x86/xen: remove 32-bit Xen PV guest support
[sfrench/cifs-2.6.git] / arch / x86 / xen / setup.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Machine specific setup for xen
4  *
5  * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
6  */
7
8 #include <linux/init.h>
9 #include <linux/sched.h>
10 #include <linux/mm.h>
11 #include <linux/pm.h>
12 #include <linux/memblock.h>
13 #include <linux/cpuidle.h>
14 #include <linux/cpufreq.h>
15 #include <linux/memory_hotplug.h>
16
17 #include <asm/elf.h>
18 #include <asm/vdso.h>
19 #include <asm/e820/api.h>
20 #include <asm/setup.h>
21 #include <asm/acpi.h>
22 #include <asm/numa.h>
23 #include <asm/idtentry.h>
24 #include <asm/xen/hypervisor.h>
25 #include <asm/xen/hypercall.h>
26
27 #include <xen/xen.h>
28 #include <xen/page.h>
29 #include <xen/interface/callback.h>
30 #include <xen/interface/memory.h>
31 #include <xen/interface/physdev.h>
32 #include <xen/features.h>
33 #include <xen/hvc-console.h>
34 #include "xen-ops.h"
35 #include "mmu.h"
36
37 #define GB(x) ((uint64_t)(x) * 1024 * 1024 * 1024)
38
39 /* Amount of extra memory space we add to the e820 ranges */
40 struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata;
41
42 /* Number of pages released from the initial allocation. */
43 unsigned long xen_released_pages;
44
45 /* E820 map used during setting up memory. */
46 static struct e820_table xen_e820_table __initdata;
47
48 /*
49  * Buffer used to remap identity mapped pages. We only need the virtual space.
50  * The physical page behind this address is remapped as needed to different
51  * buffer pages.
52  */
53 #define REMAP_SIZE      (P2M_PER_PAGE - 3)
54 static struct {
55         unsigned long   next_area_mfn;
56         unsigned long   target_pfn;
57         unsigned long   size;
58         unsigned long   mfns[REMAP_SIZE];
59 } xen_remap_buf __initdata __aligned(PAGE_SIZE);
60 static unsigned long xen_remap_mfn __initdata = INVALID_P2M_ENTRY;
61
62 /* 
63  * The maximum amount of extra memory compared to the base size.  The
64  * main scaling factor is the size of struct page.  At extreme ratios
65  * of base:extra, all the base memory can be filled with page
66  * structures for the extra memory, leaving no space for anything
67  * else.
68  * 
69  * 10x seems like a reasonable balance between scaling flexibility and
70  * leaving a practically usable system.
71  */
72 #define EXTRA_MEM_RATIO         (10)
73
74 static bool xen_512gb_limit __initdata = IS_ENABLED(CONFIG_XEN_512GB);
75
76 static void __init xen_parse_512gb(void)
77 {
78         bool val = false;
79         char *arg;
80
81         arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit");
82         if (!arg)
83                 return;
84
85         arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit=");
86         if (!arg)
87                 val = true;
88         else if (strtobool(arg + strlen("xen_512gb_limit="), &val))
89                 return;
90
91         xen_512gb_limit = val;
92 }
93
94 static void __init xen_add_extra_mem(unsigned long start_pfn,
95                                      unsigned long n_pfns)
96 {
97         int i;
98
99         /*
100          * No need to check for zero size, should happen rarely and will only
101          * write a new entry regarded to be unused due to zero size.
102          */
103         for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
104                 /* Add new region. */
105                 if (xen_extra_mem[i].n_pfns == 0) {
106                         xen_extra_mem[i].start_pfn = start_pfn;
107                         xen_extra_mem[i].n_pfns = n_pfns;
108                         break;
109                 }
110                 /* Append to existing region. */
111                 if (xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns ==
112                     start_pfn) {
113                         xen_extra_mem[i].n_pfns += n_pfns;
114                         break;
115                 }
116         }
117         if (i == XEN_EXTRA_MEM_MAX_REGIONS)
118                 printk(KERN_WARNING "Warning: not enough extra memory regions\n");
119
120         memblock_reserve(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns));
121 }
122
123 static void __init xen_del_extra_mem(unsigned long start_pfn,
124                                      unsigned long n_pfns)
125 {
126         int i;
127         unsigned long start_r, size_r;
128
129         for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
130                 start_r = xen_extra_mem[i].start_pfn;
131                 size_r = xen_extra_mem[i].n_pfns;
132
133                 /* Start of region. */
134                 if (start_r == start_pfn) {
135                         BUG_ON(n_pfns > size_r);
136                         xen_extra_mem[i].start_pfn += n_pfns;
137                         xen_extra_mem[i].n_pfns -= n_pfns;
138                         break;
139                 }
140                 /* End of region. */
141                 if (start_r + size_r == start_pfn + n_pfns) {
142                         BUG_ON(n_pfns > size_r);
143                         xen_extra_mem[i].n_pfns -= n_pfns;
144                         break;
145                 }
146                 /* Mid of region. */
147                 if (start_pfn > start_r && start_pfn < start_r + size_r) {
148                         BUG_ON(start_pfn + n_pfns > start_r + size_r);
149                         xen_extra_mem[i].n_pfns = start_pfn - start_r;
150                         /* Calling memblock_reserve() again is okay. */
151                         xen_add_extra_mem(start_pfn + n_pfns, start_r + size_r -
152                                           (start_pfn + n_pfns));
153                         break;
154                 }
155         }
156         memblock_free(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns));
157 }
158
159 /*
160  * Called during boot before the p2m list can take entries beyond the
161  * hypervisor supplied p2m list. Entries in extra mem are to be regarded as
162  * invalid.
163  */
164 unsigned long __ref xen_chk_extra_mem(unsigned long pfn)
165 {
166         int i;
167
168         for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
169                 if (pfn >= xen_extra_mem[i].start_pfn &&
170                     pfn < xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns)
171                         return INVALID_P2M_ENTRY;
172         }
173
174         return IDENTITY_FRAME(pfn);
175 }
176
177 /*
178  * Mark all pfns of extra mem as invalid in p2m list.
179  */
180 void __init xen_inv_extra_mem(void)
181 {
182         unsigned long pfn, pfn_s, pfn_e;
183         int i;
184
185         for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
186                 if (!xen_extra_mem[i].n_pfns)
187                         continue;
188                 pfn_s = xen_extra_mem[i].start_pfn;
189                 pfn_e = pfn_s + xen_extra_mem[i].n_pfns;
190                 for (pfn = pfn_s; pfn < pfn_e; pfn++)
191                         set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
192         }
193 }
194
195 /*
196  * Finds the next RAM pfn available in the E820 map after min_pfn.
197  * This function updates min_pfn with the pfn found and returns
198  * the size of that range or zero if not found.
199  */
200 static unsigned long __init xen_find_pfn_range(unsigned long *min_pfn)
201 {
202         const struct e820_entry *entry = xen_e820_table.entries;
203         unsigned int i;
204         unsigned long done = 0;
205
206         for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
207                 unsigned long s_pfn;
208                 unsigned long e_pfn;
209
210                 if (entry->type != E820_TYPE_RAM)
211                         continue;
212
213                 e_pfn = PFN_DOWN(entry->addr + entry->size);
214
215                 /* We only care about E820 after this */
216                 if (e_pfn <= *min_pfn)
217                         continue;
218
219                 s_pfn = PFN_UP(entry->addr);
220
221                 /* If min_pfn falls within the E820 entry, we want to start
222                  * at the min_pfn PFN.
223                  */
224                 if (s_pfn <= *min_pfn) {
225                         done = e_pfn - *min_pfn;
226                 } else {
227                         done = e_pfn - s_pfn;
228                         *min_pfn = s_pfn;
229                 }
230                 break;
231         }
232
233         return done;
234 }
235
236 static int __init xen_free_mfn(unsigned long mfn)
237 {
238         struct xen_memory_reservation reservation = {
239                 .address_bits = 0,
240                 .extent_order = 0,
241                 .domid        = DOMID_SELF
242         };
243
244         set_xen_guest_handle(reservation.extent_start, &mfn);
245         reservation.nr_extents = 1;
246
247         return HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation);
248 }
249
250 /*
251  * This releases a chunk of memory and then does the identity map. It's used
252  * as a fallback if the remapping fails.
253  */
254 static void __init xen_set_identity_and_release_chunk(unsigned long start_pfn,
255                         unsigned long end_pfn, unsigned long nr_pages)
256 {
257         unsigned long pfn, end;
258         int ret;
259
260         WARN_ON(start_pfn > end_pfn);
261
262         /* Release pages first. */
263         end = min(end_pfn, nr_pages);
264         for (pfn = start_pfn; pfn < end; pfn++) {
265                 unsigned long mfn = pfn_to_mfn(pfn);
266
267                 /* Make sure pfn exists to start with */
268                 if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
269                         continue;
270
271                 ret = xen_free_mfn(mfn);
272                 WARN(ret != 1, "Failed to release pfn %lx err=%d\n", pfn, ret);
273
274                 if (ret == 1) {
275                         xen_released_pages++;
276                         if (!__set_phys_to_machine(pfn, INVALID_P2M_ENTRY))
277                                 break;
278                 } else
279                         break;
280         }
281
282         set_phys_range_identity(start_pfn, end_pfn);
283 }
284
285 /*
286  * Helper function to update the p2m and m2p tables and kernel mapping.
287  */
288 static void __init xen_update_mem_tables(unsigned long pfn, unsigned long mfn)
289 {
290         struct mmu_update update = {
291                 .ptr = ((uint64_t)mfn << PAGE_SHIFT) | MMU_MACHPHYS_UPDATE,
292                 .val = pfn
293         };
294
295         /* Update p2m */
296         if (!set_phys_to_machine(pfn, mfn)) {
297                 WARN(1, "Failed to set p2m mapping for pfn=%ld mfn=%ld\n",
298                      pfn, mfn);
299                 BUG();
300         }
301
302         /* Update m2p */
303         if (HYPERVISOR_mmu_update(&update, 1, NULL, DOMID_SELF) < 0) {
304                 WARN(1, "Failed to set m2p mapping for mfn=%ld pfn=%ld\n",
305                      mfn, pfn);
306                 BUG();
307         }
308
309         /* Update kernel mapping, but not for highmem. */
310         if (pfn >= PFN_UP(__pa(high_memory - 1)))
311                 return;
312
313         if (HYPERVISOR_update_va_mapping((unsigned long)__va(pfn << PAGE_SHIFT),
314                                          mfn_pte(mfn, PAGE_KERNEL), 0)) {
315                 WARN(1, "Failed to update kernel mapping for mfn=%ld pfn=%ld\n",
316                       mfn, pfn);
317                 BUG();
318         }
319 }
320
321 /*
322  * This function updates the p2m and m2p tables with an identity map from
323  * start_pfn to start_pfn+size and prepares remapping the underlying RAM of the
324  * original allocation at remap_pfn. The information needed for remapping is
325  * saved in the memory itself to avoid the need for allocating buffers. The
326  * complete remap information is contained in a list of MFNs each containing
327  * up to REMAP_SIZE MFNs and the start target PFN for doing the remap.
328  * This enables us to preserve the original mfn sequence while doing the
329  * remapping at a time when the memory management is capable of allocating
330  * virtual and physical memory in arbitrary amounts, see 'xen_remap_memory' and
331  * its callers.
332  */
333 static void __init xen_do_set_identity_and_remap_chunk(
334         unsigned long start_pfn, unsigned long size, unsigned long remap_pfn)
335 {
336         unsigned long buf = (unsigned long)&xen_remap_buf;
337         unsigned long mfn_save, mfn;
338         unsigned long ident_pfn_iter, remap_pfn_iter;
339         unsigned long ident_end_pfn = start_pfn + size;
340         unsigned long left = size;
341         unsigned int i, chunk;
342
343         WARN_ON(size == 0);
344
345         mfn_save = virt_to_mfn(buf);
346
347         for (ident_pfn_iter = start_pfn, remap_pfn_iter = remap_pfn;
348              ident_pfn_iter < ident_end_pfn;
349              ident_pfn_iter += REMAP_SIZE, remap_pfn_iter += REMAP_SIZE) {
350                 chunk = (left < REMAP_SIZE) ? left : REMAP_SIZE;
351
352                 /* Map first pfn to xen_remap_buf */
353                 mfn = pfn_to_mfn(ident_pfn_iter);
354                 set_pte_mfn(buf, mfn, PAGE_KERNEL);
355
356                 /* Save mapping information in page */
357                 xen_remap_buf.next_area_mfn = xen_remap_mfn;
358                 xen_remap_buf.target_pfn = remap_pfn_iter;
359                 xen_remap_buf.size = chunk;
360                 for (i = 0; i < chunk; i++)
361                         xen_remap_buf.mfns[i] = pfn_to_mfn(ident_pfn_iter + i);
362
363                 /* Put remap buf into list. */
364                 xen_remap_mfn = mfn;
365
366                 /* Set identity map */
367                 set_phys_range_identity(ident_pfn_iter, ident_pfn_iter + chunk);
368
369                 left -= chunk;
370         }
371
372         /* Restore old xen_remap_buf mapping */
373         set_pte_mfn(buf, mfn_save, PAGE_KERNEL);
374 }
375
376 /*
377  * This function takes a contiguous pfn range that needs to be identity mapped
378  * and:
379  *
380  *  1) Finds a new range of pfns to use to remap based on E820 and remap_pfn.
381  *  2) Calls the do_ function to actually do the mapping/remapping work.
382  *
383  * The goal is to not allocate additional memory but to remap the existing
384  * pages. In the case of an error the underlying memory is simply released back
385  * to Xen and not remapped.
386  */
387 static unsigned long __init xen_set_identity_and_remap_chunk(
388         unsigned long start_pfn, unsigned long end_pfn, unsigned long nr_pages,
389         unsigned long remap_pfn)
390 {
391         unsigned long pfn;
392         unsigned long i = 0;
393         unsigned long n = end_pfn - start_pfn;
394
395         if (remap_pfn == 0)
396                 remap_pfn = nr_pages;
397
398         while (i < n) {
399                 unsigned long cur_pfn = start_pfn + i;
400                 unsigned long left = n - i;
401                 unsigned long size = left;
402                 unsigned long remap_range_size;
403
404                 /* Do not remap pages beyond the current allocation */
405                 if (cur_pfn >= nr_pages) {
406                         /* Identity map remaining pages */
407                         set_phys_range_identity(cur_pfn, cur_pfn + size);
408                         break;
409                 }
410                 if (cur_pfn + size > nr_pages)
411                         size = nr_pages - cur_pfn;
412
413                 remap_range_size = xen_find_pfn_range(&remap_pfn);
414                 if (!remap_range_size) {
415                         pr_warn("Unable to find available pfn range, not remapping identity pages\n");
416                         xen_set_identity_and_release_chunk(cur_pfn,
417                                                 cur_pfn + left, nr_pages);
418                         break;
419                 }
420                 /* Adjust size to fit in current e820 RAM region */
421                 if (size > remap_range_size)
422                         size = remap_range_size;
423
424                 xen_do_set_identity_and_remap_chunk(cur_pfn, size, remap_pfn);
425
426                 /* Update variables to reflect new mappings. */
427                 i += size;
428                 remap_pfn += size;
429         }
430
431         /*
432          * If the PFNs are currently mapped, the VA mapping also needs
433          * to be updated to be 1:1.
434          */
435         for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++)
436                 (void)HYPERVISOR_update_va_mapping(
437                         (unsigned long)__va(pfn << PAGE_SHIFT),
438                         mfn_pte(pfn, PAGE_KERNEL_IO), 0);
439
440         return remap_pfn;
441 }
442
443 static unsigned long __init xen_count_remap_pages(
444         unsigned long start_pfn, unsigned long end_pfn, unsigned long nr_pages,
445         unsigned long remap_pages)
446 {
447         if (start_pfn >= nr_pages)
448                 return remap_pages;
449
450         return remap_pages + min(end_pfn, nr_pages) - start_pfn;
451 }
452
453 static unsigned long __init xen_foreach_remap_area(unsigned long nr_pages,
454         unsigned long (*func)(unsigned long start_pfn, unsigned long end_pfn,
455                               unsigned long nr_pages, unsigned long last_val))
456 {
457         phys_addr_t start = 0;
458         unsigned long ret_val = 0;
459         const struct e820_entry *entry = xen_e820_table.entries;
460         int i;
461
462         /*
463          * Combine non-RAM regions and gaps until a RAM region (or the
464          * end of the map) is reached, then call the provided function
465          * to perform its duty on the non-RAM region.
466          *
467          * The combined non-RAM regions are rounded to a whole number
468          * of pages so any partial pages are accessible via the 1:1
469          * mapping.  This is needed for some BIOSes that put (for
470          * example) the DMI tables in a reserved region that begins on
471          * a non-page boundary.
472          */
473         for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
474                 phys_addr_t end = entry->addr + entry->size;
475                 if (entry->type == E820_TYPE_RAM || i == xen_e820_table.nr_entries - 1) {
476                         unsigned long start_pfn = PFN_DOWN(start);
477                         unsigned long end_pfn = PFN_UP(end);
478
479                         if (entry->type == E820_TYPE_RAM)
480                                 end_pfn = PFN_UP(entry->addr);
481
482                         if (start_pfn < end_pfn)
483                                 ret_val = func(start_pfn, end_pfn, nr_pages,
484                                                ret_val);
485                         start = end;
486                 }
487         }
488
489         return ret_val;
490 }
491
492 /*
493  * Remap the memory prepared in xen_do_set_identity_and_remap_chunk().
494  * The remap information (which mfn remap to which pfn) is contained in the
495  * to be remapped memory itself in a linked list anchored at xen_remap_mfn.
496  * This scheme allows to remap the different chunks in arbitrary order while
497  * the resulting mapping will be independent from the order.
498  */
499 void __init xen_remap_memory(void)
500 {
501         unsigned long buf = (unsigned long)&xen_remap_buf;
502         unsigned long mfn_save, pfn;
503         unsigned long remapped = 0;
504         unsigned int i;
505         unsigned long pfn_s = ~0UL;
506         unsigned long len = 0;
507
508         mfn_save = virt_to_mfn(buf);
509
510         while (xen_remap_mfn != INVALID_P2M_ENTRY) {
511                 /* Map the remap information */
512                 set_pte_mfn(buf, xen_remap_mfn, PAGE_KERNEL);
513
514                 BUG_ON(xen_remap_mfn != xen_remap_buf.mfns[0]);
515
516                 pfn = xen_remap_buf.target_pfn;
517                 for (i = 0; i < xen_remap_buf.size; i++) {
518                         xen_update_mem_tables(pfn, xen_remap_buf.mfns[i]);
519                         remapped++;
520                         pfn++;
521                 }
522                 if (pfn_s == ~0UL || pfn == pfn_s) {
523                         pfn_s = xen_remap_buf.target_pfn;
524                         len += xen_remap_buf.size;
525                 } else if (pfn_s + len == xen_remap_buf.target_pfn) {
526                         len += xen_remap_buf.size;
527                 } else {
528                         xen_del_extra_mem(pfn_s, len);
529                         pfn_s = xen_remap_buf.target_pfn;
530                         len = xen_remap_buf.size;
531                 }
532                 xen_remap_mfn = xen_remap_buf.next_area_mfn;
533         }
534
535         if (pfn_s != ~0UL && len)
536                 xen_del_extra_mem(pfn_s, len);
537
538         set_pte_mfn(buf, mfn_save, PAGE_KERNEL);
539
540         pr_info("Remapped %ld page(s)\n", remapped);
541 }
542
543 static unsigned long __init xen_get_pages_limit(void)
544 {
545         unsigned long limit;
546
547         limit = MAXMEM / PAGE_SIZE;
548         if (!xen_initial_domain() && xen_512gb_limit)
549                 limit = GB(512) / PAGE_SIZE;
550
551         return limit;
552 }
553
554 static unsigned long __init xen_get_max_pages(void)
555 {
556         unsigned long max_pages, limit;
557         domid_t domid = DOMID_SELF;
558         long ret;
559
560         limit = xen_get_pages_limit();
561         max_pages = limit;
562
563         /*
564          * For the initial domain we use the maximum reservation as
565          * the maximum page.
566          *
567          * For guest domains the current maximum reservation reflects
568          * the current maximum rather than the static maximum. In this
569          * case the e820 map provided to us will cover the static
570          * maximum region.
571          */
572         if (xen_initial_domain()) {
573                 ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
574                 if (ret > 0)
575                         max_pages = ret;
576         }
577
578         return min(max_pages, limit);
579 }
580
581 static void __init xen_align_and_add_e820_region(phys_addr_t start,
582                                                  phys_addr_t size, int type)
583 {
584         phys_addr_t end = start + size;
585
586         /* Align RAM regions to page boundaries. */
587         if (type == E820_TYPE_RAM) {
588                 start = PAGE_ALIGN(start);
589                 end &= ~((phys_addr_t)PAGE_SIZE - 1);
590 #ifdef CONFIG_MEMORY_HOTPLUG
591                 /*
592                  * Don't allow adding memory not in E820 map while booting the
593                  * system. Once the balloon driver is up it will remove that
594                  * restriction again.
595                  */
596                 max_mem_size = end;
597 #endif
598         }
599
600         e820__range_add(start, end - start, type);
601 }
602
603 static void __init xen_ignore_unusable(void)
604 {
605         struct e820_entry *entry = xen_e820_table.entries;
606         unsigned int i;
607
608         for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
609                 if (entry->type == E820_TYPE_UNUSABLE)
610                         entry->type = E820_TYPE_RAM;
611         }
612 }
613
614 bool __init xen_is_e820_reserved(phys_addr_t start, phys_addr_t size)
615 {
616         struct e820_entry *entry;
617         unsigned mapcnt;
618         phys_addr_t end;
619
620         if (!size)
621                 return false;
622
623         end = start + size;
624         entry = xen_e820_table.entries;
625
626         for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++) {
627                 if (entry->type == E820_TYPE_RAM && entry->addr <= start &&
628                     (entry->addr + entry->size) >= end)
629                         return false;
630
631                 entry++;
632         }
633
634         return true;
635 }
636
637 /*
638  * Find a free area in physical memory not yet reserved and compliant with
639  * E820 map.
640  * Used to relocate pre-allocated areas like initrd or p2m list which are in
641  * conflict with the to be used E820 map.
642  * In case no area is found, return 0. Otherwise return the physical address
643  * of the area which is already reserved for convenience.
644  */
645 phys_addr_t __init xen_find_free_area(phys_addr_t size)
646 {
647         unsigned mapcnt;
648         phys_addr_t addr, start;
649         struct e820_entry *entry = xen_e820_table.entries;
650
651         for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++, entry++) {
652                 if (entry->type != E820_TYPE_RAM || entry->size < size)
653                         continue;
654                 start = entry->addr;
655                 for (addr = start; addr < start + size; addr += PAGE_SIZE) {
656                         if (!memblock_is_reserved(addr))
657                                 continue;
658                         start = addr + PAGE_SIZE;
659                         if (start + size > entry->addr + entry->size)
660                                 break;
661                 }
662                 if (addr >= start + size) {
663                         memblock_reserve(start, size);
664                         return start;
665                 }
666         }
667
668         return 0;
669 }
670
671 /*
672  * Like memcpy, but with physical addresses for dest and src.
673  */
674 static void __init xen_phys_memcpy(phys_addr_t dest, phys_addr_t src,
675                                    phys_addr_t n)
676 {
677         phys_addr_t dest_off, src_off, dest_len, src_len, len;
678         void *from, *to;
679
680         while (n) {
681                 dest_off = dest & ~PAGE_MASK;
682                 src_off = src & ~PAGE_MASK;
683                 dest_len = n;
684                 if (dest_len > (NR_FIX_BTMAPS << PAGE_SHIFT) - dest_off)
685                         dest_len = (NR_FIX_BTMAPS << PAGE_SHIFT) - dest_off;
686                 src_len = n;
687                 if (src_len > (NR_FIX_BTMAPS << PAGE_SHIFT) - src_off)
688                         src_len = (NR_FIX_BTMAPS << PAGE_SHIFT) - src_off;
689                 len = min(dest_len, src_len);
690                 to = early_memremap(dest - dest_off, dest_len + dest_off);
691                 from = early_memremap(src - src_off, src_len + src_off);
692                 memcpy(to, from, len);
693                 early_memunmap(to, dest_len + dest_off);
694                 early_memunmap(from, src_len + src_off);
695                 n -= len;
696                 dest += len;
697                 src += len;
698         }
699 }
700
701 /*
702  * Reserve Xen mfn_list.
703  */
704 static void __init xen_reserve_xen_mfnlist(void)
705 {
706         phys_addr_t start, size;
707
708         if (xen_start_info->mfn_list >= __START_KERNEL_map) {
709                 start = __pa(xen_start_info->mfn_list);
710                 size = PFN_ALIGN(xen_start_info->nr_pages *
711                                  sizeof(unsigned long));
712         } else {
713                 start = PFN_PHYS(xen_start_info->first_p2m_pfn);
714                 size = PFN_PHYS(xen_start_info->nr_p2m_frames);
715         }
716
717         memblock_reserve(start, size);
718         if (!xen_is_e820_reserved(start, size))
719                 return;
720
721         xen_relocate_p2m();
722         memblock_free(start, size);
723 }
724
725 /**
726  * machine_specific_memory_setup - Hook for machine specific memory setup.
727  **/
728 char * __init xen_memory_setup(void)
729 {
730         unsigned long max_pfn, pfn_s, n_pfns;
731         phys_addr_t mem_end, addr, size, chunk_size;
732         u32 type;
733         int rc;
734         struct xen_memory_map memmap;
735         unsigned long max_pages;
736         unsigned long extra_pages = 0;
737         int i;
738         int op;
739
740         xen_parse_512gb();
741         max_pfn = xen_get_pages_limit();
742         max_pfn = min(max_pfn, xen_start_info->nr_pages);
743         mem_end = PFN_PHYS(max_pfn);
744
745         memmap.nr_entries = ARRAY_SIZE(xen_e820_table.entries);
746         set_xen_guest_handle(memmap.buffer, xen_e820_table.entries);
747
748 #if defined(CONFIG_MEMORY_HOTPLUG) && defined(CONFIG_XEN_BALLOON)
749         xen_saved_max_mem_size = max_mem_size;
750 #endif
751
752         op = xen_initial_domain() ?
753                 XENMEM_machine_memory_map :
754                 XENMEM_memory_map;
755         rc = HYPERVISOR_memory_op(op, &memmap);
756         if (rc == -ENOSYS) {
757                 BUG_ON(xen_initial_domain());
758                 memmap.nr_entries = 1;
759                 xen_e820_table.entries[0].addr = 0ULL;
760                 xen_e820_table.entries[0].size = mem_end;
761                 /* 8MB slack (to balance backend allocations). */
762                 xen_e820_table.entries[0].size += 8ULL << 20;
763                 xen_e820_table.entries[0].type = E820_TYPE_RAM;
764                 rc = 0;
765         }
766         BUG_ON(rc);
767         BUG_ON(memmap.nr_entries == 0);
768         xen_e820_table.nr_entries = memmap.nr_entries;
769
770         /*
771          * Xen won't allow a 1:1 mapping to be created to UNUSABLE
772          * regions, so if we're using the machine memory map leave the
773          * region as RAM as it is in the pseudo-physical map.
774          *
775          * UNUSABLE regions in domUs are not handled and will need
776          * a patch in the future.
777          */
778         if (xen_initial_domain())
779                 xen_ignore_unusable();
780
781         /* Make sure the Xen-supplied memory map is well-ordered. */
782         e820__update_table(&xen_e820_table);
783
784         max_pages = xen_get_max_pages();
785
786         /* How many extra pages do we need due to remapping? */
787         max_pages += xen_foreach_remap_area(max_pfn, xen_count_remap_pages);
788
789         if (max_pages > max_pfn)
790                 extra_pages += max_pages - max_pfn;
791
792         /*
793          * Clamp the amount of extra memory to a EXTRA_MEM_RATIO
794          * factor the base size.  On non-highmem systems, the base
795          * size is the full initial memory allocation; on highmem it
796          * is limited to the max size of lowmem, so that it doesn't
797          * get completely filled.
798          *
799          * Make sure we have no memory above max_pages, as this area
800          * isn't handled by the p2m management.
801          *
802          * In principle there could be a problem in lowmem systems if
803          * the initial memory is also very large with respect to
804          * lowmem, but we won't try to deal with that here.
805          */
806         extra_pages = min3(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
807                            extra_pages, max_pages - max_pfn);
808         i = 0;
809         addr = xen_e820_table.entries[0].addr;
810         size = xen_e820_table.entries[0].size;
811         while (i < xen_e820_table.nr_entries) {
812                 bool discard = false;
813
814                 chunk_size = size;
815                 type = xen_e820_table.entries[i].type;
816
817                 if (type == E820_TYPE_RAM) {
818                         if (addr < mem_end) {
819                                 chunk_size = min(size, mem_end - addr);
820                         } else if (extra_pages) {
821                                 chunk_size = min(size, PFN_PHYS(extra_pages));
822                                 pfn_s = PFN_UP(addr);
823                                 n_pfns = PFN_DOWN(addr + chunk_size) - pfn_s;
824                                 extra_pages -= n_pfns;
825                                 xen_add_extra_mem(pfn_s, n_pfns);
826                                 xen_max_p2m_pfn = pfn_s + n_pfns;
827                         } else
828                                 discard = true;
829                 }
830
831                 if (!discard)
832                         xen_align_and_add_e820_region(addr, chunk_size, type);
833
834                 addr += chunk_size;
835                 size -= chunk_size;
836                 if (size == 0) {
837                         i++;
838                         if (i < xen_e820_table.nr_entries) {
839                                 addr = xen_e820_table.entries[i].addr;
840                                 size = xen_e820_table.entries[i].size;
841                         }
842                 }
843         }
844
845         /*
846          * Set the rest as identity mapped, in case PCI BARs are
847          * located here.
848          */
849         set_phys_range_identity(addr / PAGE_SIZE, ~0ul);
850
851         /*
852          * In domU, the ISA region is normal, usable memory, but we
853          * reserve ISA memory anyway because too many things poke
854          * about in there.
855          */
856         e820__range_add(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS, E820_TYPE_RESERVED);
857
858         e820__update_table(e820_table);
859
860         /*
861          * Check whether the kernel itself conflicts with the target E820 map.
862          * Failing now is better than running into weird problems later due
863          * to relocating (and even reusing) pages with kernel text or data.
864          */
865         if (xen_is_e820_reserved(__pa_symbol(_text),
866                         __pa_symbol(__bss_stop) - __pa_symbol(_text))) {
867                 xen_raw_console_write("Xen hypervisor allocated kernel memory conflicts with E820 map\n");
868                 BUG();
869         }
870
871         /*
872          * Check for a conflict of the hypervisor supplied page tables with
873          * the target E820 map.
874          */
875         xen_pt_check_e820();
876
877         xen_reserve_xen_mfnlist();
878
879         /* Check for a conflict of the initrd with the target E820 map. */
880         if (xen_is_e820_reserved(boot_params.hdr.ramdisk_image,
881                                  boot_params.hdr.ramdisk_size)) {
882                 phys_addr_t new_area, start, size;
883
884                 new_area = xen_find_free_area(boot_params.hdr.ramdisk_size);
885                 if (!new_area) {
886                         xen_raw_console_write("Can't find new memory area for initrd needed due to E820 map conflict\n");
887                         BUG();
888                 }
889
890                 start = boot_params.hdr.ramdisk_image;
891                 size = boot_params.hdr.ramdisk_size;
892                 xen_phys_memcpy(new_area, start, size);
893                 pr_info("initrd moved from [mem %#010llx-%#010llx] to [mem %#010llx-%#010llx]\n",
894                         start, start + size, new_area, new_area + size);
895                 memblock_free(start, size);
896                 boot_params.hdr.ramdisk_image = new_area;
897                 boot_params.ext_ramdisk_image = new_area >> 32;
898         }
899
900         /*
901          * Set identity map on non-RAM pages and prepare remapping the
902          * underlying RAM.
903          */
904         xen_foreach_remap_area(max_pfn, xen_set_identity_and_remap_chunk);
905
906         pr_info("Released %ld page(s)\n", xen_released_pages);
907
908         return "Xen";
909 }
910
911 static int register_callback(unsigned type, const void *func)
912 {
913         struct callback_register callback = {
914                 .type = type,
915                 .address = XEN_CALLBACK(__KERNEL_CS, func),
916                 .flags = CALLBACKF_mask_events,
917         };
918
919         return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
920 }
921
922 void xen_enable_sysenter(void)
923 {
924         int ret;
925         unsigned sysenter_feature;
926
927         sysenter_feature = X86_FEATURE_SYSENTER32;
928
929         if (!boot_cpu_has(sysenter_feature))
930                 return;
931
932         ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
933         if(ret != 0)
934                 setup_clear_cpu_cap(sysenter_feature);
935 }
936
937 void xen_enable_syscall(void)
938 {
939         int ret;
940
941         ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
942         if (ret != 0) {
943                 printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
944                 /* Pretty fatal; 64-bit userspace has no other
945                    mechanism for syscalls. */
946         }
947
948         if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
949                 ret = register_callback(CALLBACKTYPE_syscall32,
950                                         xen_syscall32_target);
951                 if (ret != 0)
952                         setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
953         }
954 }
955
956 static void __init xen_pvmmu_arch_setup(void)
957 {
958         HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
959         HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
960
961         HYPERVISOR_vm_assist(VMASST_CMD_enable,
962                              VMASST_TYPE_pae_extended_cr3);
963
964         if (register_callback(CALLBACKTYPE_event,
965                               xen_asm_exc_xen_hypervisor_callback) ||
966             register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
967                 BUG();
968
969         xen_enable_sysenter();
970         xen_enable_syscall();
971 }
972
973 /* This function is not called for HVM domains */
974 void __init xen_arch_setup(void)
975 {
976         xen_panic_handler_init();
977         xen_pvmmu_arch_setup();
978
979 #ifdef CONFIG_ACPI
980         if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
981                 printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
982                 disable_acpi();
983         }
984 #endif
985
986         memcpy(boot_command_line, xen_start_info->cmd_line,
987                MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
988                COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
989
990         /* Set up idle, making sure it calls safe_halt() pvop */
991         disable_cpuidle();
992         disable_cpufreq();
993         WARN_ON(xen_set_default_idle());
994 #ifdef CONFIG_NUMA
995         numa_off = 1;
996 #endif
997 }