Merge tag '4.16-rc-SMB3' of git://git.samba.org/sfrench/cifs-2.6
[sfrench/cifs-2.6.git] / drivers / mtd / nand / nand_micron.c
1 /*
2  * Copyright (C) 2017 Free Electrons
3  * Copyright (C) 2017 NextThing Co
4  *
5  * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  */
17
18 #include <linux/mtd/rawnand.h>
19
20 /*
21  * Special Micron status bit that indicates when the block has been
22  * corrected by on-die ECC and should be rewritten
23  */
24 #define NAND_STATUS_WRITE_RECOMMENDED   BIT(3)
25
26 struct nand_onfi_vendor_micron {
27         u8 two_plane_read;
28         u8 read_cache;
29         u8 read_unique_id;
30         u8 dq_imped;
31         u8 dq_imped_num_settings;
32         u8 dq_imped_feat_addr;
33         u8 rb_pulldown_strength;
34         u8 rb_pulldown_strength_feat_addr;
35         u8 rb_pulldown_strength_num_settings;
36         u8 otp_mode;
37         u8 otp_page_start;
38         u8 otp_data_prot_addr;
39         u8 otp_num_pages;
40         u8 otp_feat_addr;
41         u8 read_retry_options;
42         u8 reserved[72];
43         u8 param_revision;
44 } __packed;
45
46 static int micron_nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
47 {
48         struct nand_chip *chip = mtd_to_nand(mtd);
49         u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
50
51         return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
52                                        feature);
53 }
54
55 /*
56  * Configure chip properties from Micron vendor-specific ONFI table
57  */
58 static int micron_nand_onfi_init(struct nand_chip *chip)
59 {
60         struct nand_onfi_params *p = &chip->onfi_params;
61         struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
62
63         if (!chip->onfi_version)
64                 return 0;
65
66         if (le16_to_cpu(p->vendor_revision) < 1)
67                 return 0;
68
69         chip->read_retries = micron->read_retry_options;
70         chip->setup_read_retry = micron_nand_setup_read_retry;
71
72         return 0;
73 }
74
75 static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
76                                             struct mtd_oob_region *oobregion)
77 {
78         if (section >= 4)
79                 return -ERANGE;
80
81         oobregion->offset = (section * 16) + 8;
82         oobregion->length = 8;
83
84         return 0;
85 }
86
87 static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
88                                              struct mtd_oob_region *oobregion)
89 {
90         if (section >= 4)
91                 return -ERANGE;
92
93         oobregion->offset = (section * 16) + 2;
94         oobregion->length = 6;
95
96         return 0;
97 }
98
99 static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = {
100         .ecc = micron_nand_on_die_ooblayout_ecc,
101         .free = micron_nand_on_die_ooblayout_free,
102 };
103
104 static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
105 {
106         u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
107
108         if (enable)
109                 feature[0] |= ONFI_FEATURE_ON_DIE_ECC_EN;
110
111         return chip->onfi_set_features(nand_to_mtd(chip), chip,
112                                        ONFI_FEATURE_ON_DIE_ECC, feature);
113 }
114
115 static int
116 micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
117                                  uint8_t *buf, int oob_required,
118                                  int page)
119 {
120         u8 status;
121         int ret, max_bitflips = 0;
122
123         ret = micron_nand_on_die_ecc_setup(chip, true);
124         if (ret)
125                 return ret;
126
127         ret = nand_read_page_op(chip, page, 0, NULL, 0);
128         if (ret)
129                 goto out;
130
131         ret = nand_status_op(chip, &status);
132         if (ret)
133                 goto out;
134
135         ret = nand_exit_status_op(chip);
136         if (ret)
137                 goto out;
138
139         if (status & NAND_STATUS_FAIL)
140                 mtd->ecc_stats.failed++;
141
142         /*
143          * The internal ECC doesn't tell us the number of bitflips
144          * that have been corrected, but tells us if it recommends to
145          * rewrite the block. If it's the case, then we pretend we had
146          * a number of bitflips equal to the ECC strength, which will
147          * hint the NAND core to rewrite the block.
148          */
149         else if (status & NAND_STATUS_WRITE_RECOMMENDED)
150                 max_bitflips = chip->ecc.strength;
151
152         ret = nand_read_data_op(chip, buf, mtd->writesize, false);
153         if (!ret && oob_required)
154                 ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize,
155                                         false);
156
157 out:
158         micron_nand_on_die_ecc_setup(chip, false);
159
160         return ret ? ret : max_bitflips;
161 }
162
163 static int
164 micron_nand_write_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
165                                   const uint8_t *buf, int oob_required,
166                                   int page)
167 {
168         int ret;
169
170         ret = micron_nand_on_die_ecc_setup(chip, true);
171         if (ret)
172                 return ret;
173
174         ret = nand_write_page_raw(mtd, chip, buf, oob_required, page);
175         micron_nand_on_die_ecc_setup(chip, false);
176
177         return ret;
178 }
179
180 enum {
181         /* The NAND flash doesn't support on-die ECC */
182         MICRON_ON_DIE_UNSUPPORTED,
183
184         /*
185          * The NAND flash supports on-die ECC and it can be
186          * enabled/disabled by a set features command.
187          */
188         MICRON_ON_DIE_SUPPORTED,
189
190         /*
191          * The NAND flash supports on-die ECC, and it cannot be
192          * disabled.
193          */
194         MICRON_ON_DIE_MANDATORY,
195 };
196
197 /*
198  * Try to detect if the NAND support on-die ECC. To do this, we enable
199  * the feature, and read back if it has been enabled as expected. We
200  * also check if it can be disabled, because some Micron NANDs do not
201  * allow disabling the on-die ECC and we don't support such NANDs for
202  * now.
203  *
204  * This function also has the side effect of disabling on-die ECC if
205  * it had been left enabled by the firmware/bootloader.
206  */
207 static int micron_supports_on_die_ecc(struct nand_chip *chip)
208 {
209         u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
210         int ret;
211
212         if (chip->onfi_version == 0)
213                 return MICRON_ON_DIE_UNSUPPORTED;
214
215         if (chip->bits_per_cell != 1)
216                 return MICRON_ON_DIE_UNSUPPORTED;
217
218         ret = micron_nand_on_die_ecc_setup(chip, true);
219         if (ret)
220                 return MICRON_ON_DIE_UNSUPPORTED;
221
222         chip->onfi_get_features(nand_to_mtd(chip), chip,
223                                 ONFI_FEATURE_ON_DIE_ECC, feature);
224         if ((feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN) == 0)
225                 return MICRON_ON_DIE_UNSUPPORTED;
226
227         ret = micron_nand_on_die_ecc_setup(chip, false);
228         if (ret)
229                 return MICRON_ON_DIE_UNSUPPORTED;
230
231         chip->onfi_get_features(nand_to_mtd(chip), chip,
232                                 ONFI_FEATURE_ON_DIE_ECC, feature);
233         if (feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN)
234                 return MICRON_ON_DIE_MANDATORY;
235
236         /*
237          * Some Micron NANDs have an on-die ECC of 4/512, some other
238          * 8/512. We only support the former.
239          */
240         if (chip->onfi_params.ecc_bits != 4)
241                 return MICRON_ON_DIE_UNSUPPORTED;
242
243         return MICRON_ON_DIE_SUPPORTED;
244 }
245
246 static int micron_nand_init(struct nand_chip *chip)
247 {
248         struct mtd_info *mtd = nand_to_mtd(chip);
249         int ondie;
250         int ret;
251
252         ret = micron_nand_onfi_init(chip);
253         if (ret)
254                 return ret;
255
256         if (mtd->writesize == 2048)
257                 chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
258
259         ondie = micron_supports_on_die_ecc(chip);
260
261         if (ondie == MICRON_ON_DIE_MANDATORY) {
262                 pr_err("On-die ECC forcefully enabled, not supported\n");
263                 return -EINVAL;
264         }
265
266         if (chip->ecc.mode == NAND_ECC_ON_DIE) {
267                 if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
268                         pr_err("On-die ECC selected but not supported\n");
269                         return -EINVAL;
270                 }
271
272                 chip->ecc.bytes = 8;
273                 chip->ecc.size = 512;
274                 chip->ecc.strength = 4;
275                 chip->ecc.algo = NAND_ECC_BCH;
276                 chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
277                 chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
278                 chip->ecc.read_page_raw = nand_read_page_raw;
279                 chip->ecc.write_page_raw = nand_write_page_raw;
280
281                 mtd_set_ooblayout(mtd, &micron_nand_on_die_ooblayout_ops);
282         }
283
284         return 0;
285 }
286
287 const struct nand_manufacturer_ops micron_nand_manuf_ops = {
288         .init = micron_nand_init,
289 };