Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[sfrench/cifs-2.6.git] / drivers / net / hamradio / yam.c
1 /*****************************************************************************/
2
3 /*
4  *    yam.c  -- YAM radio modem driver.
5  *
6  *      Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
7  *      Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License, or
12  *      (at your option) any later version.
13  *
14  *      This program is distributed in the hope that it will be useful,
15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *      GNU General Public License for more details.
18  *
19  *      You should have received a copy of the GNU General Public License
20  *      along with this program; if not, write to the Free Software
21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  *
23  *  Please note that the GPL allows you to use the driver, NOT the radio.
24  *  In order to use the radio, you need a license from the communications
25  *  authority of your country.
26  *
27  *
28  *  History:
29  *   0.0 F1OAT 06.06.98  Begin of work with baycom.c source code V 0.3
30  *   0.1 F1OAT 07.06.98  Add timer polling routine for channel arbitration
31  *   0.2 F6FBB 08.06.98  Added delay after FPGA programming
32  *   0.3 F6FBB 29.07.98  Delayed PTT implementation for dupmode=2
33  *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistence
34  *   0.5 F6FBB 01.08.98  Shared IRQs, /proc/net and network statistics
35  *   0.6 F6FBB 25.08.98  Added 1200Bds format
36  *   0.7 F6FBB 12.09.98  Added to the kernel configuration
37  *   0.8 F6FBB 14.10.98  Fixed slottime/persistence timing bug
38  *       OK1ZIA 2.09.01  Fixed "kfree_skb on hard IRQ" 
39  *                       using dev_kfree_skb_any(). (important in 2.4 kernel)
40  *   
41  */
42
43 /*****************************************************************************/
44
45 #include <linux/module.h>
46 #include <linux/types.h>
47 #include <linux/net.h>
48 #include <linux/in.h>
49 #include <linux/if.h>
50 #include <linux/slab.h>
51 #include <linux/errno.h>
52 #include <linux/bitops.h>
53 #include <linux/random.h>
54 #include <asm/io.h>
55 #include <linux/interrupt.h>
56 #include <linux/ioport.h>
57 #include <linux/firmware.h>
58 #include <linux/platform_device.h>
59
60 #include <linux/netdevice.h>
61 #include <linux/if_arp.h>
62 #include <linux/etherdevice.h>
63 #include <linux/skbuff.h>
64 #include <net/ax25.h>
65
66 #include <linux/kernel.h>
67 #include <linux/proc_fs.h>
68 #include <linux/seq_file.h>
69 #include <net/net_namespace.h>
70
71 #include <linux/uaccess.h>
72 #include <linux/init.h>
73
74 #include <linux/yam.h>
75
76 /* --------------------------------------------------------------------- */
77
78 static const char yam_drvname[] = "yam";
79 static const char yam_drvinfo[] __initconst = KERN_INFO \
80         "YAM driver version 0.8 by F1OAT/F6FBB\n";
81
82 /* --------------------------------------------------------------------- */
83
84 #define FIRMWARE_9600   "yam/9600.bin"
85 #define FIRMWARE_1200   "yam/1200.bin"
86
87 #define YAM_9600        1
88 #define YAM_1200        2
89
90 #define NR_PORTS        4
91 #define YAM_MAGIC       0xF10A7654
92
93 /* Transmitter states */
94
95 #define TX_OFF          0
96 #define TX_HEAD         1
97 #define TX_DATA         2
98 #define TX_CRC1         3
99 #define TX_CRC2         4
100 #define TX_TAIL         5
101
102 #define YAM_MAX_FRAME   1024
103
104 #define DEFAULT_BITRATE 9600                    /* bps */
105 #define DEFAULT_HOLDD   10                      /* sec */
106 #define DEFAULT_TXD     300                     /* ms */
107 #define DEFAULT_TXTAIL  10                      /* ms */
108 #define DEFAULT_SLOT    100                     /* ms */
109 #define DEFAULT_PERS    64                      /* 0->255 */
110
111 struct yam_port {
112         int magic;
113         int bitrate;
114         int baudrate;
115         int iobase;
116         int irq;
117         int dupmode;
118
119         struct net_device *dev;
120
121         int nb_rxint;
122         int nb_mdint;
123
124         /* Parameters section */
125
126         int txd;                                /* tx delay */
127         int holdd;                              /* duplex ptt delay */
128         int txtail;                             /* txtail delay */
129         int slot;                               /* slottime */
130         int pers;                               /* persistence */
131
132         /* Tx section */
133
134         int tx_state;
135         int tx_count;
136         int slotcnt;
137         unsigned char tx_buf[YAM_MAX_FRAME];
138         int tx_len;
139         int tx_crcl, tx_crch;
140         struct sk_buff_head send_queue;         /* Packets awaiting transmission */
141
142         /* Rx section */
143
144         int dcd;
145         unsigned char rx_buf[YAM_MAX_FRAME];
146         int rx_len;
147         int rx_crcl, rx_crch;
148 };
149
150 struct yam_mcs {
151         unsigned char bits[YAM_FPGA_SIZE];
152         int bitrate;
153         struct yam_mcs *next;
154 };
155
156 static struct net_device *yam_devs[NR_PORTS];
157
158 static struct yam_mcs *yam_data;
159
160 static DEFINE_TIMER(yam_timer, NULL);
161
162 /* --------------------------------------------------------------------- */
163
164 #define RBR(iobase)     (iobase+0)
165 #define THR(iobase)     (iobase+0)
166 #define IER(iobase)     (iobase+1)
167 #define IIR(iobase)     (iobase+2)
168 #define FCR(iobase)     (iobase+2)
169 #define LCR(iobase)     (iobase+3)
170 #define MCR(iobase)     (iobase+4)
171 #define LSR(iobase)     (iobase+5)
172 #define MSR(iobase)     (iobase+6)
173 #define SCR(iobase)     (iobase+7)
174 #define DLL(iobase)     (iobase+0)
175 #define DLM(iobase)     (iobase+1)
176
177 #define YAM_EXTENT      8
178
179 /* Interrupt Identification Register Bit Masks */
180 #define IIR_NOPEND      1
181 #define IIR_MSR         0
182 #define IIR_TX          2
183 #define IIR_RX          4
184 #define IIR_LSR         6
185 #define IIR_TIMEOUT     12                      /* Fifo mode only */
186
187 #define IIR_MASK        0x0F
188
189 /* Interrupt Enable Register Bit Masks */
190 #define IER_RX          1                       /* enable rx interrupt */
191 #define IER_TX          2                       /* enable tx interrupt */
192 #define IER_LSR         4                       /* enable line status interrupts */
193 #define IER_MSR         8                       /* enable modem status interrupts */
194
195 /* Modem Control Register Bit Masks */
196 #define MCR_DTR         0x01                    /* DTR output */
197 #define MCR_RTS         0x02                    /* RTS output */
198 #define MCR_OUT1        0x04                    /* OUT1 output (not accessible in RS232) */
199 #define MCR_OUT2        0x08                    /* Master Interrupt enable (must be set on PCs) */
200 #define MCR_LOOP        0x10                    /* Loopback enable */
201
202 /* Modem Status Register Bit Masks */
203 #define MSR_DCTS        0x01                    /* Delta CTS input */
204 #define MSR_DDSR        0x02                    /* Delta DSR */
205 #define MSR_DRIN        0x04                    /* Delta RI */
206 #define MSR_DDCD        0x08                    /* Delta DCD */
207 #define MSR_CTS         0x10                    /* CTS input */
208 #define MSR_DSR         0x20                    /* DSR input */
209 #define MSR_RING        0x40                    /* RI  input */
210 #define MSR_DCD         0x80                    /* DCD input */
211
212 /* line status register bit mask */
213 #define LSR_RXC         0x01
214 #define LSR_OE          0x02
215 #define LSR_PE          0x04
216 #define LSR_FE          0x08
217 #define LSR_BREAK       0x10
218 #define LSR_THRE        0x20
219 #define LSR_TSRE        0x40
220
221 /* Line Control Register Bit Masks */
222 #define LCR_DLAB        0x80
223 #define LCR_BREAK       0x40
224 #define LCR_PZERO       0x28
225 #define LCR_PEVEN       0x18
226 #define LCR_PODD        0x08
227 #define LCR_STOP1       0x00
228 #define LCR_STOP2       0x04
229 #define LCR_BIT5        0x00
230 #define LCR_BIT6        0x02
231 #define LCR_BIT7        0x01
232 #define LCR_BIT8        0x03
233
234 /* YAM Modem <-> UART Port mapping */
235
236 #define TX_RDY          MSR_DCTS                /* transmitter ready to send */
237 #define RX_DCD          MSR_DCD                 /* carrier detect */
238 #define RX_FLAG         MSR_RING                /* hdlc flag received */
239 #define FPGA_DONE       MSR_DSR                 /* FPGA is configured */
240 #define PTT_ON          (MCR_RTS|MCR_OUT2)      /* activate PTT */
241 #define PTT_OFF         (MCR_DTR|MCR_OUT2)      /* release PTT */
242
243 #define ENABLE_RXINT    IER_RX                  /* enable uart rx interrupt during rx */
244 #define ENABLE_TXINT    IER_MSR                 /* enable uart ms interrupt during tx */
245 #define ENABLE_RTXINT   (IER_RX|IER_MSR)        /* full duplex operations */
246
247
248 /*************************************************************************
249 * CRC Tables
250 ************************************************************************/
251
252 static const unsigned char chktabl[256] =
253 {0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
254  0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
255  0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
256  0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
257  0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
258  0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
259  0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
260  0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
261  0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
262  0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
263  0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
264  0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
265  0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
266  0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
267  0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
268  0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
269  0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
270  0x78};
271 static const unsigned char chktabh[256] =
272 {0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
273  0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
274  0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
275  0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
276  0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
277  0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
278  0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
279  0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
280  0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
281  0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
282  0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
283  0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
284  0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
285  0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
286  0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
287  0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
288  0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
289  0x0f};
290
291 /*************************************************************************
292 * FPGA functions
293 ************************************************************************/
294
295 static void delay(int ms)
296 {
297         unsigned long timeout = jiffies + ((ms * HZ) / 1000);
298         while (time_before(jiffies, timeout))
299                 cpu_relax();
300 }
301
302 /*
303  * reset FPGA
304  */
305
306 static void fpga_reset(int iobase)
307 {
308         outb(0, IER(iobase));
309         outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
310         outb(1, DLL(iobase));
311         outb(0, DLM(iobase));
312
313         outb(LCR_BIT5, LCR(iobase));
314         inb(LSR(iobase));
315         inb(MSR(iobase));
316         /* turn off FPGA supply voltage */
317         outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
318         delay(100);
319         /* turn on FPGA supply voltage again */
320         outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
321         delay(100);
322 }
323
324 /*
325  * send one byte to FPGA
326  */
327
328 static int fpga_write(int iobase, unsigned char wrd)
329 {
330         unsigned char bit;
331         int k;
332         unsigned long timeout = jiffies + HZ / 10;
333
334         for (k = 0; k < 8; k++) {
335                 bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
336                 outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
337                 wrd <<= 1;
338                 outb(0xfc, THR(iobase));
339                 while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
340                         if (time_after(jiffies, timeout))
341                                 return -1;
342         }
343
344         return 0;
345 }
346
347 /*
348  * predef should be 0 for loading user defined mcs
349  * predef should be YAM_1200 for loading predef 1200 mcs
350  * predef should be YAM_9600 for loading predef 9600 mcs
351  */
352 static unsigned char *add_mcs(unsigned char *bits, int bitrate,
353                               unsigned int predef)
354 {
355         const char *fw_name[2] = {FIRMWARE_9600, FIRMWARE_1200};
356         const struct firmware *fw;
357         struct platform_device *pdev;
358         struct yam_mcs *p;
359         int err;
360
361         switch (predef) {
362         case 0:
363                 fw = NULL;
364                 break;
365         case YAM_1200:
366         case YAM_9600:
367                 predef--;
368                 pdev = platform_device_register_simple("yam", 0, NULL, 0);
369                 if (IS_ERR(pdev)) {
370                         printk(KERN_ERR "yam: Failed to register firmware\n");
371                         return NULL;
372                 }
373                 err = request_firmware(&fw, fw_name[predef], &pdev->dev);
374                 platform_device_unregister(pdev);
375                 if (err) {
376                         printk(KERN_ERR "Failed to load firmware \"%s\"\n",
377                                fw_name[predef]);
378                         return NULL;
379                 }
380                 if (fw->size != YAM_FPGA_SIZE) {
381                         printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n",
382                                fw->size, fw_name[predef]);
383                         release_firmware(fw);
384                         return NULL;
385                 }
386                 bits = (unsigned char *)fw->data;
387                 break;
388         default:
389                 printk(KERN_ERR "yam: Invalid predef number %u\n", predef);
390                 return NULL;
391         }
392
393         /* If it already exists, replace the bit data */
394         p = yam_data;
395         while (p) {
396                 if (p->bitrate == bitrate) {
397                         memcpy(p->bits, bits, YAM_FPGA_SIZE);
398                         goto out;
399                 }
400                 p = p->next;
401         }
402
403         /* Allocate a new mcs */
404         if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
405                 release_firmware(fw);
406                 return NULL;
407         }
408         memcpy(p->bits, bits, YAM_FPGA_SIZE);
409         p->bitrate = bitrate;
410         p->next = yam_data;
411         yam_data = p;
412  out:
413         release_firmware(fw);
414         return p->bits;
415 }
416
417 static unsigned char *get_mcs(int bitrate)
418 {
419         struct yam_mcs *p;
420
421         p = yam_data;
422         while (p) {
423                 if (p->bitrate == bitrate)
424                         return p->bits;
425                 p = p->next;
426         }
427
428         /* Load predefined mcs data */
429         switch (bitrate) {
430         case 1200:
431                 /* setting predef as YAM_1200 for loading predef 1200 mcs */
432                 return add_mcs(NULL, bitrate, YAM_1200);
433         default:
434                 /* setting predef as YAM_9600 for loading predef 9600 mcs */
435                 return add_mcs(NULL, bitrate, YAM_9600);
436         }
437 }
438
439 /*
440  * download bitstream to FPGA
441  * data is contained in bits[] array in yam1200.h resp. yam9600.h
442  */
443
444 static int fpga_download(int iobase, int bitrate)
445 {
446         int i, rc;
447         unsigned char *pbits;
448
449         pbits = get_mcs(bitrate);
450         if (pbits == NULL)
451                 return -1;
452
453         fpga_reset(iobase);
454         for (i = 0; i < YAM_FPGA_SIZE; i++) {
455                 if (fpga_write(iobase, pbits[i])) {
456                         printk(KERN_ERR "yam: error in write cycle\n");
457                         return -1;                      /* write... */
458                 }
459         }
460
461         fpga_write(iobase, 0xFF);
462         rc = inb(MSR(iobase));          /* check DONE signal */
463
464         /* Needed for some hardwares */
465         delay(50);
466
467         return (rc & MSR_DSR) ? 0 : -1;
468 }
469
470
471 /************************************************************************
472 * Serial port init 
473 ************************************************************************/
474
475 static void yam_set_uart(struct net_device *dev)
476 {
477         struct yam_port *yp = netdev_priv(dev);
478         int divisor = 115200 / yp->baudrate;
479
480         outb(0, IER(dev->base_addr));
481         outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
482         outb(divisor, DLL(dev->base_addr));
483         outb(0, DLM(dev->base_addr));
484         outb(LCR_BIT8, LCR(dev->base_addr));
485         outb(PTT_OFF, MCR(dev->base_addr));
486         outb(0x00, FCR(dev->base_addr));
487
488         /* Flush pending irq */
489
490         inb(RBR(dev->base_addr));
491         inb(MSR(dev->base_addr));
492
493         /* Enable rx irq */
494
495         outb(ENABLE_RTXINT, IER(dev->base_addr));
496 }
497
498
499 /* --------------------------------------------------------------------- */
500
501 enum uart {
502         c_uart_unknown, c_uart_8250,
503         c_uart_16450, c_uart_16550, c_uart_16550A
504 };
505
506 static const char *uart_str[] =
507 {"unknown", "8250", "16450", "16550", "16550A"};
508
509 static enum uart yam_check_uart(unsigned int iobase)
510 {
511         unsigned char b1, b2, b3;
512         enum uart u;
513         enum uart uart_tab[] =
514         {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
515
516         b1 = inb(MCR(iobase));
517         outb(b1 | 0x10, MCR(iobase));   /* loopback mode */
518         b2 = inb(MSR(iobase));
519         outb(0x1a, MCR(iobase));
520         b3 = inb(MSR(iobase)) & 0xf0;
521         outb(b1, MCR(iobase));          /* restore old values */
522         outb(b2, MSR(iobase));
523         if (b3 != 0x90)
524                 return c_uart_unknown;
525         inb(RBR(iobase));
526         inb(RBR(iobase));
527         outb(0x01, FCR(iobase));        /* enable FIFOs */
528         u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
529         if (u == c_uart_16450) {
530                 outb(0x5a, SCR(iobase));
531                 b1 = inb(SCR(iobase));
532                 outb(0xa5, SCR(iobase));
533                 b2 = inb(SCR(iobase));
534                 if ((b1 != 0x5a) || (b2 != 0xa5))
535                         u = c_uart_8250;
536         }
537         return u;
538 }
539
540 /******************************************************************************
541 * Rx Section
542 ******************************************************************************/
543 static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
544 {
545         if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
546                 int pkt_len = yp->rx_len - 2 + 1;       /* -CRC + kiss */
547                 struct sk_buff *skb;
548
549                 if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
550                         /* Bad crc */
551                 } else {
552                         if (!(skb = dev_alloc_skb(pkt_len))) {
553                                 printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
554                                 ++dev->stats.rx_dropped;
555                         } else {
556                                 unsigned char *cp;
557                                 cp = skb_put(skb, pkt_len);
558                                 *cp++ = 0;              /* KISS kludge */
559                                 memcpy(cp, yp->rx_buf, pkt_len - 1);
560                                 skb->protocol = ax25_type_trans(skb, dev);
561                                 netif_rx(skb);
562                                 ++dev->stats.rx_packets;
563                         }
564                 }
565         }
566         yp->rx_len = 0;
567         yp->rx_crcl = 0x21;
568         yp->rx_crch = 0xf3;
569 }
570
571 static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
572 {
573         if (yp->rx_len < YAM_MAX_FRAME) {
574                 unsigned char c = yp->rx_crcl;
575                 yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
576                 yp->rx_crch = (chktabh[c] ^ rxb);
577                 yp->rx_buf[yp->rx_len++] = rxb;
578         }
579 }
580
581 /********************************************************************************
582 * TX Section
583 ********************************************************************************/
584
585 static void ptt_on(struct net_device *dev)
586 {
587         outb(PTT_ON, MCR(dev->base_addr));
588 }
589
590 static void ptt_off(struct net_device *dev)
591 {
592         outb(PTT_OFF, MCR(dev->base_addr));
593 }
594
595 static netdev_tx_t yam_send_packet(struct sk_buff *skb,
596                                          struct net_device *dev)
597 {
598         struct yam_port *yp = netdev_priv(dev);
599
600         if (skb->protocol == htons(ETH_P_IP))
601                 return ax25_ip_xmit(skb);
602
603         skb_queue_tail(&yp->send_queue, skb);
604         netif_trans_update(dev);
605         return NETDEV_TX_OK;
606 }
607
608 static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
609 {
610         if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
611                 yp->tx_count = 1;
612         else
613                 yp->tx_count = (yp->bitrate * yp->txd) / 8000;
614         yp->tx_state = TX_HEAD;
615         ptt_on(dev);
616 }
617
618 static void yam_arbitrate(struct net_device *dev)
619 {
620         struct yam_port *yp = netdev_priv(dev);
621
622         if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
623             skb_queue_empty(&yp->send_queue))
624                 return;
625         /* tx_state is TX_OFF and there is data to send */
626
627         if (yp->dupmode) {
628                 /* Full duplex mode, don't wait */
629                 yam_start_tx(dev, yp);
630                 return;
631         }
632         if (yp->dcd) {
633                 /* DCD on, wait slotime ... */
634                 yp->slotcnt = yp->slot / 10;
635                 return;
636         }
637         /* Is slottime passed ? */
638         if ((--yp->slotcnt) > 0)
639                 return;
640
641         yp->slotcnt = yp->slot / 10;
642
643         /* is random > persist ? */
644         if ((prandom_u32() % 256) > yp->pers)
645                 return;
646
647         yam_start_tx(dev, yp);
648 }
649
650 static void yam_dotimer(struct timer_list *unused)
651 {
652         int i;
653
654         for (i = 0; i < NR_PORTS; i++) {
655                 struct net_device *dev = yam_devs[i];
656                 if (dev && netif_running(dev))
657                         yam_arbitrate(dev);
658         }
659         yam_timer.expires = jiffies + HZ / 100;
660         add_timer(&yam_timer);
661 }
662
663 static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
664 {
665         struct sk_buff *skb;
666         unsigned char b, temp;
667
668         switch (yp->tx_state) {
669         case TX_OFF:
670                 break;
671         case TX_HEAD:
672                 if (--yp->tx_count <= 0) {
673                         if (!(skb = skb_dequeue(&yp->send_queue))) {
674                                 ptt_off(dev);
675                                 yp->tx_state = TX_OFF;
676                                 break;
677                         }
678                         yp->tx_state = TX_DATA;
679                         if (skb->data[0] != 0) {
680 /*                              do_kiss_params(s, skb->data, skb->len); */
681                                 dev_kfree_skb_any(skb);
682                                 break;
683                         }
684                         yp->tx_len = skb->len - 1;      /* strip KISS byte */
685                         if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
686                                 dev_kfree_skb_any(skb);
687                                 break;
688                         }
689                         skb_copy_from_linear_data_offset(skb, 1,
690                                                          yp->tx_buf,
691                                                          yp->tx_len);
692                         dev_kfree_skb_any(skb);
693                         yp->tx_count = 0;
694                         yp->tx_crcl = 0x21;
695                         yp->tx_crch = 0xf3;
696                         yp->tx_state = TX_DATA;
697                 }
698                 break;
699         case TX_DATA:
700                 b = yp->tx_buf[yp->tx_count++];
701                 outb(b, THR(dev->base_addr));
702                 temp = yp->tx_crcl;
703                 yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
704                 yp->tx_crch = chktabh[temp] ^ b;
705                 if (yp->tx_count >= yp->tx_len) {
706                         yp->tx_state = TX_CRC1;
707                 }
708                 break;
709         case TX_CRC1:
710                 yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
711                 yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
712                 outb(yp->tx_crcl, THR(dev->base_addr));
713                 yp->tx_state = TX_CRC2;
714                 break;
715         case TX_CRC2:
716                 outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
717                 if (skb_queue_empty(&yp->send_queue)) {
718                         yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
719                         if (yp->dupmode == 2)
720                                 yp->tx_count += (yp->bitrate * yp->holdd) / 8;
721                         if (yp->tx_count == 0)
722                                 yp->tx_count = 1;
723                         yp->tx_state = TX_TAIL;
724                 } else {
725                         yp->tx_count = 1;
726                         yp->tx_state = TX_HEAD;
727                 }
728                 ++dev->stats.tx_packets;
729                 break;
730         case TX_TAIL:
731                 if (--yp->tx_count <= 0) {
732                         yp->tx_state = TX_OFF;
733                         ptt_off(dev);
734                 }
735                 break;
736         }
737 }
738
739 /***********************************************************************************
740 * ISR routine
741 ************************************************************************************/
742
743 static irqreturn_t yam_interrupt(int irq, void *dev_id)
744 {
745         struct net_device *dev;
746         struct yam_port *yp;
747         unsigned char iir;
748         int counter = 100;
749         int i;
750         int handled = 0;
751
752         for (i = 0; i < NR_PORTS; i++) {
753                 dev = yam_devs[i];
754                 yp = netdev_priv(dev);
755
756                 if (!netif_running(dev))
757                         continue;
758
759                 while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
760                         unsigned char msr = inb(MSR(dev->base_addr));
761                         unsigned char lsr = inb(LSR(dev->base_addr));
762                         unsigned char rxb;
763
764                         handled = 1;
765
766                         if (lsr & LSR_OE)
767                                 ++dev->stats.rx_fifo_errors;
768
769                         yp->dcd = (msr & RX_DCD) ? 1 : 0;
770
771                         if (--counter <= 0) {
772                                 printk(KERN_ERR "%s: too many irq iir=%d\n",
773                                                 dev->name, iir);
774                                 goto out;
775                         }
776                         if (msr & TX_RDY) {
777                                 ++yp->nb_mdint;
778                                 yam_tx_byte(dev, yp);
779                         }
780                         if (lsr & LSR_RXC) {
781                                 ++yp->nb_rxint;
782                                 rxb = inb(RBR(dev->base_addr));
783                                 if (msr & RX_FLAG)
784                                         yam_rx_flag(dev, yp);
785                                 else
786                                         yam_rx_byte(dev, yp, rxb);
787                         }
788                 }
789         }
790 out:
791         return IRQ_RETVAL(handled);
792 }
793
794 #ifdef CONFIG_PROC_FS
795
796 static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
797 {
798         return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
799 }
800
801 static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
802 {
803         ++*pos;
804         return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
805 }
806
807 static void yam_seq_stop(struct seq_file *seq, void *v)
808 {
809 }
810
811 static int yam_seq_show(struct seq_file *seq, void *v)
812 {
813         struct net_device *dev = v;
814         const struct yam_port *yp = netdev_priv(dev);
815
816         seq_printf(seq, "Device %s\n", dev->name);
817         seq_printf(seq, "  Up       %d\n", netif_running(dev));
818         seq_printf(seq, "  Speed    %u\n", yp->bitrate);
819         seq_printf(seq, "  IoBase   0x%x\n", yp->iobase);
820         seq_printf(seq, "  BaudRate %u\n", yp->baudrate);
821         seq_printf(seq, "  IRQ      %u\n", yp->irq);
822         seq_printf(seq, "  TxState  %u\n", yp->tx_state);
823         seq_printf(seq, "  Duplex   %u\n", yp->dupmode);
824         seq_printf(seq, "  HoldDly  %u\n", yp->holdd);
825         seq_printf(seq, "  TxDelay  %u\n", yp->txd);
826         seq_printf(seq, "  TxTail   %u\n", yp->txtail);
827         seq_printf(seq, "  SlotTime %u\n", yp->slot);
828         seq_printf(seq, "  Persist  %u\n", yp->pers);
829         seq_printf(seq, "  TxFrames %lu\n", dev->stats.tx_packets);
830         seq_printf(seq, "  RxFrames %lu\n", dev->stats.rx_packets);
831         seq_printf(seq, "  TxInt    %u\n", yp->nb_mdint);
832         seq_printf(seq, "  RxInt    %u\n", yp->nb_rxint);
833         seq_printf(seq, "  RxOver   %lu\n", dev->stats.rx_fifo_errors);
834         seq_printf(seq, "\n");
835         return 0;
836 }
837
838 static const struct seq_operations yam_seqops = {
839         .start = yam_seq_start,
840         .next = yam_seq_next,
841         .stop = yam_seq_stop,
842         .show = yam_seq_show,
843 };
844
845 static int yam_info_open(struct inode *inode, struct file *file)
846 {
847         return seq_open(file, &yam_seqops);
848 }
849
850 static const struct file_operations yam_info_fops = {
851         .owner = THIS_MODULE,
852         .open = yam_info_open,
853         .read = seq_read,
854         .llseek = seq_lseek,
855         .release = seq_release,
856 };
857
858 #endif
859
860
861 /* --------------------------------------------------------------------- */
862
863 static int yam_open(struct net_device *dev)
864 {
865         struct yam_port *yp = netdev_priv(dev);
866         enum uart u;
867         int i;
868         int ret=0;
869
870         printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
871
872         if (!yp->bitrate)
873                 return -ENXIO;
874         if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
875                 dev->irq < 2 || dev->irq > 15) {
876                 return -ENXIO;
877         }
878         if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
879         {
880                 printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
881                 return -EACCES;
882         }
883         if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
884                 printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
885                 ret = -EIO;
886                 goto out_release_base;
887         }
888         if (fpga_download(dev->base_addr, yp->bitrate)) {
889                 printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
890                 ret = -EIO;
891                 goto out_release_base;
892         }
893         outb(0, IER(dev->base_addr));
894         if (request_irq(dev->irq, yam_interrupt, IRQF_SHARED, dev->name, dev)) {
895                 printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
896                 ret = -EBUSY;
897                 goto out_release_base;
898         }
899
900         yam_set_uart(dev);
901
902         netif_start_queue(dev);
903         
904         yp->slotcnt = yp->slot / 10;
905
906         /* Reset overruns for all ports - FPGA programming makes overruns */
907         for (i = 0; i < NR_PORTS; i++) {
908                 struct net_device *yam_dev = yam_devs[i];
909
910                 inb(LSR(yam_dev->base_addr));
911                 yam_dev->stats.rx_fifo_errors = 0;
912         }
913
914         printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
915                    uart_str[u]);
916         return 0;
917
918 out_release_base:
919         release_region(dev->base_addr, YAM_EXTENT);
920         return ret;
921 }
922
923 /* --------------------------------------------------------------------- */
924
925 static int yam_close(struct net_device *dev)
926 {
927         struct sk_buff *skb;
928         struct yam_port *yp = netdev_priv(dev);
929
930         if (!dev)
931                 return -EINVAL;
932
933         /*
934          * disable interrupts
935          */
936         outb(0, IER(dev->base_addr));
937         outb(1, MCR(dev->base_addr));
938         /* Remove IRQ handler if last */
939         free_irq(dev->irq,dev);
940         release_region(dev->base_addr, YAM_EXTENT);
941         netif_stop_queue(dev);
942         while ((skb = skb_dequeue(&yp->send_queue)))
943                 dev_kfree_skb(skb);
944
945         printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
946                    yam_drvname, dev->base_addr, dev->irq);
947         return 0;
948 }
949
950 /* --------------------------------------------------------------------- */
951
952 static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
953 {
954         struct yam_port *yp = netdev_priv(dev);
955         struct yamdrv_ioctl_cfg yi;
956         struct yamdrv_ioctl_mcs *ym;
957         int ioctl_cmd;
958
959         if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
960                  return -EFAULT;
961
962         if (yp->magic != YAM_MAGIC)
963                 return -EINVAL;
964
965         if (!capable(CAP_NET_ADMIN))
966                 return -EPERM;
967
968         if (cmd != SIOCDEVPRIVATE)
969                 return -EINVAL;
970
971         switch (ioctl_cmd) {
972
973         case SIOCYAMRESERVED:
974                 return -EINVAL;                 /* unused */
975
976         case SIOCYAMSMCS:
977                 if (netif_running(dev))
978                         return -EINVAL;         /* Cannot change this parameter when up */
979                 ym = memdup_user(ifr->ifr_data,
980                                  sizeof(struct yamdrv_ioctl_mcs));
981                 if (IS_ERR(ym))
982                         return PTR_ERR(ym);
983                 if (ym->bitrate > YAM_MAXBITRATE) {
984                         kfree(ym);
985                         return -EINVAL;
986                 }
987                 /* setting predef as 0 for loading userdefined mcs data */
988                 add_mcs(ym->bits, ym->bitrate, 0);
989                 kfree(ym);
990                 break;
991
992         case SIOCYAMSCFG:
993                 if (!capable(CAP_SYS_RAWIO))
994                         return -EPERM;
995                 if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
996                          return -EFAULT;
997
998                 if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
999                         return -EINVAL;         /* Cannot change this parameter when up */
1000                 if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
1001                         return -EINVAL;         /* Cannot change this parameter when up */
1002                 if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
1003                         return -EINVAL;         /* Cannot change this parameter when up */
1004                 if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
1005                         return -EINVAL;         /* Cannot change this parameter when up */
1006
1007                 if (yi.cfg.mask & YAM_IOBASE) {
1008                         yp->iobase = yi.cfg.iobase;
1009                         dev->base_addr = yi.cfg.iobase;
1010                 }
1011                 if (yi.cfg.mask & YAM_IRQ) {
1012                         if (yi.cfg.irq > 15)
1013                                 return -EINVAL;
1014                         yp->irq = yi.cfg.irq;
1015                         dev->irq = yi.cfg.irq;
1016                 }
1017                 if (yi.cfg.mask & YAM_BITRATE) {
1018                         if (yi.cfg.bitrate > YAM_MAXBITRATE)
1019                                 return -EINVAL;
1020                         yp->bitrate = yi.cfg.bitrate;
1021                 }
1022                 if (yi.cfg.mask & YAM_BAUDRATE) {
1023                         if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
1024                                 return -EINVAL;
1025                         yp->baudrate = yi.cfg.baudrate;
1026                 }
1027                 if (yi.cfg.mask & YAM_MODE) {
1028                         if (yi.cfg.mode > YAM_MAXMODE)
1029                                 return -EINVAL;
1030                         yp->dupmode = yi.cfg.mode;
1031                 }
1032                 if (yi.cfg.mask & YAM_HOLDDLY) {
1033                         if (yi.cfg.holddly > YAM_MAXHOLDDLY)
1034                                 return -EINVAL;
1035                         yp->holdd = yi.cfg.holddly;
1036                 }
1037                 if (yi.cfg.mask & YAM_TXDELAY) {
1038                         if (yi.cfg.txdelay > YAM_MAXTXDELAY)
1039                                 return -EINVAL;
1040                         yp->txd = yi.cfg.txdelay;
1041                 }
1042                 if (yi.cfg.mask & YAM_TXTAIL) {
1043                         if (yi.cfg.txtail > YAM_MAXTXTAIL)
1044                                 return -EINVAL;
1045                         yp->txtail = yi.cfg.txtail;
1046                 }
1047                 if (yi.cfg.mask & YAM_PERSIST) {
1048                         if (yi.cfg.persist > YAM_MAXPERSIST)
1049                                 return -EINVAL;
1050                         yp->pers = yi.cfg.persist;
1051                 }
1052                 if (yi.cfg.mask & YAM_SLOTTIME) {
1053                         if (yi.cfg.slottime > YAM_MAXSLOTTIME)
1054                                 return -EINVAL;
1055                         yp->slot = yi.cfg.slottime;
1056                         yp->slotcnt = yp->slot / 10;
1057                 }
1058                 break;
1059
1060         case SIOCYAMGCFG:
1061                 memset(&yi, 0, sizeof(yi));
1062                 yi.cfg.mask = 0xffffffff;
1063                 yi.cfg.iobase = yp->iobase;
1064                 yi.cfg.irq = yp->irq;
1065                 yi.cfg.bitrate = yp->bitrate;
1066                 yi.cfg.baudrate = yp->baudrate;
1067                 yi.cfg.mode = yp->dupmode;
1068                 yi.cfg.txdelay = yp->txd;
1069                 yi.cfg.holddly = yp->holdd;
1070                 yi.cfg.txtail = yp->txtail;
1071                 yi.cfg.persist = yp->pers;
1072                 yi.cfg.slottime = yp->slot;
1073                 if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
1074                          return -EFAULT;
1075                 break;
1076
1077         default:
1078                 return -EINVAL;
1079
1080         }
1081
1082         return 0;
1083 }
1084
1085 /* --------------------------------------------------------------------- */
1086
1087 static int yam_set_mac_address(struct net_device *dev, void *addr)
1088 {
1089         struct sockaddr *sa = (struct sockaddr *) addr;
1090
1091         /* addr is an AX.25 shifted ASCII mac address */
1092         memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1093         return 0;
1094 }
1095
1096 /* --------------------------------------------------------------------- */
1097
1098 static const struct net_device_ops yam_netdev_ops = {
1099         .ndo_open            = yam_open,
1100         .ndo_stop            = yam_close,
1101         .ndo_start_xmit      = yam_send_packet,
1102         .ndo_do_ioctl        = yam_ioctl,
1103         .ndo_set_mac_address = yam_set_mac_address,
1104 };
1105
1106 static void yam_setup(struct net_device *dev)
1107 {
1108         struct yam_port *yp = netdev_priv(dev);
1109
1110         yp->magic = YAM_MAGIC;
1111         yp->bitrate = DEFAULT_BITRATE;
1112         yp->baudrate = DEFAULT_BITRATE * 2;
1113         yp->iobase = 0;
1114         yp->irq = 0;
1115         yp->dupmode = 0;
1116         yp->holdd = DEFAULT_HOLDD;
1117         yp->txd = DEFAULT_TXD;
1118         yp->txtail = DEFAULT_TXTAIL;
1119         yp->slot = DEFAULT_SLOT;
1120         yp->pers = DEFAULT_PERS;
1121         yp->dev = dev;
1122
1123         dev->base_addr = yp->iobase;
1124         dev->irq = yp->irq;
1125
1126         skb_queue_head_init(&yp->send_queue);
1127
1128         dev->netdev_ops = &yam_netdev_ops;
1129         dev->header_ops = &ax25_header_ops;
1130
1131         dev->type = ARPHRD_AX25;
1132         dev->hard_header_len = AX25_MAX_HEADER_LEN;
1133         dev->mtu = AX25_MTU;
1134         dev->addr_len = AX25_ADDR_LEN;
1135         memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1136         memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
1137 }
1138
1139 static int __init yam_init_driver(void)
1140 {
1141         struct net_device *dev;
1142         int i, err;
1143         char name[IFNAMSIZ];
1144
1145         printk(yam_drvinfo);
1146
1147         for (i = 0; i < NR_PORTS; i++) {
1148                 sprintf(name, "yam%d", i);
1149                 
1150                 dev = alloc_netdev(sizeof(struct yam_port), name,
1151                                    NET_NAME_UNKNOWN, yam_setup);
1152                 if (!dev) {
1153                         pr_err("yam: cannot allocate net device\n");
1154                         err = -ENOMEM;
1155                         goto error;
1156                 }
1157                 
1158                 err = register_netdev(dev);
1159                 if (err) {
1160                         printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
1161                         goto error;
1162                 }
1163                 yam_devs[i] = dev;
1164
1165         }
1166
1167         timer_setup(&yam_timer, yam_dotimer, 0);
1168         yam_timer.expires = jiffies + HZ / 100;
1169         add_timer(&yam_timer);
1170
1171         proc_create("yam", S_IRUGO, init_net.proc_net, &yam_info_fops);
1172         return 0;
1173  error:
1174         while (--i >= 0) {
1175                 unregister_netdev(yam_devs[i]);
1176                 free_netdev(yam_devs[i]);
1177         }
1178         return err;
1179 }
1180
1181 /* --------------------------------------------------------------------- */
1182
1183 static void __exit yam_cleanup_driver(void)
1184 {
1185         struct yam_mcs *p;
1186         int i;
1187
1188         del_timer_sync(&yam_timer);
1189         for (i = 0; i < NR_PORTS; i++) {
1190                 struct net_device *dev = yam_devs[i];
1191                 if (dev) {
1192                         unregister_netdev(dev);
1193                         free_netdev(dev);
1194                 }
1195         }
1196
1197         while (yam_data) {
1198                 p = yam_data;
1199                 yam_data = yam_data->next;
1200                 kfree(p);
1201         }
1202
1203         remove_proc_entry("yam", init_net.proc_net);
1204 }
1205
1206 /* --------------------------------------------------------------------- */
1207
1208 MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
1209 MODULE_DESCRIPTION("Yam amateur radio modem driver");
1210 MODULE_LICENSE("GPL");
1211 MODULE_FIRMWARE(FIRMWARE_1200);
1212 MODULE_FIRMWARE(FIRMWARE_9600);
1213
1214 module_init(yam_init_driver);
1215 module_exit(yam_cleanup_driver);
1216
1217 /* --------------------------------------------------------------------- */
1218