drivers/usb/dwc3/gadget.c

   1 /**
   2  * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
   3  *
   4  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
   5  *
   6  * Authors: Felipe Balbi <balbi@ti.com>,
   7  *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
   8  *
   9  * Redistribution and use in source and binary forms, with or without
  10  * modification, are permitted provided that the following conditions
  11  * are met:
  12  * 1. Redistributions of source code must retain the above copyright
  13  *    notice, this list of conditions, and the following disclaimer,
  14  *    without modification.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  * 3. The names of the above-listed copyright holders may not be used
  19  *    to endorse or promote products derived from this software without
  20  *    specific prior written permission.
  21  *
  22  * ALTERNATIVELY, this software may be distributed under the terms of the
  23  * GNU General Public License ("GPL") version 2, as published by the Free
  24  * Software Foundation.
  25  *
  26  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  27  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  28  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  29  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  30  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  31  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  32  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  33  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  34  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  35  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  36  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  37  */
  38
  39 #include <linux/kernel.h>
  40 #include <linux/delay.h>
  41 #include <linux/slab.h>
  42 #include <linux/spinlock.h>
  43 #include <linux/platform_device.h>
  44 #include <linux/pm_runtime.h>
  45 #include <linux/interrupt.h>
  46 #include <linux/io.h>
  47 #include <linux/list.h>
  48 #include <linux/dma-mapping.h>
  49
  50 #include <linux/usb/ch9.h>
  51 #include <linux/usb/gadget.h>
  52
  53 #include "core.h"
  54 #include "gadget.h"
  55 #include "io.h"
  56
  57 /**
  58  * dwc3_gadget_set_test_mode - Enables USB2 Test Modes
  59  * @dwc: pointer to our context structure
  60  * @mode: the mode to set (J, K SE0 NAK, Force Enable)
  61  *
  62  * Caller should take care of locking. This function will
  63  * return 0 on success or -EINVAL if wrong Test Selector
  64  * is passed
  65  */
  66 int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
  67 {
  68         u32             reg;
  69
  70         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
  71         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
  72
  73         switch (mode) {
  74         case TEST_J:
  75         case TEST_K:
  76         case TEST_SE0_NAK:
  77         case TEST_PACKET:
  78         case TEST_FORCE_EN:
  79                 reg |= mode << 1;
  80                 break;
  81         default:
  82                 return -EINVAL;
  83         }
  84
  85         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
  86
  87         return 0;
  88 }
  89
  90 /**
  91  * dwc3_gadget_set_link_state - Sets USB Link to a particular State
  92  * @dwc: pointer to our context structure
  93  * @state: the state to put link into
  94  *
  95  * Caller should take care of locking. This function will
  96  * return 0 on success or -ETIMEDOUT.
  97  */
  98 int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
  99 {
 100         int             retries = 10000;
 101         u32             reg;
 102
 103         /*
 104          * Wait until device controller is ready. Only applies to 1.94a and
 105          * later RTL.
 106          */
 107         if (dwc->revision >= DWC3_REVISION_194A) {
 108                 while (--retries) {
 109                         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 110                         if (reg & DWC3_DSTS_DCNRD)
 111                                 udelay(5);
 112                         else
 113                                 break;
 114                 }
 115
 116                 if (retries <= 0)
 117                         return -ETIMEDOUT;
 118         }
 119
 120         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 121         reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
 122
 123         /* set requested state */
 124         reg |= DWC3_DCTL_ULSTCHNGREQ(state);
 125         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 126
 127         /*
 128          * The following code is racy when called from dwc3_gadget_wakeup,
 129          * and is not needed, at least on newer versions
 130          */
 131         if (dwc->revision >= DWC3_REVISION_194A)
 132                 return 0;
 133
 134         /* wait for a change in DSTS */
 135         retries = 10000;
 136         while (--retries) {
 137                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 138
 139                 if (DWC3_DSTS_USBLNKST(reg) == state)
 140                         return 0;
 141
 142                 udelay(5);
 143         }
 144
 145         dev_vdbg(dwc->dev, "link state change request timed out\n");
 146
 147         return -ETIMEDOUT;
 148 }
 149
 150 /**
 151  * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
 152  * @dwc: pointer to our context structure
 153  *
 154  * This function will a best effort FIFO allocation in order
 155  * to improve FIFO usage and throughput, while still allowing
 156  * us to enable as many endpoints as possible.
 157  *
 158  * Keep in mind that this operation will be highly dependent
 159  * on the configured size for RAM1 - which contains TxFifo -,
 160  * the amount of endpoints enabled on coreConsultant tool, and
 161  * the width of the Master Bus.
 162  *
 163  * In the ideal world, we would always be able to satisfy the
 164  * following equation:
 165  *
 166  * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
 167  * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
 168  *
 169  * Unfortunately, due to many variables that's not always the case.
 170  */
 171 int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
 172 {
 173         int             last_fifo_depth = 0;
 174         int             ram1_depth;
 175         int             fifo_size;
 176         int             mdwidth;
 177         int             num;
 178
 179         if (!dwc->needs_fifo_resize)
 180                 return 0;
 181
 182         ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
 183         mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
 184
 185         /* MDWIDTH is represented in bits, we need it in bytes */
 186         mdwidth >>= 3;
 187
 188         /*
 189          * FIXME For now we will only allocate 1 wMaxPacketSize space
 190          * for each enabled endpoint, later patches will come to
 191          * improve this algorithm so that we better use the internal
 192          * FIFO space
 193          */
 194         for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
 195                 struct dwc3_ep  *dep = dwc->eps[num];
 196                 int             fifo_number = dep->number >> 1;
 197                 int             mult = 1;
 198                 int             tmp;
 199
 200                 if (!(dep->number & 1))
 201                         continue;
 202
 203                 if (!(dep->flags & DWC3_EP_ENABLED))
 204                         continue;
 205
 206                 if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
 207                                 || usb_endpoint_xfer_isoc(dep->endpoint.desc))
 208                         mult = 3;
 209
 210                 /*
 211                  * REVISIT: the following assumes we will always have enough
 212                  * space available on the FIFO RAM for all possible use cases.
 213                  * Make sure that's true somehow and change FIFO allocation
 214                  * accordingly.
 215                  *
 216                  * If we have Bulk or Isochronous endpoints, we want
 217                  * them to be able to be very, very fast. So we're giving
 218                  * those endpoints a fifo_size which is enough for 3 full
 219                  * packets
 220                  */
 221                 tmp = mult * (dep->endpoint.maxpacket + mdwidth);
 222                 tmp += mdwidth;
 223
 224                 fifo_size = DIV_ROUND_UP(tmp, mdwidth);
 225
 226                 fifo_size |= (last_fifo_depth << 16);
 227
 228                 dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
 229                                 dep->name, last_fifo_depth, fifo_size & 0xffff);
 230
 231                 dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
 232                                 fifo_size);
 233
 234                 last_fifo_depth += (fifo_size & 0xffff);
 235         }
 236
 237         return 0;
 238 }
 239
 240 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 241                 int status)
 242 {
 243         struct dwc3                     *dwc = dep->dwc;
 244         int                             i;
 245
 246         if (req->queued) {
 247                 i = 0;
 248                 do {
 249                         dep->busy_slot++;
 250                         /*
 251                          * Skip LINK TRB. We can't use req->trb and check for
 252                          * DWC3_TRBCTL_LINK_TRB because it points the TRB we
 253                          * just completed (not the LINK TRB).
 254                          */
 255                         if (((dep->busy_slot & DWC3_TRB_MASK) ==
 256                                 DWC3_TRB_NUM- 1) &&
 257                                 usb_endpoint_xfer_isoc(dep->endpoint.desc))
 258                                 dep->busy_slot++;
 259                 } while(++i < req->request.num_mapped_sgs);
 260                 req->queued = false;
 261         }
 262         list_del(&req->list);
 263         req->trb = NULL;
 264
 265         if (req->request.status == -EINPROGRESS)
 266                 req->request.status = status;
 267
 268         if (dwc->ep0_bounced && dep->number == 0)
 269                 dwc->ep0_bounced = false;
 270         else
 271                 usb_gadget_unmap_request(&dwc->gadget, &req->request,
 272                                 req->direction);
 273
 274         dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
 275                         req, dep->name, req->request.actual,
 276                         req->request.length, status);
 277
 278         spin_unlock(&dwc->lock);
 279         req->request.complete(&dep->endpoint, &req->request);
 280         spin_lock(&dwc->lock);
 281 }
 282
 283 static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
 284 {
 285         switch (cmd) {
 286         case DWC3_DEPCMD_DEPSTARTCFG:
 287                 return "Start New Configuration";
 288         case DWC3_DEPCMD_ENDTRANSFER:
 289                 return "End Transfer";
 290         case DWC3_DEPCMD_UPDATETRANSFER:
 291                 return "Update Transfer";
 292         case DWC3_DEPCMD_STARTTRANSFER:
 293                 return "Start Transfer";
 294         case DWC3_DEPCMD_CLEARSTALL:
 295                 return "Clear Stall";
 296         case DWC3_DEPCMD_SETSTALL:
 297                 return "Set Stall";
 298         case DWC3_DEPCMD_GETEPSTATE:
 299                 return "Get Endpoint State";
 300         case DWC3_DEPCMD_SETTRANSFRESOURCE:
 301                 return "Set Endpoint Transfer Resource";
 302         case DWC3_DEPCMD_SETEPCONFIG:
 303                 return "Set Endpoint Configuration";
 304         default:
 305                 return "UNKNOWN command";
 306         }
 307 }
 308
 309 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param)
 310 {
 311         u32             timeout = 500;
 312         u32             reg;
 313
 314         dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
 315         dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
 316
 317         do {
 318                 reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
 319                 if (!(reg & DWC3_DGCMD_CMDACT)) {
 320                         dev_vdbg(dwc->dev, "Command Complete --> %d\n",
 321                                         DWC3_DGCMD_STATUS(reg));
 322                         return 0;
 323                 }
 324
 325                 /*
 326                  * We can't sleep here, because it's also called from
 327                  * interrupt context.
 328                  */
 329                 timeout--;
 330                 if (!timeout)
 331                         return -ETIMEDOUT;
 332                 udelay(1);
 333         } while (1);
 334 }
 335
 336 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 337                 unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
 338 {
 339         struct dwc3_ep          *dep = dwc->eps[ep];
 340         u32                     timeout = 500;
 341         u32                     reg;
 342
 343         dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
 344                         dep->name,
 345                         dwc3_gadget_ep_cmd_string(cmd), params->param0,
 346                         params->param1, params->param2);
 347
 348         dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
 349         dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
 350         dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
 351
 352         dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
 353         do {
 354                 reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
 355                 if (!(reg & DWC3_DEPCMD_CMDACT)) {
 356                         dev_vdbg(dwc->dev, "Command Complete --> %d\n",
 357                                         DWC3_DEPCMD_STATUS(reg));
 358                         return 0;
 359                 }
 360
 361                 /*
 362                  * We can't sleep here, because it is also called from
 363                  * interrupt context.
 364                  */
 365                 timeout--;
 366                 if (!timeout)
 367                         return -ETIMEDOUT;
 368
 369                 udelay(1);
 370         } while (1);
 371 }
 372
 373 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
 374                 struct dwc3_trb *trb)
 375 {
 376         u32             offset = (char *) trb - (char *) dep->trb_pool;
 377
 378         return dep->trb_pool_dma + offset;
 379 }
 380
 381 static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
 382 {
 383         struct dwc3             *dwc = dep->dwc;
 384
 385         if (dep->trb_pool)
 386                 return 0;
 387
 388         if (dep->number == 0 || dep->number == 1)
 389                 return 0;
 390
 391         dep->trb_pool = dma_alloc_coherent(dwc->dev,
 392                         sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
 393                         &dep->trb_pool_dma, GFP_KERNEL);
 394         if (!dep->trb_pool) {
 395                 dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
 396                                 dep->name);
 397                 return -ENOMEM;
 398         }
 399
 400         return 0;
 401 }
 402
 403 static void dwc3_free_trb_pool(struct dwc3_ep *dep)
 404 {
 405         struct dwc3             *dwc = dep->dwc;
 406
 407         dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
 408                         dep->trb_pool, dep->trb_pool_dma);
 409
 410         dep->trb_pool = NULL;
 411         dep->trb_pool_dma = 0;
 412 }
 413
 414 static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 415 {
 416         struct dwc3_gadget_ep_cmd_params params;
 417         u32                     cmd;
 418
 419         memset(&params, 0x00, sizeof(params));
 420
 421         if (dep->number != 1) {
 422                 cmd = DWC3_DEPCMD_DEPSTARTCFG;
 423                 /* XferRscIdx == 0 for ep0 and 2 for the remaining */
 424                 if (dep->number > 1) {
 425                         if (dwc->start_config_issued)
 426                                 return 0;
 427                         dwc->start_config_issued = true;
 428                         cmd |= DWC3_DEPCMD_PARAM(2);
 429                 }
 430
 431                 return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
 432         }
 433
 434         return 0;
 435 }
 436
 437 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 438                 const struct usb_endpoint_descriptor *desc,
 439                 const struct usb_ss_ep_comp_descriptor *comp_desc,
 440                 bool ignore)
 441 {
 442         struct dwc3_gadget_ep_cmd_params params;
 443
 444         memset(&params, 0x00, sizeof(params));
 445
 446         params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
 447                 | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
 448
 449         /* Burst size is only needed in SuperSpeed mode */
 450         if (dwc->gadget.speed == USB_SPEED_SUPER) {
 451                 u32 burst = dep->endpoint.maxburst - 1;
 452
 453                 params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
 454         }
 455
 456         if (ignore)
 457                 params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
 458
 459         params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
 460                 | DWC3_DEPCFG_XFER_NOT_READY_EN;
 461
 462         if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
 463                 params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
 464                         | DWC3_DEPCFG_STREAM_EVENT_EN;
 465                 dep->stream_capable = true;
 466         }
 467
 468         if (usb_endpoint_xfer_isoc(desc))
 469                 params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
 470
 471         /*
 472          * We are doing 1:1 mapping for endpoints, meaning
 473          * Physical Endpoints 2 maps to Logical Endpoint 2 and
 474          * so on. We consider the direction bit as part of the physical
 475          * endpoint number. So USB endpoint 0x81 is 0x03.
 476          */
 477         params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
 478
 479         /*
 480          * We must use the lower 16 TX FIFOs even though
 481          * HW might have more
 482          */
 483         if (dep->direction)
 484                 params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
 485
 486         if (desc->bInterval) {
 487                 params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
 488                 dep->interval = 1 << (desc->bInterval - 1);
 489         }
 490
 491         return dwc3_send_gadget_ep_cmd(dwc, dep->number,
 492                         DWC3_DEPCMD_SETEPCONFIG, &params);
 493 }
 494
 495 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 496 {
 497         struct dwc3_gadget_ep_cmd_params params;
 498
 499         memset(&params, 0x00, sizeof(params));
 500
 501         params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 502
 503         return dwc3_send_gadget_ep_cmd(dwc, dep->number,
 504                         DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
 505 }
 506
 507 /**
 508  * __dwc3_gadget_ep_enable - Initializes a HW endpoint
 509  * @dep: endpoint to be initialized
 510  * @desc: USB Endpoint Descriptor
 511  *
 512  * Caller should take care of locking
 513  */
 514 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 515                 const struct usb_endpoint_descriptor *desc,
 516                 const struct usb_ss_ep_comp_descriptor *comp_desc,
 517                 bool ignore)
 518 {
 519         struct dwc3             *dwc = dep->dwc;
 520         u32                     reg;
 521         int                     ret = -ENOMEM;
 522
 523         if (!(dep->flags & DWC3_EP_ENABLED)) {
 524                 ret = dwc3_gadget_start_config(dwc, dep);
 525                 if (ret)
 526                         return ret;
 527         }
 528
 529         ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore);
 530         if (ret)
 531                 return ret;
 532
 533         if (!(dep->flags & DWC3_EP_ENABLED)) {
 534                 struct dwc3_trb *trb_st_hw;
 535                 struct dwc3_trb *trb_link;
 536
 537                 ret = dwc3_gadget_set_xfer_resource(dwc, dep);
 538                 if (ret)
 539                         return ret;
 540
 541                 dep->endpoint.desc = desc;
 542                 dep->comp_desc = comp_desc;
 543                 dep->type = usb_endpoint_type(desc);
 544                 dep->flags |= DWC3_EP_ENABLED;
 545
 546                 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 547                 reg |= DWC3_DALEPENA_EP(dep->number);
 548                 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 549
 550                 if (!usb_endpoint_xfer_isoc(desc))
 551                         return 0;
 552
 553                 memset(&trb_link, 0, sizeof(trb_link));
 554
 555                 /* Link TRB for ISOC. The HWO bit is never reset */
 556                 trb_st_hw = &dep->trb_pool[0];
 557
 558                 trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
 559
 560                 trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 561                 trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 562                 trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
 563                 trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
 564         }
 565
 566         return 0;
 567 }
 568
 569 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
 570 static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
 571 {
 572         struct dwc3_request             *req;
 573
 574         if (!list_empty(&dep->req_queued)) {
 575                 dwc3_stop_active_transfer(dwc, dep->number);
 576
 577                 /* - giveback all requests to gadget driver */
 578                 while (!list_empty(&dep->req_queued)) {
 579                         req = next_request(&dep->req_queued);
 580
 581                         dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 582                 }
 583         }
 584
 585         while (!list_empty(&dep->request_list)) {
 586                 req = next_request(&dep->request_list);
 587
 588                 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 589         }
 590 }
 591
 592 /**
 593  * __dwc3_gadget_ep_disable - Disables a HW endpoint
 594  * @dep: the endpoint to disable
 595  *
 596  * This function also removes requests which are currently processed ny the
 597  * hardware and those which are not yet scheduled.
 598  * Caller should take care of locking.
 599  */
 600 static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 601 {
 602         struct dwc3             *dwc = dep->dwc;
 603         u32                     reg;
 604
 605         dwc3_remove_requests(dwc, dep);
 606
 607         reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 608         reg &= ~DWC3_DALEPENA_EP(dep->number);
 609         dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 610
 611         dep->stream_capable = false;
 612         dep->endpoint.desc = NULL;
 613         dep->comp_desc = NULL;
 614         dep->type = 0;
 615         dep->flags = 0;
 616
 617         return 0;
 618 }
 619
 620 /* -------------------------------------------------------------------------- */
 621
 622 static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
 623                 const struct usb_endpoint_descriptor *desc)
 624 {
 625         return -EINVAL;
 626 }
 627
 628 static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
 629 {
 630         return -EINVAL;
 631 }
 632
 633 /* -------------------------------------------------------------------------- */
 634
 635 static int dwc3_gadget_ep_enable(struct usb_ep *ep,
 636                 const struct usb_endpoint_descriptor *desc)
 637 {
 638         struct dwc3_ep                  *dep;
 639         struct dwc3                     *dwc;
 640         unsigned long                   flags;
 641         int                             ret;
 642
 643         if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
 644                 pr_debug("dwc3: invalid parameters\n");
 645                 return -EINVAL;
 646         }
 647
 648         if (!desc->wMaxPacketSize) {
 649                 pr_debug("dwc3: missing wMaxPacketSize\n");
 650                 return -EINVAL;
 651         }
 652
 653         dep = to_dwc3_ep(ep);
 654         dwc = dep->dwc;
 655
 656         if (dep->flags & DWC3_EP_ENABLED) {
 657                 dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
 658                                 dep->name);
 659                 return 0;
 660         }
 661
 662         switch (usb_endpoint_type(desc)) {
 663         case USB_ENDPOINT_XFER_CONTROL:
 664                 strlcat(dep->name, "-control", sizeof(dep->name));
 665                 break;
 666         case USB_ENDPOINT_XFER_ISOC:
 667                 strlcat(dep->name, "-isoc", sizeof(dep->name));
 668                 break;
 669         case USB_ENDPOINT_XFER_BULK:
 670                 strlcat(dep->name, "-bulk", sizeof(dep->name));
 671                 break;
 672         case USB_ENDPOINT_XFER_INT:
 673                 strlcat(dep->name, "-int", sizeof(dep->name));
 674                 break;
 675         default:
 676                 dev_err(dwc->dev, "invalid endpoint transfer type\n");
 677         }
 678
 679         dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
 680
 681         spin_lock_irqsave(&dwc->lock, flags);
 682         ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false);
 683         spin_unlock_irqrestore(&dwc->lock, flags);
 684
 685         return ret;
 686 }
 687
 688 static int dwc3_gadget_ep_disable(struct usb_ep *ep)
 689 {
 690         struct dwc3_ep                  *dep;
 691         struct dwc3                     *dwc;
 692         unsigned long                   flags;
 693         int                             ret;
 694
 695         if (!ep) {
 696                 pr_debug("dwc3: invalid parameters\n");
 697                 return -EINVAL;
 698         }
 699
 700         dep = to_dwc3_ep(ep);
 701         dwc = dep->dwc;
 702
 703         if (!(dep->flags & DWC3_EP_ENABLED)) {
 704                 dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
 705                                 dep->name);
 706                 return 0;
 707         }
 708
 709         snprintf(dep->name, sizeof(dep->name), "ep%d%s",
 710                         dep->number >> 1,
 711                         (dep->number & 1) ? "in" : "out");
 712
 713         spin_lock_irqsave(&dwc->lock, flags);
 714         ret = __dwc3_gadget_ep_disable(dep);
 715         spin_unlock_irqrestore(&dwc->lock, flags);
 716
 717         return ret;
 718 }
 719
 720 static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
 721         gfp_t gfp_flags)
 722 {
 723         struct dwc3_request             *req;
 724         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 725         struct dwc3                     *dwc = dep->dwc;
 726
 727         req = kzalloc(sizeof(*req), gfp_flags);
 728         if (!req) {
 729                 dev_err(dwc->dev, "not enough memory\n");
 730                 return NULL;
 731         }
 732
 733         req->epnum      = dep->number;
 734         req->dep        = dep;
 735
 736         return &req->request;
 737 }
 738
 739 static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 740                 struct usb_request *request)
 741 {
 742         struct dwc3_request             *req = to_dwc3_request(request);
 743
 744         kfree(req);
 745 }
 746
 747 /**
 748  * dwc3_prepare_one_trb - setup one TRB from one request
 749  * @dep: endpoint for which this request is prepared
 750  * @req: dwc3_request pointer
 751  */
 752 static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 753                 struct dwc3_request *req, dma_addr_t dma,
 754                 unsigned length, unsigned last, unsigned chain, unsigned node)
 755 {
 756         struct dwc3             *dwc = dep->dwc;
 757         struct dwc3_trb         *trb;
 758
 759         dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
 760                         dep->name, req, (unsigned long long) dma,
 761                         length, last ? " last" : "",
 762                         chain ? " chain" : "");
 763
 764         /* Skip the LINK-TRB on ISOC */
 765         if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
 766                         usb_endpoint_xfer_isoc(dep->endpoint.desc))
 767                 dep->free_slot++;
 768
 769         trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
 770
 771         if (!req->trb) {
 772                 dwc3_gadget_move_request_queued(req);
 773                 req->trb = trb;
 774                 req->trb_dma = dwc3_trb_dma_offset(dep, trb);
 775                 req->start_slot = dep->free_slot & DWC3_TRB_MASK;
 776         }
 777
 778         dep->free_slot++;
 779
 780         trb->size = DWC3_TRB_SIZE_LENGTH(length);
 781         trb->bpl = lower_32_bits(dma);
 782         trb->bph = upper_32_bits(dma);
 783
 784         switch (usb_endpoint_type(dep->endpoint.desc)) {
 785         case USB_ENDPOINT_XFER_CONTROL:
 786                 trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
 787                 break;
 788
 789         case USB_ENDPOINT_XFER_ISOC:
 790                 if (!node)
 791                         trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
 792                 else
 793                         trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
 794
 795                 if (!req->request.no_interrupt && !chain)
 796                         trb->ctrl |= DWC3_TRB_CTRL_IOC;
 797                 break;
 798
 799         case USB_ENDPOINT_XFER_BULK:
 800         case USB_ENDPOINT_XFER_INT:
 801                 trb->ctrl = DWC3_TRBCTL_NORMAL;
 802                 break;
 803         default:
 804                 /*
 805                  * This is only possible with faulty memory because we
 806                  * checked it already :)
 807                  */
 808                 BUG();
 809         }
 810
 811         if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 812                 trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 813                 trb->ctrl |= DWC3_TRB_CTRL_CSP;
 814         } else if (last) {
 815                 trb->ctrl |= DWC3_TRB_CTRL_LST;
 816         }
 817
 818         if (chain)
 819                 trb->ctrl |= DWC3_TRB_CTRL_CHN;
 820
 821         if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
 822                 trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
 823
 824         trb->ctrl |= DWC3_TRB_CTRL_HWO;
 825 }
 826
 827 /*
 828  * dwc3_prepare_trbs - setup TRBs from requests
 829  * @dep: endpoint for which requests are being prepared
 830  * @starting: true if the endpoint is idle and no requests are queued.
 831  *
 832  * The function goes through the requests list and sets up TRBs for the
 833  * transfers. The function returns once there are no more TRBs available or
 834  * it runs out of requests.
 835  */
 836 static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 837 {
 838         struct dwc3_request     *req, *n;
 839         u32                     trbs_left;
 840         u32                     max;
 841         unsigned int            last_one = 0;
 842
 843         BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
 844
 845         /* the first request must not be queued */
 846         trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
 847
 848         /* Can't wrap around on a non-isoc EP since there's no link TRB */
 849         if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 850                 max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
 851                 if (trbs_left > max)
 852                         trbs_left = max;
 853         }
 854
 855         /*
 856          * If busy & slot are equal than it is either full or empty. If we are
 857          * starting to process requests then we are empty. Otherwise we are
 858          * full and don't do anything
 859          */
 860         if (!trbs_left) {
 861                 if (!starting)
 862                         return;
 863                 trbs_left = DWC3_TRB_NUM;
 864                 /*
 865                  * In case we start from scratch, we queue the ISOC requests
 866                  * starting from slot 1. This is done because we use ring
 867                  * buffer and have no LST bit to stop us. Instead, we place
 868                  * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
 869                  * after the first request so we start at slot 1 and have
 870                  * 7 requests proceed before we hit the first IOC.
 871                  * Other transfer types don't use the ring buffer and are
 872                  * processed from the first TRB until the last one. Since we
 873                  * don't wrap around we have to start at the beginning.
 874                  */
 875                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 876                         dep->busy_slot = 1;
 877                         dep->free_slot = 1;
 878                 } else {
 879                         dep->busy_slot = 0;
 880                         dep->free_slot = 0;
 881                 }
 882         }
 883
 884         /* The last TRB is a link TRB, not used for xfer */
 885         if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
 886                 return;
 887
 888         list_for_each_entry_safe(req, n, &dep->request_list, list) {
 889                 unsigned        length;
 890                 dma_addr_t      dma;
 891                 last_one = false;
 892
 893                 if (req->request.num_mapped_sgs > 0) {
 894                         struct usb_request *request = &req->request;
 895                         struct scatterlist *sg = request->sg;
 896                         struct scatterlist *s;
 897                         int             i;
 898
 899                         for_each_sg(sg, s, request->num_mapped_sgs, i) {
 900                                 unsigned chain = true;
 901
 902                                 length = sg_dma_len(s);
 903                                 dma = sg_dma_address(s);
 904
 905                                 if (i == (request->num_mapped_sgs - 1) ||
 906                                                 sg_is_last(s)) {
 907                                         if (list_is_last(&req->list,
 908                                                         &dep->request_list))
 909                                                 last_one = true;
 910                                         chain = false;
 911                                 }
 912
 913                                 trbs_left--;
 914                                 if (!trbs_left)
 915                                         last_one = true;
 916
 917                                 if (last_one)
 918                                         chain = false;
 919
 920                                 dwc3_prepare_one_trb(dep, req, dma, length,
 921                                                 last_one, chain, i);
 922
 923                                 if (last_one)
 924                                         break;
 925                         }
 926                 } else {
 927                         dma = req->request.dma;
 928                         length = req->request.length;
 929                         trbs_left--;
 930
 931                         if (!trbs_left)
 932                                 last_one = 1;
 933
 934                         /* Is this the last request? */
 935                         if (list_is_last(&req->list, &dep->request_list))
 936                                 last_one = 1;
 937
 938                         dwc3_prepare_one_trb(dep, req, dma, length,
 939                                         last_one, false, 0);
 940
 941                         if (last_one)
 942                                 break;
 943                 }
 944         }
 945 }
 946
 947 static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 948                 int start_new)
 949 {
 950         struct dwc3_gadget_ep_cmd_params params;
 951         struct dwc3_request             *req;
 952         struct dwc3                     *dwc = dep->dwc;
 953         int                             ret;
 954         u32                             cmd;
 955
 956         if (start_new && (dep->flags & DWC3_EP_BUSY)) {
 957                 dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
 958                 return -EBUSY;
 959         }
 960         dep->flags &= ~DWC3_EP_PENDING_REQUEST;
 961
 962         /*
 963          * If we are getting here after a short-out-packet we don't enqueue any
 964          * new requests as we try to set the IOC bit only on the last request.
 965          */
 966         if (start_new) {
 967                 if (list_empty(&dep->req_queued))
 968                         dwc3_prepare_trbs(dep, start_new);
 969
 970                 /* req points to the first request which will be sent */
 971                 req = next_request(&dep->req_queued);
 972         } else {
 973                 dwc3_prepare_trbs(dep, start_new);
 974
 975                 /*
 976                  * req points to the first request where HWO changed from 0 to 1
 977                  */
 978                 req = next_request(&dep->req_queued);
 979         }
 980         if (!req) {
 981                 dep->flags |= DWC3_EP_PENDING_REQUEST;
 982                 return 0;
 983         }
 984
 985         memset(&params, 0, sizeof(params));
 986
 987         if (start_new) {
 988                 params.param0 = upper_32_bits(req->trb_dma);
 989                 params.param1 = lower_32_bits(req->trb_dma);
 990                 cmd = DWC3_DEPCMD_STARTTRANSFER;
 991         } else {
 992                 cmd = DWC3_DEPCMD_UPDATETRANSFER;
 993         }
 994
 995         cmd |= DWC3_DEPCMD_PARAM(cmd_param);
 996         ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
 997         if (ret < 0) {
 998                 dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
 999
1000                 /*
1001                  * FIXME we need to iterate over the list of requests
1002                  * here and stop, unmap, free and del each of the linked
1003                  * requests instead of what we do now.
1004                  */
1005                 usb_gadget_unmap_request(&dwc->gadget, &req->request,
1006                                 req->direction);
1007                 list_del(&req->list);
1008                 return ret;
1009         }
1010
1011         dep->flags |= DWC3_EP_BUSY;
1012
1013         if (start_new) {
1014                 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
1015                                 dep->number);
1016                 WARN_ON_ONCE(!dep->resource_index);
1017         }
1018
1019         return 0;
1020 }
1021
1022 static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
1023                 struct dwc3_ep *dep, u32 cur_uf)
1024 {
1025         u32 uf;
1026
1027         if (list_empty(&dep->request_list)) {
1028                 dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
1029                         dep->name);
1030                 dep->flags |= DWC3_EP_PENDING_REQUEST;
1031                 return;
1032         }
1033
1034         /* 4 micro frames in the future */
1035         uf = cur_uf + dep->interval * 4;
1036
1037         __dwc3_gadget_kick_transfer(dep, uf, 1);
1038 }
1039
1040 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
1041                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
1042 {
1043         u32 cur_uf, mask;
1044
1045         mask = ~(dep->interval - 1);
1046         cur_uf = event->parameters & mask;
1047
1048         __dwc3_gadget_start_isoc(dwc, dep, cur_uf);
1049 }
1050
1051 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
1052 {
1053         struct dwc3             *dwc = dep->dwc;
1054         int                     ret;
1055
1056         req->request.actual     = 0;
1057         req->request.status     = -EINPROGRESS;
1058         req->direction          = dep->direction;
1059         req->epnum              = dep->number;
1060
1061         /*
1062          * We only add to our list of requests now and
1063          * start consuming the list once we get XferNotReady
1064          * IRQ.
1065          *
1066          * That way, we avoid doing anything that we don't need
1067          * to do now and defer it until the point we receive a
1068          * particular token from the Host side.
1069          *
1070          * This will also avoid Host cancelling URBs due to too
1071          * many NAKs.
1072          */
1073         ret = usb_gadget_map_request(&dwc->gadget, &req->request,
1074                         dep->direction);
1075         if (ret)
1076                 return ret;
1077
1078         list_add_tail(&req->list, &dep->request_list);
1079
1080         /*
1081          * There are a few special cases:
1082          *
1083          * 1. XferNotReady with empty list of requests. We need to kick the
1084          *    transfer here in that situation, otherwise we will be NAKing
1085          *    forever. If we get XferNotReady before gadget driver has a
1086          *    chance to queue a request, we will ACK the IRQ but won't be
1087          *    able to receive the data until the next request is queued.
1088          *    The following code is handling exactly that.
1089          *
1090          */
1091         if (dep->flags & DWC3_EP_PENDING_REQUEST) {
1092                 /*
1093                  * If xfernotready is already elapsed and it is a case
1094                  * of isoc transfer, then issue END TRANSFER, so that
1095                  * you can receive xfernotready again and can have
1096                  * notion of current microframe.
1097                  */
1098                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1099                         if (list_empty(&dep->req_queued)) {
1100                                 dwc3_stop_active_transfer(dwc, dep->number);
1101                                 dep->flags = DWC3_EP_ENABLED;
1102                         }
1103                         return 0;
1104                 }
1105
1106                 ret = __dwc3_gadget_kick_transfer(dep, 0, true);
1107                 if (ret && ret != -EBUSY)
1108                         dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1109                                         dep->name);
1110                 return ret;
1111         }
1112
1113         /*
1114          * 2. XferInProgress on Isoc EP with an active transfer. We need to
1115          *    kick the transfer here after queuing a request, otherwise the
1116          *    core may not see the modified TRB(s).
1117          */
1118         if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
1119                         (dep->flags & DWC3_EP_BUSY) &&
1120                         !(dep->flags & DWC3_EP_MISSED_ISOC)) {
1121                 WARN_ON_ONCE(!dep->resource_index);
1122                 ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
1123                                 false);
1124                 if (ret && ret != -EBUSY)
1125                         dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1126                                         dep->name);
1127                 return ret;
1128         }
1129
1130         return 0;
1131 }
1132
1133 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
1134         gfp_t gfp_flags)
1135 {
1136         struct dwc3_request             *req = to_dwc3_request(request);
1137         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1138         struct dwc3                     *dwc = dep->dwc;
1139
1140         unsigned long                   flags;
1141
1142         int                             ret;
1143
1144         if (!dep->endpoint.desc) {
1145                 dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
1146                                 request, ep->name);
1147                 return -ESHUTDOWN;
1148         }
1149
1150         dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
1151                         request, ep->name, request->length);
1152
1153         spin_lock_irqsave(&dwc->lock, flags);
1154         ret = __dwc3_gadget_ep_queue(dep, req);
1155         spin_unlock_irqrestore(&dwc->lock, flags);
1156
1157         return ret;
1158 }
1159
1160 static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
1161                 struct usb_request *request)
1162 {
1163         struct dwc3_request             *req = to_dwc3_request(request);
1164         struct dwc3_request             *r = NULL;
1165
1166         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1167         struct dwc3                     *dwc = dep->dwc;
1168
1169         unsigned long                   flags;
1170         int                             ret = 0;
1171
1172         spin_lock_irqsave(&dwc->lock, flags);
1173
1174         list_for_each_entry(r, &dep->request_list, list) {
1175                 if (r == req)
1176                         break;
1177         }
1178
1179         if (r != req) {
1180                 list_for_each_entry(r, &dep->req_queued, list) {
1181                         if (r == req)
1182                                 break;
1183                 }
1184                 if (r == req) {
1185                         /* wait until it is processed */
1186                         dwc3_stop_active_transfer(dwc, dep->number);
1187                         goto out1;
1188                 }
1189                 dev_err(dwc->dev, "request %p was not queued to %s\n",
1190                                 request, ep->name);
1191                 ret = -EINVAL;
1192                 goto out0;
1193         }
1194
1195 out1:
1196         /* giveback the request */
1197         dwc3_gadget_giveback(dep, req, -ECONNRESET);
1198
1199 out0:
1200         spin_unlock_irqrestore(&dwc->lock, flags);
1201
1202         return ret;
1203 }
1204
1205 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
1206 {
1207         struct dwc3_gadget_ep_cmd_params        params;
1208         struct dwc3                             *dwc = dep->dwc;
1209         int                                     ret;
1210
1211         memset(&params, 0x00, sizeof(params));
1212
1213         if (value) {
1214                 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1215                         DWC3_DEPCMD_SETSTALL, &params);
1216                 if (ret)
1217                         dev_err(dwc->dev, "failed to %s STALL on %s\n",
1218                                         value ? "set" : "clear",
1219                                         dep->name);
1220                 else
1221                         dep->flags |= DWC3_EP_STALL;
1222         } else {
1223                 if (dep->flags & DWC3_EP_WEDGE)
1224                         return 0;
1225
1226                 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1227                         DWC3_DEPCMD_CLEARSTALL, &params);
1228                 if (ret)
1229                         dev_err(dwc->dev, "failed to %s STALL on %s\n",
1230                                         value ? "set" : "clear",
1231                                         dep->name);
1232                 else
1233                         dep->flags &= ~DWC3_EP_STALL;
1234         }
1235
1236         return ret;
1237 }
1238
1239 static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
1240 {
1241         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1242         struct dwc3                     *dwc = dep->dwc;
1243
1244         unsigned long                   flags;
1245
1246         int                             ret;
1247
1248         spin_lock_irqsave(&dwc->lock, flags);
1249
1250         if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1251                 dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
1252                 ret = -EINVAL;
1253                 goto out;
1254         }
1255
1256         ret = __dwc3_gadget_ep_set_halt(dep, value);
1257 out:
1258         spin_unlock_irqrestore(&dwc->lock, flags);
1259
1260         return ret;
1261 }
1262
1263 static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
1264 {
1265         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1266         struct dwc3                     *dwc = dep->dwc;
1267         unsigned long                   flags;
1268
1269         spin_lock_irqsave(&dwc->lock, flags);
1270         dep->flags |= DWC3_EP_WEDGE;
1271         spin_unlock_irqrestore(&dwc->lock, flags);
1272
1273         if (dep->number == 0 || dep->number == 1)
1274                 return dwc3_gadget_ep0_set_halt(ep, 1);
1275         else
1276                 return dwc3_gadget_ep_set_halt(ep, 1);
1277 }
1278
1279 /* -------------------------------------------------------------------------- */
1280
1281 static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
1282         .bLength        = USB_DT_ENDPOINT_SIZE,
1283         .bDescriptorType = USB_DT_ENDPOINT,
1284         .bmAttributes   = USB_ENDPOINT_XFER_CONTROL,
1285 };
1286
1287 static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
1288         .enable         = dwc3_gadget_ep0_enable,
1289         .disable        = dwc3_gadget_ep0_disable,
1290         .alloc_request  = dwc3_gadget_ep_alloc_request,
1291         .free_request   = dwc3_gadget_ep_free_request,
1292         .queue          = dwc3_gadget_ep0_queue,
1293         .dequeue        = dwc3_gadget_ep_dequeue,
1294         .set_halt       = dwc3_gadget_ep0_set_halt,
1295         .set_wedge      = dwc3_gadget_ep_set_wedge,
1296 };
1297
1298 static const struct usb_ep_ops dwc3_gadget_ep_ops = {
1299         .enable         = dwc3_gadget_ep_enable,
1300         .disable        = dwc3_gadget_ep_disable,
1301         .alloc_request  = dwc3_gadget_ep_alloc_request,
1302         .free_request   = dwc3_gadget_ep_free_request,
1303         .queue          = dwc3_gadget_ep_queue,
1304         .dequeue        = dwc3_gadget_ep_dequeue,
1305         .set_halt       = dwc3_gadget_ep_set_halt,
1306         .set_wedge      = dwc3_gadget_ep_set_wedge,
1307 };
1308
1309 /* -------------------------------------------------------------------------- */
1310
1311 static int dwc3_gadget_get_frame(struct usb_gadget *g)
1312 {
1313         struct dwc3             *dwc = gadget_to_dwc(g);
1314         u32                     reg;
1315
1316         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1317         return DWC3_DSTS_SOFFN(reg);
1318 }
1319
1320 static int dwc3_gadget_wakeup(struct usb_gadget *g)
1321 {
1322         struct dwc3             *dwc = gadget_to_dwc(g);
1323
1324         unsigned long           timeout;
1325         unsigned long           flags;
1326
1327         u32                     reg;
1328
1329         int                     ret = 0;
1330
1331         u8                      link_state;
1332         u8                      speed;
1333
1334         spin_lock_irqsave(&dwc->lock, flags);
1335
1336         /*
1337          * According to the Databook Remote wakeup request should
1338          * be issued only when the device is in early suspend state.
1339          *
1340          * We can check that via USB Link State bits in DSTS register.
1341          */
1342         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1343
1344         speed = reg & DWC3_DSTS_CONNECTSPD;
1345         if (speed == DWC3_DSTS_SUPERSPEED) {
1346                 dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
1347                 ret = -EINVAL;
1348                 goto out;
1349         }
1350
1351         link_state = DWC3_DSTS_USBLNKST(reg);
1352
1353         switch (link_state) {
1354         case DWC3_LINK_STATE_RX_DET:    /* in HS, means Early Suspend */
1355         case DWC3_LINK_STATE_U3:        /* in HS, means SUSPEND */
1356                 break;
1357         default:
1358                 dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
1359                                 link_state);
1360                 ret = -EINVAL;
1361                 goto out;
1362         }
1363
1364         ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
1365         if (ret < 0) {
1366                 dev_err(dwc->dev, "failed to put link in Recovery\n");
1367                 goto out;
1368         }
1369
1370         /* Recent versions do this automatically */
1371         if (dwc->revision < DWC3_REVISION_194A) {
1372                 /* write zeroes to Link Change Request */
1373                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1374                 reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
1375                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1376         }
1377
1378         /* poll until Link State changes to ON */
1379         timeout = jiffies + msecs_to_jiffies(100);
1380
1381         while (!time_after(jiffies, timeout)) {
1382                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1383
1384                 /* in HS, means ON */
1385                 if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
1386                         break;
1387         }
1388
1389         if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
1390                 dev_err(dwc->dev, "failed to send remote wakeup\n");
1391                 ret = -EINVAL;
1392         }
1393
1394 out:
1395         spin_unlock_irqrestore(&dwc->lock, flags);
1396
1397         return ret;
1398 }
1399
1400 static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
1401                 int is_selfpowered)
1402 {
1403         struct dwc3             *dwc = gadget_to_dwc(g);
1404         unsigned long           flags;
1405
1406         spin_lock_irqsave(&dwc->lock, flags);
1407         dwc->is_selfpowered = !!is_selfpowered;
1408         spin_unlock_irqrestore(&dwc->lock, flags);
1409
1410         return 0;
1411 }
1412
1413 static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
1414 {
1415         u32                     reg;
1416         u32                     timeout = 500;
1417
1418         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1419         if (is_on) {
1420                 if (dwc->revision <= DWC3_REVISION_187A) {
1421                         reg &= ~DWC3_DCTL_TRGTULST_MASK;
1422                         reg |= DWC3_DCTL_TRGTULST_RX_DET;
1423                 }
1424
1425                 if (dwc->revision >= DWC3_REVISION_194A)
1426                         reg &= ~DWC3_DCTL_KEEP_CONNECT;
1427                 reg |= DWC3_DCTL_RUN_STOP;
1428                 dwc->pullups_connected = true;
1429         } else {
1430                 reg &= ~DWC3_DCTL_RUN_STOP;
1431                 dwc->pullups_connected = false;
1432         }
1433
1434         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1435
1436         do {
1437                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1438                 if (is_on) {
1439                         if (!(reg & DWC3_DSTS_DEVCTRLHLT))
1440                                 break;
1441                 } else {
1442                         if (reg & DWC3_DSTS_DEVCTRLHLT)
1443                                 break;
1444                 }
1445                 timeout--;
1446                 if (!timeout)
1447                         return -ETIMEDOUT;
1448                 udelay(1);
1449         } while (1);
1450
1451         dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
1452                         dwc->gadget_driver
1453                         ? dwc->gadget_driver->function : "no-function",
1454                         is_on ? "connect" : "disconnect");
1455
1456         return 0;
1457 }
1458
1459 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
1460 {
1461         struct dwc3             *dwc = gadget_to_dwc(g);
1462         unsigned long           flags;
1463         int                     ret;
1464
1465         is_on = !!is_on;
1466
1467         spin_lock_irqsave(&dwc->lock, flags);
1468         ret = dwc3_gadget_run_stop(dwc, is_on);
1469         spin_unlock_irqrestore(&dwc->lock, flags);
1470
1471         return ret;
1472 }
1473
1474 static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
1475 {
1476         u32                     reg;
1477
1478         /* Enable all but Start and End of Frame IRQs */
1479         reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
1480                         DWC3_DEVTEN_EVNTOVERFLOWEN |
1481                         DWC3_DEVTEN_CMDCMPLTEN |
1482                         DWC3_DEVTEN_ERRTICERREN |
1483                         DWC3_DEVTEN_WKUPEVTEN |
1484                         DWC3_DEVTEN_ULSTCNGEN |
1485                         DWC3_DEVTEN_CONNECTDONEEN |
1486                         DWC3_DEVTEN_USBRSTEN |
1487                         DWC3_DEVTEN_DISCONNEVTEN);
1488
1489         dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
1490 }
1491
1492 static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
1493 {
1494         /* mask all interrupts */
1495         dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
1496 }
1497
1498 static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
1499 static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
1500
1501 static int dwc3_gadget_start(struct usb_gadget *g,
1502                 struct usb_gadget_driver *driver)
1503 {
1504         struct dwc3             *dwc = gadget_to_dwc(g);
1505         struct dwc3_ep          *dep;
1506         unsigned long           flags;
1507         int                     ret = 0;
1508         int                     irq;
1509         u32                     reg;
1510
1511         spin_lock_irqsave(&dwc->lock, flags);
1512
1513         if (dwc->gadget_driver) {
1514                 dev_err(dwc->dev, "%s is already bound to %s\n",
1515                                 dwc->gadget.name,
1516                                 dwc->gadget_driver->driver.name);
1517                 ret = -EBUSY;
1518                 goto err0;
1519         }
1520
1521         dwc->gadget_driver      = driver;
1522
1523         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1524         reg &= ~(DWC3_DCFG_SPEED_MASK);
1525
1526         /**
1527          * WORKAROUND: DWC3 revision < 2.20a have an issue
1528          * which would cause metastability state on Run/Stop
1529          * bit if we try to force the IP to USB2-only mode.
1530          *
1531          * Because of that, we cannot configure the IP to any
1532          * speed other than the SuperSpeed
1533          *
1534          * Refers to:
1535          *
1536          * STAR#9000525659: Clock Domain Crossing on DCTL in
1537          * USB 2.0 Mode
1538          */
1539         if (dwc->revision < DWC3_REVISION_220A)
1540                 reg |= DWC3_DCFG_SUPERSPEED;
1541         else
1542                 reg |= dwc->maximum_speed;
1543         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1544
1545         dwc->start_config_issued = false;
1546
1547         /* Start with SuperSpeed Default */
1548         dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
1549
1550         dep = dwc->eps[0];
1551         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
1552         if (ret) {
1553                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1554                 goto err0;
1555         }
1556
1557         dep = dwc->eps[1];
1558         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
1559         if (ret) {
1560                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1561                 goto err1;
1562         }
1563
1564         /* begin to receive SETUP packets */
1565         dwc->ep0state = EP0_SETUP_PHASE;
1566         dwc3_ep0_out_start(dwc);
1567
1568         irq = platform_get_irq(to_platform_device(dwc->dev), 0);
1569         ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
1570                         IRQF_SHARED | IRQF_ONESHOT, "dwc3", dwc);
1571         if (ret) {
1572                 dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
1573                                 irq, ret);
1574                 goto err1;
1575         }
1576
1577         dwc3_gadget_enable_irq(dwc);
1578
1579         spin_unlock_irqrestore(&dwc->lock, flags);
1580
1581         return 0;
1582
1583 err1:
1584         __dwc3_gadget_ep_disable(dwc->eps[0]);
1585
1586 err0:
1587         spin_unlock_irqrestore(&dwc->lock, flags);
1588
1589         return ret;
1590 }
1591
1592 static int dwc3_gadget_stop(struct usb_gadget *g,
1593                 struct usb_gadget_driver *driver)
1594 {
1595         struct dwc3             *dwc = gadget_to_dwc(g);
1596         unsigned long           flags;
1597         int                     irq;
1598
1599         spin_lock_irqsave(&dwc->lock, flags);
1600
1601         dwc3_gadget_disable_irq(dwc);
1602         irq = platform_get_irq(to_platform_device(dwc->dev), 0);
1603         free_irq(irq, dwc);
1604
1605         __dwc3_gadget_ep_disable(dwc->eps[0]);
1606         __dwc3_gadget_ep_disable(dwc->eps[1]);
1607
1608         dwc->gadget_driver      = NULL;
1609
1610         spin_unlock_irqrestore(&dwc->lock, flags);
1611
1612         return 0;
1613 }
1614
1615 static const struct usb_gadget_ops dwc3_gadget_ops = {
1616         .get_frame              = dwc3_gadget_get_frame,
1617         .wakeup                 = dwc3_gadget_wakeup,
1618         .set_selfpowered        = dwc3_gadget_set_selfpowered,
1619         .pullup                 = dwc3_gadget_pullup,
1620         .udc_start              = dwc3_gadget_start,
1621         .udc_stop               = dwc3_gadget_stop,
1622 };
1623
1624 /* -------------------------------------------------------------------------- */
1625
1626 static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
1627                 u8 num, u32 direction)
1628 {
1629         struct dwc3_ep                  *dep;
1630         u8                              i;
1631
1632         for (i = 0; i < num; i++) {
1633                 u8 epnum = (i << 1) | (!!direction);
1634
1635                 dep = kzalloc(sizeof(*dep), GFP_KERNEL);
1636                 if (!dep) {
1637                         dev_err(dwc->dev, "can't allocate endpoint %d\n",
1638                                         epnum);
1639                         return -ENOMEM;
1640                 }
1641
1642                 dep->dwc = dwc;
1643                 dep->number = epnum;
1644                 dwc->eps[epnum] = dep;
1645
1646                 snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
1647                                 (epnum & 1) ? "in" : "out");
1648
1649                 dep->endpoint.name = dep->name;
1650                 dep->direction = (epnum & 1);
1651
1652                 if (epnum == 0 || epnum == 1) {
1653                         dep->endpoint.maxpacket = 512;
1654                         dep->endpoint.maxburst = 1;
1655                         dep->endpoint.ops = &dwc3_gadget_ep0_ops;
1656                         if (!epnum)
1657                                 dwc->gadget.ep0 = &dep->endpoint;
1658                 } else {
1659                         int             ret;
1660
1661                         dep->endpoint.maxpacket = 1024;
1662                         dep->endpoint.max_streams = 15;
1663                         dep->endpoint.ops = &dwc3_gadget_ep_ops;
1664                         list_add_tail(&dep->endpoint.ep_list,
1665                                         &dwc->gadget.ep_list);
1666
1667                         ret = dwc3_alloc_trb_pool(dep);
1668                         if (ret)
1669                                 return ret;
1670                 }
1671
1672                 INIT_LIST_HEAD(&dep->request_list);
1673                 INIT_LIST_HEAD(&dep->req_queued);
1674         }
1675
1676         return 0;
1677 }
1678
1679 static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
1680 {
1681         int                             ret;
1682
1683         INIT_LIST_HEAD(&dwc->gadget.ep_list);
1684
1685         ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
1686         if (ret < 0) {
1687                 dev_vdbg(dwc->dev, "failed to allocate OUT endpoints\n");
1688                 return ret;
1689         }
1690
1691         ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
1692         if (ret < 0) {
1693                 dev_vdbg(dwc->dev, "failed to allocate IN endpoints\n");
1694                 return ret;
1695         }
1696
1697         return 0;
1698 }
1699
1700 static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
1701 {
1702         struct dwc3_ep                  *dep;
1703         u8                              epnum;
1704
1705         for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1706                 dep = dwc->eps[epnum];
1707                 if (!dep)
1708                         continue;
1709                 /*
1710                  * Physical endpoints 0 and 1 are special; they form the
1711                  * bi-directional USB endpoint 0.
1712                  *
1713                  * For those two physical endpoints, we don't allocate a TRB
1714                  * pool nor do we add them the endpoints list. Due to that, we
1715                  * shouldn't do these two operations otherwise we would end up
1716                  * with all sorts of bugs when removing dwc3.ko.
1717                  */
1718                 if (epnum != 0 && epnum != 1) {
1719                         dwc3_free_trb_pool(dep);
1720                         list_del(&dep->endpoint.ep_list);
1721                 }
1722
1723                 kfree(dep);
1724         }
1725 }
1726
1727 /* -------------------------------------------------------------------------- */
1728
1729 static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
1730                 struct dwc3_request *req, struct dwc3_trb *trb,
1731                 const struct dwc3_event_depevt *event, int status)
1732 {
1733         unsigned int            count;
1734         unsigned int            s_pkt = 0;
1735         unsigned int            trb_status;
1736
1737         if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
1738                 /*
1739                  * We continue despite the error. There is not much we
1740                  * can do. If we don't clean it up we loop forever. If
1741                  * we skip the TRB then it gets overwritten after a
1742                  * while since we use them in a ring buffer. A BUG()
1743                  * would help. Lets hope that if this occurs, someone
1744                  * fixes the root cause instead of looking away :)
1745                  */
1746                 dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
1747                                 dep->name, trb);
1748         count = trb->size & DWC3_TRB_SIZE_MASK;
1749
1750         if (dep->direction) {
1751                 if (count) {
1752                         trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
1753                         if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
1754                                 dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
1755                                                 dep->name);
1756                                 /*
1757                                  * If missed isoc occurred and there is
1758                                  * no request queued then issue END
1759                                  * TRANSFER, so that core generates
1760                                  * next xfernotready and we will issue
1761                                  * a fresh START TRANSFER.
1762                                  * If there are still queued request
1763                                  * then wait, do not issue either END
1764                                  * or UPDATE TRANSFER, just attach next
1765                                  * request in request_list during
1766                                  * giveback.If any future queued request
1767                                  * is successfully transferred then we
1768                                  * will issue UPDATE TRANSFER for all
1769                                  * request in the request_list.
1770                                  */
1771                                 dep->flags |= DWC3_EP_MISSED_ISOC;
1772                         } else {
1773                                 dev_err(dwc->dev, "incomplete IN transfer %s\n",
1774                                                 dep->name);
1775                                 status = -ECONNRESET;
1776                         }
1777                 } else {
1778                         dep->flags &= ~DWC3_EP_MISSED_ISOC;
1779                 }
1780         } else {
1781                 if (count && (event->status & DEPEVT_STATUS_SHORT))
1782                         s_pkt = 1;
1783         }
1784
1785         /*
1786          * We assume here we will always receive the entire data block
1787          * which we should receive. Meaning, if we program RX to
1788          * receive 4K but we receive only 2K, we assume that's all we
1789          * should receive and we simply bounce the request back to the
1790          * gadget driver for further processing.
1791          */
1792         req->request.actual += req->request.length - count;
1793         if (s_pkt)
1794                 return 1;
1795         if ((event->status & DEPEVT_STATUS_LST) &&
1796                         (trb->ctrl & (DWC3_TRB_CTRL_LST |
1797                                 DWC3_TRB_CTRL_HWO)))
1798                 return 1;
1799         if ((event->status & DEPEVT_STATUS_IOC) &&
1800                         (trb->ctrl & DWC3_TRB_CTRL_IOC))
1801                 return 1;
1802         return 0;
1803 }
1804
1805 static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
1806                 const struct dwc3_event_depevt *event, int status)
1807 {
1808         struct dwc3_request     *req;
1809         struct dwc3_trb         *trb;
1810         unsigned int            slot;
1811         unsigned int            i;
1812         int                     ret;
1813
1814         do {
1815                 req = next_request(&dep->req_queued);
1816                 if (!req) {
1817                         WARN_ON_ONCE(1);
1818                         return 1;
1819                 }
1820                 i = 0;
1821                 do {
1822                         slot = req->start_slot + i;
1823                         if ((slot == DWC3_TRB_NUM - 1) &&
1824                                 usb_endpoint_xfer_isoc(dep->endpoint.desc))
1825                                 slot++;
1826                         slot %= DWC3_TRB_NUM;
1827                         trb = &dep->trb_pool[slot];
1828
1829                         ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
1830                                         event, status);
1831                         if (ret)
1832                                 break;
1833                 }while (++i < req->request.num_mapped_sgs);
1834
1835                 dwc3_gadget_giveback(dep, req, status);
1836
1837                 if (ret)
1838                         break;
1839         } while (1);
1840
1841         if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
1842                         list_empty(&dep->req_queued)) {
1843                 if (list_empty(&dep->request_list)) {
1844                         /*
1845                          * If there is no entry in request list then do
1846                          * not issue END TRANSFER now. Just set PENDING
1847                          * flag, so that END TRANSFER is issued when an
1848                          * entry is added into request list.
1849                          */
1850                         dep->flags = DWC3_EP_PENDING_REQUEST;
1851                 } else {
1852                         dwc3_stop_active_transfer(dwc, dep->number);
1853                         dep->flags = DWC3_EP_ENABLED;
1854                 }
1855                 return 1;
1856         }
1857
1858         if ((event->status & DEPEVT_STATUS_IOC) &&
1859                         (trb->ctrl & DWC3_TRB_CTRL_IOC))
1860                 return 0;
1861         return 1;
1862 }
1863
1864 static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
1865                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event,
1866                 int start_new)
1867 {
1868         unsigned                status = 0;
1869         int                     clean_busy;
1870
1871         if (event->status & DEPEVT_STATUS_BUSERR)
1872                 status = -ECONNRESET;
1873
1874         clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
1875         if (clean_busy)
1876                 dep->flags &= ~DWC3_EP_BUSY;
1877
1878         /*
1879          * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
1880          * See dwc3_gadget_linksts_change_interrupt() for 1st half.
1881          */
1882         if (dwc->revision < DWC3_REVISION_183A) {
1883                 u32             reg;
1884                 int             i;
1885
1886                 for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
1887                         dep = dwc->eps[i];
1888
1889                         if (!(dep->flags & DWC3_EP_ENABLED))
1890                                 continue;
1891
1892                         if (!list_empty(&dep->req_queued))
1893                                 return;
1894                 }
1895
1896                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1897                 reg |= dwc->u1u2;
1898                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1899
1900                 dwc->u1u2 = 0;
1901         }
1902 }
1903
1904 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
1905                 const struct dwc3_event_depevt *event)
1906 {
1907         struct dwc3_ep          *dep;
1908         u8                      epnum = event->endpoint_number;
1909
1910         dep = dwc->eps[epnum];
1911
1912         if (!(dep->flags & DWC3_EP_ENABLED))
1913                 return;
1914
1915         dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
1916                         dwc3_ep_event_string(event->endpoint_event));
1917
1918         if (epnum == 0 || epnum == 1) {
1919                 dwc3_ep0_interrupt(dwc, event);
1920                 return;
1921         }
1922
1923         switch (event->endpoint_event) {
1924         case DWC3_DEPEVT_XFERCOMPLETE:
1925                 dep->resource_index = 0;
1926
1927                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1928                         dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
1929                                         dep->name);
1930                         return;
1931                 }
1932
1933                 dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
1934                 break;
1935         case DWC3_DEPEVT_XFERINPROGRESS:
1936                 if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1937                         dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
1938                                         dep->name);
1939                         return;
1940                 }
1941
1942                 dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
1943                 break;
1944         case DWC3_DEPEVT_XFERNOTREADY:
1945                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1946                         dwc3_gadget_start_isoc(dwc, dep, event);
1947                 } else {
1948                         int ret;
1949
1950                         dev_vdbg(dwc->dev, "%s: reason %s\n",
1951                                         dep->name, event->status &
1952                                         DEPEVT_STATUS_TRANSFER_ACTIVE
1953                                         ? "Transfer Active"
1954                                         : "Transfer Not Active");
1955
1956                         ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
1957                         if (!ret || ret == -EBUSY)
1958                                 return;
1959
1960                         dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1961                                         dep->name);
1962                 }
1963
1964                 break;
1965         case DWC3_DEPEVT_STREAMEVT:
1966                 if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) {
1967                         dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
1968                                         dep->name);
1969                         return;
1970                 }
1971
1972                 switch (event->status) {
1973                 case DEPEVT_STREAMEVT_FOUND:
1974                         dev_vdbg(dwc->dev, "Stream %d found and started\n",
1975                                         event->parameters);
1976
1977                         break;
1978                 case DEPEVT_STREAMEVT_NOTFOUND:
1979                         /* FALLTHROUGH */
1980                 default:
1981                         dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
1982                 }
1983                 break;
1984         case DWC3_DEPEVT_RXTXFIFOEVT:
1985                 dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
1986                 break;
1987         case DWC3_DEPEVT_EPCMDCMPLT:
1988                 dev_vdbg(dwc->dev, "Endpoint Command Complete\n");
1989                 break;
1990         }
1991 }
1992
1993 static void dwc3_disconnect_gadget(struct dwc3 *dwc)
1994 {
1995         if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
1996                 spin_unlock(&dwc->lock);
1997                 dwc->gadget_driver->disconnect(&dwc->gadget);
1998                 spin_lock(&dwc->lock);
1999         }
2000 }
2001
2002 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
2003 {
2004         struct dwc3_ep *dep;
2005         struct dwc3_gadget_ep_cmd_params params;
2006         u32 cmd;
2007         int ret;
2008
2009         dep = dwc->eps[epnum];
2010
2011         if (!dep->resource_index)
2012                 return;
2013
2014         /*
2015          * NOTICE: We are violating what the Databook says about the
2016          * EndTransfer command. Ideally we would _always_ wait for the
2017          * EndTransfer Command Completion IRQ, but that's causing too
2018          * much trouble synchronizing between us and gadget driver.
2019          *
2020          * We have discussed this with the IP Provider and it was
2021          * suggested to giveback all requests here, but give HW some
2022          * extra time to synchronize with the interconnect. We're using
2023          * an arbitraty 100us delay for that.
2024          *
2025          * Note also that a similar handling was tested by Synopsys
2026          * (thanks a lot Paul) and nothing bad has come out of it.
2027          * In short, what we're doing is:
2028          *
2029          * - Issue EndTransfer WITH CMDIOC bit set
2030          * - Wait 100us
2031          */
2032
2033         cmd = DWC3_DEPCMD_ENDTRANSFER;
2034         cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
2035         cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
2036         memset(&params, 0, sizeof(params));
2037         ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
2038         WARN_ON_ONCE(ret);
2039         dep->resource_index = 0;
2040         dep->flags &= ~DWC3_EP_BUSY;
2041         udelay(100);
2042 }
2043
2044 static void dwc3_stop_active_transfers(struct dwc3 *dwc)
2045 {
2046         u32 epnum;
2047
2048         for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
2049                 struct dwc3_ep *dep;
2050
2051                 dep = dwc->eps[epnum];
2052                 if (!dep)
2053                         continue;
2054
2055                 if (!(dep->flags & DWC3_EP_ENABLED))
2056                         continue;
2057
2058                 dwc3_remove_requests(dwc, dep);
2059         }
2060 }
2061
2062 static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
2063 {
2064         u32 epnum;
2065
2066         for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
2067                 struct dwc3_ep *dep;
2068                 struct dwc3_gadget_ep_cmd_params params;
2069                 int ret;
2070
2071                 dep = dwc->eps[epnum];
2072                 if (!dep)
2073                         continue;
2074
2075                 if (!(dep->flags & DWC3_EP_STALL))
2076                         continue;
2077
2078                 dep->flags &= ~DWC3_EP_STALL;
2079
2080                 memset(&params, 0, sizeof(params));
2081                 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
2082                                 DWC3_DEPCMD_CLEARSTALL, &params);
2083                 WARN_ON_ONCE(ret);
2084         }
2085 }
2086
2087 static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
2088 {
2089         int                     reg;
2090
2091         dev_vdbg(dwc->dev, "%s\n", __func__);
2092
2093         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2094         reg &= ~DWC3_DCTL_INITU1ENA;
2095         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2096
2097         reg &= ~DWC3_DCTL_INITU2ENA;
2098         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2099
2100         dwc3_disconnect_gadget(dwc);
2101         dwc->start_config_issued = false;
2102
2103         dwc->gadget.speed = USB_SPEED_UNKNOWN;
2104         dwc->setup_packet_pending = false;
2105 }
2106
2107 static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
2108 {
2109         u32                     reg;
2110
2111         reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
2112
2113         if (suspend)
2114                 reg |= DWC3_GUSB3PIPECTL_SUSPHY;
2115         else
2116                 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
2117
2118         dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
2119 }
2120
2121 static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
2122 {
2123         u32                     reg;
2124
2125         reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
2126
2127         if (suspend)
2128                 reg |= DWC3_GUSB2PHYCFG_SUSPHY;
2129         else
2130                 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
2131
2132         dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
2133 }
2134
2135 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
2136 {
2137         u32                     reg;
2138
2139         dev_vdbg(dwc->dev, "%s\n", __func__);
2140
2141         /*
2142          * WORKAROUND: DWC3 revisions <1.88a have an issue which
2143          * would cause a missing Disconnect Event if there's a
2144          * pending Setup Packet in the FIFO.
2145          *
2146          * There's no suggested workaround on the official Bug
2147          * report, which states that "unless the driver/application
2148          * is doing any special handling of a disconnect event,
2149          * there is no functional issue".
2150          *
2151          * Unfortunately, it turns out that we _do_ some special
2152          * handling of a disconnect event, namely complete all
2153          * pending transfers, notify gadget driver of the
2154          * disconnection, and so on.
2155          *
2156          * Our suggested workaround is to follow the Disconnect
2157          * Event steps here, instead, based on a setup_packet_pending
2158          * flag. Such flag gets set whenever we have a XferNotReady
2159          * event on EP0 and gets cleared on XferComplete for the
2160          * same endpoint.
2161          *
2162          * Refers to:
2163          *
2164          * STAR#9000466709: RTL: Device : Disconnect event not
2165          * generated if setup packet pending in FIFO
2166          */
2167         if (dwc->revision < DWC3_REVISION_188A) {
2168                 if (dwc->setup_packet_pending)
2169                         dwc3_gadget_disconnect_interrupt(dwc);
2170         }
2171
2172         /* after reset -> Default State */
2173         usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
2174
2175         /* Recent versions support automatic phy suspend and don't need this */
2176         if (dwc->revision < DWC3_REVISION_194A) {
2177                 /* Resume PHYs */
2178                 dwc3_gadget_usb2_phy_suspend(dwc, false);
2179                 dwc3_gadget_usb3_phy_suspend(dwc, false);
2180         }
2181
2182         if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
2183                 dwc3_disconnect_gadget(dwc);
2184
2185         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2186         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
2187         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2188         dwc->test_mode = false;
2189
2190         dwc3_stop_active_transfers(dwc);
2191         dwc3_clear_stall_all_ep(dwc);
2192         dwc->start_config_issued = false;
2193
2194         /* Reset device address to zero */
2195         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2196         reg &= ~(DWC3_DCFG_DEVADDR_MASK);
2197         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2198 }
2199
2200 static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
2201 {
2202         u32 reg;
2203         u32 usb30_clock = DWC3_GCTL_CLK_BUS;
2204
2205         /*
2206          * We change the clock only at SS but I dunno why I would want to do
2207          * this. Maybe it becomes part of the power saving plan.
2208          */
2209
2210         if (speed != DWC3_DSTS_SUPERSPEED)
2211                 return;
2212
2213         /*
2214          * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
2215          * each time on Connect Done.
2216          */
2217         if (!usb30_clock)
2218                 return;
2219
2220         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
2221         reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
2222         dwc3_writel(dwc->regs, DWC3_GCTL, reg);
2223 }
2224
2225 static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
2226 {
2227         switch (speed) {
2228         case USB_SPEED_SUPER:
2229                 dwc3_gadget_usb2_phy_suspend(dwc, true);
2230                 break;
2231         case USB_SPEED_HIGH:
2232         case USB_SPEED_FULL:
2233         case USB_SPEED_LOW:
2234                 dwc3_gadget_usb3_phy_suspend(dwc, true);
2235                 break;
2236         }
2237 }
2238
2239 static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
2240 {
2241         struct dwc3_ep          *dep;
2242         int                     ret;
2243         u32                     reg;
2244         u8                      speed;
2245
2246         dev_vdbg(dwc->dev, "%s\n", __func__);
2247
2248         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
2249         speed = reg & DWC3_DSTS_CONNECTSPD;
2250         dwc->speed = speed;
2251
2252         dwc3_update_ram_clk_sel(dwc, speed);
2253
2254         switch (speed) {
2255         case DWC3_DCFG_SUPERSPEED:
2256                 /*
2257                  * WORKAROUND: DWC3 revisions <1.90a have an issue which
2258                  * would cause a missing USB3 Reset event.
2259                  *
2260                  * In such situations, we should force a USB3 Reset
2261                  * event by calling our dwc3_gadget_reset_interrupt()
2262                  * routine.
2263                  *
2264                  * Refers to:
2265                  *
2266                  * STAR#9000483510: RTL: SS : USB3 reset event may
2267                  * not be generated always when the link enters poll
2268                  */
2269                 if (dwc->revision < DWC3_REVISION_190A)
2270                         dwc3_gadget_reset_interrupt(dwc);
2271
2272                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
2273                 dwc->gadget.ep0->maxpacket = 512;
2274                 dwc->gadget.speed = USB_SPEED_SUPER;
2275                 break;
2276         case DWC3_DCFG_HIGHSPEED:
2277                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2278                 dwc->gadget.ep0->maxpacket = 64;
2279                 dwc->gadget.speed = USB_SPEED_HIGH;
2280                 break;
2281         case DWC3_DCFG_FULLSPEED2:
2282         case DWC3_DCFG_FULLSPEED1:
2283                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2284                 dwc->gadget.ep0->maxpacket = 64;
2285                 dwc->gadget.speed = USB_SPEED_FULL;
2286                 break;
2287         case DWC3_DCFG_LOWSPEED:
2288                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
2289                 dwc->gadget.ep0->maxpacket = 8;
2290                 dwc->gadget.speed = USB_SPEED_LOW;
2291                 break;
2292         }
2293
2294         /* Enable USB2 LPM Capability */
2295
2296         if ((dwc->revision > DWC3_REVISION_194A)
2297                         && (speed != DWC3_DCFG_SUPERSPEED)) {
2298                 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2299                 reg |= DWC3_DCFG_LPM_CAP;
2300                 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2301
2302                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2303                 reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
2304
2305                 /*
2306                  * TODO: This should be configurable. For now using
2307                  * maximum allowed HIRD threshold value of 0b1100
2308                  */
2309                 reg |= DWC3_DCTL_HIRD_THRES(12);
2310
2311                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2312         }
2313
2314         /* Recent versions support automatic phy suspend and don't need this */
2315         if (dwc->revision < DWC3_REVISION_194A) {
2316                 /* Suspend unneeded PHY */
2317                 dwc3_gadget_phy_suspend(dwc, dwc->gadget.speed);
2318         }
2319
2320         dep = dwc->eps[0];
2321         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
2322         if (ret) {
2323                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2324                 return;
2325         }
2326
2327         dep = dwc->eps[1];
2328         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
2329         if (ret) {
2330                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2331                 return;
2332         }
2333
2334         /*
2335          * Configure PHY via GUSB3PIPECTLn if required.
2336          *
2337          * Update GTXFIFOSIZn
2338          *
2339          * In both cases reset values should be sufficient.
2340          */
2341 }
2342
2343 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
2344 {
2345         dev_vdbg(dwc->dev, "%s\n", __func__);
2346
2347         /*
2348          * TODO take core out of low power mode when that's
2349          * implemented.
2350          */
2351
2352         dwc->gadget_driver->resume(&dwc->gadget);
2353 }
2354
2355 static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
2356                 unsigned int evtinfo)
2357 {
2358         enum dwc3_link_state    next = evtinfo & DWC3_LINK_STATE_MASK;
2359         unsigned int            pwropt;
2360
2361         /*
2362          * WORKAROUND: DWC3 < 2.50a have an issue when configured without
2363          * Hibernation mode enabled which would show up when device detects
2364          * host-initiated U3 exit.
2365          *
2366          * In that case, device will generate a Link State Change Interrupt
2367          * from U3 to RESUME which is only necessary if Hibernation is
2368          * configured in.
2369          *
2370          * There are no functional changes due to such spurious event and we
2371          * just need to ignore it.
2372          *
2373          * Refers to:
2374          *
2375          * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation
2376          * operational mode
2377          */
2378         pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
2379         if ((dwc->revision < DWC3_REVISION_250A) &&
2380                         (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
2381                 if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
2382                                 (next == DWC3_LINK_STATE_RESUME)) {
2383                         dev_vdbg(dwc->dev, "ignoring transition U3 -> Resume\n");
2384                         return;
2385                 }
2386         }
2387
2388         /*
2389          * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
2390          * on the link partner, the USB session might do multiple entry/exit
2391          * of low power states before a transfer takes place.
2392          *
2393          * Due to this problem, we might experience lower throughput. The
2394          * suggested workaround is to disable DCTL[12:9] bits if we're
2395          * transitioning from U1/U2 to U0 and enable those bits again
2396          * after a transfer completes and there are no pending transfers
2397          * on any of the enabled endpoints.
2398          *
2399          * This is the first half of that workaround.
2400          *
2401          * Refers to:
2402          *
2403          * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
2404          * core send LGO_Ux entering U0
2405          */
2406         if (dwc->revision < DWC3_REVISION_183A) {
2407                 if (next == DWC3_LINK_STATE_U0) {
2408                         u32     u1u2;
2409                         u32     reg;
2410
2411                         switch (dwc->link_state) {
2412                         case DWC3_LINK_STATE_U1:
2413                         case DWC3_LINK_STATE_U2:
2414                                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2415                                 u1u2 = reg & (DWC3_DCTL_INITU2ENA
2416                                                 | DWC3_DCTL_ACCEPTU2ENA
2417                                                 | DWC3_DCTL_INITU1ENA
2418                                                 | DWC3_DCTL_ACCEPTU1ENA);
2419
2420                                 if (!dwc->u1u2)
2421                                         dwc->u1u2 = reg & u1u2;
2422
2423                                 reg &= ~u1u2;
2424
2425                                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2426                                 break;
2427                         default:
2428                                 /* do nothing */
2429                                 break;
2430                         }
2431                 }
2432         }
2433
2434         dwc->link_state = next;
2435
2436         dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
2437 }
2438
2439 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
2440                 const struct dwc3_event_devt *event)
2441 {
2442         switch (event->type) {
2443         case DWC3_DEVICE_EVENT_DISCONNECT:
2444                 dwc3_gadget_disconnect_interrupt(dwc);
2445                 break;
2446         case DWC3_DEVICE_EVENT_RESET:
2447                 dwc3_gadget_reset_interrupt(dwc);
2448                 break;
2449         case DWC3_DEVICE_EVENT_CONNECT_DONE:
2450                 dwc3_gadget_conndone_interrupt(dwc);
2451                 break;
2452         case DWC3_DEVICE_EVENT_WAKEUP:
2453                 dwc3_gadget_wakeup_interrupt(dwc);
2454                 break;
2455         case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
2456                 dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
2457                 break;
2458         case DWC3_DEVICE_EVENT_EOPF:
2459                 dev_vdbg(dwc->dev, "End of Periodic Frame\n");
2460                 break;
2461         case DWC3_DEVICE_EVENT_SOF:
2462                 dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
2463                 break;
2464         case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
2465                 dev_vdbg(dwc->dev, "Erratic Error\n");
2466                 break;
2467         case DWC3_DEVICE_EVENT_CMD_CMPL:
2468                 dev_vdbg(dwc->dev, "Command Complete\n");
2469                 break;
2470         case DWC3_DEVICE_EVENT_OVERFLOW:
2471                 dev_vdbg(dwc->dev, "Overflow\n");
2472                 break;
2473         default:
2474                 dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
2475         }
2476 }
2477
2478 static void dwc3_process_event_entry(struct dwc3 *dwc,
2479                 const union dwc3_event *event)
2480 {
2481         /* Endpoint IRQ, handle it and return early */
2482         if (event->type.is_devspec == 0) {
2483                 /* depevt */
2484                 return dwc3_endpoint_interrupt(dwc, &event->depevt);
2485         }
2486
2487         switch (event->type.type) {
2488         case DWC3_EVENT_TYPE_DEV:
2489                 dwc3_gadget_interrupt(dwc, &event->devt);
2490                 break;
2491         /* REVISIT what to do with Carkit and I2C events ? */
2492         default:
2493                 dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
2494         }
2495 }
2496
2497 static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
2498 {
2499         struct dwc3 *dwc = _dwc;
2500         unsigned long flags;
2501         irqreturn_t ret = IRQ_NONE;
2502         int i;
2503
2504         spin_lock_irqsave(&dwc->lock, flags);
2505
2506         for (i = 0; i < dwc->num_event_buffers; i++) {
2507                 struct dwc3_event_buffer *evt;
2508                 int                     left;
2509
2510                 evt = dwc->ev_buffs[i];
2511                 left = evt->count;
2512
2513                 if (!(evt->flags & DWC3_EVENT_PENDING))
2514                         continue;
2515
2516                 while (left > 0) {
2517                         union dwc3_event event;
2518
2519                         event.raw = *(u32 *) (evt->buf + evt->lpos);
2520
2521                         dwc3_process_event_entry(dwc, &event);
2522
2523                         /*
2524                          * FIXME we wrap around correctly to the next entry as
2525                          * almost all entries are 4 bytes in size. There is one
2526                          * entry which has 12 bytes which is a regular entry
2527                          * followed by 8 bytes data. ATM I don't know how
2528                          * things are organized if we get next to the a
2529                          * boundary so I worry about that once we try to handle
2530                          * that.
2531                          */
2532                         evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
2533                         left -= 4;
2534
2535                         dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(i), 4);
2536                 }
2537
2538                 evt->count = 0;
2539                 evt->flags &= ~DWC3_EVENT_PENDING;
2540                 ret = IRQ_HANDLED;
2541         }
2542
2543         spin_unlock_irqrestore(&dwc->lock, flags);
2544
2545         return ret;
2546 }
2547
2548 static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
2549 {
2550         struct dwc3_event_buffer *evt;
2551         u32 count;
2552
2553         evt = dwc->ev_buffs[buf];
2554
2555         count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
2556         count &= DWC3_GEVNTCOUNT_MASK;
2557         if (!count)
2558                 return IRQ_NONE;
2559
2560         evt->count = count;
2561         evt->flags |= DWC3_EVENT_PENDING;
2562
2563         return IRQ_WAKE_THREAD;
2564 }
2565
2566 static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
2567 {
2568         struct dwc3                     *dwc = _dwc;
2569         int                             i;
2570         irqreturn_t                     ret = IRQ_NONE;
2571
2572         spin_lock(&dwc->lock);
2573
2574         for (i = 0; i < dwc->num_event_buffers; i++) {
2575                 irqreturn_t status;
2576
2577                 status = dwc3_process_event_buf(dwc, i);
2578                 if (status == IRQ_WAKE_THREAD)
2579                         ret = status;
2580         }
2581
2582         spin_unlock(&dwc->lock);
2583
2584         return ret;
2585 }
2586
2587 /**
2588  * dwc3_gadget_init - Initializes gadget related registers
2589  * @dwc: pointer to our controller context structure
2590  *
2591  * Returns 0 on success otherwise negative errno.
2592  */
2593 int dwc3_gadget_init(struct dwc3 *dwc)
2594 {
2595         u32                                     reg;
2596         int                                     ret;
2597
2598         dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2599                         &dwc->ctrl_req_addr, GFP_KERNEL);
2600         if (!dwc->ctrl_req) {
2601                 dev_err(dwc->dev, "failed to allocate ctrl request\n");
2602                 ret = -ENOMEM;
2603                 goto err0;
2604         }
2605
2606         dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2607                         &dwc->ep0_trb_addr, GFP_KERNEL);
2608         if (!dwc->ep0_trb) {
2609                 dev_err(dwc->dev, "failed to allocate ep0 trb\n");
2610                 ret = -ENOMEM;
2611                 goto err1;
2612         }
2613
2614         dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL);
2615         if (!dwc->setup_buf) {
2616                 dev_err(dwc->dev, "failed to allocate setup buffer\n");
2617                 ret = -ENOMEM;
2618                 goto err2;
2619         }
2620
2621         dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
2622                         DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr,
2623                         GFP_KERNEL);
2624         if (!dwc->ep0_bounce) {
2625                 dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
2626                 ret = -ENOMEM;
2627                 goto err3;
2628         }
2629
2630         dwc->gadget.ops                 = &dwc3_gadget_ops;
2631         dwc->gadget.max_speed           = USB_SPEED_SUPER;
2632         dwc->gadget.speed               = USB_SPEED_UNKNOWN;
2633         dwc->gadget.sg_supported        = true;
2634         dwc->gadget.name                = "dwc3-gadget";
2635
2636         /*
2637          * REVISIT: Here we should clear all pending IRQs to be
2638          * sure we're starting from a well known location.
2639          */
2640
2641         ret = dwc3_gadget_init_endpoints(dwc);
2642         if (ret)
2643                 goto err4;
2644
2645         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2646         reg |= DWC3_DCFG_LPM_CAP;
2647         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2648
2649         /* Enable USB2 LPM and automatic phy suspend only on recent versions */
2650         if (dwc->revision >= DWC3_REVISION_194A) {
2651                 dwc3_gadget_usb2_phy_suspend(dwc, false);
2652                 dwc3_gadget_usb3_phy_suspend(dwc, false);
2653         }
2654
2655         ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
2656         if (ret) {
2657                 dev_err(dwc->dev, "failed to register udc\n");
2658                 goto err5;
2659         }
2660
2661         return 0;
2662
2663 err5:
2664         dwc3_gadget_free_endpoints(dwc);
2665
2666 err4:
2667         dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
2668                         dwc->ep0_bounce, dwc->ep0_bounce_addr);
2669
2670 err3:
2671         kfree(dwc->setup_buf);
2672
2673 err2:
2674         dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2675                         dwc->ep0_trb, dwc->ep0_trb_addr);
2676
2677 err1:
2678         dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2679                         dwc->ctrl_req, dwc->ctrl_req_addr);
2680
2681 err0:
2682         return ret;
2683 }
2684
2685 /* -------------------------------------------------------------------------- */
2686
2687 void dwc3_gadget_exit(struct dwc3 *dwc)
2688 {
2689         usb_del_gadget_udc(&dwc->gadget);
2690
2691         dwc3_gadget_free_endpoints(dwc);
2692
2693         dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
2694                         dwc->ep0_bounce, dwc->ep0_bounce_addr);
2695
2696         kfree(dwc->setup_buf);
2697
2698         dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2699                         dwc->ep0_trb, dwc->ep0_trb_addr);
2700
2701         dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2702                         dwc->ctrl_req, dwc->ctrl_req_addr);
2703 }
2704
2705 int dwc3_gadget_prepare(struct dwc3 *dwc)
2706 {
2707         if (dwc->pullups_connected)
2708                 dwc3_gadget_disable_irq(dwc);
2709
2710         return 0;
2711 }
2712
2713 void dwc3_gadget_complete(struct dwc3 *dwc)
2714 {
2715         if (dwc->pullups_connected) {
2716                 dwc3_gadget_enable_irq(dwc);
2717                 dwc3_gadget_run_stop(dwc, true);
2718         }
2719 }
2720
2721 int dwc3_gadget_suspend(struct dwc3 *dwc)
2722 {
2723         __dwc3_gadget_ep_disable(dwc->eps[0]);
2724         __dwc3_gadget_ep_disable(dwc->eps[1]);
2725
2726         dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
2727
2728         return 0;
2729 }
2730
2731 int dwc3_gadget_resume(struct dwc3 *dwc)
2732 {
2733         struct dwc3_ep          *dep;
2734         int                     ret;
2735
2736         /* Start with SuperSpeed Default */
2737         dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
2738
2739         dep = dwc->eps[0];
2740         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
2741         if (ret)
2742                 goto err0;
2743
2744         dep = dwc->eps[1];
2745         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
2746         if (ret)
2747                 goto err1;
2748
2749         /* begin to receive SETUP packets */
2750         dwc->ep0state = EP0_SETUP_PHASE;
2751         dwc3_ep0_out_start(dwc);
2752
2753         dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
2754
2755         return 0;
2756
2757 err1:
2758         __dwc3_gadget_ep_disable(dwc->eps[0]);
2759
2760 err0:
2761         return ret;
2762 }