drivers/scsi/libsas/sas_expander.c

   1 /*
   2  * Serial Attached SCSI (SAS) Expander discovery and configuration
   3  *
   4  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6  *
   7  * This file is licensed under GPLv2.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of the
  12  * License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  22  *
  23  */
  24
  25 #include <linux/scatterlist.h>
  26 #include <linux/blkdev.h>
  27 #include <linux/slab.h>
  28
  29 #include "sas_internal.h"
  30
  31 #include <scsi/sas_ata.h>
  32 #include <scsi/scsi_transport.h>
  33 #include <scsi/scsi_transport_sas.h>
  34 #include "../scsi_sas_internal.h"
  35
  36 static int sas_discover_expander(struct domain_device *dev);
  37 static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
  38 static int sas_configure_phy(struct domain_device *dev, int phy_id,
  39                              u8 *sas_addr, int include);
  40 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
  41
  42 /* ---------- SMP task management ---------- */
  43
  44 static void smp_task_timedout(struct timer_list *t)
  45 {
  46         struct sas_task_slow *slow = from_timer(slow, t, timer);
  47         struct sas_task *task = slow->task;
  48         unsigned long flags;
  49
  50         spin_lock_irqsave(&task->task_state_lock, flags);
  51         if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
  52                 task->task_state_flags |= SAS_TASK_STATE_ABORTED;
  53         spin_unlock_irqrestore(&task->task_state_lock, flags);
  54
  55         complete(&task->slow_task->completion);
  56 }
  57
  58 static void smp_task_done(struct sas_task *task)
  59 {
  60         if (!del_timer(&task->slow_task->timer))
  61                 return;
  62         complete(&task->slow_task->completion);
  63 }
  64
  65 /* Give it some long enough timeout. In seconds. */
  66 #define SMP_TIMEOUT 10
  67
  68 static int smp_execute_task_sg(struct domain_device *dev,
  69                 struct scatterlist *req, struct scatterlist *resp)
  70 {
  71         int res, retry;
  72         struct sas_task *task = NULL;
  73         struct sas_internal *i =
  74                 to_sas_internal(dev->port->ha->core.shost->transportt);
  75
  76         mutex_lock(&dev->ex_dev.cmd_mutex);
  77         for (retry = 0; retry < 3; retry++) {
  78                 if (test_bit(SAS_DEV_GONE, &dev->state)) {
  79                         res = -ECOMM;
  80                         break;
  81                 }
  82
  83                 task = sas_alloc_slow_task(GFP_KERNEL);
  84                 if (!task) {
  85                         res = -ENOMEM;
  86                         break;
  87                 }
  88                 task->dev = dev;
  89                 task->task_proto = dev->tproto;
  90                 task->smp_task.smp_req = *req;
  91                 task->smp_task.smp_resp = *resp;
  92
  93                 task->task_done = smp_task_done;
  94
  95                 task->slow_task->timer.function = smp_task_timedout;
  96                 task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
  97                 add_timer(&task->slow_task->timer);
  98
  99                 res = i->dft->lldd_execute_task(task, GFP_KERNEL);
 100
 101                 if (res) {
 102                         del_timer(&task->slow_task->timer);
 103                         SAS_DPRINTK("executing SMP task failed:%d\n", res);
 104                         break;
 105                 }
 106
 107                 wait_for_completion(&task->slow_task->completion);
 108                 res = -ECOMM;
 109                 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 110                         SAS_DPRINTK("smp task timed out or aborted\n");
 111                         i->dft->lldd_abort_task(task);
 112                         if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 113                                 SAS_DPRINTK("SMP task aborted and not done\n");
 114                                 break;
 115                         }
 116                 }
 117                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
 118                     task->task_status.stat == SAM_STAT_GOOD) {
 119                         res = 0;
 120                         break;
 121                 }
 122                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
 123                     task->task_status.stat == SAS_DATA_UNDERRUN) {
 124                         /* no error, but return the number of bytes of
 125                          * underrun */
 126                         res = task->task_status.residual;
 127                         break;
 128                 }
 129                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
 130                     task->task_status.stat == SAS_DATA_OVERRUN) {
 131                         res = -EMSGSIZE;
 132                         break;
 133                 }
 134                 if (task->task_status.resp == SAS_TASK_UNDELIVERED &&
 135                     task->task_status.stat == SAS_DEVICE_UNKNOWN)
 136                         break;
 137                 else {
 138                         SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
 139                                     "status 0x%x\n", __func__,
 140                                     SAS_ADDR(dev->sas_addr),
 141                                     task->task_status.resp,
 142                                     task->task_status.stat);
 143                         sas_free_task(task);
 144                         task = NULL;
 145                 }
 146         }
 147         mutex_unlock(&dev->ex_dev.cmd_mutex);
 148
 149         BUG_ON(retry == 3 && task != NULL);
 150         sas_free_task(task);
 151         return res;
 152 }
 153
 154 static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
 155                             void *resp, int resp_size)
 156 {
 157         struct scatterlist req_sg;
 158         struct scatterlist resp_sg;
 159
 160         sg_init_one(&req_sg, req, req_size);
 161         sg_init_one(&resp_sg, resp, resp_size);
 162         return smp_execute_task_sg(dev, &req_sg, &resp_sg);
 163 }
 164
 165 /* ---------- Allocations ---------- */
 166
 167 static inline void *alloc_smp_req(int size)
 168 {
 169         u8 *p = kzalloc(size, GFP_KERNEL);
 170         if (p)
 171                 p[0] = SMP_REQUEST;
 172         return p;
 173 }
 174
 175 static inline void *alloc_smp_resp(int size)
 176 {
 177         return kzalloc(size, GFP_KERNEL);
 178 }
 179
 180 static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
 181 {
 182         switch (phy->routing_attr) {
 183         case TABLE_ROUTING:
 184                 if (dev->ex_dev.t2t_supp)
 185                         return 'U';
 186                 else
 187                         return 'T';
 188         case DIRECT_ROUTING:
 189                 return 'D';
 190         case SUBTRACTIVE_ROUTING:
 191                 return 'S';
 192         default:
 193                 return '?';
 194         }
 195 }
 196
 197 static enum sas_device_type to_dev_type(struct discover_resp *dr)
 198 {
 199         /* This is detecting a failure to transmit initial dev to host
 200          * FIS as described in section J.5 of sas-2 r16
 201          */
 202         if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev &&
 203             dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
 204                 return SAS_SATA_PENDING;
 205         else
 206                 return dr->attached_dev_type;
 207 }
 208
 209 static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 210 {
 211         enum sas_device_type dev_type;
 212         enum sas_linkrate linkrate;
 213         u8 sas_addr[SAS_ADDR_SIZE];
 214         struct smp_resp *resp = rsp;
 215         struct discover_resp *dr = &resp->disc;
 216         struct sas_ha_struct *ha = dev->port->ha;
 217         struct expander_device *ex = &dev->ex_dev;
 218         struct ex_phy *phy = &ex->ex_phy[phy_id];
 219         struct sas_rphy *rphy = dev->rphy;
 220         bool new_phy = !phy->phy;
 221         char *type;
 222
 223         if (new_phy) {
 224                 if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)))
 225                         return;
 226                 phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
 227
 228                 /* FIXME: error_handling */
 229                 BUG_ON(!phy->phy);
 230         }
 231
 232         switch (resp->result) {
 233         case SMP_RESP_PHY_VACANT:
 234                 phy->phy_state = PHY_VACANT;
 235                 break;
 236         default:
 237                 phy->phy_state = PHY_NOT_PRESENT;
 238                 break;
 239         case SMP_RESP_FUNC_ACC:
 240                 phy->phy_state = PHY_EMPTY; /* do not know yet */
 241                 break;
 242         }
 243
 244         /* check if anything important changed to squelch debug */
 245         dev_type = phy->attached_dev_type;
 246         linkrate  = phy->linkrate;
 247         memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 248
 249         /* Handle vacant phy - rest of dr data is not valid so skip it */
 250         if (phy->phy_state == PHY_VACANT) {
 251                 memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 252                 phy->attached_dev_type = SAS_PHY_UNUSED;
 253                 if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
 254                         phy->phy_id = phy_id;
 255                         goto skip;
 256                 } else
 257                         goto out;
 258         }
 259
 260         phy->attached_dev_type = to_dev_type(dr);
 261         if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
 262                 goto out;
 263         phy->phy_id = phy_id;
 264         phy->linkrate = dr->linkrate;
 265         phy->attached_sata_host = dr->attached_sata_host;
 266         phy->attached_sata_dev  = dr->attached_sata_dev;
 267         phy->attached_sata_ps   = dr->attached_sata_ps;
 268         phy->attached_iproto = dr->iproto << 1;
 269         phy->attached_tproto = dr->tproto << 1;
 270         /* help some expanders that fail to zero sas_address in the 'no
 271          * device' case
 272          */
 273         if (phy->attached_dev_type == SAS_PHY_UNUSED ||
 274             phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
 275                 memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 276         else
 277                 memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
 278         phy->attached_phy_id = dr->attached_phy_id;
 279         phy->phy_change_count = dr->change_count;
 280         phy->routing_attr = dr->routing_attr;
 281         phy->virtual = dr->virtual;
 282         phy->last_da_index = -1;
 283
 284         phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
 285         phy->phy->identify.device_type = dr->attached_dev_type;
 286         phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 287         phy->phy->identify.target_port_protocols = phy->attached_tproto;
 288         if (!phy->attached_tproto && dr->attached_sata_dev)
 289                 phy->phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
 290         phy->phy->identify.phy_identifier = phy_id;
 291         phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
 292         phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
 293         phy->phy->minimum_linkrate = dr->pmin_linkrate;
 294         phy->phy->maximum_linkrate = dr->pmax_linkrate;
 295         phy->phy->negotiated_linkrate = phy->linkrate;
 296         phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);
 297
 298  skip:
 299         if (new_phy)
 300                 if (sas_phy_add(phy->phy)) {
 301                         sas_phy_free(phy->phy);
 302                         return;
 303                 }
 304
 305  out:
 306         switch (phy->attached_dev_type) {
 307         case SAS_SATA_PENDING:
 308                 type = "stp pending";
 309                 break;
 310         case SAS_PHY_UNUSED:
 311                 type = "no device";
 312                 break;
 313         case SAS_END_DEVICE:
 314                 if (phy->attached_iproto) {
 315                         if (phy->attached_tproto)
 316                                 type = "host+target";
 317                         else
 318                                 type = "host";
 319                 } else {
 320                         if (dr->attached_sata_dev)
 321                                 type = "stp";
 322                         else
 323                                 type = "ssp";
 324                 }
 325                 break;
 326         case SAS_EDGE_EXPANDER_DEVICE:
 327         case SAS_FANOUT_EXPANDER_DEVICE:
 328                 type = "smp";
 329                 break;
 330         default:
 331                 type = "unknown";
 332         }
 333
 334         /* this routine is polled by libata error recovery so filter
 335          * unimportant messages
 336          */
 337         if (new_phy || phy->attached_dev_type != dev_type ||
 338             phy->linkrate != linkrate ||
 339             SAS_ADDR(phy->attached_sas_addr) != SAS_ADDR(sas_addr))
 340                 /* pass */;
 341         else
 342                 return;
 343
 344         /* if the attached device type changed and ata_eh is active,
 345          * make sure we run revalidation when eh completes (see:
 346          * sas_enable_revalidation)
 347          */
 348         if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
 349                 set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending);
 350
 351         SAS_DPRINTK("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
 352                     test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "",
 353                     SAS_ADDR(dev->sas_addr), phy->phy_id,
 354                     sas_route_char(dev, phy), phy->linkrate,
 355                     SAS_ADDR(phy->attached_sas_addr), type);
 356 }
 357
 358 /* check if we have an existing attached ata device on this expander phy */
 359 struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id)
 360 {
 361         struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy_id];
 362         struct domain_device *dev;
 363         struct sas_rphy *rphy;
 364
 365         if (!ex_phy->port)
 366                 return NULL;
 367
 368         rphy = ex_phy->port->rphy;
 369         if (!rphy)
 370                 return NULL;
 371
 372         dev = sas_find_dev_by_rphy(rphy);
 373
 374         if (dev && dev_is_sata(dev))
 375                 return dev;
 376
 377         return NULL;
 378 }
 379
 380 #define DISCOVER_REQ_SIZE  16
 381 #define DISCOVER_RESP_SIZE 56
 382
 383 static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 384                                       u8 *disc_resp, int single)
 385 {
 386         struct discover_resp *dr;
 387         int res;
 388
 389         disc_req[9] = single;
 390
 391         res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
 392                                disc_resp, DISCOVER_RESP_SIZE);
 393         if (res)
 394                 return res;
 395         dr = &((struct smp_resp *)disc_resp)->disc;
 396         if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) {
 397                 sas_printk("Found loopback topology, just ignore it!\n");
 398                 return 0;
 399         }
 400         sas_set_ex_phy(dev, single, disc_resp);
 401         return 0;
 402 }
 403
 404 int sas_ex_phy_discover(struct domain_device *dev, int single)
 405 {
 406         struct expander_device *ex = &dev->ex_dev;
 407         int  res = 0;
 408         u8   *disc_req;
 409         u8   *disc_resp;
 410
 411         disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
 412         if (!disc_req)
 413                 return -ENOMEM;
 414
 415         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
 416         if (!disc_resp) {
 417                 kfree(disc_req);
 418                 return -ENOMEM;
 419         }
 420
 421         disc_req[1] = SMP_DISCOVER;
 422
 423         if (0 <= single && single < ex->num_phys) {
 424                 res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single);
 425         } else {
 426                 int i;
 427
 428                 for (i = 0; i < ex->num_phys; i++) {
 429                         res = sas_ex_phy_discover_helper(dev, disc_req,
 430                                                          disc_resp, i);
 431                         if (res)
 432                                 goto out_err;
 433                 }
 434         }
 435 out_err:
 436         kfree(disc_resp);
 437         kfree(disc_req);
 438         return res;
 439 }
 440
 441 static int sas_expander_discover(struct domain_device *dev)
 442 {
 443         struct expander_device *ex = &dev->ex_dev;
 444         int res = -ENOMEM;
 445
 446         ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
 447         if (!ex->ex_phy)
 448                 return -ENOMEM;
 449
 450         res = sas_ex_phy_discover(dev, -1);
 451         if (res)
 452                 goto out_err;
 453
 454         return 0;
 455  out_err:
 456         kfree(ex->ex_phy);
 457         ex->ex_phy = NULL;
 458         return res;
 459 }
 460
 461 #define MAX_EXPANDER_PHYS 128
 462
 463 static void ex_assign_report_general(struct domain_device *dev,
 464                                             struct smp_resp *resp)
 465 {
 466         struct report_general_resp *rg = &resp->rg;
 467
 468         dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
 469         dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
 470         dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
 471         dev->ex_dev.t2t_supp = rg->t2t_supp;
 472         dev->ex_dev.conf_route_table = rg->conf_route_table;
 473         dev->ex_dev.configuring = rg->configuring;
 474         memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
 475 }
 476
 477 #define RG_REQ_SIZE   8
 478 #define RG_RESP_SIZE 32
 479
 480 static int sas_ex_general(struct domain_device *dev)
 481 {
 482         u8 *rg_req;
 483         struct smp_resp *rg_resp;
 484         int res;
 485         int i;
 486
 487         rg_req = alloc_smp_req(RG_REQ_SIZE);
 488         if (!rg_req)
 489                 return -ENOMEM;
 490
 491         rg_resp = alloc_smp_resp(RG_RESP_SIZE);
 492         if (!rg_resp) {
 493                 kfree(rg_req);
 494                 return -ENOMEM;
 495         }
 496
 497         rg_req[1] = SMP_REPORT_GENERAL;
 498
 499         for (i = 0; i < 5; i++) {
 500                 res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
 501                                        RG_RESP_SIZE);
 502
 503                 if (res) {
 504                         SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
 505                                     SAS_ADDR(dev->sas_addr), res);
 506                         goto out;
 507                 } else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
 508                         SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
 509                                     SAS_ADDR(dev->sas_addr), rg_resp->result);
 510                         res = rg_resp->result;
 511                         goto out;
 512                 }
 513
 514                 ex_assign_report_general(dev, rg_resp);
 515
 516                 if (dev->ex_dev.configuring) {
 517                         SAS_DPRINTK("RG: ex %llx self-configuring...\n",
 518                                     SAS_ADDR(dev->sas_addr));
 519                         schedule_timeout_interruptible(5*HZ);
 520                 } else
 521                         break;
 522         }
 523 out:
 524         kfree(rg_req);
 525         kfree(rg_resp);
 526         return res;
 527 }
 528
 529 static void ex_assign_manuf_info(struct domain_device *dev, void
 530                                         *_mi_resp)
 531 {
 532         u8 *mi_resp = _mi_resp;
 533         struct sas_rphy *rphy = dev->rphy;
 534         struct sas_expander_device *edev = rphy_to_expander_device(rphy);
 535
 536         memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
 537         memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
 538         memcpy(edev->product_rev, mi_resp + 36,
 539                SAS_EXPANDER_PRODUCT_REV_LEN);
 540
 541         if (mi_resp[8] & 1) {
 542                 memcpy(edev->component_vendor_id, mi_resp + 40,
 543                        SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
 544                 edev->component_id = mi_resp[48] << 8 | mi_resp[49];
 545                 edev->component_revision_id = mi_resp[50];
 546         }
 547 }
 548
 549 #define MI_REQ_SIZE   8
 550 #define MI_RESP_SIZE 64
 551
 552 static int sas_ex_manuf_info(struct domain_device *dev)
 553 {
 554         u8 *mi_req;
 555         u8 *mi_resp;
 556         int res;
 557
 558         mi_req = alloc_smp_req(MI_REQ_SIZE);
 559         if (!mi_req)
 560                 return -ENOMEM;
 561
 562         mi_resp = alloc_smp_resp(MI_RESP_SIZE);
 563         if (!mi_resp) {
 564                 kfree(mi_req);
 565                 return -ENOMEM;
 566         }
 567
 568         mi_req[1] = SMP_REPORT_MANUF_INFO;
 569
 570         res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
 571         if (res) {
 572                 SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
 573                             SAS_ADDR(dev->sas_addr), res);
 574                 goto out;
 575         } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
 576                 SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
 577                             SAS_ADDR(dev->sas_addr), mi_resp[2]);
 578                 goto out;
 579         }
 580
 581         ex_assign_manuf_info(dev, mi_resp);
 582 out:
 583         kfree(mi_req);
 584         kfree(mi_resp);
 585         return res;
 586 }
 587
 588 #define PC_REQ_SIZE  44
 589 #define PC_RESP_SIZE 8
 590
 591 int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 592                         enum phy_func phy_func,
 593                         struct sas_phy_linkrates *rates)
 594 {
 595         u8 *pc_req;
 596         u8 *pc_resp;
 597         int res;
 598
 599         pc_req = alloc_smp_req(PC_REQ_SIZE);
 600         if (!pc_req)
 601                 return -ENOMEM;
 602
 603         pc_resp = alloc_smp_resp(PC_RESP_SIZE);
 604         if (!pc_resp) {
 605                 kfree(pc_req);
 606                 return -ENOMEM;
 607         }
 608
 609         pc_req[1] = SMP_PHY_CONTROL;
 610         pc_req[9] = phy_id;
 611         pc_req[10]= phy_func;
 612         if (rates) {
 613                 pc_req[32] = rates->minimum_linkrate << 4;
 614                 pc_req[33] = rates->maximum_linkrate << 4;
 615         }
 616
 617         res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
 618
 619         kfree(pc_resp);
 620         kfree(pc_req);
 621         return res;
 622 }
 623
 624 static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
 625 {
 626         struct expander_device *ex = &dev->ex_dev;
 627         struct ex_phy *phy = &ex->ex_phy[phy_id];
 628
 629         sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
 630         phy->linkrate = SAS_PHY_DISABLED;
 631 }
 632
 633 static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
 634 {
 635         struct expander_device *ex = &dev->ex_dev;
 636         int i;
 637
 638         for (i = 0; i < ex->num_phys; i++) {
 639                 struct ex_phy *phy = &ex->ex_phy[i];
 640
 641                 if (phy->phy_state == PHY_VACANT ||
 642                     phy->phy_state == PHY_NOT_PRESENT)
 643                         continue;
 644
 645                 if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
 646                         sas_ex_disable_phy(dev, i);
 647         }
 648 }
 649
 650 static int sas_dev_present_in_domain(struct asd_sas_port *port,
 651                                             u8 *sas_addr)
 652 {
 653         struct domain_device *dev;
 654
 655         if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
 656                 return 1;
 657         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
 658                 if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
 659                         return 1;
 660         }
 661         return 0;
 662 }
 663
 664 #define RPEL_REQ_SIZE   16
 665 #define RPEL_RESP_SIZE  32
 666 int sas_smp_get_phy_events(struct sas_phy *phy)
 667 {
 668         int res;
 669         u8 *req;
 670         u8 *resp;
 671         struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
 672         struct domain_device *dev = sas_find_dev_by_rphy(rphy);
 673
 674         req = alloc_smp_req(RPEL_REQ_SIZE);
 675         if (!req)
 676                 return -ENOMEM;
 677
 678         resp = alloc_smp_resp(RPEL_RESP_SIZE);
 679         if (!resp) {
 680                 kfree(req);
 681                 return -ENOMEM;
 682         }
 683
 684         req[1] = SMP_REPORT_PHY_ERR_LOG;
 685         req[9] = phy->number;
 686
 687         res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
 688                                     resp, RPEL_RESP_SIZE);
 689
 690         if (res)
 691                 goto out;
 692
 693         phy->invalid_dword_count = scsi_to_u32(&resp[12]);
 694         phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
 695         phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
 696         phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
 697
 698  out:
 699         kfree(req);
 700         kfree(resp);
 701         return res;
 702
 703 }
 704
 705 #ifdef CONFIG_SCSI_SAS_ATA
 706
 707 #define RPS_REQ_SIZE  16
 708 #define RPS_RESP_SIZE 60
 709
 710 int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
 711                             struct smp_resp *rps_resp)
 712 {
 713         int res;
 714         u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
 715         u8 *resp = (u8 *)rps_resp;
 716
 717         if (!rps_req)
 718                 return -ENOMEM;
 719
 720         rps_req[1] = SMP_REPORT_PHY_SATA;
 721         rps_req[9] = phy_id;
 722
 723         res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
 724                                     rps_resp, RPS_RESP_SIZE);
 725
 726         /* 0x34 is the FIS type for the D2H fis.  There's a potential
 727          * standards cockup here.  sas-2 explicitly specifies the FIS
 728          * should be encoded so that FIS type is in resp[24].
 729          * However, some expanders endian reverse this.  Undo the
 730          * reversal here */
 731         if (!res && resp[27] == 0x34 && resp[24] != 0x34) {
 732                 int i;
 733
 734                 for (i = 0; i < 5; i++) {
 735                         int j = 24 + (i*4);
 736                         u8 a, b;
 737                         a = resp[j + 0];
 738                         b = resp[j + 1];
 739                         resp[j + 0] = resp[j + 3];
 740                         resp[j + 1] = resp[j + 2];
 741                         resp[j + 2] = b;
 742                         resp[j + 3] = a;
 743                 }
 744         }
 745
 746         kfree(rps_req);
 747         return res;
 748 }
 749 #endif
 750
 751 static void sas_ex_get_linkrate(struct domain_device *parent,
 752                                        struct domain_device *child,
 753                                        struct ex_phy *parent_phy)
 754 {
 755         struct expander_device *parent_ex = &parent->ex_dev;
 756         struct sas_port *port;
 757         int i;
 758
 759         child->pathways = 0;
 760
 761         port = parent_phy->port;
 762
 763         for (i = 0; i < parent_ex->num_phys; i++) {
 764                 struct ex_phy *phy = &parent_ex->ex_phy[i];
 765
 766                 if (phy->phy_state == PHY_VACANT ||
 767                     phy->phy_state == PHY_NOT_PRESENT)
 768                         continue;
 769
 770                 if (SAS_ADDR(phy->attached_sas_addr) ==
 771                     SAS_ADDR(child->sas_addr)) {
 772
 773                         child->min_linkrate = min(parent->min_linkrate,
 774                                                   phy->linkrate);
 775                         child->max_linkrate = max(parent->max_linkrate,
 776                                                   phy->linkrate);
 777                         child->pathways++;
 778                         sas_port_add_phy(port, phy->phy);
 779                 }
 780         }
 781         child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
 782         child->pathways = min(child->pathways, parent->pathways);
 783 }
 784
 785 static struct domain_device *sas_ex_discover_end_dev(
 786         struct domain_device *parent, int phy_id)
 787 {
 788         struct expander_device *parent_ex = &parent->ex_dev;
 789         struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
 790         struct domain_device *child = NULL;
 791         struct sas_rphy *rphy;
 792         int res;
 793
 794         if (phy->attached_sata_host || phy->attached_sata_ps)
 795                 return NULL;
 796
 797         child = sas_alloc_device();
 798         if (!child)
 799                 return NULL;
 800
 801         kref_get(&parent->kref);
 802         child->parent = parent;
 803         child->port   = parent->port;
 804         child->iproto = phy->attached_iproto;
 805         memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 806         sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
 807         if (!phy->port) {
 808                 phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
 809                 if (unlikely(!phy->port))
 810                         goto out_err;
 811                 if (unlikely(sas_port_add(phy->port) != 0)) {
 812                         sas_port_free(phy->port);
 813                         goto out_err;
 814                 }
 815         }
 816         sas_ex_get_linkrate(parent, child, phy);
 817         sas_device_set_phy(child, phy->port);
 818
 819 #ifdef CONFIG_SCSI_SAS_ATA
 820         if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
 821                 res = sas_get_ata_info(child, phy);
 822                 if (res)
 823                         goto out_free;
 824
 825                 sas_init_dev(child);
 826                 res = sas_ata_init(child);
 827                 if (res)
 828                         goto out_free;
 829                 rphy = sas_end_device_alloc(phy->port);
 830                 if (!rphy)
 831                         goto out_free;
 832
 833                 child->rphy = rphy;
 834                 get_device(&rphy->dev);
 835
 836                 list_add_tail(&child->disco_list_node, &parent->port->disco_list);
 837
 838                 res = sas_discover_sata(child);
 839                 if (res) {
 840                         SAS_DPRINTK("sas_discover_sata() for device %16llx at "
 841                                     "%016llx:0x%x returned 0x%x\n",
 842                                     SAS_ADDR(child->sas_addr),
 843                                     SAS_ADDR(parent->sas_addr), phy_id, res);
 844                         goto out_list_del;
 845                 }
 846         } else
 847 #endif
 848           if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
 849                 child->dev_type = SAS_END_DEVICE;
 850                 rphy = sas_end_device_alloc(phy->port);
 851                 /* FIXME: error handling */
 852                 if (unlikely(!rphy))
 853                         goto out_free;
 854                 child->tproto = phy->attached_tproto;
 855                 sas_init_dev(child);
 856
 857                 child->rphy = rphy;
 858                 get_device(&rphy->dev);
 859                 sas_fill_in_rphy(child, rphy);
 860
 861                 list_add_tail(&child->disco_list_node, &parent->port->disco_list);
 862
 863                 res = sas_discover_end_dev(child);
 864                 if (res) {
 865                         SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
 866                                     "at %016llx:0x%x returned 0x%x\n",
 867                                     SAS_ADDR(child->sas_addr),
 868                                     SAS_ADDR(parent->sas_addr), phy_id, res);
 869                         goto out_list_del;
 870                 }
 871         } else {
 872                 SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
 873                             phy->attached_tproto, SAS_ADDR(parent->sas_addr),
 874                             phy_id);
 875                 goto out_free;
 876         }
 877
 878         list_add_tail(&child->siblings, &parent_ex->children);
 879         return child;
 880
 881  out_list_del:
 882         sas_rphy_free(child->rphy);
 883         list_del(&child->disco_list_node);
 884         spin_lock_irq(&parent->port->dev_list_lock);
 885         list_del(&child->dev_list_node);
 886         spin_unlock_irq(&parent->port->dev_list_lock);
 887  out_free:
 888         sas_port_delete(phy->port);
 889  out_err:
 890         phy->port = NULL;
 891         sas_put_device(child);
 892         return NULL;
 893 }
 894
 895 /* See if this phy is part of a wide port */
 896 static bool sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
 897 {
 898         struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
 899         int i;
 900
 901         for (i = 0; i < parent->ex_dev.num_phys; i++) {
 902                 struct ex_phy *ephy = &parent->ex_dev.ex_phy[i];
 903
 904                 if (ephy == phy)
 905                         continue;
 906
 907                 if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
 908                             SAS_ADDR_SIZE) && ephy->port) {
 909                         sas_port_add_phy(ephy->port, phy->phy);
 910                         phy->port = ephy->port;
 911                         phy->phy_state = PHY_DEVICE_DISCOVERED;
 912                         return true;
 913                 }
 914         }
 915
 916         return false;
 917 }
 918
 919 static struct domain_device *sas_ex_discover_expander(
 920         struct domain_device *parent, int phy_id)
 921 {
 922         struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
 923         struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
 924         struct domain_device *child = NULL;
 925         struct sas_rphy *rphy;
 926         struct sas_expander_device *edev;
 927         struct asd_sas_port *port;
 928         int res;
 929
 930         if (phy->routing_attr == DIRECT_ROUTING) {
 931                 SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
 932                             "allowed\n",
 933                             SAS_ADDR(parent->sas_addr), phy_id,
 934                             SAS_ADDR(phy->attached_sas_addr),
 935                             phy->attached_phy_id);
 936                 return NULL;
 937         }
 938         child = sas_alloc_device();
 939         if (!child)
 940                 return NULL;
 941
 942         phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
 943         /* FIXME: better error handling */
 944         BUG_ON(sas_port_add(phy->port) != 0);
 945
 946
 947         switch (phy->attached_dev_type) {
 948         case SAS_EDGE_EXPANDER_DEVICE:
 949                 rphy = sas_expander_alloc(phy->port,
 950                                           SAS_EDGE_EXPANDER_DEVICE);
 951                 break;
 952         case SAS_FANOUT_EXPANDER_DEVICE:
 953                 rphy = sas_expander_alloc(phy->port,
 954                                           SAS_FANOUT_EXPANDER_DEVICE);
 955                 break;
 956         default:
 957                 rphy = NULL;    /* shut gcc up */
 958                 BUG();
 959         }
 960         port = parent->port;
 961         child->rphy = rphy;
 962         get_device(&rphy->dev);
 963         edev = rphy_to_expander_device(rphy);
 964         child->dev_type = phy->attached_dev_type;
 965         kref_get(&parent->kref);
 966         child->parent = parent;
 967         child->port = port;
 968         child->iproto = phy->attached_iproto;
 969         child->tproto = phy->attached_tproto;
 970         memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 971         sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
 972         sas_ex_get_linkrate(parent, child, phy);
 973         edev->level = parent_ex->level + 1;
 974         parent->port->disc.max_level = max(parent->port->disc.max_level,
 975                                            edev->level);
 976         sas_init_dev(child);
 977         sas_fill_in_rphy(child, rphy);
 978         sas_rphy_add(rphy);
 979
 980         spin_lock_irq(&parent->port->dev_list_lock);
 981         list_add_tail(&child->dev_list_node, &parent->port->dev_list);
 982         spin_unlock_irq(&parent->port->dev_list_lock);
 983
 984         res = sas_discover_expander(child);
 985         if (res) {
 986                 sas_rphy_delete(rphy);
 987                 spin_lock_irq(&parent->port->dev_list_lock);
 988                 list_del(&child->dev_list_node);
 989                 spin_unlock_irq(&parent->port->dev_list_lock);
 990                 sas_put_device(child);
 991                 return NULL;
 992         }
 993         list_add_tail(&child->siblings, &parent->ex_dev.children);
 994         return child;
 995 }
 996
 997 static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 998 {
 999         struct expander_device *ex = &dev->ex_dev;
1000         struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
1001         struct domain_device *child = NULL;
1002         int res = 0;
1003
1004         /* Phy state */
1005         if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
1006                 if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
1007                         res = sas_ex_phy_discover(dev, phy_id);
1008                 if (res)
1009                         return res;
1010         }
1011
1012         /* Parent and domain coherency */
1013         if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
1014                              SAS_ADDR(dev->port->sas_addr))) {
1015                 sas_add_parent_port(dev, phy_id);
1016                 return 0;
1017         }
1018         if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
1019                             SAS_ADDR(dev->parent->sas_addr))) {
1020                 sas_add_parent_port(dev, phy_id);
1021                 if (ex_phy->routing_attr == TABLE_ROUTING)
1022                         sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
1023                 return 0;
1024         }
1025
1026         if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
1027                 sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
1028
1029         if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) {
1030                 if (ex_phy->routing_attr == DIRECT_ROUTING) {
1031                         memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
1032                         sas_configure_routing(dev, ex_phy->attached_sas_addr);
1033                 }
1034                 return 0;
1035         } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
1036                 return 0;
1037
1038         if (ex_phy->attached_dev_type != SAS_END_DEVICE &&
1039             ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
1040             ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
1041             ex_phy->attached_dev_type != SAS_SATA_PENDING) {
1042                 SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
1043                             "phy 0x%x\n", ex_phy->attached_dev_type,
1044                             SAS_ADDR(dev->sas_addr),
1045                             phy_id);
1046                 return 0;
1047         }
1048
1049         res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
1050         if (res) {
1051                 SAS_DPRINTK("configure routing for dev %016llx "
1052                             "reported 0x%x. Forgotten\n",
1053                             SAS_ADDR(ex_phy->attached_sas_addr), res);
1054                 sas_disable_routing(dev, ex_phy->attached_sas_addr);
1055                 return res;
1056         }
1057
1058         if (sas_ex_join_wide_port(dev, phy_id)) {
1059                 SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
1060                             phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
1061                 return res;
1062         }
1063
1064         switch (ex_phy->attached_dev_type) {
1065         case SAS_END_DEVICE:
1066         case SAS_SATA_PENDING:
1067                 child = sas_ex_discover_end_dev(dev, phy_id);
1068                 break;
1069         case SAS_FANOUT_EXPANDER_DEVICE:
1070                 if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
1071                         SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
1072                                     "attached to ex %016llx phy 0x%x\n",
1073                                     SAS_ADDR(ex_phy->attached_sas_addr),
1074                                     ex_phy->attached_phy_id,
1075                                     SAS_ADDR(dev->sas_addr),
1076                                     phy_id);
1077                         sas_ex_disable_phy(dev, phy_id);
1078                         break;
1079                 } else
1080                         memcpy(dev->port->disc.fanout_sas_addr,
1081                                ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
1082                 /* fallthrough */
1083         case SAS_EDGE_EXPANDER_DEVICE:
1084                 child = sas_ex_discover_expander(dev, phy_id);
1085                 break;
1086         default:
1087                 break;
1088         }
1089
1090         if (child) {
1091                 int i;
1092
1093                 for (i = 0; i < ex->num_phys; i++) {
1094                         if (ex->ex_phy[i].phy_state == PHY_VACANT ||
1095                             ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
1096                                 continue;
1097                         /*
1098                          * Due to races, the phy might not get added to the
1099                          * wide port, so we add the phy to the wide port here.
1100                          */
1101                         if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
1102                             SAS_ADDR(child->sas_addr)) {
1103                                 ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
1104                                 if (sas_ex_join_wide_port(dev, i))
1105                                         SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
1106                                                     i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
1107
1108                         }
1109                 }
1110         }
1111
1112         return res;
1113 }
1114
1115 static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
1116 {
1117         struct expander_device *ex = &dev->ex_dev;
1118         int i;
1119
1120         for (i = 0; i < ex->num_phys; i++) {
1121                 struct ex_phy *phy = &ex->ex_phy[i];
1122
1123                 if (phy->phy_state == PHY_VACANT ||
1124                     phy->phy_state == PHY_NOT_PRESENT)
1125                         continue;
1126
1127                 if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
1128                      phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
1129                     phy->routing_attr == SUBTRACTIVE_ROUTING) {
1130
1131                         memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
1132
1133                         return 1;
1134                 }
1135         }
1136         return 0;
1137 }
1138
1139 static int sas_check_level_subtractive_boundary(struct domain_device *dev)
1140 {
1141         struct expander_device *ex = &dev->ex_dev;
1142         struct domain_device *child;
1143         u8 sub_addr[8] = {0, };
1144
1145         list_for_each_entry(child, &ex->children, siblings) {
1146                 if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
1147                     child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
1148                         continue;
1149                 if (sub_addr[0] == 0) {
1150                         sas_find_sub_addr(child, sub_addr);
1151                         continue;
1152                 } else {
1153                         u8 s2[8];
1154
1155                         if (sas_find_sub_addr(child, s2) &&
1156                             (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
1157
1158                                 SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
1159                                             "diverges from subtractive "
1160                                             "boundary %016llx\n",
1161                                             SAS_ADDR(dev->sas_addr),
1162                                             SAS_ADDR(child->sas_addr),
1163                                             SAS_ADDR(s2),
1164                                             SAS_ADDR(sub_addr));
1165
1166                                 sas_ex_disable_port(child, s2);
1167                         }
1168                 }
1169         }
1170         return 0;
1171 }
1172 /**
1173  * sas_ex_discover_devices -- discover devices attached to this expander
1174  * dev: pointer to the expander domain device
1175  * single: if you want to do a single phy, else set to -1;
1176  *
1177  * Configure this expander for use with its devices and register the
1178  * devices of this expander.
1179  */
1180 static int sas_ex_discover_devices(struct domain_device *dev, int single)
1181 {
1182         struct expander_device *ex = &dev->ex_dev;
1183         int i = 0, end = ex->num_phys;
1184         int res = 0;
1185
1186         if (0 <= single && single < end) {
1187                 i = single;
1188                 end = i+1;
1189         }
1190
1191         for ( ; i < end; i++) {
1192                 struct ex_phy *ex_phy = &ex->ex_phy[i];
1193
1194                 if (ex_phy->phy_state == PHY_VACANT ||
1195                     ex_phy->phy_state == PHY_NOT_PRESENT ||
1196                     ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
1197                         continue;
1198
1199                 switch (ex_phy->linkrate) {
1200                 case SAS_PHY_DISABLED:
1201                 case SAS_PHY_RESET_PROBLEM:
1202                 case SAS_SATA_PORT_SELECTOR:
1203                         continue;
1204                 default:
1205                         res = sas_ex_discover_dev(dev, i);
1206                         if (res)
1207                                 break;
1208                         continue;
1209                 }
1210         }
1211
1212         if (!res)
1213                 sas_check_level_subtractive_boundary(dev);
1214
1215         return res;
1216 }
1217
1218 static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
1219 {
1220         struct expander_device *ex = &dev->ex_dev;
1221         int i;
1222         u8  *sub_sas_addr = NULL;
1223
1224         if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE)
1225                 return 0;
1226
1227         for (i = 0; i < ex->num_phys; i++) {
1228                 struct ex_phy *phy = &ex->ex_phy[i];
1229
1230                 if (phy->phy_state == PHY_VACANT ||
1231                     phy->phy_state == PHY_NOT_PRESENT)
1232                         continue;
1233
1234                 if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
1235                      phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
1236                     phy->routing_attr == SUBTRACTIVE_ROUTING) {
1237
1238                         if (!sub_sas_addr)
1239                                 sub_sas_addr = &phy->attached_sas_addr[0];
1240                         else if (SAS_ADDR(sub_sas_addr) !=
1241                                  SAS_ADDR(phy->attached_sas_addr)) {
1242
1243                                 SAS_DPRINTK("ex %016llx phy 0x%x "
1244                                             "diverges(%016llx) on subtractive "
1245                                             "boundary(%016llx). Disabled\n",
1246                                             SAS_ADDR(dev->sas_addr), i,
1247                                             SAS_ADDR(phy->attached_sas_addr),
1248                                             SAS_ADDR(sub_sas_addr));
1249                                 sas_ex_disable_phy(dev, i);
1250                         }
1251                 }
1252         }
1253         return 0;
1254 }
1255
1256 static void sas_print_parent_topology_bug(struct domain_device *child,
1257                                                  struct ex_phy *parent_phy,
1258                                                  struct ex_phy *child_phy)
1259 {
1260         static const char *ex_type[] = {
1261                 [SAS_EDGE_EXPANDER_DEVICE] = "edge",
1262                 [SAS_FANOUT_EXPANDER_DEVICE] = "fanout",
1263         };
1264         struct domain_device *parent = child->parent;
1265
1266         sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx "
1267                    "phy 0x%x has %c:%c routing link!\n",
1268
1269                    ex_type[parent->dev_type],
1270                    SAS_ADDR(parent->sas_addr),
1271                    parent_phy->phy_id,
1272
1273                    ex_type[child->dev_type],
1274                    SAS_ADDR(child->sas_addr),
1275                    child_phy->phy_id,
1276
1277                    sas_route_char(parent, parent_phy),
1278                    sas_route_char(child, child_phy));
1279 }
1280
1281 static int sas_check_eeds(struct domain_device *child,
1282                                  struct ex_phy *parent_phy,
1283                                  struct ex_phy *child_phy)
1284 {
1285         int res = 0;
1286         struct domain_device *parent = child->parent;
1287
1288         if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
1289                 res = -ENODEV;
1290                 SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
1291                             "phy S:0x%x, while there is a fanout ex %016llx\n",
1292                             SAS_ADDR(parent->sas_addr),
1293                             parent_phy->phy_id,
1294                             SAS_ADDR(child->sas_addr),
1295                             child_phy->phy_id,
1296                             SAS_ADDR(parent->port->disc.fanout_sas_addr));
1297         } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
1298                 memcpy(parent->port->disc.eeds_a, parent->sas_addr,
1299                        SAS_ADDR_SIZE);
1300                 memcpy(parent->port->disc.eeds_b, child->sas_addr,
1301                        SAS_ADDR_SIZE);
1302         } else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
1303                     SAS_ADDR(parent->sas_addr)) ||
1304                    (SAS_ADDR(parent->port->disc.eeds_a) ==
1305                     SAS_ADDR(child->sas_addr)))
1306                    &&
1307                    ((SAS_ADDR(parent->port->disc.eeds_b) ==
1308                      SAS_ADDR(parent->sas_addr)) ||
1309                     (SAS_ADDR(parent->port->disc.eeds_b) ==
1310                      SAS_ADDR(child->sas_addr))))
1311                 ;
1312         else {
1313                 res = -ENODEV;
1314                 SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
1315                             "phy 0x%x link forms a third EEDS!\n",
1316                             SAS_ADDR(parent->sas_addr),
1317                             parent_phy->phy_id,
1318                             SAS_ADDR(child->sas_addr),
1319                             child_phy->phy_id);
1320         }
1321
1322         return res;
1323 }
1324
1325 /* Here we spill over 80 columns.  It is intentional.
1326  */
1327 static int sas_check_parent_topology(struct domain_device *child)
1328 {
1329         struct expander_device *child_ex = &child->ex_dev;
1330         struct expander_device *parent_ex;
1331         int i;
1332         int res = 0;
1333
1334         if (!child->parent)
1335                 return 0;
1336
1337         if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
1338             child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
1339                 return 0;
1340
1341         parent_ex = &child->parent->ex_dev;
1342
1343         for (i = 0; i < parent_ex->num_phys; i++) {
1344                 struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
1345                 struct ex_phy *child_phy;
1346
1347                 if (parent_phy->phy_state == PHY_VACANT ||
1348                     parent_phy->phy_state == PHY_NOT_PRESENT)
1349                         continue;
1350
1351                 if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
1352                         continue;
1353
1354                 child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
1355
1356                 switch (child->parent->dev_type) {
1357                 case SAS_EDGE_EXPANDER_DEVICE:
1358                         if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
1359                                 if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
1360                                     child_phy->routing_attr != TABLE_ROUTING) {
1361                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1362                                         res = -ENODEV;
1363                                 }
1364                         } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
1365                                 if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
1366                                         res = sas_check_eeds(child, parent_phy, child_phy);
1367                                 } else if (child_phy->routing_attr != TABLE_ROUTING) {
1368                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1369                                         res = -ENODEV;
1370                                 }
1371                         } else if (parent_phy->routing_attr == TABLE_ROUTING) {
1372                                 if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
1373                                     (child_phy->routing_attr == TABLE_ROUTING &&
1374                                      child_ex->t2t_supp && parent_ex->t2t_supp)) {
1375                                         /* All good */;
1376                                 } else {
1377                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1378                                         res = -ENODEV;
1379                                 }
1380                         }
1381                         break;
1382                 case SAS_FANOUT_EXPANDER_DEVICE:
1383                         if (parent_phy->routing_attr != TABLE_ROUTING ||
1384                             child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
1385                                 sas_print_parent_topology_bug(child, parent_phy, child_phy);
1386                                 res = -ENODEV;
1387                         }
1388                         break;
1389                 default:
1390                         break;
1391                 }
1392         }
1393
1394         return res;
1395 }
1396
1397 #define RRI_REQ_SIZE  16
1398 #define RRI_RESP_SIZE 44
1399
1400 static int sas_configure_present(struct domain_device *dev, int phy_id,
1401                                  u8 *sas_addr, int *index, int *present)
1402 {
1403         int i, res = 0;
1404         struct expander_device *ex = &dev->ex_dev;
1405         struct ex_phy *phy = &ex->ex_phy[phy_id];
1406         u8 *rri_req;
1407         u8 *rri_resp;
1408
1409         *present = 0;
1410         *index = 0;
1411
1412         rri_req = alloc_smp_req(RRI_REQ_SIZE);
1413         if (!rri_req)
1414                 return -ENOMEM;
1415
1416         rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
1417         if (!rri_resp) {
1418                 kfree(rri_req);
1419                 return -ENOMEM;
1420         }
1421
1422         rri_req[1] = SMP_REPORT_ROUTE_INFO;
1423         rri_req[9] = phy_id;
1424
1425         for (i = 0; i < ex->max_route_indexes ; i++) {
1426                 *(__be16 *)(rri_req+6) = cpu_to_be16(i);
1427                 res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
1428                                        RRI_RESP_SIZE);
1429                 if (res)
1430                         goto out;
1431                 res = rri_resp[2];
1432                 if (res == SMP_RESP_NO_INDEX) {
1433                         SAS_DPRINTK("overflow of indexes: dev %016llx "
1434                                     "phy 0x%x index 0x%x\n",
1435                                     SAS_ADDR(dev->sas_addr), phy_id, i);
1436                         goto out;
1437                 } else if (res != SMP_RESP_FUNC_ACC) {
1438                         SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
1439                                     "result 0x%x\n", __func__,
1440                                     SAS_ADDR(dev->sas_addr), phy_id, i, res);
1441                         goto out;
1442                 }
1443                 if (SAS_ADDR(sas_addr) != 0) {
1444                         if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
1445                                 *index = i;
1446                                 if ((rri_resp[12] & 0x80) == 0x80)
1447                                         *present = 0;
1448                                 else
1449                                         *present = 1;
1450                                 goto out;
1451                         } else if (SAS_ADDR(rri_resp+16) == 0) {
1452                                 *index = i;
1453                                 *present = 0;
1454                                 goto out;
1455                         }
1456                 } else if (SAS_ADDR(rri_resp+16) == 0 &&
1457                            phy->last_da_index < i) {
1458                         phy->last_da_index = i;
1459                         *index = i;
1460                         *present = 0;
1461                         goto out;
1462                 }
1463         }
1464         res = -1;
1465 out:
1466         kfree(rri_req);
1467         kfree(rri_resp);
1468         return res;
1469 }
1470
1471 #define CRI_REQ_SIZE  44
1472 #define CRI_RESP_SIZE  8
1473
1474 static int sas_configure_set(struct domain_device *dev, int phy_id,
1475                              u8 *sas_addr, int index, int include)
1476 {
1477         int res;
1478         u8 *cri_req;
1479         u8 *cri_resp;
1480
1481         cri_req = alloc_smp_req(CRI_REQ_SIZE);
1482         if (!cri_req)
1483                 return -ENOMEM;
1484
1485         cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
1486         if (!cri_resp) {
1487                 kfree(cri_req);
1488                 return -ENOMEM;
1489         }
1490
1491         cri_req[1] = SMP_CONF_ROUTE_INFO;
1492         *(__be16 *)(cri_req+6) = cpu_to_be16(index);
1493         cri_req[9] = phy_id;
1494         if (SAS_ADDR(sas_addr) == 0 || !include)
1495                 cri_req[12] |= 0x80;
1496         memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
1497
1498         res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
1499                                CRI_RESP_SIZE);
1500         if (res)
1501                 goto out;
1502         res = cri_resp[2];
1503         if (res == SMP_RESP_NO_INDEX) {
1504                 SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
1505                             "index 0x%x\n",
1506                             SAS_ADDR(dev->sas_addr), phy_id, index);
1507         }
1508 out:
1509         kfree(cri_req);
1510         kfree(cri_resp);
1511         return res;
1512 }
1513
1514 static int sas_configure_phy(struct domain_device *dev, int phy_id,
1515                                     u8 *sas_addr, int include)
1516 {
1517         int index;
1518         int present;
1519         int res;
1520
1521         res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
1522         if (res)
1523                 return res;
1524         if (include ^ present)
1525                 return sas_configure_set(dev, phy_id, sas_addr, index,include);
1526
1527         return res;
1528 }
1529
1530 /**
1531  * sas_configure_parent -- configure routing table of parent
1532  * parent: parent expander
1533  * child: child expander
1534  * sas_addr: SAS port identifier of device directly attached to child
1535  */
1536 static int sas_configure_parent(struct domain_device *parent,
1537                                 struct domain_device *child,
1538                                 u8 *sas_addr, int include)
1539 {
1540         struct expander_device *ex_parent = &parent->ex_dev;
1541         int res = 0;
1542         int i;
1543
1544         if (parent->parent) {
1545                 res = sas_configure_parent(parent->parent, parent, sas_addr,
1546                                            include);
1547                 if (res)
1548                         return res;
1549         }
1550
1551         if (ex_parent->conf_route_table == 0) {
1552                 SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
1553                             SAS_ADDR(parent->sas_addr));
1554                 return 0;
1555         }
1556
1557         for (i = 0; i < ex_parent->num_phys; i++) {
1558                 struct ex_phy *phy = &ex_parent->ex_phy[i];
1559
1560                 if ((phy->routing_attr == TABLE_ROUTING) &&
1561                     (SAS_ADDR(phy->attached_sas_addr) ==
1562                      SAS_ADDR(child->sas_addr))) {
1563                         res = sas_configure_phy(parent, i, sas_addr, include);
1564                         if (res)
1565                                 return res;
1566                 }
1567         }
1568
1569         return res;
1570 }
1571
1572 /**
1573  * sas_configure_routing -- configure routing
1574  * dev: expander device
1575  * sas_addr: port identifier of device directly attached to the expander device
1576  */
1577 static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
1578 {
1579         if (dev->parent)
1580                 return sas_configure_parent(dev->parent, dev, sas_addr, 1);
1581         return 0;
1582 }
1583
1584 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr)
1585 {
1586         if (dev->parent)
1587                 return sas_configure_parent(dev->parent, dev, sas_addr, 0);
1588         return 0;
1589 }
1590
1591 /**
1592  * sas_discover_expander -- expander discovery
1593  * @ex: pointer to expander domain device
1594  *
1595  * See comment in sas_discover_sata().
1596  */
1597 static int sas_discover_expander(struct domain_device *dev)
1598 {
1599         int res;
1600
1601         res = sas_notify_lldd_dev_found(dev);
1602         if (res)
1603                 return res;
1604
1605         res = sas_ex_general(dev);
1606         if (res)
1607                 goto out_err;
1608         res = sas_ex_manuf_info(dev);
1609         if (res)
1610                 goto out_err;
1611
1612         res = sas_expander_discover(dev);
1613         if (res) {
1614                 SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
1615                             SAS_ADDR(dev->sas_addr), res);
1616                 goto out_err;
1617         }
1618
1619         sas_check_ex_subtractive_boundary(dev);
1620         res = sas_check_parent_topology(dev);
1621         if (res)
1622                 goto out_err;
1623         return 0;
1624 out_err:
1625         sas_notify_lldd_dev_gone(dev);
1626         return res;
1627 }
1628
1629 static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
1630 {
1631         int res = 0;
1632         struct domain_device *dev;
1633
1634         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
1635                 if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
1636                     dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
1637                         struct sas_expander_device *ex =
1638                                 rphy_to_expander_device(dev->rphy);
1639
1640                         if (level == ex->level)
1641                                 res = sas_ex_discover_devices(dev, -1);
1642                         else if (level > 0)
1643                                 res = sas_ex_discover_devices(port->port_dev, -1);
1644
1645                 }
1646         }
1647
1648         return res;
1649 }
1650
1651 static int sas_ex_bfs_disc(struct asd_sas_port *port)
1652 {
1653         int res;
1654         int level;
1655
1656         do {
1657                 level = port->disc.max_level;
1658                 res = sas_ex_level_discovery(port, level);
1659                 mb();
1660         } while (level < port->disc.max_level);
1661
1662         return res;
1663 }
1664
1665 int sas_discover_root_expander(struct domain_device *dev)
1666 {
1667         int res;
1668         struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
1669
1670         res = sas_rphy_add(dev->rphy);
1671         if (res)
1672                 goto out_err;
1673
1674         ex->level = dev->port->disc.max_level; /* 0 */
1675         res = sas_discover_expander(dev);
1676         if (res)
1677                 goto out_err2;
1678
1679         sas_ex_bfs_disc(dev->port);
1680
1681         return res;
1682
1683 out_err2:
1684         sas_rphy_remove(dev->rphy);
1685 out_err:
1686         return res;
1687 }
1688
1689 /* ---------- Domain revalidation ---------- */
1690
1691 static int sas_get_phy_discover(struct domain_device *dev,
1692                                 int phy_id, struct smp_resp *disc_resp)
1693 {
1694         int res;
1695         u8 *disc_req;
1696
1697         disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
1698         if (!disc_req)
1699                 return -ENOMEM;
1700
1701         disc_req[1] = SMP_DISCOVER;
1702         disc_req[9] = phy_id;
1703
1704         res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
1705                                disc_resp, DISCOVER_RESP_SIZE);
1706         if (res)
1707                 goto out;
1708         else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
1709                 res = disc_resp->result;
1710                 goto out;
1711         }
1712 out:
1713         kfree(disc_req);
1714         return res;
1715 }
1716
1717 static int sas_get_phy_change_count(struct domain_device *dev,
1718                                     int phy_id, int *pcc)
1719 {
1720         int res;
1721         struct smp_resp *disc_resp;
1722
1723         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
1724         if (!disc_resp)
1725                 return -ENOMEM;
1726
1727         res = sas_get_phy_discover(dev, phy_id, disc_resp);
1728         if (!res)
1729                 *pcc = disc_resp->disc.change_count;
1730
1731         kfree(disc_resp);
1732         return res;
1733 }
1734
1735 static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
1736                                     u8 *sas_addr, enum sas_device_type *type)
1737 {
1738         int res;
1739         struct smp_resp *disc_resp;
1740         struct discover_resp *dr;
1741
1742         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
1743         if (!disc_resp)
1744                 return -ENOMEM;
1745         dr = &disc_resp->disc;
1746
1747         res = sas_get_phy_discover(dev, phy_id, disc_resp);
1748         if (res == 0) {
1749                 memcpy(sas_addr, disc_resp->disc.attached_sas_addr, 8);
1750                 *type = to_dev_type(dr);
1751                 if (*type == 0)
1752                         memset(sas_addr, 0, 8);
1753         }
1754         kfree(disc_resp);
1755         return res;
1756 }
1757
1758 static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
1759                               int from_phy, bool update)
1760 {
1761         struct expander_device *ex = &dev->ex_dev;
1762         int res = 0;
1763         int i;
1764
1765         for (i = from_phy; i < ex->num_phys; i++) {
1766                 int phy_change_count = 0;
1767
1768                 res = sas_get_phy_change_count(dev, i, &phy_change_count);
1769                 switch (res) {
1770                 case SMP_RESP_PHY_VACANT:
1771                 case SMP_RESP_NO_PHY:
1772                         continue;
1773                 case SMP_RESP_FUNC_ACC:
1774                         break;
1775                 default:
1776                         return res;
1777                 }
1778
1779                 if (phy_change_count != ex->ex_phy[i].phy_change_count) {
1780                         if (update)
1781                                 ex->ex_phy[i].phy_change_count =
1782                                         phy_change_count;
1783                         *phy_id = i;
1784                         return 0;
1785                 }
1786         }
1787         return 0;
1788 }
1789
1790 static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
1791 {
1792         int res;
1793         u8  *rg_req;
1794         struct smp_resp  *rg_resp;
1795
1796         rg_req = alloc_smp_req(RG_REQ_SIZE);
1797         if (!rg_req)
1798                 return -ENOMEM;
1799
1800         rg_resp = alloc_smp_resp(RG_RESP_SIZE);
1801         if (!rg_resp) {
1802                 kfree(rg_req);
1803                 return -ENOMEM;
1804         }
1805
1806         rg_req[1] = SMP_REPORT_GENERAL;
1807
1808         res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
1809                                RG_RESP_SIZE);
1810         if (res)
1811                 goto out;
1812         if (rg_resp->result != SMP_RESP_FUNC_ACC) {
1813                 res = rg_resp->result;
1814                 goto out;
1815         }
1816
1817         *ecc = be16_to_cpu(rg_resp->rg.change_count);
1818 out:
1819         kfree(rg_resp);
1820         kfree(rg_req);
1821         return res;
1822 }
1823 /**
1824  * sas_find_bcast_dev -  find the device issue BROADCAST(CHANGE).
1825  * @dev:domain device to be detect.
1826  * @src_dev: the device which originated BROADCAST(CHANGE).
1827  *
1828  * Add self-configuration expander support. Suppose two expander cascading,
1829  * when the first level expander is self-configuring, hotplug the disks in
1830  * second level expander, BROADCAST(CHANGE) will not only be originated
1831  * in the second level expander, but also be originated in the first level
1832  * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
1833  * expander changed count in two level expanders will all increment at least
1834  * once, but the phy which chang count has changed is the source device which
1835  * we concerned.
1836  */
1837
1838 static int sas_find_bcast_dev(struct domain_device *dev,
1839                               struct domain_device **src_dev)
1840 {
1841         struct expander_device *ex = &dev->ex_dev;
1842         int ex_change_count = -1;
1843         int phy_id = -1;
1844         int res;
1845         struct domain_device *ch;
1846
1847         res = sas_get_ex_change_count(dev, &ex_change_count);
1848         if (res)
1849                 goto out;
1850         if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
1851                 /* Just detect if this expander phys phy change count changed,
1852                 * in order to determine if this expander originate BROADCAST,
1853                 * and do not update phy change count field in our structure.
1854                 */
1855                 res = sas_find_bcast_phy(dev, &phy_id, 0, false);
1856                 if (phy_id != -1) {
1857                         *src_dev = dev;
1858                         ex->ex_change_count = ex_change_count;
1859                         SAS_DPRINTK("Expander phy change count has changed\n");
1860                         return res;
1861                 } else
1862                         SAS_DPRINTK("Expander phys DID NOT change\n");
1863         }
1864         list_for_each_entry(ch, &ex->children, siblings) {
1865                 if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
1866                         res = sas_find_bcast_dev(ch, src_dev);
1867                         if (*src_dev)
1868                                 return res;
1869                 }
1870         }
1871 out:
1872         return res;
1873 }
1874
1875 static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_device *dev)
1876 {
1877         struct expander_device *ex = &dev->ex_dev;
1878         struct domain_device *child, *n;
1879
1880         list_for_each_entry_safe(child, n, &ex->children, siblings) {
1881                 set_bit(SAS_DEV_GONE, &child->state);
1882                 if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
1883                     child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
1884                         sas_unregister_ex_tree(port, child);
1885                 else
1886                         sas_unregister_dev(port, child);
1887         }
1888         sas_unregister_dev(port, dev);
1889 }
1890
1891 static void sas_unregister_devs_sas_addr(struct domain_device *parent,
1892                                          int phy_id, bool last)
1893 {
1894         struct expander_device *ex_dev = &parent->ex_dev;
1895         struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
1896         struct domain_device *child, *n, *found = NULL;
1897         if (last) {
1898                 list_for_each_entry_safe(child, n,
1899                         &ex_dev->children, siblings) {
1900                         if (SAS_ADDR(child->sas_addr) ==
1901                             SAS_ADDR(phy->attached_sas_addr)) {
1902                                 set_bit(SAS_DEV_GONE, &child->state);
1903                                 if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
1904                                     child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
1905                                         sas_unregister_ex_tree(parent->port, child);
1906                                 else
1907                                         sas_unregister_dev(parent->port, child);
1908                                 found = child;
1909                                 break;
1910                         }
1911                 }
1912                 sas_disable_routing(parent, phy->attached_sas_addr);
1913         }
1914         memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
1915         if (phy->port) {
1916                 sas_port_delete_phy(phy->port, phy->phy);
1917                 sas_device_set_phy(found, phy->port);
1918                 if (phy->port->num_phys == 0)
1919                         list_add_tail(&phy->port->del_list,
1920                                 &parent->port->sas_port_del_list);
1921                 phy->port = NULL;
1922         }
1923 }
1924
1925 static int sas_discover_bfs_by_root_level(struct domain_device *root,
1926                                           const int level)
1927 {
1928         struct expander_device *ex_root = &root->ex_dev;
1929         struct domain_device *child;
1930         int res = 0;
1931
1932         list_for_each_entry(child, &ex_root->children, siblings) {
1933                 if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
1934                     child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
1935                         struct sas_expander_device *ex =
1936                                 rphy_to_expander_device(child->rphy);
1937
1938                         if (level > ex->level)
1939                                 res = sas_discover_bfs_by_root_level(child,
1940                                                                      level);
1941                         else if (level == ex->level)
1942                                 res = sas_ex_discover_devices(child, -1);
1943                 }
1944         }
1945         return res;
1946 }
1947
1948 static int sas_discover_bfs_by_root(struct domain_device *dev)
1949 {
1950         int res;
1951         struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
1952         int level = ex->level+1;
1953
1954         res = sas_ex_discover_devices(dev, -1);
1955         if (res)
1956                 goto out;
1957         do {
1958                 res = sas_discover_bfs_by_root_level(dev, level);
1959                 mb();
1960                 level += 1;
1961         } while (level <= dev->port->disc.max_level);
1962 out:
1963         return res;
1964 }
1965
1966 static int sas_discover_new(struct domain_device *dev, int phy_id)
1967 {
1968         struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
1969         struct domain_device *child;
1970         int res;
1971
1972         SAS_DPRINTK("ex %016llx phy%d new device attached\n",
1973                     SAS_ADDR(dev->sas_addr), phy_id);
1974         res = sas_ex_phy_discover(dev, phy_id);
1975         if (res)
1976                 return res;
1977
1978         if (sas_ex_join_wide_port(dev, phy_id))
1979                 return 0;
1980
1981         res = sas_ex_discover_devices(dev, phy_id);
1982         if (res)
1983                 return res;
1984         list_for_each_entry(child, &dev->ex_dev.children, siblings) {
1985                 if (SAS_ADDR(child->sas_addr) ==
1986                     SAS_ADDR(ex_phy->attached_sas_addr)) {
1987                         if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
1988                             child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
1989                                 res = sas_discover_bfs_by_root(child);
1990                         break;
1991                 }
1992         }
1993         return res;
1994 }
1995
1996 static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
1997 {
1998         if (old == new)
1999                 return true;
2000
2001         /* treat device directed resets as flutter, if we went
2002          * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery
2003          */
2004         if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) ||
2005             (old == SAS_END_DEVICE && new == SAS_SATA_PENDING))
2006                 return true;
2007
2008         return false;
2009 }
2010
2011 static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
2012 {
2013         struct expander_device *ex = &dev->ex_dev;
2014         struct ex_phy *phy = &ex->ex_phy[phy_id];
2015         enum sas_device_type type = SAS_PHY_UNUSED;
2016         u8 sas_addr[8];
2017         int res;
2018
2019         memset(sas_addr, 0, 8);
2020         res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type);
2021         switch (res) {
2022         case SMP_RESP_NO_PHY:
2023                 phy->phy_state = PHY_NOT_PRESENT;
2024                 sas_unregister_devs_sas_addr(dev, phy_id, last);
2025                 return res;
2026         case SMP_RESP_PHY_VACANT:
2027                 phy->phy_state = PHY_VACANT;
2028                 sas_unregister_devs_sas_addr(dev, phy_id, last);
2029                 return res;
2030         case SMP_RESP_FUNC_ACC:
2031                 break;
2032         case -ECOMM:
2033                 break;
2034         default:
2035                 return res;
2036         }
2037
2038         if ((SAS_ADDR(sas_addr) == 0) || (res == -ECOMM)) {
2039                 phy->phy_state = PHY_EMPTY;
2040                 sas_unregister_devs_sas_addr(dev, phy_id, last);
2041                 return res;
2042         } else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) &&
2043                    dev_type_flutter(type, phy->attached_dev_type)) {
2044                 struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id);
2045                 char *action = "";
2046
2047                 sas_ex_phy_discover(dev, phy_id);
2048
2049                 if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
2050                         action = ", needs recovery";
2051                 SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
2052                             SAS_ADDR(dev->sas_addr), phy_id, action);
2053                 return res;
2054         }
2055
2056         /* delete the old link */
2057         if (SAS_ADDR(phy->attached_sas_addr) &&
2058             SAS_ADDR(sas_addr) != SAS_ADDR(phy->attached_sas_addr)) {
2059                 SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
2060                             SAS_ADDR(dev->sas_addr), phy_id,
2061                             SAS_ADDR(phy->attached_sas_addr));
2062                 sas_unregister_devs_sas_addr(dev, phy_id, last);
2063         }
2064
2065         return sas_discover_new(dev, phy_id);
2066 }
2067
2068 /**
2069  * sas_rediscover - revalidate the domain.
2070  * @dev:domain device to be detect.
2071  * @phy_id: the phy id will be detected.
2072  *
2073  * NOTE: this process _must_ quit (return) as soon as any connection
2074  * errors are encountered.  Connection recovery is done elsewhere.
2075  * Discover process only interrogates devices in order to discover the
2076  * domain.For plugging out, we un-register the device only when it is
2077  * the last phy in the port, for other phys in this port, we just delete it
2078  * from the port.For inserting, we do discovery when it is the
2079  * first phy,for other phys in this port, we add it to the port to
2080  * forming the wide-port.
2081  */
2082 static int sas_rediscover(struct domain_device *dev, const int phy_id)
2083 {
2084         struct expander_device *ex = &dev->ex_dev;
2085         struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
2086         int res = 0;
2087         int i;
2088         bool last = true;       /* is this the last phy of the port */
2089
2090         SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
2091                     SAS_ADDR(dev->sas_addr), phy_id);
2092
2093         if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
2094                 for (i = 0; i < ex->num_phys; i++) {
2095                         struct ex_phy *phy = &ex->ex_phy[i];
2096
2097                         if (i == phy_id)
2098                                 continue;
2099                         if (SAS_ADDR(phy->attached_sas_addr) ==
2100                             SAS_ADDR(changed_phy->attached_sas_addr)) {
2101                                 SAS_DPRINTK("phy%d part of wide port with "
2102                                             "phy%d\n", phy_id, i);
2103                                 last = false;
2104                                 break;
2105                         }
2106                 }
2107                 res = sas_rediscover_dev(dev, phy_id, last);
2108         } else
2109                 res = sas_discover_new(dev, phy_id);
2110         return res;
2111 }
2112
2113 /**
2114  * sas_revalidate_domain -- revalidate the domain
2115  * @port: port to the domain of interest
2116  *
2117  * NOTE: this process _must_ quit (return) as soon as any connection
2118  * errors are encountered.  Connection recovery is done elsewhere.
2119  * Discover process only interrogates devices in order to discover the
2120  * domain.
2121  */
2122 int sas_ex_revalidate_domain(struct domain_device *port_dev)
2123 {
2124         int res;
2125         struct domain_device *dev = NULL;
2126
2127         res = sas_find_bcast_dev(port_dev, &dev);
2128         if (res == 0 && dev) {
2129                 struct expander_device *ex = &dev->ex_dev;
2130                 int i = 0, phy_id;
2131
2132                 do {
2133                         phy_id = -1;
2134                         res = sas_find_bcast_phy(dev, &phy_id, i, true);
2135                         if (phy_id == -1)
2136                                 break;
2137                         res = sas_rediscover(dev, phy_id);
2138                         i = phy_id + 1;
2139                 } while (i < ex->num_phys);
2140         }
2141         return res;
2142 }
2143
2144 void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
2145                 struct sas_rphy *rphy)
2146 {
2147         struct domain_device *dev;
2148         unsigned int rcvlen = 0;
2149         int ret = -EINVAL;
2150
2151         /* no rphy means no smp target support (ie aic94xx host) */
2152         if (!rphy)
2153                 return sas_smp_host_handler(job, shost);
2154
2155         switch (rphy->identify.device_type) {
2156         case SAS_EDGE_EXPANDER_DEVICE:
2157         case SAS_FANOUT_EXPANDER_DEVICE:
2158                 break;
2159         default:
2160                 printk("%s: can we send a smp request to a device?\n",
2161                        __func__);
2162                 goto out;
2163         }
2164
2165         dev = sas_find_dev_by_rphy(rphy);
2166         if (!dev) {
2167                 printk("%s: fail to find a domain_device?\n", __func__);
2168                 goto out;
2169         }
2170
2171         /* do we need to support multiple segments? */
2172         if (job->request_payload.sg_cnt > 1 ||
2173             job->reply_payload.sg_cnt > 1) {
2174                 printk("%s: multiple segments req %u, rsp %u\n",
2175                        __func__, job->request_payload.payload_len,
2176                        job->reply_payload.payload_len);
2177                 goto out;
2178         }
2179
2180         ret = smp_execute_task_sg(dev, job->request_payload.sg_list,
2181                         job->reply_payload.sg_list);
2182         if (ret >= 0) {
2183                 /* bsg_job_done() requires the length received  */
2184                 rcvlen = job->reply_payload.payload_len - ret;
2185                 ret = 0;
2186         }
2187
2188 out:
2189         bsg_job_done(job, ret, rcvlen);
2190 }