[POWERPC] pasemi: Fix module information for gpio-mdio
[sfrench/cifs-2.6.git] / arch / powerpc / platforms / 8xx / m8xx_setup.c
1 /*
2  *  Copyright (C) 1995  Linus Torvalds
3  *  Adapted from 'alpha' version by Gary Thomas
4  *  Modified by Cort Dougan (cort@cs.nmt.edu)
5  *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
6  *  Further modified for generic 8xx by Dan.
7  */
8
9 /*
10  * bootup setup stuff..
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19
20 #include <asm/io.h>
21 #include <asm/mpc8xx.h>
22 #include <asm/8xx_immap.h>
23 #include <asm/prom.h>
24 #include <asm/fs_pd.h>
25 #include <mm/mmu_decl.h>
26
27 #include <sysdev/mpc8xx_pic.h>
28 #include <sysdev/commproc.h>
29
30 #ifdef CONFIG_PCMCIA_M8XX
31 struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
32 #endif
33
34 void m8xx_calibrate_decr(void);
35 extern int cpm_pic_init(void);
36 extern int cpm_get_irq(void);
37
38 /* A place holder for time base interrupts, if they are ever enabled. */
39 static irqreturn_t timebase_interrupt(int irq, void *dev)
40 {
41         printk ("timebase_interrupt()\n");
42
43         return IRQ_HANDLED;
44 }
45
46 static struct irqaction tbint_irqaction = {
47         .handler = timebase_interrupt,
48         .mask = CPU_MASK_NONE,
49         .name = "tbint",
50 };
51
52 /* per-board overridable init_internal_rtc() function. */
53 void __init __attribute__ ((weak))
54 init_internal_rtc(void)
55 {
56         sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
57
58         /* Disable the RTC one second and alarm interrupts. */
59         clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
60
61         /* Enable the RTC */
62         setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
63         immr_unmap(sys_tmr);
64 }
65
66 static int __init get_freq(char *name, unsigned long *val)
67 {
68         struct device_node *cpu;
69         const unsigned int *fp;
70         int found = 0;
71
72         /* The cpu node should have timebase and clock frequency properties */
73         cpu = of_find_node_by_type(NULL, "cpu");
74
75         if (cpu) {
76                 fp = of_get_property(cpu, name, NULL);
77                 if (fp) {
78                         found = 1;
79                         *val = *fp;
80                 }
81
82                 of_node_put(cpu);
83         }
84
85         return found;
86 }
87
88 /* The decrementer counts at the system (internal) clock frequency divided by
89  * sixteen, or external oscillator divided by four.  We force the processor
90  * to use system clock divided by sixteen.
91  */
92 void __init mpc8xx_calibrate_decr(void)
93 {
94         struct device_node *cpu;
95         cark8xx_t __iomem *clk_r1;
96         car8xx_t __iomem *clk_r2;
97         sitk8xx_t __iomem *sys_tmr1;
98         sit8xx_t __iomem *sys_tmr2;
99         int irq, virq;
100
101         clk_r1 = immr_map(im_clkrstk);
102
103         /* Unlock the SCCR. */
104         out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
105         out_be32(&clk_r1->cark_sccrk, KAPWR_KEY);
106         immr_unmap(clk_r1);
107
108         /* Force all 8xx processors to use divide by 16 processor clock. */
109         clk_r2 = immr_map(im_clkrst);
110         setbits32(&clk_r2->car_sccr, 0x02000000);
111         immr_unmap(clk_r2);
112
113         /* Processor frequency is MHz.
114          */
115         ppc_tb_freq = 50000000;
116         if (!get_freq("bus-frequency", &ppc_tb_freq)) {
117                 printk(KERN_ERR "WARNING: Estimating decrementer frequency "
118                                 "(not found)\n");
119         }
120         ppc_tb_freq /= 16;
121         ppc_proc_freq = 50000000;
122         if (!get_freq("clock-frequency", &ppc_proc_freq))
123                 printk(KERN_ERR "WARNING: Estimating processor frequency"
124                                 "(not found)\n");
125
126         printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
127
128         /* Perform some more timer/timebase initialization.  This used
129          * to be done elsewhere, but other changes caused it to get
130          * called more than once....that is a bad thing.
131          *
132          * First, unlock all of the registers we are going to modify.
133          * To protect them from corruption during power down, registers
134          * that are maintained by keep alive power are "locked".  To
135          * modify these registers we have to write the key value to
136          * the key location associated with the register.
137          * Some boards power up with these unlocked, while others
138          * are locked.  Writing anything (including the unlock code?)
139          * to the unlocked registers will lock them again.  So, here
140          * we guarantee the registers are locked, then we unlock them
141          * for our use.
142          */
143         sys_tmr1 = immr_map(im_sitk);
144         out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
145         out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
146         out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
147         out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY);
148         out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY);
149         out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY);
150         immr_unmap(sys_tmr1);
151
152         init_internal_rtc();
153
154         /* Enabling the decrementer also enables the timebase interrupts
155          * (or from the other point of view, to get decrementer interrupts
156          * we have to enable the timebase).  The decrementer interrupt
157          * is wired into the vector table, nothing to do here for that.
158          */
159         cpu = of_find_node_by_type(NULL, "cpu");
160         virq= irq_of_parse_and_map(cpu, 0);
161         irq = irq_map[virq].hwirq;
162
163         sys_tmr2 = immr_map(im_sit);
164         out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
165                                         (TBSCR_TBF | TBSCR_TBE));
166         immr_unmap(sys_tmr2);
167
168         if (setup_irq(virq, &tbint_irqaction))
169                 panic("Could not allocate timer IRQ!");
170 }
171
172 /* The RTC on the MPC8xx is an internal register.
173  * We want to protect this during power down, so we need to unlock,
174  * modify, and re-lock.
175  */
176
177 int mpc8xx_set_rtc_time(struct rtc_time *tm)
178 {
179         sitk8xx_t __iomem *sys_tmr1;
180         sit8xx_t __iomem *sys_tmr2;
181         int time;
182
183         sys_tmr1 = immr_map(im_sitk);
184         sys_tmr2 = immr_map(im_sit);
185         time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
186                       tm->tm_hour, tm->tm_min, tm->tm_sec);
187
188         out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
189         out_be32(&sys_tmr2->sit_rtc, time);
190         out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY);
191
192         immr_unmap(sys_tmr2);
193         immr_unmap(sys_tmr1);
194         return 0;
195 }
196
197 void mpc8xx_get_rtc_time(struct rtc_time *tm)
198 {
199         unsigned long data;
200         sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
201
202         /* Get time from the RTC. */
203         data = in_be32(&sys_tmr->sit_rtc);
204         to_tm(data, tm);
205         tm->tm_year -= 1900;
206         tm->tm_mon -= 1;
207         immr_unmap(sys_tmr);
208         return;
209 }
210
211 void mpc8xx_restart(char *cmd)
212 {
213         car8xx_t __iomem *clk_r = immr_map(im_clkrst);
214
215
216         local_irq_disable();
217
218         setbits32(&clk_r->car_plprcr, 0x00000080);
219         /* Clear the ME bit in MSR to cause checkstop on machine check
220         */
221         mtmsr(mfmsr() & ~0x1000);
222
223         in_8(&clk_r->res[0]);
224         panic("Restart failed\n");
225 }
226
227 static void cpm_cascade(unsigned int irq, struct irq_desc *desc)
228 {
229         int cascade_irq;
230
231         if ((cascade_irq = cpm_get_irq()) >= 0) {
232                 struct irq_desc *cdesc = irq_desc + cascade_irq;
233
234                 generic_handle_irq(cascade_irq);
235                 cdesc->chip->eoi(cascade_irq);
236         }
237         desc->chip->eoi(irq);
238 }
239
240 /* Initialize the internal interrupt controller.  The number of
241  * interrupts supported can vary with the processor type, and the
242  * 82xx family can have up to 64.
243  * External interrupts can be either edge or level triggered, and
244  * need to be initialized by the appropriate driver.
245  */
246 void __init m8xx_pic_init(void)
247 {
248         int irq;
249
250         if (mpc8xx_pic_init()) {
251                 printk(KERN_ERR "Failed interrupt 8xx controller  initialization\n");
252                 return;
253         }
254
255         irq = cpm_pic_init();
256         if (irq != NO_IRQ)
257                 set_irq_chained_handler(irq, cpm_cascade);
258 }