Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-next
[sfrench/cifs-2.6.git] / drivers / ide / ide-pm.c
1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
3 #include <linux/gfp.h>
4 #include <linux/ide.h>
5
6 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
7 {
8         ide_drive_t *drive = to_ide_device(dev);
9         ide_drive_t *pair = ide_get_pair_dev(drive);
10         ide_hwif_t *hwif = drive->hwif;
11         struct request *rq;
12         struct ide_pm_state rqpm;
13         int ret;
14
15         if (ide_port_acpi(hwif)) {
16                 /* call ACPI _GTM only once */
17                 if ((drive->dn & 1) == 0 || pair == NULL)
18                         ide_acpi_get_timing(hwif);
19         }
20
21         memset(&rqpm, 0, sizeof(rqpm));
22         rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
23         ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
24         rq->special = &rqpm;
25         rqpm.pm_step = IDE_PM_START_SUSPEND;
26         if (mesg.event == PM_EVENT_PRETHAW)
27                 mesg.event = PM_EVENT_FREEZE;
28         rqpm.pm_state = mesg.event;
29
30         blk_execute_rq(drive->queue, NULL, rq, 0);
31         ret = scsi_req(rq)->result ? -EIO : 0;
32         blk_put_request(rq);
33
34         if (ret == 0 && ide_port_acpi(hwif)) {
35                 /* call ACPI _PS3 only after both devices are suspended */
36                 if ((drive->dn & 1) || pair == NULL)
37                         ide_acpi_set_state(hwif, 0);
38         }
39
40         return ret;
41 }
42
43 static void ide_end_sync_rq(struct request *rq, blk_status_t error)
44 {
45         complete(rq->end_io_data);
46 }
47
48 static int ide_pm_execute_rq(struct request *rq)
49 {
50         struct request_queue *q = rq->q;
51         DECLARE_COMPLETION_ONSTACK(wait);
52
53         rq->end_io_data = &wait;
54         rq->end_io = ide_end_sync_rq;
55
56         spin_lock_irq(q->queue_lock);
57         if (unlikely(blk_queue_dying(q))) {
58                 rq->rq_flags |= RQF_QUIET;
59                 scsi_req(rq)->result = -ENXIO;
60                 __blk_end_request_all(rq, BLK_STS_OK);
61                 spin_unlock_irq(q->queue_lock);
62                 return -ENXIO;
63         }
64         __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT);
65         __blk_run_queue_uncond(q);
66         spin_unlock_irq(q->queue_lock);
67
68         wait_for_completion_io(&wait);
69
70         return scsi_req(rq)->result ? -EIO : 0;
71 }
72
73 int generic_ide_resume(struct device *dev)
74 {
75         ide_drive_t *drive = to_ide_device(dev);
76         ide_drive_t *pair = ide_get_pair_dev(drive);
77         ide_hwif_t *hwif = drive->hwif;
78         struct request *rq;
79         struct ide_pm_state rqpm;
80         int err;
81
82         if (ide_port_acpi(hwif)) {
83                 /* call ACPI _PS0 / _STM only once */
84                 if ((drive->dn & 1) == 0 || pair == NULL) {
85                         ide_acpi_set_state(hwif, 1);
86                         ide_acpi_push_timing(hwif);
87                 }
88
89                 ide_acpi_exec_tfs(drive);
90         }
91
92         memset(&rqpm, 0, sizeof(rqpm));
93         rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
94         ide_req(rq)->type = ATA_PRIV_PM_RESUME;
95         rq->rq_flags |= RQF_PREEMPT;
96         rq->special = &rqpm;
97         rqpm.pm_step = IDE_PM_START_RESUME;
98         rqpm.pm_state = PM_EVENT_ON;
99
100         err = ide_pm_execute_rq(rq);
101         blk_put_request(rq);
102
103         if (err == 0 && dev->driver) {
104                 struct ide_driver *drv = to_ide_driver(dev->driver);
105
106                 if (drv->resume)
107                         drv->resume(drive);
108         }
109
110         return err;
111 }
112
113 void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
114 {
115         struct ide_pm_state *pm = rq->special;
116
117 #ifdef DEBUG_PM
118         printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
119                 drive->name, pm->pm_step);
120 #endif
121         if (drive->media != ide_disk)
122                 return;
123
124         switch (pm->pm_step) {
125         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
126                 if (pm->pm_state == PM_EVENT_FREEZE)
127                         pm->pm_step = IDE_PM_COMPLETED;
128                 else
129                         pm->pm_step = IDE_PM_STANDBY;
130                 break;
131         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
132                 pm->pm_step = IDE_PM_COMPLETED;
133                 break;
134         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
135                 pm->pm_step = IDE_PM_IDLE;
136                 break;
137         case IDE_PM_IDLE:               /* Resume step 2 (idle)*/
138                 pm->pm_step = IDE_PM_RESTORE_DMA;
139                 break;
140         }
141 }
142
143 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
144 {
145         struct ide_pm_state *pm = rq->special;
146         struct ide_cmd cmd = { };
147
148         switch (pm->pm_step) {
149         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
150                 if (drive->media != ide_disk)
151                         break;
152                 /* Not supported? Switch to next step now. */
153                 if (ata_id_flush_enabled(drive->id) == 0 ||
154                     (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
155                         ide_complete_power_step(drive, rq);
156                         return ide_stopped;
157                 }
158                 if (ata_id_flush_ext_enabled(drive->id))
159                         cmd.tf.command = ATA_CMD_FLUSH_EXT;
160                 else
161                         cmd.tf.command = ATA_CMD_FLUSH;
162                 goto out_do_tf;
163         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
164                 cmd.tf.command = ATA_CMD_STANDBYNOW1;
165                 goto out_do_tf;
166         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
167                 ide_set_max_pio(drive);
168                 /*
169                  * skip IDE_PM_IDLE for ATAPI devices
170                  */
171                 if (drive->media != ide_disk)
172                         pm->pm_step = IDE_PM_RESTORE_DMA;
173                 else
174                         ide_complete_power_step(drive, rq);
175                 return ide_stopped;
176         case IDE_PM_IDLE:               /* Resume step 2 (idle) */
177                 cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
178                 goto out_do_tf;
179         case IDE_PM_RESTORE_DMA:        /* Resume step 3 (restore DMA) */
180                 /*
181                  * Right now, all we do is call ide_set_dma(drive),
182                  * we could be smarter and check for current xfer_speed
183                  * in struct drive etc...
184                  */
185                 if (drive->hwif->dma_ops == NULL)
186                         break;
187                 /*
188                  * TODO: respect IDE_DFLAG_USING_DMA
189                  */
190                 ide_set_dma(drive);
191                 break;
192         }
193
194         pm->pm_step = IDE_PM_COMPLETED;
195
196         return ide_stopped;
197
198 out_do_tf:
199         cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
200         cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
201         cmd.protocol = ATA_PROT_NODATA;
202
203         return do_rw_taskfile(drive, &cmd);
204 }
205
206 /**
207  *      ide_complete_pm_rq - end the current Power Management request
208  *      @drive: target drive
209  *      @rq: request
210  *
211  *      This function cleans up the current PM request and stops the queue
212  *      if necessary.
213  */
214 void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
215 {
216         struct request_queue *q = drive->queue;
217         struct ide_pm_state *pm = rq->special;
218         unsigned long flags;
219
220         ide_complete_power_step(drive, rq);
221         if (pm->pm_step != IDE_PM_COMPLETED)
222                 return;
223
224 #ifdef DEBUG_PM
225         printk("%s: completing PM request, %s\n", drive->name,
226                (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
227 #endif
228         spin_lock_irqsave(q->queue_lock, flags);
229         if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
230                 blk_stop_queue(q);
231         else
232                 drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
233         spin_unlock_irqrestore(q->queue_lock, flags);
234
235         drive->hwif->rq = NULL;
236
237         if (blk_end_request(rq, BLK_STS_OK, 0))
238                 BUG();
239 }
240
241 void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
242 {
243         struct ide_pm_state *pm = rq->special;
244
245         if (blk_rq_is_private(rq) &&
246             ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
247             pm->pm_step == IDE_PM_START_SUSPEND)
248                 /* Mark drive blocked when starting the suspend sequence. */
249                 drive->dev_flags |= IDE_DFLAG_BLOCKED;
250         else if (blk_rq_is_private(rq) &&
251                  ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
252                  pm->pm_step == IDE_PM_START_RESUME) {
253                 /*
254                  * The first thing we do on wakeup is to wait for BSY bit to
255                  * go away (with a looong timeout) as a drive on this hwif may
256                  * just be POSTing itself.
257                  * We do that before even selecting as the "other" device on
258                  * the bus may be broken enough to walk on our toes at this
259                  * point.
260                  */
261                 ide_hwif_t *hwif = drive->hwif;
262                 const struct ide_tp_ops *tp_ops = hwif->tp_ops;
263                 struct request_queue *q = drive->queue;
264                 unsigned long flags;
265                 int rc;
266 #ifdef DEBUG_PM
267                 printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
268 #endif
269                 rc = ide_wait_not_busy(hwif, 35000);
270                 if (rc)
271                         printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
272                 tp_ops->dev_select(drive);
273                 tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
274                 rc = ide_wait_not_busy(hwif, 100000);
275                 if (rc)
276                         printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
277
278                 spin_lock_irqsave(q->queue_lock, flags);
279                 blk_start_queue(q);
280                 spin_unlock_irqrestore(q->queue_lock, flags);
281         }
282 }