Merge branch 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[sfrench/cifs-2.6.git] / arch / arm64 / boot / dts / rockchip / rk3399-rockpro64.dts
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
5  */
6
7 /dts-v1/;
8 #include <dt-bindings/input/linux-event-codes.h>
9 #include <dt-bindings/pwm/pwm.h>
10 #include "rk3399.dtsi"
11 #include "rk3399-opp.dtsi"
12
13 / {
14         model = "Pine64 RockPro64";
15         compatible = "pine64,rockpro64", "rockchip,rk3399";
16
17         chosen {
18                 stdout-path = "serial2:1500000n8";
19         };
20
21         clkin_gmac: external-gmac-clock {
22                 compatible = "fixed-clock";
23                 clock-frequency = <125000000>;
24                 clock-output-names = "clkin_gmac";
25                 #clock-cells = <0>;
26         };
27
28         gpio-keys {
29                 compatible = "gpio-keys";
30                 autorepeat;
31                 pinctrl-names = "default";
32                 pinctrl-0 = <&pwrbtn>;
33
34                 power {
35                         debounce-interval = <100>;
36                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
37                         label = "GPIO Key Power";
38                         linux,code = <KEY_POWER>;
39                         wakeup-source;
40                 };
41         };
42
43         leds {
44                 compatible = "gpio-leds";
45                 pinctrl-names = "default";
46                 pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
47
48                 work-led {
49                         label = "work";
50                         default-state = "on";
51                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
52                 };
53
54                 diy-led {
55                         label = "diy";
56                         default-state = "off";
57                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
58                 };
59         };
60
61         sdio_pwrseq: sdio-pwrseq {
62                 compatible = "mmc-pwrseq-simple";
63                 clocks = <&rk808 1>;
64                 clock-names = "ext_clock";
65                 pinctrl-names = "default";
66                 pinctrl-0 = <&wifi_enable_h>;
67
68                 /*
69                  * On the module itself this is one of these (depending
70                  * on the actual card populated):
71                  * - SDIO_RESET_L_WL_REG_ON
72                  * - PDN (power down when low)
73                  */
74                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
75         };
76
77         vcc12v_dcin: vcc12v-dcin {
78                 compatible = "regulator-fixed";
79                 regulator-name = "vcc12v_dcin";
80                 regulator-always-on;
81                 regulator-boot-on;
82                 regulator-min-microvolt = <12000000>;
83                 regulator-max-microvolt = <12000000>;
84         };
85
86         /* switched by pmic_sleep */
87         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
88                 compatible = "regulator-fixed";
89                 regulator-name = "vcc1v8_s3";
90                 regulator-always-on;
91                 regulator-boot-on;
92                 regulator-min-microvolt = <1800000>;
93                 regulator-max-microvolt = <1800000>;
94                 vin-supply = <&vcc_1v8>;
95         };
96
97         vcc3v3_pcie: vcc3v3-pcie-regulator {
98                 compatible = "regulator-fixed";
99                 enable-active-high;
100                 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
101                 pinctrl-names = "default";
102                 pinctrl-0 = <&pcie_pwr_en>;
103                 regulator-name = "vcc3v3_pcie";
104                 regulator-always-on;
105                 regulator-boot-on;
106                 vin-supply = <&vcc12v_dcin>;
107         };
108
109         vcc3v3_sys: vcc3v3-sys {
110                 compatible = "regulator-fixed";
111                 regulator-name = "vcc3v3_sys";
112                 regulator-always-on;
113                 regulator-boot-on;
114                 regulator-min-microvolt = <3300000>;
115                 regulator-max-microvolt = <3300000>;
116                 vin-supply = <&vcc5v0_sys>;
117         };
118
119         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
120         vcc5v0_host: vcc5v0-host-regulator {
121                 compatible = "regulator-fixed";
122                 enable-active-high;
123                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
124                 pinctrl-names = "default";
125                 pinctrl-0 = <&vcc5v0_host_en>;
126                 regulator-name = "vcc5v0_host";
127                 regulator-always-on;
128                 vin-supply = <&vcc5v0_usb>;
129         };
130
131         vcc5v0_typec: vcc5v0-typec-regulator {
132                 compatible = "regulator-fixed";
133                 enable-active-high;
134                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
135                 pinctrl-names = "default";
136                 pinctrl-0 = <&vcc5v0_typec_en>;
137                 regulator-name = "vcc5v0_typec";
138                 regulator-always-on;
139                 vin-supply = <&vcc5v0_usb>;
140         };
141
142         vcc5v0_sys: vcc5v0-sys {
143                 compatible = "regulator-fixed";
144                 regulator-name = "vcc5v0_sys";
145                 regulator-always-on;
146                 regulator-boot-on;
147                 regulator-min-microvolt = <5000000>;
148                 regulator-max-microvolt = <5000000>;
149                 vin-supply = <&vcc12v_dcin>;
150         };
151
152         vcc5v0_usb: vcc5v0-usb {
153                 compatible = "regulator-fixed";
154                 regulator-name = "vcc5v0_usb";
155                 regulator-always-on;
156                 regulator-boot-on;
157                 regulator-min-microvolt = <5000000>;
158                 regulator-max-microvolt = <5000000>;
159                 vin-supply = <&vcc12v_dcin>;
160         };
161
162         vdd_log: vdd-log {
163                 compatible = "pwm-regulator";
164                 pwms = <&pwm2 0 25000 1>;
165                 regulator-name = "vdd_log";
166                 regulator-always-on;
167                 regulator-boot-on;
168                 regulator-min-microvolt = <800000>;
169                 regulator-max-microvolt = <1400000>;
170                 vin-supply = <&vcc5v0_sys>;
171         };
172 };
173
174 &cpu_l0 {
175         cpu-supply = <&vdd_cpu_l>;
176 };
177
178 &cpu_l1 {
179         cpu-supply = <&vdd_cpu_l>;
180 };
181
182 &cpu_l2 {
183         cpu-supply = <&vdd_cpu_l>;
184 };
185
186 &cpu_l3 {
187         cpu-supply = <&vdd_cpu_l>;
188 };
189
190 &cpu_b0 {
191         cpu-supply = <&vdd_cpu_b>;
192 };
193
194 &cpu_b1 {
195         cpu-supply = <&vdd_cpu_b>;
196 };
197
198 &emmc_phy {
199         status = "okay";
200 };
201
202 &gmac {
203         assigned-clocks = <&cru SCLK_RMII_SRC>;
204         assigned-clock-parents = <&clkin_gmac>;
205         clock_in_out = "input";
206         phy-supply = <&vcc_lan>;
207         phy-mode = "rgmii";
208         pinctrl-names = "default";
209         pinctrl-0 = <&rgmii_pins>;
210         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
211         snps,reset-active-low;
212         snps,reset-delays-us = <0 10000 50000>;
213         tx_delay = <0x28>;
214         rx_delay = <0x11>;
215         status = "okay";
216 };
217
218 &hdmi {
219         ddc-i2c-bus = <&i2c3>;
220         pinctrl-names = "default";
221         pinctrl-0 = <&hdmi_cec>;
222         status = "okay";
223 };
224
225 &gpu {
226         mali-supply = <&vdd_gpu>;
227         status = "okay";
228 };
229
230 &i2c0 {
231         clock-frequency = <400000>;
232         i2c-scl-rising-time-ns = <168>;
233         i2c-scl-falling-time-ns = <4>;
234         status = "okay";
235
236         rk808: pmic@1b {
237                 compatible = "rockchip,rk808";
238                 reg = <0x1b>;
239                 interrupt-parent = <&gpio1>;
240                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
241                 #clock-cells = <1>;
242                 clock-output-names = "xin32k", "rk808-clkout2";
243                 pinctrl-names = "default";
244                 pinctrl-0 = <&pmic_int_l>;
245                 rockchip,system-power-controller;
246                 wakeup-source;
247
248                 vcc1-supply = <&vcc5v0_sys>;
249                 vcc2-supply = <&vcc5v0_sys>;
250                 vcc3-supply = <&vcc5v0_sys>;
251                 vcc4-supply = <&vcc5v0_sys>;
252                 vcc6-supply = <&vcc5v0_sys>;
253                 vcc7-supply = <&vcc5v0_sys>;
254                 vcc8-supply = <&vcc3v3_sys>;
255                 vcc9-supply = <&vcc5v0_sys>;
256                 vcc10-supply = <&vcc5v0_sys>;
257                 vcc11-supply = <&vcc5v0_sys>;
258                 vcc12-supply = <&vcc3v3_sys>;
259                 vddio-supply = <&vcca_1v8>;
260
261                 regulators {
262                         vdd_center: DCDC_REG1 {
263                                 regulator-name = "vdd_center";
264                                 regulator-always-on;
265                                 regulator-boot-on;
266                                 regulator-min-microvolt = <750000>;
267                                 regulator-max-microvolt = <1350000>;
268                                 regulator-ramp-delay = <6001>;
269                                 regulator-state-mem {
270                                         regulator-off-in-suspend;
271                                 };
272                         };
273
274                         vdd_cpu_l: DCDC_REG2 {
275                                 regulator-name = "vdd_cpu_l";
276                                 regulator-always-on;
277                                 regulator-boot-on;
278                                 regulator-min-microvolt = <750000>;
279                                 regulator-max-microvolt = <1350000>;
280                                 regulator-ramp-delay = <6001>;
281                                 regulator-state-mem {
282                                         regulator-off-in-suspend;
283                                 };
284                         };
285
286                         vcc_ddr: DCDC_REG3 {
287                                 regulator-name = "vcc_ddr";
288                                 regulator-always-on;
289                                 regulator-boot-on;
290                                 regulator-state-mem {
291                                         regulator-on-in-suspend;
292                                 };
293                         };
294
295                         vcc_1v8: DCDC_REG4 {
296                                 regulator-name = "vcc_1v8";
297                                 regulator-always-on;
298                                 regulator-boot-on;
299                                 regulator-min-microvolt = <1800000>;
300                                 regulator-max-microvolt = <1800000>;
301                                 regulator-state-mem {
302                                         regulator-on-in-suspend;
303                                         regulator-suspend-microvolt = <1800000>;
304                                 };
305                         };
306
307                         vcc1v8_dvp: LDO_REG1 {
308                                 regulator-name = "vcc1v8_dvp";
309                                 regulator-always-on;
310                                 regulator-boot-on;
311                                 regulator-min-microvolt = <1800000>;
312                                 regulator-max-microvolt = <1800000>;
313                                 regulator-state-mem {
314                                         regulator-off-in-suspend;
315                                 };
316                         };
317
318                         vcc3v0_touch: LDO_REG2 {
319                                 regulator-name = "vcc3v0_touch";
320                                 regulator-always-on;
321                                 regulator-boot-on;
322                                 regulator-min-microvolt = <3000000>;
323                                 regulator-max-microvolt = <3000000>;
324                                 regulator-state-mem {
325                                         regulator-off-in-suspend;
326                                 };
327                         };
328
329                         vcca_1v8: LDO_REG3 {
330                                 regulator-name = "vcca_1v8";
331                                 regulator-always-on;
332                                 regulator-boot-on;
333                                 regulator-min-microvolt = <1800000>;
334                                 regulator-max-microvolt = <1800000>;
335                                 regulator-state-mem {
336                                         regulator-on-in-suspend;
337                                         regulator-suspend-microvolt = <1800000>;
338                                 };
339                         };
340
341                         vcc_sdio: LDO_REG4 {
342                                 regulator-name = "vcc_sdio";
343                                 regulator-always-on;
344                                 regulator-boot-on;
345                                 regulator-min-microvolt = <1800000>;
346                                 regulator-max-microvolt = <3000000>;
347                                 regulator-state-mem {
348                                         regulator-on-in-suspend;
349                                         regulator-suspend-microvolt = <3000000>;
350                                 };
351                         };
352
353                         vcca3v0_codec: LDO_REG5 {
354                                 regulator-name = "vcca3v0_codec";
355                                 regulator-always-on;
356                                 regulator-boot-on;
357                                 regulator-min-microvolt = <3000000>;
358                                 regulator-max-microvolt = <3000000>;
359                                 regulator-state-mem {
360                                         regulator-off-in-suspend;
361                                 };
362                         };
363
364                         vcc_1v5: LDO_REG6 {
365                                 regulator-name = "vcc_1v5";
366                                 regulator-always-on;
367                                 regulator-boot-on;
368                                 regulator-min-microvolt = <1500000>;
369                                 regulator-max-microvolt = <1500000>;
370                                 regulator-state-mem {
371                                         regulator-on-in-suspend;
372                                         regulator-suspend-microvolt = <1500000>;
373                                 };
374                         };
375
376                         vcca1v8_codec: LDO_REG7 {
377                                 regulator-name = "vcca1v8_codec";
378                                 regulator-always-on;
379                                 regulator-boot-on;
380                                 regulator-min-microvolt = <1800000>;
381                                 regulator-max-microvolt = <1800000>;
382                                 regulator-state-mem {
383                                         regulator-off-in-suspend;
384                                 };
385                         };
386
387                         vcc_3v0: LDO_REG8 {
388                                 regulator-name = "vcc_3v0";
389                                 regulator-always-on;
390                                 regulator-boot-on;
391                                 regulator-min-microvolt = <3000000>;
392                                 regulator-max-microvolt = <3000000>;
393                                 regulator-state-mem {
394                                         regulator-on-in-suspend;
395                                         regulator-suspend-microvolt = <3000000>;
396                                 };
397                         };
398
399                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
400                                 regulator-name = "vcc3v3_s3";
401                                 regulator-always-on;
402                                 regulator-boot-on;
403                                 regulator-state-mem {
404                                         regulator-off-in-suspend;
405                                 };
406                         };
407
408                         vcc3v3_s0: SWITCH_REG2 {
409                                 regulator-name = "vcc3v3_s0";
410                                 regulator-always-on;
411                                 regulator-boot-on;
412                                 regulator-state-mem {
413                                         regulator-off-in-suspend;
414                                 };
415                         };
416                 };
417         };
418
419         vdd_cpu_b: regulator@40 {
420                 compatible = "silergy,syr827";
421                 reg = <0x40>;
422                 fcs,suspend-voltage-selector = <1>;
423                 pinctrl-names = "default";
424                 pinctrl-0 = <&vsel1_gpio>;
425                 regulator-name = "vdd_cpu_b";
426                 regulator-min-microvolt = <712500>;
427                 regulator-max-microvolt = <1500000>;
428                 regulator-ramp-delay = <1000>;
429                 regulator-always-on;
430                 regulator-boot-on;
431                 vin-supply = <&vcc5v0_sys>;
432
433                 regulator-state-mem {
434                         regulator-off-in-suspend;
435                 };
436         };
437
438         vdd_gpu: regulator@41 {
439                 compatible = "silergy,syr828";
440                 reg = <0x41>;
441                 fcs,suspend-voltage-selector = <1>;
442                 pinctrl-names = "default";
443                 pinctrl-0 = <&vsel2_gpio>;
444                 regulator-name = "vdd_gpu";
445                 regulator-min-microvolt = <712500>;
446                 regulator-max-microvolt = <1500000>;
447                 regulator-ramp-delay = <1000>;
448                 regulator-always-on;
449                 regulator-boot-on;
450                 vin-supply = <&vcc5v0_sys>;
451
452                 regulator-state-mem {
453                         regulator-off-in-suspend;
454                 };
455         };
456 };
457
458 &i2c1 {
459         i2c-scl-rising-time-ns = <300>;
460         i2c-scl-falling-time-ns = <15>;
461         status = "okay";
462 };
463
464 &i2c3 {
465         i2c-scl-rising-time-ns = <450>;
466         i2c-scl-falling-time-ns = <15>;
467         status = "okay";
468 };
469
470 &i2c4 {
471         i2c-scl-rising-time-ns = <600>;
472         i2c-scl-falling-time-ns = <20>;
473         status = "okay";
474
475         fusb0: typec-portc@22 {
476                 compatible = "fcs,fusb302";
477                 reg = <0x22>;
478                 interrupt-parent = <&gpio1>;
479                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
480                 pinctrl-names = "default";
481                 pinctrl-0 = <&fusb0_int>;
482                 vbus-supply = <&vcc5v0_typec>;
483                 status = "okay";
484         };
485 };
486
487 &i2s0 {
488         rockchip,playback-channels = <8>;
489         rockchip,capture-channels = <8>;
490         status = "okay";
491 };
492
493 &i2s1 {
494         rockchip,playback-channels = <2>;
495         rockchip,capture-channels = <2>;
496         status = "okay";
497 };
498
499 &i2s2 {
500         status = "okay";
501 };
502
503 &io_domains {
504         status = "okay";
505
506         bt656-supply = <&vcc1v8_dvp>;
507         audio-supply = <&vcca1v8_codec>;
508         sdmmc-supply = <&vcc_sdio>;
509         gpio1830-supply = <&vcc_3v0>;
510 };
511
512 &pmu_io_domains {
513         pmu1830-supply = <&vcc_3v0>;
514         status = "okay";
515 };
516
517 &pinctrl {
518         buttons {
519                 pwrbtn: pwrbtn {
520                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
521                 };
522         };
523
524         fusb302x {
525                 fusb0_int: fusb0-int {
526                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
527                 };
528         };
529
530         leds {
531                 work_led_gpio: work_led-gpio {
532                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
533                 };
534
535                 diy_led_gpio: diy_led-gpio {
536                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
537                 };
538         };
539
540         pcie {
541                 pcie_pwr_en: pcie-pwr-en {
542                         rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
543                 };
544         };
545
546         pmic {
547                 pmic_int_l: pmic-int-l {
548                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
549                 };
550
551                 vsel1_gpio: vsel1-gpio {
552                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
553                 };
554
555                 vsel2_gpio: vsel2-gpio {
556                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
557                 };
558         };
559
560         sdio-pwrseq {
561                 wifi_enable_h: wifi-enable-h {
562                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
563                 };
564         };
565
566         usb-typec {
567                 vcc5v0_typec_en: vcc5v0_typec_en {
568                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
569                 };
570         };
571
572         usb2 {
573                 vcc5v0_host_en: vcc5v0-host-en {
574                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
575                 };
576         };
577 };
578
579 &pwm0 {
580         status = "okay";
581 };
582
583 &pwm2 {
584         status = "okay";
585 };
586
587 &saradc {
588         vref-supply = <&vcca1v8_s3>;
589         status = "okay";
590 };
591
592 &sdmmc {
593         bus-width = <4>;
594         cap-mmc-highspeed;
595         cap-sd-highspeed;
596         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
597         disable-wp;
598         max-frequency = <150000000>;
599         pinctrl-names = "default";
600         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
601         status = "okay";
602 };
603
604 &sdhci {
605         bus-width = <8>;
606         mmc-hs400-1_8v;
607         mmc-hs400-enhanced-strobe;
608         non-removable;
609         status = "okay";
610 };
611
612 &tcphy0 {
613         status = "okay";
614 };
615
616 &tcphy1 {
617         status = "okay";
618 };
619
620 &tsadc {
621         /* tshut mode 0:CRU 1:GPIO */
622         rockchip,hw-tshut-mode = <1>;
623         /* tshut polarity 0:LOW 1:HIGH */
624         rockchip,hw-tshut-polarity = <1>;
625         status = "okay";
626 };
627
628 &u2phy0 {
629         status = "okay";
630
631         u2phy0_otg: otg-port {
632                 status = "okay";
633         };
634
635         u2phy0_host: host-port {
636                 phy-supply = <&vcc5v0_host>;
637                 status = "okay";
638         };
639 };
640
641 &u2phy1 {
642         status = "okay";
643
644         u2phy1_otg: otg-port {
645                 status = "okay";
646         };
647
648         u2phy1_host: host-port {
649                 phy-supply = <&vcc5v0_host>;
650                 status = "okay";
651         };
652 };
653
654 &uart0 {
655         pinctrl-names = "default";
656         pinctrl-0 = <&uart0_xfer &uart0_cts>;
657         status = "okay";
658 };
659
660 &uart2 {
661         status = "okay";
662 };
663
664 &usb_host0_ehci {
665         status = "okay";
666 };
667
668 &usb_host0_ohci {
669         status = "okay";
670 };
671
672 &usb_host1_ehci {
673         status = "okay";
674 };
675
676 &usb_host1_ohci {
677         status = "okay";
678 };
679
680 &usbdrd3_0 {
681         status = "okay";
682 };
683
684 &usbdrd_dwc3_0 {
685         status = "okay";
686         dr_mode = "otg";
687 };
688
689 &usbdrd3_1 {
690         status = "okay";
691 };
692
693 &usbdrd_dwc3_1 {
694         status = "okay";
695         dr_mode = "host";
696 };
697
698 &vopb {
699         status = "okay";
700 };
701
702 &vopb_mmu {
703         status = "okay";
704 };
705
706 &vopl {
707         status = "okay";
708 };
709
710 &vopl_mmu {
711         status = "okay";
712 };