Merge tag 'arc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
[sfrench/cifs-2.6.git] / arch / nios2 / Kconfig
1 config NIOS2
2         def_bool y
3         select ARCH_WANT_OPTIONAL_GPIOLIB
4         select CLKSRC_OF
5         select GENERIC_ATOMIC64
6         select GENERIC_CLOCKEVENTS
7         select GENERIC_CPU_DEVICES
8         select GENERIC_IRQ_PROBE
9         select GENERIC_IRQ_SHOW
10         select HAVE_ARCH_TRACEHOOK
11         select IRQ_DOMAIN
12         select MODULES_USE_ELF_RELA
13         select OF
14         select OF_EARLY_FLATTREE
15         select SOC_BUS
16         select SPARSE_IRQ
17         select USB_ARCH_HAS_HCD if USB_SUPPORT
18
19 config GENERIC_CSUM
20         def_bool y
21
22 config GENERIC_HWEIGHT
23         def_bool y
24
25 config GENERIC_CALIBRATE_DELAY
26         def_bool y
27
28 config NO_IOPORT_MAP
29         def_bool y
30
31 config HAS_DMA
32         def_bool y
33
34 config FPU
35         def_bool n
36
37 config SWAP
38         def_bool n
39
40 config RWSEM_GENERIC_SPINLOCK
41         def_bool y
42
43 config TRACE_IRQFLAGS_SUPPORT
44         def_bool n
45
46 source "init/Kconfig"
47
48 menu "Kernel features"
49
50 source "kernel/Kconfig.preempt"
51
52 source "kernel/Kconfig.freezer"
53
54 source "kernel/Kconfig.hz"
55
56 source "mm/Kconfig"
57
58 config FORCE_MAX_ZONEORDER
59         int "Maximum zone order"
60         range 9 20
61         default "11"
62         help
63           The kernel memory allocator divides physically contiguous memory
64           blocks into "zones", where each zone is a power of two number of
65           pages.  This option selects the largest power of two that the kernel
66           keeps in the memory allocator.  If you need to allocate very large
67           blocks of physically contiguous memory, then you may need to
68           increase this value.
69
70           This config option is actually maximum order plus one. For example,
71           a value of 11 means that the largest free memory block is 2^10 pages.
72
73 endmenu
74
75 source "arch/nios2/platform/Kconfig.platform"
76
77 menu "Processor type and features"
78
79 config MMU
80         def_bool y
81
82 config NR_CPUS
83         int
84         default "1"
85
86 config NIOS2_ALIGNMENT_TRAP
87         bool "Catch alignment trap"
88         default y
89         help
90           Nios II CPUs cannot fetch/store data which is not bus aligned,
91           i.e., a 2 or 4 byte fetch must start at an address divisible by
92           2 or 4. Any non-aligned load/store instructions will be trapped and
93           emulated in software if you say Y here, which has a performance
94           impact.
95
96 comment "Boot options"
97
98 config CMDLINE_BOOL
99         bool "Default bootloader kernel arguments"
100         default y
101
102 config CMDLINE
103         string "Default kernel command string"
104         default ""
105         depends on CMDLINE_BOOL
106         help
107           On some platforms, there is currently no way for the boot loader to
108           pass arguments to the kernel. For these platforms, you can supply
109           some command-line options at build time by entering them here.  In
110           other cases you can specify kernel args so that you don't have
111           to set them up in board prom initialization routines.
112
113 config CMDLINE_FORCE
114         bool "Force default kernel command string"
115         depends on CMDLINE_BOOL
116         help
117           Set this to have arguments from the default kernel command string
118           override those passed by the boot loader.
119
120 config NIOS2_CMDLINE_IGNORE_DTB
121         bool "Ignore kernel command string from DTB"
122         depends on CMDLINE_BOOL
123         depends on !CMDLINE_FORCE
124         default y
125         help
126           Set this to ignore the bootargs property from the devicetree's
127           chosen node and fall back to CMDLINE if nothing is passed.
128
129 config NIOS2_PASS_CMDLINE
130         bool "Passed kernel command line from u-boot"
131         default n
132         help
133           Use bootargs env variable from u-boot for kernel command line.
134           will override "Default kernel command string".
135           Say N if you are unsure.
136
137 endmenu
138
139 menu "Advanced setup"
140
141 config ADVANCED_OPTIONS
142         bool "Prompt for advanced kernel configuration options"
143         help
144
145 comment "Default settings for advanced configuration options are used"
146         depends on !ADVANCED_OPTIONS
147
148 config NIOS2_KERNEL_MMU_REGION_BASE_BOOL
149         bool "Set custom kernel MMU region base address"
150         depends on ADVANCED_OPTIONS
151         help
152           This option allows you to set the virtual address of the kernel MMU region.
153
154           Say N here unless you know what you are doing.
155
156 config NIOS2_KERNEL_MMU_REGION_BASE
157         hex "Virtual base address of the kernel MMU region " if NIOS2_KERNEL_MMU_REGION_BASE_BOOL
158         default "0x80000000"
159         help
160           This option allows you to set the virtual base address of the kernel MMU region.
161
162 config NIOS2_KERNEL_REGION_BASE_BOOL
163         bool "Set custom kernel region base address"
164         depends on ADVANCED_OPTIONS
165         help
166           This option allows you to set the virtual address of the kernel region.
167
168           Say N here unless you know what you are doing.
169
170 config NIOS2_KERNEL_REGION_BASE
171         hex "Virtual base address of the kernel region " if NIOS2_KERNEL_REGION_BASE_BOOL
172         default "0xc0000000"
173
174 config NIOS2_IO_REGION_BASE_BOOL
175         bool "Set custom I/O region base address"
176         depends on ADVANCED_OPTIONS
177         help
178           This option allows you to set the virtual address of the I/O region.
179
180           Say N here unless you know what you are doing.
181
182 config NIOS2_IO_REGION_BASE
183         hex "Virtual base address of the I/O region" if NIOS2_IO_REGION_BASE_BOOL
184         default "0xe0000000"
185
186 endmenu
187
188 menu "Executable file formats"
189
190 source "fs/Kconfig.binfmt"
191
192 endmenu
193
194 source "net/Kconfig"
195
196 source "drivers/Kconfig"
197
198 source "fs/Kconfig"
199
200 source "arch/nios2/Kconfig.debug"
201
202 source "security/Kconfig"
203
204 source "crypto/Kconfig"
205
206 source "lib/Kconfig"