Merge master.kernel.org:/pub/scm/linux/kernel/git/acme/net-2.6
[sfrench/cifs-2.6.git] / drivers / video / i810 / i810_main.h
1 /*-*- linux-c -*-
2  *  linux/drivers/video/i810fb_main.h -- Intel 810 frame buffer device 
3  *                                       main header file
4  *
5  *      Copyright (C) 2001 Antonino Daplas<adaplas@pol.net>
6  *      All Rights Reserved      
7  *
8  *
9  *  This file is subject to the terms and conditions of the GNU General Public
10  *  License. See the file COPYING in the main directory of this archive for
11  *  more details.
12  */
13
14 #ifndef __I810_MAIN_H__
15 #define __I810_MAIN_H__
16
17 static int  __devinit i810fb_init_pci (struct pci_dev *dev, 
18                                        const struct pci_device_id *entry);
19 static void __exit i810fb_remove_pci(struct pci_dev *dev);
20 static int i810fb_resume(struct pci_dev *dev);
21 static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
22
23 /*
24  * voffset - framebuffer offset in MiB from aperture start address.  In order for
25  * the driver to work with X, we must try to use memory holes left untouched by X. The 
26  * following table lists where X's different surfaces start at.  
27  * 
28  * ---------------------------------------------
29  * :                :  64 MiB     : 32 MiB      :
30  * ----------------------------------------------
31  * : FrontBuffer    :   0         :  0          :
32  * : DepthBuffer    :   48        :  16         :
33  * : BackBuffer     :   56        :  24         :
34  * ----------------------------------------------
35  *
36  * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
37  * 15 + 1 MiB of Framebuffer memory.  For 32 MiB Aperture sizes, a v_offset of 8 MiB should
38  * work, allowing 7 + 1 MiB of Framebuffer memory.
39  * Note, the size of the hole may change depending on how much memory you allocate to X,
40  * and how the memory is split up between these surfaces.  
41  *
42  * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
43  * DRI disabled.  But if the Frontbuffer is overlapped, X will fail to load.
44  * 
45  * Experiment with v_offset to find out which works best for you.
46  */
47 static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
48 static u32 voffset          __initdata = 0;
49
50 static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
51
52 /* Chipset Specific Functions */
53 static int i810fb_set_par    (struct fb_info *info);
54 static int i810fb_getcolreg  (u8 regno, u8 *red, u8 *green, u8 *blue,
55                               u8 *transp, struct fb_info *info);
56 static int i810fb_setcolreg  (unsigned regno, unsigned red, unsigned green, unsigned blue,
57                               unsigned transp, struct fb_info *info);
58 static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
59 static int i810fb_blank      (int blank_mode, struct fb_info *info);
60
61 /* Initialization */
62 static void i810fb_release_resource       (struct fb_info *info, struct i810fb_par *par);
63 extern int __init agp_intel_init(void);
64
65
66 /* Video Timings */
67 extern void round_off_xres         (u32 *xres);
68 extern void round_off_yres         (u32 *xres, u32 *yres);
69 extern u32 i810_get_watermark      (const struct fb_var_screeninfo *var,
70                                     struct i810fb_par *par);
71 extern void i810fb_encode_registers(const struct fb_var_screeninfo *var,
72                                     struct i810fb_par *par, u32 xres, u32 yres);
73 extern void i810fb_fill_var_timings(struct fb_var_screeninfo *var);
74                                     
75 /* Accelerated Functions */
76 extern void i810fb_fillrect (struct fb_info *p, 
77                              const struct fb_fillrect *rect);
78 extern void i810fb_copyarea (struct fb_info *p, 
79                              const struct fb_copyarea *region);
80 extern void i810fb_imageblit(struct fb_info *p, const struct fb_image *image);
81 extern int  i810fb_sync     (struct fb_info *p);
82
83 extern void i810fb_init_ringbuffer(struct fb_info *info);
84 extern void i810fb_load_front     (u32 offset, struct fb_info *info);
85
86 #ifdef CONFIG_FB_I810_I2C
87 /* I2C */
88 extern int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
89                                     int conn);
90 extern void i810_create_i2c_busses(struct i810fb_par *par);
91 extern void i810_delete_i2c_busses(struct i810fb_par *par);
92 #else
93 static inline int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
94                                     int conn)
95 {
96         return 1;
97 }
98 static inline void i810_create_i2c_busses(struct i810fb_par *par) { }
99 static inline void i810_delete_i2c_busses(struct i810fb_par *par) { }
100 #endif
101
102 /* Conditionals */
103 #ifdef CONFIG_X86
104 inline void flush_cache(void)
105 {
106         asm volatile ("wbinvd":::"memory");
107 }
108 #else
109 #define flush_cache() do { } while(0)
110 #endif 
111
112 #ifdef CONFIG_MTRR
113 #define KERNEL_HAS_MTRR 1
114 static inline void __devinit set_mtrr(struct i810fb_par *par)
115 {
116         par->mtrr_reg = mtrr_add((u32) par->aperture.physical, 
117                  par->aperture.size, MTRR_TYPE_WRCOMB, 1);
118         if (par->mtrr_reg < 0) {
119                 printk(KERN_ERR "set_mtrr: unable to set MTRR\n");
120                 return;
121         }
122         par->dev_flags |= HAS_MTRR;
123 }
124 static inline void unset_mtrr(struct i810fb_par *par)
125 {
126         if (par->dev_flags & HAS_MTRR) 
127                 mtrr_del(par->mtrr_reg, (u32) par->aperture.physical, 
128                          par->aperture.size); 
129 }
130 #else
131 #define KERNEL_HAS_MTRR 0
132 #define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")
133
134 #define unset_mtrr(x) do { } while (0)
135 #endif /* CONFIG_MTRR */
136
137 #ifdef CONFIG_FB_I810_GTF
138 #define IS_DVT (0)
139 #else
140 #define IS_DVT (1)
141 #endif
142
143 #endif /* __I810_MAIN_H__ */