phy: sr-usb: Add Stingray USB PHY driver
authorSrinath Mannam <srinath.mannam@broadcom.com>
Tue, 19 Mar 2019 09:15:43 +0000 (14:45 +0530)
committerKishon Vijay Abraham I <kishon@ti.com>
Wed, 17 Apr 2019 08:42:48 +0000 (14:12 +0530)
USB PHY driver supports two types of stingray USB PHYs
 - Type 1 is a combo PHY contains two PHYs, one SS and one HS.
 - Type 2 is a single HS PHY.

These two PHY versons support both Generic xHCI host controller driver
and BDC Broadcom device controller driver.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
drivers/phy/broadcom/Kconfig
drivers/phy/broadcom/Makefile
drivers/phy/broadcom/phy-bcm-sr-usb.c [new file with mode: 0644]

index aa917a61071db97bfbc84de84386a6aa4b196d21..f30f4819c3bb459d7bddc10b3249735fe938c109 100644 (file)
@@ -10,6 +10,17 @@ config PHY_CYGNUS_PCIE
          Enable this to support the Broadcom Cygnus PCIe PHY.
          If unsure, say N.
 
+config PHY_BCM_SR_USB
+       tristate "Broadcom Stingray USB PHY driver"
+       depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
+       select GENERIC_PHY
+       default ARCH_BCM_IPROC
+       help
+         Enable this to support the Broadcom Stingray USB PHY
+         driver. It supports all versions of Superspeed and
+         Highspeed PHYs.
+         If unsure, say N.
+
 config BCM_KONA_USB2_PHY
        tristate "Broadcom Kona USB2 PHY Driver"
        depends on HAS_IOMEM
index 0f60184e6662cdee48e219da866bb709c664d1f7..f453c7d3ffff4bcdc1ecfee89c3e0e8ba245d585 100644 (file)
@@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_BRCM_USB)            += phy-brcm-usb-dvr.o
 phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
 
 obj-$(CONFIG_PHY_BCM_SR_PCIE)          += phy-bcm-sr-pcie.o
+obj-$(CONFIG_PHY_BCM_SR_USB)           += phy-bcm-sr-usb.o
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
new file mode 100644 (file)
index 0000000..fe6c589
--- /dev/null
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Broadcom
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+enum bcm_usb_phy_version {
+       BCM_SR_USB_COMBO_PHY,
+       BCM_SR_USB_HS_PHY,
+};
+
+enum bcm_usb_phy_reg {
+       PLL_NDIV_FRAC,
+       PLL_NDIV_INT,
+       PLL_CTRL,
+       PHY_CTRL,
+       PHY_PLL_CTRL,
+};
+
+/* USB PHY registers */
+
+static const u8 bcm_usb_combo_phy_ss[] = {
+       [PLL_CTRL]              = 0x18,
+       [PHY_CTRL]              = 0x14,
+};
+
+static const u8 bcm_usb_combo_phy_hs[] = {
+       [PLL_NDIV_FRAC] = 0x04,
+       [PLL_NDIV_INT]  = 0x08,
+       [PLL_CTRL]      = 0x0c,
+       [PHY_CTRL]      = 0x10,
+};
+
+#define HSPLL_NDIV_INT_VAL     0x13
+#define HSPLL_NDIV_FRAC_VAL    0x1005
+
+static const u8 bcm_usb_hs_phy[] = {
+       [PLL_NDIV_FRAC] = 0x0,
+       [PLL_NDIV_INT]  = 0x4,
+       [PLL_CTRL]      = 0x8,
+       [PHY_CTRL]      = 0xc,
+};
+
+enum pll_ctrl_bits {
+       PLL_RESETB,
+       SSPLL_SUSPEND_EN,
+       PLL_SEQ_START,
+       PLL_LOCK,
+       PLL_PDIV,
+};
+
+static const u8 u3pll_ctrl[] = {
+       [PLL_RESETB]            = 0,
+       [SSPLL_SUSPEND_EN]      = 1,
+       [PLL_SEQ_START]         = 2,
+       [PLL_LOCK]              = 3,
+};
+
+#define HSPLL_PDIV_MASK                0xF
+#define HSPLL_PDIV_VAL         0x1
+
+static const u8 u2pll_ctrl[] = {
+       [PLL_PDIV]      = 1,
+       [PLL_RESETB]    = 5,
+       [PLL_LOCK]      = 6,
+};
+
+enum bcm_usb_phy_ctrl_bits {
+       CORERDY,
+       AFE_LDO_PWRDWNB,
+       AFE_PLL_PWRDWNB,
+       AFE_BG_PWRDWNB,
+       PHY_ISO,
+       PHY_RESETB,
+       PHY_PCTL,
+};
+
+#define PHY_PCTL_MASK  0xffff
+/*
+ * 0x0806 of PCTL_VAL has below bits set
+ * BIT-8 : refclk divider 1
+ * BIT-3:2: device mode; mode is not effect
+ * BIT-1: soft reset active low
+ */
+#define HSPHY_PCTL_VAL 0x0806
+#define SSPHY_PCTL_VAL 0x0006
+
+static const u8 u3phy_ctrl[] = {
+       [PHY_RESETB]    = 1,
+       [PHY_PCTL]      = 2,
+};
+
+static const u8 u2phy_ctrl[] = {
+       [CORERDY]               = 0,
+       [AFE_LDO_PWRDWNB]       = 1,
+       [AFE_PLL_PWRDWNB]       = 2,
+       [AFE_BG_PWRDWNB]        = 3,
+       [PHY_ISO]               = 4,
+       [PHY_RESETB]            = 5,
+       [PHY_PCTL]              = 6,
+};
+
+struct bcm_usb_phy_cfg {
+       uint32_t type;
+       uint32_t version;
+       void __iomem *regs;
+       struct phy *phy;
+       const u8 *offset;
+};
+
+#define PLL_LOCK_RETRY_COUNT   1000
+
+enum bcm_usb_phy_type {
+       USB_HS_PHY,
+       USB_SS_PHY,
+};
+
+#define NUM_BCM_SR_USB_COMBO_PHYS      2
+
+static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear)
+{
+       writel(readl(addr) & ~clear, addr);
+}
+
+static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set)
+{
+       writel(readl(addr) | set, addr);
+}
+
+static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit)
+{
+       int retry;
+       u32 rd_data;
+
+       retry = PLL_LOCK_RETRY_COUNT;
+       do {
+               rd_data = readl(addr);
+               if (rd_data & bit)
+                       return 0;
+               udelay(1);
+       } while (--retry > 0);
+
+       pr_err("%s: FAIL\n", __func__);
+       return -ETIMEDOUT;
+}
+
+static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
+{
+       int ret = 0;
+       void __iomem *regs = phy_cfg->regs;
+       const u8 *offset;
+       u32 rd_data;
+
+       offset = phy_cfg->offset;
+
+       /* Set pctl with mode and soft reset */
+       rd_data = readl(regs + offset[PHY_CTRL]);
+       rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]);
+       rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]);
+       writel(rd_data, regs + offset[PHY_CTRL]);
+
+       bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL],
+                             BIT(u3pll_ctrl[SSPLL_SUSPEND_EN]));
+       bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
+                             BIT(u3pll_ctrl[PLL_SEQ_START]));
+       bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
+                             BIT(u3pll_ctrl[PLL_RESETB]));
+
+       /* Maximum timeout for PLL reset done */
+       msleep(30);
+
+       ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
+                                    BIT(u3pll_ctrl[PLL_LOCK]));
+
+       return ret;
+}
+
+static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
+{
+       int ret = 0;
+       void __iomem *regs = phy_cfg->regs;
+       const u8 *offset;
+       u32 rd_data;
+
+       offset = phy_cfg->offset;
+
+       writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]);
+       writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]);
+
+       rd_data = readl(regs + offset[PLL_CTRL]);
+       rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]);
+       rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]);
+       writel(rd_data, regs + offset[PLL_CTRL]);
+
+       /* Set Core Ready high */
+       bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
+                             BIT(u2phy_ctrl[CORERDY]));
+
+       /* Maximum timeout for Core Ready done */
+       msleep(30);
+
+       bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
+                             BIT(u2pll_ctrl[PLL_RESETB]));
+       bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
+                             BIT(u2phy_ctrl[PHY_RESETB]));
+
+
+       rd_data = readl(regs + offset[PHY_CTRL]);
+       rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]);
+       rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]);
+       writel(rd_data, regs + offset[PHY_CTRL]);
+
+       /* Maximum timeout for PLL reset done */
+       msleep(30);
+
+       ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
+                                    BIT(u2pll_ctrl[PLL_LOCK]));
+
+       return ret;
+}
+
+static int bcm_usb_phy_reset(struct phy *phy)
+{
+       struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
+       void __iomem *regs = phy_cfg->regs;
+       const u8 *offset;
+
+       offset = phy_cfg->offset;
+
+       if (phy_cfg->type == USB_HS_PHY) {
+               bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL],
+                                     BIT(u2phy_ctrl[CORERDY]));
+               bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
+                                     BIT(u2phy_ctrl[CORERDY]));
+       }
+
+       return 0;
+}
+
+static int bcm_usb_phy_init(struct phy *phy)
+{
+       struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
+       int ret = -EINVAL;
+
+       if (phy_cfg->type == USB_SS_PHY)
+               ret = bcm_usb_ss_phy_init(phy_cfg);
+       else if (phy_cfg->type == USB_HS_PHY)
+               ret = bcm_usb_hs_phy_init(phy_cfg);
+
+       return ret;
+}
+
+static struct phy_ops sr_phy_ops = {
+       .init           = bcm_usb_phy_init,
+       .reset          = bcm_usb_phy_reset,
+       .owner          = THIS_MODULE,
+};
+
+static struct phy *bcm_usb_phy_xlate(struct device *dev,
+                                    struct of_phandle_args *args)
+{
+       struct bcm_usb_phy_cfg *phy_cfg;
+       int phy_idx;
+
+       phy_cfg = dev_get_drvdata(dev);
+       if (!phy_cfg)
+               return ERR_PTR(-EINVAL);
+
+       if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) {
+               phy_idx = args->args[0];
+
+               if (WARN_ON(phy_idx > 1))
+                       return ERR_PTR(-ENODEV);
+
+               return phy_cfg[phy_idx].phy;
+       } else
+               return phy_cfg->phy;
+}
+
+static int bcm_usb_phy_create(struct device *dev, struct device_node *node,
+                             void __iomem *regs, uint32_t version)
+{
+       struct bcm_usb_phy_cfg *phy_cfg;
+       int idx;
+
+       if (version == BCM_SR_USB_COMBO_PHY) {
+               phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS *
+                                      sizeof(struct bcm_usb_phy_cfg),
+                                      GFP_KERNEL);
+               if (!phy_cfg)
+                       return -ENOMEM;
+
+               for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) {
+                       phy_cfg[idx].regs = regs;
+                       phy_cfg[idx].version = version;
+                       if (idx == 0) {
+                               phy_cfg[idx].offset = bcm_usb_combo_phy_hs;
+                               phy_cfg[idx].type = USB_HS_PHY;
+                       } else {
+                               phy_cfg[idx].offset = bcm_usb_combo_phy_ss;
+                               phy_cfg[idx].type = USB_SS_PHY;
+                       }
+                       phy_cfg[idx].phy = devm_phy_create(dev, node,
+                                                          &sr_phy_ops);
+                       if (IS_ERR(phy_cfg[idx].phy))
+                               return PTR_ERR(phy_cfg[idx].phy);
+
+                       phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]);
+               }
+       } else if (version == BCM_SR_USB_HS_PHY) {
+               phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg),
+                                      GFP_KERNEL);
+               if (!phy_cfg)
+                       return -ENOMEM;
+
+               phy_cfg->regs = regs;
+               phy_cfg->version = version;
+               phy_cfg->offset = bcm_usb_hs_phy;
+               phy_cfg->type = USB_HS_PHY;
+               phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops);
+               if (IS_ERR(phy_cfg->phy))
+                       return PTR_ERR(phy_cfg->phy);
+
+               phy_set_drvdata(phy_cfg->phy, phy_cfg);
+       } else
+               return -ENODEV;
+
+       dev_set_drvdata(dev, phy_cfg);
+
+       return 0;
+}
+
+static const struct of_device_id bcm_usb_phy_of_match[] = {
+       {
+               .compatible = "brcm,sr-usb-combo-phy",
+               .data = (void *)BCM_SR_USB_COMBO_PHY,
+       },
+       {
+               .compatible = "brcm,sr-usb-hs-phy",
+               .data = (void *)BCM_SR_USB_HS_PHY,
+       },
+       { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match);
+
+static int bcm_usb_phy_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct device_node *dn = dev->of_node;
+       const struct of_device_id *of_id;
+       struct resource *res;
+       void __iomem *regs;
+       int ret;
+       enum bcm_usb_phy_version version;
+       struct phy_provider *phy_provider;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       regs = devm_ioremap_resource(dev, res);
+       if (IS_ERR(regs))
+               return PTR_ERR(regs);
+
+       of_id = of_match_node(bcm_usb_phy_of_match, dn);
+       if (of_id)
+               version = (enum bcm_usb_phy_version)of_id->data;
+       else
+               return -ENODEV;
+
+       ret = bcm_usb_phy_create(dev, dn, regs, version);
+       if (ret)
+               return ret;
+
+       phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate);
+
+       return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_usb_phy_driver = {
+       .driver = {
+               .name = "phy-bcm-sr-usb",
+               .of_match_table = bcm_usb_phy_of_match,
+       },
+       .probe = bcm_usb_phy_probe,
+};
+module_platform_driver(bcm_usb_phy_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom stingray USB Phy driver");
+MODULE_LICENSE("GPL v2");