Merge branch 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[sfrench/cifs-2.6.git] / include / linux / mtd / mtd.h
1 /*
2  * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
17  *
18  */
19
20 #ifndef __MTD_MTD_H__
21 #define __MTD_MTD_H__
22
23 #include <linux/types.h>
24 #include <linux/uio.h>
25 #include <linux/notifier.h>
26 #include <linux/device.h>
27 #include <linux/of.h>
28
29 #include <mtd/mtd-abi.h>
30
31 #include <asm/div64.h>
32
33 #define MTD_ERASE_PENDING       0x01
34 #define MTD_ERASING             0x02
35 #define MTD_ERASE_SUSPEND       0x04
36 #define MTD_ERASE_DONE          0x08
37 #define MTD_ERASE_FAILED        0x10
38
39 #define MTD_FAIL_ADDR_UNKNOWN -1LL
40
41 /*
42  * If the erase fails, fail_addr might indicate exactly which block failed. If
43  * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
44  * or was not specific to any particular block.
45  */
46 struct erase_info {
47         struct mtd_info *mtd;
48         uint64_t addr;
49         uint64_t len;
50         uint64_t fail_addr;
51         u_long time;
52         u_long retries;
53         unsigned dev;
54         unsigned cell;
55         void (*callback) (struct erase_info *self);
56         u_long priv;
57         u_char state;
58         struct erase_info *next;
59 };
60
61 struct mtd_erase_region_info {
62         uint64_t offset;                /* At which this region starts, from the beginning of the MTD */
63         uint32_t erasesize;             /* For this region */
64         uint32_t numblocks;             /* Number of blocks of erasesize in this region */
65         unsigned long *lockmap;         /* If keeping bitmap of locks */
66 };
67
68 /**
69  * struct mtd_oob_ops - oob operation operands
70  * @mode:       operation mode
71  *
72  * @len:        number of data bytes to write/read
73  *
74  * @retlen:     number of data bytes written/read
75  *
76  * @ooblen:     number of oob bytes to write/read
77  * @oobretlen:  number of oob bytes written/read
78  * @ooboffs:    offset of oob data in the oob area (only relevant when
79  *              mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
80  * @datbuf:     data buffer - if NULL only oob data are read/written
81  * @oobbuf:     oob data buffer
82  *
83  * Note, it is allowed to read more than one OOB area at one go, but not write.
84  * The interface assumes that the OOB write requests program only one page's
85  * OOB area.
86  */
87 struct mtd_oob_ops {
88         unsigned int    mode;
89         size_t          len;
90         size_t          retlen;
91         size_t          ooblen;
92         size_t          oobretlen;
93         uint32_t        ooboffs;
94         uint8_t         *datbuf;
95         uint8_t         *oobbuf;
96 };
97
98 #define MTD_MAX_OOBFREE_ENTRIES_LARGE   32
99 #define MTD_MAX_ECCPOS_ENTRIES_LARGE    640
100 /**
101  * struct mtd_oob_region - oob region definition
102  * @offset: region offset
103  * @length: region length
104  *
105  * This structure describes a region of the OOB area, and is used
106  * to retrieve ECC or free bytes sections.
107  * Each section is defined by an offset within the OOB area and a
108  * length.
109  */
110 struct mtd_oob_region {
111         u32 offset;
112         u32 length;
113 };
114
115 /*
116  * struct mtd_ooblayout_ops - NAND OOB layout operations
117  * @ecc: function returning an ECC region in the OOB area.
118  *       Should return -ERANGE if %section exceeds the total number of
119  *       ECC sections.
120  * @free: function returning a free region in the OOB area.
121  *        Should return -ERANGE if %section exceeds the total number of
122  *        free sections.
123  */
124 struct mtd_ooblayout_ops {
125         int (*ecc)(struct mtd_info *mtd, int section,
126                    struct mtd_oob_region *oobecc);
127         int (*free)(struct mtd_info *mtd, int section,
128                     struct mtd_oob_region *oobfree);
129 };
130
131 /**
132  * struct mtd_pairing_info - page pairing information
133  *
134  * @pair: pair id
135  * @group: group id
136  *
137  * The term "pair" is used here, even though TLC NANDs might group pages by 3
138  * (3 bits in a single cell). A pair should regroup all pages that are sharing
139  * the same cell. Pairs are then indexed in ascending order.
140  *
141  * @group is defining the position of a page in a given pair. It can also be
142  * seen as the bit position in the cell: page attached to bit 0 belongs to
143  * group 0, page attached to bit 1 belongs to group 1, etc.
144  *
145  * Example:
146  * The H27UCG8T2BTR-BC datasheet describes the following pairing scheme:
147  *
148  *              group-0         group-1
149  *
150  *  pair-0      page-0          page-4
151  *  pair-1      page-1          page-5
152  *  pair-2      page-2          page-8
153  *  ...
154  *  pair-127    page-251        page-255
155  *
156  *
157  * Note that the "group" and "pair" terms were extracted from Samsung and
158  * Hynix datasheets, and might be referenced under other names in other
159  * datasheets (Micron is describing this concept as "shared pages").
160  */
161 struct mtd_pairing_info {
162         int pair;
163         int group;
164 };
165
166 /**
167  * struct mtd_pairing_scheme - page pairing scheme description
168  *
169  * @ngroups: number of groups. Should be related to the number of bits
170  *           per cell.
171  * @get_info: converts a write-unit (page number within an erase block) into
172  *            mtd_pairing information (pair + group). This function should
173  *            fill the info parameter based on the wunit index or return
174  *            -EINVAL if the wunit parameter is invalid.
175  * @get_wunit: converts pairing information into a write-unit (page) number.
176  *             This function should return the wunit index pointed by the
177  *             pairing information described in the info argument. It should
178  *             return -EINVAL, if there's no wunit corresponding to the
179  *             passed pairing information.
180  *
181  * See mtd_pairing_info documentation for a detailed explanation of the
182  * pair and group concepts.
183  *
184  * The mtd_pairing_scheme structure provides a generic solution to represent
185  * NAND page pairing scheme. Instead of exposing two big tables to do the
186  * write-unit <-> (pair + group) conversions, we ask the MTD drivers to
187  * implement the ->get_info() and ->get_wunit() functions.
188  *
189  * MTD users will then be able to query these information by using the
190  * mtd_pairing_info_to_wunit() and mtd_wunit_to_pairing_info() helpers.
191  *
192  * @ngroups is here to help MTD users iterating over all the pages in a
193  * given pair. This value can be retrieved by MTD users using the
194  * mtd_pairing_groups() helper.
195  *
196  * Examples are given in the mtd_pairing_info_to_wunit() and
197  * mtd_wunit_to_pairing_info() documentation.
198  */
199 struct mtd_pairing_scheme {
200         int ngroups;
201         int (*get_info)(struct mtd_info *mtd, int wunit,
202                         struct mtd_pairing_info *info);
203         int (*get_wunit)(struct mtd_info *mtd,
204                          const struct mtd_pairing_info *info);
205 };
206
207 struct module;  /* only needed for owner field in mtd_info */
208
209 struct mtd_info {
210         u_char type;
211         uint32_t flags;
212         uint64_t size;   // Total size of the MTD
213
214         /* "Major" erase size for the device. Naïve users may take this
215          * to be the only erase size available, or may use the more detailed
216          * information below if they desire
217          */
218         uint32_t erasesize;
219         /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
220          * though individual bits can be cleared), in case of NAND flash it is
221          * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
222          * it is of ECC block size, etc. It is illegal to have writesize = 0.
223          * Any driver registering a struct mtd_info must ensure a writesize of
224          * 1 or larger.
225          */
226         uint32_t writesize;
227
228         /*
229          * Size of the write buffer used by the MTD. MTD devices having a write
230          * buffer can write multiple writesize chunks at a time. E.g. while
231          * writing 4 * writesize bytes to a device with 2 * writesize bytes
232          * buffer the MTD driver can (but doesn't have to) do 2 writesize
233          * operations, but not 4. Currently, all NANDs have writebufsize
234          * equivalent to writesize (NAND page size). Some NOR flashes do have
235          * writebufsize greater than writesize.
236          */
237         uint32_t writebufsize;
238
239         uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
240         uint32_t oobavail;  // Available OOB bytes per block
241
242         /*
243          * If erasesize is a power of 2 then the shift is stored in
244          * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
245          */
246         unsigned int erasesize_shift;
247         unsigned int writesize_shift;
248         /* Masks based on erasesize_shift and writesize_shift */
249         unsigned int erasesize_mask;
250         unsigned int writesize_mask;
251
252         /*
253          * read ops return -EUCLEAN if max number of bitflips corrected on any
254          * one region comprising an ecc step equals or exceeds this value.
255          * Settable by driver, else defaults to ecc_strength.  User can override
256          * in sysfs.  N.B. The meaning of the -EUCLEAN return code has changed;
257          * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
258          */
259         unsigned int bitflip_threshold;
260
261         // Kernel-only stuff starts here.
262         const char *name;
263         int index;
264
265         /* OOB layout description */
266         const struct mtd_ooblayout_ops *ooblayout;
267
268         /* NAND pairing scheme, only provided for MLC/TLC NANDs */
269         const struct mtd_pairing_scheme *pairing;
270
271         /* the ecc step size. */
272         unsigned int ecc_step_size;
273
274         /* max number of correctible bit errors per ecc step */
275         unsigned int ecc_strength;
276
277         /* Data for variable erase regions. If numeraseregions is zero,
278          * it means that the whole device has erasesize as given above.
279          */
280         int numeraseregions;
281         struct mtd_erase_region_info *eraseregions;
282
283         /*
284          * Do not call via these pointers, use corresponding mtd_*()
285          * wrappers instead.
286          */
287         int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
288         int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
289                        size_t *retlen, void **virt, resource_size_t *phys);
290         int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
291         unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
292                                              unsigned long len,
293                                              unsigned long offset,
294                                              unsigned long flags);
295         int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
296                       size_t *retlen, u_char *buf);
297         int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
298                        size_t *retlen, const u_char *buf);
299         int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
300                              size_t *retlen, const u_char *buf);
301         int (*_read_oob) (struct mtd_info *mtd, loff_t from,
302                           struct mtd_oob_ops *ops);
303         int (*_write_oob) (struct mtd_info *mtd, loff_t to,
304                            struct mtd_oob_ops *ops);
305         int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len,
306                                     size_t *retlen, struct otp_info *buf);
307         int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
308                                     size_t len, size_t *retlen, u_char *buf);
309         int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len,
310                                     size_t *retlen, struct otp_info *buf);
311         int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
312                                     size_t len, size_t *retlen, u_char *buf);
313         int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
314                                      size_t len, size_t *retlen, u_char *buf);
315         int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
316                                     size_t len);
317         int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
318                         unsigned long count, loff_t to, size_t *retlen);
319         void (*_sync) (struct mtd_info *mtd);
320         int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
321         int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
322         int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
323         int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
324         int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
325         int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
326         int (*_max_bad_blocks) (struct mtd_info *mtd, loff_t ofs, size_t len);
327         int (*_suspend) (struct mtd_info *mtd);
328         void (*_resume) (struct mtd_info *mtd);
329         void (*_reboot) (struct mtd_info *mtd);
330         /*
331          * If the driver is something smart, like UBI, it may need to maintain
332          * its own reference counting. The below functions are only for driver.
333          */
334         int (*_get_device) (struct mtd_info *mtd);
335         void (*_put_device) (struct mtd_info *mtd);
336
337         struct notifier_block reboot_notifier;  /* default mode before reboot */
338
339         /* ECC status information */
340         struct mtd_ecc_stats ecc_stats;
341         /* Subpage shift (NAND) */
342         int subpage_sft;
343
344         void *priv;
345
346         struct module *owner;
347         struct device dev;
348         int usecount;
349 };
350
351 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
352                       struct mtd_oob_region *oobecc);
353 int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
354                                  int *section,
355                                  struct mtd_oob_region *oobregion);
356 int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
357                                const u8 *oobbuf, int start, int nbytes);
358 int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
359                                u8 *oobbuf, int start, int nbytes);
360 int mtd_ooblayout_free(struct mtd_info *mtd, int section,
361                        struct mtd_oob_region *oobfree);
362 int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
363                                 const u8 *oobbuf, int start, int nbytes);
364 int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
365                                 u8 *oobbuf, int start, int nbytes);
366 int mtd_ooblayout_count_freebytes(struct mtd_info *mtd);
367 int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd);
368
369 static inline void mtd_set_ooblayout(struct mtd_info *mtd,
370                                      const struct mtd_ooblayout_ops *ooblayout)
371 {
372         mtd->ooblayout = ooblayout;
373 }
374
375 static inline void mtd_set_pairing_scheme(struct mtd_info *mtd,
376                                 const struct mtd_pairing_scheme *pairing)
377 {
378         mtd->pairing = pairing;
379 }
380
381 static inline void mtd_set_of_node(struct mtd_info *mtd,
382                                    struct device_node *np)
383 {
384         mtd->dev.of_node = np;
385         if (!mtd->name)
386                 of_property_read_string(np, "label", &mtd->name);
387 }
388
389 static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
390 {
391         return mtd->dev.of_node;
392 }
393
394 static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
395 {
396         return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
397 }
398
399 static inline int mtd_max_bad_blocks(struct mtd_info *mtd,
400                                      loff_t ofs, size_t len)
401 {
402         if (!mtd->_max_bad_blocks)
403                 return -ENOTSUPP;
404
405         if (mtd->size < (len + ofs) || ofs < 0)
406                 return -EINVAL;
407
408         return mtd->_max_bad_blocks(mtd, ofs, len);
409 }
410
411 int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
412                               struct mtd_pairing_info *info);
413 int mtd_pairing_info_to_wunit(struct mtd_info *mtd,
414                               const struct mtd_pairing_info *info);
415 int mtd_pairing_groups(struct mtd_info *mtd);
416 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
417 int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
418               void **virt, resource_size_t *phys);
419 int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
420 unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
421                                     unsigned long offset, unsigned long flags);
422 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
423              u_char *buf);
424 int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
425               const u_char *buf);
426 int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
427                     const u_char *buf);
428
429 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
430 int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops);
431
432 int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
433                            struct otp_info *buf);
434 int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
435                            size_t *retlen, u_char *buf);
436 int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
437                            struct otp_info *buf);
438 int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
439                            size_t *retlen, u_char *buf);
440 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
441                             size_t *retlen, u_char *buf);
442 int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
443
444 int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
445                unsigned long count, loff_t to, size_t *retlen);
446
447 static inline void mtd_sync(struct mtd_info *mtd)
448 {
449         if (mtd->_sync)
450                 mtd->_sync(mtd);
451 }
452
453 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
454 int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
455 int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
456 int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs);
457 int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
458 int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
459
460 static inline int mtd_suspend(struct mtd_info *mtd)
461 {
462         return mtd->_suspend ? mtd->_suspend(mtd) : 0;
463 }
464
465 static inline void mtd_resume(struct mtd_info *mtd)
466 {
467         if (mtd->_resume)
468                 mtd->_resume(mtd);
469 }
470
471 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
472 {
473         if (mtd->erasesize_shift)
474                 return sz >> mtd->erasesize_shift;
475         do_div(sz, mtd->erasesize);
476         return sz;
477 }
478
479 static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
480 {
481         if (mtd->erasesize_shift)
482                 return sz & mtd->erasesize_mask;
483         return do_div(sz, mtd->erasesize);
484 }
485
486 static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
487 {
488         if (mtd->writesize_shift)
489                 return sz >> mtd->writesize_shift;
490         do_div(sz, mtd->writesize);
491         return sz;
492 }
493
494 static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
495 {
496         if (mtd->writesize_shift)
497                 return sz & mtd->writesize_mask;
498         return do_div(sz, mtd->writesize);
499 }
500
501 static inline int mtd_wunit_per_eb(struct mtd_info *mtd)
502 {
503         return mtd->erasesize / mtd->writesize;
504 }
505
506 static inline int mtd_offset_to_wunit(struct mtd_info *mtd, loff_t offs)
507 {
508         return mtd_div_by_ws(mtd_mod_by_eb(offs, mtd), mtd);
509 }
510
511 static inline loff_t mtd_wunit_to_offset(struct mtd_info *mtd, loff_t base,
512                                          int wunit)
513 {
514         return base + (wunit * mtd->writesize);
515 }
516
517
518 static inline int mtd_has_oob(const struct mtd_info *mtd)
519 {
520         return mtd->_read_oob && mtd->_write_oob;
521 }
522
523 static inline int mtd_type_is_nand(const struct mtd_info *mtd)
524 {
525         return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
526 }
527
528 static inline int mtd_can_have_bb(const struct mtd_info *mtd)
529 {
530         return !!mtd->_block_isbad;
531 }
532
533         /* Kernel-side ioctl definitions */
534
535 struct mtd_partition;
536 struct mtd_part_parser_data;
537
538 extern int mtd_device_parse_register(struct mtd_info *mtd,
539                                      const char * const *part_probe_types,
540                                      struct mtd_part_parser_data *parser_data,
541                                      const struct mtd_partition *defparts,
542                                      int defnr_parts);
543 #define mtd_device_register(master, parts, nr_parts)    \
544         mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
545 extern int mtd_device_unregister(struct mtd_info *master);
546 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
547 extern int __get_mtd_device(struct mtd_info *mtd);
548 extern void __put_mtd_device(struct mtd_info *mtd);
549 extern struct mtd_info *get_mtd_device_nm(const char *name);
550 extern void put_mtd_device(struct mtd_info *mtd);
551
552
553 struct mtd_notifier {
554         void (*add)(struct mtd_info *mtd);
555         void (*remove)(struct mtd_info *mtd);
556         struct list_head list;
557 };
558
559
560 extern void register_mtd_user (struct mtd_notifier *new);
561 extern int unregister_mtd_user (struct mtd_notifier *old);
562 void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
563
564 void mtd_erase_callback(struct erase_info *instr);
565
566 static inline int mtd_is_bitflip(int err) {
567         return err == -EUCLEAN;
568 }
569
570 static inline int mtd_is_eccerr(int err) {
571         return err == -EBADMSG;
572 }
573
574 static inline int mtd_is_bitflip_or_eccerr(int err) {
575         return mtd_is_bitflip(err) || mtd_is_eccerr(err);
576 }
577
578 unsigned mtd_mmap_capabilities(struct mtd_info *mtd);
579
580 #endif /* __MTD_MTD_H__ */