arch/powerpc/boot/Makefile

   1 # SPDX-License-Identifier: GPL-2.0
   2 # Makefile for making ELF bootable images for booting on CHRP
   3 # using Open Firmware.
   4 #
   5 # Geert Uytterhoeven    September 1997
   6 #
   7 # Based on coffboot by Paul Mackerras
   8 # Simplified for ppc64 by Todd Inglett
   9 #
  10 # NOTE: this code is built for 32 bit in ELF32 format even though
  11 #       it packages a 64 bit kernel.  We do this to simplify the
  12 #       bootloader and increase compatibility with OpenFirmware.
  13 #
  14 #       To this end we need to define BOOTCC, etc, as the tools
  15 #       needed to build the 32 bit image.  That's normally the same
  16 #       compiler for the rest of the kernel, with the -m32 flag added.
  17 #       To make it easier to setup a cross compiler,
  18 #       CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
  19 #       in the toplevel makefile.
  20
  21 all: $(obj)/zImage
  22
  23 compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP
  24 compress-$(CONFIG_KERNEL_XZ)   := CONFIG_KERNEL_XZ
  25
  26 ifdef CROSS32_COMPILE
  27     BOOTCC := $(CROSS32_COMPILE)gcc
  28     BOOTAR := $(CROSS32_COMPILE)ar
  29 else
  30     BOOTCC := $(CC)
  31     BOOTAR := $(AR)
  32 endif
  33
  34 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
  35                  -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \
  36                  -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
  37                  -D$(compress-y)
  38
  39 ifdef CONFIG_PPC64_BOOT_WRAPPER
  40 BOOTCFLAGS      += -m64
  41 else
  42 BOOTCFLAGS      += -m32
  43 endif
  44
  45 BOOTCFLAGS      += -isystem $(shell $(BOOTCC) -print-file-name=include)
  46
  47 ifdef CONFIG_CPU_BIG_ENDIAN
  48 BOOTCFLAGS      += -mbig-endian
  49 else
  50 BOOTCFLAGS      += -mlittle-endian
  51 BOOTCFLAGS      += $(call cc-option,-mabi=elfv2)
  52 endif
  53
  54 BOOTAFLAGS      := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
  55
  56 BOOTARFLAGS     := -cr$(KBUILD_ARFLAGS)
  57
  58 ifdef CONFIG_DEBUG_INFO
  59 BOOTCFLAGS      += -g
  60 endif
  61
  62 ifeq ($(call cc-option-yn, -fstack-protector),y)
  63 BOOTCFLAGS      += -fno-stack-protector
  64 endif
  65
  66 BOOTCFLAGS      += -I$(objtree)/$(obj) -I$(srctree)/$(obj)
  67
  68 DTC_FLAGS       ?= -p 1024
  69
  70 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
  71 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
  72 $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
  73 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
  74 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
  75 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
  76 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
  77 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
  78 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
  79 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
  80 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
  81
  82 # The pre-boot decompressors pull in a lot of kernel headers and other source
  83 # files. This creates a bit of a dependency headache since we need to copy
  84 # these files into the build dir, fix up any includes and ensure that dependent
  85 # files are copied in the right order.
  86
  87 # these need to be seperate variables because they are copied out of different
  88 # directories in the kernel tree. Sure you COULd merge them, but it's a
  89 # cure-is-worse-than-disease situation.
  90 zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c
  91 zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c
  92 zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h
  93 zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h
  94
  95 $(addprefix $(obj)/, decompress.o): \
  96         $(addprefix $(obj)/,$(zlib-decomp-y))
  97
  98 $(addprefix $(obj)/, $(zlib-decomp-y)): \
  99         $(addprefix $(obj)/,$(zliblinuxheader-y)) \
 100         $(addprefix $(obj)/,$(zlibheader-y)) \
 101         $(addprefix $(obj)/,$(zlib-y))
 102
 103 $(addprefix $(obj)/,$(zlib-y)): \
 104         $(addprefix $(obj)/,$(zliblinuxheader-y)) \
 105         $(addprefix $(obj)/,$(zlibheader-y))
 106
 107 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 108 libfdtheader := fdt.h libfdt.h libfdt_internal.h
 109
 110 $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \
 111         treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \
 112         $(addprefix $(obj)/,$(libfdtheader))
 113
 114 src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
 115                 $(libfdt) libfdt-wrapper.c \
 116                 ns16550.c serial.c simple_alloc.c div64.S util.S \
 117                 elf_util.c $(zlib-y) devtree.c stdlib.c \
 118                 oflib.c ofconsole.c cuboot.c
 119
 120 src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c
 121 src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c
 122 ifndef CONFIG_PPC64_BOOT_WRAPPER
 123 src-wlib-y += crtsavres.S
 124 endif
 125 src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
 126 src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
 127 src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
 128 src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
 129 src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
 130 src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
 131 src-wlib-$(CONFIG_CPM) += cpm-serial.c
 132
 133 src-plat-y := of.c epapr.c
 134 src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
 135                                 treeboot-walnut.c cuboot-acadia.c \
 136                                 cuboot-kilauea.c simpleboot.c \
 137                                 virtex405-head.S virtex.c
 138 src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 139                                 cuboot-bamboo.c cuboot-sam440ep.c \
 140                                 cuboot-sequoia.c cuboot-rainier.c \
 141                                 cuboot-taishan.c cuboot-katmai.c \
 142                                 cuboot-warp.c cuboot-yosemite.c \
 143                                 treeboot-iss4xx.c treeboot-currituck.c \
 144                                 treeboot-akebono.c \
 145                                 simpleboot.c fixed-head.S virtex.c
 146 src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
 147 src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
 148 src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
 149 src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
 150 src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
 151 src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
 152                                         gamecube-head.S gamecube.c \
 153                                         wii-head.S wii.c holly.c \
 154                                         fixed-head.S mvme5100.c
 155 src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
 156 src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
 157 src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
 158 src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
 159 src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
 160 src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
 161 src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
 162
 163 src-wlib := $(sort $(src-wlib-y))
 164 src-plat := $(sort $(src-plat-y))
 165 src-boot := $(src-wlib) $(src-plat) empty.c
 166
 167 src-boot := $(addprefix $(obj)/, $(src-boot))
 168 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
 169 obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
 170 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
 171 obj-plat: $(libfdt)
 172
 173 quiet_cmd_copy_kern_src = COPY    $@
 174       cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@
 175
 176 $(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
 177         $(call cmd,copy_kern_src)
 178
 179 $(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
 180         $(call cmd,copy_kern_src)
 181
 182 $(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/%
 183         $(call cmd,copy_kern_src)
 184
 185 $(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/%
 186         $(call cmd,copy_kern_src)
 187
 188 quiet_cmd_copy_libfdt = COPY    $@
 189       cmd_copy_libfdt = cp $< $@
 190
 191 $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
 192         $(call cmd,copy_libfdt)
 193
 194 $(obj)/empty.c:
 195         $(Q)touch $@
 196
 197 $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
 198         $(Q)cp $< $@
 199
 200 $(obj)/serial.c: $(obj)/autoconf.h
 201
 202 $(obj)/autoconf.h: $(obj)/%: $(objtree)/include/generated/%
 203         $(Q)cp $< $@
 204
 205 clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
 206                 $(zlib-decomp-) $(libfdt) $(libfdtheader) \
 207                 autoconf.h empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
 208
 209 quiet_cmd_bootcc = BOOTCC  $@
 210       cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
 211
 212 quiet_cmd_bootas = BOOTAS  $@
 213       cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 214
 215 quiet_cmd_bootar = BOOTAR  $@
 216       cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 217
 218 $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
 219         $(call if_changed_dep,bootcc)
 220 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
 221         $(Q)mkdir -p $(dir $@)
 222         $(call if_changed_dep,bootcc)
 223 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 224         $(Q)mkdir -p $(dir $@)
 225         $(call if_changed_dep,bootas)
 226
 227 $(obj)/wrapper.a: $(obj-wlib) FORCE
 228         $(call if_changed,bootar)
 229
 230 hostprogs-y     := addnote hack-coff mktree
 231
 232 targets         += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 233 extra-y         := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
 234                    $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
 235
 236 dtstree         := $(srctree)/$(src)/dts
 237
 238 wrapper         :=$(srctree)/$(src)/wrapper
 239 wrapperbits     := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
 240                         $(wrapper) FORCE
 241
 242 #############
 243 # Bits for building various flavours of zImage
 244
 245 ifneq ($(CROSS32_COMPILE),)
 246 CROSSWRAP := -C "$(CROSS32_COMPILE)"
 247 else
 248 ifneq ($(CROSS_COMPILE),)
 249 CROSSWRAP := -C "$(CROSS_COMPILE)"
 250 endif
 251 endif
 252
 253 compressor-$(CONFIG_KERNEL_GZIP) := gz
 254 compressor-$(CONFIG_KERNEL_XZ)   := xz
 255
 256 # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
 257 quiet_cmd_wrap  = WRAP    $@
 258       cmd_wrap  =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
 259                 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
 260                 vmlinux
 261
 262 image-$(CONFIG_PPC_PSERIES)             += zImage.pseries
 263 image-$(CONFIG_PPC_POWERNV)             += zImage.pseries
 264 image-$(CONFIG_PPC_MAPLE)               += zImage.maple
 265 image-$(CONFIG_PPC_IBM_CELL_BLADE)      += zImage.pseries
 266 image-$(CONFIG_PPC_PS3)                 += dtbImage.ps3
 267 image-$(CONFIG_PPC_CHRP)                += zImage.chrp
 268 image-$(CONFIG_PPC_EFIKA)               += zImage.chrp
 269 image-$(CONFIG_PPC_PMAC)                += zImage.pmac
 270 image-$(CONFIG_PPC_HOLLY)               += dtbImage.holly
 271 image-$(CONFIG_DEFAULT_UIMAGE)          += uImage
 272 image-$(CONFIG_EPAPR_BOOT)              += zImage.epapr
 273
 274 #
 275 # Targets which embed a device tree blob
 276 #
 277 # Theses are default targets to build images which embed device tree blobs.
 278 # They are only required on boards which do not have FDT support in firmware.
 279 # Boards with newish u-boot firmware can use the uImage target above
 280 #
 281
 282 # Board ports in arch/powerpc/platform/40x/Kconfig
 283 image-$(CONFIG_EP405)                   += dtbImage.ep405
 284 image-$(CONFIG_HOTFOOT)                 += cuImage.hotfoot
 285 image-$(CONFIG_WALNUT)                  += treeImage.walnut
 286 image-$(CONFIG_ACADIA)                  += cuImage.acadia
 287 image-$(CONFIG_OBS600)                  += uImage.obs600
 288
 289 # Board ports in arch/powerpc/platform/44x/Kconfig
 290 image-$(CONFIG_EBONY)                   += treeImage.ebony cuImage.ebony
 291 image-$(CONFIG_BAMBOO)                  += treeImage.bamboo cuImage.bamboo
 292 image-$(CONFIG_SAM440EP)                += cuImage.sam440ep
 293 image-$(CONFIG_SEQUOIA)                 += cuImage.sequoia
 294 image-$(CONFIG_RAINIER)                 += cuImage.rainier
 295 image-$(CONFIG_TAISHAN)                 += cuImage.taishan
 296 image-$(CONFIG_KATMAI)                  += cuImage.katmai
 297 image-$(CONFIG_WARP)                    += cuImage.warp
 298 image-$(CONFIG_YOSEMITE)                += cuImage.yosemite
 299 image-$(CONFIG_ISS4xx)                  += treeImage.iss4xx \
 300                                            treeImage.iss4xx-mpic
 301 image-$(CONFIG_CURRITUCK)                       += treeImage.currituck
 302 image-$(CONFIG_AKEBONO)                 += treeImage.akebono
 303
 304 # Board ports in arch/powerpc/platform/8xx/Kconfig
 305 image-$(CONFIG_MPC86XADS)               += cuImage.mpc866ads
 306 image-$(CONFIG_MPC885ADS)               += cuImage.mpc885ads
 307 image-$(CONFIG_PPC_EP88XC)              += dtbImage.ep88xc
 308 image-$(CONFIG_PPC_ADDER875)            += cuImage.adder875-uboot \
 309                                            dtbImage.adder875-redboot
 310
 311 # Board ports in arch/powerpc/platform/52xx/Kconfig
 312 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200
 313 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200b
 314 image-$(CONFIG_PPC_MEDIA5200)           += cuImage.media5200
 315
 316 # Board ports in arch/powerpc/platform/82xx/Kconfig
 317 image-$(CONFIG_MPC8272_ADS)             += cuImage.mpc8272ads
 318 image-$(CONFIG_PQ2FADS)                 += cuImage.pq2fads
 319 image-$(CONFIG_EP8248E)                 += dtbImage.ep8248e
 320
 321 # Board ports in arch/powerpc/platform/83xx/Kconfig
 322 image-$(CONFIG_MPC832x_MDS)             += cuImage.mpc832x_mds
 323 image-$(CONFIG_MPC832x_RDB)             += cuImage.mpc832x_rdb
 324 image-$(CONFIG_MPC834x_ITX)             += cuImage.mpc8349emitx \
 325                                            cuImage.mpc8349emitxgp
 326 image-$(CONFIG_MPC834x_MDS)             += cuImage.mpc834x_mds
 327 image-$(CONFIG_MPC836x_MDS)             += cuImage.mpc836x_mds
 328 image-$(CONFIG_ASP834x)                 += dtbImage.asp834x-redboot
 329
 330 # Board ports in arch/powerpc/platform/85xx/Kconfig
 331 image-$(CONFIG_MPC8540_ADS)             += cuImage.mpc8540ads
 332 image-$(CONFIG_MPC8560_ADS)             += cuImage.mpc8560ads
 333 image-$(CONFIG_MPC85xx_CDS)             += cuImage.mpc8541cds \
 334                                            cuImage.mpc8548cds_32b \
 335                                            cuImage.mpc8555cds
 336 image-$(CONFIG_MPC85xx_MDS)             += cuImage.mpc8568mds
 337 image-$(CONFIG_MPC85xx_DS)              += cuImage.mpc8544ds \
 338                                            cuImage.mpc8572ds
 339 image-$(CONFIG_TQM8540)                 += cuImage.tqm8540
 340 image-$(CONFIG_TQM8541)                 += cuImage.tqm8541
 341 image-$(CONFIG_TQM8548)                 += cuImage.tqm8548
 342 image-$(CONFIG_TQM8555)                 += cuImage.tqm8555
 343 image-$(CONFIG_TQM8560)                 += cuImage.tqm8560
 344 image-$(CONFIG_SBC8548)                 += cuImage.sbc8548
 345 image-$(CONFIG_KSI8560)                 += cuImage.ksi8560
 346
 347 # Board ports in arch/powerpc/platform/86xx/Kconfig
 348 image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
 349
 350 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 351 image-$(CONFIG_STORCENTER)              += cuImage.storcenter
 352 image-$(CONFIG_MPC7448HPC2)             += cuImage.mpc7448hpc2
 353 image-$(CONFIG_GAMECUBE)                += dtbImage.gamecube
 354 image-$(CONFIG_WII)                     += dtbImage.wii
 355 image-$(CONFIG_MVME5100)                += dtbImage.mvme5100
 356
 357 # Board port in arch/powerpc/platform/amigaone/Kconfig
 358 image-$(CONFIG_AMIGAONE)                += cuImage.amigaone
 359
 360 # For 32-bit powermacs, build the COFF and miboot images
 361 # as well as the ELF images.
 362 ifdef CONFIG_PPC32
 363 image-$(CONFIG_PPC_PMAC)        += zImage.coff zImage.miboot
 364 endif
 365
 366 # Allow extra targets to be added to the defconfig
 367 image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
 368
 369 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-))
 370 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 371                 $(patsubst dtbImage%, dtbImage.initrd%, \
 372                 $(patsubst simpleImage%, simpleImage.initrd%, \
 373                 $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
 374 initrd-y := $(filter-out $(image-y), $(initrd-y))
 375 targets += $(image-y) $(initrd-y)
 376
 377 $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
 378
 379 # Don't put the ramdisk on the pattern rule; when its missing make will try
 380 # the pattern rule with less dependencies that also matches (even with the
 381 # hard dependency listed).
 382 $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE
 383         $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
 384
 385 $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE
 386         $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
 387
 388 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
 389 $(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
 390         $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
 391
 392 $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
 393         $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
 394
 395 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
 396 # prefix
 397 $(obj)/vmlinux.strip: vmlinux
 398         $(STRIP) -s -R .comment $< -o $@
 399
 400 $(obj)/uImage: vmlinux $(wrapperbits) FORCE
 401         $(call if_changed,wrap,uboot)
 402
 403 $(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 404         $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
 405
 406 $(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 407         $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
 408
 409 $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 410         $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
 411
 412 $(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 413         $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
 414
 415 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 416         $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
 417
 418 $(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 419         $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
 420
 421 $(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 422         $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
 423
 424 $(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
 425         $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
 426
 427 # Needed for the above targets to work with dts/fsl/ files
 428 $(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
 429         @cp $< $@
 430
 431 # If there isn't a platform selected then just strip the vmlinux.
 432 ifeq (,$(image-y))
 433 image-y := vmlinux.strip
 434 endif
 435
 436 $(obj)/zImage:          $(addprefix $(obj)/, $(image-y))
 437         $(Q)rm -f $@; ln $< $@
 438 $(obj)/zImage.initrd:   $(addprefix $(obj)/, $(initrd-y))
 439         $(Q)rm -f $@; ln $< $@
 440
 441 # Only install the vmlinux
 442 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 443         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
 444
 445 # Install the vmlinux and other built boot targets.
 446 zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 447         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
 448
 449 # anything not in $(targets)
 450 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 451         zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 452         zImage.miboot zImage.pmac zImage.pseries \
 453         zImage.maple simpleImage.* otheros.bld
 454
 455 # clean up files cached by wrapper
 456 clean-kernel-base := vmlinux.strip vmlinux.bin
 457 clean-kernel := $(addsuffix .gz,$(clean-kernel-base))
 458 clean-kernel += $(addsuffix .xz,$(clean-kernel-base))
 459 # If not absolute clean-files are relative to $(obj).
 460 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
 461
 462 WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
 463 WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
 464 WRAPPER_BINDIR := /usr/sbin
 465 INSTALL := install
 466
 467 extra-installed         := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
 468 hostprogs-installed     := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
 469 wrapper-installed       := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
 470 dts-installed           := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
 471
 472 all-installed           := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
 473
 474 quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
 475       cmd_mkdir           = mkdir -p $@
 476
 477 quiet_cmd_install         = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
 478       cmd_install         = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
 479
 480 quiet_cmd_install_dts     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
 481       cmd_install_dts     = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
 482
 483 quiet_cmd_install_exe     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
 484       cmd_install_exe     = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
 485
 486 quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
 487       cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
 488                                 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
 489                                           -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
 490
 491
 492 $(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
 493         $(call cmd,mkdir)
 494
 495 $(extra-installed)      : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
 496         $(call cmd,install)
 497
 498 $(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
 499         $(call cmd,install_exe)
 500
 501 $(dts-installed)        : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
 502         $(call cmd,install_dts)
 503
 504 $(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
 505         $(call cmd,install_wrapper)
 506
 507 $(obj)/bootwrapper_install: $(all-installed)