drivers/usb/storage/unusual_devs.h

   1 /* Driver for USB Mass Storage compliant devices
   2  * Unusual Devices File
   3  *
   4  * Current development and maintenance by:
   5  *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   6  *
   7  * Initial work by:
   8  *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
   9  *
  10  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  11  * information about this driver.
  12  *
  13  * This program is free software; you can redistribute it and/or modify it
  14  * under the terms of the GNU General Public License as published by the
  15  * Free Software Foundation; either version 2, or (at your option) any
  16  * later version.
  17  *
  18  * This program is distributed in the hope that it will be useful, but
  19  * WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  21  * General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License along
  24  * with this program; if not, write to the Free Software Foundation, Inc.,
  25  * 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 /* IMPORTANT NOTE: This file must be included in another file which does
  29  * the following thing for it to work:
  30  * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
  31  * before this file is included.
  32  */
  33
  34 /* If you edit this file, please try to keep it sorted first by VendorID,
  35  * then by ProductID.
  36  *
  37  * If you want to add an entry for this file, be sure to include the
  38  * following information:
  39  *      - a patch that adds the entry for your device, including your
  40  *        email address right above the entry (plus maybe a brief
  41  *        explanation of the reason for the entry),
  42  *      - a copy of /proc/bus/usb/devices with your device plugged in
  43  *        running with this patch.
  44  * Send your submission to either Phil Dibowitz <phil@ipom.com> or
  45  * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
  46  * USB development list <linux-usb@vger.kernel.org> and the USB storage list
  47  * <usb-storage@lists.one-eyed-alien.net>
  48  */
  49
  50 /* Note: If you add an entry only in order to set the CAPACITY_OK flag,
  51  * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV.  This is
  52  * because such entries mark devices which actually work correctly,
  53  * as opposed to devices that do something strangely or wrongly.
  54  */
  55
  56 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \
  57                 !defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
  58 #define NO_SDDR09
  59 #endif
  60
  61 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
  62  */
  63 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
  64                 "ATMEL",
  65                 "SND1 Storage",
  66                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  67                 US_FL_IGNORE_RESIDUE),
  68
  69 /* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
  70 UNUSUAL_DEV(  0x03ee, 0x6901, 0x0000, 0x0200,
  71                 "Mitsumi",
  72                 "USB FDD",
  73                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  74                 US_FL_SINGLE_LUN ),
  75
  76 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */
  77 UNUSUAL_DEV(  0x03ee, 0x6906, 0x0003, 0x0003,
  78                 "VIA Technologies Inc.",
  79                 "Mitsumi multi cardreader",
  80                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  81                 US_FL_IGNORE_RESIDUE ),
  82
  83 UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
  84                 "HP",
  85                 "CD-Writer+",
  86                 US_SC_8070, US_PR_CB, NULL, 0),
  87
  88 /* Reported by Ben Efros <ben@pc-doctor.com> */
  89 UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
  90                 "HP",
  91                 "Personal Media Drive",
  92                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  93                 US_FL_SANE_SENSE ),
  94
  95 /* Reported by Grant Grundler <grundler@parisc-linux.org>
  96  * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
  97  */
  98 UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
  99                 "HP",
 100                 "PhotoSmart R707",
 101                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
 102
 103 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
 104  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
 105  * for USB floppies that need the SINGLE_LUN enforcement.
 106  */
 107 UNUSUAL_DEV(  0x0409, 0x0040, 0x0000, 0x9999,
 108                 "NEC",
 109                 "NEC USB UF000x",
 110                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 111                 US_FL_SINGLE_LUN ),
 112
 113 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
 114 UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 115                 "VIA Technologies Inc.",
 116                 "USB 2.0 Card Reader",
 117                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 118                 US_FL_IGNORE_RESIDUE ),
 119
 120 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 121  * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
 122  * always fails and confuses drive.
 123  */
 124 UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
 125                 "Buffalo",
 126                 "DUB-P40G HDD",
 127                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 128                 US_FL_FIX_INQUIRY ),
 129
 130 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
 131 UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
 132                 "Samsung Info. Systems America, Inc.",
 133                 "MP3 Player",
 134                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 135                 US_FL_IGNORE_RESIDUE ),
 136
 137 /* Reported by Orgad Shaneh <orgads@gmail.com> */
 138 UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
 139                 "Samsung", "MP3 Player",
 140                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 141                 US_FL_IGNORE_RESIDUE ),
 142
 143 /* Reported by Christian Leber <christian@leber.de> */
 144 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
 145                 "TrekStor",
 146                 "i.Beat 115 2.0",
 147                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 148                 US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
 149
 150 /* Reported by Stefan Werner <dustbln@gmx.de> */
 151 UNUSUAL_DEV(  0x0419, 0xaaf6, 0x0100, 0x0100,
 152                 "TrekStor",
 153                 "i.Beat Joy 2.0",
 154                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 155                 US_FL_IGNORE_RESIDUE ),
 156
 157 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
 158 UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 159                 "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
 160                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 161                 US_FL_IGNORE_RESIDUE ),
 162
 163 /* Reported by Andrew Nayenko <relan@bk.ru> */
 164 UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
 165                 "Nokia",
 166                 "Nokia 6288",
 167                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 168                 US_FL_MAX_SECTORS_64 ),
 169
 170 /* Reported by Mario Rettig <mariorettig@web.de> */
 171 UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
 172                 "Nokia",
 173                 "Nokia 3250",
 174                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 175                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 176
 177 /* Reported by <honkkis@gmail.com> */
 178 UNUSUAL_DEV(  0x0421, 0x0433, 0x0100, 0x0100,
 179                 "Nokia",
 180                 "E70",
 181                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 182                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 183
 184 /* Reported by Jon Hart <Jon.Hart@web.de> */
 185 UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
 186                 "Nokia",
 187                 "E60",
 188                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 189                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 190
 191 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
 192  * Einar Th. Einarsson <einarthered@gmail.com> */
 193 UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
 194                 "Nokia",
 195                 "N91",
 196                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 197                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 198
 199 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
 200  * Rene C. Castberg <Rene@Castberg.org> */
 201 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 202                 "Nokia",
 203                 "N80",
 204                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 205                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 206
 207 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
 208 UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
 209                 "Nokia",
 210                 "E61",
 211                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 212                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 213
 214 /* Reported by Bardur Arantsson <bardur@scientician.net> */
 215 UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
 216                 "Nokia",
 217                 "6131",
 218                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 219                 US_FL_MAX_SECTORS_64 ),
 220
 221 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
 222 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
 223                 "Nokia",
 224                 "Nokia 6233",
 225                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 226                 US_FL_MAX_SECTORS_64 ),
 227
 228 /* Reported by Alex Corcoles <alex@corcoles.net> */
 229 UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 230                 "Nokia",
 231                 "6234",
 232                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 233                 US_FL_MAX_SECTORS_64 ),
 234
 235 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 236 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 237                 "SMSC",
 238                 "FDC GOLD-2.30",
 239                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 240                 US_FL_SINGLE_LUN ),
 241
 242 #ifdef NO_SDDR09
 243 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 244                 "Microtech",
 245                 "CameraMate",
 246                 US_SC_SCSI, US_PR_CB, NULL,
 247                 US_FL_SINGLE_LUN ),
 248 #endif
 249
 250 /* Patch submitted by Daniel Drake <dsd@gentoo.org>
 251  * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
 252 UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 253                 "Neuros Audio",
 254                 "USB 2.0 HD 2.5",
 255                 US_SC_DEVICE, US_PR_BULK, NULL,
 256                 US_FL_NEED_OVERRIDE ),
 257
 258 /*
 259  * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
 260  * The key does not actually break, but it returns zero sense which
 261  * makes our SCSI stack to print confusing messages.
 262  */
 263 UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 264                 "USBest Technology",    /* sold by Transcend */
 265                 "USB Mass Storage Device",
 266                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 267
 268 /*
 269 * Bohdan Linda <bohdan.linda@gmail.com>
 270 * 1GB USB sticks MyFlash High Speed. I have restricted
 271 * the revision to my model only
 272 */
 273 UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 274                 "USB 2.0",
 275                 "Flash Disk",
 276                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 277                 US_FL_NOT_LOCKABLE ),
 278
 279 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
 280  * Obviously the PROM has not been customized by the VAR;
 281  * the Vendor and Product string descriptors are:
 282  *      Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
 283  *      Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
 284  */
 285 UNUSUAL_DEV(  0x045e, 0xffff, 0x0000, 0x0000,
 286                 "Mitac",
 287                 "GPS",
 288                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 289                 US_FL_MAX_SECTORS_64 ),
 290
 291 /*
 292  * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
 293  * Reported by Pete Zaitcev <zaitcev@redhat.com>
 294  * This device chokes on both version of MODE SENSE which we have, so
 295  * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
 296  */
 297 UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
 298                 "AMI",
 299                 "Virtual Floppy",
 300                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 301                 US_FL_NO_WP_DETECT),
 302
 303 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 304 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 305                 "Kyocera",
 306                 "Finecam S3x",
 307                 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 308
 309 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 310 UNUSUAL_DEV(  0x0482, 0x0101, 0x0100, 0x0100,
 311                 "Kyocera",
 312                 "Finecam S4",
 313                 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 314
 315 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
 316 UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
 317                 "Kyocera",
 318                 "Finecam S5",
 319                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 320
 321 /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
 322 UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
 323                 "Kyocera",
 324                 "CONTAX SL300R T*",
 325                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 326                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
 327
 328 /* Reported by Paul Stewart <stewart@wetlogic.net>
 329  * This entry is needed because the device reports Sub=ff */
 330 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 331                 "Hitachi",
 332                 "DVD-CAM DZ-MV100A Camcorder",
 333                 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
 334
 335 /* BENQ DC5330
 336  * Reported by Manuel Fombuena <mfombuena@ya.com> and
 337  * Frank Copeland <fjc@thingy.apana.org.au> */
 338 UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 339                 "Tekom Technologies, Inc",
 340                 "300_CAMERA",
 341                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 342                 US_FL_IGNORE_RESIDUE ),
 343
 344 /* Patch for Nikon coolpix 2000
 345  * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
 346 UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
 347                 "NIKON",
 348                 "NIKON DSC E2000",
 349                 US_SC_DEVICE, US_PR_DEVICE,NULL,
 350                 US_FL_NOT_LOCKABLE ),
 351
 352 /* Reported by Doug Maxey (dwm@austin.ibm.com) */
 353 UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 354                 "IBM",
 355                 "IBM RSA2",
 356                 US_SC_DEVICE, US_PR_CB, NULL,
 357                 US_FL_MAX_SECTORS_MIN),
 358
 359 /* Reported by Simon Levitt <simon@whattf.com>
 360  * This entry needs Sub and Proto fields */
 361 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
 362                 "Epson",
 363                 "875DC Storage",
 364                 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 365
 366 /* Reported by Khalid Aziz <khalid@gonehiking.org>
 367  * This entry is needed because the device reports Sub=ff */
 368 UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 369                 "Epson",
 370                 "785EPX Storage",
 371                 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
 372
 373 /* Not sure who reported this originally but
 374  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
 375  * flag be added */
 376 UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 377                 "Fujifilm",
 378                 "FinePix 1400Zoom",
 379                 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 380
 381 /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
 382  * The device needs the flags only.
 383  */
 384 UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
 385                 "ScanLogic",
 386                 "SL11R-IDE",
 387                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 388                 US_FL_FIX_INQUIRY),
 389
 390 /* Reported by Kriston Fincher <kriston@airmail.net>
 391  * Patch submitted by Sean Millichamp <sean@bruenor.org>
 392  * This is to support the Panasonic PalmCam PV-SD4090
 393  * This entry is needed because the device reports Sub=ff
 394  */
 395 UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
 396                 "Panasonic",
 397                 "LS-120 Camera",
 398                 US_SC_UFI, US_PR_DEVICE, NULL, 0),
 399
 400 /* From Yukihiro Nakai, via zaitcev@yahoo.com.
 401  * This is needed for CB instead of CBI */
 402 UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
 403                 "Sharp CE-CW05",
 404                 "CD-R/RW Drive",
 405                 US_SC_8070, US_PR_CB, NULL, 0),
 406
 407 /* Reported by Adriaan Penning <a.penning@luon.net> */
 408 UNUSUAL_DEV(  0x04da, 0x2372, 0x0000, 0x9999,
 409                 "Panasonic",
 410                 "DMC-LCx Camera",
 411                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 412                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 413
 414 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
 415 UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
 416                 "LEICA",
 417                 "D-LUX Camera",
 418                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 419                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 420
 421 /* Most of the following entries were developed with the help of
 422  * Shuttle/SCM directly.
 423  */
 424 UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
 425                 "Matshita",
 426                 "LS-120",
 427                 US_SC_8020, US_PR_CB, NULL, 0),
 428
 429 UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 430                 "Shuttle",
 431                 "eUSCSI Bridge",
 432                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 433                 US_FL_SCM_MULT_TARG ),
 434
 435 #ifdef NO_SDDR09
 436 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 437                 "SCM Microsystems",
 438                 "eUSB CompactFlash Adapter",
 439                 US_SC_SCSI, US_PR_CB, NULL,
 440                 US_FL_SINGLE_LUN),
 441 #endif
 442
 443 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
 444 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0100,
 445                 "SCM Microsystems Inc.",
 446                 "eUSB MMC Adapter",
 447                 US_SC_SCSI, US_PR_CB, NULL,
 448                 US_FL_SINGLE_LUN),
 449
 450 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
 451 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0205, 0x0205,
 452                 "Shuttle",
 453                 "eUSB MMC Adapter",
 454                 US_SC_SCSI, US_PR_DEVICE, NULL,
 455                 US_FL_SINGLE_LUN),
 456
 457 UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200,
 458                 "Sony",
 459                 "Hifd",
 460                 US_SC_SCSI, US_PR_CB, NULL,
 461                 US_FL_SINGLE_LUN),
 462
 463 UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200,
 464                 "Shuttle",
 465                 "eUSB ATA/ATAPI Adapter",
 466                 US_SC_8020, US_PR_CB, NULL, 0),
 467
 468 UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
 469                 "Shuttle",
 470                 "eUSB CompactFlash Adapter",
 471                 US_SC_8020, US_PR_CB, NULL, 0),
 472
 473 UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
 474                 "Shuttle",
 475                 "eUSCSI Bridge",
 476                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 477                 US_FL_SCM_MULT_TARG ),
 478
 479 UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
 480                 "Shuttle",
 481                 "eUSCSI Bridge",
 482                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 483                 US_FL_SCM_MULT_TARG ),
 484
 485 UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 486                 "Shuttle",
 487                 "CD-RW Device",
 488                 US_SC_8020, US_PR_CB, NULL, 0),
 489
 490 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
 491 UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 492                 "Samsung",
 493                 "YP-U3",
 494                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 495                 US_FL_MAX_SECTORS_64),
 496
 497 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
 498  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
 499  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
 500  */
 501 UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
 502                 "Kobian Mercury",
 503                 "Binocam DCB-132",
 504                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 505                 US_FL_BULK32),
 506
 507 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
 508 UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 509                 "Belkin",
 510                 "USB SCSI Adaptor",
 511                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 512                 US_FL_SCM_MULT_TARG ),
 513
 514 /* Iomega Clik! Drive
 515  * Reported by David Chatenay <dchatenay@hotmail.com>
 516  * The reason this is needed is not fully known.
 517  */
 518 UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
 519                 "Iomega",
 520                 "USB Clik! 40",
 521                 US_SC_8070, US_PR_DEVICE, NULL,
 522                 US_FL_FIX_INQUIRY ),
 523
 524 /* Added by Alan Stern <stern@rowland.harvard.edu> */
 525 COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
 526                 "Linux",
 527                 "File-backed Storage Gadget",
 528                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 529                 US_FL_CAPACITY_OK ),
 530
 531 /* Yakumo Mega Image 37
 532  * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
 533 UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 534                 "Tekom Technologies, Inc",
 535                 "300_CAMERA",
 536                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 537                 US_FL_IGNORE_RESIDUE ),
 538
 539 /* Another Yakumo camera.
 540  * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
 541 UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
 542                 "Tekom Technologies, Inc",
 543                 "300_CAMERA",
 544                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 545                 US_FL_IGNORE_RESIDUE ),
 546
 547 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
 548 UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 549                 "Tekom Technologies, Inc",
 550                 "300_CAMERA",
 551                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 552                 US_FL_IGNORE_RESIDUE ),
 553
 554 /* Yakumo Mega Image 47
 555  * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
 556 UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 557                 "Tekom Technologies, Inc",
 558                 "400_CAMERA",
 559                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 560                 US_FL_IGNORE_RESIDUE ),
 561
 562 /* Reported by Paul Ortyl <ortylp@3miasto.net>
 563  * Note that it's similar to the device above, only different prodID */
 564 UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
 565                 "Tekom Technologies, Inc",
 566                 "400_CAMERA",
 567                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 568                 US_FL_IGNORE_RESIDUE ),
 569
 570 UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 571                 "Sony",
 572                 "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
 573                 US_SC_SCSI, US_PR_DEVICE, NULL,
 574                 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 575
 576 /* Submitted by Lars Jacob <jacob.lars@googlemail.com>
 577  * This entry is needed because the device reports Sub=ff */
 578 UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 579                 "Sony",
 580                 "DSC-T1/T5/H5",
 581                 US_SC_8070, US_PR_DEVICE, NULL,
 582                 US_FL_SINGLE_LUN ),
 583
 584
 585 /* Reported by wim@geeks.nl */
 586 UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
 587                 "Sony",
 588                 "Memorystick NW-MS7",
 589                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 590                 US_FL_SINGLE_LUN ),
 591
 592 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
 593 UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
 594                 "Sony",
 595                 "USB Floppy Drive",
 596                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 597                 US_FL_SINGLE_LUN ),
 598
 599 UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100,
 600                 "Sony",
 601                 "Memorystick MSAC-US1",
 602                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 603                 US_FL_SINGLE_LUN ),
 604
 605 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
 606 UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310,
 607                 "Sony",
 608                 "Handycam",
 609                 US_SC_SCSI, US_PR_DEVICE, NULL,
 610                 US_FL_SINGLE_LUN ),
 611
 612 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
 613 UNUSUAL_DEV(  0x054c, 0x002e, 0x0500, 0x0500,
 614                 "Sony",
 615                 "Handycam HC-85",
 616                 US_SC_UFI, US_PR_DEVICE, NULL,
 617                 US_FL_SINGLE_LUN ),
 618
 619 UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
 620                 "Sony",
 621                 "Memorystick MSC-U01N",
 622                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 623                 US_FL_SINGLE_LUN ),
 624
 625 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */
 626 UNUSUAL_DEV(  0x054c, 0x0058, 0x0000, 0x9999,
 627                 "Sony",
 628                 "PEG N760c Memorystick",
 629                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 630                 US_FL_FIX_INQUIRY ),
 631
 632 UNUSUAL_DEV(  0x054c, 0x0069, 0x0000, 0x9999,
 633                 "Sony",
 634                 "Memorystick MSC-U03",
 635                 US_SC_UFI, US_PR_CB, NULL,
 636                 US_FL_SINGLE_LUN ),
 637
 638 /* Submitted by Nathan Babb <nathan@lexi.com> */
 639 UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
 640                 "Sony",
 641                 "PEG Mass Storage",
 642                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 643                 US_FL_FIX_INQUIRY ),
 644
 645 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
 646 UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
 647                 "Sony",
 648                 "PEG Mass Storage",
 649                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 650                 US_FL_FIX_INQUIRY ),
 651
 652 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
 653 UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
 654                 "Sony",
 655                 "PEG Mass Storage",
 656                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 657                 US_FL_FIX_INQUIRY ),
 658
 659 /* floppy reports multiple luns */
 660 UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
 661                 "SAMSUNG",
 662                 "SFD-321U [FW 0C]",
 663                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 664                 US_FL_SINGLE_LUN ),
 665
 666
 667 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 668                 "Y-E Data",
 669                 "Flashbuster-U",
 670                 US_SC_DEVICE,  US_PR_CB, NULL,
 671                 US_FL_SINGLE_LUN),
 672
 673 UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999,
 674                 "Y-E Data",
 675                 "Flashbuster-U",
 676                 US_SC_DEVICE,  US_PR_DEVICE, NULL,
 677                 US_FL_SINGLE_LUN),
 678
 679 /* Reported by Johann Cardon <johann.cardon@free.fr>
 680  * This entry is needed only because the device reports
 681  * bInterfaceClass = 0xff (vendor-specific)
 682  */
 683 UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
 684                 "Y-E Data",
 685                 "Silicon Media R/W",
 686                 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
 687
 688 /* Reported by RTE <raszilki@yandex.ru> */
 689 UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
 690                 "JetFlash",
 691                 "TS1GJF2A/120",
 692                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 693                 US_FL_MAX_SECTORS_64 ),
 694
 695 /* Fabrizio Fellini <fello@libero.it> */
 696 UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 697                 "Fujifilm",
 698                 "Digital Camera EX-20 DSC",
 699                 US_SC_8070, US_PR_DEVICE, NULL, 0 ),
 700
 701 /* Reported by Andre Welter <a.r.welter@gmx.de>
 702  * This antique device predates the release of the Bulk-only Transport
 703  * spec, and if it gets a Get-Max-LUN then it requires the host to do a
 704  * Clear-Halt on the bulk endpoints.  The SINGLE_LUN flag will prevent
 705  * us from sending the request.
 706  */
 707 UNUSUAL_DEV(  0x059b, 0x0001, 0x0100, 0x0100,
 708                 "Iomega",
 709                 "ZIP 100",
 710                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 711                 US_FL_SINGLE_LUN ),
 712
 713 /* Reported by <Hendryk.Pfeiffer@gmx.de> */
 714 UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
 715                 "LaCie",
 716                 "DVD+-RW",
 717                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 718                 US_FL_GO_SLOW ),
 719
 720 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
 721  * Some versions of this device need the SubClass and Protocol overrides
 722  * while others don't.
 723  */
 724 UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 725                 "In-System",
 726                 "PyroGate External CD-ROM Enclosure (FCD-523)",
 727                 US_SC_SCSI, US_PR_BULK, NULL,
 728                 US_FL_NEED_OVERRIDE ),
 729
 730 /* Submitted by Sven Anderson <sven-linux@anderson.de>
 731  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
 732  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
 733  * to change with firmware updates, I changed the range to maximum for all
 734  * iPod entries.
 735  */
 736 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
 737                 "Apple",
 738                 "iPod",
 739                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 740                 US_FL_FIX_CAPACITY ),
 741
 742 /* Reported by Avi Kivity <avi@argo.co.il> */
 743 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
 744                 "Apple",
 745                 "iPod",
 746                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 747                 US_FL_FIX_CAPACITY ),
 748
 749 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
 750                 "Apple",
 751                 "iPod",
 752                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 753                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 754
 755 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
 756                 "Apple",
 757                 "iPod",
 758                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 759                 US_FL_FIX_CAPACITY ),
 760
 761 /*
 762  * Reported by Tyson Vinson <lornoss@gmail.com>
 763  * This particular productId is the iPod Nano
 764  */
 765 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
 766                 "Apple",
 767                 "iPod",
 768                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 769                 US_FL_FIX_CAPACITY ),
 770
 771 /* Reported by Dan Williams <dcbw@redhat.com>
 772  * Option N.V. mobile broadband modems
 773  * Ignore driver CD mode and force into modem mode by default.
 774  */
 775
 776 /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
 777 UNUSUAL_DEV(  0x05c6, 0x1000, 0x0000, 0x9999,
 778                 "Option N.V.",
 779                 "Mass Storage",
 780                 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
 781                 0),
 782
 783 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 784 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 785                 "Lexar",
 786                 "USB CF Reader",
 787                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 788                 US_FL_FIX_INQUIRY ),
 789
 790 /* The following two entries are for a Genesys USB to IDE
 791  * converter chip, but it changes its ProductId depending
 792  * on whether or not a disk or an optical device is enclosed
 793  * They were originally reported by Alexander Oltu
 794  * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
 795  * respectively.
 796  *
 797  * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
 798  * <phil@ipom.com> as these flags were made and hard-coded
 799  * special-cases were pulled from scsiglue.c.
 800  */
 801 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 802                 "Genesys Logic",
 803                 "USB to IDE Optical",
 804                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 805                 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 806
 807 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 808                 "Genesys Logic",
 809                 "USB to IDE Disk",
 810                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 811                 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 812
 813 /* Reported by Ben Efros <ben@pc-doctor.com> */
 814 UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
 815                 "Genesys Logic",
 816                 "USB to SATA",
 817                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 818                 US_FL_SANE_SENSE ),
 819
 820 /* Reported by Hanno Boeck <hanno@gmx.de>
 821  * Taken from the Lycoris Kernel */
 822 UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
 823                 "Vivitar",
 824                 "Vivicam 35Xx",
 825                 US_SC_SCSI, US_PR_BULK, NULL,
 826                 US_FL_FIX_INQUIRY ),
 827
 828 UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 829                 "TEAC",
 830                 "Floppy Drive",
 831                 US_SC_UFI, US_PR_CB, NULL, 0 ),
 832
 833 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 834 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 835                 "SigmaTel",
 836                 "USBMSC Audio Player",
 837                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 838                 US_FL_FIX_CAPACITY ),
 839
 840 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
 841 /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
 842  * Thomas Bartosik <tbartdev@gmx-topmail.de> */
 843 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
 844                 "Prolific Technology Inc.",
 845                 "Mass Storage Device",
 846                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 847                 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
 848
 849 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
 850 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
 851                 "Prolific Technology Inc.",
 852                 "ATAPI-6 Bridge Controller",
 853                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 854                 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
 855
 856 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */
 857 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
 858                 "Minolta",
 859                 "Dimage F300",
 860                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 861
 862 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
 863 UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
 864                 "Minolta",
 865                 "DIMAGE E223",
 866                 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
 867
 868 UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
 869                 "Hagiwara",
 870                 "Flashgate",
 871                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 872
 873 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */
 874 UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 875                 "Thomson Multimedia Inc.",
 876                 "RCA RD1080 MP3 Player",
 877                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 878                 US_FL_FIX_CAPACITY ),
 879
 880 /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
 881 UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
 882                 "RockChip",
 883                 "MP3",
 884                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 885                 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 886
 887 /* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
 888  * Support the following product :
 889  *    "Dane-Elec MediaTouch"
 890  */
 891 UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
 892                 "RockChip",
 893                 "MTP",
 894                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 895                 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 896
 897 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
 898  * This USB MP3/AVI player device fails and disconnects if more than 128
 899  * sectors (64kB) are read/written in a single command, and may be present
 900  * at least in the following products:
 901  *   "Magnex Digital Video Panel DVP 1800"
 902  *   "MP4 AIGO 4GB SLOT SD"
 903  *   "Teclast TL-C260 MP3"
 904  *   "i.Meizu PMP MP3/MP4"
 905  *   "Speed MV8 MP4 Audio Player"
 906  */
 907 UNUSUAL_DEV(  0x071b, 0x3203, 0x0100, 0x0100,
 908                 "RockChip",
 909                 "ROCK MP3",
 910                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 911                 US_FL_MAX_SECTORS_64),
 912
 913 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */
 914 UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
 915                 "ATMEL",
 916                 "SND1 Storage",
 917                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 918                 US_FL_IGNORE_RESIDUE),
 919
 920 /* Submitted by Roman Hodek <roman@hodek.net> */
 921 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
 922                 "Sandisk",
 923                 "ImageMate SDDR-05a",
 924                 US_SC_SCSI, US_PR_CB, NULL,
 925                 US_FL_SINGLE_LUN ),
 926
 927 UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
 928                 "SanDisk Corporation",
 929                 "ImageMate CompactFlash USB",
 930                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 931                 US_FL_FIX_CAPACITY ),
 932
 933 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
 934                 "Sandisk",
 935                 "ImageMate SDDR-12",
 936                 US_SC_SCSI, US_PR_CB, NULL,
 937                 US_FL_SINGLE_LUN ),
 938
 939 /* Reported by Eero Volotinen <eero@ping-viini.org> */
 940 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
 941                 "Freecom Technologies",
 942                 "FHD-Classic",
 943                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 944                 US_FL_FIX_CAPACITY),
 945
 946 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 947                 "Microtech",
 948                 "USB-SCSI-DB25",
 949                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 950                 US_FL_SCM_MULT_TARG ),
 951
 952 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
 953                 "Microtech",
 954                 "USB-SCSI-HD50",
 955                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 956                 US_FL_SCM_MULT_TARG ),
 957
 958 #ifdef NO_SDDR09
 959 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 960                 "Microtech",
 961                 "CameraMate",
 962                 US_SC_SCSI, US_PR_CB, NULL,
 963                 US_FL_SINGLE_LUN ),
 964 #endif
 965
 966 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
 967  * Only revision 1.13 tested (same for all of the above devices,
 968  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
 969  * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
 970  * See also http://martin.wilck.bei.t-online.de/#kecf .
 971  */
 972 UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 973                 "Datafab",
 974                 "KECF-USB",
 975                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 976                 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 977
 978 /* Reported by Rauch Wolke <rauchwolke@gmx.net> */
 979 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 980                 "Simple Tech/Datafab",
 981                 "CF+SM Reader",
 982                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 983                 US_FL_IGNORE_RESIDUE ),
 984
 985 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
 986  * to the USB storage specification in two ways:
 987  * - They tell us they are using transport protocol CBI. In reality they
 988  *   are using transport protocol CB.
 989  * - They don't like the INQUIRY command. So we must handle this command
 990  *   of the SCSI layer ourselves.
 991  * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
 992  *   bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
 993  *   So don't remove the US_PR_CB override!
 994  * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
 995  */
 996 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
 997                 "Casio",
 998                 "QV DigitalCamera",
 999                 US_SC_8070, US_PR_CB, NULL,
1000                 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
1001
1002 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
1003 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
1004                 "Samsung",
1005                 "Digimax 410",
1006                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1007                 US_FL_FIX_INQUIRY),
1008
1009 /* Reported by Luciano Rocha <luciano@eurotux.com> */
1010 UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
1011                 "Argosy",
1012                 "Storage",
1013                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1014                 US_FL_FIX_CAPACITY),
1015
1016 /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
1017 UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
1018                 "Argosy",
1019                 "Storage",
1020                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1021                 US_FL_FIX_CAPACITY),
1022
1023 /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
1024 UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
1025                 "Argosy",
1026                 "Storage",
1027                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1028                 US_FL_FIX_CAPACITY),
1029
1030 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
1031  * Flag will support Bulk devices which use a standards-violating 32-byte
1032  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
1033  * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
1034  */
1035
1036 UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
1037                 "Grandtech",
1038                 "DC2MEGA",
1039                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1040                 US_FL_BULK32),
1041
1042 /* Andrew Lunn <andrew@lunn.ch>
1043  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
1044  * on LUN 4.
1045  * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
1046 */
1047 UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
1048                 "PanDigital",
1049                 "Photo Frame",
1050                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1051                 US_FL_NOT_LOCKABLE),
1052
1053 /* Submitted by Jan De Luyck <lkml@kcore.org> */
1054 UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
1055                 "CITIZEN",
1056                 "X1DE-USB",
1057                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1058                 US_FL_SINGLE_LUN),
1059
1060 /* Submitted by Dylan Taft <d13f00l@gmail.com>
1061  * US_FL_IGNORE_RESIDUE Needed
1062  */
1063 UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
1064                 "AIPTEK",
1065                 "Aiptek USB Keychain MP3 Player",
1066                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1067                 US_FL_IGNORE_RESIDUE),
1068
1069 /* Entry needed for flags. Moreover, all devices with this ID use
1070  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
1071  * One example is "Trumpion Digital Research MYMP3".
1072  * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
1073  */
1074 UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
1075                 "Trumpion",
1076                 "t33520 USB Flash Card Controller",
1077                 US_SC_DEVICE, US_PR_BULK, NULL,
1078                 US_FL_NEED_OVERRIDE ),
1079
1080 /* Reported by Filippo Bardelli <filibard@libero.it>
1081  * The device reports a subclass of RBC, which is wrong.
1082  */
1083 UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
1084                 "Trumpion Microelectronics, Inc.",
1085                 "33520 USB Digital Voice Recorder",
1086                 US_SC_UFI, US_PR_DEVICE, NULL,
1087                 0),
1088
1089 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
1090 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
1091                 "Trumpion",
1092                 "MP3 player",
1093                 US_SC_RBC, US_PR_BULK, NULL,
1094                 0 ),
1095
1096 /* aeb */
1097 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
1098                 "Feiya",
1099                 "5-in-1 Card Reader",
1100                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1101                 US_FL_FIX_CAPACITY ),
1102
1103 /* This Pentax still camera is not conformant
1104  * to the USB storage specification: -
1105  * - It does not like the INQUIRY command. So we must handle this command
1106  *   of the SCSI layer ourselves.
1107  * Tested on Rev. 10.00 (0x1000)
1108  * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
1109  */
1110 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
1111                 "Pentax",
1112                 "Optio 2/3/400",
1113                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1114                 US_FL_FIX_INQUIRY ),
1115
1116 /* These are virtual windows driver CDs, which the zd1211rw driver
1117  * automatically converts into WLAN devices. */
1118 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
1119                 "ZyXEL",
1120                 "G-220F USB-WLAN Install",
1121                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1122                 US_FL_IGNORE_DEVICE ),
1123
1124 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
1125                 "SiteCom",
1126                 "WL-117 USB-WLAN Install",
1127                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1128                 US_FL_IGNORE_DEVICE ),
1129
1130 /* Reported by Dan Williams <dcbw@redhat.com>
1131  * Option N.V. mobile broadband modems
1132  * Ignore driver CD mode and force into modem mode by default.
1133  */
1134
1135 /* iCON 225 */
1136 UNUSUAL_DEV(  0x0af0, 0x6971, 0x0000, 0x9999,
1137                 "Option N.V.",
1138                 "Mass Storage",
1139                 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
1140                 0),
1141
1142 /* Reported by F. Aben <f.aben@option.com>
1143  * This device (wrongly) has a vendor-specific device descriptor.
1144  * The entry is needed so usb-storage can bind to it's mass-storage
1145  * interface as an interface driver */
1146 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
1147                 "Option",
1148                 "GI 0401 SD-Card",
1149                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1150                 0 ),
1151
1152 /* Reported by Jan Dumon <j.dumon@option.com>
1153  * This device (wrongly) has a vendor-specific device descriptor.
1154  * The entry is needed so usb-storage can bind to it's mass-storage
1155  * interface as an interface driver */
1156 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
1157                 "Option",
1158                 "GI 0431 SD-Card",
1159                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1160                 0 ),
1161
1162 /* Reported by Ben Efros <ben@pc-doctor.com> */
1163 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
1164                 "Seagate",
1165                 "FreeAgent Pro",
1166                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1167                 US_FL_SANE_SENSE ),
1168
1169 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
1170                 "Maxtor",
1171                 "USB to SATA",
1172                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1173                 US_FL_SANE_SENSE),
1174
1175 /*
1176  * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
1177  * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
1178  */
1179 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
1180                 "Unknown",
1181                 "Unknown",
1182                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1183                 US_FL_SINGLE_LUN ),
1184
1185 /* Submitted by Joris Struyve <joris@struyve.be> */
1186 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
1187                 "Medion",
1188                 "MD 7425",
1189                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1190                 US_FL_FIX_INQUIRY),
1191
1192 /*
1193  * Entry for Jenoptik JD 5200z3
1194  *
1195  * email: car.busse@gmx.de
1196  */
1197 UNUSUAL_DEV(  0x0d96, 0x5200, 0x0001, 0x0200,
1198                 "Jenoptik",
1199                 "JD 5200 z3",
1200                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
1201
1202 /* Reported by  Jason Johnston <killean@shaw.ca> */
1203 UNUSUAL_DEV(  0x0dc4, 0x0073, 0x0000, 0x0000,
1204                 "Macpower Technology Co.LTD.",
1205                 "USB 2.0 3.5\" DEVICE",
1206                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1207                 US_FL_FIX_CAPACITY),
1208
1209 /* Reported by Lubomir Blaha <tritol@trilogic.cz>
1210  * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
1211  * works for me. Can anybody correct these values? (I able to test corrected
1212  * version.)
1213  */
1214 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
1215                 "Netac",
1216                 "USB-CF-Card",
1217                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1218                 US_FL_FIX_INQUIRY ),
1219
1220 /* Reported by Edward Chapman (taken from linux-usb mailing list)
1221    Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
1222 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
1223                 "Netac",
1224                 "USB Flash Disk",
1225                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1226                 US_FL_IGNORE_RESIDUE ),
1227
1228
1229 /* Patch by Stephan Walter <stephan.walter@epfl.ch>
1230  * I don't know why, but it works... */
1231 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
1232                 "WINWARD",
1233                 "Music Disk",
1234                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1235                 US_FL_IGNORE_RESIDUE ),
1236
1237 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */
1238 UNUSUAL_DEV(  0x0dda, 0x0301, 0x0012, 0x0012,
1239                 "PNP_MP3",
1240                 "PNP_MP3 PLAYER",
1241                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1242                 US_FL_IGNORE_RESIDUE ),
1243
1244 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
1245 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
1246                 "Cowon Systems",
1247                 "iAUDIO M5",
1248                 US_SC_DEVICE, US_PR_BULK, NULL,
1249                 US_FL_NEED_OVERRIDE ),
1250
1251 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
1252 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
1253                 "USB",
1254                 "Solid state disk",
1255                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1256                 US_FL_FIX_INQUIRY ),
1257
1258 /* Submitted by Daniel Drake <dsd@gentoo.org>
1259  * Reported by dayul on the Gentoo Forums */
1260 UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
1261                 "Ours Technology",
1262                 "Flash Disk",
1263                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1264                 US_FL_IGNORE_RESIDUE ),
1265
1266 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
1267 UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
1268                 "USB",
1269                 "Flash Disk",
1270                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1271                 US_FL_IGNORE_RESIDUE ),
1272
1273 /* Reported by Benjamin Schiller <sbenni@gmx.de>
1274  * It is also sold by Easylite as DJ 20 */
1275 UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
1276                 "Typhoon",
1277                 "My DJ 1820",
1278                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1279                 US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
1280
1281 /* Patch by Leonid Petrov mail at lpetrov.net
1282  * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
1283  * http://www.qbik.ch/usb/devices/showdev.php?id=1705
1284  * Updated to 103 device by MJ Ray mjr at phonecoop.coop
1285  */
1286 UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
1287                 "Oracom Co., Ltd",
1288                 "ORC-200M",
1289                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1290                 US_FL_IGNORE_RESIDUE ),
1291
1292 /* David Kuehling <dvdkhlng@gmx.de>:
1293  * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
1294  * errors when trying to write.
1295  */
1296 UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
1297                 "C-MEX",
1298                 "A-VOX",
1299                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1300                 US_FL_IGNORE_RESIDUE ),
1301
1302 /* Jeremy Katz <katzj@redhat.com>:
1303  * The Blackberry Pearl can run in two modes; a usb-storage only mode
1304  * and a mode that allows access via mass storage and to its database.
1305  * The berry_charge module will set the device to dual mode and thus we
1306  * should ignore its native mode if that module is built
1307  */
1308 #ifdef CONFIG_USB_BERRY_CHARGE
1309 UNUSUAL_DEV(  0x0fca, 0x0006, 0x0001, 0x0001,
1310                 "RIM",
1311                 "Blackberry Pearl",
1312                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1313                 US_FL_IGNORE_DEVICE ),
1314 #endif
1315
1316 /* Reported by Michael Stattmann <michael@stattmann.com> */
1317 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
1318                 "Sony Ericsson",
1319                 "V800-Vodafone 802",
1320                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1321                 US_FL_NO_WP_DETECT ),
1322
1323 /* Reported by The Solutor <thesolutor@gmail.com> */
1324 UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
1325                 "Sony Ericsson",
1326                 "MD400",
1327                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1328                 US_FL_IGNORE_DEVICE),
1329
1330 /* Reported by Jan Mate <mate@fiit.stuba.sk>
1331  * and by Soeren Sonnenburg <kernel@nn7.de> */
1332 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
1333                 "Sony Ericsson",
1334                 "P990i",
1335                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1336                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1337
1338 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
1339 UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
1340                 "Sony Ericsson",
1341                 "M600i",
1342                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1343                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
1344
1345 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */
1346 UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
1347                 "Sony Ericsson",
1348                 "P1i",
1349                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1350                 US_FL_IGNORE_RESIDUE ),
1351
1352 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
1353  * Tested on hardware version 1.10.
1354  * Entry is needed only for the initializer function override.
1355  * Devices with bcd > 110 seem to not need it while those
1356  * with bcd < 110 appear to need it.
1357  */
1358 UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x0110,
1359                 "Desknote",
1360                 "UCR-61S2B",
1361                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
1362                 0 ),
1363
1364 UNUSUAL_DEV(  0x1058, 0x0704, 0x0000, 0x9999,
1365                 "Western Digital",
1366                 "External HDD",
1367                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1368                 US_FL_SANE_SENSE),
1369
1370 /* Reported by Fabio Venturi <f.venturi@tdnet.it>
1371  * The device reports a vendor-specific bDeviceClass.
1372  */
1373 UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
1374                 "Actions Semiconductor",
1375                 "Mtp device",
1376                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1377                 0),
1378
1379 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
1380  * Entry is needed for the initializer function override,
1381  * which instructs the device to load as a modem
1382  * device.
1383  */
1384 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
1385                 "Sierra Wireless",
1386                 "USB MMC Storage",
1387                 US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
1388                 0),
1389
1390 /* Reported by Jaco Kroon <jaco@kroon.co.za>
1391  * The usb-storage module found on the Digitech GNX4 (and supposedly other
1392  * devices) misbehaves and causes a bunch of invalid I/O errors.
1393  */
1394 UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
1395                 "Digitech HMG",
1396                 "DigiTech Mass Storage",
1397                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1398                 US_FL_IGNORE_RESIDUE ),
1399
1400 /* Reported by fangxiaozhi <huananhu@huawei.com>
1401  * This brings the HUAWEI data card devices into multi-port mode
1402  */
1403 UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
1404                 "HUAWEI MOBILE",
1405                 "Mass Storage",
1406                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1407                 0),
1408 UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
1409                 "HUAWEI MOBILE",
1410                 "Mass Storage",
1411                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1412                 0),
1413 UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
1414                 "HUAWEI MOBILE",
1415                 "Mass Storage",
1416                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1417                 0),
1418 UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
1419                 "HUAWEI MOBILE",
1420                 "Mass Storage",
1421                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1422                 0),
1423 UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
1424                 "HUAWEI MOBILE",
1425                 "Mass Storage",
1426                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1427                 0),
1428 UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
1429                 "HUAWEI MOBILE",
1430                 "Mass Storage",
1431                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1432                 0),
1433 UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
1434                 "HUAWEI MOBILE",
1435                 "Mass Storage",
1436                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1437                 0),
1438 UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
1439                 "HUAWEI MOBILE",
1440                 "Mass Storage",
1441                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1442                 0),
1443 UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
1444                 "HUAWEI MOBILE",
1445                 "Mass Storage",
1446                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1447                 0),
1448 UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
1449                 "HUAWEI MOBILE",
1450                 "Mass Storage",
1451                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1452                 0),
1453 UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
1454                 "HUAWEI MOBILE",
1455                 "Mass Storage",
1456                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1457                 0),
1458 UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
1459                 "HUAWEI MOBILE",
1460                 "Mass Storage",
1461                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1462                 0),
1463 UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
1464                 "HUAWEI MOBILE",
1465                 "Mass Storage",
1466                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1467                 0),
1468 UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
1469                 "HUAWEI MOBILE",
1470                 "Mass Storage",
1471                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1472                 0),
1473 UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
1474                 "HUAWEI MOBILE",
1475                 "Mass Storage",
1476                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1477                 0),
1478 UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
1479                 "HUAWEI MOBILE",
1480                 "Mass Storage",
1481                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1482                 0),
1483 UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
1484                 "HUAWEI MOBILE",
1485                 "Mass Storage",
1486                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1487                 0),
1488 UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
1489                 "HUAWEI MOBILE",
1490                 "Mass Storage",
1491                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1492                 0),
1493 UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
1494                 "HUAWEI MOBILE",
1495                 "Mass Storage",
1496                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1497                 0),
1498 UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
1499                 "HUAWEI MOBILE",
1500                 "Mass Storage",
1501                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1502                 0),
1503 UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
1504                 "HUAWEI MOBILE",
1505                 "Mass Storage",
1506                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1507                 0),
1508 UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
1509                 "HUAWEI MOBILE",
1510                 "Mass Storage",
1511                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1512                 0),
1513 UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
1514                 "HUAWEI MOBILE",
1515                 "Mass Storage",
1516                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1517                 0),
1518 UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
1519                 "HUAWEI MOBILE",
1520                 "Mass Storage",
1521                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1522                 0),
1523 UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
1524                 "HUAWEI MOBILE",
1525                 "Mass Storage",
1526                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1527                 0),
1528 UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
1529                 "HUAWEI MOBILE",
1530                 "Mass Storage",
1531                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1532                 0),
1533 UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
1534                 "HUAWEI MOBILE",
1535                 "Mass Storage",
1536                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1537                 0),
1538 UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
1539                 "HUAWEI MOBILE",
1540                 "Mass Storage",
1541                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1542                 0),
1543 UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
1544                 "HUAWEI MOBILE",
1545                 "Mass Storage",
1546                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1547                 0),
1548 UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
1549                 "HUAWEI MOBILE",
1550                 "Mass Storage",
1551                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1552                 0),
1553 UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
1554                 "HUAWEI MOBILE",
1555                 "Mass Storage",
1556                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1557                 0),
1558 UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
1559                 "HUAWEI MOBILE",
1560                 "Mass Storage",
1561                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1562                 0),
1563 UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
1564                 "HUAWEI MOBILE",
1565                 "Mass Storage",
1566                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1567                 0),
1568 UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
1569                 "HUAWEI MOBILE",
1570                 "Mass Storage",
1571                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1572                 0),
1573 UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
1574                 "HUAWEI MOBILE",
1575                 "Mass Storage",
1576                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1577                 0),
1578 UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
1579                 "HUAWEI MOBILE",
1580                 "Mass Storage",
1581                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1582                 0),
1583 UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
1584                 "HUAWEI MOBILE",
1585                 "Mass Storage",
1586                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1587                 0),
1588 UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
1589                 "HUAWEI MOBILE",
1590                 "Mass Storage",
1591                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1592                 0),
1593 UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
1594                 "HUAWEI MOBILE",
1595                 "Mass Storage",
1596                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1597                 0),
1598 UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
1599                 "HUAWEI MOBILE",
1600                 "Mass Storage",
1601                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1602                 0),
1603 UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
1604                 "HUAWEI MOBILE",
1605                 "Mass Storage",
1606                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1607                 0),
1608 UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
1609                 "HUAWEI MOBILE",
1610                 "Mass Storage",
1611                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1612                 0),
1613 UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
1614                 "HUAWEI MOBILE",
1615                 "Mass Storage",
1616                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1617                 0),
1618 UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
1619                 "HUAWEI MOBILE",
1620                 "Mass Storage",
1621                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1622                 0),
1623 UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
1624                 "HUAWEI MOBILE",
1625                 "Mass Storage",
1626                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1627                 0),
1628 UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
1629                 "HUAWEI MOBILE",
1630                 "Mass Storage",
1631                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1632                 0),
1633 UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
1634                 "HUAWEI MOBILE",
1635                 "Mass Storage",
1636                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1637                 0),
1638 UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
1639                 "HUAWEI MOBILE",
1640                 "Mass Storage",
1641                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1642                 0),
1643 UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
1644                 "HUAWEI MOBILE",
1645                 "Mass Storage",
1646                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1647                 0),
1648 UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
1649                 "HUAWEI MOBILE",
1650                 "Mass Storage",
1651                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1652                 0),
1653 UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
1654                 "HUAWEI MOBILE",
1655                 "Mass Storage",
1656                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1657                 0),
1658 UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
1659                 "HUAWEI MOBILE",
1660                 "Mass Storage",
1661                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1662                 0),
1663 UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
1664                 "HUAWEI MOBILE",
1665                 "Mass Storage",
1666                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1667                 0),
1668 UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
1669                 "HUAWEI MOBILE",
1670                 "Mass Storage",
1671                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1672                 0),
1673 UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
1674                 "HUAWEI MOBILE",
1675                 "Mass Storage",
1676                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1677                 0),
1678 UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
1679                 "HUAWEI MOBILE",
1680                 "Mass Storage",
1681                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1682                 0),
1683 UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
1684                 "HUAWEI MOBILE",
1685                 "Mass Storage",
1686                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1687                 0),
1688 UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
1689                 "HUAWEI MOBILE",
1690                 "Mass Storage",
1691                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1692                 0),
1693 UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
1694                 "HUAWEI MOBILE",
1695                 "Mass Storage",
1696                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1697                 0),
1698 UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
1699                 "HUAWEI MOBILE",
1700                 "Mass Storage",
1701                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1702                 0),
1703 UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
1704                 "HUAWEI MOBILE",
1705                 "Mass Storage",
1706                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1707                 0),
1708 UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
1709                 "HUAWEI MOBILE",
1710                 "Mass Storage",
1711                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1712                 0),
1713 UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
1714                 "HUAWEI MOBILE",
1715                 "Mass Storage",
1716                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1717                 0),
1718 UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
1719                 "HUAWEI MOBILE",
1720                 "Mass Storage",
1721                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1722                 0),
1723 UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
1724                 "HUAWEI MOBILE",
1725                 "Mass Storage",
1726                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1727                 0),
1728 UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
1729                 "HUAWEI MOBILE",
1730                 "Mass Storage",
1731                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1732                 0),
1733
1734 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
1735 UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
1736                 "Minolta",
1737                 "Dimage Z10",
1738                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1739                 0 ),
1740
1741 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
1742 UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
1743                 "SWISSBIT",
1744                 "Black Silver",
1745                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1746                 US_FL_IGNORE_RESIDUE ),
1747
1748 /* Reported by Francesco Foresti <frafore@tiscali.it> */
1749 UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
1750                 "Super Top",
1751                 "IDE DEVICE",
1752                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1753                 US_FL_IGNORE_RESIDUE ),
1754
1755 /* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
1756  * JMicron responds to USN and several other SCSI ioctls with a
1757  * residue that causes subsequent I/O requests to fail.  */
1758 UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
1759                 "JMicron",
1760                 "USB to ATA/ATAPI Bridge",
1761                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1762                 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
1763
1764 /* Reported by Robert Schedel <r.schedel@yahoo.de>
1765  * Note: this is a 'super top' device like the above 14cd/6600 device */
1766 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
1767                 "Teac",
1768                 "HD-35PUK-B",
1769                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1770                 US_FL_IGNORE_RESIDUE ),
1771
1772 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
1773                 "ST",
1774                 "2A",
1775                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1776                 US_FL_FIX_CAPACITY),
1777
1778 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
1779  * and Renato Perini <rperini@email.it>
1780  */
1781 UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
1782                 "Motorola",
1783                 "RAZR V3x",
1784                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1785                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1786
1787 /*
1788  * Patch by Constantin Baranov <const@tltsu.ru>
1789  * Report by Andreas Koenecke.
1790  * Motorola ROKR Z6.
1791  */
1792 UNUSUAL_DEV(  0x22b8, 0x6426, 0x0101, 0x0101,
1793                 "Motorola",
1794                 "MSnc.",
1795                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1796                 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
1797
1798 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
1799 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
1800                 "MPIO",
1801                 "HS200",
1802                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1803                 US_FL_GO_SLOW ),
1804
1805 /* Reported by Rohan Hart <rohan.hart17@gmail.com> */
1806 UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
1807                 "INTOVA",
1808                 "Pixtreme",
1809                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1810                 US_FL_FIX_CAPACITY ),
1811
1812 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
1813  * Mio Moov 330
1814  */
1815 UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,
1816                 "Mitac",
1817                 "Mio DigiWalker USB Sync",
1818                 US_SC_DEVICE,US_PR_DEVICE,NULL,
1819                 US_FL_MAX_SECTORS_64 ),
1820
1821 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
1822 UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
1823                 "iRiver",
1824                 "MP3 T10",
1825                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1826                 US_FL_IGNORE_RESIDUE ),
1827
1828 /*
1829  * David Härdeman <david@2gen.com>
1830  * The key makes the SCSI stack print confusing (but harmless) messages
1831  */
1832 UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
1833                 "Iomega",
1834                 "Micro Mini 1GB",
1835                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
1836
1837 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
1838 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
1839                 "DataStor",
1840                 "USB4500 FW1.04",
1841                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1842                 US_FL_CAPACITY_HEURISTICS),
1843
1844 /* Control/Bulk transport for all SubClass values */
1845 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
1846 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
1847 USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
1848 USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
1849 USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
1850 USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
1851
1852 /* Control/Bulk/Interrupt transport for all SubClass values */
1853 USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
1854 USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
1855 USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
1856 USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
1857 USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
1858 USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
1859
1860 /* Bulk-only transport for all SubClass values */
1861 USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
1862 USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
1863 USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
1864 USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
1865 USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
1866 USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),