drivers/acpi/acpica/exresolv.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exresolv - AML Interpreter object resolution
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2018, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "amlcode.h"
  47 #include "acdispat.h"
  48 #include "acinterp.h"
  49 #include "acnamesp.h"
  50
  51 #define _COMPONENT          ACPI_EXECUTER
  52 ACPI_MODULE_NAME("exresolv")
  53
  54 /* Local prototypes */
  55 static acpi_status
  56 acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
  57                                 struct acpi_walk_state *walk_state);
  58
  59 /*******************************************************************************
  60  *
  61  * FUNCTION:    acpi_ex_resolve_to_value
  62  *
  63  * PARAMETERS:  **stack_ptr         - Points to entry on obj_stack, which can
  64  *                                    be either an (union acpi_operand_object *)
  65  *                                    or an acpi_handle.
  66  *              walk_state          - Current method state
  67  *
  68  * RETURN:      Status
  69  *
  70  * DESCRIPTION: Convert Reference objects to values
  71  *
  72  ******************************************************************************/
  73
  74 acpi_status
  75 acpi_ex_resolve_to_value(union acpi_operand_object **stack_ptr,
  76                          struct acpi_walk_state *walk_state)
  77 {
  78         acpi_status status;
  79
  80         ACPI_FUNCTION_TRACE_PTR(ex_resolve_to_value, stack_ptr);
  81
  82         if (!stack_ptr || !*stack_ptr) {
  83                 ACPI_ERROR((AE_INFO, "Internal - null pointer"));
  84                 return_ACPI_STATUS(AE_AML_NO_OPERAND);
  85         }
  86
  87         /*
  88          * The entity pointed to by the stack_ptr can be either
  89          * 1) A valid union acpi_operand_object, or
  90          * 2) A struct acpi_namespace_node (named_obj)
  91          */
  92         if (ACPI_GET_DESCRIPTOR_TYPE(*stack_ptr) == ACPI_DESC_TYPE_OPERAND) {
  93                 status = acpi_ex_resolve_object_to_value(stack_ptr, walk_state);
  94                 if (ACPI_FAILURE(status)) {
  95                         return_ACPI_STATUS(status);
  96                 }
  97
  98                 if (!*stack_ptr) {
  99                         ACPI_ERROR((AE_INFO, "Internal - null pointer"));
 100                         return_ACPI_STATUS(AE_AML_NO_OPERAND);
 101                 }
 102         }
 103
 104         /*
 105          * Object on the stack may have changed if acpi_ex_resolve_object_to_value()
 106          * was called (i.e., we can't use an _else_ here.)
 107          */
 108         if (ACPI_GET_DESCRIPTOR_TYPE(*stack_ptr) == ACPI_DESC_TYPE_NAMED) {
 109                 status =
 110                     acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR
 111                                                   (struct acpi_namespace_node,
 112                                                    stack_ptr), walk_state);
 113                 if (ACPI_FAILURE(status)) {
 114                         return_ACPI_STATUS(status);
 115                 }
 116         }
 117
 118         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Resolved object %p\n", *stack_ptr));
 119         return_ACPI_STATUS(AE_OK);
 120 }
 121
 122 /*******************************************************************************
 123  *
 124  * FUNCTION:    acpi_ex_resolve_object_to_value
 125  *
 126  * PARAMETERS:  stack_ptr       - Pointer to an internal object
 127  *              walk_state      - Current method state
 128  *
 129  * RETURN:      Status
 130  *
 131  * DESCRIPTION: Retrieve the value from an internal object. The Reference type
 132  *              uses the associated AML opcode to determine the value.
 133  *
 134  ******************************************************************************/
 135
 136 static acpi_status
 137 acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
 138                                 struct acpi_walk_state *walk_state)
 139 {
 140         acpi_status status = AE_OK;
 141         union acpi_operand_object *stack_desc;
 142         union acpi_operand_object *obj_desc = NULL;
 143         u8 ref_type;
 144
 145         ACPI_FUNCTION_TRACE(ex_resolve_object_to_value);
 146
 147         stack_desc = *stack_ptr;
 148
 149         /* This is an object of type union acpi_operand_object */
 150
 151         switch (stack_desc->common.type) {
 152         case ACPI_TYPE_LOCAL_REFERENCE:
 153
 154                 ref_type = stack_desc->reference.class;
 155
 156                 switch (ref_type) {
 157                 case ACPI_REFCLASS_LOCAL:
 158                 case ACPI_REFCLASS_ARG:
 159                         /*
 160                          * Get the local from the method's state info
 161                          * Note: this increments the local's object reference count
 162                          */
 163                         status = acpi_ds_method_data_get_value(ref_type,
 164                                                                stack_desc->
 165                                                                reference.value,
 166                                                                walk_state,
 167                                                                &obj_desc);
 168                         if (ACPI_FAILURE(status)) {
 169                                 return_ACPI_STATUS(status);
 170                         }
 171
 172                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 173                                           "[Arg/Local %X] ValueObj is %p\n",
 174                                           stack_desc->reference.value,
 175                                           obj_desc));
 176
 177                         /*
 178                          * Now we can delete the original Reference Object and
 179                          * replace it with the resolved value
 180                          */
 181                         acpi_ut_remove_reference(stack_desc);
 182                         *stack_ptr = obj_desc;
 183                         break;
 184
 185                 case ACPI_REFCLASS_INDEX:
 186
 187                         switch (stack_desc->reference.target_type) {
 188                         case ACPI_TYPE_BUFFER_FIELD:
 189
 190                                 /* Just return - do not dereference */
 191                                 break;
 192
 193                         case ACPI_TYPE_PACKAGE:
 194
 195                                 /* If method call or copy_object - do not dereference */
 196
 197                                 if ((walk_state->opcode ==
 198                                      AML_INT_METHODCALL_OP)
 199                                     || (walk_state->opcode ==
 200                                         AML_COPY_OBJECT_OP)) {
 201                                         break;
 202                                 }
 203
 204                                 /* Otherwise, dereference the package_index to a package element */
 205
 206                                 obj_desc = *stack_desc->reference.where;
 207                                 if (obj_desc) {
 208                                         /*
 209                                          * Valid object descriptor, copy pointer to return value
 210                                          * (i.e., dereference the package index)
 211                                          * Delete the ref object, increment the returned object
 212                                          */
 213                                         acpi_ut_add_reference(obj_desc);
 214                                         *stack_ptr = obj_desc;
 215                                 } else {
 216                                         /*
 217                                          * A NULL object descriptor means an uninitialized element of
 218                                          * the package, can't dereference it
 219                                          */
 220                                         ACPI_ERROR((AE_INFO,
 221                                                     "Attempt to dereference an Index to "
 222                                                     "NULL package element Idx=%p",
 223                                                     stack_desc));
 224                                         status = AE_AML_UNINITIALIZED_ELEMENT;
 225                                 }
 226                                 break;
 227
 228                         default:
 229
 230                                 /* Invalid reference object */
 231
 232                                 ACPI_ERROR((AE_INFO,
 233                                             "Unknown TargetType 0x%X in Index/Reference object %p",
 234                                             stack_desc->reference.target_type,
 235                                             stack_desc));
 236                                 status = AE_AML_INTERNAL;
 237                                 break;
 238                         }
 239                         break;
 240
 241                 case ACPI_REFCLASS_REFOF:
 242                 case ACPI_REFCLASS_DEBUG:
 243                 case ACPI_REFCLASS_TABLE:
 244
 245                         /* Just leave the object as-is, do not dereference */
 246
 247                         break;
 248
 249                 case ACPI_REFCLASS_NAME:        /* Reference to a named object */
 250
 251                         /* Dereference the name */
 252
 253                         if ((stack_desc->reference.node->type ==
 254                              ACPI_TYPE_DEVICE)
 255                             || (stack_desc->reference.node->type ==
 256                                 ACPI_TYPE_THERMAL)) {
 257
 258                                 /* These node types do not have 'real' subobjects */
 259
 260                                 *stack_ptr = (void *)stack_desc->reference.node;
 261                         } else {
 262                                 /* Get the object pointed to by the namespace node */
 263
 264                                 *stack_ptr =
 265                                     (stack_desc->reference.node)->object;
 266                                 acpi_ut_add_reference(*stack_ptr);
 267                         }
 268
 269                         acpi_ut_remove_reference(stack_desc);
 270                         break;
 271
 272                 default:
 273
 274                         ACPI_ERROR((AE_INFO,
 275                                     "Unknown Reference type 0x%X in %p",
 276                                     ref_type, stack_desc));
 277                         status = AE_AML_INTERNAL;
 278                         break;
 279                 }
 280                 break;
 281
 282         case ACPI_TYPE_BUFFER:
 283
 284                 status = acpi_ds_get_buffer_arguments(stack_desc);
 285                 break;
 286
 287         case ACPI_TYPE_PACKAGE:
 288
 289                 status = acpi_ds_get_package_arguments(stack_desc);
 290                 break;
 291
 292         case ACPI_TYPE_BUFFER_FIELD:
 293         case ACPI_TYPE_LOCAL_REGION_FIELD:
 294         case ACPI_TYPE_LOCAL_BANK_FIELD:
 295         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 296
 297                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 298                                   "FieldRead SourceDesc=%p Type=%X\n",
 299                                   stack_desc, stack_desc->common.type));
 300
 301                 status =
 302                     acpi_ex_read_data_from_field(walk_state, stack_desc,
 303                                                  &obj_desc);
 304
 305                 /* Remove a reference to the original operand, then override */
 306
 307                 acpi_ut_remove_reference(*stack_ptr);
 308                 *stack_ptr = (void *)obj_desc;
 309                 break;
 310
 311         default:
 312
 313                 break;
 314         }
 315
 316         return_ACPI_STATUS(status);
 317 }
 318
 319 /*******************************************************************************
 320  *
 321  * FUNCTION:    acpi_ex_resolve_multiple
 322  *
 323  * PARAMETERS:  walk_state          - Current state (contains AML opcode)
 324  *              operand             - Starting point for resolution
 325  *              return_type         - Where the object type is returned
 326  *              return_desc         - Where the resolved object is returned
 327  *
 328  * RETURN:      Status
 329  *
 330  * DESCRIPTION: Return the base object and type. Traverse a reference list if
 331  *              necessary to get to the base object.
 332  *
 333  ******************************************************************************/
 334
 335 acpi_status
 336 acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state,
 337                          union acpi_operand_object *operand,
 338                          acpi_object_type *return_type,
 339                          union acpi_operand_object **return_desc)
 340 {
 341         union acpi_operand_object *obj_desc = ACPI_CAST_PTR(void, operand);
 342         struct acpi_namespace_node *node =
 343             ACPI_CAST_PTR(struct acpi_namespace_node, operand);
 344         acpi_object_type type;
 345         acpi_status status;
 346
 347         ACPI_FUNCTION_TRACE(acpi_ex_resolve_multiple);
 348
 349         /* Operand can be either a namespace node or an operand descriptor */
 350
 351         switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc)) {
 352         case ACPI_DESC_TYPE_OPERAND:
 353
 354                 type = obj_desc->common.type;
 355                 break;
 356
 357         case ACPI_DESC_TYPE_NAMED:
 358
 359                 type = ((struct acpi_namespace_node *)obj_desc)->type;
 360                 obj_desc = acpi_ns_get_attached_object(node);
 361
 362                 /* If we had an Alias node, use the attached object for type info */
 363
 364                 if (type == ACPI_TYPE_LOCAL_ALIAS) {
 365                         type = ((struct acpi_namespace_node *)obj_desc)->type;
 366                         obj_desc = acpi_ns_get_attached_object((struct
 367                                                                 acpi_namespace_node
 368                                                                 *)obj_desc);
 369                 }
 370
 371                 switch (type) {
 372                 case ACPI_TYPE_DEVICE:
 373                 case ACPI_TYPE_THERMAL:
 374
 375                         /* These types have no attached subobject */
 376                         break;
 377
 378                 default:
 379
 380                         /* All other types require a subobject */
 381
 382                         if (!obj_desc) {
 383                                 ACPI_ERROR((AE_INFO,
 384                                             "[%4.4s] Node is unresolved or uninitialized",
 385                                             acpi_ut_get_node_name(node)));
 386                                 return_ACPI_STATUS(AE_AML_UNINITIALIZED_NODE);
 387                         }
 388                         break;
 389                 }
 390                 break;
 391
 392         default:
 393                 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 394         }
 395
 396         /* If type is anything other than a reference, we are done */
 397
 398         if (type != ACPI_TYPE_LOCAL_REFERENCE) {
 399                 goto exit;
 400         }
 401
 402         /*
 403          * For reference objects created via the ref_of, Index, or Load/load_table
 404          * operators, we need to get to the base object (as per the ACPI
 405          * specification of the object_type and size_of operators). This means
 406          * traversing the list of possibly many nested references.
 407          */
 408         while (obj_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
 409                 switch (obj_desc->reference.class) {
 410                 case ACPI_REFCLASS_REFOF:
 411                 case ACPI_REFCLASS_NAME:
 412
 413                         /* Dereference the reference pointer */
 414
 415                         if (obj_desc->reference.class == ACPI_REFCLASS_REFOF) {
 416                                 node = obj_desc->reference.object;
 417                         } else {        /* AML_INT_NAMEPATH_OP */
 418
 419                                 node = obj_desc->reference.node;
 420                         }
 421
 422                         /* All "References" point to a NS node */
 423
 424                         if (ACPI_GET_DESCRIPTOR_TYPE(node) !=
 425                             ACPI_DESC_TYPE_NAMED) {
 426                                 ACPI_ERROR((AE_INFO,
 427                                             "Not a namespace node %p [%s]",
 428                                             node,
 429                                             acpi_ut_get_descriptor_name(node)));
 430                                 return_ACPI_STATUS(AE_AML_INTERNAL);
 431                         }
 432
 433                         /* Get the attached object */
 434
 435                         obj_desc = acpi_ns_get_attached_object(node);
 436                         if (!obj_desc) {
 437
 438                                 /* No object, use the NS node type */
 439
 440                                 type = acpi_ns_get_type(node);
 441                                 goto exit;
 442                         }
 443
 444                         /* Check for circular references */
 445
 446                         if (obj_desc == operand) {
 447                                 return_ACPI_STATUS(AE_AML_CIRCULAR_REFERENCE);
 448                         }
 449                         break;
 450
 451                 case ACPI_REFCLASS_INDEX:
 452
 453                         /* Get the type of this reference (index into another object) */
 454
 455                         type = obj_desc->reference.target_type;
 456                         if (type != ACPI_TYPE_PACKAGE) {
 457                                 goto exit;
 458                         }
 459
 460                         /*
 461                          * The main object is a package, we want to get the type
 462                          * of the individual package element that is referenced by
 463                          * the index.
 464                          *
 465                          * This could of course in turn be another reference object.
 466                          */
 467                         obj_desc = *(obj_desc->reference.where);
 468                         if (!obj_desc) {
 469
 470                                 /* NULL package elements are allowed */
 471
 472                                 type = 0;       /* Uninitialized */
 473                                 goto exit;
 474                         }
 475                         break;
 476
 477                 case ACPI_REFCLASS_TABLE:
 478
 479                         type = ACPI_TYPE_DDB_HANDLE;
 480                         goto exit;
 481
 482                 case ACPI_REFCLASS_LOCAL:
 483                 case ACPI_REFCLASS_ARG:
 484
 485                         if (return_desc) {
 486                                 status =
 487                                     acpi_ds_method_data_get_value(obj_desc->
 488                                                                   reference.
 489                                                                   class,
 490                                                                   obj_desc->
 491                                                                   reference.
 492                                                                   value,
 493                                                                   walk_state,
 494                                                                   &obj_desc);
 495                                 if (ACPI_FAILURE(status)) {
 496                                         return_ACPI_STATUS(status);
 497                                 }
 498                                 acpi_ut_remove_reference(obj_desc);
 499                         } else {
 500                                 status =
 501                                     acpi_ds_method_data_get_node(obj_desc->
 502                                                                  reference.
 503                                                                  class,
 504                                                                  obj_desc->
 505                                                                  reference.
 506                                                                  value,
 507                                                                  walk_state,
 508                                                                  &node);
 509                                 if (ACPI_FAILURE(status)) {
 510                                         return_ACPI_STATUS(status);
 511                                 }
 512
 513                                 obj_desc = acpi_ns_get_attached_object(node);
 514                                 if (!obj_desc) {
 515                                         type = ACPI_TYPE_ANY;
 516                                         goto exit;
 517                                 }
 518                         }
 519                         break;
 520
 521                 case ACPI_REFCLASS_DEBUG:
 522
 523                         /* The Debug Object is of type "DebugObject" */
 524
 525                         type = ACPI_TYPE_DEBUG_OBJECT;
 526                         goto exit;
 527
 528                 default:
 529
 530                         ACPI_ERROR((AE_INFO,
 531                                     "Unknown Reference Class 0x%2.2X",
 532                                     obj_desc->reference.class));
 533                         return_ACPI_STATUS(AE_AML_INTERNAL);
 534                 }
 535         }
 536
 537         /*
 538          * Now we are guaranteed to have an object that has not been created
 539          * via the ref_of or Index operators.
 540          */
 541         type = obj_desc->common.type;
 542
 543 exit:
 544         /* Convert internal types to external types */
 545
 546         switch (type) {
 547         case ACPI_TYPE_LOCAL_REGION_FIELD:
 548         case ACPI_TYPE_LOCAL_BANK_FIELD:
 549         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 550
 551                 type = ACPI_TYPE_FIELD_UNIT;
 552                 break;
 553
 554         case ACPI_TYPE_LOCAL_SCOPE:
 555
 556                 /* Per ACPI Specification, Scope is untyped */
 557
 558                 type = ACPI_TYPE_ANY;
 559                 break;
 560
 561         default:
 562
 563                 /* No change to Type required */
 564
 565                 break;
 566         }
 567
 568         *return_type = type;
 569         if (return_desc) {
 570                 *return_desc = obj_desc;
 571         }
 572         return_ACPI_STATUS(AE_OK);
 573 }