brk++;
- if (uart_handle_break(&up->port))
- goto next_char;
+ if (r1 & Rx_SYS)
+ continue;
+ r1 &= ~(PAR_ERR | CRC_ERR);
}
else if (r1 & PAR_ERR)
up->port.icount.parity++;
if (r1 & Rx_OVR)
up->port.icount.overrun++;
r1 &= up->port.read_status_mask;
- if (r1 & BRK_ABRT)
+ if (r1 & Rx_BRK)
flag = TTY_BREAK;
else if (r1 & PAR_ERR)
flag = TTY_PARITY;
else if (r1 & CRC_ERR)
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&up->port, ch))
- goto next_char;
- if (up->port.ignore_status_mask == 0xff ||
- (r1 & up->port.ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
+ if (uart_handle_sysrq_char(&up->port, ch))
+ continue;
- if (r1 & Rx_OVR)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- next_char:
- ch = readb(&channel->control);
- ZSDELAY();
- if (!(ch & Rx_CH_AV))
- break;
+ if (tty)
+ uart_insert_char(&up->port, r1, Rx_OVR, ch, flag);
}
-
- tty_flip_buffer_push(tty);
+ return tty;
}
static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
ZSDELAY();
ZS_WSYNC(channel);
+ if (up->curregs[R15] & BRKIE) {
+ if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) {
+ if (uart_handle_break(&up->port))
+ up->tty_break = Rx_SYS;
+ else
+ up->tty_break = Rx_BRK;
+ }
+ }
+
if (ZS_WANTS_MODEM_STATUS(up)) {
if (status & SYNC)
up->port.icount.dsr++;
* But it does not tell us which bit has changed, we have to keep
* track of this ourselves.
*/
- if ((status & DCD) ^ up->prev_status)
+ if ((status ^ up->prev_status) ^ DCD)
uart_handle_dcd_change(&up->port,
(status & DCD));
- if ((status & CTS) ^ up->prev_status)
+ if ((status ^ up->prev_status) ^ CTS)
uart_handle_cts_change(&up->port,
(status & CTS));
while (up) {
struct zilog_channel *channel
= ZILOG_CHANNEL_FROM_PORT(&up->port);
+ struct tty_struct *tty;
unsigned char r3;
spin_lock(&up->port.lock);
r3 = read_zsreg(channel, R3);
/* Channel A */
+ tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHARxIP)
- ip22zilog_receive_chars(up, channel);
+ tty = ip22zilog_receive_chars(up, channel);
if (r3 & CHAEXT)
ip22zilog_status_handle(up, channel);
if (r3 & CHATxIP)
}
spin_unlock(&up->port.lock);
+ if (tty)
+ tty_flip_buffer_push(tty);
+
/* Channel B */
up = up->next;
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
spin_lock(&up->port.lock);
+ tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHBRxIP)
- ip22zilog_receive_chars(up, channel);
+ tty = ip22zilog_receive_chars(up, channel);
if (r3 & CHBEXT)
ip22zilog_status_handle(up, channel);
if (r3 & CHBTxIP)
}
spin_unlock(&up->port.lock);
+ if (tty)
+ tty_flip_buffer_push(tty);
+
up = up->next;
}
spin_unlock_irqrestore(&port->lock, flags);
}
+static void __ip22zilog_reset(struct uart_ip22zilog_port *up)
+{
+ struct zilog_channel *channel;
+ int i;
+
+ if (up->flags & IP22ZILOG_FLAG_RESET_DONE)
+ return;
+
+ /* Let pending transmits finish. */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ for (i = 0; i < 1000; i++) {
+ unsigned char stat = read_zsreg(channel, R1);
+ if (stat & ALL_SNT)
+ break;
+ udelay(100);
+ }
+
+ if (!ZS_IS_CHANNEL_A(up)) {
+ up++;
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ }
+ write_zsreg(channel, R9, FHWRES);
+ ZSDELAY_LONG();
+ (void) read_zsreg(channel, R0);
+
+ up->flags |= IP22ZILOG_FLAG_RESET_DONE;
+ up->next->flags |= IP22ZILOG_FLAG_RESET_DONE;
+}
+
static void __ip22zilog_startup(struct uart_ip22zilog_port *up)
{
struct zilog_channel *channel;
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+ __ip22zilog_reset(up);
+
+ __load_zsregs(channel, up->curregs);
+ /* set master interrupt enable */
+ write_zsreg(channel, R9, up->curregs[R9]);
up->prev_status = readb(&channel->control);
/* Enable receiver and transmitter. */
else
up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS;
- up->cflag = termios->c_cflag;
-
ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
uart_update_timeout(port, termios->c_cflag, baud);
spin_unlock_irqrestore(&up->port.lock, flags);
}
-void
-ip22serial_console_termios(struct console *con, char *options)
-{
- int baud = 9600, bits = 8, cflag;
- int parity = 'n';
- int flow = 'n';
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- cflag = CREAD | HUPCL | CLOCAL;
-
- switch (baud) {
- case 150: cflag |= B150; break;
- case 300: cflag |= B300; break;
- case 600: cflag |= B600; break;
- case 1200: cflag |= B1200; break;
- case 2400: cflag |= B2400; break;
- case 4800: cflag |= B4800; break;
- case 9600: cflag |= B9600; break;
- case 19200: cflag |= B19200; break;
- case 38400: cflag |= B38400; break;
- default: baud = 9600; cflag |= B9600; break;
- }
-
- con->cflag = cflag | CS8; /* 8N1 */
-
- uart_update_timeout(&ip22zilog_port_table[con->index].port, cflag, baud);
-}
-
static int __init ip22zilog_console_setup(struct console *con, char *options)
{
struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
unsigned long flags;
- int baud, brg;
-
- printk("Console: ttyS%d (IP22-Zilog)\n", con->index);
+ int baud = 9600, bits = 8;
+ int parity = 'n';
+ int flow = 'n';
- /* Get firmware console settings. */
- ip22serial_console_termios(con, options);
+ up->flags |= IP22ZILOG_FLAG_IS_CONS;
- /* Firmware console speed is limited to 150-->38400 baud so
- * this hackish cflag thing is OK.
- */
- switch (con->cflag & CBAUD) {
- case B150: baud = 150; break;
- case B300: baud = 300; break;
- case B600: baud = 600; break;
- case B1200: baud = 1200; break;
- case B2400: baud = 2400; break;
- case B4800: baud = 4800; break;
- default: case B9600: baud = 9600; break;
- case B19200: baud = 19200; break;
- case B38400: baud = 38400; break;
- };
-
- brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index);
spin_lock_irqsave(&up->port.lock, flags);
- up->curregs[R15] = BRKIE;
- ip22zilog_convert_to_zs(up, con->cflag, 0, brg);
+ up->curregs[R15] |= BRKIE;
__ip22zilog_startup(up);
spin_unlock_irqrestore(&up->port.lock, flags);
- return 0;
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ return uart_set_options(&up->port, con, baud, parity, bits, flow);
}
static struct uart_driver ip22zilog_reg;
up[(chip * 2) + 1].port.line = (chip * 2) + 1;
up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
}
-}
-
-static void __init ip22zilog_init_hw(void)
-{
- int i;
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
- struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
- unsigned long flags;
- int baud, brg;
- spin_lock_irqsave(&up->port.lock, flags);
-
- if (ZS_IS_CHANNEL_A(up)) {
- write_zsreg(channel, R9, FHWRES);
- ZSDELAY_LONG();
- (void) read_zsreg(channel, R0);
- }
+ for (channel = 0; channel < NUM_CHANNELS; channel++) {
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel];
+ int brg;
/* Normal serial TTY. */
up->parity_mask = 0xff;
up->curregs[R9] = NV | MIE;
up->curregs[R10] = NRZ;
up->curregs[R11] = TCBR | RCBR;
- baud = 9600;
- brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR);
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
up->curregs[R14] = BRENAB;
- __load_zsregs(channel, up->curregs);
- /* set master interrupt enable */
- write_zsreg(channel, R9, up->curregs[R9]);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
}
}
panic("IP22-Zilog: Unable to register zs interrupt handler.\n");
}
- ip22zilog_init_hw();
-
ret = uart_register_driver(&ip22zilog_reg);
if (ret == 0) {
int i;
return up->name;
}
-#ifdef CONFIG_SERIAL_PXA_CONSOLE
-
static struct uart_pxa_port *serial_pxa_ports[4];
static struct uart_driver serial_pxa_reg;
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
#include "suncore.h"
-int sunserial_current_minor = 64;
+static int sunserial_current_minor = 64;
-EXPORT_SYMBOL(sunserial_current_minor);
+int sunserial_register_minors(struct uart_driver *drv, int count)
+{
+ int err = 0;
+
+ drv->minor = sunserial_current_minor;
+ drv->nr += count;
+ /* Register the driver on the first call */
+ if (drv->nr == count)
+ err = uart_register_driver(drv);
+ if (err == 0) {
+ sunserial_current_minor += count;
+ drv->tty_driver->name_base = drv->minor - 64;
+ }
+ return err;
+}
+EXPORT_SYMBOL(sunserial_register_minors);
+
+void sunserial_unregister_minors(struct uart_driver *drv, int count)
+{
+ drv->nr -= count;
+ sunserial_current_minor -= count;
+
+ if (drv->nr == 0)
+ uart_unregister_driver(drv);
+}
+EXPORT_SYMBOL(sunserial_unregister_minors);
-int sunserial_console_match(struct console *con, struct device_node *dp,
+int __init sunserial_console_match(struct console *con, struct device_node *dp,
struct uart_driver *drv, int line)
{
int off;
con->cflag = cflag;
}
-EXPORT_SYMBOL(sunserial_console_termios);
-
/* Sun serial MOUSE auto baud rate detection. */
static struct mouse_baud_cflag {
int baud;
extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *);
extern int suncore_mouse_baud_detection(unsigned char, int);
-extern int sunserial_current_minor;
+extern int sunserial_register_minors(struct uart_driver *, int);
+extern void sunserial_unregister_minors(struct uart_driver *, int);
extern int sunserial_console_match(struct console *, struct device_node *,
struct uart_driver *, int);
port->dev = &op->dev;
- sunhv_reg.minor = sunserial_current_minor;
- sunhv_reg.nr = 1;
-
- err = uart_register_driver(&sunhv_reg);
+ err = sunserial_register_minors(&sunhv_reg, 1);
if (err)
goto out_free_con_read_page;
- sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64;
- sunserial_current_minor += 1;
-
sunserial_console_match(&sunhv_console, op->node,
&sunhv_reg, port->line);
uart_remove_one_port(&sunhv_reg, port);
out_unregister_driver:
- sunserial_current_minor -= 1;
- uart_unregister_driver(&sunhv_reg);
+ sunserial_unregister_minors(&sunhv_reg, 1);
out_free_con_read_page:
kfree(con_read_page);
uart_remove_one_port(&sunhv_reg, port);
- sunserial_current_minor -= 1;
- uart_unregister_driver(&sunhv_reg);
+ sunserial_unregister_minors(&sunhv_reg, 1);
kfree(port);
sunhv_port = NULL;
};
static struct uart_sunsab_port *sunsab_ports;
-static int num_channels;
#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
{
struct device_node *dp;
int err;
+ int num_channels = 0;
- num_channels = 0;
for_each_node_by_name(dp, "se")
num_channels += 2;
for_each_node_by_name(dp, "serial") {
if (!sunsab_ports)
return -ENOMEM;
- sunsab_reg.minor = sunserial_current_minor;
- sunsab_reg.nr = num_channels;
sunsab_reg.cons = SUNSAB_CONSOLE();
-
- err = uart_register_driver(&sunsab_reg);
+ err = sunserial_register_minors(&sunsab_reg, num_channels);
if (err) {
kfree(sunsab_ports);
sunsab_ports = NULL;
return err;
}
-
- sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64;
- sunserial_current_minor += num_channels;
}
return of_register_driver(&sab_driver, &of_bus_type);
static void __exit sunsab_exit(void)
{
of_unregister_driver(&sab_driver);
- if (num_channels) {
- sunserial_current_minor -= num_channels;
- uart_unregister_driver(&sunsab_reg);
+ if (sunsab_reg.nr) {
+ sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
}
kfree(sunsab_ports);
.remove = __devexit_p(su_remove),
};
-static int num_uart;
-
static int __init sunsu_init(void)
{
struct device_node *dp;
int err;
+ int num_uart = 0;
- num_uart = 0;
for_each_node_by_name(dp, "su") {
if (su_get_type(dp) == SU_PORT_PORT)
num_uart++;
}
if (num_uart) {
- sunsu_reg.minor = sunserial_current_minor;
- sunsu_reg.nr = num_uart;
- err = uart_register_driver(&sunsu_reg);
+ err = sunserial_register_minors(&sunsu_reg, num_uart);
if (err)
return err;
- sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64;
- sunserial_current_minor += num_uart;
}
err = of_register_driver(&su_driver, &of_bus_type);
if (err && num_uart)
- uart_unregister_driver(&sunsu_reg);
+ sunserial_unregister_minors(&sunsu_reg, num_uart);
return err;
}
static void __exit sunsu_exit(void)
{
- if (num_uart)
- uart_unregister_driver(&sunsu_reg);
+ if (sunsu_reg.nr)
+ sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
}
module_init(sunsu_init);
readb(&((__channel)->control))
#endif
-static int num_sunzilog;
-#define NUM_SUNZILOG num_sunzilog
-#define NUM_CHANNELS (NUM_SUNZILOG * 2)
-
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
.major = TTY_MAJOR,
};
-static int __init sunzilog_alloc_tables(void)
+static int __init sunzilog_alloc_tables(int num_sunzilog)
{
struct uart_sunzilog_port *up;
unsigned long size;
+ int num_channels = num_sunzilog * 2;
int i;
- size = NUM_CHANNELS * sizeof(struct uart_sunzilog_port);
+ size = num_channels * sizeof(struct uart_sunzilog_port);
sunzilog_port_table = kzalloc(size, GFP_KERNEL);
if (!sunzilog_port_table)
return -ENOMEM;
- for (i = 0; i < NUM_CHANNELS; i++) {
+ for (i = 0; i < num_channels; i++) {
up = &sunzilog_port_table[i];
spin_lock_init(&up->port.lock);
if (i == 0)
sunzilog_irq_chain = up;
- if (i < NUM_CHANNELS - 1)
+ if (i < num_channels - 1)
up->next = up + 1;
else
up->next = NULL;
}
- size = NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *);
+ size = num_sunzilog * sizeof(struct zilog_layout __iomem *);
sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
if (!sunzilog_chip_regs) {
kfree(sunzilog_port_table);
struct device_node *dp;
int err, uart_count;
int num_keybms;
+ int num_sunzilog = 0;
- NUM_SUNZILOG = 0;
num_keybms = 0;
for_each_node_by_name(dp, "zs") {
- NUM_SUNZILOG++;
+ num_sunzilog++;
if (of_find_property(dp, "keyboard", NULL))
num_keybms++;
}
uart_count = 0;
- if (NUM_SUNZILOG) {
+ if (num_sunzilog) {
int uart_count;
- err = sunzilog_alloc_tables();
+ err = sunzilog_alloc_tables(num_sunzilog);
if (err)
goto out;
- uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
+ uart_count = (num_sunzilog * 2) - (2 * num_keybms);
- sunzilog_reg.nr = uart_count;
- sunzilog_reg.minor = sunserial_current_minor;
- err = uart_register_driver(&sunzilog_reg);
+ err = sunserial_register_minors(&sunzilog_reg, uart_count);
if (err)
goto out_free_tables;
-
- sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
-
- sunserial_current_minor += uart_count;
}
err = of_register_driver(&zs_driver, &of_bus_type);
of_unregister_driver(&zs_driver);
out_unregister_uart:
- if (NUM_SUNZILOG) {
- uart_unregister_driver(&sunzilog_reg);
+ if (num_sunzilog) {
+ sunserial_unregister_minors(&sunzilog_reg, num_sunzilog);
sunzilog_reg.cons = NULL;
}
zilog_irq = -1;
}
- if (NUM_SUNZILOG) {
- uart_unregister_driver(&sunzilog_reg);
+ if (sunzilog_reg.nr) {
+ sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr);
sunzilog_free_tables();
}
}
continue;
ulite_ports[id].mapbase = res.start;
+ of_node_put(np);
return;
}
}
config SPI_BFIN
tristate "SPI controller driver for ADI Blackfin5xx"
- depends on SPI_MASTER && BFIN
+ depends on SPI_MASTER && BLACKFIN
help
This is the SPI controller master driver for Blackfin 5xx processor.
#include <linux/spi/eeprom.h>
+/*
+ * NOTE: this is an *EEPROM* driver. The vagaries of product naming
+ * mean that some AT25 products are EEPROMs, and others are FLASH.
+ * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver,
+ * not this one!
+ */
+
struct at25_data {
struct spi_device *spi;
struct mutex lock;
xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
- spi_writel(as, TCR, len);
spi_writel(as, RCR, len);
+ spi_writel(as, TCR, len);
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
}
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
npcs_pin = (unsigned int)spi->controller_data;
if (!spi->controller_state) {
- ret = gpio_request(npcs_pin, "spi_npcs");
+ ret = gpio_request(npcs_pin, spi->dev.bus_id);
if (ret)
return ret;
spi->controller_state = (void *)npcs_pin;
#include <asm/arch/pxa2xx_spi.h>
MODULE_AUTHOR("Stephen Street");
-MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller");
+MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
MODULE_LICENSE("GPL");
#define MAX_BUSES 3
* Also, the caller is guaranteeing that the memory associated with the
* message will not be freed before this call returns.
*
- * The return value is a negative error code if the message could not be
- * submitted, else zero. When the value is zero, then message->status is
- * also defined; it's the completion code for the transfer, either zero
- * or a negative error code from the controller driver.
+ * It returns zero on success, else a negative error code.
*/
int spi_sync(struct spi_device *spi, struct spi_message *message)
{
message->complete = spi_complete;
message->context = &done;
status = spi_async(spi, message);
- if (status == 0)
+ if (status == 0) {
wait_for_completion(&done);
+ status = message->status;
+ }
message->context = NULL;
return status;
}
const u8 *txbuf, unsigned n_tx,
u8 *rxbuf, unsigned n_rx)
{
- static DECLARE_MUTEX(lock);
+ static DEFINE_MUTEX(lock);
int status;
struct spi_message message;
}
/* ... unless someone else is using the pre-allocated buffer */
- if (down_trylock(&lock)) {
+ if (!mutex_trylock(&lock)) {
local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
if (!local_buf)
return -ENOMEM;
/* do the i/o */
status = spi_sync(spi, &message);
- if (status == 0) {
+ if (status == 0)
memcpy(rxbuf, x[1].rx_buf, n_rx);
- status = message.status;
- }
if (x[0].tx_buf == buf)
- up(&lock);
+ mutex_unlock(&lock);
else
kfree(local_buf);
/*
- * File: drivers/spi/bfin5xx_spi.c
- * Based on: N/A
- * Author: Luke Yang (Analog Devices Inc.)
+ * File: drivers/spi/bfin5xx_spi.c
+ * Maintainer:
+ * Bryan Wu <bryan.wu@analog.com>
+ * Original Author:
+ * Luke Yang (Analog Devices Inc.)
*
- * Created: March. 10th 2006
- * Description: SPI controller driver for Blackfin 5xx
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Created: March. 10th 2006
+ * Description: SPI controller driver for Blackfin BF5xx
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Modified:
* March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
* August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
+ * July 17, 2007 add support for BF54x SPI0 controller (Bryan Wu)
+ * July 30, 2007 add platfrom_resource interface to support multi-port
+ * SPI controller (Bryan Wu)
*
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2007 Analog Devices Inc.
*
* This program is free software ; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
#include <asm/dma.h>
-
+#include <asm/portmux.h>
#include <asm/bfin5xx_spi.h>
-MODULE_AUTHOR("Luke Yang");
-MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
-MODULE_LICENSE("GPL");
+#define DRV_NAME "bfin-spi"
+#define DRV_AUTHOR "Bryan Wu, Luke Yang"
+#define DRV_DESC "Blackfin BF5xx on-chip SPI Controller Driver"
+#define DRV_VERSION "1.0"
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
-#define DEFINE_SPI_REG(reg, off) \
-static inline u16 read_##reg(void) \
- { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
-static inline void write_##reg(u16 v) \
- {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
- SSYNC();}
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07) == 0)
-DEFINE_SPI_REG(CTRL, 0x00)
-DEFINE_SPI_REG(FLAG, 0x04)
-DEFINE_SPI_REG(STAT, 0x08)
-DEFINE_SPI_REG(TDBR, 0x0C)
-DEFINE_SPI_REG(RDBR, 0x10)
-DEFINE_SPI_REG(BAUD, 0x14)
-DEFINE_SPI_REG(SHAW, 0x18)
-#define START_STATE ((void*)0)
-#define RUNNING_STATE ((void*)1)
-#define DONE_STATE ((void*)2)
-#define ERROR_STATE ((void*)-1)
-#define QUEUE_RUNNING 0
-#define QUEUE_STOPPED 1
-int dma_requested;
+#define START_STATE ((void *)0)
+#define RUNNING_STATE ((void *)1)
+#define DONE_STATE ((void *)2)
+#define ERROR_STATE ((void *)-1)
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
struct driver_data {
/* Driver model hookup */
/* SPI framework hookup */
struct spi_master *master;
+ /* Regs base of SPI controller */
+ void __iomem *regs_base;
+
+ /* Pin request list */
+ u16 *pin_req;
+
/* BFIN hookup */
struct bfin5xx_spi_master *master_info;
void *tx_end;
void *rx;
void *rx_end;
+
+ /* DMA stuffs */
+ int dma_channel;
int dma_mapped;
+ int dma_requested;
dma_addr_t rx_dma;
dma_addr_t tx_dma;
+
size_t rx_map_len;
size_t tx_map_len;
u8 n_bytes;
+ int cs_change;
void (*write) (struct driver_data *);
void (*read) (struct driver_data *);
void (*duplex) (struct driver_data *);
u8 enable_dma;
u8 bits_per_word; /* 8 or 16 */
u8 cs_change_per_word;
- u8 cs_chg_udelay;
+ u16 cs_chg_udelay; /* Some devices require > 255usec delay */
void (*write) (struct driver_data *);
void (*read) (struct driver_data *);
void (*duplex) (struct driver_data *);
};
+#define DEFINE_SPI_REG(reg, off) \
+static inline u16 read_##reg(struct driver_data *drv_data) \
+ { return bfin_read16(drv_data->regs_base + off); } \
+static inline void write_##reg(struct driver_data *drv_data, u16 v) \
+ { bfin_write16(drv_data->regs_base + off, v); }
+
+DEFINE_SPI_REG(CTRL, 0x00)
+DEFINE_SPI_REG(FLAG, 0x04)
+DEFINE_SPI_REG(STAT, 0x08)
+DEFINE_SPI_REG(TDBR, 0x0C)
+DEFINE_SPI_REG(RDBR, 0x10)
+DEFINE_SPI_REG(BAUD, 0x14)
+DEFINE_SPI_REG(SHAW, 0x18)
+
static void bfin_spi_enable(struct driver_data *drv_data)
{
u16 cr;
- cr = read_CTRL();
- write_CTRL(cr | BIT_CTL_ENABLE);
- SSYNC();
+ cr = read_CTRL(drv_data);
+ write_CTRL(drv_data, (cr | BIT_CTL_ENABLE));
}
static void bfin_spi_disable(struct driver_data *drv_data)
{
u16 cr;
- cr = read_CTRL();
- write_CTRL(cr & (~BIT_CTL_ENABLE));
- SSYNC();
+ cr = read_CTRL(drv_data);
+ write_CTRL(drv_data, (cr & (~BIT_CTL_ENABLE)));
}
/* Caculate the SPI_BAUD register value based on input HZ */
unsigned long limit = loops_per_jiffy << 1;
/* wait for stop and clear stat */
- while (!(read_STAT() & BIT_STAT_SPIF) && limit--)
- continue;
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF) && limit--)
+ cpu_relax();
- write_STAT(BIT_STAT_CLR);
+ write_STAT(drv_data, BIT_STAT_CLR);
return limit;
}
+/* Chip select operation functions for cs_change flag */
+static void cs_active(struct driver_data *drv_data, struct chip_data *chip)
+{
+ u16 flag = read_FLAG(drv_data);
+
+ flag |= chip->flag;
+ flag &= ~(chip->flag << 8);
+
+ write_FLAG(drv_data, flag);
+}
+
+static void cs_deactive(struct driver_data *drv_data, struct chip_data *chip)
+{
+ u16 flag = read_FLAG(drv_data);
+
+ flag |= (chip->flag << 8);
+
+ write_FLAG(drv_data, flag);
+
+ /* Move delay here for consistency */
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+}
+
+#define MAX_SPI_SSEL 7
+
/* stop controller and re-config current chip*/
-static void restore_state(struct driver_data *drv_data)
+static int restore_state(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
+ int ret = 0;
/* Clear status and disable clock */
- write_STAT(BIT_STAT_CLR);
+ write_STAT(drv_data, BIT_STAT_CLR);
bfin_spi_disable(drv_data);
dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
-#if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
- dev_dbg(&drv_data->pdev->dev,
- "chip select number is %d\n", chip->chip_select_num);
-
- switch (chip->chip_select_num) {
- case 1:
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
- SSYNC();
- break;
-
- case 2:
- case 3:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
- SSYNC();
- break;
-
- case 4:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
- SSYNC();
- break;
+ /* Load the registers */
+ write_CTRL(drv_data, chip->ctl_reg);
+ write_BAUD(drv_data, chip->baud);
- case 5:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
- SSYNC();
- break;
+ bfin_spi_enable(drv_data);
+ cs_active(drv_data, chip);
- case 6:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
- SSYNC();
- break;
+ if (ret)
+ dev_dbg(&drv_data->pdev->dev,
+ ": request chip select number %d failed\n",
+ chip->chip_select_num);
- case 7:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
- SSYNC();
- break;
- }
-#endif
-
- /* Load the registers */
- write_CTRL(chip->ctl_reg);
- write_BAUD(chip->baud);
- write_FLAG(chip->flag);
+ return ret;
}
/* used to kick off transfer in rx mode */
-static unsigned short dummy_read(void)
+static unsigned short dummy_read(struct driver_data *drv_data)
{
unsigned short tmp;
- tmp = read_RDBR();
+ tmp = read_RDBR(drv_data);
return tmp;
}
u8 n_bytes = drv_data->n_bytes;
while (drv_data->tx < drv_data->tx_end) {
- write_TDBR(0);
- while ((read_STAT() & BIT_STAT_TXS))
- continue;
+ write_TDBR(drv_data, 0);
+ while ((read_STAT(drv_data) & BIT_STAT_TXS))
+ cpu_relax();
drv_data->tx += n_bytes;
}
}
static void null_reader(struct driver_data *drv_data)
{
u8 n_bytes = drv_data->n_bytes;
- dummy_read();
+ dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- dummy_read();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ dummy_read(drv_data);
drv_data->rx += n_bytes;
}
}
static void u8_writer(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
- "cr8-s is 0x%x\n", read_STAT());
+ dev_dbg(&drv_data->pdev->dev,
+ "cr8-s is 0x%x\n", read_STAT(drv_data));
+
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
while (drv_data->tx < drv_data->tx_end) {
- write_TDBR(*(u8 *) (drv_data->tx));
- while (read_STAT() & BIT_STAT_TXS)
- continue;
+ write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
+ while (read_STAT(drv_data) & BIT_STAT_TXS)
+ cpu_relax();
++drv_data->tx;
}
-
- /* poll for SPI completion before returning */
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
}
static void u8_cs_chg_writer(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
while (drv_data->tx < drv_data->tx_end) {
- write_FLAG(chip->flag);
- SSYNC();
-
- write_TDBR(*(u8 *) (drv_data->tx));
- while (read_STAT() & BIT_STAT_TXS)
- continue;
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- write_FLAG(0xFF00 | chip->flag);
- SSYNC();
- if (chip->cs_chg_udelay)
- udelay(chip->cs_chg_udelay);
+ cs_active(drv_data, chip);
+
+ write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
+ while (read_STAT(drv_data) & BIT_STAT_TXS)
+ cpu_relax();
+
+ cs_deactive(drv_data, chip);
+
++drv_data->tx;
}
- write_FLAG(0xFF00);
- SSYNC();
}
static void u8_reader(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
- "cr-8 is 0x%x\n", read_STAT());
+ dev_dbg(&drv_data->pdev->dev,
+ "cr-8 is 0x%x\n", read_STAT(drv_data));
+
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
/* clear TDBR buffer before read(else it will be shifted out) */
- write_TDBR(0xFFFF);
+ write_TDBR(drv_data, 0xFFFF);
- dummy_read();
+ dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end - 1) {
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u8 *) (drv_data->rx) = read_RDBR();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
++drv_data->rx;
}
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u8 *) (drv_data->rx) = read_SHAW();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u8 *) (drv_data->rx) = read_SHAW(drv_data);
++drv_data->rx;
}
{
struct chip_data *chip = drv_data->cur_chip;
- while (drv_data->rx < drv_data->rx_end) {
- write_FLAG(chip->flag);
- SSYNC();
-
- read_RDBR(); /* kick off */
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- *(u8 *) (drv_data->rx) = read_SHAW();
- write_FLAG(0xFF00 | chip->flag);
- SSYNC();
- if (chip->cs_chg_udelay)
- udelay(chip->cs_chg_udelay);
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
+ /* clear TDBR buffer before read(else it will be shifted out) */
+ write_TDBR(drv_data, 0xFFFF);
+
+ cs_active(drv_data, chip);
+ dummy_read(drv_data);
+
+ while (drv_data->rx < drv_data->rx_end - 1) {
+ cs_deactive(drv_data, chip);
+
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ cs_active(drv_data, chip);
+ *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
++drv_data->rx;
}
- write_FLAG(0xFF00);
- SSYNC();
+ cs_deactive(drv_data, chip);
+
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u8 *) (drv_data->rx) = read_SHAW(drv_data);
+ ++drv_data->rx;
}
static void u8_duplex(struct driver_data *drv_data)
{
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
/* in duplex mode, clk is triggered by writing of TDBR */
while (drv_data->rx < drv_data->rx_end) {
- write_TDBR(*(u8 *) (drv_data->tx));
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u8 *) (drv_data->rx) = read_RDBR();
+ write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
+ while (read_STAT(drv_data) & BIT_STAT_TXS)
+ cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
++drv_data->rx;
++drv_data->tx;
}
{
struct chip_data *chip = drv_data->cur_chip;
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
while (drv_data->rx < drv_data->rx_end) {
- write_FLAG(chip->flag);
- SSYNC();
-
- write_TDBR(*(u8 *) (drv_data->tx));
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u8 *) (drv_data->rx) = read_RDBR();
- write_FLAG(0xFF00 | chip->flag);
- SSYNC();
- if (chip->cs_chg_udelay)
- udelay(chip->cs_chg_udelay);
+ cs_active(drv_data, chip);
+
+ write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
+ while (read_STAT(drv_data) & BIT_STAT_TXS)
+ cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
+
+ cs_deactive(drv_data, chip);
+
++drv_data->rx;
++drv_data->tx;
}
- write_FLAG(0xFF00);
- SSYNC();
}
static void u16_writer(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
- "cr16 is 0x%x\n", read_STAT());
+ dev_dbg(&drv_data->pdev->dev,
+ "cr16 is 0x%x\n", read_STAT(drv_data));
+
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
while (drv_data->tx < drv_data->tx_end) {
- write_TDBR(*(u16 *) (drv_data->tx));
- while ((read_STAT() & BIT_STAT_TXS))
- continue;
+ write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
+ while ((read_STAT(drv_data) & BIT_STAT_TXS))
+ cpu_relax();
drv_data->tx += 2;
}
-
- /* poll for SPI completion before returning */
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
}
static void u16_cs_chg_writer(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
while (drv_data->tx < drv_data->tx_end) {
- write_FLAG(chip->flag);
- SSYNC();
-
- write_TDBR(*(u16 *) (drv_data->tx));
- while ((read_STAT() & BIT_STAT_TXS))
- continue;
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- write_FLAG(0xFF00 | chip->flag);
- SSYNC();
- if (chip->cs_chg_udelay)
- udelay(chip->cs_chg_udelay);
+ cs_active(drv_data, chip);
+
+ write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
+ while ((read_STAT(drv_data) & BIT_STAT_TXS))
+ cpu_relax();
+
+ cs_deactive(drv_data, chip);
+
drv_data->tx += 2;
}
- write_FLAG(0xFF00);
- SSYNC();
}
static void u16_reader(struct driver_data *drv_data)
{
dev_dbg(&drv_data->pdev->dev,
- "cr-16 is 0x%x\n", read_STAT());
- dummy_read();
+ "cr-16 is 0x%x\n", read_STAT(drv_data));
+
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
+ /* clear TDBR buffer before read(else it will be shifted out) */
+ write_TDBR(drv_data, 0xFFFF);
+
+ dummy_read(drv_data);
while (drv_data->rx < (drv_data->rx_end - 2)) {
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u16 *) (drv_data->rx) = read_RDBR();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
drv_data->rx += 2;
}
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u16 *) (drv_data->rx) = read_SHAW();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u16 *) (drv_data->rx) = read_SHAW(drv_data);
drv_data->rx += 2;
}
{
struct chip_data *chip = drv_data->cur_chip;
- while (drv_data->rx < drv_data->rx_end) {
- write_FLAG(chip->flag);
- SSYNC();
-
- read_RDBR(); /* kick off */
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- *(u16 *) (drv_data->rx) = read_SHAW();
- write_FLAG(0xFF00 | chip->flag);
- SSYNC();
- if (chip->cs_chg_udelay)
- udelay(chip->cs_chg_udelay);
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
+ /* clear TDBR buffer before read(else it will be shifted out) */
+ write_TDBR(drv_data, 0xFFFF);
+
+ cs_active(drv_data, chip);
+ dummy_read(drv_data);
+
+ while (drv_data->rx < drv_data->rx_end - 2) {
+ cs_deactive(drv_data, chip);
+
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ cs_active(drv_data, chip);
+ *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
drv_data->rx += 2;
}
- write_FLAG(0xFF00);
- SSYNC();
+ cs_deactive(drv_data, chip);
+
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u16 *) (drv_data->rx) = read_SHAW(drv_data);
+ drv_data->rx += 2;
}
static void u16_duplex(struct driver_data *drv_data)
{
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
/* in duplex mode, clk is triggered by writing of TDBR */
while (drv_data->tx < drv_data->tx_end) {
- write_TDBR(*(u16 *) (drv_data->tx));
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u16 *) (drv_data->rx) = read_RDBR();
+ write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
+ while (read_STAT(drv_data) & BIT_STAT_TXS)
+ cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
drv_data->rx += 2;
drv_data->tx += 2;
}
{
struct chip_data *chip = drv_data->cur_chip;
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
+
while (drv_data->tx < drv_data->tx_end) {
- write_FLAG(chip->flag);
- SSYNC();
-
- write_TDBR(*(u16 *) (drv_data->tx));
- while (!(read_STAT() & BIT_STAT_SPIF))
- continue;
- while (!(read_STAT() & BIT_STAT_RXS))
- continue;
- *(u16 *) (drv_data->rx) = read_RDBR();
- write_FLAG(0xFF00 | chip->flag);
- SSYNC();
- if (chip->cs_chg_udelay)
- udelay(chip->cs_chg_udelay);
+ cs_active(drv_data, chip);
+
+ write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
+ while (read_STAT(drv_data) & BIT_STAT_TXS)
+ cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
+
+ cs_deactive(drv_data, chip);
+
drv_data->rx += 2;
drv_data->tx += 2;
}
- write_FLAG(0xFF00);
- SSYNC();
}
/* test if ther is more transfer to be done */
*/
static void giveback(struct driver_data *drv_data)
{
+ struct chip_data *chip = drv_data->cur_chip;
struct spi_transfer *last_transfer;
unsigned long flags;
struct spi_message *msg;
/* disable chip select signal. And not stop spi in autobuffer mode */
if (drv_data->tx_dma != 0xFFFF) {
- write_FLAG(0xFF00);
+ cs_deactive(drv_data, chip);
bfin_spi_disable(drv_data);
}
+ if (!drv_data->cs_change)
+ cs_deactive(drv_data, chip);
+
if (msg->complete)
msg->complete(msg->context);
}
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
struct driver_data *drv_data = (struct driver_data *)dev_id;
+ struct chip_data *chip = drv_data->cur_chip;
struct spi_message *msg = drv_data->cur_msg;
dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler\n");
- clear_dma_irqstat(CH_SPI);
+ clear_dma_irqstat(drv_data->dma_channel);
/* Wait for DMA to complete */
- while (get_dma_curr_irqstat(CH_SPI) & DMA_RUN)
- continue;
+ while (get_dma_curr_irqstat(drv_data->dma_channel) & DMA_RUN)
+ cpu_relax();
/*
* wait for the last transaction shifted out. HRM states:
* register until it goes low for 2 successive reads
*/
if (drv_data->tx != NULL) {
- while ((bfin_read_SPI_STAT() & TXS) ||
- (bfin_read_SPI_STAT() & TXS))
- continue;
+ while ((read_STAT(drv_data) & TXS) ||
+ (read_STAT(drv_data) & TXS))
+ cpu_relax();
}
- while (!(bfin_read_SPI_STAT() & SPIF))
- continue;
-
- bfin_spi_disable(drv_data);
+ while (!(read_STAT(drv_data) & SPIF))
+ cpu_relax();
msg->actual_length += drv_data->len_in_bytes;
+ if (drv_data->cs_change)
+ cs_deactive(drv_data, chip);
+
/* Move to next transfer */
msg->state = next_transfer(drv_data);
/* free the irq handler before next transfer */
dev_dbg(&drv_data->pdev->dev,
"disable dma channel irq%d\n",
- CH_SPI);
- dma_disable_irq(CH_SPI);
+ drv_data->dma_channel);
+ dma_disable_irq(drv_data->dma_channel);
return IRQ_HANDLED;
}
drv_data->rx_dma = transfer->rx_dma;
drv_data->tx_dma = transfer->tx_dma;
drv_data->len_in_bytes = transfer->len;
+ drv_data->cs_change = transfer->cs_change;
+
+ /* Bits per word setup */
+ switch (transfer->bits_per_word) {
+ case 8:
+ drv_data->n_bytes = 1;
+ width = CFG_SPI_WORDSIZE8;
+ drv_data->read = chip->cs_change_per_word ?
+ u8_cs_chg_reader : u8_reader;
+ drv_data->write = chip->cs_change_per_word ?
+ u8_cs_chg_writer : u8_writer;
+ drv_data->duplex = chip->cs_change_per_word ?
+ u8_cs_chg_duplex : u8_duplex;
+ break;
+
+ case 16:
+ drv_data->n_bytes = 2;
+ width = CFG_SPI_WORDSIZE16;
+ drv_data->read = chip->cs_change_per_word ?
+ u16_cs_chg_reader : u16_reader;
+ drv_data->write = chip->cs_change_per_word ?
+ u16_cs_chg_writer : u16_writer;
+ drv_data->duplex = chip->cs_change_per_word ?
+ u16_cs_chg_duplex : u16_duplex;
+ break;
+
+ default:
+ /* No change, the same as default setting */
+ drv_data->n_bytes = chip->n_bytes;
+ width = chip->width;
+ drv_data->write = drv_data->tx ? chip->write : null_writer;
+ drv_data->read = drv_data->rx ? chip->read : null_reader;
+ drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
+ break;
+ }
+ cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
+ cr |= (width << 8);
+ write_CTRL(drv_data, cr);
- width = chip->width;
if (width == CFG_SPI_WORDSIZE16) {
drv_data->len = (transfer->len) >> 1;
} else {
drv_data->len = transfer->len;
}
- drv_data->write = drv_data->tx ? chip->write : null_writer;
- drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
- dev_dbg(&drv_data->pdev->dev,
- "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
- drv_data->write, chip->write, null_writer);
+ dev_dbg(&drv_data->pdev->dev, "transfer: ",
+ "drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ drv_data->write, chip->write, null_writer);
/* speed and width has been set on per message */
message->state = RUNNING_STATE;
dma_config = 0;
- /* restore spi status for each spi transfer */
- if (transfer->speed_hz) {
- write_BAUD(hz_to_spi_baud(transfer->speed_hz));
- } else {
- write_BAUD(chip->baud);
- }
- write_FLAG(chip->flag);
+ /* Speed setup (surely valid because already checked) */
+ if (transfer->speed_hz)
+ write_BAUD(drv_data, hz_to_spi_baud(transfer->speed_hz));
+ else
+ write_BAUD(drv_data, chip->baud);
+
+ write_STAT(drv_data, BIT_STAT_CLR);
+ cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
+ cs_active(drv_data, chip);
dev_dbg(&drv_data->pdev->dev,
"now pumping a transfer: width is %d, len is %d\n",
*/
if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
- write_STAT(BIT_STAT_CLR);
- disable_dma(CH_SPI);
- clear_dma_irqstat(CH_SPI);
+ disable_dma(drv_data->dma_channel);
+ clear_dma_irqstat(drv_data->dma_channel);
bfin_spi_disable(drv_data);
/* config dma channel */
dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
if (width == CFG_SPI_WORDSIZE16) {
- set_dma_x_count(CH_SPI, drv_data->len);
- set_dma_x_modify(CH_SPI, 2);
+ set_dma_x_count(drv_data->dma_channel, drv_data->len);
+ set_dma_x_modify(drv_data->dma_channel, 2);
dma_width = WDSIZE_16;
} else {
- set_dma_x_count(CH_SPI, drv_data->len);
- set_dma_x_modify(CH_SPI, 1);
+ set_dma_x_count(drv_data->dma_channel, drv_data->len);
+ set_dma_x_modify(drv_data->dma_channel, 1);
dma_width = WDSIZE_8;
}
- /* set transfer width,direction. And enable spi */
- cr = (read_CTRL() & (~BIT_CTL_TIMOD));
+ /* poll for SPI completion before start */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
/* dirty hack for autobuffer DMA mode */
if (drv_data->tx_dma == 0xFFFF) {
/* no irq in autobuffer mode */
dma_config =
(DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
- set_dma_config(CH_SPI, dma_config);
- set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
- enable_dma(CH_SPI);
- write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
- (CFG_SPI_ENABLE << 14));
-
- /* just return here, there can only be one transfer in this mode */
+ set_dma_config(drv_data->dma_channel, dma_config);
+ set_dma_start_addr(drv_data->dma_channel,
+ (unsigned long)drv_data->tx);
+ enable_dma(drv_data->dma_channel);
+
+ /* start SPI transfer */
+ write_CTRL(drv_data,
+ (cr | CFG_SPI_DMAWRITE | BIT_CTL_ENABLE));
+
+ /* just return here, there can only be one transfer
+ * in this mode
+ */
message->status = 0;
giveback(drv_data);
return;
/* set transfer mode, and enable SPI */
dev_dbg(&drv_data->pdev->dev, "doing DMA in.\n");
- /* disable SPI before write to TDBR */
- write_CTRL(cr & ~BIT_CTL_ENABLE);
-
/* clear tx reg soformer data is not shifted out */
- write_TDBR(0xFF);
+ write_TDBR(drv_data, 0xFFFF);
- set_dma_x_count(CH_SPI, drv_data->len);
+ set_dma_x_count(drv_data->dma_channel, drv_data->len);
/* start dma */
- dma_enable_irq(CH_SPI);
+ dma_enable_irq(drv_data->dma_channel);
dma_config = (WNR | RESTART | dma_width | DI_EN);
- set_dma_config(CH_SPI, dma_config);
- set_dma_start_addr(CH_SPI, (unsigned long)drv_data->rx);
- enable_dma(CH_SPI);
+ set_dma_config(drv_data->dma_channel, dma_config);
+ set_dma_start_addr(drv_data->dma_channel,
+ (unsigned long)drv_data->rx);
+ enable_dma(drv_data->dma_channel);
+
+ /* start SPI transfer */
+ write_CTRL(drv_data,
+ (cr | CFG_SPI_DMAREAD | BIT_CTL_ENABLE));
- cr |=
- CFG_SPI_DMAREAD | (width << 8) | (CFG_SPI_ENABLE <<
- 14);
- /* set transfer mode, and enable SPI */
- write_CTRL(cr);
} else if (drv_data->tx != NULL) {
dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
/* start dma */
- dma_enable_irq(CH_SPI);
+ dma_enable_irq(drv_data->dma_channel);
dma_config = (RESTART | dma_width | DI_EN);
- set_dma_config(CH_SPI, dma_config);
- set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
- enable_dma(CH_SPI);
-
- write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
- (CFG_SPI_ENABLE << 14));
-
+ set_dma_config(drv_data->dma_channel, dma_config);
+ set_dma_start_addr(drv_data->dma_channel,
+ (unsigned long)drv_data->tx);
+ enable_dma(drv_data->dma_channel);
+
+ /* start SPI transfer */
+ write_CTRL(drv_data,
+ (cr | CFG_SPI_DMAWRITE | BIT_CTL_ENABLE));
}
} else {
/* IO mode write then read */
dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
- write_STAT(BIT_STAT_CLR);
-
if (drv_data->tx != NULL && drv_data->rx != NULL) {
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=
(drv_data->rx_end - drv_data->rx));
- cr = (read_CTRL() & (~BIT_CTL_TIMOD));
- cr |= CFG_SPI_WRITE | (width << 8) |
- (CFG_SPI_ENABLE << 14);
dev_dbg(&drv_data->pdev->dev,
"IO duplex: cr is 0x%x\n", cr);
- write_CTRL(cr);
- SSYNC();
+ /* set SPI transfer mode */
+ write_CTRL(drv_data, (cr | CFG_SPI_WRITE));
drv_data->duplex(drv_data);
tranf_success = 0;
} else if (drv_data->tx != NULL) {
/* write only half duplex */
- cr = (read_CTRL() & (~BIT_CTL_TIMOD));
- cr |= CFG_SPI_WRITE | (width << 8) |
- (CFG_SPI_ENABLE << 14);
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO write: cr is 0x%x\n", cr);
- write_CTRL(cr);
- SSYNC();
+ /* set SPI transfer mode */
+ write_CTRL(drv_data, (cr | CFG_SPI_WRITE));
drv_data->write(drv_data);
tranf_success = 0;
} else if (drv_data->rx != NULL) {
/* read only half duplex */
- cr = (read_CTRL() & (~BIT_CTL_TIMOD));
- cr |= CFG_SPI_READ | (width << 8) |
- (CFG_SPI_ENABLE << 14);
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO read: cr is 0x%x\n", cr);
- write_CTRL(cr);
- SSYNC();
+ /* set SPI transfer mode */
+ write_CTRL(drv_data, (cr | CFG_SPI_READ));
drv_data->read(drv_data);
if (drv_data->rx != drv_data->rx_end)
}
if (!tranf_success) {
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO write error!\n");
message->state = ERROR_STATE;
} else {
/* pop a msg from queue and kick off real transfer */
static void pump_messages(struct work_struct *work)
{
- struct driver_data *drv_data = container_of(work, struct driver_data, pump_messages);
+ struct driver_data *drv_data;
unsigned long flags;
+ drv_data = container_of(work, struct driver_data, pump_messages);
+
/* Lock queue and check for queue work */
spin_lock_irqsave(&drv_data->lock, flags);
if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
/* Extract head of queue */
drv_data->cur_msg = list_entry(drv_data->queue.next,
struct spi_message, queue);
+
+ /* Setup the SSP using the per chip configuration */
+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+ if (restore_state(drv_data)) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ };
+
list_del_init(&drv_data->cur_msg->queue);
/* Initial message state */
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
struct spi_transfer, transfer_list);
- /* Setup the SSP using the per chip configuration */
- drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- restore_state(drv_data);
+ dev_dbg(&drv_data->pdev->dev, "got a message to pump, "
+ "state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+ drv_data->cur_chip->baud, drv_data->cur_chip->flag,
+ drv_data->cur_chip->ctl_reg);
+
dev_dbg(&drv_data->pdev->dev,
- "got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
- drv_data->cur_chip->baud, drv_data->cur_chip->flag,
- drv_data->cur_chip->ctl_reg);
-
- dev_dbg(&drv_data->pdev->dev,
"the first transfer len is %d\n",
drv_data->cur_transfer->len);
return 0;
}
+#define MAX_SPI_SSEL 7
+
+static u16 ssel[3][MAX_SPI_SSEL] = {
+ {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+ P_SPI0_SSEL4, P_SPI0_SSEL5,
+ P_SPI0_SSEL6, P_SPI0_SSEL7},
+
+ {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
+ P_SPI1_SSEL4, P_SPI1_SSEL5,
+ P_SPI1_SSEL6, P_SPI1_SSEL7},
+
+ {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
+ P_SPI2_SSEL4, P_SPI2_SSEL5,
+ P_SPI2_SSEL6, P_SPI2_SSEL7},
+};
+
/* first setup for new devices */
static int setup(struct spi_device *spi)
{
/* chip_info isn't always needed */
if (chip_info) {
+ /* Make sure people stop trying to set fields via ctl_reg
+ * when they should actually be using common SPI framework.
+ * Currently we let through: WOM EMISO PSSE GM SZ TIMOD.
+ * Not sure if a user actually needs/uses any of these,
+ * but let's assume (for now) they do.
+ */
+ if (chip_info->ctl_reg & (SPE|MSTR|CPOL|CPHA|LSBF|SIZE)) {
+ dev_err(&spi->dev, "do not set bits in ctl_reg "
+ "that the SPI framework manages\n");
+ return -EINVAL;
+ }
+
chip->enable_dma = chip_info->enable_dma != 0
&& drv_data->master_info->enable_dma;
chip->ctl_reg = chip_info->ctl_reg;
* if any one SPI chip is registered and wants DMA, request the
* DMA channel for it
*/
- if (chip->enable_dma && !dma_requested) {
+ if (chip->enable_dma && !drv_data->dma_requested) {
/* register dma irq handler */
- if (request_dma(CH_SPI, "BF53x_SPI_DMA") < 0) {
+ if (request_dma(drv_data->dma_channel, "BF53x_SPI_DMA") < 0) {
dev_dbg(&spi->dev,
"Unable to request BlackFin SPI DMA channel\n");
return -ENODEV;
}
- if (set_dma_callback(CH_SPI, (void *)dma_irq_handler, drv_data)
- < 0) {
+ if (set_dma_callback(drv_data->dma_channel,
+ (void *)dma_irq_handler, drv_data) < 0) {
dev_dbg(&spi->dev, "Unable to set dma callback\n");
return -EPERM;
}
- dma_disable_irq(CH_SPI);
- dma_requested = 1;
+ dma_disable_irq(drv_data->dma_channel);
+ drv_data->dma_requested = 1;
}
/*
spi_set_ctldata(spi, chip);
+ dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num);
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_request(ssel[spi->master->bus_num]
+ [chip->chip_select_num-1], DRV_NAME);
+
+ cs_deactive(drv_data, chip);
+
return 0;
}
{
struct chip_data *chip = spi_get_ctldata(spi);
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_free(ssel[spi->master->bus_num]
+ [chip->chip_select_num-1]);
+
kfree(chip);
}
struct bfin5xx_spi_master *platform_info;
struct spi_master *master;
struct driver_data *drv_data = 0;
+ struct resource *res;
int status = 0;
platform_info = dev->platform_data;
dev_err(&pdev->dev, "can not alloc spi_master\n");
return -ENOMEM;
}
+
drv_data = spi_master_get_devdata(master);
drv_data->master = master;
drv_data->master_info = platform_info;
drv_data->pdev = pdev;
+ drv_data->pin_req = platform_info->pin_req;
master->bus_num = pdev->id;
master->num_chipselect = platform_info->num_chipselect;
master->setup = setup;
master->transfer = transfer;
+ /* Find and map our resources */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(dev, "Cannot get IORESOURCE_MEM\n");
+ status = -ENOENT;
+ goto out_error_get_res;
+ }
+
+ drv_data->regs_base = ioremap(res->start, (res->end - res->start + 1));
+ if (drv_data->regs_base == NULL) {
+ dev_err(dev, "Cannot map IO\n");
+ status = -ENXIO;
+ goto out_error_ioremap;
+ }
+
+ drv_data->dma_channel = platform_get_irq(pdev, 0);
+ if (drv_data->dma_channel < 0) {
+ dev_err(dev, "No DMA channel specified\n");
+ status = -ENOENT;
+ goto out_error_no_dma_ch;
+ }
+
/* Initial and start queue */
status = init_queue(drv_data);
if (status != 0) {
- dev_err(&pdev->dev, "problem initializing queue\n");
+ dev_err(dev, "problem initializing queue\n");
goto out_error_queue_alloc;
}
+
status = start_queue(drv_data);
if (status != 0) {
- dev_err(&pdev->dev, "problem starting queue\n");
+ dev_err(dev, "problem starting queue\n");
goto out_error_queue_alloc;
}
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
if (status != 0) {
- dev_err(&pdev->dev, "problem registering spi master\n");
+ dev_err(dev, "problem registering spi master\n");
goto out_error_queue_alloc;
}
- dev_dbg(&pdev->dev, "controller probe successfully\n");
+
+ status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+ if (status != 0) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error;
+ }
+
+ dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n",
+ DRV_DESC, DRV_VERSION, drv_data->regs_base,
+ drv_data->dma_channel);
return status;
- out_error_queue_alloc:
+out_error_queue_alloc:
destroy_queue(drv_data);
+out_error_no_dma_ch:
+ iounmap((void *) drv_data->regs_base);
+out_error_ioremap:
+out_error_get_res:
+out_error:
spi_master_put(master);
+
return status;
}
/* Release DMA */
if (drv_data->master_info->enable_dma) {
- if (dma_channel_active(CH_SPI))
- free_dma(CH_SPI);
+ if (dma_channel_active(drv_data->dma_channel))
+ free_dma(drv_data->dma_channel);
}
/* Disconnect from the SPI framework */
spi_unregister_master(drv_data->master);
+ peripheral_free_list(drv_data->pin_req);
+
/* Prevent double remove */
platform_set_drvdata(pdev, NULL);
MODULE_ALIAS("bfin-spi-master"); /* for platform bus hotplug */
static struct platform_driver bfin5xx_spi_driver = {
.driver = {
- .name = "bfin-spi-master",
+ .name = DRV_NAME,
.owner = THIS_MODULE,
},
.suspend = bfin5xx_spi_suspend,
module_exit(spi_imx_exit);
MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
-MODULE_DESCRIPTION("iMX SPI Contoller Driver");
+MODULE_DESCRIPTION("iMX SPI Controller Driver");
MODULE_LICENSE("GPL");
static int s3c2410_spigpio_probe(struct platform_device *dev)
{
+ struct s3c2410_spigpio_info *info;
struct spi_master *master;
struct s3c2410_spigpio *sp;
int ret;
platform_set_drvdata(dev, sp);
/* copy in the plkatform data */
- sp->info = dev->dev.platform_data;
+ info = sp->info = dev->dev.platform_data;
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master->bus_num = info->bus_num;
sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2;
sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3;
- /* set state of spi pins */
- s3c2410_gpio_setpin(sp->info->pin_clk, 0);
- s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+ /* set state of spi pins, always assume that the clock is
+ * available, but do check the MOSI and MISO. */
+ s3c2410_gpio_setpin(info->pin_clk, 0);
+ s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+ if (info->pin_mosi < S3C2410_GPH10) {
+ s3c2410_gpio_setpin(info->pin_mosi, 0);
+ s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT);
+ }
+
+ if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10)
+ s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT);
ret = spi_bitbang_start(&sp->bitbang);
if (ret)
image/ - This is for still image drivers, like scanners or
digital cameras.
-input/ - This is for any driver that uses the input subsystem,
+../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
-media/ - This is for multimedia drivers, like video cameras,
+../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
-net/ - This is for network drivers.
+../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
{
struct usb_device *usb_dev;
- if (!dev)
- return -ENODEV;
-
/* driver is often null here; dev_dbg() would oops */
pr_debug ("usb %s: uevent\n", dev->bus_id);
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (add_uevent_var(env, "BUSNUM=%03d",
- usb_dev->bus->busnum))
- return -ENOMEM;
-
- if (add_uevent_var(env, "DEVNUM=%03d",
- usb_dev->devnum))
- return -ENOMEM;
-
return 0;
}
hcd = bus_to_hcd(udev->bus);
/* No more submits can occur */
-rescan:
spin_lock_irq(&hcd_urb_list_lock);
+rescan:
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int is_in;
usb_put_urb (urb);
/* list contents may have changed */
+ spin_lock(&hcd_urb_list_lock);
goto rescan;
}
spin_unlock_irq(&hcd_urb_list_lock);
to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
spin_lock_irqsave(&hub_event_lock, flags);
- if (!hub->disconnected & list_empty(&hub->event_list)) {
+ if (!hub->disconnected && list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
wake_up(&khubd_wait);
}
struct usb_host_interface *alt;
int ret;
int manual = 0;
- int changed;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
*/
/* prevent submissions using previous endpoint settings */
- changed = (iface->cur_altsetting != alt);
- if (changed && device_is_registered(&iface->dev))
+ if (iface->cur_altsetting != alt && device_is_registered(&iface->dev))
usb_remove_sysfs_intf_files(iface);
usb_disable_interface(dev, iface);
* (Likewise, EP0 never "halts" on well designed devices.)
*/
usb_enable_interface(dev, iface);
- if (changed && device_is_registered(&iface->dev))
+ if (device_is_registered(&iface->dev))
usb_create_sysfs_intf_files(iface);
return 0;
struct usb_interface *intf;
struct usb_host_interface *alt;
- if (!dev)
- return -ENODEV;
-
- /* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
-
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
alt = intf->cur_altsetting;
-#ifdef CONFIG_USB_DEVICEFS
- if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
- usb_dev->bus->busnum, usb_dev->devnum))
- return -ENOMEM;
-#endif
-
- if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice)))
- return -ENOMEM;
-
- if (add_uevent_var(env, "TYPE=%d/%d/%d",
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
-
if (add_uevent_var(env, "INTERFACE=%d/%d/%d",
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
intf->dev.bus_id, ret);
continue;
}
-
- /* The driver's probe method can call usb_set_interface(),
- * which would mean the interface's sysfs files are already
- * created. Just in case, we'll remove them first.
- */
- usb_remove_sysfs_intf_files(intf);
usb_create_sysfs_intf_files(intf);
}
struct usb_host_interface *alt = intf->cur_altsetting;
int retval;
+ if (intf->sysfs_files_created)
+ return 0;
retval = sysfs_create_group(&dev->kobj, &intf_attr_grp);
if (retval)
return retval;
if (intf->intf_assoc)
retval = sysfs_create_group(&dev->kobj, &intf_assoc_attr_grp);
usb_create_intf_ep_files(intf, udev);
+ intf->sysfs_files_created = 1;
return 0;
}
{
struct device *dev = &intf->dev;
+ if (!intf->sysfs_files_created)
+ return;
usb_remove_intf_ep_files(intf);
device_remove_file(dev, &dev_attr_interface);
sysfs_remove_group(&dev->kobj, &intf_attr_grp);
sysfs_remove_group(&intf->dev.kobj, &intf_assoc_attr_grp);
+ intf->sysfs_files_created = 0;
}
kfree(udev);
}
+#ifdef CONFIG_HOTPLUG
+static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct usb_device *usb_dev;
+
+ usb_dev = to_usb_device(dev);
+
+ if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum))
+ return -ENOMEM;
+
+ return 0;
+}
+
+#else
+
+static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_HOTPLUG */
+
struct device_type usb_device_type = {
.name = "usb_device",
.release = usb_release_dev,
+ .uevent = usb_dev_uevent,
};
#ifdef CONFIG_PM
udc->gadget.dev.parent->power.power_state = PMSG_ON;
udc->gadget.dev.power.power_state = PMSG_ON;
UDC_SYSCON1_REG |= UDC_PULLUP_EN;
- if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
+ if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG |= OTG_BSESSVLD;
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
}
static void pullup_disable(struct omap_udc *udc)
{
- if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
+ if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG &= ~OTG_BSESSVLD;
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
{
u16 devstat;
- if (!gadget_is_otg(udc->gadget))
+ if (!gadget_is_otg(&udc->gadget))
return;
if (OTG_CTRL_REG & OTG_ID)
#include <asm/arch/irqs.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-udc.h>
-#include <asm/arch/udc.h>
+
+#include <asm/plat-s3c24xx/regs-udc.h>
+#include <asm/plat-s3c24xx/udc.h>
#include <asm/mach-types.h>
unsigned int value;
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+
+ /* some cpus cannot read from an line configured to IRQ! */
+ s3c2410_gpio_cfgpin(udc_info->vbus_pin, S3C2410_GPIO_INPUT);
value = s3c2410_gpio_getpin(udc_info->vbus_pin);
+ s3c2410_gpio_cfgpin(udc_info->vbus_pin, S3C2410_GPIO_SFN2);
if (udc_info->vbus_pin_inverted)
value = !value;
if (udc_info && udc_info->vbus_pin > 0) {
irq = s3c2410_gpio_getirq(udc_info->vbus_pin);
retval = request_irq(irq, s3c2410_udc_vbus_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING
- | IRQF_TRIGGER_FALLING,
- gadget_name, udc);
+ IRQF_DISABLED | IRQF_TRIGGER_RISING
+ | IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ gadget_name, udc);
if (retval != 0) {
dev_err(dev, "can't get vbus irq %i, err %d\n",
config USB_OHCI_HCD_SSB
bool "OHCI support for Broadcom SSB OHCI core"
- depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL
+ depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
default n
---help---
Support for the Sonics Silicon Backplane (SSB) attached
* from the companions to the EHCI controller. If any of the
* companions are in the middle of a port reset at the time, it
* could cause trouble. Write-locking ehci_cf_port_reset_rwsem
- * guarantees that no resets are in progress.
+ * guarantees that no resets are in progress. After we set CF,
+ * a short delay lets the hardware catch up; new resets shouldn't
+ * be started before the port switching actions could complete.
*/
down_write(&ehci_cf_port_reset_rwsem);
hcd->state = HC_STATE_RUNNING;
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+ msleep(5);
up_write(&ehci_cf_port_reset_rwsem);
temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
goto out_kfree2;
new_desc->host->hostdata[0] = (unsigned long)new_desc;
- if (scsi_add_host(new_desc->host, NULL)) {
+ if (scsi_add_host(new_desc->host, &dev->dev)) {
err_retval = -EIO;
goto out_host_put;
}
#define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */
+/*
+ * The locking scheme is a vanilla 3-lock:
+ * adu_device.buflock: A spinlock, covers what IRQs touch.
+ * adutux_mutex: A Static lock to cover open_count. It would also cover
+ * any globals, but we don't have them in 2.6.
+ * adu_device.mtx: A mutex to hold across sleepers like copy_from_user.
+ * It covers all of adu_device, except the open_count
+ * and what .buflock covers.
+ */
+
/* Structure to hold all of our device specific stuff */
struct adu_device {
- struct mutex mtx; /* locks this structure */
+ struct mutex mtx;
struct usb_device* udev; /* save off the usb device pointer */
struct usb_interface* interface;
- unsigned char minor; /* the starting minor number for this device */
+ unsigned int minor; /* the starting minor number for this device */
char serial_number[8];
int open_count; /* number of times this port has been opened */
char* interrupt_out_buffer;
struct usb_endpoint_descriptor* interrupt_out_endpoint;
struct urb* interrupt_out_urb;
+ int out_urb_finished;
};
+static DEFINE_MUTEX(adutux_mutex);
+
static struct usb_driver adu_driver;
static void adu_debug_data(int level, const char *function, int size,
*/
static void adu_abort_transfers(struct adu_device *dev)
{
- dbg(2," %s : enter", __FUNCTION__);
+ unsigned long flags;
- if (dev == NULL) {
- dbg(1," %s : dev is null", __FUNCTION__);
- goto exit;
- }
+ dbg(2," %s : enter", __FUNCTION__);
if (dev->udev == NULL) {
dbg(1," %s : udev is null", __FUNCTION__);
goto exit;
}
- dbg(2," %s : udev state %d", __FUNCTION__, dev->udev->state);
- if (dev->udev->state == USB_STATE_NOTATTACHED) {
- dbg(1," %s : udev is not attached", __FUNCTION__);
- goto exit;
- }
-
/* shutdown transfer */
- usb_unlink_urb(dev->interrupt_in_urb);
- usb_unlink_urb(dev->interrupt_out_urb);
+
+ /* XXX Anchor these instead */
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->read_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ usb_kill_urb(dev->interrupt_in_urb);
+ } else
+ spin_unlock_irqrestore(&dev->buflock, flags);
+
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->out_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ usb_kill_urb(dev->interrupt_out_urb);
+ } else
+ spin_unlock_irqrestore(&dev->buflock, flags);
exit:
dbg(2," %s : leave", __FUNCTION__);
{
dbg(2, "%s enter", __FUNCTION__);
- adu_abort_transfers(dev);
-
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
usb_free_urb(dev->interrupt_out_urb);
goto exit;
}
- wake_up_interruptible(&dev->write_wait);
+ spin_lock(&dev->buflock);
+ dev->out_urb_finished = 1;
+ wake_up(&dev->write_wait);
+ spin_unlock(&dev->buflock);
exit:
adu_debug_data(5, __FUNCTION__, urb->actual_length,
struct adu_device *dev = NULL;
struct usb_interface *interface;
int subminor;
- int retval = 0;
+ int retval;
dbg(2,"%s : enter", __FUNCTION__);
subminor = iminor(inode);
+ if ((retval = mutex_lock_interruptible(&adutux_mutex))) {
+ dbg(2, "%s : mutex lock failed", __FUNCTION__);
+ goto exit_no_lock;
+ }
+
interface = usb_find_interface(&adu_driver, subminor);
if (!interface) {
err("%s - error, can't find device for minor %d",
}
dev = usb_get_intfdata(interface);
- if (!dev) {
+ if (!dev || !dev->udev) {
retval = -ENODEV;
goto exit_no_device;
}
- /* lock this device */
- if ((retval = mutex_lock_interruptible(&dev->mtx))) {
- dbg(2, "%s : mutex lock failed", __FUNCTION__);
+ /* check that nobody else is using the device */
+ if (dev->open_count) {
+ retval = -EBUSY;
goto exit_no_device;
}
- /* increment our usage count for the device */
++dev->open_count;
dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count);
/* save device in the file's private structure */
file->private_data = dev;
- if (dev->open_count == 1) {
- /* initialize in direction */
- dev->read_buffer_length = 0;
+ /* initialize in direction */
+ dev->read_buffer_length = 0;
- /* fixup first read by having urb waiting for it */
- usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
- usb_rcvintpipe(dev->udev,
- dev->interrupt_in_endpoint->bEndpointAddress),
- dev->interrupt_in_buffer,
- le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
- adu_interrupt_in_callback, dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
- dev->read_urb_finished = 0;
- retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
- if (retval)
- --dev->open_count;
- }
- mutex_unlock(&dev->mtx);
+ /* fixup first read by having urb waiting for it */
+ usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback, dev,
+ dev->interrupt_in_endpoint->bInterval);
+ dev->read_urb_finished = 0;
+ if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL))
+ dev->read_urb_finished = 1;
+ /* we ignore failure */
+ /* end of fixup for first read */
+
+ /* initialize out direction */
+ dev->out_urb_finished = 1;
+
+ retval = 0;
exit_no_device:
+ mutex_unlock(&adutux_mutex);
+exit_no_lock:
dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval);
-
return retval;
}
-static int adu_release_internal(struct adu_device *dev)
+static void adu_release_internal(struct adu_device *dev)
{
- int retval = 0;
-
dbg(2," %s : enter", __FUNCTION__);
/* decrement our usage count for the device */
}
dbg(2," %s : leave", __FUNCTION__);
- return retval;
}
static int adu_release(struct inode *inode, struct file *file)
{
- struct adu_device *dev = NULL;
+ struct adu_device *dev;
int retval = 0;
dbg(2," %s : enter", __FUNCTION__);
}
dev = file->private_data;
-
if (dev == NULL) {
dbg(1," %s : object is NULL", __FUNCTION__);
retval = -ENODEV;
goto exit;
}
- /* lock our device */
- mutex_lock(&dev->mtx); /* not interruptible */
+ mutex_lock(&adutux_mutex); /* not interruptible */
if (dev->open_count <= 0) {
dbg(1," %s : device not opened", __FUNCTION__);
goto exit;
}
+ adu_release_internal(dev);
if (dev->udev == NULL) {
/* the device was unplugged before the file was released */
- mutex_unlock(&dev->mtx);
- adu_delete(dev);
- dev = NULL;
- } else {
- /* do the work */
- retval = adu_release_internal(dev);
+ if (!dev->open_count) /* ... and we're the last user */
+ adu_delete(dev);
}
exit:
- if (dev)
- mutex_unlock(&dev->mtx);
+ mutex_unlock(&adutux_mutex);
dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
return retval;
}
dev = file->private_data;
dbg(2," %s : dev=%p", __FUNCTION__, dev);
- /* lock this object */
+
if (mutex_lock_interruptible(&dev->mtx))
return -ERESTARTSYS;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL || dev->minor == 0) {
+ if (dev->udev == NULL) {
retval = -ENODEV;
err("No device or device unplugged %d", retval);
goto exit;
should_submit = 1;
} else {
/* even the primary was empty - we may need to do IO */
- if (dev->interrupt_in_urb->status == -EINPROGRESS) {
+ if (!dev->read_urb_finished) {
/* somebody is doing IO */
spin_unlock_irqrestore(&dev->buflock, flags);
dbg(2," %s : submitted already", __FUNCTION__);
/* we must initiate input */
dbg(2," %s : initiate input", __FUNCTION__);
dev->read_urb_finished = 0;
+ spin_unlock_irqrestore(&dev->buflock, flags);
usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
usb_rcvintpipe(dev->udev,
adu_interrupt_in_callback,
dev,
dev->interrupt_in_endpoint->bInterval);
- retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
- if (!retval) {
- spin_unlock_irqrestore(&dev->buflock, flags);
- dbg(2," %s : submitted OK", __FUNCTION__);
- } else {
+ retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ if (retval) {
+ dev->read_urb_finished = 1;
if (retval == -ENOMEM) {
retval = bytes_read ? bytes_read : -ENOMEM;
}
- spin_unlock_irqrestore(&dev->buflock, flags);
dbg(2," %s : submit failed", __FUNCTION__);
goto exit;
}
/* we wait for I/O to complete */
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&dev->read_wait, &wait);
- if (!dev->read_urb_finished)
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->read_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
timeout = schedule_timeout(COMMAND_TIMEOUT);
- else
+ } else {
+ spin_unlock_irqrestore(&dev->buflock, flags);
set_current_state(TASK_RUNNING);
+ }
remove_wait_queue(&dev->read_wait, &wait);
if (timeout <= 0) {
retval = bytes_read;
/* if the primary buffer is empty then use it */
- if (should_submit && !dev->interrupt_in_urb->status==-EINPROGRESS) {
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (should_submit && dev->read_urb_finished) {
+ dev->read_urb_finished = 0;
+ spin_unlock_irqrestore(&dev->buflock, flags);
usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
usb_rcvintpipe(dev->udev,
dev->interrupt_in_endpoint->bEndpointAddress),
- dev->interrupt_in_buffer,
- le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
- adu_interrupt_in_callback,
- dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
- dev->read_urb_finished = 0;
- usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0)
+ dev->read_urb_finished = 1;
/* we ignore failure */
+ } else {
+ spin_unlock_irqrestore(&dev->buflock, flags);
}
exit:
static ssize_t adu_write(struct file *file, const __user char *buffer,
size_t count, loff_t *ppos)
{
+ DECLARE_WAITQUEUE(waita, current);
struct adu_device *dev;
size_t bytes_written = 0;
size_t bytes_to_write;
size_t buffer_size;
+ unsigned long flags;
int retval;
- int timeout = 0;
dbg(2," %s : enter, count = %Zd", __FUNCTION__, count);
dev = file->private_data;
- /* lock this object */
retval = mutex_lock_interruptible(&dev->mtx);
if (retval)
goto exit_nolock;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL || dev->minor == 0) {
+ if (dev->udev == NULL) {
retval = -ENODEV;
err("No device or device unplugged %d", retval);
goto exit;
goto exit;
}
-
while (count > 0) {
- if (dev->interrupt_out_urb->status == -EINPROGRESS) {
- timeout = COMMAND_TIMEOUT;
+ add_wait_queue(&dev->write_wait, &waita);
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_irqsave(&dev->buflock, flags);
+ if (!dev->out_urb_finished) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
- while (timeout > 0) {
- if (signal_pending(current)) {
+ mutex_unlock(&dev->mtx);
+ if (signal_pending(current)) {
dbg(1," %s : interrupted", __FUNCTION__);
+ set_current_state(TASK_RUNNING);
retval = -EINTR;
- goto exit;
+ goto exit_onqueue;
}
- mutex_unlock(&dev->mtx);
- timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout);
+ if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
+ dbg(1, "%s - command timed out.", __FUNCTION__);
+ retval = -ETIMEDOUT;
+ goto exit_onqueue;
+ }
+ remove_wait_queue(&dev->write_wait, &waita);
retval = mutex_lock_interruptible(&dev->mtx);
if (retval) {
retval = bytes_written ? bytes_written : retval;
goto exit_nolock;
}
- if (timeout > 0) {
- break;
- }
- dbg(1," %s : interrupted timeout: %d", __FUNCTION__, timeout);
- }
-
-
- dbg(1," %s : final timeout: %d", __FUNCTION__, timeout);
-
- if (timeout == 0) {
- dbg(1, "%s - command timed out.", __FUNCTION__);
- retval = -ETIMEDOUT;
- goto exit;
- }
-
- dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count);
+ dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count);
} else {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dev->write_wait, &waita);
dbg(4," %s : sending, count = %Zd", __FUNCTION__, count);
/* write the data into interrupt_out_buffer from userspace */
bytes_to_write,
adu_interrupt_out_callback,
dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->interrupt_out_endpoint->bInterval);
dev->interrupt_out_urb->actual_length = bytes_to_write;
+ dev->out_urb_finished = 0;
retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
if (retval < 0) {
+ dev->out_urb_finished = 1;
err("Couldn't submit interrupt_out_urb %d", retval);
goto exit;
}
bytes_written += bytes_to_write;
}
}
-
- retval = bytes_written;
+ mutex_unlock(&dev->mtx);
+ return bytes_written;
exit:
- /* unlock the device */
mutex_unlock(&dev->mtx);
exit_nolock:
-
dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ return retval;
+exit_onqueue:
+ remove_wait_queue(&dev->write_wait, &waita);
return retval;
}
dbg(2," %s : enter", __FUNCTION__);
dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
+ mutex_lock(&dev->mtx); /* not interruptible */
+ dev->udev = NULL; /* poison */
minor = dev->minor;
-
- /* give back our minor */
usb_deregister_dev(interface, &adu_class);
- dev->minor = 0;
+ mutex_unlock(&dev->mtx);
- mutex_lock(&dev->mtx); /* not interruptible */
+ mutex_lock(&adutux_mutex);
+ usb_set_intfdata(interface, NULL);
/* if the device is not opened, then we clean up right now */
dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
- if (!dev->open_count) {
- mutex_unlock(&dev->mtx);
+ if (!dev->open_count)
adu_delete(dev);
- } else {
- dev->udev = NULL;
- mutex_unlock(&dev->mtx);
- }
+
+ mutex_unlock(&adutux_mutex);
dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
(minor - ADU_MINOR_BASE));
struct usb_led *dev;
dev = usb_get_intfdata (interface);
- usb_set_intfdata (interface, NULL);
device_remove_file(&interface->dev, &dev_attr_blue);
device_remove_file(&interface->dev, &dev_attr_red);
device_remove_file(&interface->dev, &dev_attr_green);
+ /* first remove the files, then set the pointer to NULL */
+ usb_set_intfdata (interface, NULL);
+
usb_put_dev(dev->udev);
kfree(dev);
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
+ unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
/* Throttle the device if requested by tty */
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
if (!(port->throttled = port->throttle_req))
/* Handle data and continue reading from device */
flush_and_resubmit_read_urb(port);
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
static int keyspan_open (struct usb_serial_port *port, struct file *filp)
{
- struct keyspan_port_private *p_priv;
- struct keyspan_serial_private *s_priv;
- struct usb_serial *serial = port->serial;
+ struct keyspan_port_private *p_priv;
+ struct keyspan_serial_private *s_priv;
+ struct usb_serial *serial = port->serial;
const struct keyspan_device_details *d_details;
int i, err;
+ int baud_rate, device_port;
struct urb *urb;
+ unsigned int cflag;
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
}
+ /* get the terminal config for the setup message now so we don't
+ * need to send 2 of them */
+
+ cflag = port->tty->termios->c_cflag;
+ device_port = port->number - port->serial->minor;
+
+ /* Baud rate calculation takes baud rate as an integer
+ so other rates can be generated if desired. */
+ baud_rate = tty_get_baud_rate(port->tty);
+ /* If no match or invalid, leave as default */
+ if (baud_rate >= 0
+ && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+ NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+ p_priv->baud = baud_rate;
+ }
+
+ /* set CTS/RTS handshake etc. */
+ p_priv->cflag = cflag;
+ p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
+
+ keyspan_send_setup(port, 1);
+ //mdelay(100);
+ //keyspan_set_termios(port, NULL);
+
return (0);
}
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
- return -1;
+ goto error;
} else
dbg("ZLP_REG5 Writing success status%d\n", status);
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+ { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ } /* Terminating entry */
};
#define WS002IN_VENDOR_ID 0x11f6
#define WS002IN_PRODUCT_ID 0x2001
+/* Corega CG-USBRS232R Serial Adapter */
+#define COREGA_VENDOR_ID 0x07aa
+#define COREGA_PRODUCT_ID 0x002a
{ USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/
* is an occasional series of retries that will all fail. */
sdev->retry_hwerror = 1;
+ /* USB disks should allow restart. Some drives spin down
+ * automatically, requiring a START-STOP UNIT command. */
+ sdev->allow_restart = 1;
+
} else {
/* Non-disk-type devices don't need to blacklist any pages
US_FL_FIX_CAPACITY),
/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
-UNUSUAL_DEV( 0x04b0, 0x040f, 0x0200, 0x0200,
- "NIKON",
- "NIKON DSC D200",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
+UNUSUAL_DEV( 0x04b0, 0x040f, 0x0100, 0x0200,
+ "NIKON",
+ "NIKON DSC D200",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
/* Reported by Emil Larsson <emil@swip.net> */
UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101,
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
#endif
+/* Reported by RTE <raszilki@yandex.ru> */
+UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
+ "JetFlash",
+ "TS1GJF2A/120",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Fabrizio Fellini <fello@libero.it> */
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Fujifilm",
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+config FB_EFI
+ bool "EFI-based Framebuffer Support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is UEFI2.0, select Y to add support for
+ Graphics Output Protocol for early console messages to appear.
+
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
depends on (FB = y) && X86 && EFI
obj-$(CONFIG_FB_UVESA) += uvesafb.o
obj-$(CONFIG_FB_VESA) += vesafb.o
obj-$(CONFIG_FB_IMAC) += imacfb.o
+obj-$(CONFIG_FB_EFI) += efifb.o
obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
/* Turn off the LCD controller and the DMA controller */
lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ msleep(10);
+
lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
if (info->var.bits_per_pixel == 1)
CHIP_DEF(PCI_CHIP_RV380_3154, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
CHIP_DEF(PCI_CHIP_RV370_5B60, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV370_5B62, RV380, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV370_5B63, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV370_5B64, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV370_5B65, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV370_5460, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BFIN
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
default y
help
Saying Y here will allow you to use Linux in text mode through a
--- /dev/null
+/*
+ * Framebuffer driver for EFI/UEFI based system
+ *
+ * (c) 2006 Edgar Hucek <gimli@dark-green.com>
+ * Original efi driver written by Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+
+#include <video/vga.h>
+
+static struct fb_var_screeninfo efifb_defined __initdata = {
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .right_margin = 32,
+ .upper_margin = 16,
+ .lower_margin = 4,
+ .vsync_len = 4,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct fb_fix_screeninfo efifb_fix __initdata = {
+ .id = "EFI VGA",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .accel = FB_ACCEL_NONE,
+ .visual = FB_VISUAL_TRUECOLOR,
+};
+
+static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ /*
+ * Set a single color register. The values supplied are
+ * already rounded down to the hardware's capabilities
+ * (according to the entries in the `var' structure). Return
+ * != 0 for invalid regno.
+ */
+
+ if (regno >= info->cmap.len)
+ return 1;
+
+ if (regno < 16) {
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+ ((u32 *)(info->pseudo_palette))[regno] =
+ (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ }
+ return 0;
+}
+
+static struct fb_ops efifb_ops = {
+ .owner = THIS_MODULE,
+ .fb_setcolreg = efifb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static int __init efifb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ int err;
+ unsigned int size_vmode;
+ unsigned int size_remap;
+ unsigned int size_total;
+
+ efifb_fix.smem_start = screen_info.lfb_base;
+ efifb_defined.bits_per_pixel = screen_info.lfb_depth;
+ efifb_defined.xres = screen_info.lfb_width;
+ efifb_defined.yres = screen_info.lfb_height;
+ efifb_fix.line_length = screen_info.lfb_linelength;
+
+ /* size_vmode -- that is the amount of memory needed for the
+ * used video mode, i.e. the minimum amount of
+ * memory we need. */
+ size_vmode = efifb_defined.yres * efifb_fix.line_length;
+
+ /* size_total -- all video memory we have. Used for
+ * entries, ressource allocation and bounds
+ * checking. */
+ size_total = screen_info.lfb_size;
+ if (size_total < size_vmode)
+ size_total = size_vmode;
+
+ /* size_remap -- the amount of video memory we are going to
+ * use for efifb. With modern cards it is no
+ * option to simply use size_total as that
+ * wastes plenty of kernel address space. */
+ size_remap = size_vmode * 2;
+ if (size_remap < size_vmode)
+ size_remap = size_vmode;
+ if (size_remap > size_total)
+ size_remap = size_total;
+ efifb_fix.smem_len = size_remap;
+
+ if (!request_mem_region(efifb_fix.smem_start, size_total, "efifb"))
+ /* We cannot make this fatal. Sometimes this comes from magic
+ spaces our resource handlers simply don't know about */
+ printk(KERN_WARNING
+ "efifb: cannot reserve video memory at 0x%lx\n",
+ efifb_fix.smem_start);
+
+ info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
+ if (!info) {
+ err = -ENOMEM;
+ goto err_release_mem;
+ }
+ info->pseudo_palette = info->par;
+ info->par = NULL;
+
+ info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
+ if (!info->screen_base) {
+ printk(KERN_ERR "efifb: abort, cannot ioremap video memory "
+ "0x%x @ 0x%lx\n",
+ efifb_fix.smem_len, efifb_fix.smem_start);
+ err = -EIO;
+ goto err_unmap;
+ }
+
+ printk(KERN_INFO "efifb: framebuffer at 0x%lx, mapped to 0x%p, "
+ "using %dk, total %dk\n",
+ efifb_fix.smem_start, info->screen_base,
+ size_remap/1024, size_total/1024);
+ printk(KERN_INFO "efifb: mode is %dx%dx%d, linelength=%d, pages=%d\n",
+ efifb_defined.xres, efifb_defined.yres,
+ efifb_defined.bits_per_pixel, efifb_fix.line_length,
+ screen_info.pages);
+
+ efifb_defined.xres_virtual = efifb_defined.xres;
+ efifb_defined.yres_virtual = efifb_fix.smem_len /
+ efifb_fix.line_length;
+ printk(KERN_INFO "efifb: scrolling: redraw\n");
+ efifb_defined.yres_virtual = efifb_defined.yres;
+
+ /* some dummy values for timing to make fbset happy */
+ efifb_defined.pixclock = 10000000 / efifb_defined.xres *
+ 1000 / efifb_defined.yres;
+ efifb_defined.left_margin = (efifb_defined.xres / 8) & 0xf8;
+ efifb_defined.hsync_len = (efifb_defined.xres / 8) & 0xf8;
+
+ efifb_defined.red.offset = screen_info.red_pos;
+ efifb_defined.red.length = screen_info.red_size;
+ efifb_defined.green.offset = screen_info.green_pos;
+ efifb_defined.green.length = screen_info.green_size;
+ efifb_defined.blue.offset = screen_info.blue_pos;
+ efifb_defined.blue.length = screen_info.blue_size;
+ efifb_defined.transp.offset = screen_info.rsvd_pos;
+ efifb_defined.transp.length = screen_info.rsvd_size;
+
+ printk(KERN_INFO "efifb: %s: "
+ "size=%d:%d:%d:%d, shift=%d:%d:%d:%d\n",
+ "Truecolor",
+ screen_info.rsvd_size,
+ screen_info.red_size,
+ screen_info.green_size,
+ screen_info.blue_size,
+ screen_info.rsvd_pos,
+ screen_info.red_pos,
+ screen_info.green_pos,
+ screen_info.blue_pos);
+
+ efifb_fix.ypanstep = 0;
+ efifb_fix.ywrapstep = 0;
+
+ info->fbops = &efifb_ops;
+ info->var = efifb_defined;
+ info->fix = efifb_fix;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+ err = -ENOMEM;
+ goto err_unmap;
+ }
+ if (register_framebuffer(info) < 0) {
+ err = -EINVAL;
+ goto err_fb_dealoc;
+ }
+ printk(KERN_INFO "fb%d: %s frame buffer device\n",
+ info->node, info->fix.id);
+ return 0;
+
+err_fb_dealoc:
+ fb_dealloc_cmap(&info->cmap);
+err_unmap:
+ iounmap(info->screen_base);
+ framebuffer_release(info);
+err_release_mem:
+ release_mem_region(efifb_fix.smem_start, size_total);
+ return err;
+}
+
+static struct platform_driver efifb_driver = {
+ .probe = efifb_probe,
+ .driver = {
+ .name = "efifb",
+ },
+};
+
+static struct platform_device efifb_device = {
+ .name = "efifb",
+};
+
+static int __init efifb_init(void)
+{
+ int ret;
+
+ if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
+ return -ENODEV;
+
+ ret = platform_driver_register(&efifb_driver);
+
+ if (!ret) {
+ ret = platform_device_register(&efifb_device);
+ if (ret)
+ platform_driver_unregister(&efifb_driver);
+ }
+ return ret;
+}
+module_init(efifb_init);
+
+MODULE_LICENSE("GPL");
int i, j;
algo_data->setscl(algo_data->data, 1);
- algo_data->setscl(algo_data->data, 0);
for (i = 0; i < 3; i++) {
/* For some old monitors we need the
* following process to initialize/stop DDC
*/
- algo_data->setsda(algo_data->data, 0);
+ algo_data->setsda(algo_data->data, 1);
msleep(13);
algo_data->setscl(algo_data->data, 1);
algo_data->setsda(algo_data->data, 1);
msleep(15);
algo_data->setscl(algo_data->data, 0);
+ algo_data->setsda(algo_data->data, 0);
if (edid)
break;
}
/* Release the DDC lines when done or the Apple Cinema HD display
* will switch off
*/
- algo_data->setsda(algo_data->data, 0);
- algo_data->setscl(algo_data->data, 0);
+ algo_data->setsda(algo_data->data, 1);
+ algo_data->setscl(algo_data->data, 1);
return edid;
}
size_remap = size_total;
imacfb_fix.smem_len = size_remap;
-#ifndef __i386__
- screen_info.imacpm_seg = 0;
-#endif
-
if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) {
printk(KERN_WARNING
"imacfb: cannot reserve video memory at 0x%lx\n",
#define L1GPU_DISPLAY_SYNC_HSYNC 1
#define L1GPU_DISPLAY_SYNC_VSYNC 2
-#define DDR_SIZE (0) /* used no ddr */
#define GPU_CMD_BUF_SIZE (64 * 1024)
#define GPU_IOIF (0x0d000000UL)
#define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64)
u64 xdr_lpar;
int status, res_index;
struct task_struct *task;
+ unsigned long max_ps3fb_size;
status = ps3_open_hv_device(dev);
if (status) {
ps3fb_set_sync(&dev->core);
+ max_ps3fb_size = _ALIGN_UP(GPU_IOIF, 256*1024*1024) - GPU_IOIF;
+ if (ps3fb_videomemory.size > max_ps3fb_size) {
+ dev_info(&dev->core, "Limiting ps3fb mem size to %lu bytes\n",
+ max_ps3fb_size);
+ ps3fb_videomemory.size = max_ps3fb_size;
+ }
+
/* get gpu context handle */
- status = lv1_gpu_memory_allocate(DDR_SIZE, 0, 0, 0, 0,
+ status = lv1_gpu_memory_allocate(ps3fb_videomemory.size, 0, 0, 0, 0,
&ps3fb.memory_handle, &ddr_lpar);
if (status) {
dev_err(&dev->core, "%s: lv1_gpu_memory_allocate failed: %d\n",
return err;
}
+static int virtio_dev_remove(struct device *_d)
+{
+ struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
+ struct virtio_driver *drv = container_of(dev->dev.driver,
+ struct virtio_driver, driver);
+
+ dev->config->set_status(dev, dev->config->get_status(dev)
+ & ~VIRTIO_CONFIG_S_DRIVER);
+ drv->remove(dev);
+ return 0;
+}
+
int register_virtio_driver(struct virtio_driver *driver)
{
driver->driver.bus = &virtio_bus;
driver->driver.probe = virtio_dev_probe;
+ driver->driver.remove = virtio_dev_remove;
return driver_register(&driver->driver);
}
EXPORT_SYMBOL_GPL(register_virtio_driver);
}
+static int zorro_device_remove(struct device *dev)
+{
+ struct zorro_dev *z = to_zorro_dev(dev);
+ struct zorro_driver *drv = to_zorro_driver(dev->driver);
+
+ if (drv) {
+ if (drv->remove)
+ drv->remove(z);
+ z->driver = NULL;
+ }
+ return 0;
+}
+
+
/**
* zorro_register_driver - register a new Zorro driver
* @drv: the driver structure to register
.name = "zorro",
.match = zorro_bus_match,
.probe = zorro_device_probe,
+ .remove = zorro_device_remove,
};
This option will enlarge your kernel, but it allows debugging of
ocfs2 filesystem issues.
+config OCFS2_DEBUG_FS
+ bool "OCFS2 expensive checks"
+ depends on OCFS2_FS
+ default n
+ help
+ This option will enable expensive consistency checks. Enable
+ this option for debugging only as it is likely to decrease
+ performance of the filesystem.
+
config MINIX_FS
tristate "Minix fs support"
help
ret = 0;
if (to.timed_out) /* Only check after read evt */
break;
- io_schedule();
+ /* Try to only show up in io wait if there are ops
+ * in flight */
+ if (ctx->reqs_active)
+ io_schedule();
+ else
+ schedule();
if (signal_pending(tsk)) {
ret = -EINTR;
break;
brelse(bh);
if (bi->i_dsk_ino) {
- info->si_freeb += BFS_FILEBLOCKS(bi);
+ if (bi->i_sblock)
+ info->si_freeb += bi->i_eblock + 1 - bi->i_sblock;
info->si_freei++;
clear_bit(ino, info->si_imap);
dump_imap("delete_inode", s);
Version 1.52
------------
Fix oops on second mount to server when null auth is used.
+Enable experimental Kerberos support. Return writebehind errors on flush
+and sync so that events like out of disk space get reported properly on
+cached files.
Version 1.51
------------
Restrictions
============
-Servers must support the NTLM SMB dialect (which is the most recent, supported
-by Samba and Windows NT version 4, 2000 and XP and many other SMB/CIFS servers)
Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC
-1001/1002 support for "Netbios-Over-TCP/IP." Neither of these is likely to be a
-problem as most servers support this. IPv6 support is planned for the future,
-and is almost complete.
+1001/1002 support for "Netbios-Over-TCP/IP." This is not likely to be a
+problem as most servers support this.
Valid filenames differ between Windows and Linux. Windows typically restricts
filenames which contain certain reserved characters (e.g.the character :
byte range locks).
remount remount the share (often used to change from ro to rw mounts
or vice versa)
+ cifsacl Report mode bits (e.g. on stat) based on the Windows ACL for
+ the file. (EXPERIMENTAL)
servern Specify the server 's netbios name (RFC1001 name) to use
when attempting to setup a session to the server. This is
This is needed for mounting to some older servers (such
performance enhancement was disabled when
signing turned on in case buffer was modified
just before it was sent, also this flag will
- be used to use the new experimental sessionsetup
- code).
+ be used to use the new experimental directory change
+ notification code).
These experimental features and tracing can be enabled by changing flags in
/proc/fs/cifs (after the cifs module has been installed or built into the
Two other experimental features are under development. To test these
requires enabling CONFIG_CIFS_EXPERIMENTAL
- ipv6 enablement
+ cifsacl support needed to retrieve approximated mode bits based on
+ the contents on the CIFS ACL.
DNOTIFY fcntl: needed for support of directory change
notification and perhaps later for file leases)
returned success.
Also note that "cat /proc/fs/cifs/DebugData" will display information about
-the active sessions and the shares that are mounted. Note: NTLMv2 enablement
-will not work since its implementation is not quite complete yet. Do not alter
-the ExtendedSecurity configuration value unless you are doing specific testing.
-Enabling extended security works to Windows 2000 Workstations and XP but not to
-Windows 2000 server or Samba since it does not usually send "raw NTLMSSP"
-(instead it sends NTLMSSP encapsulated in SPNEGO/GSSAPI, which support is not
-complete in the CIFS VFS yet).
+the active sessions and the shares that are mounted.
+Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is enabled
+but requires a user space helper (from the Samba project). NTLM and NTLMv2 and
+LANMAN support do not require this helpr.
c) Better pam/winbind integration (e.g. to handle uid mapping
better)
-d) Kerberos/SPNEGO session setup support - (started)
+d) Verify that Kerberos signing works
e) Cleanup now unneeded SessSetup code in
fs/cifs/connect.c and add back in NTLMSSP code if any servers
.describe = user_describe,
};
+#define MAX_VER_STR_LEN 9 /* length of longest version string e.g.
+ strlen(";ver=0xFF") */
+#define MAX_MECH_STR_LEN 13 /* length of longest security mechanism name, eg
+ in future could have strlen(";sec=ntlmsspi") */
+#define MAX_IPV6_ADDR_LEN 42 /* eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */
/* get a key struct with a SPNEGO security blob, suitable for session setup */
struct key *
-cifs_get_spnego_key(struct cifsSesInfo *sesInfo, const char *hostname)
+cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
{
struct TCP_Server_Info *server = sesInfo->server;
char *description, *dp;
size_t desc_len;
struct key *spnego_key;
+ const char *hostname = server->hostname;
-
- /* version + ;ip{4|6}= + address + ;host=hostname +
- ;sec= + ;uid= + NULL */
- desc_len = 4 + 5 + 32 + 1 + 5 + strlen(hostname) +
- strlen(";sec=krb5") + 7 + sizeof(uid_t)*2 + 1;
+ /* BB: come up with better scheme for determining length */
+ /* length of fields (with semicolons): ver=0xyz ipv4= ipaddress host=
+ hostname sec=mechanism uid=0x uid */
+ desc_len = MAX_VER_STR_LEN + 5 + MAX_IPV6_ADDR_LEN + 1 + 6 +
+ strlen(hostname) + MAX_MECH_STR_LEN + 8 + (sizeof(uid_t) * 2);
spnego_key = ERR_PTR(-ENOMEM);
description = kzalloc(desc_len, GFP_KERNEL);
if (description == NULL)
dp = description;
/* start with version and hostname portion of UNC string */
spnego_key = ERR_PTR(-EINVAL);
- sprintf(dp, "0x%2.2x;host=%s;", CIFS_SPNEGO_UPCALL_VERSION,
+ sprintf(dp, "ver=0x%x;host=%s;", CIFS_SPNEGO_UPCALL_VERSION,
hostname);
dp = description + strlen(description);
#ifdef __KERNEL__
extern struct key_type cifs_spnego_key_type;
+extern struct key *cifs_get_spnego_key(struct cifsSesInfo *sesInfo);
#endif /* KERNEL */
#endif /* _CIFS_SPNEGO_H */
pmode is the existing mode (we only want to overwrite part of this
bits to set can be: S_IRWXU, S_IRWXG or S_IRWXO ie 00700 or 00070 or 00007
*/
-static void access_flags_to_mode(__u32 ace_flags, int type, umode_t *pmode,
+static void access_flags_to_mode(__le32 ace_flags, int type, umode_t *pmode,
umode_t *pbits_to_set)
{
+ __u32 flags = le32_to_cpu(ace_flags);
/* the order of ACEs is important. The canonical order is to begin with
DENY entries followed by ALLOW, otherwise an allow entry could be
encountered first, making the subsequent deny entry like "dead code"
/* For deny ACEs we change the mask so that subsequent allow access
control entries do not turn on the bits we are denying */
if (type == ACCESS_DENIED) {
- if (ace_flags & GENERIC_ALL) {
+ if (flags & GENERIC_ALL) {
*pbits_to_set &= ~S_IRWXUGO;
}
- if ((ace_flags & GENERIC_WRITE) ||
- ((ace_flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
+ if ((flags & GENERIC_WRITE) ||
+ ((flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
*pbits_to_set &= ~S_IWUGO;
- if ((ace_flags & GENERIC_READ) ||
- ((ace_flags & FILE_READ_RIGHTS) == FILE_READ_RIGHTS))
+ if ((flags & GENERIC_READ) ||
+ ((flags & FILE_READ_RIGHTS) == FILE_READ_RIGHTS))
*pbits_to_set &= ~S_IRUGO;
- if ((ace_flags & GENERIC_EXECUTE) ||
- ((ace_flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
+ if ((flags & GENERIC_EXECUTE) ||
+ ((flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
*pbits_to_set &= ~S_IXUGO;
return;
} else if (type != ACCESS_ALLOWED) {
}
/* else ACCESS_ALLOWED type */
- if (ace_flags & GENERIC_ALL) {
+ if (flags & GENERIC_ALL) {
*pmode |= (S_IRWXUGO & (*pbits_to_set));
#ifdef CONFIG_CIFS_DEBUG2
cFYI(1, ("all perms"));
#endif
return;
}
- if ((ace_flags & GENERIC_WRITE) ||
- ((ace_flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
+ if ((flags & GENERIC_WRITE) ||
+ ((flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
*pmode |= (S_IWUGO & (*pbits_to_set));
- if ((ace_flags & GENERIC_READ) ||
- ((ace_flags & FILE_READ_RIGHTS) == FILE_READ_RIGHTS))
+ if ((flags & GENERIC_READ) ||
+ ((flags & FILE_READ_RIGHTS) == FILE_READ_RIGHTS))
*pmode |= (S_IRUGO & (*pbits_to_set));
- if ((ace_flags & GENERIC_EXECUTE) ||
- ((ace_flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
+ if ((flags & GENERIC_EXECUTE) ||
+ ((flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
*pmode |= (S_IXUGO & (*pbits_to_set));
#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("access flags 0x%x mode now 0x%x", ace_flags, *pmode));
+ cFYI(1, ("access flags 0x%x mode now 0x%x", flags, *pmode));
#endif
return;
}
/* BB need to add parm so we can store the SID BB */
+ if (!pdacl) {
+ /* no DACL in the security descriptor, set
+ all the permissions for user/group/other */
+ inode->i_mode |= S_IRWXUGO;
+ return;
+ }
+
/* validate that we do not go past end of acl */
if (end_of_acl < (char *)pdacl + le16_to_cpu(pdacl->size)) {
cERROR(1, ("ACL too small to parse DACL"));
user/group/other have no permissions */
inode->i_mode &= ~(S_IRWXUGO);
- if (!pdacl) {
- /* no DACL in the security descriptor, set
- all the permissions for user/group/other */
- inode->i_mode |= S_IRWXUGO;
- return;
- }
acl_base = (char *)pdacl;
acl_size = sizeof(struct cifs_acl);
cifs_inode->cifsAttrs = 0x20; /* default */
atomic_set(&cifs_inode->inUse, 0);
cifs_inode->time = 0;
+ cifs_inode->write_behind_rc = 0;
/* Until the file is open and we have gotten oplock
info back from the server, can not assume caching of
file data or metadata */
struct cifsTconInfo *pTcon;
struct inode *inode;
__u16 netfid;
- int rc;
+ int rc, waitrc = 0;
set_freezable();
do {
filemap_fdatawrite(inode->i_mapping);
if (CIFS_I(inode)->clientCanCacheRead
== 0) {
- filemap_fdatawait(inode->i_mapping);
+ waitrc = filemap_fdatawait(inode->i_mapping);
invalidate_remote_inode(inode);
}
+ if (rc == 0)
+ rc = waitrc;
} else
rc = 0;
/* mutex_unlock(&inode->i_mutex);*/
unsigned int len;
union {
char ntlm[CIFS_SESS_KEY_SIZE + 16];
+ char krb5[CIFS_SESS_KEY_SIZE + 16]; /* BB: length correct? */
struct {
char key[16];
struct ntlmv2_resp resp;
/* 15 character server name + 0x20 16th byte indicating type = srv */
char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL];
char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2];
+ char *hostname; /* hostname portion of UNC string */
struct socket *ssocket;
union {
struct sockaddr_in sockAddr;
#define CIFS_LARGE_BUFFER 2
#define CIFS_IOVEC 4 /* array of response buffers */
+/* Type of Request to SendReceive2 */
+#define CIFS_STD_OP 0 /* normal request timeout */
+#define CIFS_LONG_OP 1 /* long op (up to 45 sec, oplock time) */
+#define CIFS_VLONG_OP 2 /* sloow op - can take up to 180 seconds */
+#define CIFS_BLOCKING_OP 4 /* operation can block */
+#define CIFS_ASYNC_OP 8 /* do not wait for response */
+#define CIFS_TIMEOUT_MASK 0x00F /* only one of 5 above set in req */
+#define CIFS_LOG_ERROR 0x010 /* log NT STATUS if non-zero */
+#define CIFS_LARGE_BUF_OP 0x020 /* large request buffer */
+#define CIFS_NO_RESP 0x040 /* no response buffer required */
+
/* Security Flags: indicate type of session setup needed */
#define CIFSSEC_MAY_SIGN 0x00001
#define CIFSSEC_MAY_NTLM 0x00002
struct smb_hdr * /* input */ ,
struct smb_hdr * /* out */ ,
int * /* bytes returned */ , const int long_op);
+extern int SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses,
+ struct smb_hdr *in_buf, int flags);
extern int SendReceive2(const unsigned int /* xid */ , struct cifsSesInfo *,
struct kvec *, int /* nvec to send */,
- int * /* type of buf returned */ , const int long_op,
- const int logError /* whether to log status code*/ );
+ int * /* type of buf returned */ , const int flags);
extern int SendReceiveBlockingLock(const unsigned int /* xid */ ,
struct cifsTconInfo *,
struct smb_hdr * /* input */ ,
extern int small_smb_init_no_tc(const int smb_cmd, const int wct,
struct cifsSesInfo *ses,
void **request_buf);
-extern struct key *cifs_get_spnego_key(struct cifsSesInfo *sesInfo,
- const char *hostname);
extern int CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
const int stage,
const struct nls_table *nls_cp);
extern int CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int disposition,
const int access_flags, const int omode,
- __u16 * netfid, int *pOplock, FILE_ALL_INFO *,
+ __u16 *netfid, int *pOplock, FILE_ALL_INFO *,
const struct nls_table *nls_codepage, int remap);
extern int SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int disposition,
const int access_flags, const int omode,
- __u16 * netfid, int *pOplock, FILE_ALL_INFO *,
+ __u16 *netfid, int *pOplock, FILE_ALL_INFO *,
const struct nls_table *nls_codepage, int remap);
extern int CIFSPOSIXCreate(const int xid, struct cifsTconInfo *tcon,
- u32 posix_flags, __u64 mode, __u16 * netfid,
+ u32 posix_flags, __u64 mode, __u16 *netfid,
FILE_UNIX_BASIC_INFO *pRetData,
__u32 *pOplock, const char *name,
const struct nls_table *nls_codepage, int remap);
const __u64 offset, unsigned int *nbytes,
struct kvec *iov, const int nvec, const int long_op);
extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
- const unsigned char *searchName, __u64 * inode_number,
+ const unsigned char *searchName, __u64 *inode_number,
const struct nls_table *nls_codepage,
int remap_special_chars);
extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
const char *local_acl, const int buflen, const int acl_type,
const struct nls_table *nls_codepage, int remap_special_chars);
extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon,
- const int netfid, __u64 * pExtAttrBits, __u64 *pMask);
+ const int netfid, __u64 *pExtAttrBits, __u64 *pMask);
#endif /* _CIFSPROTO_H */
CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon)
{
struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response; /* BB removeme BB */
int rc = 0;
- int length;
cFYI(1, ("In tree disconnect"));
/*
if (rc) {
up(&tcon->tconSem);
return rc;
- } else {
- smb_buffer_response = smb_buffer; /* BB removeme BB */
}
- rc = SendReceive(xid, tcon->ses, smb_buffer, smb_buffer_response,
- &length, 0);
+
+ rc = SendReceiveNoRsp(xid, tcon->ses, smb_buffer, 0);
if (rc)
cFYI(1, ("Tree disconnect failed %d", rc));
- if (smb_buffer)
- cifs_small_buf_release(smb_buffer);
up(&tcon->tconSem);
/* No need to return error on this operation if tid invalidated and
int
CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses)
{
- struct smb_hdr *smb_buffer_response;
LOGOFF_ANDX_REQ *pSMB;
int rc = 0;
- int length;
cFYI(1, ("In SMBLogoff for session disconnect"));
if (ses)
return rc;
}
- smb_buffer_response = (struct smb_hdr *)pSMB; /* BB removeme BB */
-
if (ses->server) {
pSMB->hdr.Mid = GetNextMid(ses->server);
pSMB->hdr.Uid = ses->Suid;
pSMB->AndXCommand = 0xFF;
- rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
- smb_buffer_response, &length, 0);
+ rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0);
if (ses->server) {
atomic_dec(&ses->server->socketUseCount);
if (atomic_read(&ses->server->socketUseCount) == 0) {
}
}
up(&ses->sesSem);
- cifs_small_buf_release(pSMB);
/* if session dead then we do not need to do ulogoff,
since server closed smb session, no sense reporting
pSMB->ByteCount = cpu_to_le16(count);
/* long_op set to 1 to allow for oplock break timeouts */
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 1);
+ (struct smb_hdr *)pSMBr, &bytes_returned, CIFS_LONG_OP);
cifs_stats_inc(&tcon->num_opens);
if (rc) {
cFYI(1, ("Error in Open = %d", rc));
pSMB->ByteCount = cpu_to_le16(count);
/* long_op set to 1 to allow for oplock break timeouts */
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 1);
+ (struct smb_hdr *)pSMBr, &bytes_returned, CIFS_LONG_OP);
cifs_stats_inc(&tcon->num_opens);
if (rc) {
cFYI(1, ("Error in Open = %d", rc));
iov[0].iov_base = (char *)pSMB;
iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovecs */,
- &resp_buf_type, 0 /* not long op */, 1 /* log err */ );
+ &resp_buf_type, CIFS_STD_OP | CIFS_LOG_ERROR);
cifs_stats_inc(&tcon->num_reads);
pSMBr = (READ_RSP *)iov[0].iov_base;
if (rc) {
rc = SendReceive2(xid, tcon->ses, iov, n_vec + 1, &resp_buf_type,
- long_op, 0 /* do not log STATUS code */ );
+ long_op);
cifs_stats_inc(&tcon->num_writes);
if (rc) {
cFYI(1, ("Send error Write2 = %d", rc));
int timeout = 0;
__u16 count;
- cFYI(1, ("In CIFSSMBLock - timeout %d numLock %d", waitFlag, numLock));
+ cFYI(1, ("CIFSSMBLock timeout %d numLock %d", waitFlag, numLock));
rc = small_smb_init(SMB_COM_LOCKING_ANDX, 8, tcon, (void **) &pSMB);
if (rc)
pSMBr = (LOCK_RSP *)pSMB; /* BB removeme BB */
if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) {
- timeout = -1; /* no response expected */
+ timeout = CIFS_ASYNC_OP; /* no response expected */
pSMB->Timeout = 0;
} else if (waitFlag == TRUE) {
- timeout = 3; /* blocking operation, no timeout */
+ timeout = CIFS_BLOCKING_OP; /* blocking operation, no timeout */
pSMB->Timeout = cpu_to_le32(-1);/* blocking - do not time out */
} else {
pSMB->Timeout = 0;
if (waitFlag) {
rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned);
+ cifs_small_buf_release(pSMB);
} else {
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, timeout);
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *)pSMB,
+ timeout);
+ /* SMB buffer freed by function above */
}
cifs_stats_inc(&tcon->num_locks);
if (rc) {
cFYI(1, ("Send error in Lock = %d", rc));
}
- cifs_small_buf_release(pSMB);
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
int rc = 0;
int timeout = 0;
int bytes_returned = 0;
+ int resp_buf_type = 0;
__u16 params, param_offset, offset, byte_count, count;
+ struct kvec iov[1];
cFYI(1, ("Posix Lock"));
parm_data->lock_type = cpu_to_le16(lock_type);
if (waitFlag) {
- timeout = 3; /* blocking operation, no timeout */
+ timeout = CIFS_BLOCKING_OP; /* blocking operation, no timeout */
parm_data->lock_flags = cpu_to_le16(1);
pSMB->Timeout = cpu_to_le32(-1);
} else
rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned);
} else {
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, timeout);
+ iov[0].iov_base = (char *)pSMB;
+ iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+ rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovecs */,
+ &resp_buf_type, timeout);
+ pSMB = NULL; /* request buf already freed by SendReceive2. Do
+ not try to free it twice below on exit */
+ pSMBr = (struct smb_com_transaction2_sfi_rsp *)iov[0].iov_base;
}
if (rc) {
if (pSMB)
cifs_small_buf_release(pSMB);
+ if (resp_buf_type == CIFS_SMALL_BUFFER)
+ cifs_small_buf_release(iov[0].iov_base);
+ else if (resp_buf_type == CIFS_LARGE_BUFFER)
+ cifs_buf_release(iov[0].iov_base);
+
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
{
int rc = 0;
CLOSE_REQ *pSMB = NULL;
- CLOSE_RSP *pSMBr = NULL;
- int bytes_returned;
cFYI(1, ("In CIFSSMBClose"));
/* do not retry on dead session on close */
if (rc)
return rc;
- pSMBr = (CLOSE_RSP *)pSMB; /* BB removeme BB */
-
pSMB->FileID = (__u16) smb_file_id;
pSMB->LastWriteTime = 0xFFFFFFFF;
pSMB->ByteCount = 0;
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
cifs_stats_inc(&tcon->num_closes);
if (rc) {
if (rc != -EINTR) {
}
}
- cifs_small_buf_release(pSMB);
-
/* Since session is dead, file will be closed on server already */
if (rc == -EAGAIN)
rc = 0;
iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovec */, &buf_type,
- 0 /* not long op */, 0 /* do not log STATUS codes */ );
+ CIFS_STD_OP);
cifs_stats_inc(&tcon->num_acl_get);
if (rc) {
cFYI(1, ("Send error in QuerySecDesc = %d", rc));
{
int rc = 0;
FINDCLOSE_REQ *pSMB = NULL;
- CLOSE_RSP *pSMBr = NULL; /* BB removeme BB */
- int bytes_returned;
cFYI(1, ("In CIFSSMBFindClose"));
rc = small_smb_init(SMB_COM_FIND_CLOSE2, 1, tcon, (void **)&pSMB);
if (rc)
return rc;
- pSMBr = (CLOSE_RSP *)pSMB; /* BB removeme BB */
pSMB->FileID = searchHandle;
pSMB->ByteCount = 0;
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
if (rc) {
cERROR(1, ("Send error in FindClose = %d", rc));
}
cifs_stats_inc(&tcon->num_fclose);
- cifs_small_buf_release(pSMB);
/* Since session is dead, search handle closed on server already */
if (rc == -EAGAIN)
__u16 fid, __u32 pid_of_opener, int SetAllocation)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
- struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
char *data_offset;
struct file_end_of_file_info *parm_data;
int rc = 0;
- int bytes_returned = 0;
__u16 params, param_offset, offset, byte_count, count;
cFYI(1, ("SetFileSize (via SetFileInfo) %lld",
if (rc)
return rc;
- pSMBr = (struct smb_com_transaction2_sfi_rsp *)pSMB;
-
pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));
pSMB->Reserved4 = 0;
pSMB->hdr.smb_buf_length += byte_count;
pSMB->ByteCount = cpu_to_le16(byte_count);
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
if (rc) {
cFYI(1,
("Send error in SetFileInfo (SetFileSize) = %d",
rc));
}
- if (pSMB)
- cifs_small_buf_release(pSMB);
-
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
const FILE_BASIC_INFO *data, __u16 fid)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
- struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
char *data_offset;
int rc = 0;
- int bytes_returned = 0;
__u16 params, param_offset, offset, byte_count, count;
cFYI(1, ("Set Times (via SetFileInfo)"));
if (rc)
return rc;
- pSMBr = (struct smb_com_transaction2_sfi_rsp *)pSMB;
-
/* At this point there is no need to override the current pid
with the pid of the opener, but that could change if we someday
use an existing handle (rather than opening one on the fly) */
pSMB->hdr.smb_buf_length += byte_count;
pSMB->ByteCount = cpu_to_le16(byte_count);
memcpy(data_offset, data, sizeof(FILE_BASIC_INFO));
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
if (rc) {
cFYI(1, ("Send error in Set Time (SetFileInfo) = %d", rc));
}
- cifs_small_buf_release(pSMB);
-
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
pSMB->ByteCount = 0;
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, -1);
+ (struct smb_hdr *)pSMBr, &bytes_returned,
+ CIFS_ASYNC_OP);
if (rc) {
cFYI(1, ("Error in Notify = %d", rc));
} else {
csocket = server->ssocket;
wake_up(&server->response_q);
continue;
- } else if (length < 4) {
- cFYI(1, ("less than four bytes received (%d bytes)",
- length));
+ } else if (length < pdu_length) {
+ cFYI(1, ("requested %d bytes but only got %d bytes",
+ pdu_length, length));
pdu_length -= length;
msleep(1);
goto incomplete_rcv;
}
write_unlock(&GlobalSMBSeslock);
+ kfree(server->hostname);
kfree(server);
if (length > 0)
mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
return 0;
}
+/* extract the host portion of the UNC string */
+static char *
+extract_hostname(const char *unc)
+{
+ const char *src;
+ char *dst, *delim;
+ unsigned int len;
+
+ /* skip double chars at beginning of string */
+ /* BB: check validity of these bytes? */
+ src = unc + 2;
+
+ /* delimiter between hostname and sharename is always '\\' now */
+ delim = strchr(src, '\\');
+ if (!delim)
+ return ERR_PTR(-EINVAL);
+
+ len = delim - src;
+ dst = kmalloc((len + 1), GFP_KERNEL);
+ if (dst == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ memcpy(dst, src, len);
+ dst[len] = '\0';
+
+ return dst;
+}
+
static int
cifs_parse_mount_options(char *options, const char *devname,
struct smb_vol *vol)
memset(&volume_info, 0, sizeof(struct smb_vol));
if (cifs_parse_mount_options(mount_data, devname, &volume_info)) {
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
if (volume_info.nullauth) {
cifserror("No username specified");
/* In userspace mount helper we can get user name from alternate
locations such as env variables and files on disk */
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
if (volume_info.UNCip && volume_info.UNC) {
if (rc <= 0) {
/* we failed translating address */
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
cFYI(1, ("UNC: %s ip: %s", volume_info.UNC, volume_info.UNCip));
/* BB using ip addr as server name to connect to the
DFS root below */
cERROR(1, ("Connecting to DFS root not implemented yet"));
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
} else /* which servers DFS root would we conect to */ {
cERROR(1,
("CIFS mount error: No UNC path (e.g. -o "
"unc=//192.168.1.100/public) specified"));
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* this is needed for ASCII cp to Unicode converts */
if (cifs_sb->local_nls == NULL) {
cERROR(1, ("CIFS mount error: iocharset %s not found",
volume_info.iocharset));
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -ELIBACC;
+ rc = -ELIBACC;
+ goto out;
}
}
&sin_server6.sin6_addr,
volume_info.username, &srvTcp);
} else {
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
if (srvTcp) {
"Aborting operation"));
if (csocket != NULL)
sock_release(csocket);
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return rc;
+ goto out;
}
srvTcp = kzalloc(sizeof(struct TCP_Server_Info), GFP_KERNEL);
if (!srvTcp) {
rc = -ENOMEM;
sock_release(csocket);
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return rc;
+ goto out;
} else {
memcpy(&srvTcp->addr.sockAddr, &sin_server,
sizeof(struct sockaddr_in));
/* BB Add code for ipv6 case too */
srvTcp->ssocket = csocket;
srvTcp->protocolType = IPV4;
+ srvTcp->hostname = extract_hostname(volume_info.UNC);
+ if (IS_ERR(srvTcp->hostname)) {
+ rc = PTR_ERR(srvTcp->hostname);
+ sock_release(csocket);
+ goto out;
+ }
init_waitqueue_head(&srvTcp->response_q);
init_waitqueue_head(&srvTcp->request_q);
INIT_LIST_HEAD(&srvTcp->pending_mid_q);
srvTcp->tcpStatus = CifsNew;
init_MUTEX(&srvTcp->tcpSem);
srvTcp->tsk = kthread_run((void *)(void *)cifs_demultiplex_thread, srvTcp, "cifsd");
- if ( IS_ERR(srvTcp->tsk) ) {
+ if (IS_ERR(srvTcp->tsk)) {
rc = PTR_ERR(srvTcp->tsk);
cERROR(1, ("error %d create cifsd thread", rc));
srvTcp->tsk = NULL;
sock_release(csocket);
- kfree(volume_info.UNC);
- kfree(volume_info.password);
- kfree(volume_info.prepath);
- FreeXid(xid);
- return rc;
+ kfree(srvTcp->hostname);
+ goto out;
}
wait_for_completion(&cifsd_complete);
rc = 0;
if (existingCifsSes) {
pSesInfo = existingCifsSes;
cFYI(1, ("Existing smb sess found"));
- kfree(volume_info.password);
- /* volume_info.UNC freed at end of function */
} else if (!rc) {
cFYI(1, ("Existing smb sess not found"));
pSesInfo = sesInfoAlloc();
if (!rc) {
/* volume_info.password freed at unmount */
- if (volume_info.password)
+ if (volume_info.password) {
pSesInfo->password = volume_info.password;
+ /* set to NULL to prevent freeing on exit */
+ volume_info.password = NULL;
+ }
if (volume_info.username)
strncpy(pSesInfo->userName,
volume_info.username,
up(&pSesInfo->sesSem);
if (!rc)
atomic_inc(&srvTcp->socketUseCount);
- } else
- kfree(volume_info.password);
+ }
}
/* search for existing tcon to this server share */
"", cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- kfree(volume_info.UNC);
- FreeXid(xid);
- return -ENODEV;
+ rc = -ENODEV;
+ goto out;
} else {
/* BB Do we need to wrap sesSem around
* this TCon call and Unix SetFS as
(in which case it is not needed anymore) but when new sesion is created
the password ptr is put in the new session structure (in which case the
password will be freed at unmount time) */
+out:
+ /* zero out password before freeing */
+ if (volume_info.password != NULL) {
+ memset(volume_info.password, 0, strlen(volume_info.password));
+ kfree(volume_info.password);
+ }
kfree(volume_info.UNC);
kfree(volume_info.prepath);
FreeXid(xid);
pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, 1);
+ &bytes_returned, CIFS_LONG_OP);
if (rc) {
/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
} else if ((smb_buffer_response->WordCount == 3)
pSMB->req.ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, 1);
+ &bytes_returned, CIFS_LONG_OP);
if (smb_buffer_response->Status.CifsError ==
cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
pSMB->req.ByteCount = cpu_to_le16(count);
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, 1);
+ &bytes_returned, CIFS_LONG_OP);
if (rc) {
/* rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
} else if ((smb_buffer_response->WordCount == 3) ||
pSMB->hdr.smb_buf_length += count;
pSMB->ByteCount = cpu_to_le16(count);
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length, 0);
+ rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
+ CIFS_STD_OP);
/* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
/* above now done in SendReceive */
if (file->f_path.dentry->d_inode->i_mapping) {
/* BB no need to lock inode until after invalidate
since namei code should already have it locked? */
- filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+ rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+ if (rc != 0)
+ CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
}
cFYI(1, ("invalidating remote inode since open detected it "
"changed"));
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
- filemap_write_and_wait(inode->i_mapping);
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0)
+ CIFS_I(inode)->write_behind_rc = rc;
/* temporarily disable caching while we
go to server to get inode info */
pCifsInode->clientCanCacheAll = FALSE;
xid = GetXid();
if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = 2; /* writes past end of file can take a long time */
+ long_op = CIFS_VLONG_OP; /* writes past EOF take long time */
else
- long_op = 1;
+ long_op = CIFS_LONG_OP;
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
}
} else
*poffset += bytes_written;
- long_op = FALSE; /* subsequent writes fast -
+ long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
xid = GetXid();
if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = 2; /* writes past end of file can take a long time */
+ long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */
else
- long_op = 1;
+ long_op = CIFS_LONG_OP;
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
}
} else
*poffset += bytes_written;
- long_op = FALSE; /* subsequent writes fast -
+ long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
read_unlock(&GlobalSMBSeslock);
return open_file;
}
-
+
read_unlock(&GlobalSMBSeslock);
/* Had to unlock since following call can block */
rc = cifs_reopen_file(open_file->pfile, FALSE);
- if (!rc) {
+ if (!rc) {
if (!open_file->closePend)
return open_file;
else { /* start over in case this was deleted */
/* can not use this handle, no write
pending on this one after all */
atomic_dec(&open_file->wrtPending);
-
+
if (open_file->closePend) /* list could have changed */
goto refind_writable;
/* else we simply continue to the next entry. Thus
open_file->netfid,
bytes_to_write, offset,
&bytes_written, iov, n_iov,
- 1);
+ CIFS_LONG_OP);
atomic_dec(&open_file->wrtPending);
if (rc || bytes_written < bytes_to_write) {
cERROR(1, ("Write2 ret %d, wrote %d",
rc, bytes_written));
/* BB what if continued retry is
requested via mount flags? */
- set_bit(AS_EIO, &mapping->flags);
+ if (rc == -ENOSPC)
+ set_bit(AS_ENOSPC, &mapping->flags);
+ else
+ set_bit(AS_EIO, &mapping->flags);
} else {
cifs_stats_bytes_written(cifs_sb->tcon,
bytes_written);
cFYI(1, ("Sync file - name: %s datasync: 0x%x",
dentry->d_name.name, datasync));
- rc = filemap_fdatawrite(inode->i_mapping);
- if (rc == 0)
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc == 0) {
+ rc = CIFS_I(inode)->write_behind_rc;
CIFS_I(inode)->write_behind_rc = 0;
+ }
FreeXid(xid);
return rc;
}
filemapfdatawrite appears easier for the time being */
rc = filemap_fdatawrite(inode->i_mapping);
- if (!rc) /* reset wb rc if we were able to write out dirty pages */
+ /* reset wb rc if we were able to write out dirty pages */
+ if (!rc) {
+ rc = CIFS_I(inode)->write_behind_rc;
CIFS_I(inode)->write_behind_rc = 0;
+ }
cFYI(1, ("Flush inode %p file %p rc %d", inode, file, rc));
int cifs_revalidate(struct dentry *direntry)
{
int xid;
- int rc = 0;
+ int rc = 0, wbrc = 0;
char *full_path;
struct cifs_sb_info *cifs_sb;
struct cifsInodeInfo *cifsInode;
if (direntry->d_inode->i_mapping) {
/* do we need to lock inode until after invalidate completes
below? */
- filemap_fdatawrite(direntry->d_inode->i_mapping);
+ wbrc = filemap_fdatawrite(direntry->d_inode->i_mapping);
+ if (wbrc)
+ CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
}
if (invalidate_inode) {
/* shrink_dcache not necessary now that cifs dentry ops
shrink_dcache_parent(direntry); */
if (S_ISREG(direntry->d_inode->i_mode)) {
if (direntry->d_inode->i_mapping)
- filemap_fdatawait(direntry->d_inode->i_mapping);
+ wbrc = filemap_fdatawait(direntry->d_inode->i_mapping);
+ if (wbrc)
+ CIFS_I(direntry->d_inode)->write_behind_rc = wbrc;
/* may eventually have to do this for open files too */
if (list_empty(&(cifsInode->openFileList))) {
/* changed on server - flush read ahead pages */
/* BB check if we need to refresh inode from server now ? BB */
- /* need to flush data before changing file size on server */
- filemap_write_and_wait(direntry->d_inode->i_mapping);
-
if (attrs->ia_valid & ATTR_SIZE) {
+ /*
+ Flush data before changing file size on server. If the
+ flush returns error, store it to report later and continue.
+ BB: This should be smarter. Why bother flushing pages that
+ will be truncated anyway? Also, should we error out here if
+ the flush returns error?
+ */
+ rc = filemap_write_and_wait(direntry->d_inode->i_mapping);
+ if (rc != 0) {
+ CIFS_I(direntry->d_inode)->write_behind_rc = rc;
+ rc = 0;
+ }
+
/* To avoid spurious oplock breaks from server, in the case of
inodes that we already have open, avoid doing path based
setting of file size if we can do it by handle.
#include "ntlmssp.h"
#include "nterr.h"
#include <linux/utsname.h>
+#include "cifs_spnego.h"
extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
unsigned char *p24);
SESSION_SETUP_ANDX *pSMB;
__u32 capabilities;
int count;
- int resp_buf_type = 0;
- struct kvec iov[2];
+ int resp_buf_type;
+ struct kvec iov[3];
enum securityEnum type;
__u16 action;
int bytes_remaining;
+ struct key *spnego_key = NULL;
if (ses == NULL)
return -EINVAL;
capabilities = cifs_ssetup_hdr(ses, pSMB);
- /* we will send the SMB in two pieces,
- a fixed length beginning part, and a
- second part which will include the strings
- and rest of bcc area, in order to avoid having
- to do a large buffer 17K allocation */
+ /* we will send the SMB in three pieces:
+ a fixed length beginning part, an optional
+ SPNEGO blob (which can be zero length), and a
+ last part which will include the strings
+ and rest of bcc area. This allows us to avoid
+ a large buffer 17K allocation */
iov[0].iov_base = (char *)pSMB;
iov[0].iov_len = smb_buf->smb_buf_length + 4;
+ /* setting this here allows the code at the end of the function
+ to free the request buffer if there's an error */
+ resp_buf_type = CIFS_SMALL_BUFFER;
+
/* 2000 big enough to fit max user, domain, NOS name etc. */
str_area = kmalloc(2000, GFP_KERNEL);
if (str_area == NULL) {
- cifs_small_buf_release(smb_buf);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto ssetup_exit;
}
bcc_ptr = str_area;
ses->flags &= ~CIFS_SES_LANMAN;
+ iov[1].iov_base = NULL;
+ iov[1].iov_len = 0;
+
if (type == LANMAN) {
#ifdef CONFIG_CIFS_WEAK_PW_HASH
char lnm_session_key[CIFS_SESS_KEY_SIZE];
struct ntlmv2_resp */
if (v2_sess_key == NULL) {
- cifs_small_buf_release(smb_buf);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto ssetup_exit;
}
pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
unicode_ssetup_strings(&bcc_ptr, ses, nls_cp);
} else
ascii_ssetup_strings(&bcc_ptr, ses, nls_cp);
- } else /* NTLMSSP or SPNEGO */ {
+ } else if (type == Kerberos) {
+#ifdef CONFIG_CIFS_UPCALL
+ struct cifs_spnego_msg *msg;
+ spnego_key = cifs_get_spnego_key(ses);
+ if (IS_ERR(spnego_key)) {
+ rc = PTR_ERR(spnego_key);
+ spnego_key = NULL;
+ goto ssetup_exit;
+ }
+
+ msg = spnego_key->payload.data;
+ /* bail out if key is too long */
+ if (msg->sesskey_len >
+ sizeof(ses->server->mac_signing_key.data.krb5)) {
+ cERROR(1, ("Kerberos signing key too long (%u bytes)",
+ msg->sesskey_len));
+ rc = -EOVERFLOW;
+ goto ssetup_exit;
+ }
+ ses->server->mac_signing_key.len = msg->sesskey_len;
+ memcpy(ses->server->mac_signing_key.data.krb5, msg->data,
+ msg->sesskey_len);
pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
capabilities |= CAP_EXTENDED_SECURITY;
pSMB->req.Capabilities = cpu_to_le32(capabilities);
- /* BB set password lengths */
+ iov[1].iov_base = msg->data + msg->sesskey_len;
+ iov[1].iov_len = msg->secblob_len;
+ pSMB->req.SecurityBlobLength = cpu_to_le16(iov[1].iov_len);
+
+ if (ses->capabilities & CAP_UNICODE) {
+ /* unicode strings must be word aligned */
+ if (iov[0].iov_len % 2) {
+ *bcc_ptr = 0;
+ bcc_ptr++;
+ }
+ unicode_oslm_strings(&bcc_ptr, nls_cp);
+ unicode_domain_string(&bcc_ptr, ses, nls_cp);
+ } else
+ /* BB: is this right? */
+ ascii_ssetup_strings(&bcc_ptr, ses, nls_cp);
+#else /* ! CONFIG_CIFS_UPCALL */
+ cERROR(1, ("Kerberos negotiated but upcall support disabled!"));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+#endif /* CONFIG_CIFS_UPCALL */
+ } else {
+ cERROR(1, ("secType %d not supported!", type));
+ rc = -ENOSYS;
+ goto ssetup_exit;
}
- count = (long) bcc_ptr - (long) str_area;
+ iov[2].iov_base = str_area;
+ iov[2].iov_len = (long) bcc_ptr - (long) str_area;
+
+ count = iov[1].iov_len + iov[2].iov_len;
smb_buf->smb_buf_length += count;
BCC_LE(smb_buf) = cpu_to_le16(count);
- iov[1].iov_base = str_area;
- iov[1].iov_len = count;
- rc = SendReceive2(xid, ses, iov, 2 /* num_iovecs */, &resp_buf_type,
- 0 /* not long op */, 1 /* log NT STATUS if any */ );
+ rc = SendReceive2(xid, ses, iov, 3 /* num_iovecs */, &resp_buf_type,
+ CIFS_STD_OP /* not long */ | CIFS_LOG_ERROR);
/* SMB request buf freed in SendReceive2 */
cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
ses, nls_cp);
ssetup_exit:
+ if (spnego_key)
+ key_put(spnego_key);
kfree(str_area);
if (resp_buf_type == CIFS_SMALL_BUFFER) {
cFYI(1, ("ssetup freeing small buf %p", iov[0].iov_base));
static int wait_for_free_request(struct cifsSesInfo *ses, const int long_op)
{
- if (long_op == -1) {
+ if (long_op == CIFS_ASYNC_OP) {
/* oplock breaks must not be held up */
atomic_inc(&ses->server->inFlight);
} else {
as they are allowed to block on server */
/* update # of requests on the wire to server */
- if (long_op < 3)
+ if (long_op != CIFS_BLOCKING_OP)
atomic_inc(&ses->server->inFlight);
spin_unlock(&GlobalMid_Lock);
break;
}
}
+
+/*
+ *
+ * Send an SMB Request. No response info (other than return code)
+ * needs to be parsed.
+ *
+ * flags indicate the type of request buffer and how long to wait
+ * and whether to log NT STATUS code (error) before mapping it to POSIX error
+ *
+ */
+int
+SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses,
+ struct smb_hdr *in_buf, int flags)
+{
+ int rc;
+ struct kvec iov[1];
+ int resp_buf_type;
+
+ iov[0].iov_base = (char *)in_buf;
+ iov[0].iov_len = in_buf->smb_buf_length + 4;
+ flags |= CIFS_NO_RESP;
+ rc = SendReceive2(xid, ses, iov, 1, &resp_buf_type, flags);
+#ifdef CONFIG_CIFS_DEBUG2
+ cFYI(1, ("SendRcvNoR flags %d rc %d", flags, rc));
+#endif
+ return rc;
+}
+
int
SendReceive2(const unsigned int xid, struct cifsSesInfo *ses,
struct kvec *iov, int n_vec, int *pRespBufType /* ret */,
- const int long_op, const int logError)
+ const int flags)
{
int rc = 0;
+ int long_op;
unsigned int receive_len;
unsigned long timeout;
struct mid_q_entry *midQ;
struct smb_hdr *in_buf = iov[0].iov_base;
+ long_op = flags & CIFS_TIMEOUT_MASK;
+
*pRespBufType = CIFS_NO_BUFFER; /* no response buf yet */
if ((ses == NULL) || (ses->server == NULL)) {
if (rc < 0)
goto out;
- if (long_op == -1)
- goto out;
- else if (long_op == 2) /* writes past end of file can take loong time */
+ if (long_op == CIFS_STD_OP)
+ timeout = 15 * HZ;
+ else if (long_op == CIFS_VLONG_OP) /* e.g. slow writes past EOF */
timeout = 180 * HZ;
- else if (long_op == 1)
+ else if (long_op == CIFS_LONG_OP)
timeout = 45 * HZ; /* should be greater than
servers oplock break timeout (about 43 seconds) */
- else
- timeout = 15 * HZ;
+ else if (long_op == CIFS_ASYNC_OP)
+ goto out;
+ else if (long_op == CIFS_BLOCKING_OP)
+ timeout = 0x7FFFFFFF; /* large, but not so large as to wrap */
+ else {
+ cERROR(1, ("unknown timeout flag %d", long_op));
+ rc = -EIO;
+ goto out;
+ }
/* wait for 15 seconds or until woken up due to response arriving or
due to last connection to this server being unmounted */
}
/* BB special case reconnect tid and uid here? */
- rc = map_smb_to_linux_error(midQ->resp_buf, logError);
+ rc = map_smb_to_linux_error(midQ->resp_buf,
+ flags & CIFS_LOG_ERROR);
/* convert ByteCount if necessary */
if (receive_len >= sizeof(struct smb_hdr) - 4
(2 * midQ->resp_buf->WordCount) + 2 /* bcc */ )
BCC(midQ->resp_buf) =
le16_to_cpu(BCC_LE(midQ->resp_buf));
- midQ->resp_buf = NULL; /* mark it so will not be freed
- by DeleteMidQEntry */
+ if ((flags & CIFS_NO_RESP) == 0)
+ midQ->resp_buf = NULL; /* mark it so buf will
+ not be freed by
+ DeleteMidQEntry */
} else {
rc = -EIO;
cFYI(1, ("Bad MID state?"));
if (rc < 0)
goto out;
- if (long_op == -1)
+ if (long_op == CIFS_STD_OP)
+ timeout = 15 * HZ;
+ /* wait for 15 seconds or until woken up due to response arriving or
+ due to last connection to this server being unmounted */
+ else if (long_op == CIFS_ASYNC_OP)
goto out;
- else if (long_op == 2) /* writes past end of file can take loong time */
+ else if (long_op == CIFS_VLONG_OP) /* writes past EOF can be slow */
timeout = 180 * HZ;
- else if (long_op == 1)
+ else if (long_op == CIFS_LONG_OP)
timeout = 45 * HZ; /* should be greater than
servers oplock break timeout (about 43 seconds) */
- else
- timeout = 15 * HZ;
- /* wait for 15 seconds or until woken up due to response arriving or
- due to last connection to this server being unmounted */
+ else if (long_op == CIFS_BLOCKING_OP)
+ timeout = 0x7FFFFFFF; /* large but no so large as to wrap */
+ else {
+ cERROR(1, ("unknown timeout flag %d", long_op));
+ rc = -EIO;
+ goto out;
+ }
+
if (signal_pending(current)) {
/* if signal pending do not hold up user for full smb timeout
but we still give response a chance to complete */
pSMB->hdr.Mid = GetNextMid(ses->server);
return SendReceive(xid, ses, in_buf, out_buf,
- &bytes_returned, 0);
+ &bytes_returned, CIFS_STD_OP);
}
int
to the same server. We may make this configurable later or
use ses->maxReq */
- rc = wait_for_free_request(ses, 3);
+ rc = wait_for_free_request(ses, CIFS_BLOCKING_OP);
if (rc)
return rc;
COMPATIBLE_IOCTL(TIOCGPTN)
COMPATIBLE_IOCTL(TIOCSPTLCK)
COMPATIBLE_IOCTL(TIOCSERGETLSR)
+#ifdef TCGETS2
+COMPATIBLE_IOCTL(TCGETS2)
+COMPATIBLE_IOCTL(TCSETS2)
+COMPATIBLE_IOCTL(TCSETSW2)
+COMPATIBLE_IOCTL(TCSETSF2)
+#endif
/* Little f */
COMPATIBLE_IOCTL(FIOCLEX)
COMPATIBLE_IOCTL(FIONCLEX)
but keep the previous behaviour for now. */
if (!ispipe && !S_ISREG(inode->i_mode))
goto close_fail;
+ /*
+ * Dont allow local users get cute and trick others to coredump
+ * into their pre-created files:
+ */
+ if (inode->i_uid != current->fsuid)
+ goto close_fail;
if (!file->f_op)
goto close_fail;
if (!file->f_op->write)
/* symlink.c */
extern const struct inode_operations ext2_fast_symlink_inode_operations;
extern const struct inode_operations ext2_symlink_inode_operations;
+
+static inline ext2_fsblk_t
+ext2_group_first_block_no(struct super_block *sb, unsigned long group_no)
+{
+ return group_no * (ext2_fsblk_t)EXT2_BLOCKS_PER_GROUP(sb) +
+ le32_to_cpu(EXT2_SB(sb)->s_es->s_first_data_block);
+}
req->out.args[0].value = outarg;
}
+static u64 fuse_get_attr_version(struct fuse_conn *fc)
+{
+ u64 curr_version;
+
+ /*
+ * The spin lock isn't actually needed on 64bit archs, but we
+ * don't yet care too much about such optimizations.
+ */
+ spin_lock(&fc->lock);
+ curr_version = fc->attr_version;
+ spin_unlock(&fc->lock);
+
+ return curr_version;
+}
+
/*
* Check whether the dentry is still valid
*
return 0;
}
- spin_lock(&fc->lock);
- attr_version = fc->attr_version;
- spin_unlock(&fc->lock);
+ attr_version = fuse_get_attr_version(fc);
parent = dget_parent(entry);
fuse_lookup_init(req, parent->d_inode, entry, &outarg);
return ERR_PTR(PTR_ERR(forget_req));
}
- spin_lock(&fc->lock);
- attr_version = fc->attr_version;
- spin_unlock(&fc->lock);
+ attr_version = fuse_get_attr_version(fc);
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
fuse_put_request(fc, req);
if (!err) {
+ /* ctime changes */
+ fuse_invalidate_attr(oldent->d_inode);
+
fuse_invalidate_attr(olddir);
if (olddir != newdir)
fuse_invalidate_attr(newdir);
if (IS_ERR(req))
return PTR_ERR(req);
- spin_lock(&fc->lock);
- attr_version = fc->attr_version;
- spin_unlock(&fc->lock);
+ attr_version = fuse_get_attr_version(fc);
memset(&inarg, 0, sizeof(inarg));
memset(&outarg, 0, sizeof(outarg));
return err;
}
+int fuse_update_attributes(struct inode *inode, struct kstat *stat,
+ struct file *file, bool *refreshed)
+{
+ struct fuse_inode *fi = get_fuse_inode(inode);
+ int err;
+ bool r;
+
+ if (fi->i_time < get_jiffies_64()) {
+ r = true;
+ err = fuse_do_getattr(inode, stat, file);
+ } else {
+ r = false;
+ err = 0;
+ if (stat) {
+ generic_fillattr(inode, stat);
+ stat->mode = fi->orig_i_mode;
+ }
+ }
+
+ if (refreshed != NULL)
+ *refreshed = r;
+
+ return err;
+}
+
/*
* Calling into a user-controlled filesystem gives the filesystem
* daemon ptrace-like capabilities over the requester process. This
*/
if ((fc->flags & FUSE_DEFAULT_PERMISSIONS) ||
((mask & MAY_EXEC) && S_ISREG(inode->i_mode))) {
- struct fuse_inode *fi = get_fuse_inode(inode);
- if (fi->i_time < get_jiffies_64()) {
- err = fuse_do_getattr(inode, NULL, NULL);
- if (err)
- return err;
-
- refreshed = true;
- }
+ err = fuse_update_attributes(inode, NULL, NULL, &refreshed);
+ if (err)
+ return err;
}
if (fc->flags & FUSE_DEFAULT_PERMISSIONS) {
struct page *page;
struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
- struct fuse_file *ff = file->private_data;
struct fuse_req *req;
if (is_bad_inode(inode))
}
req->num_pages = 1;
req->pages[0] = page;
- fuse_read_fill(req, ff, inode, file->f_pos, PAGE_SIZE, FUSE_READDIR);
+ fuse_read_fill(req, file, inode, file->f_pos, PAGE_SIZE, FUSE_READDIR);
request_send(fc, req);
nbytes = req->out.args[0].size;
err = req->out.h.error;
struct kstat *stat)
{
struct inode *inode = entry->d_inode;
- struct fuse_inode *fi = get_fuse_inode(inode);
struct fuse_conn *fc = get_fuse_conn(inode);
- int err;
if (!fuse_allow_task(fc, current))
return -EACCES;
- if (fi->i_time < get_jiffies_64())
- err = fuse_do_getattr(inode, stat, NULL);
- else {
- err = 0;
- generic_fillattr(inode, stat);
- stat->mode = fi->orig_i_mode;
- }
-
- return err;
+ return fuse_update_attributes(inode, stat, NULL, NULL);
}
static int fuse_setxattr(struct dentry *entry, const char *name,
return fuse_fsync_common(file, de, datasync, 0);
}
-void fuse_read_fill(struct fuse_req *req, struct fuse_file *ff,
+void fuse_read_fill(struct fuse_req *req, struct file *file,
struct inode *inode, loff_t pos, size_t count, int opcode)
{
struct fuse_read_in *inarg = &req->misc.read_in;
+ struct fuse_file *ff = file->private_data;
inarg->fh = ff->fh;
inarg->offset = pos;
inarg->size = count;
+ inarg->flags = file->f_flags;
req->in.h.opcode = opcode;
req->in.h.nodeid = get_node_id(inode);
req->in.numargs = 1;
fl_owner_t owner)
{
struct fuse_conn *fc = get_fuse_conn(inode);
- struct fuse_file *ff = file->private_data;
- fuse_read_fill(req, ff, inode, pos, count, FUSE_READ);
+ fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
if (owner != NULL) {
struct fuse_read_in *inarg = &req->misc.read_in;
fuse_put_request(fc, req);
}
-static void fuse_send_readpages(struct fuse_req *req, struct fuse_file *ff,
+static void fuse_send_readpages(struct fuse_req *req, struct file *file,
struct inode *inode)
{
struct fuse_conn *fc = get_fuse_conn(inode);
loff_t pos = page_offset(req->pages[0]);
size_t count = req->num_pages << PAGE_CACHE_SHIFT;
req->out.page_zeroing = 1;
- fuse_read_fill(req, ff, inode, pos, count, FUSE_READ);
+ fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
if (fc->async_read) {
+ struct fuse_file *ff = file->private_data;
req->ff = fuse_file_get(ff);
req->end = fuse_readpages_end;
request_send_background(fc, req);
struct fuse_fill_data {
struct fuse_req *req;
- struct fuse_file *ff;
+ struct file *file;
struct inode *inode;
};
(req->num_pages == FUSE_MAX_PAGES_PER_REQ ||
(req->num_pages + 1) * PAGE_CACHE_SIZE > fc->max_read ||
req->pages[req->num_pages - 1]->index + 1 != page->index)) {
- fuse_send_readpages(req, data->ff, inode);
+ fuse_send_readpages(req, data->file, inode);
data->req = req = fuse_get_req(fc);
if (IS_ERR(req)) {
unlock_page(page);
if (is_bad_inode(inode))
goto out;
- data.ff = file->private_data;
+ data.file = file;
data.inode = inode;
data.req = fuse_get_req(fc);
err = PTR_ERR(data.req);
err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
if (!err) {
if (data.req->num_pages)
- fuse_send_readpages(data.req, data.ff, inode);
+ fuse_send_readpages(data.req, file, inode);
else
fuse_put_request(fc, data.req);
}
return err;
}
-static void fuse_write_fill(struct fuse_req *req, struct fuse_file *ff,
+static ssize_t fuse_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ struct inode *inode = iocb->ki_filp->f_mapping->host;
+
+ if (pos + iov_length(iov, nr_segs) > i_size_read(inode)) {
+ int err;
+ /*
+ * If trying to read past EOF, make sure the i_size
+ * attribute is up-to-date.
+ */
+ err = fuse_update_attributes(inode, NULL, iocb->ki_filp, NULL);
+ if (err)
+ return err;
+ }
+
+ return generic_file_aio_read(iocb, iov, nr_segs, pos);
+}
+
+static void fuse_write_fill(struct fuse_req *req, struct file *file,
struct inode *inode, loff_t pos, size_t count,
int writepage)
{
struct fuse_conn *fc = get_fuse_conn(inode);
+ struct fuse_file *ff = file->private_data;
struct fuse_write_in *inarg = &req->misc.write.in;
struct fuse_write_out *outarg = &req->misc.write.out;
inarg->offset = pos;
inarg->size = count;
inarg->write_flags = writepage ? FUSE_WRITE_CACHE : 0;
+ inarg->flags = file->f_flags;
req->in.h.opcode = FUSE_WRITE;
req->in.h.nodeid = get_node_id(inode);
req->in.argpages = 1;
fl_owner_t owner)
{
struct fuse_conn *fc = get_fuse_conn(inode);
- fuse_write_fill(req, file->private_data, inode, pos, count, 0);
+ fuse_write_fill(req, file, inode, pos, count, 0);
if (owner != NULL) {
struct fuse_write_in *inarg = &req->misc.write.in;
inarg->write_flags |= FUSE_WRITE_LOCKOWNER;
static const struct file_operations fuse_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
- .aio_read = generic_file_aio_read,
+ .aio_read = fuse_file_aio_read,
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.mmap = fuse_file_mmap,
/**
* Initialize READ or READDIR request
*/
-void fuse_read_fill(struct fuse_req *req, struct fuse_file *ff,
+void fuse_read_fill(struct fuse_req *req, struct file *file,
struct inode *inode, loff_t pos, size_t count, int opcode);
/**
int fuse_allow_task(struct fuse_conn *fc, struct task_struct *task);
u64 fuse_lock_owner_id(struct fuse_conn *fc, fl_owner_t id);
+
+int fuse_update_attributes(struct inode *inode, struct kstat *stat,
+ struct file *file, bool *refreshed);
fi->i_time = 0;
fi->nodeid = 0;
fi->nlookup = 0;
+ fi->attr_version = 0;
INIT_LIST_HEAD(&fi->write_files);
fi->forget_req = fuse_request_alloc();
if (!fi->forget_req) {
arg->major = FUSE_KERNEL_VERSION;
arg->minor = FUSE_KERNEL_MINOR_VERSION;
arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
- arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_FILE_OPS |
- FUSE_ATOMIC_O_TRUNC;
+ arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
/*
* There is one special case to worry about: if we have just pulled the
- * buffer off a committing transaction's forget list, then even if the
- * checkpoint list is empty, the transaction obviously cannot be
- * dropped!
+ * buffer off a running or committing transaction's checkpoing list,
+ * then even if the checkpoint list is empty, the transaction obviously
+ * cannot be dropped!
*
- * The locking here around j_committing_transaction is a bit sleazy.
+ * The locking here around t_state is a bit sleazy.
* See the comment at the end of journal_commit_transaction().
*/
- if (transaction == journal->j_committing_transaction) {
- JBUFFER_TRACE(jh, "belongs to committing transaction");
+ if (transaction->t_state != T_FINISHED) {
+ JBUFFER_TRACE(jh, "belongs to running/committing transaction");
goto out;
}
}
spin_unlock(&journal->j_list_lock);
/*
- * This is a bit sleazy. We borrow j_list_lock to protect
- * journal->j_committing_transaction in __journal_remove_checkpoint.
- * Really, __journal_remove_checkpoint should be using j_state_lock but
- * it's a bit hassle to hold that across __journal_remove_checkpoint
+ * This is a bit sleazy. We use j_list_lock to protect transition
+ * of a transaction into T_FINISHED state and calling
+ * __journal_drop_transaction(). Otherwise we could race with
+ * other checkpointing code processing the transaction...
*/
spin_lock(&journal->j_state_lock);
spin_lock(&journal->j_list_lock);
/* Put_super will send a SIGKILL and then wait on the sem.
*/
- while (signal_pending(current)) {
+ while (signal_pending(current) || freezing(current)) {
siginfo_t info;
unsigned long signr;
#include "nfs4_fs.h"
#include "delegation.h"
#include "iostat.h"
+#include "internal.h"
/* #define NFS_DEBUG_VERBOSE 1 */
* handled automatically by nfs_direct_read_result(). Otherwise, if
* no requests have been sent, just return an error.
*/
-static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned long user_addr, size_t count, loff_t pos)
+static ssize_t nfs_direct_read_schedule_segment(struct nfs_direct_req *dreq,
+ const struct iovec *iov,
+ loff_t pos)
{
struct nfs_open_context *ctx = dreq->ctx;
struct inode *inode = ctx->path.dentry->d_inode;
+ unsigned long user_addr = (unsigned long)iov->iov_base;
+ size_t count = iov->iov_len;
size_t rsize = NFS_SERVER(inode)->rsize;
unsigned int pgbase;
int result;
ssize_t started = 0;
- get_dreq(dreq);
-
do {
struct nfs_read_data *data;
size_t bytes;
count -= bytes;
} while (count != 0);
+ if (started)
+ return started;
+ return result < 0 ? (ssize_t) result : -EFAULT;
+}
+
+static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq,
+ const struct iovec *iov,
+ unsigned long nr_segs,
+ loff_t pos)
+{
+ ssize_t result = -EINVAL;
+ size_t requested_bytes = 0;
+ unsigned long seg;
+
+ get_dreq(dreq);
+
+ for (seg = 0; seg < nr_segs; seg++) {
+ const struct iovec *vec = &iov[seg];
+ result = nfs_direct_read_schedule_segment(dreq, vec, pos);
+ if (result < 0)
+ break;
+ requested_bytes += result;
+ if ((size_t)result < vec->iov_len)
+ break;
+ pos += vec->iov_len;
+ }
+
if (put_dreq(dreq))
nfs_direct_complete(dreq);
- if (started)
+ if (requested_bytes != 0)
return 0;
- return result < 0 ? (ssize_t) result : -EFAULT;
+
+ if (result < 0)
+ return result;
+ return -EIO;
}
-static ssize_t nfs_direct_read(struct kiocb *iocb, unsigned long user_addr, size_t count, loff_t pos)
+static ssize_t nfs_direct_read(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
{
ssize_t result = 0;
sigset_t oldset;
if (!is_sync_kiocb(iocb))
dreq->iocb = iocb;
- nfs_add_stats(inode, NFSIOS_DIRECTREADBYTES, count);
rpc_clnt_sigmask(clnt, &oldset);
- result = nfs_direct_read_schedule(dreq, user_addr, count, pos);
+ result = nfs_direct_read_schedule_iovec(dreq, iov, nr_segs, pos);
if (!result)
result = nfs_direct_wait(dreq);
rpc_clnt_sigunmask(clnt, &oldset);
* handled automatically by nfs_direct_write_result(). Otherwise, if
* no requests have been sent, just return an error.
*/
-static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned long user_addr, size_t count, loff_t pos, int sync)
+static ssize_t nfs_direct_write_schedule_segment(struct nfs_direct_req *dreq,
+ const struct iovec *iov,
+ loff_t pos, int sync)
{
struct nfs_open_context *ctx = dreq->ctx;
struct inode *inode = ctx->path.dentry->d_inode;
+ unsigned long user_addr = (unsigned long)iov->iov_base;
+ size_t count = iov->iov_len;
size_t wsize = NFS_SERVER(inode)->wsize;
unsigned int pgbase;
int result;
ssize_t started = 0;
- get_dreq(dreq);
-
do {
struct nfs_write_data *data;
size_t bytes;
count -= bytes;
} while (count != 0);
+ if (started)
+ return started;
+ return result < 0 ? (ssize_t) result : -EFAULT;
+}
+
+static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq,
+ const struct iovec *iov,
+ unsigned long nr_segs,
+ loff_t pos, int sync)
+{
+ ssize_t result = 0;
+ size_t requested_bytes = 0;
+ unsigned long seg;
+
+ get_dreq(dreq);
+
+ for (seg = 0; seg < nr_segs; seg++) {
+ const struct iovec *vec = &iov[seg];
+ result = nfs_direct_write_schedule_segment(dreq, vec,
+ pos, sync);
+ if (result < 0)
+ break;
+ requested_bytes += result;
+ if ((size_t)result < vec->iov_len)
+ break;
+ pos += vec->iov_len;
+ }
+
if (put_dreq(dreq))
- nfs_direct_write_complete(dreq, inode);
+ nfs_direct_write_complete(dreq, dreq->inode);
- if (started)
+ if (requested_bytes != 0)
return 0;
- return result < 0 ? (ssize_t) result : -EFAULT;
+
+ if (result < 0)
+ return result;
+ return -EIO;
}
-static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, size_t count, loff_t pos)
+static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos,
+ size_t count)
{
ssize_t result = 0;
sigset_t oldset;
if (!is_sync_kiocb(iocb))
dreq->iocb = iocb;
- nfs_add_stats(inode, NFSIOS_DIRECTWRITTENBYTES, count);
-
rpc_clnt_sigmask(clnt, &oldset);
- result = nfs_direct_write_schedule(dreq, user_addr, count, pos, sync);
+ result = nfs_direct_write_schedule_iovec(dreq, iov, nr_segs, pos, sync);
if (!result)
result = nfs_direct_wait(dreq);
rpc_clnt_sigunmask(clnt, &oldset);
ssize_t retval = -EINVAL;
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
- /* XXX: temporary */
- const char __user *buf = iov[0].iov_base;
- size_t count = iov[0].iov_len;
+ size_t count;
+
+ count = iov_length(iov, nr_segs);
+ nfs_add_stats(mapping->host, NFSIOS_DIRECTREADBYTES, count);
- dprintk("nfs: direct read(%s/%s, %lu@%Ld)\n",
+ dprintk("nfs: direct read(%s/%s, %zd@%Ld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name,
- (unsigned long) count, (long long) pos);
-
- if (nr_segs != 1)
- goto out;
+ count, (long long) pos);
- retval = -EFAULT;
- if (!access_ok(VERIFY_WRITE, buf, count))
- goto out;
retval = 0;
if (!count)
goto out;
if (retval)
goto out;
- retval = nfs_direct_read(iocb, (unsigned long) buf, count, pos);
+ retval = nfs_direct_read(iocb, iov, nr_segs, pos);
if (retval > 0)
iocb->ki_pos = pos + retval;
ssize_t retval = -EINVAL;
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
- /* XXX: temporary */
- const char __user *buf = iov[0].iov_base;
- size_t count = iov[0].iov_len;
+ size_t count;
+
+ count = iov_length(iov, nr_segs);
+ nfs_add_stats(mapping->host, NFSIOS_DIRECTWRITTENBYTES, count);
- dprintk("nfs: direct write(%s/%s, %lu@%Ld)\n",
+ dfprintk(VFS, "nfs: direct write(%s/%s, %zd@%Ld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name,
- (unsigned long) count, (long long) pos);
-
- if (nr_segs != 1)
- goto out;
+ count, (long long) pos);
retval = generic_write_checks(file, &pos, &count, 0);
if (retval)
goto out;
+ if (!count)
+ goto out; /* return 0 */
retval = -EINVAL;
if ((ssize_t) count < 0)
if (!count)
goto out;
- retval = -EFAULT;
- if (!access_ok(VERIFY_READ, buf, count))
- goto out;
-
retval = nfs_sync_mapping(mapping);
if (retval)
goto out;
- retval = nfs_direct_write(iocb, (unsigned long) buf, count, pos);
+ retval = nfs_direct_write(iocb, iov, nr_segs, pos, count);
if (retval > 0)
iocb->ki_pos = pos + retval;
#define NFSDBG_FACILITY NFSDBG_CLIENT
+/*
+ * Set the superblock root dentry.
+ * Note that this function frees the inode in case of error.
+ */
+static int nfs_superblock_set_dummy_root(struct super_block *sb, struct inode *inode)
+{
+ /* The mntroot acts as the dummy root dentry for this superblock */
+ if (sb->s_root == NULL) {
+ sb->s_root = d_alloc_root(inode);
+ if (sb->s_root == NULL) {
+ iput(inode);
+ return -ENOMEM;
+ }
+ /* Circumvent igrab(): we know the inode is not being freed */
+ atomic_inc(&inode->i_count);
+ }
+ return 0;
+}
+
/*
* get an NFS2/NFS3 root dentry from the root filehandle
*/
struct inode *inode;
int error;
- /* create a dummy root dentry with dummy inode for this superblock */
- if (!sb->s_root) {
- struct nfs_fh dummyfh;
- struct dentry *root;
- struct inode *iroot;
-
- memset(&dummyfh, 0, sizeof(dummyfh));
- memset(&fattr, 0, sizeof(fattr));
- nfs_fattr_init(&fattr);
- fattr.valid = NFS_ATTR_FATTR;
- fattr.type = NFDIR;
- fattr.mode = S_IFDIR | S_IRUSR | S_IWUSR;
- fattr.nlink = 2;
-
- iroot = nfs_fhget(sb, &dummyfh, &fattr);
- if (IS_ERR(iroot))
- return ERR_PTR(PTR_ERR(iroot));
-
- root = d_alloc_root(iroot);
- if (!root) {
- iput(iroot);
- return ERR_PTR(-ENOMEM);
- }
-
- sb->s_root = root;
- }
-
/* get the actual root for this mount */
fsinfo.fattr = &fattr;
return ERR_PTR(PTR_ERR(inode));
}
+ error = nfs_superblock_set_dummy_root(sb, inode);
+ if (error != 0)
+ return ERR_PTR(error);
+
/* root dentries normally start off anonymous and get spliced in later
* if the dentry tree reaches them; however if the dentry already
* exists, we'll pick it up at this point and use it as the root
dprintk("--> nfs4_get_root()\n");
- /* create a dummy root dentry with dummy inode for this superblock */
- if (!sb->s_root) {
- struct nfs_fh dummyfh;
- struct dentry *root;
- struct inode *iroot;
-
- memset(&dummyfh, 0, sizeof(dummyfh));
- memset(&fattr, 0, sizeof(fattr));
- nfs_fattr_init(&fattr);
- fattr.valid = NFS_ATTR_FATTR;
- fattr.type = NFDIR;
- fattr.mode = S_IFDIR | S_IRUSR | S_IWUSR;
- fattr.nlink = 2;
-
- iroot = nfs_fhget(sb, &dummyfh, &fattr);
- if (IS_ERR(iroot))
- return ERR_PTR(PTR_ERR(iroot));
-
- root = d_alloc_root(iroot);
- if (!root) {
- iput(iroot);
- return ERR_PTR(-ENOMEM);
- }
-
- sb->s_root = root;
- }
-
/* get the info about the server and filesystem */
error = nfs4_server_capabilities(server, mntfh);
if (error < 0) {
return ERR_PTR(PTR_ERR(inode));
}
+ error = nfs_superblock_set_dummy_root(sb, inode);
+ if (error != 0)
+ return ERR_PTR(error);
+
/* root dentries normally start off anonymous and get spliced in later
* if the dentry tree reaches them; however if the dentry already
* exists, we'll pick it up at this point and use it as the root
{
struct nfs_mount_data *data = (struct nfs_mount_data *)options;
+ memset(args, 0, sizeof(*args));
+
if (data == NULL)
goto out_no_data;
- memset(args, 0, sizeof(*args));
args->flags = (NFS_MOUNT_VER3 | NFS_MOUNT_TCP);
args->rsize = NFS_MAX_FILE_IO_SIZE;
args->wsize = NFS_MAX_FILE_IO_SIZE;
error = PTR_ERR(mntroot);
goto error_splat_super;
}
+ if (mntroot->d_inode->i_op != &nfs_dir_inode_operations) {
+ dput(mntroot);
+ error = -ESTALE;
+ goto error_splat_super;
+ }
s->s_flags |= MS_ACTIVE;
mnt->mnt_sb = s;
struct nfs4_mount_data *data = (struct nfs4_mount_data *)options;
char *c;
+ memset(args, 0, sizeof(*args));
+
if (data == NULL)
goto out_no_data;
- memset(args, 0, sizeof(*args));
args->rsize = NFS_MAX_FILE_IO_SIZE;
args->wsize = NFS_MAX_FILE_IO_SIZE;
args->timeo = 600;
return ret;
}
-int nfs_wb_page_priority(struct inode *inode, struct page *page, int how)
+static int nfs_wb_page_priority(struct inode *inode, struct page *page,
+ int how)
{
loff_t range_start = page_offset(page);
loff_t range_end = range_start + (loff_t)(PAGE_CACHE_SIZE - 1);
{
struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
- if (new_size < le16_to_cpu(di->id2.i_data.id_count))
+ if (new_size <= le16_to_cpu(di->id2.i_data.id_count))
return 1;
return 0;
}
#define mlog_errno(st) do { \
int _st = (st); \
if (_st != -ERESTARTSYS && _st != -EINTR && \
- _st != AOP_TRUNCATED_PAGE) \
+ _st != AOP_TRUNCATED_PAGE && _st != -ENOSPC) \
mlog(ML_ERROR, "status = %lld\n", (long long)_st); \
} while (0)
#include "tcp_internal.h"
-/*
- * The linux network stack isn't sparse endian clean.. It has macros like
- * ntohs() which perform the endian checks and structs like sockaddr_in
- * which aren't annotated. So __force is found here to get the build
- * clean. When they emerge from the dark ages and annotate the code
- * we can remove these.
- */
-
#define SC_NODEF_FMT "node %s (num %u) at %u.%u.%u.%u:%u"
#define SC_NODEF_ARGS(sc) sc->sc_node->nd_name, sc->sc_node->nd_num, \
NIPQUAD(sc->sc_node->nd_ipv4_address), \
myaddr.sin_family = AF_INET;
myaddr.sin_addr.s_addr = mynode->nd_ipv4_address;
- myaddr.sin_port = (__force u16)htons(0); /* any port */
+ myaddr.sin_port = htons(0); /* any port */
ret = sock->ops->bind(sock, (struct sockaddr *)&myaddr,
sizeof(myaddr));
if (ret < 0)
goto out;
- node = o2nm_get_node_by_ip((__force __be32)sin.sin_addr.s_addr);
+ node = o2nm_get_node_by_ip(sin.sin_addr.s_addr);
if (node == NULL) {
mlog(ML_NOTICE, "attempt to connect from unknown node at "
"%u.%u.%u.%u:%d\n", NIPQUAD(sin.sin_addr.s_addr),
- ntohs((__force __be16)sin.sin_port));
+ ntohs(sin.sin_port));
ret = -EINVAL;
goto out;
}
mlog(ML_NOTICE, "unexpected connect attempted from a lower "
"numbered node '%s' at " "%u.%u.%u.%u:%d with num %u\n",
node->nd_name, NIPQUAD(sin.sin_addr.s_addr),
- ntohs((__force __be16)sin.sin_port), node->nd_num);
+ ntohs(sin.sin_port), node->nd_num);
ret = -EINVAL;
goto out;
}
mlog(ML_CONN, "attempt to connect from node '%s' at "
"%u.%u.%u.%u:%d but it isn't heartbeating\n",
node->nd_name, NIPQUAD(sin.sin_addr.s_addr),
- ntohs((__force __be16)sin.sin_port));
+ ntohs(sin.sin_port));
ret = -EINVAL;
goto out;
}
mlog(ML_NOTICE, "attempt to connect from node '%s' at "
"%u.%u.%u.%u:%d but it already has an open connection\n",
node->nd_name, NIPQUAD(sin.sin_addr.s_addr),
- ntohs((__force __be16)sin.sin_port));
+ ntohs(sin.sin_port));
goto out;
}
{
struct ocfs2_dentry_lock *dl = dentry->d_fsdata;
- mlog_bug_on_msg(!dl && !(dentry->d_flags & DCACHE_DISCONNECTED),
- "dentry: %.*s\n", dentry->d_name.len,
- dentry->d_name.name);
+ if (!dl) {
+ /*
+ * No dentry lock is ok if we're disconnected or
+ * unhashed.
+ */
+ if (!(dentry->d_flags & DCACHE_DISCONNECTED) &&
+ !d_unhashed(dentry)) {
+ unsigned long long ino = 0ULL;
+ if (inode)
+ ino = (unsigned long long)OCFS2_I(inode)->ip_blkno;
+ mlog(ML_ERROR, "Dentry is missing cluster lock. "
+ "inode: %llu, d_flags: 0x%x, d_name: %.*s\n",
+ ino, dentry->d_flags, dentry->d_name.len,
+ dentry->d_name.name);
+ }
- if (!dl)
goto out;
+ }
mlog_bug_on_msg(dl->dl_count == 0, "dentry: %.*s, count: %u\n",
dentry->d_name.len, dentry->d_name.name,
* but they might own this lockres. wait on them. */
bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0);
if (bit < O2NM_MAX_NODES) {
- mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to"
+ mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to "
"recover before lock mastery can begin\n",
dlm->name, namelen, (char *)lockid, bit);
wait_on_recovery = 1;
spin_lock(&dlm->spinlock);
bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0);
if (bit < O2NM_MAX_NODES) {
- mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to"
+ mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to "
"recover before lock mastery can begin\n",
dlm->name, namelen, (char *)lockid, bit);
wait_on_recovery = 1;
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
- i_size_read(inode), 0);
+ i_size_read(inode), 1);
if (status)
mlog_errno(status);
u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct ocfs2_cached_dealloc_ctxt dealloc;
+ struct address_space *mapping = inode->i_mapping;
ocfs2_init_dealloc_ctxt(&dealloc);
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
ret = ocfs2_truncate_inline(inode, di_bh, byte_start,
- byte_start + byte_len, 1);
- if (ret)
+ byte_start + byte_len, 0);
+ if (ret) {
mlog_errno(ret);
- return ret;
+ goto out;
+ }
+ /*
+ * There's no need to get fancy with the page cache
+ * truncate of an inline-data inode. We're talking
+ * about less than a page here, which will be cached
+ * in the dinode buffer anyway.
+ */
+ unmap_mapping_range(mapping, 0, 0, 0);
+ truncate_inode_pages(mapping, 0);
+ goto out;
}
trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start);
status = -EINVAL;
fe = (struct ocfs2_dinode *) bh->b_data;
if (!OCFS2_IS_VALID_DINODE(fe)) {
- mlog(ML_ERROR, "Invalid dinode #%llu: signature = %.*s\n",
- (unsigned long long)le64_to_cpu(fe->i_blkno), 7,
+ mlog(0, "Invalid dinode #%llu: signature = %.*s\n",
+ (unsigned long long)args->fi_blkno, 7,
fe->i_signature);
goto bail;
}
status = ocfs2_try_open_lock(inode, 1);
if (status == -EAGAIN) {
status = 0;
- mlog(0, "Skipping delete of %llu because it is in use on"
+ mlog(0, "Skipping delete of %llu because it is in use on "
"other nodes\n", (unsigned long long)oi->ip_blkno);
goto bail;
}
alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data;
+#ifdef OCFS2_DEBUG_FS
if (le32_to_cpu(alloc->id1.bitmap1.i_used) !=
ocfs2_local_alloc_count_bits(alloc)) {
ocfs2_error(osb->sb, "local alloc inode %llu says it has "
status = -EIO;
goto bail;
}
+#endif
free_bits = le32_to_cpu(alloc->id1.bitmap1.i_total) -
le32_to_cpu(alloc->id1.bitmap1.i_used);
void *bitmap;
struct ocfs2_local_alloc *la = OCFS2_LOCAL_ALLOC(alloc);
- mlog_entry("total = %u, COUNT = %u, used = %u\n",
+ mlog_entry("total = %u, used = %u\n",
le32_to_cpu(alloc->id1.bitmap1.i_total),
- ocfs2_local_alloc_count_bits(alloc),
le32_to_cpu(alloc->id1.bitmap1.i_used));
if (!alloc->id1.bitmap1.i_total) {
}
if (!ret) {
- if (!ocfs2_is_hard_readonly(osb))
- ocfs2_set_journal_params(osb);
-
/* Only save off the new mount options in case of a successful
* remount. */
osb->s_mount_opt = parsed_options.mount_opt;
osb->s_atime_quantum = parsed_options.atime_quantum;
osb->preferred_slot = parsed_options.slot;
+
+ if (!ocfs2_is_hard_readonly(osb))
+ ocfs2_set_journal_params(osb);
}
out:
return ret;
stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
cputime_to_clock_t(task_utime(p));
- p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+ if (stime >= 0)
+ p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+
return p->prev_stime;
}
#endif
* Find the first task with tgid >= tgid
*
*/
-static struct task_struct *next_tgid(unsigned int tgid,
- struct pid_namespace *ns)
-{
+struct tgid_iter {
+ unsigned int tgid;
struct task_struct *task;
+};
+static struct tgid_iter next_tgid(struct pid_namespace *ns, struct tgid_iter iter)
+{
struct pid *pid;
+ if (iter.task)
+ put_task_struct(iter.task);
rcu_read_lock();
retry:
- task = NULL;
- pid = find_ge_pid(tgid, ns);
+ iter.task = NULL;
+ pid = find_ge_pid(iter.tgid, ns);
if (pid) {
- tgid = pid_nr_ns(pid, ns) + 1;
- task = pid_task(pid, PIDTYPE_PID);
+ iter.tgid = pid_nr_ns(pid, ns);
+ iter.task = pid_task(pid, PIDTYPE_PID);
/* What we to know is if the pid we have find is the
* pid of a thread_group_leader. Testing for task
* being a thread_group_leader is the obvious thing
* found doesn't happen to be a thread group leader.
* As we don't care in the case of readdir.
*/
- if (!task || !has_group_leader_pid(task))
+ if (!iter.task || !has_group_leader_pid(iter.task)) {
+ iter.tgid += 1;
goto retry;
- get_task_struct(task);
+ }
+ get_task_struct(iter.task);
}
rcu_read_unlock();
- return task;
+ return iter;
}
#define TGID_OFFSET (FIRST_PROCESS_ENTRY + ARRAY_SIZE(proc_base_stuff))
static int proc_pid_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
- struct task_struct *task, int tgid)
+ struct tgid_iter iter)
{
char name[PROC_NUMBUF];
- int len = snprintf(name, sizeof(name), "%d", tgid);
+ int len = snprintf(name, sizeof(name), "%d", iter.tgid);
return proc_fill_cache(filp, dirent, filldir, name, len,
- proc_pid_instantiate, task, NULL);
+ proc_pid_instantiate, iter.task, NULL);
}
/* for the /proc/ directory itself, after non-process stuff has been done */
{
unsigned int nr = filp->f_pos - FIRST_PROCESS_ENTRY;
struct task_struct *reaper = get_proc_task(filp->f_path.dentry->d_inode);
- struct task_struct *task;
- int tgid;
+ struct tgid_iter iter;
struct pid_namespace *ns;
if (!reaper)
}
ns = filp->f_dentry->d_sb->s_fs_info;
- tgid = filp->f_pos - TGID_OFFSET;
- for (task = next_tgid(tgid, ns);
- task;
- put_task_struct(task), task = next_tgid(tgid + 1, ns)) {
- tgid = task_pid_nr_ns(task, ns);
- filp->f_pos = tgid + TGID_OFFSET;
- if (proc_pid_fill_cache(filp, dirent, filldir, task, tgid) < 0) {
- put_task_struct(task);
+ iter.task = NULL;
+ iter.tgid = filp->f_pos - TGID_OFFSET;
+ for (iter = next_tgid(ns, iter);
+ iter.task;
+ iter.tgid += 1, iter = next_tgid(ns, iter)) {
+ filp->f_pos = iter.tgid + TGID_OFFSET;
+ if (proc_pid_fill_cache(filp, dirent, filldir, iter) < 0) {
+ put_task_struct(iter.task);
goto out;
}
}
if (de->namelen != dentry->d_name.len)
continue;
if (!memcmp(dentry->d_name.name, de->name, de->namelen)) {
- unsigned int ino = de->low_ino;
+ unsigned int ino;
+ if (de->shadow_proc)
+ de = de->shadow_proc(current, de);
+ ino = de->low_ino;
de_get(de);
spin_unlock(&proc_subdir_lock);
error = -EINVAL;
return 0;
}
-/*
- * Kill an inode that got unregistered..
- */
-static void proc_kill_inodes(struct proc_dir_entry *de)
-{
- struct list_head *p;
- struct super_block *sb;
-
- /*
- * Actually it's a partial revoke().
- */
- spin_lock(&sb_lock);
- list_for_each_entry(sb, &proc_fs_type.fs_supers, s_instances) {
- file_list_lock();
- list_for_each(p, &sb->s_files) {
- struct file *filp = list_entry(p, struct file,
- f_u.fu_list);
- struct dentry *dentry = filp->f_path.dentry;
- struct inode *inode;
- const struct file_operations *fops;
-
- if (dentry->d_op != &proc_dentry_operations)
- continue;
- inode = dentry->d_inode;
- if (PDE(inode) != de)
- continue;
- fops = filp->f_op;
- filp->f_op = NULL;
- fops_put(fops);
- }
- file_list_unlock();
- }
- spin_unlock(&sb_lock);
-}
-
static struct proc_dir_entry *proc_create(struct proc_dir_entry **parent,
const char *name,
mode_t mode,
ent->namelen = len;
ent->mode = mode;
ent->nlink = nlink;
+ atomic_set(&ent->count, 1);
ent->pde_users = 0;
spin_lock_init(&ent->pde_unload_lock);
ent->pde_unload_completion = NULL;
/*
* Remove a /proc entry and free it if it's not currently in use.
- * If it is in use, we set the 'deleted' flag.
*/
void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
{
continue_removing:
if (S_ISDIR(de->mode))
parent->nlink--;
- if (!S_ISREG(de->mode))
- proc_kill_inodes(de);
de->nlink = 0;
WARN_ON(de->subdir);
- if (!atomic_read(&de->count))
+ if (atomic_dec_and_test(&de->count))
free_proc_entry(de);
- else {
- de->deleted = 1;
- printk("remove_proc_entry: %s/%s busy, count=%d\n",
- parent->name, de->name, atomic_read(&de->count));
- }
break;
}
spin_unlock(&proc_subdir_lock);
return;
}
- if (atomic_dec_and_test(&de->count)) {
- if (de->deleted) {
- printk("de_put: deferred delete of %s\n",
- de->name);
- free_proc_entry(de);
- }
- }
+ if (atomic_dec_and_test(&de->count))
+ free_proc_entry(de);
unlock_kernel();
}
}
{
return PROC_I(inode)->fd;
}
-
-extern struct file_system_type proc_fs_type;
}
EXPORT_SYMBOL_GPL(get_proc_net);
-static struct proc_dir_entry *proc_net_shadow;
+static struct proc_dir_entry *shadow_pde;
-static struct dentry *proc_net_shadow_dentry(struct dentry *parent,
+static struct proc_dir_entry *proc_net_shadow(struct task_struct *task,
struct proc_dir_entry *de)
{
- struct dentry *shadow = NULL;
- struct inode *inode;
- if (!de)
- goto out;
- de_get(de);
- inode = proc_get_inode(parent->d_inode->i_sb, de->low_ino, de);
- if (!inode)
- goto out_de_put;
- shadow = d_alloc_name(parent, de->name);
- if (!shadow)
- goto out_iput;
- shadow->d_op = parent->d_op; /* proc_dentry_operations */
- d_instantiate(shadow, inode);
-out:
- return shadow;
-out_iput:
- iput(inode);
-out_de_put:
- de_put(de);
- goto out;
-}
-
-static void *proc_net_follow_link(struct dentry *parent, struct nameidata *nd)
-{
- struct net *net = current->nsproxy->net_ns;
- struct dentry *shadow;
- shadow = proc_net_shadow_dentry(parent, net->proc_net);
- if (!shadow)
- return ERR_PTR(-ENOENT);
-
- dput(nd->dentry);
- /* My dentry count is 1 and that should be enough as the
- * shadow dentry is thrown away immediately.
- */
- nd->dentry = shadow;
- return NULL;
+ return task->nsproxy->net_ns->proc_net;
}
-static struct dentry *proc_net_lookup(struct inode *dir, struct dentry *dentry,
- struct nameidata *nd)
-{
- struct net *net = current->nsproxy->net_ns;
- struct dentry *shadow;
-
- shadow = proc_net_shadow_dentry(nd->dentry, net->proc_net);
- if (!shadow)
- return ERR_PTR(-ENOENT);
-
- dput(nd->dentry);
- nd->dentry = shadow;
-
- return shadow->d_inode->i_op->lookup(shadow->d_inode, dentry, nd);
-}
-
-static int proc_net_setattr(struct dentry *dentry, struct iattr *iattr)
-{
- struct net *net = current->nsproxy->net_ns;
- struct dentry *shadow;
- int ret;
-
- shadow = proc_net_shadow_dentry(dentry->d_parent, net->proc_net);
- if (!shadow)
- return -ENOENT;
- ret = shadow->d_inode->i_op->setattr(shadow, iattr);
- dput(shadow);
- return ret;
-}
-
-static const struct file_operations proc_net_dir_operations = {
- .read = generic_read_dir,
-};
-
-static struct inode_operations proc_net_dir_inode_operations = {
- .follow_link = proc_net_follow_link,
- .lookup = proc_net_lookup,
- .setattr = proc_net_setattr,
-};
-
static __net_init int proc_net_ns_init(struct net *net)
{
struct proc_dir_entry *root, *netd, *net_statd;
int __init proc_net_init(void)
{
- proc_net_shadow = proc_mkdir("net", NULL);
- proc_net_shadow->proc_iops = &proc_net_dir_inode_operations;
- proc_net_shadow->proc_fops = &proc_net_dir_operations;
+ shadow_pde = proc_mkdir("net", NULL);
+ shadow_pde->shadow_proc = proc_net_shadow;
return register_pernet_subsys(&proc_net_ns_ops);
}
put_pid_ns(ns);
}
-struct file_system_type proc_fs_type = {
+static struct file_system_type proc_fs_type = {
.name = "proc",
.get_sb = proc_get_sb,
.kill_sb = proc_kill_sb,
.name = "/proc",
.mode = S_IFDIR | S_IRUGO | S_IXUGO,
.nlink = 2,
+ .count = ATOMIC_INIT(1),
.proc_iops = &proc_root_inode_operations,
.proc_fops = &proc_root_operations,
.parent = &proc_root,
return NULL;
up_write(&s->s_umount);
-
- if (de->deleted) {
- deactivate_super(s);
- return NULL;
- }
-
return s;
}
sysfs_put_active_two(attr_sd);
- BUG_ON(count > (ssize_t)PAGE_SIZE);
+ /*
+ * The code works fine with PAGE_SIZE return but it's likely to
+ * indicate truncated result or overflow in normal use cases.
+ */
+ BUG_ON(count >= (ssize_t)PAGE_SIZE);
if (count >= 0) {
buffer->needs_read_fill = 0;
buffer->count = count;
goto fail;
Eend:
p = (struct ufs_dir_entry *)(kaddr + offs);
- ufs_error (sb, "ext2_check_page",
+ ufs_error(sb, __FUNCTION__,
"entry in directory #%lu spans the page boundary"
"offset=%lu",
dir->i_ino, (page->index<<PAGE_CACHE_SHIFT)+offs);
break;
case UFS_MOUNT_UFSTYPE_NEXTSTEP:
- /*TODO: check may be we need set special dir block size?*/
UFSD("ufstype=nextstep\n");
uspi->s_fsize = block_size = 1024;
uspi->s_fmask = ~(1024 - 1);
uspi->s_fshift = 10;
uspi->s_sbsize = super_block_size = 2048;
uspi->s_sbbase = 0;
+ uspi->s_dirblksize = 1024;
flags |= UFS_DE_OLD | UFS_UID_OLD | UFS_ST_OLD | UFS_CG_OLD;
if (!(sb->s_flags & MS_RDONLY)) {
if (!silent)
break;
case UFS_MOUNT_UFSTYPE_NEXTSTEP_CD:
- /*TODO: check may be we need set special dir block size?*/
UFSD("ufstype=nextstep-cd\n");
uspi->s_fsize = block_size = 2048;
uspi->s_fmask = ~(2048 - 1);
uspi->s_fshift = 11;
uspi->s_sbsize = super_block_size = 2048;
uspi->s_sbbase = 0;
+ uspi->s_dirblksize = 1024;
flags |= UFS_DE_OLD | UFS_UID_OLD | UFS_ST_OLD | UFS_CG_OLD;
if (!(sb->s_flags & MS_RDONLY)) {
if (!silent)
{
int rval;
int i = 0;
- size_t ptr;
- size_t end, end_cur;
- off_t offset;
+ unsigned long pageaddr;
+ unsigned long offset;
+ size_t buflen;
int page_count;
- page_count = PAGE_CACHE_ALIGN(len) >> PAGE_CACHE_SHIFT;
- offset = (off_t) mem - ((off_t)mem & PAGE_CACHE_MASK);
- if (offset && (len > PAGE_CACHE_SIZE))
- page_count++;
+ pageaddr = (unsigned long)mem & PAGE_CACHE_MASK;
+ offset = (unsigned long)mem - pageaddr;
+ buflen = PAGE_CACHE_ALIGN(len + offset);
+ page_count = buflen >> PAGE_CACHE_SHIFT;
/* Free any previous set of page pointers */
if (bp->b_pages)
return rval;
bp->b_offset = offset;
- ptr = (size_t) mem & PAGE_CACHE_MASK;
- end = PAGE_CACHE_ALIGN((size_t) mem + len);
- end_cur = end;
- /* set up first page */
- bp->b_pages[0] = mem_to_page(mem);
-
- ptr += PAGE_CACHE_SIZE;
- bp->b_page_count = ++i;
- while (ptr < end) {
- bp->b_pages[i] = mem_to_page((void *)ptr);
- bp->b_page_count = ++i;
- ptr += PAGE_CACHE_SIZE;
+
+ for (i = 0; i < bp->b_page_count; i++) {
+ bp->b_pages[i] = mem_to_page((void *)pageaddr);
+ pageaddr += PAGE_CACHE_SIZE;
}
bp->b_locked = 0;
- bp->b_count_desired = bp->b_buffer_length = len;
+ bp->b_count_desired = len;
+ bp->b_buffer_length = buflen;
bp->b_flags |= XBF_MAPPED;
return 0;
xfs_buf_t *bp,
int schedule)
{
- bp->b_flags &= ~(XBF_READ | XBF_WRITE);
+ bp->b_flags &= ~(XBF_READ | XBF_WRITE | XBF_READ_AHEAD);
if (bp->b_error == 0)
bp->b_flags |= XBF_DONE;
current->flags |= PF_MEMALLOC;
+ set_freezable();
+
do {
if (unlikely(freezing(current))) {
set_bit(XBT_FORCE_SLEEP, &target->bt_flags);
}
#endif /* CONFIG_XFS_DMAPI */
+/*
+ * Unfortunately we can't just use the clean and simple readdir implementation
+ * below, because nfs might call back into ->lookup from the filldir callback
+ * and that will deadlock the low-level btree code.
+ *
+ * Hopefully we'll find a better workaround that allows to use the optimal
+ * version at least for local readdirs for 2.6.25.
+ */
+#if 0
STATIC int
xfs_file_readdir(
struct file *filp,
return -error;
return 0;
}
+#else
+
+struct hack_dirent {
+ int namlen;
+ loff_t offset;
+ u64 ino;
+ unsigned int d_type;
+ char name[];
+};
+
+struct hack_callback {
+ char *dirent;
+ size_t len;
+ size_t used;
+};
+
+STATIC int
+xfs_hack_filldir(
+ void *__buf,
+ const char *name,
+ int namlen,
+ loff_t offset,
+ u64 ino,
+ unsigned int d_type)
+{
+ struct hack_callback *buf = __buf;
+ struct hack_dirent *de = (struct hack_dirent *)(buf->dirent + buf->used);
+
+ if (buf->used + sizeof(struct hack_dirent) + namlen > buf->len)
+ return -EINVAL;
+
+ de->namlen = namlen;
+ de->offset = offset;
+ de->ino = ino;
+ de->d_type = d_type;
+ memcpy(de->name, name, namlen);
+ buf->used += sizeof(struct hack_dirent) + namlen;
+ return 0;
+}
+
+STATIC int
+xfs_file_readdir(
+ struct file *filp,
+ void *dirent,
+ filldir_t filldir)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ xfs_inode_t *ip = XFS_I(inode);
+ struct hack_callback buf;
+ struct hack_dirent *de;
+ int error;
+ loff_t size;
+ int eof = 0;
+ xfs_off_t start_offset, curr_offset, offset;
+
+ /*
+ * Try fairly hard to get memory
+ */
+ buf.len = PAGE_CACHE_SIZE;
+ do {
+ buf.dirent = kmalloc(buf.len, GFP_KERNEL);
+ if (buf.dirent)
+ break;
+ buf.len >>= 1;
+ } while (buf.len >= 1024);
+
+ if (!buf.dirent)
+ return -ENOMEM;
+
+ curr_offset = filp->f_pos;
+ if (curr_offset == 0x7fffffff)
+ offset = 0xffffffff;
+ else
+ offset = filp->f_pos;
+
+ while (!eof) {
+ int reclen;
+ start_offset = offset;
+
+ buf.used = 0;
+ error = -xfs_readdir(ip, &buf, buf.len, &offset,
+ xfs_hack_filldir);
+ if (error || offset == start_offset) {
+ size = 0;
+ break;
+ }
+
+ size = buf.used;
+ de = (struct hack_dirent *)buf.dirent;
+ while (size > 0) {
+ if (filldir(dirent, de->name, de->namlen,
+ curr_offset & 0x7fffffff,
+ de->ino, de->d_type)) {
+ goto done;
+ }
+
+ reclen = sizeof(struct hack_dirent) + de->namlen;
+ size -= reclen;
+ curr_offset = de->offset /* & 0x7fffffff */;
+ de = (struct hack_dirent *)((char *)de + reclen);
+ }
+ }
+
+ done:
+ if (!error) {
+ if (size == 0)
+ filp->f_pos = offset & 0x7fffffff;
+ else if (de)
+ filp->f_pos = curr_offset;
+ }
+
+ kfree(buf.dirent);
+ return error;
+}
+#endif
STATIC int
xfs_file_mmap(
if ((count = bulkreq.icount) <= 0)
return -XFS_ERROR(EINVAL);
+ if (bulkreq.ubuffer == NULL)
+ return -XFS_ERROR(EINVAL);
+
if (cmd == XFS_IOC_FSINUMBERS)
error = xfs_inumbers(mp, &inlast, &count,
bulkreq.ubuffer, xfs_inumbers_fmt);
else if (cmd == XFS_IOC_FSBULKSTAT_SINGLE)
error = xfs_bulkstat_single(mp, &inlast,
bulkreq.ubuffer, &done);
- else { /* XFS_IOC_FSBULKSTAT */
- if (count == 1 && inlast != 0) {
- inlast++;
- error = xfs_bulkstat_single(mp, &inlast,
- bulkreq.ubuffer, &done);
- } else {
- error = xfs_bulkstat(mp, &inlast, &count,
- (bulkstat_one_pf)xfs_bulkstat_one, NULL,
- sizeof(xfs_bstat_t), bulkreq.ubuffer,
- BULKSTAT_FG_QUICK, &done);
- }
- }
+ else /* XFS_IOC_FSBULKSTAT */
+ error = xfs_bulkstat(mp, &inlast, &count,
+ (bulkstat_one_pf)xfs_bulkstat_one, NULL,
+ sizeof(xfs_bstat_t), bulkreq.ubuffer,
+ BULKSTAT_FG_QUICK, &done);
if (error)
return -error;
if ((count = bulkreq.icount) <= 0)
return -XFS_ERROR(EINVAL);
+ if (bulkreq.ubuffer == NULL)
+ return -XFS_ERROR(EINVAL);
+
if (cmd == XFS_IOC_FSINUMBERS)
error = xfs_inumbers(mp, &inlast, &count,
bulkreq.ubuffer, xfs_inumbers_fmt_compat);
*/
SYNCHRONIZE();
ip->i_update_core = 1;
- if (!(inode->i_state & I_SYNC))
+ if (!(inode->i_state & I_NEW))
mark_inode_dirty_sync(inode);
}
*/
SYNCHRONIZE();
ip->i_update_core = 1;
- if (!(inode->i_state & I_SYNC))
+ if (!(inode->i_state & I_NEW))
mark_inode_dirty_sync(inode);
}
boolean_t nowait;
int error;
+ if (! XFS_IS_QUOTA_ON(mp))
+ return 0;
+
restarts = 0;
/*
* We won't block unless we are asked to.
icl = NULL;
if (radix_tree_gang_lookup(&pag->pag_ici_root, (void**)&iq,
first_index, 1)) {
- if ((iq->i_ino & mask) == first_index)
+ if ((XFS_INO_TO_AGINO(mp, iq->i_ino) & mask) == first_index)
icl = iq->i_cluster;
}
return 1;
}
+#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
+
/*
* Return stat information in bulk (by-inode) for the filesystem.
*/
xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */
xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */
xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */
- xfs_ino_t lastino=0; /* last inode number returned */
+ xfs_ino_t lastino; /* last inode number returned */
int nbcluster; /* # of blocks in a cluster */
int nicluster; /* # of inodes in a cluster */
int nimask; /* mask for inode clusters */
* Get the last inode value, see if there's nothing to do.
*/
ino = (xfs_ino_t)*lastinop;
+ lastino = ino;
dip = NULL;
agno = XFS_INO_TO_AGNO(mp, ino);
agino = XFS_INO_TO_AGINO(mp, ino);
*ubcountp = 0;
return 0;
}
+ if (!ubcountp || *ubcountp <= 0) {
+ return EINVAL;
+ }
ubcount = *ubcountp; /* statstruct's */
ubleft = ubcount * statstruct_size; /* bytes */
*ubcountp = ubelem = 0;
* inode returned; 0 means start of the allocation group.
*/
rval = 0;
- while (ubleft >= statstruct_size && agno < mp->m_sb.sb_agcount) {
+ while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) {
+ cond_resched();
bp = NULL;
down_read(&mp->m_peraglock);
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
break;
error = xfs_inobt_lookup_ge(cur, agino, 0, 0,
&tmp);
+ cond_resched();
}
/*
* If ran off the end of the ag either with an error,
*/
agino = gino + XFS_INODES_PER_CHUNK;
error = xfs_inobt_increment(cur, 0, &tmp);
+ cond_resched();
}
/*
* Drop the btree buffers and the agi buffer.
*/
irbufend = irbp;
for (irbp = irbuf;
- irbp < irbufend && ubleft >= statstruct_size; irbp++) {
+ irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) {
/*
* Now process this chunk of inodes.
*/
for (agino = irbp->ir_startino, chunkidx = clustidx = 0;
- ubleft > 0 &&
+ XFS_BULKSTAT_UBLEFT(ubleft) &&
irbp->ir_freecount < XFS_INODES_PER_CHUNK;
chunkidx++, clustidx++, agino++) {
ASSERT(chunkidx < XFS_INODES_PER_CHUNK);
ubleft, private_data,
bno, &ubused, dip, &fmterror);
if (fmterror == BULKSTAT_RV_NOTHING) {
- if (error == EFAULT) {
- ubleft = 0;
- rval = error;
- break;
- }
- else if (error == ENOMEM)
+ if (error && error != ENOENT &&
+ error != EINVAL) {
ubleft = 0;
- else
- lastino = ino;
+ rval = error;
+ break;
+ }
+ lastino = ino;
continue;
}
if (fmterror == BULKSTAT_RV_GIVEUP) {
ubelem++;
lastino = ino;
}
+
+ cond_resched();
}
if (bp)
/*
* Set up for the next loop iteration.
*/
- if (ubleft > 0) {
+ if (XFS_BULKSTAT_UBLEFT(ubleft)) {
if (end_of_ag) {
agno++;
agino = 0;
- }
+ } else
+ agino = XFS_INO_TO_AGINO(mp, lastino);
} else
break;
}
*/
kmem_free(irbuf, irbsize);
*ubcountp = ubelem;
+ /*
+ * Found some inodes, return them now and return the error next time.
+ */
+ if (ubelem)
+ rval = 0;
if (agno >= mp->m_sb.sb_agcount) {
/*
* If we ran out of filesystem, mark lastino as off
struct acpi_processor_power {
struct cpuidle_device dev;
struct acpi_processor_cx *state;
- struct acpi_processor_cx *bm_state;
unsigned long bm_check_timestamp;
u32 default_state;
u32 bm_activity;
#include <linux/mtd/partitions.h>
#include <linux/device.h>
+#include <linux/i2c.h>
#include <linux/spi/spi.h>
/* USB Device */
extern void __init at91_add_device_nand(struct at91_nand_data *data);
/* I2C*/
-extern void __init at91_add_device_i2c(void);
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
*/
#define NR_IXP23XX_MACH_IRQS 32
-#define NR_IRQS NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS
+#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq))
#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
#define NR_FPGA_IRQS 24
-#define NR_IRQS IH_BOARD_BASE + NR_FPGA_IRQS
+#define NR_IRQS (IH_BOARD_BASE + NR_FPGA_IRQS)
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
#define PXA_IRQ(x) (x)
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */
#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
#endif
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
+#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
+#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
+#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
+#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
+#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
+#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
+#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
+#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
+#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
+#endif
+
#define PXA_GPIO_IRQ_BASE (64)
#define PXA_GPIO_IRQ_NUM (128)
#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X)
#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X)
#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X)
+#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X)
#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X)
#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X)
#include <asm/arch/mfp.h>
/* GPIO */
-#define GPIO46_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff)
#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff)
-#define MFPR_DEFAULT (0x0000)
+/*
+ * MFP register defaults to
+ * drive strength fast 3mA (010'b)
+ * edge detection logic disabled
+ * alternate function 0
+ */
+#define MFPR_DEFAULT (0x0840)
#define MFP_CFG(pin, af) \
((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af))
#define MFP_CFG_DRV(pin, af, drv) \
- ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+ ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\
((MFP_##drv) << 10) | (MFP_##af))
#define MFP_CFG_LPM(pin, af, lpm) \
- ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\
+ ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\
(((MFP_LPM_##lpm) & 0x3) << 7) |\
(((MFP_LPM_##lpm) & 0x4) << 12) |\
- (((MFP_LPM_##lpm) & 0x8) << 10))
+ (((MFP_LPM_##lpm) & 0x8) << 10) |\
+ (MFP_##af))
#define MFP_CFG_X(pin, af, drv, lpm) \
- ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+ ((MFP_PIN_##pin << 16) |\
+ (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\
((MFP_##drv) << 10) | (MFP_##af) |\
(((MFP_LPM_##lpm) & 0x3) << 7) |\
(((MFP_LPM_##lpm) & 0x4) << 12) |\
#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
-#define DRCMR(n) __REG2(0x40000100, (n)<<2)
+#define DRCMR(n) (*(((n) < 64) ? \
+ &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+ &__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
unsigned long pin_mosi;
unsigned long pin_miso;
+ int bus_num;
+
unsigned long board_size;
struct spi_board_info *board_info;
* flush with all configurations.
*/
extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
- struct page *page,
- unsigned long addr, int len);
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) do { \
- memcpy(dst, src, len); \
- flush_icache_user_range(vma, page, vaddr, len); \
-} while(0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
+extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long vaddr, void *dst, const void *src,
+ unsigned long len);
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst,
+ const void *src, unsigned long len)
+{
+ memcpy(dst, src, len);
+}
#endif /* __ASM_AVR32_CACHEFLUSH_H */
/*
- * AVR32 OCD Registers
+ * AVR32 OCD Interface and register definitions
*
- * Copyright (C) 2004-2006 Atmel Corporation
+ * Copyright (C) 2004-2007 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#ifndef __ASM_AVR32_OCD_H
#define __ASM_AVR32_OCD_H
-/* Debug Registers */
-#define DBGREG_DID 0
-#define DBGREG_DC 8
-#define DBGREG_DS 16
-#define DBGREG_RWCS 28
-#define DBGREG_RWA 36
-#define DBGREG_RWD 40
-#define DBGREG_WT 44
-#define DBGREG_DTC 52
-#define DBGREG_DTSA0 56
-#define DBGREG_DTSA1 60
-#define DBGREG_DTEA0 72
-#define DBGREG_DTEA1 76
-#define DBGREG_BWC0A 88
-#define DBGREG_BWC0B 92
-#define DBGREG_BWC1A 96
-#define DBGREG_BWC1B 100
-#define DBGREG_BWC2A 104
-#define DBGREG_BWC2B 108
-#define DBGREG_BWC3A 112
-#define DBGREG_BWC3B 116
-#define DBGREG_BWA0A 120
-#define DBGREG_BWA0B 124
-#define DBGREG_BWA1A 128
-#define DBGREG_BWA1B 132
-#define DBGREG_BWA2A 136
-#define DBGREG_BWA2B 140
-#define DBGREG_BWA3A 144
-#define DBGREG_BWA3B 148
-#define DBGREG_BWD3A 153
-#define DBGREG_BWD3B 156
-
-#define DBGREG_PID 284
-
-#define SABAH_OCD 0x01
-#define SABAH_ICACHE 0x02
-#define SABAH_MEM_CACHED 0x04
-#define SABAH_MEM_UNCACHED 0x05
-
-/* Fields in the Development Control register */
-#define DC_SS_BIT 8
-
-#define DC_SS (1 << DC_SS_BIT)
-#define DC_DBE (1 << 13)
-#define DC_RID (1 << 27)
-#define DC_ORP (1 << 28)
-#define DC_MM (1 << 29)
-#define DC_RES (1 << 30)
-
-/* Fields in the Development Status register */
-#define DS_SSS (1 << 0)
-#define DS_SWB (1 << 1)
-#define DS_HWB (1 << 2)
-#define DS_BP_SHIFT 8
-#define DS_BP_MASK (0xff << DS_BP_SHIFT)
-
-#define __mfdr(addr) \
-({ \
- register unsigned long value; \
- asm volatile("mfdr %0, %1" : "=r"(value) : "i"(addr)); \
- value; \
-})
-#define __mtdr(addr, value) \
- asm volatile("mtdr %0, %1" : : "i"(addr), "r"(value))
+/* OCD Register offsets. Abbreviations used below:
+ *
+ * BP Breakpoint
+ * Comm Communication
+ * DT Data Trace
+ * PC Program Counter
+ * PID Process ID
+ * R/W Read/Write
+ * WP Watchpoint
+ */
+#define OCD_DID 0x0000 /* Device ID */
+#define OCD_DC 0x0008 /* Development Control */
+#define OCD_DS 0x0010 /* Development Status */
+#define OCD_RWCS 0x001c /* R/W Access Control */
+#define OCD_RWA 0x0024 /* R/W Access Address */
+#define OCD_RWD 0x0028 /* R/W Access Data */
+#define OCD_WT 0x002c /* Watchpoint Trigger */
+#define OCD_DTC 0x0034 /* Data Trace Control */
+#define OCD_DTSA0 0x0038 /* DT Start Addr Channel 0 */
+#define OCD_DTSA1 0x003c /* DT Start Addr Channel 1 */
+#define OCD_DTEA0 0x0048 /* DT End Addr Channel 0 */
+#define OCD_DTEA1 0x004c /* DT End Addr Channel 1 */
+#define OCD_BWC0A 0x0058 /* PC BP/WP Control 0A */
+#define OCD_BWC0B 0x005c /* PC BP/WP Control 0B */
+#define OCD_BWC1A 0x0060 /* PC BP/WP Control 1A */
+#define OCD_BWC1B 0x0064 /* PC BP/WP Control 1B */
+#define OCD_BWC2A 0x0068 /* PC BP/WP Control 2A */
+#define OCD_BWC2B 0x006c /* PC BP/WP Control 2B */
+#define OCD_BWC3A 0x0070 /* Data BP/WP Control 3A */
+#define OCD_BWC3B 0x0074 /* Data BP/WP Control 3B */
+#define OCD_BWA0A 0x0078 /* PC BP/WP Address 0A */
+#define OCD_BWA0B 0x007c /* PC BP/WP Address 0B */
+#define OCD_BWA1A 0x0080 /* PC BP/WP Address 1A */
+#define OCD_BWA1B 0x0084 /* PC BP/WP Address 1B */
+#define OCD_BWA2A 0x0088 /* PC BP/WP Address 2A */
+#define OCD_BWA2B 0x008c /* PC BP/WP Address 2B */
+#define OCD_BWA3A 0x0090 /* Data BP/WP Address 3A */
+#define OCD_BWA3B 0x0094 /* Data BP/WP Address 3B */
+#define OCD_NXCFG 0x0100 /* Nexus Configuration */
+#define OCD_DINST 0x0104 /* Debug Instruction */
+#define OCD_DPC 0x0108 /* Debug Program Counter */
+#define OCD_CPUCM 0x010c /* CPU Control Mask */
+#define OCD_DCCPU 0x0110 /* Debug Comm CPU */
+#define OCD_DCEMU 0x0114 /* Debug Comm Emulator */
+#define OCD_DCSR 0x0118 /* Debug Comm Status */
+#define OCD_PID 0x011c /* Ownership Trace PID */
+#define OCD_EPC0 0x0120 /* Event Pair Control 0 */
+#define OCD_EPC1 0x0124 /* Event Pair Control 1 */
+#define OCD_EPC2 0x0128 /* Event Pair Control 2 */
+#define OCD_EPC3 0x012c /* Event Pair Control 3 */
+#define OCD_AXC 0x0130 /* AUX port Control */
+
+/* Bits in DID */
+#define OCD_DID_MID_START 1
+#define OCD_DID_MID_SIZE 11
+#define OCD_DID_PN_START 12
+#define OCD_DID_PN_SIZE 16
+#define OCD_DID_RN_START 28
+#define OCD_DID_RN_SIZE 4
+
+/* Bits in DC */
+#define OCD_DC_TM_START 0
+#define OCD_DC_TM_SIZE 2
+#define OCD_DC_EIC_START 3
+#define OCD_DC_EIC_SIZE 2
+#define OCD_DC_OVC_START 5
+#define OCD_DC_OVC_SIZE 3
+#define OCD_DC_SS_BIT 8
+#define OCD_DC_DBR_BIT 12
+#define OCD_DC_DBE_BIT 13
+#define OCD_DC_EOS_START 20
+#define OCD_DC_EOS_SIZE 2
+#define OCD_DC_SQA_BIT 22
+#define OCD_DC_IRP_BIT 23
+#define OCD_DC_IFM_BIT 24
+#define OCD_DC_TOZ_BIT 25
+#define OCD_DC_TSR_BIT 26
+#define OCD_DC_RID_BIT 27
+#define OCD_DC_ORP_BIT 28
+#define OCD_DC_MM_BIT 29
+#define OCD_DC_RES_BIT 30
+#define OCD_DC_ABORT_BIT 31
+
+/* Bits in DS */
+#define OCD_DS_SSS_BIT 0
+#define OCD_DS_SWB_BIT 1
+#define OCD_DS_HWB_BIT 2
+#define OCD_DS_HWE_BIT 3
+#define OCD_DS_STP_BIT 4
+#define OCD_DS_DBS_BIT 5
+#define OCD_DS_BP_START 8
+#define OCD_DS_BP_SIZE 8
+#define OCD_DS_INC_BIT 24
+#define OCD_DS_BOZ_BIT 25
+#define OCD_DS_DBA_BIT 26
+#define OCD_DS_EXB_BIT 27
+#define OCD_DS_NTBF_BIT 28
+
+/* Bits in RWCS */
+#define OCD_RWCS_DV_BIT 0
+#define OCD_RWCS_ERR_BIT 1
+#define OCD_RWCS_CNT_START 2
+#define OCD_RWCS_CNT_SIZE 14
+#define OCD_RWCS_CRC_BIT 19
+#define OCD_RWCS_NTBC_START 20
+#define OCD_RWCS_NTBC_SIZE 2
+#define OCD_RWCS_NTE_BIT 22
+#define OCD_RWCS_NTAP_BIT 23
+#define OCD_RWCS_WRAPPED_BIT 24
+#define OCD_RWCS_CCTRL_START 25
+#define OCD_RWCS_CCTRL_SIZE 2
+#define OCD_RWCS_SZ_START 27
+#define OCD_RWCS_SZ_SIZE 3
+#define OCD_RWCS_RW_BIT 30
+#define OCD_RWCS_AC_BIT 31
+
+/* Bits in RWA */
+#define OCD_RWA_RWA_START 0
+#define OCD_RWA_RWA_SIZE 32
+
+/* Bits in RWD */
+#define OCD_RWD_RWD_START 0
+#define OCD_RWD_RWD_SIZE 32
+
+/* Bits in WT */
+#define OCD_WT_DTE_START 20
+#define OCD_WT_DTE_SIZE 3
+#define OCD_WT_DTS_START 23
+#define OCD_WT_DTS_SIZE 3
+#define OCD_WT_PTE_START 26
+#define OCD_WT_PTE_SIZE 3
+#define OCD_WT_PTS_START 29
+#define OCD_WT_PTS_SIZE 3
+
+/* Bits in DTC */
+#define OCD_DTC_T0WP_BIT 0
+#define OCD_DTC_T1WP_BIT 1
+#define OCD_DTC_ASID0EN_BIT 2
+#define OCD_DTC_ASID0_START 3
+#define OCD_DTC_ASID0_SIZE 8
+#define OCD_DTC_ASID1EN_BIT 11
+#define OCD_DTC_ASID1_START 12
+#define OCD_DTC_ASID1_SIZE 8
+#define OCD_DTC_RWT1_START 28
+#define OCD_DTC_RWT1_SIZE 2
+#define OCD_DTC_RWT0_START 30
+#define OCD_DTC_RWT0_SIZE 2
+
+/* Bits in DTSA0 */
+#define OCD_DTSA0_DTSA_START 0
+#define OCD_DTSA0_DTSA_SIZE 32
+
+/* Bits in DTSA1 */
+#define OCD_DTSA1_DTSA_START 0
+#define OCD_DTSA1_DTSA_SIZE 32
+
+/* Bits in DTEA0 */
+#define OCD_DTEA0_DTEA_START 0
+#define OCD_DTEA0_DTEA_SIZE 32
+
+/* Bits in DTEA1 */
+#define OCD_DTEA1_DTEA_START 0
+#define OCD_DTEA1_DTEA_SIZE 32
+
+/* Bits in BWC0A */
+#define OCD_BWC0A_ASIDEN_BIT 0
+#define OCD_BWC0A_ASID_START 1
+#define OCD_BWC0A_ASID_SIZE 8
+#define OCD_BWC0A_EOC_BIT 14
+#define OCD_BWC0A_AME_BIT 25
+#define OCD_BWC0A_BWE_START 30
+#define OCD_BWC0A_BWE_SIZE 2
+
+/* Bits in BWC0B */
+#define OCD_BWC0B_ASIDEN_BIT 0
+#define OCD_BWC0B_ASID_START 1
+#define OCD_BWC0B_ASID_SIZE 8
+#define OCD_BWC0B_EOC_BIT 14
+#define OCD_BWC0B_AME_BIT 25
+#define OCD_BWC0B_BWE_START 30
+#define OCD_BWC0B_BWE_SIZE 2
+
+/* Bits in BWC1A */
+#define OCD_BWC1A_ASIDEN_BIT 0
+#define OCD_BWC1A_ASID_START 1
+#define OCD_BWC1A_ASID_SIZE 8
+#define OCD_BWC1A_EOC_BIT 14
+#define OCD_BWC1A_AME_BIT 25
+#define OCD_BWC1A_BWE_START 30
+#define OCD_BWC1A_BWE_SIZE 2
+
+/* Bits in BWC1B */
+#define OCD_BWC1B_ASIDEN_BIT 0
+#define OCD_BWC1B_ASID_START 1
+#define OCD_BWC1B_ASID_SIZE 8
+#define OCD_BWC1B_EOC_BIT 14
+#define OCD_BWC1B_AME_BIT 25
+#define OCD_BWC1B_BWE_START 30
+#define OCD_BWC1B_BWE_SIZE 2
+
+/* Bits in BWC2A */
+#define OCD_BWC2A_ASIDEN_BIT 0
+#define OCD_BWC2A_ASID_START 1
+#define OCD_BWC2A_ASID_SIZE 8
+#define OCD_BWC2A_EOC_BIT 14
+#define OCD_BWC2A_AMB_START 20
+#define OCD_BWC2A_AMB_SIZE 5
+#define OCD_BWC2A_AME_BIT 25
+#define OCD_BWC2A_BWE_START 30
+#define OCD_BWC2A_BWE_SIZE 2
+
+/* Bits in BWC2B */
+#define OCD_BWC2B_ASIDEN_BIT 0
+#define OCD_BWC2B_ASID_START 1
+#define OCD_BWC2B_ASID_SIZE 8
+#define OCD_BWC2B_EOC_BIT 14
+#define OCD_BWC2B_AME_BIT 25
+#define OCD_BWC2B_BWE_START 30
+#define OCD_BWC2B_BWE_SIZE 2
+
+/* Bits in BWC3A */
+#define OCD_BWC3A_ASIDEN_BIT 0
+#define OCD_BWC3A_ASID_START 1
+#define OCD_BWC3A_ASID_SIZE 8
+#define OCD_BWC3A_SIZE_START 9
+#define OCD_BWC3A_SIZE_SIZE 3
+#define OCD_BWC3A_EOC_BIT 14
+#define OCD_BWC3A_BWO_START 16
+#define OCD_BWC3A_BWO_SIZE 2
+#define OCD_BWC3A_BME_START 20
+#define OCD_BWC3A_BME_SIZE 4
+#define OCD_BWC3A_BRW_START 28
+#define OCD_BWC3A_BRW_SIZE 2
+#define OCD_BWC3A_BWE_START 30
+#define OCD_BWC3A_BWE_SIZE 2
+
+/* Bits in BWC3B */
+#define OCD_BWC3B_ASIDEN_BIT 0
+#define OCD_BWC3B_ASID_START 1
+#define OCD_BWC3B_ASID_SIZE 8
+#define OCD_BWC3B_SIZE_START 9
+#define OCD_BWC3B_SIZE_SIZE 3
+#define OCD_BWC3B_EOC_BIT 14
+#define OCD_BWC3B_BWO_START 16
+#define OCD_BWC3B_BWO_SIZE 2
+#define OCD_BWC3B_BME_START 20
+#define OCD_BWC3B_BME_SIZE 4
+#define OCD_BWC3B_BRW_START 28
+#define OCD_BWC3B_BRW_SIZE 2
+#define OCD_BWC3B_BWE_START 30
+#define OCD_BWC3B_BWE_SIZE 2
+
+/* Bits in BWA0A */
+#define OCD_BWA0A_BWA_START 0
+#define OCD_BWA0A_BWA_SIZE 32
+
+/* Bits in BWA0B */
+#define OCD_BWA0B_BWA_START 0
+#define OCD_BWA0B_BWA_SIZE 32
+
+/* Bits in BWA1A */
+#define OCD_BWA1A_BWA_START 0
+#define OCD_BWA1A_BWA_SIZE 32
+
+/* Bits in BWA1B */
+#define OCD_BWA1B_BWA_START 0
+#define OCD_BWA1B_BWA_SIZE 32
+
+/* Bits in BWA2A */
+#define OCD_BWA2A_BWA_START 0
+#define OCD_BWA2A_BWA_SIZE 32
+
+/* Bits in BWA2B */
+#define OCD_BWA2B_BWA_START 0
+#define OCD_BWA2B_BWA_SIZE 32
+
+/* Bits in BWA3A */
+#define OCD_BWA3A_BWA_START 0
+#define OCD_BWA3A_BWA_SIZE 32
+
+/* Bits in BWA3B */
+#define OCD_BWA3B_BWA_START 0
+#define OCD_BWA3B_BWA_SIZE 32
+
+/* Bits in NXCFG */
+#define OCD_NXCFG_NXARCH_START 0
+#define OCD_NXCFG_NXARCH_SIZE 4
+#define OCD_NXCFG_NXOCD_START 4
+#define OCD_NXCFG_NXOCD_SIZE 4
+#define OCD_NXCFG_NXPCB_START 8
+#define OCD_NXCFG_NXPCB_SIZE 4
+#define OCD_NXCFG_NXDB_START 12
+#define OCD_NXCFG_NXDB_SIZE 4
+#define OCD_NXCFG_MXMSEO_BIT 16
+#define OCD_NXCFG_NXMDO_START 17
+#define OCD_NXCFG_NXMDO_SIZE 4
+#define OCD_NXCFG_NXPT_BIT 21
+#define OCD_NXCFG_NXOT_BIT 22
+#define OCD_NXCFG_NXDWT_BIT 23
+#define OCD_NXCFG_NXDRT_BIT 24
+#define OCD_NXCFG_NXDTC_START 25
+#define OCD_NXCFG_NXDTC_SIZE 3
+#define OCD_NXCFG_NXDMA_BIT 28
+
+/* Bits in DINST */
+#define OCD_DINST_DINST_START 0
+#define OCD_DINST_DINST_SIZE 32
+
+/* Bits in CPUCM */
+#define OCD_CPUCM_BEM_BIT 1
+#define OCD_CPUCM_FEM_BIT 2
+#define OCD_CPUCM_REM_BIT 3
+#define OCD_CPUCM_IBEM_BIT 4
+#define OCD_CPUCM_IEEM_BIT 5
+
+/* Bits in DCCPU */
+#define OCD_DCCPU_DATA_START 0
+#define OCD_DCCPU_DATA_SIZE 32
+
+/* Bits in DCEMU */
+#define OCD_DCEMU_DATA_START 0
+#define OCD_DCEMU_DATA_SIZE 32
+
+/* Bits in DCSR */
+#define OCD_DCSR_CPUD_BIT 0
+#define OCD_DCSR_EMUD_BIT 1
+
+/* Bits in PID */
+#define OCD_PID_PROCESS_START 0
+#define OCD_PID_PROCESS_SIZE 32
+
+/* Bits in EPC0 */
+#define OCD_EPC0_RNG_START 0
+#define OCD_EPC0_RNG_SIZE 2
+#define OCD_EPC0_CE_BIT 4
+#define OCD_EPC0_ECNT_START 16
+#define OCD_EPC0_ECNT_SIZE 16
+
+/* Bits in EPC1 */
+#define OCD_EPC1_RNG_START 0
+#define OCD_EPC1_RNG_SIZE 2
+#define OCD_EPC1_ATB_BIT 5
+#define OCD_EPC1_AM_BIT 6
+
+/* Bits in EPC2 */
+#define OCD_EPC2_RNG_START 0
+#define OCD_EPC2_RNG_SIZE 2
+#define OCD_EPC2_DB_START 2
+#define OCD_EPC2_DB_SIZE 2
+
+/* Bits in EPC3 */
+#define OCD_EPC3_RNG_START 0
+#define OCD_EPC3_RNG_SIZE 2
+#define OCD_EPC3_DWE_BIT 2
+
+/* Bits in AXC */
+#define OCD_AXC_DIV_START 0
+#define OCD_AXC_DIV_SIZE 4
+#define OCD_AXC_AXE_BIT 8
+#define OCD_AXC_AXS_BIT 9
+#define OCD_AXC_DDR_BIT 10
+#define OCD_AXC_LS_BIT 11
+#define OCD_AXC_REX_BIT 12
+#define OCD_AXC_REXTEN_BIT 13
+
+/* Constants for DC:EIC */
+#define OCD_EIC_PROGRAM_AND_DATA_TRACE 0
+#define OCD_EIC_BREAKPOINT 1
+#define OCD_EIC_NOP 2
+
+/* Constants for DC:OVC */
+#define OCD_OVC_OVERRUN 0
+#define OCD_OVC_DELAY_CPU_BTM 1
+#define OCD_OVC_DELAY_CPU_DTM 2
+#define OCD_OVC_DELAY_CPU_BTM_DTM 3
+
+/* Constants for DC:EOS */
+#define OCD_EOS_NOP 0
+#define OCD_EOS_DEBUG_MODE 1
+#define OCD_EOS_BREAKPOINT_WATCHPOINT 2
+#define OCD_EOS_THQ 3
+
+/* Constants for RWCS:NTBC */
+#define OCD_NTBC_OVERWRITE 0
+#define OCD_NTBC_DISABLE 1
+#define OCD_NTBC_BREAKPOINT 2
+
+/* Constants for RWCS:CCTRL */
+#define OCD_CCTRL_AUTO 0
+#define OCD_CCTRL_CACHED 1
+#define OCD_CCTRL_UNCACHED 2
+
+/* Constants for RWCS:SZ */
+#define OCD_SZ_BYTE 0
+#define OCD_SZ_HALFWORD 1
+#define OCD_SZ_WORD 2
+
+/* Constants for WT:PTS */
+#define OCD_PTS_DISABLED 0
+#define OCD_PTS_PROGRAM_0B 1
+#define OCD_PTS_PROGRAM_1A 2
+#define OCD_PTS_PROGRAM_1B 3
+#define OCD_PTS_PROGRAM_2A 4
+#define OCD_PTS_PROGRAM_2B 5
+#define OCD_PTS_DATA_3A 6
+#define OCD_PTS_DATA_3B 7
+
+/* Constants for DTC:RWT1 */
+#define OCD_RWT1_NO_TRACE 0
+#define OCD_RWT1_DATA_READ 1
+#define OCD_RWT1_DATA_WRITE 2
+#define OCD_RWT1_DATA_READ_WRITE 3
+
+/* Constants for DTC:RWT0 */
+#define OCD_RWT0_NO_TRACE 0
+#define OCD_RWT0_DATA_READ 1
+#define OCD_RWT0_DATA_WRITE 2
+#define OCD_RWT0_DATA_READ_WRITE 3
+
+/* Constants for BWC0A:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC0B:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC1A:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC1B:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC2A:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC2B:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC3A:SIZE */
+#define OCD_SIZE_BYTE_ACCESS 4
+#define OCD_SIZE_HALFWORD_ACCESS 5
+#define OCD_SIZE_WORD_ACCESS 6
+#define OCD_SIZE_DOUBLE_WORD_ACCESS 7
+
+/* Constants for BWC3A:BRW */
+#define OCD_BRW_READ_BREAK 0
+#define OCD_BRW_WRITE_BREAK 1
+#define OCD_BRW_ANY_ACCES_BREAK 2
+
+/* Constants for BWC3A:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for BWC3B:SIZE */
+#define OCD_SIZE_BYTE_ACCESS 4
+#define OCD_SIZE_HALFWORD_ACCESS 5
+#define OCD_SIZE_WORD_ACCESS 6
+#define OCD_SIZE_DOUBLE_WORD_ACCESS 7
+
+/* Constants for BWC3B:BRW */
+#define OCD_BRW_READ_BREAK 0
+#define OCD_BRW_WRITE_BREAK 1
+#define OCD_BRW_ANY_ACCES_BREAK 2
+
+/* Constants for BWC3B:BWE */
+#define OCD_BWE_DISABLED 0
+#define OCD_BWE_BREAKPOINT_ENABLED 1
+#define OCD_BWE_WATCHPOINT_ENABLED 3
+
+/* Constants for EPC0:RNG */
+#define OCD_RNG_DISABLED 0
+#define OCD_RNG_EXCLUSIVE 1
+#define OCD_RNG_INCLUSIVE 2
+
+/* Constants for EPC1:RNG */
+#define OCD_RNG_DISABLED 0
+#define OCD_RNG_EXCLUSIVE 1
+#define OCD_RNG_INCLUSIVE 2
+
+/* Constants for EPC2:RNG */
+#define OCD_RNG_DISABLED 0
+#define OCD_RNG_EXCLUSIVE 1
+#define OCD_RNG_INCLUSIVE 2
+
+/* Constants for EPC2:DB */
+#define OCD_DB_DISABLED 0
+#define OCD_DB_CHAINED_B 1
+#define OCD_DB_CHAINED_A 2
+#define OCD_DB_AHAINED_A_AND_B 3
+
+/* Constants for EPC3:RNG */
+#define OCD_RNG_DISABLED 0
+#define OCD_RNG_EXCLUSIVE 1
+#define OCD_RNG_INCLUSIVE 2
+
+#ifndef __ASSEMBLER__
+
+/* Register access macros */
+static inline unsigned long __ocd_read(unsigned int reg)
+{
+ return __builtin_mfdr(reg);
+}
+
+static inline void __ocd_write(unsigned int reg, unsigned long value)
+{
+ __builtin_mtdr(reg, value);
+}
+
+#define ocd_read(reg) __ocd_read(OCD_##reg)
+#define ocd_write(reg, value) __ocd_write(OCD_##reg, value)
+
+#endif /* !__ASSEMBLER__ */
#endif /* __ASM_AVR32_OCD_H */
extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
struct pt_regs *regs, const char *log_lvl);
+#define task_pt_regs(p) \
+ ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
+
#define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc)
#define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp)
/*
* Status Register bits
*/
-#define SR_H 0x40000000
-#define SR_R 0x20000000
+#define SR_H 0x20000000
#define SR_J 0x10000000
#define SR_DM 0x08000000
#define SR_D 0x04000000
#define SR_I0M 0x00020000
#define SR_GM 0x00010000
-#define SR_H_BIT 30
-#define SR_R_BIT 29
+#define SR_H_BIT 29
#define SR_J_BIT 28
#define SR_DM_BIT 27
#define SR_D_BIT 26
#define SYSREG_I3M_SIZE 1
#define SYSREG_EM_OFFSET 21
#define SYSREG_EM_SIZE 1
+#define SYSREG_MODE_OFFSET 22
+#define SYSREG_MODE_SIZE 3
#define SYSREG_M0_OFFSET 22
#define SYSREG_M0_SIZE 1
#define SYSREG_M1_OFFSET 23
#include <asm/ocd.h>
#define finish_arch_switch(prev) \
do { \
- __mtdr(DBGREG_PID, prev->pid); \
- __mtdr(DBGREG_PID, current->pid); \
+ ocd_write(PID, prev->pid); \
+ ocd_write(PID, current->pid); \
} while(0)
#endif
unsigned long flags; /* low level flags */
__u32 cpu;
__s32 preempt_count; /* 0 => preemptable, <0 => BUG */
+ __u32 rar_saved; /* return address... */
+ __u32 rsr_saved; /* ...and status register
+ saved by debug handler
+ when setting up
+ trampoline */
struct restart_block restart_block;
__u8 supervisor_stack[0];
};
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
-#define TIF_BREAKPOINT 4 /* true if we should break after return */
-#define TIF_SINGLE_STEP 5 /* single step after next break */
+#define TIF_BREAKPOINT 4 /* enter monitor mode on return */
+#define TIF_SINGLE_STEP 5 /* single step in progress */
#define TIF_MEMDIE 6
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-#define _TIF_BREAKPOINT (1 << TIF_BREAKPOINT)
#define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP)
#define _TIF_MEMDIE (1 << TIF_MEMDIE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
-/* XXX: These two masks must never span more than 16 bits! */
+/* Note: The masks below must never span more than 16 bits! */
+
/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK 0x0000013e
+#define _TIF_WORK_MASK \
+ ((1 << TIF_SIGPENDING) \
+ | (1 << TIF_NEED_RESCHED) \
+ | (1 << TIF_POLLING_NRFLAG) \
+ | (1 << TIF_BREAKPOINT) \
+ | (1 << TIF_RESTORE_SIGMASK))
+
/* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK 0x0000013f
+#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
/* work to do on return from debug mode */
-#define _TIF_DBGWORK_MASK 0x0000017e
+#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
#endif /* __ASM_AVR32_THREAD_INFO_H */
extern unsigned long sclk_to_usecs(unsigned long sclk);
extern unsigned long usecs_to_sclk(unsigned long usecs);
-extern void dump_thread(struct pt_regs *regs, struct user *dump);
-extern void dump_bfin_regs(struct pt_regs *fp, void *retaddr);
+extern void dump_bfin_process(struct pt_regs *regs);
+extern void dump_bfin_mem(void *retaddr);
extern void dump_bfin_trace_buffer(void);
extern int init_arch_irq(void);
extern int read_iloc(void);
extern int bfin_console_init(void);
extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
extern void init_exception_vectors(void);
extern void init_dma(void);
extern void program_IAR(void);
struct bfin5xx_spi_master {
u16 num_chipselect;
u8 enable_dma;
+ u16 pin_req[4];
};
/* spi_board_info.controller_data for SPI slave devices,
u8 enable_dma;
u8 bits_per_word;
u8 cs_change_per_word;
- u8 cs_chg_udelay;
+ u16 cs_chg_udelay; /* Some devices require 16-bit delays */
};
#endif /* _SPI_CHANNEL_H_ */
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#ifndef __ASM_CPLBINIT_H__
+#define __ASM_CPLBINIT_H__
+
#include <asm/blackfin.h>
#include <asm/cplb.h>
u16 size;
};
-extern u_long icplb_table[MAX_CPLBS+1];
-extern u_long dcplb_table[MAX_CPLBS+1];
+extern u_long icplb_table[];
+extern u_long dcplb_table[];
/* Till here we are discussing about the static memory management model.
* However, the operating envoronments commonly define more CPLB
* This is how Page descriptor Table is implemented in uClinux/Blackfin.
*/
-#ifdef CONFIG_CPLB_SWITCH_TAB_L1
-extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
-extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
-
-#ifdef CONFIG_CPLB_INFO
-extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
-extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
-#endif /* CONFIG_CPLB_INFO */
-
-#else
-
-extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
-extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
-
+extern u_long ipdt_table[];
+extern u_long dpdt_table[];
#ifdef CONFIG_CPLB_INFO
-extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
-extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
-#endif /* CONFIG_CPLB_INFO */
-
-#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
+extern u_long ipdt_swapcount_table[];
+extern u_long dpdt_swapcount_table[];
+#endif
extern unsigned long reserved_mem_dcache_on;
extern unsigned long reserved_mem_icache_on;
extern void generate_cpl_tables(void);
+
+#endif
-#ifndef _BLACKFIN_DELAY_H
-#define _BLACKFIN_DELAY_H
-
-static inline void __delay(unsigned long loops)
-{
-
-/* FIXME: Currently the assembler doesn't recognize Loop Register Clobbers,
- uncomment this as soon those are implemented */
/*
- __asm__ __volatile__ ( "\t LSETUP (1f,1f) LC0= %0\n\t"
- "1:\t NOP;\n\t"
- : :"a" (loops)
- : "LT0","LB0","LC0");
+ * delay.h - delay functions
+ *
+ * Copyright (c) 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_DELAY_H__
+#define __ASM_DELAY_H__
-*/
+#include <asm/mach/anomaly.h>
- __asm__ __volatile__("[--SP] = LC0;\n\t"
- "[--SP] = LT0;\n\t"
- "[--SP] = LB0;\n\t"
- "LSETUP (1f,1f) LC0 = %0;\n\t"
- "1:\t NOP;\n\t"
- "LB0 = [SP++];\n\t"
- "LT0 = [SP++];\n\t"
- "LC0 = [SP++];\n"
- :
- :"a" (loops));
+static inline void __delay(unsigned long loops)
+{
+ if (ANOMALY_05000312) {
+ /* Interrupted loads to loop registers -> bad */
+ unsigned long tmp;
+ __asm__ __volatile__(
+ "[--SP] = LC0;"
+ "[--SP] = LT0;"
+ "[--SP] = LB0;"
+ "LSETUP (1f,1f) LC0 = %1;"
+ "1: NOP;"
+ /* We take advantage of the fact that LC0 is 0 at
+ * the end of the loop. Otherwise we'd need some
+ * NOPs after the CLI here.
+ */
+ "CLI %0;"
+ "LB0 = [SP++];"
+ "LT0 = [SP++];"
+ "LC0 = [SP++];"
+ "STI %0;"
+ : "=d" (tmp)
+ : "a" (loops)
+ );
+ } else
+ __asm__ __volatile__ (
+ "LSETUP(1f, 1f) LC0 = %0;"
+ "1: NOP;"
+ :
+ : "a" (loops)
+ : "LT0", "LB0", "LC0"
+ );
}
#include <linux/param.h> /* needed for HZ */
__delay(usecs * loops_per_jiffy / (1000000 / HZ));
}
-#endif /* defined(_BLACKFIN_DELAY_H) */
+#endif
extern void insb(unsigned long port, void *addr, unsigned long count);
extern void insw(unsigned long port, void *addr, unsigned long count);
extern void insl(unsigned long port, void *addr, unsigned long count);
+extern void insl_16(unsigned long port, void *addr, unsigned long count);
extern void dma_outsb(unsigned long port, const void *addr, unsigned short count);
extern void dma_outsw(unsigned long port, const void *addr, unsigned short count);
#define GPIO_IRQ_BASE IRQ_PF0
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PH15+1)
-#else
-#define NR_IRQS (SYS_IRQS+1)
-#endif
#define IVG7 7
#define IVG8 8
/* Boot ROM Memory */
#define BOOT_ROM_START 0xEF000000
+#define BOOT_ROM_LENGTH 0x8000
/* Level 1 Memory */
/* Scratch Pad Memory */
-#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
-#endif
#endif /* _MEM_MAP_527_H_ */
#define GPIO_IRQ_BASE IRQ_PF0
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF15+1)
-#else
-#define NR_IRQS SYS_IRQS
-#endif
#define IVG7 7
#define IVG8 8
-
/*
* File: include/asm-blackfin/mach-bf533/mem_map.h
* Based on:
/* Boot ROM Memory */
#define BOOT_ROM_START 0xEF000000
+#define BOOT_ROM_LENGTH 0x400
/* Level 1 Memory */
/* Scratch Pad Memory */
-#if defined(CONFIG_BF533) || defined(CONFIG_BF532) || defined(CONFIG_BF531)
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
-#endif
#endif /* _MEM_MAP_533_H_ */
#define P_SPORT0_DRPRI (P_DONTCARE)
#define P_SPI0_MOSI (P_DONTCARE)
-#define P_SPI0_MIS0 (P_DONTCARE)
+#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
#define GPIO_IRQ_BASE IRQ_PF0
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PH15+1)
-#else
-#define NR_IRQS (IRQ_UART1_ERROR+1)
-#endif
#define IVG7 7
#define IVG8 8
/* Boot ROM Memory */
#define BOOT_ROM_START 0xEF000000
+#define BOOT_ROM_LENGTH 0x800
/* Level 1 Memory */
/* Scratch Pad Memory */
-#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
-#endif
#endif /* _MEM_MAP_537_H_ */
#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
-#ifdef CONFIG_BF542
-#define CPU "BF542"
-#define CPUID 0x027c8000
-#endif
-#ifdef CONFIG_BF544
-#define CPU "BF544"
-#define CPUID 0x027c8000
-#endif
-#ifdef CONFIG_BF548
-#define CPU "BF548"
-#define CPUID 0x027c6000
-#endif
-#ifdef CONFIG_BF549
-#define CPU "BF549"
-#endif
-#ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#if defined(CONFIG_BF542)
+# define CPU "BF542"
+# define CPUID 0x027c8000
+#elif defined(CONFIG_BF544)
+# define CPU "BF544"
+# define CPUID 0x027c8000
+#elif defined(CONFIG_BF547)
+# define CPU "BF547"
+#elif defined(CONFIG_BF548)
+# define CPU "BF548"
+# define CPUID 0x027c6000
+#elif defined(CONFIG_BF549)
+# define CPU "BF549"
+#else
+# define CPU "UNKNOWN"
+# define CPUID 0x0
#endif
#endif /* __MACH_BF48_H__ */
/* Bit masks for HOST_STATUS */
-#define READY 0x1 /* DMA Ready */
+#define DMA_READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
#define COMPLETE 0x8 /* DMA Complete */
/* Bit masks for HOST_STATUS */
-#define READY 0x1 /* DMA Ready */
+#define DMA_READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
#define COMPLETE 0x8 /* DMA Complete */
#define RESTART 0x20 /* Work Unit Transitions */
#define DI_SEL 0x40 /* Data Interrupt Timing Select */
#define DI_EN 0x80 /* Data Interrupt Enable */
+
#define NDSIZE 0xf00 /* Flex Descriptor Size */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+
#define DMAFLOW 0xf000 /* Next Operation */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
#define GPIO_IRQ_BASE IRQ_PA0
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PJ15+1)
-#else
-#define NR_IRQS (SYS_IRQS+1)
-#endif
/* For compatibility reasons with existing code */
/* Boot ROM Memory */
#define BOOT_ROM_START 0xEF000000
+#define BOOT_ROM_LENGTH 0x1000
+
+/* L1 Instruction ROM */
+
+#define L1_ROM_START 0xFFA14000
+#define L1_ROM_LENGTH 0x10000
/* Level 1 Memory */
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE*/
+/* Level 2 Memory */
+#if !defined(CONFIG_BF542)
+# define L2_START 0xFEB00000
+# if defined(CONFIG_BF544)
+# define L2_LENGTH 0x10000
+# else
+# define L2_LENGTH 0x20000
+# endif
+#endif
+
/* Scratch Pad Memory */
-#if defined(CONFIG_BF54x)
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
-#endif
#endif/* _MEM_MAP_548_H_ */
#define SUPPORTED_REVID 0x3
#define OFFSET_(x) ((x) & 0x0000FFFF)
-#define L1_ISRAM 0xFFA00000
-#define L1_ISRAM_END 0xFFA04000
-#define DATA_BANKA_SRAM 0xFF800000
-#define DATA_BANKA_SRAM_END 0xFF804000
-#define DATA_BANKB_SRAM 0xFF900000
-#define DATA_BANKB_SRAM_END 0xFF904000
-#define L1_DSRAMA 0xFF800000
-#define L1_DSRAMA_END 0xFF804000
-#define L1_DSRAMB 0xFF900000
-#define L1_DSRAMB_END 0xFF904000
-#define L2_SRAM 0xFEB00000
-#define L2_SRAM_END 0xFEB20000
-#define AMB_FLASH 0x20000000
-#define AMB_FLASH_END 0x21000000
-#define AMB_FLASH_LENGTH 0x01000000
-#define L1_ISRAM_LENGTH 0x4000
-#define L1_DSRAMA_LENGTH 0x4000
-#define L1_DSRAMB_LENGTH 0x4000
-#define L2_SRAM_LENGTH 0x20000
/*some misc defines*/
#define IMASK_IVG15 0x8000
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
#define SWRST SICA_SWRST
#define SYSCR SICA_SYSCR
+#define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A)
#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A)
#define RESET_SOFTWARE (SWRST_OCCURRED)
#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* SWRST Mask */
-#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */
-#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */
-#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */
-#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */
-#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */
-#define SWRST_OCCURRED 0x00008000 /* SWRST Status */
+#define SYSTEM_RESET 0x0007 /* Initiates a system software reset */
+#define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */
+#define DOUBLE_FAULT_B 0x0010 /* Core B Double Fault Causes Reset */
+#define SWRST_DBL_FAULT_A 0x0800 /* SWRST Core A Double Fault */
+#define SWRST_DBL_FAULT_B 0x1000 /* SWRST Core B Double Fault */
+#define SWRST_WDT_B 0x2000 /* SWRST Watchdog B */
+#define SWRST_WDT_A 0x4000 /* SWRST Watchdog A */
+#define SWRST_OCCURRED 0x8000 /* SWRST Status */
/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
#define GPIO_IRQ_BASE IRQ_PF0
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF47 + 1)
-#else
-#define NR_IRQS SYS_IRQS
-#endif
#define IVG7 7
#define IVG8 8
#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */
#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START 0xEF000000
+#define BOOT_ROM_LENGTH 0x800
+
/* Level 1 Memory */
#ifdef CONFIG_BFIN_ICACHE
/* Scratch Pad Memory */
-#if defined(CONFIG_BF561)
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
-#endif
#endif /* _MEM_MAP_533_H_ */
#endif
#define bfin_read8(addr) ({ \
- uint8_t __v; \
+ uint32_t __v; \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"%0 = b[%1] (z);" \
__v; })
#define bfin_read16(addr) ({ \
- uint16_t __v; \
+ uint32_t __v; \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"%0 = w[%1] (z);" \
NOP_PAD_ANOMALY_05000198 \
"b[%0] = %1;" \
: \
- : "a" (addr), "d" (val) \
+ : "a" (addr), "d" ((uint8_t)(val)) \
: "memory" \
)
NOP_PAD_ANOMALY_05000198 \
"w[%0] = %1;" \
: \
- : "a" (addr), "d" (val) \
+ : "a" (addr), "d" ((uint16_t)(val)) \
: "memory" \
)
/* This handles the memory map.. */
-#ifdef CONFIG_BFIN
+#ifdef CONFIG_BLACKFIN
#define PAGE_OFFSET_RAW 0x00000000
#endif
#ifndef _BLACKFIN_STRING_H_
#define _BLACKFIN_STRING_H_
+#include <linux/types.h>
+
#ifdef __KERNEL__ /* only set these up for kernel code */
#define __HAVE_ARCH_STRCPY
#ifndef __ASSEMBLY__
-#define HWC_x2 "System MMR Error\nAn error occurred due to an invalid access to an System MMR location\nPossible reason: a 32-bit register is accessed with a 16-bit instruction,\nor a 16-bit register is accessed with a 32-bit instruction.\n"
-#define HWC_x3 "External Memory Addressing Error\n"
-#define HWC_x12 "Performance Monitor Overflow\n"
-#define HWC_x18 "RAISE 5 instruction\n Software issued a RAISE 5 instruction to invoke the Hardware\n"
-#define HWC_default "Reserved\n"
-
-#define EXC_0x03 "Application stack overflow\n - Please increase the stack size of the application using elf2flt -s option,\n and/or reduce the stack use of the application.\n"
-#define EXC_0x10 "Single step\n - When the processor is in single step mode, every instruction\n generates an exception. Primarily used for debugging.\n"
-#define EXC_0x11 "Exception caused by a trace buffer full condition\n - The processor takes this exception when the trace\n buffer overflows (only when enabled by the Trace Unit Control register).\n"
-#define EXC_0x21 "Undefined instruction\n - May be used to emulate instructions that are not defined for\n a particular processor implementation.\n"
-#define EXC_0x22 "Illegal instruction combination\n - See section for multi-issue rules in the ADSP-BF53x Blackfin\n Processor Instruction Set Reference.\n"
-#define EXC_0x23 "Data access CPLB protection violation\n - Attempted read or write to Supervisor resource,\n or illegal data memory access. \n"
-#define EXC_0x24 "Data access misaligned address violation\n - Attempted misaligned data memory or data cache access.\n"
-#define EXC_0x25 "Unrecoverable event\n - For example, an exception generated while processing a previous exception.\n"
-#define EXC_0x26 "Data access CPLB miss\n - Used by the MMU to signal a CPLB miss on a data access.\n"
-#define EXC_0x27 "Data access multiple CPLB hits\n - More than one CPLB entry matches data fetch address.\n"
-#define EXC_0x28 "Program Sequencer Exception caused by an emulation watchpoint match\n - There is a watchpoint match, and one of the EMUSW\n bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
-#define EXC_0x2A "Instruction fetch misaligned address violation\n - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch exception,\n the return address provided in RETX is the destination address which is misaligned, rather than the address of the offending instruction.\n"
-#define EXC_0x2B "CPLB protection violation\n - Illegal instruction fetch access (memory protection violation).\n"
-#define EXC_0x2C "Instruction fetch CPLB miss\n - CPLB miss on an instruction fetch.\n"
-#define EXC_0x2D "Instruction fetch multiple CPLB hits\n - More than one CPLB entry matches instruction fetch address.\n"
-#define EXC_0x2E "Illegal use of supervisor resource\n - Attempted to use a Supervisor register or instruction from User mode.\n Supervisor resources are registers and instructions that are reserved\n for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n only instructions.\n"
+#define HWC_x2(level) \
+ "System MMR Error\n" \
+ level " - An error occurred due to an invalid access to an System MMR location\n" \
+ level " Possible reason: a 32-bit register is accessed with a 16-bit instruction\n" \
+ level " or a 16-bit register is accessed with a 32-bit instruction.\n"
+#define HWC_x3(level) \
+ "External Memory Addressing Error\n"
+#define HWC_x12(level) \
+ "Performance Monitor Overflow\n"
+#define HWC_x18(level) \
+ "RAISE 5 instruction\n" \
+ level " Software issued a RAISE 5 instruction to invoke the Hardware\n"
+#define HWC_default(level) \
+ "Reserved\n"
+#define EXC_0x03(level) \
+ "Application stack overflow\n" \
+ level " - Please increase the stack size of the application using elf2flt -s option,\n" \
+ level " and/or reduce the stack use of the application.\n"
+#define EXC_0x10(level) \
+ "Single step\n" \
+ level " - When the processor is in single step mode, every instruction\n" \
+ level " generates an exception. Primarily used for debugging.\n"
+#define EXC_0x11(level) \
+ "Exception caused by a trace buffer full condition\n" \
+ level " - The processor takes this exception when the trace\n" \
+ level " buffer overflows (only when enabled by the Trace Unit Control register).\n"
+#define EXC_0x21(level) \
+ "Undefined instruction\n" \
+ level " - May be used to emulate instructions that are not defined for\n" \
+ level " a particular processor implementation.\n"
+#define EXC_0x22(level) \
+ "Illegal instruction combination\n" \
+ level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \
+ level " Processor Instruction Set Reference.\n"
+#define EXC_0x23(level) \
+ "Data access CPLB protection violation\n" \
+ level " - Attempted read or write to Supervisor resource,\n" \
+ level " or illegal data memory access. \n"
+#define EXC_0x24(level) \
+ "Data access misaligned address violation\n" \
+ level " - Attempted misaligned data memory or data cache access.\n"
+#define EXC_0x25(level) \
+ "Unrecoverable event\n" \
+ level " - For example, an exception generated while processing a previous exception.\n"
+#define EXC_0x26(level) \
+ "Data access CPLB miss\n" \
+ level " - Used by the MMU to signal a CPLB miss on a data access.\n"
+#define EXC_0x27(level) \
+ "Data access multiple CPLB hits\n" \
+ level " - More than one CPLB entry matches data fetch address.\n"
+#define EXC_0x28(level) \
+ "Program Sequencer Exception caused by an emulation watchpoint match\n" \
+ level " - There is a watchpoint match, and one of the EMUSW\n" \
+ level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
+#define EXC_0x2A(level) \
+ "Instruction fetch misaligned address violation\n" \
+ level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \
+ level " exception, the return address provided in RETX is the destination address which is\n" \
+ level " misaligned, rather than the address of the offending instruction.\n"
+#define EXC_0x2B(level) \
+ "CPLB protection violation\n" \
+ level " - Illegal instruction fetch access (memory protection violation).\n"
+#define EXC_0x2C(level) \
+ "Instruction fetch CPLB miss\n" \
+ level " - CPLB miss on an instruction fetch.\n"
+#define EXC_0x2D(level) \
+ "Instruction fetch multiple CPLB hits\n" \
+ level " - More than one CPLB entry matches instruction fetch address.\n"
+#define EXC_0x2E(level) \
+ "Illegal use of supervisor resource\n" \
+ level " - Attempted to use a Supervisor register or instruction from User mode.\n" \
+ level " Supervisor resources are registers and instructions that are reserved\n" \
+ level " for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \
+ level " only instructions.\n"
#endif /* __ASSEMBLY__ */
#endif /* _BFIN_TRAPS_H */
* then it defines them prior including asm-generic/resource.h. )
*/
-#define RLIMIT_CPU 0 /* CPU time in ms */
+#define RLIMIT_CPU 0 /* CPU time in sec */
#define RLIMIT_FSIZE 1 /* Maximum filesize */
#define RLIMIT_DATA 2 /* max data size */
#define RLIMIT_STACK 3 /* max stack size */
#ifndef _ASM_H8300_TIMEX_H
#define _ASM_H8300_TIMEX_H
-#define CLOCK_TICK_RATE CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */
+#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */
typedef unsigned long cycles_t;
extern short h8300_timer_count;
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
+#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
const char *acpi_get_sysname (void);
#else
#define iosapic_remove(gsi_base) (-EINVAL)
#endif /* CONFIG_HOTPLUG */
-extern int gsi_to_vector (unsigned int gsi);
extern int gsi_to_irq (unsigned int gsi);
extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
unsigned long trigger);
u16 eid, u16 id,
unsigned long polarity,
unsigned long trigger);
-extern unsigned int iosapic_version (char __iomem *addr);
#ifdef CONFIG_NUMA
extern void __devinit map_iosapic_to_node (unsigned int, int);
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
#define TIF_IRET 4 /* return with iret */
-#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
- /* 31..28 fault code */
-#define TIF_MEMDIE 17
+#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */
+#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 18 /* OOM killer killed process */
+#define TIF_FREEZE 19 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_IRET (1<<TIF_IRET)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
#define __NR_mq_getsetattr (__NR_mq_open+5)
#define __NR_kexec_load 283
#define __NR_waitid 284
+/* 285 is unused */
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+#define __NR_migrate_pages 294
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_fstatat64 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
+#define __NR_unshare 310
+#define __NR_set_robust_list 311
+#define __NR_get_robust_list 312
+#define __NR_splice 313
+#define __NR_sync_file_range 314
+#define __NR_tee 315
+#define __NR_vmsplice 316
+#define __NR_move_pages 317
+#define __NR_getcpu 318
+#define __NR_epoll_pwait 319
+#define __NR_utimensat 320
+#define __NR_signalfd 321
+#define __NR_timerfd 322
+#define __NR_eventfd 323
+#define __NR_fallocate 324
#ifdef __KERNEL__
-#define NR_syscalls 285
+#define NR_syscalls 325
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_STAT64
#define __ARCH_WANT_SYS_OLDUMOUNT
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __IGNORE_lchown
+#define __IGNORE_setuid
+#define __IGNORE_getuid
+#define __IGNORE_setgid
+#define __IGNORE_getgid
+#define __IGNORE_geteuid
+#define __IGNORE_getegid
+#define __IGNORE_fcntl
+#define __IGNORE_setreuid
+#define __IGNORE_setregid
+#define __IGNORE_getrlimit
+#define __IGNORE_getgroups
+#define __IGNORE_setgroups
+#define __IGNORE_select
+#define __IGNORE_mmap
+#define __IGNORE_fchown
+#define __IGNORE_setfsuid
+#define __IGNORE_setfsgid
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+#define __IGNORE_chown
+
/*
* "Conditional" syscalls
*
+++ /dev/null
-/*
- * 8253/8254 Programmable Interval Timer
- */
-
-#ifndef _8253PIT_H
-#define _8253PIT_H
-
-#define PIT_TICK_RATE 1193182UL
-
-#endif
#endif
#ifndef cpu_dcache_line_size
-#define cpu_dcache_line_size() current_cpu_data.dcache.linesz
+#define cpu_dcache_line_size() cpu_data[0].dcache.linesz
#endif
#ifndef cpu_icache_line_size
-#define cpu_icache_line_size() current_cpu_data.icache.linesz
+#define cpu_icache_line_size() cpu_data[0].icache.linesz
#endif
#ifndef cpu_scache_line_size
-#define cpu_scache_line_size() current_cpu_data.scache.linesz
+#define cpu_scache_line_size() cpu_data[0].scache.linesz
#endif
#endif /* __ASM_CPU_FEATURES_H */
#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000)
#endif
#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
+#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT))
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
"4: li %0, %6 \n" \
- " j 2b \n" \
+ " j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" "__UA_ADDR "\t1b, 4b \n" \
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
"4: li %0, %6 \n" \
- " j 2b \n" \
+ " j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" "__UA_ADDR "\t1b, 4b \n" \
}
#endif
-#endif
+#endif /* _ASM_FUTEX_H */
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_TICK_RATE 1193182UL
+
extern spinlock_t i8253_lock;
extern void setup_pit_timer(void);
* CPU interrupts are 0 ... 7
*/
- CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE,
+ CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE + 8,
/*
* MACE
/* Au1000 */
#ifdef CONFIG_SOC_AU1000
enum soc_au1000_ints {
- AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE,
+ AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1000_UART0_INT = AU1000_FIRST_INT,
AU1000_UART1_INT, /* au1000 */
AU1000_UART2_INT, /* au1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
enum soc_au1500_ints {
- AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE,
+ AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1500_UART0_INT = AU1500_FIRST_INT,
AU1000_PCI_INTA, /* au1500 */
AU1000_PCI_INTB, /* au1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
enum soc_au1100_ints {
- AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE,
+ AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1100_UART0_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
#ifdef CONFIG_SOC_AU1550
enum soc_au1550_ints {
- AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE,
+ AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1550_UART0_INT = AU1550_FIRST_INT,
AU1550_PCI_INTA,
AU1550_PCI_INTB,
#ifdef CONFIG_SOC_AU1200
enum soc_au1200_ints {
- AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE,
+ AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1200_UART0_INT = AU1200_FIRST_INT,
AU1200_SWT_INT,
AU1200_SD_INT,
#endif /* CONFIG_SOC_AU1200 */
-#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 0)
-#define AU1000_INTC0_INT_LAST (MIPS_CPU_IRQ_BASE + 31)
-#define AU1000_INTC1_INT_BASE (MIPS_CPU_IRQ_BASE + 32)
-#define AU1000_INTC1_INT_LAST (MIPS_CPU_IRQ_BASE + 63)
-#define AU1000_MAX_INTR (MIPS_CPU_IRQ_BASE + 63)
+#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32)
+#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
+
+#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
#define INTX 0xFF /* not valid */
/* Programmable Counters 0 and 1 */
#define NUM_AU1100_MMC_CONTROLLERS 2
-
-#define AU1100_SD_IRQ 2
+#if defined(CONFIG_SOC_AU1100)
+#define AU1100_SD_IRQ AU1100_SD_INT
+#elif defined(CONFIG_SOC_AU1200)
+#define AU1100_SD_IRQ AU1200_SD_INT
+#endif
#define SD0_BASE 0xB0600000
if (cpu_has_dsp) \
__save_dsp(prev); \
(last) = resume(prev, next, task_thread_info(next)); \
+} while (0)
+
+#define finish_arch_switch(prev) \
+do { \
if (cpu_has_dsp) \
__restore_dsp(current); \
if (cpu_has_userlocal) \
- write_c0_userlocal(task_thread_info(current)->tp_value);\
-} while(0)
+ write_c0_userlocal(current_thread_info()->tp_value); \
+} while (0)
static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
{
extern unsigned long ebase;
extern void per_cpu_trap_init(void);
-extern int stop_a_enabled;
-
/*
* See include/asm-ia64/system.h; prevents deadlock on SMP
* systems.
* Initialize the calling CPU's compare interrupt as clockevent device
*/
#ifdef CONFIG_CEVT_R4K
-extern void mips_clockevent_init(void);
+extern int mips_clockevent_init(void);
extern unsigned int __weak get_c0_compare_int(void);
#else
-static inline void mips_clockevent_init(void)
+static inline int mips_clockevent_init(void)
+{
+ return -ENXIO;
+}
+#endif
+
+/*
+ * Initialize the count register as a clocksource
+ */
+#ifdef CONFIG_CEVT_R4K
+extern void init_mips_clocksource(void);
+#else
+static inline void init_mips_clocksource(void)
{
}
#endif
void pdc_io_reset(void);
void pdc_io_reset_devices(void);
int pdc_iodc_getc(void);
-void pdc_iodc_putc(unsigned char c);
-void pdc_iodc_outc(unsigned char c);
+int pdc_iodc_print(unsigned char *str, unsigned count);
void pdc_printf(const char *fmt, ...);
void pdc_emergency_unlock(void);
#define PPC_MEMSTART 0
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#endif
+
#ifndef __ASSEMBLY__
/*
* The basic type of a PTE - 64 bits for those CPUs with > 32 bit
return PCI_DN(busdn)->phb;
}
-extern void pcibios_free_controller(struct pci_controller *phb);
extern void isa_bridge_find_early(struct pci_controller *hose);
pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary);
-/* Allocate a new PCI host bridge structure */
+/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *
pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
#ifdef CONFIG_PCI
extern unsigned long pci_address_to_pio(phys_addr_t address);
extern int pcibios_vaddr_is_ioport(void __iomem *address);
* entries per page directory level: our page-table tree is two-level, so
* we don't really have any PMD directory.
*/
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_SHIFT)
+#define PGD_TABLE_SIZE (sizeof(pgd_t) << (32 - PGDIR_SHIFT))
+#endif /* __ASSEMBLY__ */
+
#define PTRS_PER_PTE (1 << PTE_SHIFT)
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_process_vtime(struct task_struct *tsk);
-#else
-#define account_process_vtime(tsk) do { } while (0)
-#endif
-
#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
extern void calculate_steal_time(void);
extern void snapshot_timebases(void);
+#define account_process_vtime(tsk) account_process_tick(tsk, 0)
#else
#define calculate_steal_time() do { } while (0)
#define snapshot_timebases() do { } while (0)
+#define account_process_vtime(tsk) do { } while (0)
#endif
extern void secondary_cpu_time_init(void);
/* those additional ones don't have to be located anywhere
* special as they were not part of the original systemcfg
*/
+ __u32 dcache_block_size; /* L1 d-cache block size */
+ __u32 icache_block_size; /* L1 i-cache block size */
+ __u32 dcache_log_block_size; /* L1 d-cache log block size */
+ __u32 icache_log_block_size; /* L1 i-cache log block size */
__s32 wtom_clock_sec; /* Wall to monotonic clock */
__s32 wtom_clock_nsec;
__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */
__s32 wtom_clock_sec; /* Wall to monotonic clock */
__s32 wtom_clock_nsec;
__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+ __u32 dcache_block_size; /* L1 d-cache block size */
+ __u32 icache_block_size; /* L1 i-cache block size */
+ __u32 dcache_log_block_size; /* L1 d-cache log block size */
+ __u32 icache_log_block_size; /* L1 i-cache log block size */
};
#endif /* CONFIG_PPC64 */
#define arch_align_stack(x) (x)
+#ifdef CONFIG_TRACE_IRQFLAGS
+extern psw_t sysc_restore_trace_psw;
+extern psw_t io_restore_trace_psw;
+#endif
+
#endif /* __KERNEL__ */
#endif
extern void __flush_invalidate_region(void *start, int size);
#endif
-#ifdef CONFIG_CPU_SH4
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
extern void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len);
+#ifndef _ASM_X86_ACPI_H
+#define _ASM_X86_ACPI_H
+
#ifdef CONFIG_X86_32
# include "acpi_32.h"
#else
# include "acpi_64.h"
#endif
+
+#include <asm/processor.h>
+
+/*
+ * Check if the CPU can handle C2 and deeper
+ */
+static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
+{
+ /*
+ * Early models (<=5) of AMD Opterons are not supposed to go into
+ * C2 state.
+ *
+ * Steppings 0x0A and later are good
+ */
+ if (boot_cpu_data.x86 == 0x0F &&
+ boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86_model <= 0x05 &&
+ boot_cpu_data.x86_mask < 0x0A)
+ return 1;
+ else
+ return max_cstate;
+}
+
+#endif
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
+#define local_apic_timer_c2_ok 1
#endif /* !CONFIG_X86_LOCAL_APIC */
extern int hpet_force_user;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
+extern void hpet_disable(void);
extern unsigned long hpet_readl(unsigned long a);
extern void force_hpet_resume(void);
int acpi_register_gsi (u32 gsi, int triggering, int polarity);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+#ifdef CONFIG_X86_IO_APIC
+extern int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity);
+#else
+#define acpi_get_override_irq(bus, trigger, polarity) (-1)
+#endif
/*
* This function undoes the effect of one call to acpi_register_gsi().
* If this matches the last registration, any IRQ resources for gsi
#endif
/* */
+
+#ifdef CONFIG_CGROUP_CPUACCT
+SUBSYS(cpuacct)
+#endif
+
+/* */
+
struct kobject kobj;
struct completion kobj_unregister;
void *governor_data;
+ struct cpuidle_state *safe_state;
};
DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
~EXT2_DIR_ROUND)
#define EXT2_MAX_REC_LEN ((1<<16)-1)
-static inline ext2_fsblk_t
-ext2_group_first_block_no(struct super_block *sb, unsigned long group_no)
-{
- return group_no * (ext2_fsblk_t)EXT2_BLOCKS_PER_GROUP(sb) +
- le32_to_cpu(EXT2_SB(sb)->s_es->s_first_data_block);
-}
-
#endif /* _LINUX_EXT2_FS_H */
* - add lk_flags in fuse_lk_in
* - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
* - add blksize field to fuse_attr
+ * - add file flags field to fuse_read_in and fuse_write_in
*/
#include <asm/types.h>
__u32 size;
__u32 read_flags;
__u64 lock_owner;
+ __u32 flags;
+ __u32 padding;
};
#define FUSE_COMPAT_WRITE_IN_SIZE 24
__u32 size;
__u32 write_flags;
__u64 lock_owner;
+ __u32 flags;
+ __u32 padding;
};
struct fuse_write_out {
/* hashing types */
#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */
-#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ MAC) */
+#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */
+#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */
typedef struct ifbond {
__s32 bond_mode;
int max_desc; /* Max number of LRO descriptors */
int max_aggr; /* Max number of LRO packets to be aggregated */
+ int frag_align_pad; /* Padding required to properly align layer 3
+ * headers in generated skb when using frags */
+
struct net_lro_desc *lro_arr; /* Array of LRO descriptors */
/*
#define KEY_DOLLAR 0x1b2
#define KEY_EURO 0x1b3
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
/*
* Transaction's current state
* [no locking - only kjournald alters this]
+ * [j_list_lock] guards transition of a transaction into T_FINISHED
+ * state and subsequent call of __journal_drop_transaction()
* FIXME: needs barriers
* KLUDGE: [use j_state_lock]
*/
#define KDSKBDIACR 0x4B4B /* write kernel accent table */
struct kbdiacruc {
- __u32 diacr, base, result;
+ unsigned int diacr, base, result;
};
struct kbdiacrsuc {
unsigned int kb_cnt; /* number of entries in following array */
#include <linux/list.h>
#include <linux/spinlock.h>
+#include <linux/rwsem.h>
struct device;
/*
#ifdef CONFIG_LEDS_TRIGGERS
/* Protects the trigger data below */
- rwlock_t trigger_lock;
+ struct rw_semaphore trigger_lock;
struct led_trigger *trigger;
struct list_head trig_list;
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
+ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
extern void sata_print_link_status(struct ata_link *link);
extern void ata_port_probe(struct ata_port *);
-extern void __sata_phy_reset(struct ata_port *ap);
-extern void sata_phy_reset(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
extern int sata_set_spd(struct ata_link *link);
extern int sata_link_debounce(struct ata_link *link,
/*
* EH
*/
-extern void ata_eng_timeout(struct ata_port *ap);
-
extern void ata_port_schedule_eh(struct ata_port *ap);
extern int ata_link_abort(struct ata_link *link);
extern int ata_port_abort(struct ata_port *ap);
#include <linux/prio_tree.h>
#include <linux/debug_locks.h>
#include <linux/mm_types.h>
+#include <linux/security.h>
struct mempolicy;
struct anon_vma;
set_page_section(page, pfn_to_section_nr(pfn));
}
+/*
+ * If a hint addr is less than mmap_min_addr change hint to be as
+ * low as possible but still greater than mmap_min_addr
+ */
+static inline unsigned long round_hint_to_min(unsigned long hint)
+{
+#ifdef CONFIG_SECURITY
+ hint &= PAGE_MASK;
+ if (((void *)hint != NULL) &&
+ (hint < mmap_min_addr))
+ return PAGE_ALIGN(mmap_min_addr);
+#endif
+ return hint;
+}
+
/*
* Some inline functions in vmstat.h depend on page_zone()
*/
extern int nfs_wb_all(struct inode *inode);
extern int nfs_wb_nocommit(struct inode *inode);
extern int nfs_wb_page(struct inode *inode, struct page* page);
-extern int nfs_wb_page_priority(struct inode *inode, struct page* page, int how);
extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
extern int nfs_commit_inode(struct inode *, int);
#define PCI_DEVICE_ID_NVIDIA_NVENET_33 0x0761
#define PCI_DEVICE_ID_NVIDIA_NVENET_34 0x0762
#define PCI_DEVICE_ID_NVIDIA_NVENET_35 0x0763
+#define PCI_DEVICE_ID_NVIDIA_NVENET_36 0x0AB0
+#define PCI_DEVICE_ID_NVIDIA_NVENET_37 0x0AB1
+#define PCI_DEVICE_ID_NVIDIA_NVENET_38 0x0AB2
+#define PCI_DEVICE_ID_NVIDIA_NVENET_39 0x0AB3
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_TT128 0x9128
PHY_INTERFACE_MODE_RMII,
PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_RGMII_ID,
+ PHY_INTERFACE_MODE_RGMII_RXID,
+ PHY_INTERFACE_MODE_RGMII_TXID,
PHY_INTERFACE_MODE_RTBI
} phy_interface_t;
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
+void phy_device_free(struct phy_device *phydev);
extern struct bus_type mdio_bus_type;
#endif /* __PHY_H */
#include <linux/errno.h>
#include <linux/mod_devicetable.h>
-#define PNP_MAX_PORT 8
-#define PNP_MAX_MEM 4
+#define PNP_MAX_PORT 24
+#define PNP_MAX_MEM 12
#define PNP_MAX_IRQ 2
#define PNP_MAX_DMA 2
#define PNP_NAME_LEN 50
typedef int (write_proc_t)(struct file *file, const char __user *buffer,
unsigned long count, void *data);
typedef int (get_info_t)(char *, char **, off_t, int);
+typedef struct proc_dir_entry *(shadow_proc_t)(struct task_struct *task,
+ struct proc_dir_entry *pde);
struct proc_dir_entry {
unsigned int low_ino;
read_proc_t *read_proc;
write_proc_t *write_proc;
atomic_t count; /* use count */
- int deleted; /* delete flag */
int pde_users; /* number of callers into module in progress */
spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
struct completion *pde_unload_completion;
+ shadow_proc_t *shadow_proc;
};
struct kcore_list {
#define RTC_DEVICE_NAME_SIZE 20
struct rtc_task;
+/* flags */
+#define RTC_DEV_BUSY 0
+
struct rtc_device
{
struct device dev;
struct mutex ops_lock;
struct cdev char_dev;
- struct mutex char_lock;
+ unsigned long flags;
unsigned long irq_data;
spinlock_t irq_lock;
#define SG_MAGIC 0x87654321
+/*
+ * We overload the LSB of the page pointer to indicate whether it's
+ * a valid sg entry, or whether it points to the start of a new scatterlist.
+ * Those low bits are there for everyone! (thanks mason :-)
+ */
+#define sg_is_chain(sg) ((sg)->page_link & 0x01)
+#define sg_is_last(sg) ((sg)->page_link & 0x02)
+#define sg_chain_ptr(sg) \
+ ((struct scatterlist *) ((sg)->page_link & ~0x03))
+
/**
* sg_assign_page - Assign a given page to an SG entry
* @sg: SG entry
BUG_ON((unsigned long) page & 0x03);
#ifdef CONFIG_DEBUG_SG
BUG_ON(sg->sg_magic != SG_MAGIC);
+ BUG_ON(sg_is_chain(sg));
#endif
sg->page_link = page_link | (unsigned long) page;
}
sg->length = len;
}
-#define sg_page(sg) ((struct page *) ((sg)->page_link & ~0x3))
+static inline struct page *sg_page(struct scatterlist *sg)
+{
+#ifdef CONFIG_DEBUG_SG
+ BUG_ON(sg->sg_magic != SG_MAGIC);
+ BUG_ON(sg_is_chain(sg));
+#endif
+ return (struct page *)((sg)->page_link & ~0x3);
+}
/**
* sg_set_buf - Set sg entry to point at given data
sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
}
-/*
- * We overload the LSB of the page pointer to indicate whether it's
- * a valid sg entry, or whether it points to the start of a new scatterlist.
- * Those low bits are there for everyone! (thanks mason :-)
- */
-#define sg_is_chain(sg) ((sg)->page_link & 0x01)
-#define sg_is_last(sg) ((sg)->page_link & 0x02)
-#define sg_chain_ptr(sg) \
- ((struct scatterlist *) ((sg)->page_link & ~0x03))
-
/**
* sg_next - return the next scatterlist entry in a list
* @sg: The current sg entry
#ifndef ARCH_HAS_SG_CHAIN
BUG();
#endif
+
+ /*
+ * offset and length are unused for chain entry. Clear them.
+ */
+ prv->offset = 0;
+ prv->length = 0;
+
/*
* Set lowest bit to indicate a link pointer, and make sure to clear
* the termination bit if it happens to be set.
/* Attach to any functions which should be ignored in wchan output. */
#define __sched __attribute__((__section__(".sched.text")))
+
+/* Linker adds these: start and end of __sched functions */
+extern char __sched_text_start[], __sched_text_end[];
+
/* Is this address in the __sched functions? */
extern int in_sched_functions(unsigned long addr);
#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
+#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */
+
#ifdef __KERNEL__
extern struct screen_info screen_info;
#ifdef SUPPORT_SYSRQ
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, port->info->tty);
+ handle_sysrq(ch, port->info ? port->info->tty : NULL);
port->sysrq = 0;
return 1;
}
return __alloc_skb(size, priority, 1, -1);
}
-extern void kfree_skbmem(struct sk_buff *skb);
extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
extern struct sk_buff *skb_clone(struct sk_buff *skb,
gfp_t priority);
CTL_SLOTTABLE_TCP,
CTL_MIN_RESVPORT,
CTL_MAX_RESVPORT,
- CTL_SLOTTABLE_RDMA,
- CTL_RDMA_MAXINLINEREAD,
- CTL_RDMA_MAXINLINEWRITE,
- CTL_RDMA_WRITEPADDING,
- CTL_RDMA_MEMREG,
};
#endif /* _LINUX_SUNRPC_DEBUG_H_ */
#ifdef __KERNEL__
-/*
- * Socket transport setup operations
- */
-struct rpc_xprt *xs_setup_udp(struct xprt_create *args);
-struct rpc_xprt *xs_setup_tcp(struct xprt_create *args);
-
int init_socket_xprt(void);
void cleanup_socket_xprt(void);
CTL_ABI=9, /* Binary emulation */
CTL_CPU=10, /* CPU stuff (speed scaling, etc) */
CTL_ARLAN=254, /* arlan wireless driver */
- CTL_APPLDATA=2120, /* s390 appldata */
CTL_S390DBF=5677, /* s390 debug */
CTL_SUNRPC=7249, /* sunrpc debug */
CTL_PM=9899, /* frv power management */
VM_PANIC_ON_OOM=33, /* panic at out-of-memory */
VM_VDSO_ENABLED=34, /* map VDSO into new processes? */
VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */
-
- /* s390 vm cmm sysctls */
- VM_CMM_PAGES=1111,
- VM_CMM_TIMED_PAGES=1112,
- VM_CMM_TIMEOUT=1113,
};
#ifndef _LINUX_THREAD_INFO_H
#define _LINUX_THREAD_INFO_H
+#include <linux/types.h>
+
/*
- * System call restart block.
+ * System call restart block.
*/
struct restart_block {
long (*fn)(struct restart_block *);
- unsigned long arg0, arg1, arg2, arg3;
+ union {
+ struct {
+ unsigned long arg0, arg1, arg2, arg3;
+ };
+ /* For futex_wait */
+ struct {
+ u32 *uaddr;
+ u32 val;
+ u32 flags;
+ u64 time;
+ } futex;
+ };
};
extern long do_no_restart_syscall(struct restart_block *parm);
#define ADJ_TIMECONST 0x0020 /* pll time constant */
#define ADJ_TICK 0x4000 /* tick value */
#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
+#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
/* xntp 3.4 compatibility names */
#define MOD_OFFSET ADJ_OFFSET
* bound to */
enum usb_interface_condition condition; /* state of binding */
unsigned is_active:1; /* the interface is not suspended */
+ unsigned sysfs_files_created:1; /* the sysfs attributes exist */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
struct device dev; /* interface specific device info */
int start_frame;
int number_of_packets;
int error_count;
- unsigned int signr; /* signal to be sent on error, -1 if none should be sent */
+ unsigned int signr; /* signal to be sent on completion,
+ or 0 if none should be sent. */
void *usercontext;
struct usbdevfs_iso_packet_desc iso_frame_desc[0];
};
int videobuf_streamon(struct videobuf_queue *q);
int videobuf_streamoff(struct videobuf_queue *q);
+void videobuf_stop(struct videobuf_queue *q);
+
int videobuf_read_start(struct videobuf_queue *q);
void videobuf_read_stop(struct videobuf_queue *q);
ssize_t videobuf_read_stream(struct videobuf_queue *q,
do { if (ieee80211_debug_level & (level)) \
printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+static inline bool ieee80211_ratelimit_debug(u32 level)
+{
+ return (ieee80211_debug_level & level) && net_ratelimit();
+}
#else
#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+static inline bool ieee80211_ratelimit_debug(u32 level)
+{
+ return false;
+}
#endif /* CONFIG_IEEE80211_DEBUG */
/* escape_essid() is intended to be used in debug (and possibly error)
if (size > PAGE_SIZE)
vfree(hashinfo->ehash_locks);
else
-#else
- kfree(hashinfo->ehash_locks);
#endif
+ kfree(hashinfo->ehash_locks);
hashinfo->ehash_locks = NULL;
}
}
#define FTPPORT __constant_htons(21)
#define FTPDATA __constant_htons(20)
-/*
- * IPVS sysctl variables under the /proc/sys/net/ipv4/vs/
- */
-#define NET_IPV4_VS 21
-
-enum {
- NET_IPV4_VS_DEBUG_LEVEL=1,
- NET_IPV4_VS_AMEMTHRESH=2,
- NET_IPV4_VS_AMDROPRATE=3,
- NET_IPV4_VS_DROP_ENTRY=4,
- NET_IPV4_VS_DROP_PACKET=5,
- NET_IPV4_VS_SECURE_TCP=6,
- NET_IPV4_VS_TO_ES=7,
- NET_IPV4_VS_TO_SS=8,
- NET_IPV4_VS_TO_SR=9,
- NET_IPV4_VS_TO_FW=10,
- NET_IPV4_VS_TO_TW=11,
- NET_IPV4_VS_TO_CL=12,
- NET_IPV4_VS_TO_CW=13,
- NET_IPV4_VS_TO_LA=14,
- NET_IPV4_VS_TO_LI=15,
- NET_IPV4_VS_TO_SA=16,
- NET_IPV4_VS_TO_UDP=17,
- NET_IPV4_VS_TO_ICMP=18,
- NET_IPV4_VS_LBLC_EXPIRE=19,
- NET_IPV4_VS_LBLCR_EXPIRE=20,
- NET_IPV4_VS_CACHE_BYPASS=22,
- NET_IPV4_VS_EXPIRE_NODEST_CONN=23,
- NET_IPV4_VS_SYNC_THRESHOLD=24,
- NET_IPV4_VS_NAT_ICMP_SEND=25,
- NET_IPV4_VS_EXPIRE_QUIESCENT_TEMPLATE=26,
- NET_IPV4_VS_LAST
-};
-
/*
* TCP State Values
*/
extern int ip_rt_init(void);
extern void ip_rt_redirect(__be32 old_gw, __be32 dst, __be32 new_gw,
__be32 src, struct net_device *dev);
-extern void ip_rt_advice(struct rtable **rp, int advice);
extern void rt_cache_flush(int how);
extern int __ip_route_output_key(struct rtable **, const struct flowi *flp);
extern int ip_route_output_key(struct rtable **, struct flowi *flp);
SCTP_AUTH_HMAC_ID_RESERVED_0,
SCTP_AUTH_HMAC_ID_SHA1,
SCTP_AUTH_HMAC_ID_RESERVED_2,
- SCTP_AUTH_HMAC_ID_SHA256
+#if defined (CONFIG_CRYPTO_SHA256) || defined (CONFIG_CRYPTO_SHA256_MODULE)
+ SCTP_AUTH_HMAC_ID_SHA256,
+#endif
+ __SCTP_AUTH_HMAC_MAX
};
-#define SCTP_AUTH_HMAC_ID_MAX SCTP_AUTH_HMAC_ID_SHA256
-#define SCTP_AUTH_NUM_HMACS (SCTP_AUTH_HMAC_ID_SHA256 + 1)
+#define SCTP_AUTH_HMAC_ID_MAX __SCTP_AUTH_HMAC_MAX - 1
+#define SCTP_AUTH_NUM_HMACS __SCTP_AUTH_HMAC_MAX
#define SCTP_SHA1_SIG_SIZE 20
#define SCTP_SHA256_SIG_SIZE 32
const struct sctp_bind_addr *src,
sctp_scope_t scope, gfp_t gfp,
int flags);
+int sctp_bind_addr_dup(struct sctp_bind_addr *dest,
+ const struct sctp_bind_addr *src,
+ gfp_t gfp);
int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
__u8 use_as_src, gfp_t gfp);
int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *);
{
struct sk_buff *skb;
+ /* The TCP header must be at least 32-bit aligned. */
+ size = ALIGN(size, 4);
+
skb = alloc_skb_fclone(size + sk->sk_prot->max_header, gfp);
if (skb) {
skb->truesize += mem;
struct sock *sk)
{
__skb_insert(new, skb->prev, skb, &sk->sk_write_queue);
+
+ if (sk->sk_send_head == skb)
+ sk->sk_send_head = new;
}
static inline void tcp_unlink_write_queue(struct sk_buff *skb, struct sock *sk)
uint);
extern void starget_for_each_device(struct scsi_target *, void *,
void (*fn)(struct scsi_device *, void *));
+extern void __starget_for_each_device(struct scsi_target *, void *,
+ void (*fn)(struct scsi_device *,
+ void *));
/* only exposed to implement shost_for_each_device */
extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
/* include/version.h. Generated by alsa/ksync script. */
#define CONFIG_SND_VERSION "1.0.15"
-#define CONFIG_SND_DATE " (Tue Oct 23 06:09:18 2007 UTC)"
+#define CONFIG_SND_DATE " (Tue Nov 20 19:16:42 2007 UTC)"
endchoice
+config CGROUP_CPUACCT
+ bool "Simple CPU accounting cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a simple Resource Controller for monitoring the
+ total CPU consumed by the tasks in a cgroup
+
config SYSFS_DEPRECATED
bool "Create deprecated sysfs files"
default y
config UID16
bool "Enable 16-bit UID system calls" if EMBEDDED
- depends on ARM || BFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
+ depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
default y
help
This enables the legacy 16-bit UID syscall wrappers.
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
+ /*
+ * In case that a resume from disk is carried out by linuxrc or one of
+ * its children, we need to tell the freezer not to wait for us.
+ */
+ current->flags |= PF_FREEZER_SKIP;
+
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0)
- while (pid != sys_wait4(-1, NULL, 0, NULL)) {
- try_to_freeze();
+ while (pid != sys_wait4(-1, NULL, 0, NULL))
yield();
- }
+
+ current->flags &= ~PF_FREEZER_SKIP;
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
omqstat.mq_flags = filp->f_flags & O_NONBLOCK;
if (u_mqstat) {
ret = audit_mq_getsetattr(mqdes, &mqstat);
- if (ret != 0)
- goto out;
+ if (ret != 0) {
+ spin_unlock(&info->lock);
+ goto out_fput;
+ }
if (mqstat.mq_flags & O_NONBLOCK)
filp->f_flags |= O_NONBLOCK;
else
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING
- depends on ALPHA || ARM || BLACKFIN || X86_32 || IA64 || M32R || MIPS || PARISC || PPC || S390 || SUPERH || SPARC || X86_64
+ depends on PROFILING && !UML
+ depends on ARCH_SUPPORTS_OPROFILE || ALPHA || ARM || BLACKFIN || IA64 || M32R || PARISC || PPC || S390 || SUPERH || SPARC
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
config KPROBES
bool "Kprobes"
- depends on KALLSYMS && MODULES
+ depends on KALLSYMS && MODULES && !UML
depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32
help
Kprobes allows you to trap at almost any kernel address and
* The acct_process() call is the workhorse of the process
* accounting system. The struct acct is built here and then written
* into the accounting file. This function should only be called from
- * do_exit().
+ * do_exit() or when switching to a different output file.
*/
/*
int __user *stat_addr, struct rusage __user *ru)
{
int retval, exit_code;
- struct pid_namespace *ns;
+ pid_t pid;
if (!p->exit_code)
return 0;
* keep holding onto the tasklist_lock while we call getrusage and
* possibly take page faults for user memory.
*/
- ns = current->nsproxy->pid_ns;
+ pid = task_pid_nr_ns(p, current->nsproxy->pid_ns);
get_task_struct(p);
read_unlock(&tasklist_lock);
if (unlikely(noreap)) {
- pid_t pid = task_pid_nr_ns(p, ns);
uid_t uid = p->uid;
int why = (p->ptrace & PT_PTRACED) ? CLD_TRAPPED : CLD_STOPPED;
if (unlikely(!exit_code) || unlikely(p->exit_state))
goto bail_ref;
return wait_noreap_copyout(p, pid, uid,
- why, (exit_code << 8) | 0x7f,
+ why, exit_code,
infop, ru);
}
if (!retval && infop)
retval = put_user(exit_code, &infop->si_status);
if (!retval && infop)
- retval = put_user(task_pid_nr_ns(p, ns), &infop->si_pid);
+ retval = put_user(pid, &infop->si_pid);
if (!retval && infop)
retval = put_user(p->uid, &infop->si_uid);
if (!retval)
- retval = task_pid_nr_ns(p, ns);
+ retval = pid;
put_task_struct(p);
BUG_ON(!retval);
__ptrace_link(p, current->parent);
if (thread_group_leader(p)) {
- if (clone_flags & CLONE_NEWPID) {
+ if (clone_flags & CLONE_NEWPID)
p->nsproxy->pid_ns->child_reaper = p;
- p->signal->tty = NULL;
- set_task_pgrp(p, p->pid);
- set_task_session(p, p->pid);
- attach_pid(p, PIDTYPE_PGID, pid);
- attach_pid(p, PIDTYPE_SID, pid);
- } else {
- p->signal->tty = current->signal->tty;
- set_task_pgrp(p, task_pgrp_nr(current));
- set_task_session(p, task_session_nr(current));
- attach_pid(p, PIDTYPE_PGID,
- task_pgrp(current));
- attach_pid(p, PIDTYPE_SID,
- task_session(current));
- }
+ p->signal->tty = current->signal->tty;
+ set_task_pgrp(p, task_pgrp_nr(current));
+ set_task_session(p, task_session_nr(current));
+ attach_pid(p, PIDTYPE_PGID, task_pgrp(current));
+ attach_pid(p, PIDTYPE_SID, task_session(current));
list_add_tail_rcu(&p->tasks, &init_task.tasks);
__get_cpu_var(process_counts)++;
}
if (curval == -EFAULT)
ret = -EFAULT;
- if (curval != uval)
+ else if (curval != uval)
ret = -EINVAL;
if (ret) {
spin_unlock(&pi_state->pi_mutex.wait_lock);
/*
* In case we must use restart_block to restart a futex_wait,
- * we encode in the 'arg3' shared capability
+ * we encode in the 'flags' shared capability
*/
-#define ARG3_SHARED 1
+#define FLAGS_SHARED 1
static long futex_wait_restart(struct restart_block *restart);
struct restart_block *restart;
restart = ¤t_thread_info()->restart_block;
restart->fn = futex_wait_restart;
- restart->arg0 = (unsigned long)uaddr;
- restart->arg1 = (unsigned long)val;
- restart->arg2 = (unsigned long)abs_time;
- restart->arg3 = 0;
+ restart->futex.uaddr = (u32 *)uaddr;
+ restart->futex.val = val;
+ restart->futex.time = abs_time->tv64;
+ restart->futex.flags = 0;
+
if (fshared)
- restart->arg3 |= ARG3_SHARED;
+ restart->futex.flags |= FLAGS_SHARED;
return -ERESTART_RESTARTBLOCK;
}
static long futex_wait_restart(struct restart_block *restart)
{
- u32 __user *uaddr = (u32 __user *)restart->arg0;
- u32 val = (u32)restart->arg1;
- ktime_t *abs_time = (ktime_t *)restart->arg2;
+ u32 __user *uaddr = (u32 __user *)restart->futex.uaddr;
struct rw_semaphore *fshared = NULL;
+ ktime_t t;
+ t.tv64 = restart->futex.time;
restart->fn = do_no_restart_syscall;
- if (restart->arg3 & ARG3_SHARED)
+ if (restart->futex.flags & FLAGS_SHARED)
fshared = ¤t->mm->mmap_sem;
- return (long)futex_wait(uaddr, fshared, val, abs_time);
+ return (long)futex_wait(uaddr, fshared, restart->futex.val, &t);
}
#ifdef CONFIG_TIME_LOW_RES
tim = ktime_add(tim, base->resolution);
#endif
+ /*
+ * Careful here: User space might have asked for a
+ * very long sleep, so the add above might result in a
+ * negative number, which enqueues the timer in front
+ * of the queue.
+ */
+ if (tim.tv64 < 0)
+ tim.tv64 = KTIME_MAX;
}
timer->expires = tim;
/* These will be re-linked against their real values during the second link stage */
extern const unsigned long kallsyms_addresses[] __attribute__((weak));
-extern const unsigned long kallsyms_num_syms __attribute__((weak));
extern const u8 kallsyms_names[] __attribute__((weak));
+/* tell the compiler that the count isn't in the small data section if the arch
+ * has one (eg: FRV)
+ */
+extern const unsigned long kallsyms_num_syms
+__attribute__((weak, section(".rodata")));
+
extern const u8 kallsyms_token_table[] __attribute__((weak));
extern const u16 kallsyms_token_index[] __attribute__((weak));
if (!debug_locks)
return;
- if (irqs_disabled_flags(flags))
- DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled);
- else
- DEBUG_LOCKS_WARN_ON(!current->hardirqs_enabled);
+ if (irqs_disabled_flags(flags)) {
+ if (DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)) {
+ printk("possible reason: unannotated irqs-off.\n");
+ }
+ } else {
+ if (DEBUG_LOCKS_WARN_ON(!current->hardirqs_enabled)) {
+ printk("possible reason: unannotated irqs-on.\n");
+ }
+ }
/*
* We dont accurately track softirq state in e.g.
#endif
}
-static inline int in_range(const void *start, const void *addr, const void *end)
-{
- return addr >= start && addr <= end;
-}
-
static void
print_freed_lock_bug(struct task_struct *curr, const void *mem_from,
const void *mem_to, struct held_lock *hlock)
dump_stack();
}
+static inline int not_in_range(const void* mem_from, unsigned long mem_len,
+ const void* lock_from, unsigned long lock_len)
+{
+ return lock_from + lock_len <= mem_from ||
+ mem_from + mem_len <= lock_from;
+}
+
/*
* Called when kernel memory is freed (or unmapped), or if a lock
* is destroyed or reinitialized - this code checks whether there is
*/
void debug_check_no_locks_freed(const void *mem_from, unsigned long mem_len)
{
- const void *mem_to = mem_from + mem_len, *lock_from, *lock_to;
struct task_struct *curr = current;
struct held_lock *hlock;
unsigned long flags;
for (i = 0; i < curr->lockdep_depth; i++) {
hlock = curr->held_locks + i;
- lock_from = (void *)hlock->instance;
- lock_to = (void *)(hlock->instance + 1);
-
- if (!in_range(mem_from, lock_from, mem_to) &&
- !in_range(mem_from, lock_to, mem_to))
+ if (not_in_range(mem_from, mem_len, hlock->instance,
+ sizeof(*hlock->instance)))
continue;
- print_freed_lock_bug(curr, mem_from, mem_to, hlock);
+ print_freed_lock_bug(curr, mem_from, mem_from + mem_len, hlock);
break;
}
local_irq_restore(flags);
printk(" locked it.\n");
do_each_thread(g, p) {
+ /*
+ * It's not reliable to print a task's held locks
+ * if it's not sleeping (or if it's not the current
+ * task):
+ */
+ if (p->state == TASK_RUNNING && p != current)
+ continue;
if (p->lockdep_depth)
lockdep_print_held_locks(p);
if (!unlock)
}
EXPORT_SYMBOL(unregister_module_notifier);
-/* We require a truly strong try_module_get() */
+/* We require a truly strong try_module_get(): 0 means failure due to
+ ongoing or failed initialization etc. */
static inline int strong_try_module_get(struct module *mod)
{
if (mod && mod->state == MODULE_STATE_COMING)
ret = __find_symbol(name, &owner, &crc,
!(mod->taints & TAINT_PROPRIETARY_MODULE));
if (ret) {
- /* use_module can fail due to OOM, or module unloading */
+ /* use_module can fail due to OOM,
+ or module initialization or unloading */
if (!check_version(sechdrs, versindex, name, mod, crc) ||
!use_module(mod, owner))
ret = 0;
return ret;
}
-/* Change all symbols so that sh_value encodes the pointer directly. */
+/* Change all symbols so that st_value encodes the pointer directly. */
static int simplify_symbols(Elf_Shdr *sechdrs,
unsigned int symindex,
const char *strtab,
tg = container_of(task_subsys_state(p, cpu_cgroup_subsys_id),
struct task_group, css);
#else
- tg = &init_task_group;
+ tg = &init_task_group;
#endif
-
return tg;
}
#ifdef CONFIG_FAIR_GROUP_SCHED
struct rq *rq; /* cpu runqueue to which this cfs_rq is attached */
- /* leaf cfs_rqs are those that hold tasks (lowest schedulable entity in
+ /*
+ * leaf cfs_rqs are those that hold tasks (lowest schedulable entity in
* a hierarchy). Non-leaf lrqs hold other higher schedulable entities
* (like users, containers etc.)
*
* leaf_cfs_rq_list ties together list of leaf cfs_rq's in a cpu. This
* list is used during load balance.
*/
- struct list_head leaf_cfs_rq_list; /* Better name : task_cfs_rq_list? */
- struct task_group *tg; /* group that "owns" this runqueue */
+ struct list_head leaf_cfs_rq_list;
+ struct task_group *tg; /* group that "owns" this runqueue */
#endif
};
/* list of leaf cfs_rq on this cpu: */
struct list_head leaf_cfs_rq_list;
#endif
- struct rt_rq rt;
+ struct rt_rq rt;
/*
* This is part of a global counter where only the total sum
SCHED_FEAT_NEW_FAIR_SLEEPERS = 1,
SCHED_FEAT_WAKEUP_PREEMPT = 2,
SCHED_FEAT_START_DEBIT = 4,
- SCHED_FEAT_TREE_AVG = 8,
- SCHED_FEAT_APPROX_AVG = 16,
+ SCHED_FEAT_TREE_AVG = 8,
+ SCHED_FEAT_APPROX_AVG = 16,
};
const_debug unsigned int sysctl_sched_features =
local_irq_save(flags);
rq = cpu_rq(cpu);
- update_rq_clock(rq);
+ /*
+ * Only call sched_clock() if the scheduler has already been
+ * initialized (some code might call cpu_clock() very early):
+ */
+ if (rq->idle)
+ update_rq_clock(rq);
now = rq->clock;
local_irq_restore(flags);
/*
* task_rq_lock - lock the runqueue a given task resides on and disable
- * interrupts. Note the ordering: we can safely lookup the task_rq without
+ * interrupts. Note the ordering: we can safely lookup the task_rq without
* explicitly disabling preemption.
*/
static struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags)
* To aid in avoiding the subversion of "niceness" due to uneven distribution
* of tasks with abnormal "nice" values across CPUs the contribution that
* each task makes to its run queue's load is weighted according to its
- * scheduling class and "nice" value. For SCHED_NORMAL tasks this is just a
+ * scheduling class and "nice" value. For SCHED_NORMAL tasks this is just a
* scaled version of the new time slice allocation that they receive on time
* slice expiry etc.
*/
struct rq_iterator *iterator);
#endif
+#ifdef CONFIG_CGROUP_CPUACCT
+static void cpuacct_charge(struct task_struct *tsk, u64 cputime);
+#else
+static inline void cpuacct_charge(struct task_struct *tsk, u64 cputime) {}
+#endif
+
#include "sched_stats.h"
#include "sched_idletask.c"
#include "sched_fair.c"
* and do any other architecture-specific cleanup actions.
*
* Note that we may have delayed dropping an mm in context_switch(). If
- * so, we finish that here outside of the runqueue lock. (Doing it
+ * so, we finish that here outside of the runqueue lock. (Doing it
* with the lock held can cause deadlocks; see schedule() for
* details.)
*/
/*
* If dest_cpu is allowed for this process, migrate the task to it.
* This is accomplished by forcing the cpu_allowed mask to only
- * allow dest_cpu, which will force the cpu onto dest_cpu. Then
+ * allow dest_cpu, which will force the cpu onto dest_cpu. Then
* the cpu_allowed mask is restored.
*/
static void sched_migrate_task(struct task_struct *p, int dest_cpu)
* tasks around. Thus we look for the minimum possible imbalance.
* Negative imbalances (*we* are more loaded than anyone else) will
* be counted as no imbalance for these purposes -- we can't fix that
- * by pulling tasks to us. Be careful of negative numbers as they'll
+ * by pulling tasks to us. Be careful of negative numbers as they'll
* appear as very large values with unsigned longs.
*/
if (max_load <= busiest_load_per_task)
/*
* This condition is "impossible", if it occurs
- * we need to fix it. Originally reported by
+ * we need to fix it. Originally reported by
* Bjorn Helgaas on a 128-cpu setup.
*/
BUG_ON(busiest_rq == target_rq);
#ifdef CONFIG_NO_HZ
static struct {
atomic_t load_balancer;
- cpumask_t cpu_mask;
+ cpumask_t cpu_mask;
} nohz ____cacheline_aligned = {
.load_balancer = ATOMIC_INIT(-1),
.cpu_mask = CPU_MASK_NONE,
static inline void schedule_debug(struct task_struct *prev)
{
/*
- * Test if we are atomic. Since do_exit() needs to call into
+ * Test if we are atomic. Since do_exit() needs to call into
* schedule() atomically, we ignore that path for now.
* Otherwise, whine if we are scheduling when we should not be.
*/
#ifdef CONFIG_PREEMPT
/*
* this is the entry point to schedule() from in-kernel preemption
- * off of preempt_enable. Kernel preemptions off return from interrupt
+ * off of preempt_enable. Kernel preemptions off return from interrupt
* occur there and call schedule directly.
*/
asmlinkage void __sched preempt_schedule(void)
#endif
/*
* If there is a non-zero preempt_count or interrupts are disabled,
- * we do not want to preempt the current task. Just return..
+ * we do not want to preempt the current task. Just return..
*/
if (likely(ti->preempt_count || irqs_disabled()))
return;
EXPORT_SYMBOL(default_wake_function);
/*
- * The core wakeup function. Non-exclusive wakeups (nr_exclusive == 0) just
- * wake everything up. If it's an exclusive wakeup (nr_exclusive == small +ve
+ * The core wakeup function. Non-exclusive wakeups (nr_exclusive == 0) just
+ * wake everything up. If it's an exclusive wakeup (nr_exclusive == small +ve
* number) then we wake all the non-exclusive tasks and one exclusive task.
*
* There are circumstances in which we can try to wake a task which has already
- * started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
+ * started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
* zero in this (rare) case, and we handle it by continuing to scan the queue.
*/
static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
* @policy: new policy.
* @param: structure containing the new RT priority.
*/
-asmlinkage long sys_sched_setscheduler(pid_t pid, int policy,
- struct sched_param __user *param)
+asmlinkage long
+sys_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
{
/* negative values for policy are not valid */
if (policy < 0)
/*
* It is not safe to call set_cpus_allowed with the
- * tasklist_lock held. We will bump the task_struct's
+ * tasklist_lock held. We will bump the task_struct's
* usage count and then drop tasklist_lock.
*/
get_task_struct(p);
* cond_resched_lock() - if a reschedule is pending, drop the given lock,
* call schedule, and on return reacquire the lock.
*
- * This works OK both with and without CONFIG_PREEMPT. We do strange low-level
+ * This works OK both with and without CONFIG_PREEMPT. We do strange low-level
* operations here to prevent schedule() from being called twice (once via
* spin_unlock(), once by hand).
*/
EXPORT_SYMBOL(yield);
/*
- * This task is about to go to sleep on IO. Increment rq->nr_iowait so
+ * This task is about to go to sleep on IO. Increment rq->nr_iowait so
* that process accounting knows that this is a task in IO wait state.
*
* But don't do that if it is a deliberate, throttling IO wait (this task
if (retval)
goto out_unlock;
- if (p->policy == SCHED_FIFO)
- time_slice = 0;
- else if (p->policy == SCHED_RR)
+ /*
+ * Time slice is 0 for SCHED_FIFO tasks and for SCHED_OTHER
+ * tasks that are on an otherwise idle runqueue:
+ */
+ time_slice = 0;
+ if (p->policy == SCHED_RR) {
time_slice = DEF_TIMESLICE;
- else {
+ } else {
struct sched_entity *se = &p->se;
unsigned long flags;
struct rq *rq;
rq = task_rq_lock(p, &flags);
- time_slice = NS_TO_JIFFIES(sched_slice(cfs_rq_of(se), se));
+ if (rq->cfs.load.weight)
+ time_slice = NS_TO_JIFFIES(sched_slice(&rq->cfs, se));
task_rq_unlock(rq, &flags);
}
read_unlock(&tasklist_lock);
* is removed from the allowed bitmask.
*
* NOTE: the caller must have a valid reference to the task, the
- * task must not exit() & deallocate itself prematurely. The
+ * task must not exit() & deallocate itself prematurely. The
* call is not atomic; no spinlocks may be held.
*/
int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
EXPORT_SYMBOL_GPL(set_cpus_allowed);
/*
- * Move (not current) task off this cpu, onto dest cpu. We're doing
+ * Move (not current) task off this cpu, onto dest cpu. We're doing
* this because either it can't run here any more (set_cpus_allowed()
* away from this CPU, or CPU going down), or because we're
* attempting to rebalance this task on exec (sched_exec).
* Try to stay on the same cpuset, where the
* current cpuset may be a subset of all cpus.
* The cpuset_cpus_allowed_locked() variant of
- * cpuset_cpus_allowed() will not block. It must be
+ * cpuset_cpus_allowed() will not block. It must be
* called within calls to cpuset_lock/cpuset_unlock.
*/
rq = task_rq_lock(p, &flags);
* kernel threads (both mm NULL), since they never
* leave kernel.
*/
- if (p->mm && printk_ratelimit())
+ if (p->mm && printk_ratelimit()) {
printk(KERN_INFO "process %d (%s) no "
"longer affine to cpu%d\n",
- task_pid_nr(p), p->comm, dead_cpu);
+ task_pid_nr(p), p->comm, dead_cpu);
+ }
}
} while (!__migrate_task_irq(p, dead_cpu, dest_cpu));
}
/*
* Drop lock around migration; if someone else moves it,
- * that's OK. No task can be added to this CPU, so iteration is
+ * that's OK. No task can be added to this CPU, so iteration is
* fine.
*/
spin_unlock_irq(&rq->lock);
/*
* In the intermediate directories, both the child directory and
* procname are dynamically allocated and could fail but the mode
- * will always be set. In the lowest directory the names are
+ * will always be set. In the lowest directory the names are
* static strings and all have proc handlers.
*/
for (entry = *tablep; entry->mode; entry++) {
return table;
}
-static ctl_table * sd_alloc_ctl_cpu_table(int cpu)
+static ctl_table *sd_alloc_ctl_cpu_table(int cpu)
{
struct ctl_table *entry, *table;
struct sched_domain *sd;
case CPU_UP_CANCELED_FROZEN:
if (!cpu_rq(cpu)->migration_thread)
break;
- /* Unbind it from offline cpu so it can run. Fall thru. */
+ /* Unbind it from offline cpu so it can run. Fall thru. */
kthread_bind(cpu_rq(cpu)->migration_thread,
any_online_cpu(cpu_online_map));
kthread_stop(cpu_rq(cpu)->migration_thread);
migrate_nr_uninterruptible(rq);
BUG_ON(rq->nr_running != 0);
- /* No need to migrate the tasks: it was best-effort if
- * they didn't take sched_hotcpu_mutex. Just wake up
- * the requestors. */
+ /*
+ * No need to migrate the tasks: it was best-effort if
+ * they didn't take sched_hotcpu_mutex. Just wake up
+ * the requestors.
+ */
spin_lock_irq(&rq->lock);
while (!list_empty(&rq->migration_queue)) {
struct migration_req *req;
* @node: node whose sched_domain we're building
* @used_nodes: nodes already in the sched_domain
*
- * Find the next node to include in a given scheduling domain. Simply
+ * Find the next node to include in a given scheduling domain. Simply
* finds the closest node not already in the @used_nodes map.
*
* Should use nodemask_t.
* @node: node whose cpumask we're constructing
* @size: number of nodes to include in this span
*
- * Given a node, construct a good cpumask for its sched_domain to span. It
+ * Given a node, construct a good cpumask for its sched_domain to span. It
* should be one that prevents unnecessary balancing, but also spreads tasks
* out optimally.
*/
static DEFINE_PER_CPU(struct sched_domain, cpu_domains);
static DEFINE_PER_CPU(struct sched_group, sched_group_cpus);
-static int cpu_to_cpu_group(int cpu, const cpumask_t *cpu_map,
- struct sched_group **sg)
+static int
+cpu_to_cpu_group(int cpu, const cpumask_t *cpu_map, struct sched_group **sg)
{
if (sg)
*sg = &per_cpu(sched_group_cpus, cpu);
#endif
#if defined(CONFIG_SCHED_MC) && defined(CONFIG_SCHED_SMT)
-static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map,
- struct sched_group **sg)
+static int
+cpu_to_core_group(int cpu, const cpumask_t *cpu_map, struct sched_group **sg)
{
int group;
cpumask_t mask = per_cpu(cpu_sibling_map, cpu);
return group;
}
#elif defined(CONFIG_SCHED_MC)
-static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map,
- struct sched_group **sg)
+static int
+cpu_to_core_group(int cpu, const cpumask_t *cpu_map, struct sched_group **sg)
{
if (sg)
*sg = &per_cpu(sched_group_core, cpu);
static DEFINE_PER_CPU(struct sched_domain, phys_domains);
static DEFINE_PER_CPU(struct sched_group, sched_group_phys);
-static int cpu_to_phys_group(int cpu, const cpumask_t *cpu_map,
- struct sched_group **sg)
+static int
+cpu_to_phys_group(int cpu, const cpumask_t *cpu_map, struct sched_group **sg)
{
int group;
#ifdef CONFIG_SCHED_MC
* Allocate the per-node list of sched groups
*/
sched_group_nodes = kcalloc(MAX_NUMNODES, sizeof(struct sched_group *),
- GFP_KERNEL);
+ GFP_KERNEL);
if (!sched_group_nodes) {
printk(KERN_WARNING "Can not alloc sched group node list\n");
return -ENOMEM;
static cpumask_t fallback_doms;
/*
- * Set up scheduler domains and groups. Callers must hold the hotplug lock.
+ * Set up scheduler domains and groups. Callers must hold the hotplug lock.
* For now this just excludes isolated cpus, but could be used to
* exclude other special cases in the future.
*/
/*
* Partition sched domains as specified by the 'ndoms_new'
- * cpumasks in the array doms_new[] of cpumasks. This compares
+ * cpumasks in the array doms_new[] of cpumasks. This compares
* doms_new[] to the current sched domain partitioning, doms_cur[].
* It destroys each deleted domain and builds each new domain.
*
* 'doms_new' is an array of cpumask_t's of length 'ndoms_new'.
- * The masks don't intersect (don't overlap.) We should setup one
- * sched domain for each mask. CPUs not in any of the cpumasks will
- * not be load balanced. If the same cpumask appears both in the
+ * The masks don't intersect (don't overlap.) We should setup one
+ * sched domain for each mask. CPUs not in any of the cpumasks will
+ * not be load balanced. If the same cpumask appears both in the
* current 'doms_cur' domains and in the new 'doms_new', we can leave
* it as it is.
*
- * The passed in 'doms_new' should be kmalloc'd. This routine takes
- * ownership of it and will kfree it when done with it. If the caller
+ * The passed in 'doms_new' should be kmalloc'd. This routine takes
+ * ownership of it and will kfree it when done with it. If the caller
* failed the kmalloc call, then it can pass in doms_new == NULL,
* and partition_sched_domains() will fallback to the single partition
* 'fallback_doms'.
#endif
/*
- * Force a reinitialization of the sched domains hierarchy. The domains
+ * Force a reinitialization of the sched domains hierarchy. The domains
* and groups cannot be updated in place without racing with the balancing
* code, so we temporarily attach all running cpus to the NULL domain
* which will prevent rebalancing while the sched domains are recalculated.
int in_sched_functions(unsigned long addr)
{
- /* Linker adds these: start and end of __sched functions */
- extern char __sched_text_start[], __sched_text_end[];
-
return in_lock_functions(addr) ||
(addr >= (unsigned long)__sched_text_start
&& addr < (unsigned long)__sched_text_end);
* @p: the task pointer to set.
*
* Description: This function must only be used when non-maskable interrupts
- * are serviced on a separate stack. It allows the architecture to switch the
- * notion of the current task on a cpu in a non-blocking manner. This function
+ * are serviced on a separate stack. It allows the architecture to switch the
+ * notion of the current task on a cpu in a non-blocking manner. This function
* must be called with all CPU's synchronized, and interrupts disabled, the
* and caller must save the original value of the current task (see
* curr_task() above) and restore that value before reenabling interrupts and
return &tg->css;
}
-static void cpu_cgroup_destroy(struct cgroup_subsys *ss,
- struct cgroup *cgrp)
+static void
+cpu_cgroup_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp)
{
struct task_group *tg = cgroup_tg(cgrp);
sched_destroy_group(tg);
}
-static int cpu_cgroup_can_attach(struct cgroup_subsys *ss,
- struct cgroup *cgrp, struct task_struct *tsk)
+static int
+cpu_cgroup_can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+ struct task_struct *tsk)
{
/* We don't support RT-tasks being in separate groups */
if (tsk->sched_class != &fair_sched_class)
return (u64) tg->shares;
}
-static u64 cpu_usage_read(struct cgroup *cgrp, struct cftype *cft)
-{
- struct task_group *tg = cgroup_tg(cgrp);
- unsigned long flags;
- u64 res = 0;
- int i;
-
- for_each_possible_cpu(i) {
- /*
- * Lock to prevent races with updating 64-bit counters
- * on 32-bit arches.
- */
- spin_lock_irqsave(&cpu_rq(i)->lock, flags);
- res += tg->se[i]->sum_exec_runtime;
- spin_unlock_irqrestore(&cpu_rq(i)->lock, flags);
- }
- /* Convert from ns to ms */
- do_div(res, NSEC_PER_MSEC);
-
- return res;
-}
-
static struct cftype cpu_files[] = {
{
.name = "shares",
.read_uint = cpu_shares_read_uint,
.write_uint = cpu_shares_write_uint,
},
- {
- .name = "usage",
- .read_uint = cpu_usage_read,
- },
};
static int cpu_cgroup_populate(struct cgroup_subsys *ss, struct cgroup *cont)
};
#endif /* CONFIG_FAIR_CGROUP_SCHED */
+
+#ifdef CONFIG_CGROUP_CPUACCT
+
+/*
+ * CPU accounting code for task groups.
+ *
+ * Based on the work by Paul Menage (menage@google.com) and Balbir Singh
+ * (balbir@in.ibm.com).
+ */
+
+/* track cpu usage of a group of tasks */
+struct cpuacct {
+ struct cgroup_subsys_state css;
+ /* cpuusage holds pointer to a u64-type object on every cpu */
+ u64 *cpuusage;
+};
+
+struct cgroup_subsys cpuacct_subsys;
+
+/* return cpu accounting group corresponding to this container */
+static inline struct cpuacct *cgroup_ca(struct cgroup *cont)
+{
+ return container_of(cgroup_subsys_state(cont, cpuacct_subsys_id),
+ struct cpuacct, css);
+}
+
+/* return cpu accounting group to which this task belongs */
+static inline struct cpuacct *task_ca(struct task_struct *tsk)
+{
+ return container_of(task_subsys_state(tsk, cpuacct_subsys_id),
+ struct cpuacct, css);
+}
+
+/* create a new cpu accounting group */
+static struct cgroup_subsys_state *cpuacct_create(
+ struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ struct cpuacct *ca = kzalloc(sizeof(*ca), GFP_KERNEL);
+
+ if (!ca)
+ return ERR_PTR(-ENOMEM);
+
+ ca->cpuusage = alloc_percpu(u64);
+ if (!ca->cpuusage) {
+ kfree(ca);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ return &ca->css;
+}
+
+/* destroy an existing cpu accounting group */
+static void
+cpuacct_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ struct cpuacct *ca = cgroup_ca(cont);
+
+ free_percpu(ca->cpuusage);
+ kfree(ca);
+}
+
+/* return total cpu usage (in nanoseconds) of a group */
+static u64 cpuusage_read(struct cgroup *cont, struct cftype *cft)
+{
+ struct cpuacct *ca = cgroup_ca(cont);
+ u64 totalcpuusage = 0;
+ int i;
+
+ for_each_possible_cpu(i) {
+ u64 *cpuusage = percpu_ptr(ca->cpuusage, i);
+
+ /*
+ * Take rq->lock to make 64-bit addition safe on 32-bit
+ * platforms.
+ */
+ spin_lock_irq(&cpu_rq(i)->lock);
+ totalcpuusage += *cpuusage;
+ spin_unlock_irq(&cpu_rq(i)->lock);
+ }
+
+ return totalcpuusage;
+}
+
+static struct cftype files[] = {
+ {
+ .name = "usage",
+ .read_uint = cpuusage_read,
+ },
+};
+
+static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ return cgroup_add_files(cont, ss, files, ARRAY_SIZE(files));
+}
+
+/*
+ * charge this task's execution time to its accounting group.
+ *
+ * called with rq->lock held.
+ */
+static void cpuacct_charge(struct task_struct *tsk, u64 cputime)
+{
+ struct cpuacct *ca;
+
+ if (!cpuacct_subsys.active)
+ return;
+
+ ca = task_ca(tsk);
+ if (ca) {
+ u64 *cpuusage = percpu_ptr(ca->cpuusage, task_cpu(tsk));
+
+ *cpuusage += cputime;
+ }
+}
+
+struct cgroup_subsys cpuacct_subsys = {
+ .name = "cpuacct",
+ .create = cpuacct_create,
+ .destroy = cpuacct_destroy,
+ .populate = cpuacct_populate,
+ .subsys_id = cpuacct_subsys_id,
+};
+#endif /* CONFIG_CGROUP_CPUACCT */
u64 now = ktime_to_ns(ktime_get());
int cpu;
- SEQ_printf(m, "Sched Debug Version: v0.06-v22, %s %.*s\n",
+ SEQ_printf(m, "Sched Debug Version: v0.07, %s %.*s\n",
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
avg_atom = -1LL;
avg_per_cpu = p->se.sum_exec_runtime;
- if (p->se.nr_migrations)
- avg_per_cpu = div64_64(avg_per_cpu, p->se.nr_migrations);
- else
+ if (p->se.nr_migrations) {
+ avg_per_cpu = div64_64(avg_per_cpu,
+ p->se.nr_migrations);
+ } else {
avg_per_cpu = -1LL;
+ }
__PN(avg_atom);
__PN(avg_per_cpu);
/*
* Targeted preemption latency for CPU-bound tasks:
- * (default: 20ms * ilog(ncpus), units: nanoseconds)
+ * (default: 20ms * (1 + ilog(ncpus)), units: nanoseconds)
*
* NOTE: this latency value is not the same as the concept of
* 'timeslice length' - timeslices in CFS are of variable length
/*
* Minimal preemption granularity for CPU-bound tasks:
- * (default: 1 msec * ilog(ncpus), units: nanoseconds)
+ * (default: 4 msec * (1 + ilog(ncpus)), units: nanoseconds)
*/
-unsigned int sysctl_sched_min_granularity = 1000000ULL;
+unsigned int sysctl_sched_min_granularity = 4000000ULL;
/*
* is kept at sysctl_sched_latency / sysctl_sched_min_granularity
*/
-static unsigned int sched_nr_latency = 20;
+static unsigned int sched_nr_latency = 5;
/*
* After fork, child runs first. (default) If set to 0 then
/*
* SCHED_BATCH wake-up granularity.
- * (default: 10 msec * ilog(ncpus), units: nanoseconds)
+ * (default: 10 msec * (1 + ilog(ncpus)), units: nanoseconds)
*
* This option delays the preemption effects of decoupled workloads
* and reduces their over-scheduling. Synchronous workloads will still
/*
* SCHED_OTHER wake-up granularity.
- * (default: 10 msec * ilog(ncpus), units: nanoseconds)
+ * (default: 10 msec * (1 + ilog(ncpus)), units: nanoseconds)
*
* This option delays the preemption effects of decoupled workloads
* and reduces their over-scheduling. Synchronous workloads will still
__update_curr(cfs_rq, curr, delta_exec);
curr->exec_start = now;
+
+ if (entity_is_task(curr)) {
+ struct task_struct *curtask = task_of(curr);
+
+ cpuacct_charge(curtask, delta_exec);
+ }
}
static inline void
*/
static void yield_task_fair(struct rq *rq)
{
- struct cfs_rq *cfs_rq = task_cfs_rq(rq->curr);
- struct sched_entity *rightmost, *se = &rq->curr->se;
+ struct task_struct *curr = rq->curr;
+ struct cfs_rq *cfs_rq = task_cfs_rq(curr);
+ struct sched_entity *rightmost, *se = &curr->se;
/*
* Are we the only task in the tree?
if (unlikely(cfs_rq->nr_running == 1))
return;
- if (likely(!sysctl_sched_compat_yield)) {
+ if (likely(!sysctl_sched_compat_yield) && curr->policy != SCHED_BATCH) {
__update_rq_clock(rq);
/*
* Update run-time statistics of the 'current'.
curr->se.sum_exec_runtime += delta_exec;
curr->se.exec_start = rq->clock;
+ cpuacct_charge(curr, delta_exec);
}
static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup)
sd->lb_nobusyq[itype],
sd->lb_nobusyg[itype]);
}
- seq_printf(seq, " %u %u %u %u %u %u %u %u %u %u %u %u\n",
+ seq_printf(seq,
+ " %u %u %u %u %u %u %u %u %u %u %u %u\n",
sd->alb_count, sd->alb_failed, sd->alb_pushed,
sd->sbe_count, sd->sbe_balanced, sd->sbe_pushed,
sd->sbf_count, sd->sbf_balanced, sd->sbf_pushed,
void unregister_sysctl_table(struct ctl_table_header * header)
{
might_sleep();
+
+ if (header == NULL)
+ return;
+
spin_lock(&sysctl_lock);
start_unregistering(header);
spin_unlock(&sysctl_lock);
{ KERN_PTY, "pty", trans_pty_table },
{ KERN_NGROUPS_MAX, "ngroups_max" },
- { KERN_SPARC_SCONS_PWROFF, "scons_poweroff" },
+ { KERN_SPARC_SCONS_PWROFF, "scons-poweroff" },
{ KERN_HZ_TIMER, "hz_timer" },
{ KERN_UNKNOWN_NMI_PANIC, "unknown_nmi_panic" },
{ KERN_BOOTLOADER_TYPE, "bootloader_type" },
{ VM_PANIC_ON_OOM, "panic_on_oom" },
{ VM_VDSO_ENABLED, "vdso_enabled" },
{ VM_MIN_SLAB, "min_slab_ratio" },
- { VM_CMM_PAGES, "cmm_pages" },
- { VM_CMM_TIMED_PAGES, "cmm_timed_pages" },
- { VM_CMM_TIMEOUT, "cmm_timeout" },
{}
};
{}
};
-
-static struct trans_ctl_table trans_net_ipv4_vs_table[] = {
- { NET_IPV4_VS_AMEMTHRESH, "amemthresh" },
- { NET_IPV4_VS_DEBUG_LEVEL, "debug_level" },
- { NET_IPV4_VS_AMDROPRATE, "am_droprate" },
- { NET_IPV4_VS_DROP_ENTRY, "drop_entry" },
- { NET_IPV4_VS_DROP_PACKET, "drop_packet" },
- { NET_IPV4_VS_SECURE_TCP, "secure_tcp" },
- { NET_IPV4_VS_TO_ES, "timeout_established" },
- { NET_IPV4_VS_TO_SS, "timeout_synsent" },
- { NET_IPV4_VS_TO_SR, "timeout_synrecv" },
- { NET_IPV4_VS_TO_FW, "timeout_finwait" },
- { NET_IPV4_VS_TO_TW, "timeout_timewait" },
- { NET_IPV4_VS_TO_CL, "timeout_close" },
- { NET_IPV4_VS_TO_CW, "timeout_closewait" },
- { NET_IPV4_VS_TO_LA, "timeout_lastack" },
- { NET_IPV4_VS_TO_LI, "timeout_listen" },
- { NET_IPV4_VS_TO_SA, "timeout_synack" },
- { NET_IPV4_VS_TO_UDP, "timeout_udp" },
- { NET_IPV4_VS_TO_ICMP, "timeout_icmp" },
- { NET_IPV4_VS_CACHE_BYPASS, "cache_bypass" },
- { NET_IPV4_VS_EXPIRE_NODEST_CONN, "expire_nodest_conn" },
- { NET_IPV4_VS_EXPIRE_QUIESCENT_TEMPLATE, "expire_quiescent_template" },
- { NET_IPV4_VS_SYNC_THRESHOLD, "sync_threshold" },
- { NET_IPV4_VS_NAT_ICMP_SEND, "nat_icmp_send" },
- { NET_IPV4_VS_LBLC_EXPIRE, "lblc_expiration" },
- { NET_IPV4_VS_LBLCR_EXPIRE, "lblcr_expiration" },
- {}
-};
-
static struct trans_ctl_table trans_net_neigh_vars_table[] = {
{ NET_NEIGH_MCAST_SOLICIT, "mcast_solicit" },
{ NET_NEIGH_UCAST_SOLICIT, "ucast_solicit" },
{ NET_IPV4_ROUTE, "route", trans_net_ipv4_route_table },
/* NET_IPV4_FIB_HASH unused */
{ NET_IPV4_NETFILTER, "netfilter", trans_net_ipv4_netfilter_table },
- { NET_IPV4_VS, "vs", trans_net_ipv4_vs_table },
{ NET_IPV4_TCP_TIMESTAMPS, "tcp_timestamps" },
{ NET_IPV4_TCP_WINDOW_SCALING, "tcp_window_scaling" },
{}
};
-static struct trans_ctl_table trans_appldata_table[] = {
- { CTL_APPLDATA_TIMER, "timer" },
- { CTL_APPLDATA_INTERVAL, "interval" },
- { CTL_APPLDATA_OS, "os" },
- { CTL_APPLDATA_NET_SUM, "net_sum" },
- { CTL_APPLDATA_MEM, "mem" },
- {}
-
-};
-
static struct trans_ctl_table trans_s390dbf_table[] = {
{ 5678 /* CTL_S390DBF_STOPPABLE */, "debug_stoppable" },
{ 5679 /* CTL_S390DBF_ACTIVE */, "debug_active" },
{ CTL_ABI, "abi" },
/* CTL_CPU not used */
{ CTL_ARLAN, "arlan", trans_arlan_table },
- { CTL_APPLDATA, "appldata", trans_appldata_table },
{ CTL_S390DBF, "s390dbf", trans_s390dbf_table },
{ CTL_SUNRPC, "sunrpc", trans_sunrpc_table },
{ CTL_PM, "pm", trans_pm_table },
unsigned long long clc;
int64_t delta;
+ if (unlikely(expires.tv64 < 0)) {
+ WARN_ON_ONCE(1);
+ return -ETIME;
+ }
+
delta = ktime_to_ns(ktime_sub(expires, now));
if (delta <= 0)
/* Now we validate the data before disabling interrupts */
- if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
+ if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) {
/* singleshot must not be used with any other mode bits */
- if (txc->modes != ADJ_OFFSET_SINGLESHOT)
+ if (txc->modes != ADJ_OFFSET_SINGLESHOT &&
+ txc->modes != ADJ_OFFSET_SS_READ)
return -EINVAL;
+ }
if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
/* adjustment Offset limited to +- .512 seconds */
leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
result = TIME_ERROR;
- if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
+ if ((txc->modes == ADJ_OFFSET_SINGLESHOT) ||
+ (txc->modes == ADJ_OFFSET_SS_READ))
txc->offset = save_adjust;
else
txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
if (!ts->tick_stopped)
return;
+ touch_softlockup_watchdog();
+
cpu_clear(cpu, nohz_cpu_mask);
now = ktime_get();
struct user_struct *new;
new = kmem_cache_alloc(uid_cachep, GFP_KERNEL);
- if (!new)
+ if (!new) {
+ uids_mutex_unlock();
return NULL;
+ }
+
new->uid = uid;
atomic_set(&new->__count, 1);
atomic_set(&new->processes, 0);
if (alloc_uid_keyring(new, current) < 0) {
kmem_cache_free(uid_cachep, new);
+ uids_mutex_unlock();
return NULL;
}
key_put(new->uid_keyring);
key_put(new->session_keyring);
kmem_cache_free(uid_cachep, new);
+ uids_mutex_unlock();
return NULL;
}
static void *get_uts(ctl_table *table, int write)
{
char *which = table->data;
+ struct uts_namespace *uts_ns;
+
+ uts_ns = current->nsproxy->uts_ns;
+ which = (which - (char *)&init_uts_ns) + (char *)uts_ns;
if (!write)
down_read(&uts_sem);
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BFIN
+ depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BLACKFIN
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BFIN)
+ depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BLACKFIN)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
while (lx < (linebuflen - 1) && lx < (ascii_column - 1))
linebuf[lx++] = ' ';
for (j = 0; (j < rowsize) && (j < len) && (lx + 2) < linebuflen; j++)
- linebuf[lx++] = isprint(ptr[j]) ? ptr[j] : '.';
+ linebuf[lx++] = (isascii(ptr[j]) && isprint(ptr[j])) ? ptr[j]
+ : '.';
nil:
linebuf[lx++] = '\0';
}
struct kobject *temp_kobj;
temp_kobj = kset_find_obj(kobj->kset, new_name);
if (temp_kobj) {
- printk(KERN_WARNING "kobject '%s' can not be renamed "
- "to '%s' as '%s' is already in existance.\n",
+ printk(KERN_WARNING "kobject '%s' cannot be renamed "
+ "to '%s' as '%s' is already in existence.\n",
kobject_name(kobj), new_name, new_name);
kobject_put(temp_kobj);
return -EINVAL;
* 2 of the License, or (at your option) any later version.
*
* Authors: Thomas Graf <tgraf@suug.ch>
- * Pablo Neira Ayuso <pablo@eurodev.net>
+ * Pablo Neira Ayuso <pablo@netfilter.org>
*
* ==========================================================================
*
* the various search algorithms.
*
* Returns a new textsearch configuration according to the specified
- * parameters or a ERR_PTR().
+ * parameters or a ERR_PTR(). If a zero length pattern is passed, this
+ * function returns EINVAL.
*/
struct ts_config *textsearch_prepare(const char *algo, const void *pattern,
unsigned int len, gfp_t gfp_mask, int flags)
struct ts_config *conf;
struct ts_ops *ops;
+ if (len == 0)
+ return ERR_PTR(-EINVAL);
+
ops = lookup_ts_algo(algo);
#ifdef CONFIG_KMOD
/*
int bdi_init(struct backing_dev_info *bdi)
{
- int i, j;
+ int i;
int err;
for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
if (err) {
err:
- for (j = 0; j < i; j++)
+ while (i--)
percpu_counter_destroy(&bdi->bdi_stat[i]);
}
fault_in_pages_readable(buf, bytes);
kaddr = kmap_atomic(page, KM_USER0);
copied = bytes -
- __copy_from_user_inatomic_nocache(kaddr, buf, bytes);
+ __copy_from_user_inatomic_nocache(kaddr + offset, buf, bytes);
kunmap_atomic(kaddr, KM_USER0);
flush_dcache_page(page);
*/
pte = huge_pte_offset(mm, vaddr & HPAGE_MASK);
- if (!pte || pte_none(*pte)) {
+ if (!pte || pte_none(*pte) || (write && !pte_write(*pte))) {
int ret;
spin_unlock(&mm->page_table_lock);
if (!len)
return -EINVAL;
+ if (!(flags & MAP_FIXED))
+ addr = round_hint_to_min(addr);
+
error = arch_mmap_check(addr, len, flags);
if (error)
return error;
*/
if (unlikely(anon_vma_prepare(vma)))
return -ENOMEM;
+
+ address &= PAGE_MASK;
+ error = security_file_mmap(0, 0, 0, 0, address, 1);
+ if (error)
+ return error;
+
anon_vma_lock(vma);
/*
* is required to hold the mmap_sem in read mode. We need the
* anon_vma lock to serialize against concurrent expand_stacks.
*/
- address &= PAGE_MASK;
- error = 0;
/* Somebody else might have raced and expanded it already */
if (address < vma->vm_start) {
if (is_hugepage_only_range(mm, addr, len))
return -EINVAL;
+ error = security_file_mmap(0, 0, 0, 0, addr, 1);
+ if (error)
+ return error;
+
flags = VM_DATA_DEFAULT_FLAGS | VM_ACCOUNT | mm->def_flags;
error = arch_mmap_check(addr, len, flags);
void *result;
int ret;
+ if (!(flags & MAP_FIXED))
+ addr = round_hint_to_min(addr);
+
/* decide whether we should attempt the mapping, and if so what sort of
* mapping */
ret = validate_mmap_request(file, addr, len, prot, flags, pgoff,
{
int i;
- VM_BUG_ON((gfp_flags & (__GFP_WAIT | __GFP_HIGHMEM)) == __GFP_HIGHMEM);
/*
* clear_highpage() will use KM_USER0, so it's a bug to use __GFP_ZERO
* and __GFP_HIGHMEM from hard or soft interrupt context.
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
+
+/* Return a sensible default order for the pageblock size. */
+static inline int pageblock_default_order(void)
+{
+ if (HPAGE_SHIFT > PAGE_SHIFT)
+ return HUGETLB_PAGE_ORDER;
+
+ return MAX_ORDER-1;
+}
+
/* Initialise the number of pages represented by NR_PAGEBLOCK_BITS */
static inline void __init set_pageblock_order(unsigned int order)
{
}
#else /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
-/* Defined this way to avoid accidently referencing HUGETLB_PAGE_ORDER */
+/*
+ * When CONFIG_HUGETLB_PAGE_SIZE_VARIABLE is not set, set_pageblock_order()
+ * and pageblock_default_order() are unused as pageblock_order is set
+ * at compile-time. See include/linux/pageblock-flags.h for the values of
+ * pageblock_order based on the kernel config
+ */
+static inline int pageblock_default_order(unsigned int order)
+{
+ return MAX_ORDER-1;
+}
#define set_pageblock_order(x) do {} while (0)
#endif /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
if (!size)
continue;
- set_pageblock_order(HUGETLB_PAGE_ORDER);
+ set_pageblock_order(pageblock_default_order());
setup_usemap(pgdat, zone, size);
ret = init_currently_empty_zone(zone, zone_start_pfn,
size, MEMMAP_EARLY);
if (page_mapped(page)) {
struct address_space *mapping = page_mapping(page);
- if (mapping)
+ if (mapping) {
ret = page_mkclean_file(mapping, page);
- if (page_test_dirty(page)) {
- page_clear_dirty(page);
- ret = 1;
+ if (page_test_dirty(page)) {
+ page_clear_dirty(page);
+ ret = 1;
+ }
}
}
pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, idx);
pvma.vm_pgoff = idx;
pvma.vm_end = PAGE_SIZE;
- page = alloc_page_vma(gfp | __GFP_ZERO, &pvma, 0);
+ page = alloc_page_vma(gfp, &pvma, 0);
mpol_free(pvma.vm_policy);
return page;
}
static inline struct page *
shmem_alloc_page(gfp_t gfp,struct shmem_inode_info *info, unsigned long idx)
{
- return alloc_page(gfp | __GFP_ZERO);
+ return alloc_page(gfp);
}
#endif
info->alloced++;
spin_unlock(&info->lock);
+ clear_highpage(filepage);
flush_dcache_page(filepage);
SetPageUptodate(filepage);
}
unsigned int objnr;
struct slab *slabp;
+ BUG_ON(virt_to_cache(objp) != cachep);
+
objp -= obj_offset(cachep);
kfree_debugcheck(objp);
page = virt_to_head_page(objp);
{
unsigned long flags;
- BUG_ON(virt_to_cache(objp) != cachep);
-
local_irq_save(flags);
debug_check_no_locks_freed(objp, obj_size(cachep));
__cache_free(cachep, objp);
return obj_size(virt_to_cache(objp));
}
+EXPORT_SYMBOL(ksize);
/* Not enough space: must allocate a new page */
if (!b) {
- b = slob_new_page(gfp, 0, node);
+ b = slob_new_page(gfp & ~__GFP_ZERO, 0, node);
if (!b)
return 0;
sp = (struct slob_page *)virt_to_page(b);
else
return sp->page.private;
}
+EXPORT_SYMBOL(ksize);
struct kmem_cache {
unsigned int size, align;
void **object;
struct page *new;
+ /* We handle __GFP_ZERO in the caller */
+ gfpflags &= ~__GFP_ZERO;
+
if (!c->page)
goto new_slab;
if (unlikely(object == ZERO_SIZE_PTR))
return 0;
- page = get_object_page(object);
+ page = virt_to_head_page(object);
BUG_ON(!page);
+
+ if (unlikely(!PageSlab(page)))
+ return PAGE_SIZE << compound_order(page);
+
s = page->slab;
BUG_ON(!s);
* or to back the page tables that are used to create the mapping.
* Uses the main allocators if they are available, else bootmem.
*/
+
+static void * __init_refok __earlyonly_bootmem_alloc(int node,
+ unsigned long size,
+ unsigned long align,
+ unsigned long goal)
+{
+ return __alloc_bootmem_node(NODE_DATA(node), size, align, goal);
+}
+
+
void * __meminit vmemmap_alloc_block(unsigned long size, int node)
{
/* If the main allocator is up use that, fallback to bootmem. */
return page_address(page);
return NULL;
} else
- return __alloc_bootmem_node(NODE_DATA(node), size, size,
+ return __earlyonly_bootmem_alloc(node, size, size,
__pa(MAX_DMA_ADDRESS));
}
{
int i;
- vlan_netlink_fini();
vlan_ioctl_set(NULL);
+ vlan_netlink_fini();
/* Un-register us from receiving netdevice events */
unregister_netdevice_notifier(&vlan_notifier_block);
case SET_VLAN_NAME_TYPE_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ break;
if ((args.u.name_type >= 0) &&
(args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) {
vlan_name_type = args.u.name_type;
* OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs...
*/
- if (veth->h_vlan_proto != htons(ETH_P_8021Q)) {
+ if (veth->h_vlan_proto != htons(ETH_P_8021Q) ||
+ VLAN_DEV_INFO(dev)->flags & VLAN_FLAG_REORDER_HDR) {
int orig_headroom = skb_headroom(skb);
unsigned short veth_TCI;
err = br_fdb_init();
if (err)
- goto err_out1;
+ goto err_out;
err = br_netfilter_init();
if (err)
err_out2:
br_netfilter_fini();
err_out1:
+ br_fdb_fini();
+err_out:
llc_sap_put(br_stp_sap);
return err;
}
return 0;
}
-void __exit br_fdb_fini(void)
+void br_fdb_fini(void)
{
kmem_cache_destroy(br_fdb_cache);
}
struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
{
const unsigned char *dest = eth_hdr(skb)->h_dest;
+ int (*rhook)(struct sk_buff *skb);
if (!is_valid_ether_addr(eth_hdr(skb)->h_source))
goto drop;
switch (p->state) {
case BR_STATE_FORWARDING:
-
- if (br_should_route_hook) {
- if (br_should_route_hook(skb))
+ rhook = rcu_dereference(br_should_route_hook);
+ if (rhook != NULL) {
+ if (rhook(skb))
return skb;
dest = eth_hdr(skb)->h_dest;
}
if (datalen != EBT_ALIGN(expected_length)) {
printk(KERN_WARNING
- "ebtables: among: wrong size: %d"
+ "ebtables: among: wrong size: %d "
"against expected %d, rounded to %Zd\n",
datalen, expected_length,
EBT_ALIGN(expected_length));
if (ret < 0)
return ret;
/* see br_input.c */
- br_should_route_hook = ebt_broute;
+ rcu_assign_pointer(br_should_route_hook, ebt_broute);
return ret;
}
static void __exit ebtable_broute_fini(void)
{
- br_should_route_hook = NULL;
+ rcu_assign_pointer(br_should_route_hook, NULL);
synchronize_net();
ebt_unregister_table(&broute_table);
}
* @dev: device
*
* This function shuts down a device interface and removes it
- * from the kernel tables. On success 0 is returned, on a failure
- * a negative errno code is returned.
+ * from the kernel tables.
*
* Callers must hold the rtnl semaphore. You may want
* unregister_netdev() instead of this.
* @dev: device
*
* This function shuts down a device interface and removes it
- * from the kernel tables. On success 0 is returned, on a failure
- * a negative errno code is returned.
+ * from the kernel tables.
*
* This is just a wrapper for unregister_netdevice that takes
* the rtnl semaphore. In general you want to use this and not
x->curlft.bytes +=skb->len;
x->curlft.packets++;
- spin_unlock(&x->lock);
-
error:
spin_unlock(&x->lock);
return err;
/*
* Free an skbuff by memory without cleaning the state.
*/
-void kfree_skbmem(struct sk_buff *skb)
+static void kfree_skbmem(struct sk_buff *skb)
{
struct sk_buff *other;
atomic_t *fclone_ref;
- skb_release_data(skb);
switch (skb->fclone) {
case SKB_FCLONE_UNAVAILABLE:
kmem_cache_free(skbuff_head_cache, skb);
}
}
-/**
- * __kfree_skb - private function
- * @skb: buffer
- *
- * Free an sk_buff. Release anything attached to the buffer.
- * Clean the state. This is an internal helper function. Users should
- * always call kfree_skb
- */
-
-void __kfree_skb(struct sk_buff *skb)
+/* Free everything but the sk_buff shell. */
+static void skb_release_all(struct sk_buff *skb)
{
dst_release(skb->dst);
#ifdef CONFIG_XFRM
skb->tc_verd = 0;
#endif
#endif
+ skb_release_data(skb);
+}
+
+/**
+ * __kfree_skb - private function
+ * @skb: buffer
+ *
+ * Free an sk_buff. Release anything attached to the buffer.
+ * Clean the state. This is an internal helper function. Users should
+ * always call kfree_skb
+ */
+void __kfree_skb(struct sk_buff *skb)
+{
+ skb_release_all(skb);
kfree_skbmem(skb);
}
*/
struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src)
{
- skb_release_data(dst);
+ skb_release_all(dst);
return __skb_clone(dst, src);
}
EXPORT_SYMBOL_GPL(skb_morph);
}
if (unlikely(interval == 0)) {
- DCCP_WARN("%s(%p), Could not find a win_count interval > 0."
+ DCCP_WARN("%s(%p), Could not find a win_count interval > 0. "
"Defaulting to 1\n", dccp_role(sk), sk);
interval = 1;
}
struct dn_dev *dn_db;
struct ifaddrmsg *ifm;
struct dn_ifaddr *ifa, **ifap;
- int err = -EADDRNOTAVAIL;
+ int err;
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, dn_ifa_policy);
if (err < 0)
goto errout;
+ err = -ENODEV;
ifm = nlmsg_data(nlh);
if ((dn_db = dn_dev_by_index(ifm->ifa_index)) == NULL)
goto errout;
+ err = -EADDRNOTAVAIL;
for (ifap = &dn_db->ifa_list; (ifa = *ifap); ifap = &ifa->ifa_next) {
if (tb[IFA_LOCAL] &&
nla_memcmp(tb[IFA_LOCAL], &ifa->ifa_local, 2))
pos += 8;
if (ccmp_replay_check(pn, key->rx_pn)) {
- if (net_ratelimit()) {
+ if (ieee80211_ratelimit_debug(IEEE80211_DL_DROP)) {
IEEE80211_DEBUG_DROP("CCMP: replay detected: STA=%s "
"previous PN %02x%02x%02x%02x%02x%02x "
"received PN %02x%02x%02x%02x%02x%02x\n",
pos += 8;
if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
- if (net_ratelimit()) {
+ if (ieee80211_ratelimit_debug(IEEE80211_DL_DROP)) {
IEEE80211_DEBUG_DROP("TKIP: replay detected: STA=%s"
" previous TSC %08x%04x received TSC "
"%08x%04x\n", print_mac(mac, hdr->addr2),
* it needs to be recalculated for the next packet. */
tkey->rx_phase1_done = 0;
}
- if (net_ratelimit()) {
+ if (ieee80211_ratelimit_debug(IEEE80211_DL_DROP)) {
IEEE80211_DEBUG_DROP("TKIP: ICV error detected: STA="
"%s\n", print_mac(mac, hdr->addr2));
}
snap->oui[1] = oui[1];
snap->oui[2] = oui[2];
- *(u16 *) (data + SNAP_SIZE) = htons(h_proto);
+ h_proto = htons(h_proto);
+ memcpy(data + SNAP_SIZE, &h_proto, sizeof(u16));
return SNAP_SIZE + sizeof(u16);
}
#include <net/tcp.h>
#include <net/sock.h>
#include <net/arp.h>
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
#include <net/ax25.h>
-#if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
#include <net/netrom.h>
-#endif
-#endif
#if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
#include <net/atmclip.h>
struct neigh_table *clip_tbl_hook;
htons(dev_type) != arp->ar_hrd)
goto out;
break;
-#ifdef CONFIG_NET_ETHERNET
case ARPHRD_ETHER:
-#endif
-#ifdef CONFIG_TR
case ARPHRD_IEEE802_TR:
-#endif
-#ifdef CONFIG_FDDI
case ARPHRD_FDDI:
-#endif
-#ifdef CONFIG_NET_FC
case ARPHRD_IEEE802:
-#endif
-#if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
- defined(CONFIG_FDDI) || defined(CONFIG_NET_FC)
/*
* ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
* devices, according to RFC 2625) devices will accept ARP
arp->ar_pro != htons(ETH_P_IP))
goto out;
break;
-#endif
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
case ARPHRD_AX25:
if (arp->ar_pro != htons(AX25_P_IP) ||
arp->ar_hrd != htons(ARPHRD_AX25))
goto out;
break;
-#if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
case ARPHRD_NETROM:
if (arp->ar_pro != htons(AX25_P_IP) ||
arp->ar_hrd != htons(ARPHRD_NETROM))
goto out;
break;
-#endif
-#endif
}
/* Understand only these message types */
if (arp->ar_op == htons(ARPOP_REQUEST) &&
inet_addr_type(tip) == RTN_LOCAL &&
!arp_ignore(in_dev,dev,sip,tip))
- arp_send(ARPOP_REPLY,ETH_P_ARP,tip,dev,tip,sha,dev->dev_addr,dev->dev_addr);
+ arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
+ dev->dev_addr, sha);
goto out;
}
goto errout;
}
- ipv4_devconf_setall(in_dev);
-
ifa = inet_alloc_ifa();
if (ifa == NULL) {
/*
goto errout;
}
+ ipv4_devconf_setall(in_dev);
in_dev_hold(in_dev);
if (tb[IFA_ADDRESS] == NULL)
#include <linux/pfkeyv2.h>
#include <linux/random.h>
#include <linux/spinlock.h>
+#include <linux/in6.h>
#include <net/icmp.h>
#include <net/protocol.h>
#include <net/udp.h>
/* ... check padding bits here. Silly. :-) */
+ /* RFC4303: Drop dummy packets without any error */
+ if (nexthdr[1] == IPPROTO_NONE)
+ goto out;
+
iph = ip_hdr(skb);
ihl = iph->ihl * 4;
#define INET_DIAG_PUT(skb, attrtype, attrlen) \
RTA_DATA(__RTA_PUT(skb, attrtype, attrlen))
+static DEFINE_MUTEX(inet_diag_table_mutex);
+
+static const struct inet_diag_handler *inet_diag_lock_handler(int type)
+{
+#ifdef CONFIG_KMOD
+ if (!inet_diag_table[type])
+ request_module("net-pf-%d-proto-%d-type-%d", PF_NETLINK,
+ NETLINK_INET_DIAG, type);
+#endif
+
+ mutex_lock(&inet_diag_table_mutex);
+ if (!inet_diag_table[type])
+ return ERR_PTR(-ENOENT);
+
+ return inet_diag_table[type];
+}
+
+static inline void inet_diag_unlock_handler(
+ const struct inet_diag_handler *handler)
+{
+ mutex_unlock(&inet_diag_table_mutex);
+}
+
static int inet_csk_diag_fill(struct sock *sk,
struct sk_buff *skb,
int ext, u32 pid, u32 seq, u16 nlmsg_flags,
struct inet_hashinfo *hashinfo;
const struct inet_diag_handler *handler;
- handler = inet_diag_table[nlh->nlmsg_type];
- BUG_ON(handler == NULL);
+ handler = inet_diag_lock_handler(nlh->nlmsg_type);
+ if (!handler)
+ return -ENOENT;
+
hashinfo = handler->idiag_hashinfo;
+ err = -EINVAL;
if (req->idiag_family == AF_INET) {
sk = inet_lookup(hashinfo, req->id.idiag_dst[0],
}
#endif
else {
- return -EINVAL;
+ goto unlock;
}
+ err = -ENOENT;
if (sk == NULL)
- return -ENOENT;
+ goto unlock;
err = -ESTALE;
if ((req->id.idiag_cookie[0] != INET_DIAG_NOCOOKIE ||
else
sock_put(sk);
}
+unlock:
+ inet_diag_unlock_handler(handler);
return err;
}
const struct inet_diag_handler *handler;
struct inet_hashinfo *hashinfo;
- handler = inet_diag_table[cb->nlh->nlmsg_type];
- BUG_ON(handler == NULL);
+ handler = inet_diag_lock_handler(cb->nlh->nlmsg_type);
+ if (!handler)
+ goto no_handler;
+
hashinfo = handler->idiag_hashinfo;
s_i = cb->args[1];
}
if (!(r->idiag_states & ~(TCPF_LISTEN | TCPF_SYN_RECV)))
- return skb->len;
+ goto unlock;
for (i = s_i; i < hashinfo->ehash_size; i++) {
struct inet_ehash_bucket *head = &hashinfo->ehash[i];
done:
cb->args[1] = i;
cb->args[2] = num;
+unlock:
+ inet_diag_unlock_handler(handler);
+no_handler:
return skb->len;
}
nlmsg_len(nlh) < hdrlen)
return -EINVAL;
-#ifdef CONFIG_KMOD
- if (inet_diag_table[nlh->nlmsg_type] == NULL)
- request_module("net-pf-%d-proto-%d-type-%d", PF_NETLINK,
- NETLINK_INET_DIAG, nlh->nlmsg_type);
-#endif
-
- if (inet_diag_table[nlh->nlmsg_type] == NULL)
- return -ENOENT;
-
if (nlh->nlmsg_flags & NLM_F_DUMP) {
if (nlmsg_attrlen(nlh, hdrlen)) {
struct nlattr *attr;
mutex_unlock(&inet_diag_mutex);
}
-static DEFINE_SPINLOCK(inet_diag_register_lock);
-
int inet_diag_register(const struct inet_diag_handler *h)
{
const __u16 type = h->idiag_type;
if (type >= INET_DIAG_GETSOCK_MAX)
goto out;
- spin_lock(&inet_diag_register_lock);
+ mutex_lock(&inet_diag_table_mutex);
err = -EEXIST;
if (inet_diag_table[type] == NULL) {
inet_diag_table[type] = h;
err = 0;
}
- spin_unlock(&inet_diag_register_lock);
+ mutex_unlock(&inet_diag_table_mutex);
out:
return err;
}
if (type >= INET_DIAG_GETSOCK_MAX)
return;
- spin_lock(&inet_diag_register_lock);
+ mutex_lock(&inet_diag_table_mutex);
inet_diag_table[type] = NULL;
- spin_unlock(&inet_diag_register_lock);
-
- synchronize_rcu();
+ mutex_unlock(&inet_diag_table_mutex);
}
EXPORT_SYMBOL_GPL(inet_diag_unregister);
int data_len = len;
int hdr_len = min(len, hlen);
- skb = netdev_alloc_skb(lro_mgr->dev, hlen);
+ skb = netdev_alloc_skb(lro_mgr->dev, hlen + lro_mgr->frag_align_pad);
if (!skb)
return NULL;
+ skb_reserve(skb, lro_mgr->frag_align_pad);
skb->len = len;
skb->data_len = len - hdr_len;
skb->truesize += true_size;
verdict = NF_DROP;
if (IP_VS_FWD_METHOD(cp) != 0) {
- IP_VS_ERR("shouldn't reach here, because the box is on the"
+ IP_VS_ERR("shouldn't reach here, because the box is on the "
"half connection in the tun/dr module.\n");
}
static struct ctl_table vs_vars[] = {
{
- .ctl_name = NET_IPV4_VS_AMEMTHRESH,
.procname = "amemthresh",
.data = &sysctl_ip_vs_amemthresh,
.maxlen = sizeof(int),
},
#ifdef CONFIG_IP_VS_DEBUG
{
- .ctl_name = NET_IPV4_VS_DEBUG_LEVEL,
.procname = "debug_level",
.data = &sysctl_ip_vs_debug_level,
.maxlen = sizeof(int),
},
#endif
{
- .ctl_name = NET_IPV4_VS_AMDROPRATE,
.procname = "am_droprate",
.data = &sysctl_ip_vs_am_droprate,
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec,
},
{
- .ctl_name = NET_IPV4_VS_DROP_ENTRY,
.procname = "drop_entry",
.data = &sysctl_ip_vs_drop_entry,
.maxlen = sizeof(int),
.proc_handler = &proc_do_defense_mode,
},
{
- .ctl_name = NET_IPV4_VS_DROP_PACKET,
.procname = "drop_packet",
.data = &sysctl_ip_vs_drop_packet,
.maxlen = sizeof(int),
.proc_handler = &proc_do_defense_mode,
},
{
- .ctl_name = NET_IPV4_VS_SECURE_TCP,
.procname = "secure_tcp",
.data = &sysctl_ip_vs_secure_tcp,
.maxlen = sizeof(int),
},
#if 0
{
- .ctl_name = NET_IPV4_VS_TO_ES,
.procname = "timeout_established",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_ESTABLISHED],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_SS,
.procname = "timeout_synsent",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_SYN_SENT],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_SR,
.procname = "timeout_synrecv",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_SYN_RECV],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_FW,
.procname = "timeout_finwait",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_FIN_WAIT],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_TW,
.procname = "timeout_timewait",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_TIME_WAIT],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_CL,
.procname = "timeout_close",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_CLOSE],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_CW,
.procname = "timeout_closewait",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_CLOSE_WAIT],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_LA,
.procname = "timeout_lastack",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_LAST_ACK],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_LI,
.procname = "timeout_listen",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_LISTEN],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_SA,
.procname = "timeout_synack",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_SYNACK],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_UDP,
.procname = "timeout_udp",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_UDP],
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec_jiffies,
},
{
- .ctl_name = NET_IPV4_VS_TO_ICMP,
.procname = "timeout_icmp",
.data = &vs_timeout_table_dos.timeout[IP_VS_S_ICMP],
.maxlen = sizeof(int),
},
#endif
{
- .ctl_name = NET_IPV4_VS_CACHE_BYPASS,
.procname = "cache_bypass",
.data = &sysctl_ip_vs_cache_bypass,
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec,
},
{
- .ctl_name = NET_IPV4_VS_EXPIRE_NODEST_CONN,
.procname = "expire_nodest_conn",
.data = &sysctl_ip_vs_expire_nodest_conn,
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec,
},
{
- .ctl_name = NET_IPV4_VS_EXPIRE_QUIESCENT_TEMPLATE,
.procname = "expire_quiescent_template",
.data = &sysctl_ip_vs_expire_quiescent_template,
.maxlen = sizeof(int),
.proc_handler = &proc_dointvec,
},
{
- .ctl_name = NET_IPV4_VS_SYNC_THRESHOLD,
.procname = "sync_threshold",
.data = &sysctl_ip_vs_sync_threshold,
.maxlen = sizeof(sysctl_ip_vs_sync_threshold),
.proc_handler = &proc_do_sync_threshold,
},
{
- .ctl_name = NET_IPV4_VS_NAT_ICMP_SEND,
.procname = "nat_icmp_send",
.data = &sysctl_ip_vs_nat_icmp_send,
.maxlen = sizeof(int),
static ctl_table vs_table[] = {
{
- .ctl_name = NET_IPV4_VS,
.procname = "vs",
.mode = 0555,
.child = vs_vars
static ctl_table vs_vars_table[] = {
{
- .ctl_name = NET_IPV4_VS_LBLC_EXPIRE,
.procname = "lblc_expiration",
.data = &sysctl_ip_vs_lblc_expiration,
.maxlen = sizeof(int),
static ctl_table vs_table[] = {
{
- .ctl_name = NET_IPV4_VS,
.procname = "vs",
.mode = 0555,
.child = vs_vars_table
static int __init ip_vs_lblc_init(void)
{
+ int ret;
+
INIT_LIST_HEAD(&ip_vs_lblc_scheduler.n_list);
sysctl_header = register_sysctl_table(lblc_root_table);
- return register_ip_vs_scheduler(&ip_vs_lblc_scheduler);
+ ret = register_ip_vs_scheduler(&ip_vs_lblc_scheduler);
+ if (ret)
+ unregister_sysctl_table(sysctl_header);
+ return ret;
}
static ctl_table vs_vars_table[] = {
{
- .ctl_name = NET_IPV4_VS_LBLCR_EXPIRE,
.procname = "lblcr_expiration",
.data = &sysctl_ip_vs_lblcr_expiration,
.maxlen = sizeof(int),
static ctl_table vs_table[] = {
{
- .ctl_name = NET_IPV4_VS,
.procname = "vs",
.mode = 0555,
.child = vs_vars_table
static int __init ip_vs_lblcr_init(void)
{
+ int ret;
+
INIT_LIST_HEAD(&ip_vs_lblcr_scheduler.n_list);
sysctl_header = register_sysctl_table(lblcr_root_table);
- return register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
+ ret = register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
+ if (ret)
+ unregister_sysctl_table(sysctl_header);
+ return ret;
}
/*
* register an ipvs protocol
*/
-static int register_ip_vs_protocol(struct ip_vs_protocol *pp)
+static int __used register_ip_vs_protocol(struct ip_vs_protocol *pp)
{
unsigned hash = IP_VS_PROTO_HASH(pp->protocol);
/* increase the module use count */
ip_vs_use_count_inc();
- /*
- * Make sure that the scheduler with this name doesn't exist
- * in the scheduler list.
- */
- sched = ip_vs_sched_getbyname(scheduler->name);
- if (sched) {
- ip_vs_scheduler_put(sched);
- ip_vs_use_count_dec();
- IP_VS_ERR("register_ip_vs_scheduler(): [%s] scheduler "
- "already existed in the system\n", scheduler->name);
- return -EINVAL;
- }
-
write_lock_bh(&__ip_vs_sched_lock);
if (scheduler->n_list.next != &scheduler->n_list) {
return -EINVAL;
}
+ /*
+ * Make sure that the scheduler with this name doesn't exist
+ * in the scheduler list.
+ */
+ list_for_each_entry(sched, &ip_vs_schedulers, n_list) {
+ if (strcmp(scheduler->name, sched->name) == 0) {
+ write_unlock_bh(&__ip_vs_sched_lock);
+ ip_vs_use_count_dec();
+ IP_VS_ERR("register_ip_vs_scheduler(): [%s] scheduler "
+ "already existed in the system\n",
+ scheduler->name);
+ return -EINVAL;
+ }
+ }
/*
* Add it into the d-linked scheduler list
*/
if (skb->len < sizeof(struct iphdr) ||
ip_hdrlen(skb) < sizeof(struct iphdr)) {
if (net_ratelimit())
- printk("iptable_raw: ignoring short SOCK_RAW"
+ printk("iptable_raw: ignoring short SOCK_RAW "
"packet.\n");
return NF_ACCEPT;
}
struct nf_conn_nat *new_nat = nf_ct_ext_find(conntrack, NF_CT_EXT_NAT);
struct nf_conn_nat *old_nat = (struct nf_conn_nat *)old;
struct nf_conn *ct = old_nat->ct;
- unsigned int srchash;
- if (!(ct->status & IPS_NAT_DONE_MASK))
+ if (!ct || !(ct->status & IPS_NAT_DONE_MASK))
return;
- srchash = hash_by_src(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-
write_lock_bh(&nf_nat_lock);
hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource);
new_nat->ct = ct;
unsigned hash = rt_hash(rt->fl.fl4_dst, rt->fl.fl4_src,
rt->fl.oif);
#if RT_CACHE_DEBUG >= 1
- printk(KERN_DEBUG "ip_rt_advice: redirect to "
+ printk(KERN_DEBUG "ipv4_negative_advice: redirect to "
"%u.%u.%u.%u/%02x dropped\n",
NIPQUAD(rt->rt_dst), rt->fl.fl4_tos);
#endif
break;
case ENETUNREACH:
code = ICMP_NET_UNREACH;
+ IP_INC_STATS_BH(IPSTATS_MIB_INNOROUTES);
break;
case EACCES:
code = ICMP_PKT_FILTERED;
RT_CACHE_STAT_INC(in_no_route);
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_UNIVERSE);
res.type = RTN_UNREACHABLE;
+ if (err == -ESRCH)
+ err = -ENETUNREACH;
goto local_input;
/*
offset /= sizeof(u32);
if (length > 0) {
- u32 *src = ((u32 *) IP_RT_ACCT_CPU(0)) + offset;
u32 *dst = (u32 *) buffer;
- /* Copy first cpu. */
*start = buffer;
- memcpy(dst, src, length);
+ memset(dst, 0, length);
- /* Add the other cpus in, one int at a time */
for_each_possible_cpu(i) {
unsigned int j;
-
- src = ((u32 *) IP_RT_ACCT_CPU(i)) + offset;
+ u32 *src = ((u32 *) IP_RT_ACCT_CPU(i)) + offset;
for (j = 0; j < length/4; j++)
dst[j] += src[j];
tcp_get_default_congestion_control(val);
ret = sysctl_string(&tbl, name, nlen, oldval, oldlenp, newval, newlen);
- if (ret == 0 && newval && newlen)
+ if (ret == 1 && newval && newlen)
ret = tcp_set_default_congestion_control(val);
return ret;
}
struct illinois *ca = inet_csk_ca(sk);
/* Multiplicative decrease */
- return max((tp->snd_cwnd * ca->beta) >> BETA_SHIFT, 2U);
+ return max(tp->snd_cwnd - ((tp->snd_cwnd * ca->beta) >> BETA_SHIFT), 2U);
}
}
if (tp->frto_counter == 1) {
- /* Sending of the next skb must be allowed or no F-RTO */
- if (!tcp_send_head(sk) ||
- after(TCP_SKB_CB(tcp_send_head(sk))->end_seq,
- tp->snd_una + tp->snd_wnd)) {
- tcp_enter_frto_loss(sk, (tp->frto_counter == 1 ? 2 : 3),
- flag);
- return 1;
- }
-
+ /* tcp_may_send_now needs to see updated state */
tp->snd_cwnd = tcp_packets_in_flight(tp) + 2;
tp->frto_counter = 2;
+
+ if (!tcp_may_send_now(sk))
+ tcp_enter_frto_loss(sk, 2, flag);
+
return 1;
} else {
switch (sysctl_tcp_frto_response) {
}
prior_fackets = tp->fackets_out;
+ prior_in_flight = tcp_packets_in_flight(tp);
if (!(flag&FLAG_SLOWPATH) && after(ack, prior_snd_una)) {
/* Window is constant, pure forward advance.
if (!prior_packets)
goto no_queue;
- prior_in_flight = tcp_packets_in_flight(tp);
-
/* See if we can take anything off of the retransmit queue. */
flag |= tcp_clean_rtx_queue(sk, &seq_rtt, prior_fackets);
sizeof(*keys) * md5sig->entries4);
/* Free old key list, and reference new one */
- if (md5sig->keys4)
- kfree(md5sig->keys4);
+ kfree(md5sig->keys4);
md5sig->keys4 = keys;
md5sig->alloced4++;
}
tp->md5sig_info->alloced4 = 0;
} else if (tp->md5sig_info->entries4 != i) {
/* Need to do some manipulation */
- memcpy(&tp->md5sig_info->keys4[i],
- &tp->md5sig_info->keys4[i+1],
- (tp->md5sig_info->entries4 - i) *
- sizeof(struct tcp4_md5sig_key));
+ memmove(&tp->md5sig_info->keys4[i],
+ &tp->md5sig_info->keys4[i+1],
+ (tp->md5sig_info->entries4 - i) *
+ sizeof(struct tcp4_md5sig_key));
}
tcp_free_md5sig_pool();
return 0;
return (skb &&
tcp_snd_test(sk, skb, tcp_current_mss(sk, 1),
(tcp_skb_is_last(sk, skb) ?
- TCP_NAGLE_PUSH :
- tp->nonagle)));
+ tp->nonagle : TCP_NAGLE_PUSH)));
}
/* Trim TSO SKB to LEN bytes, put the remaining data into a new packet
struct sk_buff *skb, *nskb, *next;
int len;
int probe_size;
+ int size_needed;
unsigned int pif;
int copy;
int mss_now;
/* Very simple search strategy: just double the MSS. */
mss_now = tcp_current_mss(sk, 0);
probe_size = 2*tp->mss_cache;
+ size_needed = probe_size + (tp->reordering + 1) * tp->mss_cache;
if (probe_size > tcp_mtu_to_mss(sk, icsk->icsk_mtup.search_high)) {
/* TODO: set timer for probe_converge_event */
return -1;
}
/* Have enough data in the send queue to probe? */
- len = 0;
- if ((skb = tcp_send_head(sk)) == NULL)
- return -1;
- while ((len += skb->len) < probe_size && !tcp_skb_is_last(sk, skb))
- skb = tcp_write_queue_next(sk, skb);
- if (len < probe_size)
+ if (tp->write_seq - tp->snd_nxt < size_needed)
return -1;
- /* Receive window check. */
- if (after(TCP_SKB_CB(skb)->seq + probe_size, tp->snd_una + tp->snd_wnd)) {
- if (tp->snd_wnd < probe_size)
- return -1;
- else
- return 0;
- }
+ if (tp->snd_wnd < size_needed)
+ return -1;
+ if (after(tp->snd_nxt + size_needed, tp->snd_una + tp->snd_wnd))
+ return 0;
/* Do we need to wait to drain cwnd? */
pif = tcp_packets_in_flight(tp);
skb = tcp_send_head(sk);
tcp_insert_write_queue_before(nskb, skb, sk);
- tcp_advance_send_head(sk, skb);
TCP_SKB_CB(nskb)->seq = TCP_SKB_CB(skb)->seq;
TCP_SKB_CB(nskb)->end_seq = TCP_SKB_CB(skb)->seq + probe_size;
if (unlikely(score.addr_type == IPV6_ADDR_ANY ||
score.addr_type & IPV6_ADDR_MULTICAST)) {
LIMIT_NETDEBUG(KERN_DEBUG
- "ADDRCONF: unspecified / multicast address"
+ "ADDRCONF: unspecified / multicast address "
"assigned as unicast address on %s",
dev->name);
continue;
break;
}
+ if (!idev && dev->mtu >= IPV6_MIN_MTU)
+ idev = ipv6_add_dev(dev);
+
if (idev)
idev->if_flags |= IF_READY;
} else {
break;
case NETDEV_CHANGEMTU:
- if ( idev && dev->mtu >= IPV6_MIN_MTU) {
+ if (idev && dev->mtu >= IPV6_MIN_MTU) {
rt6_mtu_change(dev, dev->mtu);
idev->cnf.mtu6 = dev->mtu;
break;
}
+ if (!idev && dev->mtu >= IPV6_MIN_MTU) {
+ idev = ipv6_add_dev(dev);
+ if (idev)
+ break;
+ }
+
/* MTU falled under IPV6_MIN_MTU. Stop IPv6 on this interface. */
case NETDEV_DOWN:
}
/* ... check padding bits here. Silly. :-) */
+ /* RFC4303: Drop dummy packets without any error */
+ if (nexthdr[1] == IPPROTO_NONE) {
+ ret = -EINVAL;
+ goto out;
+ }
+
pskb_trim(skb, skb->len - alen - padlen - 2);
ret = nexthdr[1];
}
return 0;
out_err_release:
+ if (err == -ENETUNREACH)
+ IP6_INC_STATS_BH(NULL, IPSTATS_MIB_OUTNOROUTES);
dst_release(*dst);
*dst = NULL;
return err;
}
sk->sk_route_caps &= ~NETIF_F_GSO_MASK;
}
- tcp_alloc_md5sig_pool();
+ if (tcp_alloc_md5sig_pool() == NULL) {
+ kfree(newkey);
+ return -ENOMEM;
+ }
if (tp->md5sig_info->alloced6 == tp->md5sig_info->entries6) {
keys = kmalloc((sizeof (tp->md5sig_info->keys6[0]) *
(tp->md5sig_info->entries6 + 1)), GFP_ATOMIC);
kfree(tp->md5sig_info->keys6);
tp->md5sig_info->keys6 = NULL;
tp->md5sig_info->alloced6 = 0;
-
- tcp_free_md5sig_pool();
-
- return 0;
} else {
/* shrink the database */
if (tp->md5sig_info->entries6 != i)
(tp->md5sig_info->entries6 - i)
* sizeof (tp->md5sig_info->keys6[0]));
}
+ tcp_free_md5sig_pool();
+ return 0;
}
}
return -ENOENT;
dst_prev->output = dst_prev->xfrm->outer_mode->afinfo->output;
/* Sheit... I remember I did this right. Apparently,
* it was magically lost, so this code needs audit */
- x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTCF_BROADCAST|RTCF_MULTICAST|RTCF_LOCAL);
+ x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTF_ANYCAST|RTF_LOCAL);
x->u.rt6.rt6i_metric = rt0->rt6i_metric;
x->u.rt6.rt6i_node = rt0->rt6i_node;
x->u.rt6.rt6i_gateway = rt0->rt6i_gateway;
self->flow = cmd;
}
+#ifdef CONFIG_PROC_FS
static int ircomm_tty_line_info(struct ircomm_tty_cb *self, char *buf)
{
int ret=0;
*
*
*/
-#ifdef CONFIG_PROC_FS
static int ircomm_tty_read_proc(char *buf, char **start, off_t offset, int len,
int *eof, void *unused)
{
opcode = fp[0];
if (~opcode & 0x80) {
- IRDA_WARNING("%s: IrIAS multiframe commands or results"
+ IRDA_WARNING("%s: IrIAS multiframe commands or results "
"is not implemented yet!\n", __FUNCTION__);
return;
}
*/
void irlan_eth_send_gratuitous_arp(struct net_device *dev)
{
+#ifdef CONFIG_INET
struct in_device *in_dev;
/*
* is useful if we have changed access points on the same
* subnet.
*/
-#ifdef CONFIG_INET
IRDA_DEBUG(4, "IrLAN: Sending gratuitous ARP\n");
rcu_read_lock();
in_dev = __in_dev_get_rcu(dev);
struct iucv_irq_data data;
};
-static struct iucv_irq_data *iucv_irq_data;
+static struct iucv_irq_data *iucv_irq_data[NR_CPUS];
static cpumask_t iucv_buffer_cpumask = CPU_MASK_NONE;
static cpumask_t iucv_irq_cpumask = CPU_MASK_NONE;
/*
* Anchor for per-cpu IUCV command parameter block.
*/
-static union iucv_param *iucv_param;
+static union iucv_param *iucv_param[NR_CPUS];
/**
* iucv_call_b2f0
* 0x10 - Flag to allow priority message completion interrupts
* 0x08 - Flag to allow IUCV control interrupts
*/
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[cpu];
memset(parm, 0, sizeof(union iucv_param));
parm->set_mask.ipmask = 0xf8;
iucv_call_b2f0(IUCV_SETMASK, parm);
union iucv_param *parm;
/* Disable all iucv interrupts. */
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[cpu];
memset(parm, 0, sizeof(union iucv_param));
iucv_call_b2f0(IUCV_SETMASK, parm);
return;
/* Declare interrupt buffer. */
- parm = percpu_ptr(iucv_param, cpu);
+ parm = iucv_param[cpu];
memset(parm, 0, sizeof(union iucv_param));
- parm->db.ipbfadr1 = virt_to_phys(percpu_ptr(iucv_irq_data, cpu));
+ parm->db.ipbfadr1 = virt_to_phys(iucv_irq_data[cpu]);
rc = iucv_call_b2f0(IUCV_DECLARE_BUFFER, parm);
if (rc) {
char *err = "Unknown";
iucv_block_cpu(NULL);
/* Retrieve interrupt buffer. */
- parm = percpu_ptr(iucv_param, cpu);
+ parm = iucv_param[cpu];
iucv_call_b2f0(IUCV_RETRIEVE_BUFFER, parm);
/* Clear indication that an iucv buffer exists for this cpu. */
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (!percpu_populate(iucv_irq_data,
- sizeof(struct iucv_irq_data),
- GFP_KERNEL|GFP_DMA, cpu))
+ iucv_irq_data[cpu] = kmalloc_node(sizeof(struct iucv_irq_data),
+ GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+ if (!iucv_irq_data[cpu])
return NOTIFY_BAD;
- if (!percpu_populate(iucv_param, sizeof(union iucv_param),
- GFP_KERNEL|GFP_DMA, cpu)) {
- percpu_depopulate(iucv_irq_data, cpu);
+ iucv_param[cpu] = kmalloc_node(sizeof(union iucv_param),
+ GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+ if (!iucv_param[cpu])
return NOTIFY_BAD;
- }
break;
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- percpu_depopulate(iucv_param, cpu);
- percpu_depopulate(iucv_irq_data, cpu);
+ kfree(iucv_param[cpu]);
+ iucv_param[cpu] = NULL;
+ kfree(iucv_irq_data[cpu]);
+ iucv_irq_data[cpu] = NULL;
break;
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
{
union iucv_param *parm;
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
if (userdata)
memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
local_bh_disable();
/* Prepare parameter block. */
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
parm->ctrl.ippathid = path->pathid;
parm->ctrl.ipmsglim = path->msglim;
BUG_ON(in_atomic());
spin_lock_bh(&iucv_table_lock);
iucv_cleanup_queue();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
parm->ctrl.ipmsglim = path->msglim;
parm->ctrl.ipflags1 = path->flags;
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
if (userdata)
memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
if (userdata)
memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
parm->purge.ippathid = path->pathid;
parm->purge.ipmsgid = msg->id;
}
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
parm->db.ipbfadr1 = (u32)(addr_t) buffer;
parm->db.ipbfln1f = (u32) size;
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
parm->db.ippathid = path->pathid;
parm->db.ipmsgid = msg->id;
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
if (flags & IUCV_IPRMDATA) {
parm->dpl.ippathid = path->pathid;
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
if (flags & IUCV_IPRMDATA) {
/* Message of 8 bytes can be placed into the parameter list. */
int rc;
local_bh_disable();
- parm = percpu_ptr(iucv_param, smp_processor_id());
+ parm = iucv_param[smp_processor_id()];
memset(parm, 0, sizeof(union iucv_param));
if (flags & IUCV_IPRMDATA) {
parm->dpl.ippathid = path->pathid;
struct iucv_irq_data *p;
struct iucv_irq_list *work;
- p = percpu_ptr(iucv_irq_data, smp_processor_id());
+ p = iucv_irq_data[smp_processor_id()];
if (p->ippathid >= iucv_max_pathid) {
printk(KERN_WARNING "iucv_do_int: Got interrupt with "
"pathid %d > max_connections (%ld)\n",
static int __init iucv_init(void)
{
int rc;
+ int cpu;
if (!MACHINE_IS_VM) {
rc = -EPROTONOSUPPORT;
rc = PTR_ERR(iucv_root);
goto out_bus;
}
- /* Note: GFP_DMA used to get memory below 2G */
- iucv_irq_data = percpu_alloc(sizeof(struct iucv_irq_data),
- GFP_KERNEL|GFP_DMA);
- if (!iucv_irq_data) {
- rc = -ENOMEM;
- goto out_root;
- }
- /* Allocate parameter blocks. */
- iucv_param = percpu_alloc(sizeof(union iucv_param),
- GFP_KERNEL|GFP_DMA);
- if (!iucv_param) {
- rc = -ENOMEM;
- goto out_extint;
+
+ for_each_online_cpu(cpu) {
+ /* Note: GFP_DMA used to get memory below 2G */
+ iucv_irq_data[cpu] = kmalloc_node(sizeof(struct iucv_irq_data),
+ GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+ if (!iucv_irq_data[cpu]) {
+ rc = -ENOMEM;
+ goto out_free;
+ }
+
+ /* Allocate parameter blocks. */
+ iucv_param[cpu] = kmalloc_node(sizeof(union iucv_param),
+ GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+ if (!iucv_param[cpu]) {
+ rc = -ENOMEM;
+ goto out_free;
+ }
}
register_hotcpu_notifier(&iucv_cpu_notifier);
ASCEBC(iucv_error_no_listener, 16);
iucv_available = 1;
return 0;
-out_extint:
- percpu_free(iucv_irq_data);
-out_root:
+out_free:
+ for_each_possible_cpu(cpu) {
+ kfree(iucv_param[cpu]);
+ iucv_param[cpu] = NULL;
+ kfree(iucv_irq_data[cpu]);
+ iucv_irq_data[cpu] = NULL;
+ }
s390_root_dev_unregister(iucv_root);
out_bus:
bus_unregister(&iucv_bus);
static void __exit iucv_exit(void)
{
struct iucv_irq_list *p, *n;
+ int cpu;
spin_lock_irq(&iucv_queue_lock);
list_for_each_entry_safe(p, n, &iucv_task_queue, list)
kfree(p);
spin_unlock_irq(&iucv_queue_lock);
unregister_hotcpu_notifier(&iucv_cpu_notifier);
- percpu_free(iucv_param);
- percpu_free(iucv_irq_data);
+ for_each_possible_cpu(cpu) {
+ kfree(iucv_param[cpu]);
+ iucv_param[cpu] = NULL;
+ kfree(iucv_irq_data[cpu]);
+ iucv_irq_data[cpu] = NULL;
+ }
s390_root_dev_unregister(iucv_root);
bus_unregister(&iucv_bus);
unregister_external_interrupt(0x4000, iucv_external_interrupt);
{
struct sk_buff *skb;
- spin_lock_bh(&x->lock);
skb = __pfkey_xfrm_state2msg(x, 1, 3);
- spin_unlock_bh(&x->lock);
return skb;
}
out_hdr = (struct sadb_msg *) out_skb->data;
out_hdr->sadb_msg_version = hdr->sadb_msg_version;
- out_hdr->sadb_msg_type = SADB_DUMP;
+ out_hdr->sadb_msg_type = SADB_GET;
out_hdr->sadb_msg_satype = pfkey_proto2satype(proto);
out_hdr->sadb_msg_errno = 0;
out_hdr->sadb_msg_reserved = 0;
res = local->ops->start(local_to_hw(local));
if (res)
return res;
+ ieee80211_hw_config(local);
}
switch (sdata->type) {
netif_tx_unlock_bh(local->mdev);
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
- ieee80211_hw_config(local);
}
break;
case IEEE80211_IF_TYPE_STA:
tasklet_enable(&local->tasklet);
}
+ /*
+ * set_multicast_list will be invoked by the networking core
+ * which will check whether any increments here were done in
+ * error and sync them down to the hardware as filter flags.
+ */
+ if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+ atomic_inc(&local->iff_allmultis);
+
+ if (sdata->flags & IEEE80211_SDATA_PROMISC)
+ atomic_inc(&local->iff_promiscs);
+
local->open_count++;
netif_start_queue(dev);
netif_stop_queue(dev);
+ /*
+ * Don't count this interface for promisc/allmulti while it
+ * is down. dev_mc_unsync() will invoke set_multicast_list
+ * on the master interface which will sync these down to the
+ * hardware as filter flags.
+ */
+ if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+ atomic_dec(&local->iff_allmultis);
+
+ if (sdata->flags & IEEE80211_SDATA_PROMISC)
+ atomic_dec(&local->iff_promiscs);
+
dev_mc_unsync(local->mdev, dev);
/* down all dependent devices, that is VLANs */
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
- local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
- ieee80211_hw_config(local);
+ local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
}
break;
case IEEE80211_IF_TYPE_STA:
cancel_delayed_work(&local->scan_work);
}
flush_workqueue(local->hw.workqueue);
+
+ sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
+ kfree(sdata->u.sta.extra_ie);
+ sdata->u.sta.extra_ie = NULL;
+ sdata->u.sta.extra_ie_len = 0;
/* fall through */
default:
conf.if_id = dev->ifindex;
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
- sdata_allmulti = sdata->flags & IEEE80211_SDATA_ALLMULTI;
- sdata_promisc = sdata->flags & IEEE80211_SDATA_PROMISC;
+ sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
+ sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
local->sta_scanning = 0;
if (ieee80211_hw_config(local))
- printk(KERN_DEBUG "%s: failed to restore operational"
+ printk(KERN_DEBUG "%s: failed to restore operational "
"channel after scan\n", dev->name);
if (unlikely(!(rx->fc & IEEE80211_FCTL_PROTECTED) &&
(rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC &&
- rx->sdata->drop_unencrypted &&
+ (rx->key || rx->sdata->drop_unencrypted) &&
(rx->sdata->eapol == 0 || !ieee80211_is_eapol(rx->skb)))) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: RX non-WEP frame, but expected "
if (ieee80211_wep_decrypt_data(local->wep_rx_tfm, rc4key, klen,
skb->data + hdrlen + WEP_IV_LEN,
len)) {
- printk(KERN_DEBUG "WEP decrypt failed (ICV)\n");
+ if (net_ratelimit())
+ printk(KERN_DEBUG "WEP decrypt failed (ICV)\n");
ret = -1;
}
{
const struct xt_connmark_target_info *matchinfo = targinfo;
- if (nf_ct_l3proto_try_module_get(target->family) < 0) {
- printk(KERN_WARNING "can't load conntrack support for "
- "proto=%d\n", target->family);
- return false;
- }
if (matchinfo->mode == XT_CONNMARK_RESTORE) {
if (strcmp(tablename, "mangle") != 0) {
printk(KERN_WARNING "CONNMARK: restore can only be "
printk(KERN_WARNING "CONNMARK: Only supports 32bit mark\n");
return false;
}
+ if (nf_ct_l3proto_try_module_get(target->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", target->family);
+ return false;
+ }
return true;
}
{
const struct xt_connsecmark_target_info *info = targinfo;
- if (nf_ct_l3proto_try_module_get(target->family) < 0) {
- printk(KERN_WARNING "can't load conntrack support for "
- "proto=%d\n", target->family);
- return false;
- }
switch (info->mode) {
case CONNSECMARK_SAVE:
case CONNSECMARK_RESTORE:
return false;
}
+ if (nf_ct_l3proto_try_module_get(target->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", target->family);
+ return false;
+ }
return true;
}
nexthdr = ipv6h->nexthdr;
tcphoff = ipv6_skip_exthdr(skb, sizeof(*ipv6h), &nexthdr);
- if (tcphoff < 0) {
- WARN_ON(1);
+ if (tcphoff < 0)
return NF_DROP;
- }
ret = tcpmss_mangle_packet(skb, targinfo, tcphoff,
sizeof(*ipv6h) + sizeof(struct tcphdr));
if (ret < 0)
static int rfkill_toggle_radio(struct rfkill *rfkill,
enum rfkill_state state)
{
- int retval;
-
- retval = mutex_lock_interruptible(&rfkill->mutex);
- if (retval)
- return retval;
+ int retval = 0;
if (state != rfkill->state) {
retval = rfkill->toggle_radio(rfkill->data, state);
}
}
- mutex_unlock(&rfkill->mutex);
return retval;
}
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (mutex_lock_interruptible(&rfkill->mutex))
+ return -ERESTARTSYS;
error = rfkill_toggle_radio(rfkill,
state ? RFKILL_STATE_ON : RFKILL_STATE_OFF);
- if (error)
- return error;
+ mutex_unlock(&rfkill->mutex);
- return count;
+ return error ? error : count;
}
static ssize_t rfkill_claim_show(struct device *dev,
static int rose_rebuild_header(struct sk_buff *skb)
{
+#ifdef CONFIG_INET
struct net_device *dev = skb->dev;
struct net_device_stats *stats = netdev_priv(dev);
unsigned char *bp = (unsigned char *)skb->data;
struct sk_buff *skbn;
unsigned int len;
-#ifdef CONFIG_INET
if (arp_find(bp + 7, skb)) {
return 1;
}
config AF_RXRPC
tristate "RxRPC session sockets"
depends on INET && EXPERIMENTAL
+ select CRYPTO
select KEYS
help
Say Y or M here to include support for RxRPC session sockets (just
abort_code = RXKADINCONSISTENCY;
if (version != RXKAD_VERSION)
+ goto protocol_error;
abort_code = RXKADTICKETLEN;
if (ticket_len < 4 || ticket_len > MAXKRB5TICKETLEN)
tristate "The SCTP Protocol (EXPERIMENTAL)"
depends on INET && EXPERIMENTAL
depends on IPV6 || IPV6=n
- select CRYPTO if SCTP_HMAC_SHA1 || SCTP_HMAC_MD5
- select CRYPTO_HMAC if SCTP_HMAC_SHA1 || SCTP_HMAC_MD5
- select CRYPTO_SHA1 if SCTP_HMAC_SHA1
+ select CRYPTO
+ select CRYPTO_HMAC
+ select CRYPTO_SHA1
select CRYPTO_MD5 if SCTP_HMAC_MD5
---help---
Stream Control Transmission Protocol
/* id 2 is reserved as well */
.hmac_id = SCTP_AUTH_HMAC_ID_RESERVED_2,
},
+#if defined (CONFIG_CRYPTO_SHA256) || defined (CONFIG_CRYPTO_SHA256_MODULE)
{
.hmac_id = SCTP_AUTH_HMAC_ID_SHA256,
.hmac_name="hmac(sha256)",
.hmac_len = SCTP_SHA256_SIG_SIZE,
}
+#endif
};
int found = 0;
int i;
- if (!param)
+ if (!param || param->param_hdr.length == 0)
return 0;
len = ntohs(param->param_hdr.length) - sizeof(sctp_paramhdr_t);
return error;
}
+/* Exactly duplicate the address lists. This is necessary when doing
+ * peer-offs and accepts. We don't want to put all the current system
+ * addresses into the endpoint. That's useless. But we do want duplicat
+ * the list of bound addresses that the older endpoint used.
+ */
+int sctp_bind_addr_dup(struct sctp_bind_addr *dest,
+ const struct sctp_bind_addr *src,
+ gfp_t gfp)
+{
+ struct sctp_sockaddr_entry *addr;
+ struct list_head *pos;
+ int error = 0;
+
+ /* All addresses share the same port. */
+ dest->port = src->port;
+
+ list_for_each(pos, &src->address_list) {
+ addr = list_entry(pos, struct sctp_sockaddr_entry, list);
+ error = sctp_add_bind_addr(dest, &addr->a, 1, gfp);
+ if (error < 0)
+ break;
+ }
+
+ return error;
+}
+
/* Initialize the SCTP_bind_addr structure for either an endpoint or
* an association.
*/
union sctp_params param,
const union sctp_addr *peer_addr,
gfp_t gfp);
+static void *sctp_addto_param(struct sctp_chunk *chunk, int len,
+ const void *data);
/* What was the inbound interface for this chunk? */
int sctp_chunk_iif(const struct sctp_chunk *chunk)
chunksize = sizeof(init) + addrs_len + SCTP_SAT_LEN(num_types);
chunksize += sizeof(ecap_param);
- if (sctp_prsctp_enable) {
- chunksize += sizeof(prsctp_param);
- extensions[num_ext] = SCTP_CID_FWD_TSN;
- num_ext += 1;
- }
+
/* ADDIP: Section 4.2.7:
* An implementation supporting this extension [ADDIP] MUST list
* the ASCONF,the ASCONF-ACK, and the AUTH chunks in its INIT and
if (auth_chunks->length)
chunksize += ntohs(auth_chunks->length);
else
- auth_hmacs = NULL;
+ auth_chunks = NULL;
extensions[num_ext] = SCTP_CID_AUTH;
num_ext += 1;
htons(sizeof(sctp_supported_ext_param_t) + num_ext);
sctp_addto_chunk(retval, sizeof(sctp_supported_ext_param_t),
&ext_param);
- sctp_addto_chunk(retval, num_ext, extensions);
+ sctp_addto_param(retval, num_ext, extensions);
}
if (sctp_prsctp_enable)
if (asoc->peer.ecn_capable)
chunksize += sizeof(ecap_param);
- /* Tell peer that we'll do PR-SCTP only if peer advertised. */
- if (asoc->peer.prsctp_capable) {
- chunksize += sizeof(prsctp_param);
- extensions[num_ext] = SCTP_CID_FWD_TSN;
- num_ext += 1;
- }
-
if (sctp_addip_enable) {
extensions[num_ext] = SCTP_CID_ASCONF;
extensions[num_ext+1] = SCTP_CID_ASCONF_ACK;
num_ext += 2;
}
- chunksize += sizeof(ext_param) + num_ext;
chunksize += sizeof(aiparam);
if (asoc->peer.auth_capable) {
num_ext += 1;
}
+ if (num_ext)
+ chunksize += sizeof(sctp_supported_ext_param_t) + num_ext;
+
/* Now allocate and fill out the chunk. */
retval = sctp_make_chunk(asoc, SCTP_CID_INIT_ACK, 0, chunksize);
if (!retval)
htons(sizeof(sctp_supported_ext_param_t) + num_ext);
sctp_addto_chunk(retval, sizeof(sctp_supported_ext_param_t),
&ext_param);
- sctp_addto_chunk(retval, num_ext, extensions);
+ sctp_addto_param(retval, num_ext, extensions);
}
if (asoc->peer.prsctp_capable)
sctp_addto_chunk(retval, sizeof(prsctp_param), &prsctp_param);
{
struct sctp_transport *transport = (struct sctp_transport *) arg;
- if (asoc->overall_error_count >= asoc->max_retrans) {
+ if (asoc->overall_error_count > asoc->max_retrans) {
sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
SCTP_ERROR(ETIMEDOUT));
/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
/* Check if the timestamp looks valid. */
if (time_after(hbinfo->sent_at, jiffies) ||
time_after(jiffies, hbinfo->sent_at + max_interval)) {
- SCTP_DEBUG_PRINTK("%s: HEARTBEAT ACK with invalid timestamp"
+ SCTP_DEBUG_PRINTK("%s: HEARTBEAT ACK with invalid timestamp "
"received for transport: %p\n",
__FUNCTION__, link);
return SCTP_DISPOSITION_DISCARD;
struct sctp_endpoint *newep = newsp->ep;
struct sk_buff *skb, *tmp;
struct sctp_ulpevent *event;
- int flags = 0;
+ struct sctp_bind_hashbucket *head;
/* Migrate socket buffer sizes and all the socket level options to the
* new socket.
newsp->hmac = NULL;
/* Hook this new socket in to the bind_hash list. */
+ head = &sctp_port_hashtable[sctp_phashfn(inet_sk(oldsk)->num)];
+ sctp_local_bh_disable();
+ sctp_spin_lock(&head->lock);
pp = sctp_sk(oldsk)->bind_hash;
sk_add_bind_node(newsk, &pp->owner);
sctp_sk(newsk)->bind_hash = pp;
inet_sk(newsk)->num = inet_sk(oldsk)->num;
+ sctp_spin_unlock(&head->lock);
+ sctp_local_bh_enable();
/* Copy the bind_addr list from the original endpoint to the new
* endpoint so that we can handle restarts properly
*/
- if (PF_INET6 == assoc->base.sk->sk_family)
- flags = SCTP_ADDR6_ALLOWED;
- if (assoc->peer.ipv4_address)
- flags |= SCTP_ADDR4_PEERSUPP;
- if (assoc->peer.ipv6_address)
- flags |= SCTP_ADDR6_PEERSUPP;
- sctp_bind_addr_copy(&newsp->ep->base.bind_addr,
- &oldsp->ep->base.bind_addr,
- SCTP_SCOPE_GLOBAL, GFP_KERNEL, flags);
+ sctp_bind_addr_dup(&newsp->ep->base.bind_addr,
+ &oldsp->ep->base.bind_addr, GFP_KERNEL);
/* Move any messages in the old socket's receive queue that are for the
* peeled off association to the new socket's receive queue.
p = gss_fill_context(p, end, ctx, gss_msg->auth->mech);
if (IS_ERR(p)) {
err = PTR_ERR(p);
- gss_msg->msg.errno = (err == -EACCES) ? -EACCES : -EAGAIN;
+ gss_msg->msg.errno = (err == -EAGAIN) ? -EAGAIN : -EACCES;
goto err_release_msg;
}
gss_msg->ctx = gss_get_ctx(ctx);
if (maj_stat == GSS_S_CONTEXT_EXPIRED)
clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags);
if (maj_stat) {
- dprintk("RPC: %5u gss_validate: gss_verify_mic returned"
+ dprintk("RPC: %5u gss_validate: gss_verify_mic returned "
"error 0x%08x\n", task->tk_pid, maj_stat);
goto out_bad;
}
p = simple_get_bytes(p, end, &tmp, sizeof(tmp));
if (IS_ERR(p))
goto out_err_free_ctx;
- if (tmp != SGN_ALG_DES_MAC_MD5)
+ if (tmp != SGN_ALG_DES_MAC_MD5) {
+ p = ERR_PTR(-ENOSYS);
goto out_err_free_ctx;
+ }
p = simple_get_bytes(p, end, &tmp, sizeof(tmp));
if (IS_ERR(p))
goto out_err_free_ctx;
- if (tmp != SEAL_ALG_DES)
+ if (tmp != SEAL_ALG_DES) {
+ p = ERR_PTR(-ENOSYS);
goto out_err_free_ctx;
+ }
p = simple_get_bytes(p, end, &ctx->endtime, sizeof(ctx->endtime));
if (IS_ERR(p))
goto out_err_free_ctx;
u32 seq_send;
dprintk("RPC: gss_krb5_seal\n");
+ BUG_ON(ctx == NULL);
now = get_seconds();
mask = POLLOUT | POLLWRNORM;
if (rpci->ops == NULL)
mask |= POLLERR | POLLHUP;
- if (!list_empty(&rpci->pipe))
+ if (filp->private_data || !list_empty(&rpci->pipe))
mask |= POLLIN | POLLRDNORM;
return mask;
}
static void xprt_connect_status(struct rpc_task *task);
static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *);
-static spinlock_t xprt_list_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(xprt_list_lock);
static LIST_HEAD(xprt_list);
/*
static ctl_table xr_tunables_table[] = {
{
- .ctl_name = CTL_SLOTTABLE_RDMA,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "rdma_slot_table_entries",
.data = &xprt_rdma_slot_table_entries,
.maxlen = sizeof(unsigned int),
.extra2 = &max_slot_table_size
},
{
- .ctl_name = CTL_RDMA_MAXINLINEREAD,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "rdma_max_inline_read",
.data = &xprt_rdma_max_inline_read,
.maxlen = sizeof(unsigned int),
.strategy = &sysctl_intvec,
},
{
- .ctl_name = CTL_RDMA_MAXINLINEWRITE,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "rdma_max_inline_write",
.data = &xprt_rdma_max_inline_write,
.maxlen = sizeof(unsigned int),
.strategy = &sysctl_intvec,
},
{
- .ctl_name = CTL_RDMA_WRITEPADDING,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "rdma_inline_write_padding",
.data = &xprt_rdma_inline_write_padding,
.maxlen = sizeof(unsigned int),
.extra2 = &max_padding,
},
{
- .ctl_name = CTL_RDMA_MEMREG,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "rdma_memreg_strategy",
.data = &xprt_rdma_memreg_strategy,
.maxlen = sizeof(unsigned int),
* @args: rpc transport creation arguments
*
*/
-struct rpc_xprt *xs_setup_udp(struct xprt_create *args)
+static struct rpc_xprt *xs_setup_udp(struct xprt_create *args)
{
struct sockaddr *addr = args->dstaddr;
struct rpc_xprt *xprt;
* @args: rpc transport creation arguments
*
*/
-struct rpc_xprt *xs_setup_tcp(struct xprt_create *args)
+static struct rpc_xprt *xs_setup_tcp(struct xprt_create *args)
{
struct sockaddr *addr = args->dstaddr;
struct rpc_xprt *xprt;
mutex_lock(&u->readlock);
skb = skb_recv_datagram(sk, flags, noblock, &err);
- if (!skb)
+ if (!skb) {
+ unix_state_lock(sk);
+ /* Signal EOF on disconnected non-blocking SEQPACKET socket. */
+ if (sk->sk_type == SOCK_SEQPACKET && err == -EAGAIN &&
+ (sk->sk_shutdown & RCV_SHUTDOWN))
+ err = 0;
+ unix_state_unlock(sk);
goto out_unlock;
+ }
wake_up_interruptible_sync(&u->peer_wait);
rtnl_lock();
ret = wireless_process_ioctl(net, ifr, cmd);
rtnl_unlock();
- if (IW_IS_GET(cmd) && copy_to_user(arg, ifr, sizeof(struct ifreq)))
+ if (IW_IS_GET(cmd) && copy_to_user(arg, ifr, sizeof(struct iwreq)))
return -EFAULT;
return ret;
}
if (sk && sk->sk_policy[XFRM_POLICY_OUT]) {
policy = xfrm_sk_policy_lookup(sk, XFRM_POLICY_OUT, fl);
+ err = PTR_ERR(policy);
if (IS_ERR(policy))
- return PTR_ERR(policy);
+ goto dropdst;
}
if (!policy) {
policy = flow_cache_lookup(fl, dst_orig->ops->family,
dir, xfrm_policy_lookup);
+ err = PTR_ERR(policy);
if (IS_ERR(policy))
- return PTR_ERR(policy);
+ goto dropdst;
}
if (!policy)
xfrm_nr += pols[0]->xfrm_nr;
switch (policy->action) {
+ default:
case XFRM_POLICY_BLOCK:
/* Prohibit the flow */
err = -EPERM;
return 0;
error:
- dst_release(dst_orig);
xfrm_pols_put(pols, npols);
+dropdst:
+ dst_release(dst_orig);
*dst_p = NULL;
return err;
}
* The xfrm_state_alloc call gives a reference, and that
* is what we are dropping here.
*/
- __xfrm_state_put(x);
+ xfrm_state_put(x);
err = 0;
}
struct xfrm_usersa_info *p,
struct sk_buff *skb)
{
- spin_lock_bh(&x->lock);
copy_to_user_state(x, p);
if (x->coaddr)
if (x->lastused)
NLA_PUT_U64(skb, XFRMA_LASTUSED, x->lastused);
- spin_unlock_bh(&x->lock);
if (x->aalg)
NLA_PUT(skb, XFRMA_ALG_AUTH, alg_len(x->aalg), x->aalg);
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.11';
+my $V = '0.12';
use Getopt::Long qw(:config no_auto_abbrev);
my $chk_patch = 1;
my $tst_type = 0;
my $emacs = 0;
+my $terse = 0;
my $file = 0;
my $check = 0;
+my $summary = 1;
+my $mailback = 0;
my $root;
GetOptions(
'q|quiet+' => \$quiet,
'patch!' => \$chk_patch,
'test-type!' => \$tst_type,
'emacs!' => \$emacs,
+ 'terse!' => \$terse,
'file!' => \$file,
'subjective!' => \$check,
'strict!' => \$check,
'root=s' => \$root,
+ 'summary!' => \$summary,
+ 'mailback!' => \$mailback,
) or exit;
my $exit = 0;
print "version: $V\n";
print "options: -q => quiet\n";
print " --no-tree => run without a kernel tree\n";
+ print " --terse => one line per report\n";
print " --emacs => emacs compile window format\n";
print " --file => check a source file\n";
print " --strict => enable more subjective tests\n";
exit(1);
}
+if ($terse) {
+ $emacs = 1;
+ $quiet++;
+}
+
if ($tree) {
if (defined $root) {
if (!top_of_kernel_tree($root)) {
__(?:mem|cpu|dev|)(?:initdata|init)
}x;
our $Inline = qr{inline|__always_inline|noinline};
-our $NonptrType = qr{
- \b
- (?:const\s+)?
- (?:unsigned\s+)?
- (?:
- void|
- char|
- short|
- int|
- long|
- unsigned|
- float|
- double|
- bool|
- long\s+int|
- long\s+long|
- long\s+long\s+int|
- (?:__)?(?:u|s|be|le)(?:8|16|32|64)|
- struct\s+$Ident|
- union\s+$Ident|
- enum\s+$Ident|
- ${Ident}_t|
- ${Ident}_handler|
- ${Ident}_handler_fn
- )
- (?:\s+$Sparse)*
- \b
- }x;
-
-our $Type = qr{
- \b$NonptrType\b
- (?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
- (?:\s+$Sparse|\s+$Attribute)*
- }x;
-our $Declare = qr{(?:$Storage\s+)?$Type};
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/
}x;
-our $Bare = '';
+our $NonptrType;
+our $Type;
+our $Declare;
+
+our @typeList = (
+ qr{void},
+ qr{char},
+ qr{short},
+ qr{int},
+ qr{long},
+ qr{unsigned},
+ qr{float},
+ qr{double},
+ qr{bool},
+ qr{long\s+int},
+ qr{long\s+long},
+ qr{long\s+long\s+int},
+ qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)},
+ qr{struct\s+$Ident},
+ qr{union\s+$Ident},
+ qr{enum\s+$Ident},
+ qr{${Ident}_t},
+ qr{${Ident}_handler},
+ qr{${Ident}_handler_fn},
+);
+
+sub build_types {
+ my $all = "(?: \n" . join("|\n ", @typeList) . "\n)";
+ $NonptrType = qr{
+ \b
+ (?:const\s+)?
+ (?:unsigned\s+)?
+ $all
+ (?:\s+$Sparse|\s+const)*
+ \b
+ }x;
+ $Type = qr{
+ \b$NonptrType\b
+ (?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
+ (?:\s+$Sparse|\s+$Attribute)*
+ }x;
+ $Declare = qr{(?:$Storage\s+)?$Type};
+}
+build_types();
$chk_signoff = 0 if ($file);
return $res;
}
+sub ctx_statement_block {
+ my ($linenr, $remain, $off) = @_;
+ my $line = $linenr - 1;
+ my $blk = '';
+ my $soff = $off;
+ my $coff = $off - 1;
+
+ my $type = '';
+ my $level = 0;
+ my $c;
+ my $len = 0;
+ while (1) {
+ #warn "CSB: blk<$blk>\n";
+ # If we are about to drop off the end, pull in more
+ # context.
+ if ($off >= $len) {
+ for (; $remain > 0; $line++) {
+ next if ($rawlines[$line] =~ /^-/);
+ $remain--;
+ $blk .= sanitise_line($rawlines[$line]) . "\n";
+ $len = length($blk);
+ $line++;
+ last;
+ }
+ # Bail if there is no further context.
+ #warn "CSB: blk<$blk> off<$off> len<$len>\n";
+ if ($off == $len) {
+ last;
+ }
+ }
+ $c = substr($blk, $off, 1);
+
+ #warn "CSB: c<$c> type<$type> level<$level>\n";
+ # Statement ends at the ';' or a close '}' at the
+ # outermost level.
+ if ($level == 0 && $c eq ';') {
+ last;
+ }
+
+ if (($type eq '' || $type eq '(') && $c eq '(') {
+ $level++;
+ $type = '(';
+ }
+ if ($type eq '(' && $c eq ')') {
+ $level--;
+ $type = ($level != 0)? '(' : '';
+
+ if ($level == 0 && $coff < $soff) {
+ $coff = $off;
+ }
+ }
+ if (($type eq '' || $type eq '{') && $c eq '{') {
+ $level++;
+ $type = '{';
+ }
+ if ($type eq '{' && $c eq '}') {
+ $level--;
+ $type = ($level != 0)? '{' : '';
+
+ if ($level == 0) {
+ last;
+ }
+ }
+ $off++;
+ }
+
+ my $statement = substr($blk, $soff, $off - $soff + 1);
+ my $condition = substr($blk, $soff, $coff - $soff + 1);
+
+ #warn "STATEMENT<$statement>\n";
+ #warn "CONDITION<$condition>\n";
+
+ return ($statement, $condition);
+}
+
sub ctx_block_get {
my ($linenr, $remain, $outer, $open, $close, $off) = @_;
my $line;
my $paren = 0;
my @paren_type;
- # Include any user defined types we may have found as we went.
- my $type_match = "(?:$Type$Bare)";
-
while (length($cur)) {
print " <$type> " if ($debug);
if ($cur =~ /^(\s+)/o) {
$type = 'N';
}
- } elsif ($cur =~ /^($type_match)/) {
+ } elsif ($cur =~ /^($Type)/) {
print "DECLARE($1)\n" if ($debug);
$type = 'T';
}
$type = 'N';
- } elsif ($cur =~ /^(if|while|typeof)\b/o) {
+ } elsif ($cur =~ /^(if|while|typeof|for)\b/o) {
print "COND($1)\n" if ($debug);
$paren_type[$paren] = 'N';
$type = 'N';
return $res;
}
+sub possible {
+ my ($possible) = @_;
+
+ #print "CHECK<$possible>\n";
+ if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
+ $possible ne 'goto' && $possible ne 'return' &&
+ $possible ne 'struct' && $possible ne 'enum' &&
+ $possible ne 'case' && $possible ne 'else' &&
+ $possible ne 'typedef') {
+ #print "POSSIBLE<$possible>\n";
+ push(@typeList, $possible);
+ build_types();
+ }
+}
+
my $prefix = '';
my @report = ();
sub report {
- push(@report, $prefix . $_[0]);
+ my $line = $prefix . $_[0];
+
+ $line = (split('\n', $line))[0] . "\n" if ($terse);
+
+ push(@report, $line);
}
sub report_dump {
@report;
my $prev_values = 'N';
- # Possible bare types.
- my @bare = ();
-
# Pre-scan the patch looking for any __setup documentation.
my @setup_docs = ();
my $setup_docs = 0;
$realline++;
$realcnt-- if ($realcnt != 0);
- # track any sort of multi-line comment. Obviously if
- # the added text or context do not include the whole
- # comment we will not see it. Such is life.
- #
+ # Guestimate if this is a continuing comment. Run
+ # the context looking for a comment "edge". If this
+ # edge is a close comment then we must be in a comment
+ # at context start.
+ if ($linenr == $first_line) {
+ my $edge;
+ for (my $ln = $first_line; $ln < ($linenr + $realcnt); $ln++) {
+ ($edge) = ($lines[$ln - 1] =~ m@(/\*|\*/)@);
+ last if (defined $edge);
+ }
+ if (defined $edge && $edge eq '*/') {
+ $in_comment = 1;
+ }
+ }
+
# Guestimate if this is a continuing comment. If this
# is the start of a diff block and this line starts
# ' *' then it is very likely a comment.
if ($linenr == $first_line and $line =~ m@^.\s*\*@) {
$in_comment = 1;
}
- if ($line =~ m@/\*@) {
- $in_comment = 1;
- }
- if ($line =~ m@\*/@) {
- $in_comment = 0;
+
+ # Find the last comment edge on _this_ line.
+ while (($line =~ m@(/\*|\*/)@g)) {
+ if ($1 eq '/*') {
+ $in_comment = 1;
+ } else {
+ $in_comment = 0;
+ }
}
# Measure the line length and indent.
}
# Check for wrappage within a valid hunk of the file
- if ($realcnt != 0 && $line !~ m{^(?:\+|-| |$)}) {
+ if ($realcnt != 0 && $line !~ m{^(?:\+|-| |\\ No newline|$)}) {
ERROR("patch seems to be corrupt (line wrapped?)\n" .
$herecurr) if (!$emitted_corrupt++);
}
WARN("line over 80 characters\n" . $herecurr);
}
+# check for adding lines without a newline.
+ if ($line =~ /^\+/ && defined $lines[$linenr] && $lines[$linenr] =~ /^\\ No newline at end of file/) {
+ WARN("adding a line without newline at end of file\n" . $herecurr);
+ }
+
# check we are in a valid source file *.[hc] if not then ignore this hunk
next if ($realfile !~ /\.[hc]$/);
# Check for potential 'bare' types
if ($realcnt &&
- $line !~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?$Type\b/ &&
$line !~ /$Ident:\s*$/ &&
- $line !~ /^.\s*$Ident\s*\(/ &&
- # definitions in global scope can only start with types
- ($line =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?($Ident)\b/ ||
- # declarations always start with types
- $line =~ /^.\s*(?:$Storage\s+)?($Ident)\b\s*\**\s*$Ident\s*(?:;|=)/) ||
- # any (foo ... *) is a pointer cast, and foo is a type
- $line =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/) {
- my $possible = $1;
- if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
- $possible ne 'goto' && $possible ne 'return' &&
- $possible ne 'struct' && $possible ne 'enum' &&
- $possible ne 'case' && $possible ne 'else' &&
- $possible ne 'typedef') {
- #print "POSSIBLE<$possible>\n";
- push(@bare, $possible);
- my $bare = join("|", @bare);
- $Bare = '|' . qr{
- \b(?:$bare)\b
- (?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
- (?:\s+$Sparse)*
- }x;
+ ($line =~ /^.\s*$Ident\s*\(\*+\s*$Ident\)\s*\(/ ||
+ $line !~ /^.\s*$Ident\s*\(/)) {
+ # definitions in global scope can only start with types
+ if ($line =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
+ possible($1);
+
+ # declarations always start with types
+ } elsif ($prev_values eq 'N' && $line =~ /^.\s*(?:$Storage\s+)?($Ident)\b\s*\**\s*$Ident\s*(?:;|=)/) {
+ possible($1);
+
+ # any (foo ... *) is a pointer cast, and foo is a type
+ } elsif ($line =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/) {
+ possible($1);
+ }
+
+ # Check for any sort of function declaration.
+ # int foo(something bar, other baz);
+ # void (*store_gdt)(x86_descr_ptr *);
+ if ($prev_values eq 'N' && $line =~ /^(.(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
+ my ($name_len) = length($1);
+ my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, $name_len);
+ my $ctx = join("\n", @ctx);
+
+ $ctx =~ s/\n.//;
+ substr($ctx, 0, $name_len + 1) = '';
+ $ctx =~ s/\)[^\)]*$//;
+ for my $arg (split(/\s*,\s*/, $ctx)) {
+ if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
+
+ possible($1);
+ }
+ }
}
+
}
#
# $clean = 0;
# }
+ if ($line =~ /\bLINUX_VERSION_CODE\b/) {
+ WARN("LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged" . $herecurr);
+ }
+
# printk should use KERN_* levels. Note that follow on printk's on the
# same line do not need a level, so we use the current block context
# to try and find and validate the current printk. In summary the current
ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
+# open braces for enum, union and struct go on the same line.
+ if ($line =~ /^.\s*{/ &&
+ $prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) {
+ ERROR("open brace '{' following $1 go on the same line\n" . $hereprev);
+ }
+
# check for spaces between functions and their parentheses.
while ($line =~ /($Ident)\s+\(/g) {
if ($1 !~ /^(?:if|for|while|switch|return|volatile|__volatile__|__attribute__|format|__extension__|Copyright|case)$/ &&
}
# Check for illegal assignment in if conditional.
- if ($line=~/\bif\s*\(.*[^<>!=]=[^=]/) {
- #next if ($line=~/\".*\Q$op\E.*\"/ or $line=~/\'\Q$op\E\'/);
- ERROR("do not use assignment in if condition\n" . $herecurr);
+ if ($line =~ /\bif\s*\(/) {
+ my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
+
+ if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/) {
+ ERROR("do not use assignment in if condition ($c)\n" . $herecurr);
+ }
+
+ # Find out what is on the end of the line after the
+ # conditional.
+ substr($s, 0, length($c)) = '';
+ $s =~ s/\n.*//g;
+
+ if (length($c) && $s !~ /^\s*({|;|\/\*.*\*\/)?\s*\\*\s*$/) {
+ ERROR("trailing statements should be on next line\n" . $herecurr);
+ }
+ }
+
+# if and else should not have general statements after it
+ if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/ &&
+ $1 !~ /^\s*(?:\sif|{|\\|$)/) {
+ ERROR("trailing statements should be on next line\n" . $herecurr);
}
# Check for }<nl>else {, these must be at the same
}
}
-# if and else should not have general statements after it
- if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/ &&
- $1 !~ /^\s*(?:\sif|{|\\|$)/) {
- ERROR("trailing statements should be on next line\n" . $herecurr);
- }
-
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
# in a known goot container
$off = length($1);
$ln--;
$cnt++;
+ while ($lines[$ln - 1] =~ /^-/) {
+ $ln--;
+ $cnt++;
+ }
}
my @ctx = ctx_statement($ln, $cnt, $off);
my $ctx_ln = $ln + $#ctx + 1;
if ($lines[$nr - 1] =~ /{\s*$/) {
my ($lvl, @block) = ctx_block_level($nr, $cnt);
- my $stmt = join(' ', @block);
- $stmt =~ s/(^[^{]*){//;
+ my $stmt = join("\n", @block);
+ # Drop the diff line leader.
+ $stmt =~ s/\n./\n/g;
+ # Drop the code outside the block.
+ $stmt =~ s/(^[^{]*){\s*//;
my $before = $1;
- $stmt =~ s/}([^}]*$)//;
+ $stmt =~ s/\s*}([^}]*$)//;
my $after = $1;
#print "block<" . join(' ', @block) . "><" . scalar(@block) . ">\n";
#print "stmt<$stmt>\n\n";
- # Count the ;'s if there is fewer than two
- # then there can only be one statement,
- # if there is a brace inside we cannot
- # trivially detect if its one statement.
- # Also nested if's often require braces to
- # disambiguate the else binding so shhh there.
- my @semi = ($stmt =~ /;/g);
- push(@semi, "/**/") if ($stmt =~ m@/\*@);
- ##print "semi<" . scalar(@semi) . ">\n";
- if ($lvl == 0 && scalar(@semi) < 2 &&
+ # Count the newlines, if there is only one
+ # then the block should not have {}'s.
+ my @lines = ($stmt =~ /\n/g);
+ #print "lines<" . scalar(@lines) . ">\n";
+ if ($lvl == 0 && scalar(@lines) == 0 &&
$stmt !~ /{/ && $stmt !~ /\bif\b/ &&
$before !~ /}/ && $after !~ /{/) {
my $herectx = "$here\n" . join("\n", @control, @block[1 .. $#block]) . "\n";
ERROR("inline keyword should sit between storage class and type\n" . $herecurr);
}
+# Check for __inline__ and __inline, prefer inline
+ if ($line =~ /\b(__inline__|__inline)\b/) {
+ WARN("plain inline is preferred over $1\n" . $herecurr);
+ }
+
# check for new externs in .c files.
if ($line =~ /^.\s*extern\s/ && ($realfile =~ /\.c$/)) {
WARN("externs should be avoided in .c files\n" . $herecurr);
}
}
- if ($chk_patch && !$is_patch) {
+ # In mailback mode only produce a report in the negative, for
+ # things that appear to be patches.
+ if ($mailback && ($clean == 1 || !$is_patch)) {
+ exit(0);
+ }
+
+ # This is not a patch, and we are are in 'no-patch' mode so
+ # just keep quiet.
+ if (!$chk_patch && !$is_patch) {
+ exit(0);
+ }
+
+ if (!$is_patch) {
ERROR("Does not appear to be a unified-diff format patch\n");
}
if ($is_patch && $chk_signoff && $signoff == 0) {
ERROR("Missing Signed-off-by: line(s)\n");
}
- if ($clean == 0 && ($chk_patch || $is_patch)) {
- print report_dump();
- if ($quiet < 2) {
- print "total: $cnt_error errors, $cnt_warn warnings, " .
- (($check)? "$cnt_chk checks, " : "") .
- "$cnt_lines lines checked\n";
- }
+ print report_dump();
+ if ($summary) {
+ print "total: $cnt_error errors, $cnt_warn warnings, " .
+ (($check)? "$cnt_chk checks, " : "") .
+ "$cnt_lines lines checked\n";
+ print "\n" if ($quiet == 0);
}
+
if ($clean == 1 && $quiet == 0) {
print "Your patch has no obvious style problems and is ready for submission.\n"
}
test ! -r $2/Makefile -o -O $2/Makefile || exit 0
+# Only overwrite automatically generated Makefiles
+# (so we do not overwrite kernel Makefile)
+if ! grep -q Automatically $2/Makefile
+then
+ exit 0
+fi
echo " GEN $2/Makefile"
cat << EOF > $2/Makefile
if (info != SEND_SIG_NOINFO && (is_si_special(info) || SI_FROMKERNEL(info)))
return 0;
+ /*
+ * Running a setuid root program raises your capabilities.
+ * Killing your own setuid root processes was previously
+ * allowed.
+ * We must preserve legacy signal behavior in this case.
+ */
+ if (p->euid == 0 && p->uid == current->uid)
+ return 0;
+
/* sigcont is permitted within same session */
if (sig == SIGCONT && (task_session_nr(current) == task_session_nr(p)))
return 0;
unsigned long addr,
unsigned long addr_only)
{
- if (addr < mmap_min_addr)
+ if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
return -EACCES;
return 0;
}
/* global data for booleans */
static struct dentry *bool_dir = NULL;
static int bool_num = 0;
+static char **bool_pending_names;
static int *bool_pending_values = NULL;
/* global data for classes */
ssize_t length;
ssize_t ret;
int cur_enforcing;
- struct inode *inode;
+ struct inode *inode = filep->f_path.dentry->d_inode;
+ unsigned index = inode->i_ino & SEL_INO_MASK;
+ const char *name = filep->f_path.dentry->d_name.name;
mutex_lock(&sel_mutex);
- ret = -EFAULT;
-
- /* check to see if this file has been deleted */
- if (!filep->f_op)
+ if (index >= bool_num || strcmp(name, bool_pending_names[index])) {
+ ret = -EINVAL;
goto out;
+ }
if (count > PAGE_SIZE) {
ret = -EINVAL;
goto out;
}
- inode = filep->f_path.dentry->d_inode;
- cur_enforcing = security_get_bool_value(inode->i_ino&SEL_INO_MASK);
+ cur_enforcing = security_get_bool_value(index);
if (cur_enforcing < 0) {
ret = cur_enforcing;
goto out;
}
-
length = scnprintf(page, PAGE_SIZE, "%d %d", cur_enforcing,
- bool_pending_values[inode->i_ino&SEL_INO_MASK]);
+ bool_pending_values[index]);
ret = simple_read_from_buffer(buf, count, ppos, page, length);
out:
mutex_unlock(&sel_mutex);
size_t count, loff_t *ppos)
{
char *page = NULL;
- ssize_t length = -EFAULT;
+ ssize_t length;
int new_value;
- struct inode *inode;
+ struct inode *inode = filep->f_path.dentry->d_inode;
+ unsigned index = inode->i_ino & SEL_INO_MASK;
+ const char *name = filep->f_path.dentry->d_name.name;
mutex_lock(&sel_mutex);
if (length)
goto out;
- /* check to see if this file has been deleted */
- if (!filep->f_op)
+ if (index >= bool_num || strcmp(name, bool_pending_names[index])) {
+ length = -EINVAL;
goto out;
+ }
if (count >= PAGE_SIZE) {
length = -ENOMEM;
goto out;
}
+
if (*ppos != 0) {
/* No partial writes. */
+ length = -EINVAL;
goto out;
}
page = (char*)get_zeroed_page(GFP_KERNEL);
goto out;
}
+ length = -EFAULT;
if (copy_from_user(page, buf, count))
goto out;
if (new_value)
new_value = 1;
- inode = filep->f_path.dentry->d_inode;
- bool_pending_values[inode->i_ino&SEL_INO_MASK] = new_value;
+ bool_pending_values[index] = new_value;
length = count;
out:
size_t count, loff_t *ppos)
{
char *page = NULL;
- ssize_t length = -EFAULT;
+ ssize_t length;
int new_value;
mutex_lock(&sel_mutex);
if (length)
goto out;
- /* check to see if this file has been deleted */
- if (!filep->f_op)
- goto out;
-
if (count >= PAGE_SIZE) {
length = -ENOMEM;
goto out;
goto out;
}
+ length = -EFAULT;
if (copy_from_user(page, buf, count))
goto out;
.write = sel_commit_bools_write,
};
-/* partial revoke() from fs/proc/generic.c proc_kill_inodes */
static void sel_remove_entries(struct dentry *de)
{
- struct list_head *p, *node;
- struct super_block *sb = de->d_sb;
+ struct list_head *node;
spin_lock(&dcache_lock);
node = de->d_subdirs.next;
}
spin_unlock(&dcache_lock);
-
- file_list_lock();
- list_for_each(p, &sb->s_files) {
- struct file * filp = list_entry(p, struct file, f_u.fu_list);
- struct dentry * dentry = filp->f_path.dentry;
-
- if (dentry->d_parent != de) {
- continue;
- }
- filp->f_op = NULL;
- }
- file_list_unlock();
}
#define BOOL_DIR_NAME "booleans"
u32 sid;
/* remove any existing files */
+ kfree(bool_pending_names);
kfree(bool_pending_values);
+ bool_pending_names = NULL;
bool_pending_values = NULL;
sel_remove_entries(dir);
d_add(dentry, inode);
}
bool_num = num;
+ bool_pending_names = names;
bool_pending_values = values;
out:
free_page((unsigned long)page);
+ return ret;
+err:
if (names) {
for (i = 0; i < num; i++)
kfree(names[i]);
kfree(names);
}
- return ret;
-err:
kfree(values);
sel_remove_entries(dir);
ret = -ENOMEM;
static void uart_interrupt_tx(struct snd_mpu401 *mpu)
{
+ unsigned long flags;
+
if (test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode) &&
test_bit(MPU401_MODE_BIT_OUTPUT_TRIGGER, &mpu->mode)) {
- spin_lock(&mpu->output_lock);
+ spin_lock_irqsave(&mpu->output_lock, flags);
snd_mpu401_uart_output_write(mpu);
- spin_unlock(&mpu->output_lock);
+ spin_unlock_irqrestore(&mpu->output_lock, flags);
}
}
static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu)
{
+ unsigned long flags;
+
if (mpu->info_flags & MPU401_INFO_INPUT) {
- spin_lock(&mpu->input_lock);
+ spin_lock_irqsave(&mpu->input_lock, flags);
if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode))
snd_mpu401_uart_input_read(mpu);
else
snd_mpu401_uart_clear_rx(mpu);
- spin_unlock(&mpu->input_lock);
+ spin_unlock_irqrestore(&mpu->input_lock, flags);
}
if (! (mpu->info_flags & MPU401_INFO_TX_IRQ))
/* ok. for better Tx performance try do some output
parport_release(pardev);
parport_unregister_device(pardev);
- return res;
+ return res ? -EIO : 0;
}
static void __devinit snd_portman_attach(struct parport *p)
{
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
- ucontrol->value.enumerated.item[0] = emu->spdif_enable;
+ ucontrol->value.integer.value[0] = emu->spdif_enable;
return 0;
}
int change = 0;
u32 mask;
- val = ucontrol->value.enumerated.item[0] ;
+ val = !!ucontrol->value.integer.value[0];
change = (emu->spdif_enable != val);
if (change) {
emu->spdif_enable = val;
- if (val == 1) {
+ if (val) {
/* Digital */
snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x0b000000);
u32 source;
val = ucontrol->value.enumerated.item[0] ;
+ if (val >= 6)
+ return -EINVAL;
change = (emu->capture_source != val);
if (change) {
emu->capture_source = val;
* for the particular source.
*/
source_id = ucontrol->value.enumerated.item[0] ;
+ if (source_id >= 4)
+ return -EINVAL;
change = (emu->i2c_capture_source != source_id);
if (change) {
snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
u32 tmp;
val = ucontrol->value.enumerated.item[0] ;
+ if (val > 1)
+ return -EINVAL;
change = (emu->capture_mic_line_in != val);
if (change) {
emu->capture_mic_line_in = val;
ogain = emu->i2c_capture_volume[source_id][0]; /* Left */
ngain = ucontrol->value.integer.value[0];
if (ngain > 0xff)
- return 0;
+ return -EINVAL;
if (ogain != ngain) {
if (emu->i2c_capture_source == source_id)
snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff) );
ogain = emu->i2c_capture_volume[source_id][1]; /* Right */
ngain = ucontrol->value.integer.value[1];
if (ngain > 0xff)
- return 0;
+ return -EINVAL;
if (ogain != ngain) {
if (emu->i2c_capture_source == source_id)
snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
}
ret = snd_ca0106_spi_write(emu, emu->spi_dac_reg[reg]);
- return ret ? -1 : 1;
+ return ret ? -EINVAL : 1;
}
#define CA_VOLUME(xname,chid,reg) \
snd_info_set_text_ops(entry, emu, snd_ca0106_proc_reg_read1);
entry->c.text.write = snd_ca0106_proc_reg_write;
entry->mode |= S_IWUSR;
-// entry->private_data = emu;
}
if(! snd_card_proc_new(emu->card, "ca0106_i2c", &entry)) {
- snd_info_set_text_ops(entry, emu, snd_ca0106_proc_i2c_write);
entry->c.text.write = snd_ca0106_proc_i2c_write;
+ entry->private_data = emu;
entry->mode |= S_IWUSR;
-// entry->private_data = emu;
}
if(! snd_card_proc_new(emu->card, "ca0106_regs2", &entry))
snd_info_set_text_ops(entry, emu, snd_ca0106_proc_reg_read2);
#define CM_MMODE_MASK 0x00000E00 /* model DAA interface mode */
#define CM_SPDIF_SELECT2 0x00000100 /* for model > 039 ? */
#define CM_ENCENTER 0x00000080
-#define CM_FLINKON 0x00000080 /* force modem link detection on, model 037 */
+#define CM_FLINKON 0x00000040 /* force modem link detection on, model 037 */
#define CM_MUTECH1 0x00000040 /* mute PCI ch1 to DAC */
-#define CM_FLINKOFF 0x00000040 /* force modem link detection off, model 037 */
-#define CM_UNKNOWN_18_5 0x00000020 /* ? */
+#define CM_FLINKOFF 0x00000020 /* force modem link detection off, model 037 */
#define CM_MIDSMP 0x00000010 /* 1/2 interpolation at front end DAC */
#define CM_UPDDMA_MASK 0x0000000C /* TDMA position update notification */
#define CM_UPDDMA_2048 0x00000000
unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
unsigned long flags;
+ /* Limit: emu->spdif_bits */
+ if (idx >= 3)
+ return -EINVAL;
spin_lock_irqsave(&emu->reg_lock, flags);
ucontrol->value.iec958.status[0] = (emu->spdif_bits[idx] >> 0) & 0xff;
ucontrol->value.iec958.status[1] = (emu->spdif_bits[idx] >> 8) & 0xff;
struct snd_ctl_elem_value *ucontrol)
{
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
- int channel;
+ unsigned int channel;
channel = (kcontrol->private_value) & 0xff;
+ /* Limit: emu1010_output_dst, emu->emu1010.output_source */
+ if (channel >= 24)
+ return -EINVAL;
ucontrol->value.enumerated.item[0] = emu->emu1010.output_source[channel];
return 0;
}
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
int change = 0;
unsigned int val;
- int channel;
+ unsigned int channel;
+ val = ucontrol->value.enumerated.item[0];
+ if (val >= 53)
+ return -EINVAL;
channel = (kcontrol->private_value) & 0xff;
- if (emu->emu1010.output_source[channel] != ucontrol->value.enumerated.item[0]) {
- val = emu->emu1010.output_source[channel] = ucontrol->value.enumerated.item[0];
+ /* Limit: emu1010_output_dst, emu->emu1010.output_source */
+ if (channel >= 24)
+ return -EINVAL;
+ if (emu->emu1010.output_source[channel] != val) {
+ emu->emu1010.output_source[channel] = val;
change = 1;
snd_emu1010_fpga_link_dst_src_write(emu,
emu1010_output_dst[channel], emu1010_src_regs[val]);
struct snd_ctl_elem_value *ucontrol)
{
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
- int channel;
+ unsigned int channel;
channel = (kcontrol->private_value) & 0xff;
+ /* Limit: emu1010_input_dst, emu->emu1010.input_source */
+ if (channel >= 22)
+ return -EINVAL;
ucontrol->value.enumerated.item[0] = emu->emu1010.input_source[channel];
return 0;
}
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
int change = 0;
unsigned int val;
- int channel;
+ unsigned int channel;
+ val = ucontrol->value.enumerated.item[0];
+ if (val >= 53)
+ return -EINVAL;
channel = (kcontrol->private_value) & 0xff;
- if (emu->emu1010.input_source[channel] != ucontrol->value.enumerated.item[0]) {
- val = emu->emu1010.input_source[channel] = ucontrol->value.enumerated.item[0];
+ /* Limit: emu1010_input_dst, emu->emu1010.input_source */
+ if (channel >= 22)
+ return -EINVAL;
+ if (emu->emu1010.input_source[channel] != val) {
+ emu->emu1010.input_source[channel] = val;
change = 1;
snd_emu1010_fpga_link_dst_src_write(emu,
emu1010_input_dst[channel], emu1010_src_regs[val]);
int change = 0;
val = ucontrol->value.enumerated.item[0] ;
+ /* Limit: uinfo->value.enumerated.items = 4; */
+ if (val >= 4)
+ return -EINVAL;
change = (emu->emu1010.internal_clock != val);
if (change) {
emu->emu1010.internal_clock = val;
* update the capture volume from the cached value
* for the particular source.
*/
- source_id = ucontrol->value.enumerated.item[0]; /* Use 2 and 3 */
+ source_id = ucontrol->value.enumerated.item[0];
+ /* Limit: uinfo->value.enumerated.items = 2; */
+ /* emu->i2c_capture_volume */
+ if (source_id >= 2)
+ return -EINVAL;
change = (emu->i2c_capture_source != source_id);
if (change) {
snd_emu10k1_i2c_write(emu, ADC_MUX, 0); /* Mute input */
struct snd_ctl_elem_value *ucontrol)
{
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
- int source_id;
+ unsigned int source_id;
source_id = kcontrol->private_value;
+ /* Limit: emu->i2c_capture_volume */
+ /* capture_source: uinfo->value.enumerated.items = 2 */
+ if (source_id >= 2)
+ return -EINVAL;
ucontrol->value.integer.value[0] = emu->i2c_capture_volume[source_id][0];
ucontrol->value.integer.value[1] = emu->i2c_capture_volume[source_id][1];
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
unsigned int ogain;
unsigned int ngain;
- int source_id;
+ unsigned int source_id;
int change = 0;
source_id = kcontrol->private_value;
+ /* Limit: emu->i2c_capture_volume */
+ /* capture_source: uinfo->value.enumerated.items = 2 */
+ if (source_id >= 2)
+ return -EINVAL;
ogain = emu->i2c_capture_volume[source_id][0]; /* Left */
ngain = ucontrol->value.integer.value[0];
if (ngain > 0xff)
if (ogain != ngain) {
if (emu->i2c_capture_source == source_id)
snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff) );
- emu->i2c_capture_volume[source_id][0] = ucontrol->value.integer.value[0];
+ emu->i2c_capture_volume[source_id][0] = ngain;
change = 1;
}
ogain = emu->i2c_capture_volume[source_id][1]; /* Right */
if (ogain != ngain) {
if (emu->i2c_capture_source == source_id)
snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
- emu->i2c_capture_volume[source_id][1] = ucontrol->value.integer.value[1];
+ emu->i2c_capture_volume[source_id][1] = ngain;
change = 1;
}
unsigned int val;
unsigned long flags;
+ /* Limit: emu->spdif_bits */
+ if (idx >= 3)
+ return -EINVAL;
val = (ucontrol->value.iec958.status[0] << 0) |
(ucontrol->value.iec958.status[1] << 8) |
(ucontrol->value.iec958.status[2] << 16) |
u32 source;
val = ucontrol->value.enumerated.item[0] ;
+ if (val > 7)
+ return -EINVAL;
change = (emu->p16v_capture_source != val);
if (change) {
emu->p16v_capture_source = val;
u32 tmp;
val = ucontrol->value.enumerated.item[0] ;
+ if (val > 3)
+ return -EINVAL;
change = (emu->p16v_capture_channel != val);
if (change) {
emu->p16v_capture_channel = val;
nid = codec->start_nid;
for (i = 0; i < codec->num_nodes; i++, nid++) {
- if (get_wcaps(codec, nid) & AC_WCAP_POWER) {
- unsigned int pincap;
- /*
- * don't power down the widget if it controls eapd
- * and EAPD_BTLENABLE is set.
- */
- pincap = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
- if (pincap & AC_PINCAP_EAPD) {
- int eapd = snd_hda_codec_read(codec, nid,
- 0, AC_VERB_GET_EAPD_BTLENABLE, 0);
- eapd &= 0x02;
- if (power_state == AC_PWRST_D3 && eapd)
- continue;
+ unsigned int wcaps = get_wcaps(codec, nid);
+ if (wcaps & AC_WCAP_POWER) {
+ unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
+ AC_WCAP_TYPE_SHIFT;
+ if (wid_type == AC_WID_PIN) {
+ unsigned int pincap;
+ /*
+ * don't power down the widget if it controls
+ * eapd and EAPD_BTLENABLE is set.
+ */
+ pincap = snd_hda_param_read(codec, nid,
+ AC_PAR_PIN_CAP);
+ if (pincap & AC_PINCAP_EAPD) {
+ int eapd = snd_hda_codec_read(codec,
+ nid, 0,
+ AC_VERB_GET_EAPD_BTLENABLE, 0);
+ eapd &= 0x02;
+ if (power_state == AC_PWRST_D3 && eapd)
+ continue;
+ }
}
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_POWER_STATE,
/* front */
snd_hda_codec_setup_stream(codec, nids[HDA_FRONT], stream_tag,
0, format);
- if (mout->hp_nid && mout->hp_nid != nids[HDA_FRONT])
+ if (!mout->no_share_stream &&
+ mout->hp_nid && mout->hp_nid != nids[HDA_FRONT])
/* headphone out will just decode front left/right (stereo) */
snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag,
0, format);
/* extra outputs copied from front */
for (i = 0; i < ARRAY_SIZE(mout->extra_out_nid); i++)
- if (mout->extra_out_nid[i])
+ if (!mout->no_share_stream && mout->extra_out_nid[i])
snd_hda_codec_setup_stream(codec,
mout->extra_out_nid[i],
stream_tag, 0, format);
if (chs >= (i + 1) * 2) /* independent out */
snd_hda_codec_setup_stream(codec, nids[i], stream_tag,
i * 2, format);
- else /* copy front */
+ else if (!mout->no_share_stream) /* copy front */
snd_hda_codec_setup_stream(codec, nids[i], stream_tag,
0, format);
}
hda_nid_t dig_out_nid; /* digital out audio widget */
int max_channels; /* currently supported analog channels */
int dig_out_used; /* current usage of digital out (HDA_DIG_XXX) */
+ int no_share_stream; /* don't share a stream with multiple pins */
};
int snd_hda_multi_out_dig_open(struct hda_codec *codec,
break;
}
+ /* AD1986A has a hardware problem that it can't share a stream
+ * with multiple output pins. The copy of front to surrounds
+ * causes noisy or silent outputs at a certain timing, e.g.
+ * changing the volume.
+ * So, let's disable the shared stream.
+ */
+ spec->multiout.no_share_stream = 1;
+
return 0;
}
unsigned int alt_switch: 1;
unsigned int hp_detect: 1;
unsigned int gpio_mute: 1;
- unsigned int no_vol_knob :1;
unsigned int gpio_mask, gpio_data;
return 1;
}
-static int stac92xx_volknob_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 127;
- return 0;
-}
-
-static int stac92xx_volknob_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = kcontrol->private_value & 0xff;
- return 0;
-}
-
-static int stac92xx_volknob_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- unsigned int val = kcontrol->private_value & 0xff;
-
- if (val == ucontrol->value.integer.value[0])
- return 0;
-
- val = ucontrol->value.integer.value[0];
- kcontrol->private_value &= ~0xff;
- kcontrol->private_value |= val;
-
- snd_hda_codec_write_cache(codec, kcontrol->private_value >> 16, 0,
- AC_VERB_SET_VOLUME_KNOB_CONTROL, val | 0x80);
- return 1;
-}
-
-
static struct hda_verb stac9200_core_init[] = {
/* set dac0mux for dac converter */
{ 0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
.private_value = verb_read | (verb_write << 16), \
}
-#define STAC_VOLKNOB(knob_nid) \
- { \
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = "Master Playback Volume", \
- .count = 1, \
- .info = stac92xx_volknob_info, \
- .get = stac92xx_volknob_get, \
- .put = stac92xx_volknob_put, \
- .private_value = 127 | (knob_nid << 16), \
- }
-
-
static struct snd_kcontrol_new stac9200_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
},
STAC_INPUT_SOURCE(2),
STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0),
- STAC_VOLKNOB(0x24),
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1d, 0x0, HDA_OUTPUT),
/* This needs to be generated dynamically based on sequence */
static struct snd_kcontrol_new stac922x_mixer[] = {
STAC_INPUT_SOURCE(2),
- STAC_VOLKNOB(0x16),
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Mux Capture Volume", 0x0, 0x12, 0x0, HDA_OUTPUT),
static struct snd_kcontrol_new stac927x_mixer[] = {
STAC_INPUT_SOURCE(3),
- STAC_VOLKNOB(0x24),
STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB),
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT),
}
if (spec->multiout.hp_nid) {
const char *pfx;
- if (old_num_dacs == spec->multiout.num_dacs &&
- spec->no_vol_knob)
+ if (old_num_dacs == spec->multiout.num_dacs)
pfx = "Master";
else
pfx = "Headphone";
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
spec->pin_nids = stac9200_pin_nids;
- spec->no_vol_knob = 1;
spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS,
stac9200_models,
stac9200_cfg_tbl);
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
spec->pin_nids = stac925x_pin_nids;
- spec->no_vol_knob = 1;
spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS,
stac925x_models,
stac925x_cfg_tbl);
codec->owner = THIS_MODULE;
codec->dai = &cs4270_dai;
codec->num_dai = 1;
- codec->private_data = codec + ALIGN(sizeof(struct snd_soc_codec), 4);
+ codec->private_data = (void *) codec +
+ ALIGN(sizeof(struct snd_soc_codec), 4);
socdev->codec = codec;
#include <asm/hardware.h>
#include <asm/io.h>
-#include <asm/arch/regs-ac97.h>
+#include <asm/plat-s3c/regs-ac97.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/audio.h>
git.samba.org / sfrench / cifs-2.6.git / commitdiff