Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
[sfrench/cifs-2.6.git] / drivers / hwmon / tc654.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * tc654.c - Linux kernel modules for fan speed controller
4  *
5  * Copyright (C) 2016 Allied Telesis Labs NZ
6  */
7
8 #include <linux/bitops.h>
9 #include <linux/err.h>
10 #include <linux/hwmon.h>
11 #include <linux/hwmon-sysfs.h>
12 #include <linux/i2c.h>
13 #include <linux/init.h>
14 #include <linux/jiffies.h>
15 #include <linux/module.h>
16 #include <linux/mutex.h>
17 #include <linux/slab.h>
18 #include <linux/util_macros.h>
19
20 enum tc654_regs {
21         TC654_REG_RPM1 = 0x00,  /* RPM Output 1 */
22         TC654_REG_RPM2 = 0x01,  /* RPM Output 2 */
23         TC654_REG_FAN_FAULT1 = 0x02,    /* Fan Fault 1 Threshold */
24         TC654_REG_FAN_FAULT2 = 0x03,    /* Fan Fault 2 Threshold */
25         TC654_REG_CONFIG = 0x04,        /* Configuration */
26         TC654_REG_STATUS = 0x05,        /* Status */
27         TC654_REG_DUTY_CYCLE = 0x06,    /* Fan Speed Duty Cycle */
28         TC654_REG_MFR_ID = 0x07,        /* Manufacturer Identification */
29         TC654_REG_VER_ID = 0x08,        /* Version Identification */
30 };
31
32 /* Macros to easily index the registers */
33 #define TC654_REG_RPM(idx)              (TC654_REG_RPM1 + (idx))
34 #define TC654_REG_FAN_FAULT(idx)        (TC654_REG_FAN_FAULT1 + (idx))
35
36 /* Config register bits */
37 #define TC654_REG_CONFIG_RES            BIT(6)  /* Resolution Selection */
38 #define TC654_REG_CONFIG_DUTYC          BIT(5)  /* Duty Cycle Control */
39 #define TC654_REG_CONFIG_SDM            BIT(0)  /* Shutdown Mode */
40
41 /* Status register bits */
42 #define TC654_REG_STATUS_F2F            BIT(1)  /* Fan 2 Fault */
43 #define TC654_REG_STATUS_F1F            BIT(0)  /* Fan 1 Fault */
44
45 /* RPM resolution for RPM Output registers */
46 #define TC654_HIGH_RPM_RESOLUTION       25      /* 25 RPM resolution */
47 #define TC654_LOW_RPM_RESOLUTION        50      /* 50 RPM resolution */
48
49 /* Convert to the fan fault RPM threshold from register value */
50 #define TC654_FAN_FAULT_FROM_REG(val)   ((val) * 50)    /* 50 RPM resolution */
51
52 /* Convert to register value from the fan fault RPM threshold */
53 #define TC654_FAN_FAULT_TO_REG(val)     (((val) / 50) & 0xff)
54
55 /* Register data is read (and cached) at most once per second. */
56 #define TC654_UPDATE_INTERVAL           HZ
57
58 struct tc654_data {
59         struct i2c_client *client;
60
61         /* update mutex */
62         struct mutex update_lock;
63
64         /* tc654 register cache */
65         bool valid;
66         unsigned long last_updated;     /* in jiffies */
67
68         u8 rpm_output[2];       /* The fan RPM data for fans 1 and 2 is then
69                                  * written to registers RPM1 and RPM2
70                                  */
71         u8 fan_fault[2];        /* The Fan Fault Threshold Registers are used to
72                                  * set the fan fault threshold levels for fan 1
73                                  * and fan 2
74                                  */
75         u8 config;      /* The Configuration Register is an 8-bit read/
76                          * writable multi-function control register
77                          *   7: Fan Fault Clear
78                          *      1 = Clear Fan Fault
79                          *      0 = Normal Operation (default)
80                          *   6: Resolution Selection for RPM Output Registers
81                          *      RPM Output Registers (RPM1 and RPM2) will be
82                          *      set for
83                          *      1 = 25 RPM (9-bit) resolution
84                          *      0 = 50 RPM (8-bit) resolution (default)
85                          *   5: Duty Cycle Control Method
86                          *      The V OUT duty cycle will be controlled via
87                          *      1 = the SMBus interface.
88                          *      0 = via the V IN analog input pin. (default)
89                          * 4,3: Fan 2 Pulses Per Rotation
90                          *      00 = 1
91                          *      01 = 2 (default)
92                          *      10 = 4
93                          *      11 = 8
94                          * 2,1: Fan 1 Pulses Per Rotation
95                          *      00 = 1
96                          *      01 = 2 (default)
97                          *      10 = 4
98                          *      11 = 8
99                          *   0: Shutdown Mode
100                          *      1 = Shutdown mode.
101                          *      0 = Normal operation. (default)
102                          */
103         u8 status;      /* The Status register provides all the information
104                          * about what is going on within the TC654/TC655
105                          * devices.
106                          * 7,6: Unimplemented, Read as '0'
107                          *   5: Over-Temperature Fault Condition
108                          *      1 = Over-Temperature condition has occurred
109                          *      0 = Normal operation. V IN is less than 2.6V
110                          *   4: RPM2 Counter Overflow
111                          *      1 = Fault condition
112                          *      0 = Normal operation
113                          *   3: RPM1 Counter Overflow
114                          *      1 = Fault condition
115                          *      0 = Normal operation
116                          *   2: V IN Input Status
117                          *      1 = V IN is open
118                          *      0 = Normal operation. voltage present at V IN
119                          *   1: Fan 2 Fault
120                          *      1 = Fault condition
121                          *      0 = Normal operation
122                          *   0: Fan 1 Fault
123                          *      1 = Fault condition
124                          *      0 = Normal operation
125                          */
126         u8 duty_cycle;  /* The DUTY_CYCLE register is a 4-bit read/
127                          * writable register used to control the duty
128                          * cycle of the V OUT output.
129                          */
130 };
131
132 /* helper to grab and cache data, at most one time per second */
133 static struct tc654_data *tc654_update_client(struct device *dev)
134 {
135         struct tc654_data *data = dev_get_drvdata(dev);
136         struct i2c_client *client = data->client;
137         int ret = 0;
138
139         mutex_lock(&data->update_lock);
140         if (time_before(jiffies, data->last_updated + TC654_UPDATE_INTERVAL) &&
141             likely(data->valid))
142                 goto out;
143
144         ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(0));
145         if (ret < 0)
146                 goto out;
147         data->rpm_output[0] = ret;
148
149         ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(1));
150         if (ret < 0)
151                 goto out;
152         data->rpm_output[1] = ret;
153
154         ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(0));
155         if (ret < 0)
156                 goto out;
157         data->fan_fault[0] = ret;
158
159         ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(1));
160         if (ret < 0)
161                 goto out;
162         data->fan_fault[1] = ret;
163
164         ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
165         if (ret < 0)
166                 goto out;
167         data->config = ret;
168
169         ret = i2c_smbus_read_byte_data(client, TC654_REG_STATUS);
170         if (ret < 0)
171                 goto out;
172         data->status = ret;
173
174         ret = i2c_smbus_read_byte_data(client, TC654_REG_DUTY_CYCLE);
175         if (ret < 0)
176                 goto out;
177         data->duty_cycle = ret & 0x0f;
178
179         data->last_updated = jiffies;
180         data->valid = true;
181 out:
182         mutex_unlock(&data->update_lock);
183
184         if (ret < 0)            /* upon error, encode it in return value */
185                 data = ERR_PTR(ret);
186
187         return data;
188 }
189
190 /*
191  * sysfs attributes
192  */
193
194 static ssize_t fan_show(struct device *dev, struct device_attribute *da,
195                         char *buf)
196 {
197         int nr = to_sensor_dev_attr(da)->index;
198         struct tc654_data *data = tc654_update_client(dev);
199         int val;
200
201         if (IS_ERR(data))
202                 return PTR_ERR(data);
203
204         if (data->config & TC654_REG_CONFIG_RES)
205                 val = data->rpm_output[nr] * TC654_HIGH_RPM_RESOLUTION;
206         else
207                 val = data->rpm_output[nr] * TC654_LOW_RPM_RESOLUTION;
208
209         return sprintf(buf, "%d\n", val);
210 }
211
212 static ssize_t fan_min_show(struct device *dev, struct device_attribute *da,
213                             char *buf)
214 {
215         int nr = to_sensor_dev_attr(da)->index;
216         struct tc654_data *data = tc654_update_client(dev);
217
218         if (IS_ERR(data))
219                 return PTR_ERR(data);
220
221         return sprintf(buf, "%d\n",
222                        TC654_FAN_FAULT_FROM_REG(data->fan_fault[nr]));
223 }
224
225 static ssize_t fan_min_store(struct device *dev, struct device_attribute *da,
226                              const char *buf, size_t count)
227 {
228         int nr = to_sensor_dev_attr(da)->index;
229         struct tc654_data *data = dev_get_drvdata(dev);
230         struct i2c_client *client = data->client;
231         unsigned long val;
232         int ret;
233
234         if (kstrtoul(buf, 10, &val))
235                 return -EINVAL;
236
237         val = clamp_val(val, 0, 12750);
238
239         mutex_lock(&data->update_lock);
240
241         data->fan_fault[nr] = TC654_FAN_FAULT_TO_REG(val);
242         ret = i2c_smbus_write_byte_data(client, TC654_REG_FAN_FAULT(nr),
243                                         data->fan_fault[nr]);
244
245         mutex_unlock(&data->update_lock);
246         return ret < 0 ? ret : count;
247 }
248
249 static ssize_t fan_alarm_show(struct device *dev, struct device_attribute *da,
250                               char *buf)
251 {
252         int nr = to_sensor_dev_attr(da)->index;
253         struct tc654_data *data = tc654_update_client(dev);
254         int val;
255
256         if (IS_ERR(data))
257                 return PTR_ERR(data);
258
259         if (nr == 0)
260                 val = !!(data->status & TC654_REG_STATUS_F1F);
261         else
262                 val = !!(data->status & TC654_REG_STATUS_F2F);
263
264         return sprintf(buf, "%d\n", val);
265 }
266
267 static const u8 TC654_FAN_PULSE_SHIFT[] = { 1, 3 };
268
269 static ssize_t fan_pulses_show(struct device *dev,
270                                struct device_attribute *da, char *buf)
271 {
272         int nr = to_sensor_dev_attr(da)->index;
273         struct tc654_data *data = tc654_update_client(dev);
274         u8 val;
275
276         if (IS_ERR(data))
277                 return PTR_ERR(data);
278
279         val = BIT((data->config >> TC654_FAN_PULSE_SHIFT[nr]) & 0x03);
280         return sprintf(buf, "%d\n", val);
281 }
282
283 static ssize_t fan_pulses_store(struct device *dev,
284                                 struct device_attribute *da, const char *buf,
285                                 size_t count)
286 {
287         int nr = to_sensor_dev_attr(da)->index;
288         struct tc654_data *data = dev_get_drvdata(dev);
289         struct i2c_client *client = data->client;
290         u8 config;
291         unsigned long val;
292         int ret;
293
294         if (kstrtoul(buf, 10, &val))
295                 return -EINVAL;
296
297         switch (val) {
298         case 1:
299                 config = 0;
300                 break;
301         case 2:
302                 config = 1;
303                 break;
304         case 4:
305                 config = 2;
306                 break;
307         case 8:
308                 config = 3;
309                 break;
310         default:
311                 return -EINVAL;
312         }
313
314         mutex_lock(&data->update_lock);
315
316         data->config &= ~(0x03 << TC654_FAN_PULSE_SHIFT[nr]);
317         data->config |= (config << TC654_FAN_PULSE_SHIFT[nr]);
318         ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
319
320         mutex_unlock(&data->update_lock);
321         return ret < 0 ? ret : count;
322 }
323
324 static ssize_t pwm_mode_show(struct device *dev, struct device_attribute *da,
325                              char *buf)
326 {
327         struct tc654_data *data = tc654_update_client(dev);
328
329         if (IS_ERR(data))
330                 return PTR_ERR(data);
331
332         return sprintf(buf, "%d\n", !!(data->config & TC654_REG_CONFIG_DUTYC));
333 }
334
335 static ssize_t pwm_mode_store(struct device *dev, struct device_attribute *da,
336                               const char *buf, size_t count)
337 {
338         struct tc654_data *data = dev_get_drvdata(dev);
339         struct i2c_client *client = data->client;
340         unsigned long val;
341         int ret;
342
343         if (kstrtoul(buf, 10, &val))
344                 return -EINVAL;
345
346         if (val != 0 && val != 1)
347                 return -EINVAL;
348
349         mutex_lock(&data->update_lock);
350
351         if (val)
352                 data->config |= TC654_REG_CONFIG_DUTYC;
353         else
354                 data->config &= ~TC654_REG_CONFIG_DUTYC;
355
356         ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
357
358         mutex_unlock(&data->update_lock);
359         return ret < 0 ? ret : count;
360 }
361
362 static const int tc654_pwm_map[16] = { 77,  88, 102, 112, 124, 136, 148, 160,
363                                       172, 184, 196, 207, 219, 231, 243, 255};
364
365 static ssize_t pwm_show(struct device *dev, struct device_attribute *da,
366                         char *buf)
367 {
368         struct tc654_data *data = tc654_update_client(dev);
369         int pwm;
370
371         if (IS_ERR(data))
372                 return PTR_ERR(data);
373
374         if (data->config & TC654_REG_CONFIG_SDM)
375                 pwm = 0;
376         else
377                 pwm = tc654_pwm_map[data->duty_cycle];
378
379         return sprintf(buf, "%d\n", pwm);
380 }
381
382 static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
383                          const char *buf, size_t count)
384 {
385         struct tc654_data *data = dev_get_drvdata(dev);
386         struct i2c_client *client = data->client;
387         unsigned long val;
388         int ret;
389
390         if (kstrtoul(buf, 10, &val))
391                 return -EINVAL;
392         if (val > 255)
393                 return -EINVAL;
394
395         mutex_lock(&data->update_lock);
396
397         if (val == 0)
398                 data->config |= TC654_REG_CONFIG_SDM;
399         else
400                 data->config &= ~TC654_REG_CONFIG_SDM;
401
402         data->duty_cycle = find_closest(val, tc654_pwm_map,
403                                         ARRAY_SIZE(tc654_pwm_map));
404
405         ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
406         if (ret < 0)
407                 goto out;
408
409         ret = i2c_smbus_write_byte_data(client, TC654_REG_DUTY_CYCLE,
410                                         data->duty_cycle);
411
412 out:
413         mutex_unlock(&data->update_lock);
414         return ret < 0 ? ret : count;
415 }
416
417 static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
418 static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
419 static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
420 static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
421 static SENSOR_DEVICE_ATTR_RO(fan1_alarm, fan_alarm, 0);
422 static SENSOR_DEVICE_ATTR_RO(fan2_alarm, fan_alarm, 1);
423 static SENSOR_DEVICE_ATTR_RW(fan1_pulses, fan_pulses, 0);
424 static SENSOR_DEVICE_ATTR_RW(fan2_pulses, fan_pulses, 1);
425 static SENSOR_DEVICE_ATTR_RW(pwm1_mode, pwm_mode, 0);
426 static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
427
428 /* Driver data */
429 static struct attribute *tc654_attrs[] = {
430         &sensor_dev_attr_fan1_input.dev_attr.attr,
431         &sensor_dev_attr_fan2_input.dev_attr.attr,
432         &sensor_dev_attr_fan1_min.dev_attr.attr,
433         &sensor_dev_attr_fan2_min.dev_attr.attr,
434         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
435         &sensor_dev_attr_fan2_alarm.dev_attr.attr,
436         &sensor_dev_attr_fan1_pulses.dev_attr.attr,
437         &sensor_dev_attr_fan2_pulses.dev_attr.attr,
438         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
439         &sensor_dev_attr_pwm1.dev_attr.attr,
440         NULL
441 };
442
443 ATTRIBUTE_GROUPS(tc654);
444
445 /*
446  * device probe and removal
447  */
448
449 static int tc654_probe(struct i2c_client *client,
450                        const struct i2c_device_id *id)
451 {
452         struct device *dev = &client->dev;
453         struct tc654_data *data;
454         struct device *hwmon_dev;
455         int ret;
456
457         if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
458                 return -ENODEV;
459
460         data = devm_kzalloc(dev, sizeof(struct tc654_data), GFP_KERNEL);
461         if (!data)
462                 return -ENOMEM;
463
464         data->client = client;
465         mutex_init(&data->update_lock);
466
467         ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
468         if (ret < 0)
469                 return ret;
470
471         data->config = ret;
472
473         hwmon_dev =
474             devm_hwmon_device_register_with_groups(dev, client->name, data,
475                                                    tc654_groups);
476         return PTR_ERR_OR_ZERO(hwmon_dev);
477 }
478
479 static const struct i2c_device_id tc654_id[] = {
480         {"tc654", 0},
481         {"tc655", 0},
482         {}
483 };
484
485 MODULE_DEVICE_TABLE(i2c, tc654_id);
486
487 static struct i2c_driver tc654_driver = {
488         .driver = {
489                    .name = "tc654",
490                    },
491         .probe = tc654_probe,
492         .id_table = tc654_id,
493 };
494
495 module_i2c_driver(tc654_driver);
496
497 MODULE_AUTHOR("Allied Telesis Labs");
498 MODULE_DESCRIPTION("Microchip TC654/TC655 driver");
499 MODULE_LICENSE("GPL");