Linux 6.9-rc6
[sfrench/cifs-2.6.git] / drivers / platform / chrome / cros_ec_ishtp.c
1 // SPDX-License-Identifier: GPL-2.0
2 // ISHTP interface for ChromeOS Embedded Controller
3 //
4 // Copyright (c) 2019, Intel Corporation.
5 //
6 // ISHTP client driver for talking to the Chrome OS EC firmware running
7 // on Intel Integrated Sensor Hub (ISH) using the ISH Transport protocol
8 // (ISH-TP).
9
10 #include <linux/delay.h>
11 #include <linux/module.h>
12 #include <linux/pci.h>
13 #include <linux/platform_data/cros_ec_commands.h>
14 #include <linux/platform_data/cros_ec_proto.h>
15 #include <linux/intel-ish-client-if.h>
16
17 #include "cros_ec.h"
18
19 /*
20  * ISH TX/RX ring buffer pool size
21  *
22  * The AP->ISH messages and corresponding ISH->AP responses are
23  * serialized. We need 1 TX and 1 RX buffer for these.
24  *
25  * The MKBP ISH->AP events are serialized. We need one additional RX
26  * buffer for them.
27  */
28 #define CROS_ISH_CL_TX_RING_SIZE                8
29 #define CROS_ISH_CL_RX_RING_SIZE                8
30
31 /* ISH CrOS EC Host Commands */
32 enum cros_ec_ish_channel {
33         CROS_EC_COMMAND = 1,                    /* AP->ISH message */
34         CROS_MKBP_EVENT = 2,                    /* ISH->AP events */
35 };
36
37 /*
38  * ISH firmware timeout for 1 message send failure is 1Hz, and the
39  * firmware will retry 2 times, so 3Hz is used for timeout.
40  */
41 #define ISHTP_SEND_TIMEOUT                      (3 * HZ)
42
43 /* ISH Transport CrOS EC ISH client unique GUID */
44 static const struct ishtp_device_id cros_ec_ishtp_id_table[] = {
45         { .guid = GUID_INIT(0x7b7154d0, 0x56f4, 0x4bdc,
46                   0xb0, 0xd8, 0x9e, 0x7c, 0xda, 0xe0, 0xd6, 0xa0), },
47         { }
48 };
49 MODULE_DEVICE_TABLE(ishtp, cros_ec_ishtp_id_table);
50
51 struct header {
52         u8 channel;
53         u8 status;
54         u8 token;
55         u8 reserved;
56 } __packed;
57
58 struct cros_ish_out_msg {
59         struct header hdr;
60         struct ec_host_request ec_request;
61 } __packed;
62
63 struct cros_ish_in_msg {
64         struct header hdr;
65         struct ec_host_response ec_response;
66 } __packed;
67
68 #define IN_MSG_EC_RESPONSE_PREAMBLE                                     \
69         offsetof(struct cros_ish_in_msg, ec_response)
70
71 #define OUT_MSG_EC_REQUEST_PREAMBLE                                     \
72         offsetof(struct cros_ish_out_msg, ec_request)
73
74 #define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device)
75
76 /*
77  * The Read-Write Semaphore is used to prevent message TX or RX while
78  * the ishtp client is being initialized or undergoing reset.
79  *
80  * The readers are the kernel function calls responsible for IA->ISH
81  * and ISH->AP messaging.
82  *
83  * The writers are .reset() and .probe() function.
84  */
85 static DECLARE_RWSEM(init_lock);
86
87 /**
88  * struct response_info - Encapsulate firmware response related
89  * information for passing between function ish_send() and
90  * process_recv() callback.
91  *
92  * @data: Copy the data received from firmware here.
93  * @max_size: Max size allocated for the @data buffer. If the received
94  * data exceeds this value, we log an error.
95  * @size: Actual size of data received from firmware.
96  * @error: 0 for success, negative error code for a failure in process_recv().
97  * @token: Expected token for response that we are waiting on.
98  * @received: Set to true on receiving a valid firmware response to host command
99  * @wait_queue: Wait queue for host to wait for firmware response.
100  */
101 struct response_info {
102         void *data;
103         size_t max_size;
104         size_t size;
105         int error;
106         u8 token;
107         bool received;
108         wait_queue_head_t wait_queue;
109 };
110
111 /**
112  * struct ishtp_cl_data - Encapsulate per ISH TP Client.
113  *
114  * @cros_ish_cl: ISHTP firmware client instance.
115  * @cl_device: ISHTP client device instance.
116  * @response: Response info passing between ish_send() and process_recv().
117  * @work_ishtp_reset: Work queue reset handling.
118  * @work_ec_evt: Work queue for EC events.
119  * @ec_dev: CrOS EC MFD device.
120  *
121  * This structure is used to store per client data.
122  */
123 struct ishtp_cl_data {
124         struct ishtp_cl *cros_ish_cl;
125         struct ishtp_cl_device *cl_device;
126
127         /*
128          * Used for passing firmware response information between
129          * ish_send() and process_recv() callback.
130          */
131         struct response_info response;
132
133         struct work_struct work_ishtp_reset;
134         struct work_struct work_ec_evt;
135         struct cros_ec_device *ec_dev;
136 };
137
138 /**
139  * ish_evt_handler - ISH to AP event handler
140  * @work: Work struct
141  */
142 static void ish_evt_handler(struct work_struct *work)
143 {
144         struct ishtp_cl_data *client_data =
145                 container_of(work, struct ishtp_cl_data, work_ec_evt);
146
147         cros_ec_irq_thread(0, client_data->ec_dev);
148 }
149
150 /**
151  * ish_send() - Send message from host to firmware
152  *
153  * @client_data: Client data instance
154  * @out_msg: Message buffer to be sent to firmware
155  * @out_size: Size of out going message
156  * @in_msg: Message buffer where the incoming data is copied. This buffer
157  * is allocated by calling
158  * @in_size: Max size of incoming message
159  *
160  * Return: Number of bytes copied in the in_msg on success, negative
161  * error code on failure.
162  */
163 static int ish_send(struct ishtp_cl_data *client_data,
164                     u8 *out_msg, size_t out_size,
165                     u8 *in_msg, size_t in_size)
166 {
167         static u8 next_token;
168         int rv;
169         struct header *out_hdr = (struct header *)out_msg;
170         struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl;
171
172         dev_dbg(cl_data_to_dev(client_data),
173                 "%s: channel=%02u status=%02u\n",
174                 __func__, out_hdr->channel, out_hdr->status);
175
176         /* Setup for incoming response */
177         client_data->response.data = in_msg;
178         client_data->response.max_size = in_size;
179         client_data->response.error = 0;
180         client_data->response.token = next_token++;
181         client_data->response.received = false;
182
183         out_hdr->token = client_data->response.token;
184
185         rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size);
186         if (rv) {
187                 dev_err(cl_data_to_dev(client_data),
188                         "ishtp_cl_send error %d\n", rv);
189                 return rv;
190         }
191
192         wait_event_interruptible_timeout(client_data->response.wait_queue,
193                                          client_data->response.received,
194                                          ISHTP_SEND_TIMEOUT);
195         if (!client_data->response.received) {
196                 dev_err(cl_data_to_dev(client_data),
197                         "Timed out for response to host message\n");
198                 return -ETIMEDOUT;
199         }
200
201         if (client_data->response.error < 0)
202                 return client_data->response.error;
203
204         return client_data->response.size;
205 }
206
207 /**
208  * process_recv() - Received and parse incoming packet
209  * @cros_ish_cl: Client instance to get stats
210  * @rb_in_proc: Host interface message buffer
211  * @timestamp: Timestamp of when parent callback started
212  *
213  * Parse the incoming packet. If it is a response packet then it will
214  * update per instance flags and wake up the caller waiting to for the
215  * response. If it is an event packet then it will schedule event work.
216  */
217 static void process_recv(struct ishtp_cl *cros_ish_cl,
218                          struct ishtp_cl_rb *rb_in_proc, ktime_t timestamp)
219 {
220         size_t data_len = rb_in_proc->buf_idx;
221         struct ishtp_cl_data *client_data =
222                 ishtp_get_client_data(cros_ish_cl);
223         struct device *dev = cl_data_to_dev(client_data);
224         struct cros_ish_in_msg *in_msg =
225                 (struct cros_ish_in_msg *)rb_in_proc->buffer.data;
226
227         /* Proceed only if reset or init is not in progress */
228         if (!down_read_trylock(&init_lock)) {
229                 /* Free the buffer */
230                 ishtp_cl_io_rb_recycle(rb_in_proc);
231                 dev_warn(dev,
232                          "Host is not ready to receive incoming messages\n");
233                 return;
234         }
235
236         /*
237          * All firmware messages contain a header. Check the buffer size
238          * before accessing elements inside.
239          */
240         if (!rb_in_proc->buffer.data) {
241                 dev_warn(dev, "rb_in_proc->buffer.data returned null");
242                 client_data->response.error = -EBADMSG;
243                 goto end_error;
244         }
245
246         if (data_len < sizeof(struct header)) {
247                 dev_err(dev, "data size %zu is less than header %zu\n",
248                         data_len, sizeof(struct header));
249                 client_data->response.error = -EMSGSIZE;
250                 goto end_error;
251         }
252
253         dev_dbg(dev, "channel=%02u status=%02u\n",
254                 in_msg->hdr.channel, in_msg->hdr.status);
255
256         switch (in_msg->hdr.channel) {
257         case CROS_EC_COMMAND:
258                 if (client_data->response.received) {
259                         dev_err(dev,
260                                 "Previous firmware message not yet processed\n");
261                         goto end_error;
262                 }
263
264                 if (client_data->response.token != in_msg->hdr.token) {
265                         dev_err_ratelimited(dev,
266                                             "Dropping old response token %d\n",
267                                             in_msg->hdr.token);
268                         goto end_error;
269                 }
270
271                 /* Sanity check */
272                 if (!client_data->response.data) {
273                         dev_err(dev,
274                                 "Receiving buffer is null. Should be allocated by calling function\n");
275                         client_data->response.error = -EINVAL;
276                         goto error_wake_up;
277                 }
278
279                 if (data_len > client_data->response.max_size) {
280                         dev_err(dev,
281                                 "Received buffer size %zu is larger than allocated buffer %zu\n",
282                                 data_len, client_data->response.max_size);
283                         client_data->response.error = -EMSGSIZE;
284                         goto error_wake_up;
285                 }
286
287                 if (in_msg->hdr.status) {
288                         dev_err(dev, "firmware returned status %d\n",
289                                 in_msg->hdr.status);
290                         client_data->response.error = -EIO;
291                         goto error_wake_up;
292                 }
293
294                 /* Update the actual received buffer size */
295                 client_data->response.size = data_len;
296
297                 /*
298                  * Copy the buffer received in firmware response for the
299                  * calling thread.
300                  */
301                 memcpy(client_data->response.data,
302                        rb_in_proc->buffer.data, data_len);
303
304 error_wake_up:
305                 /* Free the buffer since we copied data or didn't need it */
306                 ishtp_cl_io_rb_recycle(rb_in_proc);
307                 rb_in_proc = NULL;
308
309                 /* Set flag before waking up the caller */
310                 client_data->response.received = true;
311
312                 /* Wake the calling thread */
313                 wake_up_interruptible(&client_data->response.wait_queue);
314
315                 break;
316
317         case CROS_MKBP_EVENT:
318                 /* Free the buffer. This is just an event without data */
319                 ishtp_cl_io_rb_recycle(rb_in_proc);
320                 rb_in_proc = NULL;
321                 /*
322                  * Set timestamp from beginning of function since we actually
323                  * got an incoming MKBP event
324                  */
325                 client_data->ec_dev->last_event_time = timestamp;
326                 schedule_work(&client_data->work_ec_evt);
327
328                 break;
329
330         default:
331                 dev_err(dev, "Invalid channel=%02d\n", in_msg->hdr.channel);
332         }
333
334 end_error:
335         /* Free the buffer if we already haven't */
336         if (rb_in_proc)
337                 ishtp_cl_io_rb_recycle(rb_in_proc);
338
339         up_read(&init_lock);
340 }
341
342 /**
343  * ish_event_cb() - bus driver callback for incoming message
344  * @cl_device: ISHTP client device for which this message is targeted.
345  *
346  * Remove the packet from the list and process the message by calling
347  * process_recv.
348  */
349 static void ish_event_cb(struct ishtp_cl_device *cl_device)
350 {
351         struct ishtp_cl_rb *rb_in_proc;
352         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
353         ktime_t timestamp;
354
355         /*
356          * Take timestamp as close to hardware interrupt as possible for sensor
357          * timestamps.
358          */
359         timestamp = cros_ec_get_time_ns();
360
361         while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL) {
362                 /* Decide what to do with received data */
363                 process_recv(cros_ish_cl, rb_in_proc, timestamp);
364         }
365 }
366
367 /**
368  * cros_ish_init() - Init function for ISHTP client
369  * @cros_ish_cl: ISHTP client instance
370  * @reset: true if called from reset handler
371  *
372  * This function complete the initializtion of the client.
373  *
374  * Return: 0 for success, negative error code for failure.
375  */
376 static int cros_ish_init(struct ishtp_cl *cros_ish_cl, bool reset)
377 {
378         int rv;
379         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
380
381         rv = ishtp_cl_establish_connection(cros_ish_cl,
382                                            &cros_ec_ishtp_id_table[0].guid,
383                                            CROS_ISH_CL_TX_RING_SIZE,
384                                            CROS_ISH_CL_RX_RING_SIZE,
385                                            reset);
386         if (rv) {
387                 dev_err(cl_data_to_dev(client_data),
388                         "client connect fail\n");
389                 goto err_cl_disconnect;
390         }
391
392         ishtp_register_event_cb(client_data->cl_device, ish_event_cb);
393         return 0;
394
395 err_cl_disconnect:
396         ishtp_cl_destroy_connection(cros_ish_cl, reset);
397         return rv;
398 }
399
400 /**
401  * cros_ish_deinit() - Deinit function for ISHTP client
402  * @cros_ish_cl: ISHTP client instance
403  *
404  * Unlink and free cros_ec client
405  */
406 static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl)
407 {
408         ishtp_cl_destroy_connection(cros_ish_cl, false);
409
410         /* Disband and free all Tx and Rx client-level rings */
411         ishtp_cl_free(cros_ish_cl);
412 }
413
414 /**
415  * prepare_cros_ec_rx() - Check & prepare receive buffer
416  * @ec_dev: CrOS EC MFD device.
417  * @in_msg: Incoming message buffer
418  * @msg: cros_ec command used to send & receive data
419  *
420  * Return: 0 for success, negative error code for failure.
421  *
422  * Check the received buffer. Convert to cros_ec_command format.
423  */
424 static int prepare_cros_ec_rx(struct cros_ec_device *ec_dev,
425                               const struct cros_ish_in_msg *in_msg,
426                               struct cros_ec_command *msg)
427 {
428         u8 sum = 0;
429         int i, rv, offset;
430
431         /* Check response error code */
432         msg->result = in_msg->ec_response.result;
433         rv = cros_ec_check_result(ec_dev, msg);
434         if (rv < 0)
435                 return rv;
436
437         if (in_msg->ec_response.data_len > msg->insize) {
438                 dev_err(ec_dev->dev, "Packet too long (%d bytes, expected %d)",
439                         in_msg->ec_response.data_len, msg->insize);
440                 return -ENOSPC;
441         }
442
443         /* Copy response packet payload and compute checksum */
444         for (i = 0; i < sizeof(struct ec_host_response); i++)
445                 sum += ((u8 *)in_msg)[IN_MSG_EC_RESPONSE_PREAMBLE + i];
446
447         offset = sizeof(struct cros_ish_in_msg);
448         for (i = 0; i < in_msg->ec_response.data_len; i++)
449                 sum += msg->data[i] = ((u8 *)in_msg)[offset + i];
450
451         if (sum) {
452                 dev_dbg(ec_dev->dev, "Bad received packet checksum %d\n", sum);
453                 return -EBADMSG;
454         }
455
456         return 0;
457 }
458
459 static int cros_ec_pkt_xfer_ish(struct cros_ec_device *ec_dev,
460                                 struct cros_ec_command *msg)
461 {
462         int rv;
463         struct ishtp_cl *cros_ish_cl = ec_dev->priv;
464         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
465         struct device *dev = cl_data_to_dev(client_data);
466         struct cros_ish_in_msg *in_msg = (struct cros_ish_in_msg *)ec_dev->din;
467         struct cros_ish_out_msg *out_msg =
468                 (struct cros_ish_out_msg *)ec_dev->dout;
469         size_t in_size = sizeof(struct cros_ish_in_msg) + msg->insize;
470         size_t out_size = sizeof(struct cros_ish_out_msg) + msg->outsize;
471
472         /* Sanity checks */
473         if (in_size > ec_dev->din_size) {
474                 dev_err(dev,
475                         "Incoming payload size %zu is too large for ec_dev->din_size %d\n",
476                         in_size, ec_dev->din_size);
477                 return -EMSGSIZE;
478         }
479
480         if (out_size > ec_dev->dout_size) {
481                 dev_err(dev,
482                         "Outgoing payload size %zu is too large for ec_dev->dout_size %d\n",
483                         out_size, ec_dev->dout_size);
484                 return -EMSGSIZE;
485         }
486
487         /* Proceed only if reset-init is not in progress */
488         if (!down_read_trylock(&init_lock)) {
489                 dev_warn(dev,
490                          "Host is not ready to send messages to ISH. Try again\n");
491                 return -EAGAIN;
492         }
493
494         /* Prepare the package to be sent over ISH TP */
495         out_msg->hdr.channel = CROS_EC_COMMAND;
496         out_msg->hdr.status = 0;
497
498         ec_dev->dout += OUT_MSG_EC_REQUEST_PREAMBLE;
499         rv = cros_ec_prepare_tx(ec_dev, msg);
500         if (rv < 0)
501                 goto end_error;
502         ec_dev->dout -= OUT_MSG_EC_REQUEST_PREAMBLE;
503
504         dev_dbg(dev,
505                 "out_msg: struct_ver=0x%x checksum=0x%x command=0x%x command_ver=0x%x data_len=0x%x\n",
506                 out_msg->ec_request.struct_version,
507                 out_msg->ec_request.checksum,
508                 out_msg->ec_request.command,
509                 out_msg->ec_request.command_version,
510                 out_msg->ec_request.data_len);
511
512         /* Send command to ISH EC firmware and read response */
513         rv = ish_send(client_data,
514                       (u8 *)out_msg, out_size,
515                       (u8 *)in_msg, in_size);
516         if (rv < 0)
517                 goto end_error;
518
519         rv = prepare_cros_ec_rx(ec_dev, in_msg, msg);
520         if (rv)
521                 goto end_error;
522
523         rv = in_msg->ec_response.data_len;
524
525         dev_dbg(dev,
526                 "in_msg: struct_ver=0x%x checksum=0x%x result=0x%x data_len=0x%x\n",
527                 in_msg->ec_response.struct_version,
528                 in_msg->ec_response.checksum,
529                 in_msg->ec_response.result,
530                 in_msg->ec_response.data_len);
531
532 end_error:
533         if (msg->command == EC_CMD_REBOOT_EC)
534                 msleep(EC_REBOOT_DELAY_MS);
535
536         up_read(&init_lock);
537
538         return rv;
539 }
540
541 static int cros_ec_dev_init(struct ishtp_cl_data *client_data)
542 {
543         struct cros_ec_device *ec_dev;
544         struct device *dev = cl_data_to_dev(client_data);
545
546         ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
547         if (!ec_dev)
548                 return -ENOMEM;
549
550         client_data->ec_dev = ec_dev;
551         dev->driver_data = ec_dev;
552
553         ec_dev->dev = dev;
554         ec_dev->priv = client_data->cros_ish_cl;
555         ec_dev->cmd_xfer = NULL;
556         ec_dev->pkt_xfer = cros_ec_pkt_xfer_ish;
557         ec_dev->phys_name = dev_name(dev);
558         ec_dev->din_size = sizeof(struct cros_ish_in_msg) +
559                            sizeof(struct ec_response_get_protocol_info);
560         ec_dev->dout_size = sizeof(struct cros_ish_out_msg);
561
562         return cros_ec_register(ec_dev);
563 }
564
565 static void reset_handler(struct work_struct *work)
566 {
567         int rv;
568         struct device *dev;
569         struct ishtp_cl *cros_ish_cl;
570         struct ishtp_cl_data *client_data =
571                 container_of(work, struct ishtp_cl_data, work_ishtp_reset);
572
573         /* Lock for reset to complete */
574         down_write(&init_lock);
575
576         cros_ish_cl = client_data->cros_ish_cl;
577
578         ishtp_cl_destroy_connection(cros_ish_cl, true);
579
580         rv = cros_ish_init(cros_ish_cl, true);
581         if (rv) {
582                 dev_err(cl_data_to_dev(client_data), "Reset Failed\n");
583                 up_write(&init_lock);
584                 return;
585         }
586
587         /* Refresh ec_dev device pointers */
588         client_data->ec_dev->priv = client_data->cros_ish_cl;
589         dev = cl_data_to_dev(client_data);
590         dev->driver_data = client_data->ec_dev;
591
592         dev_info(cl_data_to_dev(client_data), "Chrome EC ISH reset done\n");
593
594         up_write(&init_lock);
595 }
596
597 /**
598  * cros_ec_ishtp_probe() - ISHTP client driver probe callback
599  * @cl_device: ISHTP client device instance
600  *
601  * Return: 0 for success, negative error code for failure.
602  */
603 static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
604 {
605         int rv;
606         struct ishtp_cl *cros_ish_cl;
607         struct ishtp_cl_data *client_data =
608                 devm_kzalloc(ishtp_device(cl_device),
609                              sizeof(*client_data), GFP_KERNEL);
610         if (!client_data)
611                 return -ENOMEM;
612
613         /* Lock for initialization to complete */
614         down_write(&init_lock);
615
616         cros_ish_cl = ishtp_cl_allocate(cl_device);
617         if (!cros_ish_cl) {
618                 rv = -ENOMEM;
619                 goto end_ishtp_cl_alloc_error;
620         }
621
622         ishtp_set_drvdata(cl_device, cros_ish_cl);
623         ishtp_set_client_data(cros_ish_cl, client_data);
624         client_data->cros_ish_cl = cros_ish_cl;
625         client_data->cl_device = cl_device;
626
627         init_waitqueue_head(&client_data->response.wait_queue);
628
629         INIT_WORK(&client_data->work_ishtp_reset,
630                   reset_handler);
631         INIT_WORK(&client_data->work_ec_evt,
632                   ish_evt_handler);
633
634         rv = cros_ish_init(cros_ish_cl, false);
635         if (rv)
636                 goto end_ishtp_cl_init_error;
637
638         ishtp_get_device(cl_device);
639
640         up_write(&init_lock);
641
642         /* Register croc_ec_dev mfd */
643         rv = cros_ec_dev_init(client_data);
644         if (rv) {
645                 down_write(&init_lock);
646                 goto end_cros_ec_dev_init_error;
647         }
648
649         return 0;
650
651 end_cros_ec_dev_init_error:
652         ishtp_cl_destroy_connection(cros_ish_cl, false);
653         ishtp_put_device(cl_device);
654 end_ishtp_cl_init_error:
655         ishtp_cl_free(cros_ish_cl);
656 end_ishtp_cl_alloc_error:
657         up_write(&init_lock);
658         return rv;
659 }
660
661 /**
662  * cros_ec_ishtp_remove() - ISHTP client driver remove callback
663  * @cl_device: ISHTP client device instance
664  *
665  * Return: 0
666  */
667 static void cros_ec_ishtp_remove(struct ishtp_cl_device *cl_device)
668 {
669         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
670         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
671
672         cancel_work_sync(&client_data->work_ishtp_reset);
673         cancel_work_sync(&client_data->work_ec_evt);
674         cros_ish_deinit(cros_ish_cl);
675         ishtp_put_device(cl_device);
676 }
677
678 /**
679  * cros_ec_ishtp_reset() - ISHTP client driver reset callback
680  * @cl_device: ISHTP client device instance
681  *
682  * Return: 0
683  */
684 static int cros_ec_ishtp_reset(struct ishtp_cl_device *cl_device)
685 {
686         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
687         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
688
689         schedule_work(&client_data->work_ishtp_reset);
690
691         return 0;
692 }
693
694 /**
695  * cros_ec_ishtp_suspend() - ISHTP client driver suspend callback
696  * @device: device instance
697  *
698  * Return: 0 for success, negative error code for failure.
699  */
700 static int __maybe_unused cros_ec_ishtp_suspend(struct device *device)
701 {
702         struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device);
703         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
704         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
705
706         return cros_ec_suspend(client_data->ec_dev);
707 }
708
709 /**
710  * cros_ec_ishtp_resume() - ISHTP client driver resume callback
711  * @device: device instance
712  *
713  * Return: 0 for success, negative error code for failure.
714  */
715 static int __maybe_unused cros_ec_ishtp_resume(struct device *device)
716 {
717         struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device);
718         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
719         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
720
721         return cros_ec_resume(client_data->ec_dev);
722 }
723
724 static SIMPLE_DEV_PM_OPS(cros_ec_ishtp_pm_ops, cros_ec_ishtp_suspend,
725                          cros_ec_ishtp_resume);
726
727 static struct ishtp_cl_driver   cros_ec_ishtp_driver = {
728         .name = "cros_ec_ishtp",
729         .id = cros_ec_ishtp_id_table,
730         .probe = cros_ec_ishtp_probe,
731         .remove = cros_ec_ishtp_remove,
732         .reset = cros_ec_ishtp_reset,
733         .driver = {
734                 .pm = &cros_ec_ishtp_pm_ops,
735         },
736 };
737
738 static int __init cros_ec_ishtp_mod_init(void)
739 {
740         return ishtp_cl_driver_register(&cros_ec_ishtp_driver, THIS_MODULE);
741 }
742
743 static void __exit cros_ec_ishtp_mod_exit(void)
744 {
745         ishtp_cl_driver_unregister(&cros_ec_ishtp_driver);
746 }
747
748 module_init(cros_ec_ishtp_mod_init);
749 module_exit(cros_ec_ishtp_mod_exit);
750
751 MODULE_DESCRIPTION("ChromeOS EC ISHTP Client Driver");
752 MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@intel.com>");
753
754 MODULE_LICENSE("GPL v2");