drivers/edac/i7core_edac.c

   1 /* Intel i7 core/Nehalem Memory Controller kernel module
   2  *
   3  * This driver supports the memory controllers found on the Intel
   4  * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
   5  * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
   6  * and Westmere-EP.
   7  *
   8  * This file may be distributed under the terms of the
   9  * GNU General Public License version 2 only.
  10  *
  11  * Copyright (c) 2009-2010 by:
  12  *       Mauro Carvalho Chehab <mchehab@redhat.com>
  13  *
  14  * Red Hat Inc. http://www.redhat.com
  15  *
  16  * Forked and adapted from the i5400_edac driver
  17  *
  18  * Based on the following public Intel datasheets:
  19  * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
  20  * Datasheet, Volume 2:
  21  *      http://download.intel.com/design/processor/datashts/320835.pdf
  22  * Intel Xeon Processor 5500 Series Datasheet Volume 2
  23  *      http://www.intel.com/Assets/PDF/datasheet/321322.pdf
  24  * also available at:
  25  *      http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
  26  */
  27
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/pci_ids.h>
  32 #include <linux/slab.h>
  33 #include <linux/delay.h>
  34 #include <linux/dmi.h>
  35 #include <linux/edac.h>
  36 #include <linux/mmzone.h>
  37 #include <linux/smp.h>
  38 #include <asm/mce.h>
  39 #include <asm/processor.h>
  40 #include <asm/div64.h>
  41
  42 #include "edac_core.h"
  43
  44 /* Static vars */
  45 static LIST_HEAD(i7core_edac_list);
  46 static DEFINE_MUTEX(i7core_edac_lock);
  47 static int probed;
  48
  49 static int use_pci_fixup;
  50 module_param(use_pci_fixup, int, 0444);
  51 MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
  52 /*
  53  * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
  54  * registers start at bus 255, and are not reported by BIOS.
  55  * We currently find devices with only 2 sockets. In order to support more QPI
  56  * Quick Path Interconnect, just increment this number.
  57  */
  58 #define MAX_SOCKET_BUSES        2
  59
  60
  61 /*
  62  * Alter this version for the module when modifications are made
  63  */
  64 #define I7CORE_REVISION    " Ver: 1.0.0"
  65 #define EDAC_MOD_STR      "i7core_edac"
  66
  67 /*
  68  * Debug macros
  69  */
  70 #define i7core_printk(level, fmt, arg...)                       \
  71         edac_printk(level, "i7core", fmt, ##arg)
  72
  73 #define i7core_mc_printk(mci, level, fmt, arg...)               \
  74         edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
  75
  76 /*
  77  * i7core Memory Controller Registers
  78  */
  79
  80         /* OFFSETS for Device 0 Function 0 */
  81
  82 #define MC_CFG_CONTROL  0x90
  83   #define MC_CFG_UNLOCK         0x02
  84   #define MC_CFG_LOCK           0x00
  85
  86         /* OFFSETS for Device 3 Function 0 */
  87
  88 #define MC_CONTROL      0x48
  89 #define MC_STATUS       0x4c
  90 #define MC_MAX_DOD      0x64
  91
  92 /*
  93  * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet:
  94  * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
  95  */
  96
  97 #define MC_TEST_ERR_RCV1        0x60
  98   #define DIMM2_COR_ERR(r)                      ((r) & 0x7fff)
  99
 100 #define MC_TEST_ERR_RCV0        0x64
 101   #define DIMM1_COR_ERR(r)                      (((r) >> 16) & 0x7fff)
 102   #define DIMM0_COR_ERR(r)                      ((r) & 0x7fff)
 103
 104 /* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */
 105 #define MC_SSRCONTROL           0x48
 106   #define SSR_MODE_DISABLE      0x00
 107   #define SSR_MODE_ENABLE       0x01
 108   #define SSR_MODE_MASK         0x03
 109
 110 #define MC_SCRUB_CONTROL        0x4c
 111   #define STARTSCRUB            (1 << 24)
 112   #define SCRUBINTERVAL_MASK    0xffffff
 113
 114 #define MC_COR_ECC_CNT_0        0x80
 115 #define MC_COR_ECC_CNT_1        0x84
 116 #define MC_COR_ECC_CNT_2        0x88
 117 #define MC_COR_ECC_CNT_3        0x8c
 118 #define MC_COR_ECC_CNT_4        0x90
 119 #define MC_COR_ECC_CNT_5        0x94
 120
 121 #define DIMM_TOP_COR_ERR(r)                     (((r) >> 16) & 0x7fff)
 122 #define DIMM_BOT_COR_ERR(r)                     ((r) & 0x7fff)
 123
 124
 125         /* OFFSETS for Devices 4,5 and 6 Function 0 */
 126
 127 #define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
 128   #define THREE_DIMMS_PRESENT           (1 << 24)
 129   #define SINGLE_QUAD_RANK_PRESENT      (1 << 23)
 130   #define QUAD_RANK_PRESENT             (1 << 22)
 131   #define REGISTERED_DIMM               (1 << 15)
 132
 133 #define MC_CHANNEL_MAPPER       0x60
 134   #define RDLCH(r, ch)          ((((r) >> (3 + (ch * 6))) & 0x07) - 1)
 135   #define WRLCH(r, ch)          ((((r) >> (ch * 6)) & 0x07) - 1)
 136
 137 #define MC_CHANNEL_RANK_PRESENT 0x7c
 138   #define RANK_PRESENT_MASK             0xffff
 139
 140 #define MC_CHANNEL_ADDR_MATCH   0xf0
 141 #define MC_CHANNEL_ERROR_MASK   0xf8
 142 #define MC_CHANNEL_ERROR_INJECT 0xfc
 143   #define INJECT_ADDR_PARITY    0x10
 144   #define INJECT_ECC            0x08
 145   #define MASK_CACHELINE        0x06
 146   #define MASK_FULL_CACHELINE   0x06
 147   #define MASK_MSB32_CACHELINE  0x04
 148   #define MASK_LSB32_CACHELINE  0x02
 149   #define NO_MASK_CACHELINE     0x00
 150   #define REPEAT_EN             0x01
 151
 152         /* OFFSETS for Devices 4,5 and 6 Function 1 */
 153
 154 #define MC_DOD_CH_DIMM0         0x48
 155 #define MC_DOD_CH_DIMM1         0x4c
 156 #define MC_DOD_CH_DIMM2         0x50
 157   #define RANKOFFSET_MASK       ((1 << 12) | (1 << 11) | (1 << 10))
 158   #define RANKOFFSET(x)         ((x & RANKOFFSET_MASK) >> 10)
 159   #define DIMM_PRESENT_MASK     (1 << 9)
 160   #define DIMM_PRESENT(x)       (((x) & DIMM_PRESENT_MASK) >> 9)
 161   #define MC_DOD_NUMBANK_MASK           ((1 << 8) | (1 << 7))
 162   #define MC_DOD_NUMBANK(x)             (((x) & MC_DOD_NUMBANK_MASK) >> 7)
 163   #define MC_DOD_NUMRANK_MASK           ((1 << 6) | (1 << 5))
 164   #define MC_DOD_NUMRANK(x)             (((x) & MC_DOD_NUMRANK_MASK) >> 5)
 165   #define MC_DOD_NUMROW_MASK            ((1 << 4) | (1 << 3) | (1 << 2))
 166   #define MC_DOD_NUMROW(x)              (((x) & MC_DOD_NUMROW_MASK) >> 2)
 167   #define MC_DOD_NUMCOL_MASK            3
 168   #define MC_DOD_NUMCOL(x)              ((x) & MC_DOD_NUMCOL_MASK)
 169
 170 #define MC_RANK_PRESENT         0x7c
 171
 172 #define MC_SAG_CH_0     0x80
 173 #define MC_SAG_CH_1     0x84
 174 #define MC_SAG_CH_2     0x88
 175 #define MC_SAG_CH_3     0x8c
 176 #define MC_SAG_CH_4     0x90
 177 #define MC_SAG_CH_5     0x94
 178 #define MC_SAG_CH_6     0x98
 179 #define MC_SAG_CH_7     0x9c
 180
 181 #define MC_RIR_LIMIT_CH_0       0x40
 182 #define MC_RIR_LIMIT_CH_1       0x44
 183 #define MC_RIR_LIMIT_CH_2       0x48
 184 #define MC_RIR_LIMIT_CH_3       0x4C
 185 #define MC_RIR_LIMIT_CH_4       0x50
 186 #define MC_RIR_LIMIT_CH_5       0x54
 187 #define MC_RIR_LIMIT_CH_6       0x58
 188 #define MC_RIR_LIMIT_CH_7       0x5C
 189 #define MC_RIR_LIMIT_MASK       ((1 << 10) - 1)
 190
 191 #define MC_RIR_WAY_CH           0x80
 192   #define MC_RIR_WAY_OFFSET_MASK        (((1 << 14) - 1) & ~0x7)
 193   #define MC_RIR_WAY_RANK_MASK          0x7
 194
 195 /*
 196  * i7core structs
 197  */
 198
 199 #define NUM_CHANS 3
 200 #define MAX_DIMMS 3             /* Max DIMMS per channel */
 201 #define MAX_MCR_FUNC  4
 202 #define MAX_CHAN_FUNC 3
 203
 204 struct i7core_info {
 205         u32     mc_control;
 206         u32     mc_status;
 207         u32     max_dod;
 208         u32     ch_map;
 209 };
 210
 211
 212 struct i7core_inject {
 213         int     enable;
 214
 215         u32     section;
 216         u32     type;
 217         u32     eccmask;
 218
 219         /* Error address mask */
 220         int channel, dimm, rank, bank, page, col;
 221 };
 222
 223 struct i7core_channel {
 224         bool            is_3dimms_present;
 225         bool            is_single_4rank;
 226         bool            has_4rank;
 227         u32             dimms;
 228 };
 229
 230 struct pci_id_descr {
 231         int                     dev;
 232         int                     func;
 233         int                     dev_id;
 234         int                     optional;
 235 };
 236
 237 struct pci_id_table {
 238         const struct pci_id_descr       *descr;
 239         int                             n_devs;
 240 };
 241
 242 struct i7core_dev {
 243         struct list_head        list;
 244         u8                      socket;
 245         struct pci_dev          **pdev;
 246         int                     n_devs;
 247         struct mem_ctl_info     *mci;
 248 };
 249
 250 struct i7core_pvt {
 251         struct device *addrmatch_dev, *chancounts_dev;
 252
 253         struct pci_dev  *pci_noncore;
 254         struct pci_dev  *pci_mcr[MAX_MCR_FUNC + 1];
 255         struct pci_dev  *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
 256
 257         struct i7core_dev *i7core_dev;
 258
 259         struct i7core_info      info;
 260         struct i7core_inject    inject;
 261         struct i7core_channel   channel[NUM_CHANS];
 262
 263         int             ce_count_available;
 264
 265                         /* ECC corrected errors counts per udimm */
 266         unsigned long   udimm_ce_count[MAX_DIMMS];
 267         int             udimm_last_ce_count[MAX_DIMMS];
 268                         /* ECC corrected errors counts per rdimm */
 269         unsigned long   rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
 270         int             rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
 271
 272         bool            is_registered, enable_scrub;
 273
 274         /* Fifo double buffers */
 275         struct mce              mce_entry[MCE_LOG_LEN];
 276         struct mce              mce_outentry[MCE_LOG_LEN];
 277
 278         /* Fifo in/out counters */
 279         unsigned                mce_in, mce_out;
 280
 281         /* Count indicator to show errors not got */
 282         unsigned                mce_overrun;
 283
 284         /* DCLK Frequency used for computing scrub rate */
 285         int                     dclk_freq;
 286
 287         /* Struct to control EDAC polling */
 288         struct edac_pci_ctl_info *i7core_pci;
 289 };
 290
 291 #define PCI_DESCR(device, function, device_id)  \
 292         .dev = (device),                        \
 293         .func = (function),                     \
 294         .dev_id = (device_id)
 295
 296 static const struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
 297                 /* Memory controller */
 298         { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR)     },
 299         { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD)  },
 300                         /* Exists only for RDIMM */
 301         { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1  },
 302         { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
 303
 304                 /* Channel 0 */
 305         { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
 306         { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
 307         { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
 308         { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC)   },
 309
 310                 /* Channel 1 */
 311         { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
 312         { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
 313         { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
 314         { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC)   },
 315
 316                 /* Channel 2 */
 317         { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
 318         { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
 319         { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
 320         { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC)   },
 321
 322                 /* Generic Non-core registers */
 323         /*
 324          * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
 325          * On Xeon 55xx, however, it has a different id (8086:2c40). So,
 326          * the probing code needs to test for the other address in case of
 327          * failure of this one
 328          */
 329         { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE)  },
 330
 331 };
 332
 333 static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
 334         { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR)         },
 335         { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD)      },
 336         { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST)     },
 337
 338         { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
 339         { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
 340         { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
 341         { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC)   },
 342
 343         { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
 344         { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
 345         { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
 346         { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC)   },
 347
 348         /*
 349          * This is the PCI device has an alternate address on some
 350          * processors like Core i7 860
 351          */
 352         { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE)     },
 353 };
 354
 355 static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
 356                 /* Memory controller */
 357         { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2)     },
 358         { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2)  },
 359                         /* Exists only for RDIMM */
 360         { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1  },
 361         { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
 362
 363                 /* Channel 0 */
 364         { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
 365         { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
 366         { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
 367         { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2)   },
 368
 369                 /* Channel 1 */
 370         { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
 371         { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
 372         { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
 373         { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2)   },
 374
 375                 /* Channel 2 */
 376         { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
 377         { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
 378         { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
 379         { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2)   },
 380
 381                 /* Generic Non-core registers */
 382         { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2)  },
 383
 384 };
 385
 386 #define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
 387 static const struct pci_id_table pci_dev_table[] = {
 388         PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
 389         PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
 390         PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
 391         {0,}                    /* 0 terminated list. */
 392 };
 393
 394 /*
 395  *      pci_device_id   table for which devices we are looking for
 396  */
 397 static const struct pci_device_id i7core_pci_tbl[] = {
 398         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
 399         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
 400         {0,}                    /* 0 terminated list. */
 401 };
 402
 403 /****************************************************************************
 404                         Ancillary status routines
 405  ****************************************************************************/
 406
 407         /* MC_CONTROL bits */
 408 #define CH_ACTIVE(pvt, ch)      ((pvt)->info.mc_control & (1 << (8 + ch)))
 409 #define ECCx8(pvt)              ((pvt)->info.mc_control & (1 << 1))
 410
 411         /* MC_STATUS bits */
 412 #define ECC_ENABLED(pvt)        ((pvt)->info.mc_status & (1 << 4))
 413 #define CH_DISABLED(pvt, ch)    ((pvt)->info.mc_status & (1 << ch))
 414
 415         /* MC_MAX_DOD read functions */
 416 static inline int numdimms(u32 dimms)
 417 {
 418         return (dimms & 0x3) + 1;
 419 }
 420
 421 static inline int numrank(u32 rank)
 422 {
 423         static const int ranks[] = { 1, 2, 4, -EINVAL };
 424
 425         return ranks[rank & 0x3];
 426 }
 427
 428 static inline int numbank(u32 bank)
 429 {
 430         static const int banks[] = { 4, 8, 16, -EINVAL };
 431
 432         return banks[bank & 0x3];
 433 }
 434
 435 static inline int numrow(u32 row)
 436 {
 437         static const int rows[] = {
 438                 1 << 12, 1 << 13, 1 << 14, 1 << 15,
 439                 1 << 16, -EINVAL, -EINVAL, -EINVAL,
 440         };
 441
 442         return rows[row & 0x7];
 443 }
 444
 445 static inline int numcol(u32 col)
 446 {
 447         static const int cols[] = {
 448                 1 << 10, 1 << 11, 1 << 12, -EINVAL,
 449         };
 450         return cols[col & 0x3];
 451 }
 452
 453 static struct i7core_dev *get_i7core_dev(u8 socket)
 454 {
 455         struct i7core_dev *i7core_dev;
 456
 457         list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
 458                 if (i7core_dev->socket == socket)
 459                         return i7core_dev;
 460         }
 461
 462         return NULL;
 463 }
 464
 465 static struct i7core_dev *alloc_i7core_dev(u8 socket,
 466                                            const struct pci_id_table *table)
 467 {
 468         struct i7core_dev *i7core_dev;
 469
 470         i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
 471         if (!i7core_dev)
 472                 return NULL;
 473
 474         i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * table->n_devs,
 475                                    GFP_KERNEL);
 476         if (!i7core_dev->pdev) {
 477                 kfree(i7core_dev);
 478                 return NULL;
 479         }
 480
 481         i7core_dev->socket = socket;
 482         i7core_dev->n_devs = table->n_devs;
 483         list_add_tail(&i7core_dev->list, &i7core_edac_list);
 484
 485         return i7core_dev;
 486 }
 487
 488 static void free_i7core_dev(struct i7core_dev *i7core_dev)
 489 {
 490         list_del(&i7core_dev->list);
 491         kfree(i7core_dev->pdev);
 492         kfree(i7core_dev);
 493 }
 494
 495 /****************************************************************************
 496                         Memory check routines
 497  ****************************************************************************/
 498
 499 static int get_dimm_config(struct mem_ctl_info *mci)
 500 {
 501         struct i7core_pvt *pvt = mci->pvt_info;
 502         struct pci_dev *pdev;
 503         int i, j;
 504         enum edac_type mode;
 505         enum mem_type mtype;
 506         struct dimm_info *dimm;
 507
 508         /* Get data from the MC register, function 0 */
 509         pdev = pvt->pci_mcr[0];
 510         if (!pdev)
 511                 return -ENODEV;
 512
 513         /* Device 3 function 0 reads */
 514         pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
 515         pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
 516         pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
 517         pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
 518
 519         edac_dbg(0, "QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
 520                  pvt->i7core_dev->socket, pvt->info.mc_control,
 521                  pvt->info.mc_status, pvt->info.max_dod, pvt->info.ch_map);
 522
 523         if (ECC_ENABLED(pvt)) {
 524                 edac_dbg(0, "ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
 525                 if (ECCx8(pvt))
 526                         mode = EDAC_S8ECD8ED;
 527                 else
 528                         mode = EDAC_S4ECD4ED;
 529         } else {
 530                 edac_dbg(0, "ECC disabled\n");
 531                 mode = EDAC_NONE;
 532         }
 533
 534         /* FIXME: need to handle the error codes */
 535         edac_dbg(0, "DOD Max limits: DIMMS: %d, %d-ranked, %d-banked x%x x 0x%x\n",
 536                  numdimms(pvt->info.max_dod),
 537                  numrank(pvt->info.max_dod >> 2),
 538                  numbank(pvt->info.max_dod >> 4),
 539                  numrow(pvt->info.max_dod >> 6),
 540                  numcol(pvt->info.max_dod >> 9));
 541
 542         for (i = 0; i < NUM_CHANS; i++) {
 543                 u32 data, dimm_dod[3], value[8];
 544
 545                 if (!pvt->pci_ch[i][0])
 546                         continue;
 547
 548                 if (!CH_ACTIVE(pvt, i)) {
 549                         edac_dbg(0, "Channel %i is not active\n", i);
 550                         continue;
 551                 }
 552                 if (CH_DISABLED(pvt, i)) {
 553                         edac_dbg(0, "Channel %i is disabled\n", i);
 554                         continue;
 555                 }
 556
 557                 /* Devices 4-6 function 0 */
 558                 pci_read_config_dword(pvt->pci_ch[i][0],
 559                                 MC_CHANNEL_DIMM_INIT_PARAMS, &data);
 560
 561
 562                 if (data & THREE_DIMMS_PRESENT)
 563                         pvt->channel[i].is_3dimms_present = true;
 564
 565                 if (data & SINGLE_QUAD_RANK_PRESENT)
 566                         pvt->channel[i].is_single_4rank = true;
 567
 568                 if (data & QUAD_RANK_PRESENT)
 569                         pvt->channel[i].has_4rank = true;
 570
 571                 if (data & REGISTERED_DIMM)
 572                         mtype = MEM_RDDR3;
 573                 else
 574                         mtype = MEM_DDR3;
 575
 576                 /* Devices 4-6 function 1 */
 577                 pci_read_config_dword(pvt->pci_ch[i][1],
 578                                 MC_DOD_CH_DIMM0, &dimm_dod[0]);
 579                 pci_read_config_dword(pvt->pci_ch[i][1],
 580                                 MC_DOD_CH_DIMM1, &dimm_dod[1]);
 581                 pci_read_config_dword(pvt->pci_ch[i][1],
 582                                 MC_DOD_CH_DIMM2, &dimm_dod[2]);
 583
 584                 edac_dbg(0, "Ch%d phy rd%d, wr%d (0x%08x): %s%s%s%cDIMMs\n",
 585                          i,
 586                          RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
 587                          data,
 588                          pvt->channel[i].is_3dimms_present ? "3DIMMS " : "",
 589                          pvt->channel[i].is_3dimms_present ? "SINGLE_4R " : "",
 590                          pvt->channel[i].has_4rank ? "HAS_4R " : "",
 591                          (data & REGISTERED_DIMM) ? 'R' : 'U');
 592
 593                 for (j = 0; j < 3; j++) {
 594                         u32 banks, ranks, rows, cols;
 595                         u32 size, npages;
 596
 597                         if (!DIMM_PRESENT(dimm_dod[j]))
 598                                 continue;
 599
 600                         dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
 601                                        i, j, 0);
 602                         banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
 603                         ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
 604                         rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
 605                         cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
 606
 607                         /* DDR3 has 8 I/O banks */
 608                         size = (rows * cols * banks * ranks) >> (20 - 3);
 609
 610                         edac_dbg(0, "\tdimm %d %d Mb offset: %x, bank: %d, rank: %d, row: %#x, col: %#x\n",
 611                                  j, size,
 612                                  RANKOFFSET(dimm_dod[j]),
 613                                  banks, ranks, rows, cols);
 614
 615                         npages = MiB_TO_PAGES(size);
 616
 617                         dimm->nr_pages = npages;
 618
 619                         switch (banks) {
 620                         case 4:
 621                                 dimm->dtype = DEV_X4;
 622                                 break;
 623                         case 8:
 624                                 dimm->dtype = DEV_X8;
 625                                 break;
 626                         case 16:
 627                                 dimm->dtype = DEV_X16;
 628                                 break;
 629                         default:
 630                                 dimm->dtype = DEV_UNKNOWN;
 631                         }
 632
 633                         snprintf(dimm->label, sizeof(dimm->label),
 634                                  "CPU#%uChannel#%u_DIMM#%u",
 635                                  pvt->i7core_dev->socket, i, j);
 636                         dimm->grain = 8;
 637                         dimm->edac_mode = mode;
 638                         dimm->mtype = mtype;
 639                 }
 640
 641                 pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
 642                 pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
 643                 pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
 644                 pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
 645                 pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
 646                 pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
 647                 pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
 648                 pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
 649                 edac_dbg(1, "\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
 650                 for (j = 0; j < 8; j++)
 651                         edac_dbg(1, "\t\t%#x\t%#x\t%#x\n",
 652                                  (value[j] >> 27) & 0x1,
 653                                  (value[j] >> 24) & 0x7,
 654                                  (value[j] & ((1 << 24) - 1)));
 655         }
 656
 657         return 0;
 658 }
 659
 660 /****************************************************************************
 661                         Error insertion routines
 662  ****************************************************************************/
 663
 664 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
 665
 666 /* The i7core has independent error injection features per channel.
 667    However, to have a simpler code, we don't allow enabling error injection
 668    on more than one channel.
 669    Also, since a change at an inject parameter will be applied only at enable,
 670    we're disabling error injection on all write calls to the sysfs nodes that
 671    controls the error code injection.
 672  */
 673 static int disable_inject(const struct mem_ctl_info *mci)
 674 {
 675         struct i7core_pvt *pvt = mci->pvt_info;
 676
 677         pvt->inject.enable = 0;
 678
 679         if (!pvt->pci_ch[pvt->inject.channel][0])
 680                 return -ENODEV;
 681
 682         pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
 683                                 MC_CHANNEL_ERROR_INJECT, 0);
 684
 685         return 0;
 686 }
 687
 688 /*
 689  * i7core inject inject.section
 690  *
 691  *      accept and store error injection inject.section value
 692  *      bit 0 - refers to the lower 32-byte half cacheline
 693  *      bit 1 - refers to the upper 32-byte half cacheline
 694  */
 695 static ssize_t i7core_inject_section_store(struct device *dev,
 696                                            struct device_attribute *mattr,
 697                                            const char *data, size_t count)
 698 {
 699         struct mem_ctl_info *mci = to_mci(dev);
 700         struct i7core_pvt *pvt = mci->pvt_info;
 701         unsigned long value;
 702         int rc;
 703
 704         if (pvt->inject.enable)
 705                 disable_inject(mci);
 706
 707         rc = kstrtoul(data, 10, &value);
 708         if ((rc < 0) || (value > 3))
 709                 return -EIO;
 710
 711         pvt->inject.section = (u32) value;
 712         return count;
 713 }
 714
 715 static ssize_t i7core_inject_section_show(struct device *dev,
 716                                           struct device_attribute *mattr,
 717                                           char *data)
 718 {
 719         struct mem_ctl_info *mci = to_mci(dev);
 720         struct i7core_pvt *pvt = mci->pvt_info;
 721         return sprintf(data, "0x%08x\n", pvt->inject.section);
 722 }
 723
 724 /*
 725  * i7core inject.type
 726  *
 727  *      accept and store error injection inject.section value
 728  *      bit 0 - repeat enable - Enable error repetition
 729  *      bit 1 - inject ECC error
 730  *      bit 2 - inject parity error
 731  */
 732 static ssize_t i7core_inject_type_store(struct device *dev,
 733                                         struct device_attribute *mattr,
 734                                         const char *data, size_t count)
 735 {
 736         struct mem_ctl_info *mci = to_mci(dev);
 737 struct i7core_pvt *pvt = mci->pvt_info;
 738         unsigned long value;
 739         int rc;
 740
 741         if (pvt->inject.enable)
 742                 disable_inject(mci);
 743
 744         rc = kstrtoul(data, 10, &value);
 745         if ((rc < 0) || (value > 7))
 746                 return -EIO;
 747
 748         pvt->inject.type = (u32) value;
 749         return count;
 750 }
 751
 752 static ssize_t i7core_inject_type_show(struct device *dev,
 753                                        struct device_attribute *mattr,
 754                                        char *data)
 755 {
 756         struct mem_ctl_info *mci = to_mci(dev);
 757         struct i7core_pvt *pvt = mci->pvt_info;
 758
 759         return sprintf(data, "0x%08x\n", pvt->inject.type);
 760 }
 761
 762 /*
 763  * i7core_inject_inject.eccmask_store
 764  *
 765  * The type of error (UE/CE) will depend on the inject.eccmask value:
 766  *   Any bits set to a 1 will flip the corresponding ECC bit
 767  *   Correctable errors can be injected by flipping 1 bit or the bits within
 768  *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
 769  *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
 770  *   uncorrectable error to be injected.
 771  */
 772 static ssize_t i7core_inject_eccmask_store(struct device *dev,
 773                                            struct device_attribute *mattr,
 774                                            const char *data, size_t count)
 775 {
 776         struct mem_ctl_info *mci = to_mci(dev);
 777         struct i7core_pvt *pvt = mci->pvt_info;
 778         unsigned long value;
 779         int rc;
 780
 781         if (pvt->inject.enable)
 782                 disable_inject(mci);
 783
 784         rc = kstrtoul(data, 10, &value);
 785         if (rc < 0)
 786                 return -EIO;
 787
 788         pvt->inject.eccmask = (u32) value;
 789         return count;
 790 }
 791
 792 static ssize_t i7core_inject_eccmask_show(struct device *dev,
 793                                           struct device_attribute *mattr,
 794                                           char *data)
 795 {
 796         struct mem_ctl_info *mci = to_mci(dev);
 797         struct i7core_pvt *pvt = mci->pvt_info;
 798
 799         return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
 800 }
 801
 802 /*
 803  * i7core_addrmatch
 804  *
 805  * The type of error (UE/CE) will depend on the inject.eccmask value:
 806  *   Any bits set to a 1 will flip the corresponding ECC bit
 807  *   Correctable errors can be injected by flipping 1 bit or the bits within
 808  *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
 809  *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
 810  *   uncorrectable error to be injected.
 811  */
 812
 813 #define DECLARE_ADDR_MATCH(param, limit)                        \
 814 static ssize_t i7core_inject_store_##param(                     \
 815         struct device *dev,                                     \
 816         struct device_attribute *mattr,                         \
 817         const char *data, size_t count)                         \
 818 {                                                               \
 819         struct mem_ctl_info *mci = dev_get_drvdata(dev);        \
 820         struct i7core_pvt *pvt;                                 \
 821         long value;                                             \
 822         int rc;                                                 \
 823                                                                 \
 824         edac_dbg(1, "\n");                                      \
 825         pvt = mci->pvt_info;                                    \
 826                                                                 \
 827         if (pvt->inject.enable)                                 \
 828                 disable_inject(mci);                            \
 829                                                                 \
 830         if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
 831                 value = -1;                                     \
 832         else {                                                  \
 833                 rc = kstrtoul(data, 10, &value);                \
 834                 if ((rc < 0) || (value >= limit))               \
 835                         return -EIO;                            \
 836         }                                                       \
 837                                                                 \
 838         pvt->inject.param = value;                              \
 839                                                                 \
 840         return count;                                           \
 841 }                                                               \
 842                                                                 \
 843 static ssize_t i7core_inject_show_##param(                      \
 844         struct device *dev,                                     \
 845         struct device_attribute *mattr,                         \
 846         char *data)                                             \
 847 {                                                               \
 848         struct mem_ctl_info *mci = dev_get_drvdata(dev);        \
 849         struct i7core_pvt *pvt;                                 \
 850                                                                 \
 851         pvt = mci->pvt_info;                                    \
 852         edac_dbg(1, "pvt=%p\n", pvt);                           \
 853         if (pvt->inject.param < 0)                              \
 854                 return sprintf(data, "any\n");                  \
 855         else                                                    \
 856                 return sprintf(data, "%d\n", pvt->inject.param);\
 857 }
 858
 859 #define ATTR_ADDR_MATCH(param)                                  \
 860         static DEVICE_ATTR(param, S_IRUGO | S_IWUSR,            \
 861                     i7core_inject_show_##param,                 \
 862                     i7core_inject_store_##param)
 863
 864 DECLARE_ADDR_MATCH(channel, 3);
 865 DECLARE_ADDR_MATCH(dimm, 3);
 866 DECLARE_ADDR_MATCH(rank, 4);
 867 DECLARE_ADDR_MATCH(bank, 32);
 868 DECLARE_ADDR_MATCH(page, 0x10000);
 869 DECLARE_ADDR_MATCH(col, 0x4000);
 870
 871 ATTR_ADDR_MATCH(channel);
 872 ATTR_ADDR_MATCH(dimm);
 873 ATTR_ADDR_MATCH(rank);
 874 ATTR_ADDR_MATCH(bank);
 875 ATTR_ADDR_MATCH(page);
 876 ATTR_ADDR_MATCH(col);
 877
 878 static int write_and_test(struct pci_dev *dev, const int where, const u32 val)
 879 {
 880         u32 read;
 881         int count;
 882
 883         edac_dbg(0, "setting pci %02x:%02x.%x reg=%02x value=%08x\n",
 884                  dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
 885                  where, val);
 886
 887         for (count = 0; count < 10; count++) {
 888                 if (count)
 889                         msleep(100);
 890                 pci_write_config_dword(dev, where, val);
 891                 pci_read_config_dword(dev, where, &read);
 892
 893                 if (read == val)
 894                         return 0;
 895         }
 896
 897         i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
 898                 "write=%08x. Read=%08x\n",
 899                 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
 900                 where, val, read);
 901
 902         return -EINVAL;
 903 }
 904
 905 /*
 906  * This routine prepares the Memory Controller for error injection.
 907  * The error will be injected when some process tries to write to the
 908  * memory that matches the given criteria.
 909  * The criteria can be set in terms of a mask where dimm, rank, bank, page
 910  * and col can be specified.
 911  * A -1 value for any of the mask items will make the MCU to ignore
 912  * that matching criteria for error injection.
 913  *
 914  * It should be noticed that the error will only happen after a write operation
 915  * on a memory that matches the condition. if REPEAT_EN is not enabled at
 916  * inject mask, then it will produce just one error. Otherwise, it will repeat
 917  * until the injectmask would be cleaned.
 918  *
 919  * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
 920  *    is reliable enough to check if the MC is using the
 921  *    three channels. However, this is not clear at the datasheet.
 922  */
 923 static ssize_t i7core_inject_enable_store(struct device *dev,
 924                                           struct device_attribute *mattr,
 925                                           const char *data, size_t count)
 926 {
 927         struct mem_ctl_info *mci = to_mci(dev);
 928         struct i7core_pvt *pvt = mci->pvt_info;
 929         u32 injectmask;
 930         u64 mask = 0;
 931         int  rc;
 932         long enable;
 933
 934         if (!pvt->pci_ch[pvt->inject.channel][0])
 935                 return 0;
 936
 937         rc = kstrtoul(data, 10, &enable);
 938         if ((rc < 0))
 939                 return 0;
 940
 941         if (enable) {
 942                 pvt->inject.enable = 1;
 943         } else {
 944                 disable_inject(mci);
 945                 return count;
 946         }
 947
 948         /* Sets pvt->inject.dimm mask */
 949         if (pvt->inject.dimm < 0)
 950                 mask |= 1LL << 41;
 951         else {
 952                 if (pvt->channel[pvt->inject.channel].dimms > 2)
 953                         mask |= (pvt->inject.dimm & 0x3LL) << 35;
 954                 else
 955                         mask |= (pvt->inject.dimm & 0x1LL) << 36;
 956         }
 957
 958         /* Sets pvt->inject.rank mask */
 959         if (pvt->inject.rank < 0)
 960                 mask |= 1LL << 40;
 961         else {
 962                 if (pvt->channel[pvt->inject.channel].dimms > 2)
 963                         mask |= (pvt->inject.rank & 0x1LL) << 34;
 964                 else
 965                         mask |= (pvt->inject.rank & 0x3LL) << 34;
 966         }
 967
 968         /* Sets pvt->inject.bank mask */
 969         if (pvt->inject.bank < 0)
 970                 mask |= 1LL << 39;
 971         else
 972                 mask |= (pvt->inject.bank & 0x15LL) << 30;
 973
 974         /* Sets pvt->inject.page mask */
 975         if (pvt->inject.page < 0)
 976                 mask |= 1LL << 38;
 977         else
 978                 mask |= (pvt->inject.page & 0xffff) << 14;
 979
 980         /* Sets pvt->inject.column mask */
 981         if (pvt->inject.col < 0)
 982                 mask |= 1LL << 37;
 983         else
 984                 mask |= (pvt->inject.col & 0x3fff);
 985
 986         /*
 987          * bit    0: REPEAT_EN
 988          * bits 1-2: MASK_HALF_CACHELINE
 989          * bit    3: INJECT_ECC
 990          * bit    4: INJECT_ADDR_PARITY
 991          */
 992
 993         injectmask = (pvt->inject.type & 1) |
 994                      (pvt->inject.section & 0x3) << 1 |
 995                      (pvt->inject.type & 0x6) << (3 - 1);
 996
 997         /* Unlock writes to registers - this register is write only */
 998         pci_write_config_dword(pvt->pci_noncore,
 999                                MC_CFG_CONTROL, 0x2);
1000
1001         write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1002                                MC_CHANNEL_ADDR_MATCH, mask);
1003         write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1004                                MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
1005
1006         write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1007                                MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
1008
1009         write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1010                                MC_CHANNEL_ERROR_INJECT, injectmask);
1011
1012         /*
1013          * This is something undocumented, based on my tests
1014          * Without writing 8 to this register, errors aren't injected. Not sure
1015          * why.
1016          */
1017         pci_write_config_dword(pvt->pci_noncore,
1018                                MC_CFG_CONTROL, 8);
1019
1020         edac_dbg(0, "Error inject addr match 0x%016llx, ecc 0x%08x, inject 0x%08x\n",
1021                  mask, pvt->inject.eccmask, injectmask);
1022
1023
1024         return count;
1025 }
1026
1027 static ssize_t i7core_inject_enable_show(struct device *dev,
1028                                          struct device_attribute *mattr,
1029                                          char *data)
1030 {
1031         struct mem_ctl_info *mci = to_mci(dev);
1032         struct i7core_pvt *pvt = mci->pvt_info;
1033         u32 injectmask;
1034
1035         if (!pvt->pci_ch[pvt->inject.channel][0])
1036                 return 0;
1037
1038         pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
1039                                MC_CHANNEL_ERROR_INJECT, &injectmask);
1040
1041         edac_dbg(0, "Inject error read: 0x%018x\n", injectmask);
1042
1043         if (injectmask & 0x0c)
1044                 pvt->inject.enable = 1;
1045
1046         return sprintf(data, "%d\n", pvt->inject.enable);
1047 }
1048
1049 #define DECLARE_COUNTER(param)                                  \
1050 static ssize_t i7core_show_counter_##param(                     \
1051         struct device *dev,                                     \
1052         struct device_attribute *mattr,                         \
1053         char *data)                                             \
1054 {                                                               \
1055         struct mem_ctl_info *mci = dev_get_drvdata(dev);        \
1056         struct i7core_pvt *pvt = mci->pvt_info;                 \
1057                                                                 \
1058         edac_dbg(1, "\n");                                      \
1059         if (!pvt->ce_count_available || (pvt->is_registered))   \
1060                 return sprintf(data, "data unavailable\n");     \
1061         return sprintf(data, "%lu\n",                           \
1062                         pvt->udimm_ce_count[param]);            \
1063 }
1064
1065 #define ATTR_COUNTER(param)                                     \
1066         static DEVICE_ATTR(udimm##param, S_IRUGO | S_IWUSR,     \
1067                     i7core_show_counter_##param,                \
1068                     NULL)
1069
1070 DECLARE_COUNTER(0);
1071 DECLARE_COUNTER(1);
1072 DECLARE_COUNTER(2);
1073
1074 ATTR_COUNTER(0);
1075 ATTR_COUNTER(1);
1076 ATTR_COUNTER(2);
1077
1078 /*
1079  * inject_addrmatch device sysfs struct
1080  */
1081
1082 static struct attribute *i7core_addrmatch_attrs[] = {
1083         &dev_attr_channel.attr,
1084         &dev_attr_dimm.attr,
1085         &dev_attr_rank.attr,
1086         &dev_attr_bank.attr,
1087         &dev_attr_page.attr,
1088         &dev_attr_col.attr,
1089         NULL
1090 };
1091
1092 static struct attribute_group addrmatch_grp = {
1093         .attrs  = i7core_addrmatch_attrs,
1094 };
1095
1096 static const struct attribute_group *addrmatch_groups[] = {
1097         &addrmatch_grp,
1098         NULL
1099 };
1100
1101 static void addrmatch_release(struct device *device)
1102 {
1103         edac_dbg(1, "Releasing device %s\n", dev_name(device));
1104         kfree(device);
1105 }
1106
1107 static struct device_type addrmatch_type = {
1108         .groups         = addrmatch_groups,
1109         .release        = addrmatch_release,
1110 };
1111
1112 /*
1113  * all_channel_counts sysfs struct
1114  */
1115
1116 static struct attribute *i7core_udimm_counters_attrs[] = {
1117         &dev_attr_udimm0.attr,
1118         &dev_attr_udimm1.attr,
1119         &dev_attr_udimm2.attr,
1120         NULL
1121 };
1122
1123 static struct attribute_group all_channel_counts_grp = {
1124         .attrs  = i7core_udimm_counters_attrs,
1125 };
1126
1127 static const struct attribute_group *all_channel_counts_groups[] = {
1128         &all_channel_counts_grp,
1129         NULL
1130 };
1131
1132 static void all_channel_counts_release(struct device *device)
1133 {
1134         edac_dbg(1, "Releasing device %s\n", dev_name(device));
1135         kfree(device);
1136 }
1137
1138 static struct device_type all_channel_counts_type = {
1139         .groups         = all_channel_counts_groups,
1140         .release        = all_channel_counts_release,
1141 };
1142
1143 /*
1144  * inject sysfs attributes
1145  */
1146
1147 static DEVICE_ATTR(inject_section, S_IRUGO | S_IWUSR,
1148                    i7core_inject_section_show, i7core_inject_section_store);
1149
1150 static DEVICE_ATTR(inject_type, S_IRUGO | S_IWUSR,
1151                    i7core_inject_type_show, i7core_inject_type_store);
1152
1153
1154 static DEVICE_ATTR(inject_eccmask, S_IRUGO | S_IWUSR,
1155                    i7core_inject_eccmask_show, i7core_inject_eccmask_store);
1156
1157 static DEVICE_ATTR(inject_enable, S_IRUGO | S_IWUSR,
1158                    i7core_inject_enable_show, i7core_inject_enable_store);
1159
1160 static int i7core_create_sysfs_devices(struct mem_ctl_info *mci)
1161 {
1162         struct i7core_pvt *pvt = mci->pvt_info;
1163         int rc;
1164
1165         rc = device_create_file(&mci->dev, &dev_attr_inject_section);
1166         if (rc < 0)
1167                 return rc;
1168         rc = device_create_file(&mci->dev, &dev_attr_inject_type);
1169         if (rc < 0)
1170                 return rc;
1171         rc = device_create_file(&mci->dev, &dev_attr_inject_eccmask);
1172         if (rc < 0)
1173                 return rc;
1174         rc = device_create_file(&mci->dev, &dev_attr_inject_enable);
1175         if (rc < 0)
1176                 return rc;
1177
1178         pvt->addrmatch_dev = kzalloc(sizeof(*pvt->addrmatch_dev), GFP_KERNEL);
1179         if (!pvt->addrmatch_dev)
1180                 return rc;
1181
1182         pvt->addrmatch_dev->type = &addrmatch_type;
1183         pvt->addrmatch_dev->bus = mci->dev.bus;
1184         device_initialize(pvt->addrmatch_dev);
1185         pvt->addrmatch_dev->parent = &mci->dev;
1186         dev_set_name(pvt->addrmatch_dev, "inject_addrmatch");
1187         dev_set_drvdata(pvt->addrmatch_dev, mci);
1188
1189         edac_dbg(1, "creating %s\n", dev_name(pvt->addrmatch_dev));
1190
1191         rc = device_add(pvt->addrmatch_dev);
1192         if (rc < 0)
1193                 return rc;
1194
1195         if (!pvt->is_registered) {
1196                 pvt->chancounts_dev = kzalloc(sizeof(*pvt->chancounts_dev),
1197                                               GFP_KERNEL);
1198                 if (!pvt->chancounts_dev) {
1199                         put_device(pvt->addrmatch_dev);
1200                         device_del(pvt->addrmatch_dev);
1201                         return rc;
1202                 }
1203
1204                 pvt->chancounts_dev->type = &all_channel_counts_type;
1205                 pvt->chancounts_dev->bus = mci->dev.bus;
1206                 device_initialize(pvt->chancounts_dev);
1207                 pvt->chancounts_dev->parent = &mci->dev;
1208                 dev_set_name(pvt->chancounts_dev, "all_channel_counts");
1209                 dev_set_drvdata(pvt->chancounts_dev, mci);
1210
1211                 edac_dbg(1, "creating %s\n", dev_name(pvt->chancounts_dev));
1212
1213                 rc = device_add(pvt->chancounts_dev);
1214                 if (rc < 0)
1215                         return rc;
1216         }
1217         return 0;
1218 }
1219
1220 static void i7core_delete_sysfs_devices(struct mem_ctl_info *mci)
1221 {
1222         struct i7core_pvt *pvt = mci->pvt_info;
1223
1224         edac_dbg(1, "\n");
1225
1226         device_remove_file(&mci->dev, &dev_attr_inject_section);
1227         device_remove_file(&mci->dev, &dev_attr_inject_type);
1228         device_remove_file(&mci->dev, &dev_attr_inject_eccmask);
1229         device_remove_file(&mci->dev, &dev_attr_inject_enable);
1230
1231         if (!pvt->is_registered) {
1232                 put_device(pvt->chancounts_dev);
1233                 device_del(pvt->chancounts_dev);
1234         }
1235         put_device(pvt->addrmatch_dev);
1236         device_del(pvt->addrmatch_dev);
1237 }
1238
1239 /****************************************************************************
1240         Device initialization routines: put/get, init/exit
1241  ****************************************************************************/
1242
1243 /*
1244  *      i7core_put_all_devices  'put' all the devices that we have
1245  *                              reserved via 'get'
1246  */
1247 static void i7core_put_devices(struct i7core_dev *i7core_dev)
1248 {
1249         int i;
1250
1251         edac_dbg(0, "\n");
1252         for (i = 0; i < i7core_dev->n_devs; i++) {
1253                 struct pci_dev *pdev = i7core_dev->pdev[i];
1254                 if (!pdev)
1255                         continue;
1256                 edac_dbg(0, "Removing dev %02x:%02x.%d\n",
1257                          pdev->bus->number,
1258                          PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
1259                 pci_dev_put(pdev);
1260         }
1261 }
1262
1263 static void i7core_put_all_devices(void)
1264 {
1265         struct i7core_dev *i7core_dev, *tmp;
1266
1267         list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
1268                 i7core_put_devices(i7core_dev);
1269                 free_i7core_dev(i7core_dev);
1270         }
1271 }
1272
1273 static void __init i7core_xeon_pci_fixup(const struct pci_id_table *table)
1274 {
1275         struct pci_dev *pdev = NULL;
1276         int i;
1277
1278         /*
1279          * On Xeon 55xx, the Intel Quick Path Arch Generic Non-core pci buses
1280          * aren't announced by acpi. So, we need to use a legacy scan probing
1281          * to detect them
1282          */
1283         while (table && table->descr) {
1284                 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
1285                 if (unlikely(!pdev)) {
1286                         for (i = 0; i < MAX_SOCKET_BUSES; i++)
1287                                 pcibios_scan_specific_bus(255-i);
1288                 }
1289                 pci_dev_put(pdev);
1290                 table++;
1291         }
1292 }
1293
1294 static unsigned i7core_pci_lastbus(void)
1295 {
1296         int last_bus = 0, bus;
1297         struct pci_bus *b = NULL;
1298
1299         while ((b = pci_find_next_bus(b)) != NULL) {
1300                 bus = b->number;
1301                 edac_dbg(0, "Found bus %d\n", bus);
1302                 if (bus > last_bus)
1303                         last_bus = bus;
1304         }
1305
1306         edac_dbg(0, "Last bus %d\n", last_bus);
1307
1308         return last_bus;
1309 }
1310
1311 /*
1312  *      i7core_get_all_devices  Find and perform 'get' operation on the MCH's
1313  *                      device/functions we want to reference for this driver
1314  *
1315  *                      Need to 'get' device 16 func 1 and func 2
1316  */
1317 static int i7core_get_onedevice(struct pci_dev **prev,
1318                                 const struct pci_id_table *table,
1319                                 const unsigned devno,
1320                                 const unsigned last_bus)
1321 {
1322         struct i7core_dev *i7core_dev;
1323         const struct pci_id_descr *dev_descr = &table->descr[devno];
1324
1325         struct pci_dev *pdev = NULL;
1326         u8 bus = 0;
1327         u8 socket = 0;
1328
1329         pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
1330                               dev_descr->dev_id, *prev);
1331
1332         /*
1333          * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs
1334          * is at addr 8086:2c40, instead of 8086:2c41. So, we need
1335          * to probe for the alternate address in case of failure
1336          */
1337         if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev) {
1338                 pci_dev_get(*prev);     /* pci_get_device will put it */
1339                 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
1340                                       PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
1341         }
1342
1343         if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE &&
1344             !pdev) {
1345                 pci_dev_get(*prev);     /* pci_get_device will put it */
1346                 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
1347                                       PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
1348                                       *prev);
1349         }
1350
1351         if (!pdev) {
1352                 if (*prev) {
1353                         *prev = pdev;
1354                         return 0;
1355                 }
1356
1357                 if (dev_descr->optional)
1358                         return 0;
1359
1360                 if (devno == 0)
1361                         return -ENODEV;
1362
1363                 i7core_printk(KERN_INFO,
1364                         "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
1365                         dev_descr->dev, dev_descr->func,
1366                         PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1367
1368                 /* End of list, leave */
1369                 return -ENODEV;
1370         }
1371         bus = pdev->bus->number;
1372
1373         socket = last_bus - bus;
1374
1375         i7core_dev = get_i7core_dev(socket);
1376         if (!i7core_dev) {
1377                 i7core_dev = alloc_i7core_dev(socket, table);
1378                 if (!i7core_dev) {
1379                         pci_dev_put(pdev);
1380                         return -ENOMEM;
1381                 }
1382         }
1383
1384         if (i7core_dev->pdev[devno]) {
1385                 i7core_printk(KERN_ERR,
1386                         "Duplicated device for "
1387                         "dev %02x:%02x.%d PCI ID %04x:%04x\n",
1388                         bus, dev_descr->dev, dev_descr->func,
1389                         PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1390                 pci_dev_put(pdev);
1391                 return -ENODEV;
1392         }
1393
1394         i7core_dev->pdev[devno] = pdev;
1395
1396         /* Sanity check */
1397         if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
1398                         PCI_FUNC(pdev->devfn) != dev_descr->func)) {
1399                 i7core_printk(KERN_ERR,
1400                         "Device PCI ID %04x:%04x "
1401                         "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
1402                         PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
1403                         bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
1404                         bus, dev_descr->dev, dev_descr->func);
1405                 return -ENODEV;
1406         }
1407
1408         /* Be sure that the device is enabled */
1409         if (unlikely(pci_enable_device(pdev) < 0)) {
1410                 i7core_printk(KERN_ERR,
1411                         "Couldn't enable "
1412                         "dev %02x:%02x.%d PCI ID %04x:%04x\n",
1413                         bus, dev_descr->dev, dev_descr->func,
1414                         PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1415                 return -ENODEV;
1416         }
1417
1418         edac_dbg(0, "Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
1419                  socket, bus, dev_descr->dev,
1420                  dev_descr->func,
1421                  PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1422
1423         /*
1424          * As stated on drivers/pci/search.c, the reference count for
1425          * @from is always decremented if it is not %NULL. So, as we need
1426          * to get all devices up to null, we need to do a get for the device
1427          */
1428         pci_dev_get(pdev);
1429
1430         *prev = pdev;
1431
1432         return 0;
1433 }
1434
1435 static int i7core_get_all_devices(void)
1436 {
1437         int i, rc, last_bus;
1438         struct pci_dev *pdev = NULL;
1439         const struct pci_id_table *table = pci_dev_table;
1440
1441         last_bus = i7core_pci_lastbus();
1442
1443         while (table && table->descr) {
1444                 for (i = 0; i < table->n_devs; i++) {
1445                         pdev = NULL;
1446                         do {
1447                                 rc = i7core_get_onedevice(&pdev, table, i,
1448                                                           last_bus);
1449                                 if (rc < 0) {
1450                                         if (i == 0) {
1451                                                 i = table->n_devs;
1452                                                 break;
1453                                         }
1454                                         i7core_put_all_devices();
1455                                         return -ENODEV;
1456                                 }
1457                         } while (pdev);
1458                 }
1459                 table++;
1460         }
1461
1462         return 0;
1463 }
1464
1465 static int mci_bind_devs(struct mem_ctl_info *mci,
1466                          struct i7core_dev *i7core_dev)
1467 {
1468         struct i7core_pvt *pvt = mci->pvt_info;
1469         struct pci_dev *pdev;
1470         int i, func, slot;
1471         char *family;
1472
1473         pvt->is_registered = false;
1474         pvt->enable_scrub  = false;
1475         for (i = 0; i < i7core_dev->n_devs; i++) {
1476                 pdev = i7core_dev->pdev[i];
1477                 if (!pdev)
1478                         continue;
1479
1480                 func = PCI_FUNC(pdev->devfn);
1481                 slot = PCI_SLOT(pdev->devfn);
1482                 if (slot == 3) {
1483                         if (unlikely(func > MAX_MCR_FUNC))
1484                                 goto error;
1485                         pvt->pci_mcr[func] = pdev;
1486                 } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
1487                         if (unlikely(func > MAX_CHAN_FUNC))
1488                                 goto error;
1489                         pvt->pci_ch[slot - 4][func] = pdev;
1490                 } else if (!slot && !func) {
1491                         pvt->pci_noncore = pdev;
1492
1493                         /* Detect the processor family */
1494                         switch (pdev->device) {
1495                         case PCI_DEVICE_ID_INTEL_I7_NONCORE:
1496                                 family = "Xeon 35xx/ i7core";
1497                                 pvt->enable_scrub = false;
1498                                 break;
1499                         case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT:
1500                                 family = "i7-800/i5-700";
1501                                 pvt->enable_scrub = false;
1502                                 break;
1503                         case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE:
1504                                 family = "Xeon 34xx";
1505                                 pvt->enable_scrub = false;
1506                                 break;
1507                         case PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT:
1508                                 family = "Xeon 55xx";
1509                                 pvt->enable_scrub = true;
1510                                 break;
1511                         case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2:
1512                                 family = "Xeon 56xx / i7-900";
1513                                 pvt->enable_scrub = true;
1514                                 break;
1515                         default:
1516                                 family = "unknown";
1517                                 pvt->enable_scrub = false;
1518                         }
1519                         edac_dbg(0, "Detected a processor type %s\n", family);
1520                 } else
1521                         goto error;
1522
1523                 edac_dbg(0, "Associated fn %d.%d, dev = %p, socket %d\n",
1524                          PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
1525                          pdev, i7core_dev->socket);
1526
1527                 if (PCI_SLOT(pdev->devfn) == 3 &&
1528                         PCI_FUNC(pdev->devfn) == 2)
1529                         pvt->is_registered = true;
1530         }
1531
1532         return 0;
1533
1534 error:
1535         i7core_printk(KERN_ERR, "Device %d, function %d "
1536                       "is out of the expected range\n",
1537                       slot, func);
1538         return -EINVAL;
1539 }
1540
1541 /****************************************************************************
1542                         Error check routines
1543  ****************************************************************************/
1544
1545 static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
1546                                          const int chan,
1547                                          const int new0,
1548                                          const int new1,
1549                                          const int new2)
1550 {
1551         struct i7core_pvt *pvt = mci->pvt_info;
1552         int add0 = 0, add1 = 0, add2 = 0;
1553         /* Updates CE counters if it is not the first time here */
1554         if (pvt->ce_count_available) {
1555                 /* Updates CE counters */
1556
1557                 add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
1558                 add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
1559                 add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
1560
1561                 if (add2 < 0)
1562                         add2 += 0x7fff;
1563                 pvt->rdimm_ce_count[chan][2] += add2;
1564
1565                 if (add1 < 0)
1566                         add1 += 0x7fff;
1567                 pvt->rdimm_ce_count[chan][1] += add1;
1568
1569                 if (add0 < 0)
1570                         add0 += 0x7fff;
1571                 pvt->rdimm_ce_count[chan][0] += add0;
1572         } else
1573                 pvt->ce_count_available = 1;
1574
1575         /* Store the new values */
1576         pvt->rdimm_last_ce_count[chan][2] = new2;
1577         pvt->rdimm_last_ce_count[chan][1] = new1;
1578         pvt->rdimm_last_ce_count[chan][0] = new0;
1579
1580         /*updated the edac core */
1581         if (add0 != 0)
1582                 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add0,
1583                                      0, 0, 0,
1584                                      chan, 0, -1, "error", "");
1585         if (add1 != 0)
1586                 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add1,
1587                                      0, 0, 0,
1588                                      chan, 1, -1, "error", "");
1589         if (add2 != 0)
1590                 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add2,
1591                                      0, 0, 0,
1592                                      chan, 2, -1, "error", "");
1593 }
1594
1595 static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
1596 {
1597         struct i7core_pvt *pvt = mci->pvt_info;
1598         u32 rcv[3][2];
1599         int i, new0, new1, new2;
1600
1601         /*Read DEV 3: FUN 2:  MC_COR_ECC_CNT regs directly*/
1602         pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
1603                                                                 &rcv[0][0]);
1604         pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
1605                                                                 &rcv[0][1]);
1606         pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
1607                                                                 &rcv[1][0]);
1608         pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
1609                                                                 &rcv[1][1]);
1610         pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
1611                                                                 &rcv[2][0]);
1612         pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
1613                                                                 &rcv[2][1]);
1614         for (i = 0 ; i < 3; i++) {
1615                 edac_dbg(3, "MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
1616                          (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
1617                 /*if the channel has 3 dimms*/
1618                 if (pvt->channel[i].dimms > 2) {
1619                         new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
1620                         new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
1621                         new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
1622                 } else {
1623                         new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
1624                                         DIMM_BOT_COR_ERR(rcv[i][0]);
1625                         new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
1626                                         DIMM_BOT_COR_ERR(rcv[i][1]);
1627                         new2 = 0;
1628                 }
1629
1630                 i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
1631         }
1632 }
1633
1634 /* This function is based on the device 3 function 4 registers as described on:
1635  * Intel Xeon Processor 5500 Series Datasheet Volume 2
1636  *      http://www.intel.com/Assets/PDF/datasheet/321322.pdf
1637  * also available at:
1638  *      http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
1639  */
1640 static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
1641 {
1642         struct i7core_pvt *pvt = mci->pvt_info;
1643         u32 rcv1, rcv0;
1644         int new0, new1, new2;
1645
1646         if (!pvt->pci_mcr[4]) {
1647                 edac_dbg(0, "MCR registers not found\n");
1648                 return;
1649         }
1650
1651         /* Corrected test errors */
1652         pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
1653         pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
1654
1655         /* Store the new values */
1656         new2 = DIMM2_COR_ERR(rcv1);
1657         new1 = DIMM1_COR_ERR(rcv0);
1658         new0 = DIMM0_COR_ERR(rcv0);
1659
1660         /* Updates CE counters if it is not the first time here */
1661         if (pvt->ce_count_available) {
1662                 /* Updates CE counters */
1663                 int add0, add1, add2;
1664
1665                 add2 = new2 - pvt->udimm_last_ce_count[2];
1666                 add1 = new1 - pvt->udimm_last_ce_count[1];
1667                 add0 = new0 - pvt->udimm_last_ce_count[0];
1668
1669                 if (add2 < 0)
1670                         add2 += 0x7fff;
1671                 pvt->udimm_ce_count[2] += add2;
1672
1673                 if (add1 < 0)
1674                         add1 += 0x7fff;
1675                 pvt->udimm_ce_count[1] += add1;
1676
1677                 if (add0 < 0)
1678                         add0 += 0x7fff;
1679                 pvt->udimm_ce_count[0] += add0;
1680
1681                 if (add0 | add1 | add2)
1682                         i7core_printk(KERN_ERR, "New Corrected error(s): "
1683                                       "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
1684                                       add0, add1, add2);
1685         } else
1686                 pvt->ce_count_available = 1;
1687
1688         /* Store the new values */
1689         pvt->udimm_last_ce_count[2] = new2;
1690         pvt->udimm_last_ce_count[1] = new1;
1691         pvt->udimm_last_ce_count[0] = new0;
1692 }
1693
1694 /*
1695  * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
1696  * Architectures Software Developer’s Manual Volume 3B.
1697  * Nehalem are defined as family 0x06, model 0x1a
1698  *
1699  * The MCA registers used here are the following ones:
1700  *     struct mce field MCA Register
1701  *     m->status        MSR_IA32_MC8_STATUS
1702  *     m->addr          MSR_IA32_MC8_ADDR
1703  *     m->misc          MSR_IA32_MC8_MISC
1704  * In the case of Nehalem, the error information is masked at .status and .misc
1705  * fields
1706  */
1707 static void i7core_mce_output_error(struct mem_ctl_info *mci,
1708                                     const struct mce *m)
1709 {
1710         struct i7core_pvt *pvt = mci->pvt_info;
1711         char *type, *optype, *err;
1712         enum hw_event_mc_err_type tp_event;
1713         unsigned long error = m->status & 0x1ff0000l;
1714         bool uncorrected_error = m->mcgstatus & 1ll << 61;
1715         bool ripv = m->mcgstatus & 1;
1716         u32 optypenum = (m->status >> 4) & 0x07;
1717         u32 core_err_cnt = (m->status >> 38) & 0x7fff;
1718         u32 dimm = (m->misc >> 16) & 0x3;
1719         u32 channel = (m->misc >> 18) & 0x3;
1720         u32 syndrome = m->misc >> 32;
1721         u32 errnum = find_first_bit(&error, 32);
1722
1723         if (uncorrected_error) {
1724                 if (ripv) {
1725                         type = "FATAL";
1726                         tp_event = HW_EVENT_ERR_FATAL;
1727                 } else {
1728                         type = "NON_FATAL";
1729                         tp_event = HW_EVENT_ERR_UNCORRECTED;
1730                 }
1731         } else {
1732                 type = "CORRECTED";
1733                 tp_event = HW_EVENT_ERR_CORRECTED;
1734         }
1735
1736         switch (optypenum) {
1737         case 0:
1738                 optype = "generic undef request";
1739                 break;
1740         case 1:
1741                 optype = "read error";
1742                 break;
1743         case 2:
1744                 optype = "write error";
1745                 break;
1746         case 3:
1747                 optype = "addr/cmd error";
1748                 break;
1749         case 4:
1750                 optype = "scrubbing error";
1751                 break;
1752         default:
1753                 optype = "reserved";
1754                 break;
1755         }
1756
1757         switch (errnum) {
1758         case 16:
1759                 err = "read ECC error";
1760                 break;
1761         case 17:
1762                 err = "RAS ECC error";
1763                 break;
1764         case 18:
1765                 err = "write parity error";
1766                 break;
1767         case 19:
1768                 err = "redundacy loss";
1769                 break;
1770         case 20:
1771                 err = "reserved";
1772                 break;
1773         case 21:
1774                 err = "memory range error";
1775                 break;
1776         case 22:
1777                 err = "RTID out of range";
1778                 break;
1779         case 23:
1780                 err = "address parity error";
1781                 break;
1782         case 24:
1783                 err = "byte enable parity error";
1784                 break;
1785         default:
1786                 err = "unknown";
1787         }
1788
1789         /*
1790          * Call the helper to output message
1791          * FIXME: what to do if core_err_cnt > 1? Currently, it generates
1792          * only one event
1793          */
1794         if (uncorrected_error || !pvt->is_registered)
1795                 edac_mc_handle_error(tp_event, mci, core_err_cnt,
1796                                      m->addr >> PAGE_SHIFT,
1797                                      m->addr & ~PAGE_MASK,
1798                                      syndrome,
1799                                      channel, dimm, -1,
1800                                      err, optype);
1801 }
1802
1803 /*
1804  *      i7core_check_error      Retrieve and process errors reported by the
1805  *                              hardware. Called by the Core module.
1806  */
1807 static void i7core_check_error(struct mem_ctl_info *mci)
1808 {
1809         struct i7core_pvt *pvt = mci->pvt_info;
1810         int i;
1811         unsigned count = 0;
1812         struct mce *m;
1813
1814         /*
1815          * MCE first step: Copy all mce errors into a temporary buffer
1816          * We use a double buffering here, to reduce the risk of
1817          * losing an error.
1818          */
1819         smp_rmb();
1820         count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
1821                 % MCE_LOG_LEN;
1822         if (!count)
1823                 goto check_ce_error;
1824
1825         m = pvt->mce_outentry;
1826         if (pvt->mce_in + count > MCE_LOG_LEN) {
1827                 unsigned l = MCE_LOG_LEN - pvt->mce_in;
1828
1829                 memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
1830                 smp_wmb();
1831                 pvt->mce_in = 0;
1832                 count -= l;
1833                 m += l;
1834         }
1835         memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
1836         smp_wmb();
1837         pvt->mce_in += count;
1838
1839         smp_rmb();
1840         if (pvt->mce_overrun) {
1841                 i7core_printk(KERN_ERR, "Lost %d memory errors\n",
1842                               pvt->mce_overrun);
1843                 smp_wmb();
1844                 pvt->mce_overrun = 0;
1845         }
1846
1847         /*
1848          * MCE second step: parse errors and display
1849          */
1850         for (i = 0; i < count; i++)
1851                 i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
1852
1853         /*
1854          * Now, let's increment CE error counts
1855          */
1856 check_ce_error:
1857         if (!pvt->is_registered)
1858                 i7core_udimm_check_mc_ecc_err(mci);
1859         else
1860                 i7core_rdimm_check_mc_ecc_err(mci);
1861 }
1862
1863 /*
1864  * i7core_mce_check_error       Replicates mcelog routine to get errors
1865  *                              This routine simply queues mcelog errors, and
1866  *                              return. The error itself should be handled later
1867  *                              by i7core_check_error.
1868  * WARNING: As this routine should be called at NMI time, extra care should
1869  * be taken to avoid deadlocks, and to be as fast as possible.
1870  */
1871 static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
1872                                   void *data)
1873 {
1874         struct mce *mce = (struct mce *)data;
1875         struct i7core_dev *i7_dev;
1876         struct mem_ctl_info *mci;
1877         struct i7core_pvt *pvt;
1878
1879         i7_dev = get_i7core_dev(mce->socketid);
1880         if (!i7_dev)
1881                 return NOTIFY_BAD;
1882
1883         mci = i7_dev->mci;
1884         pvt = mci->pvt_info;
1885
1886         /*
1887          * Just let mcelog handle it if the error is
1888          * outside the memory controller
1889          */
1890         if (((mce->status & 0xffff) >> 7) != 1)
1891                 return NOTIFY_DONE;
1892
1893         /* Bank 8 registers are the only ones that we know how to handle */
1894         if (mce->bank != 8)
1895                 return NOTIFY_DONE;
1896
1897         smp_rmb();
1898         if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
1899                 smp_wmb();
1900                 pvt->mce_overrun++;
1901                 return NOTIFY_DONE;
1902         }
1903
1904         /* Copy memory error at the ringbuffer */
1905         memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
1906         smp_wmb();
1907         pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
1908
1909         /* Handle fatal errors immediately */
1910         if (mce->mcgstatus & 1)
1911                 i7core_check_error(mci);
1912
1913         /* Advise mcelog that the errors were handled */
1914         return NOTIFY_STOP;
1915 }
1916
1917 static struct notifier_block i7_mce_dec = {
1918         .notifier_call  = i7core_mce_check_error,
1919 };
1920
1921 struct memdev_dmi_entry {
1922         u8 type;
1923         u8 length;
1924         u16 handle;
1925         u16 phys_mem_array_handle;
1926         u16 mem_err_info_handle;
1927         u16 total_width;
1928         u16 data_width;
1929         u16 size;
1930         u8 form;
1931         u8 device_set;
1932         u8 device_locator;
1933         u8 bank_locator;
1934         u8 memory_type;
1935         u16 type_detail;
1936         u16 speed;
1937         u8 manufacturer;
1938         u8 serial_number;
1939         u8 asset_tag;
1940         u8 part_number;
1941         u8 attributes;
1942         u32 extended_size;
1943         u16 conf_mem_clk_speed;
1944 } __attribute__((__packed__));
1945
1946
1947 /*
1948  * Decode the DRAM Clock Frequency, be paranoid, make sure that all
1949  * memory devices show the same speed, and if they don't then consider
1950  * all speeds to be invalid.
1951  */
1952 static void decode_dclk(const struct dmi_header *dh, void *_dclk_freq)
1953 {
1954         int *dclk_freq = _dclk_freq;
1955         u16 dmi_mem_clk_speed;
1956
1957         if (*dclk_freq == -1)
1958                 return;
1959
1960         if (dh->type == DMI_ENTRY_MEM_DEVICE) {
1961                 struct memdev_dmi_entry *memdev_dmi_entry =
1962                         (struct memdev_dmi_entry *)dh;
1963                 unsigned long conf_mem_clk_speed_offset =
1964                         (unsigned long)&memdev_dmi_entry->conf_mem_clk_speed -
1965                         (unsigned long)&memdev_dmi_entry->type;
1966                 unsigned long speed_offset =
1967                         (unsigned long)&memdev_dmi_entry->speed -
1968                         (unsigned long)&memdev_dmi_entry->type;
1969
1970                 /* Check that a DIMM is present */
1971                 if (memdev_dmi_entry->size == 0)
1972                         return;
1973
1974                 /*
1975                  * Pick the configured speed if it's available, otherwise
1976                  * pick the DIMM speed, or we don't have a speed.
1977                  */
1978                 if (memdev_dmi_entry->length > conf_mem_clk_speed_offset) {
1979                         dmi_mem_clk_speed =
1980                                 memdev_dmi_entry->conf_mem_clk_speed;
1981                 } else if (memdev_dmi_entry->length > speed_offset) {
1982                         dmi_mem_clk_speed = memdev_dmi_entry->speed;
1983                 } else {
1984                         *dclk_freq = -1;
1985                         return;
1986                 }
1987
1988                 if (*dclk_freq == 0) {
1989                         /* First pass, speed was 0 */
1990                         if (dmi_mem_clk_speed > 0) {
1991                                 /* Set speed if a valid speed is read */
1992                                 *dclk_freq = dmi_mem_clk_speed;
1993                         } else {
1994                                 /* Otherwise we don't have a valid speed */
1995                                 *dclk_freq = -1;
1996                         }
1997                 } else if (*dclk_freq > 0 &&
1998                            *dclk_freq != dmi_mem_clk_speed) {
1999                         /*
2000                          * If we have a speed, check that all DIMMS are the same
2001                          * speed, otherwise set the speed as invalid.
2002                          */
2003                         *dclk_freq = -1;
2004                 }
2005         }
2006 }
2007
2008 /*
2009  * The default DCLK frequency is used as a fallback if we
2010  * fail to find anything reliable in the DMI. The value
2011  * is taken straight from the datasheet.
2012  */
2013 #define DEFAULT_DCLK_FREQ 800
2014
2015 static int get_dclk_freq(void)
2016 {
2017         int dclk_freq = 0;
2018
2019         dmi_walk(decode_dclk, (void *)&dclk_freq);
2020
2021         if (dclk_freq < 1)
2022                 return DEFAULT_DCLK_FREQ;
2023
2024         return dclk_freq;
2025 }
2026
2027 /*
2028  * set_sdram_scrub_rate         This routine sets byte/sec bandwidth scrub rate
2029  *                              to hardware according to SCRUBINTERVAL formula
2030  *                              found in datasheet.
2031  */
2032 static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
2033 {
2034         struct i7core_pvt *pvt = mci->pvt_info;
2035         struct pci_dev *pdev;
2036         u32 dw_scrub;
2037         u32 dw_ssr;
2038
2039         /* Get data from the MC register, function 2 */
2040         pdev = pvt->pci_mcr[2];
2041         if (!pdev)
2042                 return -ENODEV;
2043
2044         pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
2045
2046         if (new_bw == 0) {
2047                 /* Prepare to disable petrol scrub */
2048                 dw_scrub &= ~STARTSCRUB;
2049                 /* Stop the patrol scrub engine */
2050                 write_and_test(pdev, MC_SCRUB_CONTROL,
2051                                dw_scrub & ~SCRUBINTERVAL_MASK);
2052
2053                 /* Get current status of scrub rate and set bit to disable */
2054                 pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
2055                 dw_ssr &= ~SSR_MODE_MASK;
2056                 dw_ssr |= SSR_MODE_DISABLE;
2057         } else {
2058                 const int cache_line_size = 64;
2059                 const u32 freq_dclk_mhz = pvt->dclk_freq;
2060                 unsigned long long scrub_interval;
2061                 /*
2062                  * Translate the desired scrub rate to a register value and
2063                  * program the corresponding register value.
2064                  */
2065                 scrub_interval = (unsigned long long)freq_dclk_mhz *
2066                         cache_line_size * 1000000;
2067                 do_div(scrub_interval, new_bw);
2068
2069                 if (!scrub_interval || scrub_interval > SCRUBINTERVAL_MASK)
2070                         return -EINVAL;
2071
2072                 dw_scrub = SCRUBINTERVAL_MASK & scrub_interval;
2073
2074                 /* Start the patrol scrub engine */
2075                 pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
2076                                        STARTSCRUB | dw_scrub);
2077
2078                 /* Get current status of scrub rate and set bit to enable */
2079                 pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
2080                 dw_ssr &= ~SSR_MODE_MASK;
2081                 dw_ssr |= SSR_MODE_ENABLE;
2082         }
2083         /* Disable or enable scrubbing */
2084         pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
2085
2086         return new_bw;
2087 }
2088
2089 /*
2090  * get_sdram_scrub_rate         This routine convert current scrub rate value
2091  *                              into byte/sec bandwidth according to
2092  *                              SCRUBINTERVAL formula found in datasheet.
2093  */
2094 static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
2095 {
2096         struct i7core_pvt *pvt = mci->pvt_info;
2097         struct pci_dev *pdev;
2098         const u32 cache_line_size = 64;
2099         const u32 freq_dclk_mhz = pvt->dclk_freq;
2100         unsigned long long scrub_rate;
2101         u32 scrubval;
2102
2103         /* Get data from the MC register, function 2 */
2104         pdev = pvt->pci_mcr[2];
2105         if (!pdev)
2106                 return -ENODEV;
2107
2108         /* Get current scrub control data */
2109         pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
2110
2111         /* Mask highest 8-bits to 0 */
2112         scrubval &=  SCRUBINTERVAL_MASK;
2113         if (!scrubval)
2114                 return 0;
2115
2116         /* Calculate scrub rate value into byte/sec bandwidth */
2117         scrub_rate =  (unsigned long long)freq_dclk_mhz *
2118                 1000000 * cache_line_size;
2119         do_div(scrub_rate, scrubval);
2120         return (int)scrub_rate;
2121 }
2122
2123 static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
2124 {
2125         struct i7core_pvt *pvt = mci->pvt_info;
2126         u32 pci_lock;
2127
2128         /* Unlock writes to pci registers */
2129         pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
2130         pci_lock &= ~0x3;
2131         pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
2132                                pci_lock | MC_CFG_UNLOCK);
2133
2134         mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
2135         mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
2136 }
2137
2138 static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
2139 {
2140         struct i7core_pvt *pvt = mci->pvt_info;
2141         u32 pci_lock;
2142
2143         /* Lock writes to pci registers */
2144         pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
2145         pci_lock &= ~0x3;
2146         pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
2147                                pci_lock | MC_CFG_LOCK);
2148 }
2149
2150 static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
2151 {
2152         pvt->i7core_pci = edac_pci_create_generic_ctl(
2153                                                 &pvt->i7core_dev->pdev[0]->dev,
2154                                                 EDAC_MOD_STR);
2155         if (unlikely(!pvt->i7core_pci))
2156                 i7core_printk(KERN_WARNING,
2157                               "Unable to setup PCI error report via EDAC\n");
2158 }
2159
2160 static void i7core_pci_ctl_release(struct i7core_pvt *pvt)
2161 {
2162         if (likely(pvt->i7core_pci))
2163                 edac_pci_release_generic_ctl(pvt->i7core_pci);
2164         else
2165                 i7core_printk(KERN_ERR,
2166                                 "Couldn't find mem_ctl_info for socket %d\n",
2167                                 pvt->i7core_dev->socket);
2168         pvt->i7core_pci = NULL;
2169 }
2170
2171 static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
2172 {
2173         struct mem_ctl_info *mci = i7core_dev->mci;
2174         struct i7core_pvt *pvt;
2175
2176         if (unlikely(!mci || !mci->pvt_info)) {
2177                 edac_dbg(0, "MC: dev = %p\n", &i7core_dev->pdev[0]->dev);
2178
2179                 i7core_printk(KERN_ERR, "Couldn't find mci handler\n");
2180                 return;
2181         }
2182
2183         pvt = mci->pvt_info;
2184
2185         edac_dbg(0, "MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev);
2186
2187         /* Disable scrubrate setting */
2188         if (pvt->enable_scrub)
2189                 disable_sdram_scrub_setting(mci);
2190
2191         /* Disable EDAC polling */
2192         i7core_pci_ctl_release(pvt);
2193
2194         /* Remove MC sysfs nodes */
2195         i7core_delete_sysfs_devices(mci);
2196         edac_mc_del_mc(mci->pdev);
2197
2198         edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
2199         kfree(mci->ctl_name);
2200         edac_mc_free(mci);
2201         i7core_dev->mci = NULL;
2202 }
2203
2204 static int i7core_register_mci(struct i7core_dev *i7core_dev)
2205 {
2206         struct mem_ctl_info *mci;
2207         struct i7core_pvt *pvt;
2208         int rc;
2209         struct edac_mc_layer layers[2];
2210
2211         /* allocate a new MC control structure */
2212
2213         layers[0].type = EDAC_MC_LAYER_CHANNEL;
2214         layers[0].size = NUM_CHANS;
2215         layers[0].is_virt_csrow = false;
2216         layers[1].type = EDAC_MC_LAYER_SLOT;
2217         layers[1].size = MAX_DIMMS;
2218         layers[1].is_virt_csrow = true;
2219         mci = edac_mc_alloc(i7core_dev->socket, ARRAY_SIZE(layers), layers,
2220                             sizeof(*pvt));
2221         if (unlikely(!mci))
2222                 return -ENOMEM;
2223
2224         edac_dbg(0, "MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev);
2225
2226         pvt = mci->pvt_info;
2227         memset(pvt, 0, sizeof(*pvt));
2228
2229         /* Associates i7core_dev and mci for future usage */
2230         pvt->i7core_dev = i7core_dev;
2231         i7core_dev->mci = mci;
2232
2233         /*
2234          * FIXME: how to handle RDDR3 at MCI level? It is possible to have
2235          * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
2236          * memory channels
2237          */
2238         mci->mtype_cap = MEM_FLAG_DDR3;
2239         mci->edac_ctl_cap = EDAC_FLAG_NONE;
2240         mci->edac_cap = EDAC_FLAG_NONE;
2241         mci->mod_name = "i7core_edac.c";
2242         mci->mod_ver = I7CORE_REVISION;
2243         mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
2244                                   i7core_dev->socket);
2245         mci->dev_name = pci_name(i7core_dev->pdev[0]);
2246         mci->ctl_page_to_phys = NULL;
2247
2248         /* Store pci devices at mci for faster access */
2249         rc = mci_bind_devs(mci, i7core_dev);
2250         if (unlikely(rc < 0))
2251                 goto fail0;
2252
2253
2254         /* Get dimm basic config */
2255         get_dimm_config(mci);
2256         /* record ptr to the generic device */
2257         mci->pdev = &i7core_dev->pdev[0]->dev;
2258         /* Set the function pointer to an actual operation function */
2259         mci->edac_check = i7core_check_error;
2260
2261         /* Enable scrubrate setting */
2262         if (pvt->enable_scrub)
2263                 enable_sdram_scrub_setting(mci);
2264
2265         /* add this new MC control structure to EDAC's list of MCs */
2266         if (unlikely(edac_mc_add_mc(mci))) {
2267                 edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
2268                 /* FIXME: perhaps some code should go here that disables error
2269                  * reporting if we just enabled it
2270                  */
2271
2272                 rc = -EINVAL;
2273                 goto fail0;
2274         }
2275         if (i7core_create_sysfs_devices(mci)) {
2276                 edac_dbg(0, "MC: failed to create sysfs nodes\n");
2277                 edac_mc_del_mc(mci->pdev);
2278                 rc = -EINVAL;
2279                 goto fail0;
2280         }
2281
2282         /* Default error mask is any memory */
2283         pvt->inject.channel = 0;
2284         pvt->inject.dimm = -1;
2285         pvt->inject.rank = -1;
2286         pvt->inject.bank = -1;
2287         pvt->inject.page = -1;
2288         pvt->inject.col = -1;
2289
2290         /* allocating generic PCI control info */
2291         i7core_pci_ctl_create(pvt);
2292
2293         /* DCLK for scrub rate setting */
2294         pvt->dclk_freq = get_dclk_freq();
2295
2296         return 0;
2297
2298 fail0:
2299         kfree(mci->ctl_name);
2300         edac_mc_free(mci);
2301         i7core_dev->mci = NULL;
2302         return rc;
2303 }
2304
2305 /*
2306  *      i7core_probe    Probe for ONE instance of device to see if it is
2307  *                      present.
2308  *      return:
2309  *              0 for FOUND a device
2310  *              < 0 for error code
2311  */
2312
2313 static int i7core_probe(struct pci_dev *pdev, const struct pci_device_id *id)
2314 {
2315         int rc, count = 0;
2316         struct i7core_dev *i7core_dev;
2317
2318         /* get the pci devices we want to reserve for our use */
2319         mutex_lock(&i7core_edac_lock);
2320
2321         /*
2322          * All memory controllers are allocated at the first pass.
2323          */
2324         if (unlikely(probed >= 1)) {
2325                 mutex_unlock(&i7core_edac_lock);
2326                 return -ENODEV;
2327         }
2328         probed++;
2329
2330         rc = i7core_get_all_devices();
2331         if (unlikely(rc < 0))
2332                 goto fail0;
2333
2334         list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
2335                 count++;
2336                 rc = i7core_register_mci(i7core_dev);
2337                 if (unlikely(rc < 0))
2338                         goto fail1;
2339         }
2340
2341         /*
2342          * Nehalem-EX uses a different memory controller. However, as the
2343          * memory controller is not visible on some Nehalem/Nehalem-EP, we
2344          * need to indirectly probe via a X58 PCI device. The same devices
2345          * are found on (some) Nehalem-EX. So, on those machines, the
2346          * probe routine needs to return -ENODEV, as the actual Memory
2347          * Controller registers won't be detected.
2348          */
2349         if (!count) {
2350                 rc = -ENODEV;
2351                 goto fail1;
2352         }
2353
2354         i7core_printk(KERN_INFO,
2355                       "Driver loaded, %d memory controller(s) found.\n",
2356                       count);
2357
2358         mutex_unlock(&i7core_edac_lock);
2359         return 0;
2360
2361 fail1:
2362         list_for_each_entry(i7core_dev, &i7core_edac_list, list)
2363                 i7core_unregister_mci(i7core_dev);
2364
2365         i7core_put_all_devices();
2366 fail0:
2367         mutex_unlock(&i7core_edac_lock);
2368         return rc;
2369 }
2370
2371 /*
2372  *      i7core_remove   destructor for one instance of device
2373  *
2374  */
2375 static void i7core_remove(struct pci_dev *pdev)
2376 {
2377         struct i7core_dev *i7core_dev;
2378
2379         edac_dbg(0, "\n");
2380
2381         /*
2382          * we have a trouble here: pdev value for removal will be wrong, since
2383          * it will point to the X58 register used to detect that the machine
2384          * is a Nehalem or upper design. However, due to the way several PCI
2385          * devices are grouped together to provide MC functionality, we need
2386          * to use a different method for releasing the devices
2387          */
2388
2389         mutex_lock(&i7core_edac_lock);
2390
2391         if (unlikely(!probed)) {
2392                 mutex_unlock(&i7core_edac_lock);
2393                 return;
2394         }
2395
2396         list_for_each_entry(i7core_dev, &i7core_edac_list, list)
2397                 i7core_unregister_mci(i7core_dev);
2398
2399         /* Release PCI resources */
2400         i7core_put_all_devices();
2401
2402         probed--;
2403
2404         mutex_unlock(&i7core_edac_lock);
2405 }
2406
2407 MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
2408
2409 /*
2410  *      i7core_driver   pci_driver structure for this module
2411  *
2412  */
2413 static struct pci_driver i7core_driver = {
2414         .name     = "i7core_edac",
2415         .probe    = i7core_probe,
2416         .remove   = i7core_remove,
2417         .id_table = i7core_pci_tbl,
2418 };
2419
2420 /*
2421  *      i7core_init             Module entry function
2422  *                      Try to initialize this module for its devices
2423  */
2424 static int __init i7core_init(void)
2425 {
2426         int pci_rc;
2427
2428         edac_dbg(2, "\n");
2429
2430         /* Ensure that the OPSTATE is set correctly for POLL or NMI */
2431         opstate_init();
2432
2433         if (use_pci_fixup)
2434                 i7core_xeon_pci_fixup(pci_dev_table);
2435
2436         pci_rc = pci_register_driver(&i7core_driver);
2437
2438         if (pci_rc >= 0) {
2439                 mce_register_decode_chain(&i7_mce_dec);
2440                 return 0;
2441         }
2442
2443         i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
2444                       pci_rc);
2445
2446         return pci_rc;
2447 }
2448
2449 /*
2450  *      i7core_exit()   Module exit function
2451  *                      Unregister the driver
2452  */
2453 static void __exit i7core_exit(void)
2454 {
2455         edac_dbg(2, "\n");
2456         pci_unregister_driver(&i7core_driver);
2457         mce_unregister_decode_chain(&i7_mce_dec);
2458 }
2459
2460 module_init(i7core_init);
2461 module_exit(i7core_exit);
2462
2463 MODULE_LICENSE("GPL");
2464 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
2465 MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
2466 MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
2467                    I7CORE_REVISION);
2468
2469 module_param(edac_op_state, int, 0444);
2470 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");