arch/mips/loongson64/lemote-2f/ec_kb3310b.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
   4  *
   5  *  Copyright (C) 2008 Lemote Inc.
   6  *  Author: liujl <liujl@lemote.com>, 2008-04-20
   7  */
   8
   9 #include <linux/io.h>
  10 #include <linux/export.h>
  11 #include <linux/spinlock.h>
  12 #include <linux/delay.h>
  13
  14 #include "ec_kb3310b.h"
  15
  16 static DEFINE_SPINLOCK(index_access_lock);
  17 static DEFINE_SPINLOCK(port_access_lock);
  18
  19 unsigned char ec_read(unsigned short addr)
  20 {
  21         unsigned char value;
  22         unsigned long flags;
  23
  24         spin_lock_irqsave(&index_access_lock, flags);
  25         outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
  26         outb((addr & 0x00ff), EC_IO_PORT_LOW);
  27         value = inb(EC_IO_PORT_DATA);
  28         spin_unlock_irqrestore(&index_access_lock, flags);
  29
  30         return value;
  31 }
  32 EXPORT_SYMBOL_GPL(ec_read);
  33
  34 void ec_write(unsigned short addr, unsigned char val)
  35 {
  36         unsigned long flags;
  37
  38         spin_lock_irqsave(&index_access_lock, flags);
  39         outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
  40         outb((addr & 0x00ff), EC_IO_PORT_LOW);
  41         outb(val, EC_IO_PORT_DATA);
  42         /*  flush the write action */
  43         inb(EC_IO_PORT_DATA);
  44         spin_unlock_irqrestore(&index_access_lock, flags);
  45 }
  46 EXPORT_SYMBOL_GPL(ec_write);
  47
  48 /*
  49  * This function is used for EC command writes and corresponding status queries.
  50  */
  51 int ec_query_seq(unsigned char cmd)
  52 {
  53         int timeout;
  54         unsigned char status;
  55         unsigned long flags;
  56         int ret = 0;
  57
  58         spin_lock_irqsave(&port_access_lock, flags);
  59
  60         /* make chip goto reset mode */
  61         udelay(EC_REG_DELAY);
  62         outb(cmd, EC_CMD_PORT);
  63         udelay(EC_REG_DELAY);
  64
  65         /* check if the command is received by ec */
  66         timeout = EC_CMD_TIMEOUT;
  67         status = inb(EC_STS_PORT);
  68         while (timeout-- && (status & (1 << 1))) {
  69                 status = inb(EC_STS_PORT);
  70                 udelay(EC_REG_DELAY);
  71         }
  72
  73         spin_unlock_irqrestore(&port_access_lock, flags);
  74
  75         if (timeout <= 0) {
  76                 printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
  77                 ret = -EINVAL;
  78         } else
  79                 printk(KERN_INFO
  80                            "(%x/%d)ec issued command %d status : 0x%x\n",
  81                            timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
  82
  83         return ret;
  84 }
  85 EXPORT_SYMBOL_GPL(ec_query_seq);
  86
  87 /*
  88  * Send query command to EC to get the proper event number
  89  */
  90 int ec_query_event_num(void)
  91 {
  92         return ec_query_seq(CMD_GET_EVENT_NUM);
  93 }
  94 EXPORT_SYMBOL(ec_query_event_num);
  95
  96 /*
  97  * Get event number from EC
  98  *
  99  * NOTE: This routine must follow the query_event_num function in the
 100  * interrupt.
 101  */
 102 int ec_get_event_num(void)
 103 {
 104         int timeout = 100;
 105         unsigned char value;
 106         unsigned char status;
 107
 108         udelay(EC_REG_DELAY);
 109         status = inb(EC_STS_PORT);
 110         udelay(EC_REG_DELAY);
 111         while (timeout-- && !(status & (1 << 0))) {
 112                 status = inb(EC_STS_PORT);
 113                 udelay(EC_REG_DELAY);
 114         }
 115         if (timeout <= 0) {
 116                 pr_info("%s: get event number timeout.\n", __func__);
 117
 118                 return -EINVAL;
 119         }
 120         value = inb(EC_DAT_PORT);
 121         udelay(EC_REG_DELAY);
 122
 123         return value;
 124 }
 125 EXPORT_SYMBOL(ec_get_event_num);