2 * Copyright 2006-2007 Advanced Micro Devices, Inc.
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
24 /****************************************************************************/
25 /*Portion I: Definitions shared between VBIOS and Driver */
26 /****************************************************************************/
32 #define ATOM_VERSION_MAJOR 0x00020000
33 #define ATOM_VERSION_MINOR 0x00000002
35 #define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
37 /* Endianness should be specified before inclusion,
38 * default to little endian
40 #ifndef ATOM_BIG_ENDIAN
41 #error Endian not specified
46 typedef unsigned long ULONG;
50 typedef unsigned char UCHAR;
54 typedef unsigned short USHORT;
60 #define ATOM_EXT_DAC 2
68 #define ATOM_CRTC_INVALID 0xFF
77 #define ATOM_EXT_PLL1 8
78 #define ATOM_EXT_PLL2 9
79 #define ATOM_EXT_CLOCK 10
80 #define ATOM_PPLL_INVALID 0xFF
82 #define ENCODER_REFCLK_SRC_P1PLL 0
83 #define ENCODER_REFCLK_SRC_P2PLL 1
84 #define ENCODER_REFCLK_SRC_DCPLL 2
85 #define ENCODER_REFCLK_SRC_EXTCLK 3
86 #define ENCODER_REFCLK_SRC_INVALID 0xFF
88 #define ATOM_SCALER1 0
89 #define ATOM_SCALER2 1
91 #define ATOM_SCALER_DISABLE 0
92 #define ATOM_SCALER_CENTER 1
93 #define ATOM_SCALER_EXPANSION 2
94 #define ATOM_SCALER_MULTI_EX 3
96 #define ATOM_DISABLE 0
98 #define ATOM_LCD_BLOFF (ATOM_DISABLE+2)
99 #define ATOM_LCD_BLON (ATOM_ENABLE+2)
100 #define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3)
101 #define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
102 #define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
103 #define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
104 #define ATOM_GET_STATUS (ATOM_DISABLE+8)
106 #define ATOM_BLANKING 1
107 #define ATOM_BLANKING_OFF 0
109 #define ATOM_CURSOR1 0
110 #define ATOM_CURSOR2 1
118 #define ATOM_TV_NTSC 1
119 #define ATOM_TV_NTSCJ 2
120 #define ATOM_TV_PAL 3
121 #define ATOM_TV_PALM 4
122 #define ATOM_TV_PALCN 5
123 #define ATOM_TV_PALN 6
124 #define ATOM_TV_PAL60 7
125 #define ATOM_TV_SECAM 8
126 #define ATOM_TV_CV 16
128 #define ATOM_DAC1_PS2 1
129 #define ATOM_DAC1_CV 2
130 #define ATOM_DAC1_NTSC 3
131 #define ATOM_DAC1_PAL 4
133 #define ATOM_DAC2_PS2 ATOM_DAC1_PS2
134 #define ATOM_DAC2_CV ATOM_DAC1_CV
135 #define ATOM_DAC2_NTSC ATOM_DAC1_NTSC
136 #define ATOM_DAC2_PAL ATOM_DAC1_PAL
139 #define ATOM_PM_STANDBY 1
140 #define ATOM_PM_SUSPEND 2
141 #define ATOM_PM_OFF 3
143 /* Bit0:{=0:single, =1:dual},
144 Bit1 {=0:666RGB, =1:888RGB},
146 Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/
148 #define ATOM_PANEL_MISC_DUAL 0x00000001
149 #define ATOM_PANEL_MISC_888RGB 0x00000002
150 #define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C
151 #define ATOM_PANEL_MISC_FPDI 0x00000010
152 #define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2
153 #define ATOM_PANEL_MISC_SPATIAL 0x00000020
154 #define ATOM_PANEL_MISC_TEMPORAL 0x00000040
155 #define ATOM_PANEL_MISC_API_ENABLED 0x00000080
158 #define MEMTYPE_DDR1 "DDR1"
159 #define MEMTYPE_DDR2 "DDR2"
160 #define MEMTYPE_DDR3 "DDR3"
161 #define MEMTYPE_DDR4 "DDR4"
163 #define ASIC_BUS_TYPE_PCI "PCI"
164 #define ASIC_BUS_TYPE_AGP "AGP"
165 #define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS"
167 /* Maximum size of that FireGL flag string */
169 #define ATOM_FIREGL_FLAG_STRING "FGL" //Flag used to enable FireGL Support
170 #define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 //sizeof( ATOM_FIREGL_FLAG_STRING )
172 #define ATOM_FAKE_DESKTOP_STRING "DSK" //Flag used to enable mobile ASIC on Desktop
173 #define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
175 #define ATOM_M54T_FLAG_STRING "M54T" //Flag used to enable M54T Support
176 #define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 //sizeof( ATOM_M54T_FLAG_STRING )
178 #define HW_ASSISTED_I2C_STATUS_FAILURE 2
179 #define HW_ASSISTED_I2C_STATUS_SUCCESS 1
181 #pragma pack(1) /* BIOS data must use byte aligment */
183 /* Define offset to location of ROM header. */
185 #define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
186 #define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L
188 #define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94
189 #define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */
190 #define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f
191 #define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e
193 /* Common header for all ROM Data tables.
194 Every table pointed _ATOM_MASTER_DATA_TABLE has this common header.
195 And the pointer actually points to this header. */
197 typedef struct _ATOM_COMMON_TABLE_HEADER
199 USHORT usStructureSize;
200 UCHAR ucTableFormatRevision; /*Change it when the Parser is not backward compatible */
201 UCHAR ucTableContentRevision; /*Change it only when the table needs to change but the firmware */
202 /*Image can't be updated, while Driver needs to carry the new table! */
203 }ATOM_COMMON_TABLE_HEADER;
205 /****************************************************************************/
206 // Structure stores the ROM header.
207 /****************************************************************************/
208 typedef struct _ATOM_ROM_HEADER
210 ATOM_COMMON_TABLE_HEADER sHeader;
211 UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios,
212 atombios should init it as "ATOM", don't change the position */
213 USHORT usBiosRuntimeSegmentAddress;
214 USHORT usProtectedModeInfoOffset;
215 USHORT usConfigFilenameOffset;
216 USHORT usCRC_BlockOffset;
217 USHORT usBIOS_BootupMessageOffset;
218 USHORT usInt10Offset;
219 USHORT usPciBusDevInitCode;
220 USHORT usIoBaseAddress;
221 USHORT usSubsystemVendorID;
222 USHORT usSubsystemID;
223 USHORT usPCI_InfoOffset;
224 USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */
225 USHORT usMasterDataTableOffset; /*Offset for SW to get all data table offsets, Don't change the position */
226 UCHAR ucExtendedFunctionCode;
230 /*==============================Command Table Portion==================================== */
237 /****************************************************************************/
238 // Structures used in Command.mtb
239 /****************************************************************************/
240 typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
241 USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1
242 USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON
243 USHORT ASIC_RegistersInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
244 USHORT VRAM_BlockVenderDetection; //Atomic Table, used only by Bios
245 USHORT DIGxEncoderControl; //Only used by Bios
246 USHORT MemoryControllerInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
247 USHORT EnableCRTCMemReq; //Function Table,directly used by various SW components,latest version 2.1
248 USHORT MemoryParamAdjust; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed
249 USHORT DVOEncoderControl; //Function Table,directly used by various SW components,latest version 1.2
250 USHORT GPIOPinControl; //Atomic Table, only used by Bios
251 USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1
252 USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1
253 USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2
254 USHORT DynamicClockGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
255 USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
256 USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
257 USHORT MemoryPLLInit;
258 USHORT AdjustDisplayPll; //only used by Bios
259 USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
260 USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios
261 USHORT ASIC_StaticPwrMgtStatusChange; //Obsolete , only used by Bios
262 USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2
263 USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3
264 USHORT LCD1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
265 USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
266 USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
267 USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
268 USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead
269 USHORT GetConditionalGoldenSetting; //only used by Bios
270 USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1
271 USHORT TMDSAEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3
272 USHORT LVDSEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3
273 USHORT TV1OutputControl; //Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead
274 USHORT EnableScaler; //Atomic Table, used only by Bios
275 USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
276 USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
277 USHORT GetPixelClock; //Atomic Table, directly used by various SW components,latest version 1.1
278 USHORT EnableVGA_Render; //Function Table,directly used by various SW components,latest version 1.1
279 USHORT GetSCLKOverMCLKRatio; //Atomic Table, only used by Bios
280 USHORT SetCRTC_Timing; //Atomic Table, directly used by various SW components,latest version 1.1
281 USHORT SetCRTC_OverScan; //Atomic Table, used by various SW components,latest version 1.1
282 USHORT SetCRTC_Replication; //Atomic Table, used only by Bios
283 USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1
284 USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios
285 USHORT UpdateCRTC_DoubleBufferRegisters;
286 USHORT LUT_AutoFill; //Atomic Table, only used by Bios
287 USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios
288 USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1
289 USHORT GetEngineClock; //Atomic Table, directly used by various SW components,latest version 1.1
290 USHORT SetCRTC_UsingDTDTiming; //Atomic Table, directly used by various SW components,latest version 1.1
291 USHORT ExternalEncoderControl; //Atomic Table, directly used by various SW components,latest version 2.1
292 USHORT LVTMAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
293 USHORT VRAM_BlockDetectionByStrap; //Atomic Table, used only by Bios
294 USHORT MemoryCleanUp; //Atomic Table, only used by Bios
295 USHORT ProcessI2cChannelTransaction; //Function Table,only used by Bios
296 USHORT WriteOneByteToHWAssistedI2C; //Function Table,indirectly used by various SW components
297 USHORT ReadHWAssistedI2CStatus; //Atomic Table, indirectly used by various SW components
298 USHORT SpeedFanControl; //Function Table,indirectly used by various SW components,called from ASIC_Init
299 USHORT PowerConnectorDetection; //Atomic Table, directly used by various SW components,latest version 1.1
300 USHORT MC_Synchronization; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
301 USHORT ComputeMemoryEnginePLL; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock
302 USHORT MemoryRefreshConversion; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock
303 USHORT VRAM_GetCurrentInfoBlock; //Atomic Table, used only by Bios
304 USHORT DynamicMemorySettings; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
305 USHORT MemoryTraining; //Atomic Table, used only by Bios
306 USHORT EnableSpreadSpectrumOnPPLL; //Atomic Table, directly used by various SW components,latest version 1.2
307 USHORT TMDSAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
308 USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
309 USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
310 USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
311 USHORT SetupHWAssistedI2CStatus; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
312 USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
313 USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
314 USHORT EnableYUV; //Atomic Table, indirectly used by various SW components,called from EnableVGARender
315 USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
316 USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
317 USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
318 USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
319 USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios
320 USHORT DPEncoderService; //Function Table,only used by Bios
321 }ATOM_MASTER_LIST_OF_COMMAND_TABLES;
323 // For backward compatible
324 #define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
325 #define UNIPHYTransmitterControl DIG1TransmitterControl
326 #define LVTMATransmitterControl DIG2TransmitterControl
327 #define SetCRTC_DPM_State GetConditionalGoldenSetting
328 #define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
329 #define HPDInterruptService ReadHWAssistedI2CStatus
330 #define EnableVGA_Access GetSCLKOverMCLKRatio
331 #define GetDispObjectInfo EnableYUV
333 typedef struct _ATOM_MASTER_COMMAND_TABLE
335 ATOM_COMMON_TABLE_HEADER sHeader;
336 ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
337 }ATOM_MASTER_COMMAND_TABLE;
339 /****************************************************************************/
340 // Structures used in every command table
341 /****************************************************************************/
342 typedef struct _ATOM_TABLE_ATTRIBUTE
345 USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag
346 USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
347 USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
349 USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
350 USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
351 USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag
353 }ATOM_TABLE_ATTRIBUTE;
355 typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS
357 ATOM_TABLE_ATTRIBUTE sbfAccess;
359 }ATOM_TABLE_ATTRIBUTE_ACCESS;
361 /****************************************************************************/
362 // Common header for all command tables.
363 // Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header.
364 // And the pointer actually points to this header.
365 /****************************************************************************/
366 typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
368 ATOM_COMMON_TABLE_HEADER CommonHeader;
369 ATOM_TABLE_ATTRIBUTE TableAttribute;
370 }ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
372 /****************************************************************************/
373 // Structures used by ComputeMemoryEnginePLLTable
374 /****************************************************************************/
375 #define COMPUTE_MEMORY_PLL_PARAM 1
376 #define COMPUTE_ENGINE_PLL_PARAM 2
377 #define ADJUST_MC_SETTING_PARAM 3
379 /****************************************************************************/
380 // Structures used by AdjustMemoryControllerTable
381 /****************************************************************************/
382 typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ
385 ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
386 ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0]
387 ULONG ulClockFreq:24;
389 ULONG ulClockFreq:24;
390 ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0]
391 ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
393 }ATOM_ADJUST_MEMORY_CLOCK_FREQ;
394 #define POINTER_RETURN_FLAG 0x80
396 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
398 ULONG ulClock; //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div
399 UCHAR ucAction; //0:reserved //1:Memory //2:Engine
400 UCHAR ucReserved; //may expand to return larger Fbdiv later
401 UCHAR ucFbDiv; //return value
402 UCHAR ucPostDiv; //return value
403 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
405 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2
407 ULONG ulClock; //When return, [23:0] return real clock
408 UCHAR ucAction; //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register
409 USHORT usFbDiv; //return Feedback value to be written to register
410 UCHAR ucPostDiv; //return post div to be written to register
411 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
412 #define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
415 #define SET_CLOCK_FREQ_MASK 0x00FFFFFF //Clock change tables only take bit [23:0] as the requested clock value
416 #define USE_NON_BUS_CLOCK_MASK 0x01000000 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
417 #define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
418 #define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
419 #define FIRST_TIME_CHANGE_CLOCK 0x08000000 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
420 #define SKIP_SW_PROGRAM_PLL 0x10000000 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
421 #define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK
423 #define b3USE_NON_BUS_CLOCK_MASK 0x01 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
424 #define b3USE_MEMORY_SELF_REFRESH 0x02 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
425 #define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
426 #define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
427 #define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
429 typedef struct _ATOM_COMPUTE_CLOCK_FREQ
432 ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
433 ULONG ulClockFreq:24; // in unit of 10kHz
435 ULONG ulClockFreq:24; // in unit of 10kHz
436 ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
438 }ATOM_COMPUTE_CLOCK_FREQ;
440 typedef struct _ATOM_S_MPLL_FB_DIVIDER
444 }ATOM_S_MPLL_FB_DIVIDER;
446 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
450 ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
451 ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter
453 UCHAR ucRefDiv; //Output Parameter
454 UCHAR ucPostDiv; //Output Parameter
455 UCHAR ucCntlFlag; //Output Parameter
457 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
460 #define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1
461 #define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2
462 #define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4
463 #define ATOM_PLL_CNTL_FLAG_SPLL_ISPARE_9 8
466 // V4 are only used for APU which PLL outside GPU
467 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
470 ULONG ucPostDiv; //return parameter: post divider which is used to program to register directly
471 ULONG ulClock:24; //Input= target clock, output = actual clock
473 ULONG ulClock:24; //Input= target clock, output = actual clock
474 ULONG ucPostDiv; //return parameter: post divider which is used to program to register directly
476 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
478 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
482 ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
483 ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter
485 UCHAR ucRefDiv; //Output Parameter
486 UCHAR ucPostDiv; //Output Parameter
489 UCHAR ucCntlFlag; //Output Flags
490 UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode
493 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
496 #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode
498 typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
500 ATOM_COMPUTE_CLOCK_FREQ ulClock;
502 }DYNAMICE_MEMORY_SETTINGS_PARAMETER;
504 typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER
506 ATOM_COMPUTE_CLOCK_FREQ ulClock;
509 }DYNAMICE_ENGINE_SETTINGS_PARAMETER;
511 /****************************************************************************/
512 // Structures used by SetEngineClockTable
513 /****************************************************************************/
514 typedef struct _SET_ENGINE_CLOCK_PARAMETERS
516 ULONG ulTargetEngineClock; //In 10Khz unit
517 }SET_ENGINE_CLOCK_PARAMETERS;
519 typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION
521 ULONG ulTargetEngineClock; //In 10Khz unit
522 COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
523 }SET_ENGINE_CLOCK_PS_ALLOCATION;
525 /****************************************************************************/
526 // Structures used by SetMemoryClockTable
527 /****************************************************************************/
528 typedef struct _SET_MEMORY_CLOCK_PARAMETERS
530 ULONG ulTargetMemoryClock; //In 10Khz unit
531 }SET_MEMORY_CLOCK_PARAMETERS;
533 typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION
535 ULONG ulTargetMemoryClock; //In 10Khz unit
536 COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
537 }SET_MEMORY_CLOCK_PS_ALLOCATION;
539 /****************************************************************************/
540 // Structures used by ASIC_Init.ctb
541 /****************************************************************************/
542 typedef struct _ASIC_INIT_PARAMETERS
544 ULONG ulDefaultEngineClock; //In 10Khz unit
545 ULONG ulDefaultMemoryClock; //In 10Khz unit
546 }ASIC_INIT_PARAMETERS;
548 typedef struct _ASIC_INIT_PS_ALLOCATION
550 ASIC_INIT_PARAMETERS sASICInitClocks;
551 SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure
552 }ASIC_INIT_PS_ALLOCATION;
554 /****************************************************************************/
555 // Structure used by DynamicClockGatingTable.ctb
556 /****************************************************************************/
557 typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
559 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
561 }DYNAMIC_CLOCK_GATING_PARAMETERS;
562 #define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
564 /****************************************************************************/
565 // Structure used by EnableASIC_StaticPwrMgtTable.ctb
566 /****************************************************************************/
567 typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
569 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
571 }ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
572 #define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
574 /****************************************************************************/
575 // Structures used by DAC_LoadDetectionTable.ctb
576 /****************************************************************************/
577 typedef struct _DAC_LOAD_DETECTION_PARAMETERS
579 USHORT usDeviceID; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT}
580 UCHAR ucDacType; //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC}
581 UCHAR ucMisc; //Valid only when table revision =1.3 and above
582 }DAC_LOAD_DETECTION_PARAMETERS;
584 // DAC_LOAD_DETECTION_PARAMETERS.ucMisc
585 #define DAC_LOAD_MISC_YPrPb 0x01
587 typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION
589 DAC_LOAD_DETECTION_PARAMETERS sDacload;
590 ULONG Reserved[2];// Don't set this one, allocation for EXT DAC
591 }DAC_LOAD_DETECTION_PS_ALLOCATION;
593 /****************************************************************************/
594 // Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb
595 /****************************************************************************/
596 typedef struct _DAC_ENCODER_CONTROL_PARAMETERS
598 USHORT usPixelClock; // in 10KHz; for bios convenient
599 UCHAR ucDacStandard; // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0)
600 UCHAR ucAction; // 0: turn off encoder
601 // 1: setup and turn on encoder
602 // 7: ATOM_ENCODER_INIT Initialize DAC
603 }DAC_ENCODER_CONTROL_PARAMETERS;
605 #define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS
607 /****************************************************************************/
608 // Structures used by DIG1EncoderControlTable
609 // DIG2EncoderControlTable
610 // ExternalEncoderControlTable
611 /****************************************************************************/
612 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
614 USHORT usPixelClock; // in 10KHz; for bios convenient
617 // =0: PHY linkA if bfLane<3
618 // =1: PHY linkB if bfLanes<3
619 // =0: PHY linkA+B if bfLanes=3
620 // [3] Transmitter Sel
621 // =0: UNIPHY or PCIEPHY
623 UCHAR ucAction; // =0: turn off encoder
624 // =1: turn on encoder
631 UCHAR ucLaneNum; // how many lanes to enable
633 }DIG_ENCODER_CONTROL_PARAMETERS;
634 #define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS
635 #define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS
638 #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
639 #define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
640 #define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
641 #define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ 0x02
642 #define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
643 #define ATOM_ENCODER_CONFIG_LINKA 0x00
644 #define ATOM_ENCODER_CONFIG_LINKB 0x04
645 #define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA
646 #define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB
647 #define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08
648 #define ATOM_ENCODER_CONFIG_UNIPHY 0x00
649 #define ATOM_ENCODER_CONFIG_LVTMA 0x08
650 #define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00
651 #define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08
652 #define ATOM_ENCODER_CONFIG_DIGB 0x80 // VBIOS Internal use, outside SW should set this bit=0
654 // ATOM_ENABLE: Enable Encoder
655 // ATOM_DISABLE: Disable Encoder
658 #define ATOM_ENCODER_MODE_DP 0
659 #define ATOM_ENCODER_MODE_LVDS 1
660 #define ATOM_ENCODER_MODE_DVI 2
661 #define ATOM_ENCODER_MODE_HDMI 3
662 #define ATOM_ENCODER_MODE_SDVO 4
663 #define ATOM_ENCODER_MODE_DP_AUDIO 5
664 #define ATOM_ENCODER_MODE_TV 13
665 #define ATOM_ENCODER_MODE_CV 14
666 #define ATOM_ENCODER_MODE_CRT 15
667 #define ATOM_ENCODER_MODE_DVO 16
668 #define ATOM_ENCODER_MODE_DP_SST ATOM_ENCODER_MODE_DP // For DP1.2
669 #define ATOM_ENCODER_MODE_DP_MST 5 // For DP1.2
671 typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
675 UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
676 UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F
678 UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
680 UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
682 UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F
683 UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
686 }ATOM_DIG_ENCODER_CONFIG_V2;
689 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
691 USHORT usPixelClock; // in 10KHz; for bios convenient
692 ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
700 UCHAR ucLaneNum; // how many lanes to enable
701 UCHAR ucStatus; // = DP_LINK_TRAINING_COMPLETE or DP_LINK_TRAINING_INCOMPLETE, only used by VBIOS with command ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS
703 }DIG_ENCODER_CONTROL_PARAMETERS_V2;
706 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01
707 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00
708 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01
709 #define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04
710 #define ATOM_ENCODER_CONFIG_V2_LINKA 0x00
711 #define ATOM_ENCODER_CONFIG_V2_LINKB 0x04
712 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18
713 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00
714 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08
715 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10
720 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START 0x08
721 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 0x09
722 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 0x0a
723 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 0x13
724 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE 0x0b
725 #define ATOM_ENCODER_CMD_DP_VIDEO_OFF 0x0c
726 #define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d
727 #define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS 0x0e
728 #define ATOM_ENCODER_CMD_SETUP 0x0f
729 #define ATOM_ENCODER_CMD_SETUP_PANEL_MODE 0x10
732 #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10
733 #define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE 0x00
735 //ucTableFormatRevision=1
736 //ucTableContentRevision=3
737 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
738 typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
742 UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
744 UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
746 UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
748 UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
751 }ATOM_DIG_ENCODER_CONFIG_V3;
753 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
754 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00
755 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01
756 #define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL 0x70
757 #define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER 0x00
758 #define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER 0x10
759 #define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER 0x20
760 #define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER 0x30
761 #define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER 0x40
762 #define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER 0x50
764 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
766 USHORT usPixelClock; // in 10KHz; for bios convenient
767 ATOM_DIG_ENCODER_CONFIG_V3 acConfig;
777 UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
780 // =0x11: internal DP1 for NutMeg/Travis DP translator
782 UCHAR ucLaneNum; // how many lanes to enable
783 UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
785 }DIG_ENCODER_CONTROL_PARAMETERS_V3;
787 //ucTableFormatRevision=1
788 //ucTableContentRevision=4
790 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
791 typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
795 UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
797 UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version
799 UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version
801 UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
804 }ATOM_DIG_ENCODER_CONFIG_V4;
806 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK 0x03
807 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00
808 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01
809 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02
810 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70
811 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00
812 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10
813 #define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER 0x20
814 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30
815 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40
816 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50
818 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
820 USHORT usPixelClock; // in 10KHz; for bios convenient
822 ATOM_DIG_ENCODER_CONFIG_V4 acConfig;
834 UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
837 // =0x11: internal DP1 for NutMeg/Travis DP translator
839 UCHAR ucLaneNum; // how many lanes to enable
840 UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
841 UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version
842 }DIG_ENCODER_CONTROL_PARAMETERS_V4;
844 // define ucBitPerColor:
845 #define PANEL_BPC_UNDEFINE 0x00
846 #define PANEL_6BIT_PER_COLOR 0x01
847 #define PANEL_8BIT_PER_COLOR 0x02
848 #define PANEL_10BIT_PER_COLOR 0x03
849 #define PANEL_12BIT_PER_COLOR 0x04
850 #define PANEL_16BIT_PER_COLOR 0x05
853 #define DP_PANEL_MODE_EXTERNAL_DP_MODE 0x00
854 #define DP_PANEL_MODE_INTERNAL_DP2_MODE 0x01
855 #define DP_PANEL_MODE_INTERNAL_DP1_MODE 0x11
857 /****************************************************************************/
858 // Structures used by UNIPHYTransmitterControlTable
859 // LVTMATransmitterControlTable
860 // DVOOutputControlTable
861 /****************************************************************************/
862 typedef struct _ATOM_DP_VS_MODE
868 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS
872 USHORT usPixelClock; // in 10KHz; for bios convenient
873 USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
874 ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
877 // [0]=0: 4 lane Link,
878 // =1: 8 lane Link ( Dual Links TMDS )
879 // [1]=0: InCoherent mode
882 // =0: PHY linkA if bfLane<3
883 // =1: PHY linkB if bfLanes<3
884 // =0: PHY linkA+B if bfLanes=3
885 // [5:4]PCIE lane Sel
886 // =0: lane 0~3 or 0~7
888 // =2: lane 8~11 or 8~15
890 UCHAR ucAction; // =0: turn off encoder
891 // =1: turn on encoder
893 }DIG_TRANSMITTER_CONTROL_PARAMETERS;
895 #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS
898 #define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff
901 #define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01
902 #define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02
903 #define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04
904 #define ATOM_TRANSMITTER_CONFIG_LINKA 0x00
905 #define ATOM_TRANSMITTER_CONFIG_LINKB 0x04
906 #define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00
907 #define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04
909 #define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
910 #define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
911 #define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
913 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30
914 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00
915 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20
916 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30
917 #define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0
918 #define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00
919 #define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00
920 #define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40
921 #define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80
922 #define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80
923 #define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0
926 #define ATOM_TRANSMITTER_ACTION_DISABLE 0
927 #define ATOM_TRANSMITTER_ACTION_ENABLE 1
928 #define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2
929 #define ATOM_TRANSMITTER_ACTION_LCD_BLON 3
930 #define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4
931 #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5
932 #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6
933 #define ATOM_TRANSMITTER_ACTION_INIT 7
934 #define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8
935 #define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9
936 #define ATOM_TRANSMITTER_ACTION_SETUP 10
937 #define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11
938 #define ATOM_TRANSMITTER_ACTION_POWER_ON 12
939 #define ATOM_TRANSMITTER_ACTION_POWER_OFF 13
941 // Following are used for DigTransmitterControlTable ver1.2
942 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2
945 UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
946 // =1 Dig Transmitter 2 ( Uniphy CD )
947 // =2 Dig Transmitter 3 ( Uniphy EF )
949 UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector
950 UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
951 UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
952 // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
954 UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
955 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
957 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
958 UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
959 UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
960 // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
961 UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
962 UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector
964 UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
965 // =1 Dig Transmitter 2 ( Uniphy CD )
966 // =2 Dig Transmitter 3 ( Uniphy EF )
968 }ATOM_DIG_TRANSMITTER_CONFIG_V2;
972 #define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01
975 #define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02
978 #define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04
979 #define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00
980 #define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04
983 #define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08
984 #define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
985 #define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
988 #define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10
991 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0
992 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB
993 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD
994 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF
996 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2
1000 USHORT usPixelClock; // in 10KHz; for bios convenient
1001 USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1002 ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1004 ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
1005 UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
1006 UCHAR ucReserved[4];
1007 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
1009 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3
1012 UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1013 // =1 Dig Transmitter 2 ( Uniphy CD )
1014 // =2 Dig Transmitter 3 ( Uniphy EF )
1015 UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
1016 UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1017 UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1018 // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1019 UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1020 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1022 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1023 UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1024 UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1025 // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1026 UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1027 UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
1028 UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1029 // =1 Dig Transmitter 2 ( Uniphy CD )
1030 // =2 Dig Transmitter 3 ( Uniphy EF )
1032 }ATOM_DIG_TRANSMITTER_CONFIG_V3;
1035 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
1039 USHORT usPixelClock; // in 10KHz; for bios convenient
1040 USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1041 ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1043 ATOM_DIG_TRANSMITTER_CONFIG_V3 acConfig;
1044 UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
1046 UCHAR ucReserved[3];
1047 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V3;
1051 #define ATOM_TRANSMITTER_CONFIG_V3_DUAL_LINK_CONNECTOR 0x01
1054 #define ATOM_TRANSMITTER_CONFIG_V3_COHERENT 0x02
1057 #define ATOM_TRANSMITTER_CONFIG_V3_LINK_SEL_MASK 0x04
1058 #define ATOM_TRANSMITTER_CONFIG_V3_LINKA 0x00
1059 #define ATOM_TRANSMITTER_CONFIG_V3_LINKB 0x04
1062 #define ATOM_TRANSMITTER_CONFIG_V3_ENCODER_SEL_MASK 0x08
1063 #define ATOM_TRANSMITTER_CONFIG_V3_DIG1_ENCODER 0x00
1064 #define ATOM_TRANSMITTER_CONFIG_V3_DIG2_ENCODER 0x08
1067 #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SEL_MASK 0x30
1068 #define ATOM_TRASMITTER_CONFIG_V3_P1PLL 0x00
1069 #define ATOM_TRASMITTER_CONFIG_V3_P2PLL 0x10
1070 #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SRC_EXT 0x20
1073 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER_SEL_MASK 0xC0
1074 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER1 0x00 //AB
1075 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2 0x40 //CD
1076 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3 0x80 //EF
1079 /****************************************************************************/
1080 // Structures used by UNIPHYTransmitterControlTable V1.4
1081 // ASIC Families: NI
1082 // ucTableFormatRevision=1
1083 // ucTableContentRevision=4
1084 /****************************************************************************/
1085 typedef struct _ATOM_DP_VS_MODE_V4
1093 UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4
1094 UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
1095 UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level
1097 UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level
1098 UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
1099 UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4
1103 }ATOM_DP_VS_MODE_V4;
1105 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4
1108 UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1109 // =1 Dig Transmitter 2 ( Uniphy CD )
1110 // =2 Dig Transmitter 3 ( Uniphy EF )
1111 UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New
1112 UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1113 UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1114 // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1115 UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1116 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1118 UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
1119 UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1120 UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1121 // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1122 UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1123 UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New
1124 UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1125 // =1 Dig Transmitter 2 ( Uniphy CD )
1126 // =2 Dig Transmitter 3 ( Uniphy EF )
1128 }ATOM_DIG_TRANSMITTER_CONFIG_V4;
1130 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
1134 USHORT usPixelClock; // in 10KHz; for bios convenient
1135 USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1136 ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode Redefined comparing to previous version
1140 ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig;
1143 UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
1145 UCHAR ucReserved[3];
1146 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V4;
1150 #define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR 0x01
1152 #define ATOM_TRANSMITTER_CONFIG_V4_COHERENT 0x02
1154 #define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK 0x04
1155 #define ATOM_TRANSMITTER_CONFIG_V4_LINKA 0x00
1156 #define ATOM_TRANSMITTER_CONFIG_V4_LINKB 0x04
1158 #define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK 0x08
1159 #define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER 0x00
1160 #define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER 0x08
1162 #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 0x30
1163 #define ATOM_TRANSMITTER_CONFIG_V4_P1PLL 0x00
1164 #define ATOM_TRANSMITTER_CONFIG_V4_P2PLL 0x10
1165 #define ATOM_TRANSMITTER_CONFIG_V4_DCPLL 0x20 // New in _V4
1166 #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT 0x30 // Changed comparing to V3
1168 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK 0xC0
1169 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1 0x00 //AB
1170 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2 0x40 //CD
1171 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF
1174 /****************************************************************************/
1175 // Structures used by ExternalEncoderControlTable V1.3
1176 // ASIC Families: Evergreen, Llano, NI
1177 // ucTableFormatRevision=1
1178 // ucTableContentRevision=3
1179 /****************************************************************************/
1181 typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3
1184 USHORT usPixelClock; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
1185 USHORT usConnectorId; // connector id, valid when ucAction = INIT
1187 UCHAR ucConfig; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
1189 UCHAR ucEncoderMode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
1190 UCHAR ucLaneNum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
1191 UCHAR ucBitPerColor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
1193 }EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3;
1196 #define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT 0x00
1197 #define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT 0x01
1198 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT 0x07
1199 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP 0x0f
1200 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10
1201 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11
1202 #define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12
1205 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
1206 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00
1207 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01
1208 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ 0x02
1209 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK 0x70
1210 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 0x00
1211 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 0x10
1212 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 0x20
1214 typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3
1216 EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder;
1217 ULONG ulReserved[2];
1218 }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3;
1221 /****************************************************************************/
1222 // Structures used by DAC1OuputControlTable
1223 // DAC2OuputControlTable
1224 // LVTMAOutputControlTable (Before DEC30)
1225 // TMDSAOutputControlTable (Before DEC30)
1226 /****************************************************************************/
1227 typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1229 UCHAR ucAction; // Possible input:ATOM_ENABLE||ATOMDISABLE
1230 // When the display is LCD, in addition to above:
1231 // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START||
1232 // ATOM_LCD_SELFTEST_STOP
1234 UCHAR aucPadding[3]; // padding to DWORD aligned
1235 }DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
1237 #define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1240 #define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1241 #define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1243 #define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1244 #define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1246 #define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1247 #define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1249 #define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1250 #define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1252 #define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1253 #define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1255 #define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1256 #define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1258 #define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1259 #define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1261 #define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1262 #define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
1263 #define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS
1265 /****************************************************************************/
1266 // Structures used by BlankCRTCTable
1267 /****************************************************************************/
1268 typedef struct _BLANK_CRTC_PARAMETERS
1270 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
1271 UCHAR ucBlanking; // ATOM_BLANKING or ATOM_BLANKINGOFF
1272 USHORT usBlackColorRCr;
1273 USHORT usBlackColorGY;
1274 USHORT usBlackColorBCb;
1275 }BLANK_CRTC_PARAMETERS;
1276 #define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS
1278 /****************************************************************************/
1279 // Structures used by EnableCRTCTable
1280 // EnableCRTCMemReqTable
1281 // UpdateCRTC_DoubleBufferRegistersTable
1282 /****************************************************************************/
1283 typedef struct _ENABLE_CRTC_PARAMETERS
1285 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
1286 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
1288 }ENABLE_CRTC_PARAMETERS;
1289 #define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS
1291 /****************************************************************************/
1292 // Structures used by SetCRTC_OverScanTable
1293 /****************************************************************************/
1294 typedef struct _SET_CRTC_OVERSCAN_PARAMETERS
1296 USHORT usOverscanRight; // right
1297 USHORT usOverscanLeft; // left
1298 USHORT usOverscanBottom; // bottom
1299 USHORT usOverscanTop; // top
1300 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
1302 }SET_CRTC_OVERSCAN_PARAMETERS;
1303 #define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS
1305 /****************************************************************************/
1306 // Structures used by SetCRTC_ReplicationTable
1307 /****************************************************************************/
1308 typedef struct _SET_CRTC_REPLICATION_PARAMETERS
1310 UCHAR ucH_Replication; // horizontal replication
1311 UCHAR ucV_Replication; // vertical replication
1312 UCHAR usCRTC; // ATOM_CRTC1 or ATOM_CRTC2
1314 }SET_CRTC_REPLICATION_PARAMETERS;
1315 #define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS
1317 /****************************************************************************/
1318 // Structures used by SelectCRTC_SourceTable
1319 /****************************************************************************/
1320 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS
1322 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
1323 UCHAR ucDevice; // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|....
1325 }SELECT_CRTC_SOURCE_PARAMETERS;
1326 #define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS
1328 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2
1330 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
1331 UCHAR ucEncoderID; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
1332 UCHAR ucEncodeMode; // Encoding mode, only valid when using DIG1/DIG2/DVO
1334 }SELECT_CRTC_SOURCE_PARAMETERS_V2;
1337 //#define ASIC_INT_DAC1_ENCODER_ID 0x00
1338 //#define ASIC_INT_TV_ENCODER_ID 0x02
1339 //#define ASIC_INT_DIG1_ENCODER_ID 0x03
1340 //#define ASIC_INT_DAC2_ENCODER_ID 0x04
1341 //#define ASIC_EXT_TV_ENCODER_ID 0x06
1342 //#define ASIC_INT_DVO_ENCODER_ID 0x07
1343 //#define ASIC_INT_DIG2_ENCODER_ID 0x09
1344 //#define ASIC_EXT_DIG_ENCODER_ID 0x05
1347 //#define ATOM_ENCODER_MODE_DP 0
1348 //#define ATOM_ENCODER_MODE_LVDS 1
1349 //#define ATOM_ENCODER_MODE_DVI 2
1350 //#define ATOM_ENCODER_MODE_HDMI 3
1351 //#define ATOM_ENCODER_MODE_SDVO 4
1352 //#define ATOM_ENCODER_MODE_TV 13
1353 //#define ATOM_ENCODER_MODE_CV 14
1354 //#define ATOM_ENCODER_MODE_CRT 15
1356 /****************************************************************************/
1357 // Structures used by SetPixelClockTable
1358 // GetPixelClockTable
1359 /****************************************************************************/
1360 //Major revision=1., Minor revision=1
1361 typedef struct _PIXEL_CLOCK_PARAMETERS
1363 USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1364 // 0 means disable PPLL
1365 USHORT usRefDiv; // Reference divider
1366 USHORT usFbDiv; // feedback divider
1367 UCHAR ucPostDiv; // post divider
1368 UCHAR ucFracFbDiv; // fractional feedback divider
1369 UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
1370 UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER
1371 UCHAR ucCRTC; // Which CRTC uses this Ppll
1373 }PIXEL_CLOCK_PARAMETERS;
1375 //Major revision=1., Minor revision=2, add ucMiscIfno
1377 #define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
1378 #define MISC_DEVICE_INDEX_MASK 0xF0
1379 #define MISC_DEVICE_INDEX_SHIFT 4
1381 typedef struct _PIXEL_CLOCK_PARAMETERS_V2
1383 USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1384 // 0 means disable PPLL
1385 USHORT usRefDiv; // Reference divider
1386 USHORT usFbDiv; // feedback divider
1387 UCHAR ucPostDiv; // post divider
1388 UCHAR ucFracFbDiv; // fractional feedback divider
1389 UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
1390 UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER
1391 UCHAR ucCRTC; // Which CRTC uses this Ppll
1392 UCHAR ucMiscInfo; // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog
1393 }PIXEL_CLOCK_PARAMETERS_V2;
1395 //Major revision=1., Minor revision=3, structure/definition change
1397 //ATOM_ENCODER_MODE_DP
1398 //ATOM_ENOCDER_MODE_LVDS
1399 //ATOM_ENOCDER_MODE_DVI
1400 //ATOM_ENOCDER_MODE_HDMI
1401 //ATOM_ENOCDER_MODE_SDVO
1402 //ATOM_ENCODER_MODE_TV 13
1403 //ATOM_ENCODER_MODE_CV 14
1404 //ATOM_ENCODER_MODE_CRT 15
1407 //#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
1408 //#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
1409 //#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
1410 //#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
1411 //#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
1412 //#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
1413 //#define DVO_ENCODER_CONFIG_24BIT 0x08
1415 //ucMiscInfo: also changed, see below
1416 #define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01
1417 #define PIXEL_CLOCK_MISC_VGA_MODE 0x02
1418 #define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04
1419 #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00
1420 #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04
1421 #define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08
1422 #define PIXEL_CLOCK_MISC_REF_DIV_SRC 0x10
1423 // V1.4 for RoadRunner
1424 #define PIXEL_CLOCK_V4_MISC_SS_ENABLE 0x10
1425 #define PIXEL_CLOCK_V4_MISC_COHERENT_MODE 0x20
1428 typedef struct _PIXEL_CLOCK_PARAMETERS_V3
1430 USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1431 // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0.
1432 USHORT usRefDiv; // Reference divider
1433 USHORT usFbDiv; // feedback divider
1434 UCHAR ucPostDiv; // post divider
1435 UCHAR ucFracFbDiv; // fractional feedback divider
1436 UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
1437 UCHAR ucTransmitterId; // graphic encoder id defined in objectId.h
1440 UCHAR ucEncoderMode; // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/
1441 UCHAR ucDVOConfig; // when use DVO, need to know SDR/DDR, 12bit or 24bit
1443 UCHAR ucMiscInfo; // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel
1444 // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source
1445 // bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the source of reference divider
1446 }PIXEL_CLOCK_PARAMETERS_V3;
1448 #define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2
1449 #define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST
1451 typedef struct _PIXEL_CLOCK_PARAMETERS_V5
1453 UCHAR ucCRTC; // ATOM_CRTC1~6, indicate the CRTC controller to
1454 // drive the pixel clock. not used for DCPLL case.
1457 UCHAR ucFracFbDiv; // [gphan] temporary to prevent build problem. remove it after driver code is changed.
1459 USHORT usPixelClock; // target the pixel clock to drive the CRTC timing
1460 // 0 means disable PPLL/DCPLL.
1461 USHORT usFbDiv; // feedback divider integer part.
1462 UCHAR ucPostDiv; // post divider.
1463 UCHAR ucRefDiv; // Reference divider
1464 UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
1465 UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h,
1466 // indicate which graphic encoder will be used.
1467 UCHAR ucEncoderMode; // Encoder mode:
1468 UCHAR ucMiscInfo; // bit[0]= Force program PPLL
1469 // bit[1]= when VGA timing is used.
1470 // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
1471 // bit[4]= RefClock source for PPLL.
1472 // =0: XTLAIN( default mode )
1473 // =1: other external clock source, which is pre-defined
1474 // by VBIOS depend on the feature required.
1475 // bit[7:5]: reserved.
1476 ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
1478 }PIXEL_CLOCK_PARAMETERS_V5;
1480 #define PIXEL_CLOCK_V5_MISC_FORCE_PROG_PPLL 0x01
1481 #define PIXEL_CLOCK_V5_MISC_VGA_MODE 0x02
1482 #define PIXEL_CLOCK_V5_MISC_HDMI_BPP_MASK 0x0c
1483 #define PIXEL_CLOCK_V5_MISC_HDMI_24BPP 0x00
1484 #define PIXEL_CLOCK_V5_MISC_HDMI_30BPP 0x04
1485 #define PIXEL_CLOCK_V5_MISC_HDMI_32BPP 0x08
1486 #define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC 0x10
1488 typedef struct _CRTC_PIXEL_CLOCK_FREQ
1491 ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to
1492 // drive the pixel clock. not used for DCPLL case.
1493 ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing.
1494 // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
1496 ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing.
1497 // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
1498 ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to
1499 // drive the pixel clock. not used for DCPLL case.
1501 }CRTC_PIXEL_CLOCK_FREQ;
1503 typedef struct _PIXEL_CLOCK_PARAMETERS_V6
1506 CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq; // pixel clock and CRTC id frequency
1507 ULONG ulDispEngClkFreq; // dispclk frequency
1509 USHORT usFbDiv; // feedback divider integer part.
1510 UCHAR ucPostDiv; // post divider.
1511 UCHAR ucRefDiv; // Reference divider
1512 UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
1513 UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h,
1514 // indicate which graphic encoder will be used.
1515 UCHAR ucEncoderMode; // Encoder mode:
1516 UCHAR ucMiscInfo; // bit[0]= Force program PPLL
1517 // bit[1]= when VGA timing is used.
1518 // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
1519 // bit[4]= RefClock source for PPLL.
1520 // =0: XTLAIN( default mode )
1521 // =1: other external clock source, which is pre-defined
1522 // by VBIOS depend on the feature required.
1523 // bit[7:5]: reserved.
1524 ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
1526 }PIXEL_CLOCK_PARAMETERS_V6;
1528 #define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL 0x01
1529 #define PIXEL_CLOCK_V6_MISC_VGA_MODE 0x02
1530 #define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c
1531 #define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00
1532 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04
1533 #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08
1534 #define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c
1535 #define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10
1537 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
1539 PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput;
1540 }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2;
1542 typedef struct _GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2
1545 UCHAR ucRefDivSrc; // =1: reference clock source from XTALIN, =0: source from PCIE ref clock
1546 UCHAR ucReserved[2];
1547 }GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2;
1549 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3
1551 PIXEL_CLOCK_PARAMETERS_V5 sDispClkInput;
1552 }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3;
1554 /****************************************************************************/
1555 // Structures used by AdjustDisplayPllTable
1556 /****************************************************************************/
1557 typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
1559 USHORT usPixelClock;
1560 UCHAR ucTransmitterID;
1564 UCHAR ucDVOConfig; //if DVO, need passing link rate and output 12bitlow or 24bit
1565 UCHAR ucConfig; //if none DVO, not defined yet
1567 UCHAR ucReserved[3];
1568 }ADJUST_DISPLAY_PLL_PARAMETERS;
1570 #define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10
1571 #define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS
1573 typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3
1575 USHORT usPixelClock; // target pixel clock
1576 UCHAR ucTransmitterID; // GPU transmitter id defined in objectid.h
1577 UCHAR ucEncodeMode; // encoder mode: CRT, LVDS, DP, TMDS or HDMI
1578 UCHAR ucDispPllConfig; // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX
1579 UCHAR ucExtTransmitterID; // external encoder id.
1580 UCHAR ucReserved[2];
1581 }ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3;
1583 // usDispPllConfig v1.2 for RoadRunner
1584 #define DISPPLL_CONFIG_DVO_RATE_SEL 0x0001 // need only when ucTransmitterID = DVO
1585 #define DISPPLL_CONFIG_DVO_DDR_SPEED 0x0000 // need only when ucTransmitterID = DVO
1586 #define DISPPLL_CONFIG_DVO_SDR_SPEED 0x0001 // need only when ucTransmitterID = DVO
1587 #define DISPPLL_CONFIG_DVO_OUTPUT_SEL 0x000c // need only when ucTransmitterID = DVO
1588 #define DISPPLL_CONFIG_DVO_LOW12BIT 0x0000 // need only when ucTransmitterID = DVO
1589 #define DISPPLL_CONFIG_DVO_UPPER12BIT 0x0004 // need only when ucTransmitterID = DVO
1590 #define DISPPLL_CONFIG_DVO_24BIT 0x0008 // need only when ucTransmitterID = DVO
1591 #define DISPPLL_CONFIG_SS_ENABLE 0x0010 // Only used when ucEncoderMode = DP or LVDS
1592 #define DISPPLL_CONFIG_COHERENT_MODE 0x0020 // Only used when ucEncoderMode = TMDS or HDMI
1593 #define DISPPLL_CONFIG_DUAL_LINK 0x0040 // Only used when ucEncoderMode = TMDS or LVDS
1596 typedef struct _ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3
1598 ULONG ulDispPllFreq; // return display PPLL freq which is used to generate the pixclock, and related idclk, symclk etc
1599 UCHAR ucRefDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider and post_div ( if it is not given )
1600 UCHAR ucPostDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider
1601 UCHAR ucReserved[2];
1602 }ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3;
1604 typedef struct _ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3
1608 ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 sInput;
1609 ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 sOutput;
1611 } ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3;
1613 /****************************************************************************/
1614 // Structures used by EnableYUVTable
1615 /****************************************************************************/
1616 typedef struct _ENABLE_YUV_PARAMETERS
1618 UCHAR ucEnable; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB)
1619 UCHAR ucCRTC; // Which CRTC needs this YUV or RGB format
1621 }ENABLE_YUV_PARAMETERS;
1622 #define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
1624 /****************************************************************************/
1625 // Structures used by GetMemoryClockTable
1626 /****************************************************************************/
1627 typedef struct _GET_MEMORY_CLOCK_PARAMETERS
1629 ULONG ulReturnMemoryClock; // current memory speed in 10KHz unit
1630 } GET_MEMORY_CLOCK_PARAMETERS;
1631 #define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS
1633 /****************************************************************************/
1634 // Structures used by GetEngineClockTable
1635 /****************************************************************************/
1636 typedef struct _GET_ENGINE_CLOCK_PARAMETERS
1638 ULONG ulReturnEngineClock; // current engine speed in 10KHz unit
1639 } GET_ENGINE_CLOCK_PARAMETERS;
1640 #define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS
1642 /****************************************************************************/
1643 // Following Structures and constant may be obsolete
1644 /****************************************************************************/
1645 //Maxium 8 bytes,the data read in will be placed in the parameter space.
1646 //Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
1647 typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
1649 USHORT usPrescale; //Ratio between Engine clock and I2C clock
1650 USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID
1651 USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status
1652 //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
1653 UCHAR ucSlaveAddr; //Read from which slave
1654 UCHAR ucLineNumber; //Read from which HW assisted line
1655 }READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
1656 #define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
1659 #define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0
1660 #define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1
1661 #define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2
1662 #define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3
1663 #define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4
1665 typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
1667 USHORT usPrescale; //Ratio between Engine clock and I2C clock
1668 USHORT usByteOffset; //Write to which byte
1669 //Upper portion of usByteOffset is Format of data
1674 //blockID+counterID+offsetID
1675 UCHAR ucData; //PS data1
1676 UCHAR ucStatus; //Status byte 1=success, 2=failure, Also is used as PS data2
1677 UCHAR ucSlaveAddr; //Write to which slave
1678 UCHAR ucLineNumber; //Write from which HW assisted line
1679 }WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
1681 #define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
1683 typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
1685 USHORT usPrescale; //Ratio between Engine clock and I2C clock
1686 UCHAR ucSlaveAddr; //Write to which slave
1687 UCHAR ucLineNumber; //Write from which HW assisted line
1688 }SET_UP_HW_I2C_DATA_PARAMETERS;
1691 /**************************************************************************/
1692 #define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
1695 /****************************************************************************/
1696 // Structures used by PowerConnectorDetectionTable
1697 /****************************************************************************/
1698 typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS
1700 UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected
1701 UCHAR ucPwrBehaviorId;
1702 USHORT usPwrBudget; //how much power currently boot to in unit of watt
1703 }POWER_CONNECTOR_DETECTION_PARAMETERS;
1705 typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION
1707 UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected
1709 USHORT usPwrBudget; //how much power currently boot to in unit of watt
1710 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
1711 }POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
1713 /****************************LVDS SS Command Table Definitions**********************/
1715 /****************************************************************************/
1716 // Structures used by EnableSpreadSpectrumOnPPLLTable
1717 /****************************************************************************/
1718 typedef struct _ENABLE_LVDS_SS_PARAMETERS
1720 USHORT usSpreadSpectrumPercentage;
1721 UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
1722 UCHAR ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY
1723 UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE
1725 }ENABLE_LVDS_SS_PARAMETERS;
1727 //ucTableFormatRevision=1,ucTableContentRevision=2
1728 typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2
1730 USHORT usSpreadSpectrumPercentage;
1731 UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
1732 UCHAR ucSpreadSpectrumStep; //
1733 UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE
1734 UCHAR ucSpreadSpectrumDelay;
1735 UCHAR ucSpreadSpectrumRange;
1737 }ENABLE_LVDS_SS_PARAMETERS_V2;
1739 //This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS.
1740 typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL
1742 USHORT usSpreadSpectrumPercentage;
1743 UCHAR ucSpreadSpectrumType; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
1744 UCHAR ucSpreadSpectrumStep; //
1745 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
1746 UCHAR ucSpreadSpectrumDelay;
1747 UCHAR ucSpreadSpectrumRange;
1748 UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2
1749 }ENABLE_SPREAD_SPECTRUM_ON_PPLL;
1751 typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
1753 USHORT usSpreadSpectrumPercentage;
1754 UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
1755 // Bit[1]: 1-Ext. 0-Int.
1756 // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
1757 // Bits[7:4] reserved
1758 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
1759 USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
1760 USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC
1761 }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2;
1763 #define ATOM_PPLL_SS_TYPE_V2_DOWN_SPREAD 0x00
1764 #define ATOM_PPLL_SS_TYPE_V2_CENTRE_SPREAD 0x01
1765 #define ATOM_PPLL_SS_TYPE_V2_EXT_SPREAD 0x02
1766 #define ATOM_PPLL_SS_TYPE_V2_PPLL_SEL_MASK 0x0c
1767 #define ATOM_PPLL_SS_TYPE_V2_P1PLL 0x00
1768 #define ATOM_PPLL_SS_TYPE_V2_P2PLL 0x04
1769 #define ATOM_PPLL_SS_TYPE_V2_DCPLL 0x08
1770 #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_MASK 0x00FF
1771 #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_SHIFT 0
1772 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK 0x0F00
1773 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT 8
1776 typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3
1778 USHORT usSpreadSpectrumAmountFrac; // SS_AMOUNT_DSFRAC New in DCE5.0
1779 UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
1780 // Bit[1]: 1-Ext. 0-Int.
1781 // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
1782 // Bits[7:4] reserved
1783 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
1784 USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
1785 USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC
1786 }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3;
1788 #define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD 0x00
1789 #define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD 0x01
1790 #define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD 0x02
1791 #define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK 0x0c
1792 #define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00
1793 #define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04
1794 #define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08
1795 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF
1796 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0
1797 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00
1798 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT 8
1800 #define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
1802 /**************************************************************************/
1804 typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION
1806 PIXEL_CLOCK_PARAMETERS sPCLKInput;
1807 ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion
1808 }SET_PIXEL_CLOCK_PS_ALLOCATION;
1810 #define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION
1812 /****************************************************************************/
1813 // Structures used by ###
1814 /****************************************************************************/
1815 typedef struct _MEMORY_TRAINING_PARAMETERS
1817 ULONG ulTargetMemoryClock; //In 10Khz unit
1818 }MEMORY_TRAINING_PARAMETERS;
1819 #define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
1822 /****************************LVDS and other encoder command table definitions **********************/
1825 /****************************************************************************/
1826 // Structures used by LVDSEncoderControlTable (Before DCE30)
1827 // LVTMAEncoderControlTable (Before DCE30)
1828 // TMDSAEncoderControlTable (Before DCE30)
1829 /****************************************************************************/
1830 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS
1832 USHORT usPixelClock; // in 10KHz; for bios convenient
1833 UCHAR ucMisc; // bit0=0: Enable single link
1834 // =1: Enable dual link
1837 UCHAR ucAction; // 0: turn off encoder
1838 // 1: setup and turn on encoder
1839 }LVDS_ENCODER_CONTROL_PARAMETERS;
1841 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS
1843 #define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS
1844 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
1846 #define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS
1847 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
1850 //ucTableFormatRevision=1,ucTableContentRevision=2
1851 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2
1853 USHORT usPixelClock; // in 10KHz; for bios convenient
1854 UCHAR ucMisc; // see PANEL_ENCODER_MISC_xx defintions below
1855 UCHAR ucAction; // 0: turn off encoder
1856 // 1: setup and turn on encoder
1857 UCHAR ucTruncate; // bit0=0: Disable truncate
1858 // =1: Enable truncate
1861 UCHAR ucSpatial; // bit0=0: Disable spatial dithering
1862 // =1: Enable spatial dithering
1865 UCHAR ucTemporal; // bit0=0: Disable temporal dithering
1866 // =1: Enable temporal dithering
1869 // bit5=0: Gray level 2
1871 UCHAR ucFRC; // bit4=0: 25FRC_SEL pattern E
1872 // =1: 25FRC_SEL pattern F
1873 // bit6:5=0: 50FRC_SEL pattern A
1874 // =1: 50FRC_SEL pattern B
1875 // =2: 50FRC_SEL pattern C
1876 // =3: 50FRC_SEL pattern D
1877 // bit7=0: 75FRC_SEL pattern E
1878 // =1: 75FRC_SEL pattern F
1879 }LVDS_ENCODER_CONTROL_PARAMETERS_V2;
1881 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
1883 #define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
1884 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
1886 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
1887 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
1889 #define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2
1890 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
1892 #define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
1893 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
1895 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
1896 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
1898 /****************************************************************************/
1899 // Structures used by ###
1900 /****************************************************************************/
1901 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS
1903 UCHAR ucEnable; // Enable or Disable External TMDS encoder
1904 UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB}
1906 }ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
1908 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION
1910 ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder;
1911 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
1912 }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
1914 #define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
1916 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2
1918 ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder;
1919 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
1920 }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
1922 typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION
1924 DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder;
1925 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
1926 }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
1928 /****************************************************************************/
1929 // Structures used by DVOEncoderControlTable
1930 /****************************************************************************/
1931 //ucTableFormatRevision=1,ucTableContentRevision=3
1934 #define DVO_ENCODER_CONFIG_RATE_SEL 0x01
1935 #define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
1936 #define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
1937 #define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
1938 #define DVO_ENCODER_CONFIG_LOW12BIT 0x00
1939 #define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
1940 #define DVO_ENCODER_CONFIG_24BIT 0x08
1942 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
1944 USHORT usPixelClock;
1946 UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
1948 }DVO_ENCODER_CONTROL_PARAMETERS_V3;
1949 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
1951 //ucTableFormatRevision=1
1952 //ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
1953 // bit1=0: non-coherent mode
1954 // =1: coherent mode
1956 //==========================================================================================
1957 //Only change is here next time when changing encoder parameter definitions again!
1958 #define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
1959 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST
1961 #define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
1962 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
1964 #define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
1965 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
1967 #define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS
1968 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION
1970 //==========================================================================================
1971 #define PANEL_ENCODER_MISC_DUAL 0x01
1972 #define PANEL_ENCODER_MISC_COHERENT 0x02
1973 #define PANEL_ENCODER_MISC_TMDS_LINKB 0x04
1974 #define PANEL_ENCODER_MISC_HDMI_TYPE 0x08
1976 #define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE
1977 #define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE
1978 #define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1)
1980 #define PANEL_ENCODER_TRUNCATE_EN 0x01
1981 #define PANEL_ENCODER_TRUNCATE_DEPTH 0x10
1982 #define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01
1983 #define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10
1984 #define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01
1985 #define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10
1986 #define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20
1987 #define PANEL_ENCODER_25FRC_MASK 0x10
1988 #define PANEL_ENCODER_25FRC_E 0x00
1989 #define PANEL_ENCODER_25FRC_F 0x10
1990 #define PANEL_ENCODER_50FRC_MASK 0x60
1991 #define PANEL_ENCODER_50FRC_A 0x00
1992 #define PANEL_ENCODER_50FRC_B 0x20
1993 #define PANEL_ENCODER_50FRC_C 0x40
1994 #define PANEL_ENCODER_50FRC_D 0x60
1995 #define PANEL_ENCODER_75FRC_MASK 0x80
1996 #define PANEL_ENCODER_75FRC_E 0x00
1997 #define PANEL_ENCODER_75FRC_F 0x80
1999 /****************************************************************************/
2000 // Structures used by SetVoltageTable
2001 /****************************************************************************/
2002 #define SET_VOLTAGE_TYPE_ASIC_VDDC 1
2003 #define SET_VOLTAGE_TYPE_ASIC_MVDDC 2
2004 #define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3
2005 #define SET_VOLTAGE_TYPE_ASIC_VDDCI 4
2006 #define SET_VOLTAGE_INIT_MODE 5
2007 #define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic
2009 #define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1
2010 #define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2
2011 #define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
2013 #define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
2014 #define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
2015 #define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
2017 typedef struct _SET_VOLTAGE_PARAMETERS
2019 UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
2020 UCHAR ucVoltageMode; // To set all, to set source A or source B or ...
2021 UCHAR ucVoltageIndex; // An index to tell which voltage level
2023 }SET_VOLTAGE_PARAMETERS;
2025 typedef struct _SET_VOLTAGE_PARAMETERS_V2
2027 UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
2028 UCHAR ucVoltageMode; // Not used, maybe use for state machine for differen power mode
2029 USHORT usVoltageLevel; // real voltage level
2030 }SET_VOLTAGE_PARAMETERS_V2;
2032 typedef struct _SET_VOLTAGE_PS_ALLOCATION
2034 SET_VOLTAGE_PARAMETERS sASICSetVoltage;
2035 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
2036 }SET_VOLTAGE_PS_ALLOCATION;
2038 /****************************************************************************/
2039 // Structures used by TVEncoderControlTable
2040 /****************************************************************************/
2041 typedef struct _TV_ENCODER_CONTROL_PARAMETERS
2043 USHORT usPixelClock; // in 10KHz; for bios convenient
2044 UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..."
2045 UCHAR ucAction; // 0: turn off encoder
2046 // 1: setup and turn on encoder
2047 }TV_ENCODER_CONTROL_PARAMETERS;
2049 typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION
2051 TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
2052 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; // Don't set this one
2053 }TV_ENCODER_CONTROL_PS_ALLOCATION;
2055 //==============================Data Table Portion====================================
2057 /****************************************************************************/
2058 // Structure used in Data.mtb
2059 /****************************************************************************/
2060 typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
2062 USHORT UtilityPipeLine; // Offest for the utility to get parser info,Don't change this position!
2063 USHORT MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios
2064 USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
2065 USHORT StandardVESA_Timing; // Only used by Bios
2066 USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4
2067 USHORT DAC_Info; // Will be obsolete from R600
2068 USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info
2069 USHORT TMDS_Info; // Will be obsolete from R600
2070 USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1
2071 USHORT SupportedDevicesInfo; // Will be obsolete from R600
2072 USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600
2073 USHORT VRAM_UsageByFirmware; // Shared by various SW components,latest version 1.3 will be used from R600
2074 USHORT GPIO_Pin_LUT; // Shared by various SW components,latest version 1.1
2075 USHORT VESA_ToInternalModeLUT; // Only used by Bios
2076 USHORT ComponentVideoInfo; // Shared by various SW components,latest version 2.1 will be used from R600
2077 USHORT PowerPlayInfo; // Shared by various SW components,latest version 2.1,new design from R600
2078 USHORT CompassionateData; // Will be obsolete from R600
2079 USHORT SaveRestoreInfo; // Only used by Bios
2080 USHORT PPLL_SS_Info; // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info
2081 USHORT OemInfo; // Defined and used by external SW, should be obsolete soon
2082 USHORT XTMDS_Info; // Will be obsolete from R600
2083 USHORT MclkSS_Info; // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used
2084 USHORT Object_Header; // Shared by various SW components,latest version 1.1
2085 USHORT IndirectIOAccess; // Only used by Bios,this table position can't change at all!!
2086 USHORT MC_InitParameter; // Only used by command table
2087 USHORT ASIC_VDDC_Info; // Will be obsolete from R600
2088 USHORT ASIC_InternalSS_Info; // New tabel name from R600, used to be called "ASIC_MVDDC_Info"
2089 USHORT TV_VideoMode; // Only used by command table
2090 USHORT VRAM_Info; // Only used by command table, latest version 1.3
2091 USHORT MemoryTrainingInfo; // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1
2092 USHORT IntegratedSystemInfo; // Shared by various SW components
2093 USHORT ASIC_ProfilingInfo; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
2094 USHORT VoltageObjectInfo; // Shared by various SW components, latest version 1.1
2095 USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1
2096 }ATOM_MASTER_LIST_OF_DATA_TABLES;
2098 // For backward compatible
2099 #define LVDS_Info LCD_Info
2101 typedef struct _ATOM_MASTER_DATA_TABLE
2103 ATOM_COMMON_TABLE_HEADER sHeader;
2104 ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
2105 }ATOM_MASTER_DATA_TABLE;
2108 /****************************************************************************/
2109 // Structure used in MultimediaCapabilityInfoTable
2110 /****************************************************************************/
2111 typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO
2113 ATOM_COMMON_TABLE_HEADER sHeader;
2114 ULONG ulSignature; // HW info table signature string "$ATI"
2115 UCHAR ucI2C_Type; // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc)
2116 UCHAR ucTV_OutInfo; // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7)
2117 UCHAR ucVideoPortInfo; // Provides the video port capabilities
2118 UCHAR ucHostPortInfo; // Provides host port configuration information
2119 }ATOM_MULTIMEDIA_CAPABILITY_INFO;
2121 /****************************************************************************/
2122 // Structure used in MultimediaConfigInfoTable
2123 /****************************************************************************/
2124 typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
2126 ATOM_COMMON_TABLE_HEADER sHeader;
2127 ULONG ulSignature; // MM info table signature sting "$MMT"
2128 UCHAR ucTunerInfo; // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5)
2129 UCHAR ucAudioChipInfo; // List the audio chip type (3:0) product type (4) and OEM revision (7:5)
2130 UCHAR ucProductID; // Defines as OEM ID or ATI board ID dependent on product type setting
2131 UCHAR ucMiscInfo1; // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7)
2132 UCHAR ucMiscInfo2; // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6)
2133 UCHAR ucMiscInfo3; // Video Decoder Type (3:0) Video In Standard/Crystal (7:4)
2134 UCHAR ucMiscInfo4; // Video Decoder Host Config (2:0) reserved (7:3)
2135 UCHAR ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2136 UCHAR ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2137 UCHAR ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2138 UCHAR ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2139 UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2140 }ATOM_MULTIMEDIA_CONFIG_INFO;
2143 /****************************************************************************/
2144 // Structures used in FirmwareInfoTable
2145 /****************************************************************************/
2147 // usBIOSCapability Definition:
2148 // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted;
2149 // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported;
2150 // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported;
2152 #define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001
2153 #define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002
2154 #define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004
2155 #define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008 // (valid from v1.1 ~v1.4):=1: memclk SS enable, =0 memclk SS disable.
2156 #define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010 // (valid from v1.1 ~v1.4):=1: engclk SS enable, =0 engclk SS disable.
2157 #define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020
2158 #define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040
2159 #define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080
2160 #define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100
2161 #define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00
2162 #define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
2163 #define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000
2164 #define ATOM_BIOS_INFO_MEMORY_CLOCK_EXT_SS_SUPPORT 0x0008 // (valid from v2.1 ): =1: memclk ss enable with external ss chip
2165 #define ATOM_BIOS_INFO_ENGINE_CLOCK_EXT_SS_SUPPORT 0x0010 // (valid from v2.1 ): =1: engclk ss enable with external ss chip
2169 //Please don't add or expand this bitfield structure below, this one will retire soon.!
2170 typedef struct _ATOM_FIRMWARE_CAPABILITY
2174 USHORT HyperMemory_Size:4;
2175 USHORT HyperMemory_Support:1;
2176 USHORT PPMode_Assigned:1;
2177 USHORT WMI_SUPPORT:1;
2178 USHORT GPUControlsBL:1;
2179 USHORT EngineClockSS_Support:1;
2180 USHORT MemoryClockSS_Support:1;
2181 USHORT ExtendedDesktopSupport:1;
2182 USHORT DualCRTC_Support:1;
2183 USHORT FirmwarePosted:1;
2185 USHORT FirmwarePosted:1;
2186 USHORT DualCRTC_Support:1;
2187 USHORT ExtendedDesktopSupport:1;
2188 USHORT MemoryClockSS_Support:1;
2189 USHORT EngineClockSS_Support:1;
2190 USHORT GPUControlsBL:1;
2191 USHORT WMI_SUPPORT:1;
2192 USHORT PPMode_Assigned:1;
2193 USHORT HyperMemory_Support:1;
2194 USHORT HyperMemory_Size:4;
2197 }ATOM_FIRMWARE_CAPABILITY;
2199 typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
2201 ATOM_FIRMWARE_CAPABILITY sbfAccess;
2203 }ATOM_FIRMWARE_CAPABILITY_ACCESS;
2207 typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
2210 }ATOM_FIRMWARE_CAPABILITY_ACCESS;
2214 typedef struct _ATOM_FIRMWARE_INFO
2216 ATOM_COMMON_TABLE_HEADER sHeader;
2217 ULONG ulFirmwareRevision;
2218 ULONG ulDefaultEngineClock; //In 10Khz unit
2219 ULONG ulDefaultMemoryClock; //In 10Khz unit
2220 ULONG ulDriverTargetEngineClock; //In 10Khz unit
2221 ULONG ulDriverTargetMemoryClock; //In 10Khz unit
2222 ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
2223 ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
2224 ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
2225 ULONG ulASICMaxEngineClock; //In 10Khz unit
2226 ULONG ulASICMaxMemoryClock; //In 10Khz unit
2227 UCHAR ucASICMaxTemperature;
2228 UCHAR ucPadding[3]; //Don't use them
2229 ULONG aulReservedForBIOS[3]; //Don't use them
2230 USHORT usMinEngineClockPLL_Input; //In 10Khz unit
2231 USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
2232 USHORT usMinEngineClockPLL_Output; //In 10Khz unit
2233 USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
2234 USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
2235 USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
2236 USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
2237 USHORT usMinPixelClockPLL_Input; //In 10Khz unit
2238 USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
2239 USHORT usMinPixelClockPLL_Output; //In 10Khz unit, the definitions above can't change!!!
2240 ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2241 USHORT usReferenceClock; //In 10Khz unit
2242 USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
2243 UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
2244 UCHAR ucDesign_ID; //Indicate what is the board design
2245 UCHAR ucMemoryModule_ID; //Indicate what is the board design
2246 }ATOM_FIRMWARE_INFO;
2248 typedef struct _ATOM_FIRMWARE_INFO_V1_2
2250 ATOM_COMMON_TABLE_HEADER sHeader;
2251 ULONG ulFirmwareRevision;
2252 ULONG ulDefaultEngineClock; //In 10Khz unit
2253 ULONG ulDefaultMemoryClock; //In 10Khz unit
2254 ULONG ulDriverTargetEngineClock; //In 10Khz unit
2255 ULONG ulDriverTargetMemoryClock; //In 10Khz unit
2256 ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
2257 ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
2258 ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
2259 ULONG ulASICMaxEngineClock; //In 10Khz unit
2260 ULONG ulASICMaxMemoryClock; //In 10Khz unit
2261 UCHAR ucASICMaxTemperature;
2262 UCHAR ucMinAllowedBL_Level;
2263 UCHAR ucPadding[2]; //Don't use them
2264 ULONG aulReservedForBIOS[2]; //Don't use them
2265 ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
2266 USHORT usMinEngineClockPLL_Input; //In 10Khz unit
2267 USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
2268 USHORT usMinEngineClockPLL_Output; //In 10Khz unit
2269 USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
2270 USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
2271 USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
2272 USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
2273 USHORT usMinPixelClockPLL_Input; //In 10Khz unit
2274 USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
2275 USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2276 ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2277 USHORT usReferenceClock; //In 10Khz unit
2278 USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
2279 UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
2280 UCHAR ucDesign_ID; //Indicate what is the board design
2281 UCHAR ucMemoryModule_ID; //Indicate what is the board design
2282 }ATOM_FIRMWARE_INFO_V1_2;
2284 typedef struct _ATOM_FIRMWARE_INFO_V1_3
2286 ATOM_COMMON_TABLE_HEADER sHeader;
2287 ULONG ulFirmwareRevision;
2288 ULONG ulDefaultEngineClock; //In 10Khz unit
2289 ULONG ulDefaultMemoryClock; //In 10Khz unit
2290 ULONG ulDriverTargetEngineClock; //In 10Khz unit
2291 ULONG ulDriverTargetMemoryClock; //In 10Khz unit
2292 ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
2293 ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
2294 ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
2295 ULONG ulASICMaxEngineClock; //In 10Khz unit
2296 ULONG ulASICMaxMemoryClock; //In 10Khz unit
2297 UCHAR ucASICMaxTemperature;
2298 UCHAR ucMinAllowedBL_Level;
2299 UCHAR ucPadding[2]; //Don't use them
2300 ULONG aulReservedForBIOS; //Don't use them
2301 ULONG ul3DAccelerationEngineClock;//In 10Khz unit
2302 ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
2303 USHORT usMinEngineClockPLL_Input; //In 10Khz unit
2304 USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
2305 USHORT usMinEngineClockPLL_Output; //In 10Khz unit
2306 USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
2307 USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
2308 USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
2309 USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
2310 USHORT usMinPixelClockPLL_Input; //In 10Khz unit
2311 USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
2312 USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2313 ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2314 USHORT usReferenceClock; //In 10Khz unit
2315 USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
2316 UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
2317 UCHAR ucDesign_ID; //Indicate what is the board design
2318 UCHAR ucMemoryModule_ID; //Indicate what is the board design
2319 }ATOM_FIRMWARE_INFO_V1_3;
2321 typedef struct _ATOM_FIRMWARE_INFO_V1_4
2323 ATOM_COMMON_TABLE_HEADER sHeader;
2324 ULONG ulFirmwareRevision;
2325 ULONG ulDefaultEngineClock; //In 10Khz unit
2326 ULONG ulDefaultMemoryClock; //In 10Khz unit
2327 ULONG ulDriverTargetEngineClock; //In 10Khz unit
2328 ULONG ulDriverTargetMemoryClock; //In 10Khz unit
2329 ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
2330 ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
2331 ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
2332 ULONG ulASICMaxEngineClock; //In 10Khz unit
2333 ULONG ulASICMaxMemoryClock; //In 10Khz unit
2334 UCHAR ucASICMaxTemperature;
2335 UCHAR ucMinAllowedBL_Level;
2336 USHORT usBootUpVDDCVoltage; //In MV unit
2337 USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
2338 USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
2339 ULONG ul3DAccelerationEngineClock;//In 10Khz unit
2340 ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
2341 USHORT usMinEngineClockPLL_Input; //In 10Khz unit
2342 USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
2343 USHORT usMinEngineClockPLL_Output; //In 10Khz unit
2344 USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
2345 USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
2346 USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
2347 USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
2348 USHORT usMinPixelClockPLL_Input; //In 10Khz unit
2349 USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
2350 USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2351 ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2352 USHORT usReferenceClock; //In 10Khz unit
2353 USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
2354 UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
2355 UCHAR ucDesign_ID; //Indicate what is the board design
2356 UCHAR ucMemoryModule_ID; //Indicate what is the board design
2357 }ATOM_FIRMWARE_INFO_V1_4;
2359 //the structure below to be used from Cypress
2360 typedef struct _ATOM_FIRMWARE_INFO_V2_1
2362 ATOM_COMMON_TABLE_HEADER sHeader;
2363 ULONG ulFirmwareRevision;
2364 ULONG ulDefaultEngineClock; //In 10Khz unit
2365 ULONG ulDefaultMemoryClock; //In 10Khz unit
2368 ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
2369 ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
2370 ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
2371 ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock
2372 ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit
2373 UCHAR ucReserved1; //Was ucASICMaxTemperature;
2374 UCHAR ucMinAllowedBL_Level;
2375 USHORT usBootUpVDDCVoltage; //In MV unit
2376 USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
2377 USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
2378 ULONG ulReserved4; //Was ulAsicMaximumVoltage
2379 ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
2380 USHORT usMinEngineClockPLL_Input; //In 10Khz unit
2381 USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
2382 USHORT usMinEngineClockPLL_Output; //In 10Khz unit
2383 USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
2384 USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
2385 USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
2386 USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
2387 USHORT usMinPixelClockPLL_Input; //In 10Khz unit
2388 USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
2389 USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2390 ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2391 USHORT usCoreReferenceClock; //In 10Khz unit
2392 USHORT usMemoryReferenceClock; //In 10Khz unit
2393 USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
2394 UCHAR ucMemoryModule_ID; //Indicate what is the board design
2395 UCHAR ucReserved4[3];
2396 }ATOM_FIRMWARE_INFO_V2_1;
2398 //the structure below to be used from NI
2399 //ucTableFormatRevision=2
2400 //ucTableContentRevision=2
2401 typedef struct _ATOM_FIRMWARE_INFO_V2_2
2403 ATOM_COMMON_TABLE_HEADER sHeader;
2404 ULONG ulFirmwareRevision;
2405 ULONG ulDefaultEngineClock; //In 10Khz unit
2406 ULONG ulDefaultMemoryClock; //In 10Khz unit
2407 ULONG ulReserved[2];
2408 ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
2409 ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
2410 ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
2411 ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock ?
2412 ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage.
2413 UCHAR ucReserved3; //Was ucASICMaxTemperature;
2414 UCHAR ucMinAllowedBL_Level;
2415 USHORT usBootUpVDDCVoltage; //In MV unit
2416 USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
2417 USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
2418 ULONG ulReserved4; //Was ulAsicMaximumVoltage
2419 ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
2420 ULONG ulReserved5; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
2421 ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
2422 ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
2423 USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC
2424 USHORT usMinPixelClockPLL_Input; //In 10Khz unit
2425 USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
2426 USHORT usBootUpVDDCIVoltage; //In unit of mv; Was usMinPixelClockPLL_Output;
2427 ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2428 USHORT usCoreReferenceClock; //In 10Khz unit
2429 USHORT usMemoryReferenceClock; //In 10Khz unit
2430 USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
2431 UCHAR ucMemoryModule_ID; //Indicate what is the board design
2432 UCHAR ucReserved9[3];
2433 USHORT usBootUpMVDDCVoltage; //In unit of mv; Was usMinPixelClockPLL_Output;
2434 USHORT usReserved12;
2435 ULONG ulReserved10[3]; // New added comparing to previous version
2436 }ATOM_FIRMWARE_INFO_V2_2;
2438 #define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2
2440 /****************************************************************************/
2441 // Structures used in IntegratedSystemInfoTable
2442 /****************************************************************************/
2443 #define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2
2444 #define IGP_CAP_FLAG_AC_CARD 0x4
2445 #define IGP_CAP_FLAG_SDVO_CARD 0x8
2446 #define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10
2448 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO
2450 ATOM_COMMON_TABLE_HEADER sHeader;
2451 ULONG ulBootUpEngineClock; //in 10kHz unit
2452 ULONG ulBootUpMemoryClock; //in 10kHz unit
2453 ULONG ulMaxSystemMemoryClock; //in 10kHz unit
2454 ULONG ulMinSystemMemoryClock; //in 10kHz unit
2455 UCHAR ucNumberOfCyclesInPeriodHi;
2456 UCHAR ucLCDTimingSel; //=0:not valid.!=0 sel this timing descriptor from LCD EDID.
2458 USHORT usInterNBVoltageLow; //An intermidiate PMW value to set the voltage
2459 USHORT usInterNBVoltageHigh; //Another intermidiate PMW value to set the voltage
2460 ULONG ulReserved[2];
2462 USHORT usFSBClock; //In MHz unit
2463 USHORT usCapabilityFlag; //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable
2464 //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card
2465 //Bit[4]==1: P/2 mode, ==0: P/1 mode
2466 USHORT usPCIENBCfgReg7; //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal
2467 USHORT usK8MemoryClock; //in MHz unit
2468 USHORT usK8SyncStartDelay; //in 0.01 us unit
2469 USHORT usK8DataReturnTime; //in 0.01 us unit
2470 UCHAR ucMaxNBVoltage;
2471 UCHAR ucMinNBVoltage;
2472 UCHAR ucMemoryType; //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved
2473 UCHAR ucNumberOfCyclesInPeriod; //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod
2474 UCHAR ucStartingPWM_HighTime; //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime
2475 UCHAR ucHTLinkWidth; //16 bit vs. 8 bit
2476 UCHAR ucMaxNBVoltageHigh;
2477 UCHAR ucMinNBVoltageHigh;
2478 }ATOM_INTEGRATED_SYSTEM_INFO;
2480 /* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
2481 ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock
2482 For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
2483 ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
2484 For AMD IGP,for now this can be 0
2485 ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
2486 For AMD IGP,for now this can be 0
2488 usFSBClock: For Intel IGP,it's FSB Freq
2489 For AMD IGP,it's HT Link Speed
2491 usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200
2492 usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation
2493 usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation
2496 ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
2497 ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
2499 ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
2500 ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
2502 ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
2503 ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
2506 usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
2507 usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
2512 The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
2513 Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
2514 The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
2516 SW components can access the IGP system infor structure in the same way as before
2520 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
2522 ATOM_COMMON_TABLE_HEADER sHeader;
2523 ULONG ulBootUpEngineClock; //in 10kHz unit
2524 ULONG ulReserved1[2]; //must be 0x0 for the reserved
2525 ULONG ulBootUpUMAClock; //in 10kHz unit
2526 ULONG ulBootUpSidePortClock; //in 10kHz unit
2527 ULONG ulMinSidePortClock; //in 10kHz unit
2528 ULONG ulReserved2[6]; //must be 0x0 for the reserved
2529 ULONG ulSystemConfig; //see explanation below
2530 ULONG ulBootUpReqDisplayVector;
2531 ULONG ulOtherDisplayMisc;
2532 ULONG ulDDISlot1Config;
2533 ULONG ulDDISlot2Config;
2534 UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
2535 UCHAR ucUMAChannelNumber;
2536 UCHAR ucDockingPinBit;
2537 UCHAR ucDockingPinPolarity;
2538 ULONG ulDockingPinCFGInfo;
2540 USHORT usNumberOfCyclesInPeriod;
2541 USHORT usMaxNBVoltage;
2542 USHORT usMinNBVoltage;
2543 USHORT usBootUpNBVoltage;
2544 ULONG ulHTLinkFreq; //in 10Khz
2545 USHORT usMinHTLinkWidth;
2546 USHORT usMaxHTLinkWidth;
2547 USHORT usUMASyncStartDelay;
2548 USHORT usUMADataReturnTime;
2549 USHORT usLinkStatusZeroTime;
2550 USHORT usDACEfuse; //for storing badgap value (for RS880 only)
2551 ULONG ulHighVoltageHTLinkFreq; // in 10Khz
2552 ULONG ulLowVoltageHTLinkFreq; // in 10Khz
2553 USHORT usMaxUpStreamHTLinkWidth;
2554 USHORT usMaxDownStreamHTLinkWidth;
2555 USHORT usMinUpStreamHTLinkWidth;
2556 USHORT usMinDownStreamHTLinkWidth;
2557 USHORT usFirmwareVersion; //0 means FW is not supported. Otherwise it's the FW version loaded by SBIOS and driver should enable FW.
2558 USHORT usFullT0Time; // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us.
2559 ULONG ulReserved3[96]; //must be 0x0
2560 }ATOM_INTEGRATED_SYSTEM_INFO_V2;
2563 ulBootUpEngineClock: Boot-up Engine Clock in 10Khz;
2564 ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
2565 ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
2568 Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
2569 Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
2570 =0: system boots up at driver control state. Power state depends on PowerPlay table.
2571 Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
2572 Bit[3]=1: Only one power state(Performance) will be supported.
2573 =0: Multiple power states supported from PowerPlay table.
2574 Bit[4]=1: CLMC is supported and enabled on current system.
2575 =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
2576 Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
2577 =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
2578 Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
2579 =0: Voltage settings is determined by powerplay table.
2580 Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
2581 =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
2582 Bit[8]=1: CDLF is supported and enabled on current system.
2583 =0: CDLF is not supported or enabled on current system.
2584 Bit[9]=1: DLL Shut Down feature is enabled on current system.
2585 =0: DLL Shut Down feature is not enabled or supported on current system.
2587 ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
2589 ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
2590 [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSupportedStd definition;
2592 ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
2593 [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
2594 [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 4=1 lane 3:0; bit 5=1 lane 7:4; bit 6=1 lane 11:8; bit 7=1 lane 15:12)
2595 When a DDI connector is not "paired" (meaming two connections mutualexclusive on chassis or docking, only one of them can be connected at one time.
2596 in both chassis and docking, SBIOS has to duplicate the same PCIE lane info from chassis to docking or vice versa. For example:
2597 one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connection on chassis, SBIOS has to copy bit 6 to bit 2.
2599 [15:8] - Lane configuration attribute;
2600 [23:16]- Connector type, possible value:
2601 CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
2602 CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
2603 CONNECTOR_OBJECT_ID_HDMI_TYPE_A
2604 CONNECTOR_OBJECT_ID_DISPLAYPORT
2605 CONNECTOR_OBJECT_ID_eDP
2608 ulDDISlot2Config: Same as Slot1.
2609 ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
2610 For IGP, Hypermemory is the only memory type showed in CCC.
2612 ucUMAChannelNumber: how many channels for the UMA;
2614 ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
2615 ucDockingPinBit: which bit in this register to read the pin status;
2616 ucDockingPinPolarity:Polarity of the pin when docked;
2618 ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0
2620 usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
2622 usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
2623 usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
2624 GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
2625 PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
2626 GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
2628 usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
2630 ulHTLinkFreq: Bootup HT link Frequency in 10Khz.
2631 usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
2632 If CDLW enabled, both upstream and downstream width should be the same during bootup.
2633 usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
2634 If CDLW enabled, both upstream and downstream width should be the same during bootup.
2636 usUMASyncStartDelay: Memory access latency, required for watermark calculation
2637 usUMADataReturnTime: Memory access latency, required for watermark calculation
2638 usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
2639 for Griffin or Greyhound. SBIOS needs to convert to actual time by:
2640 if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
2641 if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
2642 if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
2643 if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
2645 ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
2646 This must be less than or equal to ulHTLinkFreq(bootup frequency).
2647 ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
2648 This must be less than or equal to ulHighVoltageHTLinkFreq.
2650 usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
2651 usMaxDownStreamHTLinkWidth: same as above.
2652 usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
2653 usMinDownStreamHTLinkWidth: same as above.
2656 // ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition
2657 #define INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU 0
2658 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN 1
2659 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2
2660 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3
2661 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4
2663 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH // this deff reflects max defined CPU code
2665 #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
2666 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
2667 #define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004
2668 #define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008
2669 #define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010
2670 #define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020
2671 #define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040
2672 #define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080
2673 #define SYSTEM_CONFIG_CDLF_ENABLED 0x00000100
2674 #define SYSTEM_CONFIG_DLL_SHUTDOWN_ENABLED 0x00000200
2676 #define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF
2678 #define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F
2679 #define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0
2680 #define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01
2681 #define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02
2682 #define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04
2683 #define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08
2685 #define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00
2686 #define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100
2687 #define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01
2689 #define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000
2691 // IntegratedSystemInfoTable new Rev is V5 after V2, because of the real rev of V2 is v1.4. This rev is used for RR
2692 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
2694 ATOM_COMMON_TABLE_HEADER sHeader;
2695 ULONG ulBootUpEngineClock; //in 10kHz unit
2696 ULONG ulDentistVCOFreq; //Dentist VCO clock in 10kHz unit, the source of GPU SCLK, LCLK, UCLK and VCLK.
2697 ULONG ulLClockFreq; //GPU Lclk freq in 10kHz unit, have relationship with NCLK in NorthBridge
2698 ULONG ulBootUpUMAClock; //in 10kHz unit
2699 ULONG ulReserved1[8]; //must be 0x0 for the reserved
2700 ULONG ulBootUpReqDisplayVector;
2701 ULONG ulOtherDisplayMisc;
2702 ULONG ulReserved2[4]; //must be 0x0 for the reserved
2703 ULONG ulSystemConfig; //TBD
2704 ULONG ulCPUCapInfo; //TBD
2705 USHORT usMaxNBVoltage; //high NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
2706 USHORT usMinNBVoltage; //low NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
2707 USHORT usBootUpNBVoltage; //boot up NB voltage
2708 UCHAR ucHtcTmpLmt; //bit [22:16] of D24F3x64 Hardware Thermal Control (HTC) Register, may not be needed, TBD
2709 UCHAR ucTjOffset; //bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed, TBD
2710 ULONG ulReserved3[4]; //must be 0x0 for the reserved
2711 ULONG ulDDISlot1Config; //see above ulDDISlot1Config definition
2712 ULONG ulDDISlot2Config;
2713 ULONG ulDDISlot3Config;
2714 ULONG ulDDISlot4Config;
2715 ULONG ulReserved4[4]; //must be 0x0 for the reserved
2716 UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
2717 UCHAR ucUMAChannelNumber;
2719 ULONG ulReserved5[4]; //must be 0x0 for the reserved
2720 ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];//arrays with values for CSR M3 arbiter for default
2721 ULONG ulCSR_M3_ARB_CNTL_UVD[10]; //arrays with values for CSR M3 arbiter for UVD playback
2722 ULONG ulCSR_M3_ARB_CNTL_FS3D[10];//arrays with values for CSR M3 arbiter for Full Screen 3D applications
2723 ULONG ulReserved6[61]; //must be 0x0
2724 }ATOM_INTEGRATED_SYSTEM_INFO_V5;
2726 #define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000
2727 #define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001
2728 #define ATOM_TV_INT_ENCODER1_INDEX 0x00000002
2729 #define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003
2730 #define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004
2731 #define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005
2732 #define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006
2733 #define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007
2734 #define ATOM_CV_INT_ENCODER1_INDEX 0x00000008
2735 #define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009
2736 #define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A
2737 #define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B
2738 #define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C
2739 #define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D
2741 // define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSelTable
2742 #define ASIC_INT_DAC1_ENCODER_ID 0x00
2743 #define ASIC_INT_TV_ENCODER_ID 0x02
2744 #define ASIC_INT_DIG1_ENCODER_ID 0x03
2745 #define ASIC_INT_DAC2_ENCODER_ID 0x04
2746 #define ASIC_EXT_TV_ENCODER_ID 0x06
2747 #define ASIC_INT_DVO_ENCODER_ID 0x07
2748 #define ASIC_INT_DIG2_ENCODER_ID 0x09
2749 #define ASIC_EXT_DIG_ENCODER_ID 0x05
2750 #define ASIC_EXT_DIG2_ENCODER_ID 0x08
2751 #define ASIC_INT_DIG3_ENCODER_ID 0x0a
2752 #define ASIC_INT_DIG4_ENCODER_ID 0x0b
2753 #define ASIC_INT_DIG5_ENCODER_ID 0x0c
2754 #define ASIC_INT_DIG6_ENCODER_ID 0x0d
2756 //define Encoder attribute
2757 #define ATOM_ANALOG_ENCODER 0
2758 #define ATOM_DIGITAL_ENCODER 1
2759 #define ATOM_DP_ENCODER 2
2761 #define ATOM_ENCODER_ENUM_MASK 0x70
2762 #define ATOM_ENCODER_ENUM_ID1 0x00
2763 #define ATOM_ENCODER_ENUM_ID2 0x10
2764 #define ATOM_ENCODER_ENUM_ID3 0x20
2765 #define ATOM_ENCODER_ENUM_ID4 0x30
2766 #define ATOM_ENCODER_ENUM_ID5 0x40
2767 #define ATOM_ENCODER_ENUM_ID6 0x50
2769 #define ATOM_DEVICE_CRT1_INDEX 0x00000000
2770 #define ATOM_DEVICE_LCD1_INDEX 0x00000001
2771 #define ATOM_DEVICE_TV1_INDEX 0x00000002
2772 #define ATOM_DEVICE_DFP1_INDEX 0x00000003
2773 #define ATOM_DEVICE_CRT2_INDEX 0x00000004
2774 #define ATOM_DEVICE_LCD2_INDEX 0x00000005
2775 #define ATOM_DEVICE_DFP6_INDEX 0x00000006
2776 #define ATOM_DEVICE_DFP2_INDEX 0x00000007
2777 #define ATOM_DEVICE_CV_INDEX 0x00000008
2778 #define ATOM_DEVICE_DFP3_INDEX 0x00000009
2779 #define ATOM_DEVICE_DFP4_INDEX 0x0000000A
2780 #define ATOM_DEVICE_DFP5_INDEX 0x0000000B
2782 #define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C
2783 #define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D
2784 #define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E
2785 #define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F
2786 #define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1)
2787 #define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO
2788 #define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 )
2790 #define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1)
2792 #define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX )
2793 #define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX )
2794 #define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX )
2795 #define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX )
2796 #define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX )
2797 #define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX )
2798 #define ATOM_DEVICE_DFP6_SUPPORT (0x1L << ATOM_DEVICE_DFP6_INDEX )
2799 #define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX )
2800 #define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX )
2801 #define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX )
2802 #define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX )
2803 #define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX )
2805 #define ATOM_DEVICE_CRT_SUPPORT (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
2806 #define ATOM_DEVICE_DFP_SUPPORT (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT | ATOM_DEVICE_DFP6_SUPPORT)
2807 #define ATOM_DEVICE_TV_SUPPORT (ATOM_DEVICE_TV1_SUPPORT)
2808 #define ATOM_DEVICE_LCD_SUPPORT (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)
2810 #define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0
2811 #define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004
2812 #define ATOM_DEVICE_CONNECTOR_VGA 0x00000001
2813 #define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002
2814 #define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003
2815 #define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004
2816 #define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005
2817 #define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006
2818 #define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007
2819 #define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008
2820 #define ATOM_DEVICE_CONNECTOR_SCART 0x00000009
2821 #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A
2822 #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B
2823 #define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E
2824 #define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F
2827 #define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F
2828 #define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000
2829 #define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000
2830 #define ATOM_DEVICE_DAC_INFO_DACA 0x00000001
2831 #define ATOM_DEVICE_DAC_INFO_DACB 0x00000002
2832 #define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003
2834 #define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000
2836 #define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F
2837 #define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000
2839 #define ATOM_DEVICE_I2C_ID_MASK 0x00000070
2840 #define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004
2841 #define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001
2842 #define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002
2843 #define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 //For IGP RS600
2844 #define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 //For IGP RS690
2846 #define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080
2847 #define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007
2848 #define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000
2849 #define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001
2852 // Bits0 = 0 - no CRT1 support= 1- CRT1 is supported
2853 // Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported
2854 // Bit 2 = 0 - no TV1 support= 1- TV1 is supported
2855 // Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported
2856 // Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported
2857 // Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported
2858 // Bit 6 = 0 - no DFP6 support= 1- DFP6 is supported
2859 // Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported
2860 // Bit 8 = 0 - no CV support= 1- CV is supported
2861 // Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported
2862 // Bit 10 = 0 - no DFP4 support= 1- DFP4 is supported
2863 // Bit 11 = 0 - no DFP5 support= 1- DFP5 is supported
2867 /****************************************************************************/
2868 /* Structure used in MclkSS_InfoTable */
2869 /****************************************************************************/
2871 // [7:0] - I2C LINE Associate ID
2873 // [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection)
2874 // = 0, [6:0]=SW assisted I2C ID
2875 // [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use
2876 // = 2, HW engine for Multimedia use
2877 // = 3-7 Reserved for future I2C engines
2878 // [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
2880 typedef struct _ATOM_I2C_ID_CONFIG
2883 UCHAR bfHW_Capable:1;
2884 UCHAR bfHW_EngineID:3;
2885 UCHAR bfI2C_LineMux:4;
2887 UCHAR bfI2C_LineMux:4;
2888 UCHAR bfHW_EngineID:3;
2889 UCHAR bfHW_Capable:1;
2891 }ATOM_I2C_ID_CONFIG;
2893 typedef union _ATOM_I2C_ID_CONFIG_ACCESS
2895 ATOM_I2C_ID_CONFIG sbfAccess;
2897 }ATOM_I2C_ID_CONFIG_ACCESS;
2900 /****************************************************************************/
2901 // Structure used in GPIO_I2C_InfoTable
2902 /****************************************************************************/
2903 typedef struct _ATOM_GPIO_I2C_ASSIGMENT
2905 USHORT usClkMaskRegisterIndex;
2906 USHORT usClkEnRegisterIndex;
2907 USHORT usClkY_RegisterIndex;
2908 USHORT usClkA_RegisterIndex;
2909 USHORT usDataMaskRegisterIndex;
2910 USHORT usDataEnRegisterIndex;
2911 USHORT usDataY_RegisterIndex;
2912 USHORT usDataA_RegisterIndex;
2913 ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
2914 UCHAR ucClkMaskShift;
2918 UCHAR ucDataMaskShift;
2919 UCHAR ucDataEnShift;
2920 UCHAR ucDataY_Shift;
2921 UCHAR ucDataA_Shift;
2924 }ATOM_GPIO_I2C_ASSIGMENT;
2926 typedef struct _ATOM_GPIO_I2C_INFO
2928 ATOM_COMMON_TABLE_HEADER sHeader;
2929 ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
2930 }ATOM_GPIO_I2C_INFO;
2932 /****************************************************************************/
2933 // Common Structure used in other structures
2934 /****************************************************************************/
2938 //Please don't add or expand this bitfield structure below, this one will retire soon.!
2939 typedef struct _ATOM_MODE_MISC_INFO
2944 USHORT DoubleClock:1;
2946 USHORT CompositeSync:1;
2947 USHORT V_ReplicationBy2:1;
2948 USHORT H_ReplicationBy2:1;
2949 USHORT VerticalCutOff:1;
2950 USHORT VSyncPolarity:1; //0=Active High, 1=Active Low
2951 USHORT HSyncPolarity:1; //0=Active High, 1=Active Low
2952 USHORT HorizontalCutOff:1;
2954 USHORT HorizontalCutOff:1;
2955 USHORT HSyncPolarity:1; //0=Active High, 1=Active Low
2956 USHORT VSyncPolarity:1; //0=Active High, 1=Active Low
2957 USHORT VerticalCutOff:1;
2958 USHORT H_ReplicationBy2:1;
2959 USHORT V_ReplicationBy2:1;
2960 USHORT CompositeSync:1;
2962 USHORT DoubleClock:1;
2966 }ATOM_MODE_MISC_INFO;
2968 typedef union _ATOM_MODE_MISC_INFO_ACCESS
2970 ATOM_MODE_MISC_INFO sbfAccess;
2972 }ATOM_MODE_MISC_INFO_ACCESS;
2976 typedef union _ATOM_MODE_MISC_INFO_ACCESS
2979 }ATOM_MODE_MISC_INFO_ACCESS;
2984 #define ATOM_H_CUTOFF 0x01
2985 #define ATOM_HSYNC_POLARITY 0x02 //0=Active High, 1=Active Low
2986 #define ATOM_VSYNC_POLARITY 0x04 //0=Active High, 1=Active Low
2987 #define ATOM_V_CUTOFF 0x08
2988 #define ATOM_H_REPLICATIONBY2 0x10
2989 #define ATOM_V_REPLICATIONBY2 0x20
2990 #define ATOM_COMPOSITESYNC 0x40
2991 #define ATOM_INTERLACE 0x80
2992 #define ATOM_DOUBLE_CLOCK_MODE 0x100
2993 #define ATOM_RGB888_MODE 0x200
2996 #define ATOM_REFRESH_43 43
2997 #define ATOM_REFRESH_47 47
2998 #define ATOM_REFRESH_56 56
2999 #define ATOM_REFRESH_60 60
3000 #define ATOM_REFRESH_65 65
3001 #define ATOM_REFRESH_70 70
3002 #define ATOM_REFRESH_72 72
3003 #define ATOM_REFRESH_75 75
3004 #define ATOM_REFRESH_85 85
3006 // ATOM_MODE_TIMING data are exactly the same as VESA timing data.
3007 // Translation from EDID to ATOM_MODE_TIMING, use the following formula.
3009 // VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK
3010 // = EDID_HA + EDID_HBL
3011 // VESA_HDISP = VESA_ACTIVE = EDID_HA
3012 // VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH
3013 // = EDID_HA + EDID_HSO
3014 // VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW
3015 // VESA_BORDER = EDID_BORDER
3017 /****************************************************************************/
3018 // Structure used in SetCRTC_UsingDTDTimingTable
3019 /****************************************************************************/
3020 typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS
3023 USHORT usH_Blanking_Time;
3025 USHORT usV_Blanking_Time;
3026 USHORT usH_SyncOffset;
3027 USHORT usH_SyncWidth;
3028 USHORT usV_SyncOffset;
3029 USHORT usV_SyncWidth;
3030 ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
3031 UCHAR ucH_Border; // From DFP EDID
3033 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
3035 }SET_CRTC_USING_DTD_TIMING_PARAMETERS;
3037 /****************************************************************************/
3038 // Structure used in SetCRTC_TimingTable
3039 /****************************************************************************/
3040 typedef struct _SET_CRTC_TIMING_PARAMETERS
3042 USHORT usH_Total; // horizontal total
3043 USHORT usH_Disp; // horizontal display
3044 USHORT usH_SyncStart; // horozontal Sync start
3045 USHORT usH_SyncWidth; // horizontal Sync width
3046 USHORT usV_Total; // vertical total
3047 USHORT usV_Disp; // vertical display
3048 USHORT usV_SyncStart; // vertical Sync start
3049 USHORT usV_SyncWidth; // vertical Sync width
3050 ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
3051 UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
3052 UCHAR ucOverscanRight; // right
3053 UCHAR ucOverscanLeft; // left
3054 UCHAR ucOverscanBottom; // bottom
3055 UCHAR ucOverscanTop; // top
3057 }SET_CRTC_TIMING_PARAMETERS;
3058 #define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
3060 /****************************************************************************/
3061 // Structure used in StandardVESA_TimingTable
3062 // AnalogTV_InfoTable
3063 // ComponentVideoInfoTable
3064 /****************************************************************************/
3065 typedef struct _ATOM_MODE_TIMING
3067 USHORT usCRTC_H_Total;
3068 USHORT usCRTC_H_Disp;
3069 USHORT usCRTC_H_SyncStart;
3070 USHORT usCRTC_H_SyncWidth;
3071 USHORT usCRTC_V_Total;
3072 USHORT usCRTC_V_Disp;
3073 USHORT usCRTC_V_SyncStart;
3074 USHORT usCRTC_V_SyncWidth;
3075 USHORT usPixelClock; //in 10Khz unit
3076 ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
3077 USHORT usCRTC_OverscanRight;
3078 USHORT usCRTC_OverscanLeft;
3079 USHORT usCRTC_OverscanBottom;
3080 USHORT usCRTC_OverscanTop;
3082 UCHAR ucInternalModeNumber;
3083 UCHAR ucRefreshRate;
3086 typedef struct _ATOM_DTD_FORMAT
3090 USHORT usHBlanking_Time;
3092 USHORT usVBlanking_Time;
3093 USHORT usHSyncOffset;
3094 USHORT usHSyncWidth;
3095 USHORT usVSyncOffset;
3096 USHORT usVSyncWidth;
3097 USHORT usImageHSize;
3098 USHORT usImageVSize;
3101 ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
3102 UCHAR ucInternalModeNumber;
3103 UCHAR ucRefreshRate;
3106 /****************************************************************************/
3107 // Structure used in LVDS_InfoTable
3108 // * Need a document to describe this table
3109 /****************************************************************************/
3110 #define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
3111 #define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
3112 #define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
3113 #define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
3115 //ucTableFormatRevision=1
3116 //ucTableContentRevision=1
3117 typedef struct _ATOM_LVDS_INFO
3119 ATOM_COMMON_TABLE_HEADER sHeader;
3120 ATOM_DTD_FORMAT sLCDTiming;
3121 USHORT usModePatchTableOffset;
3122 USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
3123 USHORT usOffDelayInMs;
3124 UCHAR ucPowerSequenceDigOntoDEin10Ms;
3125 UCHAR ucPowerSequenceDEtoBLOnin10Ms;
3126 UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
3127 // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
3128 // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
3129 // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
3130 UCHAR ucPanelDefaultRefreshRate;
3131 UCHAR ucPanelIdentification;
3135 //ucTableFormatRevision=1
3136 //ucTableContentRevision=2
3137 typedef struct _ATOM_LVDS_INFO_V12
3139 ATOM_COMMON_TABLE_HEADER sHeader;
3140 ATOM_DTD_FORMAT sLCDTiming;
3141 USHORT usExtInfoTableOffset;
3142 USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
3143 USHORT usOffDelayInMs;
3144 UCHAR ucPowerSequenceDigOntoDEin10Ms;
3145 UCHAR ucPowerSequenceDEtoBLOnin10Ms;
3146 UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
3147 // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
3148 // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
3149 // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
3150 UCHAR ucPanelDefaultRefreshRate;
3151 UCHAR ucPanelIdentification;
3153 USHORT usLCDVenderID;
3154 USHORT usLCDProductID;
3155 UCHAR ucLCDPanel_SpecialHandlingCap;
3156 UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
3157 UCHAR ucReserved[2];
3158 }ATOM_LVDS_INFO_V12;
3160 //Definitions for ucLCDPanel_SpecialHandlingCap:
3162 //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
3163 //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
3164 #define LCDPANEL_CAP_READ_EDID 0x1
3166 //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
3167 //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
3168 //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
3169 #define LCDPANEL_CAP_DRR_SUPPORTED 0x2
3171 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
3172 #define LCDPANEL_CAP_eDP 0x4
3175 //Color Bit Depth definition in EDID V1.4 @BYTE 14h
3177 // 0 0 0 - Color bit depth is undefined
3178 // 0 0 1 - 6 Bits per Primary Color
3179 // 0 1 0 - 8 Bits per Primary Color
3180 // 0 1 1 - 10 Bits per Primary Color
3181 // 1 0 0 - 12 Bits per Primary Color
3182 // 1 0 1 - 14 Bits per Primary Color
3183 // 1 1 0 - 16 Bits per Primary Color
3186 #define PANEL_COLOR_BIT_DEPTH_MASK 0x70
3188 // Bit7:{=0:Random Dithering disabled;1 Random Dithering enabled}
3189 #define PANEL_RANDOM_DITHER 0x80
3190 #define PANEL_RANDOM_DITHER_MASK 0x80
3192 #define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 // no need to change this
3194 /****************************************************************************/
3195 // Structures used by LCD_InfoTable V1.3 Note: previous version was called ATOM_LVDS_INFO_V12
3196 // ASIC Families: NI
3197 // ucTableFormatRevision=1
3198 // ucTableContentRevision=3
3199 /****************************************************************************/
3200 typedef struct _ATOM_LCD_INFO_V13
3202 ATOM_COMMON_TABLE_HEADER sHeader;
3203 ATOM_DTD_FORMAT sLCDTiming;
3204 USHORT usExtInfoTableOffset;
3205 USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
3207 UCHAR ucLCD_Misc; // Reorganized in V13
3208 // Bit0: {=0:single, =1:dual},
3209 // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888} // was {=0:666RGB, =1:888RGB},
3210 // Bit3:2: {Grey level}
3211 // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h)
3212 // Bit7 Reserved. was for ATOM_PANEL_MISC_API_ENABLED, still need it?
3213 UCHAR ucPanelDefaultRefreshRate;
3214 UCHAR ucPanelIdentification;
3216 USHORT usLCDVenderID;
3217 USHORT usLCDProductID;
3218 UCHAR ucLCDPanel_SpecialHandlingCap; // Reorganized in V13
3219 // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own
3220 // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED
3221 // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1)
3223 UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
3224 USHORT usBacklightPWM; // Backlight PWM in Hz. New in _V13
3226 UCHAR ucPowerSequenceDIGONtoDE_in4Ms;
3227 UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms;
3228 UCHAR ucPowerSequenceDEtoDIGON_in4Ms;
3229 UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms;
3231 UCHAR ucOffDelay_in4Ms;
3232 UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms;
3233 UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms;
3236 ULONG ulReserved[4];
3239 #define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13
3241 //Definitions for ucLCD_Misc
3242 #define ATOM_PANEL_MISC_V13_DUAL 0x00000001
3243 #define ATOM_PANEL_MISC_V13_FPDI 0x00000002
3244 #define ATOM_PANEL_MISC_V13_GREY_LEVEL 0x0000000C
3245 #define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT 2
3246 #define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK 0x70
3247 #define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR 0x10
3248 #define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR 0x20
3250 //Color Bit Depth definition in EDID V1.4 @BYTE 14h
3252 // 0 0 0 - Color bit depth is undefined
3253 // 0 0 1 - 6 Bits per Primary Color
3254 // 0 1 0 - 8 Bits per Primary Color
3255 // 0 1 1 - 10 Bits per Primary Color
3256 // 1 0 0 - 12 Bits per Primary Color
3257 // 1 0 1 - 14 Bits per Primary Color
3258 // 1 1 0 - 16 Bits per Primary Color
3261 //Definitions for ucLCDPanel_SpecialHandlingCap:
3263 //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
3264 //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
3265 #define LCDPANEL_CAP_V13_READ_EDID 0x1 // = LCDPANEL_CAP_READ_EDID no change comparing to previous version
3267 //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
3268 //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
3269 //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
3270 #define LCDPANEL_CAP_V13_DRR_SUPPORTED 0x2 // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version
3272 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
3273 #define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version
3275 typedef struct _ATOM_PATCH_RECORD_MODE
3280 }ATOM_PATCH_RECORD_MODE;
3282 typedef struct _ATOM_LCD_RTS_RECORD
3286 }ATOM_LCD_RTS_RECORD;
3288 //!! If the record below exits, it shoud always be the first record for easy use in command table!!!
3289 // The record below is only used when LVDS_Info is present. From ATOM_LVDS_INFO_V12, use ucLCDPanel_SpecialHandlingCap instead.
3290 typedef struct _ATOM_LCD_MODE_CONTROL_CAP
3294 }ATOM_LCD_MODE_CONTROL_CAP;
3296 #define LCD_MODE_CAP_BL_OFF 1
3297 #define LCD_MODE_CAP_CRTC_OFF 2
3298 #define LCD_MODE_CAP_PANEL_OFF 4
3300 typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
3303 UCHAR ucFakeEDIDLength;
3304 UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements.
3305 } ATOM_FAKE_EDID_PATCH_RECORD;
3307 typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD
3312 }ATOM_PANEL_RESOLUTION_PATCH_RECORD;
3314 #define LCD_MODE_PATCH_RECORD_MODE_TYPE 1
3315 #define LCD_RTS_RECORD_TYPE 2
3316 #define LCD_CAP_RECORD_TYPE 3
3317 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
3318 #define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
3319 #define ATOM_RECORD_END_TYPE 0xFF
3321 /****************************Spread Spectrum Info Table Definitions **********************/
3323 //ucTableFormatRevision=1
3324 //ucTableContentRevision=2
3325 typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT
3327 USHORT usSpreadSpectrumPercentage;
3328 UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Bit2=1: PCIE REFCLK SS =0 iternal PPLL SS Others:TBD
3332 UCHAR ucRecommendedRef_Div;
3333 UCHAR ucSS_Range; //it was reserved for V11
3334 }ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
3336 #define ATOM_MAX_SS_ENTRY 16
3337 #define ATOM_DP_SS_ID1 0x0f1 // SS ID for internal DP stream at 2.7Ghz. if ATOM_DP_SS_ID2 does not exist in SS_InfoTable, it is used for internal DP stream at 1.62Ghz as well.
3338 #define ATOM_DP_SS_ID2 0x0f2 // SS ID for internal DP stream at 1.62Ghz, if it exists in SS_InfoTable.
3339 #define ATOM_LVLINK_2700MHz_SS_ID 0x0f3 // SS ID for LV link translator chip at 2.7Ghz
3340 #define ATOM_LVLINK_1620MHz_SS_ID 0x0f4 // SS ID for LV link translator chip at 1.62Ghz
3343 #define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
3344 #define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
3345 #define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
3346 #define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
3347 #define ATOM_INTERNAL_SS_MASK 0x00000000
3348 #define ATOM_EXTERNAL_SS_MASK 0x00000002
3349 #define EXEC_SS_STEP_SIZE_SHIFT 2
3350 #define EXEC_SS_DELAY_SHIFT 4
3351 #define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4
3353 typedef struct _ATOM_SPREAD_SPECTRUM_INFO
3355 ATOM_COMMON_TABLE_HEADER sHeader;
3356 ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY];
3357 }ATOM_SPREAD_SPECTRUM_INFO;
3359 /****************************************************************************/
3360 // Structure used in AnalogTV_InfoTable (Top level)
3361 /****************************************************************************/
3362 //ucTVBootUpDefaultStd definition:
3373 //ucTVSupportedStd definition:
3374 #define NTSC_SUPPORT 0x1
3375 #define NTSCJ_SUPPORT 0x2
3377 #define PAL_SUPPORT 0x4
3378 #define PALM_SUPPORT 0x8
3379 #define PALCN_SUPPORT 0x10
3380 #define PALN_SUPPORT 0x20
3381 #define PAL60_SUPPORT 0x40
3382 #define SECAM_SUPPORT 0x80
3384 #define MAX_SUPPORTED_TV_TIMING 2
3386 typedef struct _ATOM_ANALOG_TV_INFO
3388 ATOM_COMMON_TABLE_HEADER sHeader;
3389 UCHAR ucTV_SupportedStandard;
3390 UCHAR ucTV_BootUpDefaultStandard;
3391 UCHAR ucExt_TV_ASIC_ID;
3392 UCHAR ucExt_TV_ASIC_SlaveAddr;
3393 /*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];*/
3394 ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING];
3395 }ATOM_ANALOG_TV_INFO;
3397 #define MAX_SUPPORTED_TV_TIMING_V1_2 3
3399 typedef struct _ATOM_ANALOG_TV_INFO_V1_2
3401 ATOM_COMMON_TABLE_HEADER sHeader;
3402 UCHAR ucTV_SupportedStandard;
3403 UCHAR ucTV_BootUpDefaultStandard;
3404 UCHAR ucExt_TV_ASIC_ID;
3405 UCHAR ucExt_TV_ASIC_SlaveAddr;
3406 ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2];
3407 }ATOM_ANALOG_TV_INFO_V1_2;
3409 typedef struct _ATOM_DPCD_INFO
3411 UCHAR ucRevisionNumber; //10h : Revision 1.0; 11h : Revision 1.1
3412 UCHAR ucMaxLinkRate; //06h : 1.62Gbps per lane; 0Ah = 2.7Gbps per lane
3413 UCHAR ucMaxLane; //Bits 4:0 = MAX_LANE_COUNT (1/2/4). Bit 7 = ENHANCED_FRAME_CAP
3414 UCHAR ucMaxDownSpread; //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change according to DP spec)
3417 #define ATOM_DPCD_MAX_LANE_MASK 0x1F
3419 /**************************************************************************/
3420 // VRAM usage and their defintions
3422 // One chunk of VRAM used by Bios are for HWICON surfaces,EDID data.
3423 // Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below.
3424 // All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned!
3425 // To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR
3426 // To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
3428 #ifndef VESA_MEMORY_IN_64K_BLOCK
3429 #define VESA_MEMORY_IN_64K_BLOCK 0x100 //256*64K=16Mb (Max. VESA memory is 16Mb!)
3432 #define ATOM_EDID_RAW_DATASIZE 256 //In Bytes
3433 #define ATOM_HWICON_SURFACE_SIZE 4096 //In Bytes
3434 #define ATOM_HWICON_INFOTABLE_SIZE 32
3435 #define MAX_DTD_MODE_IN_VRAM 6
3436 #define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT)
3437 #define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
3438 //20 bytes for Encoder Type and DPCD in STD EDID area
3439 #define DFP_ENCODER_TYPE_OFFSET (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)
3440 #define ATOM_DP_DPCD_OFFSET (DFP_ENCODER_TYPE_OFFSET + 4 )
3442 #define ATOM_HWICON1_SURFACE_ADDR 0
3443 #define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
3444 #define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
3445 #define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
3446 #define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3447 #define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3449 #define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3450 #define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3451 #define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3453 #define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3455 #define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3456 #define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3457 #define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3459 #define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3460 #define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3461 #define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3463 #define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3464 #define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3465 #define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3467 #define ATOM_DFP6_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3468 #define ATOM_DFP6_DTD_MODE_TBL_ADDR (ATOM_DFP6_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3469 #define ATOM_DFP6_STD_MODE_TBL_ADDR (ATOM_DFP6_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3471 #define ATOM_DFP2_EDID_ADDR (ATOM_DFP6_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3472 #define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3473 #define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3475 #define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3476 #define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3477 #define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3479 #define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3480 #define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3481 #define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3483 #define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3484 #define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3485 #define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3487 #define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3488 #define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3489 #define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3491 #define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3493 #define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 1024)
3494 #define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START + 512
3496 //The size below is in Kb!
3497 #define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
3499 #define ATOM_VRAM_RESERVE_V2_SIZE 32
3501 #define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
3502 #define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
3503 #define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
3504 #define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0
3506 /***********************************************************************************/
3507 // Structure used in VRAM_UsageByFirmwareTable
3508 // Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm
3510 // note2: From RV770, the memory is more than 32bit addressable, so we will change
3511 // ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains
3512 // exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware
3513 // (in offset to start of memory address) is KB aligned instead of byte aligend.
3514 /***********************************************************************************/
3516 /* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged constant across VGA or non VGA adapter,
3517 for CAIL, The size of FB access area is known, only thing missing is the Offset of FB Access area, so we can have:
3519 If (ulStartAddrUsedByFirmware!=0)
3520 FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB;
3521 Reserved area has been claimed by VBIOS including this FB access area; CAIL doesn't need to reserve any extra area for this purpose
3524 FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB;
3526 FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB
3528 CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
3530 #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
3532 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
3534 ULONG ulStartAddrUsedByFirmware;
3535 USHORT usFirmwareUseInKb;
3537 }ATOM_FIRMWARE_VRAM_RESERVE_INFO;
3539 typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE
3541 ATOM_COMMON_TABLE_HEADER sHeader;
3542 ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
3543 }ATOM_VRAM_USAGE_BY_FIRMWARE;
3545 // change verion to 1.5, when allow driver to allocate the vram area for command table access.
3546 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5
3548 ULONG ulStartAddrUsedByFirmware;
3549 USHORT usFirmwareUseInKb;
3550 USHORT usFBUsedByDrvInKb;
3551 }ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5;
3553 typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5
3555 ATOM_COMMON_TABLE_HEADER sHeader;
3556 ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5 asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
3557 }ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5;
3559 /****************************************************************************/
3560 // Structure used in GPIO_Pin_LUTTable
3561 /****************************************************************************/
3562 typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
3564 USHORT usGpioPin_AIndex;
3565 UCHAR ucGpioPinBitShift;
3567 }ATOM_GPIO_PIN_ASSIGNMENT;
3569 typedef struct _ATOM_GPIO_PIN_LUT
3571 ATOM_COMMON_TABLE_HEADER sHeader;
3572 ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1];
3575 /****************************************************************************/
3576 // Structure used in ComponentVideoInfoTable
3577 /****************************************************************************/
3578 #define GPIO_PIN_ACTIVE_HIGH 0x1
3580 #define MAX_SUPPORTED_CV_STANDARDS 5
3582 // definitions for ATOM_D_INFO.ucSettings
3583 #define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F // [4:0]
3584 #define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 // [6:5] = must be zeroed out
3585 #define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 // [7]
3587 typedef struct _ATOM_GPIO_INFO
3594 // definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector)
3595 #define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2
3597 // definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i
3598 #define ATOM_GPIO_DEFAULT_MODE_EN 0x80 //[7];
3599 #define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F //[6:0]
3601 // definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode
3602 //Line 3 out put 5V.
3603 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 //represent gpio 3 state for 16:9
3604 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 //represent gpio 4 state for 16:9
3605 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0
3607 //Line 3 out put 2.2V
3608 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 //represent gpio 3 state for 4:3 Letter box
3609 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 //represent gpio 4 state for 4:3 Letter box
3610 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
3613 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 //represent gpio 3 state for 4:3
3614 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 //represent gpio 4 state for 4:3
3615 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4
3617 #define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F // bit [5:0]
3619 #define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 //bit 7
3621 //GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks.
3622 #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
3623 #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
3626 typedef struct _ATOM_COMPONENT_VIDEO_INFO
3628 ATOM_COMMON_TABLE_HEADER sHeader;
3629 USHORT usMask_PinRegisterIndex;
3630 USHORT usEN_PinRegisterIndex;
3631 USHORT usY_PinRegisterIndex;
3632 USHORT usA_PinRegisterIndex;
3634 UCHAR ucPinActiveState; //ucPinActiveState: Bit0=1 active high, =0 active low
3635 ATOM_DTD_FORMAT sReserved; // must be zeroed out
3641 UCHAR ucLetterBoxMode;
3642 UCHAR ucReserved[3];
3643 UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
3644 ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
3645 ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
3646 }ATOM_COMPONENT_VIDEO_INFO;
3648 //ucTableFormatRevision=2
3649 //ucTableContentRevision=1
3650 typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21
3652 ATOM_COMMON_TABLE_HEADER sHeader;
3659 UCHAR ucLetterBoxMode;
3660 UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
3661 ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
3662 ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
3663 }ATOM_COMPONENT_VIDEO_INFO_V21;
3665 #define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21
3667 /****************************************************************************/
3668 // Structure used in object_InfoTable
3669 /****************************************************************************/
3670 typedef struct _ATOM_OBJECT_HEADER
3672 ATOM_COMMON_TABLE_HEADER sHeader;
3673 USHORT usDeviceSupport;
3674 USHORT usConnectorObjectTableOffset;
3675 USHORT usRouterObjectTableOffset;
3676 USHORT usEncoderObjectTableOffset;
3677 USHORT usProtectionObjectTableOffset; //only available when Protection block is independent.
3678 USHORT usDisplayPathTableOffset;
3679 }ATOM_OBJECT_HEADER;
3681 typedef struct _ATOM_OBJECT_HEADER_V3
3683 ATOM_COMMON_TABLE_HEADER sHeader;
3684 USHORT usDeviceSupport;
3685 USHORT usConnectorObjectTableOffset;
3686 USHORT usRouterObjectTableOffset;
3687 USHORT usEncoderObjectTableOffset;
3688 USHORT usProtectionObjectTableOffset; //only available when Protection block is independent.
3689 USHORT usDisplayPathTableOffset;
3690 USHORT usMiscObjectTableOffset;
3691 }ATOM_OBJECT_HEADER_V3;
3693 typedef struct _ATOM_DISPLAY_OBJECT_PATH
3695 USHORT usDeviceTag; //supported device
3696 USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH
3697 USHORT usConnObjectId; //Connector Object ID
3698 USHORT usGPUObjectId; //GPU ID
3699 USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
3700 }ATOM_DISPLAY_OBJECT_PATH;
3702 typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH
3704 USHORT usDeviceTag; //supported device
3705 USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH
3706 USHORT usConnObjectId; //Connector Object ID
3707 USHORT usGPUObjectId; //GPU ID
3708 USHORT usGraphicObjIds[2]; //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder
3709 }ATOM_DISPLAY_EXTERNAL_OBJECT_PATH;
3711 typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
3713 UCHAR ucNumOfDispPath;
3716 ATOM_DISPLAY_OBJECT_PATH asDispPath[1];
3717 }ATOM_DISPLAY_OBJECT_PATH_TABLE;
3720 typedef struct _ATOM_OBJECT //each object has this structure
3723 USHORT usSrcDstTableOffset;
3724 USHORT usRecordOffset; //this pointing to a bunch of records defined below
3728 typedef struct _ATOM_OBJECT_TABLE //Above 4 object table offset pointing to a bunch of objects all have this structure
3730 UCHAR ucNumberOfObjects;
3732 ATOM_OBJECT asObjects[1];
3735 typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure
3737 UCHAR ucNumberOfSrc;
3738 USHORT usSrcObjectID[1];
3739 UCHAR ucNumberOfDst;
3740 USHORT usDstObjectID[1];
3741 }ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
3744 //Two definitions below are for OPM on MXM module designs
3746 #define EXT_HPDPIN_LUTINDEX_0 0
3747 #define EXT_HPDPIN_LUTINDEX_1 1
3748 #define EXT_HPDPIN_LUTINDEX_2 2
3749 #define EXT_HPDPIN_LUTINDEX_3 3
3750 #define EXT_HPDPIN_LUTINDEX_4 4
3751 #define EXT_HPDPIN_LUTINDEX_5 5
3752 #define EXT_HPDPIN_LUTINDEX_6 6
3753 #define EXT_HPDPIN_LUTINDEX_7 7
3754 #define MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES (EXT_HPDPIN_LUTINDEX_7+1)
3756 #define EXT_AUXDDC_LUTINDEX_0 0
3757 #define EXT_AUXDDC_LUTINDEX_1 1
3758 #define EXT_AUXDDC_LUTINDEX_2 2
3759 #define EXT_AUXDDC_LUTINDEX_3 3
3760 #define EXT_AUXDDC_LUTINDEX_4 4
3761 #define EXT_AUXDDC_LUTINDEX_5 5
3762 #define EXT_AUXDDC_LUTINDEX_6 6
3763 #define EXT_AUXDDC_LUTINDEX_7 7
3764 #define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES (EXT_AUXDDC_LUTINDEX_7+1)
3766 //ucChannelMapping are defined as following
3767 //for DP connector, eDP, DP to VGA/LVDS
3768 //Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3769 //Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3770 //Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3771 //Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3772 typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING
3775 UCHAR ucDP_Lane3_Source:2;
3776 UCHAR ucDP_Lane2_Source:2;
3777 UCHAR ucDP_Lane1_Source:2;
3778 UCHAR ucDP_Lane0_Source:2;
3780 UCHAR ucDP_Lane0_Source:2;
3781 UCHAR ucDP_Lane1_Source:2;
3782 UCHAR ucDP_Lane2_Source:2;
3783 UCHAR ucDP_Lane3_Source:2;
3785 }ATOM_DP_CONN_CHANNEL_MAPPING;
3787 //for DVI/HDMI, in dual link case, both links have to have same mapping.
3788 //Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3789 //Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3790 //Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3791 //Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
3792 typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING
3795 UCHAR ucDVI_CLK_Source:2;
3796 UCHAR ucDVI_DATA0_Source:2;
3797 UCHAR ucDVI_DATA1_Source:2;
3798 UCHAR ucDVI_DATA2_Source:2;
3800 UCHAR ucDVI_DATA2_Source:2;
3801 UCHAR ucDVI_DATA1_Source:2;
3802 UCHAR ucDVI_DATA0_Source:2;
3803 UCHAR ucDVI_CLK_Source:2;
3805 }ATOM_DVI_CONN_CHANNEL_MAPPING;
3807 typedef struct _EXT_DISPLAY_PATH
3809 USHORT usDeviceTag; //A bit vector to show what devices are supported
3810 USHORT usDeviceACPIEnum; //16bit device ACPI id.
3811 USHORT usDeviceConnector; //A physical connector for displays to plug in, using object connector definitions
3812 UCHAR ucExtAUXDDCLutIndex; //An index into external AUX/DDC channel LUT
3813 UCHAR ucExtHPDPINLutIndex; //An index into external HPD pin LUT
3814 USHORT usExtEncoderObjId; //external encoder object id
3816 UCHAR ucChannelMapping; // if ucChannelMapping=0, using default one to one mapping
3817 ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
3818 ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
3821 USHORT usReserved[2];
3824 #define NUMBER_OF_UCHAR_FOR_GUID 16
3825 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7
3827 typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
3829 ATOM_COMMON_TABLE_HEADER sHeader;
3830 UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string
3831 EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
3832 UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0.
3833 UCHAR uc3DStereoPinId; // use for eDP panel
3834 UCHAR Reserved [6]; // for potential expansion
3835 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
3837 //Related definitions, all records are different but they have a commond header
3838 typedef struct _ATOM_COMMON_RECORD_HEADER
3840 UCHAR ucRecordType; //An emun to indicate the record type
3841 UCHAR ucRecordSize; //The size of the whole record in byte
3842 }ATOM_COMMON_RECORD_HEADER;
3845 #define ATOM_I2C_RECORD_TYPE 1
3846 #define ATOM_HPD_INT_RECORD_TYPE 2
3847 #define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3
3848 #define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4
3849 #define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
3850 #define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
3851 #define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7
3852 #define ATOM_JTAG_RECORD_TYPE 8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
3853 #define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9
3854 #define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10
3855 #define ATOM_CONNECTOR_CF_RECORD_TYPE 11
3856 #define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12
3857 #define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13
3858 #define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14
3859 #define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
3860 #define ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE 16 //This is for the case when connectors are not known to object table
3861 #define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE 17 //This is for the case when connectors are not known to object table
3862 #define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record
3863 #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19
3864 #define ATOM_ENCODER_CAP_RECORD_TYPE 20
3867 //Must be updated when new record type is added,equal to that record definition!
3868 #define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE
3870 typedef struct _ATOM_I2C_RECORD
3872 ATOM_COMMON_RECORD_HEADER sheader;
3873 ATOM_I2C_ID_CONFIG sucI2cId;
3874 UCHAR ucI2CAddr; //The slave address, it's 0 when the record is attached to connector for DDC
3877 typedef struct _ATOM_HPD_INT_RECORD
3879 ATOM_COMMON_RECORD_HEADER sheader;
3880 UCHAR ucHPDIntGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info
3881 UCHAR ucPlugged_PinState;
3882 }ATOM_HPD_INT_RECORD;
3885 typedef struct _ATOM_OUTPUT_PROTECTION_RECORD
3887 ATOM_COMMON_RECORD_HEADER sheader;
3888 UCHAR ucProtectionFlag;
3890 }ATOM_OUTPUT_PROTECTION_RECORD;
3892 typedef struct _ATOM_CONNECTOR_DEVICE_TAG
3894 ULONG ulACPIDeviceEnum; //Reserved for now
3895 USHORT usDeviceID; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
3897 }ATOM_CONNECTOR_DEVICE_TAG;
3899 typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD
3901 ATOM_COMMON_RECORD_HEADER sheader;
3902 UCHAR ucNumberOfDevice;
3904 ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
3905 }ATOM_CONNECTOR_DEVICE_TAG_RECORD;
3908 typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD
3910 ATOM_COMMON_RECORD_HEADER sheader;
3911 UCHAR ucConfigGPIOID;
3912 UCHAR ucConfigGPIOState; //Set to 1 when it's active high to enable external flow in
3913 UCHAR ucFlowinGPIPID;
3914 UCHAR ucExtInGPIPID;
3915 }ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
3917 typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD
3919 ATOM_COMMON_RECORD_HEADER sheader;
3920 UCHAR ucCTL1GPIO_ID;
3921 UCHAR ucCTL1GPIOState; //Set to 1 when it's active high
3922 UCHAR ucCTL2GPIO_ID;
3923 UCHAR ucCTL2GPIOState; //Set to 1 when it's active high
3924 UCHAR ucCTL3GPIO_ID;
3925 UCHAR ucCTL3GPIOState; //Set to 1 when it's active high
3926 UCHAR ucCTLFPGA_IN_ID;
3928 }ATOM_ENCODER_FPGA_CONTROL_RECORD;
3930 typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD
3932 ATOM_COMMON_RECORD_HEADER sheader;
3933 UCHAR ucGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info
3934 UCHAR ucTVActiveState; //Indicating when the pin==0 or 1 when TV is connected
3935 }ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
3937 typedef struct _ATOM_JTAG_RECORD
3939 ATOM_COMMON_RECORD_HEADER sheader;
3941 UCHAR ucTMSGPIOState; //Set to 1 when it's active high
3943 UCHAR ucTCKGPIOState; //Set to 1 when it's active high
3945 UCHAR ucTDOGPIOState; //Set to 1 when it's active high
3947 UCHAR ucTDIGPIOState; //Set to 1 when it's active high
3952 //The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
3953 typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR
3955 UCHAR ucGPIOID; // GPIO_ID, find the corresponding ID in GPIO_LUT table
3956 UCHAR ucGPIO_PinState; // Pin state showing how to set-up the pin
3957 }ATOM_GPIO_PIN_CONTROL_PAIR;
3959 typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD
3961 ATOM_COMMON_RECORD_HEADER sheader;
3962 UCHAR ucFlags; // Future expnadibility
3963 UCHAR ucNumberOfPins; // Number of GPIO pins used to control the object
3964 ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins
3965 }ATOM_OBJECT_GPIO_CNTL_RECORD;
3967 //Definitions for GPIO pin state
3968 #define GPIO_PIN_TYPE_INPUT 0x00
3969 #define GPIO_PIN_TYPE_OUTPUT 0x10
3970 #define GPIO_PIN_TYPE_HW_CONTROL 0x20
3972 //For GPIO_PIN_TYPE_OUTPUT the following is defined
3973 #define GPIO_PIN_OUTPUT_STATE_MASK 0x01
3974 #define GPIO_PIN_OUTPUT_STATE_SHIFT 0
3975 #define GPIO_PIN_STATE_ACTIVE_LOW 0x0
3976 #define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
3978 // Indexes to GPIO array in GLSync record
3979 #define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0
3980 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1
3981 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2
3982 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ 3
3983 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4
3984 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
3985 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6
3986 #define ATOM_GPIO_INDEX_GLSYNC_MAX 7
3988 typedef struct _ATOM_ENCODER_DVO_CF_RECORD
3990 ATOM_COMMON_RECORD_HEADER sheader;
3991 ULONG ulStrengthControl; // DVOA strength control for CF
3993 }ATOM_ENCODER_DVO_CF_RECORD;
3995 // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
3996 #define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by this path
3998 typedef struct _ATOM_ENCODER_CAP_RECORD
4000 ATOM_COMMON_RECORD_HEADER sheader;
4002 USHORT usEncoderCap;
4005 USHORT usReserved:15; // Bit1-15 may be defined for other capability in future
4006 USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
4008 USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
4009 USHORT usReserved:15; // Bit1-15 may be defined for other capability in future
4013 }ATOM_ENCODER_CAP_RECORD;
4015 // value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
4016 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
4017 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
4019 typedef struct _ATOM_CONNECTOR_CF_RECORD
4021 ATOM_COMMON_RECORD_HEADER sheader;
4023 UCHAR ucFlowCntlGpioId;
4024 UCHAR ucSwapCntlGpioId;
4025 UCHAR ucConnectedDvoBundle;
4027 }ATOM_CONNECTOR_CF_RECORD;
4029 typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD
4031 ATOM_COMMON_RECORD_HEADER sheader;
4032 ATOM_DTD_FORMAT asTiming;
4033 }ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
4035 typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD
4037 ATOM_COMMON_RECORD_HEADER sheader; //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE
4038 UCHAR ucSubConnectorType; //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A
4040 }ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
4043 typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD
4045 ATOM_COMMON_RECORD_HEADER sheader;
4046 UCHAR ucMuxType; //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state
4047 UCHAR ucMuxControlPin;
4048 UCHAR ucMuxState[2]; //for alligment purpose
4049 }ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
4051 typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD
4053 ATOM_COMMON_RECORD_HEADER sheader;
4055 UCHAR ucMuxControlPin;
4056 UCHAR ucMuxState[2]; //for alligment purpose
4057 }ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
4060 #define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f
4061 #define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01
4063 typedef struct _ATOM_CONNECTOR_HPDPIN_LUT_RECORD //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE
4065 ATOM_COMMON_RECORD_HEADER sheader;
4066 UCHAR ucHPDPINMap[MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES]; //An fixed size array which maps external pins to internal GPIO_PIN_INFO table
4067 }ATOM_CONNECTOR_HPDPIN_LUT_RECORD;
4069 typedef struct _ATOM_CONNECTOR_AUXDDC_LUT_RECORD //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE
4071 ATOM_COMMON_RECORD_HEADER sheader;
4072 ATOM_I2C_ID_CONFIG ucAUXDDCMap[MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES]; //An fixed size array which maps external pins to internal DDC ID
4073 }ATOM_CONNECTOR_AUXDDC_LUT_RECORD;
4075 typedef struct _ATOM_OBJECT_LINK_RECORD
4077 ATOM_COMMON_RECORD_HEADER sheader;
4078 USHORT usObjectID; //could be connector, encorder or other object in object.h
4079 }ATOM_OBJECT_LINK_RECORD;
4081 typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD
4083 ATOM_COMMON_RECORD_HEADER sheader;
4085 }ATOM_CONNECTOR_REMOTE_CAP_RECORD;
4087 /****************************************************************************/
4088 // ASIC voltage data table
4089 /****************************************************************************/
4090 typedef struct _ATOM_VOLTAGE_INFO_HEADER
4092 USHORT usVDDCBaseLevel; //In number of 50mv unit
4093 USHORT usReserved; //For possible extension table offset
4094 UCHAR ucNumOfVoltageEntries;
4095 UCHAR ucBytesPerVoltageEntry;
4096 UCHAR ucVoltageStep; //Indicating in how many mv increament is one step, 0.5mv unit
4097 UCHAR ucDefaultVoltageEntry;
4098 UCHAR ucVoltageControlI2cLine;
4099 UCHAR ucVoltageControlAddress;
4100 UCHAR ucVoltageControlOffset;
4101 }ATOM_VOLTAGE_INFO_HEADER;
4103 typedef struct _ATOM_VOLTAGE_INFO
4105 ATOM_COMMON_TABLE_HEADER sHeader;
4106 ATOM_VOLTAGE_INFO_HEADER viHeader;
4107 UCHAR ucVoltageEntries[64]; //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry
4111 typedef struct _ATOM_VOLTAGE_FORMULA
4113 USHORT usVoltageBaseLevel; // In number of 1mv unit
4114 USHORT usVoltageStep; // Indicating in how many mv increament is one step, 1mv unit
4115 UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage
4116 UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv
4117 UCHAR ucBaseVID; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep
4119 UCHAR ucVIDAdjustEntries[32]; // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries
4120 }ATOM_VOLTAGE_FORMULA;
4122 typedef struct _VOLTAGE_LUT_ENTRY
4124 USHORT usVoltageCode; // The Voltage ID, either GPIO or I2C code
4125 USHORT usVoltageValue; // The corresponding Voltage Value, in mV
4128 typedef struct _ATOM_VOLTAGE_FORMULA_V2
4130 UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage
4131 UCHAR ucReserved[3];
4132 VOLTAGE_LUT_ENTRY asVIDAdjustEntries[32];// 32 is for allocation, the actual number of entries is in ucNumOfVoltageEntries
4133 }ATOM_VOLTAGE_FORMULA_V2;
4135 typedef struct _ATOM_VOLTAGE_CONTROL
4137 UCHAR ucVoltageControlId; //Indicate it is controlled by I2C or GPIO or HW state machine
4138 UCHAR ucVoltageControlI2cLine;
4139 UCHAR ucVoltageControlAddress;
4140 UCHAR ucVoltageControlOffset;
4141 USHORT usGpioPin_AIndex; //GPIO_PAD register index
4142 UCHAR ucGpioPinBitShift[9]; //at most 8 pin support 255 VIDs, termintate with 0xff
4144 }ATOM_VOLTAGE_CONTROL;
4146 // Define ucVoltageControlId
4147 #define VOLTAGE_CONTROLLED_BY_HW 0x00
4148 #define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F
4149 #define VOLTAGE_CONTROLLED_BY_GPIO 0x80
4150 #define VOLTAGE_CONTROL_ID_LM64 0x01 //I2C control, used for R5xx Core Voltage
4151 #define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
4152 #define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage
4153 #define VOLTAGE_CONTROL_ID_DS4402 0x04
4154 #define VOLTAGE_CONTROL_ID_UP6266 0x05
4155 #define VOLTAGE_CONTROL_ID_SCORPIO 0x06
4156 #define VOLTAGE_CONTROL_ID_VT1556M 0x07
4157 #define VOLTAGE_CONTROL_ID_CHL822x 0x08
4158 #define VOLTAGE_CONTROL_ID_VT1586M 0x09
4160 typedef struct _ATOM_VOLTAGE_OBJECT
4162 UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
4163 UCHAR ucSize; //Size of Object
4164 ATOM_VOLTAGE_CONTROL asControl; //describ how to control
4165 ATOM_VOLTAGE_FORMULA asFormula; //Indicate How to convert real Voltage to VID
4166 }ATOM_VOLTAGE_OBJECT;
4168 typedef struct _ATOM_VOLTAGE_OBJECT_V2
4170 UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
4171 UCHAR ucSize; //Size of Object
4172 ATOM_VOLTAGE_CONTROL asControl; //describ how to control
4173 ATOM_VOLTAGE_FORMULA_V2 asFormula; //Indicate How to convert real Voltage to VID
4174 }ATOM_VOLTAGE_OBJECT_V2;
4176 typedef struct _ATOM_VOLTAGE_OBJECT_INFO
4178 ATOM_COMMON_TABLE_HEADER sHeader;
4179 ATOM_VOLTAGE_OBJECT asVoltageObj[3]; //Info for Voltage control
4180 }ATOM_VOLTAGE_OBJECT_INFO;
4182 typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V2
4184 ATOM_COMMON_TABLE_HEADER sHeader;
4185 ATOM_VOLTAGE_OBJECT_V2 asVoltageObj[3]; //Info for Voltage control
4186 }ATOM_VOLTAGE_OBJECT_INFO_V2;
4188 typedef struct _ATOM_LEAKID_VOLTAGE
4193 }ATOM_LEAKID_VOLTAGE;
4195 typedef struct _ATOM_ASIC_PROFILE_VOLTAGE
4200 USHORT usEfuseSpareStartAddr;
4201 USHORT usFuseIndex[8]; //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id,
4202 ATOM_LEAKID_VOLTAGE asLeakVol[2]; //Leakid and relatd voltage
4203 }ATOM_ASIC_PROFILE_VOLTAGE;
4206 #define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1
4207 #define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1
4208 #define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2
4210 typedef struct _ATOM_ASIC_PROFILING_INFO
4212 ATOM_COMMON_TABLE_HEADER asHeader;
4213 ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
4214 }ATOM_ASIC_PROFILING_INFO;
4216 typedef struct _ATOM_POWER_SOURCE_OBJECT
4218 UCHAR ucPwrSrcId; // Power source
4219 UCHAR ucPwrSensorType; // GPIO, I2C or none
4220 UCHAR ucPwrSensId; // if GPIO detect, it is GPIO id, if I2C detect, it is I2C id
4221 UCHAR ucPwrSensSlaveAddr; // Slave address if I2C detect
4222 UCHAR ucPwrSensRegIndex; // I2C register Index if I2C detect
4223 UCHAR ucPwrSensRegBitMask; // detect which bit is used if I2C detect
4224 UCHAR ucPwrSensActiveState; // high active or low active
4225 UCHAR ucReserve[3]; // reserve
4226 USHORT usSensPwr; // in unit of watt
4227 }ATOM_POWER_SOURCE_OBJECT;
4229 typedef struct _ATOM_POWER_SOURCE_INFO
4231 ATOM_COMMON_TABLE_HEADER asHeader;
4232 UCHAR asPwrbehave[16];
4233 ATOM_POWER_SOURCE_OBJECT asPwrObj[1];
4234 }ATOM_POWER_SOURCE_INFO;
4238 #define POWERSOURCE_PCIE_ID1 0x00
4239 #define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01
4240 #define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02
4241 #define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04
4242 #define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08
4244 //define ucPwrSensorId
4245 #define POWER_SENSOR_ALWAYS 0x00
4246 #define POWER_SENSOR_GPIO 0x01
4247 #define POWER_SENSOR_I2C 0x02
4249 typedef struct _ATOM_CLK_VOLT_CAPABILITY
4251 ULONG ulVoltageIndex; // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table
4252 ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
4253 }ATOM_CLK_VOLT_CAPABILITY;
4255 typedef struct _ATOM_AVAILABLE_SCLK_LIST
4257 ULONG ulSupportedSCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
4258 USHORT usVoltageIndex; // The Voltage Index indicated by FUSE for specified SCLK
4259 USHORT usVoltageID; // The Voltage ID indicated by FUSE for specified SCLK
4260 }ATOM_AVAILABLE_SCLK_LIST;
4262 // ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition
4263 #define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE 1 // refer to ulSystemConfig bit[0]
4265 // this IntegrateSystemInfoTable is used for Liano/Ontario APU
4266 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
4268 ATOM_COMMON_TABLE_HEADER sHeader;
4269 ULONG ulBootUpEngineClock;
4270 ULONG ulDentistVCOFreq;
4271 ULONG ulBootUpUMAClock;
4272 ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
4273 ULONG ulBootUpReqDisplayVector;
4274 ULONG ulOtherDisplayMisc;
4276 ULONG ulSB_MMIO_Base_Addr;
4277 USHORT usRequestedPWMFreqInHz;
4280 ULONG ulMinEngineClock;
4281 ULONG ulSystemConfig;
4283 USHORT usNBP0Voltage;
4284 USHORT usNBP1Voltage;
4285 USHORT usBootUpNBVoltage;
4286 USHORT usExtDispConnInfoOffset;
4287 USHORT usPanelRefreshRateRange;
4289 UCHAR ucUMAChannelNumber;
4290 ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];
4291 ULONG ulCSR_M3_ARB_CNTL_UVD[10];
4292 ULONG ulCSR_M3_ARB_CNTL_FS3D[10];
4293 ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
4294 ULONG ulGMCRestoreResetTime;
4295 ULONG ulMinimumNClk;
4297 ULONG ulDDR_DLL_PowerUpTime;
4298 ULONG ulDDR_PLL_PowerUpTime;
4299 USHORT usPCIEClkSSPercentage;
4300 USHORT usPCIEClkSSType;
4301 USHORT usLvdsSSPercentage;
4302 USHORT usLvdsSSpreadRateIn10Hz;
4303 USHORT usHDMISSPercentage;
4304 USHORT usHDMISSpreadRateIn10Hz;
4305 USHORT usDVISSPercentage;
4306 USHORT usDVISSpreadRateIn10Hz;
4307 ULONG ulReserved3[21];
4308 ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
4309 }ATOM_INTEGRATED_SYSTEM_INFO_V6;
4312 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
4313 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08
4315 // ulOtherDisplayMisc
4316 #define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01
4319 /**********************************************************************************************************************
4320 ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
4321 ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
4322 ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
4323 ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
4324 sDISPCLK_Voltage: Report Display clock voltage requirement.
4326 ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects:
4327 ATOM_DEVICE_CRT1_SUPPORT 0x0001
4328 ATOM_DEVICE_CRT2_SUPPORT 0x0010
4329 ATOM_DEVICE_DFP1_SUPPORT 0x0008
4330 ATOM_DEVICE_DFP6_SUPPORT 0x0040
4331 ATOM_DEVICE_DFP2_SUPPORT 0x0080
4332 ATOM_DEVICE_DFP3_SUPPORT 0x0200
4333 ATOM_DEVICE_DFP4_SUPPORT 0x0400
4334 ATOM_DEVICE_DFP5_SUPPORT 0x0800
4335 ATOM_DEVICE_LCD1_SUPPORT 0x0002
4336 ulOtherDisplayMisc: Other display related flags, not defined yet.
4337 ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
4338 =1: TMDS/HDMI Coherent Mode use signel PLL mode.
4339 bit[3]=0: Enable HW AUX mode detection logic
4340 =1: Disable HW AUX mode dettion logic
4341 ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
4343 usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
4344 Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
4346 When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
4347 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
4348 VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
4349 Changing BL using VBIOS function is functional in both driver and non-driver present environment;
4350 and enabling VariBri under the driver environment from PP table is optional.
4352 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
4353 that BL control from GPU is expected.
4354 VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
4355 Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
4357 and enabling VariBri under the driver environment from PP table is optional.
4359 ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt.
4360 Threshold on value to enter HTC_active state.
4361 ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
4362 To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
4363 ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
4364 ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
4365 =1: PCIE Power Gating Enabled
4366 Bit[1]=0: DDR-DLL shut-down feature disabled.
4367 1: DDR-DLL shut-down feature enabled.
4368 Bit[2]=0: DDR-PLL Power down feature disabled.
4369 1: DDR-PLL Power down feature enabled.
4371 usNBP0Voltage: VID for voltage on NB P0 State
4372 usNBP1Voltage: VID for voltage on NB P1 State
4373 usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
4374 usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
4375 usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
4376 to indicate a range.
4377 SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
4378 SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
4379 SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
4380 SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
4381 ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
4382 ucUMAChannelNumber: System memory channel numbers.
4383 ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default
4384 ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback.
4385 ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
4386 sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high
4387 ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
4388 ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
4389 ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
4390 ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
4391 ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
4392 usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
4393 usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
4394 usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
4395 usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
4396 usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
4397 usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
4398 usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
4399 usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
4400 **********************************************************************************************************************/
4402 /**************************************************************************/
4403 // This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
4404 //Memory SS Info Table
4405 //Define Memory Clock SS chip ID
4409 //Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol
4410 typedef struct _ATOM_I2C_DATA_RECORD
4412 UCHAR ucNunberOfBytes; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
4413 UCHAR ucI2CData[1]; //I2C data in bytes, should be less than 16 bytes usually
4414 }ATOM_I2C_DATA_RECORD;
4417 //Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information
4418 typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
4420 ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //I2C line and HW/SW assisted cap.
4421 UCHAR ucSSChipID; //SS chip being used
4422 UCHAR ucSSChipSlaveAddr; //Slave Address to set up this SS chip
4423 UCHAR ucNumOfI2CDataRecords; //number of data block
4424 ATOM_I2C_DATA_RECORD asI2CData[1];
4425 }ATOM_I2C_DEVICE_SETUP_INFO;
4427 //==========================================================================================
4428 typedef struct _ATOM_ASIC_MVDD_INFO
4430 ATOM_COMMON_TABLE_HEADER sHeader;
4431 ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1];
4432 }ATOM_ASIC_MVDD_INFO;
4434 //==========================================================================================
4435 #define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO
4437 //==========================================================================================
4438 /**************************************************************************/
4440 typedef struct _ATOM_ASIC_SS_ASSIGNMENT
4442 ULONG ulTargetClockRange; //Clock Out frequence (VCO ), in unit of 10Khz
4443 USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
4444 USHORT usSpreadRateInKhz; //in unit of kHz, modulation freq
4445 UCHAR ucClockIndication; //Indicate which clock source needs SS
4446 UCHAR ucSpreadSpectrumMode; //Bit1=0 Down Spread,=1 Center Spread.
4447 UCHAR ucReserved[2];
4448 }ATOM_ASIC_SS_ASSIGNMENT;
4450 //Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type.
4451 //SS is not required or enabled if a match is not found.
4452 #define ASIC_INTERNAL_MEMORY_SS 1
4453 #define ASIC_INTERNAL_ENGINE_SS 2
4454 #define ASIC_INTERNAL_UVD_SS 3
4455 #define ASIC_INTERNAL_SS_ON_TMDS 4
4456 #define ASIC_INTERNAL_SS_ON_HDMI 5
4457 #define ASIC_INTERNAL_SS_ON_LVDS 6
4458 #define ASIC_INTERNAL_SS_ON_DP 7
4459 #define ASIC_INTERNAL_SS_ON_DCPLL 8
4460 #define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
4462 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
4464 ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
4465 //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
4466 USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
4467 USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq
4468 UCHAR ucClockIndication; //Indicate which clock source needs SS
4469 UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
4470 UCHAR ucReserved[2];
4471 }ATOM_ASIC_SS_ASSIGNMENT_V2;
4473 //ucSpreadSpectrumMode
4474 //#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
4475 //#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
4476 //#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
4477 //#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
4478 //#define ATOM_INTERNAL_SS_MASK 0x00000000
4479 //#define ATOM_EXTERNAL_SS_MASK 0x00000002
4481 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO
4483 ATOM_COMMON_TABLE_HEADER sHeader;
4484 ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4];
4485 }ATOM_ASIC_INTERNAL_SS_INFO;
4487 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2
4489 ATOM_COMMON_TABLE_HEADER sHeader;
4490 ATOM_ASIC_SS_ASSIGNMENT_V2 asSpreadSpectrum[1]; //this is point only.
4491 }ATOM_ASIC_INTERNAL_SS_INFO_V2;
4493 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3
4495 ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
4496 //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
4497 USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
4498 USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq
4499 UCHAR ucClockIndication; //Indicate which clock source needs SS
4500 UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
4501 UCHAR ucReserved[2];
4502 }ATOM_ASIC_SS_ASSIGNMENT_V3;
4504 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
4506 ATOM_COMMON_TABLE_HEADER sHeader;
4507 ATOM_ASIC_SS_ASSIGNMENT_V3 asSpreadSpectrum[1]; //this is pointer only.
4508 }ATOM_ASIC_INTERNAL_SS_INFO_V3;
4511 //==============================Scratch Pad Definition Portion===============================
4512 #define ATOM_DEVICE_CONNECT_INFO_DEF 0
4513 #define ATOM_ROM_LOCATION_DEF 1
4514 #define ATOM_TV_STANDARD_DEF 2
4515 #define ATOM_ACTIVE_INFO_DEF 3
4516 #define ATOM_LCD_INFO_DEF 4
4517 #define ATOM_DOS_REQ_INFO_DEF 5
4518 #define ATOM_ACC_CHANGE_INFO_DEF 6
4519 #define ATOM_DOS_MODE_INFO_DEF 7
4520 #define ATOM_I2C_CHANNEL_STATUS_DEF 8
4521 #define ATOM_I2C_CHANNEL_STATUS1_DEF 9
4524 // BIOS_0_SCRATCH Definition
4525 #define ATOM_S0_CRT1_MONO 0x00000001L
4526 #define ATOM_S0_CRT1_COLOR 0x00000002L
4527 #define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
4529 #define ATOM_S0_TV1_COMPOSITE_A 0x00000004L
4530 #define ATOM_S0_TV1_SVIDEO_A 0x00000008L
4531 #define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
4533 #define ATOM_S0_CV_A 0x00000010L
4534 #define ATOM_S0_CV_DIN_A 0x00000020L
4535 #define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
4538 #define ATOM_S0_CRT2_MONO 0x00000100L
4539 #define ATOM_S0_CRT2_COLOR 0x00000200L
4540 #define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
4542 #define ATOM_S0_TV1_COMPOSITE 0x00000400L
4543 #define ATOM_S0_TV1_SVIDEO 0x00000800L
4544 #define ATOM_S0_TV1_SCART 0x00004000L
4545 #define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
4547 #define ATOM_S0_CV 0x00001000L
4548 #define ATOM_S0_CV_DIN 0x00002000L
4549 #define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN)
4551 #define ATOM_S0_DFP1 0x00010000L
4552 #define ATOM_S0_DFP2 0x00020000L
4553 #define ATOM_S0_LCD1 0x00040000L
4554 #define ATOM_S0_LCD2 0x00080000L
4555 #define ATOM_S0_DFP6 0x00100000L
4556 #define ATOM_S0_DFP3 0x00200000L
4557 #define ATOM_S0_DFP4 0x00400000L
4558 #define ATOM_S0_DFP5 0x00800000L
4560 #define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 | ATOM_S0_DFP6
4562 #define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with
4563 // the FAD/HDP reg access bug. Bit is read by DAL, this is obsolete from RV5xx
4565 #define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L
4566 #define ATOM_S0_THERMAL_STATE_SHIFT 26
4568 #define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
4569 #define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
4571 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
4572 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
4573 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
4574 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
4576 //Byte aligned definition for BIOS usage
4577 #define ATOM_S0_CRT1_MONOb0 0x01
4578 #define ATOM_S0_CRT1_COLORb0 0x02
4579 #define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
4581 #define ATOM_S0_TV1_COMPOSITEb0 0x04
4582 #define ATOM_S0_TV1_SVIDEOb0 0x08
4583 #define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
4585 #define ATOM_S0_CVb0 0x10
4586 #define ATOM_S0_CV_DINb0 0x20
4587 #define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
4589 #define ATOM_S0_CRT2_MONOb1 0x01
4590 #define ATOM_S0_CRT2_COLORb1 0x02
4591 #define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
4593 #define ATOM_S0_TV1_COMPOSITEb1 0x04
4594 #define ATOM_S0_TV1_SVIDEOb1 0x08
4595 #define ATOM_S0_TV1_SCARTb1 0x40
4596 #define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
4598 #define ATOM_S0_CVb1 0x10
4599 #define ATOM_S0_CV_DINb1 0x20
4600 #define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
4602 #define ATOM_S0_DFP1b2 0x01
4603 #define ATOM_S0_DFP2b2 0x02
4604 #define ATOM_S0_LCD1b2 0x04
4605 #define ATOM_S0_LCD2b2 0x08
4606 #define ATOM_S0_DFP6b2 0x10
4607 #define ATOM_S0_DFP3b2 0x20
4608 #define ATOM_S0_DFP4b2 0x40
4609 #define ATOM_S0_DFP5b2 0x80
4612 #define ATOM_S0_THERMAL_STATE_MASKb3 0x1C
4613 #define ATOM_S0_THERMAL_STATE_SHIFTb3 2
4615 #define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
4616 #define ATOM_S0_LCD1_SHIFT 18
4618 // BIOS_1_SCRATCH Definition
4619 #define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL
4620 #define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L
4622 // BIOS_2_SCRATCH Definition
4623 #define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL
4624 #define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L
4625 #define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8
4627 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L
4628 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
4629 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L
4631 #define ATOM_S2_DEVICE_DPMS_STATE 0x00010000L
4632 #define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L
4634 #define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0
4635 #define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1
4636 #define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2
4637 #define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3
4638 #define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
4639 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
4642 //Byte aligned definition for BIOS usage
4643 #define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
4644 #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
4645 #define ATOM_S2_DEVICE_DPMS_STATEb2 0x01
4647 #define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF
4648 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C
4649 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10
4650 #define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
4651 #define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
4654 // BIOS_3_SCRATCH Definition
4655 #define ATOM_S3_CRT1_ACTIVE 0x00000001L
4656 #define ATOM_S3_LCD1_ACTIVE 0x00000002L
4657 #define ATOM_S3_TV1_ACTIVE 0x00000004L
4658 #define ATOM_S3_DFP1_ACTIVE 0x00000008L
4659 #define ATOM_S3_CRT2_ACTIVE 0x00000010L
4660 #define ATOM_S3_LCD2_ACTIVE 0x00000020L
4661 #define ATOM_S3_DFP6_ACTIVE 0x00000040L
4662 #define ATOM_S3_DFP2_ACTIVE 0x00000080L
4663 #define ATOM_S3_CV_ACTIVE 0x00000100L
4664 #define ATOM_S3_DFP3_ACTIVE 0x00000200L
4665 #define ATOM_S3_DFP4_ACTIVE 0x00000400L
4666 #define ATOM_S3_DFP5_ACTIVE 0x00000800L
4668 #define ATOM_S3_DEVICE_ACTIVE_MASK 0x00000FFFL
4670 #define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L
4671 #define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
4673 #define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L
4674 #define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L
4675 #define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L
4676 #define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L
4677 #define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L
4678 #define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L
4679 #define ATOM_S3_DFP6_CRTC_ACTIVE 0x00400000L
4680 #define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L
4681 #define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L
4682 #define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L
4683 #define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L
4684 #define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L
4686 #define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
4687 #define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L
4688 //Below two definitions are not supported in pplib, but in the old powerplay in DAL
4689 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
4690 #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
4692 //Byte aligned definition for BIOS usage
4693 #define ATOM_S3_CRT1_ACTIVEb0 0x01
4694 #define ATOM_S3_LCD1_ACTIVEb0 0x02
4695 #define ATOM_S3_TV1_ACTIVEb0 0x04
4696 #define ATOM_S3_DFP1_ACTIVEb0 0x08
4697 #define ATOM_S3_CRT2_ACTIVEb0 0x10
4698 #define ATOM_S3_LCD2_ACTIVEb0 0x20
4699 #define ATOM_S3_DFP6_ACTIVEb0 0x40
4700 #define ATOM_S3_DFP2_ACTIVEb0 0x80
4701 #define ATOM_S3_CV_ACTIVEb1 0x01
4702 #define ATOM_S3_DFP3_ACTIVEb1 0x02
4703 #define ATOM_S3_DFP4_ACTIVEb1 0x04
4704 #define ATOM_S3_DFP5_ACTIVEb1 0x08
4706 #define ATOM_S3_ACTIVE_CRTC1w0 0xFFF
4708 #define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01
4709 #define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02
4710 #define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04
4711 #define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08
4712 #define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10
4713 #define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20
4714 #define ATOM_S3_DFP6_CRTC_ACTIVEb2 0x40
4715 #define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80
4716 #define ATOM_S3_CV_CRTC_ACTIVEb3 0x01
4717 #define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02
4718 #define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04
4719 #define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08
4721 #define ATOM_S3_ACTIVE_CRTC2w1 0xFFF
4723 // BIOS_4_SCRATCH Definition
4724 #define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL
4725 #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
4726 #define ATOM_S4_LCD1_REFRESH_SHIFT 8
4728 //Byte aligned definition for BIOS usage
4729 #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
4730 #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
4731 #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
4733 // BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!!
4734 #define ATOM_S5_DOS_REQ_CRT1b0 0x01
4735 #define ATOM_S5_DOS_REQ_LCD1b0 0x02
4736 #define ATOM_S5_DOS_REQ_TV1b0 0x04
4737 #define ATOM_S5_DOS_REQ_DFP1b0 0x08
4738 #define ATOM_S5_DOS_REQ_CRT2b0 0x10
4739 #define ATOM_S5_DOS_REQ_LCD2b0 0x20
4740 #define ATOM_S5_DOS_REQ_DFP6b0 0x40
4741 #define ATOM_S5_DOS_REQ_DFP2b0 0x80
4742 #define ATOM_S5_DOS_REQ_CVb1 0x01
4743 #define ATOM_S5_DOS_REQ_DFP3b1 0x02
4744 #define ATOM_S5_DOS_REQ_DFP4b1 0x04
4745 #define ATOM_S5_DOS_REQ_DFP5b1 0x08
4747 #define ATOM_S5_DOS_REQ_DEVICEw0 0x0FFF
4749 #define ATOM_S5_DOS_REQ_CRT1 0x0001
4750 #define ATOM_S5_DOS_REQ_LCD1 0x0002
4751 #define ATOM_S5_DOS_REQ_TV1 0x0004
4752 #define ATOM_S5_DOS_REQ_DFP1 0x0008
4753 #define ATOM_S5_DOS_REQ_CRT2 0x0010
4754 #define ATOM_S5_DOS_REQ_LCD2 0x0020
4755 #define ATOM_S5_DOS_REQ_DFP6 0x0040
4756 #define ATOM_S5_DOS_REQ_DFP2 0x0080
4757 #define ATOM_S5_DOS_REQ_CV 0x0100
4758 #define ATOM_S5_DOS_REQ_DFP3 0x0200
4759 #define ATOM_S5_DOS_REQ_DFP4 0x0400
4760 #define ATOM_S5_DOS_REQ_DFP5 0x0800
4762 #define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0
4763 #define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0
4764 #define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0
4765 #define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1
4766 #define ATOM_S5_DOS_FORCE_DEVICEw1 (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\
4767 (ATOM_S5_DOS_FORCE_CVb3<<8))
4769 // BIOS_6_SCRATCH Definition
4770 #define ATOM_S6_DEVICE_CHANGE 0x00000001L
4771 #define ATOM_S6_SCALER_CHANGE 0x00000002L
4772 #define ATOM_S6_LID_CHANGE 0x00000004L
4773 #define ATOM_S6_DOCKING_CHANGE 0x00000008L
4774 #define ATOM_S6_ACC_MODE 0x00000010L
4775 #define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L
4776 #define ATOM_S6_LID_STATE 0x00000040L
4777 #define ATOM_S6_DOCK_STATE 0x00000080L
4778 #define ATOM_S6_CRITICAL_STATE 0x00000100L
4779 #define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L
4780 #define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L
4781 #define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L
4782 #define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L //Normal expansion Request bit for LCD
4783 #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L //Aspect ratio expansion Request bit for LCD
4785 #define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion
4786 #define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion
4788 #define ATOM_S6_ACC_REQ_CRT1 0x00010000L
4789 #define ATOM_S6_ACC_REQ_LCD1 0x00020000L
4790 #define ATOM_S6_ACC_REQ_TV1 0x00040000L
4791 #define ATOM_S6_ACC_REQ_DFP1 0x00080000L
4792 #define ATOM_S6_ACC_REQ_CRT2 0x00100000L
4793 #define ATOM_S6_ACC_REQ_LCD2 0x00200000L
4794 #define ATOM_S6_ACC_REQ_DFP6 0x00400000L
4795 #define ATOM_S6_ACC_REQ_DFP2 0x00800000L
4796 #define ATOM_S6_ACC_REQ_CV 0x01000000L
4797 #define ATOM_S6_ACC_REQ_DFP3 0x02000000L
4798 #define ATOM_S6_ACC_REQ_DFP4 0x04000000L
4799 #define ATOM_S6_ACC_REQ_DFP5 0x08000000L
4801 #define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L
4802 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L
4803 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L
4804 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
4805 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
4807 //Byte aligned definition for BIOS usage
4808 #define ATOM_S6_DEVICE_CHANGEb0 0x01
4809 #define ATOM_S6_SCALER_CHANGEb0 0x02
4810 #define ATOM_S6_LID_CHANGEb0 0x04
4811 #define ATOM_S6_DOCKING_CHANGEb0 0x08
4812 #define ATOM_S6_ACC_MODEb0 0x10
4813 #define ATOM_S6_EXT_DESKTOP_MODEb0 0x20
4814 #define ATOM_S6_LID_STATEb0 0x40
4815 #define ATOM_S6_DOCK_STATEb0 0x80
4816 #define ATOM_S6_CRITICAL_STATEb1 0x01
4817 #define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02
4818 #define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04
4819 #define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
4820 #define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10
4821 #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
4823 #define ATOM_S6_ACC_REQ_CRT1b2 0x01
4824 #define ATOM_S6_ACC_REQ_LCD1b2 0x02
4825 #define ATOM_S6_ACC_REQ_TV1b2 0x04
4826 #define ATOM_S6_ACC_REQ_DFP1b2 0x08
4827 #define ATOM_S6_ACC_REQ_CRT2b2 0x10
4828 #define ATOM_S6_ACC_REQ_LCD2b2 0x20
4829 #define ATOM_S6_ACC_REQ_DFP6b2 0x40
4830 #define ATOM_S6_ACC_REQ_DFP2b2 0x80
4831 #define ATOM_S6_ACC_REQ_CVb3 0x01
4832 #define ATOM_S6_ACC_REQ_DFP3b3 0x02
4833 #define ATOM_S6_ACC_REQ_DFP4b3 0x04
4834 #define ATOM_S6_ACC_REQ_DFP5b3 0x08
4836 #define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0
4837 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
4838 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
4839 #define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40
4840 #define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80
4842 #define ATOM_S6_DEVICE_CHANGE_SHIFT 0
4843 #define ATOM_S6_SCALER_CHANGE_SHIFT 1
4844 #define ATOM_S6_LID_CHANGE_SHIFT 2
4845 #define ATOM_S6_DOCKING_CHANGE_SHIFT 3
4846 #define ATOM_S6_ACC_MODE_SHIFT 4
4847 #define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5
4848 #define ATOM_S6_LID_STATE_SHIFT 6
4849 #define ATOM_S6_DOCK_STATE_SHIFT 7
4850 #define ATOM_S6_CRITICAL_STATE_SHIFT 8
4851 #define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9
4852 #define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10
4853 #define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11
4854 #define ATOM_S6_REQ_SCALER_SHIFT 12
4855 #define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13
4856 #define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14
4857 #define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15
4858 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28
4859 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29
4860 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30
4861 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31
4863 // BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!!
4864 #define ATOM_S7_DOS_MODE_TYPEb0 0x03
4865 #define ATOM_S7_DOS_MODE_VGAb0 0x00
4866 #define ATOM_S7_DOS_MODE_VESAb0 0x01
4867 #define ATOM_S7_DOS_MODE_EXTb0 0x02
4868 #define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
4869 #define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
4870 #define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
4871 #define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
4873 #define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
4875 // BIOS_8_SCRATCH Definition
4876 #define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF
4877 #define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000
4879 #define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0
4880 #define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16
4882 // BIOS_9_SCRATCH Definition
4883 #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
4884 #define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF
4886 #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
4887 #define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000
4889 #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
4890 #define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
4892 #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
4893 #define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16
4897 #define ATOM_FLAG_SET 0x20
4898 #define ATOM_FLAG_CLEAR 0
4899 #define CLEAR_ATOM_S6_ACC_MODE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
4900 #define SET_ATOM_S6_DEVICE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
4901 #define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
4902 #define SET_ATOM_S6_SCALER_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
4903 #define SET_ATOM_S6_LID_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
4905 #define SET_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
4906 #define CLEAR_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
4908 #define SET_ATOM_S6_DOCK_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
4909 #define SET_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
4910 #define CLEAR_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
4912 #define SET_ATOM_S6_THERMAL_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
4913 #define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
4914 #define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
4916 #define SET_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
4917 #define CLEAR_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
4919 #define SET_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
4920 #define CLEAR_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
4922 #define SET_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
4923 #define CLEAR_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
4925 #define SET_ATOM_S6_I2C_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
4927 #define SET_ATOM_S6_DISPLAY_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
4929 #define SET_ATOM_S6_DEVICE_RECONFIG ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
4930 #define CLEAR_ATOM_S0_LCD1 ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )| ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
4931 #define SET_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
4932 #define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
4934 /****************************************************************************/
4935 //Portion II: Definitinos only used in Driver
4936 /****************************************************************************/
4938 // Macros used by driver
4940 #define GetIndexIntoMasterTable(MasterOrData, FieldName) ((reinterpret_cast<char*>(&(static_cast<ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*>(0))->FieldName)-static_cast<char*>(0))/sizeof(USHORT))
4942 #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableFormatRevision )&0x3F)
4943 #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableContentRevision)&0x3F)
4944 #else // not __cplusplus
4945 #define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char*)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*)0)->FieldName)-(char*)0)/sizeof(USHORT))
4947 #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
4948 #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
4949 #endif // __cplusplus
4951 #define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
4952 #define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
4954 /****************************************************************************/
4955 //Portion III: Definitinos only used in VBIOS
4956 /****************************************************************************/
4957 #define ATOM_DAC_SRC 0x80
4958 #define ATOM_SRC_DAC1 0
4959 #define ATOM_SRC_DAC2 0x80
4961 typedef struct _MEMORY_PLLINIT_PARAMETERS
4963 ULONG ulTargetMemoryClock; //In 10Khz unit
4964 UCHAR ucAction; //not define yet
4965 UCHAR ucFbDiv_Hi; //Fbdiv Hi byte
4966 UCHAR ucFbDiv; //FB value
4967 UCHAR ucPostDiv; //Post div
4968 }MEMORY_PLLINIT_PARAMETERS;
4970 #define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS
4973 #define GPIO_PIN_WRITE 0x01
4974 #define GPIO_PIN_READ 0x00
4976 typedef struct _GPIO_PIN_CONTROL_PARAMETERS
4978 UCHAR ucGPIO_ID; //return value, read from GPIO pins
4979 UCHAR ucGPIOBitShift; //define which bit in uGPIOBitVal need to be update
4980 UCHAR ucGPIOBitVal; //Set/Reset corresponding bit defined in ucGPIOBitMask
4981 UCHAR ucAction; //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write
4982 }GPIO_PIN_CONTROL_PARAMETERS;
4984 typedef struct _ENABLE_SCALER_PARAMETERS
4986 UCHAR ucScaler; // ATOM_SCALER1, ATOM_SCALER2
4987 UCHAR ucEnable; // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION
4988 UCHAR ucTVStandard; //
4990 }ENABLE_SCALER_PARAMETERS;
4991 #define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
4994 #define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0
4995 #define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1
4996 #define SCALER_ENABLE_2TAP_ALPHA_MODE 2
4997 #define SCALER_ENABLE_MULTITAP_MODE 3
4999 typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS
5001 ULONG usHWIconHorzVertPosn; // Hardware Icon Vertical position
5002 UCHAR ucHWIconVertOffset; // Hardware Icon Vertical offset
5003 UCHAR ucHWIconHorzOffset; // Hardware Icon Horizontal offset
5004 UCHAR ucSelection; // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2
5005 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
5006 }ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
5008 typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION
5010 ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon;
5011 ENABLE_CRTC_PARAMETERS sReserved;
5012 }ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
5014 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
5016 USHORT usHight; // Image Hight
5017 USHORT usWidth; // Image Width
5018 UCHAR ucSurface; // Surface 1 or 2
5020 }ENABLE_GRAPH_SURFACE_PARAMETERS;
5022 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
5024 USHORT usHight; // Image Hight
5025 USHORT usWidth; // Image Width
5026 UCHAR ucSurface; // Surface 1 or 2
5027 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
5029 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
5031 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
5033 USHORT usHight; // Image Hight
5034 USHORT usWidth; // Image Width
5035 UCHAR ucSurface; // Surface 1 or 2
5036 UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
5037 USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0.
5038 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
5040 typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
5042 ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
5043 ENABLE_YUV_PS_ALLOCATION sReserved; // Don't set this one
5044 }ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
5046 typedef struct _MEMORY_CLEAN_UP_PARAMETERS
5048 USHORT usMemoryStart; //in 8Kb boundary, offset from memory base address
5049 USHORT usMemorySize; //8Kb blocks aligned
5050 }MEMORY_CLEAN_UP_PARAMETERS;
5051 #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
5053 typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
5055 USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC
5057 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
5059 typedef struct _INDIRECT_IO_ACCESS
5061 ATOM_COMMON_TABLE_HEADER sHeader;
5062 UCHAR IOAccessSequence[256];
5063 } INDIRECT_IO_ACCESS;
5065 #define INDIRECT_READ 0x00
5066 #define INDIRECT_WRITE 0x80
5068 #define INDIRECT_IO_MM 0
5069 #define INDIRECT_IO_PLL 1
5070 #define INDIRECT_IO_MC 2
5071 #define INDIRECT_IO_PCIE 3
5072 #define INDIRECT_IO_PCIEP 4
5073 #define INDIRECT_IO_NBMISC 5
5075 #define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
5076 #define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
5077 #define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ
5078 #define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE
5079 #define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ
5080 #define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE
5081 #define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ
5082 #define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
5083 #define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
5084 #define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
5086 typedef struct _ATOM_OEM_INFO
5088 ATOM_COMMON_TABLE_HEADER sHeader;
5089 ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
5092 typedef struct _ATOM_TV_MODE
5094 UCHAR ucVMode_Num; //Video mode number
5095 UCHAR ucTV_Mode_Num; //Internal TV mode number
5098 typedef struct _ATOM_BIOS_INT_TVSTD_MODE
5100 ATOM_COMMON_TABLE_HEADER sHeader;
5101 USHORT usTV_Mode_LUT_Offset; // Pointer to standard to internal number conversion table
5102 USHORT usTV_FIFO_Offset; // Pointer to FIFO entry table
5103 USHORT usNTSC_Tbl_Offset; // Pointer to SDTV_Mode_NTSC table
5104 USHORT usPAL_Tbl_Offset; // Pointer to SDTV_Mode_PAL table
5105 USHORT usCV_Tbl_Offset; // Pointer to SDTV_Mode_PAL table
5106 }ATOM_BIOS_INT_TVSTD_MODE;
5109 typedef struct _ATOM_TV_MODE_SCALER_PTR
5111 USHORT ucFilter0_Offset; //Pointer to filter format 0 coefficients
5112 USHORT usFilter1_Offset; //Pointer to filter format 0 coefficients
5113 UCHAR ucTV_Mode_Num;
5114 }ATOM_TV_MODE_SCALER_PTR;
5116 typedef struct _ATOM_STANDARD_VESA_TIMING
5118 ATOM_COMMON_TABLE_HEADER sHeader;
5119 ATOM_DTD_FORMAT aModeTimings[16]; // 16 is not the real array number, just for initial allocation
5120 }ATOM_STANDARD_VESA_TIMING;
5123 typedef struct _ATOM_STD_FORMAT
5127 USHORT usSTD_RefreshRate;
5131 typedef struct _ATOM_VESA_TO_EXTENDED_MODE
5133 USHORT usVESA_ModeNumber;
5134 USHORT usExtendedModeNumber;
5135 }ATOM_VESA_TO_EXTENDED_MODE;
5137 typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT
5139 ATOM_COMMON_TABLE_HEADER sHeader;
5140 ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
5141 }ATOM_VESA_TO_INTENAL_MODE_LUT;
5143 /*************** ATOM Memory Related Data Structure ***********************/
5144 typedef struct _ATOM_MEMORY_VENDOR_BLOCK{
5146 UCHAR ucMemoryVendor;
5149 ULONG ulDllResetClkRange;
5150 }ATOM_MEMORY_VENDOR_BLOCK;
5153 typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{
5156 ULONG ulMemClockRange:24;
5158 ULONG ulMemClockRange:24;
5161 }ATOM_MEMORY_SETTING_ID_CONFIG;
5163 typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS
5165 ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
5167 }ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
5170 typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{
5171 ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID;
5172 ULONG aulMemData[1];
5173 }ATOM_MEMORY_SETTING_DATA_BLOCK;
5176 typedef struct _ATOM_INIT_REG_INDEX_FORMAT{
5177 USHORT usRegIndex; // MC register index
5178 UCHAR ucPreRegDataLength; // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf
5179 }ATOM_INIT_REG_INDEX_FORMAT;
5182 typedef struct _ATOM_INIT_REG_BLOCK{
5183 USHORT usRegIndexTblSize; //size of asRegIndexBuf
5184 USHORT usRegDataBlkSize; //size of ATOM_MEMORY_SETTING_DATA_BLOCK
5185 ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1];
5186 ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1];
5187 }ATOM_INIT_REG_BLOCK;
5189 #define END_OF_REG_INDEX_BLOCK 0x0ffff
5190 #define END_OF_REG_DATA_BLOCK 0x00000000
5191 #define ATOM_INIT_REG_MASK_FLAG 0x80
5192 #define CLOCK_RANGE_HIGHEST 0x00ffffff
5194 #define VALUE_DWORD SIZEOF ULONG
5195 #define VALUE_SAME_AS_ABOVE 0
5196 #define VALUE_MASK_DWORD 0x84
5198 #define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
5199 #define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
5200 #define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
5201 //#define ACCESS_MCIODEBUGIND 0x40 //defined in BIOS code
5202 #define ACCESS_PLACEHOLDER 0x80
5204 typedef struct _ATOM_MC_INIT_PARAM_TABLE
5206 ATOM_COMMON_TABLE_HEADER sHeader;
5207 USHORT usAdjustARB_SEQDataOffset;
5208 USHORT usMCInitMemTypeTblOffset;
5209 USHORT usMCInitCommonTblOffset;
5210 USHORT usMCInitPowerDownTblOffset;
5211 ULONG ulARB_SEQDataBuf[32];
5212 ATOM_INIT_REG_BLOCK asMCInitMemType;
5213 ATOM_INIT_REG_BLOCK asMCInitCommon;
5214 }ATOM_MC_INIT_PARAM_TABLE;
5221 #define _16Mx16 0x22
5222 #define _16Mx32 0x23
5223 #define _32Mx16 0x32
5224 #define _32Mx32 0x33
5226 #define _64Mx16 0x42
5227 #define _64Mx32 0x43
5228 #define _128Mx8 0x51
5229 #define _128Mx16 0x52
5230 #define _256Mx8 0x61
5233 #define INFINEON 0x2
5243 #define QIMONDA INFINEON
5244 #define PROMOS MOSEL
5245 #define KRETON INFINEON
5246 #define ELIXIR NANYA
5248 /////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
5250 #define UCODE_ROM_START_ADDRESS 0x1b800
5251 #define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode
5253 //uCode block header for reference
5255 typedef struct _MCuCodeHeader
5262 USHORT usParametersLength;
5263 USHORT usUCodeLength;
5268 //////////////////////////////////////////////////////////////////////////////////
5270 #define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16
5272 #define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF
5273 typedef struct _ATOM_VRAM_MODULE_V1
5279 UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
5280 UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved;
5281 UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender
5282 UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
5283 UCHAR ucRow; // Number of Row,in power of 2;
5284 UCHAR ucColumn; // Number of Column,in power of 2;
5285 UCHAR ucBank; // Nunber of Bank;
5286 UCHAR ucRank; // Number of Rank, in power of 2
5287 UCHAR ucChannelNum; // Number of channel;
5288 UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
5289 UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
5290 UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
5291 UCHAR ucReserved[2];
5292 }ATOM_VRAM_MODULE_V1;
5295 typedef struct _ATOM_VRAM_MODULE_V2
5298 ULONG ulFlags; // To enable/disable functionalities based on memory type
5299 ULONG ulEngineClock; // Override of default engine clock for particular memory type
5300 ULONG ulMemoryClock; // Override of default memory clock for particular memory type
5301 USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
5302 USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
5306 UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
5307 UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
5308 UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
5309 UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
5310 UCHAR ucRow; // Number of Row,in power of 2;
5311 UCHAR ucColumn; // Number of Column,in power of 2;
5312 UCHAR ucBank; // Nunber of Bank;
5313 UCHAR ucRank; // Number of Rank, in power of 2
5314 UCHAR ucChannelNum; // Number of channel;
5315 UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
5316 UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
5317 UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
5318 UCHAR ucRefreshRateFactor;
5319 UCHAR ucReserved[3];
5320 }ATOM_VRAM_MODULE_V2;
5323 typedef struct _ATOM_MEMORY_TIMING_FORMAT
5325 ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
5327 USHORT usMRS; // mode register
5331 USHORT usEMRS; // extended mode register
5334 UCHAR ucCL; // CAS latency
5335 UCHAR ucWL; // WRITE Latency
5336 UCHAR uctRAS; // tRAS
5338 UCHAR uctRFC; // tRFC
5339 UCHAR uctRCDR; // tRCDR
5340 UCHAR uctRCDW; // tRCDW
5342 UCHAR uctRRD; // tRRD
5344 UCHAR uctWTR; // tWTR
5345 UCHAR uctPDIX; // tPDIX
5346 UCHAR uctFAW; // tFAW
5347 UCHAR uctAOND; // tAOND
5351 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
5356 }ATOM_MEMORY_TIMING_FORMAT;
5359 typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1
5361 ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
5362 USHORT usMRS; // mode register
5363 USHORT usEMRS; // extended mode register
5364 UCHAR ucCL; // CAS latency
5365 UCHAR ucWL; // WRITE Latency
5366 UCHAR uctRAS; // tRAS
5368 UCHAR uctRFC; // tRFC
5369 UCHAR uctRCDR; // tRCDR
5370 UCHAR uctRCDW; // tRCDW
5372 UCHAR uctRRD; // tRRD
5374 UCHAR uctWTR; // tWTR
5375 UCHAR uctPDIX; // tPDIX
5376 UCHAR uctFAW; // tFAW
5377 UCHAR uctAOND; // tAOND
5378 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
5379 ////////////////////////////////////GDDR parameters///////////////////////////////////
5390 }ATOM_MEMORY_TIMING_FORMAT_V1;
5392 typedef struct _ATOM_MEMORY_TIMING_FORMAT_V2
5394 ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
5395 USHORT usMRS; // mode register
5396 USHORT usEMRS; // extended mode register
5397 UCHAR ucCL; // CAS latency
5398 UCHAR ucWL; // WRITE Latency
5399 UCHAR uctRAS; // tRAS
5401 UCHAR uctRFC; // tRFC
5402 UCHAR uctRCDR; // tRCDR
5403 UCHAR uctRCDW; // tRCDW
5405 UCHAR uctRRD; // tRRD
5407 UCHAR uctWTR; // tWTR
5408 UCHAR uctPDIX; // tPDIX
5409 UCHAR uctFAW; // tFAW
5410 UCHAR uctAOND; // tAOND
5411 UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
5412 ////////////////////////////////////GDDR parameters///////////////////////////////////
5426 }ATOM_MEMORY_TIMING_FORMAT_V2;
5428 typedef struct _ATOM_MEMORY_FORMAT
5430 ULONG ulDllDisClock; // memory DLL will be disable when target memory clock is below this clock
5432 USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
5433 USHORT usDDR3_Reserved; // Not used for DDR3 memory
5436 USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
5437 USHORT usDDR3_MR3; // Used for DDR3 memory
5439 UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
5440 UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
5441 UCHAR ucRow; // Number of Row,in power of 2;
5442 UCHAR ucColumn; // Number of Column,in power of 2;
5443 UCHAR ucBank; // Nunber of Bank;
5444 UCHAR ucRank; // Number of Rank, in power of 2
5445 UCHAR ucBurstSize; // burst size, 0= burst size=4 1= burst size=8
5446 UCHAR ucDllDisBit; // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register )
5447 UCHAR ucRefreshRateFactor; // memory refresh rate in unit of ms
5448 UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
5449 UCHAR ucPreamble; //[7:4] Write Preamble, [3:0] Read Preamble
5450 UCHAR ucMemAttrib; // Memory Device Addribute, like RDBI/WDBI etc
5451 ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; //Memory Timing block sort from lower clock to higher clock
5452 }ATOM_MEMORY_FORMAT;
5455 typedef struct _ATOM_VRAM_MODULE_V3
5457 ULONG ulChannelMapCfg; // board dependent paramenter:Channel combination
5458 USHORT usSize; // size of ATOM_VRAM_MODULE_V3
5459 USHORT usDefaultMVDDQ; // board dependent parameter:Default Memory Core Voltage
5460 USHORT usDefaultMVDDC; // board dependent parameter:Default Memory IO Voltage
5461 UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
5462 UCHAR ucChannelNum; // board dependent parameter:Number of channel;
5463 UCHAR ucChannelSize; // board dependent parameter:32bit or 64bit
5464 UCHAR ucVREFI; // board dependnt parameter: EXT or INT +160mv to -140mv
5465 UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
5466 UCHAR ucFlag; // To enable/disable functionalities based on memory type
5467 ATOM_MEMORY_FORMAT asMemory; // describ all of video memory parameters from memory spec
5468 }ATOM_VRAM_MODULE_V3;
5471 //ATOM_VRAM_MODULE_V3.ucNPL_RT
5472 #define NPL_RT_MASK 0x0f
5473 #define BATTERY_ODT_MASK 0xc0
5475 #define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3
5477 typedef struct _ATOM_VRAM_MODULE_V4
5479 ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
5480 USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
5481 USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
5482 // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
5484 UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
5485 UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
5486 UCHAR ucChannelNum; // Number of channels present in this module config
5487 UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
5488 UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
5489 UCHAR ucFlag; // To enable/disable functionalities based on memory type
5490 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
5491 UCHAR ucVREFI; // board dependent parameter
5492 UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
5493 UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
5494 UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
5495 // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
5496 UCHAR ucReserved[3];
5498 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
5500 USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
5501 USHORT usDDR3_Reserved;
5504 USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
5505 USHORT usDDR3_MR3; // Used for DDR3 memory
5507 UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
5508 UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
5509 UCHAR ucReserved2[2];
5510 ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
5511 }ATOM_VRAM_MODULE_V4;
5513 #define VRAM_MODULE_V4_MISC_RANK_MASK 0x3
5514 #define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1
5515 #define VRAM_MODULE_V4_MISC_BL_MASK 0x4
5516 #define VRAM_MODULE_V4_MISC_BL8 0x4
5517 #define VRAM_MODULE_V4_MISC_DUAL_CS 0x10
5519 typedef struct _ATOM_VRAM_MODULE_V5
5521 ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
5522 USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
5523 USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
5524 // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
5526 UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
5527 UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
5528 UCHAR ucChannelNum; // Number of channels present in this module config
5529 UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
5530 UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
5531 UCHAR ucFlag; // To enable/disable functionalities based on memory type
5532 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
5533 UCHAR ucVREFI; // board dependent parameter
5534 UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
5535 UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
5536 UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
5537 // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
5538 UCHAR ucReserved[3];
5540 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
5541 USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
5542 USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
5543 UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
5544 UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
5545 UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
5546 UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
5547 ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
5548 }ATOM_VRAM_MODULE_V5;
5550 typedef struct _ATOM_VRAM_MODULE_V6
5552 ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
5553 USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
5554 USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
5555 // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
5557 UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
5558 UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
5559 UCHAR ucChannelNum; // Number of channels present in this module config
5560 UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
5561 UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
5562 UCHAR ucFlag; // To enable/disable functionalities based on memory type
5563 UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
5564 UCHAR ucVREFI; // board dependent parameter
5565 UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
5566 UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
5567 UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
5568 // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
5569 UCHAR ucReserved[3];
5571 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
5572 USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
5573 USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
5574 UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
5575 UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
5576 UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
5577 UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
5578 ATOM_MEMORY_TIMING_FORMAT_V2 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
5579 }ATOM_VRAM_MODULE_V6;
5581 typedef struct _ATOM_VRAM_MODULE_V7
5583 // Design Specific Values
5584 ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP
5585 USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7
5586 USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
5588 UCHAR ucExtMemoryID; // Current memory module ID
5589 UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
5590 UCHAR ucChannelNum; // Number of mem. channels supported in this module
5591 UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
5592 UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
5593 UCHAR ucReserve; // Former container for Mx_FLAGS like DBI_AC_MODE_ENABLE_ASIC for GDDR4. Not used now.
5594 UCHAR ucMisc; // RANK_OF_THISMEMORY etc.
5595 UCHAR ucVREFI; // Not used.
5596 UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
5597 UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
5598 UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
5599 UCHAR ucReserved[3];
5600 // Memory Module specific values
5601 USHORT usEMRS2Value; // EMRS2/MR2 Value.
5602 USHORT usEMRS3Value; // EMRS3/MR3 Value.
5603 UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code
5604 UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
5605 UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory
5606 UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
5607 char strMemPNString[20]; // part number end with '0'.
5608 }ATOM_VRAM_MODULE_V7;
5610 typedef struct _ATOM_VRAM_INFO_V2
5612 ATOM_COMMON_TABLE_HEADER sHeader;
5613 UCHAR ucNumOfVRAMModule;
5614 ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
5617 typedef struct _ATOM_VRAM_INFO_V3
5619 ATOM_COMMON_TABLE_HEADER sHeader;
5620 USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
5621 USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
5623 UCHAR aVID_PinsShift[9]; // 8 bit strap maximum+terminator
5624 UCHAR ucNumOfVRAMModule;
5625 ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
5626 ATOM_INIT_REG_BLOCK asMemPatch; // for allocation
5627 // ATOM_INIT_REG_BLOCK aMemAdjust;
5630 #define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3
5632 typedef struct _ATOM_VRAM_INFO_V4
5634 ATOM_COMMON_TABLE_HEADER sHeader;
5635 USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
5636 USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
5638 UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
5639 ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
5640 UCHAR ucReservde[4];
5641 UCHAR ucNumOfVRAMModule;
5642 ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
5643 ATOM_INIT_REG_BLOCK asMemPatch; // for allocation
5644 // ATOM_INIT_REG_BLOCK aMemAdjust;
5647 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
5649 ATOM_COMMON_TABLE_HEADER sHeader;
5650 USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
5651 USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
5652 USHORT usReserved[4];
5653 UCHAR ucNumOfVRAMModule; // indicate number of VRAM module
5654 UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list
5655 UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version
5657 ATOM_VRAM_MODULE_V7 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
5658 }ATOM_VRAM_INFO_HEADER_V2_1;
5661 typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
5663 ATOM_COMMON_TABLE_HEADER sHeader;
5664 UCHAR aVID_PinsShift[9]; //8 bit strap maximum+terminator
5665 }ATOM_VRAM_GPIO_DETECTION_INFO;
5668 typedef struct _ATOM_MEMORY_TRAINING_INFO
5670 ATOM_COMMON_TABLE_HEADER sHeader;
5671 UCHAR ucTrainingLoop;
5672 UCHAR ucReserved[3];
5673 ATOM_INIT_REG_BLOCK asMemTrainingSetting;
5674 }ATOM_MEMORY_TRAINING_INFO;
5677 typedef struct SW_I2C_CNTL_DATA_PARAMETERS
5683 } SW_I2C_CNTL_DATA_PARAMETERS;
5685 #define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS
5687 typedef struct _SW_I2C_IO_DATA_PARAMETERS
5692 } SW_I2C_IO_DATA_PARAMETERS;
5694 #define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS
5696 /****************************SW I2C CNTL DEFINITIONS**********************/
5697 #define SW_I2C_IO_RESET 0
5698 #define SW_I2C_IO_GET 1
5699 #define SW_I2C_IO_DRIVE 2
5700 #define SW_I2C_IO_SET 3
5701 #define SW_I2C_IO_START 4
5703 #define SW_I2C_IO_CLOCK 0
5704 #define SW_I2C_IO_DATA 0x80
5706 #define SW_I2C_IO_ZERO 0
5707 #define SW_I2C_IO_ONE 0x100
5709 #define SW_I2C_CNTL_READ 0
5710 #define SW_I2C_CNTL_WRITE 1
5711 #define SW_I2C_CNTL_START 2
5712 #define SW_I2C_CNTL_STOP 3
5713 #define SW_I2C_CNTL_OPEN 4
5714 #define SW_I2C_CNTL_CLOSE 5
5715 #define SW_I2C_CNTL_WRITE1BIT 6
5717 //==============================VESA definition Portion===============================
5718 #define VESA_OEM_PRODUCT_REV "01.00"
5719 #define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support
5720 #define VESA_MODE_WIN_ATTRIBUTE 7
5721 #define VESA_WIN_SIZE 64
5723 typedef struct _PTR_32_BIT_STRUCTURE
5727 } PTR_32_BIT_STRUCTURE;
5729 typedef union _PTR_32_BIT_UNION
5731 PTR_32_BIT_STRUCTURE SegmentOffset;
5735 typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE
5737 UCHAR VbeSignature[4];
5739 PTR_32_BIT_UNION OemStringPtr;
5740 UCHAR Capabilities[4];
5741 PTR_32_BIT_UNION VideoModePtr;
5743 } VBE_1_2_INFO_BLOCK_UPDATABLE;
5746 typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE
5748 VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock;
5750 PTR_32_BIT_UNION OemVendorNamePtr;
5751 PTR_32_BIT_UNION OemProductNamePtr;
5752 PTR_32_BIT_UNION OemProductRevPtr;
5753 } VBE_2_0_INFO_BLOCK_UPDATABLE;
5755 typedef union _VBE_VERSION_UNION
5757 VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock;
5758 VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock;
5759 } VBE_VERSION_UNION;
5761 typedef struct _VBE_INFO_BLOCK
5763 VBE_VERSION_UNION UpdatableVBE_Info;
5764 UCHAR Reserved[222];
5768 typedef struct _VBE_FP_INFO
5777 ULONG RsvdOffScrnMemSize;
5778 ULONG RsvdOffScrnMEmPtr;
5782 typedef struct _VESA_MODE_INFO_BLOCK
5784 // Mandatory information for all VBE revisions
5785 USHORT ModeAttributes; // dw ? ; mode attributes
5786 UCHAR WinAAttributes; // db ? ; window A attributes
5787 UCHAR WinBAttributes; // db ? ; window B attributes
5788 USHORT WinGranularity; // dw ? ; window granularity
5789 USHORT WinSize; // dw ? ; window size
5790 USHORT WinASegment; // dw ? ; window A start segment
5791 USHORT WinBSegment; // dw ? ; window B start segment
5792 ULONG WinFuncPtr; // dd ? ; real mode pointer to window function
5793 USHORT BytesPerScanLine;// dw ? ; bytes per scan line
5795 //; Mandatory information for VBE 1.2 and above
5796 USHORT XResolution; // dw ? ; horizontal resolution in pixels or characters
5797 USHORT YResolution; // dw ? ; vertical resolution in pixels or characters
5798 UCHAR XCharSize; // db ? ; character cell width in pixels
5799 UCHAR YCharSize; // db ? ; character cell height in pixels
5800 UCHAR NumberOfPlanes; // db ? ; number of memory planes
5801 UCHAR BitsPerPixel; // db ? ; bits per pixel
5802 UCHAR NumberOfBanks; // db ? ; number of banks
5803 UCHAR MemoryModel; // db ? ; memory model type
5804 UCHAR BankSize; // db ? ; bank size in KB
5805 UCHAR NumberOfImagePages;// db ? ; number of images
5806 UCHAR ReservedForPageFunction;//db 1 ; reserved for page function
5808 //; Direct Color fields(required for direct/6 and YUV/7 memory models)
5809 UCHAR RedMaskSize; // db ? ; size of direct color red mask in bits
5810 UCHAR RedFieldPosition; // db ? ; bit position of lsb of red mask
5811 UCHAR GreenMaskSize; // db ? ; size of direct color green mask in bits
5812 UCHAR GreenFieldPosition; // db ? ; bit position of lsb of green mask
5813 UCHAR BlueMaskSize; // db ? ; size of direct color blue mask in bits
5814 UCHAR BlueFieldPosition; // db ? ; bit position of lsb of blue mask
5815 UCHAR RsvdMaskSize; // db ? ; size of direct color reserved mask in bits
5816 UCHAR RsvdFieldPosition; // db ? ; bit position of lsb of reserved mask
5817 UCHAR DirectColorModeInfo;// db ? ; direct color mode attributes
5819 //; Mandatory information for VBE 2.0 and above
5820 ULONG PhysBasePtr; // dd ? ; physical address for flat memory frame buffer
5821 ULONG Reserved_1; // dd 0 ; reserved - always set to 0
5822 USHORT Reserved_2; // dw 0 ; reserved - always set to 0
5824 //; Mandatory information for VBE 3.0 and above
5825 USHORT LinBytesPerScanLine; // dw ? ; bytes per scan line for linear modes
5826 UCHAR BnkNumberOfImagePages;// db ? ; number of images for banked modes
5827 UCHAR LinNumberOfImagPages; // db ? ; number of images for linear modes
5828 UCHAR LinRedMaskSize; // db ? ; size of direct color red mask(linear modes)
5829 UCHAR LinRedFieldPosition; // db ? ; bit position of lsb of red mask(linear modes)
5830 UCHAR LinGreenMaskSize; // db ? ; size of direct color green mask(linear modes)
5831 UCHAR LinGreenFieldPosition;// db ? ; bit position of lsb of green mask(linear modes)
5832 UCHAR LinBlueMaskSize; // db ? ; size of direct color blue mask(linear modes)
5833 UCHAR LinBlueFieldPosition; // db ? ; bit position of lsb of blue mask(linear modes)
5834 UCHAR LinRsvdMaskSize; // db ? ; size of direct color reserved mask(linear modes)
5835 UCHAR LinRsvdFieldPosition; // db ? ; bit position of lsb of reserved mask(linear modes)
5836 ULONG MaxPixelClock; // dd ? ; maximum pixel clock(in Hz) for graphics mode
5837 UCHAR Reserved; // db 190 dup (0)
5838 } VESA_MODE_INFO_BLOCK;
5840 // BIOS function CALLS
5841 #define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 // ATI Extended Function code
5842 #define ATOM_BIOS_FUNCTION_COP_MODE 0x00
5843 #define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04
5844 #define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05
5845 #define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06
5846 #define ATOM_BIOS_FUNCTION_GET_DDC 0x0B
5847 #define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E
5848 #define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F
5849 #define ATOM_BIOS_FUNCTION_STV_STD 0x16
5850 #define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17
5851 #define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18
5853 #define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82
5854 #define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83
5855 #define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84
5856 #define ATOM_BIOS_FUNCTION_HW_ICON 0x8A
5857 #define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B
5858 #define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 // Sub function 80
5859 #define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 // Sub function 80
5861 #define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D
5862 #define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E
5863 #define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F
5864 #define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 // Sub function 03
5865 #define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 // Sub function 7
5866 #define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 // Notify caller the current thermal state
5867 #define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 // Notify caller the current critical state
5868 #define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 // Sub function 85
5869 #define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89
5870 #define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 // Notify caller that ADC is supported
5873 #define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 // Set DPMS
5874 #define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 // BL: Sub function 01
5875 #define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 // BL: Sub function 02
5876 #define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 // BH Parameter for DPMS ON.
5877 #define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 // BH Parameter for DPMS STANDBY
5878 #define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 // BH Parameter for DPMS SUSPEND
5879 #define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 // BH Parameter for DPMS OFF
5880 #define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED)
5882 #define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L
5883 #define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L
5884 #define ATOM_BIOS_REG_LOW_MASK 0x000000FFL
5886 // structure used for VBIOS only
5889 typedef struct _ASIC_TRANSMITTER_INFO
5891 USHORT usTransmitterObjId;
5892 USHORT usSupportDevice;
5893 UCHAR ucTransmitterCmdTblId;
5895 UCHAR ucEncoderID; //available 1st encoder ( default )
5896 UCHAR ucOptionEncoderID; //available 2nd encoder ( optional )
5897 UCHAR uc2ndEncoderID;
5899 }ASIC_TRANSMITTER_INFO;
5901 #define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE 0x01
5902 #define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE 0x02
5903 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK 0xc4
5904 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A 0x00
5905 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B 0x04
5906 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C 0x40
5907 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D 0x44
5908 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E 0x80
5909 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F 0x84
5911 typedef struct _ASIC_ENCODER_INFO
5914 UCHAR ucEncoderConfig;
5915 USHORT usEncoderCmdTblId;
5918 typedef struct _ATOM_DISP_OUT_INFO
5920 ATOM_COMMON_TABLE_HEADER sHeader;
5921 USHORT ptrTransmitterInfo;
5922 USHORT ptrEncoderInfo;
5923 ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
5924 ASIC_ENCODER_INFO asEncoderInfo[1];
5925 }ATOM_DISP_OUT_INFO;
5927 typedef struct _ATOM_DISP_OUT_INFO_V2
5929 ATOM_COMMON_TABLE_HEADER sHeader;
5930 USHORT ptrTransmitterInfo;
5931 USHORT ptrEncoderInfo;
5932 USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary.
5933 ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
5934 ASIC_ENCODER_INFO asEncoderInfo[1];
5935 }ATOM_DISP_OUT_INFO_V2;
5937 // DispDevicePriorityInfo
5938 typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
5940 ATOM_COMMON_TABLE_HEADER sHeader;
5941 USHORT asDevicePriority[16];
5942 }ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
5944 //ProcessAuxChannelTransactionTable
5945 typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
5947 USHORT lpAuxRequest;
5952 UCHAR ucReplyStatus;
5957 }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
5959 //ProcessAuxChannelTransactionTable
5960 typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2
5962 USHORT lpAuxRequest;
5967 UCHAR ucReplyStatus;
5971 UCHAR ucHPD_ID; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6
5972 }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2;
5974 #define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
5978 typedef struct _DP_ENCODER_SERVICE_PARAMETERS
5983 UCHAR ucConfig; // for DP training command
5984 UCHAR ucI2cId; // use for GET_SINK_TYPE command
5989 UCHAR ucReserved[2];
5990 }DP_ENCODER_SERVICE_PARAMETERS;
5993 #define ATOM_DP_ACTION_GET_SINK_TYPE 0x01
5995 #define ATOM_DP_ACTION_TRAINING_START 0x02
5996 #define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03
5997 #define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04
5998 #define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05
5999 #define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06
6000 #define ATOM_DP_ACTION_BLANKING 0x07
6003 #define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03
6004 #define ATOM_DP_CONFIG_DIG1_ENCODER 0x00
6005 #define ATOM_DP_CONFIG_DIG2_ENCODER 0x01
6006 #define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02
6007 #define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04
6008 #define ATOM_DP_CONFIG_LINK_A 0x00
6009 #define ATOM_DP_CONFIG_LINK_B 0x04
6011 #define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
6014 typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2
6016 USHORT usExtEncoderObjId; // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
6019 UCHAR ucSinkType; // Iput and Output parameters.
6020 UCHAR ucHPDId; // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
6021 UCHAR ucReserved[2];
6022 }DP_ENCODER_SERVICE_PARAMETERS_V2;
6024 typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2
6026 DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam;
6027 PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam;
6028 }DP_ENCODER_SERVICE_PS_ALLOCATION_V2;
6031 #define DP_SERVICE_V2_ACTION_GET_SINK_TYPE 0x01
6032 #define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION 0x02
6035 // DP_TRAINING_TABLE
6036 #define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
6037 #define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
6038 #define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16 )
6039 #define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24 )
6040 #define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32)
6041 #define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40)
6042 #define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48)
6043 #define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60)
6044 #define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64)
6045 #define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72)
6046 #define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76)
6047 #define DP_I2C_AUX_DDC_WRITE_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80)
6048 #define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 84)
6050 typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
6058 USHORT lpI2CDataOut;
6063 }PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
6065 #define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
6068 #define HW_I2C_WRITE 1
6069 #define HW_I2C_READ 0
6070 #define I2C_2BYTE_ADDR 0x02
6072 typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
6074 UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ...
6075 UCHAR ucReserved[3];
6076 }SET_HWBLOCK_INSTANCE_PARAMETER_V2;
6078 #define HWBLKINST_INSTANCE_MASK 0x07
6079 #define HWBLKINST_HWBLK_MASK 0xF0
6080 #define HWBLKINST_HWBLK_SHIFT 0x04
6083 #define SELECT_DISP_ENGINE 0
6084 #define SELECT_DISP_PLL 1
6085 #define SELECT_DCIO_UNIPHY_LINK0 2
6086 #define SELECT_DCIO_UNIPHY_LINK1 3
6087 #define SELECT_DCIO_IMPCAL 4
6088 #define SELECT_DCIO_DIG 6
6089 #define SELECT_CRTC_PIXEL_RATE 7
6090 #define SELECT_VGA_BLK 8
6092 /****************************************************************************/
6093 //Portion VI: Definitinos for vbios MC scratch registers that driver used
6094 /****************************************************************************/
6096 #define MC_MISC0__MEMORY_TYPE_MASK 0xF0000000
6097 #define MC_MISC0__MEMORY_TYPE__GDDR1 0x10000000
6098 #define MC_MISC0__MEMORY_TYPE__DDR2 0x20000000
6099 #define MC_MISC0__MEMORY_TYPE__GDDR3 0x30000000
6100 #define MC_MISC0__MEMORY_TYPE__GDDR4 0x40000000
6101 #define MC_MISC0__MEMORY_TYPE__GDDR5 0x50000000
6102 #define MC_MISC0__MEMORY_TYPE__DDR3 0xB0000000
6104 /****************************************************************************/
6105 //Portion VI: Definitinos being oboselete
6106 /****************************************************************************/
6108 //==========================================================================================
6109 //Remove the definitions below when driver is ready!
6110 typedef struct _ATOM_DAC_INFO
6112 ATOM_COMMON_TABLE_HEADER sHeader;
6113 USHORT usMaxFrequency; // in 10kHz unit
6118 typedef struct _COMPASSIONATE_DATA
6120 ATOM_COMMON_TABLE_HEADER sHeader;
6122 //============================== DAC1 portion
6123 UCHAR ucDAC1_BG_Adjustment;
6124 UCHAR ucDAC1_DAC_Adjustment;
6125 USHORT usDAC1_FORCE_Data;
6126 //============================== DAC2 portion
6127 UCHAR ucDAC2_CRT2_BG_Adjustment;
6128 UCHAR ucDAC2_CRT2_DAC_Adjustment;
6129 USHORT usDAC2_CRT2_FORCE_Data;
6130 USHORT usDAC2_CRT2_MUX_RegisterIndex;
6131 UCHAR ucDAC2_CRT2_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
6132 UCHAR ucDAC2_NTSC_BG_Adjustment;
6133 UCHAR ucDAC2_NTSC_DAC_Adjustment;
6134 USHORT usDAC2_TV1_FORCE_Data;
6135 USHORT usDAC2_TV1_MUX_RegisterIndex;
6136 UCHAR ucDAC2_TV1_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
6137 UCHAR ucDAC2_CV_BG_Adjustment;
6138 UCHAR ucDAC2_CV_DAC_Adjustment;
6139 USHORT usDAC2_CV_FORCE_Data;
6140 USHORT usDAC2_CV_MUX_RegisterIndex;
6141 UCHAR ucDAC2_CV_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
6142 UCHAR ucDAC2_PAL_BG_Adjustment;
6143 UCHAR ucDAC2_PAL_DAC_Adjustment;
6144 USHORT usDAC2_TV2_FORCE_Data;
6145 }COMPASSIONATE_DATA;
6147 /****************************Supported Device Info Table Definitions**********************/
6149 // [7:4] - connector type
6150 // = 1 - VGA connector
6157 // = 8 - DIGITAL LINK
6159 // = 0xA - HDMI_type A
6160 // = 0xB - HDMI_type B
6161 // = 0xE - Special case1 (DVI+DIN)
6163 // [3:0] - DAC Associated
6167 // = 3 - External DAC
6171 typedef struct _ATOM_CONNECTOR_INFO
6174 UCHAR bfConnectorType:4;
6175 UCHAR bfAssociatedDAC:4;
6177 UCHAR bfAssociatedDAC:4;
6178 UCHAR bfConnectorType:4;
6180 }ATOM_CONNECTOR_INFO;
6182 typedef union _ATOM_CONNECTOR_INFO_ACCESS
6184 ATOM_CONNECTOR_INFO sbfAccess;
6186 }ATOM_CONNECTOR_INFO_ACCESS;
6188 typedef struct _ATOM_CONNECTOR_INFO_I2C
6190 ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
6191 ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
6192 }ATOM_CONNECTOR_INFO_I2C;
6195 typedef struct _ATOM_SUPPORTED_DEVICES_INFO
6197 ATOM_COMMON_TABLE_HEADER sHeader;
6198 USHORT usDeviceSupport;
6199 ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
6200 }ATOM_SUPPORTED_DEVICES_INFO;
6202 #define NO_INT_SRC_MAPPED 0xFF
6204 typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP
6206 UCHAR ucIntSrcBitmap;
6207 }ATOM_CONNECTOR_INC_SRC_BITMAP;
6209 typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2
6211 ATOM_COMMON_TABLE_HEADER sHeader;
6212 USHORT usDeviceSupport;
6213 ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
6214 ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
6215 }ATOM_SUPPORTED_DEVICES_INFO_2;
6217 typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1
6219 ATOM_COMMON_TABLE_HEADER sHeader;
6220 USHORT usDeviceSupport;
6221 ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
6222 ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
6223 }ATOM_SUPPORTED_DEVICES_INFO_2d1;
6225 #define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
6229 typedef struct _ATOM_MISC_CONTROL_INFO
6232 UCHAR ucPLL_ChargePump; // PLL charge-pump gain control
6233 UCHAR ucPLL_DutyCycle; // PLL duty cycle control
6234 UCHAR ucPLL_VCO_Gain; // PLL VCO gain control
6235 UCHAR ucPLL_VoltageSwing; // PLL driver voltage swing control
6236 }ATOM_MISC_CONTROL_INFO;
6239 #define ATOM_MAX_MISC_INFO 4
6241 typedef struct _ATOM_TMDS_INFO
6243 ATOM_COMMON_TABLE_HEADER sHeader;
6244 USHORT usMaxFrequency; // in 10Khz
6245 ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO];
6249 typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE
6251 UCHAR ucTVStandard; //Same as TV standards defined above,
6253 }ATOM_ENCODER_ANALOG_ATTRIBUTE;
6255 typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE
6257 UCHAR ucAttribute; //Same as other digital encoder attributes defined above
6259 }ATOM_ENCODER_DIGITAL_ATTRIBUTE;
6261 typedef union _ATOM_ENCODER_ATTRIBUTE
6263 ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
6264 ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
6265 }ATOM_ENCODER_ATTRIBUTE;
6268 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS
6270 USHORT usPixelClock;
6272 UCHAR ucDeviceType; //Use ATOM_DEVICE_xxx1_Index to indicate device type only.
6273 UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
6274 ATOM_ENCODER_ATTRIBUTE usDevAttr;
6275 }DVO_ENCODER_CONTROL_PARAMETERS;
6277 typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION
6279 DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder;
6280 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
6281 }DVO_ENCODER_CONTROL_PS_ALLOCATION;
6284 #define ATOM_XTMDS_ASIC_SI164_ID 1
6285 #define ATOM_XTMDS_ASIC_SI178_ID 2
6286 #define ATOM_XTMDS_ASIC_TFP513_ID 3
6287 #define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
6288 #define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002
6289 #define ATOM_XTMDS_MVPU_FPGA 0x00000004
6292 typedef struct _ATOM_XTMDS_INFO
6294 ATOM_COMMON_TABLE_HEADER sHeader;
6295 USHORT usSingleLinkMaxFrequency;
6296 ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip
6297 UCHAR ucXtransimitterID;
6298 UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
6299 UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
6300 // due to design. This ID is used to alert driver that the sequence is not "standard"!
6301 UCHAR ucMasterAddress; // Address to control Master xTMDS Chip
6302 UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip
6305 typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS
6307 UCHAR ucEnable; // ATOM_ENABLE=On or ATOM_DISABLE=Off
6308 UCHAR ucDevice; // ATOM_DEVICE_DFP1_INDEX....
6310 }DFP_DPMS_STATUS_CHANGE_PARAMETERS;
6312 /****************************Legacy Power Play Table Definitions **********************/
6314 //Definitions for ulPowerPlayMiscInfo
6315 #define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L
6316 #define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L
6317 #define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L
6319 #define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L
6320 #define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L
6322 #define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L
6324 #define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L
6325 #define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L
6326 #define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program
6328 #define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L
6329 #define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L
6330 #define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L
6331 #define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L
6332 #define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L
6333 #define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
6334 #define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L
6336 #define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L
6337 #define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L
6338 #define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L
6339 #define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L
6340 #define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L
6342 #define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved
6343 #define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20
6345 #define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L
6346 #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L
6347 #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L
6348 #define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L //When set, Dynamic
6349 #define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L //When set, Dynamic
6350 #define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L //When set, This mode is for acceleated 3D mode
6352 #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks)
6353 #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28
6354 #define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L
6356 #define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L
6357 #define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L
6358 #define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L
6359 #define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L
6360 #define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L
6361 #define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L
6362 #define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption.
6363 //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback
6364 #define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L
6365 #define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L
6366 #define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L
6368 //ucTableFormatRevision=1
6369 //ucTableContentRevision=1
6370 typedef struct _ATOM_POWERMODE_INFO
6372 ULONG ulMiscInfo; //The power level should be arranged in ascending order
6373 ULONG ulReserved1; // must set to 0
6374 ULONG ulReserved2; // must set to 0
6375 USHORT usEngineClock;
6376 USHORT usMemoryClock;
6377 UCHAR ucVoltageDropIndex; // index to GPIO table
6378 UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
6379 UCHAR ucMinTemperature;
6380 UCHAR ucMaxTemperature;
6381 UCHAR ucNumPciELanes; // number of PCIE lanes
6382 }ATOM_POWERMODE_INFO;
6384 //ucTableFormatRevision=2
6385 //ucTableContentRevision=1
6386 typedef struct _ATOM_POWERMODE_INFO_V2
6388 ULONG ulMiscInfo; //The power level should be arranged in ascending order
6390 ULONG ulEngineClock;
6391 ULONG ulMemoryClock;
6392 UCHAR ucVoltageDropIndex; // index to GPIO table
6393 UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
6394 UCHAR ucMinTemperature;
6395 UCHAR ucMaxTemperature;
6396 UCHAR ucNumPciELanes; // number of PCIE lanes
6397 }ATOM_POWERMODE_INFO_V2;
6399 //ucTableFormatRevision=2
6400 //ucTableContentRevision=2
6401 typedef struct _ATOM_POWERMODE_INFO_V3
6403 ULONG ulMiscInfo; //The power level should be arranged in ascending order
6405 ULONG ulEngineClock;
6406 ULONG ulMemoryClock;
6407 UCHAR ucVoltageDropIndex; // index to Core (VDDC) votage table
6408 UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
6409 UCHAR ucMinTemperature;
6410 UCHAR ucMaxTemperature;
6411 UCHAR ucNumPciELanes; // number of PCIE lanes
6412 UCHAR ucVDDCI_VoltageDropIndex; // index to VDDCI votage table
6413 }ATOM_POWERMODE_INFO_V3;
6416 #define ATOM_MAX_NUMBEROF_POWER_BLOCK 8
6418 #define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01
6419 #define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02
6421 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01
6422 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02
6423 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03
6424 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04
6425 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05
6426 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06
6427 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 // Andigilog
6430 typedef struct _ATOM_POWERPLAY_INFO
6432 ATOM_COMMON_TABLE_HEADER sHeader;
6433 UCHAR ucOverdriveThermalController;
6434 UCHAR ucOverdriveI2cLine;
6435 UCHAR ucOverdriveIntBitmap;
6436 UCHAR ucOverdriveControllerAddress;
6437 UCHAR ucSizeOfPowerModeEntry;
6438 UCHAR ucNumOfPowerModeEntries;
6439 ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
6440 }ATOM_POWERPLAY_INFO;
6442 typedef struct _ATOM_POWERPLAY_INFO_V2
6444 ATOM_COMMON_TABLE_HEADER sHeader;
6445 UCHAR ucOverdriveThermalController;
6446 UCHAR ucOverdriveI2cLine;
6447 UCHAR ucOverdriveIntBitmap;
6448 UCHAR ucOverdriveControllerAddress;
6449 UCHAR ucSizeOfPowerModeEntry;
6450 UCHAR ucNumOfPowerModeEntries;
6451 ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
6452 }ATOM_POWERPLAY_INFO_V2;
6454 typedef struct _ATOM_POWERPLAY_INFO_V3
6456 ATOM_COMMON_TABLE_HEADER sHeader;
6457 UCHAR ucOverdriveThermalController;
6458 UCHAR ucOverdriveI2cLine;
6459 UCHAR ucOverdriveIntBitmap;
6460 UCHAR ucOverdriveControllerAddress;
6461 UCHAR ucSizeOfPowerModeEntry;
6462 UCHAR ucNumOfPowerModeEntries;
6463 ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
6464 }ATOM_POWERPLAY_INFO_V3;
6467 /**************************************************************************/
6468 typedef struct _ATOM_PPLIB_THERMALCONTROLLER
6471 UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_*
6472 UCHAR ucI2cLine; // as interpreted by DAL I2C
6474 UCHAR ucFanParameters; // Fan Control Parameters.
6475 UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only.
6476 UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only.
6477 UCHAR ucReserved; // ----
6478 UCHAR ucFlags; // to be defined
6479 } ATOM_PPLIB_THERMALCONTROLLER;
6481 #define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f
6482 #define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller.
6484 #define ATOM_PP_THERMALCONTROLLER_NONE 0
6485 #define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib
6486 #define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib
6487 #define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib
6488 #define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib
6489 #define ATOM_PP_THERMALCONTROLLER_LM64 5
6490 #define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib
6491 #define ATOM_PP_THERMALCONTROLLER_RV6xx 7
6492 #define ATOM_PP_THERMALCONTROLLER_RV770 8
6493 #define ATOM_PP_THERMALCONTROLLER_ADT7473 9
6494 #define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11
6495 #define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12
6496 #define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen.
6497 #define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally
6498 #define ATOM_PP_THERMALCONTROLLER_NISLANDS 15
6500 // Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal.
6501 // We probably should reserve the bit 0x80 for this use.
6502 // To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here).
6503 // The driver can pick the correct internal controller based on the ASIC.
6505 #define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller
6506 #define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller
6508 typedef struct _ATOM_PPLIB_STATE
6510 UCHAR ucNonClockStateIndex;
6511 UCHAR ucClockStateIndices[1]; // variable-sized
6514 typedef struct _ATOM_PPLIB_FANTABLE
6516 UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same.
6517 UCHAR ucTHyst; // Temperature hysteresis. Integer.
6518 USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM.
6519 USHORT usTMed; // The middle temperature where we change slopes.
6520 USHORT usTHigh; // The high point above TMed for adjusting the second slope.
6521 USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments).
6522 USHORT usPWMMed; // The PWM value (in percent) at TMed.
6523 USHORT usPWMHigh; // The PWM value at THigh.
6524 } ATOM_PPLIB_FANTABLE;
6526 typedef struct _ATOM_PPLIB_EXTENDEDHEADER
6529 ULONG ulMaxEngineClock; // For Overdrive.
6530 ULONG ulMaxMemoryClock; // For Overdrive.
6531 // Add extra system parameters here, always adjust size to include all fields.
6532 } ATOM_PPLIB_EXTENDEDHEADER;
6534 //// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps
6535 #define ATOM_PP_PLATFORM_CAP_BACKBIAS 1
6536 #define ATOM_PP_PLATFORM_CAP_POWERPLAY 2
6537 #define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4
6538 #define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8
6539 #define ATOM_PP_PLATFORM_CAP_ASPM_L1 16
6540 #define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32
6541 #define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64
6542 #define ATOM_PP_PLATFORM_CAP_STEPVDDC 128
6543 #define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256
6544 #define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512
6545 #define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024
6546 #define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048
6547 #define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096
6548 #define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition.
6549 #define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition).
6550 #define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC.
6551 #define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature.
6552 #define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state.
6554 typedef struct _ATOM_PPLIB_POWERPLAYTABLE
6556 ATOM_COMMON_TABLE_HEADER sHeader;
6558 UCHAR ucDataRevision;
6561 UCHAR ucStateEntrySize;
6562 UCHAR ucClockInfoSize;
6563 UCHAR ucNonClockSize;
6565 // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures
6566 USHORT usStateArrayOffset;
6568 // offset from start of this table to array of ASIC-specific structures,
6569 // currently ATOM_PPLIB_CLOCK_INFO.
6570 USHORT usClockInfoArrayOffset;
6572 // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO
6573 USHORT usNonClockInfoArrayOffset;
6575 USHORT usBackbiasTime; // in microseconds
6576 USHORT usVoltageTime; // in microseconds
6577 USHORT usTableSize; //the size of this structure, or the extended structure
6579 ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_*
6581 ATOM_PPLIB_THERMALCONTROLLER sThermalController;
6583 USHORT usBootClockInfoOffset;
6584 USHORT usBootNonClockInfoOffset;
6586 } ATOM_PPLIB_POWERPLAYTABLE;
6588 typedef struct _ATOM_PPLIB_POWERPLAYTABLE2
6590 ATOM_PPLIB_POWERPLAYTABLE basicTable;
6591 UCHAR ucNumCustomThermalPolicy;
6592 USHORT usCustomThermalPolicyArrayOffset;
6593 }ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2;
6595 typedef struct _ATOM_PPLIB_POWERPLAYTABLE3
6597 ATOM_PPLIB_POWERPLAYTABLE2 basicTable2;
6598 USHORT usFormatID; // To be used ONLY by PPGen.
6599 USHORT usFanTableOffset;
6600 USHORT usExtendendedHeaderOffset;
6601 } ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3;
6603 typedef struct _ATOM_PPLIB_POWERPLAYTABLE4
6605 ATOM_PPLIB_POWERPLAYTABLE3 basicTable3;
6606 ULONG ulGoldenPPID; // PPGen use only
6607 ULONG ulGoldenRevision; // PPGen use only
6608 USHORT usVddcDependencyOnSCLKOffset;
6609 USHORT usVddciDependencyOnMCLKOffset;
6610 USHORT usVddcDependencyOnMCLKOffset;
6611 USHORT usMaxClockVoltageOnDCOffset;
6612 USHORT usReserved[2];
6613 } ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4;
6615 typedef struct _ATOM_PPLIB_POWERPLAYTABLE5
6617 ATOM_PPLIB_POWERPLAYTABLE4 basicTable4;
6619 ULONG ulNearTDPLimit;
6620 ULONG ulSQRampingThreshold;
6621 USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table
6622 ULONG ulCACLeakage; // TBD, this parameter is still under discussion. Change to ulReserved if not needed.
6624 } ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5;
6626 //// ATOM_PPLIB_NONCLOCK_INFO::usClassification
6627 #define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007
6628 #define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0
6629 #define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0
6630 #define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1
6631 #define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3
6632 #define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5
6633 // 2, 4, 6, 7 are reserved
6635 #define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008
6636 #define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010
6637 #define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020
6638 #define ATOM_PPLIB_CLASSIFICATION_REST 0x0040
6639 #define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080
6640 #define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100
6641 #define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200
6642 #define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400
6643 #define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800
6644 #define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000
6645 #define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000
6646 #define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000
6647 #define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000
6649 //// ATOM_PPLIB_NONCLOCK_INFO::usClassification2
6650 #define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001
6651 #define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002
6653 //// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings
6654 #define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001
6655 #define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002
6657 // 0 is 2.5Gb/s, 1 is 5Gb/s
6658 #define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004
6659 #define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2
6661 // lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec
6662 #define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8
6663 #define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3
6665 // lookup into reduced refresh-rate table
6666 #define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00
6667 #define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8
6669 #define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0
6670 #define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1
6671 // 2-15 TBD as needed.
6673 #define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000
6674 #define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000
6675 #define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000
6676 #define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000
6678 //memory related flags
6679 #define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000
6681 //M3 Arb //2bits, current 3 sets of parameters in total
6682 #define ATOM_PPLIB_M3ARB_MASK 0x00060000
6683 #define ATOM_PPLIB_M3ARB_SHIFT 17
6685 #define ATOM_PPLIB_ENABLE_DRR 0x00080000
6687 // remaining 16 bits are reserved
6688 typedef struct _ATOM_PPLIB_THERMAL_STATE
6690 UCHAR ucMinTemperature;
6691 UCHAR ucMaxTemperature;
6692 UCHAR ucThermalAction;
6693 }ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE;
6695 // Contained in an array starting at the offset
6696 // in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset.
6697 // referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex
6698 #define ATOM_PPLIB_NONCLOCKINFO_VER1 12
6699 #define ATOM_PPLIB_NONCLOCKINFO_VER2 24
6700 typedef struct _ATOM_PPLIB_NONCLOCK_INFO
6702 USHORT usClassification;
6703 UCHAR ucMinTemperature;
6704 UCHAR ucMaxTemperature;
6705 ULONG ulCapsAndSettings;
6706 UCHAR ucRequiredPower;
6707 USHORT usClassification2;
6711 } ATOM_PPLIB_NONCLOCK_INFO;
6713 // Contained in an array starting at the offset
6714 // in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset.
6715 // referenced from ATOM_PPLIB_STATE::ucClockStateIndices
6716 typedef struct _ATOM_PPLIB_R600_CLOCK_INFO
6718 USHORT usEngineClockLow;
6719 UCHAR ucEngineClockHigh;
6721 USHORT usMemoryClockLow;
6722 UCHAR ucMemoryClockHigh;
6728 ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
6730 } ATOM_PPLIB_R600_CLOCK_INFO;
6732 // ulFlags in ATOM_PPLIB_R600_CLOCK_INFO
6733 #define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1
6734 #define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2
6735 #define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4
6736 #define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8
6737 #define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16
6738 #define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0).
6740 typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO
6742 USHORT usEngineClockLow;
6743 UCHAR ucEngineClockHigh;
6745 USHORT usMemoryClockLow;
6746 UCHAR ucMemoryClockHigh;
6752 ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
6754 } ATOM_PPLIB_EVERGREEN_CLOCK_INFO;
6756 typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
6759 USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600).
6760 UCHAR ucLowEngineClockHigh;
6761 USHORT usHighEngineClockLow; // High Engine clock in MHz.
6762 UCHAR ucHighEngineClockHigh;
6763 USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants.
6764 UCHAR ucMemoryClockHigh; // Currentyl unused.
6765 UCHAR ucPadding; // For proper alignment and size.
6766 USHORT usVDDC; // For the 780, use: None, Low, High, Variable
6767 UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16}
6768 UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement.
6769 USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
6771 } ATOM_PPLIB_RS780_CLOCK_INFO;
6773 #define ATOM_PPLIB_RS780_VOLTAGE_NONE 0
6774 #define ATOM_PPLIB_RS780_VOLTAGE_LOW 1
6775 #define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2
6776 #define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3
6778 #define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is.
6779 #define ATOM_PPLIB_RS780_SPMCLK_LOW 1
6780 #define ATOM_PPLIB_RS780_SPMCLK_HIGH 2
6782 #define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0
6783 #define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1
6784 #define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2
6786 typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{
6787 USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz
6788 UCHAR ucEngineClockHigh; //clockfrequency >> 16.
6789 UCHAR vddcIndex; //2-bit vddc index;
6790 UCHAR leakage; //please use 8-bit absolute value, not the 6-bit % value
6791 //please initalize to 0
6793 //please initalize to 0
6795 //please initialize to 0s
6797 }ATOM_PPLIB_SUMO_CLOCK_INFO;
6801 typedef struct _ATOM_PPLIB_STATE_V2
6803 //number of valid dpm levels in this state; Driver uses it to calculate the whole
6804 //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR)
6805 UCHAR ucNumDPMLevels;
6807 //a index to the array of nonClockInfos
6808 UCHAR nonClockInfoIndex;
6810 * Driver will read the first ucNumDPMLevels in this array
6812 UCHAR clockInfoIndex[1];
6813 } ATOM_PPLIB_STATE_V2;
6815 typedef struct StateArray{
6816 //how many states we have
6819 ATOM_PPLIB_STATE_V2 states[1];
6823 typedef struct ClockInfoArray{
6824 //how many clock levels we have
6827 //sizeof(ATOM_PPLIB_SUMO_CLOCK_INFO)
6831 ATOM_PPLIB_SUMO_CLOCK_INFO clockInfo[1];
6834 typedef struct NonClockInfoArray{
6836 //how many non-clock levels we have. normally should be same as number of states
6838 //sizeof(ATOM_PPLIB_NONCLOCK_INFO)
6841 ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1];
6844 typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record
6849 }ATOM_PPLIB_Clock_Voltage_Dependency_Record;
6851 typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table
6853 UCHAR ucNumEntries; // Number of entries.
6854 ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries.
6855 }ATOM_PPLIB_Clock_Voltage_Dependency_Table;
6857 typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record
6865 }ATOM_PPLIB_Clock_Voltage_Limit_Record;
6867 typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
6869 UCHAR ucNumEntries; // Number of entries.
6870 ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries.
6871 }ATOM_PPLIB_Clock_Voltage_Limit_Table;
6873 /**************************************************************************/
6876 // Following definitions are for compatibility issue in different SW components.
6877 #define ATOM_MASTER_DATA_TABLE_REVISION 0x01
6878 #define Object_Info Object_Header
6879 #define AdjustARB_SEQ MC_InitParameter
6880 #define VRAM_GPIO_DetectionInfo VoltageObjectInfo
6881 #define ASIC_VDDCI_Info ASIC_ProfilingInfo
6882 #define ASIC_MVDDQ_Info MemoryTrainingInfo
6883 #define SS_Info PPLL_SS_Info
6884 #define ASIC_MVDDC_Info ASIC_InternalSS_Info
6885 #define DispDevicePriorityInfo SaveRestoreInfo
6886 #define DispOutInfo TV_VideoMode
6889 #define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE
6890 #define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE
6892 //New device naming, remove them when both DAL/VBIOS is ready
6893 #define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
6894 #define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
6896 #define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
6897 #define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
6899 #define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS
6900 #define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
6902 #define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT
6903 #define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT
6905 #define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX
6906 #define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX
6908 #define ATOM_DEVICE_DFP2I_INDEX 0x00000009
6909 #define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX)
6911 #define ATOM_S0_DFP1I ATOM_S0_DFP1
6912 #define ATOM_S0_DFP1X ATOM_S0_DFP2
6914 #define ATOM_S0_DFP2I 0x00200000L
6915 #define ATOM_S0_DFP2Ib2 0x20
6917 #define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE
6918 #define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE
6920 #define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L
6921 #define ATOM_S2_DFP2I_DPMS_STATEb3 0x02
6923 #define ATOM_S3_DFP2I_ACTIVEb1 0x02
6925 #define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE
6926 #define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE
6928 #define ATOM_S3_DFP2I_ACTIVE 0x00000200L
6930 #define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE
6931 #define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE
6932 #define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L
6934 #define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02
6935 #define ATOM_S5_DOS_REQ_DFP2Ib1 0x02
6937 #define ATOM_S5_DOS_REQ_DFP2I 0x0200
6938 #define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1
6939 #define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2
6941 #define ATOM_S6_ACC_REQ_DFP2Ib3 0x02
6942 #define ATOM_S6_ACC_REQ_DFP2I 0x02000000L
6944 #define TMDS1XEncoderControl DVOEncoderControl
6945 #define DFP1XOutputControl DVOOutputControl
6947 #define ExternalDFPOutputControl DFP1XOutputControl
6948 #define EnableExternalTMDS_Encoder TMDS1XEncoderControl
6950 #define DFP1IOutputControl TMDSAOutputControl
6951 #define DFP2IOutputControl LVTMAOutputControl
6953 #define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
6954 #define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
6956 #define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
6957 #define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
6959 #define ucDac1Standard ucDacStandard
6960 #define ucDac2Standard ucDacStandard
6962 #define TMDS1EncoderControl TMDSAEncoderControl
6963 #define TMDS2EncoderControl LVTMAEncoderControl
6965 #define DFP1OutputControl TMDSAOutputControl
6966 #define DFP2OutputControl LVTMAOutputControl
6967 #define CRT1OutputControl DAC1OutputControl
6968 #define CRT2OutputControl DAC2OutputControl
6970 //These two lines will be removed for sure in a few days, will follow up with Michael V.
6971 #define EnableLVDS_SS EnableSpreadSpectrumOnPPLL
6972 #define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL
6974 //#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
6975 //#define ATOM_S2_LCD1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
6976 //#define ATOM_S2_TV1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
6977 //#define ATOM_S2_DFP1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
6978 //#define ATOM_S2_CRT2_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE
6980 #define ATOM_S6_ACC_REQ_TV2 0x00400000L
6981 #define ATOM_DEVICE_TV2_INDEX 0x00000006
6982 #define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX)
6983 #define ATOM_S0_TV2 0x00100000L
6984 #define ATOM_S3_TV2_ACTIVE ATOM_S3_DFP6_ACTIVE
6985 #define ATOM_S3_TV2_CRTC_ACTIVE ATOM_S3_DFP6_CRTC_ACTIVE
6988 #define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
6989 #define ATOM_S2_LCD1_DPMS_STATE 0x00020000L
6990 #define ATOM_S2_TV1_DPMS_STATE 0x00040000L
6991 #define ATOM_S2_DFP1_DPMS_STATE 0x00080000L
6992 #define ATOM_S2_CRT2_DPMS_STATE 0x00100000L
6993 #define ATOM_S2_LCD2_DPMS_STATE 0x00200000L
6994 #define ATOM_S2_TV2_DPMS_STATE 0x00400000L
6995 #define ATOM_S2_DFP2_DPMS_STATE 0x00800000L
6996 #define ATOM_S2_CV_DPMS_STATE 0x01000000L
6997 #define ATOM_S2_DFP3_DPMS_STATE 0x02000000L
6998 #define ATOM_S2_DFP4_DPMS_STATE 0x04000000L
6999 #define ATOM_S2_DFP5_DPMS_STATE 0x08000000L
7001 #define ATOM_S2_CRT1_DPMS_STATEb2 0x01
7002 #define ATOM_S2_LCD1_DPMS_STATEb2 0x02
7003 #define ATOM_S2_TV1_DPMS_STATEb2 0x04
7004 #define ATOM_S2_DFP1_DPMS_STATEb2 0x08
7005 #define ATOM_S2_CRT2_DPMS_STATEb2 0x10
7006 #define ATOM_S2_LCD2_DPMS_STATEb2 0x20
7007 #define ATOM_S2_TV2_DPMS_STATEb2 0x40
7008 #define ATOM_S2_DFP2_DPMS_STATEb2 0x80
7009 #define ATOM_S2_CV_DPMS_STATEb3 0x01
7010 #define ATOM_S2_DFP3_DPMS_STATEb3 0x02
7011 #define ATOM_S2_DFP4_DPMS_STATEb3 0x04
7012 #define ATOM_S2_DFP5_DPMS_STATEb3 0x08
7014 #define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20
7015 #define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
7016 #define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80
7018 /*********************************************************************************/
7020 #pragma pack() // BIOS data must use byte aligment
7022 #endif /* _ATOMBIOS_H */
git.samba.org / sfrench / cifs-2.6.git / blob