Merge drm/drm-next into drm-intel-next-queued
[sfrench/cifs-2.6.git] / mm / memblock.c
1 /*
2  * Procedures for maintaining information about logical memory blocks.
3  *
4  * Peter Bergner, IBM Corp.     June 2001.
5  * Copyright (C) 2001 Peter Bergner.
6  *
7  *      This program is free software; you can redistribute it and/or
8  *      modify it under the terms of the GNU General Public License
9  *      as published by the Free Software Foundation; either version
10  *      2 of the License, or (at your option) any later version.
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/init.h>
16 #include <linux/bitops.h>
17 #include <linux/poison.h>
18 #include <linux/pfn.h>
19 #include <linux/debugfs.h>
20 #include <linux/kmemleak.h>
21 #include <linux/seq_file.h>
22 #include <linux/memblock.h>
23
24 #include <asm/sections.h>
25 #include <linux/io.h>
26
27 #include "internal.h"
28
29 /**
30  * DOC: memblock overview
31  *
32  * Memblock is a method of managing memory regions during the early
33  * boot period when the usual kernel memory allocators are not up and
34  * running.
35  *
36  * Memblock views the system memory as collections of contiguous
37  * regions. There are several types of these collections:
38  *
39  * * ``memory`` - describes the physical memory available to the
40  *   kernel; this may differ from the actual physical memory installed
41  *   in the system, for instance when the memory is restricted with
42  *   ``mem=`` command line parameter
43  * * ``reserved`` - describes the regions that were allocated
44  * * ``physmap`` - describes the actual physical memory regardless of
45  *   the possible restrictions; the ``physmap`` type is only available
46  *   on some architectures.
47  *
48  * Each region is represented by :c:type:`struct memblock_region` that
49  * defines the region extents, its attributes and NUMA node id on NUMA
50  * systems. Every memory type is described by the :c:type:`struct
51  * memblock_type` which contains an array of memory regions along with
52  * the allocator metadata. The memory types are nicely wrapped with
53  * :c:type:`struct memblock`. This structure is statically initialzed
54  * at build time. The region arrays for the "memory" and "reserved"
55  * types are initially sized to %INIT_MEMBLOCK_REGIONS and for the
56  * "physmap" type to %INIT_PHYSMEM_REGIONS.
57  * The :c:func:`memblock_allow_resize` enables automatic resizing of
58  * the region arrays during addition of new regions. This feature
59  * should be used with care so that memory allocated for the region
60  * array will not overlap with areas that should be reserved, for
61  * example initrd.
62  *
63  * The early architecture setup should tell memblock what the physical
64  * memory layout is by using :c:func:`memblock_add` or
65  * :c:func:`memblock_add_node` functions. The first function does not
66  * assign the region to a NUMA node and it is appropriate for UMA
67  * systems. Yet, it is possible to use it on NUMA systems as well and
68  * assign the region to a NUMA node later in the setup process using
69  * :c:func:`memblock_set_node`. The :c:func:`memblock_add_node`
70  * performs such an assignment directly.
71  *
72  * Once memblock is setup the memory can be allocated using either
73  * memblock or bootmem APIs.
74  *
75  * As the system boot progresses, the architecture specific
76  * :c:func:`mem_init` function frees all the memory to the buddy page
77  * allocator.
78  *
79  * If an architecure enables %CONFIG_ARCH_DISCARD_MEMBLOCK, the
80  * memblock data structures will be discarded after the system
81  * initialization compltes.
82  */
83
84 #ifndef CONFIG_NEED_MULTIPLE_NODES
85 struct pglist_data __refdata contig_page_data;
86 EXPORT_SYMBOL(contig_page_data);
87 #endif
88
89 unsigned long max_low_pfn;
90 unsigned long min_low_pfn;
91 unsigned long max_pfn;
92 unsigned long long max_possible_pfn;
93
94 static struct memblock_region memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock;
95 static struct memblock_region memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock;
96 #ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
97 static struct memblock_region memblock_physmem_init_regions[INIT_PHYSMEM_REGIONS] __initdata_memblock;
98 #endif
99
100 struct memblock memblock __initdata_memblock = {
101         .memory.regions         = memblock_memory_init_regions,
102         .memory.cnt             = 1,    /* empty dummy entry */
103         .memory.max             = INIT_MEMBLOCK_REGIONS,
104         .memory.name            = "memory",
105
106         .reserved.regions       = memblock_reserved_init_regions,
107         .reserved.cnt           = 1,    /* empty dummy entry */
108         .reserved.max           = INIT_MEMBLOCK_REGIONS,
109         .reserved.name          = "reserved",
110
111 #ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
112         .physmem.regions        = memblock_physmem_init_regions,
113         .physmem.cnt            = 1,    /* empty dummy entry */
114         .physmem.max            = INIT_PHYSMEM_REGIONS,
115         .physmem.name           = "physmem",
116 #endif
117
118         .bottom_up              = false,
119         .current_limit          = MEMBLOCK_ALLOC_ANYWHERE,
120 };
121
122 int memblock_debug __initdata_memblock;
123 static bool system_has_some_mirror __initdata_memblock = false;
124 static int memblock_can_resize __initdata_memblock;
125 static int memblock_memory_in_slab __initdata_memblock = 0;
126 static int memblock_reserved_in_slab __initdata_memblock = 0;
127
128 enum memblock_flags __init_memblock choose_memblock_flags(void)
129 {
130         return system_has_some_mirror ? MEMBLOCK_MIRROR : MEMBLOCK_NONE;
131 }
132
133 /* adjust *@size so that (@base + *@size) doesn't overflow, return new size */
134 static inline phys_addr_t memblock_cap_size(phys_addr_t base, phys_addr_t *size)
135 {
136         return *size = min(*size, PHYS_ADDR_MAX - base);
137 }
138
139 /*
140  * Address comparison utilities
141  */
142 static unsigned long __init_memblock memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1,
143                                        phys_addr_t base2, phys_addr_t size2)
144 {
145         return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
146 }
147
148 bool __init_memblock memblock_overlaps_region(struct memblock_type *type,
149                                         phys_addr_t base, phys_addr_t size)
150 {
151         unsigned long i;
152
153         for (i = 0; i < type->cnt; i++)
154                 if (memblock_addrs_overlap(base, size, type->regions[i].base,
155                                            type->regions[i].size))
156                         break;
157         return i < type->cnt;
158 }
159
160 /**
161  * __memblock_find_range_bottom_up - find free area utility in bottom-up
162  * @start: start of candidate range
163  * @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
164  *       %MEMBLOCK_ALLOC_ACCESSIBLE
165  * @size: size of free area to find
166  * @align: alignment of free area to find
167  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
168  * @flags: pick from blocks based on memory attributes
169  *
170  * Utility called from memblock_find_in_range_node(), find free area bottom-up.
171  *
172  * Return:
173  * Found address on success, 0 on failure.
174  */
175 static phys_addr_t __init_memblock
176 __memblock_find_range_bottom_up(phys_addr_t start, phys_addr_t end,
177                                 phys_addr_t size, phys_addr_t align, int nid,
178                                 enum memblock_flags flags)
179 {
180         phys_addr_t this_start, this_end, cand;
181         u64 i;
182
183         for_each_free_mem_range(i, nid, flags, &this_start, &this_end, NULL) {
184                 this_start = clamp(this_start, start, end);
185                 this_end = clamp(this_end, start, end);
186
187                 cand = round_up(this_start, align);
188                 if (cand < this_end && this_end - cand >= size)
189                         return cand;
190         }
191
192         return 0;
193 }
194
195 /**
196  * __memblock_find_range_top_down - find free area utility, in top-down
197  * @start: start of candidate range
198  * @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
199  *       %MEMBLOCK_ALLOC_ACCESSIBLE
200  * @size: size of free area to find
201  * @align: alignment of free area to find
202  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
203  * @flags: pick from blocks based on memory attributes
204  *
205  * Utility called from memblock_find_in_range_node(), find free area top-down.
206  *
207  * Return:
208  * Found address on success, 0 on failure.
209  */
210 static phys_addr_t __init_memblock
211 __memblock_find_range_top_down(phys_addr_t start, phys_addr_t end,
212                                phys_addr_t size, phys_addr_t align, int nid,
213                                enum memblock_flags flags)
214 {
215         phys_addr_t this_start, this_end, cand;
216         u64 i;
217
218         for_each_free_mem_range_reverse(i, nid, flags, &this_start, &this_end,
219                                         NULL) {
220                 this_start = clamp(this_start, start, end);
221                 this_end = clamp(this_end, start, end);
222
223                 if (this_end < size)
224                         continue;
225
226                 cand = round_down(this_end - size, align);
227                 if (cand >= this_start)
228                         return cand;
229         }
230
231         return 0;
232 }
233
234 /**
235  * memblock_find_in_range_node - find free area in given range and node
236  * @size: size of free area to find
237  * @align: alignment of free area to find
238  * @start: start of candidate range
239  * @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
240  *       %MEMBLOCK_ALLOC_ACCESSIBLE
241  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
242  * @flags: pick from blocks based on memory attributes
243  *
244  * Find @size free area aligned to @align in the specified range and node.
245  *
246  * When allocation direction is bottom-up, the @start should be greater
247  * than the end of the kernel image. Otherwise, it will be trimmed. The
248  * reason is that we want the bottom-up allocation just near the kernel
249  * image so it is highly likely that the allocated memory and the kernel
250  * will reside in the same node.
251  *
252  * If bottom-up allocation failed, will try to allocate memory top-down.
253  *
254  * Return:
255  * Found address on success, 0 on failure.
256  */
257 phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,
258                                         phys_addr_t align, phys_addr_t start,
259                                         phys_addr_t end, int nid,
260                                         enum memblock_flags flags)
261 {
262         phys_addr_t kernel_end, ret;
263
264         /* pump up @end */
265         if (end == MEMBLOCK_ALLOC_ACCESSIBLE ||
266             end == MEMBLOCK_ALLOC_KASAN)
267                 end = memblock.current_limit;
268
269         /* avoid allocating the first page */
270         start = max_t(phys_addr_t, start, PAGE_SIZE);
271         end = max(start, end);
272         kernel_end = __pa_symbol(_end);
273
274         /*
275          * try bottom-up allocation only when bottom-up mode
276          * is set and @end is above the kernel image.
277          */
278         if (memblock_bottom_up() && end > kernel_end) {
279                 phys_addr_t bottom_up_start;
280
281                 /* make sure we will allocate above the kernel */
282                 bottom_up_start = max(start, kernel_end);
283
284                 /* ok, try bottom-up allocation first */
285                 ret = __memblock_find_range_bottom_up(bottom_up_start, end,
286                                                       size, align, nid, flags);
287                 if (ret)
288                         return ret;
289
290                 /*
291                  * we always limit bottom-up allocation above the kernel,
292                  * but top-down allocation doesn't have the limit, so
293                  * retrying top-down allocation may succeed when bottom-up
294                  * allocation failed.
295                  *
296                  * bottom-up allocation is expected to be fail very rarely,
297                  * so we use WARN_ONCE() here to see the stack trace if
298                  * fail happens.
299                  */
300                 WARN_ONCE(IS_ENABLED(CONFIG_MEMORY_HOTREMOVE),
301                           "memblock: bottom-up allocation failed, memory hotremove may be affected\n");
302         }
303
304         return __memblock_find_range_top_down(start, end, size, align, nid,
305                                               flags);
306 }
307
308 /**
309  * memblock_find_in_range - find free area in given range
310  * @start: start of candidate range
311  * @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
312  *       %MEMBLOCK_ALLOC_ACCESSIBLE
313  * @size: size of free area to find
314  * @align: alignment of free area to find
315  *
316  * Find @size free area aligned to @align in the specified range.
317  *
318  * Return:
319  * Found address on success, 0 on failure.
320  */
321 phys_addr_t __init_memblock memblock_find_in_range(phys_addr_t start,
322                                         phys_addr_t end, phys_addr_t size,
323                                         phys_addr_t align)
324 {
325         phys_addr_t ret;
326         enum memblock_flags flags = choose_memblock_flags();
327
328 again:
329         ret = memblock_find_in_range_node(size, align, start, end,
330                                             NUMA_NO_NODE, flags);
331
332         if (!ret && (flags & MEMBLOCK_MIRROR)) {
333                 pr_warn("Could not allocate %pap bytes of mirrored memory\n",
334                         &size);
335                 flags &= ~MEMBLOCK_MIRROR;
336                 goto again;
337         }
338
339         return ret;
340 }
341
342 static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
343 {
344         type->total_size -= type->regions[r].size;
345         memmove(&type->regions[r], &type->regions[r + 1],
346                 (type->cnt - (r + 1)) * sizeof(type->regions[r]));
347         type->cnt--;
348
349         /* Special case for empty arrays */
350         if (type->cnt == 0) {
351                 WARN_ON(type->total_size != 0);
352                 type->cnt = 1;
353                 type->regions[0].base = 0;
354                 type->regions[0].size = 0;
355                 type->regions[0].flags = 0;
356                 memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
357         }
358 }
359
360 #ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
361 /**
362  * memblock_discard - discard memory and reserved arrays if they were allocated
363  */
364 void __init memblock_discard(void)
365 {
366         phys_addr_t addr, size;
367
368         if (memblock.reserved.regions != memblock_reserved_init_regions) {
369                 addr = __pa(memblock.reserved.regions);
370                 size = PAGE_ALIGN(sizeof(struct memblock_region) *
371                                   memblock.reserved.max);
372                 __memblock_free_late(addr, size);
373         }
374
375         if (memblock.memory.regions != memblock_memory_init_regions) {
376                 addr = __pa(memblock.memory.regions);
377                 size = PAGE_ALIGN(sizeof(struct memblock_region) *
378                                   memblock.memory.max);
379                 __memblock_free_late(addr, size);
380         }
381 }
382 #endif
383
384 /**
385  * memblock_double_array - double the size of the memblock regions array
386  * @type: memblock type of the regions array being doubled
387  * @new_area_start: starting address of memory range to avoid overlap with
388  * @new_area_size: size of memory range to avoid overlap with
389  *
390  * Double the size of the @type regions array. If memblock is being used to
391  * allocate memory for a new reserved regions array and there is a previously
392  * allocated memory range [@new_area_start, @new_area_start + @new_area_size]
393  * waiting to be reserved, ensure the memory used by the new array does
394  * not overlap.
395  *
396  * Return:
397  * 0 on success, -1 on failure.
398  */
399 static int __init_memblock memblock_double_array(struct memblock_type *type,
400                                                 phys_addr_t new_area_start,
401                                                 phys_addr_t new_area_size)
402 {
403         struct memblock_region *new_array, *old_array;
404         phys_addr_t old_alloc_size, new_alloc_size;
405         phys_addr_t old_size, new_size, addr, new_end;
406         int use_slab = slab_is_available();
407         int *in_slab;
408
409         /* We don't allow resizing until we know about the reserved regions
410          * of memory that aren't suitable for allocation
411          */
412         if (!memblock_can_resize)
413                 return -1;
414
415         /* Calculate new doubled size */
416         old_size = type->max * sizeof(struct memblock_region);
417         new_size = old_size << 1;
418         /*
419          * We need to allocated new one align to PAGE_SIZE,
420          *   so we can free them completely later.
421          */
422         old_alloc_size = PAGE_ALIGN(old_size);
423         new_alloc_size = PAGE_ALIGN(new_size);
424
425         /* Retrieve the slab flag */
426         if (type == &memblock.memory)
427                 in_slab = &memblock_memory_in_slab;
428         else
429                 in_slab = &memblock_reserved_in_slab;
430
431         /* Try to find some space for it.
432          *
433          * WARNING: We assume that either slab_is_available() and we use it or
434          * we use MEMBLOCK for allocations. That means that this is unsafe to
435          * use when bootmem is currently active (unless bootmem itself is
436          * implemented on top of MEMBLOCK which isn't the case yet)
437          *
438          * This should however not be an issue for now, as we currently only
439          * call into MEMBLOCK while it's still active, or much later when slab
440          * is active for memory hotplug operations
441          */
442         if (use_slab) {
443                 new_array = kmalloc(new_size, GFP_KERNEL);
444                 addr = new_array ? __pa(new_array) : 0;
445         } else {
446                 /* only exclude range when trying to double reserved.regions */
447                 if (type != &memblock.reserved)
448                         new_area_start = new_area_size = 0;
449
450                 addr = memblock_find_in_range(new_area_start + new_area_size,
451                                                 memblock.current_limit,
452                                                 new_alloc_size, PAGE_SIZE);
453                 if (!addr && new_area_size)
454                         addr = memblock_find_in_range(0,
455                                 min(new_area_start, memblock.current_limit),
456                                 new_alloc_size, PAGE_SIZE);
457
458                 new_array = addr ? __va(addr) : NULL;
459         }
460         if (!addr) {
461                 pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
462                        type->name, type->max, type->max * 2);
463                 return -1;
464         }
465
466         new_end = addr + new_size - 1;
467         memblock_dbg("memblock: %s is doubled to %ld at [%pa-%pa]",
468                         type->name, type->max * 2, &addr, &new_end);
469
470         /*
471          * Found space, we now need to move the array over before we add the
472          * reserved region since it may be our reserved array itself that is
473          * full.
474          */
475         memcpy(new_array, type->regions, old_size);
476         memset(new_array + type->max, 0, old_size);
477         old_array = type->regions;
478         type->regions = new_array;
479         type->max <<= 1;
480
481         /* Free old array. We needn't free it if the array is the static one */
482         if (*in_slab)
483                 kfree(old_array);
484         else if (old_array != memblock_memory_init_regions &&
485                  old_array != memblock_reserved_init_regions)
486                 memblock_free(__pa(old_array), old_alloc_size);
487
488         /*
489          * Reserve the new array if that comes from the memblock.  Otherwise, we
490          * needn't do it
491          */
492         if (!use_slab)
493                 BUG_ON(memblock_reserve(addr, new_alloc_size));
494
495         /* Update slab flag */
496         *in_slab = use_slab;
497
498         return 0;
499 }
500
501 /**
502  * memblock_merge_regions - merge neighboring compatible regions
503  * @type: memblock type to scan
504  *
505  * Scan @type and merge neighboring compatible regions.
506  */
507 static void __init_memblock memblock_merge_regions(struct memblock_type *type)
508 {
509         int i = 0;
510
511         /* cnt never goes below 1 */
512         while (i < type->cnt - 1) {
513                 struct memblock_region *this = &type->regions[i];
514                 struct memblock_region *next = &type->regions[i + 1];
515
516                 if (this->base + this->size != next->base ||
517                     memblock_get_region_node(this) !=
518                     memblock_get_region_node(next) ||
519                     this->flags != next->flags) {
520                         BUG_ON(this->base + this->size > next->base);
521                         i++;
522                         continue;
523                 }
524
525                 this->size += next->size;
526                 /* move forward from next + 1, index of which is i + 2 */
527                 memmove(next, next + 1, (type->cnt - (i + 2)) * sizeof(*next));
528                 type->cnt--;
529         }
530 }
531
532 /**
533  * memblock_insert_region - insert new memblock region
534  * @type:       memblock type to insert into
535  * @idx:        index for the insertion point
536  * @base:       base address of the new region
537  * @size:       size of the new region
538  * @nid:        node id of the new region
539  * @flags:      flags of the new region
540  *
541  * Insert new memblock region [@base, @base + @size) into @type at @idx.
542  * @type must already have extra room to accommodate the new region.
543  */
544 static void __init_memblock memblock_insert_region(struct memblock_type *type,
545                                                    int idx, phys_addr_t base,
546                                                    phys_addr_t size,
547                                                    int nid,
548                                                    enum memblock_flags flags)
549 {
550         struct memblock_region *rgn = &type->regions[idx];
551
552         BUG_ON(type->cnt >= type->max);
553         memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
554         rgn->base = base;
555         rgn->size = size;
556         rgn->flags = flags;
557         memblock_set_region_node(rgn, nid);
558         type->cnt++;
559         type->total_size += size;
560 }
561
562 /**
563  * memblock_add_range - add new memblock region
564  * @type: memblock type to add new region into
565  * @base: base address of the new region
566  * @size: size of the new region
567  * @nid: nid of the new region
568  * @flags: flags of the new region
569  *
570  * Add new memblock region [@base, @base + @size) into @type.  The new region
571  * is allowed to overlap with existing ones - overlaps don't affect already
572  * existing regions.  @type is guaranteed to be minimal (all neighbouring
573  * compatible regions are merged) after the addition.
574  *
575  * Return:
576  * 0 on success, -errno on failure.
577  */
578 int __init_memblock memblock_add_range(struct memblock_type *type,
579                                 phys_addr_t base, phys_addr_t size,
580                                 int nid, enum memblock_flags flags)
581 {
582         bool insert = false;
583         phys_addr_t obase = base;
584         phys_addr_t end = base + memblock_cap_size(base, &size);
585         int idx, nr_new;
586         struct memblock_region *rgn;
587
588         if (!size)
589                 return 0;
590
591         /* special case for empty array */
592         if (type->regions[0].size == 0) {
593                 WARN_ON(type->cnt != 1 || type->total_size);
594                 type->regions[0].base = base;
595                 type->regions[0].size = size;
596                 type->regions[0].flags = flags;
597                 memblock_set_region_node(&type->regions[0], nid);
598                 type->total_size = size;
599                 return 0;
600         }
601 repeat:
602         /*
603          * The following is executed twice.  Once with %false @insert and
604          * then with %true.  The first counts the number of regions needed
605          * to accommodate the new area.  The second actually inserts them.
606          */
607         base = obase;
608         nr_new = 0;
609
610         for_each_memblock_type(idx, type, rgn) {
611                 phys_addr_t rbase = rgn->base;
612                 phys_addr_t rend = rbase + rgn->size;
613
614                 if (rbase >= end)
615                         break;
616                 if (rend <= base)
617                         continue;
618                 /*
619                  * @rgn overlaps.  If it separates the lower part of new
620                  * area, insert that portion.
621                  */
622                 if (rbase > base) {
623 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
624                         WARN_ON(nid != memblock_get_region_node(rgn));
625 #endif
626                         WARN_ON(flags != rgn->flags);
627                         nr_new++;
628                         if (insert)
629                                 memblock_insert_region(type, idx++, base,
630                                                        rbase - base, nid,
631                                                        flags);
632                 }
633                 /* area below @rend is dealt with, forget about it */
634                 base = min(rend, end);
635         }
636
637         /* insert the remaining portion */
638         if (base < end) {
639                 nr_new++;
640                 if (insert)
641                         memblock_insert_region(type, idx, base, end - base,
642                                                nid, flags);
643         }
644
645         if (!nr_new)
646                 return 0;
647
648         /*
649          * If this was the first round, resize array and repeat for actual
650          * insertions; otherwise, merge and return.
651          */
652         if (!insert) {
653                 while (type->cnt + nr_new > type->max)
654                         if (memblock_double_array(type, obase, size) < 0)
655                                 return -ENOMEM;
656                 insert = true;
657                 goto repeat;
658         } else {
659                 memblock_merge_regions(type);
660                 return 0;
661         }
662 }
663
664 /**
665  * memblock_add_node - add new memblock region within a NUMA node
666  * @base: base address of the new region
667  * @size: size of the new region
668  * @nid: nid of the new region
669  *
670  * Add new memblock region [@base, @base + @size) to the "memory"
671  * type. See memblock_add_range() description for mode details
672  *
673  * Return:
674  * 0 on success, -errno on failure.
675  */
676 int __init_memblock memblock_add_node(phys_addr_t base, phys_addr_t size,
677                                        int nid)
678 {
679         return memblock_add_range(&memblock.memory, base, size, nid, 0);
680 }
681
682 /**
683  * memblock_add - add new memblock region
684  * @base: base address of the new region
685  * @size: size of the new region
686  *
687  * Add new memblock region [@base, @base + @size) to the "memory"
688  * type. See memblock_add_range() description for mode details
689  *
690  * Return:
691  * 0 on success, -errno on failure.
692  */
693 int __init_memblock memblock_add(phys_addr_t base, phys_addr_t size)
694 {
695         phys_addr_t end = base + size - 1;
696
697         memblock_dbg("memblock_add: [%pa-%pa] %pF\n",
698                      &base, &end, (void *)_RET_IP_);
699
700         return memblock_add_range(&memblock.memory, base, size, MAX_NUMNODES, 0);
701 }
702
703 /**
704  * memblock_isolate_range - isolate given range into disjoint memblocks
705  * @type: memblock type to isolate range for
706  * @base: base of range to isolate
707  * @size: size of range to isolate
708  * @start_rgn: out parameter for the start of isolated region
709  * @end_rgn: out parameter for the end of isolated region
710  *
711  * Walk @type and ensure that regions don't cross the boundaries defined by
712  * [@base, @base + @size).  Crossing regions are split at the boundaries,
713  * which may create at most two more regions.  The index of the first
714  * region inside the range is returned in *@start_rgn and end in *@end_rgn.
715  *
716  * Return:
717  * 0 on success, -errno on failure.
718  */
719 static int __init_memblock memblock_isolate_range(struct memblock_type *type,
720                                         phys_addr_t base, phys_addr_t size,
721                                         int *start_rgn, int *end_rgn)
722 {
723         phys_addr_t end = base + memblock_cap_size(base, &size);
724         int idx;
725         struct memblock_region *rgn;
726
727         *start_rgn = *end_rgn = 0;
728
729         if (!size)
730                 return 0;
731
732         /* we'll create at most two more regions */
733         while (type->cnt + 2 > type->max)
734                 if (memblock_double_array(type, base, size) < 0)
735                         return -ENOMEM;
736
737         for_each_memblock_type(idx, type, rgn) {
738                 phys_addr_t rbase = rgn->base;
739                 phys_addr_t rend = rbase + rgn->size;
740
741                 if (rbase >= end)
742                         break;
743                 if (rend <= base)
744                         continue;
745
746                 if (rbase < base) {
747                         /*
748                          * @rgn intersects from below.  Split and continue
749                          * to process the next region - the new top half.
750                          */
751                         rgn->base = base;
752                         rgn->size -= base - rbase;
753                         type->total_size -= base - rbase;
754                         memblock_insert_region(type, idx, rbase, base - rbase,
755                                                memblock_get_region_node(rgn),
756                                                rgn->flags);
757                 } else if (rend > end) {
758                         /*
759                          * @rgn intersects from above.  Split and redo the
760                          * current region - the new bottom half.
761                          */
762                         rgn->base = end;
763                         rgn->size -= end - rbase;
764                         type->total_size -= end - rbase;
765                         memblock_insert_region(type, idx--, rbase, end - rbase,
766                                                memblock_get_region_node(rgn),
767                                                rgn->flags);
768                 } else {
769                         /* @rgn is fully contained, record it */
770                         if (!*end_rgn)
771                                 *start_rgn = idx;
772                         *end_rgn = idx + 1;
773                 }
774         }
775
776         return 0;
777 }
778
779 static int __init_memblock memblock_remove_range(struct memblock_type *type,
780                                           phys_addr_t base, phys_addr_t size)
781 {
782         int start_rgn, end_rgn;
783         int i, ret;
784
785         ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
786         if (ret)
787                 return ret;
788
789         for (i = end_rgn - 1; i >= start_rgn; i--)
790                 memblock_remove_region(type, i);
791         return 0;
792 }
793
794 int __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size)
795 {
796         phys_addr_t end = base + size - 1;
797
798         memblock_dbg("memblock_remove: [%pa-%pa] %pS\n",
799                      &base, &end, (void *)_RET_IP_);
800
801         return memblock_remove_range(&memblock.memory, base, size);
802 }
803
804 /**
805  * memblock_free - free boot memory block
806  * @base: phys starting address of the  boot memory block
807  * @size: size of the boot memory block in bytes
808  *
809  * Free boot memory block previously allocated by memblock_alloc_xx() API.
810  * The freeing memory will not be released to the buddy allocator.
811  */
812 int __init_memblock memblock_free(phys_addr_t base, phys_addr_t size)
813 {
814         phys_addr_t end = base + size - 1;
815
816         memblock_dbg("   memblock_free: [%pa-%pa] %pF\n",
817                      &base, &end, (void *)_RET_IP_);
818
819         kmemleak_free_part_phys(base, size);
820         return memblock_remove_range(&memblock.reserved, base, size);
821 }
822
823 int __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
824 {
825         phys_addr_t end = base + size - 1;
826
827         memblock_dbg("memblock_reserve: [%pa-%pa] %pF\n",
828                      &base, &end, (void *)_RET_IP_);
829
830         return memblock_add_range(&memblock.reserved, base, size, MAX_NUMNODES, 0);
831 }
832
833 /**
834  * memblock_setclr_flag - set or clear flag for a memory region
835  * @base: base address of the region
836  * @size: size of the region
837  * @set: set or clear the flag
838  * @flag: the flag to udpate
839  *
840  * This function isolates region [@base, @base + @size), and sets/clears flag
841  *
842  * Return: 0 on success, -errno on failure.
843  */
844 static int __init_memblock memblock_setclr_flag(phys_addr_t base,
845                                 phys_addr_t size, int set, int flag)
846 {
847         struct memblock_type *type = &memblock.memory;
848         int i, ret, start_rgn, end_rgn;
849
850         ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
851         if (ret)
852                 return ret;
853
854         for (i = start_rgn; i < end_rgn; i++)
855                 if (set)
856                         memblock_set_region_flags(&type->regions[i], flag);
857                 else
858                         memblock_clear_region_flags(&type->regions[i], flag);
859
860         memblock_merge_regions(type);
861         return 0;
862 }
863
864 /**
865  * memblock_mark_hotplug - Mark hotpluggable memory with flag MEMBLOCK_HOTPLUG.
866  * @base: the base phys addr of the region
867  * @size: the size of the region
868  *
869  * Return: 0 on success, -errno on failure.
870  */
871 int __init_memblock memblock_mark_hotplug(phys_addr_t base, phys_addr_t size)
872 {
873         return memblock_setclr_flag(base, size, 1, MEMBLOCK_HOTPLUG);
874 }
875
876 /**
877  * memblock_clear_hotplug - Clear flag MEMBLOCK_HOTPLUG for a specified region.
878  * @base: the base phys addr of the region
879  * @size: the size of the region
880  *
881  * Return: 0 on success, -errno on failure.
882  */
883 int __init_memblock memblock_clear_hotplug(phys_addr_t base, phys_addr_t size)
884 {
885         return memblock_setclr_flag(base, size, 0, MEMBLOCK_HOTPLUG);
886 }
887
888 /**
889  * memblock_mark_mirror - Mark mirrored memory with flag MEMBLOCK_MIRROR.
890  * @base: the base phys addr of the region
891  * @size: the size of the region
892  *
893  * Return: 0 on success, -errno on failure.
894  */
895 int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size)
896 {
897         system_has_some_mirror = true;
898
899         return memblock_setclr_flag(base, size, 1, MEMBLOCK_MIRROR);
900 }
901
902 /**
903  * memblock_mark_nomap - Mark a memory region with flag MEMBLOCK_NOMAP.
904  * @base: the base phys addr of the region
905  * @size: the size of the region
906  *
907  * Return: 0 on success, -errno on failure.
908  */
909 int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size)
910 {
911         return memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP);
912 }
913
914 /**
915  * memblock_clear_nomap - Clear flag MEMBLOCK_NOMAP for a specified region.
916  * @base: the base phys addr of the region
917  * @size: the size of the region
918  *
919  * Return: 0 on success, -errno on failure.
920  */
921 int __init_memblock memblock_clear_nomap(phys_addr_t base, phys_addr_t size)
922 {
923         return memblock_setclr_flag(base, size, 0, MEMBLOCK_NOMAP);
924 }
925
926 /**
927  * __next_reserved_mem_region - next function for for_each_reserved_region()
928  * @idx: pointer to u64 loop variable
929  * @out_start: ptr to phys_addr_t for start address of the region, can be %NULL
930  * @out_end: ptr to phys_addr_t for end address of the region, can be %NULL
931  *
932  * Iterate over all reserved memory regions.
933  */
934 void __init_memblock __next_reserved_mem_region(u64 *idx,
935                                            phys_addr_t *out_start,
936                                            phys_addr_t *out_end)
937 {
938         struct memblock_type *type = &memblock.reserved;
939
940         if (*idx < type->cnt) {
941                 struct memblock_region *r = &type->regions[*idx];
942                 phys_addr_t base = r->base;
943                 phys_addr_t size = r->size;
944
945                 if (out_start)
946                         *out_start = base;
947                 if (out_end)
948                         *out_end = base + size - 1;
949
950                 *idx += 1;
951                 return;
952         }
953
954         /* signal end of iteration */
955         *idx = ULLONG_MAX;
956 }
957
958 /**
959  * __next__mem_range - next function for for_each_free_mem_range() etc.
960  * @idx: pointer to u64 loop variable
961  * @nid: node selector, %NUMA_NO_NODE for all nodes
962  * @flags: pick from blocks based on memory attributes
963  * @type_a: pointer to memblock_type from where the range is taken
964  * @type_b: pointer to memblock_type which excludes memory from being taken
965  * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
966  * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
967  * @out_nid: ptr to int for nid of the range, can be %NULL
968  *
969  * Find the first area from *@idx which matches @nid, fill the out
970  * parameters, and update *@idx for the next iteration.  The lower 32bit of
971  * *@idx contains index into type_a and the upper 32bit indexes the
972  * areas before each region in type_b.  For example, if type_b regions
973  * look like the following,
974  *
975  *      0:[0-16), 1:[32-48), 2:[128-130)
976  *
977  * The upper 32bit indexes the following regions.
978  *
979  *      0:[0-0), 1:[16-32), 2:[48-128), 3:[130-MAX)
980  *
981  * As both region arrays are sorted, the function advances the two indices
982  * in lockstep and returns each intersection.
983  */
984 void __init_memblock __next_mem_range(u64 *idx, int nid,
985                                       enum memblock_flags flags,
986                                       struct memblock_type *type_a,
987                                       struct memblock_type *type_b,
988                                       phys_addr_t *out_start,
989                                       phys_addr_t *out_end, int *out_nid)
990 {
991         int idx_a = *idx & 0xffffffff;
992         int idx_b = *idx >> 32;
993
994         if (WARN_ONCE(nid == MAX_NUMNODES,
995         "Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n"))
996                 nid = NUMA_NO_NODE;
997
998         for (; idx_a < type_a->cnt; idx_a++) {
999                 struct memblock_region *m = &type_a->regions[idx_a];
1000
1001                 phys_addr_t m_start = m->base;
1002                 phys_addr_t m_end = m->base + m->size;
1003                 int         m_nid = memblock_get_region_node(m);
1004
1005                 /* only memory regions are associated with nodes, check it */
1006                 if (nid != NUMA_NO_NODE && nid != m_nid)
1007                         continue;
1008
1009                 /* skip hotpluggable memory regions if needed */
1010                 if (movable_node_is_enabled() && memblock_is_hotpluggable(m))
1011                         continue;
1012
1013                 /* if we want mirror memory skip non-mirror memory regions */
1014                 if ((flags & MEMBLOCK_MIRROR) && !memblock_is_mirror(m))
1015                         continue;
1016
1017                 /* skip nomap memory unless we were asked for it explicitly */
1018                 if (!(flags & MEMBLOCK_NOMAP) && memblock_is_nomap(m))
1019                         continue;
1020
1021                 if (!type_b) {
1022                         if (out_start)
1023                                 *out_start = m_start;
1024                         if (out_end)
1025                                 *out_end = m_end;
1026                         if (out_nid)
1027                                 *out_nid = m_nid;
1028                         idx_a++;
1029                         *idx = (u32)idx_a | (u64)idx_b << 32;
1030                         return;
1031                 }
1032
1033                 /* scan areas before each reservation */
1034                 for (; idx_b < type_b->cnt + 1; idx_b++) {
1035                         struct memblock_region *r;
1036                         phys_addr_t r_start;
1037                         phys_addr_t r_end;
1038
1039                         r = &type_b->regions[idx_b];
1040                         r_start = idx_b ? r[-1].base + r[-1].size : 0;
1041                         r_end = idx_b < type_b->cnt ?
1042                                 r->base : PHYS_ADDR_MAX;
1043
1044                         /*
1045                          * if idx_b advanced past idx_a,
1046                          * break out to advance idx_a
1047                          */
1048                         if (r_start >= m_end)
1049                                 break;
1050                         /* if the two regions intersect, we're done */
1051                         if (m_start < r_end) {
1052                                 if (out_start)
1053                                         *out_start =
1054                                                 max(m_start, r_start);
1055                                 if (out_end)
1056                                         *out_end = min(m_end, r_end);
1057                                 if (out_nid)
1058                                         *out_nid = m_nid;
1059                                 /*
1060                                  * The region which ends first is
1061                                  * advanced for the next iteration.
1062                                  */
1063                                 if (m_end <= r_end)
1064                                         idx_a++;
1065                                 else
1066                                         idx_b++;
1067                                 *idx = (u32)idx_a | (u64)idx_b << 32;
1068                                 return;
1069                         }
1070                 }
1071         }
1072
1073         /* signal end of iteration */
1074         *idx = ULLONG_MAX;
1075 }
1076
1077 /**
1078  * __next_mem_range_rev - generic next function for for_each_*_range_rev()
1079  *
1080  * @idx: pointer to u64 loop variable
1081  * @nid: node selector, %NUMA_NO_NODE for all nodes
1082  * @flags: pick from blocks based on memory attributes
1083  * @type_a: pointer to memblock_type from where the range is taken
1084  * @type_b: pointer to memblock_type which excludes memory from being taken
1085  * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
1086  * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
1087  * @out_nid: ptr to int for nid of the range, can be %NULL
1088  *
1089  * Finds the next range from type_a which is not marked as unsuitable
1090  * in type_b.
1091  *
1092  * Reverse of __next_mem_range().
1093  */
1094 void __init_memblock __next_mem_range_rev(u64 *idx, int nid,
1095                                           enum memblock_flags flags,
1096                                           struct memblock_type *type_a,
1097                                           struct memblock_type *type_b,
1098                                           phys_addr_t *out_start,
1099                                           phys_addr_t *out_end, int *out_nid)
1100 {
1101         int idx_a = *idx & 0xffffffff;
1102         int idx_b = *idx >> 32;
1103
1104         if (WARN_ONCE(nid == MAX_NUMNODES, "Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n"))
1105                 nid = NUMA_NO_NODE;
1106
1107         if (*idx == (u64)ULLONG_MAX) {
1108                 idx_a = type_a->cnt - 1;
1109                 if (type_b != NULL)
1110                         idx_b = type_b->cnt;
1111                 else
1112                         idx_b = 0;
1113         }
1114
1115         for (; idx_a >= 0; idx_a--) {
1116                 struct memblock_region *m = &type_a->regions[idx_a];
1117
1118                 phys_addr_t m_start = m->base;
1119                 phys_addr_t m_end = m->base + m->size;
1120                 int m_nid = memblock_get_region_node(m);
1121
1122                 /* only memory regions are associated with nodes, check it */
1123                 if (nid != NUMA_NO_NODE && nid != m_nid)
1124                         continue;
1125
1126                 /* skip hotpluggable memory regions if needed */
1127                 if (movable_node_is_enabled() && memblock_is_hotpluggable(m))
1128                         continue;
1129
1130                 /* if we want mirror memory skip non-mirror memory regions */
1131                 if ((flags & MEMBLOCK_MIRROR) && !memblock_is_mirror(m))
1132                         continue;
1133
1134                 /* skip nomap memory unless we were asked for it explicitly */
1135                 if (!(flags & MEMBLOCK_NOMAP) && memblock_is_nomap(m))
1136                         continue;
1137
1138                 if (!type_b) {
1139                         if (out_start)
1140                                 *out_start = m_start;
1141                         if (out_end)
1142                                 *out_end = m_end;
1143                         if (out_nid)
1144                                 *out_nid = m_nid;
1145                         idx_a--;
1146                         *idx = (u32)idx_a | (u64)idx_b << 32;
1147                         return;
1148                 }
1149
1150                 /* scan areas before each reservation */
1151                 for (; idx_b >= 0; idx_b--) {
1152                         struct memblock_region *r;
1153                         phys_addr_t r_start;
1154                         phys_addr_t r_end;
1155
1156                         r = &type_b->regions[idx_b];
1157                         r_start = idx_b ? r[-1].base + r[-1].size : 0;
1158                         r_end = idx_b < type_b->cnt ?
1159                                 r->base : PHYS_ADDR_MAX;
1160                         /*
1161                          * if idx_b advanced past idx_a,
1162                          * break out to advance idx_a
1163                          */
1164
1165                         if (r_end <= m_start)
1166                                 break;
1167                         /* if the two regions intersect, we're done */
1168                         if (m_end > r_start) {
1169                                 if (out_start)
1170                                         *out_start = max(m_start, r_start);
1171                                 if (out_end)
1172                                         *out_end = min(m_end, r_end);
1173                                 if (out_nid)
1174                                         *out_nid = m_nid;
1175                                 if (m_start >= r_start)
1176                                         idx_a--;
1177                                 else
1178                                         idx_b--;
1179                                 *idx = (u32)idx_a | (u64)idx_b << 32;
1180                                 return;
1181                         }
1182                 }
1183         }
1184         /* signal end of iteration */
1185         *idx = ULLONG_MAX;
1186 }
1187
1188 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
1189 /*
1190  * Common iterator interface used to define for_each_mem_pfn_range().
1191  */
1192 void __init_memblock __next_mem_pfn_range(int *idx, int nid,
1193                                 unsigned long *out_start_pfn,
1194                                 unsigned long *out_end_pfn, int *out_nid)
1195 {
1196         struct memblock_type *type = &memblock.memory;
1197         struct memblock_region *r;
1198
1199         while (++*idx < type->cnt) {
1200                 r = &type->regions[*idx];
1201
1202                 if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size))
1203                         continue;
1204                 if (nid == MAX_NUMNODES || nid == r->nid)
1205                         break;
1206         }
1207         if (*idx >= type->cnt) {
1208                 *idx = -1;
1209                 return;
1210         }
1211
1212         if (out_start_pfn)
1213                 *out_start_pfn = PFN_UP(r->base);
1214         if (out_end_pfn)
1215                 *out_end_pfn = PFN_DOWN(r->base + r->size);
1216         if (out_nid)
1217                 *out_nid = r->nid;
1218 }
1219
1220 /**
1221  * memblock_set_node - set node ID on memblock regions
1222  * @base: base of area to set node ID for
1223  * @size: size of area to set node ID for
1224  * @type: memblock type to set node ID for
1225  * @nid: node ID to set
1226  *
1227  * Set the nid of memblock @type regions in [@base, @base + @size) to @nid.
1228  * Regions which cross the area boundaries are split as necessary.
1229  *
1230  * Return:
1231  * 0 on success, -errno on failure.
1232  */
1233 int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size,
1234                                       struct memblock_type *type, int nid)
1235 {
1236         int start_rgn, end_rgn;
1237         int i, ret;
1238
1239         ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
1240         if (ret)
1241                 return ret;
1242
1243         for (i = start_rgn; i < end_rgn; i++)
1244                 memblock_set_region_node(&type->regions[i], nid);
1245
1246         memblock_merge_regions(type);
1247         return 0;
1248 }
1249 #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
1250
1251 static phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size,
1252                                         phys_addr_t align, phys_addr_t start,
1253                                         phys_addr_t end, int nid,
1254                                         enum memblock_flags flags)
1255 {
1256         phys_addr_t found;
1257
1258         if (!align) {
1259                 /* Can't use WARNs this early in boot on powerpc */
1260                 dump_stack();
1261                 align = SMP_CACHE_BYTES;
1262         }
1263
1264         found = memblock_find_in_range_node(size, align, start, end, nid,
1265                                             flags);
1266         if (found && !memblock_reserve(found, size)) {
1267                 /*
1268                  * The min_count is set to 0 so that memblock allocations are
1269                  * never reported as leaks.
1270                  */
1271                 kmemleak_alloc_phys(found, size, 0, 0);
1272                 return found;
1273         }
1274         return 0;
1275 }
1276
1277 phys_addr_t __init memblock_alloc_range(phys_addr_t size, phys_addr_t align,
1278                                         phys_addr_t start, phys_addr_t end,
1279                                         enum memblock_flags flags)
1280 {
1281         return memblock_alloc_range_nid(size, align, start, end, NUMA_NO_NODE,
1282                                         flags);
1283 }
1284
1285 phys_addr_t __init memblock_alloc_base_nid(phys_addr_t size,
1286                                         phys_addr_t align, phys_addr_t max_addr,
1287                                         int nid, enum memblock_flags flags)
1288 {
1289         return memblock_alloc_range_nid(size, align, 0, max_addr, nid, flags);
1290 }
1291
1292 phys_addr_t __init memblock_phys_alloc_nid(phys_addr_t size, phys_addr_t align, int nid)
1293 {
1294         enum memblock_flags flags = choose_memblock_flags();
1295         phys_addr_t ret;
1296
1297 again:
1298         ret = memblock_alloc_base_nid(size, align, MEMBLOCK_ALLOC_ACCESSIBLE,
1299                                       nid, flags);
1300
1301         if (!ret && (flags & MEMBLOCK_MIRROR)) {
1302                 flags &= ~MEMBLOCK_MIRROR;
1303                 goto again;
1304         }
1305         return ret;
1306 }
1307
1308 phys_addr_t __init __memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr)
1309 {
1310         return memblock_alloc_base_nid(size, align, max_addr, NUMA_NO_NODE,
1311                                        MEMBLOCK_NONE);
1312 }
1313
1314 phys_addr_t __init memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr)
1315 {
1316         phys_addr_t alloc;
1317
1318         alloc = __memblock_alloc_base(size, align, max_addr);
1319
1320         if (alloc == 0)
1321                 panic("ERROR: Failed to allocate %pa bytes below %pa.\n",
1322                       &size, &max_addr);
1323
1324         return alloc;
1325 }
1326
1327 phys_addr_t __init memblock_phys_alloc(phys_addr_t size, phys_addr_t align)
1328 {
1329         return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
1330 }
1331
1332 phys_addr_t __init memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid)
1333 {
1334         phys_addr_t res = memblock_phys_alloc_nid(size, align, nid);
1335
1336         if (res)
1337                 return res;
1338         return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
1339 }
1340
1341 /**
1342  * memblock_alloc_internal - allocate boot memory block
1343  * @size: size of memory block to be allocated in bytes
1344  * @align: alignment of the region and block's size
1345  * @min_addr: the lower bound of the memory region to allocate (phys address)
1346  * @max_addr: the upper bound of the memory region to allocate (phys address)
1347  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
1348  *
1349  * The @min_addr limit is dropped if it can not be satisfied and the allocation
1350  * will fall back to memory below @min_addr. Also, allocation may fall back
1351  * to any node in the system if the specified node can not
1352  * hold the requested memory.
1353  *
1354  * The allocation is performed from memory region limited by
1355  * memblock.current_limit if @max_addr == %MEMBLOCK_ALLOC_ACCESSIBLE.
1356  *
1357  * The phys address of allocated boot memory block is converted to virtual and
1358  * allocated memory is reset to 0.
1359  *
1360  * In addition, function sets the min_count to 0 using kmemleak_alloc for
1361  * allocated boot memory block, so that it is never reported as leaks.
1362  *
1363  * Return:
1364  * Virtual address of allocated memory block on success, NULL on failure.
1365  */
1366 static void * __init memblock_alloc_internal(
1367                                 phys_addr_t size, phys_addr_t align,
1368                                 phys_addr_t min_addr, phys_addr_t max_addr,
1369                                 int nid)
1370 {
1371         phys_addr_t alloc;
1372         void *ptr;
1373         enum memblock_flags flags = choose_memblock_flags();
1374
1375         if (WARN_ONCE(nid == MAX_NUMNODES, "Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n"))
1376                 nid = NUMA_NO_NODE;
1377
1378         /*
1379          * Detect any accidental use of these APIs after slab is ready, as at
1380          * this moment memblock may be deinitialized already and its
1381          * internal data may be destroyed (after execution of memblock_free_all)
1382          */
1383         if (WARN_ON_ONCE(slab_is_available()))
1384                 return kzalloc_node(size, GFP_NOWAIT, nid);
1385
1386         if (!align) {
1387                 dump_stack();
1388                 align = SMP_CACHE_BYTES;
1389         }
1390
1391         if (max_addr > memblock.current_limit)
1392                 max_addr = memblock.current_limit;
1393 again:
1394         alloc = memblock_find_in_range_node(size, align, min_addr, max_addr,
1395                                             nid, flags);
1396         if (alloc && !memblock_reserve(alloc, size))
1397                 goto done;
1398
1399         if (nid != NUMA_NO_NODE) {
1400                 alloc = memblock_find_in_range_node(size, align, min_addr,
1401                                                     max_addr, NUMA_NO_NODE,
1402                                                     flags);
1403                 if (alloc && !memblock_reserve(alloc, size))
1404                         goto done;
1405         }
1406
1407         if (min_addr) {
1408                 min_addr = 0;
1409                 goto again;
1410         }
1411
1412         if (flags & MEMBLOCK_MIRROR) {
1413                 flags &= ~MEMBLOCK_MIRROR;
1414                 pr_warn("Could not allocate %pap bytes of mirrored memory\n",
1415                         &size);
1416                 goto again;
1417         }
1418
1419         return NULL;
1420 done:
1421         ptr = phys_to_virt(alloc);
1422
1423         /* Skip kmemleak for kasan_init() due to high volume. */
1424         if (max_addr != MEMBLOCK_ALLOC_KASAN)
1425                 /*
1426                  * The min_count is set to 0 so that bootmem allocated
1427                  * blocks are never reported as leaks. This is because many
1428                  * of these blocks are only referred via the physical
1429                  * address which is not looked up by kmemleak.
1430                  */
1431                 kmemleak_alloc(ptr, size, 0, 0);
1432
1433         return ptr;
1434 }
1435
1436 /**
1437  * memblock_alloc_try_nid_raw - allocate boot memory block without zeroing
1438  * memory and without panicking
1439  * @size: size of memory block to be allocated in bytes
1440  * @align: alignment of the region and block's size
1441  * @min_addr: the lower bound of the memory region from where the allocation
1442  *        is preferred (phys address)
1443  * @max_addr: the upper bound of the memory region from where the allocation
1444  *            is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
1445  *            allocate only from memory limited by memblock.current_limit value
1446  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
1447  *
1448  * Public function, provides additional debug information (including caller
1449  * info), if enabled. Does not zero allocated memory, does not panic if request
1450  * cannot be satisfied.
1451  *
1452  * Return:
1453  * Virtual address of allocated memory block on success, NULL on failure.
1454  */
1455 void * __init memblock_alloc_try_nid_raw(
1456                         phys_addr_t size, phys_addr_t align,
1457                         phys_addr_t min_addr, phys_addr_t max_addr,
1458                         int nid)
1459 {
1460         void *ptr;
1461
1462         memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pF\n",
1463                      __func__, (u64)size, (u64)align, nid, &min_addr,
1464                      &max_addr, (void *)_RET_IP_);
1465
1466         ptr = memblock_alloc_internal(size, align,
1467                                            min_addr, max_addr, nid);
1468         if (ptr && size > 0)
1469                 page_init_poison(ptr, size);
1470
1471         return ptr;
1472 }
1473
1474 /**
1475  * memblock_alloc_try_nid_nopanic - allocate boot memory block
1476  * @size: size of memory block to be allocated in bytes
1477  * @align: alignment of the region and block's size
1478  * @min_addr: the lower bound of the memory region from where the allocation
1479  *        is preferred (phys address)
1480  * @max_addr: the upper bound of the memory region from where the allocation
1481  *            is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
1482  *            allocate only from memory limited by memblock.current_limit value
1483  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
1484  *
1485  * Public function, provides additional debug information (including caller
1486  * info), if enabled. This function zeroes the allocated memory.
1487  *
1488  * Return:
1489  * Virtual address of allocated memory block on success, NULL on failure.
1490  */
1491 void * __init memblock_alloc_try_nid_nopanic(
1492                                 phys_addr_t size, phys_addr_t align,
1493                                 phys_addr_t min_addr, phys_addr_t max_addr,
1494                                 int nid)
1495 {
1496         void *ptr;
1497
1498         memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pF\n",
1499                      __func__, (u64)size, (u64)align, nid, &min_addr,
1500                      &max_addr, (void *)_RET_IP_);
1501
1502         ptr = memblock_alloc_internal(size, align,
1503                                            min_addr, max_addr, nid);
1504         if (ptr)
1505                 memset(ptr, 0, size);
1506         return ptr;
1507 }
1508
1509 /**
1510  * memblock_alloc_try_nid - allocate boot memory block with panicking
1511  * @size: size of memory block to be allocated in bytes
1512  * @align: alignment of the region and block's size
1513  * @min_addr: the lower bound of the memory region from where the allocation
1514  *        is preferred (phys address)
1515  * @max_addr: the upper bound of the memory region from where the allocation
1516  *            is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
1517  *            allocate only from memory limited by memblock.current_limit value
1518  * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
1519  *
1520  * Public panicking version of memblock_alloc_try_nid_nopanic()
1521  * which provides debug information (including caller info), if enabled,
1522  * and panics if the request can not be satisfied.
1523  *
1524  * Return:
1525  * Virtual address of allocated memory block on success, NULL on failure.
1526  */
1527 void * __init memblock_alloc_try_nid(
1528                         phys_addr_t size, phys_addr_t align,
1529                         phys_addr_t min_addr, phys_addr_t max_addr,
1530                         int nid)
1531 {
1532         void *ptr;
1533
1534         memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pF\n",
1535                      __func__, (u64)size, (u64)align, nid, &min_addr,
1536                      &max_addr, (void *)_RET_IP_);
1537         ptr = memblock_alloc_internal(size, align,
1538                                            min_addr, max_addr, nid);
1539         if (ptr) {
1540                 memset(ptr, 0, size);
1541                 return ptr;
1542         }
1543
1544         panic("%s: Failed to allocate %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa\n",
1545               __func__, (u64)size, (u64)align, nid, &min_addr, &max_addr);
1546         return NULL;
1547 }
1548
1549 /**
1550  * __memblock_free_late - free bootmem block pages directly to buddy allocator
1551  * @base: phys starting address of the  boot memory block
1552  * @size: size of the boot memory block in bytes
1553  *
1554  * This is only useful when the bootmem allocator has already been torn
1555  * down, but we are still initializing the system.  Pages are released directly
1556  * to the buddy allocator, no bootmem metadata is updated because it is gone.
1557  */
1558 void __init __memblock_free_late(phys_addr_t base, phys_addr_t size)
1559 {
1560         phys_addr_t cursor, end;
1561
1562         end = base + size - 1;
1563         memblock_dbg("%s: [%pa-%pa] %pF\n",
1564                      __func__, &base, &end, (void *)_RET_IP_);
1565         kmemleak_free_part_phys(base, size);
1566         cursor = PFN_UP(base);
1567         end = PFN_DOWN(base + size);
1568
1569         for (; cursor < end; cursor++) {
1570                 memblock_free_pages(pfn_to_page(cursor), cursor, 0);
1571                 totalram_pages_inc();
1572         }
1573 }
1574
1575 /*
1576  * Remaining API functions
1577  */
1578
1579 phys_addr_t __init_memblock memblock_phys_mem_size(void)
1580 {
1581         return memblock.memory.total_size;
1582 }
1583
1584 phys_addr_t __init_memblock memblock_reserved_size(void)
1585 {
1586         return memblock.reserved.total_size;
1587 }
1588
1589 phys_addr_t __init memblock_mem_size(unsigned long limit_pfn)
1590 {
1591         unsigned long pages = 0;
1592         struct memblock_region *r;
1593         unsigned long start_pfn, end_pfn;
1594
1595         for_each_memblock(memory, r) {
1596                 start_pfn = memblock_region_memory_base_pfn(r);
1597                 end_pfn = memblock_region_memory_end_pfn(r);
1598                 start_pfn = min_t(unsigned long, start_pfn, limit_pfn);
1599                 end_pfn = min_t(unsigned long, end_pfn, limit_pfn);
1600                 pages += end_pfn - start_pfn;
1601         }
1602
1603         return PFN_PHYS(pages);
1604 }
1605
1606 /* lowest address */
1607 phys_addr_t __init_memblock memblock_start_of_DRAM(void)
1608 {
1609         return memblock.memory.regions[0].base;
1610 }
1611
1612 phys_addr_t __init_memblock memblock_end_of_DRAM(void)
1613 {
1614         int idx = memblock.memory.cnt - 1;
1615
1616         return (memblock.memory.regions[idx].base + memblock.memory.regions[idx].size);
1617 }
1618
1619 static phys_addr_t __init_memblock __find_max_addr(phys_addr_t limit)
1620 {
1621         phys_addr_t max_addr = PHYS_ADDR_MAX;
1622         struct memblock_region *r;
1623
1624         /*
1625          * translate the memory @limit size into the max address within one of
1626          * the memory memblock regions, if the @limit exceeds the total size
1627          * of those regions, max_addr will keep original value PHYS_ADDR_MAX
1628          */
1629         for_each_memblock(memory, r) {
1630                 if (limit <= r->size) {
1631                         max_addr = r->base + limit;
1632                         break;
1633                 }
1634                 limit -= r->size;
1635         }
1636
1637         return max_addr;
1638 }
1639
1640 void __init memblock_enforce_memory_limit(phys_addr_t limit)
1641 {
1642         phys_addr_t max_addr = PHYS_ADDR_MAX;
1643
1644         if (!limit)
1645                 return;
1646
1647         max_addr = __find_max_addr(limit);
1648
1649         /* @limit exceeds the total size of the memory, do nothing */
1650         if (max_addr == PHYS_ADDR_MAX)
1651                 return;
1652
1653         /* truncate both memory and reserved regions */
1654         memblock_remove_range(&memblock.memory, max_addr,
1655                               PHYS_ADDR_MAX);
1656         memblock_remove_range(&memblock.reserved, max_addr,
1657                               PHYS_ADDR_MAX);
1658 }
1659
1660 void __init memblock_cap_memory_range(phys_addr_t base, phys_addr_t size)
1661 {
1662         int start_rgn, end_rgn;
1663         int i, ret;
1664
1665         if (!size)
1666                 return;
1667
1668         ret = memblock_isolate_range(&memblock.memory, base, size,
1669                                                 &start_rgn, &end_rgn);
1670         if (ret)
1671                 return;
1672
1673         /* remove all the MAP regions */
1674         for (i = memblock.memory.cnt - 1; i >= end_rgn; i--)
1675                 if (!memblock_is_nomap(&memblock.memory.regions[i]))
1676                         memblock_remove_region(&memblock.memory, i);
1677
1678         for (i = start_rgn - 1; i >= 0; i--)
1679                 if (!memblock_is_nomap(&memblock.memory.regions[i]))
1680                         memblock_remove_region(&memblock.memory, i);
1681
1682         /* truncate the reserved regions */
1683         memblock_remove_range(&memblock.reserved, 0, base);
1684         memblock_remove_range(&memblock.reserved,
1685                         base + size, PHYS_ADDR_MAX);
1686 }
1687
1688 void __init memblock_mem_limit_remove_map(phys_addr_t limit)
1689 {
1690         phys_addr_t max_addr;
1691
1692         if (!limit)
1693                 return;
1694
1695         max_addr = __find_max_addr(limit);
1696
1697         /* @limit exceeds the total size of the memory, do nothing */
1698         if (max_addr == PHYS_ADDR_MAX)
1699                 return;
1700
1701         memblock_cap_memory_range(0, max_addr);
1702 }
1703
1704 static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr)
1705 {
1706         unsigned int left = 0, right = type->cnt;
1707
1708         do {
1709                 unsigned int mid = (right + left) / 2;
1710
1711                 if (addr < type->regions[mid].base)
1712                         right = mid;
1713                 else if (addr >= (type->regions[mid].base +
1714                                   type->regions[mid].size))
1715                         left = mid + 1;
1716                 else
1717                         return mid;
1718         } while (left < right);
1719         return -1;
1720 }
1721
1722 bool __init_memblock memblock_is_reserved(phys_addr_t addr)
1723 {
1724         return memblock_search(&memblock.reserved, addr) != -1;
1725 }
1726
1727 bool __init_memblock memblock_is_memory(phys_addr_t addr)
1728 {
1729         return memblock_search(&memblock.memory, addr) != -1;
1730 }
1731
1732 bool __init_memblock memblock_is_map_memory(phys_addr_t addr)
1733 {
1734         int i = memblock_search(&memblock.memory, addr);
1735
1736         if (i == -1)
1737                 return false;
1738         return !memblock_is_nomap(&memblock.memory.regions[i]);
1739 }
1740
1741 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
1742 int __init_memblock memblock_search_pfn_nid(unsigned long pfn,
1743                          unsigned long *start_pfn, unsigned long *end_pfn)
1744 {
1745         struct memblock_type *type = &memblock.memory;
1746         int mid = memblock_search(type, PFN_PHYS(pfn));
1747
1748         if (mid == -1)
1749                 return -1;
1750
1751         *start_pfn = PFN_DOWN(type->regions[mid].base);
1752         *end_pfn = PFN_DOWN(type->regions[mid].base + type->regions[mid].size);
1753
1754         return type->regions[mid].nid;
1755 }
1756 #endif
1757
1758 /**
1759  * memblock_is_region_memory - check if a region is a subset of memory
1760  * @base: base of region to check
1761  * @size: size of region to check
1762  *
1763  * Check if the region [@base, @base + @size) is a subset of a memory block.
1764  *
1765  * Return:
1766  * 0 if false, non-zero if true
1767  */
1768 bool __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size)
1769 {
1770         int idx = memblock_search(&memblock.memory, base);
1771         phys_addr_t end = base + memblock_cap_size(base, &size);
1772
1773         if (idx == -1)
1774                 return false;
1775         return (memblock.memory.regions[idx].base +
1776                  memblock.memory.regions[idx].size) >= end;
1777 }
1778
1779 /**
1780  * memblock_is_region_reserved - check if a region intersects reserved memory
1781  * @base: base of region to check
1782  * @size: size of region to check
1783  *
1784  * Check if the region [@base, @base + @size) intersects a reserved
1785  * memory block.
1786  *
1787  * Return:
1788  * True if they intersect, false if not.
1789  */
1790 bool __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size)
1791 {
1792         memblock_cap_size(base, &size);
1793         return memblock_overlaps_region(&memblock.reserved, base, size);
1794 }
1795
1796 void __init_memblock memblock_trim_memory(phys_addr_t align)
1797 {
1798         phys_addr_t start, end, orig_start, orig_end;
1799         struct memblock_region *r;
1800
1801         for_each_memblock(memory, r) {
1802                 orig_start = r->base;
1803                 orig_end = r->base + r->size;
1804                 start = round_up(orig_start, align);
1805                 end = round_down(orig_end, align);
1806
1807                 if (start == orig_start && end == orig_end)
1808                         continue;
1809
1810                 if (start < end) {
1811                         r->base = start;
1812                         r->size = end - start;
1813                 } else {
1814                         memblock_remove_region(&memblock.memory,
1815                                                r - memblock.memory.regions);
1816                         r--;
1817                 }
1818         }
1819 }
1820
1821 void __init_memblock memblock_set_current_limit(phys_addr_t limit)
1822 {
1823         memblock.current_limit = limit;
1824 }
1825
1826 phys_addr_t __init_memblock memblock_get_current_limit(void)
1827 {
1828         return memblock.current_limit;
1829 }
1830
1831 static void __init_memblock memblock_dump(struct memblock_type *type)
1832 {
1833         phys_addr_t base, end, size;
1834         enum memblock_flags flags;
1835         int idx;
1836         struct memblock_region *rgn;
1837
1838         pr_info(" %s.cnt  = 0x%lx\n", type->name, type->cnt);
1839
1840         for_each_memblock_type(idx, type, rgn) {
1841                 char nid_buf[32] = "";
1842
1843                 base = rgn->base;
1844                 size = rgn->size;
1845                 end = base + size - 1;
1846                 flags = rgn->flags;
1847 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
1848                 if (memblock_get_region_node(rgn) != MAX_NUMNODES)
1849                         snprintf(nid_buf, sizeof(nid_buf), " on node %d",
1850                                  memblock_get_region_node(rgn));
1851 #endif
1852                 pr_info(" %s[%#x]\t[%pa-%pa], %pa bytes%s flags: %#x\n",
1853                         type->name, idx, &base, &end, &size, nid_buf, flags);
1854         }
1855 }
1856
1857 void __init_memblock __memblock_dump_all(void)
1858 {
1859         pr_info("MEMBLOCK configuration:\n");
1860         pr_info(" memory size = %pa reserved size = %pa\n",
1861                 &memblock.memory.total_size,
1862                 &memblock.reserved.total_size);
1863
1864         memblock_dump(&memblock.memory);
1865         memblock_dump(&memblock.reserved);
1866 #ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
1867         memblock_dump(&memblock.physmem);
1868 #endif
1869 }
1870
1871 void __init memblock_allow_resize(void)
1872 {
1873         memblock_can_resize = 1;
1874 }
1875
1876 static int __init early_memblock(char *p)
1877 {
1878         if (p && strstr(p, "debug"))
1879                 memblock_debug = 1;
1880         return 0;
1881 }
1882 early_param("memblock", early_memblock);
1883
1884 static void __init __free_pages_memory(unsigned long start, unsigned long end)
1885 {
1886         int order;
1887
1888         while (start < end) {
1889                 order = min(MAX_ORDER - 1UL, __ffs(start));
1890
1891                 while (start + (1UL << order) > end)
1892                         order--;
1893
1894                 memblock_free_pages(pfn_to_page(start), start, order);
1895
1896                 start += (1UL << order);
1897         }
1898 }
1899
1900 static unsigned long __init __free_memory_core(phys_addr_t start,
1901                                  phys_addr_t end)
1902 {
1903         unsigned long start_pfn = PFN_UP(start);
1904         unsigned long end_pfn = min_t(unsigned long,
1905                                       PFN_DOWN(end), max_low_pfn);
1906
1907         if (start_pfn >= end_pfn)
1908                 return 0;
1909
1910         __free_pages_memory(start_pfn, end_pfn);
1911
1912         return end_pfn - start_pfn;
1913 }
1914
1915 static unsigned long __init free_low_memory_core_early(void)
1916 {
1917         unsigned long count = 0;
1918         phys_addr_t start, end;
1919         u64 i;
1920
1921         memblock_clear_hotplug(0, -1);
1922
1923         for_each_reserved_mem_region(i, &start, &end)
1924                 reserve_bootmem_region(start, end);
1925
1926         /*
1927          * We need to use NUMA_NO_NODE instead of NODE_DATA(0)->node_id
1928          *  because in some case like Node0 doesn't have RAM installed
1929          *  low ram will be on Node1
1930          */
1931         for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, &start, &end,
1932                                 NULL)
1933                 count += __free_memory_core(start, end);
1934
1935         return count;
1936 }
1937
1938 static int reset_managed_pages_done __initdata;
1939
1940 void reset_node_managed_pages(pg_data_t *pgdat)
1941 {
1942         struct zone *z;
1943
1944         for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
1945                 atomic_long_set(&z->managed_pages, 0);
1946 }
1947
1948 void __init reset_all_zones_managed_pages(void)
1949 {
1950         struct pglist_data *pgdat;
1951
1952         if (reset_managed_pages_done)
1953                 return;
1954
1955         for_each_online_pgdat(pgdat)
1956                 reset_node_managed_pages(pgdat);
1957
1958         reset_managed_pages_done = 1;
1959 }
1960
1961 /**
1962  * memblock_free_all - release free pages to the buddy allocator
1963  *
1964  * Return: the number of pages actually released.
1965  */
1966 unsigned long __init memblock_free_all(void)
1967 {
1968         unsigned long pages;
1969
1970         reset_all_zones_managed_pages();
1971
1972         pages = free_low_memory_core_early();
1973         totalram_pages_add(pages);
1974
1975         return pages;
1976 }
1977
1978 #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_ARCH_DISCARD_MEMBLOCK)
1979
1980 static int memblock_debug_show(struct seq_file *m, void *private)
1981 {
1982         struct memblock_type *type = m->private;
1983         struct memblock_region *reg;
1984         int i;
1985         phys_addr_t end;
1986
1987         for (i = 0; i < type->cnt; i++) {
1988                 reg = &type->regions[i];
1989                 end = reg->base + reg->size - 1;
1990
1991                 seq_printf(m, "%4d: ", i);
1992                 seq_printf(m, "%pa..%pa\n", &reg->base, &end);
1993         }
1994         return 0;
1995 }
1996 DEFINE_SHOW_ATTRIBUTE(memblock_debug);
1997
1998 static int __init memblock_init_debugfs(void)
1999 {
2000         struct dentry *root = debugfs_create_dir("memblock", NULL);
2001         if (!root)
2002                 return -ENXIO;
2003         debugfs_create_file("memory", 0444, root,
2004                             &memblock.memory, &memblock_debug_fops);
2005         debugfs_create_file("reserved", 0444, root,
2006                             &memblock.reserved, &memblock_debug_fops);
2007 #ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
2008         debugfs_create_file("physmem", 0444, root,
2009                             &memblock.physmem, &memblock_debug_fops);
2010 #endif
2011
2012         return 0;
2013 }
2014 __initcall(memblock_init_debugfs);
2015
2016 #endif /* CONFIG_DEBUG_FS */