Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/cs47l24', 'asoc...
[sfrench/cifs-2.6.git] / drivers / net / phy / mdio-mux-bcm-iproc.c
1 /*
2  * Copyright 2016 Broadcom
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License, version 2, as
6  * published by the Free Software Foundation (the "GPL").
7  *
8  * This program is distributed in the hope that it will be useful, but
9  * WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
11  * General Public License version 2 (GPLv2) for more details.
12  *
13  * You should have received a copy of the GNU General Public License
14  * version 2 (GPLv2) along with this source code.
15  */
16
17 #include <linux/platform_device.h>
18 #include <linux/device.h>
19 #include <linux/of_mdio.h>
20 #include <linux/module.h>
21 #include <linux/phy.h>
22 #include <linux/mdio-mux.h>
23 #include <linux/delay.h>
24
25 #define MDIO_PARAM_OFFSET               0x00
26 #define MDIO_PARAM_MIIM_CYCLE           29
27 #define MDIO_PARAM_INTERNAL_SEL         25
28 #define MDIO_PARAM_BUS_ID               22
29 #define MDIO_PARAM_C45_SEL              21
30 #define MDIO_PARAM_PHY_ID               16
31 #define MDIO_PARAM_PHY_DATA             0
32
33 #define MDIO_READ_OFFSET                0x04
34 #define MDIO_READ_DATA_MASK             0xffff
35 #define MDIO_ADDR_OFFSET                0x08
36
37 #define MDIO_CTRL_OFFSET                0x0C
38 #define MDIO_CTRL_WRITE_OP              0x1
39 #define MDIO_CTRL_READ_OP               0x2
40
41 #define MDIO_STAT_OFFSET                0x10
42 #define MDIO_STAT_DONE                  1
43
44 #define BUS_MAX_ADDR                    32
45 #define EXT_BUS_START_ADDR              16
46
47 struct iproc_mdiomux_desc {
48         void *mux_handle;
49         void __iomem *base;
50         struct device *dev;
51         struct mii_bus *mii_bus;
52 };
53
54 static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
55 {
56         unsigned int timeout = 1000; /* loop for 1s */
57         u32 val;
58
59         do {
60                 val = readl(base + MDIO_STAT_OFFSET);
61                 if ((val & MDIO_STAT_DONE) == result)
62                         return 0;
63
64                 usleep_range(1000, 2000);
65         } while (timeout--);
66
67         return -ETIMEDOUT;
68 }
69
70 /* start_miim_ops- Program and start MDIO transaction over mdio bus.
71  * @base: Base address
72  * @phyid: phyid of the selected bus.
73  * @reg: register offset to be read/written.
74  * @val :0 if read op else value to be written in @reg;
75  * @op: Operation that need to be carried out.
76  *      MDIO_CTRL_READ_OP: Read transaction.
77  *      MDIO_CTRL_WRITE_OP: Write transaction.
78  *
79  * Return value: Successful Read operation returns read reg values and write
80  *      operation returns 0. Failure operation returns negative error code.
81  */
82 static int start_miim_ops(void __iomem *base,
83                           u16 phyid, u32 reg, u16 val, u32 op)
84 {
85         u32 param;
86         int ret;
87
88         writel(0, base + MDIO_CTRL_OFFSET);
89         ret = iproc_mdio_wait_for_idle(base, 0);
90         if (ret)
91                 goto err;
92
93         param = readl(base + MDIO_PARAM_OFFSET);
94         param |= phyid << MDIO_PARAM_PHY_ID;
95         param |= val << MDIO_PARAM_PHY_DATA;
96         if (reg & MII_ADDR_C45)
97                 param |= BIT(MDIO_PARAM_C45_SEL);
98
99         writel(param, base + MDIO_PARAM_OFFSET);
100
101         writel(reg, base + MDIO_ADDR_OFFSET);
102
103         writel(op, base + MDIO_CTRL_OFFSET);
104
105         ret = iproc_mdio_wait_for_idle(base, 1);
106         if (ret)
107                 goto err;
108
109         if (op == MDIO_CTRL_READ_OP)
110                 ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
111 err:
112         return ret;
113 }
114
115 static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg)
116 {
117         struct iproc_mdiomux_desc *md = bus->priv;
118         int ret;
119
120         ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP);
121         if (ret < 0)
122                 dev_err(&bus->dev, "mdiomux read operation failed!!!");
123
124         return ret;
125 }
126
127 static int iproc_mdiomux_write(struct mii_bus *bus,
128                                int phyid, int reg, u16 val)
129 {
130         struct iproc_mdiomux_desc *md = bus->priv;
131         int ret;
132
133         /* Write val at reg offset */
134         ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP);
135         if (ret < 0)
136                 dev_err(&bus->dev, "mdiomux write operation failed!!!");
137
138         return ret;
139 }
140
141 static int mdio_mux_iproc_switch_fn(int current_child, int desired_child,
142                                     void *data)
143 {
144         struct iproc_mdiomux_desc *md = data;
145         u32 param, bus_id;
146         bool bus_dir;
147
148         /* select bus and its properties */
149         bus_dir = (desired_child < EXT_BUS_START_ADDR);
150         bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR);
151
152         param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
153         param |= (bus_id << MDIO_PARAM_BUS_ID);
154
155         writel(param, md->base + MDIO_PARAM_OFFSET);
156         return 0;
157 }
158
159 static int mdio_mux_iproc_probe(struct platform_device *pdev)
160 {
161         struct iproc_mdiomux_desc *md;
162         struct mii_bus *bus;
163         struct resource *res;
164         int rc;
165
166         md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
167         if (!md)
168                 return -ENOMEM;
169         md->dev = &pdev->dev;
170
171         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
172         md->base = devm_ioremap_resource(&pdev->dev, res);
173         if (IS_ERR(md->base)) {
174                 dev_err(&pdev->dev, "failed to ioremap register\n");
175                 return PTR_ERR(md->base);
176         }
177
178         md->mii_bus = mdiobus_alloc();
179         if (!md->mii_bus) {
180                 dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
181                 return -ENOMEM;
182         }
183
184         bus = md->mii_bus;
185         bus->priv = md;
186         bus->name = "iProc MDIO mux bus";
187         snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
188         bus->parent = &pdev->dev;
189         bus->read = iproc_mdiomux_read;
190         bus->write = iproc_mdiomux_write;
191
192         bus->phy_mask = ~0;
193         bus->dev.of_node = pdev->dev.of_node;
194         rc = mdiobus_register(bus);
195         if (rc) {
196                 dev_err(&pdev->dev, "mdiomux registration failed\n");
197                 goto out;
198         }
199
200         platform_set_drvdata(pdev, md);
201
202         rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn,
203                            &md->mux_handle, md, md->mii_bus);
204         if (rc) {
205                 dev_info(md->dev, "mdiomux initialization failed\n");
206                 goto out_register;
207         }
208
209         dev_info(md->dev, "iProc mdiomux registered\n");
210         return 0;
211
212 out_register:
213         mdiobus_unregister(bus);
214 out:
215         mdiobus_free(bus);
216         return rc;
217 }
218
219 static int mdio_mux_iproc_remove(struct platform_device *pdev)
220 {
221         struct iproc_mdiomux_desc *md = dev_get_platdata(&pdev->dev);
222
223         mdio_mux_uninit(md->mux_handle);
224         mdiobus_unregister(md->mii_bus);
225         mdiobus_free(md->mii_bus);
226
227         return 0;
228 }
229
230 static const struct of_device_id mdio_mux_iproc_match[] = {
231         {
232                 .compatible = "brcm,mdio-mux-iproc",
233         },
234         {},
235 };
236 MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match);
237
238 static struct platform_driver mdiomux_iproc_driver = {
239         .driver = {
240                 .name           = "mdio-mux-iproc",
241                 .of_match_table = mdio_mux_iproc_match,
242         },
243         .probe          = mdio_mux_iproc_probe,
244         .remove         = mdio_mux_iproc_remove,
245 };
246
247 module_platform_driver(mdiomux_iproc_driver);
248
249 MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver");
250 MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
251 MODULE_LICENSE("GPL v2");