drivers/net/e1000e/netdev.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2009 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include <linux/module.h>
  30 #include <linux/types.h>
  31 #include <linux/init.h>
  32 #include <linux/pci.h>
  33 #include <linux/vmalloc.h>
  34 #include <linux/pagemap.h>
  35 #include <linux/delay.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/tcp.h>
  38 #include <linux/ipv6.h>
  39 #include <net/checksum.h>
  40 #include <net/ip6_checksum.h>
  41 #include <linux/mii.h>
  42 #include <linux/ethtool.h>
  43 #include <linux/if_vlan.h>
  44 #include <linux/cpu.h>
  45 #include <linux/smp.h>
  46 #include <linux/pm_qos_params.h>
  47 #include <linux/aer.h>
  48
  49 #include "e1000.h"
  50
  51 #define DRV_VERSION "1.0.2-k2"
  52 char e1000e_driver_name[] = "e1000e";
  53 const char e1000e_driver_version[] = DRV_VERSION;
  54
  55 static const struct e1000_info *e1000_info_tbl[] = {
  56         [board_82571]           = &e1000_82571_info,
  57         [board_82572]           = &e1000_82572_info,
  58         [board_82573]           = &e1000_82573_info,
  59         [board_82574]           = &e1000_82574_info,
  60         [board_82583]           = &e1000_82583_info,
  61         [board_80003es2lan]     = &e1000_es2_info,
  62         [board_ich8lan]         = &e1000_ich8_info,
  63         [board_ich9lan]         = &e1000_ich9_info,
  64         [board_ich10lan]        = &e1000_ich10_info,
  65         [board_pchlan]          = &e1000_pch_info,
  66 };
  67
  68 /**
  69  * e1000_desc_unused - calculate if we have unused descriptors
  70  **/
  71 static int e1000_desc_unused(struct e1000_ring *ring)
  72 {
  73         if (ring->next_to_clean > ring->next_to_use)
  74                 return ring->next_to_clean - ring->next_to_use - 1;
  75
  76         return ring->count + ring->next_to_clean - ring->next_to_use - 1;
  77 }
  78
  79 /**
  80  * e1000_receive_skb - helper function to handle Rx indications
  81  * @adapter: board private structure
  82  * @status: descriptor status field as written by hardware
  83  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
  84  * @skb: pointer to sk_buff to be indicated to stack
  85  **/
  86 static void e1000_receive_skb(struct e1000_adapter *adapter,
  87                               struct net_device *netdev,
  88                               struct sk_buff *skb,
  89                               u8 status, __le16 vlan)
  90 {
  91         skb->protocol = eth_type_trans(skb, netdev);
  92
  93         if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
  94                 vlan_gro_receive(&adapter->napi, adapter->vlgrp,
  95                                  le16_to_cpu(vlan), skb);
  96         else
  97                 napi_gro_receive(&adapter->napi, skb);
  98 }
  99
 100 /**
 101  * e1000_rx_checksum - Receive Checksum Offload for 82543
 102  * @adapter:     board private structure
 103  * @status_err:  receive descriptor status and error fields
 104  * @csum:       receive descriptor csum field
 105  * @sk_buff:     socket buffer with received data
 106  **/
 107 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 108                               u32 csum, struct sk_buff *skb)
 109 {
 110         u16 status = (u16)status_err;
 111         u8 errors = (u8)(status_err >> 24);
 112         skb->ip_summed = CHECKSUM_NONE;
 113
 114         /* Ignore Checksum bit is set */
 115         if (status & E1000_RXD_STAT_IXSM)
 116                 return;
 117         /* TCP/UDP checksum error bit is set */
 118         if (errors & E1000_RXD_ERR_TCPE) {
 119                 /* let the stack verify checksum errors */
 120                 adapter->hw_csum_err++;
 121                 return;
 122         }
 123
 124         /* TCP/UDP Checksum has not been calculated */
 125         if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
 126                 return;
 127
 128         /* It must be a TCP or UDP packet with a valid checksum */
 129         if (status & E1000_RXD_STAT_TCPCS) {
 130                 /* TCP checksum is good */
 131                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 132         } else {
 133                 /*
 134                  * IP fragment with UDP payload
 135                  * Hardware complements the payload checksum, so we undo it
 136                  * and then put the value in host order for further stack use.
 137                  */
 138                 __sum16 sum = (__force __sum16)htons(csum);
 139                 skb->csum = csum_unfold(~sum);
 140                 skb->ip_summed = CHECKSUM_COMPLETE;
 141         }
 142         adapter->hw_csum_good++;
 143 }
 144
 145 /**
 146  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
 147  * @adapter: address of board private structure
 148  **/
 149 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 150                                    int cleaned_count)
 151 {
 152         struct net_device *netdev = adapter->netdev;
 153         struct pci_dev *pdev = adapter->pdev;
 154         struct e1000_ring *rx_ring = adapter->rx_ring;
 155         struct e1000_rx_desc *rx_desc;
 156         struct e1000_buffer *buffer_info;
 157         struct sk_buff *skb;
 158         unsigned int i;
 159         unsigned int bufsz = adapter->rx_buffer_len;
 160
 161         i = rx_ring->next_to_use;
 162         buffer_info = &rx_ring->buffer_info[i];
 163
 164         while (cleaned_count--) {
 165                 skb = buffer_info->skb;
 166                 if (skb) {
 167                         skb_trim(skb, 0);
 168                         goto map_skb;
 169                 }
 170
 171                 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 172                 if (!skb) {
 173                         /* Better luck next round */
 174                         adapter->alloc_rx_buff_failed++;
 175                         break;
 176                 }
 177
 178                 buffer_info->skb = skb;
 179 map_skb:
 180                 buffer_info->dma = pci_map_single(pdev, skb->data,
 181                                                   adapter->rx_buffer_len,
 182                                                   PCI_DMA_FROMDEVICE);
 183                 if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
 184                         dev_err(&pdev->dev, "RX DMA map failed\n");
 185                         adapter->rx_dma_failed++;
 186                         break;
 187                 }
 188
 189                 rx_desc = E1000_RX_DESC(*rx_ring, i);
 190                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 191
 192                 i++;
 193                 if (i == rx_ring->count)
 194                         i = 0;
 195                 buffer_info = &rx_ring->buffer_info[i];
 196         }
 197
 198         if (rx_ring->next_to_use != i) {
 199                 rx_ring->next_to_use = i;
 200                 if (i-- == 0)
 201                         i = (rx_ring->count - 1);
 202
 203                 /*
 204                  * Force memory writes to complete before letting h/w
 205                  * know there are new descriptors to fetch.  (Only
 206                  * applicable for weak-ordered memory model archs,
 207                  * such as IA-64).
 208                  */
 209                 wmb();
 210                 writel(i, adapter->hw.hw_addr + rx_ring->tail);
 211         }
 212 }
 213
 214 /**
 215  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
 216  * @adapter: address of board private structure
 217  **/
 218 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 219                                       int cleaned_count)
 220 {
 221         struct net_device *netdev = adapter->netdev;
 222         struct pci_dev *pdev = adapter->pdev;
 223         union e1000_rx_desc_packet_split *rx_desc;
 224         struct e1000_ring *rx_ring = adapter->rx_ring;
 225         struct e1000_buffer *buffer_info;
 226         struct e1000_ps_page *ps_page;
 227         struct sk_buff *skb;
 228         unsigned int i, j;
 229
 230         i = rx_ring->next_to_use;
 231         buffer_info = &rx_ring->buffer_info[i];
 232
 233         while (cleaned_count--) {
 234                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
 235
 236                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
 237                         ps_page = &buffer_info->ps_pages[j];
 238                         if (j >= adapter->rx_ps_pages) {
 239                                 /* all unused desc entries get hw null ptr */
 240                                 rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
 241                                 continue;
 242                         }
 243                         if (!ps_page->page) {
 244                                 ps_page->page = alloc_page(GFP_ATOMIC);
 245                                 if (!ps_page->page) {
 246                                         adapter->alloc_rx_buff_failed++;
 247                                         goto no_buffers;
 248                                 }
 249                                 ps_page->dma = pci_map_page(pdev,
 250                                                    ps_page->page,
 251                                                    0, PAGE_SIZE,
 252                                                    PCI_DMA_FROMDEVICE);
 253                                 if (pci_dma_mapping_error(pdev, ps_page->dma)) {
 254                                         dev_err(&adapter->pdev->dev,
 255                                           "RX DMA page map failed\n");
 256                                         adapter->rx_dma_failed++;
 257                                         goto no_buffers;
 258                                 }
 259                         }
 260                         /*
 261                          * Refresh the desc even if buffer_addrs
 262                          * didn't change because each write-back
 263                          * erases this info.
 264                          */
 265                         rx_desc->read.buffer_addr[j+1] =
 266                              cpu_to_le64(ps_page->dma);
 267                 }
 268
 269                 skb = netdev_alloc_skb_ip_align(netdev,
 270                                                 adapter->rx_ps_bsize0);
 271
 272                 if (!skb) {
 273                         adapter->alloc_rx_buff_failed++;
 274                         break;
 275                 }
 276
 277                 buffer_info->skb = skb;
 278                 buffer_info->dma = pci_map_single(pdev, skb->data,
 279                                                   adapter->rx_ps_bsize0,
 280                                                   PCI_DMA_FROMDEVICE);
 281                 if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
 282                         dev_err(&pdev->dev, "RX DMA map failed\n");
 283                         adapter->rx_dma_failed++;
 284                         /* cleanup skb */
 285                         dev_kfree_skb_any(skb);
 286                         buffer_info->skb = NULL;
 287                         break;
 288                 }
 289
 290                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
 291
 292                 i++;
 293                 if (i == rx_ring->count)
 294                         i = 0;
 295                 buffer_info = &rx_ring->buffer_info[i];
 296         }
 297
 298 no_buffers:
 299         if (rx_ring->next_to_use != i) {
 300                 rx_ring->next_to_use = i;
 301
 302                 if (!(i--))
 303                         i = (rx_ring->count - 1);
 304
 305                 /*
 306                  * Force memory writes to complete before letting h/w
 307                  * know there are new descriptors to fetch.  (Only
 308                  * applicable for weak-ordered memory model archs,
 309                  * such as IA-64).
 310                  */
 311                 wmb();
 312                 /*
 313                  * Hardware increments by 16 bytes, but packet split
 314                  * descriptors are 32 bytes...so we increment tail
 315                  * twice as much.
 316                  */
 317                 writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
 318         }
 319 }
 320
 321 /**
 322  * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
 323  * @adapter: address of board private structure
 324  * @cleaned_count: number of buffers to allocate this pass
 325  **/
 326
 327 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 328                                          int cleaned_count)
 329 {
 330         struct net_device *netdev = adapter->netdev;
 331         struct pci_dev *pdev = adapter->pdev;
 332         struct e1000_rx_desc *rx_desc;
 333         struct e1000_ring *rx_ring = adapter->rx_ring;
 334         struct e1000_buffer *buffer_info;
 335         struct sk_buff *skb;
 336         unsigned int i;
 337         unsigned int bufsz = 256 - 16 /* for skb_reserve */;
 338
 339         i = rx_ring->next_to_use;
 340         buffer_info = &rx_ring->buffer_info[i];
 341
 342         while (cleaned_count--) {
 343                 skb = buffer_info->skb;
 344                 if (skb) {
 345                         skb_trim(skb, 0);
 346                         goto check_page;
 347                 }
 348
 349                 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 350                 if (unlikely(!skb)) {
 351                         /* Better luck next round */
 352                         adapter->alloc_rx_buff_failed++;
 353                         break;
 354                 }
 355
 356                 buffer_info->skb = skb;
 357 check_page:
 358                 /* allocate a new page if necessary */
 359                 if (!buffer_info->page) {
 360                         buffer_info->page = alloc_page(GFP_ATOMIC);
 361                         if (unlikely(!buffer_info->page)) {
 362                                 adapter->alloc_rx_buff_failed++;
 363                                 break;
 364                         }
 365                 }
 366
 367                 if (!buffer_info->dma)
 368                         buffer_info->dma = pci_map_page(pdev,
 369                                                         buffer_info->page, 0,
 370                                                         PAGE_SIZE,
 371                                                         PCI_DMA_FROMDEVICE);
 372
 373                 rx_desc = E1000_RX_DESC(*rx_ring, i);
 374                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 375
 376                 if (unlikely(++i == rx_ring->count))
 377                         i = 0;
 378                 buffer_info = &rx_ring->buffer_info[i];
 379         }
 380
 381         if (likely(rx_ring->next_to_use != i)) {
 382                 rx_ring->next_to_use = i;
 383                 if (unlikely(i-- == 0))
 384                         i = (rx_ring->count - 1);
 385
 386                 /* Force memory writes to complete before letting h/w
 387                  * know there are new descriptors to fetch.  (Only
 388                  * applicable for weak-ordered memory model archs,
 389                  * such as IA-64). */
 390                 wmb();
 391                 writel(i, adapter->hw.hw_addr + rx_ring->tail);
 392         }
 393 }
 394
 395 /**
 396  * e1000_clean_rx_irq - Send received data up the network stack; legacy
 397  * @adapter: board private structure
 398  *
 399  * the return value indicates whether actual cleaning was done, there
 400  * is no guarantee that everything was cleaned
 401  **/
 402 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 403                                int *work_done, int work_to_do)
 404 {
 405         struct net_device *netdev = adapter->netdev;
 406         struct pci_dev *pdev = adapter->pdev;
 407         struct e1000_hw *hw = &adapter->hw;
 408         struct e1000_ring *rx_ring = adapter->rx_ring;
 409         struct e1000_rx_desc *rx_desc, *next_rxd;
 410         struct e1000_buffer *buffer_info, *next_buffer;
 411         u32 length;
 412         unsigned int i;
 413         int cleaned_count = 0;
 414         bool cleaned = 0;
 415         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 416
 417         i = rx_ring->next_to_clean;
 418         rx_desc = E1000_RX_DESC(*rx_ring, i);
 419         buffer_info = &rx_ring->buffer_info[i];
 420
 421         while (rx_desc->status & E1000_RXD_STAT_DD) {
 422                 struct sk_buff *skb;
 423                 u8 status;
 424
 425                 if (*work_done >= work_to_do)
 426                         break;
 427                 (*work_done)++;
 428
 429                 status = rx_desc->status;
 430                 skb = buffer_info->skb;
 431                 buffer_info->skb = NULL;
 432
 433                 prefetch(skb->data - NET_IP_ALIGN);
 434
 435                 i++;
 436                 if (i == rx_ring->count)
 437                         i = 0;
 438                 next_rxd = E1000_RX_DESC(*rx_ring, i);
 439                 prefetch(next_rxd);
 440
 441                 next_buffer = &rx_ring->buffer_info[i];
 442
 443                 cleaned = 1;
 444                 cleaned_count++;
 445                 pci_unmap_single(pdev,
 446                                  buffer_info->dma,
 447                                  adapter->rx_buffer_len,
 448                                  PCI_DMA_FROMDEVICE);
 449                 buffer_info->dma = 0;
 450
 451                 length = le16_to_cpu(rx_desc->length);
 452
 453                 /*
 454                  * !EOP means multiple descriptors were used to store a single
 455                  * packet, if that's the case we need to toss it.  In fact, we
 456                  * need to toss every packet with the EOP bit clear and the
 457                  * next frame that _does_ have the EOP bit set, as it is by
 458                  * definition only a frame fragment
 459                  */
 460                 if (unlikely(!(status & E1000_RXD_STAT_EOP)))
 461                         adapter->flags2 |= FLAG2_IS_DISCARDING;
 462
 463                 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 464                         /* All receives must fit into a single buffer */
 465                         e_dbg("Receive packet consumed multiple buffers\n");
 466                         /* recycle */
 467                         buffer_info->skb = skb;
 468                         if (status & E1000_RXD_STAT_EOP)
 469                                 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 470                         goto next_desc;
 471                 }
 472
 473                 if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
 474                         /* recycle */
 475                         buffer_info->skb = skb;
 476                         goto next_desc;
 477                 }
 478
 479                 /* adjust length to remove Ethernet CRC */
 480                 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
 481                         length -= 4;
 482
 483                 total_rx_bytes += length;
 484                 total_rx_packets++;
 485
 486                 /*
 487                  * code added for copybreak, this should improve
 488                  * performance for small packets with large amounts
 489                  * of reassembly being done in the stack
 490                  */
 491                 if (length < copybreak) {
 492                         struct sk_buff *new_skb =
 493                             netdev_alloc_skb_ip_align(netdev, length);
 494                         if (new_skb) {
 495                                 skb_copy_to_linear_data_offset(new_skb,
 496                                                                -NET_IP_ALIGN,
 497                                                                (skb->data -
 498                                                                 NET_IP_ALIGN),
 499                                                                (length +
 500                                                                 NET_IP_ALIGN));
 501                                 /* save the skb in buffer_info as good */
 502                                 buffer_info->skb = skb;
 503                                 skb = new_skb;
 504                         }
 505                         /* else just continue with the old one */
 506                 }
 507                 /* end copybreak code */
 508                 skb_put(skb, length);
 509
 510                 /* Receive Checksum Offload */
 511                 e1000_rx_checksum(adapter,
 512                                   (u32)(status) |
 513                                   ((u32)(rx_desc->errors) << 24),
 514                                   le16_to_cpu(rx_desc->csum), skb);
 515
 516                 e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
 517
 518 next_desc:
 519                 rx_desc->status = 0;
 520
 521                 /* return some buffers to hardware, one at a time is too slow */
 522                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
 523                         adapter->alloc_rx_buf(adapter, cleaned_count);
 524                         cleaned_count = 0;
 525                 }
 526
 527                 /* use prefetched values */
 528                 rx_desc = next_rxd;
 529                 buffer_info = next_buffer;
 530         }
 531         rx_ring->next_to_clean = i;
 532
 533         cleaned_count = e1000_desc_unused(rx_ring);
 534         if (cleaned_count)
 535                 adapter->alloc_rx_buf(adapter, cleaned_count);
 536
 537         adapter->total_rx_bytes += total_rx_bytes;
 538         adapter->total_rx_packets += total_rx_packets;
 539         netdev->stats.rx_bytes += total_rx_bytes;
 540         netdev->stats.rx_packets += total_rx_packets;
 541         return cleaned;
 542 }
 543
 544 static void e1000_put_txbuf(struct e1000_adapter *adapter,
 545                              struct e1000_buffer *buffer_info)
 546 {
 547         if (buffer_info->dma) {
 548                 if (buffer_info->mapped_as_page)
 549                         pci_unmap_page(adapter->pdev, buffer_info->dma,
 550                                        buffer_info->length, PCI_DMA_TODEVICE);
 551                 else
 552                         pci_unmap_single(adapter->pdev, buffer_info->dma,
 553                                          buffer_info->length,
 554                                          PCI_DMA_TODEVICE);
 555                 buffer_info->dma = 0;
 556         }
 557         if (buffer_info->skb) {
 558                 dev_kfree_skb_any(buffer_info->skb);
 559                 buffer_info->skb = NULL;
 560         }
 561         buffer_info->time_stamp = 0;
 562 }
 563
 564 static void e1000_print_hw_hang(struct work_struct *work)
 565 {
 566         struct e1000_adapter *adapter = container_of(work,
 567                                                      struct e1000_adapter,
 568                                                      print_hang_task);
 569         struct e1000_ring *tx_ring = adapter->tx_ring;
 570         unsigned int i = tx_ring->next_to_clean;
 571         unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 572         struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
 573         struct e1000_hw *hw = &adapter->hw;
 574         u16 phy_status, phy_1000t_status, phy_ext_status;
 575         u16 pci_status;
 576
 577         e1e_rphy(hw, PHY_STATUS, &phy_status);
 578         e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
 579         e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
 580
 581         pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
 582
 583         /* detected Hardware unit hang */
 584         e_err("Detected Hardware Unit Hang:\n"
 585               "  TDH                  <%x>\n"
 586               "  TDT                  <%x>\n"
 587               "  next_to_use          <%x>\n"
 588               "  next_to_clean        <%x>\n"
 589               "buffer_info[next_to_clean]:\n"
 590               "  time_stamp           <%lx>\n"
 591               "  next_to_watch        <%x>\n"
 592               "  jiffies              <%lx>\n"
 593               "  next_to_watch.status <%x>\n"
 594               "MAC Status             <%x>\n"
 595               "PHY Status             <%x>\n"
 596               "PHY 1000BASE-T Status  <%x>\n"
 597               "PHY Extended Status    <%x>\n"
 598               "PCI Status             <%x>\n",
 599               readl(adapter->hw.hw_addr + tx_ring->head),
 600               readl(adapter->hw.hw_addr + tx_ring->tail),
 601               tx_ring->next_to_use,
 602               tx_ring->next_to_clean,
 603               tx_ring->buffer_info[eop].time_stamp,
 604               eop,
 605               jiffies,
 606               eop_desc->upper.fields.status,
 607               er32(STATUS),
 608               phy_status,
 609               phy_1000t_status,
 610               phy_ext_status,
 611               pci_status);
 612 }
 613
 614 /**
 615  * e1000_clean_tx_irq - Reclaim resources after transmit completes
 616  * @adapter: board private structure
 617  *
 618  * the return value indicates whether actual cleaning was done, there
 619  * is no guarantee that everything was cleaned
 620  **/
 621 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 622 {
 623         struct net_device *netdev = adapter->netdev;
 624         struct e1000_hw *hw = &adapter->hw;
 625         struct e1000_ring *tx_ring = adapter->tx_ring;
 626         struct e1000_tx_desc *tx_desc, *eop_desc;
 627         struct e1000_buffer *buffer_info;
 628         unsigned int i, eop;
 629         unsigned int count = 0;
 630         unsigned int total_tx_bytes = 0, total_tx_packets = 0;
 631
 632         i = tx_ring->next_to_clean;
 633         eop = tx_ring->buffer_info[i].next_to_watch;
 634         eop_desc = E1000_TX_DESC(*tx_ring, eop);
 635
 636         while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 637                (count < tx_ring->count)) {
 638                 bool cleaned = false;
 639                 for (; !cleaned; count++) {
 640                         tx_desc = E1000_TX_DESC(*tx_ring, i);
 641                         buffer_info = &tx_ring->buffer_info[i];
 642                         cleaned = (i == eop);
 643
 644                         if (cleaned) {
 645                                 struct sk_buff *skb = buffer_info->skb;
 646                                 unsigned int segs, bytecount;
 647                                 segs = skb_shinfo(skb)->gso_segs ?: 1;
 648                                 /* multiply data chunks by size of headers */
 649                                 bytecount = ((segs - 1) * skb_headlen(skb)) +
 650                                             skb->len;
 651                                 total_tx_packets += segs;
 652                                 total_tx_bytes += bytecount;
 653                         }
 654
 655                         e1000_put_txbuf(adapter, buffer_info);
 656                         tx_desc->upper.data = 0;
 657
 658                         i++;
 659                         if (i == tx_ring->count)
 660                                 i = 0;
 661                 }
 662
 663                 eop = tx_ring->buffer_info[i].next_to_watch;
 664                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
 665         }
 666
 667         tx_ring->next_to_clean = i;
 668
 669 #define TX_WAKE_THRESHOLD 32
 670         if (count && netif_carrier_ok(netdev) &&
 671             e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
 672                 /* Make sure that anybody stopping the queue after this
 673                  * sees the new next_to_clean.
 674                  */
 675                 smp_mb();
 676
 677                 if (netif_queue_stopped(netdev) &&
 678                     !(test_bit(__E1000_DOWN, &adapter->state))) {
 679                         netif_wake_queue(netdev);
 680                         ++adapter->restart_queue;
 681                 }
 682         }
 683
 684         if (adapter->detect_tx_hung) {
 685                 /*
 686                  * Detect a transmit hang in hardware, this serializes the
 687                  * check with the clearing of time_stamp and movement of i
 688                  */
 689                 adapter->detect_tx_hung = 0;
 690                 if (tx_ring->buffer_info[i].time_stamp &&
 691                     time_after(jiffies, tx_ring->buffer_info[i].time_stamp
 692                                + (adapter->tx_timeout_factor * HZ)) &&
 693                     !(er32(STATUS) & E1000_STATUS_TXOFF)) {
 694                         schedule_work(&adapter->print_hang_task);
 695                         netif_stop_queue(netdev);
 696                 }
 697         }
 698         adapter->total_tx_bytes += total_tx_bytes;
 699         adapter->total_tx_packets += total_tx_packets;
 700         netdev->stats.tx_bytes += total_tx_bytes;
 701         netdev->stats.tx_packets += total_tx_packets;
 702         return (count < tx_ring->count);
 703 }
 704
 705 /**
 706  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
 707  * @adapter: board private structure
 708  *
 709  * the return value indicates whether actual cleaning was done, there
 710  * is no guarantee that everything was cleaned
 711  **/
 712 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 713                                   int *work_done, int work_to_do)
 714 {
 715         struct e1000_hw *hw = &adapter->hw;
 716         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 717         struct net_device *netdev = adapter->netdev;
 718         struct pci_dev *pdev = adapter->pdev;
 719         struct e1000_ring *rx_ring = adapter->rx_ring;
 720         struct e1000_buffer *buffer_info, *next_buffer;
 721         struct e1000_ps_page *ps_page;
 722         struct sk_buff *skb;
 723         unsigned int i, j;
 724         u32 length, staterr;
 725         int cleaned_count = 0;
 726         bool cleaned = 0;
 727         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 728
 729         i = rx_ring->next_to_clean;
 730         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
 731         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
 732         buffer_info = &rx_ring->buffer_info[i];
 733
 734         while (staterr & E1000_RXD_STAT_DD) {
 735                 if (*work_done >= work_to_do)
 736                         break;
 737                 (*work_done)++;
 738                 skb = buffer_info->skb;
 739
 740                 /* in the packet split case this is header only */
 741                 prefetch(skb->data - NET_IP_ALIGN);
 742
 743                 i++;
 744                 if (i == rx_ring->count)
 745                         i = 0;
 746                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
 747                 prefetch(next_rxd);
 748
 749                 next_buffer = &rx_ring->buffer_info[i];
 750
 751                 cleaned = 1;
 752                 cleaned_count++;
 753                 pci_unmap_single(pdev, buffer_info->dma,
 754                                  adapter->rx_ps_bsize0,
 755                                  PCI_DMA_FROMDEVICE);
 756                 buffer_info->dma = 0;
 757
 758                 /* see !EOP comment in other rx routine */
 759                 if (!(staterr & E1000_RXD_STAT_EOP))
 760                         adapter->flags2 |= FLAG2_IS_DISCARDING;
 761
 762                 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 763                         e_dbg("Packet Split buffers didn't pick up the full "
 764                               "packet\n");
 765                         dev_kfree_skb_irq(skb);
 766                         if (staterr & E1000_RXD_STAT_EOP)
 767                                 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 768                         goto next_desc;
 769                 }
 770
 771                 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 772                         dev_kfree_skb_irq(skb);
 773                         goto next_desc;
 774                 }
 775
 776                 length = le16_to_cpu(rx_desc->wb.middle.length0);
 777
 778                 if (!length) {
 779                         e_dbg("Last part of the packet spanning multiple "
 780                               "descriptors\n");
 781                         dev_kfree_skb_irq(skb);
 782                         goto next_desc;
 783                 }
 784
 785                 /* Good Receive */
 786                 skb_put(skb, length);
 787
 788                 {
 789                 /*
 790                  * this looks ugly, but it seems compiler issues make it
 791                  * more efficient than reusing j
 792                  */
 793                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
 794
 795                 /*
 796                  * page alloc/put takes too long and effects small packet
 797                  * throughput, so unsplit small packets and save the alloc/put
 798                  * only valid in softirq (napi) context to call kmap_*
 799                  */
 800                 if (l1 && (l1 <= copybreak) &&
 801                     ((length + l1) <= adapter->rx_ps_bsize0)) {
 802                         u8 *vaddr;
 803
 804                         ps_page = &buffer_info->ps_pages[0];
 805
 806                         /*
 807                          * there is no documentation about how to call
 808                          * kmap_atomic, so we can't hold the mapping
 809                          * very long
 810                          */
 811                         pci_dma_sync_single_for_cpu(pdev, ps_page->dma,
 812                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
 813                         vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
 814                         memcpy(skb_tail_pointer(skb), vaddr, l1);
 815                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
 816                         pci_dma_sync_single_for_device(pdev, ps_page->dma,
 817                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
 818
 819                         /* remove the CRC */
 820                         if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
 821                                 l1 -= 4;
 822
 823                         skb_put(skb, l1);
 824                         goto copydone;
 825                 } /* if */
 826                 }
 827
 828                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
 829                         length = le16_to_cpu(rx_desc->wb.upper.length[j]);
 830                         if (!length)
 831                                 break;
 832
 833                         ps_page = &buffer_info->ps_pages[j];
 834                         pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
 835                                        PCI_DMA_FROMDEVICE);
 836                         ps_page->dma = 0;
 837                         skb_fill_page_desc(skb, j, ps_page->page, 0, length);
 838                         ps_page->page = NULL;
 839                         skb->len += length;
 840                         skb->data_len += length;
 841                         skb->truesize += length;
 842                 }
 843
 844                 /* strip the ethernet crc, problem is we're using pages now so
 845                  * this whole operation can get a little cpu intensive
 846                  */
 847                 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
 848                         pskb_trim(skb, skb->len - 4);
 849
 850 copydone:
 851                 total_rx_bytes += skb->len;
 852                 total_rx_packets++;
 853
 854                 e1000_rx_checksum(adapter, staterr, le16_to_cpu(
 855                         rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
 856
 857                 if (rx_desc->wb.upper.header_status &
 858                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
 859                         adapter->rx_hdr_split++;
 860
 861                 e1000_receive_skb(adapter, netdev, skb,
 862                                   staterr, rx_desc->wb.middle.vlan);
 863
 864 next_desc:
 865                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
 866                 buffer_info->skb = NULL;
 867
 868                 /* return some buffers to hardware, one at a time is too slow */
 869                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
 870                         adapter->alloc_rx_buf(adapter, cleaned_count);
 871                         cleaned_count = 0;
 872                 }
 873
 874                 /* use prefetched values */
 875                 rx_desc = next_rxd;
 876                 buffer_info = next_buffer;
 877
 878                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
 879         }
 880         rx_ring->next_to_clean = i;
 881
 882         cleaned_count = e1000_desc_unused(rx_ring);
 883         if (cleaned_count)
 884                 adapter->alloc_rx_buf(adapter, cleaned_count);
 885
 886         adapter->total_rx_bytes += total_rx_bytes;
 887         adapter->total_rx_packets += total_rx_packets;
 888         netdev->stats.rx_bytes += total_rx_bytes;
 889         netdev->stats.rx_packets += total_rx_packets;
 890         return cleaned;
 891 }
 892
 893 /**
 894  * e1000_consume_page - helper function
 895  **/
 896 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
 897                                u16 length)
 898 {
 899         bi->page = NULL;
 900         skb->len += length;
 901         skb->data_len += length;
 902         skb->truesize += length;
 903 }
 904
 905 /**
 906  * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
 907  * @adapter: board private structure
 908  *
 909  * the return value indicates whether actual cleaning was done, there
 910  * is no guarantee that everything was cleaned
 911  **/
 912
 913 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 914                                      int *work_done, int work_to_do)
 915 {
 916         struct net_device *netdev = adapter->netdev;
 917         struct pci_dev *pdev = adapter->pdev;
 918         struct e1000_ring *rx_ring = adapter->rx_ring;
 919         struct e1000_rx_desc *rx_desc, *next_rxd;
 920         struct e1000_buffer *buffer_info, *next_buffer;
 921         u32 length;
 922         unsigned int i;
 923         int cleaned_count = 0;
 924         bool cleaned = false;
 925         unsigned int total_rx_bytes=0, total_rx_packets=0;
 926
 927         i = rx_ring->next_to_clean;
 928         rx_desc = E1000_RX_DESC(*rx_ring, i);
 929         buffer_info = &rx_ring->buffer_info[i];
 930
 931         while (rx_desc->status & E1000_RXD_STAT_DD) {
 932                 struct sk_buff *skb;
 933                 u8 status;
 934
 935                 if (*work_done >= work_to_do)
 936                         break;
 937                 (*work_done)++;
 938
 939                 status = rx_desc->status;
 940                 skb = buffer_info->skb;
 941                 buffer_info->skb = NULL;
 942
 943                 ++i;
 944                 if (i == rx_ring->count)
 945                         i = 0;
 946                 next_rxd = E1000_RX_DESC(*rx_ring, i);
 947                 prefetch(next_rxd);
 948
 949                 next_buffer = &rx_ring->buffer_info[i];
 950
 951                 cleaned = true;
 952                 cleaned_count++;
 953                 pci_unmap_page(pdev, buffer_info->dma, PAGE_SIZE,
 954                                PCI_DMA_FROMDEVICE);
 955                 buffer_info->dma = 0;
 956
 957                 length = le16_to_cpu(rx_desc->length);
 958
 959                 /* errors is only valid for DD + EOP descriptors */
 960                 if (unlikely((status & E1000_RXD_STAT_EOP) &&
 961                     (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
 962                                 /* recycle both page and skb */
 963                                 buffer_info->skb = skb;
 964                                 /* an error means any chain goes out the window
 965                                  * too */
 966                                 if (rx_ring->rx_skb_top)
 967                                         dev_kfree_skb(rx_ring->rx_skb_top);
 968                                 rx_ring->rx_skb_top = NULL;
 969                                 goto next_desc;
 970                 }
 971
 972 #define rxtop rx_ring->rx_skb_top
 973                 if (!(status & E1000_RXD_STAT_EOP)) {
 974                         /* this descriptor is only the beginning (or middle) */
 975                         if (!rxtop) {
 976                                 /* this is the beginning of a chain */
 977                                 rxtop = skb;
 978                                 skb_fill_page_desc(rxtop, 0, buffer_info->page,
 979                                                    0, length);
 980                         } else {
 981                                 /* this is the middle of a chain */
 982                                 skb_fill_page_desc(rxtop,
 983                                     skb_shinfo(rxtop)->nr_frags,
 984                                     buffer_info->page, 0, length);
 985                                 /* re-use the skb, only consumed the page */
 986                                 buffer_info->skb = skb;
 987                         }
 988                         e1000_consume_page(buffer_info, rxtop, length);
 989                         goto next_desc;
 990                 } else {
 991                         if (rxtop) {
 992                                 /* end of the chain */
 993                                 skb_fill_page_desc(rxtop,
 994                                     skb_shinfo(rxtop)->nr_frags,
 995                                     buffer_info->page, 0, length);
 996                                 /* re-use the current skb, we only consumed the
 997                                  * page */
 998                                 buffer_info->skb = skb;
 999                                 skb = rxtop;
1000                                 rxtop = NULL;
1001                                 e1000_consume_page(buffer_info, skb, length);
1002                         } else {
1003                                 /* no chain, got EOP, this buf is the packet
1004                                  * copybreak to save the put_page/alloc_page */
1005                                 if (length <= copybreak &&
1006                                     skb_tailroom(skb) >= length) {
1007                                         u8 *vaddr;
1008                                         vaddr = kmap_atomic(buffer_info->page,
1009                                                            KM_SKB_DATA_SOFTIRQ);
1010                                         memcpy(skb_tail_pointer(skb), vaddr,
1011                                                length);
1012                                         kunmap_atomic(vaddr,
1013                                                       KM_SKB_DATA_SOFTIRQ);
1014                                         /* re-use the page, so don't erase
1015                                          * buffer_info->page */
1016                                         skb_put(skb, length);
1017                                 } else {
1018                                         skb_fill_page_desc(skb, 0,
1019                                                            buffer_info->page, 0,
1020                                                            length);
1021                                         e1000_consume_page(buffer_info, skb,
1022                                                            length);
1023                                 }
1024                         }
1025                 }
1026
1027                 /* Receive Checksum Offload XXX recompute due to CRC strip? */
1028                 e1000_rx_checksum(adapter,
1029                                   (u32)(status) |
1030                                   ((u32)(rx_desc->errors) << 24),
1031                                   le16_to_cpu(rx_desc->csum), skb);
1032
1033                 /* probably a little skewed due to removing CRC */
1034                 total_rx_bytes += skb->len;
1035                 total_rx_packets++;
1036
1037                 /* eth type trans needs skb->data to point to something */
1038                 if (!pskb_may_pull(skb, ETH_HLEN)) {
1039                         e_err("pskb_may_pull failed.\n");
1040                         dev_kfree_skb(skb);
1041                         goto next_desc;
1042                 }
1043
1044                 e1000_receive_skb(adapter, netdev, skb, status,
1045                                   rx_desc->special);
1046
1047 next_desc:
1048                 rx_desc->status = 0;
1049
1050                 /* return some buffers to hardware, one at a time is too slow */
1051                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1052                         adapter->alloc_rx_buf(adapter, cleaned_count);
1053                         cleaned_count = 0;
1054                 }
1055
1056                 /* use prefetched values */
1057                 rx_desc = next_rxd;
1058                 buffer_info = next_buffer;
1059         }
1060         rx_ring->next_to_clean = i;
1061
1062         cleaned_count = e1000_desc_unused(rx_ring);
1063         if (cleaned_count)
1064                 adapter->alloc_rx_buf(adapter, cleaned_count);
1065
1066         adapter->total_rx_bytes += total_rx_bytes;
1067         adapter->total_rx_packets += total_rx_packets;
1068         netdev->stats.rx_bytes += total_rx_bytes;
1069         netdev->stats.rx_packets += total_rx_packets;
1070         return cleaned;
1071 }
1072
1073 /**
1074  * e1000_clean_rx_ring - Free Rx Buffers per Queue
1075  * @adapter: board private structure
1076  **/
1077 static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
1078 {
1079         struct e1000_ring *rx_ring = adapter->rx_ring;
1080         struct e1000_buffer *buffer_info;
1081         struct e1000_ps_page *ps_page;
1082         struct pci_dev *pdev = adapter->pdev;
1083         unsigned int i, j;
1084
1085         /* Free all the Rx ring sk_buffs */
1086         for (i = 0; i < rx_ring->count; i++) {
1087                 buffer_info = &rx_ring->buffer_info[i];
1088                 if (buffer_info->dma) {
1089                         if (adapter->clean_rx == e1000_clean_rx_irq)
1090                                 pci_unmap_single(pdev, buffer_info->dma,
1091                                                  adapter->rx_buffer_len,
1092                                                  PCI_DMA_FROMDEVICE);
1093                         else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1094                                 pci_unmap_page(pdev, buffer_info->dma,
1095                                                PAGE_SIZE,
1096                                                PCI_DMA_FROMDEVICE);
1097                         else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1098                                 pci_unmap_single(pdev, buffer_info->dma,
1099                                                  adapter->rx_ps_bsize0,
1100                                                  PCI_DMA_FROMDEVICE);
1101                         buffer_info->dma = 0;
1102                 }
1103
1104                 if (buffer_info->page) {
1105                         put_page(buffer_info->page);
1106                         buffer_info->page = NULL;
1107                 }
1108
1109                 if (buffer_info->skb) {
1110                         dev_kfree_skb(buffer_info->skb);
1111                         buffer_info->skb = NULL;
1112                 }
1113
1114                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1115                         ps_page = &buffer_info->ps_pages[j];
1116                         if (!ps_page->page)
1117                                 break;
1118                         pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
1119                                        PCI_DMA_FROMDEVICE);
1120                         ps_page->dma = 0;
1121                         put_page(ps_page->page);
1122                         ps_page->page = NULL;
1123                 }
1124         }
1125
1126         /* there also may be some cached data from a chained receive */
1127         if (rx_ring->rx_skb_top) {
1128                 dev_kfree_skb(rx_ring->rx_skb_top);
1129                 rx_ring->rx_skb_top = NULL;
1130         }
1131
1132         /* Zero out the descriptor ring */
1133         memset(rx_ring->desc, 0, rx_ring->size);
1134
1135         rx_ring->next_to_clean = 0;
1136         rx_ring->next_to_use = 0;
1137         adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1138
1139         writel(0, adapter->hw.hw_addr + rx_ring->head);
1140         writel(0, adapter->hw.hw_addr + rx_ring->tail);
1141 }
1142
1143 static void e1000e_downshift_workaround(struct work_struct *work)
1144 {
1145         struct e1000_adapter *adapter = container_of(work,
1146                                         struct e1000_adapter, downshift_task);
1147
1148         e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1149 }
1150
1151 /**
1152  * e1000_intr_msi - Interrupt Handler
1153  * @irq: interrupt number
1154  * @data: pointer to a network interface device structure
1155  **/
1156 static irqreturn_t e1000_intr_msi(int irq, void *data)
1157 {
1158         struct net_device *netdev = data;
1159         struct e1000_adapter *adapter = netdev_priv(netdev);
1160         struct e1000_hw *hw = &adapter->hw;
1161         u32 icr = er32(ICR);
1162
1163         /*
1164          * read ICR disables interrupts using IAM
1165          */
1166
1167         if (icr & E1000_ICR_LSC) {
1168                 hw->mac.get_link_status = 1;
1169                 /*
1170                  * ICH8 workaround-- Call gig speed drop workaround on cable
1171                  * disconnect (LSC) before accessing any PHY registers
1172                  */
1173                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1174                     (!(er32(STATUS) & E1000_STATUS_LU)))
1175                         schedule_work(&adapter->downshift_task);
1176
1177                 /*
1178                  * 80003ES2LAN workaround-- For packet buffer work-around on
1179                  * link down event; disable receives here in the ISR and reset
1180                  * adapter in watchdog
1181                  */
1182                 if (netif_carrier_ok(netdev) &&
1183                     adapter->flags & FLAG_RX_NEEDS_RESTART) {
1184                         /* disable receives */
1185                         u32 rctl = er32(RCTL);
1186                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1187                         adapter->flags |= FLAG_RX_RESTART_NOW;
1188                 }
1189                 /* guard against interrupt when we're going down */
1190                 if (!test_bit(__E1000_DOWN, &adapter->state))
1191                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1192         }
1193
1194         if (napi_schedule_prep(&adapter->napi)) {
1195                 adapter->total_tx_bytes = 0;
1196                 adapter->total_tx_packets = 0;
1197                 adapter->total_rx_bytes = 0;
1198                 adapter->total_rx_packets = 0;
1199                 __napi_schedule(&adapter->napi);
1200         }
1201
1202         return IRQ_HANDLED;
1203 }
1204
1205 /**
1206  * e1000_intr - Interrupt Handler
1207  * @irq: interrupt number
1208  * @data: pointer to a network interface device structure
1209  **/
1210 static irqreturn_t e1000_intr(int irq, void *data)
1211 {
1212         struct net_device *netdev = data;
1213         struct e1000_adapter *adapter = netdev_priv(netdev);
1214         struct e1000_hw *hw = &adapter->hw;
1215         u32 rctl, icr = er32(ICR);
1216
1217         if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1218                 return IRQ_NONE;  /* Not our interrupt */
1219
1220         /*
1221          * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1222          * not set, then the adapter didn't send an interrupt
1223          */
1224         if (!(icr & E1000_ICR_INT_ASSERTED))
1225                 return IRQ_NONE;
1226
1227         /*
1228          * Interrupt Auto-Mask...upon reading ICR,
1229          * interrupts are masked.  No need for the
1230          * IMC write
1231          */
1232
1233         if (icr & E1000_ICR_LSC) {
1234                 hw->mac.get_link_status = 1;
1235                 /*
1236                  * ICH8 workaround-- Call gig speed drop workaround on cable
1237                  * disconnect (LSC) before accessing any PHY registers
1238                  */
1239                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1240                     (!(er32(STATUS) & E1000_STATUS_LU)))
1241                         schedule_work(&adapter->downshift_task);
1242
1243                 /*
1244                  * 80003ES2LAN workaround--
1245                  * For packet buffer work-around on link down event;
1246                  * disable receives here in the ISR and
1247                  * reset adapter in watchdog
1248                  */
1249                 if (netif_carrier_ok(netdev) &&
1250                     (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1251                         /* disable receives */
1252                         rctl = er32(RCTL);
1253                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1254                         adapter->flags |= FLAG_RX_RESTART_NOW;
1255                 }
1256                 /* guard against interrupt when we're going down */
1257                 if (!test_bit(__E1000_DOWN, &adapter->state))
1258                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1259         }
1260
1261         if (napi_schedule_prep(&adapter->napi)) {
1262                 adapter->total_tx_bytes = 0;
1263                 adapter->total_tx_packets = 0;
1264                 adapter->total_rx_bytes = 0;
1265                 adapter->total_rx_packets = 0;
1266                 __napi_schedule(&adapter->napi);
1267         }
1268
1269         return IRQ_HANDLED;
1270 }
1271
1272 static irqreturn_t e1000_msix_other(int irq, void *data)
1273 {
1274         struct net_device *netdev = data;
1275         struct e1000_adapter *adapter = netdev_priv(netdev);
1276         struct e1000_hw *hw = &adapter->hw;
1277         u32 icr = er32(ICR);
1278
1279         if (!(icr & E1000_ICR_INT_ASSERTED)) {
1280                 if (!test_bit(__E1000_DOWN, &adapter->state))
1281                         ew32(IMS, E1000_IMS_OTHER);
1282                 return IRQ_NONE;
1283         }
1284
1285         if (icr & adapter->eiac_mask)
1286                 ew32(ICS, (icr & adapter->eiac_mask));
1287
1288         if (icr & E1000_ICR_OTHER) {
1289                 if (!(icr & E1000_ICR_LSC))
1290                         goto no_link_interrupt;
1291                 hw->mac.get_link_status = 1;
1292                 /* guard against interrupt when we're going down */
1293                 if (!test_bit(__E1000_DOWN, &adapter->state))
1294                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1295         }
1296
1297 no_link_interrupt:
1298         if (!test_bit(__E1000_DOWN, &adapter->state))
1299                 ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
1300
1301         return IRQ_HANDLED;
1302 }
1303
1304
1305 static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
1306 {
1307         struct net_device *netdev = data;
1308         struct e1000_adapter *adapter = netdev_priv(netdev);
1309         struct e1000_hw *hw = &adapter->hw;
1310         struct e1000_ring *tx_ring = adapter->tx_ring;
1311
1312
1313         adapter->total_tx_bytes = 0;
1314         adapter->total_tx_packets = 0;
1315
1316         if (!e1000_clean_tx_irq(adapter))
1317                 /* Ring was not completely cleaned, so fire another interrupt */
1318                 ew32(ICS, tx_ring->ims_val);
1319
1320         return IRQ_HANDLED;
1321 }
1322
1323 static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
1324 {
1325         struct net_device *netdev = data;
1326         struct e1000_adapter *adapter = netdev_priv(netdev);
1327
1328         /* Write the ITR value calculated at the end of the
1329          * previous interrupt.
1330          */
1331         if (adapter->rx_ring->set_itr) {
1332                 writel(1000000000 / (adapter->rx_ring->itr_val * 256),
1333                        adapter->hw.hw_addr + adapter->rx_ring->itr_register);
1334                 adapter->rx_ring->set_itr = 0;
1335         }
1336
1337         if (napi_schedule_prep(&adapter->napi)) {
1338                 adapter->total_rx_bytes = 0;
1339                 adapter->total_rx_packets = 0;
1340                 __napi_schedule(&adapter->napi);
1341         }
1342         return IRQ_HANDLED;
1343 }
1344
1345 /**
1346  * e1000_configure_msix - Configure MSI-X hardware
1347  *
1348  * e1000_configure_msix sets up the hardware to properly
1349  * generate MSI-X interrupts.
1350  **/
1351 static void e1000_configure_msix(struct e1000_adapter *adapter)
1352 {
1353         struct e1000_hw *hw = &adapter->hw;
1354         struct e1000_ring *rx_ring = adapter->rx_ring;
1355         struct e1000_ring *tx_ring = adapter->tx_ring;
1356         int vector = 0;
1357         u32 ctrl_ext, ivar = 0;
1358
1359         adapter->eiac_mask = 0;
1360
1361         /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1362         if (hw->mac.type == e1000_82574) {
1363                 u32 rfctl = er32(RFCTL);
1364                 rfctl |= E1000_RFCTL_ACK_DIS;
1365                 ew32(RFCTL, rfctl);
1366         }
1367
1368 #define E1000_IVAR_INT_ALLOC_VALID      0x8
1369         /* Configure Rx vector */
1370         rx_ring->ims_val = E1000_IMS_RXQ0;
1371         adapter->eiac_mask |= rx_ring->ims_val;
1372         if (rx_ring->itr_val)
1373                 writel(1000000000 / (rx_ring->itr_val * 256),
1374                        hw->hw_addr + rx_ring->itr_register);
1375         else
1376                 writel(1, hw->hw_addr + rx_ring->itr_register);
1377         ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
1378
1379         /* Configure Tx vector */
1380         tx_ring->ims_val = E1000_IMS_TXQ0;
1381         vector++;
1382         if (tx_ring->itr_val)
1383                 writel(1000000000 / (tx_ring->itr_val * 256),
1384                        hw->hw_addr + tx_ring->itr_register);
1385         else
1386                 writel(1, hw->hw_addr + tx_ring->itr_register);
1387         adapter->eiac_mask |= tx_ring->ims_val;
1388         ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
1389
1390         /* set vector for Other Causes, e.g. link changes */
1391         vector++;
1392         ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
1393         if (rx_ring->itr_val)
1394                 writel(1000000000 / (rx_ring->itr_val * 256),
1395                        hw->hw_addr + E1000_EITR_82574(vector));
1396         else
1397                 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
1398
1399         /* Cause Tx interrupts on every write back */
1400         ivar |= (1 << 31);
1401
1402         ew32(IVAR, ivar);
1403
1404         /* enable MSI-X PBA support */
1405         ctrl_ext = er32(CTRL_EXT);
1406         ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
1407
1408         /* Auto-Mask Other interrupts upon ICR read */
1409 #define E1000_EIAC_MASK_82574   0x01F00000
1410         ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
1411         ctrl_ext |= E1000_CTRL_EXT_EIAME;
1412         ew32(CTRL_EXT, ctrl_ext);
1413         e1e_flush();
1414 }
1415
1416 void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
1417 {
1418         if (adapter->msix_entries) {
1419                 pci_disable_msix(adapter->pdev);
1420                 kfree(adapter->msix_entries);
1421                 adapter->msix_entries = NULL;
1422         } else if (adapter->flags & FLAG_MSI_ENABLED) {
1423                 pci_disable_msi(adapter->pdev);
1424                 adapter->flags &= ~FLAG_MSI_ENABLED;
1425         }
1426
1427         return;
1428 }
1429
1430 /**
1431  * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
1432  *
1433  * Attempt to configure interrupts using the best available
1434  * capabilities of the hardware and kernel.
1435  **/
1436 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
1437 {
1438         int err;
1439         int numvecs, i;
1440
1441
1442         switch (adapter->int_mode) {
1443         case E1000E_INT_MODE_MSIX:
1444                 if (adapter->flags & FLAG_HAS_MSIX) {
1445                         numvecs = 3; /* RxQ0, TxQ0 and other */
1446                         adapter->msix_entries = kcalloc(numvecs,
1447                                                       sizeof(struct msix_entry),
1448                                                       GFP_KERNEL);
1449                         if (adapter->msix_entries) {
1450                                 for (i = 0; i < numvecs; i++)
1451                                         adapter->msix_entries[i].entry = i;
1452
1453                                 err = pci_enable_msix(adapter->pdev,
1454                                                       adapter->msix_entries,
1455                                                       numvecs);
1456                                 if (err == 0)
1457                                         return;
1458                         }
1459                         /* MSI-X failed, so fall through and try MSI */
1460                         e_err("Failed to initialize MSI-X interrupts.  "
1461                               "Falling back to MSI interrupts.\n");
1462                         e1000e_reset_interrupt_capability(adapter);
1463                 }
1464                 adapter->int_mode = E1000E_INT_MODE_MSI;
1465                 /* Fall through */
1466         case E1000E_INT_MODE_MSI:
1467                 if (!pci_enable_msi(adapter->pdev)) {
1468                         adapter->flags |= FLAG_MSI_ENABLED;
1469                 } else {
1470                         adapter->int_mode = E1000E_INT_MODE_LEGACY;
1471                         e_err("Failed to initialize MSI interrupts.  Falling "
1472                               "back to legacy interrupts.\n");
1473                 }
1474                 /* Fall through */
1475         case E1000E_INT_MODE_LEGACY:
1476                 /* Don't do anything; this is the system default */
1477                 break;
1478         }
1479
1480         return;
1481 }
1482
1483 /**
1484  * e1000_request_msix - Initialize MSI-X interrupts
1485  *
1486  * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
1487  * kernel.
1488  **/
1489 static int e1000_request_msix(struct e1000_adapter *adapter)
1490 {
1491         struct net_device *netdev = adapter->netdev;
1492         int err = 0, vector = 0;
1493
1494         if (strlen(netdev->name) < (IFNAMSIZ - 5))
1495                 sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
1496         else
1497                 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
1498         err = request_irq(adapter->msix_entries[vector].vector,
1499                           e1000_intr_msix_rx, 0, adapter->rx_ring->name,
1500                           netdev);
1501         if (err)
1502                 goto out;
1503         adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
1504         adapter->rx_ring->itr_val = adapter->itr;
1505         vector++;
1506
1507         if (strlen(netdev->name) < (IFNAMSIZ - 5))
1508                 sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
1509         else
1510                 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
1511         err = request_irq(adapter->msix_entries[vector].vector,
1512                           e1000_intr_msix_tx, 0, adapter->tx_ring->name,
1513                           netdev);
1514         if (err)
1515                 goto out;
1516         adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
1517         adapter->tx_ring->itr_val = adapter->itr;
1518         vector++;
1519
1520         err = request_irq(adapter->msix_entries[vector].vector,
1521                           e1000_msix_other, 0, netdev->name, netdev);
1522         if (err)
1523                 goto out;
1524
1525         e1000_configure_msix(adapter);
1526         return 0;
1527 out:
1528         return err;
1529 }
1530
1531 /**
1532  * e1000_request_irq - initialize interrupts
1533  *
1534  * Attempts to configure interrupts using the best available
1535  * capabilities of the hardware and kernel.
1536  **/
1537 static int e1000_request_irq(struct e1000_adapter *adapter)
1538 {
1539         struct net_device *netdev = adapter->netdev;
1540         int err;
1541
1542         if (adapter->msix_entries) {
1543                 err = e1000_request_msix(adapter);
1544                 if (!err)
1545                         return err;
1546                 /* fall back to MSI */
1547                 e1000e_reset_interrupt_capability(adapter);
1548                 adapter->int_mode = E1000E_INT_MODE_MSI;
1549                 e1000e_set_interrupt_capability(adapter);
1550         }
1551         if (adapter->flags & FLAG_MSI_ENABLED) {
1552                 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
1553                                   netdev->name, netdev);
1554                 if (!err)
1555                         return err;
1556
1557                 /* fall back to legacy interrupt */
1558                 e1000e_reset_interrupt_capability(adapter);
1559                 adapter->int_mode = E1000E_INT_MODE_LEGACY;
1560         }
1561
1562         err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
1563                           netdev->name, netdev);
1564         if (err)
1565                 e_err("Unable to allocate interrupt, Error: %d\n", err);
1566
1567         return err;
1568 }
1569
1570 static void e1000_free_irq(struct e1000_adapter *adapter)
1571 {
1572         struct net_device *netdev = adapter->netdev;
1573
1574         if (adapter->msix_entries) {
1575                 int vector = 0;
1576
1577                 free_irq(adapter->msix_entries[vector].vector, netdev);
1578                 vector++;
1579
1580                 free_irq(adapter->msix_entries[vector].vector, netdev);
1581                 vector++;
1582
1583                 /* Other Causes interrupt vector */
1584                 free_irq(adapter->msix_entries[vector].vector, netdev);
1585                 return;
1586         }
1587
1588         free_irq(adapter->pdev->irq, netdev);
1589 }
1590
1591 /**
1592  * e1000_irq_disable - Mask off interrupt generation on the NIC
1593  **/
1594 static void e1000_irq_disable(struct e1000_adapter *adapter)
1595 {
1596         struct e1000_hw *hw = &adapter->hw;
1597
1598         ew32(IMC, ~0);
1599         if (adapter->msix_entries)
1600                 ew32(EIAC_82574, 0);
1601         e1e_flush();
1602         synchronize_irq(adapter->pdev->irq);
1603 }
1604
1605 /**
1606  * e1000_irq_enable - Enable default interrupt generation settings
1607  **/
1608 static void e1000_irq_enable(struct e1000_adapter *adapter)
1609 {
1610         struct e1000_hw *hw = &adapter->hw;
1611
1612         if (adapter->msix_entries) {
1613                 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
1614                 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
1615         } else {
1616                 ew32(IMS, IMS_ENABLE_MASK);
1617         }
1618         e1e_flush();
1619 }
1620
1621 /**
1622  * e1000_get_hw_control - get control of the h/w from f/w
1623  * @adapter: address of board private structure
1624  *
1625  * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1626  * For ASF and Pass Through versions of f/w this means that
1627  * the driver is loaded. For AMT version (only with 82573)
1628  * of the f/w this means that the network i/f is open.
1629  **/
1630 static void e1000_get_hw_control(struct e1000_adapter *adapter)
1631 {
1632         struct e1000_hw *hw = &adapter->hw;
1633         u32 ctrl_ext;
1634         u32 swsm;
1635
1636         /* Let firmware know the driver has taken over */
1637         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1638                 swsm = er32(SWSM);
1639                 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
1640         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1641                 ctrl_ext = er32(CTRL_EXT);
1642                 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1643         }
1644 }
1645
1646 /**
1647  * e1000_release_hw_control - release control of the h/w to f/w
1648  * @adapter: address of board private structure
1649  *
1650  * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1651  * For ASF and Pass Through versions of f/w this means that the
1652  * driver is no longer loaded. For AMT version (only with 82573) i
1653  * of the f/w this means that the network i/f is closed.
1654  *
1655  **/
1656 static void e1000_release_hw_control(struct e1000_adapter *adapter)
1657 {
1658         struct e1000_hw *hw = &adapter->hw;
1659         u32 ctrl_ext;
1660         u32 swsm;
1661
1662         /* Let firmware taken over control of h/w */
1663         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1664                 swsm = er32(SWSM);
1665                 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
1666         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1667                 ctrl_ext = er32(CTRL_EXT);
1668                 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1669         }
1670 }
1671
1672 /**
1673  * @e1000_alloc_ring - allocate memory for a ring structure
1674  **/
1675 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
1676                                 struct e1000_ring *ring)
1677 {
1678         struct pci_dev *pdev = adapter->pdev;
1679
1680         ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
1681                                         GFP_KERNEL);
1682         if (!ring->desc)
1683                 return -ENOMEM;
1684
1685         return 0;
1686 }
1687
1688 /**
1689  * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
1690  * @adapter: board private structure
1691  *
1692  * Return 0 on success, negative on failure
1693  **/
1694 int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
1695 {
1696         struct e1000_ring *tx_ring = adapter->tx_ring;
1697         int err = -ENOMEM, size;
1698
1699         size = sizeof(struct e1000_buffer) * tx_ring->count;
1700         tx_ring->buffer_info = vmalloc(size);
1701         if (!tx_ring->buffer_info)
1702                 goto err;
1703         memset(tx_ring->buffer_info, 0, size);
1704
1705         /* round up to nearest 4K */
1706         tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
1707         tx_ring->size = ALIGN(tx_ring->size, 4096);
1708
1709         err = e1000_alloc_ring_dma(adapter, tx_ring);
1710         if (err)
1711                 goto err;
1712
1713         tx_ring->next_to_use = 0;
1714         tx_ring->next_to_clean = 0;
1715
1716         return 0;
1717 err:
1718         vfree(tx_ring->buffer_info);
1719         e_err("Unable to allocate memory for the transmit descriptor ring\n");
1720         return err;
1721 }
1722
1723 /**
1724  * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
1725  * @adapter: board private structure
1726  *
1727  * Returns 0 on success, negative on failure
1728  **/
1729 int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
1730 {
1731         struct e1000_ring *rx_ring = adapter->rx_ring;
1732         struct e1000_buffer *buffer_info;
1733         int i, size, desc_len, err = -ENOMEM;
1734
1735         size = sizeof(struct e1000_buffer) * rx_ring->count;
1736         rx_ring->buffer_info = vmalloc(size);
1737         if (!rx_ring->buffer_info)
1738                 goto err;
1739         memset(rx_ring->buffer_info, 0, size);
1740
1741         for (i = 0; i < rx_ring->count; i++) {
1742                 buffer_info = &rx_ring->buffer_info[i];
1743                 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
1744                                                 sizeof(struct e1000_ps_page),
1745                                                 GFP_KERNEL);
1746                 if (!buffer_info->ps_pages)
1747                         goto err_pages;
1748         }
1749
1750         desc_len = sizeof(union e1000_rx_desc_packet_split);
1751
1752         /* Round up to nearest 4K */
1753         rx_ring->size = rx_ring->count * desc_len;
1754         rx_ring->size = ALIGN(rx_ring->size, 4096);
1755
1756         err = e1000_alloc_ring_dma(adapter, rx_ring);
1757         if (err)
1758                 goto err_pages;
1759
1760         rx_ring->next_to_clean = 0;
1761         rx_ring->next_to_use = 0;
1762         rx_ring->rx_skb_top = NULL;
1763
1764         return 0;
1765
1766 err_pages:
1767         for (i = 0; i < rx_ring->count; i++) {
1768                 buffer_info = &rx_ring->buffer_info[i];
1769                 kfree(buffer_info->ps_pages);
1770         }
1771 err:
1772         vfree(rx_ring->buffer_info);
1773         e_err("Unable to allocate memory for the transmit descriptor ring\n");
1774         return err;
1775 }
1776
1777 /**
1778  * e1000_clean_tx_ring - Free Tx Buffers
1779  * @adapter: board private structure
1780  **/
1781 static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
1782 {
1783         struct e1000_ring *tx_ring = adapter->tx_ring;
1784         struct e1000_buffer *buffer_info;
1785         unsigned long size;
1786         unsigned int i;
1787
1788         for (i = 0; i < tx_ring->count; i++) {
1789                 buffer_info = &tx_ring->buffer_info[i];
1790                 e1000_put_txbuf(adapter, buffer_info);
1791         }
1792
1793         size = sizeof(struct e1000_buffer) * tx_ring->count;
1794         memset(tx_ring->buffer_info, 0, size);
1795
1796         memset(tx_ring->desc, 0, tx_ring->size);
1797
1798         tx_ring->next_to_use = 0;
1799         tx_ring->next_to_clean = 0;
1800
1801         writel(0, adapter->hw.hw_addr + tx_ring->head);
1802         writel(0, adapter->hw.hw_addr + tx_ring->tail);
1803 }
1804
1805 /**
1806  * e1000e_free_tx_resources - Free Tx Resources per Queue
1807  * @adapter: board private structure
1808  *
1809  * Free all transmit software resources
1810  **/
1811 void e1000e_free_tx_resources(struct e1000_adapter *adapter)
1812 {
1813         struct pci_dev *pdev = adapter->pdev;
1814         struct e1000_ring *tx_ring = adapter->tx_ring;
1815
1816         e1000_clean_tx_ring(adapter);
1817
1818         vfree(tx_ring->buffer_info);
1819         tx_ring->buffer_info = NULL;
1820
1821         dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
1822                           tx_ring->dma);
1823         tx_ring->desc = NULL;
1824 }
1825
1826 /**
1827  * e1000e_free_rx_resources - Free Rx Resources
1828  * @adapter: board private structure
1829  *
1830  * Free all receive software resources
1831  **/
1832
1833 void e1000e_free_rx_resources(struct e1000_adapter *adapter)
1834 {
1835         struct pci_dev *pdev = adapter->pdev;
1836         struct e1000_ring *rx_ring = adapter->rx_ring;
1837         int i;
1838
1839         e1000_clean_rx_ring(adapter);
1840
1841         for (i = 0; i < rx_ring->count; i++) {
1842                 kfree(rx_ring->buffer_info[i].ps_pages);
1843         }
1844
1845         vfree(rx_ring->buffer_info);
1846         rx_ring->buffer_info = NULL;
1847
1848         dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
1849                           rx_ring->dma);
1850         rx_ring->desc = NULL;
1851 }
1852
1853 /**
1854  * e1000_update_itr - update the dynamic ITR value based on statistics
1855  * @adapter: pointer to adapter
1856  * @itr_setting: current adapter->itr
1857  * @packets: the number of packets during this measurement interval
1858  * @bytes: the number of bytes during this measurement interval
1859  *
1860  *      Stores a new ITR value based on packets and byte
1861  *      counts during the last interrupt.  The advantage of per interrupt
1862  *      computation is faster updates and more accurate ITR for the current
1863  *      traffic pattern.  Constants in this function were computed
1864  *      based on theoretical maximum wire speed and thresholds were set based
1865  *      on testing data as well as attempting to minimize response time
1866  *      while increasing bulk throughput.  This functionality is controlled
1867  *      by the InterruptThrottleRate module parameter.
1868  **/
1869 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
1870                                      u16 itr_setting, int packets,
1871                                      int bytes)
1872 {
1873         unsigned int retval = itr_setting;
1874
1875         if (packets == 0)
1876                 goto update_itr_done;
1877
1878         switch (itr_setting) {
1879         case lowest_latency:
1880                 /* handle TSO and jumbo frames */
1881                 if (bytes/packets > 8000)
1882                         retval = bulk_latency;
1883                 else if ((packets < 5) && (bytes > 512)) {
1884                         retval = low_latency;
1885                 }
1886                 break;
1887         case low_latency:  /* 50 usec aka 20000 ints/s */
1888                 if (bytes > 10000) {
1889                         /* this if handles the TSO accounting */
1890                         if (bytes/packets > 8000) {
1891                                 retval = bulk_latency;
1892                         } else if ((packets < 10) || ((bytes/packets) > 1200)) {
1893                                 retval = bulk_latency;
1894                         } else if ((packets > 35)) {
1895                                 retval = lowest_latency;
1896                         }
1897                 } else if (bytes/packets > 2000) {
1898                         retval = bulk_latency;
1899                 } else if (packets <= 2 && bytes < 512) {
1900                         retval = lowest_latency;
1901                 }
1902                 break;
1903         case bulk_latency: /* 250 usec aka 4000 ints/s */
1904                 if (bytes > 25000) {
1905                         if (packets > 35) {
1906                                 retval = low_latency;
1907                         }
1908                 } else if (bytes < 6000) {
1909                         retval = low_latency;
1910                 }
1911                 break;
1912         }
1913
1914 update_itr_done:
1915         return retval;
1916 }
1917
1918 static void e1000_set_itr(struct e1000_adapter *adapter)
1919 {
1920         struct e1000_hw *hw = &adapter->hw;
1921         u16 current_itr;
1922         u32 new_itr = adapter->itr;
1923
1924         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
1925         if (adapter->link_speed != SPEED_1000) {
1926                 current_itr = 0;
1927                 new_itr = 4000;
1928                 goto set_itr_now;
1929         }
1930
1931         adapter->tx_itr = e1000_update_itr(adapter,
1932                                     adapter->tx_itr,
1933                                     adapter->total_tx_packets,
1934                                     adapter->total_tx_bytes);
1935         /* conservative mode (itr 3) eliminates the lowest_latency setting */
1936         if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
1937                 adapter->tx_itr = low_latency;
1938
1939         adapter->rx_itr = e1000_update_itr(adapter,
1940                                     adapter->rx_itr,
1941                                     adapter->total_rx_packets,
1942                                     adapter->total_rx_bytes);
1943         /* conservative mode (itr 3) eliminates the lowest_latency setting */
1944         if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
1945                 adapter->rx_itr = low_latency;
1946
1947         current_itr = max(adapter->rx_itr, adapter->tx_itr);
1948
1949         switch (current_itr) {
1950         /* counts and packets in update_itr are dependent on these numbers */
1951         case lowest_latency:
1952                 new_itr = 70000;
1953                 break;
1954         case low_latency:
1955                 new_itr = 20000; /* aka hwitr = ~200 */
1956                 break;
1957         case bulk_latency:
1958                 new_itr = 4000;
1959                 break;
1960         default:
1961                 break;
1962         }
1963
1964 set_itr_now:
1965         if (new_itr != adapter->itr) {
1966                 /*
1967                  * this attempts to bias the interrupt rate towards Bulk
1968                  * by adding intermediate steps when interrupt rate is
1969                  * increasing
1970                  */
1971                 new_itr = new_itr > adapter->itr ?
1972                              min(adapter->itr + (new_itr >> 2), new_itr) :
1973                              new_itr;
1974                 adapter->itr = new_itr;
1975                 adapter->rx_ring->itr_val = new_itr;
1976                 if (adapter->msix_entries)
1977                         adapter->rx_ring->set_itr = 1;
1978                 else
1979                         ew32(ITR, 1000000000 / (new_itr * 256));
1980         }
1981 }
1982
1983 /**
1984  * e1000_alloc_queues - Allocate memory for all rings
1985  * @adapter: board private structure to initialize
1986  **/
1987 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
1988 {
1989         adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
1990         if (!adapter->tx_ring)
1991                 goto err;
1992
1993         adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
1994         if (!adapter->rx_ring)
1995                 goto err;
1996
1997         return 0;
1998 err:
1999         e_err("Unable to allocate memory for queues\n");
2000         kfree(adapter->rx_ring);
2001         kfree(adapter->tx_ring);
2002         return -ENOMEM;
2003 }
2004
2005 /**
2006  * e1000_clean - NAPI Rx polling callback
2007  * @napi: struct associated with this polling callback
2008  * @budget: amount of packets driver is allowed to process this poll
2009  **/
2010 static int e1000_clean(struct napi_struct *napi, int budget)
2011 {
2012         struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
2013         struct e1000_hw *hw = &adapter->hw;
2014         struct net_device *poll_dev = adapter->netdev;
2015         int tx_cleaned = 1, work_done = 0;
2016
2017         adapter = netdev_priv(poll_dev);
2018
2019         if (adapter->msix_entries &&
2020             !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2021                 goto clean_rx;
2022
2023         tx_cleaned = e1000_clean_tx_irq(adapter);
2024
2025 clean_rx:
2026         adapter->clean_rx(adapter, &work_done, budget);
2027
2028         if (!tx_cleaned)
2029                 work_done = budget;
2030
2031         /* If budget not fully consumed, exit the polling mode */
2032         if (work_done < budget) {
2033                 if (adapter->itr_setting & 3)
2034                         e1000_set_itr(adapter);
2035                 napi_complete(napi);
2036                 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2037                         if (adapter->msix_entries)
2038                                 ew32(IMS, adapter->rx_ring->ims_val);
2039                         else
2040                                 e1000_irq_enable(adapter);
2041                 }
2042         }
2043
2044         return work_done;
2045 }
2046
2047 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
2048 {
2049         struct e1000_adapter *adapter = netdev_priv(netdev);
2050         struct e1000_hw *hw = &adapter->hw;
2051         u32 vfta, index;
2052
2053         /* don't update vlan cookie if already programmed */
2054         if ((adapter->hw.mng_cookie.status &
2055              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2056             (vid == adapter->mng_vlan_id))
2057                 return;
2058
2059         /* add VID to filter table */
2060         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2061                 index = (vid >> 5) & 0x7F;
2062                 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2063                 vfta |= (1 << (vid & 0x1F));
2064                 hw->mac.ops.write_vfta(hw, index, vfta);
2065         }
2066 }
2067
2068 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
2069 {
2070         struct e1000_adapter *adapter = netdev_priv(netdev);
2071         struct e1000_hw *hw = &adapter->hw;
2072         u32 vfta, index;
2073
2074         if (!test_bit(__E1000_DOWN, &adapter->state))
2075                 e1000_irq_disable(adapter);
2076         vlan_group_set_device(adapter->vlgrp, vid, NULL);
2077
2078         if (!test_bit(__E1000_DOWN, &adapter->state))
2079                 e1000_irq_enable(adapter);
2080
2081         if ((adapter->hw.mng_cookie.status &
2082              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2083             (vid == adapter->mng_vlan_id)) {
2084                 /* release control to f/w */
2085                 e1000_release_hw_control(adapter);
2086                 return;
2087         }
2088
2089         /* remove VID from filter table */
2090         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2091                 index = (vid >> 5) & 0x7F;
2092                 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2093                 vfta &= ~(1 << (vid & 0x1F));
2094                 hw->mac.ops.write_vfta(hw, index, vfta);
2095         }
2096 }
2097
2098 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2099 {
2100         struct net_device *netdev = adapter->netdev;
2101         u16 vid = adapter->hw.mng_cookie.vlan_id;
2102         u16 old_vid = adapter->mng_vlan_id;
2103
2104         if (!adapter->vlgrp)
2105                 return;
2106
2107         if (!vlan_group_get_device(adapter->vlgrp, vid)) {
2108                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2109                 if (adapter->hw.mng_cookie.status &
2110                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2111                         e1000_vlan_rx_add_vid(netdev, vid);
2112                         adapter->mng_vlan_id = vid;
2113                 }
2114
2115                 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
2116                                 (vid != old_vid) &&
2117                     !vlan_group_get_device(adapter->vlgrp, old_vid))
2118                         e1000_vlan_rx_kill_vid(netdev, old_vid);
2119         } else {
2120                 adapter->mng_vlan_id = vid;
2121         }
2122 }
2123
2124
2125 static void e1000_vlan_rx_register(struct net_device *netdev,
2126                                    struct vlan_group *grp)
2127 {
2128         struct e1000_adapter *adapter = netdev_priv(netdev);
2129         struct e1000_hw *hw = &adapter->hw;
2130         u32 ctrl, rctl;
2131
2132         if (!test_bit(__E1000_DOWN, &adapter->state))
2133                 e1000_irq_disable(adapter);
2134         adapter->vlgrp = grp;
2135
2136         if (grp) {
2137                 /* enable VLAN tag insert/strip */
2138                 ctrl = er32(CTRL);
2139                 ctrl |= E1000_CTRL_VME;
2140                 ew32(CTRL, ctrl);
2141
2142                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2143                         /* enable VLAN receive filtering */
2144                         rctl = er32(RCTL);
2145                         rctl &= ~E1000_RCTL_CFIEN;
2146                         ew32(RCTL, rctl);
2147                         e1000_update_mng_vlan(adapter);
2148                 }
2149         } else {
2150                 /* disable VLAN tag insert/strip */
2151                 ctrl = er32(CTRL);
2152                 ctrl &= ~E1000_CTRL_VME;
2153                 ew32(CTRL, ctrl);
2154
2155                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2156                         if (adapter->mng_vlan_id !=
2157                             (u16)E1000_MNG_VLAN_NONE) {
2158                                 e1000_vlan_rx_kill_vid(netdev,
2159                                                        adapter->mng_vlan_id);
2160                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2161                         }
2162                 }
2163         }
2164
2165         if (!test_bit(__E1000_DOWN, &adapter->state))
2166                 e1000_irq_enable(adapter);
2167 }
2168
2169 static void e1000_restore_vlan(struct e1000_adapter *adapter)
2170 {
2171         u16 vid;
2172
2173         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
2174
2175         if (!adapter->vlgrp)
2176                 return;
2177
2178         for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
2179                 if (!vlan_group_get_device(adapter->vlgrp, vid))
2180                         continue;
2181                 e1000_vlan_rx_add_vid(adapter->netdev, vid);
2182         }
2183 }
2184
2185 static void e1000_init_manageability(struct e1000_adapter *adapter)
2186 {
2187         struct e1000_hw *hw = &adapter->hw;
2188         u32 manc, manc2h;
2189
2190         if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2191                 return;
2192
2193         manc = er32(MANC);
2194
2195         /*
2196          * enable receiving management packets to the host. this will probably
2197          * generate destination unreachable messages from the host OS, but
2198          * the packets will be handled on SMBUS
2199          */
2200         manc |= E1000_MANC_EN_MNG2HOST;
2201         manc2h = er32(MANC2H);
2202 #define E1000_MNG2HOST_PORT_623 (1 << 5)
2203 #define E1000_MNG2HOST_PORT_664 (1 << 6)
2204         manc2h |= E1000_MNG2HOST_PORT_623;
2205         manc2h |= E1000_MNG2HOST_PORT_664;
2206         ew32(MANC2H, manc2h);
2207         ew32(MANC, manc);
2208 }
2209
2210 /**
2211  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
2212  * @adapter: board private structure
2213  *
2214  * Configure the Tx unit of the MAC after a reset.
2215  **/
2216 static void e1000_configure_tx(struct e1000_adapter *adapter)
2217 {
2218         struct e1000_hw *hw = &adapter->hw;
2219         struct e1000_ring *tx_ring = adapter->tx_ring;
2220         u64 tdba;
2221         u32 tdlen, tctl, tipg, tarc;
2222         u32 ipgr1, ipgr2;
2223
2224         /* Setup the HW Tx Head and Tail descriptor pointers */
2225         tdba = tx_ring->dma;
2226         tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2227         ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
2228         ew32(TDBAH, (tdba >> 32));
2229         ew32(TDLEN, tdlen);
2230         ew32(TDH, 0);
2231         ew32(TDT, 0);
2232         tx_ring->head = E1000_TDH;
2233         tx_ring->tail = E1000_TDT;
2234
2235         /* Set the default values for the Tx Inter Packet Gap timer */
2236         tipg = DEFAULT_82543_TIPG_IPGT_COPPER;          /*  8  */
2237         ipgr1 = DEFAULT_82543_TIPG_IPGR1;               /*  8  */
2238         ipgr2 = DEFAULT_82543_TIPG_IPGR2;               /*  6  */
2239
2240         if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
2241                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /*  7  */
2242
2243         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
2244         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
2245         ew32(TIPG, tipg);
2246
2247         /* Set the Tx Interrupt Delay register */
2248         ew32(TIDV, adapter->tx_int_delay);
2249         /* Tx irq moderation */
2250         ew32(TADV, adapter->tx_abs_int_delay);
2251
2252         /* Program the Transmit Control Register */
2253         tctl = er32(TCTL);
2254         tctl &= ~E1000_TCTL_CT;
2255         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2256                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2257
2258         if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2259                 tarc = er32(TARC(0));
2260                 /*
2261                  * set the speed mode bit, we'll clear it if we're not at
2262                  * gigabit link later
2263                  */
2264 #define SPEED_MODE_BIT (1 << 21)
2265                 tarc |= SPEED_MODE_BIT;
2266                 ew32(TARC(0), tarc);
2267         }
2268
2269         /* errata: program both queues to unweighted RR */
2270         if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2271                 tarc = er32(TARC(0));
2272                 tarc |= 1;
2273                 ew32(TARC(0), tarc);
2274                 tarc = er32(TARC(1));
2275                 tarc |= 1;
2276                 ew32(TARC(1), tarc);
2277         }
2278
2279         /* Setup Transmit Descriptor Settings for eop descriptor */
2280         adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
2281
2282         /* only set IDE if we are delaying interrupts using the timers */
2283         if (adapter->tx_int_delay)
2284                 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
2285
2286         /* enable Report Status bit */
2287         adapter->txd_cmd |= E1000_TXD_CMD_RS;
2288
2289         ew32(TCTL, tctl);
2290
2291         e1000e_config_collision_dist(hw);
2292
2293         adapter->tx_queue_len = adapter->netdev->tx_queue_len;
2294 }
2295
2296 /**
2297  * e1000_setup_rctl - configure the receive control registers
2298  * @adapter: Board private structure
2299  **/
2300 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
2301                            (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
2302 static void e1000_setup_rctl(struct e1000_adapter *adapter)
2303 {
2304         struct e1000_hw *hw = &adapter->hw;
2305         u32 rctl, rfctl;
2306         u32 psrctl = 0;
2307         u32 pages = 0;
2308
2309         /* Program MC offset vector base */
2310         rctl = er32(RCTL);
2311         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2312         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
2313                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
2314                 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2315
2316         /* Do not Store bad packets */
2317         rctl &= ~E1000_RCTL_SBP;
2318
2319         /* Enable Long Packet receive */
2320         if (adapter->netdev->mtu <= ETH_DATA_LEN)
2321                 rctl &= ~E1000_RCTL_LPE;
2322         else
2323                 rctl |= E1000_RCTL_LPE;
2324
2325         /* Some systems expect that the CRC is included in SMBUS traffic. The
2326          * hardware strips the CRC before sending to both SMBUS (BMC) and to
2327          * host memory when this is enabled
2328          */
2329         if (adapter->flags2 & FLAG2_CRC_STRIPPING)
2330                 rctl |= E1000_RCTL_SECRC;
2331
2332         /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
2333         if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
2334                 u16 phy_data;
2335
2336                 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
2337                 phy_data &= 0xfff8;
2338                 phy_data |= (1 << 2);
2339                 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
2340
2341                 e1e_rphy(hw, 22, &phy_data);
2342                 phy_data &= 0x0fff;
2343                 phy_data |= (1 << 14);
2344                 e1e_wphy(hw, 0x10, 0x2823);
2345                 e1e_wphy(hw, 0x11, 0x0003);
2346                 e1e_wphy(hw, 22, phy_data);
2347         }
2348
2349         /* Setup buffer sizes */
2350         rctl &= ~E1000_RCTL_SZ_4096;
2351         rctl |= E1000_RCTL_BSEX;
2352         switch (adapter->rx_buffer_len) {
2353         case 2048:
2354         default:
2355                 rctl |= E1000_RCTL_SZ_2048;
2356                 rctl &= ~E1000_RCTL_BSEX;
2357                 break;
2358         case 4096:
2359                 rctl |= E1000_RCTL_SZ_4096;
2360                 break;
2361         case 8192:
2362                 rctl |= E1000_RCTL_SZ_8192;
2363                 break;
2364         case 16384:
2365                 rctl |= E1000_RCTL_SZ_16384;
2366                 break;
2367         }
2368
2369         /*
2370          * 82571 and greater support packet-split where the protocol
2371          * header is placed in skb->data and the packet data is
2372          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
2373          * In the case of a non-split, skb->data is linearly filled,
2374          * followed by the page buffers.  Therefore, skb->data is
2375          * sized to hold the largest protocol header.
2376          *
2377          * allocations using alloc_page take too long for regular MTU
2378          * so only enable packet split for jumbo frames
2379          *
2380          * Using pages when the page size is greater than 16k wastes
2381          * a lot of memory, since we allocate 3 pages at all times
2382          * per packet.
2383          */
2384         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
2385         if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
2386             (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
2387                 adapter->rx_ps_pages = pages;
2388         else
2389                 adapter->rx_ps_pages = 0;
2390
2391         if (adapter->rx_ps_pages) {
2392                 /* Configure extra packet-split registers */
2393                 rfctl = er32(RFCTL);
2394                 rfctl |= E1000_RFCTL_EXTEN;
2395                 /*
2396                  * disable packet split support for IPv6 extension headers,
2397                  * because some malformed IPv6 headers can hang the Rx
2398                  */
2399                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
2400                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
2401
2402                 ew32(RFCTL, rfctl);
2403
2404                 /* Enable Packet split descriptors */
2405                 rctl |= E1000_RCTL_DTYP_PS;
2406
2407                 psrctl |= adapter->rx_ps_bsize0 >>
2408                         E1000_PSRCTL_BSIZE0_SHIFT;
2409
2410                 switch (adapter->rx_ps_pages) {
2411                 case 3:
2412                         psrctl |= PAGE_SIZE <<
2413                                 E1000_PSRCTL_BSIZE3_SHIFT;
2414                 case 2:
2415                         psrctl |= PAGE_SIZE <<
2416                                 E1000_PSRCTL_BSIZE2_SHIFT;
2417                 case 1:
2418                         psrctl |= PAGE_SIZE >>
2419                                 E1000_PSRCTL_BSIZE1_SHIFT;
2420                         break;
2421                 }
2422
2423                 ew32(PSRCTL, psrctl);
2424         }
2425
2426         ew32(RCTL, rctl);
2427         /* just started the receive unit, no need to restart */
2428         adapter->flags &= ~FLAG_RX_RESTART_NOW;
2429 }
2430
2431 /**
2432  * e1000_configure_rx - Configure Receive Unit after Reset
2433  * @adapter: board private structure
2434  *
2435  * Configure the Rx unit of the MAC after a reset.
2436  **/
2437 static void e1000_configure_rx(struct e1000_adapter *adapter)
2438 {
2439         struct e1000_hw *hw = &adapter->hw;
2440         struct e1000_ring *rx_ring = adapter->rx_ring;
2441         u64 rdba;
2442         u32 rdlen, rctl, rxcsum, ctrl_ext;
2443
2444         if (adapter->rx_ps_pages) {
2445                 /* this is a 32 byte descriptor */
2446                 rdlen = rx_ring->count *
2447                         sizeof(union e1000_rx_desc_packet_split);
2448                 adapter->clean_rx = e1000_clean_rx_irq_ps;
2449                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2450         } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
2451                 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2452                 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
2453                 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
2454         } else {
2455                 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2456                 adapter->clean_rx = e1000_clean_rx_irq;
2457                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2458         }
2459
2460         /* disable receives while setting up the descriptors */
2461         rctl = er32(RCTL);
2462         ew32(RCTL, rctl & ~E1000_RCTL_EN);
2463         e1e_flush();
2464         msleep(10);
2465
2466         /* set the Receive Delay Timer Register */
2467         ew32(RDTR, adapter->rx_int_delay);
2468
2469         /* irq moderation */
2470         ew32(RADV, adapter->rx_abs_int_delay);
2471         if (adapter->itr_setting != 0)
2472                 ew32(ITR, 1000000000 / (adapter->itr * 256));
2473
2474         ctrl_ext = er32(CTRL_EXT);
2475         /* Auto-Mask interrupts upon ICR access */
2476         ctrl_ext |= E1000_CTRL_EXT_IAME;
2477         ew32(IAM, 0xffffffff);
2478         ew32(CTRL_EXT, ctrl_ext);
2479         e1e_flush();
2480
2481         /*
2482          * Setup the HW Rx Head and Tail Descriptor Pointers and
2483          * the Base and Length of the Rx Descriptor Ring
2484          */
2485         rdba = rx_ring->dma;
2486         ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
2487         ew32(RDBAH, (rdba >> 32));
2488         ew32(RDLEN, rdlen);
2489         ew32(RDH, 0);
2490         ew32(RDT, 0);
2491         rx_ring->head = E1000_RDH;
2492         rx_ring->tail = E1000_RDT;
2493
2494         /* Enable Receive Checksum Offload for TCP and UDP */
2495         rxcsum = er32(RXCSUM);
2496         if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
2497                 rxcsum |= E1000_RXCSUM_TUOFL;
2498
2499                 /*
2500                  * IPv4 payload checksum for UDP fragments must be
2501                  * used in conjunction with packet-split.
2502                  */
2503                 if (adapter->rx_ps_pages)
2504                         rxcsum |= E1000_RXCSUM_IPPCSE;
2505         } else {
2506                 rxcsum &= ~E1000_RXCSUM_TUOFL;
2507                 /* no need to clear IPPCSE as it defaults to 0 */
2508         }
2509         ew32(RXCSUM, rxcsum);
2510
2511         /*
2512          * Enable early receives on supported devices, only takes effect when
2513          * packet size is equal or larger than the specified value (in 8 byte
2514          * units), e.g. using jumbo frames when setting to E1000_ERT_2048
2515          */
2516         if (adapter->flags & FLAG_HAS_ERT) {
2517                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
2518                         u32 rxdctl = er32(RXDCTL(0));
2519                         ew32(RXDCTL(0), rxdctl | 0x3);
2520                         ew32(ERT, E1000_ERT_2048 | (1 << 13));
2521                         /*
2522                          * With jumbo frames and early-receive enabled,
2523                          * excessive C-state transition latencies result in
2524                          * dropped transactions.
2525                          */
2526                         pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2527                                                   adapter->netdev->name, 55);
2528                 } else {
2529                         pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2530                                                   adapter->netdev->name,
2531                                                   PM_QOS_DEFAULT_VALUE);
2532                 }
2533         }
2534
2535         /* Enable Receives */
2536         ew32(RCTL, rctl);
2537 }
2538
2539 /**
2540  *  e1000_update_mc_addr_list - Update Multicast addresses
2541  *  @hw: pointer to the HW structure
2542  *  @mc_addr_list: array of multicast addresses to program
2543  *  @mc_addr_count: number of multicast addresses to program
2544  *  @rar_used_count: the first RAR register free to program
2545  *  @rar_count: total number of supported Receive Address Registers
2546  *
2547  *  Updates the Receive Address Registers and Multicast Table Array.
2548  *  The caller must have a packed mc_addr_list of multicast addresses.
2549  *  The parameter rar_count will usually be hw->mac.rar_entry_count
2550  *  unless there are workarounds that change this.  Currently no func pointer
2551  *  exists and all implementations are handled in the generic version of this
2552  *  function.
2553  **/
2554 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
2555                                       u32 mc_addr_count, u32 rar_used_count,
2556                                       u32 rar_count)
2557 {
2558         hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count,
2559                                         rar_used_count, rar_count);
2560 }
2561
2562 /**
2563  * e1000_set_multi - Multicast and Promiscuous mode set
2564  * @netdev: network interface device structure
2565  *
2566  * The set_multi entry point is called whenever the multicast address
2567  * list or the network interface flags are updated.  This routine is
2568  * responsible for configuring the hardware for proper multicast,
2569  * promiscuous mode, and all-multi behavior.
2570  **/
2571 static void e1000_set_multi(struct net_device *netdev)
2572 {
2573         struct e1000_adapter *adapter = netdev_priv(netdev);
2574         struct e1000_hw *hw = &adapter->hw;
2575         struct e1000_mac_info *mac = &hw->mac;
2576         struct dev_mc_list *mc_ptr;
2577         u8  *mta_list;
2578         u32 rctl;
2579         int i;
2580
2581         /* Check for Promiscuous and All Multicast modes */
2582
2583         rctl = er32(RCTL);
2584
2585         if (netdev->flags & IFF_PROMISC) {
2586                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2587                 rctl &= ~E1000_RCTL_VFE;
2588         } else {
2589                 if (netdev->flags & IFF_ALLMULTI) {
2590                         rctl |= E1000_RCTL_MPE;
2591                         rctl &= ~E1000_RCTL_UPE;
2592                 } else {
2593                         rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2594                 }
2595                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
2596                         rctl |= E1000_RCTL_VFE;
2597         }
2598
2599         ew32(RCTL, rctl);
2600
2601         if (netdev->mc_count) {
2602                 mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC);
2603                 if (!mta_list)
2604                         return;
2605
2606                 /* prepare a packed array of only addresses. */
2607                 mc_ptr = netdev->mc_list;
2608
2609                 for (i = 0; i < netdev->mc_count; i++) {
2610                         if (!mc_ptr)
2611                                 break;
2612                         memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr,
2613                                ETH_ALEN);
2614                         mc_ptr = mc_ptr->next;
2615                 }
2616
2617                 e1000_update_mc_addr_list(hw, mta_list, i, 1,
2618                                           mac->rar_entry_count);
2619                 kfree(mta_list);
2620         } else {
2621                 /*
2622                  * if we're called from probe, we might not have
2623                  * anything to do here, so clear out the list
2624                  */
2625                 e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count);
2626         }
2627 }
2628
2629 /**
2630  * e1000_configure - configure the hardware for Rx and Tx
2631  * @adapter: private board structure
2632  **/
2633 static void e1000_configure(struct e1000_adapter *adapter)
2634 {
2635         e1000_set_multi(adapter->netdev);
2636
2637         e1000_restore_vlan(adapter);
2638         e1000_init_manageability(adapter);
2639
2640         e1000_configure_tx(adapter);
2641         e1000_setup_rctl(adapter);
2642         e1000_configure_rx(adapter);
2643         adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
2644 }
2645
2646 /**
2647  * e1000e_power_up_phy - restore link in case the phy was powered down
2648  * @adapter: address of board private structure
2649  *
2650  * The phy may be powered down to save power and turn off link when the
2651  * driver is unloaded and wake on lan is not enabled (among others)
2652  * *** this routine MUST be followed by a call to e1000e_reset ***
2653  **/
2654 void e1000e_power_up_phy(struct e1000_adapter *adapter)
2655 {
2656         if (adapter->hw.phy.ops.power_up)
2657                 adapter->hw.phy.ops.power_up(&adapter->hw);
2658
2659         adapter->hw.mac.ops.setup_link(&adapter->hw);
2660 }
2661
2662 /**
2663  * e1000_power_down_phy - Power down the PHY
2664  *
2665  * Power down the PHY so no link is implied when interface is down.
2666  * The PHY cannot be powered down if management or WoL is active.
2667  */
2668 static void e1000_power_down_phy(struct e1000_adapter *adapter)
2669 {
2670         /* WoL is enabled */
2671         if (adapter->wol)
2672                 return;
2673
2674         if (adapter->hw.phy.ops.power_down)
2675                 adapter->hw.phy.ops.power_down(&adapter->hw);
2676 }
2677
2678 /**
2679  * e1000e_reset - bring the hardware into a known good state
2680  *
2681  * This function boots the hardware and enables some settings that
2682  * require a configuration cycle of the hardware - those cannot be
2683  * set/changed during runtime. After reset the device needs to be
2684  * properly configured for Rx, Tx etc.
2685  */
2686 void e1000e_reset(struct e1000_adapter *adapter)
2687 {
2688         struct e1000_mac_info *mac = &adapter->hw.mac;
2689         struct e1000_fc_info *fc = &adapter->hw.fc;
2690         struct e1000_hw *hw = &adapter->hw;
2691         u32 tx_space, min_tx_space, min_rx_space;
2692         u32 pba = adapter->pba;
2693         u16 hwm;
2694
2695         /* reset Packet Buffer Allocation to default */
2696         ew32(PBA, pba);
2697
2698         if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
2699                 /*
2700                  * To maintain wire speed transmits, the Tx FIFO should be
2701                  * large enough to accommodate two full transmit packets,
2702                  * rounded up to the next 1KB and expressed in KB.  Likewise,
2703                  * the Rx FIFO should be large enough to accommodate at least
2704                  * one full receive packet and is similarly rounded up and
2705                  * expressed in KB.
2706                  */
2707                 pba = er32(PBA);
2708                 /* upper 16 bits has Tx packet buffer allocation size in KB */
2709                 tx_space = pba >> 16;
2710                 /* lower 16 bits has Rx packet buffer allocation size in KB */
2711                 pba &= 0xffff;
2712                 /*
2713                  * the Tx fifo also stores 16 bytes of information about the tx
2714                  * but don't include ethernet FCS because hardware appends it
2715                  */
2716                 min_tx_space = (adapter->max_frame_size +
2717                                 sizeof(struct e1000_tx_desc) -
2718                                 ETH_FCS_LEN) * 2;
2719                 min_tx_space = ALIGN(min_tx_space, 1024);
2720                 min_tx_space >>= 10;
2721                 /* software strips receive CRC, so leave room for it */
2722                 min_rx_space = adapter->max_frame_size;
2723                 min_rx_space = ALIGN(min_rx_space, 1024);
2724                 min_rx_space >>= 10;
2725
2726                 /*
2727                  * If current Tx allocation is less than the min Tx FIFO size,
2728                  * and the min Tx FIFO size is less than the current Rx FIFO
2729                  * allocation, take space away from current Rx allocation
2730                  */
2731                 if ((tx_space < min_tx_space) &&
2732                     ((min_tx_space - tx_space) < pba)) {
2733                         pba -= min_tx_space - tx_space;
2734
2735                         /*
2736                          * if short on Rx space, Rx wins and must trump tx
2737                          * adjustment or use Early Receive if available
2738                          */
2739                         if ((pba < min_rx_space) &&
2740                             (!(adapter->flags & FLAG_HAS_ERT)))
2741                                 /* ERT enabled in e1000_configure_rx */
2742                                 pba = min_rx_space;
2743                 }
2744
2745                 ew32(PBA, pba);
2746         }
2747
2748
2749         /*
2750          * flow control settings
2751          *
2752          * The high water mark must be low enough to fit one full frame
2753          * (or the size used for early receive) above it in the Rx FIFO.
2754          * Set it to the lower of:
2755          * - 90% of the Rx FIFO size, and
2756          * - the full Rx FIFO size minus the early receive size (for parts
2757          *   with ERT support assuming ERT set to E1000_ERT_2048), or
2758          * - the full Rx FIFO size minus one full frame
2759          */
2760         if (hw->mac.type == e1000_pchlan) {
2761                 /*
2762                  * Workaround PCH LOM adapter hangs with certain network
2763                  * loads.  If hangs persist, try disabling Tx flow control.
2764                  */
2765                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
2766                         fc->high_water = 0x3500;
2767                         fc->low_water  = 0x1500;
2768                 } else {
2769                         fc->high_water = 0x5000;
2770                         fc->low_water  = 0x3000;
2771                 }
2772         } else {
2773                 if ((adapter->flags & FLAG_HAS_ERT) &&
2774                     (adapter->netdev->mtu > ETH_DATA_LEN))
2775                         hwm = min(((pba << 10) * 9 / 10),
2776                                   ((pba << 10) - (E1000_ERT_2048 << 3)));
2777                 else
2778                         hwm = min(((pba << 10) * 9 / 10),
2779                                   ((pba << 10) - adapter->max_frame_size));
2780
2781                 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
2782                 fc->low_water = fc->high_water - 8;
2783         }
2784
2785         if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
2786                 fc->pause_time = 0xFFFF;
2787         else
2788                 fc->pause_time = E1000_FC_PAUSE_TIME;
2789         fc->send_xon = 1;
2790         fc->current_mode = fc->requested_mode;
2791
2792         /* Allow time for pending master requests to run */
2793         mac->ops.reset_hw(hw);
2794
2795         /*
2796          * For parts with AMT enabled, let the firmware know
2797          * that the network interface is in control
2798          */
2799         if (adapter->flags & FLAG_HAS_AMT)
2800                 e1000_get_hw_control(adapter);
2801
2802         ew32(WUC, 0);
2803         if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
2804                 e1e_wphy(&adapter->hw, BM_WUC, 0);
2805
2806         if (mac->ops.init_hw(hw))
2807                 e_err("Hardware Error\n");
2808
2809         /* additional part of the flow-control workaround above */
2810         if (hw->mac.type == e1000_pchlan)
2811                 ew32(FCRTV_PCH, 0x1000);
2812
2813         e1000_update_mng_vlan(adapter);
2814
2815         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
2816         ew32(VET, ETH_P_8021Q);
2817
2818         e1000e_reset_adaptive(hw);
2819         e1000_get_phy_info(hw);
2820
2821         if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
2822             !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
2823                 u16 phy_data = 0;
2824                 /*
2825                  * speed up time to link by disabling smart power down, ignore
2826                  * the return value of this function because there is nothing
2827                  * different we would do if it failed
2828                  */
2829                 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
2830                 phy_data &= ~IGP02E1000_PM_SPD;
2831                 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
2832         }
2833 }
2834
2835 int e1000e_up(struct e1000_adapter *adapter)
2836 {
2837         struct e1000_hw *hw = &adapter->hw;
2838
2839         /* DMA latency requirement to workaround early-receive/jumbo issue */
2840         if (adapter->flags & FLAG_HAS_ERT)
2841                 pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
2842                                        adapter->netdev->name,
2843                                        PM_QOS_DEFAULT_VALUE);
2844
2845         /* hardware has been reset, we need to reload some things */
2846         e1000_configure(adapter);
2847
2848         clear_bit(__E1000_DOWN, &adapter->state);
2849
2850         napi_enable(&adapter->napi);
2851         if (adapter->msix_entries)
2852                 e1000_configure_msix(adapter);
2853         e1000_irq_enable(adapter);
2854
2855         netif_wake_queue(adapter->netdev);
2856
2857         /* fire a link change interrupt to start the watchdog */
2858         ew32(ICS, E1000_ICS_LSC);
2859         return 0;
2860 }
2861
2862 void e1000e_down(struct e1000_adapter *adapter)
2863 {
2864         struct net_device *netdev = adapter->netdev;
2865         struct e1000_hw *hw = &adapter->hw;
2866         u32 tctl, rctl;
2867
2868         /*
2869          * signal that we're down so the interrupt handler does not
2870          * reschedule our watchdog timer
2871          */
2872         set_bit(__E1000_DOWN, &adapter->state);
2873
2874         /* disable receives in the hardware */
2875         rctl = er32(RCTL);
2876         ew32(RCTL, rctl & ~E1000_RCTL_EN);
2877         /* flush and sleep below */
2878
2879         netif_stop_queue(netdev);
2880
2881         /* disable transmits in the hardware */
2882         tctl = er32(TCTL);
2883         tctl &= ~E1000_TCTL_EN;
2884         ew32(TCTL, tctl);
2885         /* flush both disables and wait for them to finish */
2886         e1e_flush();
2887         msleep(10);
2888
2889         napi_disable(&adapter->napi);
2890         e1000_irq_disable(adapter);
2891
2892         del_timer_sync(&adapter->watchdog_timer);
2893         del_timer_sync(&adapter->phy_info_timer);
2894
2895         netdev->tx_queue_len = adapter->tx_queue_len;
2896         netif_carrier_off(netdev);
2897         adapter->link_speed = 0;
2898         adapter->link_duplex = 0;
2899
2900         if (!pci_channel_offline(adapter->pdev))
2901                 e1000e_reset(adapter);
2902         e1000_clean_tx_ring(adapter);
2903         e1000_clean_rx_ring(adapter);
2904
2905         if (adapter->flags & FLAG_HAS_ERT)
2906                 pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
2907                                           adapter->netdev->name);
2908
2909         /*
2910          * TODO: for power management, we could drop the link and
2911          * pci_disable_device here.
2912          */
2913 }
2914
2915 void e1000e_reinit_locked(struct e1000_adapter *adapter)
2916 {
2917         might_sleep();
2918         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
2919                 msleep(1);
2920         e1000e_down(adapter);
2921         e1000e_up(adapter);
2922         clear_bit(__E1000_RESETTING, &adapter->state);
2923 }
2924
2925 /**
2926  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
2927  * @adapter: board private structure to initialize
2928  *
2929  * e1000_sw_init initializes the Adapter private data structure.
2930  * Fields are initialized based on PCI device information and
2931  * OS network device settings (MTU size).
2932  **/
2933 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
2934 {
2935         struct net_device *netdev = adapter->netdev;
2936
2937         adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
2938         adapter->rx_ps_bsize0 = 128;
2939         adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
2940         adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
2941
2942         e1000e_set_interrupt_capability(adapter);
2943
2944         if (e1000_alloc_queues(adapter))
2945                 return -ENOMEM;
2946
2947         /* Explicitly disable IRQ since the NIC can be in any state. */
2948         e1000_irq_disable(adapter);
2949
2950         set_bit(__E1000_DOWN, &adapter->state);
2951         return 0;
2952 }
2953
2954 /**
2955  * e1000_intr_msi_test - Interrupt Handler
2956  * @irq: interrupt number
2957  * @data: pointer to a network interface device structure
2958  **/
2959 static irqreturn_t e1000_intr_msi_test(int irq, void *data)
2960 {
2961         struct net_device *netdev = data;
2962         struct e1000_adapter *adapter = netdev_priv(netdev);
2963         struct e1000_hw *hw = &adapter->hw;
2964         u32 icr = er32(ICR);
2965
2966         e_dbg("icr is %08X\n", icr);
2967         if (icr & E1000_ICR_RXSEQ) {
2968                 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
2969                 wmb();
2970         }
2971
2972         return IRQ_HANDLED;
2973 }
2974
2975 /**
2976  * e1000_test_msi_interrupt - Returns 0 for successful test
2977  * @adapter: board private struct
2978  *
2979  * code flow taken from tg3.c
2980  **/
2981 static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
2982 {
2983         struct net_device *netdev = adapter->netdev;
2984         struct e1000_hw *hw = &adapter->hw;
2985         int err;
2986
2987         /* poll_enable hasn't been called yet, so don't need disable */
2988         /* clear any pending events */
2989         er32(ICR);
2990
2991         /* free the real vector and request a test handler */
2992         e1000_free_irq(adapter);
2993         e1000e_reset_interrupt_capability(adapter);
2994
2995         /* Assume that the test fails, if it succeeds then the test
2996          * MSI irq handler will unset this flag */
2997         adapter->flags |= FLAG_MSI_TEST_FAILED;
2998
2999         err = pci_enable_msi(adapter->pdev);
3000         if (err)
3001                 goto msi_test_failed;
3002
3003         err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
3004                           netdev->name, netdev);
3005         if (err) {
3006                 pci_disable_msi(adapter->pdev);
3007                 goto msi_test_failed;
3008         }
3009
3010         wmb();
3011
3012         e1000_irq_enable(adapter);
3013
3014         /* fire an unusual interrupt on the test handler */
3015         ew32(ICS, E1000_ICS_RXSEQ);
3016         e1e_flush();
3017         msleep(50);
3018
3019         e1000_irq_disable(adapter);
3020
3021         rmb();
3022
3023         if (adapter->flags & FLAG_MSI_TEST_FAILED) {
3024                 adapter->int_mode = E1000E_INT_MODE_LEGACY;
3025                 err = -EIO;
3026                 e_info("MSI interrupt test failed!\n");
3027         }
3028
3029         free_irq(adapter->pdev->irq, netdev);
3030         pci_disable_msi(adapter->pdev);
3031
3032         if (err == -EIO)
3033                 goto msi_test_failed;
3034
3035         /* okay so the test worked, restore settings */
3036         e_dbg("MSI interrupt test succeeded!\n");
3037 msi_test_failed:
3038         e1000e_set_interrupt_capability(adapter);
3039         e1000_request_irq(adapter);
3040         return err;
3041 }
3042
3043 /**
3044  * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
3045  * @adapter: board private struct
3046  *
3047  * code flow taken from tg3.c, called with e1000 interrupts disabled.
3048  **/
3049 static int e1000_test_msi(struct e1000_adapter *adapter)
3050 {
3051         int err;
3052         u16 pci_cmd;
3053
3054         if (!(adapter->flags & FLAG_MSI_ENABLED))
3055                 return 0;
3056
3057         /* disable SERR in case the MSI write causes a master abort */
3058         pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
3059         pci_write_config_word(adapter->pdev, PCI_COMMAND,
3060                               pci_cmd & ~PCI_COMMAND_SERR);
3061
3062         err = e1000_test_msi_interrupt(adapter);
3063
3064         /* restore previous setting of command word */
3065         pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
3066
3067         /* success ! */
3068         if (!err)
3069                 return 0;
3070
3071         /* EIO means MSI test failed */
3072         if (err != -EIO)
3073                 return err;
3074
3075         /* back to INTx mode */
3076         e_warn("MSI interrupt test failed, using legacy interrupt.\n");
3077
3078         e1000_free_irq(adapter);
3079
3080         err = e1000_request_irq(adapter);
3081
3082         return err;
3083 }
3084
3085 /**
3086  * e1000_open - Called when a network interface is made active
3087  * @netdev: network interface device structure
3088  *
3089  * Returns 0 on success, negative value on failure
3090  *
3091  * The open entry point is called when a network interface is made
3092  * active by the system (IFF_UP).  At this point all resources needed
3093  * for transmit and receive operations are allocated, the interrupt
3094  * handler is registered with the OS, the watchdog timer is started,
3095  * and the stack is notified that the interface is ready.
3096  **/
3097 static int e1000_open(struct net_device *netdev)
3098 {
3099         struct e1000_adapter *adapter = netdev_priv(netdev);
3100         struct e1000_hw *hw = &adapter->hw;
3101         int err;
3102
3103         /* disallow open during test */
3104         if (test_bit(__E1000_TESTING, &adapter->state))
3105                 return -EBUSY;
3106
3107         netif_carrier_off(netdev);
3108
3109         /* allocate transmit descriptors */
3110         err = e1000e_setup_tx_resources(adapter);
3111         if (err)
3112                 goto err_setup_tx;
3113
3114         /* allocate receive descriptors */
3115         err = e1000e_setup_rx_resources(adapter);
3116         if (err)
3117                 goto err_setup_rx;
3118
3119         e1000e_power_up_phy(adapter);
3120
3121         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
3122         if ((adapter->hw.mng_cookie.status &
3123              E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
3124                 e1000_update_mng_vlan(adapter);
3125
3126         /*
3127          * If AMT is enabled, let the firmware know that the network
3128          * interface is now open
3129          */
3130         if (adapter->flags & FLAG_HAS_AMT)
3131                 e1000_get_hw_control(adapter);
3132
3133         /*
3134          * before we allocate an interrupt, we must be ready to handle it.
3135          * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3136          * as soon as we call pci_request_irq, so we have to setup our
3137          * clean_rx handler before we do so.
3138          */
3139         e1000_configure(adapter);
3140
3141         err = e1000_request_irq(adapter);
3142         if (err)
3143                 goto err_req_irq;
3144
3145         /*
3146          * Work around PCIe errata with MSI interrupts causing some chipsets to
3147          * ignore e1000e MSI messages, which means we need to test our MSI
3148          * interrupt now
3149          */
3150         if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
3151                 err = e1000_test_msi(adapter);
3152                 if (err) {
3153                         e_err("Interrupt allocation failed\n");
3154                         goto err_req_irq;
3155                 }
3156         }
3157
3158         /* From here on the code is the same as e1000e_up() */
3159         clear_bit(__E1000_DOWN, &adapter->state);
3160
3161         napi_enable(&adapter->napi);
3162
3163         e1000_irq_enable(adapter);
3164
3165         netif_start_queue(netdev);
3166
3167         /* fire a link status change interrupt to start the watchdog */
3168         ew32(ICS, E1000_ICS_LSC);
3169
3170         return 0;
3171
3172 err_req_irq:
3173         e1000_release_hw_control(adapter);
3174         e1000_power_down_phy(adapter);
3175         e1000e_free_rx_resources(adapter);
3176 err_setup_rx:
3177         e1000e_free_tx_resources(adapter);
3178 err_setup_tx:
3179         e1000e_reset(adapter);
3180
3181         return err;
3182 }
3183
3184 /**
3185  * e1000_close - Disables a network interface
3186  * @netdev: network interface device structure
3187  *
3188  * Returns 0, this is not allowed to fail
3189  *
3190  * The close entry point is called when an interface is de-activated
3191  * by the OS.  The hardware is still under the drivers control, but
3192  * needs to be disabled.  A global MAC reset is issued to stop the
3193  * hardware, and all transmit and receive resources are freed.
3194  **/
3195 static int e1000_close(struct net_device *netdev)
3196 {
3197         struct e1000_adapter *adapter = netdev_priv(netdev);
3198
3199         WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
3200         e1000e_down(adapter);
3201         e1000_power_down_phy(adapter);
3202         e1000_free_irq(adapter);
3203
3204         e1000e_free_tx_resources(adapter);
3205         e1000e_free_rx_resources(adapter);
3206
3207         /*
3208          * kill manageability vlan ID if supported, but not if a vlan with
3209          * the same ID is registered on the host OS (let 8021q kill it)
3210          */
3211         if ((adapter->hw.mng_cookie.status &
3212                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
3213              !(adapter->vlgrp &&
3214                vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
3215                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
3216
3217         /*
3218          * If AMT is enabled, let the firmware know that the network
3219          * interface is now closed
3220          */
3221         if (adapter->flags & FLAG_HAS_AMT)
3222                 e1000_release_hw_control(adapter);
3223
3224         return 0;
3225 }
3226 /**
3227  * e1000_set_mac - Change the Ethernet Address of the NIC
3228  * @netdev: network interface device structure
3229  * @p: pointer to an address structure
3230  *
3231  * Returns 0 on success, negative on failure
3232  **/
3233 static int e1000_set_mac(struct net_device *netdev, void *p)
3234 {
3235         struct e1000_adapter *adapter = netdev_priv(netdev);
3236         struct sockaddr *addr = p;
3237
3238         if (!is_valid_ether_addr(addr->sa_data))
3239                 return -EADDRNOTAVAIL;
3240
3241         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3242         memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
3243
3244         e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
3245
3246         if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
3247                 /* activate the work around */
3248                 e1000e_set_laa_state_82571(&adapter->hw, 1);
3249
3250                 /*
3251                  * Hold a copy of the LAA in RAR[14] This is done so that
3252                  * between the time RAR[0] gets clobbered  and the time it
3253                  * gets fixed (in e1000_watchdog), the actual LAA is in one
3254                  * of the RARs and no incoming packets directed to this port
3255                  * are dropped. Eventually the LAA will be in RAR[0] and
3256                  * RAR[14]
3257                  */
3258                 e1000e_rar_set(&adapter->hw,
3259                               adapter->hw.mac.addr,
3260                               adapter->hw.mac.rar_entry_count - 1);
3261         }
3262
3263         return 0;
3264 }
3265
3266 /**
3267  * e1000e_update_phy_task - work thread to update phy
3268  * @work: pointer to our work struct
3269  *
3270  * this worker thread exists because we must acquire a
3271  * semaphore to read the phy, which we could msleep while
3272  * waiting for it, and we can't msleep in a timer.
3273  **/
3274 static void e1000e_update_phy_task(struct work_struct *work)
3275 {
3276         struct e1000_adapter *adapter = container_of(work,
3277                                         struct e1000_adapter, update_phy_task);
3278         e1000_get_phy_info(&adapter->hw);
3279 }
3280
3281 /*
3282  * Need to wait a few seconds after link up to get diagnostic information from
3283  * the phy
3284  */
3285 static void e1000_update_phy_info(unsigned long data)
3286 {
3287         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3288         schedule_work(&adapter->update_phy_task);
3289 }
3290
3291 /**
3292  * e1000e_update_stats - Update the board statistics counters
3293  * @adapter: board private structure
3294  **/
3295 void e1000e_update_stats(struct e1000_adapter *adapter)
3296 {
3297         struct net_device *netdev = adapter->netdev;
3298         struct e1000_hw *hw = &adapter->hw;
3299         struct pci_dev *pdev = adapter->pdev;
3300         u16 phy_data;
3301
3302         /*
3303          * Prevent stats update while adapter is being reset, or if the pci
3304          * connection is down.
3305          */
3306         if (adapter->link_speed == 0)
3307                 return;
3308         if (pci_channel_offline(pdev))
3309                 return;
3310
3311         adapter->stats.crcerrs += er32(CRCERRS);
3312         adapter->stats.gprc += er32(GPRC);
3313         adapter->stats.gorc += er32(GORCL);
3314         er32(GORCH); /* Clear gorc */
3315         adapter->stats.bprc += er32(BPRC);
3316         adapter->stats.mprc += er32(MPRC);
3317         adapter->stats.roc += er32(ROC);
3318
3319         adapter->stats.mpc += er32(MPC);
3320         if ((hw->phy.type == e1000_phy_82578) ||
3321             (hw->phy.type == e1000_phy_82577)) {
3322                 e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
3323                 if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
3324                         adapter->stats.scc += phy_data;
3325
3326                 e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
3327                 if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
3328                         adapter->stats.ecol += phy_data;
3329
3330                 e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
3331                 if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
3332                         adapter->stats.mcc += phy_data;
3333
3334                 e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
3335                 if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
3336                         adapter->stats.latecol += phy_data;
3337
3338                 e1e_rphy(hw, HV_DC_UPPER, &phy_data);
3339                 if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
3340                         adapter->stats.dc += phy_data;
3341         } else {
3342                 adapter->stats.scc += er32(SCC);
3343                 adapter->stats.ecol += er32(ECOL);
3344                 adapter->stats.mcc += er32(MCC);
3345                 adapter->stats.latecol += er32(LATECOL);
3346                 adapter->stats.dc += er32(DC);
3347         }
3348         adapter->stats.xonrxc += er32(XONRXC);
3349         adapter->stats.xontxc += er32(XONTXC);
3350         adapter->stats.xoffrxc += er32(XOFFRXC);
3351         adapter->stats.xofftxc += er32(XOFFTXC);
3352         adapter->stats.gptc += er32(GPTC);
3353         adapter->stats.gotc += er32(GOTCL);
3354         er32(GOTCH); /* Clear gotc */
3355         adapter->stats.rnbc += er32(RNBC);
3356         adapter->stats.ruc += er32(RUC);
3357
3358         adapter->stats.mptc += er32(MPTC);
3359         adapter->stats.bptc += er32(BPTC);
3360
3361         /* used for adaptive IFS */
3362
3363         hw->mac.tx_packet_delta = er32(TPT);
3364         adapter->stats.tpt += hw->mac.tx_packet_delta;
3365         if ((hw->phy.type == e1000_phy_82578) ||
3366             (hw->phy.type == e1000_phy_82577)) {
3367                 e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
3368                 if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
3369                         hw->mac.collision_delta = phy_data;
3370         } else {
3371                 hw->mac.collision_delta = er32(COLC);
3372         }
3373         adapter->stats.colc += hw->mac.collision_delta;
3374
3375         adapter->stats.algnerrc += er32(ALGNERRC);
3376         adapter->stats.rxerrc += er32(RXERRC);
3377         if ((hw->phy.type == e1000_phy_82578) ||
3378             (hw->phy.type == e1000_phy_82577)) {
3379                 e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
3380                 if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
3381                         adapter->stats.tncrs += phy_data;
3382         } else {
3383                 if ((hw->mac.type != e1000_82574) &&
3384                     (hw->mac.type != e1000_82583))
3385                         adapter->stats.tncrs += er32(TNCRS);
3386         }
3387         adapter->stats.cexterr += er32(CEXTERR);
3388         adapter->stats.tsctc += er32(TSCTC);
3389         adapter->stats.tsctfc += er32(TSCTFC);
3390
3391         /* Fill out the OS statistics structure */
3392         netdev->stats.multicast = adapter->stats.mprc;
3393         netdev->stats.collisions = adapter->stats.colc;
3394
3395         /* Rx Errors */
3396
3397         /*
3398          * RLEC on some newer hardware can be incorrect so build
3399          * our own version based on RUC and ROC
3400          */
3401         netdev->stats.rx_errors = adapter->stats.rxerrc +
3402                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3403                 adapter->stats.ruc + adapter->stats.roc +
3404                 adapter->stats.cexterr;
3405         netdev->stats.rx_length_errors = adapter->stats.ruc +
3406                                               adapter->stats.roc;
3407         netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
3408         netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
3409         netdev->stats.rx_missed_errors = adapter->stats.mpc;
3410
3411         /* Tx Errors */
3412         netdev->stats.tx_errors = adapter->stats.ecol +
3413                                        adapter->stats.latecol;
3414         netdev->stats.tx_aborted_errors = adapter->stats.ecol;
3415         netdev->stats.tx_window_errors = adapter->stats.latecol;
3416         netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
3417
3418         /* Tx Dropped needs to be maintained elsewhere */
3419
3420         /* Management Stats */
3421         adapter->stats.mgptc += er32(MGTPTC);
3422         adapter->stats.mgprc += er32(MGTPRC);
3423         adapter->stats.mgpdc += er32(MGTPDC);
3424 }
3425
3426 /**
3427  * e1000_phy_read_status - Update the PHY register status snapshot
3428  * @adapter: board private structure
3429  **/
3430 static void e1000_phy_read_status(struct e1000_adapter *adapter)
3431 {
3432         struct e1000_hw *hw = &adapter->hw;
3433         struct e1000_phy_regs *phy = &adapter->phy_regs;
3434         int ret_val;
3435
3436         if ((er32(STATUS) & E1000_STATUS_LU) &&
3437             (adapter->hw.phy.media_type == e1000_media_type_copper)) {
3438                 ret_val  = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
3439                 ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
3440                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
3441                 ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
3442                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
3443                 ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
3444                 ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
3445                 ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
3446                 if (ret_val)
3447                         e_warn("Error reading PHY register\n");
3448         } else {
3449                 /*
3450                  * Do not read PHY registers if link is not up
3451                  * Set values to typical power-on defaults
3452                  */
3453                 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
3454                 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
3455                              BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
3456                              BMSR_ERCAP);
3457                 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
3458                                   ADVERTISE_ALL | ADVERTISE_CSMA);
3459                 phy->lpa = 0;
3460                 phy->expansion = EXPANSION_ENABLENPAGE;
3461                 phy->ctrl1000 = ADVERTISE_1000FULL;
3462                 phy->stat1000 = 0;
3463                 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
3464         }
3465 }
3466
3467 static void e1000_print_link_info(struct e1000_adapter *adapter)
3468 {
3469         struct e1000_hw *hw = &adapter->hw;
3470         u32 ctrl = er32(CTRL);
3471
3472         /* Link status message must follow this format for user tools */
3473         printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
3474                "Flow Control: %s\n",
3475                adapter->netdev->name,
3476                adapter->link_speed,
3477                (adapter->link_duplex == FULL_DUPLEX) ?
3478                                 "Full Duplex" : "Half Duplex",
3479                ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
3480                                 "RX/TX" :
3481                ((ctrl & E1000_CTRL_RFCE) ? "RX" :
3482                ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
3483 }
3484
3485 bool e1000_has_link(struct e1000_adapter *adapter)
3486 {
3487         struct e1000_hw *hw = &adapter->hw;
3488         bool link_active = 0;
3489         s32 ret_val = 0;
3490
3491         /*
3492          * get_link_status is set on LSC (link status) interrupt or
3493          * Rx sequence error interrupt.  get_link_status will stay
3494          * false until the check_for_link establishes link
3495          * for copper adapters ONLY
3496          */
3497         switch (hw->phy.media_type) {
3498         case e1000_media_type_copper:
3499                 if (hw->mac.get_link_status) {
3500                         ret_val = hw->mac.ops.check_for_link(hw);
3501                         link_active = !hw->mac.get_link_status;
3502                 } else {
3503                         link_active = 1;
3504                 }
3505                 break;
3506         case e1000_media_type_fiber:
3507                 ret_val = hw->mac.ops.check_for_link(hw);
3508                 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
3509                 break;
3510         case e1000_media_type_internal_serdes:
3511                 ret_val = hw->mac.ops.check_for_link(hw);
3512                 link_active = adapter->hw.mac.serdes_has_link;
3513                 break;
3514         default:
3515         case e1000_media_type_unknown:
3516                 break;
3517         }
3518
3519         if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
3520             (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
3521                 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
3522                 e_info("Gigabit has been disabled, downgrading speed\n");
3523         }
3524
3525         return link_active;
3526 }
3527
3528 static void e1000e_enable_receives(struct e1000_adapter *adapter)
3529 {
3530         /* make sure the receive unit is started */
3531         if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
3532             (adapter->flags & FLAG_RX_RESTART_NOW)) {
3533                 struct e1000_hw *hw = &adapter->hw;
3534                 u32 rctl = er32(RCTL);
3535                 ew32(RCTL, rctl | E1000_RCTL_EN);
3536                 adapter->flags &= ~FLAG_RX_RESTART_NOW;
3537         }
3538 }
3539
3540 /**
3541  * e1000_watchdog - Timer Call-back
3542  * @data: pointer to adapter cast into an unsigned long
3543  **/
3544 static void e1000_watchdog(unsigned long data)
3545 {
3546         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3547
3548         /* Do the rest outside of interrupt context */
3549         schedule_work(&adapter->watchdog_task);
3550
3551         /* TODO: make this use queue_delayed_work() */
3552 }
3553
3554 static void e1000_watchdog_task(struct work_struct *work)
3555 {
3556         struct e1000_adapter *adapter = container_of(work,
3557                                         struct e1000_adapter, watchdog_task);
3558         struct net_device *netdev = adapter->netdev;
3559         struct e1000_mac_info *mac = &adapter->hw.mac;
3560         struct e1000_phy_info *phy = &adapter->hw.phy;
3561         struct e1000_ring *tx_ring = adapter->tx_ring;
3562         struct e1000_hw *hw = &adapter->hw;
3563         u32 link, tctl;
3564         int tx_pending = 0;
3565
3566         link = e1000_has_link(adapter);
3567         if ((netif_carrier_ok(netdev)) && link) {
3568                 e1000e_enable_receives(adapter);
3569                 goto link_up;
3570         }
3571
3572         if ((e1000e_enable_tx_pkt_filtering(hw)) &&
3573             (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
3574                 e1000_update_mng_vlan(adapter);
3575
3576         if (link) {
3577                 if (!netif_carrier_ok(netdev)) {
3578                         bool txb2b = 1;
3579                         /* update snapshot of PHY registers on LSC */
3580                         e1000_phy_read_status(adapter);
3581                         mac->ops.get_link_up_info(&adapter->hw,
3582                                                    &adapter->link_speed,
3583                                                    &adapter->link_duplex);
3584                         e1000_print_link_info(adapter);
3585                         /*
3586                          * On supported PHYs, check for duplex mismatch only
3587                          * if link has autonegotiated at 10/100 half
3588                          */
3589                         if ((hw->phy.type == e1000_phy_igp_3 ||
3590                              hw->phy.type == e1000_phy_bm) &&
3591                             (hw->mac.autoneg == true) &&
3592                             (adapter->link_speed == SPEED_10 ||
3593                              adapter->link_speed == SPEED_100) &&
3594                             (adapter->link_duplex == HALF_DUPLEX)) {
3595                                 u16 autoneg_exp;
3596
3597                                 e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
3598
3599                                 if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
3600                                         e_info("Autonegotiated half duplex but"
3601                                                " link partner cannot autoneg. "
3602                                                " Try forcing full duplex if "
3603                                                "link gets many collisions.\n");
3604                         }
3605
3606                         /*
3607                          * tweak tx_queue_len according to speed/duplex
3608                          * and adjust the timeout factor
3609                          */
3610                         netdev->tx_queue_len = adapter->tx_queue_len;
3611                         adapter->tx_timeout_factor = 1;
3612                         switch (adapter->link_speed) {
3613                         case SPEED_10:
3614                                 txb2b = 0;
3615                                 netdev->tx_queue_len = 10;
3616                                 adapter->tx_timeout_factor = 16;
3617                                 break;
3618                         case SPEED_100:
3619                                 txb2b = 0;
3620                                 netdev->tx_queue_len = 100;
3621                                 adapter->tx_timeout_factor = 10;
3622                                 break;
3623                         }
3624
3625                         /*
3626                          * workaround: re-program speed mode bit after
3627                          * link-up event
3628                          */
3629                         if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
3630                             !txb2b) {
3631                                 u32 tarc0;
3632                                 tarc0 = er32(TARC(0));
3633                                 tarc0 &= ~SPEED_MODE_BIT;
3634                                 ew32(TARC(0), tarc0);
3635                         }
3636
3637                         /*
3638                          * disable TSO for pcie and 10/100 speeds, to avoid
3639                          * some hardware issues
3640                          */
3641                         if (!(adapter->flags & FLAG_TSO_FORCE)) {
3642                                 switch (adapter->link_speed) {
3643                                 case SPEED_10:
3644                                 case SPEED_100:
3645                                         e_info("10/100 speed: disabling TSO\n");
3646                                         netdev->features &= ~NETIF_F_TSO;
3647                                         netdev->features &= ~NETIF_F_TSO6;
3648                                         break;
3649                                 case SPEED_1000:
3650                                         netdev->features |= NETIF_F_TSO;
3651                                         netdev->features |= NETIF_F_TSO6;
3652                                         break;
3653                                 default:
3654                                         /* oops */
3655                                         break;
3656                                 }
3657                         }
3658
3659                         /*
3660                          * enable transmits in the hardware, need to do this
3661                          * after setting TARC(0)
3662                          */
3663                         tctl = er32(TCTL);
3664                         tctl |= E1000_TCTL_EN;
3665                         ew32(TCTL, tctl);
3666
3667                         /*
3668                          * Perform any post-link-up configuration before
3669                          * reporting link up.
3670                          */
3671                         if (phy->ops.cfg_on_link_up)
3672                                 phy->ops.cfg_on_link_up(hw);
3673
3674                         netif_carrier_on(netdev);
3675
3676                         if (!test_bit(__E1000_DOWN, &adapter->state))
3677                                 mod_timer(&adapter->phy_info_timer,
3678                                           round_jiffies(jiffies + 2 * HZ));
3679                 }
3680         } else {
3681                 if (netif_carrier_ok(netdev)) {
3682                         adapter->link_speed = 0;
3683                         adapter->link_duplex = 0;
3684                         /* Link status message must follow this format */
3685                         printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
3686                                adapter->netdev->name);
3687                         netif_carrier_off(netdev);
3688                         if (!test_bit(__E1000_DOWN, &adapter->state))
3689                                 mod_timer(&adapter->phy_info_timer,
3690                                           round_jiffies(jiffies + 2 * HZ));
3691
3692                         if (adapter->flags & FLAG_RX_NEEDS_RESTART)
3693                                 schedule_work(&adapter->reset_task);
3694                 }
3695         }
3696
3697 link_up:
3698         e1000e_update_stats(adapter);
3699
3700         mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
3701         adapter->tpt_old = adapter->stats.tpt;
3702         mac->collision_delta = adapter->stats.colc - adapter->colc_old;
3703         adapter->colc_old = adapter->stats.colc;
3704
3705         adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
3706         adapter->gorc_old = adapter->stats.gorc;
3707         adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
3708         adapter->gotc_old = adapter->stats.gotc;
3709
3710         e1000e_update_adaptive(&adapter->hw);
3711
3712         if (!netif_carrier_ok(netdev)) {
3713                 tx_pending = (e1000_desc_unused(tx_ring) + 1 <
3714                                tx_ring->count);
3715                 if (tx_pending) {
3716                         /*
3717                          * We've lost link, so the controller stops DMA,
3718                          * but we've got queued Tx work that's never going
3719                          * to get done, so reset controller to flush Tx.
3720                          * (Do the reset outside of interrupt context).
3721                          */
3722                         adapter->tx_timeout_count++;
3723                         schedule_work(&adapter->reset_task);
3724                         /* return immediately since reset is imminent */
3725                         return;
3726                 }
3727         }
3728
3729         /* Cause software interrupt to ensure Rx ring is cleaned */
3730         if (adapter->msix_entries)
3731                 ew32(ICS, adapter->rx_ring->ims_val);
3732         else
3733                 ew32(ICS, E1000_ICS_RXDMT0);
3734
3735         /* Force detection of hung controller every watchdog period */
3736         adapter->detect_tx_hung = 1;
3737
3738         /*
3739          * With 82571 controllers, LAA may be overwritten due to controller
3740          * reset from the other port. Set the appropriate LAA in RAR[0]
3741          */
3742         if (e1000e_get_laa_state_82571(hw))
3743                 e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
3744
3745         /* Reset the timer */
3746         if (!test_bit(__E1000_DOWN, &adapter->state))
3747                 mod_timer(&adapter->watchdog_timer,
3748                           round_jiffies(jiffies + 2 * HZ));
3749 }
3750
3751 #define E1000_TX_FLAGS_CSUM             0x00000001
3752 #define E1000_TX_FLAGS_VLAN             0x00000002
3753 #define E1000_TX_FLAGS_TSO              0x00000004
3754 #define E1000_TX_FLAGS_IPV4             0x00000008
3755 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
3756 #define E1000_TX_FLAGS_VLAN_SHIFT       16
3757
3758 static int e1000_tso(struct e1000_adapter *adapter,
3759                      struct sk_buff *skb)
3760 {
3761         struct e1000_ring *tx_ring = adapter->tx_ring;
3762         struct e1000_context_desc *context_desc;
3763         struct e1000_buffer *buffer_info;
3764         unsigned int i;
3765         u32 cmd_length = 0;
3766         u16 ipcse = 0, tucse, mss;
3767         u8 ipcss, ipcso, tucss, tucso, hdr_len;
3768         int err;
3769
3770         if (!skb_is_gso(skb))
3771                 return 0;
3772
3773         if (skb_header_cloned(skb)) {
3774                 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
3775                 if (err)
3776                         return err;
3777         }
3778
3779         hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3780         mss = skb_shinfo(skb)->gso_size;
3781         if (skb->protocol == htons(ETH_P_IP)) {
3782                 struct iphdr *iph = ip_hdr(skb);
3783                 iph->tot_len = 0;
3784                 iph->check = 0;
3785                 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
3786                                                          0, IPPROTO_TCP, 0);
3787                 cmd_length = E1000_TXD_CMD_IP;
3788                 ipcse = skb_transport_offset(skb) - 1;
3789         } else if (skb_is_gso_v6(skb)) {
3790                 ipv6_hdr(skb)->payload_len = 0;
3791                 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
3792                                                        &ipv6_hdr(skb)->daddr,
3793                                                        0, IPPROTO_TCP, 0);
3794                 ipcse = 0;
3795         }
3796         ipcss = skb_network_offset(skb);
3797         ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
3798         tucss = skb_transport_offset(skb);
3799         tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
3800         tucse = 0;
3801
3802         cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
3803                        E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
3804
3805         i = tx_ring->next_to_use;
3806         context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
3807         buffer_info = &tx_ring->buffer_info[i];
3808
3809         context_desc->lower_setup.ip_fields.ipcss  = ipcss;
3810         context_desc->lower_setup.ip_fields.ipcso  = ipcso;
3811         context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
3812         context_desc->upper_setup.tcp_fields.tucss = tucss;
3813         context_desc->upper_setup.tcp_fields.tucso = tucso;
3814         context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
3815         context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
3816         context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
3817         context_desc->cmd_and_length = cpu_to_le32(cmd_length);
3818
3819         buffer_info->time_stamp = jiffies;
3820         buffer_info->next_to_watch = i;
3821
3822         i++;
3823         if (i == tx_ring->count)
3824                 i = 0;
3825         tx_ring->next_to_use = i;
3826
3827         return 1;
3828 }
3829
3830 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
3831 {
3832         struct e1000_ring *tx_ring = adapter->tx_ring;
3833         struct e1000_context_desc *context_desc;
3834         struct e1000_buffer *buffer_info;
3835         unsigned int i;
3836         u8 css;
3837         u32 cmd_len = E1000_TXD_CMD_DEXT;
3838         __be16 protocol;
3839
3840         if (skb->ip_summed != CHECKSUM_PARTIAL)
3841                 return 0;
3842
3843         if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
3844                 protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
3845         else
3846                 protocol = skb->protocol;
3847
3848         switch (protocol) {
3849         case cpu_to_be16(ETH_P_IP):
3850                 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
3851                         cmd_len |= E1000_TXD_CMD_TCP;
3852                 break;
3853         case cpu_to_be16(ETH_P_IPV6):
3854                 /* XXX not handling all IPV6 headers */
3855                 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
3856                         cmd_len |= E1000_TXD_CMD_TCP;
3857                 break;
3858         default:
3859                 if (unlikely(net_ratelimit()))
3860                         e_warn("checksum_partial proto=%x!\n",
3861                                be16_to_cpu(protocol));
3862                 break;
3863         }
3864
3865         css = skb_transport_offset(skb);
3866
3867         i = tx_ring->next_to_use;
3868         buffer_info = &tx_ring->buffer_info[i];
3869         context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
3870
3871         context_desc->lower_setup.ip_config = 0;
3872         context_desc->upper_setup.tcp_fields.tucss = css;
3873         context_desc->upper_setup.tcp_fields.tucso =
3874                                 css + skb->csum_offset;
3875         context_desc->upper_setup.tcp_fields.tucse = 0;
3876         context_desc->tcp_seg_setup.data = 0;
3877         context_desc->cmd_and_length = cpu_to_le32(cmd_len);
3878
3879         buffer_info->time_stamp = jiffies;
3880         buffer_info->next_to_watch = i;
3881
3882         i++;
3883         if (i == tx_ring->count)
3884                 i = 0;
3885         tx_ring->next_to_use = i;
3886
3887         return 1;
3888 }
3889
3890 #define E1000_MAX_PER_TXD       8192
3891 #define E1000_MAX_TXD_PWR       12
3892
3893 static int e1000_tx_map(struct e1000_adapter *adapter,
3894                         struct sk_buff *skb, unsigned int first,
3895                         unsigned int max_per_txd, unsigned int nr_frags,
3896                         unsigned int mss)
3897 {
3898         struct e1000_ring *tx_ring = adapter->tx_ring;
3899         struct pci_dev *pdev = adapter->pdev;
3900         struct e1000_buffer *buffer_info;
3901         unsigned int len = skb_headlen(skb);
3902         unsigned int offset = 0, size, count = 0, i;
3903         unsigned int f;
3904
3905         i = tx_ring->next_to_use;
3906
3907         while (len) {
3908                 buffer_info = &tx_ring->buffer_info[i];
3909                 size = min(len, max_per_txd);
3910
3911                 buffer_info->length = size;
3912                 buffer_info->time_stamp = jiffies;
3913                 buffer_info->next_to_watch = i;
3914                 buffer_info->dma = pci_map_single(pdev, skb->data + offset,
3915                                                   size, PCI_DMA_TODEVICE);
3916                 buffer_info->mapped_as_page = false;
3917                 if (pci_dma_mapping_error(pdev, buffer_info->dma))
3918                         goto dma_error;
3919
3920                 len -= size;
3921                 offset += size;
3922                 count++;
3923
3924                 if (len) {
3925                         i++;
3926                         if (i == tx_ring->count)
3927                                 i = 0;
3928                 }
3929         }
3930
3931         for (f = 0; f < nr_frags; f++) {
3932                 struct skb_frag_struct *frag;
3933
3934                 frag = &skb_shinfo(skb)->frags[f];
3935                 len = frag->size;
3936                 offset = frag->page_offset;
3937
3938                 while (len) {
3939                         i++;
3940                         if (i == tx_ring->count)
3941                                 i = 0;
3942
3943                         buffer_info = &tx_ring->buffer_info[i];
3944                         size = min(len, max_per_txd);
3945
3946                         buffer_info->length = size;
3947                         buffer_info->time_stamp = jiffies;
3948                         buffer_info->next_to_watch = i;
3949                         buffer_info->dma = pci_map_page(pdev, frag->page,
3950                                                         offset, size,
3951                                                         PCI_DMA_TODEVICE);
3952                         buffer_info->mapped_as_page = true;
3953                         if (pci_dma_mapping_error(pdev, buffer_info->dma))
3954                                 goto dma_error;
3955
3956                         len -= size;
3957                         offset += size;
3958                         count++;
3959                 }
3960         }
3961
3962         tx_ring->buffer_info[i].skb = skb;
3963         tx_ring->buffer_info[first].next_to_watch = i;
3964
3965         return count;
3966
3967 dma_error:
3968         dev_err(&pdev->dev, "TX DMA map failed\n");
3969         buffer_info->dma = 0;
3970         if (count)
3971                 count--;
3972
3973         while (count--) {
3974                 if (i==0)
3975                         i += tx_ring->count;
3976                 i--;
3977                 buffer_info = &tx_ring->buffer_info[i];
3978                 e1000_put_txbuf(adapter, buffer_info);;
3979         }
3980
3981         return 0;
3982 }
3983
3984 static void e1000_tx_queue(struct e1000_adapter *adapter,
3985                            int tx_flags, int count)
3986 {
3987         struct e1000_ring *tx_ring = adapter->tx_ring;
3988         struct e1000_tx_desc *tx_desc = NULL;
3989         struct e1000_buffer *buffer_info;
3990         u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3991         unsigned int i;
3992
3993         if (tx_flags & E1000_TX_FLAGS_TSO) {
3994                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3995                              E1000_TXD_CMD_TSE;
3996                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3997
3998                 if (tx_flags & E1000_TX_FLAGS_IPV4)
3999                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
4000         }
4001
4002         if (tx_flags & E1000_TX_FLAGS_CSUM) {
4003                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
4004                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4005         }
4006
4007         if (tx_flags & E1000_TX_FLAGS_VLAN) {
4008                 txd_lower |= E1000_TXD_CMD_VLE;
4009                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
4010         }
4011
4012         i = tx_ring->next_to_use;
4013
4014         while (count--) {
4015                 buffer_info = &tx_ring->buffer_info[i];
4016                 tx_desc = E1000_TX_DESC(*tx_ring, i);
4017                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4018                 tx_desc->lower.data =
4019                         cpu_to_le32(txd_lower | buffer_info->length);
4020                 tx_desc->upper.data = cpu_to_le32(txd_upper);
4021
4022                 i++;
4023                 if (i == tx_ring->count)
4024                         i = 0;
4025         }
4026
4027         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
4028
4029         /*
4030          * Force memory writes to complete before letting h/w
4031          * know there are new descriptors to fetch.  (Only
4032          * applicable for weak-ordered memory model archs,
4033          * such as IA-64).
4034          */
4035         wmb();
4036
4037         tx_ring->next_to_use = i;
4038         writel(i, adapter->hw.hw_addr + tx_ring->tail);
4039         /*
4040          * we need this if more than one processor can write to our tail
4041          * at a time, it synchronizes IO on IA64/Altix systems
4042          */
4043         mmiowb();
4044 }
4045
4046 #define MINIMUM_DHCP_PACKET_SIZE 282
4047 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
4048                                     struct sk_buff *skb)
4049 {
4050         struct e1000_hw *hw =  &adapter->hw;
4051         u16 length, offset;
4052
4053         if (vlan_tx_tag_present(skb)) {
4054                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
4055                     (adapter->hw.mng_cookie.status &
4056                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
4057                         return 0;
4058         }
4059
4060         if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
4061                 return 0;
4062
4063         if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
4064                 return 0;
4065
4066         {
4067                 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
4068                 struct udphdr *udp;
4069
4070                 if (ip->protocol != IPPROTO_UDP)
4071                         return 0;
4072
4073                 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
4074                 if (ntohs(udp->dest) != 67)
4075                         return 0;
4076
4077                 offset = (u8 *)udp + 8 - skb->data;
4078                 length = skb->len - offset;
4079                 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
4080         }
4081
4082         return 0;
4083 }
4084
4085 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
4086 {
4087         struct e1000_adapter *adapter = netdev_priv(netdev);
4088
4089         netif_stop_queue(netdev);
4090         /*
4091          * Herbert's original patch had:
4092          *  smp_mb__after_netif_stop_queue();
4093          * but since that doesn't exist yet, just open code it.
4094          */
4095         smp_mb();
4096
4097         /*
4098          * We need to check again in a case another CPU has just
4099          * made room available.
4100          */
4101         if (e1000_desc_unused(adapter->tx_ring) < size)
4102                 return -EBUSY;
4103
4104         /* A reprieve! */
4105         netif_start_queue(netdev);
4106         ++adapter->restart_queue;
4107         return 0;
4108 }
4109
4110 static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
4111 {
4112         struct e1000_adapter *adapter = netdev_priv(netdev);
4113
4114         if (e1000_desc_unused(adapter->tx_ring) >= size)
4115                 return 0;
4116         return __e1000_maybe_stop_tx(netdev, size);
4117 }
4118
4119 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
4120 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
4121                                     struct net_device *netdev)
4122 {
4123         struct e1000_adapter *adapter = netdev_priv(netdev);
4124         struct e1000_ring *tx_ring = adapter->tx_ring;
4125         unsigned int first;
4126         unsigned int max_per_txd = E1000_MAX_PER_TXD;
4127         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
4128         unsigned int tx_flags = 0;
4129         unsigned int len = skb->len - skb->data_len;
4130         unsigned int nr_frags;
4131         unsigned int mss;
4132         int count = 0;
4133         int tso;
4134         unsigned int f;
4135
4136         if (test_bit(__E1000_DOWN, &adapter->state)) {
4137                 dev_kfree_skb_any(skb);
4138                 return NETDEV_TX_OK;
4139         }
4140
4141         if (skb->len <= 0) {
4142                 dev_kfree_skb_any(skb);
4143                 return NETDEV_TX_OK;
4144         }
4145
4146         mss = skb_shinfo(skb)->gso_size;
4147         /*
4148          * The controller does a simple calculation to
4149          * make sure there is enough room in the FIFO before
4150          * initiating the DMA for each buffer.  The calc is:
4151          * 4 = ceil(buffer len/mss).  To make sure we don't
4152          * overrun the FIFO, adjust the max buffer len if mss
4153          * drops.
4154          */
4155         if (mss) {
4156                 u8 hdr_len;
4157                 max_per_txd = min(mss << 2, max_per_txd);
4158                 max_txd_pwr = fls(max_per_txd) - 1;
4159
4160                 /*
4161                  * TSO Workaround for 82571/2/3 Controllers -- if skb->data
4162                  * points to just header, pull a few bytes of payload from
4163                  * frags into skb->data
4164                  */
4165                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4166                 /*
4167                  * we do this workaround for ES2LAN, but it is un-necessary,
4168                  * avoiding it could save a lot of cycles
4169                  */
4170                 if (skb->data_len && (hdr_len == len)) {
4171                         unsigned int pull_size;
4172
4173                         pull_size = min((unsigned int)4, skb->data_len);
4174                         if (!__pskb_pull_tail(skb, pull_size)) {
4175                                 e_err("__pskb_pull_tail failed.\n");
4176                                 dev_kfree_skb_any(skb);
4177                                 return NETDEV_TX_OK;
4178                         }
4179                         len = skb->len - skb->data_len;
4180                 }
4181         }
4182
4183         /* reserve a descriptor for the offload context */
4184         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
4185                 count++;
4186         count++;
4187
4188         count += TXD_USE_COUNT(len, max_txd_pwr);
4189
4190         nr_frags = skb_shinfo(skb)->nr_frags;
4191         for (f = 0; f < nr_frags; f++)
4192                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
4193                                        max_txd_pwr);
4194
4195         if (adapter->hw.mac.tx_pkt_filtering)
4196                 e1000_transfer_dhcp_info(adapter, skb);
4197
4198         /*
4199          * need: count + 2 desc gap to keep tail from touching
4200          * head, otherwise try next time
4201          */
4202         if (e1000_maybe_stop_tx(netdev, count + 2))
4203                 return NETDEV_TX_BUSY;
4204
4205         if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
4206                 tx_flags |= E1000_TX_FLAGS_VLAN;
4207                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
4208         }
4209
4210         first = tx_ring->next_to_use;
4211
4212         tso = e1000_tso(adapter, skb);
4213         if (tso < 0) {
4214                 dev_kfree_skb_any(skb);
4215                 return NETDEV_TX_OK;
4216         }
4217
4218         if (tso)
4219                 tx_flags |= E1000_TX_FLAGS_TSO;
4220         else if (e1000_tx_csum(adapter, skb))
4221                 tx_flags |= E1000_TX_FLAGS_CSUM;
4222
4223         /*
4224          * Old method was to assume IPv4 packet by default if TSO was enabled.
4225          * 82571 hardware supports TSO capabilities for IPv6 as well...
4226          * no longer assume, we must.
4227          */
4228         if (skb->protocol == htons(ETH_P_IP))
4229                 tx_flags |= E1000_TX_FLAGS_IPV4;
4230
4231         /* if count is 0 then mapping error has occured */
4232         count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
4233         if (count) {
4234                 e1000_tx_queue(adapter, tx_flags, count);
4235                 /* Make sure there is space in the ring for the next send. */
4236                 e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
4237
4238         } else {
4239                 dev_kfree_skb_any(skb);
4240                 tx_ring->buffer_info[first].time_stamp = 0;
4241                 tx_ring->next_to_use = first;
4242         }
4243
4244         return NETDEV_TX_OK;
4245 }
4246
4247 /**
4248  * e1000_tx_timeout - Respond to a Tx Hang
4249  * @netdev: network interface device structure
4250  **/
4251 static void e1000_tx_timeout(struct net_device *netdev)
4252 {
4253         struct e1000_adapter *adapter = netdev_priv(netdev);
4254
4255         /* Do the reset outside of interrupt context */
4256         adapter->tx_timeout_count++;
4257         schedule_work(&adapter->reset_task);
4258 }
4259
4260 static void e1000_reset_task(struct work_struct *work)
4261 {
4262         struct e1000_adapter *adapter;
4263         adapter = container_of(work, struct e1000_adapter, reset_task);
4264
4265         e1000e_reinit_locked(adapter);
4266 }
4267
4268 /**
4269  * e1000_get_stats - Get System Network Statistics
4270  * @netdev: network interface device structure
4271  *
4272  * Returns the address of the device statistics structure.
4273  * The statistics are actually updated from the timer callback.
4274  **/
4275 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
4276 {
4277         /* only return the current stats */
4278         return &netdev->stats;
4279 }
4280
4281 /**
4282  * e1000_change_mtu - Change the Maximum Transfer Unit
4283  * @netdev: network interface device structure
4284  * @new_mtu: new value for maximum frame size
4285  *
4286  * Returns 0 on success, negative on failure
4287  **/
4288 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
4289 {
4290         struct e1000_adapter *adapter = netdev_priv(netdev);
4291         int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
4292
4293         /* Jumbo frame support */
4294         if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
4295             !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
4296                 e_err("Jumbo Frames not supported.\n");
4297                 return -EINVAL;
4298         }
4299
4300         /* Supported frame sizes */
4301         if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
4302             (max_frame > adapter->max_hw_frame_size)) {
4303                 e_err("Unsupported MTU setting\n");
4304                 return -EINVAL;
4305         }
4306
4307         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
4308                 msleep(1);
4309         /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
4310         adapter->max_frame_size = max_frame;
4311         e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
4312         netdev->mtu = new_mtu;
4313         if (netif_running(netdev))
4314                 e1000e_down(adapter);
4315
4316         /*
4317          * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
4318          * means we reserve 2 more, this pushes us to allocate from the next
4319          * larger slab size.
4320          * i.e. RXBUFFER_2048 --> size-4096 slab
4321          * However with the new *_jumbo_rx* routines, jumbo receives will use
4322          * fragmented skbs
4323          */
4324
4325         if (max_frame <= 2048)
4326                 adapter->rx_buffer_len = 2048;
4327         else
4328                 adapter->rx_buffer_len = 4096;
4329
4330         /* adjust allocation if LPE protects us, and we aren't using SBP */
4331         if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
4332              (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
4333                 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
4334                                          + ETH_FCS_LEN;
4335
4336         if (netif_running(netdev))
4337                 e1000e_up(adapter);
4338         else
4339                 e1000e_reset(adapter);
4340
4341         clear_bit(__E1000_RESETTING, &adapter->state);
4342
4343         return 0;
4344 }
4345
4346 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4347                            int cmd)
4348 {
4349         struct e1000_adapter *adapter = netdev_priv(netdev);
4350         struct mii_ioctl_data *data = if_mii(ifr);
4351
4352         if (adapter->hw.phy.media_type != e1000_media_type_copper)
4353                 return -EOPNOTSUPP;
4354
4355         switch (cmd) {
4356         case SIOCGMIIPHY:
4357                 data->phy_id = adapter->hw.phy.addr;
4358                 break;
4359         case SIOCGMIIREG:
4360                 e1000_phy_read_status(adapter);
4361
4362                 switch (data->reg_num & 0x1F) {
4363                 case MII_BMCR:
4364                         data->val_out = adapter->phy_regs.bmcr;
4365                         break;
4366                 case MII_BMSR:
4367                         data->val_out = adapter->phy_regs.bmsr;
4368                         break;
4369                 case MII_PHYSID1:
4370                         data->val_out = (adapter->hw.phy.id >> 16);
4371                         break;
4372                 case MII_PHYSID2:
4373                         data->val_out = (adapter->hw.phy.id & 0xFFFF);
4374                         break;
4375                 case MII_ADVERTISE:
4376                         data->val_out = adapter->phy_regs.advertise;
4377                         break;
4378                 case MII_LPA:
4379                         data->val_out = adapter->phy_regs.lpa;
4380                         break;
4381                 case MII_EXPANSION:
4382                         data->val_out = adapter->phy_regs.expansion;
4383                         break;
4384                 case MII_CTRL1000:
4385                         data->val_out = adapter->phy_regs.ctrl1000;
4386                         break;
4387                 case MII_STAT1000:
4388                         data->val_out = adapter->phy_regs.stat1000;
4389                         break;
4390                 case MII_ESTATUS:
4391                         data->val_out = adapter->phy_regs.estatus;
4392                         break;
4393                 default:
4394                         return -EIO;
4395                 }
4396                 break;
4397         case SIOCSMIIREG:
4398         default:
4399                 return -EOPNOTSUPP;
4400         }
4401         return 0;
4402 }
4403
4404 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4405 {
4406         switch (cmd) {
4407         case SIOCGMIIPHY:
4408         case SIOCGMIIREG:
4409         case SIOCSMIIREG:
4410                 return e1000_mii_ioctl(netdev, ifr, cmd);
4411         default:
4412                 return -EOPNOTSUPP;
4413         }
4414 }
4415
4416 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
4417 {
4418         struct e1000_hw *hw = &adapter->hw;
4419         u32 i, mac_reg;
4420         u16 phy_reg;
4421         int retval = 0;
4422
4423         /* copy MAC RARs to PHY RARs */
4424         for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
4425                 mac_reg = er32(RAL(i));
4426                 e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
4427                 e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
4428                 mac_reg = er32(RAH(i));
4429                 e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
4430                 e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
4431         }
4432
4433         /* copy MAC MTA to PHY MTA */
4434         for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
4435                 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
4436                 e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
4437                 e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
4438         }
4439
4440         /* configure PHY Rx Control register */
4441         e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
4442         mac_reg = er32(RCTL);
4443         if (mac_reg & E1000_RCTL_UPE)
4444                 phy_reg |= BM_RCTL_UPE;
4445         if (mac_reg & E1000_RCTL_MPE)
4446                 phy_reg |= BM_RCTL_MPE;
4447         phy_reg &= ~(BM_RCTL_MO_MASK);
4448         if (mac_reg & E1000_RCTL_MO_3)
4449                 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
4450                                 << BM_RCTL_MO_SHIFT);
4451         if (mac_reg & E1000_RCTL_BAM)
4452                 phy_reg |= BM_RCTL_BAM;
4453         if (mac_reg & E1000_RCTL_PMCF)
4454                 phy_reg |= BM_RCTL_PMCF;
4455         mac_reg = er32(CTRL);
4456         if (mac_reg & E1000_CTRL_RFCE)
4457                 phy_reg |= BM_RCTL_RFCE;
4458         e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
4459
4460         /* enable PHY wakeup in MAC register */
4461         ew32(WUFC, wufc);
4462         ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
4463
4464         /* configure and enable PHY wakeup in PHY registers */
4465         e1e_wphy(&adapter->hw, BM_WUFC, wufc);
4466         e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
4467
4468         /* activate PHY wakeup */
4469         retval = hw->phy.ops.acquire(hw);
4470         if (retval) {
4471                 e_err("Could not acquire PHY\n");
4472                 return retval;
4473         }
4474         e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4475                                  (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
4476         retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
4477         if (retval) {
4478                 e_err("Could not read PHY page 769\n");
4479                 goto out;
4480         }
4481         phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
4482         retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
4483         if (retval)
4484                 e_err("Could not set PHY Host Wakeup bit\n");
4485 out:
4486         hw->phy.ops.release(hw);
4487
4488         return retval;
4489 }
4490
4491 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
4492 {
4493         struct net_device *netdev = pci_get_drvdata(pdev);
4494         struct e1000_adapter *adapter = netdev_priv(netdev);
4495         struct e1000_hw *hw = &adapter->hw;
4496         u32 ctrl, ctrl_ext, rctl, status;
4497         u32 wufc = adapter->wol;
4498         int retval = 0;
4499
4500         netif_device_detach(netdev);
4501
4502         if (netif_running(netdev)) {
4503                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
4504                 e1000e_down(adapter);
4505                 e1000_free_irq(adapter);
4506         }
4507         e1000e_reset_interrupt_capability(adapter);
4508
4509         retval = pci_save_state(pdev);
4510         if (retval)
4511                 return retval;
4512
4513         status = er32(STATUS);
4514         if (status & E1000_STATUS_LU)
4515                 wufc &= ~E1000_WUFC_LNKC;
4516
4517         if (wufc) {
4518                 e1000_setup_rctl(adapter);
4519                 e1000_set_multi(netdev);
4520
4521                 /* turn on all-multi mode if wake on multicast is enabled */
4522                 if (wufc & E1000_WUFC_MC) {
4523                         rctl = er32(RCTL);
4524                         rctl |= E1000_RCTL_MPE;
4525                         ew32(RCTL, rctl);
4526                 }
4527
4528                 ctrl = er32(CTRL);
4529                 /* advertise wake from D3Cold */
4530                 #define E1000_CTRL_ADVD3WUC 0x00100000
4531                 /* phy power management enable */
4532                 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4533                 ctrl |= E1000_CTRL_ADVD3WUC;
4534                 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
4535                         ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
4536                 ew32(CTRL, ctrl);
4537
4538                 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
4539                     adapter->hw.phy.media_type ==
4540                     e1000_media_type_internal_serdes) {
4541                         /* keep the laser running in D3 */
4542                         ctrl_ext = er32(CTRL_EXT);
4543                         ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
4544                         ew32(CTRL_EXT, ctrl_ext);
4545                 }
4546
4547                 if (adapter->flags & FLAG_IS_ICH)
4548                         e1000e_disable_gig_wol_ich8lan(&adapter->hw);
4549
4550                 /* Allow time for pending master requests to run */
4551                 e1000e_disable_pcie_master(&adapter->hw);
4552
4553                 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
4554                         /* enable wakeup by the PHY */
4555                         retval = e1000_init_phy_wakeup(adapter, wufc);
4556                         if (retval)
4557                                 return retval;
4558                 } else {
4559                         /* enable wakeup by the MAC */
4560                         ew32(WUFC, wufc);
4561                         ew32(WUC, E1000_WUC_PME_EN);
4562                 }
4563         } else {
4564                 ew32(WUC, 0);
4565                 ew32(WUFC, 0);
4566         }
4567
4568         *enable_wake = !!wufc;
4569
4570         /* make sure adapter isn't asleep if manageability is enabled */
4571         if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
4572             (hw->mac.ops.check_mng_mode(hw)))
4573                 *enable_wake = true;
4574
4575         if (adapter->hw.phy.type == e1000_phy_igp_3)
4576                 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
4577
4578         /*
4579          * Release control of h/w to f/w.  If f/w is AMT enabled, this
4580          * would have already happened in close and is redundant.
4581          */
4582         e1000_release_hw_control(adapter);
4583
4584         pci_disable_device(pdev);
4585
4586         return 0;
4587 }
4588
4589 static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
4590 {
4591         if (sleep && wake) {
4592                 pci_prepare_to_sleep(pdev);
4593                 return;
4594         }
4595
4596         pci_wake_from_d3(pdev, wake);
4597         pci_set_power_state(pdev, PCI_D3hot);
4598 }
4599
4600 static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
4601                                     bool wake)
4602 {
4603         struct net_device *netdev = pci_get_drvdata(pdev);
4604         struct e1000_adapter *adapter = netdev_priv(netdev);
4605
4606         /*
4607          * The pci-e switch on some quad port adapters will report a
4608          * correctable error when the MAC transitions from D0 to D3.  To
4609          * prevent this we need to mask off the correctable errors on the
4610          * downstream port of the pci-e switch.
4611          */
4612         if (adapter->flags & FLAG_IS_QUAD_PORT) {
4613                 struct pci_dev *us_dev = pdev->bus->self;
4614                 int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
4615                 u16 devctl;
4616
4617                 pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
4618                 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
4619                                       (devctl & ~PCI_EXP_DEVCTL_CERE));
4620
4621                 e1000_power_off(pdev, sleep, wake);
4622
4623                 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
4624         } else {
4625                 e1000_power_off(pdev, sleep, wake);
4626         }
4627 }
4628
4629 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
4630 {
4631         int pos;
4632         u16 val;
4633
4634         /*
4635          * 82573 workaround - disable L1 ASPM on mobile chipsets
4636          *
4637          * L1 ASPM on various mobile (ich7) chipsets do not behave properly
4638          * resulting in lost data or garbage information on the pci-e link
4639          * level. This could result in (false) bad EEPROM checksum errors,
4640          * long ping times (up to 2s) or even a system freeze/hang.
4641          *
4642          * Unfortunately this feature saves about 1W power consumption when
4643          * active.
4644          */
4645         pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
4646         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
4647         if (val & 0x2) {
4648                 dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
4649                 val &= ~0x2;
4650                 pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val);
4651         }
4652 }
4653
4654 #ifdef CONFIG_PM
4655 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4656 {
4657         int retval;
4658         bool wake;
4659
4660         retval = __e1000_shutdown(pdev, &wake);
4661         if (!retval)
4662                 e1000_complete_shutdown(pdev, true, wake);
4663
4664         return retval;
4665 }
4666
4667 static int e1000_resume(struct pci_dev *pdev)
4668 {
4669         struct net_device *netdev = pci_get_drvdata(pdev);
4670         struct e1000_adapter *adapter = netdev_priv(netdev);
4671         struct e1000_hw *hw = &adapter->hw;
4672         u32 err;
4673
4674         pci_set_power_state(pdev, PCI_D0);
4675         pci_restore_state(pdev);
4676         pci_save_state(pdev);
4677         e1000e_disable_l1aspm(pdev);
4678
4679         err = pci_enable_device_mem(pdev);
4680         if (err) {
4681                 dev_err(&pdev->dev,
4682                         "Cannot enable PCI device from suspend\n");
4683                 return err;
4684         }
4685
4686         pci_set_master(pdev);
4687
4688         pci_enable_wake(pdev, PCI_D3hot, 0);
4689         pci_enable_wake(pdev, PCI_D3cold, 0);
4690
4691         e1000e_set_interrupt_capability(adapter);
4692         if (netif_running(netdev)) {
4693                 err = e1000_request_irq(adapter);
4694                 if (err)
4695                         return err;
4696         }
4697
4698         e1000e_power_up_phy(adapter);
4699
4700         /* report the system wakeup cause from S3/S4 */
4701         if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
4702                 u16 phy_data;
4703
4704                 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
4705                 if (phy_data) {
4706                         e_info("PHY Wakeup cause - %s\n",
4707                                 phy_data & E1000_WUS_EX ? "Unicast Packet" :
4708                                 phy_data & E1000_WUS_MC ? "Multicast Packet" :
4709                                 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
4710                                 phy_data & E1000_WUS_MAG ? "Magic Packet" :
4711                                 phy_data & E1000_WUS_LNKC ? "Link Status "
4712                                 " Change" : "other");
4713                 }
4714                 e1e_wphy(&adapter->hw, BM_WUS, ~0);
4715         } else {
4716                 u32 wus = er32(WUS);
4717                 if (wus) {
4718                         e_info("MAC Wakeup cause - %s\n",
4719                                 wus & E1000_WUS_EX ? "Unicast Packet" :
4720                                 wus & E1000_WUS_MC ? "Multicast Packet" :
4721                                 wus & E1000_WUS_BC ? "Broadcast Packet" :
4722                                 wus & E1000_WUS_MAG ? "Magic Packet" :
4723                                 wus & E1000_WUS_LNKC ? "Link Status Change" :
4724                                 "other");
4725                 }
4726                 ew32(WUS, ~0);
4727         }
4728
4729         e1000e_reset(adapter);
4730
4731         e1000_init_manageability(adapter);
4732
4733         if (netif_running(netdev))
4734                 e1000e_up(adapter);
4735
4736         netif_device_attach(netdev);
4737
4738         /*
4739          * If the controller has AMT, do not set DRV_LOAD until the interface
4740          * is up.  For all other cases, let the f/w know that the h/w is now
4741          * under the control of the driver.
4742          */
4743         if (!(adapter->flags & FLAG_HAS_AMT))
4744                 e1000_get_hw_control(adapter);
4745
4746         return 0;
4747 }
4748 #endif
4749
4750 static void e1000_shutdown(struct pci_dev *pdev)
4751 {
4752         bool wake = false;
4753
4754         __e1000_shutdown(pdev, &wake);
4755
4756         if (system_state == SYSTEM_POWER_OFF)
4757                 e1000_complete_shutdown(pdev, false, wake);
4758 }
4759
4760 #ifdef CONFIG_NET_POLL_CONTROLLER
4761 /*
4762  * Polling 'interrupt' - used by things like netconsole to send skbs
4763  * without having to re-enable interrupts. It's not called while
4764  * the interrupt routine is executing.
4765  */
4766 static void e1000_netpoll(struct net_device *netdev)
4767 {
4768         struct e1000_adapter *adapter = netdev_priv(netdev);
4769
4770         disable_irq(adapter->pdev->irq);
4771         e1000_intr(adapter->pdev->irq, netdev);
4772
4773         enable_irq(adapter->pdev->irq);
4774 }
4775 #endif
4776
4777 /**
4778  * e1000_io_error_detected - called when PCI error is detected
4779  * @pdev: Pointer to PCI device
4780  * @state: The current pci connection state
4781  *
4782  * This function is called after a PCI bus error affecting
4783  * this device has been detected.
4784  */
4785 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
4786                                                 pci_channel_state_t state)
4787 {
4788         struct net_device *netdev = pci_get_drvdata(pdev);
4789         struct e1000_adapter *adapter = netdev_priv(netdev);
4790
4791         netif_device_detach(netdev);
4792
4793         if (state == pci_channel_io_perm_failure)
4794                 return PCI_ERS_RESULT_DISCONNECT;
4795
4796         if (netif_running(netdev))
4797                 e1000e_down(adapter);
4798         pci_disable_device(pdev);
4799
4800         /* Request a slot slot reset. */
4801         return PCI_ERS_RESULT_NEED_RESET;
4802 }
4803
4804 /**
4805  * e1000_io_slot_reset - called after the pci bus has been reset.
4806  * @pdev: Pointer to PCI device
4807  *
4808  * Restart the card from scratch, as if from a cold-boot. Implementation
4809  * resembles the first-half of the e1000_resume routine.
4810  */
4811 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4812 {
4813         struct net_device *netdev = pci_get_drvdata(pdev);
4814         struct e1000_adapter *adapter = netdev_priv(netdev);
4815         struct e1000_hw *hw = &adapter->hw;
4816         int err;
4817         pci_ers_result_t result;
4818
4819         e1000e_disable_l1aspm(pdev);
4820         err = pci_enable_device_mem(pdev);
4821         if (err) {
4822                 dev_err(&pdev->dev,
4823                         "Cannot re-enable PCI device after reset.\n");
4824                 result = PCI_ERS_RESULT_DISCONNECT;
4825         } else {
4826                 pci_set_master(pdev);
4827                 pci_restore_state(pdev);
4828                 pci_save_state(pdev);
4829
4830                 pci_enable_wake(pdev, PCI_D3hot, 0);
4831                 pci_enable_wake(pdev, PCI_D3cold, 0);
4832
4833                 e1000e_reset(adapter);
4834                 ew32(WUS, ~0);
4835                 result = PCI_ERS_RESULT_RECOVERED;
4836         }
4837
4838         pci_cleanup_aer_uncorrect_error_status(pdev);
4839
4840         return result;
4841 }
4842
4843 /**
4844  * e1000_io_resume - called when traffic can start flowing again.
4845  * @pdev: Pointer to PCI device
4846  *
4847  * This callback is called when the error recovery driver tells us that
4848  * its OK to resume normal operation. Implementation resembles the
4849  * second-half of the e1000_resume routine.
4850  */
4851 static void e1000_io_resume(struct pci_dev *pdev)
4852 {
4853         struct net_device *netdev = pci_get_drvdata(pdev);
4854         struct e1000_adapter *adapter = netdev_priv(netdev);
4855
4856         e1000_init_manageability(adapter);
4857
4858         if (netif_running(netdev)) {
4859                 if (e1000e_up(adapter)) {
4860                         dev_err(&pdev->dev,
4861                                 "can't bring device back up after reset\n");
4862                         return;
4863                 }
4864         }
4865
4866         netif_device_attach(netdev);
4867
4868         /*
4869          * If the controller has AMT, do not set DRV_LOAD until the interface
4870          * is up.  For all other cases, let the f/w know that the h/w is now
4871          * under the control of the driver.
4872          */
4873         if (!(adapter->flags & FLAG_HAS_AMT))
4874                 e1000_get_hw_control(adapter);
4875
4876 }
4877
4878 static void e1000_print_device_info(struct e1000_adapter *adapter)
4879 {
4880         struct e1000_hw *hw = &adapter->hw;
4881         struct net_device *netdev = adapter->netdev;
4882         u32 pba_num;
4883
4884         /* print bus type/speed/width info */
4885         e_info("(PCI Express:2.5GB/s:%s) %pM\n",
4886                /* bus width */
4887                ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
4888                 "Width x1"),
4889                /* MAC address */
4890                netdev->dev_addr);
4891         e_info("Intel(R) PRO/%s Network Connection\n",
4892                (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
4893         e1000e_read_pba_num(hw, &pba_num);
4894         e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
4895                hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
4896 }
4897
4898 static void e1000_eeprom_checks(struct e1000_adapter *adapter)
4899 {
4900         struct e1000_hw *hw = &adapter->hw;
4901         int ret_val;
4902         u16 buf = 0;
4903
4904         if (hw->mac.type != e1000_82573)
4905                 return;
4906
4907         ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
4908         if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
4909                 /* Deep Smart Power Down (DSPD) */
4910                 dev_warn(&adapter->pdev->dev,
4911                          "Warning: detected DSPD enabled in EEPROM\n");
4912         }
4913
4914         ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
4915         if (!ret_val && (le16_to_cpu(buf) & (3 << 2))) {
4916                 /* ASPM enable */
4917                 dev_warn(&adapter->pdev->dev,
4918                          "Warning: detected ASPM enabled in EEPROM\n");
4919         }
4920 }
4921
4922 static const struct net_device_ops e1000e_netdev_ops = {
4923         .ndo_open               = e1000_open,
4924         .ndo_stop               = e1000_close,
4925         .ndo_start_xmit         = e1000_xmit_frame,
4926         .ndo_get_stats          = e1000_get_stats,
4927         .ndo_set_multicast_list = e1000_set_multi,
4928         .ndo_set_mac_address    = e1000_set_mac,
4929         .ndo_change_mtu         = e1000_change_mtu,
4930         .ndo_do_ioctl           = e1000_ioctl,
4931         .ndo_tx_timeout         = e1000_tx_timeout,
4932         .ndo_validate_addr      = eth_validate_addr,
4933
4934         .ndo_vlan_rx_register   = e1000_vlan_rx_register,
4935         .ndo_vlan_rx_add_vid    = e1000_vlan_rx_add_vid,
4936         .ndo_vlan_rx_kill_vid   = e1000_vlan_rx_kill_vid,
4937 #ifdef CONFIG_NET_POLL_CONTROLLER
4938         .ndo_poll_controller    = e1000_netpoll,
4939 #endif
4940 };
4941
4942 /**
4943  * e1000_probe - Device Initialization Routine
4944  * @pdev: PCI device information struct
4945  * @ent: entry in e1000_pci_tbl
4946  *
4947  * Returns 0 on success, negative on failure
4948  *
4949  * e1000_probe initializes an adapter identified by a pci_dev structure.
4950  * The OS initialization, configuring of the adapter private structure,
4951  * and a hardware reset occur.
4952  **/
4953 static int __devinit e1000_probe(struct pci_dev *pdev,
4954                                  const struct pci_device_id *ent)
4955 {
4956         struct net_device *netdev;
4957         struct e1000_adapter *adapter;
4958         struct e1000_hw *hw;
4959         const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
4960         resource_size_t mmio_start, mmio_len;
4961         resource_size_t flash_start, flash_len;
4962
4963         static int cards_found;
4964         int i, err, pci_using_dac;
4965         u16 eeprom_data = 0;
4966         u16 eeprom_apme_mask = E1000_EEPROM_APME;
4967
4968         e1000e_disable_l1aspm(pdev);
4969
4970         err = pci_enable_device_mem(pdev);
4971         if (err)
4972                 return err;
4973
4974         pci_using_dac = 0;
4975         err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
4976         if (!err) {
4977                 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4978                 if (!err)
4979                         pci_using_dac = 1;
4980         } else {
4981                 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4982                 if (err) {
4983                         err = pci_set_consistent_dma_mask(pdev,
4984                                                           DMA_BIT_MASK(32));
4985                         if (err) {
4986                                 dev_err(&pdev->dev, "No usable DMA "
4987                                         "configuration, aborting\n");
4988                                 goto err_dma;
4989                         }
4990                 }
4991         }
4992
4993         err = pci_request_selected_regions_exclusive(pdev,
4994                                           pci_select_bars(pdev, IORESOURCE_MEM),
4995                                           e1000e_driver_name);
4996         if (err)
4997                 goto err_pci_reg;
4998
4999         /* AER (Advanced Error Reporting) hooks */
5000         pci_enable_pcie_error_reporting(pdev);
5001
5002         pci_set_master(pdev);
5003         /* PCI config space info */
5004         err = pci_save_state(pdev);
5005         if (err)
5006                 goto err_alloc_etherdev;
5007
5008         err = -ENOMEM;
5009         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
5010         if (!netdev)
5011                 goto err_alloc_etherdev;
5012
5013         SET_NETDEV_DEV(netdev, &pdev->dev);
5014
5015         pci_set_drvdata(pdev, netdev);
5016         adapter = netdev_priv(netdev);
5017         hw = &adapter->hw;
5018         adapter->netdev = netdev;
5019         adapter->pdev = pdev;
5020         adapter->ei = ei;
5021         adapter->pba = ei->pba;
5022         adapter->flags = ei->flags;
5023         adapter->flags2 = ei->flags2;
5024         adapter->hw.adapter = adapter;
5025         adapter->hw.mac.type = ei->mac;
5026         adapter->max_hw_frame_size = ei->max_hw_frame_size;
5027         adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
5028
5029         mmio_start = pci_resource_start(pdev, 0);
5030         mmio_len = pci_resource_len(pdev, 0);
5031
5032         err = -EIO;
5033         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
5034         if (!adapter->hw.hw_addr)
5035                 goto err_ioremap;
5036
5037         if ((adapter->flags & FLAG_HAS_FLASH) &&
5038             (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
5039                 flash_start = pci_resource_start(pdev, 1);
5040                 flash_len = pci_resource_len(pdev, 1);
5041                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
5042                 if (!adapter->hw.flash_address)
5043                         goto err_flashmap;
5044         }
5045
5046         /* construct the net_device struct */
5047         netdev->netdev_ops              = &e1000e_netdev_ops;
5048         e1000e_set_ethtool_ops(netdev);
5049         netdev->watchdog_timeo          = 5 * HZ;
5050         netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
5051         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
5052
5053         netdev->mem_start = mmio_start;
5054         netdev->mem_end = mmio_start + mmio_len;
5055
5056         adapter->bd_number = cards_found++;
5057
5058         e1000e_check_options(adapter);
5059
5060         /* setup adapter struct */
5061         err = e1000_sw_init(adapter);
5062         if (err)
5063                 goto err_sw_init;
5064
5065         err = -EIO;
5066
5067         memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
5068         memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
5069         memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
5070
5071         err = ei->get_variants(adapter);
5072         if (err)
5073                 goto err_hw_init;
5074
5075         if ((adapter->flags & FLAG_IS_ICH) &&
5076             (adapter->flags & FLAG_READ_ONLY_NVM))
5077                 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
5078
5079         hw->mac.ops.get_bus_info(&adapter->hw);
5080
5081         adapter->hw.phy.autoneg_wait_to_complete = 0;
5082
5083         /* Copper options */
5084         if (adapter->hw.phy.media_type == e1000_media_type_copper) {
5085                 adapter->hw.phy.mdix = AUTO_ALL_MODES;
5086                 adapter->hw.phy.disable_polarity_correction = 0;
5087                 adapter->hw.phy.ms_type = e1000_ms_hw_default;
5088         }
5089
5090         if (e1000_check_reset_block(&adapter->hw))
5091                 e_info("PHY reset is blocked due to SOL/IDER session.\n");
5092
5093         netdev->features = NETIF_F_SG |
5094                            NETIF_F_HW_CSUM |
5095                            NETIF_F_HW_VLAN_TX |
5096                            NETIF_F_HW_VLAN_RX;
5097
5098         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
5099                 netdev->features |= NETIF_F_HW_VLAN_FILTER;
5100
5101         netdev->features |= NETIF_F_TSO;
5102         netdev->features |= NETIF_F_TSO6;
5103
5104         netdev->vlan_features |= NETIF_F_TSO;
5105         netdev->vlan_features |= NETIF_F_TSO6;
5106         netdev->vlan_features |= NETIF_F_HW_CSUM;
5107         netdev->vlan_features |= NETIF_F_SG;
5108
5109         if (pci_using_dac)
5110                 netdev->features |= NETIF_F_HIGHDMA;
5111
5112         if (e1000e_enable_mng_pass_thru(&adapter->hw))
5113                 adapter->flags |= FLAG_MNG_PT_ENABLED;
5114
5115         /*
5116          * before reading the NVM, reset the controller to
5117          * put the device in a known good starting state
5118          */
5119         adapter->hw.mac.ops.reset_hw(&adapter->hw);
5120
5121         /*
5122          * systems with ASPM and others may see the checksum fail on the first
5123          * attempt. Let's give it a few tries
5124          */
5125         for (i = 0;; i++) {
5126                 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
5127                         break;
5128                 if (i == 2) {
5129                         e_err("The NVM Checksum Is Not Valid\n");
5130                         err = -EIO;
5131                         goto err_eeprom;
5132                 }
5133         }
5134
5135         e1000_eeprom_checks(adapter);
5136
5137         /* copy the MAC address out of the NVM */
5138         if (e1000e_read_mac_addr(&adapter->hw))
5139                 e_err("NVM Read Error while reading MAC address\n");
5140
5141         memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
5142         memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
5143
5144         if (!is_valid_ether_addr(netdev->perm_addr)) {
5145                 e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
5146                 err = -EIO;
5147                 goto err_eeprom;
5148         }
5149
5150         init_timer(&adapter->watchdog_timer);
5151         adapter->watchdog_timer.function = &e1000_watchdog;
5152         adapter->watchdog_timer.data = (unsigned long) adapter;
5153
5154         init_timer(&adapter->phy_info_timer);
5155         adapter->phy_info_timer.function = &e1000_update_phy_info;
5156         adapter->phy_info_timer.data = (unsigned long) adapter;
5157
5158         INIT_WORK(&adapter->reset_task, e1000_reset_task);
5159         INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
5160         INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
5161         INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
5162         INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
5163
5164         /* Initialize link parameters. User can change them with ethtool */
5165         adapter->hw.mac.autoneg = 1;
5166         adapter->fc_autoneg = 1;
5167         adapter->hw.fc.requested_mode = e1000_fc_default;
5168         adapter->hw.fc.current_mode = e1000_fc_default;
5169         adapter->hw.phy.autoneg_advertised = 0x2f;
5170
5171         /* ring size defaults */
5172         adapter->rx_ring->count = 256;
5173         adapter->tx_ring->count = 256;
5174
5175         /*
5176          * Initial Wake on LAN setting - If APM wake is enabled in
5177          * the EEPROM, enable the ACPI Magic Packet filter
5178          */
5179         if (adapter->flags & FLAG_APME_IN_WUC) {
5180                 /* APME bit in EEPROM is mapped to WUC.APME */
5181                 eeprom_data = er32(WUC);
5182                 eeprom_apme_mask = E1000_WUC_APME;
5183                 if (eeprom_data & E1000_WUC_PHY_WAKE)
5184                         adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
5185         } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
5186                 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
5187                     (adapter->hw.bus.func == 1))
5188                         e1000_read_nvm(&adapter->hw,
5189                                 NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
5190                 else
5191                         e1000_read_nvm(&adapter->hw,
5192                                 NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
5193         }
5194
5195         /* fetch WoL from EEPROM */
5196         if (eeprom_data & eeprom_apme_mask)
5197                 adapter->eeprom_wol |= E1000_WUFC_MAG;
5198
5199         /*
5200          * now that we have the eeprom settings, apply the special cases
5201          * where the eeprom may be wrong or the board simply won't support
5202          * wake on lan on a particular port
5203          */
5204         if (!(adapter->flags & FLAG_HAS_WOL))
5205                 adapter->eeprom_wol = 0;
5206
5207         /* initialize the wol settings based on the eeprom settings */
5208         adapter->wol = adapter->eeprom_wol;
5209         device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
5210
5211         /* save off EEPROM version number */
5212         e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
5213
5214         /* reset the hardware with the new settings */
5215         e1000e_reset(adapter);
5216
5217         /*
5218          * If the controller has AMT, do not set DRV_LOAD until the interface
5219          * is up.  For all other cases, let the f/w know that the h/w is now
5220          * under the control of the driver.
5221          */
5222         if (!(adapter->flags & FLAG_HAS_AMT))
5223                 e1000_get_hw_control(adapter);
5224
5225         strcpy(netdev->name, "eth%d");
5226         err = register_netdev(netdev);
5227         if (err)
5228                 goto err_register;
5229
5230         /* carrier off reporting is important to ethtool even BEFORE open */
5231         netif_carrier_off(netdev);
5232
5233         e1000_print_device_info(adapter);
5234
5235         return 0;
5236
5237 err_register:
5238         if (!(adapter->flags & FLAG_HAS_AMT))
5239                 e1000_release_hw_control(adapter);
5240 err_eeprom:
5241         if (!e1000_check_reset_block(&adapter->hw))
5242                 e1000_phy_hw_reset(&adapter->hw);
5243 err_hw_init:
5244
5245         kfree(adapter->tx_ring);
5246         kfree(adapter->rx_ring);
5247 err_sw_init:
5248         if (adapter->hw.flash_address)
5249                 iounmap(adapter->hw.flash_address);
5250         e1000e_reset_interrupt_capability(adapter);
5251 err_flashmap:
5252         iounmap(adapter->hw.hw_addr);
5253 err_ioremap:
5254         free_netdev(netdev);
5255 err_alloc_etherdev:
5256         pci_release_selected_regions(pdev,
5257                                      pci_select_bars(pdev, IORESOURCE_MEM));
5258 err_pci_reg:
5259 err_dma:
5260         pci_disable_device(pdev);
5261         return err;
5262 }
5263
5264 /**
5265  * e1000_remove - Device Removal Routine
5266  * @pdev: PCI device information struct
5267  *
5268  * e1000_remove is called by the PCI subsystem to alert the driver
5269  * that it should release a PCI device.  The could be caused by a
5270  * Hot-Plug event, or because the driver is going to be removed from
5271  * memory.
5272  **/
5273 static void __devexit e1000_remove(struct pci_dev *pdev)
5274 {
5275         struct net_device *netdev = pci_get_drvdata(pdev);
5276         struct e1000_adapter *adapter = netdev_priv(netdev);
5277
5278         /*
5279          * flush_scheduled work may reschedule our watchdog task, so
5280          * explicitly disable watchdog tasks from being rescheduled
5281          */
5282         set_bit(__E1000_DOWN, &adapter->state);
5283         del_timer_sync(&adapter->watchdog_timer);
5284         del_timer_sync(&adapter->phy_info_timer);
5285
5286         cancel_work_sync(&adapter->reset_task);
5287         cancel_work_sync(&adapter->watchdog_task);
5288         cancel_work_sync(&adapter->downshift_task);
5289         cancel_work_sync(&adapter->update_phy_task);
5290         cancel_work_sync(&adapter->print_hang_task);
5291         flush_scheduled_work();
5292
5293         if (!(netdev->flags & IFF_UP))
5294                 e1000_power_down_phy(adapter);
5295
5296         unregister_netdev(netdev);
5297
5298         /*
5299          * Release control of h/w to f/w.  If f/w is AMT enabled, this
5300          * would have already happened in close and is redundant.
5301          */
5302         e1000_release_hw_control(adapter);
5303
5304         e1000e_reset_interrupt_capability(adapter);
5305         kfree(adapter->tx_ring);
5306         kfree(adapter->rx_ring);
5307
5308         iounmap(adapter->hw.hw_addr);
5309         if (adapter->hw.flash_address)
5310                 iounmap(adapter->hw.flash_address);
5311         pci_release_selected_regions(pdev,
5312                                      pci_select_bars(pdev, IORESOURCE_MEM));
5313
5314         free_netdev(netdev);
5315
5316         /* AER disable */
5317         pci_disable_pcie_error_reporting(pdev);
5318
5319         pci_disable_device(pdev);
5320 }
5321
5322 /* PCI Error Recovery (ERS) */
5323 static struct pci_error_handlers e1000_err_handler = {
5324         .error_detected = e1000_io_error_detected,
5325         .slot_reset = e1000_io_slot_reset,
5326         .resume = e1000_io_resume,
5327 };
5328
5329 static struct pci_device_id e1000_pci_tbl[] = {
5330         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
5331         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
5332         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
5333         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
5334         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
5335         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
5336         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
5337         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
5338         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
5339
5340         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
5341         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
5342         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
5343         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
5344
5345         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
5346         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
5347         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
5348
5349         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
5350         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
5351         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
5352
5353         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
5354           board_80003es2lan },
5355         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
5356           board_80003es2lan },
5357         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
5358           board_80003es2lan },
5359         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
5360           board_80003es2lan },
5361
5362         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
5363         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
5364         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
5365         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
5366         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
5367         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
5368         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
5369         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
5370
5371         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
5372         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
5373         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
5374         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
5375         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
5376         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
5377         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
5378         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
5379         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
5380
5381         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
5382         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
5383         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
5384
5385         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
5386         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
5387
5388         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
5389         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
5390         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
5391         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
5392
5393         { }     /* terminate list */
5394 };
5395 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
5396
5397 /* PCI Device API Driver */
5398 static struct pci_driver e1000_driver = {
5399         .name     = e1000e_driver_name,
5400         .id_table = e1000_pci_tbl,
5401         .probe    = e1000_probe,
5402         .remove   = __devexit_p(e1000_remove),
5403 #ifdef CONFIG_PM
5404         /* Power Management Hooks */
5405         .suspend  = e1000_suspend,
5406         .resume   = e1000_resume,
5407 #endif
5408         .shutdown = e1000_shutdown,
5409         .err_handler = &e1000_err_handler
5410 };
5411
5412 /**
5413  * e1000_init_module - Driver Registration Routine
5414  *
5415  * e1000_init_module is the first routine called when the driver is
5416  * loaded. All it does is register with the PCI subsystem.
5417  **/
5418 static int __init e1000_init_module(void)
5419 {
5420         int ret;
5421         printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
5422                e1000e_driver_name, e1000e_driver_version);
5423         printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n",
5424                e1000e_driver_name);
5425         ret = pci_register_driver(&e1000_driver);
5426
5427         return ret;
5428 }
5429 module_init(e1000_init_module);
5430
5431 /**
5432  * e1000_exit_module - Driver Exit Cleanup Routine
5433  *
5434  * e1000_exit_module is called just before the driver is removed
5435  * from memory.
5436  **/
5437 static void __exit e1000_exit_module(void)
5438 {
5439         pci_unregister_driver(&e1000_driver);
5440 }
5441 module_exit(e1000_exit_module);
5442
5443
5444 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
5445 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
5446 MODULE_LICENSE("GPL");
5447 MODULE_VERSION(DRV_VERSION);
5448
5449 /* e1000_main.c */