Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
[sfrench/cifs-2.6.git] / drivers / usb / chipidea / udc.c
1 /*
2  * udc.c - ChipIdea UDC driver
3  *
4  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
5  *
6  * Author: David Lopo
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/dmapool.h>
16 #include <linux/err.h>
17 #include <linux/irqreturn.h>
18 #include <linux/kernel.h>
19 #include <linux/slab.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/usb/ch9.h>
22 #include <linux/usb/gadget.h>
23 #include <linux/usb/otg.h>
24 #include <linux/usb/chipidea.h>
25
26 #include "ci.h"
27 #include "udc.h"
28 #include "bits.h"
29 #include "debug.h"
30
31 /* control endpoint description */
32 static const struct usb_endpoint_descriptor
33 ctrl_endpt_out_desc = {
34         .bLength         = USB_DT_ENDPOINT_SIZE,
35         .bDescriptorType = USB_DT_ENDPOINT,
36
37         .bEndpointAddress = USB_DIR_OUT,
38         .bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
39         .wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
40 };
41
42 static const struct usb_endpoint_descriptor
43 ctrl_endpt_in_desc = {
44         .bLength         = USB_DT_ENDPOINT_SIZE,
45         .bDescriptorType = USB_DT_ENDPOINT,
46
47         .bEndpointAddress = USB_DIR_IN,
48         .bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
49         .wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
50 };
51
52 /**
53  * hw_ep_bit: calculates the bit number
54  * @num: endpoint number
55  * @dir: endpoint direction
56  *
57  * This function returns bit number
58  */
59 static inline int hw_ep_bit(int num, int dir)
60 {
61         return num + (dir ? 16 : 0);
62 }
63
64 static inline int ep_to_bit(struct ci13xxx *ci, int n)
65 {
66         int fill = 16 - ci->hw_ep_max / 2;
67
68         if (n >= ci->hw_ep_max / 2)
69                 n += fill;
70
71         return n;
72 }
73
74 /**
75  * hw_device_state: enables/disables interrupts (execute without interruption)
76  * @dma: 0 => disable, !0 => enable and set dma engine
77  *
78  * This function returns an error code
79  */
80 static int hw_device_state(struct ci13xxx *ci, u32 dma)
81 {
82         if (dma) {
83                 hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
84                 /* interrupt, error, port change, reset, sleep/suspend */
85                 hw_write(ci, OP_USBINTR, ~0,
86                              USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
87         } else {
88                 hw_write(ci, OP_USBINTR, ~0, 0);
89         }
90         return 0;
91 }
92
93 /**
94  * hw_ep_flush: flush endpoint fifo (execute without interruption)
95  * @num: endpoint number
96  * @dir: endpoint direction
97  *
98  * This function returns an error code
99  */
100 static int hw_ep_flush(struct ci13xxx *ci, int num, int dir)
101 {
102         int n = hw_ep_bit(num, dir);
103
104         do {
105                 /* flush any pending transfer */
106                 hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n));
107                 while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
108                         cpu_relax();
109         } while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
110
111         return 0;
112 }
113
114 /**
115  * hw_ep_disable: disables endpoint (execute without interruption)
116  * @num: endpoint number
117  * @dir: endpoint direction
118  *
119  * This function returns an error code
120  */
121 static int hw_ep_disable(struct ci13xxx *ci, int num, int dir)
122 {
123         hw_ep_flush(ci, num, dir);
124         hw_write(ci, OP_ENDPTCTRL + num,
125                  dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
126         return 0;
127 }
128
129 /**
130  * hw_ep_enable: enables endpoint (execute without interruption)
131  * @num:  endpoint number
132  * @dir:  endpoint direction
133  * @type: endpoint type
134  *
135  * This function returns an error code
136  */
137 static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type)
138 {
139         u32 mask, data;
140
141         if (dir) {
142                 mask  = ENDPTCTRL_TXT;  /* type    */
143                 data  = type << __ffs(mask);
144
145                 mask |= ENDPTCTRL_TXS;  /* unstall */
146                 mask |= ENDPTCTRL_TXR;  /* reset data toggle */
147                 data |= ENDPTCTRL_TXR;
148                 mask |= ENDPTCTRL_TXE;  /* enable  */
149                 data |= ENDPTCTRL_TXE;
150         } else {
151                 mask  = ENDPTCTRL_RXT;  /* type    */
152                 data  = type << __ffs(mask);
153
154                 mask |= ENDPTCTRL_RXS;  /* unstall */
155                 mask |= ENDPTCTRL_RXR;  /* reset data toggle */
156                 data |= ENDPTCTRL_RXR;
157                 mask |= ENDPTCTRL_RXE;  /* enable  */
158                 data |= ENDPTCTRL_RXE;
159         }
160         hw_write(ci, OP_ENDPTCTRL + num, mask, data);
161         return 0;
162 }
163
164 /**
165  * hw_ep_get_halt: return endpoint halt status
166  * @num: endpoint number
167  * @dir: endpoint direction
168  *
169  * This function returns 1 if endpoint halted
170  */
171 static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir)
172 {
173         u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
174
175         return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
176 }
177
178 /**
179  * hw_test_and_clear_setup_status: test & clear setup status (execute without
180  *                                 interruption)
181  * @n: endpoint number
182  *
183  * This function returns setup status
184  */
185 static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n)
186 {
187         n = ep_to_bit(ci, n);
188         return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
189 }
190
191 /**
192  * hw_ep_prime: primes endpoint (execute without interruption)
193  * @num:     endpoint number
194  * @dir:     endpoint direction
195  * @is_ctrl: true if control endpoint
196  *
197  * This function returns an error code
198  */
199 static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl)
200 {
201         int n = hw_ep_bit(num, dir);
202
203         if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
204                 return -EAGAIN;
205
206         hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n));
207
208         while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
209                 cpu_relax();
210         if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
211                 return -EAGAIN;
212
213         /* status shoult be tested according with manual but it doesn't work */
214         return 0;
215 }
216
217 /**
218  * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
219  *                 without interruption)
220  * @num:   endpoint number
221  * @dir:   endpoint direction
222  * @value: true => stall, false => unstall
223  *
224  * This function returns an error code
225  */
226 static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value)
227 {
228         if (value != 0 && value != 1)
229                 return -EINVAL;
230
231         do {
232                 enum ci13xxx_regs reg = OP_ENDPTCTRL + num;
233                 u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
234                 u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
235
236                 /* data toggle - reserved for EP0 but it's in ESS */
237                 hw_write(ci, reg, mask_xs|mask_xr,
238                           value ? mask_xs : mask_xr);
239         } while (value != hw_ep_get_halt(ci, num, dir));
240
241         return 0;
242 }
243
244 /**
245  * hw_is_port_high_speed: test if port is high speed
246  *
247  * This function returns true if high speed port
248  */
249 static int hw_port_is_high_speed(struct ci13xxx *ci)
250 {
251         return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
252                 hw_read(ci, OP_PORTSC, PORTSC_HSP);
253 }
254
255 /**
256  * hw_read_intr_enable: returns interrupt enable register
257  *
258  * This function returns register data
259  */
260 static u32 hw_read_intr_enable(struct ci13xxx *ci)
261 {
262         return hw_read(ci, OP_USBINTR, ~0);
263 }
264
265 /**
266  * hw_read_intr_status: returns interrupt status register
267  *
268  * This function returns register data
269  */
270 static u32 hw_read_intr_status(struct ci13xxx *ci)
271 {
272         return hw_read(ci, OP_USBSTS, ~0);
273 }
274
275 /**
276  * hw_test_and_clear_complete: test & clear complete status (execute without
277  *                             interruption)
278  * @n: endpoint number
279  *
280  * This function returns complete status
281  */
282 static int hw_test_and_clear_complete(struct ci13xxx *ci, int n)
283 {
284         n = ep_to_bit(ci, n);
285         return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
286 }
287
288 /**
289  * hw_test_and_clear_intr_active: test & clear active interrupts (execute
290  *                                without interruption)
291  *
292  * This function returns active interrutps
293  */
294 static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
295 {
296         u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
297
298         hw_write(ci, OP_USBSTS, ~0, reg);
299         return reg;
300 }
301
302 /**
303  * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
304  *                                interruption)
305  *
306  * This function returns guard value
307  */
308 static int hw_test_and_clear_setup_guard(struct ci13xxx *ci)
309 {
310         return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
311 }
312
313 /**
314  * hw_test_and_set_setup_guard: test & set setup guard (execute without
315  *                              interruption)
316  *
317  * This function returns guard value
318  */
319 static int hw_test_and_set_setup_guard(struct ci13xxx *ci)
320 {
321         return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
322 }
323
324 /**
325  * hw_usb_set_address: configures USB address (execute without interruption)
326  * @value: new USB address
327  *
328  * This function explicitly sets the address, without the "USBADRA" (advance)
329  * feature, which is not supported by older versions of the controller.
330  */
331 static void hw_usb_set_address(struct ci13xxx *ci, u8 value)
332 {
333         hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
334                  value << __ffs(DEVICEADDR_USBADR));
335 }
336
337 /**
338  * hw_usb_reset: restart device after a bus reset (execute without
339  *               interruption)
340  *
341  * This function returns an error code
342  */
343 static int hw_usb_reset(struct ci13xxx *ci)
344 {
345         hw_usb_set_address(ci, 0);
346
347         /* ESS flushes only at end?!? */
348         hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
349
350         /* clear setup token semaphores */
351         hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
352
353         /* clear complete status */
354         hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
355
356         /* wait until all bits cleared */
357         while (hw_read(ci, OP_ENDPTPRIME, ~0))
358                 udelay(10);             /* not RTOS friendly */
359
360         /* reset all endpoints ? */
361
362         /* reset internal status and wait for further instructions
363            no need to verify the port reset status (ESS does it) */
364
365         return 0;
366 }
367
368 /******************************************************************************
369  * UTIL block
370  *****************************************************************************/
371 /**
372  * _usb_addr: calculates endpoint address from direction & number
373  * @ep:  endpoint
374  */
375 static inline u8 _usb_addr(struct ci13xxx_ep *ep)
376 {
377         return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
378 }
379
380 /**
381  * _hardware_queue: configures a request at hardware level
382  * @gadget: gadget
383  * @mEp:    endpoint
384  *
385  * This function returns an error code
386  */
387 static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
388 {
389         struct ci13xxx *ci = mEp->ci;
390         unsigned i;
391         int ret = 0;
392         unsigned length = mReq->req.length;
393
394         /* don't queue twice */
395         if (mReq->req.status == -EALREADY)
396                 return -EALREADY;
397
398         mReq->req.status = -EALREADY;
399
400         if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) {
401                 mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC,
402                                            &mReq->zdma);
403                 if (mReq->zptr == NULL)
404                         return -ENOMEM;
405
406                 memset(mReq->zptr, 0, sizeof(*mReq->zptr));
407                 mReq->zptr->next    = cpu_to_le32(TD_TERMINATE);
408                 mReq->zptr->token   = cpu_to_le32(TD_STATUS_ACTIVE);
409                 if (!mReq->req.no_interrupt)
410                         mReq->zptr->token   |= cpu_to_le32(TD_IOC);
411         }
412         ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir);
413         if (ret)
414                 return ret;
415
416         /*
417          * TD configuration
418          * TODO - handle requests which spawns into several TDs
419          */
420         memset(mReq->ptr, 0, sizeof(*mReq->ptr));
421         mReq->ptr->token    = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
422         mReq->ptr->token   &= cpu_to_le32(TD_TOTAL_BYTES);
423         mReq->ptr->token   |= cpu_to_le32(TD_STATUS_ACTIVE);
424         if (mReq->zptr) {
425                 mReq->ptr->next    = cpu_to_le32(mReq->zdma);
426         } else {
427                 mReq->ptr->next    = cpu_to_le32(TD_TERMINATE);
428                 if (!mReq->req.no_interrupt)
429                         mReq->ptr->token  |= cpu_to_le32(TD_IOC);
430         }
431         mReq->ptr->page[0]  = cpu_to_le32(mReq->req.dma);
432         for (i = 1; i < TD_PAGE_COUNT; i++) {
433                 u32 page = mReq->req.dma + i * CI13XXX_PAGE_SIZE;
434                 page &= ~TD_RESERVED_MASK;
435                 mReq->ptr->page[i] = cpu_to_le32(page);
436         }
437
438         wmb();
439
440         if (!list_empty(&mEp->qh.queue)) {
441                 struct ci13xxx_req *mReqPrev;
442                 int n = hw_ep_bit(mEp->num, mEp->dir);
443                 int tmp_stat;
444                 u32 next = mReq->dma & TD_ADDR_MASK;
445
446                 mReqPrev = list_entry(mEp->qh.queue.prev,
447                                 struct ci13xxx_req, queue);
448                 if (mReqPrev->zptr)
449                         mReqPrev->zptr->next = cpu_to_le32(next);
450                 else
451                         mReqPrev->ptr->next = cpu_to_le32(next);
452                 wmb();
453                 if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
454                         goto done;
455                 do {
456                         hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
457                         tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
458                 } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
459                 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
460                 if (tmp_stat)
461                         goto done;
462         }
463
464         /*  QH configuration */
465         mEp->qh.ptr->td.next   = cpu_to_le32(mReq->dma);    /* TERMINATE = 0 */
466         mEp->qh.ptr->td.token &=
467                 cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
468
469         wmb();   /* synchronize before ep prime */
470
471         ret = hw_ep_prime(ci, mEp->num, mEp->dir,
472                            mEp->type == USB_ENDPOINT_XFER_CONTROL);
473 done:
474         return ret;
475 }
476
477 /**
478  * _hardware_dequeue: handles a request at hardware level
479  * @gadget: gadget
480  * @mEp:    endpoint
481  *
482  * This function returns an error code
483  */
484 static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
485 {
486         u32 tmptoken = le32_to_cpu(mReq->ptr->token);
487
488         if (mReq->req.status != -EALREADY)
489                 return -EINVAL;
490
491         if ((TD_STATUS_ACTIVE & tmptoken) != 0)
492                 return -EBUSY;
493
494         if (mReq->zptr) {
495                 if ((cpu_to_le32(TD_STATUS_ACTIVE) & mReq->zptr->token) != 0)
496                         return -EBUSY;
497                 dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
498                 mReq->zptr = NULL;
499         }
500
501         mReq->req.status = 0;
502
503         usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir);
504
505         mReq->req.status = tmptoken & TD_STATUS;
506         if ((TD_STATUS_HALTED & mReq->req.status) != 0)
507                 mReq->req.status = -1;
508         else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0)
509                 mReq->req.status = -1;
510         else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0)
511                 mReq->req.status = -1;
512
513         mReq->req.actual   = tmptoken & TD_TOTAL_BYTES;
514         mReq->req.actual >>= __ffs(TD_TOTAL_BYTES);
515         mReq->req.actual   = mReq->req.length - mReq->req.actual;
516         mReq->req.actual   = mReq->req.status ? 0 : mReq->req.actual;
517
518         return mReq->req.actual;
519 }
520
521 /**
522  * _ep_nuke: dequeues all endpoint requests
523  * @mEp: endpoint
524  *
525  * This function returns an error code
526  * Caller must hold lock
527  */
528 static int _ep_nuke(struct ci13xxx_ep *mEp)
529 __releases(mEp->lock)
530 __acquires(mEp->lock)
531 {
532         if (mEp == NULL)
533                 return -EINVAL;
534
535         hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
536
537         while (!list_empty(&mEp->qh.queue)) {
538
539                 /* pop oldest request */
540                 struct ci13xxx_req *mReq = \
541                         list_entry(mEp->qh.queue.next,
542                                    struct ci13xxx_req, queue);
543
544                 if (mReq->zptr) {
545                         dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
546                         mReq->zptr = NULL;
547                 }
548
549                 list_del_init(&mReq->queue);
550                 mReq->req.status = -ESHUTDOWN;
551
552                 if (mReq->req.complete != NULL) {
553                         spin_unlock(mEp->lock);
554                         mReq->req.complete(&mEp->ep, &mReq->req);
555                         spin_lock(mEp->lock);
556                 }
557         }
558         return 0;
559 }
560
561 /**
562  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
563  * @gadget: gadget
564  *
565  * This function returns an error code
566  */
567 static int _gadget_stop_activity(struct usb_gadget *gadget)
568 {
569         struct usb_ep *ep;
570         struct ci13xxx    *ci = container_of(gadget, struct ci13xxx, gadget);
571         unsigned long flags;
572
573         spin_lock_irqsave(&ci->lock, flags);
574         ci->gadget.speed = USB_SPEED_UNKNOWN;
575         ci->remote_wakeup = 0;
576         ci->suspended = 0;
577         spin_unlock_irqrestore(&ci->lock, flags);
578
579         /* flush all endpoints */
580         gadget_for_each_ep(ep, gadget) {
581                 usb_ep_fifo_flush(ep);
582         }
583         usb_ep_fifo_flush(&ci->ep0out->ep);
584         usb_ep_fifo_flush(&ci->ep0in->ep);
585
586         if (ci->driver)
587                 ci->driver->disconnect(gadget);
588
589         /* make sure to disable all endpoints */
590         gadget_for_each_ep(ep, gadget) {
591                 usb_ep_disable(ep);
592         }
593
594         if (ci->status != NULL) {
595                 usb_ep_free_request(&ci->ep0in->ep, ci->status);
596                 ci->status = NULL;
597         }
598
599         return 0;
600 }
601
602 /******************************************************************************
603  * ISR block
604  *****************************************************************************/
605 /**
606  * isr_reset_handler: USB reset interrupt handler
607  * @ci: UDC device
608  *
609  * This function resets USB engine after a bus reset occurred
610  */
611 static void isr_reset_handler(struct ci13xxx *ci)
612 __releases(ci->lock)
613 __acquires(ci->lock)
614 {
615         int retval;
616
617         spin_unlock(&ci->lock);
618         retval = _gadget_stop_activity(&ci->gadget);
619         if (retval)
620                 goto done;
621
622         retval = hw_usb_reset(ci);
623         if (retval)
624                 goto done;
625
626         ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
627         if (ci->status == NULL)
628                 retval = -ENOMEM;
629
630 done:
631         spin_lock(&ci->lock);
632
633         if (retval)
634                 dev_err(ci->dev, "error: %i\n", retval);
635 }
636
637 /**
638  * isr_get_status_complete: get_status request complete function
639  * @ep:  endpoint
640  * @req: request handled
641  *
642  * Caller must release lock
643  */
644 static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
645 {
646         if (ep == NULL || req == NULL)
647                 return;
648
649         kfree(req->buf);
650         usb_ep_free_request(ep, req);
651 }
652
653 /**
654  * _ep_queue: queues (submits) an I/O request to an endpoint
655  *
656  * Caller must hold lock
657  */
658 static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
659                     gfp_t __maybe_unused gfp_flags)
660 {
661         struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
662         struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
663         struct ci13xxx *ci = mEp->ci;
664         int retval = 0;
665
666         if (ep == NULL || req == NULL || mEp->ep.desc == NULL)
667                 return -EINVAL;
668
669         if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
670                 if (req->length)
671                         mEp = (ci->ep0_dir == RX) ?
672                                ci->ep0out : ci->ep0in;
673                 if (!list_empty(&mEp->qh.queue)) {
674                         _ep_nuke(mEp);
675                         retval = -EOVERFLOW;
676                         dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n",
677                                  _usb_addr(mEp));
678                 }
679         }
680
681         /* first nuke then test link, e.g. previous status has not sent */
682         if (!list_empty(&mReq->queue)) {
683                 dev_err(mEp->ci->dev, "request already in queue\n");
684                 return -EBUSY;
685         }
686
687         if (req->length > (TD_PAGE_COUNT - 1) * CI13XXX_PAGE_SIZE) {
688                 dev_err(mEp->ci->dev, "request bigger than one td\n");
689                 return -EMSGSIZE;
690         }
691
692         /* push request */
693         mReq->req.status = -EINPROGRESS;
694         mReq->req.actual = 0;
695
696         retval = _hardware_enqueue(mEp, mReq);
697
698         if (retval == -EALREADY)
699                 retval = 0;
700         if (!retval)
701                 list_add_tail(&mReq->queue, &mEp->qh.queue);
702
703         return retval;
704 }
705
706 /**
707  * isr_get_status_response: get_status request response
708  * @ci: ci struct
709  * @setup: setup request packet
710  *
711  * This function returns an error code
712  */
713 static int isr_get_status_response(struct ci13xxx *ci,
714                                    struct usb_ctrlrequest *setup)
715 __releases(mEp->lock)
716 __acquires(mEp->lock)
717 {
718         struct ci13xxx_ep *mEp = ci->ep0in;
719         struct usb_request *req = NULL;
720         gfp_t gfp_flags = GFP_ATOMIC;
721         int dir, num, retval;
722
723         if (mEp == NULL || setup == NULL)
724                 return -EINVAL;
725
726         spin_unlock(mEp->lock);
727         req = usb_ep_alloc_request(&mEp->ep, gfp_flags);
728         spin_lock(mEp->lock);
729         if (req == NULL)
730                 return -ENOMEM;
731
732         req->complete = isr_get_status_complete;
733         req->length   = 2;
734         req->buf      = kzalloc(req->length, gfp_flags);
735         if (req->buf == NULL) {
736                 retval = -ENOMEM;
737                 goto err_free_req;
738         }
739
740         if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
741                 /* Assume that device is bus powered for now. */
742                 *(u16 *)req->buf = ci->remote_wakeup << 1;
743                 retval = 0;
744         } else if ((setup->bRequestType & USB_RECIP_MASK) \
745                    == USB_RECIP_ENDPOINT) {
746                 dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
747                         TX : RX;
748                 num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
749                 *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
750         }
751         /* else do nothing; reserved for future use */
752
753         retval = _ep_queue(&mEp->ep, req, gfp_flags);
754         if (retval)
755                 goto err_free_buf;
756
757         return 0;
758
759  err_free_buf:
760         kfree(req->buf);
761  err_free_req:
762         spin_unlock(mEp->lock);
763         usb_ep_free_request(&mEp->ep, req);
764         spin_lock(mEp->lock);
765         return retval;
766 }
767
768 /**
769  * isr_setup_status_complete: setup_status request complete function
770  * @ep:  endpoint
771  * @req: request handled
772  *
773  * Caller must release lock. Put the port in test mode if test mode
774  * feature is selected.
775  */
776 static void
777 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
778 {
779         struct ci13xxx *ci = req->context;
780         unsigned long flags;
781
782         if (ci->setaddr) {
783                 hw_usb_set_address(ci, ci->address);
784                 ci->setaddr = false;
785         }
786
787         spin_lock_irqsave(&ci->lock, flags);
788         if (ci->test_mode)
789                 hw_port_test_set(ci, ci->test_mode);
790         spin_unlock_irqrestore(&ci->lock, flags);
791 }
792
793 /**
794  * isr_setup_status_phase: queues the status phase of a setup transation
795  * @ci: ci struct
796  *
797  * This function returns an error code
798  */
799 static int isr_setup_status_phase(struct ci13xxx *ci)
800 {
801         int retval;
802         struct ci13xxx_ep *mEp;
803
804         mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
805         ci->status->context = ci;
806         ci->status->complete = isr_setup_status_complete;
807
808         retval = _ep_queue(&mEp->ep, ci->status, GFP_ATOMIC);
809
810         return retval;
811 }
812
813 /**
814  * isr_tr_complete_low: transaction complete low level handler
815  * @mEp: endpoint
816  *
817  * This function returns an error code
818  * Caller must hold lock
819  */
820 static int isr_tr_complete_low(struct ci13xxx_ep *mEp)
821 __releases(mEp->lock)
822 __acquires(mEp->lock)
823 {
824         struct ci13xxx_req *mReq, *mReqTemp;
825         struct ci13xxx_ep *mEpTemp = mEp;
826         int retval = 0;
827
828         list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
829                         queue) {
830                 retval = _hardware_dequeue(mEp, mReq);
831                 if (retval < 0)
832                         break;
833                 list_del_init(&mReq->queue);
834                 if (mReq->req.complete != NULL) {
835                         spin_unlock(mEp->lock);
836                         if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
837                                         mReq->req.length)
838                                 mEpTemp = mEp->ci->ep0in;
839                         mReq->req.complete(&mEpTemp->ep, &mReq->req);
840                         spin_lock(mEp->lock);
841                 }
842         }
843
844         if (retval == -EBUSY)
845                 retval = 0;
846
847         return retval;
848 }
849
850 /**
851  * isr_tr_complete_handler: transaction complete interrupt handler
852  * @ci: UDC descriptor
853  *
854  * This function handles traffic events
855  */
856 static void isr_tr_complete_handler(struct ci13xxx *ci)
857 __releases(ci->lock)
858 __acquires(ci->lock)
859 {
860         unsigned i;
861         u8 tmode = 0;
862
863         for (i = 0; i < ci->hw_ep_max; i++) {
864                 struct ci13xxx_ep *mEp  = &ci->ci13xxx_ep[i];
865                 int type, num, dir, err = -EINVAL;
866                 struct usb_ctrlrequest req;
867
868                 if (mEp->ep.desc == NULL)
869                         continue;   /* not configured */
870
871                 if (hw_test_and_clear_complete(ci, i)) {
872                         err = isr_tr_complete_low(mEp);
873                         if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
874                                 if (err > 0)   /* needs status phase */
875                                         err = isr_setup_status_phase(ci);
876                                 if (err < 0) {
877                                         spin_unlock(&ci->lock);
878                                         if (usb_ep_set_halt(&mEp->ep))
879                                                 dev_err(ci->dev,
880                                                         "error: ep_set_halt\n");
881                                         spin_lock(&ci->lock);
882                                 }
883                         }
884                 }
885
886                 if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
887                     !hw_test_and_clear_setup_status(ci, i))
888                         continue;
889
890                 if (i != 0) {
891                         dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i);
892                         continue;
893                 }
894
895                 /*
896                  * Flush data and handshake transactions of previous
897                  * setup packet.
898                  */
899                 _ep_nuke(ci->ep0out);
900                 _ep_nuke(ci->ep0in);
901
902                 /* read_setup_packet */
903                 do {
904                         hw_test_and_set_setup_guard(ci);
905                         memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
906                 } while (!hw_test_and_clear_setup_guard(ci));
907
908                 type = req.bRequestType;
909
910                 ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
911
912                 switch (req.bRequest) {
913                 case USB_REQ_CLEAR_FEATURE:
914                         if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
915                                         le16_to_cpu(req.wValue) ==
916                                         USB_ENDPOINT_HALT) {
917                                 if (req.wLength != 0)
918                                         break;
919                                 num  = le16_to_cpu(req.wIndex);
920                                 dir = num & USB_ENDPOINT_DIR_MASK;
921                                 num &= USB_ENDPOINT_NUMBER_MASK;
922                                 if (dir) /* TX */
923                                         num += ci->hw_ep_max/2;
924                                 if (!ci->ci13xxx_ep[num].wedge) {
925                                         spin_unlock(&ci->lock);
926                                         err = usb_ep_clear_halt(
927                                                 &ci->ci13xxx_ep[num].ep);
928                                         spin_lock(&ci->lock);
929                                         if (err)
930                                                 break;
931                                 }
932                                 err = isr_setup_status_phase(ci);
933                         } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
934                                         le16_to_cpu(req.wValue) ==
935                                         USB_DEVICE_REMOTE_WAKEUP) {
936                                 if (req.wLength != 0)
937                                         break;
938                                 ci->remote_wakeup = 0;
939                                 err = isr_setup_status_phase(ci);
940                         } else {
941                                 goto delegate;
942                         }
943                         break;
944                 case USB_REQ_GET_STATUS:
945                         if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
946                             type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
947                             type != (USB_DIR_IN|USB_RECIP_INTERFACE))
948                                 goto delegate;
949                         if (le16_to_cpu(req.wLength) != 2 ||
950                             le16_to_cpu(req.wValue)  != 0)
951                                 break;
952                         err = isr_get_status_response(ci, &req);
953                         break;
954                 case USB_REQ_SET_ADDRESS:
955                         if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
956                                 goto delegate;
957                         if (le16_to_cpu(req.wLength) != 0 ||
958                             le16_to_cpu(req.wIndex)  != 0)
959                                 break;
960                         ci->address = (u8)le16_to_cpu(req.wValue);
961                         ci->setaddr = true;
962                         err = isr_setup_status_phase(ci);
963                         break;
964                 case USB_REQ_SET_FEATURE:
965                         if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
966                                         le16_to_cpu(req.wValue) ==
967                                         USB_ENDPOINT_HALT) {
968                                 if (req.wLength != 0)
969                                         break;
970                                 num  = le16_to_cpu(req.wIndex);
971                                 dir = num & USB_ENDPOINT_DIR_MASK;
972                                 num &= USB_ENDPOINT_NUMBER_MASK;
973                                 if (dir) /* TX */
974                                         num += ci->hw_ep_max/2;
975
976                                 spin_unlock(&ci->lock);
977                                 err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep);
978                                 spin_lock(&ci->lock);
979                                 if (!err)
980                                         isr_setup_status_phase(ci);
981                         } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
982                                 if (req.wLength != 0)
983                                         break;
984                                 switch (le16_to_cpu(req.wValue)) {
985                                 case USB_DEVICE_REMOTE_WAKEUP:
986                                         ci->remote_wakeup = 1;
987                                         err = isr_setup_status_phase(ci);
988                                         break;
989                                 case USB_DEVICE_TEST_MODE:
990                                         tmode = le16_to_cpu(req.wIndex) >> 8;
991                                         switch (tmode) {
992                                         case TEST_J:
993                                         case TEST_K:
994                                         case TEST_SE0_NAK:
995                                         case TEST_PACKET:
996                                         case TEST_FORCE_EN:
997                                                 ci->test_mode = tmode;
998                                                 err = isr_setup_status_phase(
999                                                                 ci);
1000                                                 break;
1001                                         default:
1002                                                 break;
1003                                         }
1004                                 default:
1005                                         goto delegate;
1006                                 }
1007                         } else {
1008                                 goto delegate;
1009                         }
1010                         break;
1011                 default:
1012 delegate:
1013                         if (req.wLength == 0)   /* no data phase */
1014                                 ci->ep0_dir = TX;
1015
1016                         spin_unlock(&ci->lock);
1017                         err = ci->driver->setup(&ci->gadget, &req);
1018                         spin_lock(&ci->lock);
1019                         break;
1020                 }
1021
1022                 if (err < 0) {
1023                         spin_unlock(&ci->lock);
1024                         if (usb_ep_set_halt(&mEp->ep))
1025                                 dev_err(ci->dev, "error: ep_set_halt\n");
1026                         spin_lock(&ci->lock);
1027                 }
1028         }
1029 }
1030
1031 /******************************************************************************
1032  * ENDPT block
1033  *****************************************************************************/
1034 /**
1035  * ep_enable: configure endpoint, making it usable
1036  *
1037  * Check usb_ep_enable() at "usb_gadget.h" for details
1038  */
1039 static int ep_enable(struct usb_ep *ep,
1040                      const struct usb_endpoint_descriptor *desc)
1041 {
1042         struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
1043         int retval = 0;
1044         unsigned long flags;
1045         u32 cap = 0;
1046
1047         if (ep == NULL || desc == NULL)
1048                 return -EINVAL;
1049
1050         spin_lock_irqsave(mEp->lock, flags);
1051
1052         /* only internal SW should enable ctrl endpts */
1053
1054         mEp->ep.desc = desc;
1055
1056         if (!list_empty(&mEp->qh.queue))
1057                 dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n");
1058
1059         mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
1060         mEp->num  = usb_endpoint_num(desc);
1061         mEp->type = usb_endpoint_type(desc);
1062
1063         mEp->ep.maxpacket = usb_endpoint_maxp(desc);
1064
1065         if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
1066                 cap |= QH_IOS;
1067         if (mEp->num)
1068                 cap |= QH_ZLT;
1069         cap |= (mEp->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
1070
1071         mEp->qh.ptr->cap = cpu_to_le32(cap);
1072
1073         mEp->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */
1074
1075         /*
1076          * Enable endpoints in the HW other than ep0 as ep0
1077          * is always enabled
1078          */
1079         if (mEp->num)
1080                 retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type);
1081
1082         spin_unlock_irqrestore(mEp->lock, flags);
1083         return retval;
1084 }
1085
1086 /**
1087  * ep_disable: endpoint is no longer usable
1088  *
1089  * Check usb_ep_disable() at "usb_gadget.h" for details
1090  */
1091 static int ep_disable(struct usb_ep *ep)
1092 {
1093         struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
1094         int direction, retval = 0;
1095         unsigned long flags;
1096
1097         if (ep == NULL)
1098                 return -EINVAL;
1099         else if (mEp->ep.desc == NULL)
1100                 return -EBUSY;
1101
1102         spin_lock_irqsave(mEp->lock, flags);
1103
1104         /* only internal SW should disable ctrl endpts */
1105
1106         direction = mEp->dir;
1107         do {
1108                 retval |= _ep_nuke(mEp);
1109                 retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir);
1110
1111                 if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
1112                         mEp->dir = (mEp->dir == TX) ? RX : TX;
1113
1114         } while (mEp->dir != direction);
1115
1116         mEp->ep.desc = NULL;
1117
1118         spin_unlock_irqrestore(mEp->lock, flags);
1119         return retval;
1120 }
1121
1122 /**
1123  * ep_alloc_request: allocate a request object to use with this endpoint
1124  *
1125  * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1126  */
1127 static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1128 {
1129         struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep);
1130         struct ci13xxx_req *mReq = NULL;
1131
1132         if (ep == NULL)
1133                 return NULL;
1134
1135         mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
1136         if (mReq != NULL) {
1137                 INIT_LIST_HEAD(&mReq->queue);
1138
1139                 mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
1140                                            &mReq->dma);
1141                 if (mReq->ptr == NULL) {
1142                         kfree(mReq);
1143                         mReq = NULL;
1144                 }
1145         }
1146
1147         return (mReq == NULL) ? NULL : &mReq->req;
1148 }
1149
1150 /**
1151  * ep_free_request: frees a request object
1152  *
1153  * Check usb_ep_free_request() at "usb_gadget.h" for details
1154  */
1155 static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
1156 {
1157         struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
1158         struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
1159         unsigned long flags;
1160
1161         if (ep == NULL || req == NULL) {
1162                 return;
1163         } else if (!list_empty(&mReq->queue)) {
1164                 dev_err(mEp->ci->dev, "freeing queued request\n");
1165                 return;
1166         }
1167
1168         spin_lock_irqsave(mEp->lock, flags);
1169
1170         if (mReq->ptr)
1171                 dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma);
1172         kfree(mReq);
1173
1174         spin_unlock_irqrestore(mEp->lock, flags);
1175 }
1176
1177 /**
1178  * ep_queue: queues (submits) an I/O request to an endpoint
1179  *
1180  * Check usb_ep_queue()* at usb_gadget.h" for details
1181  */
1182 static int ep_queue(struct usb_ep *ep, struct usb_request *req,
1183                     gfp_t __maybe_unused gfp_flags)
1184 {
1185         struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
1186         int retval = 0;
1187         unsigned long flags;
1188
1189         if (ep == NULL || req == NULL || mEp->ep.desc == NULL)
1190                 return -EINVAL;
1191
1192         spin_lock_irqsave(mEp->lock, flags);
1193         retval = _ep_queue(ep, req, gfp_flags);
1194         spin_unlock_irqrestore(mEp->lock, flags);
1195         return retval;
1196 }
1197
1198 /**
1199  * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1200  *
1201  * Check usb_ep_dequeue() at "usb_gadget.h" for details
1202  */
1203 static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
1204 {
1205         struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
1206         struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
1207         unsigned long flags;
1208
1209         if (ep == NULL || req == NULL || mReq->req.status != -EALREADY ||
1210                 mEp->ep.desc == NULL || list_empty(&mReq->queue) ||
1211                 list_empty(&mEp->qh.queue))
1212                 return -EINVAL;
1213
1214         spin_lock_irqsave(mEp->lock, flags);
1215
1216         hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
1217
1218         /* pop request */
1219         list_del_init(&mReq->queue);
1220
1221         usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir);
1222
1223         req->status = -ECONNRESET;
1224
1225         if (mReq->req.complete != NULL) {
1226                 spin_unlock(mEp->lock);
1227                 mReq->req.complete(&mEp->ep, &mReq->req);
1228                 spin_lock(mEp->lock);
1229         }
1230
1231         spin_unlock_irqrestore(mEp->lock, flags);
1232         return 0;
1233 }
1234
1235 /**
1236  * ep_set_halt: sets the endpoint halt feature
1237  *
1238  * Check usb_ep_set_halt() at "usb_gadget.h" for details
1239  */
1240 static int ep_set_halt(struct usb_ep *ep, int value)
1241 {
1242         struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
1243         int direction, retval = 0;
1244         unsigned long flags;
1245
1246         if (ep == NULL || mEp->ep.desc == NULL)
1247                 return -EINVAL;
1248
1249         spin_lock_irqsave(mEp->lock, flags);
1250
1251 #ifndef STALL_IN
1252         /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
1253         if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
1254             !list_empty(&mEp->qh.queue)) {
1255                 spin_unlock_irqrestore(mEp->lock, flags);
1256                 return -EAGAIN;
1257         }
1258 #endif
1259
1260         direction = mEp->dir;
1261         do {
1262                 retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value);
1263
1264                 if (!value)
1265                         mEp->wedge = 0;
1266
1267                 if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
1268                         mEp->dir = (mEp->dir == TX) ? RX : TX;
1269
1270         } while (mEp->dir != direction);
1271
1272         spin_unlock_irqrestore(mEp->lock, flags);
1273         return retval;
1274 }
1275
1276 /**
1277  * ep_set_wedge: sets the halt feature and ignores clear requests
1278  *
1279  * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1280  */
1281 static int ep_set_wedge(struct usb_ep *ep)
1282 {
1283         struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
1284         unsigned long flags;
1285
1286         if (ep == NULL || mEp->ep.desc == NULL)
1287                 return -EINVAL;
1288
1289         spin_lock_irqsave(mEp->lock, flags);
1290         mEp->wedge = 1;
1291         spin_unlock_irqrestore(mEp->lock, flags);
1292
1293         return usb_ep_set_halt(ep);
1294 }
1295
1296 /**
1297  * ep_fifo_flush: flushes contents of a fifo
1298  *
1299  * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1300  */
1301 static void ep_fifo_flush(struct usb_ep *ep)
1302 {
1303         struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
1304         unsigned long flags;
1305
1306         if (ep == NULL) {
1307                 dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
1308                 return;
1309         }
1310
1311         spin_lock_irqsave(mEp->lock, flags);
1312
1313         hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
1314
1315         spin_unlock_irqrestore(mEp->lock, flags);
1316 }
1317
1318 /**
1319  * Endpoint-specific part of the API to the USB controller hardware
1320  * Check "usb_gadget.h" for details
1321  */
1322 static const struct usb_ep_ops usb_ep_ops = {
1323         .enable        = ep_enable,
1324         .disable       = ep_disable,
1325         .alloc_request = ep_alloc_request,
1326         .free_request  = ep_free_request,
1327         .queue         = ep_queue,
1328         .dequeue       = ep_dequeue,
1329         .set_halt      = ep_set_halt,
1330         .set_wedge     = ep_set_wedge,
1331         .fifo_flush    = ep_fifo_flush,
1332 };
1333
1334 /******************************************************************************
1335  * GADGET block
1336  *****************************************************************************/
1337 static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
1338 {
1339         struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
1340         unsigned long flags;
1341         int gadget_ready = 0;
1342
1343         if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
1344                 return -EOPNOTSUPP;
1345
1346         spin_lock_irqsave(&ci->lock, flags);
1347         ci->vbus_active = is_active;
1348         if (ci->driver)
1349                 gadget_ready = 1;
1350         spin_unlock_irqrestore(&ci->lock, flags);
1351
1352         if (gadget_ready) {
1353                 if (is_active) {
1354                         pm_runtime_get_sync(&_gadget->dev);
1355                         hw_device_reset(ci, USBMODE_CM_DC);
1356                         hw_device_state(ci, ci->ep0out->qh.dma);
1357                 } else {
1358                         hw_device_state(ci, 0);
1359                         if (ci->platdata->notify_event)
1360                                 ci->platdata->notify_event(ci,
1361                                 CI13XXX_CONTROLLER_STOPPED_EVENT);
1362                         _gadget_stop_activity(&ci->gadget);
1363                         pm_runtime_put_sync(&_gadget->dev);
1364                 }
1365         }
1366
1367         return 0;
1368 }
1369
1370 static int ci13xxx_wakeup(struct usb_gadget *_gadget)
1371 {
1372         struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
1373         unsigned long flags;
1374         int ret = 0;
1375
1376         spin_lock_irqsave(&ci->lock, flags);
1377         if (!ci->remote_wakeup) {
1378                 ret = -EOPNOTSUPP;
1379                 goto out;
1380         }
1381         if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
1382                 ret = -EINVAL;
1383                 goto out;
1384         }
1385         hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
1386 out:
1387         spin_unlock_irqrestore(&ci->lock, flags);
1388         return ret;
1389 }
1390
1391 static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
1392 {
1393         struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
1394
1395         if (ci->transceiver)
1396                 return usb_phy_set_power(ci->transceiver, mA);
1397         return -ENOTSUPP;
1398 }
1399
1400 /* Change Data+ pullup status
1401  * this func is used by usb_gadget_connect/disconnet
1402  */
1403 static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
1404 {
1405         struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
1406
1407         if (is_on)
1408                 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
1409         else
1410                 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
1411
1412         return 0;
1413 }
1414
1415 static int ci13xxx_start(struct usb_gadget *gadget,
1416                          struct usb_gadget_driver *driver);
1417 static int ci13xxx_stop(struct usb_gadget *gadget,
1418                         struct usb_gadget_driver *driver);
1419 /**
1420  * Device operations part of the API to the USB controller hardware,
1421  * which don't involve endpoints (or i/o)
1422  * Check  "usb_gadget.h" for details
1423  */
1424 static const struct usb_gadget_ops usb_gadget_ops = {
1425         .vbus_session   = ci13xxx_vbus_session,
1426         .wakeup         = ci13xxx_wakeup,
1427         .pullup         = ci13xxx_pullup,
1428         .vbus_draw      = ci13xxx_vbus_draw,
1429         .udc_start      = ci13xxx_start,
1430         .udc_stop       = ci13xxx_stop,
1431 };
1432
1433 static int init_eps(struct ci13xxx *ci)
1434 {
1435         int retval = 0, i, j;
1436
1437         for (i = 0; i < ci->hw_ep_max/2; i++)
1438                 for (j = RX; j <= TX; j++) {
1439                         int k = i + j * ci->hw_ep_max/2;
1440                         struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k];
1441
1442                         scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
1443                                         (j == TX)  ? "in" : "out");
1444
1445                         mEp->ci          = ci;
1446                         mEp->lock         = &ci->lock;
1447                         mEp->td_pool      = ci->td_pool;
1448
1449                         mEp->ep.name      = mEp->name;
1450                         mEp->ep.ops       = &usb_ep_ops;
1451                         /*
1452                          * for ep0: maxP defined in desc, for other
1453                          * eps, maxP is set by epautoconfig() called
1454                          * by gadget layer
1455                          */
1456                         mEp->ep.maxpacket = (unsigned short)~0;
1457
1458                         INIT_LIST_HEAD(&mEp->qh.queue);
1459                         mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
1460                                                      &mEp->qh.dma);
1461                         if (mEp->qh.ptr == NULL)
1462                                 retval = -ENOMEM;
1463                         else
1464                                 memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
1465
1466                         /*
1467                          * set up shorthands for ep0 out and in endpoints,
1468                          * don't add to gadget's ep_list
1469                          */
1470                         if (i == 0) {
1471                                 if (j == RX)
1472                                         ci->ep0out = mEp;
1473                                 else
1474                                         ci->ep0in = mEp;
1475
1476                                 mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
1477                                 continue;
1478                         }
1479
1480                         list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list);
1481                 }
1482
1483         return retval;
1484 }
1485
1486 static void destroy_eps(struct ci13xxx *ci)
1487 {
1488         int i;
1489
1490         for (i = 0; i < ci->hw_ep_max; i++) {
1491                 struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
1492
1493                 dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
1494         }
1495 }
1496
1497 /**
1498  * ci13xxx_start: register a gadget driver
1499  * @gadget: our gadget
1500  * @driver: the driver being registered
1501  *
1502  * Interrupts are enabled here.
1503  */
1504 static int ci13xxx_start(struct usb_gadget *gadget,
1505                          struct usb_gadget_driver *driver)
1506 {
1507         struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
1508         unsigned long flags;
1509         int retval = -ENOMEM;
1510
1511         if (driver->disconnect == NULL)
1512                 return -EINVAL;
1513
1514
1515         ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
1516         retval = usb_ep_enable(&ci->ep0out->ep);
1517         if (retval)
1518                 return retval;
1519
1520         ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
1521         retval = usb_ep_enable(&ci->ep0in->ep);
1522         if (retval)
1523                 return retval;
1524         spin_lock_irqsave(&ci->lock, flags);
1525
1526         ci->driver = driver;
1527         pm_runtime_get_sync(&ci->gadget.dev);
1528         if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
1529                 if (ci->vbus_active) {
1530                         if (ci->platdata->flags & CI13XXX_REGS_SHARED)
1531                                 hw_device_reset(ci, USBMODE_CM_DC);
1532                 } else {
1533                         pm_runtime_put_sync(&ci->gadget.dev);
1534                         goto done;
1535                 }
1536         }
1537
1538         retval = hw_device_state(ci, ci->ep0out->qh.dma);
1539         if (retval)
1540                 pm_runtime_put_sync(&ci->gadget.dev);
1541
1542  done:
1543         spin_unlock_irqrestore(&ci->lock, flags);
1544         return retval;
1545 }
1546
1547 /**
1548  * ci13xxx_stop: unregister a gadget driver
1549  */
1550 static int ci13xxx_stop(struct usb_gadget *gadget,
1551                         struct usb_gadget_driver *driver)
1552 {
1553         struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
1554         unsigned long flags;
1555
1556         spin_lock_irqsave(&ci->lock, flags);
1557
1558         if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
1559                         ci->vbus_active) {
1560                 hw_device_state(ci, 0);
1561                 if (ci->platdata->notify_event)
1562                         ci->platdata->notify_event(ci,
1563                         CI13XXX_CONTROLLER_STOPPED_EVENT);
1564                 ci->driver = NULL;
1565                 spin_unlock_irqrestore(&ci->lock, flags);
1566                 _gadget_stop_activity(&ci->gadget);
1567                 spin_lock_irqsave(&ci->lock, flags);
1568                 pm_runtime_put(&ci->gadget.dev);
1569         }
1570
1571         spin_unlock_irqrestore(&ci->lock, flags);
1572
1573         return 0;
1574 }
1575
1576 /******************************************************************************
1577  * BUS block
1578  *****************************************************************************/
1579 /**
1580  * udc_irq: ci interrupt handler
1581  *
1582  * This function returns IRQ_HANDLED if the IRQ has been handled
1583  * It locks access to registers
1584  */
1585 static irqreturn_t udc_irq(struct ci13xxx *ci)
1586 {
1587         irqreturn_t retval;
1588         u32 intr;
1589
1590         if (ci == NULL)
1591                 return IRQ_HANDLED;
1592
1593         spin_lock(&ci->lock);
1594
1595         if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
1596                 if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
1597                                 USBMODE_CM_DC) {
1598                         spin_unlock(&ci->lock);
1599                         return IRQ_NONE;
1600                 }
1601         }
1602         intr = hw_test_and_clear_intr_active(ci);
1603
1604         if (intr) {
1605                 /* order defines priority - do NOT change it */
1606                 if (USBi_URI & intr)
1607                         isr_reset_handler(ci);
1608
1609                 if (USBi_PCI & intr) {
1610                         ci->gadget.speed = hw_port_is_high_speed(ci) ?
1611                                 USB_SPEED_HIGH : USB_SPEED_FULL;
1612                         if (ci->suspended && ci->driver->resume) {
1613                                 spin_unlock(&ci->lock);
1614                                 ci->driver->resume(&ci->gadget);
1615                                 spin_lock(&ci->lock);
1616                                 ci->suspended = 0;
1617                         }
1618                 }
1619
1620                 if (USBi_UI  & intr)
1621                         isr_tr_complete_handler(ci);
1622
1623                 if (USBi_SLI & intr) {
1624                         if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
1625                             ci->driver->suspend) {
1626                                 ci->suspended = 1;
1627                                 spin_unlock(&ci->lock);
1628                                 ci->driver->suspend(&ci->gadget);
1629                                 spin_lock(&ci->lock);
1630                         }
1631                 }
1632                 retval = IRQ_HANDLED;
1633         } else {
1634                 retval = IRQ_NONE;
1635         }
1636         spin_unlock(&ci->lock);
1637
1638         return retval;
1639 }
1640
1641 /**
1642  * udc_start: initialize gadget role
1643  * @ci: chipidea controller
1644  */
1645 static int udc_start(struct ci13xxx *ci)
1646 {
1647         struct device *dev = ci->dev;
1648         int retval = 0;
1649
1650         spin_lock_init(&ci->lock);
1651
1652         ci->gadget.ops          = &usb_gadget_ops;
1653         ci->gadget.speed        = USB_SPEED_UNKNOWN;
1654         ci->gadget.max_speed    = USB_SPEED_HIGH;
1655         ci->gadget.is_otg       = 0;
1656         ci->gadget.name         = ci->platdata->name;
1657
1658         INIT_LIST_HEAD(&ci->gadget.ep_list);
1659
1660         /* alloc resources */
1661         ci->qh_pool = dma_pool_create("ci13xxx_qh", dev,
1662                                        sizeof(struct ci13xxx_qh),
1663                                        64, CI13XXX_PAGE_SIZE);
1664         if (ci->qh_pool == NULL)
1665                 return -ENOMEM;
1666
1667         ci->td_pool = dma_pool_create("ci13xxx_td", dev,
1668                                        sizeof(struct ci13xxx_td),
1669                                        64, CI13XXX_PAGE_SIZE);
1670         if (ci->td_pool == NULL) {
1671                 retval = -ENOMEM;
1672                 goto free_qh_pool;
1673         }
1674
1675         retval = init_eps(ci);
1676         if (retval)
1677                 goto free_pools;
1678
1679         ci->gadget.ep0 = &ci->ep0in->ep;
1680
1681         if (ci->global_phy)
1682                 ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
1683
1684         if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
1685                 if (ci->transceiver == NULL) {
1686                         retval = -ENODEV;
1687                         goto destroy_eps;
1688                 }
1689         }
1690
1691         if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) {
1692                 retval = hw_device_reset(ci, USBMODE_CM_DC);
1693                 if (retval)
1694                         goto put_transceiver;
1695         }
1696
1697         if (!IS_ERR_OR_NULL(ci->transceiver)) {
1698                 retval = otg_set_peripheral(ci->transceiver->otg,
1699                                                 &ci->gadget);
1700                 if (retval)
1701                         goto put_transceiver;
1702         }
1703
1704         retval = usb_add_gadget_udc(dev, &ci->gadget);
1705         if (retval)
1706                 goto remove_trans;
1707
1708         pm_runtime_no_callbacks(&ci->gadget.dev);
1709         pm_runtime_enable(&ci->gadget.dev);
1710
1711         return retval;
1712
1713 remove_trans:
1714         if (!IS_ERR_OR_NULL(ci->transceiver)) {
1715                 otg_set_peripheral(ci->transceiver->otg, NULL);
1716                 if (ci->global_phy)
1717                         usb_put_phy(ci->transceiver);
1718         }
1719
1720         dev_err(dev, "error = %i\n", retval);
1721 put_transceiver:
1722         if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
1723                 usb_put_phy(ci->transceiver);
1724 destroy_eps:
1725         destroy_eps(ci);
1726 free_pools:
1727         dma_pool_destroy(ci->td_pool);
1728 free_qh_pool:
1729         dma_pool_destroy(ci->qh_pool);
1730         return retval;
1731 }
1732
1733 /**
1734  * udc_remove: parent remove must call this to remove UDC
1735  *
1736  * No interrupts active, the IRQ has been released
1737  */
1738 static void udc_stop(struct ci13xxx *ci)
1739 {
1740         if (ci == NULL)
1741                 return;
1742
1743         usb_del_gadget_udc(&ci->gadget);
1744
1745         destroy_eps(ci);
1746
1747         dma_pool_destroy(ci->td_pool);
1748         dma_pool_destroy(ci->qh_pool);
1749
1750         if (!IS_ERR_OR_NULL(ci->transceiver)) {
1751                 otg_set_peripheral(ci->transceiver->otg, NULL);
1752                 if (ci->global_phy)
1753                         usb_put_phy(ci->transceiver);
1754         }
1755         /* my kobject is dynamic, I swear! */
1756         memset(&ci->gadget, 0, sizeof(ci->gadget));
1757 }
1758
1759 /**
1760  * ci_hdrc_gadget_init - initialize device related bits
1761  * ci: the controller
1762  *
1763  * This function enables the gadget role, if the device is "device capable".
1764  */
1765 int ci_hdrc_gadget_init(struct ci13xxx *ci)
1766 {
1767         struct ci_role_driver *rdrv;
1768
1769         if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
1770                 return -ENXIO;
1771
1772         rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
1773         if (!rdrv)
1774                 return -ENOMEM;
1775
1776         rdrv->start     = udc_start;
1777         rdrv->stop      = udc_stop;
1778         rdrv->irq       = udc_irq;
1779         rdrv->name      = "gadget";
1780         ci->roles[CI_ROLE_GADGET] = rdrv;
1781
1782         return 0;
1783 }