Merge git://git.infradead.org/~kmpark/onenand-mtd-2.6
[sfrench/cifs-2.6.git] / drivers / net / wireless / iwlwifi / Kconfig
1 config IWL4965
2         tristate "Intel Wireless WiFi 4965AGN"
3         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
4         select FW_LOADER
5         ---help---
6           Select to build the driver supporting the:
7
8           Intel Wireless WiFi Link 4965AGN
9
10           This driver uses the kernel's mac80211 subsystem.
11
12           In order to use this driver, you will need a microcode (uCode)
13           image for it. You can obtain the microcode from:
14
15                   <http://intellinuxwireless.org/>.
16
17           The microcode is typically installed in /lib/firmware. You can
18           look in the hotplug script /etc/hotplug/firmware.agent to
19           determine which directory FIRMWARE_DIR is set to when the script
20           runs.
21
22           If you want to compile the driver as a module ( = code which can be
23           inserted in and remvoed from the running kernel whenever you want),
24           say M here and read <file:Documentation/kbuild/modules.txt>.  The
25           module will be called iwl4965.ko.
26
27 config IWL4965_QOS
28         bool "Enable Wireless QoS in iwl4965 driver"
29         depends on IWL4965
30         ---help---
31           This option will enable wireless quality of service (QoS) for the
32           iwl4965 driver.
33
34 config IWL4965_HT
35         bool "Enable 802.11n HT features in iwl4965 driver"
36         depends on EXPERIMENTAL
37         depends on IWL4965 && IWL4965_QOS
38         depends on n
39         ---help---
40           This option enables IEEE 802.11n High Throughput features
41           for the iwl4965 driver.
42
43 config IWL4965_SPECTRUM_MEASUREMENT
44         bool "Enable Spectrum Measurement in iwl4965 driver"
45         depends on IWL4965
46         ---help---
47           This option will enable spectrum measurement for the iwl4965 driver.
48
49 config IWL4965_SENSITIVITY
50         bool "Enable Sensitivity Calibration in iwl4965 driver"
51         depends on IWL4965
52         ---help---
53           This option will enable sensitivity calibration for the iwl4965
54           driver.
55
56 config IWL4965_DEBUG
57         bool "Enable full debugging output in iwl4965 driver"
58         depends on IWL4965
59         ---help---
60           This option will enable debug tracing output for the iwl4965
61           driver.
62
63           This will result in the kernel module being ~100k larger.  You can
64           control which debug output is sent to the kernel log by setting the
65           value in
66
67                   /sys/bus/pci/drivers/${DRIVER}/debug_level
68
69           This entry will only exist if this option is enabled.
70
71           To set a value, simply echo an 8-byte hex value to the same file:
72
73                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
74
75           You can find the list of debug mask values in:
76                   drivers/net/wireless/iwlwifi/iwl-4965-debug.h
77
78           If this is your first time using this driver, you should say Y here
79           as the debug information can assist others in helping you resolve
80           any problems you may encounter.
81
82 config IWL3945
83         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
84         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
85         select FW_LOADER
86         ---help---
87           Select to build the driver supporting the:
88
89           Intel PRO/Wireless 3945ABG/BG Network Connection
90
91           This driver uses the kernel's mac80211 subsystem.
92
93           In order to use this driver, you will need a microcode (uCode)
94           image for it. You can obtain the microcode from:
95
96                   <http://intellinuxwireless.org/>.
97
98           The microcode is typically installed in /lib/firmware. You can
99           look in the hotplug script /etc/hotplug/firmware.agent to
100           determine which directory FIRMWARE_DIR is set to when the script
101           runs.
102
103           If you want to compile the driver as a module ( = code which can be
104           inserted in and remvoed from the running kernel whenever you want),
105           say M here and read <file:Documentation/kbuild/modules.txt>.  The
106           module will be called iwl3945.ko.
107
108 config IWL3945_QOS
109         bool "Enable Wireless QoS in iwl3945 driver"
110         depends on IWL3945
111         ---help---
112           This option will enable wireless quality of service (QoS) for the
113           iwl3945 driver.
114
115 config IWL3945_SPECTRUM_MEASUREMENT
116         bool "Enable Spectrum Measurement in iwl3945 drivers"
117         depends on IWL3945
118         ---help---
119           This option will enable spectrum measurement for the iwl3945 driver.
120
121 config IWL3945_DEBUG
122         bool "Enable full debugging output in iwl3945 driver"
123         depends on IWL3945
124         ---help---
125           This option will enable debug tracing output for the iwl3945
126           driver.
127
128           This will result in the kernel module being ~100k larger.  You can
129           control which debug output is sent to the kernel log by setting the
130           value in
131
132                   /sys/bus/pci/drivers/${DRIVER}/debug_level
133
134           This entry will only exist if this option is enabled.
135
136           To set a value, simply echo an 8-byte hex value to the same file:
137
138                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
139
140           You can find the list of debug mask values in:
141                   drivers/net/wireless/iwlwifi/iwl-3945-debug.h
142
143           If this is your first time using this driver, you should say Y here
144           as the debug information can assist others in helping you resolve
145           any problems you may encounter.
146