1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2017 PINE64
10 model = "Pine64 Rock64";
11 compatible = "pine64,rock64", "rockchip,rk3328";
14 stdout-path = "serial2:1500000n8";
17 gmac_clkin: external-gmac-clock {
18 compatible = "fixed-clock";
19 clock-frequency = <125000000>;
20 clock-output-names = "gmac_clkin";
24 vcc_sd: sdmmc-regulator {
25 compatible = "regulator-fixed";
26 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
27 pinctrl-names = "default";
28 pinctrl-0 = <&sdmmc0m1_gpio>;
29 regulator-name = "vcc_sd";
30 regulator-min-microvolt = <3300000>;
31 regulator-max-microvolt = <3300000>;
32 vin-supply = <&vcc_io>;
35 vcc_host_5v: vcc-host-5v-regulator {
36 compatible = "regulator-fixed";
38 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
39 pinctrl-names = "default";
40 pinctrl-0 = <&usb30_host_drv>;
41 regulator-name = "vcc_host_5v";
44 vin-supply = <&vcc_sys>;
47 vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
48 compatible = "regulator-fixed";
50 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
51 pinctrl-names = "default";
52 pinctrl-0 = <&usb20_host_drv>;
53 regulator-name = "vcc_host1_5v";
56 vin-supply = <&vcc_sys>;
60 compatible = "regulator-fixed";
61 regulator-name = "vcc_sys";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
69 compatible = "audio-graph-card";
70 label = "rockchip,rk3328";
76 compatible = "linux,spdif-dit";
77 #sound-dai-cells = <0>;
81 remote-endpoint = <&spdif_p0_0>;
91 codec_p0_0: endpoint {
92 remote-endpoint = <&i2s1_p0_0>;
98 cpu-supply = <&vdd_arm>;
102 cpu-supply = <&vdd_arm>;
106 cpu-supply = <&vdd_arm>;
110 cpu-supply = <&vdd_arm>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
120 vmmc-supply = <&vcc_io>;
121 vqmmc-supply = <&vcc18_emmc>;
126 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
127 assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
128 clock_in_out = "input";
129 phy-supply = <&vcc_io>;
131 pinctrl-names = "default";
132 pinctrl-0 = <&rgmiim1_pins>;
133 snps,force_thresh_dma_mode;
134 snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
135 snps,reset-active-low;
136 snps,reset-delays-us = <0 10000 50000>;
154 compatible = "rockchip,rk805";
156 interrupt-parent = <&gpio2>;
157 interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
159 clock-output-names = "xin32k", "rk805-clkout2";
160 pinctrl-names = "default";
161 pinctrl-0 = <&pmic_int_l>;
162 rockchip,system-power-controller;
165 vcc1-supply = <&vcc_sys>;
166 vcc2-supply = <&vcc_sys>;
167 vcc3-supply = <&vcc_sys>;
168 vcc4-supply = <&vcc_sys>;
169 vcc5-supply = <&vcc_io>;
170 vcc6-supply = <&vcc_sys>;
173 vdd_logic: DCDC_REG1 {
174 regulator-name = "vdd_logic";
175 regulator-min-microvolt = <712500>;
176 regulator-max-microvolt = <1450000>;
177 regulator-ramp-delay = <12500>;
180 regulator-state-mem {
181 regulator-on-in-suspend;
182 regulator-suspend-microvolt = <1000000>;
187 regulator-name = "vdd_arm";
188 regulator-min-microvolt = <712500>;
189 regulator-max-microvolt = <1450000>;
190 regulator-ramp-delay = <12500>;
193 regulator-state-mem {
194 regulator-on-in-suspend;
195 regulator-suspend-microvolt = <950000>;
200 regulator-name = "vcc_ddr";
203 regulator-state-mem {
204 regulator-on-in-suspend;
209 regulator-name = "vcc_io";
210 regulator-min-microvolt = <3300000>;
211 regulator-max-microvolt = <3300000>;
214 regulator-state-mem {
215 regulator-on-in-suspend;
216 regulator-suspend-microvolt = <3300000>;
221 regulator-name = "vdd_18";
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;
226 regulator-state-mem {
227 regulator-on-in-suspend;
228 regulator-suspend-microvolt = <1800000>;
232 vcc18_emmc: LDO_REG2 {
233 regulator-name = "vcc_18emmc";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
238 regulator-state-mem {
239 regulator-on-in-suspend;
240 regulator-suspend-microvolt = <1800000>;
245 regulator-name = "vdd_10";
246 regulator-min-microvolt = <1000000>;
247 regulator-max-microvolt = <1000000>;
250 regulator-state-mem {
251 regulator-on-in-suspend;
252 regulator-suspend-microvolt = <1000000>;
263 i2s1_p0_0: endpoint {
266 remote-endpoint = <&codec_p0_0>;
274 vccio1-supply = <&vcc_io>;
275 vccio2-supply = <&vcc18_emmc>;
276 vccio3-supply = <&vcc_io>;
277 vccio4-supply = <&vcc_18>;
278 vccio5-supply = <&vcc_io>;
279 vccio6-supply = <&vcc_io>;
280 pmuio-supply = <&vcc_io>;
285 pmic_int_l: pmic-int-l {
286 rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
291 usb20_host_drv: usb20-host-drv {
292 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
297 usb30_host_drv: usb30-host-drv {
298 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
308 max-frequency = <150000000>;
309 pinctrl-names = "default";
310 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
311 vmmc-supply = <&vcc_sd>;
316 pinctrl-0 = <&spdifm0_tx>;
320 spdif_p0_0: endpoint {
321 remote-endpoint = <&dit_p0_0>;
330 compatible = "jedec,spi-nor";
333 /* maximum speed for Rockchip SPI */
334 spi-max-frequency = <50000000>;
339 rockchip,hw-tshut-mode = <0>;
340 rockchip,hw-tshut-polarity = <0>;
351 u2phy_host: host-port {
355 u2phy_otg: otg-port {