drivers/net/ibm_emac/ibm_emac_core.c

   1 /*
   2  * ibm_emac_core.c
   3  *
   4  * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
   5  * processors.
   6  *
   7  * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
   8  *
   9  * Based on original work by
  10  *
  11  *      Armin Kuster <akuster@mvista.com>
  12  *      Johnnie Peters <jpeters@mvista.com>
  13  *
  14  * This program is free software; you can redistribute  it and/or modify it
  15  * under  the terms of  the GNU General  Public License as published by the
  16  * Free Software Foundation;  either version 2 of the  License, or (at your
  17  * option) any later version.
  18  * TODO
  19  *       - Check for races in the "remove" code path
  20  *       - Add some Power Management to the MAC and the PHY
  21  *       - Audit remaining of non-rewritten code (--BenH)
  22  *       - Cleanup message display using msglevel mecanism
  23  *       - Address all errata
  24  *       - Audit all register update paths to ensure they
  25  *         are being written post soft reset if required.
  26  */
  27 #include <linux/module.h>
  28 #include <linux/kernel.h>
  29 #include <linux/sched.h>
  30 #include <linux/string.h>
  31 #include <linux/timer.h>
  32 #include <linux/ptrace.h>
  33 #include <linux/errno.h>
  34 #include <linux/ioport.h>
  35 #include <linux/slab.h>
  36 #include <linux/interrupt.h>
  37 #include <linux/delay.h>
  38 #include <linux/init.h>
  39 #include <linux/types.h>
  40 #include <linux/dma-mapping.h>
  41 #include <linux/ethtool.h>
  42 #include <linux/mii.h>
  43 #include <linux/bitops.h>
  44
  45 #include <asm/processor.h>
  46 #include <asm/io.h>
  47 #include <asm/dma.h>
  48 #include <asm/irq.h>
  49 #include <asm/uaccess.h>
  50 #include <asm/ocp.h>
  51
  52 #include <linux/netdevice.h>
  53 #include <linux/etherdevice.h>
  54 #include <linux/skbuff.h>
  55 #include <linux/crc32.h>
  56
  57 #include "ibm_emac_core.h"
  58
  59 //#define MDIO_DEBUG(fmt) printk fmt
  60 #define MDIO_DEBUG(fmt)
  61
  62 //#define LINK_DEBUG(fmt) printk fmt
  63 #define LINK_DEBUG(fmt)
  64
  65 //#define PKT_DEBUG(fmt) printk fmt
  66 #define PKT_DEBUG(fmt)
  67
  68 #define DRV_NAME        "emac"
  69 #define DRV_VERSION     "2.0"
  70 #define DRV_AUTHOR      "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
  71 #define DRV_DESC        "IBM EMAC Ethernet driver"
  72
  73 /*
  74  * When mdio_idx >= 0, contains a list of emac ocp_devs
  75  * that have had their initialization deferred until the
  76  * common MDIO controller has been initialized.
  77  */
  78 LIST_HEAD(emac_init_list);
  79
  80 MODULE_AUTHOR(DRV_AUTHOR);
  81 MODULE_DESCRIPTION(DRV_DESC);
  82 MODULE_LICENSE("GPL");
  83
  84 static int skb_res = SKB_RES;
  85 module_param(skb_res, int, 0444);
  86 MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
  87                  "The 405 handles a misaligned IP header fine but\n"
  88                  "this can help if you are routing to a tunnel or a\n"
  89                  "device that needs aligned data. 0..2");
  90
  91 #define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
  92
  93 static unsigned int rgmii_enable[] = {
  94         RGMII_RTBI,
  95         RGMII_RGMII,
  96         RGMII_TBI,
  97         RGMII_GMII
  98 };
  99
 100 static unsigned int rgmii_speed_mask[] = {
 101         RGMII_MII2_SPDMASK,
 102         RGMII_MII3_SPDMASK
 103 };
 104
 105 static unsigned int rgmii_speed100[] = {
 106         RGMII_MII2_100MB,
 107         RGMII_MII3_100MB
 108 };
 109
 110 static unsigned int rgmii_speed1000[] = {
 111         RGMII_MII2_1000MB,
 112         RGMII_MII3_1000MB
 113 };
 114
 115 #define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
 116
 117 static unsigned int zmii_enable[][4] = {
 118         {ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
 119          ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
 120         {ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
 121          ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
 122         {ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
 123          ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
 124         {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
 125 };
 126
 127 static unsigned int mdi_enable[] = {
 128         ZMII_MDI0,
 129         ZMII_MDI1,
 130         ZMII_MDI2,
 131         ZMII_MDI3
 132 };
 133
 134 static unsigned int zmii_speed = 0x0;
 135 static unsigned int zmii_speed100[] = {
 136         ZMII_MII0_100MB,
 137         ZMII_MII1_100MB,
 138         ZMII_MII2_100MB,
 139         ZMII_MII3_100MB
 140 };
 141
 142 /* Since multiple EMACs share MDIO lines in various ways, we need
 143  * to avoid re-using the same PHY ID in cases where the arch didn't
 144  * setup precise phy_map entries
 145  */
 146 static u32 busy_phy_map = 0;
 147
 148 /* If EMACs share a common MDIO device, this points to it */
 149 static struct net_device *mdio_ndev = NULL;
 150
 151 struct emac_def_dev {
 152         struct list_head link;
 153         struct ocp_device *ocpdev;
 154         struct ibm_ocp_mal *mal;
 155 };
 156
 157 static struct net_device_stats *emac_stats(struct net_device *dev)
 158 {
 159         struct ocp_enet_private *fep = dev->priv;
 160         return &fep->stats;
 161 };
 162
 163 static int
 164 emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
 165 {
 166         struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
 167         const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
 168         int mode = -1;
 169
 170         if (!rgmii) {
 171                 rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
 172
 173                 if (rgmii == NULL) {
 174                         printk(KERN_ERR
 175                                "rgmii%d: Out of memory allocating RGMII structure!\n",
 176                                rgmii_dev->def->index);
 177                         return -ENOMEM;
 178                 }
 179
 180                 memset(rgmii, 0, sizeof(*rgmii));
 181
 182                 rgmii->base =
 183                     (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
 184                                                  sizeof(*rgmii->base));
 185                 if (rgmii->base == NULL) {
 186                         printk(KERN_ERR
 187                                "rgmii%d: Cannot ioremap bridge registers!\n",
 188                                rgmii_dev->def->index);
 189
 190                         kfree(rgmii);
 191                         return -ENOMEM;
 192                 }
 193                 ocp_set_drvdata(rgmii_dev, rgmii);
 194         }
 195
 196         if (phy_mode) {
 197                 switch (phy_mode) {
 198                 case PHY_MODE_GMII:
 199                         mode = GMII;
 200                         break;
 201                 case PHY_MODE_TBI:
 202                         mode = TBI;
 203                         break;
 204                 case PHY_MODE_RTBI:
 205                         mode = RTBI;
 206                         break;
 207                 case PHY_MODE_RGMII:
 208                 default:
 209                         mode = RGMII;
 210                 }
 211                 rgmii->base->fer &= ~RGMII_FER_MASK(input);
 212                 rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
 213         } else {
 214                 switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
 215                                                                        input)) {
 216                 case RGMII_RTBI:
 217                         mode = RTBI;
 218                         break;
 219                 case RGMII_RGMII:
 220                         mode = RGMII;
 221                         break;
 222                 case RGMII_TBI:
 223                         mode = TBI;
 224                         break;
 225                 case RGMII_GMII:
 226                         mode = GMII;
 227                 }
 228         }
 229
 230         /* Set mode to RGMII if nothing valid is detected */
 231         if (mode < 0)
 232                 mode = RGMII;
 233
 234         printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
 235                rgmii_dev->def->index, input, mode_name[mode]);
 236
 237         rgmii->mode[input] = mode;
 238         rgmii->users++;
 239
 240         return 0;
 241 }
 242
 243 static void
 244 emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
 245 {
 246         struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
 247         unsigned int rgmii_speed;
 248
 249         rgmii_speed = in_be32(&rgmii->base->ssr);
 250
 251         rgmii_speed &= ~rgmii_speed_mask[input];
 252
 253         if (speed == 1000)
 254                 rgmii_speed |= rgmii_speed1000[input];
 255         else if (speed == 100)
 256                 rgmii_speed |= rgmii_speed100[input];
 257
 258         out_be32(&rgmii->base->ssr, rgmii_speed);
 259 }
 260
 261 static void emac_close_rgmii(struct ocp_device *ocpdev)
 262 {
 263         struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
 264         BUG_ON(!rgmii || rgmii->users == 0);
 265
 266         if (!--rgmii->users) {
 267                 ocp_set_drvdata(ocpdev, NULL);
 268                 iounmap((void *)rgmii->base);
 269                 kfree(rgmii);
 270         }
 271 }
 272
 273 static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
 274 {
 275         struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
 276         const char *mode_name[] = { "SMII", "RMII", "MII" };
 277         int mode = -1;
 278
 279         if (!zmii) {
 280                 zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
 281                 if (zmii == NULL) {
 282                         printk(KERN_ERR
 283                                "zmii%d: Out of memory allocating ZMII structure!\n",
 284                                zmii_dev->def->index);
 285                         return -ENOMEM;
 286                 }
 287                 memset(zmii, 0, sizeof(*zmii));
 288
 289                 zmii->base =
 290                     (struct zmii_regs *)ioremap(zmii_dev->def->paddr,
 291                                                 sizeof(*zmii->base));
 292                 if (zmii->base == NULL) {
 293                         printk(KERN_ERR
 294                                "zmii%d: Cannot ioremap bridge registers!\n",
 295                                zmii_dev->def->index);
 296
 297                         kfree(zmii);
 298                         return -ENOMEM;
 299                 }
 300                 ocp_set_drvdata(zmii_dev, zmii);
 301         }
 302
 303         if (phy_mode) {
 304                 switch (phy_mode) {
 305                 case PHY_MODE_MII:
 306                         mode = MII;
 307                         break;
 308                 case PHY_MODE_RMII:
 309                         mode = RMII;
 310                         break;
 311                 case PHY_MODE_SMII:
 312                 default:
 313                         mode = SMII;
 314                 }
 315                 zmii->base->fer &= ~ZMII_FER_MASK(input);
 316                 zmii->base->fer |= zmii_enable[input][mode];
 317         } else {
 318                 switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
 319                 case ZMII_MII0:
 320                         mode = MII;
 321                         break;
 322                 case ZMII_RMII0:
 323                         mode = RMII;
 324                         break;
 325                 case ZMII_SMII0:
 326                         mode = SMII;
 327                 }
 328         }
 329
 330         /* Set mode to SMII if nothing valid is detected */
 331         if (mode < 0)
 332                 mode = SMII;
 333
 334         printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
 335                zmii_dev->def->index, input, mode_name[mode]);
 336
 337         zmii->mode[input] = mode;
 338         zmii->users++;
 339
 340         return 0;
 341 }
 342
 343 static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
 344 {
 345         u32 mask;
 346         struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
 347
 348         mask = in_be32(&zmii->base->fer);
 349         mask &= zmii_enable[input][MDI];        /* turn all non enabled MDI's off */
 350         mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
 351         out_be32(&zmii->base->fer, mask);
 352 }
 353
 354 static void
 355 emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
 356 {
 357         struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
 358
 359         if (speed == 100)
 360                 zmii_speed |= zmii_speed100[input];
 361         else
 362                 zmii_speed &= ~zmii_speed100[input];
 363
 364         out_be32(&zmii->base->ssr, zmii_speed);
 365 }
 366
 367 static void emac_close_zmii(struct ocp_device *ocpdev)
 368 {
 369         struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
 370         BUG_ON(!zmii || zmii->users == 0);
 371
 372         if (!--zmii->users) {
 373                 ocp_set_drvdata(ocpdev, NULL);
 374                 iounmap((void *)zmii->base);
 375                 kfree(zmii);
 376         }
 377 }
 378
 379 int emac_phy_read(struct net_device *dev, int mii_id, int reg)
 380 {
 381         int count;
 382         uint32_t stacr;
 383         struct ocp_enet_private *fep = dev->priv;
 384         emac_t *emacp = fep->emacp;
 385
 386         MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
 387                     reg));
 388
 389         /* Enable proper ZMII port */
 390         if (fep->zmii_dev)
 391                 emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
 392
 393         /* Use the EMAC that has the MDIO port */
 394         if (fep->mdio_dev) {
 395                 dev = fep->mdio_dev;
 396                 fep = dev->priv;
 397                 emacp = fep->emacp;
 398         }
 399
 400         count = 0;
 401         while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
 402                                         && (count++ < MDIO_DELAY))
 403                 udelay(1);
 404         MDIO_DEBUG((" (count was %d)\n", count));
 405
 406         if ((stacr & EMAC_STACR_OC) == 0) {
 407                 printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
 408                 return -1;
 409         }
 410
 411         /* Clear the speed bits and make a read request to the PHY */
 412         stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
 413         stacr |= ((mii_id & 0x1F) << 5);
 414
 415         out_be32(&emacp->em0stacr, stacr);
 416
 417         count = 0;
 418         while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
 419                                         && (count++ < MDIO_DELAY))
 420                 udelay(1);
 421         MDIO_DEBUG((" (count was %d)\n", count));
 422
 423         if ((stacr & EMAC_STACR_OC) == 0) {
 424                 printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
 425                 return -1;
 426         }
 427
 428         /* Check for a read error */
 429         if (stacr & EMAC_STACR_PHYE) {
 430                 MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
 431                 return -1;
 432         }
 433
 434         MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
 435
 436         return (stacr >> 16);
 437 }
 438
 439 void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
 440 {
 441         int count;
 442         uint32_t stacr;
 443         struct ocp_enet_private *fep = dev->priv;
 444         emac_t *emacp = fep->emacp;
 445
 446         MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
 447                     dev->name, mii_id, reg, data));
 448
 449         /* Enable proper ZMII port */
 450         if (fep->zmii_dev)
 451                 emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
 452
 453         /* Use the EMAC that has the MDIO port */
 454         if (fep->mdio_dev) {
 455                 dev = fep->mdio_dev;
 456                 fep = dev->priv;
 457                 emacp = fep->emacp;
 458         }
 459
 460         count = 0;
 461         while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
 462                                         && (count++ < MDIO_DELAY))
 463                 udelay(1);
 464         MDIO_DEBUG((" (count was %d)\n", count));
 465
 466         if ((stacr & EMAC_STACR_OC) == 0) {
 467                 printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
 468                 return;
 469         }
 470
 471         /* Clear the speed bits and make a read request to the PHY */
 472
 473         stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
 474         stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
 475
 476         out_be32(&emacp->em0stacr, stacr);
 477
 478         count = 0;
 479         while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
 480                                         && (count++ < MDIO_DELAY))
 481                 udelay(1);
 482         MDIO_DEBUG((" (count was %d)\n", count));
 483
 484         if ((stacr & EMAC_STACR_OC) == 0)
 485                 printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
 486
 487         /* Check for a write error */
 488         if ((stacr & EMAC_STACR_PHYE) != 0) {
 489                 MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
 490         }
 491 }
 492
 493 static void emac_txeob_dev(void *param, u32 chanmask)
 494 {
 495         struct net_device *dev = param;
 496         struct ocp_enet_private *fep = dev->priv;
 497         unsigned long flags;
 498
 499         spin_lock_irqsave(&fep->lock, flags);
 500
 501         PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
 502
 503         while (fep->tx_cnt &&
 504                !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
 505
 506                 if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
 507                         /* Tell the system the transmit completed. */
 508                         dma_unmap_single(&fep->ocpdev->dev,
 509                                          fep->tx_desc[fep->ack_slot].data_ptr,
 510                                          fep->tx_desc[fep->ack_slot].data_len,
 511                                          DMA_TO_DEVICE);
 512                         dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
 513
 514                         if (fep->tx_desc[fep->ack_slot].ctrl &
 515                             (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
 516                                 fep->stats.collisions++;
 517                 }
 518
 519                 fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
 520                 if (++fep->ack_slot == NUM_TX_BUFF)
 521                         fep->ack_slot = 0;
 522
 523                 fep->tx_cnt--;
 524         }
 525         if (fep->tx_cnt < NUM_TX_BUFF)
 526                 netif_wake_queue(dev);
 527
 528         PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
 529
 530         spin_unlock_irqrestore(&fep->lock, flags);
 531 }
 532
 533 /*
 534   Fill/Re-fill the rx chain with valid ctrl/ptrs.
 535   This function will fill from rx_slot up to the parm end.
 536   So to completely fill the chain pre-set rx_slot to 0 and
 537   pass in an end of 0.
 538  */
 539 static void emac_rx_fill(struct net_device *dev, int end)
 540 {
 541         int i;
 542         struct ocp_enet_private *fep = dev->priv;
 543
 544         i = fep->rx_slot;
 545         do {
 546                 /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
 547                  * it breaks our cache line alignement. However, we still allocate
 548                  * +16 so that we end up allocating the exact same size as
 549                  * dev_alloc_skb() would do.
 550                  * Also, because of the skb_res, the max DMA size we give to EMAC
 551                  * is slighly wrong, causing it to potentially DMA 2 more bytes
 552                  * from a broken/oversized packet. These 16 bytes will take care
 553                  * that we don't walk on somebody else toes with that.
 554                  */
 555                 fep->rx_skb[i] =
 556                     alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
 557
 558                 if (fep->rx_skb[i] == NULL) {
 559                         /* Keep rx_slot here, the next time clean/fill is called
 560                          * we will try again before the MAL wraps back here
 561                          * If the MAL tries to use this descriptor with
 562                          * the EMPTY bit off it will cause the
 563                          * rxde interrupt.  That is where we will
 564                          * try again to allocate an sk_buff.
 565                          */
 566                         break;
 567
 568                 }
 569
 570                 if (skb_res)
 571                         skb_reserve(fep->rx_skb[i], skb_res);
 572
 573                 /* We must NOT dma_map_single the cache line right after the
 574                  * buffer, so we must crop our sync size to account for the
 575                  * reserved space
 576                  */
 577                 fep->rx_desc[i].data_ptr =
 578                     (unsigned char *)dma_map_single(&fep->ocpdev->dev,
 579                                                     (void *)fep->rx_skb[i]->
 580                                                     data,
 581                                                     fep->rx_buffer_size -
 582                                                     skb_res, DMA_FROM_DEVICE);
 583
 584                 /*
 585                  * Some 4xx implementations use the previously
 586                  * reserved bits in data_len to encode the MS
 587                  * 4-bits of a 36-bit physical address (ERPN)
 588                  * This must be initialized.
 589                  */
 590                 fep->rx_desc[i].data_len = 0;
 591                 fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
 592                     (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
 593
 594         } while ((i = (i + 1) % NUM_RX_BUFF) != end);
 595
 596         fep->rx_slot = i;
 597 }
 598
 599 static void
 600 emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
 601 {
 602         struct ocp_enet_private *fep = dev->priv;
 603
 604         /* Exit if interface has no TAH engine */
 605         if (!fep->tah_dev) {
 606                 skb->ip_summed = CHECKSUM_NONE;
 607                 return;
 608         }
 609
 610         /* Check for TCP/UDP/IP csum error */
 611         if (ctrl & EMAC_CSUM_VER_ERROR) {
 612                 /* Let the stack verify checksum errors */
 613                 skb->ip_summed = CHECKSUM_NONE;
 614 /*              adapter->hw_csum_err++; */
 615         } else {
 616                 /* Csum is good */
 617                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 618 /*              adapter->hw_csum_good++; */
 619         }
 620 }
 621
 622 static int emac_rx_clean(struct net_device *dev)
 623 {
 624         int i, b, bnum = 0, buf[6];
 625         int error, frame_length;
 626         struct ocp_enet_private *fep = dev->priv;
 627         unsigned short ctrl;
 628
 629         i = fep->rx_slot;
 630
 631         PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
 632
 633         do {
 634                 if (fep->rx_skb[i] == NULL)
 635                         continue;       /*we have already handled the packet but haved failed to alloc */
 636                 /*
 637                    since rx_desc is in uncached mem we don't keep reading it directly
 638                    we pull out a local copy of ctrl and do the checks on the copy.
 639                  */
 640                 ctrl = fep->rx_desc[i].ctrl;
 641                 if (ctrl & MAL_RX_CTRL_EMPTY)
 642                         break;  /*we don't have any more ready packets */
 643
 644                 if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
 645                         fep->stats.rx_errors++;
 646                         fep->stats.rx_dropped++;
 647
 648                         if (ctrl & EMAC_RX_ST_OE)
 649                                 fep->stats.rx_fifo_errors++;
 650                         if (ctrl & EMAC_RX_ST_AE)
 651                                 fep->stats.rx_frame_errors++;
 652                         if (ctrl & EMAC_RX_ST_BFCS)
 653                                 fep->stats.rx_crc_errors++;
 654                         if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
 655                                     EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
 656                                 fep->stats.rx_length_errors++;
 657                 } else {
 658                         if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
 659                             (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
 660                                 /* Single descriptor packet */
 661                                 emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
 662                                 /* Send the skb up the chain. */
 663                                 frame_length = fep->rx_desc[i].data_len - 4;
 664                                 skb_put(fep->rx_skb[i], frame_length);
 665                                 fep->rx_skb[i]->dev = dev;
 666                                 fep->rx_skb[i]->protocol =
 667                                     eth_type_trans(fep->rx_skb[i], dev);
 668                                 error = netif_rx(fep->rx_skb[i]);
 669
 670                                 if ((error == NET_RX_DROP) ||
 671                                     (error == NET_RX_BAD)) {
 672                                         fep->stats.rx_dropped++;
 673                                 } else {
 674                                         fep->stats.rx_packets++;
 675                                         fep->stats.rx_bytes += frame_length;
 676                                 }
 677                                 fep->rx_skb[i] = NULL;
 678                         } else {
 679                                 /* Multiple descriptor packet */
 680                                 if (ctrl & MAL_RX_CTRL_FIRST) {
 681                                         if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
 682                                             ctrl & MAL_RX_CTRL_EMPTY)
 683                                                 break;
 684                                         bnum = 0;
 685                                         buf[bnum] = i;
 686                                         ++bnum;
 687                                         continue;
 688                                 }
 689                                 if (((ctrl & MAL_RX_CTRL_FIRST) !=
 690                                      MAL_RX_CTRL_FIRST) &&
 691                                     ((ctrl & MAL_RX_CTRL_LAST) !=
 692                                      MAL_RX_CTRL_LAST)) {
 693                                         if (fep->rx_desc[(i + 1) %
 694                                                          NUM_RX_BUFF].ctrl &
 695                                             MAL_RX_CTRL_EMPTY) {
 696                                                 i = buf[0];
 697                                                 break;
 698                                         }
 699                                         buf[bnum] = i;
 700                                         ++bnum;
 701                                         continue;
 702                                 }
 703                                 if (ctrl & MAL_RX_CTRL_LAST) {
 704                                         buf[bnum] = i;
 705                                         ++bnum;
 706                                         skb_put(fep->rx_skb[buf[0]],
 707                                                 fep->rx_desc[buf[0]].data_len);
 708                                         for (b = 1; b < bnum; b++) {
 709                                                 /*
 710                                                  * MAL is braindead, we need
 711                                                  * to copy the remainder
 712                                                  * of the packet from the
 713                                                  * latter descriptor buffers
 714                                                  * to the first skb. Then
 715                                                  * dispose of the source
 716                                                  * skbs.
 717                                                  *
 718                                                  * Once the stack is fixed
 719                                                  * to handle frags on most
 720                                                  * protocols we can generate
 721                                                  * a fragmented skb with
 722                                                  * no copies.
 723                                                  */
 724                                                 memcpy(fep->rx_skb[buf[0]]->
 725                                                        data +
 726                                                        fep->rx_skb[buf[0]]->len,
 727                                                        fep->rx_skb[buf[b]]->
 728                                                        data,
 729                                                        fep->rx_desc[buf[b]].
 730                                                        data_len);
 731                                                 skb_put(fep->rx_skb[buf[0]],
 732                                                         fep->rx_desc[buf[b]].
 733                                                         data_len);
 734                                                 dma_unmap_single(&fep->ocpdev->
 735                                                                  dev,
 736                                                                  fep->
 737                                                                  rx_desc[buf
 738                                                                          [b]].
 739                                                                  data_ptr,
 740                                                                  fep->
 741                                                                  rx_desc[buf
 742                                                                          [b]].
 743                                                                  data_len,
 744                                                                  DMA_FROM_DEVICE);
 745                                                 dev_kfree_skb(fep->
 746                                                               rx_skb[buf[b]]);
 747                                         }
 748                                         emac_rx_csum(dev, ctrl,
 749                                                      fep->rx_skb[buf[0]]);
 750
 751                                         fep->rx_skb[buf[0]]->dev = dev;
 752                                         fep->rx_skb[buf[0]]->protocol =
 753                                             eth_type_trans(fep->rx_skb[buf[0]],
 754                                                            dev);
 755                                         error = netif_rx(fep->rx_skb[buf[0]]);
 756
 757                                         if ((error == NET_RX_DROP)
 758                                             || (error == NET_RX_BAD)) {
 759                                                 fep->stats.rx_dropped++;
 760                                         } else {
 761                                                 fep->stats.rx_packets++;
 762                                                 fep->stats.rx_bytes +=
 763                                                     fep->rx_skb[buf[0]]->len;
 764                                         }
 765                                         for (b = 0; b < bnum; b++)
 766                                                 fep->rx_skb[buf[b]] = NULL;
 767                                 }
 768                         }
 769                 }
 770         } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
 771
 772         PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
 773
 774         return i;
 775 }
 776
 777 static void emac_rxeob_dev(void *param, u32 chanmask)
 778 {
 779         struct net_device *dev = param;
 780         struct ocp_enet_private *fep = dev->priv;
 781         unsigned long flags;
 782         int n;
 783
 784         spin_lock_irqsave(&fep->lock, flags);
 785         if ((n = emac_rx_clean(dev)) != fep->rx_slot)
 786                 emac_rx_fill(dev, n);
 787         spin_unlock_irqrestore(&fep->lock, flags);
 788 }
 789
 790 /*
 791  * This interrupt should never occurr, we don't program
 792  * the MAL for contiunous mode.
 793  */
 794 static void emac_txde_dev(void *param, u32 chanmask)
 795 {
 796         struct net_device *dev = param;
 797         struct ocp_enet_private *fep = dev->priv;
 798
 799         printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
 800
 801         emac_mac_dump(dev);
 802         emac_mal_dump(dev);
 803
 804         /* Reenable the transmit channel */
 805         mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
 806 }
 807
 808 /*
 809  * This interrupt should be very rare at best.  This occurs when
 810  * the hardware has a problem with the receive descriptors.  The manual
 811  * states that it occurs when the hardware cannot the receive descriptor
 812  * empty bit is not set.  The recovery mechanism will be to
 813  * traverse through the descriptors, handle any that are marked to be
 814  * handled and reinitialize each along the way.  At that point the driver
 815  * will be restarted.
 816  */
 817 static void emac_rxde_dev(void *param, u32 chanmask)
 818 {
 819         struct net_device *dev = param;
 820         struct ocp_enet_private *fep = dev->priv;
 821         unsigned long flags;
 822
 823         if (net_ratelimit()) {
 824                 printk(KERN_WARNING "%s: receive descriptor error\n",
 825                        fep->ndev->name);
 826
 827                 emac_mac_dump(dev);
 828                 emac_mal_dump(dev);
 829                 emac_desc_dump(dev);
 830         }
 831
 832         /* Disable RX channel */
 833         spin_lock_irqsave(&fep->lock, flags);
 834         mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
 835
 836         /* For now, charge the error against all emacs */
 837         fep->stats.rx_errors++;
 838
 839         /* so do we have any good packets still? */
 840         emac_rx_clean(dev);
 841
 842         /* When the interface is restarted it resets processing to the
 843          *  first descriptor in the table.
 844          */
 845
 846         fep->rx_slot = 0;
 847         emac_rx_fill(dev, 0);
 848
 849         set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
 850         set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
 851
 852         /* Reenable the receive channels */
 853         mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
 854         spin_unlock_irqrestore(&fep->lock, flags);
 855 }
 856
 857 static irqreturn_t
 858 emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
 859 {
 860         struct net_device *dev = dev_instance;
 861         struct ocp_enet_private *fep = dev->priv;
 862         emac_t *emacp = fep->emacp;
 863         unsigned long tmp_em0isr;
 864
 865         /* EMAC interrupt */
 866         tmp_em0isr = in_be32(&emacp->em0isr);
 867         if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
 868                 /* This error is a hard transmit error - could retransmit */
 869                 fep->stats.tx_errors++;
 870
 871                 /* Reenable the transmit channel */
 872                 mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
 873
 874         } else {
 875                 fep->stats.rx_errors++;
 876         }
 877
 878         if (tmp_em0isr & EMAC_ISR_RP)
 879                 fep->stats.rx_length_errors++;
 880         if (tmp_em0isr & EMAC_ISR_ALE)
 881                 fep->stats.rx_frame_errors++;
 882         if (tmp_em0isr & EMAC_ISR_BFCS)
 883                 fep->stats.rx_crc_errors++;
 884         if (tmp_em0isr & EMAC_ISR_PTLE)
 885                 fep->stats.rx_length_errors++;
 886         if (tmp_em0isr & EMAC_ISR_ORE)
 887                 fep->stats.rx_length_errors++;
 888         if (tmp_em0isr & EMAC_ISR_TE0)
 889                 fep->stats.tx_aborted_errors++;
 890
 891         emac_err_dump(dev, tmp_em0isr);
 892
 893         out_be32(&emacp->em0isr, tmp_em0isr);
 894
 895         return IRQ_HANDLED;
 896 }
 897
 898 static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 899 {
 900         unsigned short ctrl;
 901         unsigned long flags;
 902         struct ocp_enet_private *fep = dev->priv;
 903         emac_t *emacp = fep->emacp;
 904         int len = skb->len;
 905         unsigned int offset = 0, size, f, tx_slot_first;
 906         unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
 907
 908         spin_lock_irqsave(&fep->lock, flags);
 909
 910         len -= skb->data_len;
 911
 912         if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
 913                 PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
 914                 netif_stop_queue(dev);
 915                 spin_unlock_irqrestore(&fep->lock, flags);
 916                 return -EBUSY;
 917         }
 918
 919         tx_slot_first = fep->tx_slot;
 920
 921         while (len) {
 922                 size = min(len, DESC_BUF_SIZE);
 923
 924                 fep->tx_desc[fep->tx_slot].data_len = (short)size;
 925                 fep->tx_desc[fep->tx_slot].data_ptr =
 926                     (unsigned char *)dma_map_single(&fep->ocpdev->dev,
 927                                                     (void *)((unsigned int)skb->
 928                                                              data + offset),
 929                                                     size, DMA_TO_DEVICE);
 930
 931                 ctrl = EMAC_TX_CTRL_DFLT;
 932                 if (fep->tx_slot != tx_slot_first)
 933                         ctrl |= MAL_TX_CTRL_READY;
 934                 if ((NUM_TX_BUFF - 1) == fep->tx_slot)
 935                         ctrl |= MAL_TX_CTRL_WRAP;
 936                 if (!nr_frags && (len == size)) {
 937                         ctrl |= MAL_TX_CTRL_LAST;
 938                         fep->tx_skb[fep->tx_slot] = skb;
 939                 }
 940                 if (skb->ip_summed == CHECKSUM_HW)
 941                         ctrl |= EMAC_TX_CTRL_TAH_CSUM;
 942
 943                 fep->tx_desc[fep->tx_slot].ctrl = ctrl;
 944
 945                 len -= size;
 946                 offset += size;
 947
 948                 /* Bump tx count */
 949                 if (++fep->tx_cnt == NUM_TX_BUFF)
 950                         netif_stop_queue(dev);
 951
 952                 /* Next descriptor */
 953                 if (++fep->tx_slot == NUM_TX_BUFF)
 954                         fep->tx_slot = 0;
 955         }
 956
 957         for (f = 0; f < nr_frags; f++) {
 958                 struct skb_frag_struct *frag;
 959
 960                 frag = &skb_shinfo(skb)->frags[f];
 961                 len = frag->size;
 962                 offset = 0;
 963
 964                 while (len) {
 965                         size = min(len, DESC_BUF_SIZE);
 966
 967                         dma_map_page(&fep->ocpdev->dev,
 968                                      frag->page,
 969                                      frag->page_offset + offset,
 970                                      size, DMA_TO_DEVICE);
 971
 972                         ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
 973                         if ((NUM_TX_BUFF - 1) == fep->tx_slot)
 974                                 ctrl |= MAL_TX_CTRL_WRAP;
 975                         if ((f == (nr_frags - 1)) && (len == size)) {
 976                                 ctrl |= MAL_TX_CTRL_LAST;
 977                                 fep->tx_skb[fep->tx_slot] = skb;
 978                         }
 979
 980                         if (skb->ip_summed == CHECKSUM_HW)
 981                                 ctrl |= EMAC_TX_CTRL_TAH_CSUM;
 982
 983                         fep->tx_desc[fep->tx_slot].data_len = (short)size;
 984                         fep->tx_desc[fep->tx_slot].data_ptr =
 985                             (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
 986                                      frag->page_offset + offset);
 987                         fep->tx_desc[fep->tx_slot].ctrl = ctrl;
 988
 989                         len -= size;
 990                         offset += size;
 991
 992                         /* Bump tx count */
 993                         if (++fep->tx_cnt == NUM_TX_BUFF)
 994                                 netif_stop_queue(dev);
 995
 996                         /* Next descriptor */
 997                         if (++fep->tx_slot == NUM_TX_BUFF)
 998                                 fep->tx_slot = 0;
 999                 }
1000         }
1001
1002         /*
1003          * Deferred set READY on first descriptor of packet to
1004          * avoid TX MAL race.
1005          */
1006         fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
1007
1008         /* Send the packet out. */
1009         out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
1010
1011         fep->stats.tx_packets++;
1012         fep->stats.tx_bytes += skb->len;
1013
1014         PKT_DEBUG(("emac_start_xmit() exitn"));
1015
1016         spin_unlock_irqrestore(&fep->lock, flags);
1017
1018         return 0;
1019 }
1020
1021 static int emac_adjust_to_link(struct ocp_enet_private *fep)
1022 {
1023         emac_t *emacp = fep->emacp;
1024         unsigned long mode_reg;
1025         int full_duplex, speed;
1026
1027         full_duplex = 0;
1028         speed = SPEED_10;
1029
1030         /* set mode register 1 defaults */
1031         mode_reg = EMAC_M1_DEFAULT;
1032
1033         /* Read link mode on PHY */
1034         if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
1035                 /* If an error occurred, we don't deal with it yet */
1036                 full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
1037                 speed = fep->phy_mii.speed;
1038         }
1039
1040
1041         /* set speed (default is 10Mb) */
1042         switch (speed) {
1043         case SPEED_1000:
1044                 mode_reg |= EMAC_M1_RFS_16K;
1045                 if (fep->rgmii_dev) {
1046                         struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev);
1047
1048                         if ((rgmii->mode[fep->rgmii_input] == RTBI)
1049                             || (rgmii->mode[fep->rgmii_input] == TBI))
1050                                 mode_reg |= EMAC_M1_MF_1000GPCS;
1051                         else
1052                                 mode_reg |= EMAC_M1_MF_1000MBPS;
1053
1054                         emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
1055                                               1000);
1056                 }
1057                 break;
1058         case SPEED_100:
1059                 mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
1060                 if (fep->rgmii_dev)
1061                         emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
1062                                               100);
1063                 if (fep->zmii_dev)
1064                         emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
1065                                              100);
1066                 break;
1067         case SPEED_10:
1068         default:
1069                 mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
1070                 if (fep->rgmii_dev)
1071                         emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
1072                                               10);
1073                 if (fep->zmii_dev)
1074                         emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
1075                                              10);
1076         }
1077
1078         if (full_duplex)
1079                 mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
1080         else
1081                 mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
1082
1083         LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
1084                     fep->ndev->name, speed, full_duplex, fep->opened));
1085
1086         printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
1087                fep->ndev->name, speed, full_duplex ? "Full" : "Half");
1088         if (fep->opened)
1089                 out_be32(&emacp->em0mr1, mode_reg);
1090
1091         return 0;
1092 }
1093
1094 static int emac_set_mac_address(struct net_device *ndev, void *p)
1095 {
1096         struct ocp_enet_private *fep = ndev->priv;
1097         emac_t *emacp = fep->emacp;
1098         struct sockaddr *addr = p;
1099
1100         if (!is_valid_ether_addr(addr->sa_data))
1101                 return -EADDRNOTAVAIL;
1102
1103         memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
1104
1105         /* set the high address */
1106         out_be32(&emacp->em0iahr,
1107                  (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
1108
1109         /* set the low address */
1110         out_be32(&emacp->em0ialr,
1111                  (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
1112                  | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
1113
1114         return 0;
1115 }
1116
1117 static int emac_change_mtu(struct net_device *dev, int new_mtu)
1118 {
1119         struct ocp_enet_private *fep = dev->priv;
1120         int old_mtu = dev->mtu;
1121         unsigned long mode_reg;
1122         emac_t *emacp = fep->emacp;
1123         u32 em0mr0;
1124         int i, full;
1125         unsigned long flags;
1126
1127         if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
1128                 printk(KERN_ERR
1129                        "emac: Invalid MTU setting, MTU must be between %d and %d\n",
1130                        EMAC_MIN_MTU, EMAC_MAX_MTU);
1131                 return -EINVAL;
1132         }
1133
1134         if (old_mtu != new_mtu && netif_running(dev)) {
1135                 /* Stop rx engine */
1136                 em0mr0 = in_be32(&emacp->em0mr0);
1137                 out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
1138
1139                 /* Wait for descriptors to be empty */
1140                 do {
1141                         full = 0;
1142                         for (i = 0; i < NUM_RX_BUFF; i++)
1143                                 if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
1144                                         printk(KERN_NOTICE
1145                                                "emac: RX ring is still full\n");
1146                                         full = 1;
1147                                 }
1148                 } while (full);
1149
1150                 spin_lock_irqsave(&fep->lock, flags);
1151
1152                 mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
1153
1154                 /* Destroy all old rx skbs */
1155                 for (i = 0; i < NUM_RX_BUFF; i++) {
1156                         dma_unmap_single(&fep->ocpdev->dev,
1157                                          fep->rx_desc[i].data_ptr,
1158                                          fep->rx_desc[i].data_len,
1159                                          DMA_FROM_DEVICE);
1160                         dev_kfree_skb(fep->rx_skb[i]);
1161                         fep->rx_skb[i] = NULL;
1162                 }
1163
1164                 /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */
1165                 mode_reg = in_be32(&emacp->em0mr1);
1166                 if (new_mtu > ENET_DEF_MTU_SIZE) {
1167                         mode_reg |= EMAC_M1_JUMBO_ENABLE;
1168                         fep->rx_buffer_size = EMAC_MAX_FRAME;
1169                 } else {
1170                         mode_reg &= ~EMAC_M1_JUMBO_ENABLE;
1171                         fep->rx_buffer_size = ENET_DEF_BUF_SIZE;
1172                 }
1173                 dev->mtu = new_mtu;
1174                 out_be32(&emacp->em0mr1, mode_reg);
1175
1176                 /* Re-init rx skbs */
1177                 fep->rx_slot = 0;
1178                 emac_rx_fill(dev, 0);
1179
1180                 /* Restart the rx engine */
1181                 mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
1182                 out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
1183
1184                 spin_unlock_irqrestore(&fep->lock, flags);
1185         }
1186
1187         return 0;
1188 }
1189
1190 static void __emac_set_multicast_list(struct net_device *dev)
1191 {
1192         struct ocp_enet_private *fep = dev->priv;
1193         emac_t *emacp = fep->emacp;
1194         u32 rmr = in_be32(&emacp->em0rmr);
1195
1196         /* First clear all special bits, they can be set later */
1197         rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
1198
1199         if (dev->flags & IFF_PROMISC) {
1200                 rmr |= EMAC_RMR_PME;
1201         } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
1202                 /*
1203                  * Must be setting up to use multicast
1204                  * Now check for promiscuous multicast
1205                  */
1206                 rmr |= EMAC_RMR_PMME;
1207         } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
1208                 unsigned short em0gaht[4] = { 0, 0, 0, 0 };
1209                 struct dev_mc_list *dmi;
1210
1211                 /* Need to hash on the multicast address. */
1212                 for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
1213                         unsigned long mc_crc;
1214                         unsigned int bit_number;
1215
1216                         mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
1217                         bit_number = 63 - (mc_crc >> 26);       /* MSB: 0 LSB: 63 */
1218                         em0gaht[bit_number >> 4] |=
1219                             0x8000 >> (bit_number & 0x0f);
1220                 }
1221                 emacp->em0gaht1 = em0gaht[0];
1222                 emacp->em0gaht2 = em0gaht[1];
1223                 emacp->em0gaht3 = em0gaht[2];
1224                 emacp->em0gaht4 = em0gaht[3];
1225
1226                 /* Turn on multicast addressing */
1227                 rmr |= EMAC_RMR_MAE;
1228         }
1229         out_be32(&emacp->em0rmr, rmr);
1230 }
1231
1232 static int emac_init_tah(struct ocp_enet_private *fep)
1233 {
1234         tah_t *tahp;
1235
1236         /* Initialize TAH and enable checksum verification */
1237         tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
1238
1239         if (tahp == NULL) {
1240                 printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
1241                        fep->tah_dev->def->index);
1242
1243                 return -ENOMEM;
1244         }
1245
1246         out_be32(&tahp->tah_mr, TAH_MR_SR);
1247
1248         /* wait for reset to complete */
1249         while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
1250
1251         /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
1252         out_be32(&tahp->tah_mr,
1253                  TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
1254                  TAH_MR_DIG);
1255
1256         iounmap(&tahp);
1257
1258         return 0;
1259 }
1260
1261 static void emac_init_rings(struct net_device *dev)
1262 {
1263         struct ocp_enet_private *ep = dev->priv;
1264         int loop;
1265
1266         ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
1267                                                 (ep->mal_tx_chan *
1268                                                  MAL_DT_ALIGN));
1269         ep->rx_desc =
1270             (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
1271                                       (ep->mal_rx_chan * MAL_DT_ALIGN));
1272
1273         /* Fill in the transmit descriptor ring. */
1274         for (loop = 0; loop < NUM_TX_BUFF; loop++) {
1275                 if (ep->tx_skb[loop]) {
1276                         dma_unmap_single(&ep->ocpdev->dev,
1277                                          ep->tx_desc[loop].data_ptr,
1278                                          ep->tx_desc[loop].data_len,
1279                                          DMA_TO_DEVICE);
1280                         dev_kfree_skb_irq(ep->tx_skb[loop]);
1281                 }
1282                 ep->tx_skb[loop] = NULL;
1283                 ep->tx_desc[loop].ctrl = 0;
1284                 ep->tx_desc[loop].data_len = 0;
1285                 ep->tx_desc[loop].data_ptr = NULL;
1286         }
1287         ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
1288
1289         /* Format the receive descriptor ring. */
1290         ep->rx_slot = 0;
1291         /* Default is MTU=1500 + Ethernet overhead */
1292         ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
1293         emac_rx_fill(dev, 0);
1294         if (ep->rx_slot != 0) {
1295                 printk(KERN_ERR
1296                        "%s: Not enough mem for RxChain durning Open?\n",
1297                        dev->name);
1298                 /*We couldn't fill the ring at startup?
1299                  *We could clean up and fail to open but right now we will try to
1300                  *carry on. It may be a sign of a bad NUM_RX_BUFF value
1301                  */
1302         }
1303
1304         ep->tx_cnt = 0;
1305         ep->tx_slot = 0;
1306         ep->ack_slot = 0;
1307 }
1308
1309 static void emac_reset_configure(struct ocp_enet_private *fep)
1310 {
1311         emac_t *emacp = fep->emacp;
1312         int i;
1313
1314         mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
1315         mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
1316
1317         /*
1318          * Check for a link, some PHYs don't provide a clock if
1319          * no link is present.  Some EMACs will not come out of
1320          * soft reset without a PHY clock present.
1321          */
1322         if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
1323                 /* Reset the EMAC */
1324                 out_be32(&emacp->em0mr0, EMAC_M0_SRST);
1325                 udelay(20);
1326                 for (i = 0; i < 100; i++) {
1327                         if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
1328                                 break;
1329                         udelay(10);
1330                 }
1331
1332                 if (i >= 100) {
1333                         printk(KERN_ERR "%s: Cannot reset EMAC\n",
1334                                fep->ndev->name);
1335                         return;
1336                 }
1337         }
1338
1339         /* Switch IRQs off for now */
1340         out_be32(&emacp->em0iser, 0);
1341
1342         /* Configure MAL rx channel */
1343         mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
1344
1345         /* set the high address */
1346         out_be32(&emacp->em0iahr,
1347                  (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
1348
1349         /* set the low address */
1350         out_be32(&emacp->em0ialr,
1351                  (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
1352                  | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
1353
1354         /* Adjust to link */
1355         if (netif_carrier_ok(fep->ndev))
1356                 emac_adjust_to_link(fep);
1357
1358         /* enable broadcast/individual address and RX FIFO defaults */
1359         out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
1360
1361         /* set transmit request threshold register */
1362         out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
1363
1364         /* Reconfigure multicast */
1365         __emac_set_multicast_list(fep->ndev);
1366
1367         /* Set receiver/transmitter defaults */
1368         out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
1369         out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
1370         out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
1371
1372         /* set frame gap */
1373         out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
1374
1375         /* set VLAN Tag Protocol Identifier */
1376         out_be32(&emacp->em0vtpid, 0x8100);
1377
1378         /* Init ring buffers */
1379         emac_init_rings(fep->ndev);
1380 }
1381
1382 static void emac_kick(struct ocp_enet_private *fep)
1383 {
1384         emac_t *emacp = fep->emacp;
1385         unsigned long emac_ier;
1386
1387         emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
1388             EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
1389             EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
1390
1391         out_be32(&emacp->em0iser, emac_ier);
1392
1393         /* enable all MAL transmit and receive channels */
1394         mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
1395         mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
1396
1397         /* set transmit and receive enable */
1398         out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
1399 }
1400
1401 static void
1402 emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
1403 {
1404         u32 advertise;
1405         int autoneg;
1406         int forced_speed;
1407         int forced_duplex;
1408
1409         /* Default advertise */
1410         advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
1411             ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
1412             ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
1413         autoneg = fep->want_autoneg;
1414         forced_speed = fep->phy_mii.speed;
1415         forced_duplex = fep->phy_mii.duplex;
1416
1417         /* Setup link parameters */
1418         if (ep) {
1419                 if (ep->autoneg == AUTONEG_ENABLE) {
1420                         advertise = ep->advertising;
1421                         autoneg = 1;
1422                 } else {
1423                         autoneg = 0;
1424                         forced_speed = ep->speed;
1425                         forced_duplex = ep->duplex;
1426                 }
1427         }
1428
1429         /* Configure PHY & start aneg */
1430         fep->want_autoneg = autoneg;
1431         if (autoneg) {
1432                 LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
1433                             fep->ndev->name, advertise));
1434                 fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
1435         } else {
1436                 LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
1437                             fep->ndev->name, forced_speed, forced_duplex));
1438                 fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
1439                                                     forced_duplex);
1440         }
1441         fep->timer_ticks = 0;
1442         mod_timer(&fep->link_timer, jiffies + HZ);
1443 }
1444
1445 static void emac_link_timer(unsigned long data)
1446 {
1447         struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
1448         int link;
1449
1450         if (fep->going_away)
1451                 return;
1452
1453         spin_lock_irq(&fep->lock);
1454
1455         link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
1456         LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
1457
1458         if (link == netif_carrier_ok(fep->ndev)) {
1459                 if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
1460                         emac_start_link(fep, NULL);
1461                 goto out;
1462         }
1463         printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
1464                link ? "Up" : "Down");
1465         if (link) {
1466                 netif_carrier_on(fep->ndev);
1467                 /* Chip needs a full reset on config change. That sucks, so I
1468                  * should ultimately move that to some tasklet to limit
1469                  * latency peaks caused by this code
1470                  */
1471                 emac_reset_configure(fep);
1472                 if (fep->opened)
1473                         emac_kick(fep);
1474         } else {
1475                 fep->timer_ticks = 0;
1476                 netif_carrier_off(fep->ndev);
1477         }
1478       out:
1479         mod_timer(&fep->link_timer, jiffies + HZ);
1480         spin_unlock_irq(&fep->lock);
1481 }
1482
1483 static void emac_set_multicast_list(struct net_device *dev)
1484 {
1485         struct ocp_enet_private *fep = dev->priv;
1486
1487         spin_lock_irq(&fep->lock);
1488         __emac_set_multicast_list(dev);
1489         spin_unlock_irq(&fep->lock);
1490 }
1491
1492 static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
1493 {
1494         struct ocp_enet_private *fep = ndev->priv;
1495
1496         cmd->supported = fep->phy_mii.def->features;
1497         cmd->port = PORT_MII;
1498         cmd->transceiver = XCVR_EXTERNAL;
1499         cmd->phy_address = fep->mii_phy_addr;
1500         spin_lock_irq(&fep->lock);
1501         cmd->autoneg = fep->want_autoneg;
1502         cmd->speed = fep->phy_mii.speed;
1503         cmd->duplex = fep->phy_mii.duplex;
1504         spin_unlock_irq(&fep->lock);
1505         return 0;
1506 }
1507
1508 static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
1509 {
1510         struct ocp_enet_private *fep = ndev->priv;
1511         unsigned long features = fep->phy_mii.def->features;
1512
1513         if (!capable(CAP_NET_ADMIN))
1514                 return -EPERM;
1515
1516         if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
1517                 return -EINVAL;
1518         if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
1519                 return -EINVAL;
1520         if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
1521                 return -EINVAL;
1522         if (cmd->autoneg == AUTONEG_DISABLE)
1523                 switch (cmd->speed) {
1524                 case SPEED_10:
1525                         if (cmd->duplex == DUPLEX_HALF &&
1526                             (features & SUPPORTED_10baseT_Half) == 0)
1527                                 return -EINVAL;
1528                         if (cmd->duplex == DUPLEX_FULL &&
1529                             (features & SUPPORTED_10baseT_Full) == 0)
1530                                 return -EINVAL;
1531                         break;
1532                 case SPEED_100:
1533                         if (cmd->duplex == DUPLEX_HALF &&
1534                             (features & SUPPORTED_100baseT_Half) == 0)
1535                                 return -EINVAL;
1536                         if (cmd->duplex == DUPLEX_FULL &&
1537                             (features & SUPPORTED_100baseT_Full) == 0)
1538                                 return -EINVAL;
1539                         break;
1540                 case SPEED_1000:
1541                         if (cmd->duplex == DUPLEX_HALF &&
1542                             (features & SUPPORTED_1000baseT_Half) == 0)
1543                                 return -EINVAL;
1544                         if (cmd->duplex == DUPLEX_FULL &&
1545                             (features & SUPPORTED_1000baseT_Full) == 0)
1546                                 return -EINVAL;
1547                         break;
1548                 default:
1549                         return -EINVAL;
1550         } else if ((features & SUPPORTED_Autoneg) == 0)
1551                 return -EINVAL;
1552         spin_lock_irq(&fep->lock);
1553         emac_start_link(fep, cmd);
1554         spin_unlock_irq(&fep->lock);
1555         return 0;
1556 }
1557
1558 static void
1559 emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
1560 {
1561         struct ocp_enet_private *fep = ndev->priv;
1562
1563         strcpy(info->driver, DRV_NAME);
1564         strcpy(info->version, DRV_VERSION);
1565         info->fw_version[0] = '\0';
1566         sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
1567         info->regdump_len = 0;
1568 }
1569
1570 static int emac_nway_reset(struct net_device *ndev)
1571 {
1572         struct ocp_enet_private *fep = ndev->priv;
1573
1574         if (!fep->want_autoneg)
1575                 return -EINVAL;
1576         spin_lock_irq(&fep->lock);
1577         emac_start_link(fep, NULL);
1578         spin_unlock_irq(&fep->lock);
1579         return 0;
1580 }
1581
1582 static u32 emac_get_link(struct net_device *ndev)
1583 {
1584         return netif_carrier_ok(ndev);
1585 }
1586
1587 static struct ethtool_ops emac_ethtool_ops = {
1588         .get_settings = emac_get_settings,
1589         .set_settings = emac_set_settings,
1590         .get_drvinfo = emac_get_drvinfo,
1591         .nway_reset = emac_nway_reset,
1592         .get_link = emac_get_link
1593 };
1594
1595 static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1596 {
1597         struct ocp_enet_private *fep = dev->priv;
1598         uint16_t *data = (uint16_t *) & rq->ifr_ifru;
1599
1600         switch (cmd) {
1601         case SIOCGMIIPHY:
1602                 data[0] = fep->mii_phy_addr;
1603                 /* Fall through */
1604         case SIOCGMIIREG:
1605                 data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
1606                 return 0;
1607         case SIOCSMIIREG:
1608                 if (!capable(CAP_NET_ADMIN))
1609                         return -EPERM;
1610
1611                 emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
1612                 return 0;
1613         default:
1614                 return -EOPNOTSUPP;
1615         }
1616 }
1617
1618 static int emac_open(struct net_device *dev)
1619 {
1620         struct ocp_enet_private *fep = dev->priv;
1621         int rc;
1622
1623         spin_lock_irq(&fep->lock);
1624
1625         fep->opened = 1;
1626         netif_carrier_off(dev);
1627
1628         /* Reset & configure the chip */
1629         emac_reset_configure(fep);
1630
1631         spin_unlock_irq(&fep->lock);
1632
1633         /* Request our interrupt lines */
1634         rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
1635         if (rc != 0) {
1636                 printk("dev->irq %d failed\n", dev->irq);
1637                 goto bail;
1638         }
1639         /* Kick the chip rx & tx channels into life */
1640         spin_lock_irq(&fep->lock);
1641         emac_kick(fep);
1642         spin_unlock_irq(&fep->lock);
1643
1644         netif_start_queue(dev);
1645       bail:
1646         return rc;
1647 }
1648
1649 static int emac_close(struct net_device *dev)
1650 {
1651         struct ocp_enet_private *fep = dev->priv;
1652         emac_t *emacp = fep->emacp;
1653
1654         /* XXX Stop IRQ emitting here */
1655         spin_lock_irq(&fep->lock);
1656         fep->opened = 0;
1657         mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
1658         mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
1659         netif_carrier_off(dev);
1660         netif_stop_queue(dev);
1661
1662         /*
1663          * Check for a link, some PHYs don't provide a clock if
1664          * no link is present.  Some EMACs will not come out of
1665          * soft reset without a PHY clock present.
1666          */
1667         if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
1668                 out_be32(&emacp->em0mr0, EMAC_M0_SRST);
1669                 udelay(10);
1670
1671                 if (emacp->em0mr0 & EMAC_M0_SRST) {
1672                         /*not sure what to do here hopefully it clears before another open */
1673                         printk(KERN_ERR
1674                                "%s: Phy SoftReset didn't clear, no link?\n",
1675                                dev->name);
1676                 }
1677         }
1678
1679         /* Free the irq's */
1680         free_irq(dev->irq, dev);
1681
1682         spin_unlock_irq(&fep->lock);
1683
1684         return 0;
1685 }
1686
1687 static void emac_remove(struct ocp_device *ocpdev)
1688 {
1689         struct net_device *dev = ocp_get_drvdata(ocpdev);
1690         struct ocp_enet_private *ep = dev->priv;
1691
1692         /* FIXME: locking, races, ... */
1693         ep->going_away = 1;
1694         ocp_set_drvdata(ocpdev, NULL);
1695         if (ep->rgmii_dev)
1696                 emac_close_rgmii(ep->rgmii_dev);
1697         if (ep->zmii_dev)
1698                 emac_close_zmii(ep->zmii_dev);
1699
1700         unregister_netdev(dev);
1701         del_timer_sync(&ep->link_timer);
1702         mal_unregister_commac(ep->mal, &ep->commac);
1703         iounmap((void *)ep->emacp);
1704         kfree(dev);
1705 }
1706
1707 struct mal_commac_ops emac_commac_ops = {
1708         .txeob = &emac_txeob_dev,
1709         .txde = &emac_txde_dev,
1710         .rxeob = &emac_rxeob_dev,
1711         .rxde = &emac_rxde_dev,
1712 };
1713
1714 #ifdef CONFIG_NET_POLL_CONTROLLER
1715 static void emac_netpoll(struct net_device *ndev)
1716 {
1717         emac_rxeob_dev((void *)ndev, 0);
1718         emac_txeob_dev((void *)ndev, 0);
1719 }
1720 #endif
1721
1722 static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
1723 {
1724         int deferred_init = 0;
1725         int rc = 0, i;
1726         struct net_device *ndev;
1727         struct ocp_enet_private *ep;
1728         struct ocp_func_emac_data *emacdata;
1729         int commac_reg = 0;
1730         u32 phy_map;
1731
1732         emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
1733         if (!emacdata) {
1734                 printk(KERN_ERR "emac%d: Missing additional data!\n",
1735                        ocpdev->def->index);
1736                 return -ENODEV;
1737         }
1738
1739         /* Allocate our net_device structure */
1740         ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
1741         if (ndev == NULL) {
1742                 printk(KERN_ERR
1743                        "emac%d: Could not allocate ethernet device.\n",
1744                        ocpdev->def->index);
1745                 return -ENOMEM;
1746         }
1747         ep = ndev->priv;
1748         ep->ndev = ndev;
1749         ep->ocpdev = ocpdev;
1750         ndev->irq = ocpdev->def->irq;
1751         ep->wol_irq = emacdata->wol_irq;
1752         if (emacdata->mdio_idx >= 0) {
1753                 if (emacdata->mdio_idx == ocpdev->def->index) {
1754                         /* Set the common MDIO net_device */
1755                         mdio_ndev = ndev;
1756                         deferred_init = 1;
1757                 }
1758                 ep->mdio_dev = mdio_ndev;
1759         } else {
1760                 ep->mdio_dev = ndev;
1761         }
1762
1763         ocp_set_drvdata(ocpdev, ndev);
1764
1765         spin_lock_init(&ep->lock);
1766
1767         /* Fill out MAL informations and register commac */
1768         ep->mal = mal;
1769         ep->mal_tx_chan = emacdata->mal_tx_chan;
1770         ep->mal_rx_chan = emacdata->mal_rx_chan;
1771         ep->commac.ops = &emac_commac_ops;
1772         ep->commac.dev = ndev;
1773         ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
1774         ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
1775         rc = mal_register_commac(ep->mal, &ep->commac);
1776         if (rc != 0)
1777                 goto bail;
1778         commac_reg = 1;
1779
1780         /* Map our MMIOs */
1781         ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
1782
1783         /* Check if we need to attach to a ZMII */
1784         if (emacdata->zmii_idx >= 0) {
1785                 ep->zmii_input = emacdata->zmii_mux;
1786                 ep->zmii_dev =
1787                     ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
1788                                     emacdata->zmii_idx);
1789                 if (ep->zmii_dev == NULL)
1790                         printk(KERN_WARNING
1791                                "emac%d: ZMII %d requested but not found !\n",
1792                                ocpdev->def->index, emacdata->zmii_idx);
1793                 else if ((rc =
1794                           emac_init_zmii(ep->zmii_dev, ep->zmii_input,
1795                                          emacdata->phy_mode)) != 0)
1796                         goto bail;
1797         }
1798
1799         /* Check if we need to attach to a RGMII */
1800         if (emacdata->rgmii_idx >= 0) {
1801                 ep->rgmii_input = emacdata->rgmii_mux;
1802                 ep->rgmii_dev =
1803                     ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
1804                                     emacdata->rgmii_idx);
1805                 if (ep->rgmii_dev == NULL)
1806                         printk(KERN_WARNING
1807                                "emac%d: RGMII %d requested but not found !\n",
1808                                ocpdev->def->index, emacdata->rgmii_idx);
1809                 else if ((rc =
1810                           emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
1811                                           emacdata->phy_mode)) != 0)
1812                         goto bail;
1813         }
1814
1815         /* Check if we need to attach to a TAH */
1816         if (emacdata->tah_idx >= 0) {
1817                 ep->tah_dev =
1818                     ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
1819                                     emacdata->tah_idx);
1820                 if (ep->tah_dev == NULL)
1821                         printk(KERN_WARNING
1822                                "emac%d: TAH %d requested but not found !\n",
1823                                ocpdev->def->index, emacdata->tah_idx);
1824                 else if ((rc = emac_init_tah(ep)) != 0)
1825                         goto bail;
1826         }
1827
1828         if (deferred_init) {
1829                 if (!list_empty(&emac_init_list)) {
1830                         struct list_head *entry;
1831                         struct emac_def_dev *ddev;
1832
1833                         list_for_each(entry, &emac_init_list) {
1834                                 ddev =
1835                                     list_entry(entry, struct emac_def_dev,
1836                                                link);
1837                                 emac_init_device(ddev->ocpdev, ddev->mal);
1838                         }
1839                 }
1840         }
1841
1842         /* Init link monitoring timer */
1843         init_timer(&ep->link_timer);
1844         ep->link_timer.function = emac_link_timer;
1845         ep->link_timer.data = (unsigned long)ep;
1846         ep->timer_ticks = 0;
1847
1848         /* Fill up the mii_phy structure */
1849         ep->phy_mii.dev = ndev;
1850         ep->phy_mii.mdio_read = emac_phy_read;
1851         ep->phy_mii.mdio_write = emac_phy_write;
1852         ep->phy_mii.mode = emacdata->phy_mode;
1853
1854         /* Find PHY */
1855         phy_map = emacdata->phy_map | busy_phy_map;
1856         for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
1857                 if ((phy_map & 0x1) == 0) {
1858                         int val = emac_phy_read(ndev, i, MII_BMCR);
1859                         if (val != 0xffff && val != -1)
1860                                 break;
1861                 }
1862         }
1863         if (i == 0x20) {
1864                 printk(KERN_WARNING "emac%d: Can't find PHY.\n",
1865                        ocpdev->def->index);
1866                 rc = -ENODEV;
1867                 goto bail;
1868         }
1869         busy_phy_map |= 1 << i;
1870         ep->mii_phy_addr = i;
1871         rc = mii_phy_probe(&ep->phy_mii, i);
1872         if (rc) {
1873                 printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
1874                        ocpdev->def->index);
1875                 rc = -ENODEV;
1876                 goto bail;
1877         }
1878
1879         /* Setup initial PHY config & startup aneg */
1880         if (ep->phy_mii.def->ops->init)
1881                 ep->phy_mii.def->ops->init(&ep->phy_mii);
1882         netif_carrier_off(ndev);
1883         if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
1884                 ep->want_autoneg = 1;
1885         emac_start_link(ep, NULL);
1886
1887         /* read the MAC Address */
1888         for (i = 0; i < 6; i++)
1889                 ndev->dev_addr[i] = emacdata->mac_addr[i];
1890
1891         /* Fill in the driver function table */
1892         ndev->open = &emac_open;
1893         ndev->hard_start_xmit = &emac_start_xmit;
1894         ndev->stop = &emac_close;
1895         ndev->get_stats = &emac_stats;
1896         if (emacdata->jumbo)
1897                 ndev->change_mtu = &emac_change_mtu;
1898         ndev->set_mac_address = &emac_set_mac_address;
1899         ndev->set_multicast_list = &emac_set_multicast_list;
1900         ndev->do_ioctl = &emac_ioctl;
1901         SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
1902         if (emacdata->tah_idx >= 0)
1903                 ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
1904 #ifdef CONFIG_NET_POLL_CONTROLLER
1905         ndev->poll_controller = emac_netpoll;
1906 #endif
1907
1908         SET_MODULE_OWNER(ndev);
1909
1910         rc = register_netdev(ndev);
1911         if (rc != 0)
1912                 goto bail;
1913
1914         printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
1915                ndev->name,
1916                ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
1917                ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
1918         printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
1919                ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
1920
1921       bail:
1922         if (rc && commac_reg)
1923                 mal_unregister_commac(ep->mal, &ep->commac);
1924         if (rc && ndev)
1925                 kfree(ndev);
1926
1927         return rc;
1928 }
1929
1930 static int emac_probe(struct ocp_device *ocpdev)
1931 {
1932         struct ocp_device *maldev;
1933         struct ibm_ocp_mal *mal;
1934         struct ocp_func_emac_data *emacdata;
1935
1936         emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
1937         if (emacdata == NULL) {
1938                 printk(KERN_ERR "emac%d: Missing additional datas !\n",
1939                        ocpdev->def->index);
1940                 return -ENODEV;
1941         }
1942
1943         /* Get the MAL device  */
1944         maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
1945         if (maldev == NULL) {
1946                 printk("No maldev\n");
1947                 return -ENODEV;
1948         }
1949         /*
1950          * Get MAL driver data, it must be here due to link order.
1951          * When the driver is modularized, symbol dependencies will
1952          * ensure the MAL driver is already present if built as a
1953          * module.
1954          */
1955         mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
1956         if (mal == NULL) {
1957                 printk("No maldrv\n");
1958                 return -ENODEV;
1959         }
1960
1961         /* If we depend on another EMAC for MDIO, wait for it to show up */
1962         if (emacdata->mdio_idx >= 0 &&
1963             (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
1964                 struct emac_def_dev *ddev;
1965                 /* Add this index to the deferred init table */
1966                 ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
1967                 ddev->ocpdev = ocpdev;
1968                 ddev->mal = mal;
1969                 list_add_tail(&ddev->link, &emac_init_list);
1970         } else {
1971                 emac_init_device(ocpdev, mal);
1972         }
1973
1974         return 0;
1975 }
1976
1977 /* Structure for a device driver */
1978 static struct ocp_device_id emac_ids[] = {
1979         {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
1980         {.vendor = OCP_VENDOR_INVALID}
1981 };
1982
1983 static struct ocp_driver emac_driver = {
1984         .name = "emac",
1985         .id_table = emac_ids,
1986
1987         .probe = emac_probe,
1988         .remove = emac_remove,
1989 };
1990
1991 static int __init emac_init(void)
1992 {
1993         printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
1994         printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
1995
1996         if (skb_res > 2) {
1997                 printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
1998                        skb_res);
1999                 skb_res = 2;
2000         }
2001
2002         return ocp_register_driver(&emac_driver);
2003 }
2004
2005 static void __exit emac_exit(void)
2006 {
2007         ocp_unregister_driver(&emac_driver);
2008 }
2009
2010 module_init(emac_init);
2011 module_exit(emac_exit);