drivers/input/rmi4/rmi_driver.c

   1 /*
   2  * Copyright (c) 2011-2016 Synaptics Incorporated
   3  * Copyright (c) 2011 Unixphere
   4  *
   5  * This driver provides the core support for a single RMI4-based device.
   6  *
   7  * The RMI4 specification can be found here (URL split for line length):
   8  *
   9  * http://www.synaptics.com/sites/default/files/
  10  *      511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
  11  *
  12  * This program is free software; you can redistribute it and/or modify it
  13  * under the terms of the GNU General Public License version 2 as published by
  14  * the Free Software Foundation.
  15  */
  16
  17 #include <linux/bitmap.h>
  18 #include <linux/delay.h>
  19 #include <linux/fs.h>
  20 #include <linux/irq.h>
  21 #include <linux/pm.h>
  22 #include <linux/slab.h>
  23 #include <linux/of.h>
  24 #include <linux/irqdomain.h>
  25 #include <uapi/linux/input.h>
  26 #include <linux/rmi.h>
  27 #include "rmi_bus.h"
  28 #include "rmi_driver.h"
  29
  30 #define HAS_NONSTANDARD_PDT_MASK 0x40
  31 #define RMI4_MAX_PAGE 0xff
  32 #define RMI4_PAGE_SIZE 0x100
  33 #define RMI4_PAGE_MASK 0xFF00
  34
  35 #define RMI_DEVICE_RESET_CMD    0x01
  36 #define DEFAULT_RESET_DELAY_MS  100
  37
  38 void rmi_free_function_list(struct rmi_device *rmi_dev)
  39 {
  40         struct rmi_function *fn, *tmp;
  41         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
  42
  43         rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
  44
  45         /* Doing it in the reverse order so F01 will be removed last */
  46         list_for_each_entry_safe_reverse(fn, tmp,
  47                                          &data->function_list, node) {
  48                 list_del(&fn->node);
  49                 rmi_unregister_function(fn);
  50         }
  51
  52         devm_kfree(&rmi_dev->dev, data->irq_memory);
  53         data->irq_memory = NULL;
  54         data->irq_status = NULL;
  55         data->fn_irq_bits = NULL;
  56         data->current_irq_mask = NULL;
  57         data->new_irq_mask = NULL;
  58
  59         data->f01_container = NULL;
  60         data->f34_container = NULL;
  61 }
  62
  63 static int reset_one_function(struct rmi_function *fn)
  64 {
  65         struct rmi_function_handler *fh;
  66         int retval = 0;
  67
  68         if (!fn || !fn->dev.driver)
  69                 return 0;
  70
  71         fh = to_rmi_function_handler(fn->dev.driver);
  72         if (fh->reset) {
  73                 retval = fh->reset(fn);
  74                 if (retval < 0)
  75                         dev_err(&fn->dev, "Reset failed with code %d.\n",
  76                                 retval);
  77         }
  78
  79         return retval;
  80 }
  81
  82 static int configure_one_function(struct rmi_function *fn)
  83 {
  84         struct rmi_function_handler *fh;
  85         int retval = 0;
  86
  87         if (!fn || !fn->dev.driver)
  88                 return 0;
  89
  90         fh = to_rmi_function_handler(fn->dev.driver);
  91         if (fh->config) {
  92                 retval = fh->config(fn);
  93                 if (retval < 0)
  94                         dev_err(&fn->dev, "Config failed with code %d.\n",
  95                                 retval);
  96         }
  97
  98         return retval;
  99 }
 100
 101 static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
 102 {
 103         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 104         struct rmi_function *entry;
 105         int retval;
 106
 107         list_for_each_entry(entry, &data->function_list, node) {
 108                 retval = reset_one_function(entry);
 109                 if (retval < 0)
 110                         return retval;
 111         }
 112
 113         return 0;
 114 }
 115
 116 static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
 117 {
 118         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 119         struct rmi_function *entry;
 120         int retval;
 121
 122         list_for_each_entry(entry, &data->function_list, node) {
 123                 retval = configure_one_function(entry);
 124                 if (retval < 0)
 125                         return retval;
 126         }
 127
 128         return 0;
 129 }
 130
 131 static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 132 {
 133         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 134         struct device *dev = &rmi_dev->dev;
 135         int i;
 136         int error;
 137
 138         if (!data)
 139                 return 0;
 140
 141         if (!data->attn_data.data) {
 142                 error = rmi_read_block(rmi_dev,
 143                                 data->f01_container->fd.data_base_addr + 1,
 144                                 data->irq_status, data->num_of_irq_regs);
 145                 if (error < 0) {
 146                         dev_err(dev, "Failed to read irqs, code=%d\n", error);
 147                         return error;
 148                 }
 149         }
 150
 151         mutex_lock(&data->irq_mutex);
 152         bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
 153                data->irq_count);
 154         /*
 155          * At this point, irq_status has all bits that are set in the
 156          * interrupt status register and are enabled.
 157          */
 158         mutex_unlock(&data->irq_mutex);
 159
 160         for_each_set_bit(i, data->irq_status, data->irq_count)
 161                 handle_nested_irq(irq_find_mapping(data->irqdomain, i));
 162
 163         if (data->input)
 164                 input_sync(data->input);
 165
 166         return 0;
 167 }
 168
 169 void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
 170                        void *data, size_t size)
 171 {
 172         struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 173         struct rmi4_attn_data attn_data;
 174         void *fifo_data;
 175
 176         if (!drvdata->enabled)
 177                 return;
 178
 179         fifo_data = kmemdup(data, size, GFP_ATOMIC);
 180         if (!fifo_data)
 181                 return;
 182
 183         attn_data.irq_status = irq_status;
 184         attn_data.size = size;
 185         attn_data.data = fifo_data;
 186
 187         kfifo_put(&drvdata->attn_fifo, attn_data);
 188 }
 189 EXPORT_SYMBOL_GPL(rmi_set_attn_data);
 190
 191 static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
 192 {
 193         struct rmi_device *rmi_dev = dev_id;
 194         struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 195         struct rmi4_attn_data attn_data = {0};
 196         int ret, count;
 197
 198         count = kfifo_get(&drvdata->attn_fifo, &attn_data);
 199         if (count) {
 200                 *(drvdata->irq_status) = attn_data.irq_status;
 201                 drvdata->attn_data = attn_data;
 202         }
 203
 204         ret = rmi_process_interrupt_requests(rmi_dev);
 205         if (ret)
 206                 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
 207                         "Failed to process interrupt request: %d\n", ret);
 208
 209         if (count) {
 210                 kfree(attn_data.data);
 211                 attn_data.data = NULL;
 212         }
 213
 214         if (!kfifo_is_empty(&drvdata->attn_fifo))
 215                 return rmi_irq_fn(irq, dev_id);
 216
 217         return IRQ_HANDLED;
 218 }
 219
 220 static int rmi_irq_init(struct rmi_device *rmi_dev)
 221 {
 222         struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
 223         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 224         int irq_flags = irq_get_trigger_type(pdata->irq);
 225         int ret;
 226
 227         if (!irq_flags)
 228                 irq_flags = IRQF_TRIGGER_LOW;
 229
 230         ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL,
 231                                         rmi_irq_fn, irq_flags | IRQF_ONESHOT,
 232                                         dev_driver_string(rmi_dev->xport->dev),
 233                                         rmi_dev);
 234         if (ret < 0) {
 235                 dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n",
 236                         pdata->irq);
 237
 238                 return ret;
 239         }
 240
 241         data->enabled = true;
 242
 243         return 0;
 244 }
 245
 246 struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number)
 247 {
 248         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 249         struct rmi_function *entry;
 250
 251         list_for_each_entry(entry, &data->function_list, node) {
 252                 if (entry->fd.function_number == number)
 253                         return entry;
 254         }
 255
 256         return NULL;
 257 }
 258
 259 static int suspend_one_function(struct rmi_function *fn)
 260 {
 261         struct rmi_function_handler *fh;
 262         int retval = 0;
 263
 264         if (!fn || !fn->dev.driver)
 265                 return 0;
 266
 267         fh = to_rmi_function_handler(fn->dev.driver);
 268         if (fh->suspend) {
 269                 retval = fh->suspend(fn);
 270                 if (retval < 0)
 271                         dev_err(&fn->dev, "Suspend failed with code %d.\n",
 272                                 retval);
 273         }
 274
 275         return retval;
 276 }
 277
 278 static int rmi_suspend_functions(struct rmi_device *rmi_dev)
 279 {
 280         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 281         struct rmi_function *entry;
 282         int retval;
 283
 284         list_for_each_entry(entry, &data->function_list, node) {
 285                 retval = suspend_one_function(entry);
 286                 if (retval < 0)
 287                         return retval;
 288         }
 289
 290         return 0;
 291 }
 292
 293 static int resume_one_function(struct rmi_function *fn)
 294 {
 295         struct rmi_function_handler *fh;
 296         int retval = 0;
 297
 298         if (!fn || !fn->dev.driver)
 299                 return 0;
 300
 301         fh = to_rmi_function_handler(fn->dev.driver);
 302         if (fh->resume) {
 303                 retval = fh->resume(fn);
 304                 if (retval < 0)
 305                         dev_err(&fn->dev, "Resume failed with code %d.\n",
 306                                 retval);
 307         }
 308
 309         return retval;
 310 }
 311
 312 static int rmi_resume_functions(struct rmi_device *rmi_dev)
 313 {
 314         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 315         struct rmi_function *entry;
 316         int retval;
 317
 318         list_for_each_entry(entry, &data->function_list, node) {
 319                 retval = resume_one_function(entry);
 320                 if (retval < 0)
 321                         return retval;
 322         }
 323
 324         return 0;
 325 }
 326
 327 int rmi_enable_sensor(struct rmi_device *rmi_dev)
 328 {
 329         int retval = 0;
 330
 331         retval = rmi_driver_process_config_requests(rmi_dev);
 332         if (retval < 0)
 333                 return retval;
 334
 335         return rmi_process_interrupt_requests(rmi_dev);
 336 }
 337
 338 /**
 339  * rmi_driver_set_input_params - set input device id and other data.
 340  *
 341  * @rmi_dev: Pointer to an RMI device
 342  * @input: Pointer to input device
 343  *
 344  */
 345 static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
 346                                 struct input_dev *input)
 347 {
 348         input->name = SYNAPTICS_INPUT_DEVICE_NAME;
 349         input->id.vendor  = SYNAPTICS_VENDOR_ID;
 350         input->id.bustype = BUS_RMI;
 351         return 0;
 352 }
 353
 354 static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
 355                                 struct input_dev *input)
 356 {
 357         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 358         const char *device_name = rmi_f01_get_product_ID(data->f01_container);
 359         char *name;
 360
 361         name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
 362                               "Synaptics %s", device_name);
 363         if (!name)
 364                 return;
 365
 366         input->name = name;
 367 }
 368
 369 static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
 370                                    unsigned long *mask)
 371 {
 372         int error = 0;
 373         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 374         struct device *dev = &rmi_dev->dev;
 375
 376         mutex_lock(&data->irq_mutex);
 377         bitmap_or(data->new_irq_mask,
 378                   data->current_irq_mask, mask, data->irq_count);
 379
 380         error = rmi_write_block(rmi_dev,
 381                         data->f01_container->fd.control_base_addr + 1,
 382                         data->new_irq_mask, data->num_of_irq_regs);
 383         if (error < 0) {
 384                 dev_err(dev, "%s: Failed to change enabled interrupts!",
 385                                                         __func__);
 386                 goto error_unlock;
 387         }
 388         bitmap_copy(data->current_irq_mask, data->new_irq_mask,
 389                     data->num_of_irq_regs);
 390
 391 error_unlock:
 392         mutex_unlock(&data->irq_mutex);
 393         return error;
 394 }
 395
 396 static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
 397                                      unsigned long *mask)
 398 {
 399         int error = 0;
 400         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 401         struct device *dev = &rmi_dev->dev;
 402
 403         mutex_lock(&data->irq_mutex);
 404         bitmap_andnot(data->new_irq_mask,
 405                   data->current_irq_mask, mask, data->irq_count);
 406
 407         error = rmi_write_block(rmi_dev,
 408                         data->f01_container->fd.control_base_addr + 1,
 409                         data->new_irq_mask, data->num_of_irq_regs);
 410         if (error < 0) {
 411                 dev_err(dev, "%s: Failed to change enabled interrupts!",
 412                                                         __func__);
 413                 goto error_unlock;
 414         }
 415         bitmap_copy(data->current_irq_mask, data->new_irq_mask,
 416                     data->num_of_irq_regs);
 417
 418 error_unlock:
 419         mutex_unlock(&data->irq_mutex);
 420         return error;
 421 }
 422
 423 static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
 424 {
 425         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 426         int error;
 427
 428         /*
 429          * Can get called before the driver is fully ready to deal with
 430          * this situation.
 431          */
 432         if (!data || !data->f01_container) {
 433                 dev_warn(&rmi_dev->dev,
 434                          "Not ready to handle reset yet!\n");
 435                 return 0;
 436         }
 437
 438         error = rmi_read_block(rmi_dev,
 439                                data->f01_container->fd.control_base_addr + 1,
 440                                data->current_irq_mask, data->num_of_irq_regs);
 441         if (error < 0) {
 442                 dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
 443                         __func__);
 444                 return error;
 445         }
 446
 447         error = rmi_driver_process_reset_requests(rmi_dev);
 448         if (error < 0)
 449                 return error;
 450
 451         error = rmi_driver_process_config_requests(rmi_dev);
 452         if (error < 0)
 453                 return error;
 454
 455         return 0;
 456 }
 457
 458 static int rmi_read_pdt_entry(struct rmi_device *rmi_dev,
 459                               struct pdt_entry *entry, u16 pdt_address)
 460 {
 461         u8 buf[RMI_PDT_ENTRY_SIZE];
 462         int error;
 463
 464         error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
 465         if (error) {
 466                 dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
 467                                 pdt_address, error);
 468                 return error;
 469         }
 470
 471         entry->page_start = pdt_address & RMI4_PAGE_MASK;
 472         entry->query_base_addr = buf[0];
 473         entry->command_base_addr = buf[1];
 474         entry->control_base_addr = buf[2];
 475         entry->data_base_addr = buf[3];
 476         entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
 477         entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
 478         entry->function_number = buf[5];
 479
 480         return 0;
 481 }
 482
 483 static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
 484                                       struct rmi_function_descriptor *fd)
 485 {
 486         fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
 487         fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
 488         fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
 489         fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
 490         fd->function_number = pdt->function_number;
 491         fd->interrupt_source_count = pdt->interrupt_source_count;
 492         fd->function_version = pdt->function_version;
 493 }
 494
 495 #define RMI_SCAN_CONTINUE       0
 496 #define RMI_SCAN_DONE           1
 497
 498 static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
 499                              int page,
 500                              int *empty_pages,
 501                              void *ctx,
 502                              int (*callback)(struct rmi_device *rmi_dev,
 503                                              void *ctx,
 504                                              const struct pdt_entry *entry))
 505 {
 506         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 507         struct pdt_entry pdt_entry;
 508         u16 page_start = RMI4_PAGE_SIZE * page;
 509         u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
 510         u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
 511         u16 addr;
 512         int error;
 513         int retval;
 514
 515         for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
 516                 error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
 517                 if (error)
 518                         return error;
 519
 520                 if (RMI4_END_OF_PDT(pdt_entry.function_number))
 521                         break;
 522
 523                 retval = callback(rmi_dev, ctx, &pdt_entry);
 524                 if (retval != RMI_SCAN_CONTINUE)
 525                         return retval;
 526         }
 527
 528         /*
 529          * Count number of empty PDT pages. If a gap of two pages
 530          * or more is found, stop scanning.
 531          */
 532         if (addr == pdt_start)
 533                 ++*empty_pages;
 534         else
 535                 *empty_pages = 0;
 536
 537         return (data->bootloader_mode || *empty_pages >= 2) ?
 538                                         RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
 539 }
 540
 541 int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
 542                  int (*callback)(struct rmi_device *rmi_dev,
 543                  void *ctx, const struct pdt_entry *entry))
 544 {
 545         int page;
 546         int empty_pages = 0;
 547         int retval = RMI_SCAN_DONE;
 548
 549         for (page = 0; page <= RMI4_MAX_PAGE; page++) {
 550                 retval = rmi_scan_pdt_page(rmi_dev, page, &empty_pages,
 551                                            ctx, callback);
 552                 if (retval != RMI_SCAN_CONTINUE)
 553                         break;
 554         }
 555
 556         return retval < 0 ? retval : 0;
 557 }
 558
 559 int rmi_read_register_desc(struct rmi_device *d, u16 addr,
 560                                 struct rmi_register_descriptor *rdesc)
 561 {
 562         int ret;
 563         u8 size_presence_reg;
 564         u8 buf[35];
 565         int presense_offset = 1;
 566         u8 *struct_buf;
 567         int reg;
 568         int offset = 0;
 569         int map_offset = 0;
 570         int i;
 571         int b;
 572
 573         /*
 574          * The first register of the register descriptor is the size of
 575          * the register descriptor's presense register.
 576          */
 577         ret = rmi_read(d, addr, &size_presence_reg);
 578         if (ret)
 579                 return ret;
 580         ++addr;
 581
 582         if (size_presence_reg < 0 || size_presence_reg > 35)
 583                 return -EIO;
 584
 585         memset(buf, 0, sizeof(buf));
 586
 587         /*
 588          * The presence register contains the size of the register structure
 589          * and a bitmap which identified which packet registers are present
 590          * for this particular register type (ie query, control, or data).
 591          */
 592         ret = rmi_read_block(d, addr, buf, size_presence_reg);
 593         if (ret)
 594                 return ret;
 595         ++addr;
 596
 597         if (buf[0] == 0) {
 598                 presense_offset = 3;
 599                 rdesc->struct_size = buf[1] | (buf[2] << 8);
 600         } else {
 601                 rdesc->struct_size = buf[0];
 602         }
 603
 604         for (i = presense_offset; i < size_presence_reg; i++) {
 605                 for (b = 0; b < 8; b++) {
 606                         if (buf[i] & (0x1 << b))
 607                                 bitmap_set(rdesc->presense_map, map_offset, 1);
 608                         ++map_offset;
 609                 }
 610         }
 611
 612         rdesc->num_registers = bitmap_weight(rdesc->presense_map,
 613                                                 RMI_REG_DESC_PRESENSE_BITS);
 614
 615         rdesc->registers = devm_kcalloc(&d->dev,
 616                                         rdesc->num_registers,
 617                                         sizeof(struct rmi_register_desc_item),
 618                                         GFP_KERNEL);
 619         if (!rdesc->registers)
 620                 return -ENOMEM;
 621
 622         /*
 623          * Allocate a temporary buffer to hold the register structure.
 624          * I'm not using devm_kzalloc here since it will not be retained
 625          * after exiting this function
 626          */
 627         struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
 628         if (!struct_buf)
 629                 return -ENOMEM;
 630
 631         /*
 632          * The register structure contains information about every packet
 633          * register of this type. This includes the size of the packet
 634          * register and a bitmap of all subpackets contained in the packet
 635          * register.
 636          */
 637         ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
 638         if (ret)
 639                 goto free_struct_buff;
 640
 641         reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
 642         for (i = 0; i < rdesc->num_registers; i++) {
 643                 struct rmi_register_desc_item *item = &rdesc->registers[i];
 644                 int reg_size = struct_buf[offset];
 645
 646                 ++offset;
 647                 if (reg_size == 0) {
 648                         reg_size = struct_buf[offset] |
 649                                         (struct_buf[offset + 1] << 8);
 650                         offset += 2;
 651                 }
 652
 653                 if (reg_size == 0) {
 654                         reg_size = struct_buf[offset] |
 655                                         (struct_buf[offset + 1] << 8) |
 656                                         (struct_buf[offset + 2] << 16) |
 657                                         (struct_buf[offset + 3] << 24);
 658                         offset += 4;
 659                 }
 660
 661                 item->reg = reg;
 662                 item->reg_size = reg_size;
 663
 664                 map_offset = 0;
 665
 666                 do {
 667                         for (b = 0; b < 7; b++) {
 668                                 if (struct_buf[offset] & (0x1 << b))
 669                                         bitmap_set(item->subpacket_map,
 670                                                 map_offset, 1);
 671                                 ++map_offset;
 672                         }
 673                 } while (struct_buf[offset++] & 0x80);
 674
 675                 item->num_subpackets = bitmap_weight(item->subpacket_map,
 676                                                 RMI_REG_DESC_SUBPACKET_BITS);
 677
 678                 rmi_dbg(RMI_DEBUG_CORE, &d->dev,
 679                         "%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
 680                         item->reg, item->reg_size, item->num_subpackets);
 681
 682                 reg = find_next_bit(rdesc->presense_map,
 683                                 RMI_REG_DESC_PRESENSE_BITS, reg + 1);
 684         }
 685
 686 free_struct_buff:
 687         kfree(struct_buf);
 688         return ret;
 689 }
 690
 691 const struct rmi_register_desc_item *rmi_get_register_desc_item(
 692                                 struct rmi_register_descriptor *rdesc, u16 reg)
 693 {
 694         const struct rmi_register_desc_item *item;
 695         int i;
 696
 697         for (i = 0; i < rdesc->num_registers; i++) {
 698                 item = &rdesc->registers[i];
 699                 if (item->reg == reg)
 700                         return item;
 701         }
 702
 703         return NULL;
 704 }
 705
 706 size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
 707 {
 708         const struct rmi_register_desc_item *item;
 709         int i;
 710         size_t size = 0;
 711
 712         for (i = 0; i < rdesc->num_registers; i++) {
 713                 item = &rdesc->registers[i];
 714                 size += item->reg_size;
 715         }
 716         return size;
 717 }
 718
 719 /* Compute the register offset relative to the base address */
 720 int rmi_register_desc_calc_reg_offset(
 721                 struct rmi_register_descriptor *rdesc, u16 reg)
 722 {
 723         const struct rmi_register_desc_item *item;
 724         int offset = 0;
 725         int i;
 726
 727         for (i = 0; i < rdesc->num_registers; i++) {
 728                 item = &rdesc->registers[i];
 729                 if (item->reg == reg)
 730                         return offset;
 731                 ++offset;
 732         }
 733         return -1;
 734 }
 735
 736 bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
 737         u8 subpacket)
 738 {
 739         return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
 740                                 subpacket) == subpacket;
 741 }
 742
 743 static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
 744                                      const struct pdt_entry *pdt)
 745 {
 746         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 747         int ret;
 748         u8 status;
 749
 750         if (pdt->function_number == 0x34 && pdt->function_version > 1) {
 751                 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
 752                 if (ret) {
 753                         dev_err(&rmi_dev->dev,
 754                                 "Failed to read F34 status: %d.\n", ret);
 755                         return ret;
 756                 }
 757
 758                 if (status & BIT(7))
 759                         data->bootloader_mode = true;
 760         } else if (pdt->function_number == 0x01) {
 761                 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
 762                 if (ret) {
 763                         dev_err(&rmi_dev->dev,
 764                                 "Failed to read F01 status: %d.\n", ret);
 765                         return ret;
 766                 }
 767
 768                 if (status & BIT(6))
 769                         data->bootloader_mode = true;
 770         }
 771
 772         return 0;
 773 }
 774
 775 static int rmi_count_irqs(struct rmi_device *rmi_dev,
 776                          void *ctx, const struct pdt_entry *pdt)
 777 {
 778         int *irq_count = ctx;
 779         int ret;
 780
 781         *irq_count += pdt->interrupt_source_count;
 782
 783         ret = rmi_check_bootloader_mode(rmi_dev, pdt);
 784         if (ret < 0)
 785                 return ret;
 786
 787         return RMI_SCAN_CONTINUE;
 788 }
 789
 790 int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
 791                       const struct pdt_entry *pdt)
 792 {
 793         int error;
 794
 795         if (pdt->function_number == 0x01) {
 796                 u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
 797                 u8 cmd_buf = RMI_DEVICE_RESET_CMD;
 798                 const struct rmi_device_platform_data *pdata =
 799                                 rmi_get_platform_data(rmi_dev);
 800
 801                 if (rmi_dev->xport->ops->reset) {
 802                         error = rmi_dev->xport->ops->reset(rmi_dev->xport,
 803                                                                 cmd_addr);
 804                         if (error)
 805                                 return error;
 806
 807                         return RMI_SCAN_DONE;
 808                 }
 809
 810                 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Sending reset\n");
 811                 error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
 812                 if (error) {
 813                         dev_err(&rmi_dev->dev,
 814                                 "Initial reset failed. Code = %d.\n", error);
 815                         return error;
 816                 }
 817
 818                 mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
 819
 820                 return RMI_SCAN_DONE;
 821         }
 822
 823         /* F01 should always be on page 0. If we don't find it there, fail. */
 824         return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
 825 }
 826
 827 static int rmi_create_function(struct rmi_device *rmi_dev,
 828                                void *ctx, const struct pdt_entry *pdt)
 829 {
 830         struct device *dev = &rmi_dev->dev;
 831         struct rmi_driver_data *data = dev_get_drvdata(dev);
 832         int *current_irq_count = ctx;
 833         struct rmi_function *fn;
 834         int i;
 835         int error;
 836
 837         rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
 838                         pdt->function_number);
 839
 840         fn = kzalloc(sizeof(struct rmi_function) +
 841                         BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
 842                      GFP_KERNEL);
 843         if (!fn) {
 844                 dev_err(dev, "Failed to allocate memory for F%02X\n",
 845                         pdt->function_number);
 846                 return -ENOMEM;
 847         }
 848
 849         INIT_LIST_HEAD(&fn->node);
 850         rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
 851
 852         fn->rmi_dev = rmi_dev;
 853
 854         fn->num_of_irqs = pdt->interrupt_source_count;
 855         fn->irq_pos = *current_irq_count;
 856         *current_irq_count += fn->num_of_irqs;
 857
 858         for (i = 0; i < fn->num_of_irqs; i++)
 859                 set_bit(fn->irq_pos + i, fn->irq_mask);
 860
 861         error = rmi_register_function(fn);
 862         if (error)
 863                 goto err_put_fn;
 864
 865         if (pdt->function_number == 0x01)
 866                 data->f01_container = fn;
 867         else if (pdt->function_number == 0x34)
 868                 data->f34_container = fn;
 869
 870         list_add_tail(&fn->node, &data->function_list);
 871
 872         return RMI_SCAN_CONTINUE;
 873
 874 err_put_fn:
 875         put_device(&fn->dev);
 876         return error;
 877 }
 878
 879 void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
 880 {
 881         struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
 882         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 883         int irq = pdata->irq;
 884         int irq_flags;
 885         int retval;
 886
 887         mutex_lock(&data->enabled_mutex);
 888
 889         if (data->enabled)
 890                 goto out;
 891
 892         enable_irq(irq);
 893         data->enabled = true;
 894         if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
 895                 retval = disable_irq_wake(irq);
 896                 if (retval)
 897                         dev_warn(&rmi_dev->dev,
 898                                  "Failed to disable irq for wake: %d\n",
 899                                  retval);
 900         }
 901
 902         /*
 903          * Call rmi_process_interrupt_requests() after enabling irq,
 904          * otherwise we may lose interrupt on edge-triggered systems.
 905          */
 906         irq_flags = irq_get_trigger_type(pdata->irq);
 907         if (irq_flags & IRQ_TYPE_EDGE_BOTH)
 908                 rmi_process_interrupt_requests(rmi_dev);
 909
 910 out:
 911         mutex_unlock(&data->enabled_mutex);
 912 }
 913
 914 void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
 915 {
 916         struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
 917         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 918         struct rmi4_attn_data attn_data = {0};
 919         int irq = pdata->irq;
 920         int retval, count;
 921
 922         mutex_lock(&data->enabled_mutex);
 923
 924         if (!data->enabled)
 925                 goto out;
 926
 927         data->enabled = false;
 928         disable_irq(irq);
 929         if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
 930                 retval = enable_irq_wake(irq);
 931                 if (retval)
 932                         dev_warn(&rmi_dev->dev,
 933                                  "Failed to enable irq for wake: %d\n",
 934                                  retval);
 935         }
 936
 937         /* make sure the fifo is clean */
 938         while (!kfifo_is_empty(&data->attn_fifo)) {
 939                 count = kfifo_get(&data->attn_fifo, &attn_data);
 940                 if (count)
 941                         kfree(attn_data.data);
 942         }
 943
 944 out:
 945         mutex_unlock(&data->enabled_mutex);
 946 }
 947
 948 int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake)
 949 {
 950         int retval;
 951
 952         retval = rmi_suspend_functions(rmi_dev);
 953         if (retval)
 954                 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
 955                         retval);
 956
 957         rmi_disable_irq(rmi_dev, enable_wake);
 958         return retval;
 959 }
 960 EXPORT_SYMBOL_GPL(rmi_driver_suspend);
 961
 962 int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake)
 963 {
 964         int retval;
 965
 966         rmi_enable_irq(rmi_dev, clear_wake);
 967
 968         retval = rmi_resume_functions(rmi_dev);
 969         if (retval)
 970                 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
 971                         retval);
 972
 973         return retval;
 974 }
 975 EXPORT_SYMBOL_GPL(rmi_driver_resume);
 976
 977 static int rmi_driver_remove(struct device *dev)
 978 {
 979         struct rmi_device *rmi_dev = to_rmi_device(dev);
 980         struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 981
 982         rmi_disable_irq(rmi_dev, false);
 983
 984         irq_domain_remove(data->irqdomain);
 985         data->irqdomain = NULL;
 986
 987         rmi_f34_remove_sysfs(rmi_dev);
 988         rmi_free_function_list(rmi_dev);
 989
 990         return 0;
 991 }
 992
 993 #ifdef CONFIG_OF
 994 static int rmi_driver_of_probe(struct device *dev,
 995                                 struct rmi_device_platform_data *pdata)
 996 {
 997         int retval;
 998
 999         retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms,
1000                                         "syna,reset-delay-ms", 1);
1001         if (retval)
1002                 return retval;
1003
1004         return 0;
1005 }
1006 #else
1007 static inline int rmi_driver_of_probe(struct device *dev,
1008                                         struct rmi_device_platform_data *pdata)
1009 {
1010         return -ENODEV;
1011 }
1012 #endif
1013
1014 int rmi_probe_interrupts(struct rmi_driver_data *data)
1015 {
1016         struct rmi_device *rmi_dev = data->rmi_dev;
1017         struct device *dev = &rmi_dev->dev;
1018         struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
1019         int irq_count = 0;
1020         size_t size;
1021         int retval;
1022
1023         /*
1024          * We need to count the IRQs and allocate their storage before scanning
1025          * the PDT and creating the function entries, because adding a new
1026          * function can trigger events that result in the IRQ related storage
1027          * being accessed.
1028          */
1029         rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
1030         data->bootloader_mode = false;
1031
1032         retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
1033         if (retval < 0) {
1034                 dev_err(dev, "IRQ counting failed with code %d.\n", retval);
1035                 return retval;
1036         }
1037
1038         if (data->bootloader_mode)
1039                 dev_warn(dev, "Device in bootloader mode.\n");
1040
1041         /* Allocate and register a linear revmap irq_domain */
1042         data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
1043                                                    &irq_domain_simple_ops,
1044                                                    data);
1045         if (!data->irqdomain) {
1046                 dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
1047                 return -ENOMEM;
1048         }
1049
1050         data->irq_count = irq_count;
1051         data->num_of_irq_regs = (data->irq_count + 7) / 8;
1052
1053         size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
1054         data->irq_memory = devm_kcalloc(dev, size, 4, GFP_KERNEL);
1055         if (!data->irq_memory) {
1056                 dev_err(dev, "Failed to allocate memory for irq masks.\n");
1057                 return -ENOMEM;
1058         }
1059
1060         data->irq_status        = data->irq_memory + size * 0;
1061         data->fn_irq_bits       = data->irq_memory + size * 1;
1062         data->current_irq_mask  = data->irq_memory + size * 2;
1063         data->new_irq_mask      = data->irq_memory + size * 3;
1064
1065         return retval;
1066 }
1067
1068 int rmi_init_functions(struct rmi_driver_data *data)
1069 {
1070         struct rmi_device *rmi_dev = data->rmi_dev;
1071         struct device *dev = &rmi_dev->dev;
1072         int irq_count = 0;
1073         int retval;
1074
1075         rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
1076         retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
1077         if (retval < 0) {
1078                 dev_err(dev, "Function creation failed with code %d.\n",
1079                         retval);
1080                 goto err_destroy_functions;
1081         }
1082
1083         if (!data->f01_container) {
1084                 dev_err(dev, "Missing F01 container!\n");
1085                 retval = -EINVAL;
1086                 goto err_destroy_functions;
1087         }
1088
1089         retval = rmi_read_block(rmi_dev,
1090                                 data->f01_container->fd.control_base_addr + 1,
1091                                 data->current_irq_mask, data->num_of_irq_regs);
1092         if (retval < 0) {
1093                 dev_err(dev, "%s: Failed to read current IRQ mask.\n",
1094                         __func__);
1095                 goto err_destroy_functions;
1096         }
1097
1098         return 0;
1099
1100 err_destroy_functions:
1101         rmi_free_function_list(rmi_dev);
1102         return retval;
1103 }
1104
1105 static int rmi_driver_probe(struct device *dev)
1106 {
1107         struct rmi_driver *rmi_driver;
1108         struct rmi_driver_data *data;
1109         struct rmi_device_platform_data *pdata;
1110         struct rmi_device *rmi_dev;
1111         int retval;
1112
1113         rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
1114                         __func__);
1115
1116         if (!rmi_is_physical_device(dev)) {
1117                 rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
1118                 return -ENODEV;
1119         }
1120
1121         rmi_dev = to_rmi_device(dev);
1122         rmi_driver = to_rmi_driver(dev->driver);
1123         rmi_dev->driver = rmi_driver;
1124
1125         pdata = rmi_get_platform_data(rmi_dev);
1126
1127         if (rmi_dev->xport->dev->of_node) {
1128                 retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata);
1129                 if (retval)
1130                         return retval;
1131         }
1132
1133         data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
1134         if (!data)
1135                 return -ENOMEM;
1136
1137         INIT_LIST_HEAD(&data->function_list);
1138         data->rmi_dev = rmi_dev;
1139         dev_set_drvdata(&rmi_dev->dev, data);
1140
1141         /*
1142          * Right before a warm boot, the sensor might be in some unusual state,
1143          * such as F54 diagnostics, or F34 bootloader mode after a firmware
1144          * or configuration update.  In order to clear the sensor to a known
1145          * state and/or apply any updates, we issue a initial reset to clear any
1146          * previous settings and force it into normal operation.
1147          *
1148          * We have to do this before actually building the PDT because
1149          * the reflash updates (if any) might cause various registers to move
1150          * around.
1151          *
1152          * For a number of reasons, this initial reset may fail to return
1153          * within the specified time, but we'll still be able to bring up the
1154          * driver normally after that failure.  This occurs most commonly in
1155          * a cold boot situation (where then firmware takes longer to come up
1156          * than from a warm boot) and the reset_delay_ms in the platform data
1157          * has been set too short to accommodate that.  Since the sensor will
1158          * eventually come up and be usable, we don't want to just fail here
1159          * and leave the customer's device unusable.  So we warn them, and
1160          * continue processing.
1161          */
1162         retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
1163         if (retval < 0)
1164                 dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
1165
1166         retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
1167         if (retval < 0) {
1168                 /*
1169                  * we'll print out a warning and continue since
1170                  * failure to get the PDT properties is not a cause to fail
1171                  */
1172                 dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
1173                          PDT_PROPERTIES_LOCATION, retval);
1174         }
1175
1176         mutex_init(&data->irq_mutex);
1177         mutex_init(&data->enabled_mutex);
1178
1179         retval = rmi_probe_interrupts(data);
1180         if (retval)
1181                 goto err;
1182
1183         if (rmi_dev->xport->input) {
1184                 /*
1185                  * The transport driver already has an input device.
1186                  * In some cases it is preferable to reuse the transport
1187                  * devices input device instead of creating a new one here.
1188                  * One example is some HID touchpads report "pass-through"
1189                  * button events are not reported by rmi registers.
1190                  */
1191                 data->input = rmi_dev->xport->input;
1192         } else {
1193                 data->input = devm_input_allocate_device(dev);
1194                 if (!data->input) {
1195                         dev_err(dev, "%s: Failed to allocate input device.\n",
1196                                 __func__);
1197                         retval = -ENOMEM;
1198                         goto err;
1199                 }
1200                 rmi_driver_set_input_params(rmi_dev, data->input);
1201                 data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
1202                                                 "%s/input0", dev_name(dev));
1203         }
1204
1205         retval = rmi_init_functions(data);
1206         if (retval)
1207                 goto err;
1208
1209         retval = rmi_f34_create_sysfs(rmi_dev);
1210         if (retval)
1211                 goto err;
1212
1213         if (data->input) {
1214                 rmi_driver_set_input_name(rmi_dev, data->input);
1215                 if (!rmi_dev->xport->input) {
1216                         if (input_register_device(data->input)) {
1217                                 dev_err(dev, "%s: Failed to register input device.\n",
1218                                         __func__);
1219                                 goto err_destroy_functions;
1220                         }
1221                 }
1222         }
1223
1224         retval = rmi_irq_init(rmi_dev);
1225         if (retval < 0)
1226                 goto err_destroy_functions;
1227
1228         if (data->f01_container->dev.driver) {
1229                 /* Driver already bound, so enable ATTN now. */
1230                 retval = rmi_enable_sensor(rmi_dev);
1231                 if (retval)
1232                         goto err_disable_irq;
1233         }
1234
1235         return 0;
1236
1237 err_disable_irq:
1238         rmi_disable_irq(rmi_dev, false);
1239 err_destroy_functions:
1240         rmi_free_function_list(rmi_dev);
1241 err:
1242         return retval;
1243 }
1244
1245 static struct rmi_driver rmi_physical_driver = {
1246         .driver = {
1247                 .owner  = THIS_MODULE,
1248                 .name   = "rmi4_physical",
1249                 .bus    = &rmi_bus_type,
1250                 .probe = rmi_driver_probe,
1251                 .remove = rmi_driver_remove,
1252         },
1253         .reset_handler = rmi_driver_reset_handler,
1254         .clear_irq_bits = rmi_driver_clear_irq_bits,
1255         .set_irq_bits = rmi_driver_set_irq_bits,
1256         .set_input_params = rmi_driver_set_input_params,
1257 };
1258
1259 bool rmi_is_physical_driver(struct device_driver *drv)
1260 {
1261         return drv == &rmi_physical_driver.driver;
1262 }
1263
1264 int __init rmi_register_physical_driver(void)
1265 {
1266         int error;
1267
1268         error = driver_register(&rmi_physical_driver.driver);
1269         if (error) {
1270                 pr_err("%s: driver register failed, code=%d.\n", __func__,
1271                        error);
1272                 return error;
1273         }
1274
1275         return 0;
1276 }
1277
1278 void __exit rmi_unregister_physical_driver(void)
1279 {
1280         driver_unregister(&rmi_physical_driver.driver);
1281 }