drivers/media/dvb-frontends/tda1004x.c

   1   /*
   2      Driver for Philips tda1004xh OFDM Demodulator
   3
   4      (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach
   5
   6      This program is free software; you can redistribute it and/or modify
   7      it under the terms of the GNU General Public License as published by
   8      the Free Software Foundation; either version 2 of the License, or
   9      (at your option) any later version.
  10
  11      This program is distributed in the hope that it will be useful,
  12      but WITHOUT ANY WARRANTY; without even the implied warranty of
  13      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14
  15      GNU General Public License for more details.
  16
  17      You should have received a copy of the GNU General Public License
  18      along with this program; if not, write to the Free Software
  19      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20
  21    */
  22 /*
  23  * This driver needs external firmware. Please use the commands
  24  * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
  25  * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
  26  * download/extract them, and then copy them to /usr/lib/hotplug/firmware
  27  * or /lib/firmware (depending on configuration of firmware hotplug).
  28  */
  29 #define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"
  30 #define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"
  31
  32 #include <linux/init.h>
  33 #include <linux/module.h>
  34 #include <linux/device.h>
  35 #include <linux/jiffies.h>
  36 #include <linux/string.h>
  37 #include <linux/slab.h>
  38
  39 #include "dvb_frontend.h"
  40 #include "tda1004x.h"
  41
  42 static int debug;
  43 #define dprintk(args...) \
  44         do { \
  45                 if (debug) printk(KERN_DEBUG "tda1004x: " args); \
  46         } while (0)
  47
  48 #define TDA1004X_CHIPID          0x00
  49 #define TDA1004X_AUTO            0x01
  50 #define TDA1004X_IN_CONF1        0x02
  51 #define TDA1004X_IN_CONF2        0x03
  52 #define TDA1004X_OUT_CONF1       0x04
  53 #define TDA1004X_OUT_CONF2       0x05
  54 #define TDA1004X_STATUS_CD       0x06
  55 #define TDA1004X_CONFC4          0x07
  56 #define TDA1004X_DSSPARE2        0x0C
  57 #define TDA10045H_CODE_IN        0x0D
  58 #define TDA10045H_FWPAGE         0x0E
  59 #define TDA1004X_SCAN_CPT        0x10
  60 #define TDA1004X_DSP_CMD         0x11
  61 #define TDA1004X_DSP_ARG         0x12
  62 #define TDA1004X_DSP_DATA1       0x13
  63 #define TDA1004X_DSP_DATA2       0x14
  64 #define TDA1004X_CONFADC1        0x15
  65 #define TDA1004X_CONFC1          0x16
  66 #define TDA10045H_S_AGC          0x1a
  67 #define TDA10046H_AGC_TUN_LEVEL  0x1a
  68 #define TDA1004X_SNR             0x1c
  69 #define TDA1004X_CONF_TS1        0x1e
  70 #define TDA1004X_CONF_TS2        0x1f
  71 #define TDA1004X_CBER_RESET      0x20
  72 #define TDA1004X_CBER_MSB        0x21
  73 #define TDA1004X_CBER_LSB        0x22
  74 #define TDA1004X_CVBER_LUT       0x23
  75 #define TDA1004X_VBER_MSB        0x24
  76 #define TDA1004X_VBER_MID        0x25
  77 #define TDA1004X_VBER_LSB        0x26
  78 #define TDA1004X_UNCOR           0x27
  79
  80 #define TDA10045H_CONFPLL_P      0x2D
  81 #define TDA10045H_CONFPLL_M_MSB  0x2E
  82 #define TDA10045H_CONFPLL_M_LSB  0x2F
  83 #define TDA10045H_CONFPLL_N      0x30
  84
  85 #define TDA10046H_CONFPLL1       0x2D
  86 #define TDA10046H_CONFPLL2       0x2F
  87 #define TDA10046H_CONFPLL3       0x30
  88 #define TDA10046H_TIME_WREF1     0x31
  89 #define TDA10046H_TIME_WREF2     0x32
  90 #define TDA10046H_TIME_WREF3     0x33
  91 #define TDA10046H_TIME_WREF4     0x34
  92 #define TDA10046H_TIME_WREF5     0x35
  93
  94 #define TDA10045H_UNSURW_MSB     0x31
  95 #define TDA10045H_UNSURW_LSB     0x32
  96 #define TDA10045H_WREF_MSB       0x33
  97 #define TDA10045H_WREF_MID       0x34
  98 #define TDA10045H_WREF_LSB       0x35
  99 #define TDA10045H_MUXOUT         0x36
 100 #define TDA1004X_CONFADC2        0x37
 101
 102 #define TDA10045H_IOFFSET        0x38
 103
 104 #define TDA10046H_CONF_TRISTATE1 0x3B
 105 #define TDA10046H_CONF_TRISTATE2 0x3C
 106 #define TDA10046H_CONF_POLARITY  0x3D
 107 #define TDA10046H_FREQ_OFFSET    0x3E
 108 #define TDA10046H_GPIO_OUT_SEL   0x41
 109 #define TDA10046H_GPIO_SELECT    0x42
 110 #define TDA10046H_AGC_CONF       0x43
 111 #define TDA10046H_AGC_THR        0x44
 112 #define TDA10046H_AGC_RENORM     0x45
 113 #define TDA10046H_AGC_GAINS      0x46
 114 #define TDA10046H_AGC_TUN_MIN    0x47
 115 #define TDA10046H_AGC_TUN_MAX    0x48
 116 #define TDA10046H_AGC_IF_MIN     0x49
 117 #define TDA10046H_AGC_IF_MAX     0x4A
 118
 119 #define TDA10046H_FREQ_PHY2_MSB  0x4D
 120 #define TDA10046H_FREQ_PHY2_LSB  0x4E
 121
 122 #define TDA10046H_CVBER_CTRL     0x4F
 123 #define TDA10046H_AGC_IF_LEVEL   0x52
 124 #define TDA10046H_CODE_CPT       0x57
 125 #define TDA10046H_CODE_IN        0x58
 126
 127
 128 static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data)
 129 {
 130         int ret;
 131         u8 buf[] = { reg, data };
 132         struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
 133
 134         dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data);
 135
 136         msg.addr = state->config->demod_address;
 137         ret = i2c_transfer(state->i2c, &msg, 1);
 138
 139         if (ret != 1)
 140                 dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 141                         __func__, reg, data, ret);
 142
 143         dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
 144                 reg, data, ret);
 145         return (ret != 1) ? -1 : 0;
 146 }
 147
 148 static int tda1004x_read_byte(struct tda1004x_state *state, int reg)
 149 {
 150         int ret;
 151         u8 b0[] = { reg };
 152         u8 b1[] = { 0 };
 153         struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
 154                                 { .flags = I2C_M_RD, .buf = b1, .len = 1 }};
 155
 156         dprintk("%s: reg=0x%x\n", __func__, reg);
 157
 158         msg[0].addr = state->config->demod_address;
 159         msg[1].addr = state->config->demod_address;
 160         ret = i2c_transfer(state->i2c, msg, 2);
 161
 162         if (ret != 2) {
 163                 dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg,
 164                         ret);
 165                 return -EINVAL;
 166         }
 167
 168         dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
 169                 reg, b1[0], ret);
 170         return b1[0];
 171 }
 172
 173 static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data)
 174 {
 175         int val;
 176         dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg,
 177                 mask, data);
 178
 179         // read a byte and check
 180         val = tda1004x_read_byte(state, reg);
 181         if (val < 0)
 182                 return val;
 183
 184         // mask if off
 185         val = val & ~mask;
 186         val |= data & 0xff;
 187
 188         // write it out again
 189         return tda1004x_write_byteI(state, reg, val);
 190 }
 191
 192 static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len)
 193 {
 194         int i;
 195         int result;
 196
 197         dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len);
 198
 199         result = 0;
 200         for (i = 0; i < len; i++) {
 201                 result = tda1004x_write_byteI(state, reg + i, buf[i]);
 202                 if (result != 0)
 203                         break;
 204         }
 205
 206         return result;
 207 }
 208
 209 static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
 210 {
 211         int result;
 212         dprintk("%s\n", __func__);
 213
 214         result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
 215         msleep(20);
 216         return result;
 217 }
 218
 219 static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state)
 220 {
 221         dprintk("%s\n", __func__);
 222
 223         return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0);
 224 }
 225
 226 static int tda10045h_set_bandwidth(struct tda1004x_state *state,
 227                                    u32 bandwidth)
 228 {
 229         static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f };
 230         static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb };
 231         static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 };
 232
 233         switch (bandwidth) {
 234         case 6000000:
 235                 tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
 236                 break;
 237
 238         case 7000000:
 239                 tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
 240                 break;
 241
 242         case 8000000:
 243                 tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
 244                 break;
 245
 246         default:
 247                 return -EINVAL;
 248         }
 249
 250         tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0);
 251
 252         return 0;
 253 }
 254
 255 static int tda10046h_set_bandwidth(struct tda1004x_state *state,
 256                                    u32 bandwidth)
 257 {
 258         static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
 259         static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
 260         static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
 261
 262         static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
 263         static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
 264         static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
 265         int tda10046_clk53m;
 266
 267         if ((state->config->if_freq == TDA10046_FREQ_045) ||
 268             (state->config->if_freq == TDA10046_FREQ_052))
 269                 tda10046_clk53m = 0;
 270         else
 271                 tda10046_clk53m = 1;
 272         switch (bandwidth) {
 273         case 6000000:
 274                 if (tda10046_clk53m)
 275                         tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
 276                                                   sizeof(bandwidth_6mhz_53M));
 277                 else
 278                         tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
 279                                                   sizeof(bandwidth_6mhz_48M));
 280                 if (state->config->if_freq == TDA10046_FREQ_045) {
 281                         tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
 282                         tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
 283                 }
 284                 break;
 285
 286         case 7000000:
 287                 if (tda10046_clk53m)
 288                         tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
 289                                                   sizeof(bandwidth_7mhz_53M));
 290                 else
 291                         tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
 292                                                   sizeof(bandwidth_7mhz_48M));
 293                 if (state->config->if_freq == TDA10046_FREQ_045) {
 294                         tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
 295                         tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
 296                 }
 297                 break;
 298
 299         case 8000000:
 300                 if (tda10046_clk53m)
 301                         tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
 302                                                   sizeof(bandwidth_8mhz_53M));
 303                 else
 304                         tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
 305                                                   sizeof(bandwidth_8mhz_48M));
 306                 if (state->config->if_freq == TDA10046_FREQ_045) {
 307                         tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
 308                         tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
 309                 }
 310                 break;
 311
 312         default:
 313                 return -EINVAL;
 314         }
 315
 316         return 0;
 317 }
 318
 319 static int tda1004x_do_upload(struct tda1004x_state *state,
 320                               const unsigned char *mem, unsigned int len,
 321                               u8 dspCodeCounterReg, u8 dspCodeInReg)
 322 {
 323         u8 buf[65];
 324         struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
 325         int tx_size;
 326         int pos = 0;
 327
 328         /* clear code counter */
 329         tda1004x_write_byteI(state, dspCodeCounterReg, 0);
 330         fw_msg.addr = state->config->demod_address;
 331
 332         i2c_lock_adapter(state->i2c);
 333         buf[0] = dspCodeInReg;
 334         while (pos != len) {
 335                 // work out how much to send this time
 336                 tx_size = len - pos;
 337                 if (tx_size > 0x10)
 338                         tx_size = 0x10;
 339
 340                 // send the chunk
 341                 memcpy(buf + 1, mem + pos, tx_size);
 342                 fw_msg.len = tx_size + 1;
 343                 if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
 344                         printk(KERN_ERR "tda1004x: Error during firmware upload\n");
 345                         i2c_unlock_adapter(state->i2c);
 346                         return -EIO;
 347                 }
 348                 pos += tx_size;
 349
 350                 dprintk("%s: fw_pos=0x%x\n", __func__, pos);
 351         }
 352         i2c_unlock_adapter(state->i2c);
 353
 354         /* give the DSP a chance to settle 03/10/05 Hac */
 355         msleep(100);
 356
 357         return 0;
 358 }
 359
 360 static int tda1004x_check_upload_ok(struct tda1004x_state *state)
 361 {
 362         u8 data1, data2;
 363         unsigned long timeout;
 364
 365         if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
 366                 timeout = jiffies + 2 * HZ;
 367                 while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
 368                         if (time_after(jiffies, timeout)) {
 369                                 printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
 370                                 break;
 371                         }
 372                         msleep(1);
 373                 }
 374         } else
 375                 msleep(100);
 376
 377         // check upload was OK
 378         tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
 379         tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67);
 380
 381         data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
 382         data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
 383         if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {
 384                 printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
 385                 return -EIO;
 386         }
 387         printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
 388         return 0;
 389 }
 390
 391 static int tda10045_fwupload(struct dvb_frontend* fe)
 392 {
 393         struct tda1004x_state* state = fe->demodulator_priv;
 394         int ret;
 395         const struct firmware *fw;
 396
 397         /* don't re-upload unless necessary */
 398         if (tda1004x_check_upload_ok(state) == 0)
 399                 return 0;
 400
 401         /* request the firmware, this will block until someone uploads it */
 402         printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
 403         ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
 404         if (ret) {
 405                 printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
 406                 return ret;
 407         }
 408
 409         /* reset chip */
 410         tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0);
 411         tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
 412         tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
 413         msleep(10);
 414
 415         /* set parameters */
 416         tda10045h_set_bandwidth(state, 8000000);
 417
 418         ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);
 419         release_firmware(fw);
 420         if (ret)
 421                 return ret;
 422         printk(KERN_INFO "tda1004x: firmware upload complete\n");
 423
 424         /* wait for DSP to initialise */
 425         /* DSPREADY doesn't seem to work on the TDA10045H */
 426         msleep(100);
 427
 428         return tda1004x_check_upload_ok(state);
 429 }
 430
 431 static void tda10046_init_plls(struct dvb_frontend* fe)
 432 {
 433         struct tda1004x_state* state = fe->demodulator_priv;
 434         int tda10046_clk53m;
 435
 436         if ((state->config->if_freq == TDA10046_FREQ_045) ||
 437             (state->config->if_freq == TDA10046_FREQ_052))
 438                 tda10046_clk53m = 0;
 439         else
 440                 tda10046_clk53m = 1;
 441
 442         tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
 443         if(tda10046_clk53m) {
 444                 printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
 445                 tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
 446         } else {
 447                 printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
 448                 tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
 449         }
 450         if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
 451                 dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__);
 452                 tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
 453         } else {
 454                 dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__);
 455                 tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
 456         }
 457         if(tda10046_clk53m)
 458                 tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
 459         else
 460                 tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
 461         /* Note clock frequency is handled implicitly */
 462         switch (state->config->if_freq) {
 463         case TDA10046_FREQ_045:
 464                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
 465                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
 466                 break;
 467         case TDA10046_FREQ_052:
 468                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
 469                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
 470                 break;
 471         case TDA10046_FREQ_3617:
 472                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
 473                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
 474                 break;
 475         case TDA10046_FREQ_3613:
 476                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
 477                 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
 478                 break;
 479         }
 480         tda10046h_set_bandwidth(state, 8000000); /* default bandwidth 8 MHz */
 481         /* let the PLLs settle */
 482         msleep(120);
 483 }
 484
 485 static int tda10046_fwupload(struct dvb_frontend* fe)
 486 {
 487         struct tda1004x_state* state = fe->demodulator_priv;
 488         int ret, confc4;
 489         const struct firmware *fw;
 490
 491         /* reset + wake up chip */
 492         if (state->config->xtal_freq == TDA10046_XTAL_4M) {
 493                 confc4 = 0;
 494         } else {
 495                 dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__);
 496                 confc4 = 0x80;
 497         }
 498         tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
 499
 500         tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
 501         /* set GPIO 1 and 3 */
 502         if (state->config->gpio_config != TDA10046_GPTRI) {
 503                 tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);
 504                 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);
 505         }
 506         /* let the clocks recover from sleep */
 507         msleep(10);
 508
 509         /* The PLLs need to be reprogrammed after sleep */
 510         tda10046_init_plls(fe);
 511         tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0);
 512
 513         /* don't re-upload unless necessary */
 514         if (tda1004x_check_upload_ok(state) == 0)
 515                 return 0;
 516
 517         /*
 518            For i2c normal work, we need to slow down the bus speed.
 519            However, the slow down breaks the eeprom firmware load.
 520            So, use normal speed for eeprom booting and then restore the
 521            i2c speed after that. Tested with MSI TV @nyware A/D board,
 522            that comes with firmware version 29 inside their eeprom.
 523
 524            It should also be noticed that no other I2C transfer should
 525            be in course while booting from eeprom, otherwise, tda10046
 526            goes into an instable state. So, proper locking are needed
 527            at the i2c bus master.
 528          */
 529         printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
 530         tda1004x_write_byteI(state, TDA1004X_CONFC4, 4);
 531         msleep(300);
 532         tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
 533
 534         /* Checks if eeprom firmware went without troubles */
 535         if (tda1004x_check_upload_ok(state) == 0)
 536                 return 0;
 537
 538         /* eeprom firmware didn't work. Load one manually. */
 539
 540         if (state->config->request_firmware != NULL) {
 541                 /* request the firmware, this will block until someone uploads it */
 542                 printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
 543                 ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
 544                 if (ret) {
 545                         /* remain compatible to old bug: try to load with tda10045 image name */
 546                         ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
 547                         if (ret) {
 548                                 printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
 549                                 return ret;
 550                         } else {
 551                                 printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
 552                                                   TDA10046_DEFAULT_FIRMWARE);
 553                         }
 554                 }
 555         } else {
 556                 printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");
 557                 return -EIO;
 558         }
 559         tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
 560         ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
 561         release_firmware(fw);
 562         return tda1004x_check_upload_ok(state);
 563 }
 564
 565 static int tda1004x_encode_fec(int fec)
 566 {
 567         // convert known FEC values
 568         switch (fec) {
 569         case FEC_1_2:
 570                 return 0;
 571         case FEC_2_3:
 572                 return 1;
 573         case FEC_3_4:
 574                 return 2;
 575         case FEC_5_6:
 576                 return 3;
 577         case FEC_7_8:
 578                 return 4;
 579         }
 580
 581         // unsupported
 582         return -EINVAL;
 583 }
 584
 585 static int tda1004x_decode_fec(int tdafec)
 586 {
 587         // convert known FEC values
 588         switch (tdafec) {
 589         case 0:
 590                 return FEC_1_2;
 591         case 1:
 592                 return FEC_2_3;
 593         case 2:
 594                 return FEC_3_4;
 595         case 3:
 596                 return FEC_5_6;
 597         case 4:
 598                 return FEC_7_8;
 599         }
 600
 601         // unsupported
 602         return -1;
 603 }
 604
 605 static int tda1004x_write(struct dvb_frontend* fe, const u8 buf[], int len)
 606 {
 607         struct tda1004x_state* state = fe->demodulator_priv;
 608
 609         if (len != 2)
 610                 return -EINVAL;
 611
 612         return tda1004x_write_byteI(state, buf[0], buf[1]);
 613 }
 614
 615 static int tda10045_init(struct dvb_frontend* fe)
 616 {
 617         struct tda1004x_state* state = fe->demodulator_priv;
 618
 619         dprintk("%s\n", __func__);
 620
 621         if (tda10045_fwupload(fe)) {
 622                 printk("tda1004x: firmware upload failed\n");
 623                 return -EIO;
 624         }
 625
 626         tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC
 627
 628         // tda setup
 629         tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
 630         tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
 631         tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal
 632         tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer
 633         tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset
 634         tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset
 635         tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface
 636         tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface
 637         tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits
 638         tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity
 639         tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e);
 640
 641         tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);
 642
 643         return 0;
 644 }
 645
 646 static int tda10046_init(struct dvb_frontend* fe)
 647 {
 648         struct tda1004x_state* state = fe->demodulator_priv;
 649         dprintk("%s\n", __func__);
 650
 651         if (tda10046_fwupload(fe)) {
 652                 printk("tda1004x: firmware upload failed\n");
 653                 return -EIO;
 654         }
 655
 656         // tda setup
 657         tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
 658         tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87);    // 100 ppm crystal, select HP stream
 659         tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88);      // enable pulse killer
 660
 661         switch (state->config->agc_config) {
 662         case TDA10046_AGC_DEFAULT:
 663                 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
 664                 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
 665                 break;
 666         case TDA10046_AGC_IFO_AUTO_NEG:
 667                 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
 668                 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
 669                 break;
 670         case TDA10046_AGC_IFO_AUTO_POS:
 671                 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
 672                 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00);  // set AGC polarities
 673                 break;
 674         case TDA10046_AGC_TDA827X:
 675                 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
 676                 tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
 677                 tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 678                 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
 679                 break;
 680         }
 681         if (state->config->ts_mode == 0) {
 682                 tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40);
 683                 tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
 684         } else {
 685                 tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80);
 686                 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10,
 687                                                         state->config->invert_oclk << 4);
 688         }
 689         tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
 690         tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on
 691         tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0);    // }
 692         tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
 693         tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0);     // }
 694         tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff);  // }
 695         tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
 696         tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
 697         tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
 698         tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
 699         // tda1004x_write_mask(state, 0x50, 0x80, 0x80);         // handle out of guard echoes
 700
 701         return 0;
 702 }
 703
 704 static int tda1004x_set_fe(struct dvb_frontend *fe)
 705 {
 706         struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
 707         struct tda1004x_state* state = fe->demodulator_priv;
 708         int tmp;
 709         int inversion;
 710
 711         dprintk("%s\n", __func__);
 712
 713         if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
 714                 // setup auto offset
 715                 tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10);
 716                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0);
 717                 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0);
 718
 719                 // disable agc_conf[2]
 720                 tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0);
 721         }
 722
 723         // set frequency
 724         if (fe->ops.tuner_ops.set_params) {
 725                 fe->ops.tuner_ops.set_params(fe);
 726                 if (fe->ops.i2c_gate_ctrl)
 727                         fe->ops.i2c_gate_ctrl(fe, 0);
 728         }
 729
 730         // Hardcoded to use auto as much as possible on the TDA10045 as it
 731         // is very unreliable if AUTO mode is _not_ used.
 732         if (state->demod_type == TDA1004X_DEMOD_TDA10045) {
 733                 fe_params->code_rate_HP = FEC_AUTO;
 734                 fe_params->guard_interval = GUARD_INTERVAL_AUTO;
 735                 fe_params->transmission_mode = TRANSMISSION_MODE_AUTO;
 736         }
 737
 738         // Set standard params.. or put them to auto
 739         if ((fe_params->code_rate_HP == FEC_AUTO) ||
 740                 (fe_params->code_rate_LP == FEC_AUTO) ||
 741                 (fe_params->modulation == QAM_AUTO) ||
 742                 (fe_params->hierarchy == HIERARCHY_AUTO)) {
 743                 tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1);        // enable auto
 744                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); /* turn off modulation bits */
 745                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits
 746                 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0); // turn off FEC bits
 747         } else {
 748                 tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0);        // disable auto
 749
 750                 // set HP FEC
 751                 tmp = tda1004x_encode_fec(fe_params->code_rate_HP);
 752                 if (tmp < 0)
 753                         return tmp;
 754                 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
 755
 756                 // set LP FEC
 757                 tmp = tda1004x_encode_fec(fe_params->code_rate_LP);
 758                 if (tmp < 0)
 759                         return tmp;
 760                 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
 761
 762                 /* set modulation */
 763                 switch (fe_params->modulation) {
 764                 case QPSK:
 765                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0);
 766                         break;
 767
 768                 case QAM_16:
 769                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1);
 770                         break;
 771
 772                 case QAM_64:
 773                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2);
 774                         break;
 775
 776                 default:
 777                         return -EINVAL;
 778                 }
 779
 780                 // set hierarchy
 781                 switch (fe_params->hierarchy) {
 782                 case HIERARCHY_NONE:
 783                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5);
 784                         break;
 785
 786                 case HIERARCHY_1:
 787                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5);
 788                         break;
 789
 790                 case HIERARCHY_2:
 791                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5);
 792                         break;
 793
 794                 case HIERARCHY_4:
 795                         tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5);
 796                         break;
 797
 798                 default:
 799                         return -EINVAL;
 800                 }
 801         }
 802
 803         // set bandwidth
 804         switch (state->demod_type) {
 805         case TDA1004X_DEMOD_TDA10045:
 806                 tda10045h_set_bandwidth(state, fe_params->bandwidth_hz);
 807                 break;
 808
 809         case TDA1004X_DEMOD_TDA10046:
 810                 tda10046h_set_bandwidth(state, fe_params->bandwidth_hz);
 811                 break;
 812         }
 813
 814         // set inversion
 815         inversion = fe_params->inversion;
 816         if (state->config->invert)
 817                 inversion = inversion ? INVERSION_OFF : INVERSION_ON;
 818         switch (inversion) {
 819         case INVERSION_OFF:
 820                 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
 821                 break;
 822
 823         case INVERSION_ON:
 824                 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20);
 825                 break;
 826
 827         default:
 828                 return -EINVAL;
 829         }
 830
 831         // set guard interval
 832         switch (fe_params->guard_interval) {
 833         case GUARD_INTERVAL_1_32:
 834                 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 835                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
 836                 break;
 837
 838         case GUARD_INTERVAL_1_16:
 839                 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 840                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2);
 841                 break;
 842
 843         case GUARD_INTERVAL_1_8:
 844                 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 845                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2);
 846                 break;
 847
 848         case GUARD_INTERVAL_1_4:
 849                 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 850                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2);
 851                 break;
 852
 853         case GUARD_INTERVAL_AUTO:
 854                 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2);
 855                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
 856                 break;
 857
 858         default:
 859                 return -EINVAL;
 860         }
 861
 862         // set transmission mode
 863         switch (fe_params->transmission_mode) {
 864         case TRANSMISSION_MODE_2K:
 865                 tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
 866                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4);
 867                 break;
 868
 869         case TRANSMISSION_MODE_8K:
 870                 tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
 871                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4);
 872                 break;
 873
 874         case TRANSMISSION_MODE_AUTO:
 875                 tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4);
 876                 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0);
 877                 break;
 878
 879         default:
 880                 return -EINVAL;
 881         }
 882
 883         // start the lock
 884         switch (state->demod_type) {
 885         case TDA1004X_DEMOD_TDA10045:
 886                 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
 887                 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
 888                 break;
 889
 890         case TDA1004X_DEMOD_TDA10046:
 891                 tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
 892                 msleep(1);
 893                 tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
 894                 break;
 895         }
 896
 897         msleep(10);
 898
 899         return 0;
 900 }
 901
 902 static int tda1004x_get_fe(struct dvb_frontend *fe)
 903 {
 904         struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
 905         struct tda1004x_state* state = fe->demodulator_priv;
 906
 907         dprintk("%s\n", __func__);
 908
 909         // inversion status
 910         fe_params->inversion = INVERSION_OFF;
 911         if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
 912                 fe_params->inversion = INVERSION_ON;
 913         if (state->config->invert)
 914                 fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
 915
 916         // bandwidth
 917         switch (state->demod_type) {
 918         case TDA1004X_DEMOD_TDA10045:
 919                 switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
 920                 case 0x14:
 921                         fe_params->bandwidth_hz = 8000000;
 922                         break;
 923                 case 0xdb:
 924                         fe_params->bandwidth_hz = 7000000;
 925                         break;
 926                 case 0x4f:
 927                         fe_params->bandwidth_hz = 6000000;
 928                         break;
 929                 }
 930                 break;
 931         case TDA1004X_DEMOD_TDA10046:
 932                 switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
 933                 case 0x5c:
 934                 case 0x54:
 935                         fe_params->bandwidth_hz = 8000000;
 936                         break;
 937                 case 0x6a:
 938                 case 0x60:
 939                         fe_params->bandwidth_hz = 7000000;
 940                         break;
 941                 case 0x7b:
 942                 case 0x70:
 943                         fe_params->bandwidth_hz = 6000000;
 944                         break;
 945                 }
 946                 break;
 947         }
 948
 949         // FEC
 950         fe_params->code_rate_HP =
 951             tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7);
 952         fe_params->code_rate_LP =
 953             tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7);
 954
 955         /* modulation */
 956         switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) {
 957         case 0:
 958                 fe_params->modulation = QPSK;
 959                 break;
 960         case 1:
 961                 fe_params->modulation = QAM_16;
 962                 break;
 963         case 2:
 964                 fe_params->modulation = QAM_64;
 965                 break;
 966         }
 967
 968         // transmission mode
 969         fe_params->transmission_mode = TRANSMISSION_MODE_2K;
 970         if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
 971                 fe_params->transmission_mode = TRANSMISSION_MODE_8K;
 972
 973         // guard interval
 974         switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
 975         case 0:
 976                 fe_params->guard_interval = GUARD_INTERVAL_1_32;
 977                 break;
 978         case 1:
 979                 fe_params->guard_interval = GUARD_INTERVAL_1_16;
 980                 break;
 981         case 2:
 982                 fe_params->guard_interval = GUARD_INTERVAL_1_8;
 983                 break;
 984         case 3:
 985                 fe_params->guard_interval = GUARD_INTERVAL_1_4;
 986                 break;
 987         }
 988
 989         // hierarchy
 990         switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) {
 991         case 0:
 992                 fe_params->hierarchy = HIERARCHY_NONE;
 993                 break;
 994         case 1:
 995                 fe_params->hierarchy = HIERARCHY_1;
 996                 break;
 997         case 2:
 998                 fe_params->hierarchy = HIERARCHY_2;
 999                 break;
1000         case 3:
1001                 fe_params->hierarchy = HIERARCHY_4;
1002                 break;
1003         }
1004
1005         return 0;
1006 }
1007
1008 static int tda1004x_read_status(struct dvb_frontend *fe,
1009                                 enum fe_status *fe_status)
1010 {
1011         struct tda1004x_state* state = fe->demodulator_priv;
1012         int status;
1013         int cber;
1014         int vber;
1015
1016         dprintk("%s\n", __func__);
1017
1018         // read status
1019         status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
1020         if (status == -1)
1021                 return -EIO;
1022
1023         // decode
1024         *fe_status = 0;
1025         if (status & 4)
1026                 *fe_status |= FE_HAS_SIGNAL;
1027         if (status & 2)
1028                 *fe_status |= FE_HAS_CARRIER;
1029         if (status & 8)
1030                 *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
1031
1032         // if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
1033         // is getting anything valid
1034         if (!(*fe_status & FE_HAS_VITERBI)) {
1035                 // read the CBER
1036                 cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
1037                 if (cber == -1)
1038                         return -EIO;
1039                 status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
1040                 if (status == -1)
1041                         return -EIO;
1042                 cber |= (status << 8);
1043                 // The address 0x20 should be read to cope with a TDA10046 bug
1044                 tda1004x_read_byte(state, TDA1004X_CBER_RESET);
1045
1046                 if (cber != 65535)
1047                         *fe_status |= FE_HAS_VITERBI;
1048         }
1049
1050         // if we DO have some valid VITERBI output, but don't already have SYNC
1051         // bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid.
1052         if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
1053                 // read the VBER
1054                 vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
1055                 if (vber == -1)
1056                         return -EIO;
1057                 status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
1058                 if (status == -1)
1059                         return -EIO;
1060                 vber |= (status << 8);
1061                 status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
1062                 if (status == -1)
1063                         return -EIO;
1064                 vber |= (status & 0x0f) << 16;
1065                 // The CVBER_LUT should be read to cope with TDA10046 hardware bug
1066                 tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
1067
1068                 // if RS has passed some valid TS packets, then we must be
1069                 // getting some SYNC bytes
1070                 if (vber < 16632)
1071                         *fe_status |= FE_HAS_SYNC;
1072         }
1073
1074         // success
1075         dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
1076         return 0;
1077 }
1078
1079 static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
1080 {
1081         struct tda1004x_state* state = fe->demodulator_priv;
1082         int tmp;
1083         int reg = 0;
1084
1085         dprintk("%s\n", __func__);
1086
1087         // determine the register to use
1088         switch (state->demod_type) {
1089         case TDA1004X_DEMOD_TDA10045:
1090                 reg = TDA10045H_S_AGC;
1091                 break;
1092
1093         case TDA1004X_DEMOD_TDA10046:
1094                 reg = TDA10046H_AGC_IF_LEVEL;
1095                 break;
1096         }
1097
1098         // read it
1099         tmp = tda1004x_read_byte(state, reg);
1100         if (tmp < 0)
1101                 return -EIO;
1102
1103         *signal = (tmp << 8) | tmp;
1104         dprintk("%s: signal=0x%x\n", __func__, *signal);
1105         return 0;
1106 }
1107
1108 static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr)
1109 {
1110         struct tda1004x_state* state = fe->demodulator_priv;
1111         int tmp;
1112
1113         dprintk("%s\n", __func__);
1114
1115         // read it
1116         tmp = tda1004x_read_byte(state, TDA1004X_SNR);
1117         if (tmp < 0)
1118                 return -EIO;
1119         tmp = 255 - tmp;
1120
1121         *snr = ((tmp << 8) | tmp);
1122         dprintk("%s: snr=0x%x\n", __func__, *snr);
1123         return 0;
1124 }
1125
1126 static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
1127 {
1128         struct tda1004x_state* state = fe->demodulator_priv;
1129         int tmp;
1130         int tmp2;
1131         int counter;
1132
1133         dprintk("%s\n", __func__);
1134
1135         // read the UCBLOCKS and reset
1136         counter = 0;
1137         tmp = tda1004x_read_byte(state, TDA1004X_UNCOR);
1138         if (tmp < 0)
1139                 return -EIO;
1140         tmp &= 0x7f;
1141         while (counter++ < 5) {
1142                 tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
1143                 tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
1144                 tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
1145
1146                 tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR);
1147                 if (tmp2 < 0)
1148                         return -EIO;
1149                 tmp2 &= 0x7f;
1150                 if ((tmp2 < tmp) || (tmp2 == 0))
1151                         break;
1152         }
1153
1154         if (tmp != 0x7f)
1155                 *ucblocks = tmp;
1156         else
1157                 *ucblocks = 0xffffffff;
1158
1159         dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks);
1160         return 0;
1161 }
1162
1163 static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
1164 {
1165         struct tda1004x_state* state = fe->demodulator_priv;
1166         int tmp;
1167
1168         dprintk("%s\n", __func__);
1169
1170         // read it in
1171         tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
1172         if (tmp < 0)
1173                 return -EIO;
1174         *ber = tmp << 1;
1175         tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
1176         if (tmp < 0)
1177                 return -EIO;
1178         *ber |= (tmp << 9);
1179         // The address 0x20 should be read to cope with a TDA10046 bug
1180         tda1004x_read_byte(state, TDA1004X_CBER_RESET);
1181
1182         dprintk("%s: ber=0x%x\n", __func__, *ber);
1183         return 0;
1184 }
1185
1186 static int tda1004x_sleep(struct dvb_frontend* fe)
1187 {
1188         struct tda1004x_state* state = fe->demodulator_priv;
1189         int gpio_conf;
1190
1191         switch (state->demod_type) {
1192         case TDA1004X_DEMOD_TDA10045:
1193                 tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
1194                 break;
1195
1196         case TDA1004X_DEMOD_TDA10046:
1197                 /* set outputs to tristate */
1198                 tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
1199                 /* invert GPIO 1 and 3 if desired*/
1200                 gpio_conf = state->config->gpio_config;
1201                 if (gpio_conf >= TDA10046_GP00_I)
1202                         tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,
1203                                                         (gpio_conf & 0x0f) ^ 0x0a);
1204
1205                 tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0);
1206                 tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
1207                 break;
1208         }
1209
1210         return 0;
1211 }
1212
1213 static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
1214 {
1215         struct tda1004x_state* state = fe->demodulator_priv;
1216
1217         if (enable) {
1218                 return tda1004x_enable_tuner_i2c(state);
1219         } else {
1220                 return tda1004x_disable_tuner_i2c(state);
1221         }
1222 }
1223
1224 static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
1225 {
1226         fesettings->min_delay_ms = 800;
1227         /* Drift compensation makes no sense for DVB-T */
1228         fesettings->step_size = 0;
1229         fesettings->max_drift = 0;
1230         return 0;
1231 }
1232
1233 static void tda1004x_release(struct dvb_frontend* fe)
1234 {
1235         struct tda1004x_state *state = fe->demodulator_priv;
1236         kfree(state);
1237 }
1238
1239 static struct dvb_frontend_ops tda10045_ops = {
1240         .delsys = { SYS_DVBT },
1241         .info = {
1242                 .name = "Philips TDA10045H DVB-T",
1243                 .frequency_min = 51000000,
1244                 .frequency_max = 858000000,
1245                 .frequency_stepsize = 166667,
1246                 .caps =
1247                     FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
1248                     FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
1249                     FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
1250                     FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
1251         },
1252
1253         .release = tda1004x_release,
1254
1255         .init = tda10045_init,
1256         .sleep = tda1004x_sleep,
1257         .write = tda1004x_write,
1258         .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
1259
1260         .set_frontend = tda1004x_set_fe,
1261         .get_frontend = tda1004x_get_fe,
1262         .get_tune_settings = tda1004x_get_tune_settings,
1263
1264         .read_status = tda1004x_read_status,
1265         .read_ber = tda1004x_read_ber,
1266         .read_signal_strength = tda1004x_read_signal_strength,
1267         .read_snr = tda1004x_read_snr,
1268         .read_ucblocks = tda1004x_read_ucblocks,
1269 };
1270
1271 struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
1272                                      struct i2c_adapter* i2c)
1273 {
1274         struct tda1004x_state *state;
1275         int id;
1276
1277         /* allocate memory for the internal state */
1278         state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
1279         if (!state) {
1280                 printk(KERN_ERR "Can't allocate memory for tda10045 state\n");
1281                 return NULL;
1282         }
1283
1284         /* setup the state */
1285         state->config = config;
1286         state->i2c = i2c;
1287         state->demod_type = TDA1004X_DEMOD_TDA10045;
1288
1289         /* check if the demod is there */
1290         id = tda1004x_read_byte(state, TDA1004X_CHIPID);
1291         if (id < 0) {
1292                 printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
1293                 kfree(state);
1294                 return NULL;
1295         }
1296
1297         if (id != 0x25) {
1298                 printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
1299                 kfree(state);
1300                 return NULL;
1301         }
1302
1303         /* create dvb_frontend */
1304         memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
1305         state->frontend.demodulator_priv = state;
1306         return &state->frontend;
1307 }
1308
1309 static struct dvb_frontend_ops tda10046_ops = {
1310         .delsys = { SYS_DVBT },
1311         .info = {
1312                 .name = "Philips TDA10046H DVB-T",
1313                 .frequency_min = 51000000,
1314                 .frequency_max = 858000000,
1315                 .frequency_stepsize = 166667,
1316                 .caps =
1317                     FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
1318                     FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
1319                     FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
1320                     FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
1321         },
1322
1323         .release = tda1004x_release,
1324
1325         .init = tda10046_init,
1326         .sleep = tda1004x_sleep,
1327         .write = tda1004x_write,
1328         .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
1329
1330         .set_frontend = tda1004x_set_fe,
1331         .get_frontend = tda1004x_get_fe,
1332         .get_tune_settings = tda1004x_get_tune_settings,
1333
1334         .read_status = tda1004x_read_status,
1335         .read_ber = tda1004x_read_ber,
1336         .read_signal_strength = tda1004x_read_signal_strength,
1337         .read_snr = tda1004x_read_snr,
1338         .read_ucblocks = tda1004x_read_ucblocks,
1339 };
1340
1341 struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
1342                                      struct i2c_adapter* i2c)
1343 {
1344         struct tda1004x_state *state;
1345         int id;
1346
1347         /* allocate memory for the internal state */
1348         state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
1349         if (!state) {
1350                 printk(KERN_ERR "Can't allocate memory for tda10046 state\n");
1351                 return NULL;
1352         }
1353
1354         /* setup the state */
1355         state->config = config;
1356         state->i2c = i2c;
1357         state->demod_type = TDA1004X_DEMOD_TDA10046;
1358
1359         /* check if the demod is there */
1360         id = tda1004x_read_byte(state, TDA1004X_CHIPID);
1361         if (id < 0) {
1362                 printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
1363                 kfree(state);
1364                 return NULL;
1365         }
1366         if (id != 0x46) {
1367                 printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
1368                 kfree(state);
1369                 return NULL;
1370         }
1371
1372         /* create dvb_frontend */
1373         memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
1374         state->frontend.demodulator_priv = state;
1375         return &state->frontend;
1376 }
1377
1378 module_param(debug, int, 0644);
1379 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
1380
1381 MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator");
1382 MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");
1383 MODULE_LICENSE("GPL");
1384
1385 EXPORT_SYMBOL(tda10045_attach);
1386 EXPORT_SYMBOL(tda10046_attach);