drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this
  15  * driver
  16  *
  17  * See http://geocities.com/i0xox0i for information on this driver and the
  18  * earthmate usb device.
  19  *
  20  *  Lonnie Mendez <dignome@gmail.com>
  21  *  4-29-2005
  22  *      Fixed problem where setting or retreiving the serial config would fail
  23  *      with EPIPE.  Removed CRTS toggling so the driver behaves more like
  24  *      other usbserial adapters.  Issued new interval of 1ms instead of the
  25  *      default 10ms.  As a result, transfer speed has been substantially
  26  *      increased from avg. 850bps to avg. 3300bps.  initial termios has also
  27  *      been modified.  Cleaned up code and formatting issues so it is more
  28  *      readable.  Replaced the C++ style comments.
  29  *
  30  *  Lonnie Mendez <dignome@gmail.com>
  31  *  12-15-2004
  32  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  33  *      handling so both lines are raised in cypress_open. (was dropping rts)
  34  *      Various code cleanups made as well along with other misc bug fixes.
  35  *
  36  *  Lonnie Mendez <dignome@gmail.com>
  37  *  04-10-2004
  38  *      Driver modified to support dynamic line settings.  Various improvments
  39  *      and features.
  40  *
  41  *  Neil Whelchel
  42  *  10-2003
  43  *      Driver first released.
  44  *
  45  */
  46
  47 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
  48    for linux. */
  49 /* Thanks to cypress for providing references for the hid reports. */
  50 /* Thanks to Jiang Zhang for providing links and for general help. */
  51 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
  52
  53
  54 #include <linux/kernel.h>
  55 #include <linux/errno.h>
  56 #include <linux/init.h>
  57 #include <linux/slab.h>
  58 #include <linux/tty.h>
  59 #include <linux/tty_driver.h>
  60 #include <linux/tty_flip.h>
  61 #include <linux/module.h>
  62 #include <linux/moduleparam.h>
  63 #include <linux/spinlock.h>
  64 #include <linux/usb.h>
  65 #include <linux/usb/serial.h>
  66 #include <linux/serial.h>
  67 #include <linux/delay.h>
  68 #include <linux/uaccess.h>
  69
  70 #include "cypress_m8.h"
  71
  72
  73 #ifdef CONFIG_USB_SERIAL_DEBUG
  74         static int debug = 1;
  75 #else
  76         static int debug;
  77 #endif
  78 static int stats;
  79 static int interval;
  80
  81 /*
  82  * Version Information
  83  */
  84 #define DRIVER_VERSION "v1.09"
  85 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  86 #define DRIVER_DESC "Cypress USB to Serial Driver"
  87
  88 /* write buffer size defines */
  89 #define CYPRESS_BUF_SIZE        1024
  90 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  91
  92 static struct usb_device_id id_table_earthmate [] = {
  93         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  94         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  95         { }                                             /* Terminating entry */
  96 };
  97
  98 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  99         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 100         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 101         { }                                             /* Terminating entry */
 102 };
 103
 104 static struct usb_device_id id_table_nokiaca42v2 [] = {
 105         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 106         { }                                             /* Terminating entry */
 107 };
 108
 109 static struct usb_device_id id_table_combined [] = {
 110         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 111         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 112         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 113         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 114         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 115         { }                                             /* Terminating entry */
 116 };
 117
 118 MODULE_DEVICE_TABLE(usb, id_table_combined);
 119
 120 static struct usb_driver cypress_driver = {
 121         .name =         "cypress",
 122         .probe =        usb_serial_probe,
 123         .disconnect =   usb_serial_disconnect,
 124         .id_table =     id_table_combined,
 125         .no_dynamic_id =        1,
 126 };
 127
 128 enum packet_format {
 129         packet_format_1,  /* b0:status, b1:payload count */
 130         packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
 131 };
 132
 133 struct cypress_private {
 134         spinlock_t lock;                   /* private lock */
 135         int chiptype;                      /* identifier of device, for quirks/etc */
 136         int bytes_in;                      /* used for statistics */
 137         int bytes_out;                     /* used for statistics */
 138         int cmd_count;                     /* used for statistics */
 139         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 140         struct cypress_buf *buf;           /* write buffer */
 141         int write_urb_in_use;              /* write urb in use indicator */
 142         int write_urb_interval;            /* interval to use for write urb */
 143         int read_urb_interval;             /* interval to use for read urb */
 144         int comm_is_ok;                    /* true if communication is (still) ok */
 145         int termios_initialized;
 146         __u8 line_control;                 /* holds dtr / rts value */
 147         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 148         __u8 current_config;               /* stores the current configuration byte */
 149         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 150         enum packet_format pkt_fmt;        /* format to use for packet send / receive */
 151         int get_cfg_unsafe;                /* If true, the CYPRESS_GET_CONFIG is unsafe */
 152         int baud_rate;                     /* stores current baud rate in
 153                                               integer form */
 154         int isthrottled;                   /* if throttled, discard reads */
 155         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 156         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 157         /* we pass a pointer to this as the arguement sent to
 158            cypress_set_termios old_termios */
 159         struct ktermios tmp_termios;       /* stores the old termios settings */
 160 };
 161
 162 /* write buffer structure */
 163 struct cypress_buf {
 164         unsigned int    buf_size;
 165         char            *buf_buf;
 166         char            *buf_get;
 167         char            *buf_put;
 168 };
 169
 170 /* function prototypes for the Cypress USB to serial device */
 171 static int  cypress_earthmate_startup(struct usb_serial *serial);
 172 static int  cypress_hidcom_startup(struct usb_serial *serial);
 173 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 174 static void cypress_shutdown(struct usb_serial *serial);
 175 static int  cypress_open(struct tty_struct *tty,
 176                         struct usb_serial_port *port, struct file *filp);
 177 static void cypress_close(struct tty_struct *tty,
 178                         struct usb_serial_port *port, struct file *filp);
 179 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 180                         const unsigned char *buf, int count);
 181 static void cypress_send(struct usb_serial_port *port);
 182 static int  cypress_write_room(struct tty_struct *tty);
 183 static int  cypress_ioctl(struct tty_struct *tty, struct file *file,
 184                         unsigned int cmd, unsigned long arg);
 185 static void cypress_set_termios(struct tty_struct *tty,
 186                         struct usb_serial_port *port, struct ktermios *old);
 187 static int  cypress_tiocmget(struct tty_struct *tty, struct file *file);
 188 static int  cypress_tiocmset(struct tty_struct *tty, struct file *file,
 189                         unsigned int set, unsigned int clear);
 190 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 191 static void cypress_throttle(struct tty_struct *tty);
 192 static void cypress_unthrottle(struct tty_struct *tty);
 193 static void cypress_set_dead(struct usb_serial_port *port);
 194 static void cypress_read_int_callback(struct urb *urb);
 195 static void cypress_write_int_callback(struct urb *urb);
 196 /* write buffer functions */
 197 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 198 static void cypress_buf_free(struct cypress_buf *cb);
 199 static void cypress_buf_clear(struct cypress_buf *cb);
 200 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
 201 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
 202 static unsigned int cypress_buf_put(struct cypress_buf *cb,
 203                                         const char *buf, unsigned int count);
 204 static unsigned int cypress_buf_get(struct cypress_buf *cb,
 205                                         char *buf, unsigned int count);
 206
 207
 208 static struct usb_serial_driver cypress_earthmate_device = {
 209         .driver = {
 210                 .owner =                THIS_MODULE,
 211                 .name =                 "earthmate",
 212         },
 213         .description =                  "DeLorme Earthmate USB",
 214         .usb_driver =                   &cypress_driver,
 215         .id_table =                     id_table_earthmate,
 216         .num_ports =                    1,
 217         .attach =                       cypress_earthmate_startup,
 218         .shutdown =                     cypress_shutdown,
 219         .open =                         cypress_open,
 220         .close =                        cypress_close,
 221         .write =                        cypress_write,
 222         .write_room =                   cypress_write_room,
 223         .ioctl =                        cypress_ioctl,
 224         .set_termios =                  cypress_set_termios,
 225         .tiocmget =                     cypress_tiocmget,
 226         .tiocmset =                     cypress_tiocmset,
 227         .chars_in_buffer =              cypress_chars_in_buffer,
 228         .throttle =                     cypress_throttle,
 229         .unthrottle =                   cypress_unthrottle,
 230         .read_int_callback =            cypress_read_int_callback,
 231         .write_int_callback =           cypress_write_int_callback,
 232 };
 233
 234 static struct usb_serial_driver cypress_hidcom_device = {
 235         .driver = {
 236                 .owner =                THIS_MODULE,
 237                 .name =                 "cyphidcom",
 238         },
 239         .description =                  "HID->COM RS232 Adapter",
 240         .usb_driver =                   &cypress_driver,
 241         .id_table =                     id_table_cyphidcomrs232,
 242         .num_ports =                    1,
 243         .attach =                       cypress_hidcom_startup,
 244         .shutdown =                     cypress_shutdown,
 245         .open =                         cypress_open,
 246         .close =                        cypress_close,
 247         .write =                        cypress_write,
 248         .write_room =                   cypress_write_room,
 249         .ioctl =                        cypress_ioctl,
 250         .set_termios =                  cypress_set_termios,
 251         .tiocmget =                     cypress_tiocmget,
 252         .tiocmset =                     cypress_tiocmset,
 253         .chars_in_buffer =              cypress_chars_in_buffer,
 254         .throttle =                     cypress_throttle,
 255         .unthrottle =                   cypress_unthrottle,
 256         .read_int_callback =            cypress_read_int_callback,
 257         .write_int_callback =           cypress_write_int_callback,
 258 };
 259
 260 static struct usb_serial_driver cypress_ca42v2_device = {
 261         .driver = {
 262                 .owner =                THIS_MODULE,
 263                 .name =                 "nokiaca42v2",
 264         },
 265         .description =                  "Nokia CA-42 V2 Adapter",
 266         .usb_driver =                   &cypress_driver,
 267         .id_table =                     id_table_nokiaca42v2,
 268         .num_ports =                    1,
 269         .attach =                       cypress_ca42v2_startup,
 270         .shutdown =                     cypress_shutdown,
 271         .open =                         cypress_open,
 272         .close =                        cypress_close,
 273         .write =                        cypress_write,
 274         .write_room =                   cypress_write_room,
 275         .ioctl =                        cypress_ioctl,
 276         .set_termios =                  cypress_set_termios,
 277         .tiocmget =                     cypress_tiocmget,
 278         .tiocmset =                     cypress_tiocmset,
 279         .chars_in_buffer =              cypress_chars_in_buffer,
 280         .throttle =                     cypress_throttle,
 281         .unthrottle =                   cypress_unthrottle,
 282         .read_int_callback =            cypress_read_int_callback,
 283         .write_int_callback =           cypress_write_int_callback,
 284 };
 285
 286 /*****************************************************************************
 287  * Cypress serial helper functions
 288  *****************************************************************************/
 289
 290
 291 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 292 {
 293         struct cypress_private *priv;
 294         priv = usb_get_serial_port_data(port);
 295
 296         /*
 297          * The general purpose firmware for the Cypress M8 allows for
 298          * a maximum speed of 57600bps (I have no idea whether DeLorme
 299          * chose to use the general purpose firmware or not), if you
 300          * need to modify this speed setting for your own project
 301          * please add your own chiptype and modify the code likewise.
 302          * The Cypress HID->COM device will work successfully up to
 303          * 115200bps (but the actual throughput is around 3kBps).
 304          */
 305         if (port->serial->dev->speed == USB_SPEED_LOW) {
 306                 /*
 307                  * Mike Isely <isely@pobox.com> 2-Feb-2008: The
 308                  * Cypress app note that describes this mechanism
 309                  * states the the low-speed part can't handle more
 310                  * than 800 bytes/sec, in which case 4800 baud is the
 311                  * safest speed for a part like that.
 312                  */
 313                 if (new_rate > 4800) {
 314                         dbg("%s - failed setting baud rate, device incapable "
 315                             "speed %d", __func__, new_rate);
 316                         return -1;
 317                 }
 318         }
 319         switch (priv->chiptype) {
 320         case CT_EARTHMATE:
 321                 if (new_rate <= 600) {
 322                         /* 300 and 600 baud rates are supported under
 323                          * the generic firmware, but are not used with
 324                          * NMEA and SiRF protocols */
 325                         dbg("%s - failed setting baud rate, unsupported speed "
 326                             "of %d on Earthmate GPS", __func__, new_rate);
 327                         return -1;
 328                 }
 329                 break;
 330         default:
 331                 break;
 332         }
 333         return new_rate;
 334 }
 335
 336
 337 /* This function can either set or retrieve the current serial line settings */
 338 static int cypress_serial_control(struct tty_struct *tty,
 339         struct usb_serial_port *port, speed_t baud_rate, int data_bits,
 340         int stop_bits, int parity_enable, int parity_type, int reset,
 341         int cypress_request_type)
 342 {
 343         int new_baudrate = 0, retval = 0, tries = 0;
 344         struct cypress_private *priv;
 345         __u8 feature_buffer[5];
 346         unsigned long flags;
 347
 348         dbg("%s", __func__);
 349
 350         priv = usb_get_serial_port_data(port);
 351
 352         if (!priv->comm_is_ok)
 353                 return -ENODEV;
 354
 355         switch (cypress_request_type) {
 356         case CYPRESS_SET_CONFIG:
 357                 new_baudrate = priv->baud_rate;
 358                 /* 0 means 'Hang up' so doesn't change the true bit rate */
 359                 if (baud_rate == 0)
 360                         new_baudrate = priv->baud_rate;
 361                 /* Change of speed ? */
 362                 else if (baud_rate != priv->baud_rate) {
 363                         dbg("%s - baud rate is changing", __func__);
 364                         retval = analyze_baud_rate(port, baud_rate);
 365                         if (retval >=  0) {
 366                                 new_baudrate = retval;
 367                                 dbg("%s - New baud rate set to %d",
 368                                     __func__, new_baudrate);
 369                         }
 370                 }
 371                 dbg("%s - baud rate is being sent as %d",
 372                                         __func__, new_baudrate);
 373
 374                 memset(feature_buffer, 0, sizeof(feature_buffer));
 375                 /* fill the feature_buffer with new configuration */
 376                 *((u_int32_t *)feature_buffer) = new_baudrate;
 377                 feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 378                 /* 1 bit gap */
 379                 feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 380                 feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 381                 feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 382                 /* 1 bit gap */
 383                 feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 384
 385                 dbg("%s - device is being sent this feature report:",
 386                                                                 __func__);
 387                 dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
 388                         feature_buffer[0], feature_buffer[1],
 389                         feature_buffer[2], feature_buffer[3],
 390                         feature_buffer[4]);
 391
 392                 do {
 393                         retval = usb_control_msg(port->serial->dev,
 394                                         usb_sndctrlpipe(port->serial->dev, 0),
 395                                         HID_REQ_SET_REPORT,
 396                                         USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 397                                         0x0300, 0, feature_buffer,
 398                                         sizeof(feature_buffer), 500);
 399
 400                         if (tries++ >= 3)
 401                                 break;
 402
 403                 } while (retval != sizeof(feature_buffer) &&
 404                          retval != -ENODEV);
 405
 406                 if (retval != sizeof(feature_buffer)) {
 407                         dev_err(&port->dev, "%s - failed sending serial "
 408                                 "line settings - %d\n", __func__, retval);
 409                         cypress_set_dead(port);
 410                 } else {
 411                         spin_lock_irqsave(&priv->lock, flags);
 412                         priv->baud_rate = new_baudrate;
 413                         priv->current_config = feature_buffer[4];
 414                         spin_unlock_irqrestore(&priv->lock, flags);
 415                         /* If we asked for a speed change encode it */
 416                         if (baud_rate)
 417                                 tty_encode_baud_rate(tty,
 418                                         new_baudrate, new_baudrate);
 419                 }
 420         break;
 421         case CYPRESS_GET_CONFIG:
 422                 if (priv->get_cfg_unsafe) {
 423                         /* Not implemented for this device,
 424                            and if we try to do it we're likely
 425                            to crash the hardware. */
 426                         return -ENOTTY;
 427                 }
 428                 dbg("%s - retreiving serial line settings", __func__);
 429                 /* set initial values in feature buffer */
 430                 memset(feature_buffer, 0, sizeof(feature_buffer));
 431
 432                 do {
 433                         retval = usb_control_msg(port->serial->dev,
 434                                         usb_rcvctrlpipe(port->serial->dev, 0),
 435                                         HID_REQ_GET_REPORT,
 436                                         USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 437                                         0x0300, 0, feature_buffer,
 438                                         sizeof(feature_buffer), 500);
 439
 440                         if (tries++ >= 3)
 441                                 break;
 442                 } while (retval != sizeof(feature_buffer)
 443                                                 && retval != -ENODEV);
 444
 445                 if (retval != sizeof(feature_buffer)) {
 446                         dev_err(&port->dev, "%s - failed to retrieve serial "
 447                                 "line settings - %d\n", __func__, retval);
 448                         cypress_set_dead(port);
 449                         return retval;
 450                 } else {
 451                         spin_lock_irqsave(&priv->lock, flags);
 452                         /* store the config in one byte, and later
 453                            use bit masks to check values */
 454                         priv->current_config = feature_buffer[4];
 455                         priv->baud_rate = *((u_int32_t *)feature_buffer);
 456                         spin_unlock_irqrestore(&priv->lock, flags);
 457                 }
 458         }
 459         spin_lock_irqsave(&priv->lock, flags);
 460         ++priv->cmd_count;
 461         spin_unlock_irqrestore(&priv->lock, flags);
 462
 463         return retval;
 464 } /* cypress_serial_control */
 465
 466
 467 static void cypress_set_dead(struct usb_serial_port *port)
 468 {
 469         struct cypress_private *priv = usb_get_serial_port_data(port);
 470         unsigned long flags;
 471
 472         spin_lock_irqsave(&priv->lock, flags);
 473         if (!priv->comm_is_ok) {
 474                 spin_unlock_irqrestore(&priv->lock, flags);
 475                 return;
 476         }
 477         priv->comm_is_ok = 0;
 478         spin_unlock_irqrestore(&priv->lock, flags);
 479
 480         dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
 481                 "interval might be too short\n", port->number);
 482 }
 483
 484
 485 /*****************************************************************************
 486  * Cypress serial driver functions
 487  *****************************************************************************/
 488
 489
 490 static int generic_startup(struct usb_serial *serial)
 491 {
 492         struct cypress_private *priv;
 493         struct usb_serial_port *port = serial->port[0];
 494
 495         dbg("%s - port %d", __func__, port->number);
 496
 497         priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 498         if (!priv)
 499                 return -ENOMEM;
 500
 501         priv->comm_is_ok = !0;
 502         spin_lock_init(&priv->lock);
 503         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 504         if (priv->buf == NULL) {
 505                 kfree(priv);
 506                 return -ENOMEM;
 507         }
 508         init_waitqueue_head(&priv->delta_msr_wait);
 509
 510         usb_reset_configuration(serial->dev);
 511
 512         priv->cmd_ctrl = 0;
 513         priv->line_control = 0;
 514         priv->termios_initialized = 0;
 515         priv->rx_flags = 0;
 516         /* Default packet format setting is determined by packet size.
 517            Anything with a size larger then 9 must have a separate
 518            count field since the 3 bit count field is otherwise too
 519            small.  Otherwise we can use the slightly more compact
 520            format.  This is in accordance with the cypress_m8 serial
 521            converter app note. */
 522         if (port->interrupt_out_size > 9)
 523                 priv->pkt_fmt = packet_format_1;
 524         else
 525                 priv->pkt_fmt = packet_format_2;
 526
 527         if (interval > 0) {
 528                 priv->write_urb_interval = interval;
 529                 priv->read_urb_interval = interval;
 530                 dbg("%s - port %d read & write intervals forced to %d",
 531                     __func__, port->number, interval);
 532         } else {
 533                 priv->write_urb_interval = port->interrupt_out_urb->interval;
 534                 priv->read_urb_interval = port->interrupt_in_urb->interval;
 535                 dbg("%s - port %d intervals: read=%d write=%d",
 536                     __func__, port->number,
 537                     priv->read_urb_interval, priv->write_urb_interval);
 538         }
 539         usb_set_serial_port_data(port, priv);
 540
 541         return 0;
 542 }
 543
 544
 545 static int cypress_earthmate_startup(struct usb_serial *serial)
 546 {
 547         struct cypress_private *priv;
 548         struct usb_serial_port *port = serial->port[0];
 549
 550         dbg("%s", __func__);
 551
 552         if (generic_startup(serial)) {
 553                 dbg("%s - Failed setting up port %d", __func__,
 554                                 port->number);
 555                 return 1;
 556         }
 557
 558         priv = usb_get_serial_port_data(port);
 559         priv->chiptype = CT_EARTHMATE;
 560         /* All Earthmate devices use the separated-count packet
 561            format!  Idiotic. */
 562         priv->pkt_fmt = packet_format_1;
 563         if (serial->dev->descriptor.idProduct !=
 564                                 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
 565                 /* The old original USB Earthmate seemed able to
 566                    handle GET_CONFIG requests; everything they've
 567                    produced since that time crashes if this command is
 568                    attempted :-( */
 569                 dbg("%s - Marking this device as unsafe for GET_CONFIG "
 570                     "commands", __func__);
 571                 priv->get_cfg_unsafe = !0;
 572         }
 573
 574         return 0;
 575 } /* cypress_earthmate_startup */
 576
 577
 578 static int cypress_hidcom_startup(struct usb_serial *serial)
 579 {
 580         struct cypress_private *priv;
 581
 582         dbg("%s", __func__);
 583
 584         if (generic_startup(serial)) {
 585                 dbg("%s - Failed setting up port %d", __func__,
 586                                 serial->port[0]->number);
 587                 return 1;
 588         }
 589
 590         priv = usb_get_serial_port_data(serial->port[0]);
 591         priv->chiptype = CT_CYPHIDCOM;
 592
 593         return 0;
 594 } /* cypress_hidcom_startup */
 595
 596
 597 static int cypress_ca42v2_startup(struct usb_serial *serial)
 598 {
 599         struct cypress_private *priv;
 600
 601         dbg("%s", __func__);
 602
 603         if (generic_startup(serial)) {
 604                 dbg("%s - Failed setting up port %d", __func__,
 605                                 serial->port[0]->number);
 606                 return 1;
 607         }
 608
 609         priv = usb_get_serial_port_data(serial->port[0]);
 610         priv->chiptype = CT_CA42V2;
 611
 612         return 0;
 613 } /* cypress_ca42v2_startup */
 614
 615
 616 static void cypress_shutdown(struct usb_serial *serial)
 617 {
 618         struct cypress_private *priv;
 619
 620         dbg("%s - port %d", __func__, serial->port[0]->number);
 621
 622         /* all open ports are closed at this point */
 623
 624         priv = usb_get_serial_port_data(serial->port[0]);
 625
 626         if (priv) {
 627                 cypress_buf_free(priv->buf);
 628                 kfree(priv);
 629                 usb_set_serial_port_data(serial->port[0], NULL);
 630         }
 631 }
 632
 633
 634 static int cypress_open(struct tty_struct *tty,
 635                         struct usb_serial_port *port, struct file *filp)
 636 {
 637         struct cypress_private *priv = usb_get_serial_port_data(port);
 638         struct usb_serial *serial = port->serial;
 639         unsigned long flags;
 640         int result = 0;
 641
 642         dbg("%s - port %d", __func__, port->number);
 643
 644         if (!priv->comm_is_ok)
 645                 return -EIO;
 646
 647         /* clear halts before open */
 648         usb_clear_halt(serial->dev, 0x81);
 649         usb_clear_halt(serial->dev, 0x02);
 650
 651         spin_lock_irqsave(&priv->lock, flags);
 652         /* reset read/write statistics */
 653         priv->bytes_in = 0;
 654         priv->bytes_out = 0;
 655         priv->cmd_count = 0;
 656         priv->rx_flags = 0;
 657         spin_unlock_irqrestore(&priv->lock, flags);
 658
 659         /* raise both lines and set termios */
 660         spin_lock_irqsave(&priv->lock, flags);
 661         priv->line_control = CONTROL_DTR | CONTROL_RTS;
 662         priv->cmd_ctrl = 1;
 663         spin_unlock_irqrestore(&priv->lock, flags);
 664         result = cypress_write(tty, port, NULL, 0);
 665
 666         if (result) {
 667                 dev_err(&port->dev,
 668                         "%s - failed setting the control lines - error %d\n",
 669                                                         __func__, result);
 670                 return result;
 671         } else
 672                 dbg("%s - success setting the control lines", __func__);
 673
 674         if (tty)
 675                 cypress_set_termios(tty, port, &priv->tmp_termios);
 676
 677         /* setup the port and start reading from the device */
 678         if (!port->interrupt_in_urb) {
 679                 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
 680                         __func__);
 681                 return -1;
 682         }
 683
 684         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 685                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 686                 port->interrupt_in_urb->transfer_buffer,
 687                 port->interrupt_in_urb->transfer_buffer_length,
 688                 cypress_read_int_callback, port, priv->read_urb_interval);
 689         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 690
 691         if (result) {
 692                 dev_err(&port->dev,
 693                         "%s - failed submitting read urb, error %d\n",
 694                                                         __func__, result);
 695                 cypress_set_dead(port);
 696         }
 697
 698         return result;
 699 } /* cypress_open */
 700
 701
 702 static void cypress_close(struct tty_struct *tty,
 703                         struct usb_serial_port *port, struct file *filp)
 704 {
 705         struct cypress_private *priv = usb_get_serial_port_data(port);
 706         unsigned int c_cflag;
 707         int bps;
 708         long timeout;
 709         wait_queue_t wait;
 710
 711         dbg("%s - port %d", __func__, port->number);
 712
 713         /* wait for data to drain from buffer */
 714         spin_lock_irq(&priv->lock);
 715         timeout = CYPRESS_CLOSING_WAIT;
 716         init_waitqueue_entry(&wait, current);
 717         add_wait_queue(&tty->write_wait, &wait);
 718         for (;;) {
 719                 set_current_state(TASK_INTERRUPTIBLE);
 720                 if (cypress_buf_data_avail(priv->buf) == 0
 721                 || timeout == 0 || signal_pending(current)
 722                 /* without mutex, allowed due to harmless failure mode */
 723                 || port->serial->disconnected)
 724                         break;
 725                 spin_unlock_irq(&priv->lock);
 726                 timeout = schedule_timeout(timeout);
 727                 spin_lock_irq(&priv->lock);
 728         }
 729         set_current_state(TASK_RUNNING);
 730         remove_wait_queue(&tty->write_wait, &wait);
 731         /* clear out any remaining data in the buffer */
 732         cypress_buf_clear(priv->buf);
 733         spin_unlock_irq(&priv->lock);
 734
 735         /* writing is potentially harmful, lock must be taken */
 736         mutex_lock(&port->serial->disc_mutex);
 737         if (port->serial->disconnected) {
 738                 mutex_unlock(&port->serial->disc_mutex);
 739                 return;
 740         }
 741         /* wait for characters to drain from device */
 742         if (tty) {
 743                 bps = tty_get_baud_rate(tty);
 744                 if (bps > 1200)
 745                         timeout = max((HZ * 2560) / bps, HZ / 10);
 746                 else
 747                         timeout = 2 * HZ;
 748                 schedule_timeout_interruptible(timeout);
 749         }
 750
 751         dbg("%s - stopping urbs", __func__);
 752         usb_kill_urb(port->interrupt_in_urb);
 753         usb_kill_urb(port->interrupt_out_urb);
 754
 755         if (tty) {
 756                 c_cflag = tty->termios->c_cflag;
 757                 if (c_cflag & HUPCL) {
 758                         /* drop dtr and rts */
 759                         priv = usb_get_serial_port_data(port);
 760                         spin_lock_irq(&priv->lock);
 761                         priv->line_control = 0;
 762                         priv->cmd_ctrl = 1;
 763                         spin_unlock_irq(&priv->lock);
 764                         cypress_write(tty, port, NULL, 0);
 765                 }
 766         }
 767
 768         if (stats)
 769                 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 770                         priv->bytes_in, priv->bytes_out, priv->cmd_count);
 771         mutex_unlock(&port->serial->disc_mutex);
 772 } /* cypress_close */
 773
 774
 775 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 776                                         const unsigned char *buf, int count)
 777 {
 778         struct cypress_private *priv = usb_get_serial_port_data(port);
 779         unsigned long flags;
 780
 781         dbg("%s - port %d, %d bytes", __func__, port->number, count);
 782
 783         /* line control commands, which need to be executed immediately,
 784            are not put into the buffer for obvious reasons.
 785          */
 786         if (priv->cmd_ctrl) {
 787                 count = 0;
 788                 goto finish;
 789         }
 790
 791         if (!count)
 792                 return count;
 793
 794         spin_lock_irqsave(&priv->lock, flags);
 795         count = cypress_buf_put(priv->buf, buf, count);
 796         spin_unlock_irqrestore(&priv->lock, flags);
 797
 798 finish:
 799         cypress_send(port);
 800
 801         return count;
 802 } /* cypress_write */
 803
 804
 805 static void cypress_send(struct usb_serial_port *port)
 806 {
 807         int count = 0, result, offset, actual_size;
 808         struct cypress_private *priv = usb_get_serial_port_data(port);
 809         unsigned long flags;
 810
 811         if (!priv->comm_is_ok)
 812                 return;
 813
 814         dbg("%s - port %d", __func__, port->number);
 815         dbg("%s - interrupt out size is %d", __func__,
 816                                                 port->interrupt_out_size);
 817
 818         spin_lock_irqsave(&priv->lock, flags);
 819         if (priv->write_urb_in_use) {
 820                 dbg("%s - can't write, urb in use", __func__);
 821                 spin_unlock_irqrestore(&priv->lock, flags);
 822                 return;
 823         }
 824         spin_unlock_irqrestore(&priv->lock, flags);
 825
 826         /* clear buffer */
 827         memset(port->interrupt_out_urb->transfer_buffer, 0,
 828                                                 port->interrupt_out_size);
 829
 830         spin_lock_irqsave(&priv->lock, flags);
 831         switch (priv->pkt_fmt) {
 832         default:
 833         case packet_format_1:
 834                 /* this is for the CY7C64013... */
 835                 offset = 2;
 836                 port->interrupt_out_buffer[0] = priv->line_control;
 837                 break;
 838         case packet_format_2:
 839                 /* this is for the CY7C63743... */
 840                 offset = 1;
 841                 port->interrupt_out_buffer[0] = priv->line_control;
 842                 break;
 843         }
 844
 845         if (priv->line_control & CONTROL_RESET)
 846                 priv->line_control &= ~CONTROL_RESET;
 847
 848         if (priv->cmd_ctrl) {
 849                 priv->cmd_count++;
 850                 dbg("%s - line control command being issued", __func__);
 851                 spin_unlock_irqrestore(&priv->lock, flags);
 852                 goto send;
 853         } else
 854                 spin_unlock_irqrestore(&priv->lock, flags);
 855
 856         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 857                                 port->interrupt_out_size-offset);
 858
 859         if (count == 0)
 860                 return;
 861
 862         switch (priv->pkt_fmt) {
 863         default:
 864         case packet_format_1:
 865                 port->interrupt_out_buffer[1] = count;
 866                 break;
 867         case packet_format_2:
 868                 port->interrupt_out_buffer[0] |= count;
 869         }
 870
 871         dbg("%s - count is %d", __func__, count);
 872
 873 send:
 874         spin_lock_irqsave(&priv->lock, flags);
 875         priv->write_urb_in_use = 1;
 876         spin_unlock_irqrestore(&priv->lock, flags);
 877
 878         if (priv->cmd_ctrl)
 879                 actual_size = 1;
 880         else
 881                 actual_size = count +
 882                               (priv->pkt_fmt == packet_format_1 ? 2 : 1);
 883
 884         usb_serial_debug_data(debug, &port->dev, __func__,
 885                 port->interrupt_out_size,
 886                 port->interrupt_out_urb->transfer_buffer);
 887
 888         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 889                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 890                 port->interrupt_out_buffer, port->interrupt_out_size,
 891                 cypress_write_int_callback, port, priv->write_urb_interval);
 892         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 893         if (result) {
 894                 dev_err(&port->dev,
 895                                 "%s - failed submitting write urb, error %d\n",
 896                                                         __func__, result);
 897                 priv->write_urb_in_use = 0;
 898                 cypress_set_dead(port);
 899         }
 900
 901         spin_lock_irqsave(&priv->lock, flags);
 902         if (priv->cmd_ctrl)
 903                 priv->cmd_ctrl = 0;
 904
 905         /* do not count the line control and size bytes */
 906         priv->bytes_out += count;
 907         spin_unlock_irqrestore(&priv->lock, flags);
 908
 909         usb_serial_port_softint(port);
 910 } /* cypress_send */
 911
 912
 913 /* returns how much space is available in the soft buffer */
 914 static int cypress_write_room(struct tty_struct *tty)
 915 {
 916         struct usb_serial_port *port = tty->driver_data;
 917         struct cypress_private *priv = usb_get_serial_port_data(port);
 918         int room = 0;
 919         unsigned long flags;
 920
 921         dbg("%s - port %d", __func__, port->number);
 922
 923         spin_lock_irqsave(&priv->lock, flags);
 924         room = cypress_buf_space_avail(priv->buf);
 925         spin_unlock_irqrestore(&priv->lock, flags);
 926
 927         dbg("%s - returns %d", __func__, room);
 928         return room;
 929 }
 930
 931
 932 static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 933 {
 934         struct usb_serial_port *port = tty->driver_data;
 935         struct cypress_private *priv = usb_get_serial_port_data(port);
 936         __u8 status, control;
 937         unsigned int result = 0;
 938         unsigned long flags;
 939
 940         dbg("%s - port %d", __func__, port->number);
 941
 942         spin_lock_irqsave(&priv->lock, flags);
 943         control = priv->line_control;
 944         status = priv->current_status;
 945         spin_unlock_irqrestore(&priv->lock, flags);
 946
 947         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 948                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 949                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 950                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 951                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 952                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 953
 954         dbg("%s - result = %x", __func__, result);
 955
 956         return result;
 957 }
 958
 959
 960 static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 961                                unsigned int set, unsigned int clear)
 962 {
 963         struct usb_serial_port *port = tty->driver_data;
 964         struct cypress_private *priv = usb_get_serial_port_data(port);
 965         unsigned long flags;
 966
 967         dbg("%s - port %d", __func__, port->number);
 968
 969         spin_lock_irqsave(&priv->lock, flags);
 970         if (set & TIOCM_RTS)
 971                 priv->line_control |= CONTROL_RTS;
 972         if (set & TIOCM_DTR)
 973                 priv->line_control |= CONTROL_DTR;
 974         if (clear & TIOCM_RTS)
 975                 priv->line_control &= ~CONTROL_RTS;
 976         if (clear & TIOCM_DTR)
 977                 priv->line_control &= ~CONTROL_DTR;
 978         priv->cmd_ctrl = 1;
 979         spin_unlock_irqrestore(&priv->lock, flags);
 980
 981         return cypress_write(tty, port, NULL, 0);
 982 }
 983
 984
 985 static int cypress_ioctl(struct tty_struct *tty, struct file *file,
 986                                         unsigned int cmd, unsigned long arg)
 987 {
 988         struct usb_serial_port *port = tty->driver_data;
 989         struct cypress_private *priv = usb_get_serial_port_data(port);
 990
 991         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 992
 993         switch (cmd) {
 994         /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 995         case TIOCMIWAIT:
 996                 while (priv != NULL) {
 997                         interruptible_sleep_on(&priv->delta_msr_wait);
 998                         /* see if a signal did it */
 999                         if (signal_pending(current))
1000                                 return -ERESTARTSYS;
1001                         else {
1002                                 char diff = priv->diff_status;
1003                                 if (diff == 0)
1004                                         return -EIO; /* no change => error */
1005
1006                                 /* consume all events */
1007                                 priv->diff_status = 0;
1008
1009                                 /* return 0 if caller wanted to know about
1010                                    these bits */
1011                                 if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
1012                                     ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
1013                                     ((arg & TIOCM_CD) && (diff & UART_CD)) ||
1014                                     ((arg & TIOCM_CTS) && (diff & UART_CTS)))
1015                                         return 0;
1016                                 /* otherwise caller can't care less about what
1017                                  * happened, and so we continue to wait for
1018                                  * more events.
1019                                  */
1020                         }
1021                 }
1022                 return 0;
1023         default:
1024                 break;
1025         }
1026         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
1027         return -ENOIOCTLCMD;
1028 } /* cypress_ioctl */
1029
1030
1031 static void cypress_set_termios(struct tty_struct *tty,
1032         struct usb_serial_port *port, struct ktermios *old_termios)
1033 {
1034         struct cypress_private *priv = usb_get_serial_port_data(port);
1035         int data_bits, stop_bits, parity_type, parity_enable;
1036         unsigned cflag, iflag;
1037         unsigned long flags;
1038         __u8 oldlines;
1039         int linechange = 0;
1040
1041         dbg("%s - port %d", __func__, port->number);
1042
1043         spin_lock_irqsave(&priv->lock, flags);
1044         if (!priv->termios_initialized) {
1045                 if (priv->chiptype == CT_EARTHMATE) {
1046                         *(tty->termios) = tty_std_termios;
1047                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1048                                 CLOCAL;
1049                         tty->termios->c_ispeed = 4800;
1050                         tty->termios->c_ospeed = 4800;
1051                 } else if (priv->chiptype == CT_CYPHIDCOM) {
1052                         *(tty->termios) = tty_std_termios;
1053                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1054                                 CLOCAL;
1055                         tty->termios->c_ispeed = 9600;
1056                         tty->termios->c_ospeed = 9600;
1057                 } else if (priv->chiptype == CT_CA42V2) {
1058                         *(tty->termios) = tty_std_termios;
1059                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1060                                 CLOCAL;
1061                         tty->termios->c_ispeed = 9600;
1062                         tty->termios->c_ospeed = 9600;
1063                 }
1064                 priv->termios_initialized = 1;
1065         }
1066         spin_unlock_irqrestore(&priv->lock, flags);
1067
1068         /* Unsupported features need clearing */
1069         tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
1070
1071         cflag = tty->termios->c_cflag;
1072         iflag = tty->termios->c_iflag;
1073
1074         /* check if there are new settings */
1075         if (old_termios) {
1076                 spin_lock_irqsave(&priv->lock, flags);
1077                 priv->tmp_termios = *(tty->termios);
1078                 spin_unlock_irqrestore(&priv->lock, flags);
1079         }
1080
1081         /* set number of data bits, parity, stop bits */
1082         /* when parity is disabled the parity type bit is ignored */
1083
1084         /* 1 means 2 stop bits, 0 means 1 stop bit */
1085         stop_bits = cflag & CSTOPB ? 1 : 0;
1086
1087         if (cflag & PARENB) {
1088                 parity_enable = 1;
1089                 /* 1 means odd parity, 0 means even parity */
1090                 parity_type = cflag & PARODD ? 1 : 0;
1091         } else
1092                 parity_enable = parity_type = 0;
1093
1094         switch (cflag & CSIZE) {
1095         case CS5:
1096                 data_bits = 0;
1097                 break;
1098         case CS6:
1099                 data_bits = 1;
1100                 break;
1101         case CS7:
1102                 data_bits = 2;
1103                 break;
1104         case CS8:
1105                 data_bits = 3;
1106                 break;
1107         default:
1108                 dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
1109                         __func__);
1110                 data_bits = 3;
1111         }
1112         spin_lock_irqsave(&priv->lock, flags);
1113         oldlines = priv->line_control;
1114         if ((cflag & CBAUD) == B0) {
1115                 /* drop dtr and rts */
1116                 dbg("%s - dropping the lines, baud rate 0bps", __func__);
1117                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1118         } else
1119                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1120         spin_unlock_irqrestore(&priv->lock, flags);
1121
1122         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1123                         "%d data_bits (+5)", __func__, stop_bits,
1124                         parity_enable, parity_type, data_bits);
1125
1126         cypress_serial_control(tty, port, tty_get_baud_rate(tty),
1127                         data_bits, stop_bits,
1128                         parity_enable, parity_type,
1129                         0, CYPRESS_SET_CONFIG);
1130
1131         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1132          * filled into the private structure this should confirm that all is
1133          * working if it returns what we just set */
1134         cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1135
1136         /* Here we can define custom tty settings for devices; the main tty
1137          * termios flag base comes from empeg.c */
1138
1139         spin_lock_irqsave(&priv->lock, flags);
1140         if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
1141                 dbg("Using custom termios settings for a baud rate of "
1142                                 "4800bps.");
1143                 /* define custom termios settings for NMEA protocol */
1144
1145                 tty->termios->c_iflag /* input modes - */
1146                         &= ~(IGNBRK  /* disable ignore break */
1147                         | BRKINT     /* disable break causes interrupt */
1148                         | PARMRK     /* disable mark parity errors */
1149                         | ISTRIP     /* disable clear high bit of input char */
1150                         | INLCR      /* disable translate NL to CR */
1151                         | IGNCR      /* disable ignore CR */
1152                         | ICRNL      /* disable translate CR to NL */
1153                         | IXON);     /* disable enable XON/XOFF flow control */
1154
1155                 tty->termios->c_oflag /* output modes */
1156                         &= ~OPOST;    /* disable postprocess output char */
1157
1158                 tty->termios->c_lflag /* line discipline modes */
1159                         &= ~(ECHO     /* disable echo input characters */
1160                         | ECHONL      /* disable echo new line */
1161                         | ICANON      /* disable erase, kill, werase, and rprnt
1162                                          special characters */
1163                         | ISIG        /* disable interrupt, quit, and suspend
1164                                          special characters */
1165                         | IEXTEN);    /* disable non-POSIX special characters */
1166         } /* CT_CYPHIDCOM: Application should handle this for device */
1167
1168         linechange = (priv->line_control != oldlines);
1169         spin_unlock_irqrestore(&priv->lock, flags);
1170
1171         /* if necessary, set lines */
1172         if (linechange) {
1173                 priv->cmd_ctrl = 1;
1174                 cypress_write(tty, port, NULL, 0);
1175         }
1176 } /* cypress_set_termios */
1177
1178
1179 /* returns amount of data still left in soft buffer */
1180 static int cypress_chars_in_buffer(struct tty_struct *tty)
1181 {
1182         struct usb_serial_port *port = tty->driver_data;
1183         struct cypress_private *priv = usb_get_serial_port_data(port);
1184         int chars = 0;
1185         unsigned long flags;
1186
1187         dbg("%s - port %d", __func__, port->number);
1188
1189         spin_lock_irqsave(&priv->lock, flags);
1190         chars = cypress_buf_data_avail(priv->buf);
1191         spin_unlock_irqrestore(&priv->lock, flags);
1192
1193         dbg("%s - returns %d", __func__, chars);
1194         return chars;
1195 }
1196
1197
1198 static void cypress_throttle(struct tty_struct *tty)
1199 {
1200         struct usb_serial_port *port = tty->driver_data;
1201         struct cypress_private *priv = usb_get_serial_port_data(port);
1202         unsigned long flags;
1203
1204         dbg("%s - port %d", __func__, port->number);
1205
1206         spin_lock_irqsave(&priv->lock, flags);
1207         priv->rx_flags = THROTTLED;
1208         spin_unlock_irqrestore(&priv->lock, flags);
1209 }
1210
1211
1212 static void cypress_unthrottle(struct tty_struct *tty)
1213 {
1214         struct usb_serial_port *port = tty->driver_data;
1215         struct cypress_private *priv = usb_get_serial_port_data(port);
1216         int actually_throttled, result;
1217         unsigned long flags;
1218
1219         dbg("%s - port %d", __func__, port->number);
1220
1221         spin_lock_irqsave(&priv->lock, flags);
1222         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1223         priv->rx_flags = 0;
1224         spin_unlock_irqrestore(&priv->lock, flags);
1225
1226         if (!priv->comm_is_ok)
1227                 return;
1228
1229         if (actually_throttled) {
1230                 port->interrupt_in_urb->dev = port->serial->dev;
1231
1232                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1233                 if (result) {
1234                         dev_err(&port->dev, "%s - failed submitting read urb, "
1235                                         "error %d\n", __func__, result);
1236                         cypress_set_dead(port);
1237                 }
1238         }
1239 }
1240
1241
1242 static void cypress_read_int_callback(struct urb *urb)
1243 {
1244         struct usb_serial_port *port = urb->context;
1245         struct cypress_private *priv = usb_get_serial_port_data(port);
1246         struct tty_struct *tty;
1247         unsigned char *data = urb->transfer_buffer;
1248         unsigned long flags;
1249         char tty_flag = TTY_NORMAL;
1250         int havedata = 0;
1251         int bytes = 0;
1252         int result;
1253         int i = 0;
1254         int status = urb->status;
1255
1256         dbg("%s - port %d", __func__, port->number);
1257
1258         switch (status) {
1259         case 0: /* success */
1260                 break;
1261         case -ECONNRESET:
1262         case -ENOENT:
1263         case -ESHUTDOWN:
1264                 /* precursor to disconnect so just go away */
1265                 return;
1266         case -EPIPE:
1267                 usb_clear_halt(port->serial->dev, 0x81);
1268                 break;
1269         default:
1270                 /* something ugly is going on... */
1271                 dev_err(&urb->dev->dev,
1272                         "%s - unexpected nonzero read status received: %d\n",
1273                                                         __func__, status);
1274                 cypress_set_dead(port);
1275                 return;
1276         }
1277
1278         spin_lock_irqsave(&priv->lock, flags);
1279         if (priv->rx_flags & THROTTLED) {
1280                 dbg("%s - now throttling", __func__);
1281                 priv->rx_flags |= ACTUALLY_THROTTLED;
1282                 spin_unlock_irqrestore(&priv->lock, flags);
1283                 return;
1284         }
1285         spin_unlock_irqrestore(&priv->lock, flags);
1286
1287         tty = tty_port_tty_get(&port->port);
1288         if (!tty) {
1289                 dbg("%s - bad tty pointer - exiting", __func__);
1290                 return;
1291         }
1292
1293         spin_lock_irqsave(&priv->lock, flags);
1294         result = urb->actual_length;
1295         switch (priv->pkt_fmt) {
1296         default:
1297         case packet_format_1:
1298                 /* This is for the CY7C64013... */
1299                 priv->current_status = data[0] & 0xF8;
1300                 bytes = data[1] + 2;
1301                 i = 2;
1302                 if (bytes > 2)
1303                         havedata = 1;
1304                 break;
1305         case packet_format_2:
1306                 /* This is for the CY7C63743... */
1307                 priv->current_status = data[0] & 0xF8;
1308                 bytes = (data[0] & 0x07) + 1;
1309                 i = 1;
1310                 if (bytes > 1)
1311                         havedata = 1;
1312                 break;
1313         }
1314         spin_unlock_irqrestore(&priv->lock, flags);
1315         if (result < bytes) {
1316                 dbg("%s - wrong packet size - received %d bytes but packet "
1317                     "said %d bytes", __func__, result, bytes);
1318                 goto continue_read;
1319         }
1320
1321         usb_serial_debug_data(debug, &port->dev, __func__,
1322                                                 urb->actual_length, data);
1323
1324         spin_lock_irqsave(&priv->lock, flags);
1325         /* check to see if status has changed */
1326         if (priv->current_status != priv->prev_status) {
1327                 priv->diff_status |= priv->current_status ^
1328                         priv->prev_status;
1329                 wake_up_interruptible(&priv->delta_msr_wait);
1330                 priv->prev_status = priv->current_status;
1331         }
1332         spin_unlock_irqrestore(&priv->lock, flags);
1333
1334         /* hangup, as defined in acm.c... this might be a bad place for it
1335          * though */
1336         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1337                         !(priv->current_status & UART_CD)) {
1338                 dbg("%s - calling hangup", __func__);
1339                 tty_hangup(tty);
1340                 goto continue_read;
1341         }
1342
1343         /* There is one error bit... I'm assuming it is a parity error
1344          * indicator as the generic firmware will set this bit to 1 if a
1345          * parity error occurs.
1346          * I can not find reference to any other error events. */
1347         spin_lock_irqsave(&priv->lock, flags);
1348         if (priv->current_status & CYP_ERROR) {
1349                 spin_unlock_irqrestore(&priv->lock, flags);
1350                 tty_flag = TTY_PARITY;
1351                 dbg("%s - Parity Error detected", __func__);
1352         } else
1353                 spin_unlock_irqrestore(&priv->lock, flags);
1354
1355         /* process read if there is data other than line status */
1356         if (tty && (bytes > i)) {
1357                 bytes = tty_buffer_request_room(tty, bytes);
1358                 for (; i < bytes ; ++i) {
1359                         dbg("pushing byte number %d - %d - %c", i, data[i],
1360                                         data[i]);
1361                         tty_insert_flip_char(tty, data[i], tty_flag);
1362                 }
1363                 tty_flip_buffer_push(tty);
1364         }
1365
1366         spin_lock_irqsave(&priv->lock, flags);
1367         /* control and status byte(s) are also counted */
1368         priv->bytes_in += bytes;
1369         spin_unlock_irqrestore(&priv->lock, flags);
1370
1371 continue_read:
1372         tty_kref_put(tty);
1373
1374         /* Continue trying to always read... unless the port has closed. */
1375
1376         if (port->port.count > 0 && priv->comm_is_ok) {
1377                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1378                                 usb_rcvintpipe(port->serial->dev,
1379                                         port->interrupt_in_endpointAddress),
1380                                 port->interrupt_in_urb->transfer_buffer,
1381                                 port->interrupt_in_urb->transfer_buffer_length,
1382                                 cypress_read_int_callback, port,
1383                                 priv->read_urb_interval);
1384                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1385                 if (result) {
1386                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1387                                         "read urb, error %d\n", __func__,
1388                                         result);
1389                         cypress_set_dead(port);
1390                 }
1391         }
1392
1393         return;
1394 } /* cypress_read_int_callback */
1395
1396
1397 static void cypress_write_int_callback(struct urb *urb)
1398 {
1399         struct usb_serial_port *port = urb->context;
1400         struct cypress_private *priv = usb_get_serial_port_data(port);
1401         int result;
1402         int status = urb->status;
1403
1404         dbg("%s - port %d", __func__, port->number);
1405
1406         switch (status) {
1407         case 0:
1408                 /* success */
1409                 break;
1410         case -ECONNRESET:
1411         case -ENOENT:
1412         case -ESHUTDOWN:
1413                 /* this urb is terminated, clean up */
1414                 dbg("%s - urb shutting down with status: %d",
1415                                                 __func__, status);
1416                 priv->write_urb_in_use = 0;
1417                 return;
1418         case -EPIPE: /* no break needed; clear halt and resubmit */
1419                 if (!priv->comm_is_ok)
1420                         break;
1421                 usb_clear_halt(port->serial->dev, 0x02);
1422                 /* error in the urb, so we have to resubmit it */
1423                 dbg("%s - nonzero write bulk status received: %d",
1424                         __func__, status);
1425                 port->interrupt_out_urb->transfer_buffer_length = 1;
1426                 port->interrupt_out_urb->dev = port->serial->dev;
1427                 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1428                 if (!result)
1429                         return;
1430                 dev_err(&urb->dev->dev,
1431                         "%s - failed resubmitting write urb, error %d\n",
1432                                                         __func__, result);
1433                 cypress_set_dead(port);
1434                 break;
1435         default:
1436                 dev_err(&urb->dev->dev,
1437                          "%s - unexpected nonzero write status received: %d\n",
1438                                                         __func__, status);
1439                 cypress_set_dead(port);
1440                 break;
1441         }
1442         priv->write_urb_in_use = 0;
1443
1444         /* send any buffered data */
1445         cypress_send(port);
1446 }
1447
1448
1449 /*****************************************************************************
1450  * Write buffer functions - buffering code from pl2303 used
1451  *****************************************************************************/
1452
1453 /*
1454  * cypress_buf_alloc
1455  *
1456  * Allocate a circular buffer and all associated memory.
1457  */
1458
1459 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1460 {
1461
1462         struct cypress_buf *cb;
1463
1464
1465         if (size == 0)
1466                 return NULL;
1467
1468         cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1469         if (cb == NULL)
1470                 return NULL;
1471
1472         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1473         if (cb->buf_buf == NULL) {
1474                 kfree(cb);
1475                 return NULL;
1476         }
1477
1478         cb->buf_size = size;
1479         cb->buf_get = cb->buf_put = cb->buf_buf;
1480
1481         return cb;
1482
1483 }
1484
1485
1486 /*
1487  * cypress_buf_free
1488  *
1489  * Free the buffer and all associated memory.
1490  */
1491
1492 static void cypress_buf_free(struct cypress_buf *cb)
1493 {
1494         if (cb) {
1495                 kfree(cb->buf_buf);
1496                 kfree(cb);
1497         }
1498 }
1499
1500
1501 /*
1502  * cypress_buf_clear
1503  *
1504  * Clear out all data in the circular buffer.
1505  */
1506
1507 static void cypress_buf_clear(struct cypress_buf *cb)
1508 {
1509         if (cb != NULL)
1510                 cb->buf_get = cb->buf_put;
1511                 /* equivalent to a get of all data available */
1512 }
1513
1514
1515 /*
1516  * cypress_buf_data_avail
1517  *
1518  * Return the number of bytes of data available in the circular
1519  * buffer.
1520  */
1521
1522 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1523 {
1524         if (cb != NULL)
1525                 return (cb->buf_size + cb->buf_put - cb->buf_get)
1526                                                         % cb->buf_size;
1527         else
1528                 return 0;
1529 }
1530
1531
1532 /*
1533  * cypress_buf_space_avail
1534  *
1535  * Return the number of bytes of space available in the circular
1536  * buffer.
1537  */
1538
1539 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1540 {
1541         if (cb != NULL)
1542                 return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
1543                                                         % cb->buf_size;
1544         else
1545                 return 0;
1546 }
1547
1548
1549 /*
1550  * cypress_buf_put
1551  *
1552  * Copy data data from a user buffer and put it into the circular buffer.
1553  * Restrict to the amount of space available.
1554  *
1555  * Return the number of bytes copied.
1556  */
1557
1558 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1559         unsigned int count)
1560 {
1561
1562         unsigned int len;
1563
1564
1565         if (cb == NULL)
1566                 return 0;
1567
1568         len  = cypress_buf_space_avail(cb);
1569         if (count > len)
1570                 count = len;
1571
1572         if (count == 0)
1573                 return 0;
1574
1575         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1576         if (count > len) {
1577                 memcpy(cb->buf_put, buf, len);
1578                 memcpy(cb->buf_buf, buf+len, count - len);
1579                 cb->buf_put = cb->buf_buf + count - len;
1580         } else {
1581                 memcpy(cb->buf_put, buf, count);
1582                 if (count < len)
1583                         cb->buf_put += count;
1584                 else /* count == len */
1585                         cb->buf_put = cb->buf_buf;
1586         }
1587
1588         return count;
1589
1590 }
1591
1592
1593 /*
1594  * cypress_buf_get
1595  *
1596  * Get data from the circular buffer and copy to the given buffer.
1597  * Restrict to the amount of data available.
1598  *
1599  * Return the number of bytes copied.
1600  */
1601
1602 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1603         unsigned int count)
1604 {
1605
1606         unsigned int len;
1607
1608
1609         if (cb == NULL)
1610                 return 0;
1611
1612         len = cypress_buf_data_avail(cb);
1613         if (count > len)
1614                 count = len;
1615
1616         if (count == 0)
1617                 return 0;
1618
1619         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1620         if (count > len) {
1621                 memcpy(buf, cb->buf_get, len);
1622                 memcpy(buf+len, cb->buf_buf, count - len);
1623                 cb->buf_get = cb->buf_buf + count - len;
1624         } else {
1625                 memcpy(buf, cb->buf_get, count);
1626                 if (count < len)
1627                         cb->buf_get += count;
1628                 else /* count == len */
1629                         cb->buf_get = cb->buf_buf;
1630         }
1631
1632         return count;
1633
1634 }
1635
1636 /*****************************************************************************
1637  * Module functions
1638  *****************************************************************************/
1639
1640 static int __init cypress_init(void)
1641 {
1642         int retval;
1643
1644         dbg("%s", __func__);
1645
1646         retval = usb_serial_register(&cypress_earthmate_device);
1647         if (retval)
1648                 goto failed_em_register;
1649         retval = usb_serial_register(&cypress_hidcom_device);
1650         if (retval)
1651                 goto failed_hidcom_register;
1652         retval = usb_serial_register(&cypress_ca42v2_device);
1653         if (retval)
1654                 goto failed_ca42v2_register;
1655         retval = usb_register(&cypress_driver);
1656         if (retval)
1657                 goto failed_usb_register;
1658
1659         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1660                DRIVER_DESC "\n");
1661         return 0;
1662
1663 failed_usb_register:
1664         usb_serial_deregister(&cypress_ca42v2_device);
1665 failed_ca42v2_register:
1666         usb_serial_deregister(&cypress_hidcom_device);
1667 failed_hidcom_register:
1668         usb_serial_deregister(&cypress_earthmate_device);
1669 failed_em_register:
1670         return retval;
1671 }
1672
1673
1674 static void __exit cypress_exit(void)
1675 {
1676         dbg("%s", __func__);
1677
1678         usb_deregister(&cypress_driver);
1679         usb_serial_deregister(&cypress_earthmate_device);
1680         usb_serial_deregister(&cypress_hidcom_device);
1681         usb_serial_deregister(&cypress_ca42v2_device);
1682 }
1683
1684
1685 module_init(cypress_init);
1686 module_exit(cypress_exit);
1687
1688 MODULE_AUTHOR(DRIVER_AUTHOR);
1689 MODULE_DESCRIPTION(DRIVER_DESC);
1690 MODULE_VERSION(DRIVER_VERSION);
1691 MODULE_LICENSE("GPL");
1692
1693 module_param(debug, bool, S_IRUGO | S_IWUSR);
1694 MODULE_PARM_DESC(debug, "Debug enabled or not");
1695 module_param(stats, bool, S_IRUGO | S_IWUSR);
1696 MODULE_PARM_DESC(stats, "Enable statistics or not");
1697 module_param(interval, int, S_IRUGO | S_IWUSR);
1698 MODULE_PARM_DESC(interval, "Overrides interrupt interval");