regmap: Try to work around Kconfig exploding on HWSPINLOCK
[sfrench/cifs-2.6.git] / include / drm / drm_encoder.h
1 /*
2  * Copyright (c) 2016 Intel Corporation
3  *
4  * Permission to use, copy, modify, distribute, and sell this software and its
5  * documentation for any purpose is hereby granted without fee, provided that
6  * the above copyright notice appear in all copies and that both that copyright
7  * notice and this permission notice appear in supporting documentation, and
8  * that the name of the copyright holders not be used in advertising or
9  * publicity pertaining to distribution of the software without specific,
10  * written prior permission.  The copyright holders make no representations
11  * about the suitability of this software for any purpose.  It is provided "as
12  * is" without express or implied warranty.
13  *
14  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20  * OF THIS SOFTWARE.
21  */
22
23 #ifndef __DRM_ENCODER_H__
24 #define __DRM_ENCODER_H__
25
26 #include <linux/list.h>
27 #include <linux/ctype.h>
28 #include <drm/drm_crtc.h>
29 #include <drm/drm_mode.h>
30 #include <drm/drm_mode_object.h>
31
32 struct drm_encoder;
33
34 /**
35  * struct drm_encoder_funcs - encoder controls
36  *
37  * Encoders sit between CRTCs and connectors.
38  */
39 struct drm_encoder_funcs {
40         /**
41          * @reset:
42          *
43          * Reset encoder hardware and software state to off. This function isn't
44          * called by the core directly, only through drm_mode_config_reset().
45          * It's not a helper hook only for historical reasons.
46          */
47         void (*reset)(struct drm_encoder *encoder);
48
49         /**
50          * @destroy:
51          *
52          * Clean up encoder resources. This is only called at driver unload time
53          * through drm_mode_config_cleanup() since an encoder cannot be
54          * hotplugged in DRM.
55          */
56         void (*destroy)(struct drm_encoder *encoder);
57
58         /**
59          * @late_register:
60          *
61          * This optional hook can be used to register additional userspace
62          * interfaces attached to the encoder like debugfs interfaces.
63          * It is called late in the driver load sequence from drm_dev_register().
64          * Everything added from this callback should be unregistered in
65          * the early_unregister callback.
66          *
67          * Returns:
68          *
69          * 0 on success, or a negative error code on failure.
70          */
71         int (*late_register)(struct drm_encoder *encoder);
72
73         /**
74          * @early_unregister:
75          *
76          * This optional hook should be used to unregister the additional
77          * userspace interfaces attached to the encoder from
78          * @late_register. It is called from drm_dev_unregister(),
79          * early in the driver unload sequence to disable userspace access
80          * before data structures are torndown.
81          */
82         void (*early_unregister)(struct drm_encoder *encoder);
83 };
84
85 /**
86  * struct drm_encoder - central DRM encoder structure
87  * @dev: parent DRM device
88  * @head: list management
89  * @base: base KMS object
90  * @name: human readable name, can be overwritten by the driver
91  * @crtc: currently bound CRTC
92  * @bridge: bridge associated to the encoder
93  * @funcs: control functions
94  * @helper_private: mid-layer private data
95  *
96  * CRTCs drive pixels to encoders, which convert them into signals
97  * appropriate for a given connector or set of connectors.
98  */
99 struct drm_encoder {
100         struct drm_device *dev;
101         struct list_head head;
102
103         struct drm_mode_object base;
104         char *name;
105         /**
106          * @encoder_type:
107          *
108          * One of the DRM_MODE_ENCODER_<foo> types in drm_mode.h. The following
109          * encoder types are defined thus far:
110          *
111          * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A.
112          *
113          * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort.
114          *
115          * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel
116          *   with a proprietary parallel connector.
117          *
118          * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video,
119          *   Component, SCART).
120          *
121          * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays
122          *
123          * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus.
124          *
125          * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel
126          *   bus.
127          *
128          * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow
129          *   mutliple DP MST streams to share one physical encoder.
130          */
131         int encoder_type;
132
133         /**
134          * @index: Position inside the mode_config.list, can be used as an array
135          * index. It is invariant over the lifetime of the encoder.
136          */
137         unsigned index;
138
139         /**
140          * @possible_crtcs: Bitmask of potential CRTC bindings, using
141          * drm_crtc_index() as the index into the bitfield. The driver must set
142          * the bits for all &drm_crtc objects this encoder can be connected to
143          * before calling drm_encoder_init().
144          *
145          * In reality almost every driver gets this wrong.
146          *
147          * Note that since CRTC objects can't be hotplugged the assigned indices
148          * are stable and hence known before registering all objects.
149          */
150         uint32_t possible_crtcs;
151
152         /**
153          * @possible_clones: Bitmask of potential sibling encoders for cloning,
154          * using drm_encoder_index() as the index into the bitfield. The driver
155          * must set the bits for all &drm_encoder objects which can clone a
156          * &drm_crtc together with this encoder before calling
157          * drm_encoder_init(). Drivers should set the bit representing the
158          * encoder itself, too. Cloning bits should be set such that when two
159          * encoders can be used in a cloned configuration, they both should have
160          * each another bits set.
161          *
162          * In reality almost every driver gets this wrong.
163          *
164          * Note that since encoder objects can't be hotplugged the assigned indices
165          * are stable and hence known before registering all objects.
166          */
167         uint32_t possible_clones;
168
169         struct drm_crtc *crtc;
170         struct drm_bridge *bridge;
171         const struct drm_encoder_funcs *funcs;
172         const struct drm_encoder_helper_funcs *helper_private;
173 };
174
175 #define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
176
177 __printf(5, 6)
178 int drm_encoder_init(struct drm_device *dev,
179                      struct drm_encoder *encoder,
180                      const struct drm_encoder_funcs *funcs,
181                      int encoder_type, const char *name, ...);
182
183 /**
184  * drm_encoder_index - find the index of a registered encoder
185  * @encoder: encoder to find index for
186  *
187  * Given a registered encoder, return the index of that encoder within a DRM
188  * device's list of encoders.
189  */
190 static inline unsigned int drm_encoder_index(struct drm_encoder *encoder)
191 {
192         return encoder->index;
193 }
194
195 /**
196  * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
197  * @encoder: encoder to test
198  * @crtc: crtc to test
199  *
200  * Returns false if @encoder can't be driven by @crtc, true otherwise.
201  */
202 static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
203                                        struct drm_crtc *crtc)
204 {
205         return !!(encoder->possible_crtcs & drm_crtc_mask(crtc));
206 }
207
208 /**
209  * drm_encoder_find - find a &drm_encoder
210  * @dev: DRM device
211  * @id: encoder id
212  *
213  * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around
214  * drm_mode_object_find().
215  */
216 static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev,
217                                                    uint32_t id)
218 {
219         struct drm_mode_object *mo;
220
221         mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
222
223         return mo ? obj_to_encoder(mo) : NULL;
224 }
225
226 void drm_encoder_cleanup(struct drm_encoder *encoder);
227
228 /**
229  * drm_for_each_encoder_mask - iterate over encoders specified by bitmask
230  * @encoder: the loop cursor
231  * @dev: the DRM device
232  * @encoder_mask: bitmask of encoder indices
233  *
234  * Iterate over all encoders specified by bitmask.
235  */
236 #define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \
237         list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \
238                 for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder)))
239
240 /**
241  * drm_for_each_encoder - iterate over all encoders
242  * @encoder: the loop cursor
243  * @dev: the DRM device
244  *
245  * Iterate over all encoders of @dev.
246  */
247 #define drm_for_each_encoder(encoder, dev) \
248         list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head)
249
250 #endif