drivers/net/wireless/p54/p54spi.c

   1 /*
   2  * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
   3  * Copyright 2008       Johannes Berg <johannes@sipsolutions.net>
   4  *
   5  * This driver is a port from stlc45xx:
   6  *      Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/firmware.h>
  27 #include <linux/delay.h>
  28 #include <linux/irq.h>
  29 #include <linux/spi/spi.h>
  30 #include <linux/etherdevice.h>
  31 #include <linux/gpio.h>
  32 #include <linux/slab.h>
  33
  34 #include "p54spi.h"
  35 #include "p54spi_eeprom.h"
  36 #include "p54.h"
  37
  38 #include "lmac.h"
  39
  40 MODULE_FIRMWARE("3826.arm");
  41 MODULE_ALIAS("stlc45xx");
  42
  43 /*
  44  * gpios should be handled in board files and provided via platform data,
  45  * but because it's currently impossible for p54spi to have a header file
  46  * in include/linux, let's use module paramaters for now
  47  */
  48
  49 static int p54spi_gpio_power = 97;
  50 module_param(p54spi_gpio_power, int, 0444);
  51 MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
  52
  53 static int p54spi_gpio_irq = 87;
  54 module_param(p54spi_gpio_irq, int, 0444);
  55 MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
  56
  57 static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
  58                               void *buf, size_t len)
  59 {
  60         struct spi_transfer t[2];
  61         struct spi_message m;
  62         __le16 addr;
  63
  64         /* We first push the address */
  65         addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
  66
  67         spi_message_init(&m);
  68         memset(t, 0, sizeof(t));
  69
  70         t[0].tx_buf = &addr;
  71         t[0].len = sizeof(addr);
  72         spi_message_add_tail(&t[0], &m);
  73
  74         t[1].rx_buf = buf;
  75         t[1].len = len;
  76         spi_message_add_tail(&t[1], &m);
  77
  78         spi_sync(priv->spi, &m);
  79 }
  80
  81
  82 static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
  83                              const void *buf, size_t len)
  84 {
  85         struct spi_transfer t[3];
  86         struct spi_message m;
  87         __le16 addr;
  88
  89         /* We first push the address */
  90         addr = cpu_to_le16(address << 8);
  91
  92         spi_message_init(&m);
  93         memset(t, 0, sizeof(t));
  94
  95         t[0].tx_buf = &addr;
  96         t[0].len = sizeof(addr);
  97         spi_message_add_tail(&t[0], &m);
  98
  99         t[1].tx_buf = buf;
 100         t[1].len = len & ~1;
 101         spi_message_add_tail(&t[1], &m);
 102
 103         if (len % 2) {
 104                 __le16 last_word;
 105                 last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
 106
 107                 t[2].tx_buf = &last_word;
 108                 t[2].len = sizeof(last_word);
 109                 spi_message_add_tail(&t[2], &m);
 110         }
 111
 112         spi_sync(priv->spi, &m);
 113 }
 114
 115 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
 116 {
 117         __le32 val;
 118
 119         p54spi_spi_read(priv, addr, &val, sizeof(val));
 120
 121         return le32_to_cpu(val);
 122 }
 123
 124 static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
 125 {
 126         p54spi_spi_write(priv, addr, &val, sizeof(val));
 127 }
 128
 129 static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
 130 {
 131         p54spi_spi_write(priv, addr, &val, sizeof(val));
 132 }
 133
 134 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
 135 {
 136         int i;
 137
 138         for (i = 0; i < 2000; i++) {
 139                 u32 buffer = p54spi_read32(priv, reg);
 140                 if ((buffer & bits) == bits)
 141                         return 1;
 142         }
 143         return 0;
 144 }
 145
 146 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
 147                                 const void *buf, size_t len)
 148 {
 149         if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
 150                 dev_err(&priv->spi->dev, "spi_write_dma not allowed "
 151                         "to DMA write.\n");
 152                 return -EAGAIN;
 153         }
 154
 155         p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
 156                        cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
 157
 158         p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
 159         p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
 160         p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
 161         return 0;
 162 }
 163
 164 static int p54spi_request_firmware(struct ieee80211_hw *dev)
 165 {
 166         struct p54s_priv *priv = dev->priv;
 167         int ret;
 168
 169         /* FIXME: should driver use it's own struct device? */
 170         ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
 171
 172         if (ret < 0) {
 173                 dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
 174                 return ret;
 175         }
 176
 177         ret = p54_parse_firmware(dev, priv->firmware);
 178         if (ret) {
 179                 release_firmware(priv->firmware);
 180                 return ret;
 181         }
 182
 183         return 0;
 184 }
 185
 186 static int p54spi_request_eeprom(struct ieee80211_hw *dev)
 187 {
 188         struct p54s_priv *priv = dev->priv;
 189         const struct firmware *eeprom;
 190         int ret;
 191
 192         /*
 193          * allow users to customize their eeprom.
 194          */
 195
 196         ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
 197         if (ret < 0) {
 198                 dev_info(&priv->spi->dev, "loading default eeprom...\n");
 199                 ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
 200                                        sizeof(p54spi_eeprom));
 201         } else {
 202                 dev_info(&priv->spi->dev, "loading user eeprom...\n");
 203                 ret = p54_parse_eeprom(dev, (void *) eeprom->data,
 204                                        (int)eeprom->size);
 205                 release_firmware(eeprom);
 206         }
 207         return ret;
 208 }
 209
 210 static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 211 {
 212         struct p54s_priv *priv = dev->priv;
 213         unsigned long fw_len, _fw_len;
 214         unsigned int offset = 0;
 215         int err = 0;
 216         u8 *fw;
 217
 218         fw_len = priv->firmware->size;
 219         fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
 220         if (!fw)
 221                 return -ENOMEM;
 222
 223         /* stop the device */
 224         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 225                        SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
 226                        SPI_CTRL_STAT_START_HALTED));
 227
 228         msleep(TARGET_BOOT_SLEEP);
 229
 230         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 231                        SPI_CTRL_STAT_HOST_OVERRIDE |
 232                        SPI_CTRL_STAT_START_HALTED));
 233
 234         msleep(TARGET_BOOT_SLEEP);
 235
 236         while (fw_len > 0) {
 237                 _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
 238
 239                 err = p54spi_spi_write_dma(priv, cpu_to_le32(
 240                                            ISL38XX_DEV_FIRMWARE_ADDR + offset),
 241                                            (fw + offset), _fw_len);
 242                 if (err < 0)
 243                         goto out;
 244
 245                 fw_len -= _fw_len;
 246                 offset += _fw_len;
 247         }
 248
 249         BUG_ON(fw_len != 0);
 250
 251         /* enable host interrupts */
 252         p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
 253                        cpu_to_le32(SPI_HOST_INTS_DEFAULT));
 254
 255         /* boot the device */
 256         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 257                        SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
 258                        SPI_CTRL_STAT_RAM_BOOT));
 259
 260         msleep(TARGET_BOOT_SLEEP);
 261
 262         p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 263                        SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
 264         msleep(TARGET_BOOT_SLEEP);
 265
 266 out:
 267         kfree(fw);
 268         return err;
 269 }
 270
 271 static void p54spi_power_off(struct p54s_priv *priv)
 272 {
 273         disable_irq(gpio_to_irq(p54spi_gpio_irq));
 274         gpio_set_value(p54spi_gpio_power, 0);
 275 }
 276
 277 static void p54spi_power_on(struct p54s_priv *priv)
 278 {
 279         gpio_set_value(p54spi_gpio_power, 1);
 280         enable_irq(gpio_to_irq(p54spi_gpio_irq));
 281
 282         /*
 283          * need to wait a while before device can be accessed, the lenght
 284          * is just a guess
 285          */
 286         msleep(10);
 287 }
 288
 289 static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
 290 {
 291         p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
 292 }
 293
 294 static int p54spi_wakeup(struct p54s_priv *priv)
 295 {
 296         /* wake the chip */
 297         p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 298                        cpu_to_le32(SPI_TARGET_INT_WAKEUP));
 299
 300         /* And wait for the READY interrupt */
 301         if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
 302                              SPI_HOST_INT_READY)) {
 303                 dev_err(&priv->spi->dev, "INT_READY timeout\n");
 304                 return -EBUSY;
 305         }
 306
 307         p54spi_int_ack(priv, SPI_HOST_INT_READY);
 308         return 0;
 309 }
 310
 311 static inline void p54spi_sleep(struct p54s_priv *priv)
 312 {
 313         p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 314                        cpu_to_le32(SPI_TARGET_INT_SLEEP));
 315 }
 316
 317 static void p54spi_int_ready(struct p54s_priv *priv)
 318 {
 319         p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
 320                        SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
 321
 322         switch (priv->fw_state) {
 323         case FW_STATE_BOOTING:
 324                 priv->fw_state = FW_STATE_READY;
 325                 complete(&priv->fw_comp);
 326                 break;
 327         case FW_STATE_RESETTING:
 328                 priv->fw_state = FW_STATE_READY;
 329                 /* TODO: reinitialize state */
 330                 break;
 331         default:
 332                 break;
 333         }
 334 }
 335
 336 static int p54spi_rx(struct p54s_priv *priv)
 337 {
 338         struct sk_buff *skb;
 339         u16 len;
 340         u16 rx_head[2];
 341 #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
 342
 343         if (p54spi_wakeup(priv) < 0)
 344                 return -EBUSY;
 345
 346         /* Read data size and first data word in one SPI transaction
 347          * This is workaround for firmware/DMA bug,
 348          * when first data word gets lost under high load.
 349          */
 350         p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
 351         len = rx_head[0];
 352
 353         if (len == 0) {
 354                 p54spi_sleep(priv);
 355                 dev_err(&priv->spi->dev, "rx request of zero bytes\n");
 356                 return 0;
 357         }
 358
 359         /* Firmware may insert up to 4 padding bytes after the lmac header,
 360          * but it does not amend the size of SPI data transfer.
 361          * Such packets has correct data size in header, thus referencing
 362          * past the end of allocated skb. Reserve extra 4 bytes for this case */
 363         skb = dev_alloc_skb(len + 4);
 364         if (!skb) {
 365                 p54spi_sleep(priv);
 366                 dev_err(&priv->spi->dev, "could not alloc skb");
 367                 return -ENOMEM;
 368         }
 369
 370         if (len <= READAHEAD_SZ) {
 371                 memcpy(skb_put(skb, len), rx_head + 1, len);
 372         } else {
 373                 memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ);
 374                 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
 375                                 skb_put(skb, len - READAHEAD_SZ),
 376                                 len - READAHEAD_SZ);
 377         }
 378         p54spi_sleep(priv);
 379         /* Put additional bytes to compensate for the possible
 380          * alignment-caused truncation */
 381         skb_put(skb, 4);
 382
 383         if (p54_rx(priv->hw, skb) == 0)
 384                 dev_kfree_skb(skb);
 385
 386         return 0;
 387 }
 388
 389
 390 static irqreturn_t p54spi_interrupt(int irq, void *config)
 391 {
 392         struct spi_device *spi = config;
 393         struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
 394
 395         ieee80211_queue_work(priv->hw, &priv->work);
 396
 397         return IRQ_HANDLED;
 398 }
 399
 400 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
 401 {
 402         struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 403         int ret = 0;
 404
 405         if (p54spi_wakeup(priv) < 0)
 406                 return -EBUSY;
 407
 408         ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
 409         if (ret < 0)
 410                 goto out;
 411
 412         if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
 413                              SPI_HOST_INT_WR_READY)) {
 414                 dev_err(&priv->spi->dev, "WR_READY timeout\n");
 415                 ret = -EAGAIN;
 416                 goto out;
 417         }
 418
 419         p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
 420
 421         if (FREE_AFTER_TX(skb))
 422                 p54_free_skb(priv->hw, skb);
 423 out:
 424         p54spi_sleep(priv);
 425         return ret;
 426 }
 427
 428 static int p54spi_wq_tx(struct p54s_priv *priv)
 429 {
 430         struct p54s_tx_info *entry;
 431         struct sk_buff *skb;
 432         struct ieee80211_tx_info *info;
 433         struct p54_tx_info *minfo;
 434         struct p54s_tx_info *dinfo;
 435         unsigned long flags;
 436         int ret = 0;
 437
 438         spin_lock_irqsave(&priv->tx_lock, flags);
 439
 440         while (!list_empty(&priv->tx_pending)) {
 441                 entry = list_entry(priv->tx_pending.next,
 442                                    struct p54s_tx_info, tx_list);
 443
 444                 list_del_init(&entry->tx_list);
 445
 446                 spin_unlock_irqrestore(&priv->tx_lock, flags);
 447
 448                 dinfo = container_of((void *) entry, struct p54s_tx_info,
 449                                      tx_list);
 450                 minfo = container_of((void *) dinfo, struct p54_tx_info,
 451                                      data);
 452                 info = container_of((void *) minfo, struct ieee80211_tx_info,
 453                                     rate_driver_data);
 454                 skb = container_of((void *) info, struct sk_buff, cb);
 455
 456                 ret = p54spi_tx_frame(priv, skb);
 457
 458                 if (ret < 0) {
 459                         p54_free_skb(priv->hw, skb);
 460                         return ret;
 461                 }
 462
 463                 spin_lock_irqsave(&priv->tx_lock, flags);
 464         }
 465         spin_unlock_irqrestore(&priv->tx_lock, flags);
 466         return ret;
 467 }
 468
 469 static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 470 {
 471         struct p54s_priv *priv = dev->priv;
 472         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 473         struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
 474         struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
 475         unsigned long flags;
 476
 477         BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
 478
 479         spin_lock_irqsave(&priv->tx_lock, flags);
 480         list_add_tail(&di->tx_list, &priv->tx_pending);
 481         spin_unlock_irqrestore(&priv->tx_lock, flags);
 482
 483         ieee80211_queue_work(priv->hw, &priv->work);
 484 }
 485
 486 static void p54spi_work(struct work_struct *work)
 487 {
 488         struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
 489         u32 ints;
 490         int ret;
 491
 492         mutex_lock(&priv->mutex);
 493
 494         if (priv->fw_state == FW_STATE_OFF)
 495                 goto out;
 496
 497         ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
 498
 499         if (ints & SPI_HOST_INT_READY) {
 500                 p54spi_int_ready(priv);
 501                 p54spi_int_ack(priv, SPI_HOST_INT_READY);
 502         }
 503
 504         if (priv->fw_state != FW_STATE_READY)
 505                 goto out;
 506
 507         if (ints & SPI_HOST_INT_UPDATE) {
 508                 p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
 509                 ret = p54spi_rx(priv);
 510                 if (ret < 0)
 511                         goto out;
 512         }
 513         if (ints & SPI_HOST_INT_SW_UPDATE) {
 514                 p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
 515                 ret = p54spi_rx(priv);
 516                 if (ret < 0)
 517                         goto out;
 518         }
 519
 520         ret = p54spi_wq_tx(priv);
 521 out:
 522         mutex_unlock(&priv->mutex);
 523 }
 524
 525 static int p54spi_op_start(struct ieee80211_hw *dev)
 526 {
 527         struct p54s_priv *priv = dev->priv;
 528         unsigned long timeout;
 529         int ret = 0;
 530
 531         if (mutex_lock_interruptible(&priv->mutex)) {
 532                 ret = -EINTR;
 533                 goto out;
 534         }
 535
 536         priv->fw_state = FW_STATE_BOOTING;
 537
 538         p54spi_power_on(priv);
 539
 540         ret = p54spi_upload_firmware(dev);
 541         if (ret < 0) {
 542                 p54spi_power_off(priv);
 543                 goto out_unlock;
 544         }
 545
 546         mutex_unlock(&priv->mutex);
 547
 548         timeout = msecs_to_jiffies(2000);
 549         timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
 550                                                             timeout);
 551         if (!timeout) {
 552                 dev_err(&priv->spi->dev, "firmware boot failed");
 553                 p54spi_power_off(priv);
 554                 ret = -1;
 555                 goto out;
 556         }
 557
 558         if (mutex_lock_interruptible(&priv->mutex)) {
 559                 ret = -EINTR;
 560                 p54spi_power_off(priv);
 561                 goto out;
 562         }
 563
 564         WARN_ON(priv->fw_state != FW_STATE_READY);
 565
 566 out_unlock:
 567         mutex_unlock(&priv->mutex);
 568
 569 out:
 570         return ret;
 571 }
 572
 573 static void p54spi_op_stop(struct ieee80211_hw *dev)
 574 {
 575         struct p54s_priv *priv = dev->priv;
 576         unsigned long flags;
 577
 578         if (mutex_lock_interruptible(&priv->mutex)) {
 579                 /* FIXME: how to handle this error? */
 580                 return;
 581         }
 582
 583         WARN_ON(priv->fw_state != FW_STATE_READY);
 584
 585         cancel_work_sync(&priv->work);
 586
 587         p54spi_power_off(priv);
 588         spin_lock_irqsave(&priv->tx_lock, flags);
 589         INIT_LIST_HEAD(&priv->tx_pending);
 590         spin_unlock_irqrestore(&priv->tx_lock, flags);
 591
 592         priv->fw_state = FW_STATE_OFF;
 593         mutex_unlock(&priv->mutex);
 594 }
 595
 596 static int __devinit p54spi_probe(struct spi_device *spi)
 597 {
 598         struct p54s_priv *priv = NULL;
 599         struct ieee80211_hw *hw;
 600         int ret = -EINVAL;
 601
 602         hw = p54_init_common(sizeof(*priv));
 603         if (!hw) {
 604                 dev_err(&spi->dev, "could not alloc ieee80211_hw");
 605                 return -ENOMEM;
 606         }
 607
 608         priv = hw->priv;
 609         priv->hw = hw;
 610         dev_set_drvdata(&spi->dev, priv);
 611         priv->spi = spi;
 612
 613         spi->bits_per_word = 16;
 614         spi->max_speed_hz = 24000000;
 615
 616         ret = spi_setup(spi);
 617         if (ret < 0) {
 618                 dev_err(&priv->spi->dev, "spi_setup failed");
 619                 goto err_free_common;
 620         }
 621
 622         ret = gpio_request(p54spi_gpio_power, "p54spi power");
 623         if (ret < 0) {
 624                 dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
 625                 goto err_free_common;
 626         }
 627
 628         ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 629         if (ret < 0) {
 630                 dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
 631                 goto err_free_common;
 632         }
 633
 634         gpio_direction_output(p54spi_gpio_power, 0);
 635         gpio_direction_input(p54spi_gpio_irq);
 636
 637         ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
 638                           p54spi_interrupt, IRQF_DISABLED, "p54spi",
 639                           priv->spi);
 640         if (ret < 0) {
 641                 dev_err(&priv->spi->dev, "request_irq() failed");
 642                 goto err_free_common;
 643         }
 644
 645         set_irq_type(gpio_to_irq(p54spi_gpio_irq),
 646                      IRQ_TYPE_EDGE_RISING);
 647
 648         disable_irq(gpio_to_irq(p54spi_gpio_irq));
 649
 650         INIT_WORK(&priv->work, p54spi_work);
 651         init_completion(&priv->fw_comp);
 652         INIT_LIST_HEAD(&priv->tx_pending);
 653         mutex_init(&priv->mutex);
 654         SET_IEEE80211_DEV(hw, &spi->dev);
 655         priv->common.open = p54spi_op_start;
 656         priv->common.stop = p54spi_op_stop;
 657         priv->common.tx = p54spi_op_tx;
 658
 659         ret = p54spi_request_firmware(hw);
 660         if (ret < 0)
 661                 goto err_free_common;
 662
 663         ret = p54spi_request_eeprom(hw);
 664         if (ret)
 665                 goto err_free_common;
 666
 667         ret = p54_register_common(hw, &priv->spi->dev);
 668         if (ret)
 669                 goto err_free_common;
 670
 671         return 0;
 672
 673 err_free_common:
 674         p54_free_common(priv->hw);
 675         return ret;
 676 }
 677
 678 static int __devexit p54spi_remove(struct spi_device *spi)
 679 {
 680         struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
 681
 682         p54_unregister_common(priv->hw);
 683
 684         free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
 685
 686         gpio_free(p54spi_gpio_power);
 687         gpio_free(p54spi_gpio_irq);
 688         release_firmware(priv->firmware);
 689
 690         mutex_destroy(&priv->mutex);
 691
 692         p54_free_common(priv->hw);
 693
 694         return 0;
 695 }
 696
 697
 698 static struct spi_driver p54spi_driver = {
 699         .driver = {
 700                 /* use cx3110x name because board-n800.c uses that for the
 701                  * SPI port */
 702                 .name           = "cx3110x",
 703                 .bus            = &spi_bus_type,
 704                 .owner          = THIS_MODULE,
 705         },
 706
 707         .probe          = p54spi_probe,
 708         .remove         = __devexit_p(p54spi_remove),
 709 };
 710
 711 static int __init p54spi_init(void)
 712 {
 713         int ret;
 714
 715         ret = spi_register_driver(&p54spi_driver);
 716         if (ret < 0) {
 717                 printk(KERN_ERR "failed to register SPI driver: %d", ret);
 718                 goto out;
 719         }
 720
 721 out:
 722         return ret;
 723 }
 724
 725 static void __exit p54spi_exit(void)
 726 {
 727         spi_unregister_driver(&p54spi_driver);
 728 }
 729
 730 module_init(p54spi_init);
 731 module_exit(p54spi_exit);
 732
 733 MODULE_LICENSE("GPL");
 734 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
 735 MODULE_ALIAS("spi:cx3110x");