arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

   1 /*
   2  * SAMSUNG Exynos5433 TM2 board device tree source
   3  *
   4  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
   5  *
   6  * Common device tree source file for Samsung's TM2 and TM2E boards
   7  * which are based on Samsung Exynos5433 SoC.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 /dts-v1/;
  15 #include "exynos5433.dtsi"
  16 #include <dt-bindings/clock/samsung,s2mps11.h>
  17 #include <dt-bindings/gpio/gpio.h>
  18 #include <dt-bindings/input/input.h>
  19 #include <dt-bindings/interrupt-controller/irq.h>
  20
  21 / {
  22         aliases {
  23                 gsc0 = &gsc_0;
  24                 gsc1 = &gsc_1;
  25                 gsc2 = &gsc_2;
  26                 pinctrl0 = &pinctrl_alive;
  27                 pinctrl1 = &pinctrl_aud;
  28                 pinctrl2 = &pinctrl_cpif;
  29                 pinctrl3 = &pinctrl_ese;
  30                 pinctrl4 = &pinctrl_finger;
  31                 pinctrl5 = &pinctrl_fsys;
  32                 pinctrl6 = &pinctrl_imem;
  33                 pinctrl7 = &pinctrl_nfc;
  34                 pinctrl8 = &pinctrl_peric;
  35                 pinctrl9 = &pinctrl_touch;
  36                 serial0 = &serial_0;
  37                 serial1 = &serial_1;
  38                 serial2 = &serial_2;
  39                 serial3 = &serial_3;
  40                 spi0 = &spi_0;
  41                 spi1 = &spi_1;
  42                 spi2 = &spi_2;
  43                 spi3 = &spi_3;
  44                 spi4 = &spi_4;
  45                 mshc0 = &mshc_0;
  46                 mshc2 = &mshc_2;
  47         };
  48
  49         chosen {
  50                 stdout-path = &serial_1;
  51         };
  52
  53         memory@20000000 {
  54                 device_type = "memory";
  55                 reg = <0x0 0x20000000 0x0 0xc0000000>;
  56         };
  57
  58         gpio-keys {
  59                 compatible = "gpio-keys";
  60
  61                 power-key {
  62                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_POWER>;
  64                         label = "power key";
  65                         debounce-interval = <10>;
  66                 };
  67
  68                 volume-up-key {
  69                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_VOLUMEUP>;
  71                         label = "volume-up key";
  72                         debounce-interval = <10>;
  73                 };
  74
  75                 volume-down-key {
  76                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_VOLUMEDOWN>;
  78                         label = "volume-down key";
  79                         debounce-interval = <10>;
  80                 };
  81
  82                 homepage-key {
  83                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
  84                         linux,code = <KEY_MENU>;
  85                         label = "homepage key";
  86                         debounce-interval = <10>;
  87                 };
  88         };
  89
  90         i2c_max98504: i2c-gpio-0 {
  91                 compatible = "i2c-gpio";
  92                 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
  93                          &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
  94                 i2c-gpio,delay-us = <2>;
  95                 #address-cells = <1>;
  96                 #size-cells = <0>;
  97                 status = "okay";
  98
  99                 max98504: max98504@31 {
 100                         compatible = "maxim,max98504";
 101                         reg = <0x31>;
 102                         maxim,rx-path = <1>;
 103                         maxim,tx-path = <1>;
 104                         maxim,tx-channel-mask = <3>;
 105                         maxim,tx-channel-source = <2>;
 106                 };
 107         };
 108
 109         irda_regulator: irda-regulator {
 110                 compatible = "regulator-fixed";
 111                 enable-active-high;
 112                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
 113                 regulator-name = "irda_regulator";
 114         };
 115
 116         sound {
 117                 compatible = "samsung,tm2-audio";
 118                 audio-codec = <&wm5110>;
 119                 i2s-controller = <&i2s0>;
 120                 audio-amplifier = <&max98504>;
 121                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 122                 model = "wm5110";
 123                 samsung,audio-routing =
 124                         /* Headphone */
 125                         "HP", "HPOUT1L",
 126                         "HP", "HPOUT1R",
 127
 128                         /* Speaker */
 129                         "SPK", "SPKOUT",
 130                         "SPKOUT", "HPOUT2L",
 131                         "SPKOUT", "HPOUT2R",
 132
 133                         /* Receiver */
 134                         "RCV", "HPOUT3L",
 135                         "RCV", "HPOUT3R";
 136                 status = "okay";
 137         };
 138 };
 139
 140 &adc {
 141         vdd-supply = <&ldo3_reg>;
 142         status = "okay";
 143
 144         thermistor-ap {
 145                 compatible = "murata,ncp03wf104";
 146                 pullup-uv = <1800000>;
 147                 pullup-ohm = <100000>;
 148                 pulldown-ohm = <0>;
 149                 io-channels = <&adc 0>;
 150         };
 151
 152         thermistor-battery {
 153                 compatible = "murata,ncp03wf104";
 154                 pullup-uv = <1800000>;
 155                 pullup-ohm = <100000>;
 156                 pulldown-ohm = <0>;
 157                 io-channels = <&adc 1>;
 158                 #thermal-sensor-cells = <0>;
 159         };
 160
 161         thermistor-charger {
 162                 compatible = "murata,ncp03wf104";
 163                 pullup-uv = <1800000>;
 164                 pullup-ohm = <100000>;
 165                 pulldown-ohm = <0>;
 166                 io-channels = <&adc 2>;
 167         };
 168 };
 169
 170 &bus_g2d_400 {
 171         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
 172         vdd-supply = <&buck4_reg>;
 173         exynos,saturation-ratio = <10>;
 174         status = "okay";
 175 };
 176
 177 &bus_g2d_266 {
 178         devfreq = <&bus_g2d_400>;
 179         status = "okay";
 180 };
 181
 182 &bus_gscl {
 183         devfreq = <&bus_g2d_400>;
 184         status = "okay";
 185 };
 186
 187 &bus_hevc {
 188         devfreq = <&bus_g2d_400>;
 189         status = "okay";
 190 };
 191
 192 &bus_jpeg {
 193         devfreq = <&bus_g2d_400>;
 194         status = "okay";
 195 };
 196
 197 &bus_mfc {
 198         devfreq = <&bus_g2d_400>;
 199         status = "okay";
 200 };
 201
 202 &bus_mscl {
 203         devfreq = <&bus_g2d_400>;
 204         status = "okay";
 205 };
 206
 207 &bus_noc0 {
 208         devfreq = <&bus_g2d_400>;
 209         status = "okay";
 210 };
 211
 212 &bus_noc1 {
 213         devfreq = <&bus_g2d_400>;
 214         status = "okay";
 215 };
 216
 217 &bus_noc2 {
 218         devfreq = <&bus_g2d_400>;
 219         status = "okay";
 220 };
 221
 222 &cmu_aud {
 223         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
 224         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
 225 };
 226
 227 &cmu_fsys {
 228         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 229                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
 230                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
 231                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
 232                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
 233                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
 234                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
 235                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
 236                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
 237                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
 238         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 239                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 240                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
 241                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
 242                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
 243                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
 244                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
 245                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 246         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 247                                <66700000>, <66700000>;
 248 };
 249
 250 &cmu_gscl {
 251         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
 252                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
 253         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
 254                                  <&cmu_top CLK_ACLK_GSCL_333>;
 255 };
 256
 257 &cmu_mfc {
 258         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
 259         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
 260 };
 261
 262 &cmu_mscl {
 263         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
 264                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 265                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
 266                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
 267         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
 268                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
 269                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 270                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 271 };
 272
 273 &cpu0 {
 274         cpu-supply = <&buck3_reg>;
 275 };
 276
 277 &cpu4 {
 278         cpu-supply = <&buck2_reg>;
 279 };
 280
 281 &decon {
 282         status = "okay";
 283 };
 284
 285 &decon_tv {
 286         status = "okay";
 287
 288         ports {
 289                 #address-cells = <1>;
 290                 #size-cells = <0>;
 291
 292                 port@0 {
 293                         reg = <0>;
 294                         tv_to_hdmi: endpoint {
 295                                 remote-endpoint = <&hdmi_to_tv>;
 296                         };
 297                 };
 298         };
 299 };
 300
 301 &dsi {
 302         status = "okay";
 303         vddcore-supply = <&ldo6_reg>;
 304         vddio-supply = <&ldo7_reg>;
 305         samsung,burst-clock-frequency = <512000000>;
 306         samsung,esc-clock-frequency = <16000000>;
 307         samsung,pll-clock-frequency = <24000000>;
 308         pinctrl-names = "default";
 309         pinctrl-0 = <&te_irq>;
 310
 311         ports {
 312                 #address-cells = <1>;
 313                 #size-cells = <0>;
 314
 315                 port@1 {
 316                         reg = <1>;
 317
 318                         dsi_out: endpoint {
 319                                 samsung,burst-clock-frequency = <512000000>;
 320                                 samsung,esc-clock-frequency = <16000000>;
 321                         };
 322                 };
 323         };
 324 };
 325
 326 &hdmi {
 327         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 328         status = "okay";
 329         vdd-supply = <&ldo6_reg>;
 330         vdd_osc-supply = <&ldo7_reg>;
 331         vdd_pll-supply = <&ldo6_reg>;
 332
 333         ports {
 334                 #address-cells = <1>;
 335                 #size-cells = <0>;
 336
 337                 port@0 {
 338                         reg = <0>;
 339                         hdmi_to_tv: endpoint {
 340                                 remote-endpoint = <&tv_to_hdmi>;
 341                         };
 342                 };
 343
 344                 port@1 {
 345                         reg = <1>;
 346                         hdmi_to_mhl: endpoint {
 347                                 remote-endpoint = <&mhl_to_hdmi>;
 348                         };
 349                 };
 350         };
 351 };
 352
 353 &hsi2c_0 {
 354         status = "okay";
 355         clock-frequency = <2500000>;
 356
 357         s2mps13-pmic@66 {
 358                 compatible = "samsung,s2mps13-pmic";
 359                 interrupt-parent = <&gpa0>;
 360                 interrupts = <7 IRQ_TYPE_NONE>;
 361                 reg = <0x66>;
 362                 samsung,s2mps11-wrstbi-ground;
 363
 364                 s2mps13_osc: clocks {
 365                         compatible = "samsung,s2mps13-clk";
 366                         #clock-cells = <1>;
 367                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
 368                                 "s2mps13_bt";
 369                 };
 370
 371                 regulators {
 372                         ldo1_reg: LDO1 {
 373                                 regulator-name = "VDD_ALIVE_0.9V_AP";
 374                                 regulator-min-microvolt = <900000>;
 375                                 regulator-max-microvolt = <900000>;
 376                                 regulator-always-on;
 377                         };
 378
 379                         ldo2_reg: LDO2 {
 380                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
 381                                 regulator-min-microvolt = <2800000>;
 382                                 regulator-max-microvolt = <2800000>;
 383                                 regulator-always-on;
 384                                 regulator-state-mem {
 385                                         regulator-off-in-suspend;
 386                                 };
 387                         };
 388
 389                         ldo3_reg: LDO3 {
 390                                 regulator-name = "VDD1_E_1.8V_AP";
 391                                 regulator-min-microvolt = <1800000>;
 392                                 regulator-max-microvolt = <1800000>;
 393                                 regulator-always-on;
 394                         };
 395
 396                         ldo4_reg: LDO4 {
 397                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
 398                                 regulator-min-microvolt = <1300000>;
 399                                 regulator-max-microvolt = <1300000>;
 400                                 regulator-always-on;
 401                                 regulator-state-mem {
 402                                         regulator-off-in-suspend;
 403                                 };
 404                         };
 405
 406                         ldo5_reg: LDO5 {
 407                                 regulator-name = "VDD10_DPLL_1.0V_AP";
 408                                 regulator-min-microvolt = <1000000>;
 409                                 regulator-max-microvolt = <1000000>;
 410                                 regulator-always-on;
 411                                 regulator-state-mem {
 412                                         regulator-off-in-suspend;
 413                                 };
 414                         };
 415
 416                         ldo6_reg: LDO6 {
 417                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
 418                                 regulator-min-microvolt = <1000000>;
 419                                 regulator-max-microvolt = <1000000>;
 420                                 regulator-state-mem {
 421                                         regulator-off-in-suspend;
 422                                 };
 423                         };
 424
 425                         ldo7_reg: LDO7 {
 426                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
 427                                 regulator-min-microvolt = <1800000>;
 428                                 regulator-max-microvolt = <1800000>;
 429                                 regulator-always-on;
 430                                 regulator-state-mem {
 431                                         regulator-off-in-suspend;
 432                                 };
 433                         };
 434
 435                         ldo8_reg: LDO8 {
 436                                 regulator-name = "VDD18_LLI_1.8V_AP";
 437                                 regulator-min-microvolt = <1800000>;
 438                                 regulator-max-microvolt = <1800000>;
 439                                 regulator-always-on;
 440                                 regulator-state-mem {
 441                                         regulator-off-in-suspend;
 442                                 };
 443                         };
 444
 445                         ldo9_reg: LDO9 {
 446                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
 447                                 regulator-min-microvolt = <1800000>;
 448                                 regulator-max-microvolt = <1800000>;
 449                                 regulator-always-on;
 450                                 regulator-state-mem {
 451                                         regulator-off-in-suspend;
 452                                 };
 453                         };
 454
 455                         ldo10_reg: LDO10 {
 456                                 regulator-name = "VDD33_USB30_3.0V_AP";
 457                                 regulator-min-microvolt = <3000000>;
 458                                 regulator-max-microvolt = <3000000>;
 459                                 regulator-state-mem {
 460                                         regulator-off-in-suspend;
 461                                 };
 462                         };
 463
 464                         ldo11_reg: LDO11 {
 465                                 regulator-name = "VDD_INT_M_1.0V_AP";
 466                                 regulator-min-microvolt = <1000000>;
 467                                 regulator-max-microvolt = <1000000>;
 468                                 regulator-always-on;
 469                                 regulator-state-mem {
 470                                         regulator-off-in-suspend;
 471                                 };
 472                         };
 473
 474                         ldo12_reg: LDO12 {
 475                                 regulator-name = "VDD_KFC_M_1.1V_AP";
 476                                 regulator-min-microvolt = <800000>;
 477                                 regulator-max-microvolt = <1350000>;
 478                                 regulator-always-on;
 479                         };
 480
 481                         ldo13_reg: LDO13 {
 482                                 regulator-name = "VDD_G3D_M_0.95V_AP";
 483                                 regulator-min-microvolt = <950000>;
 484                                 regulator-max-microvolt = <950000>;
 485                                 regulator-always-on;
 486                                 regulator-state-mem {
 487                                         regulator-off-in-suspend;
 488                                 };
 489                         };
 490
 491                         ldo14_reg: LDO14 {
 492                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
 493                                 regulator-min-microvolt = <1200000>;
 494                                 regulator-max-microvolt = <1200000>;
 495                                 regulator-always-on;
 496                                 regulator-state-mem {
 497                                         regulator-off-in-suspend;
 498                                 };
 499                         };
 500
 501                         ldo15_reg: LDO15 {
 502                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
 503                                 regulator-min-microvolt = <1200000>;
 504                                 regulator-max-microvolt = <1200000>;
 505                                 regulator-always-on;
 506                                 regulator-state-mem {
 507                                         regulator-off-in-suspend;
 508                                 };
 509                         };
 510
 511                         ldo16_reg: LDO16 {
 512                                 regulator-name = "VDDQ_EFUSE";
 513                                 regulator-min-microvolt = <1400000>;
 514                                 regulator-max-microvolt = <3400000>;
 515                                 regulator-always-on;
 516                         };
 517
 518                         ldo17_reg: LDO17 {
 519                                 regulator-name = "V_TFLASH_2.8V_AP";
 520                                 regulator-min-microvolt = <2800000>;
 521                                 regulator-max-microvolt = <2800000>;
 522                         };
 523
 524                         ldo18_reg: LDO18 {
 525                                 regulator-name = "V_CODEC_1.8V_AP";
 526                                 regulator-min-microvolt = <1800000>;
 527                                 regulator-max-microvolt = <1800000>;
 528                         };
 529
 530                         ldo19_reg: LDO19 {
 531                                 regulator-name = "VDDA_1.8V_COMP";
 532                                 regulator-min-microvolt = <1800000>;
 533                                 regulator-max-microvolt = <1800000>;
 534                                 regulator-always-on;
 535                         };
 536
 537                         ldo20_reg: LDO20 {
 538                                 regulator-name = "VCC_2.8V_AP";
 539                                 regulator-min-microvolt = <2800000>;
 540                                 regulator-max-microvolt = <2800000>;
 541                                 regulator-always-on;
 542                         };
 543
 544                         ldo21_reg: LDO21 {
 545                                 regulator-name = "VT_CAM_1.8V";
 546                                 regulator-min-microvolt = <1800000>;
 547                                 regulator-max-microvolt = <1800000>;
 548                         };
 549
 550                         ldo22_reg: LDO22 {
 551                                 regulator-name = "CAM_IO_1.8V_AP";
 552                                 regulator-min-microvolt = <1800000>;
 553                                 regulator-max-microvolt = <1800000>;
 554                         };
 555
 556                         ldo23_reg: LDO23 {
 557                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
 558                                 regulator-min-microvolt = <1050000>;
 559                                 regulator-max-microvolt = <1050000>;
 560                         };
 561
 562                         ldo24_reg: LDO24 {
 563                                 regulator-name = "VT_CAM_1.2V";
 564                                 regulator-min-microvolt = <1200000>;
 565                                 regulator-max-microvolt = <1200000>;
 566                         };
 567
 568                         ldo25_reg: LDO25 {
 569                                 regulator-name = "UNUSED_LDO25";
 570                                 regulator-min-microvolt = <2800000>;
 571                                 regulator-max-microvolt = <2800000>;
 572                         };
 573
 574                         ldo26_reg: LDO26 {
 575                                 regulator-name = "CAM_AF_2.8V_AP";
 576                                 regulator-min-microvolt = <2800000>;
 577                                 regulator-max-microvolt = <2800000>;
 578                         };
 579
 580                         ldo27_reg: LDO27 {
 581                                 regulator-name = "VCC_3.0V_LCD_AP";
 582                                 regulator-min-microvolt = <3000000>;
 583                                 regulator-max-microvolt = <3000000>;
 584                         };
 585
 586                         ldo28_reg: LDO28 {
 587                                 regulator-name = "VCC_1.8V_LCD_AP";
 588                                 regulator-min-microvolt = <1800000>;
 589                                 regulator-max-microvolt = <1800000>;
 590                         };
 591
 592                         ldo29_reg: LDO29 {
 593                                 regulator-name = "VT_CAM_2.8V";
 594                                 regulator-min-microvolt = <3000000>;
 595                                 regulator-max-microvolt = <3000000>;
 596                         };
 597
 598                         ldo30_reg: LDO30 {
 599                                 regulator-name = "TSP_AVDD_3.3V_AP";
 600                                 regulator-min-microvolt = <3300000>;
 601                                 regulator-max-microvolt = <3300000>;
 602                         };
 603
 604                         ldo31_reg: LDO31 {
 605                                 /*
 606                                  * LDO31 differs from target to target,
 607                                  * its definition is in the .dts
 608                                  */
 609                         };
 610
 611                         ldo32_reg: LDO32 {
 612                                 regulator-name = "VTOUCH_1.8V_AP";
 613                                 regulator-min-microvolt = <1800000>;
 614                                 regulator-max-microvolt = <1800000>;
 615                         };
 616
 617                         ldo33_reg: LDO33 {
 618                                 regulator-name = "VTOUCH_LED_3.3V";
 619                                 regulator-min-microvolt = <2500000>;
 620                                 regulator-max-microvolt = <3300000>;
 621                                 regulator-ramp-delay = <12500>;
 622                         };
 623
 624                         ldo34_reg: LDO34 {
 625                                 regulator-name = "VCC_1.8V_MHL_AP";
 626                                 regulator-min-microvolt = <1000000>;
 627                                 regulator-max-microvolt = <2100000>;
 628                         };
 629
 630                         ldo35_reg: LDO35 {
 631                                 regulator-name = "OIS_VM_2.8V";
 632                                 regulator-min-microvolt = <1800000>;
 633                                 regulator-max-microvolt = <2800000>;
 634                         };
 635
 636                         ldo36_reg: LDO36 {
 637                                 regulator-name = "VSIL_1.0V";
 638                                 regulator-min-microvolt = <1000000>;
 639                                 regulator-max-microvolt = <1000000>;
 640                         };
 641
 642                         ldo37_reg: LDO37 {
 643                                 regulator-name = "VF_1.8V";
 644                                 regulator-min-microvolt = <1800000>;
 645                                 regulator-max-microvolt = <1800000>;
 646                         };
 647
 648                         ldo38_reg: LDO38 {
 649                                 /*
 650                                  * LDO38 differs from target to target,
 651                                  * its definition is in the .dts
 652                                  */
 653                         };
 654
 655                         ldo39_reg: LDO39 {
 656                                 regulator-name = "V_HRM_1.8V";
 657                                 regulator-min-microvolt = <1800000>;
 658                                 regulator-max-microvolt = <1800000>;
 659                         };
 660
 661                         ldo40_reg: LDO40 {
 662                                 regulator-name = "V_HRM_3.3V";
 663                                 regulator-min-microvolt = <3300000>;
 664                                 regulator-max-microvolt = <3300000>;
 665                         };
 666
 667                         buck1_reg: BUCK1 {
 668                                 regulator-name = "VDD_MIF_0.9V_AP";
 669                                 regulator-min-microvolt = <600000>;
 670                                 regulator-max-microvolt = <1500000>;
 671                                 regulator-always-on;
 672                                 regulator-state-mem {
 673                                         regulator-off-in-suspend;
 674                                 };
 675                         };
 676
 677                         buck2_reg: BUCK2 {
 678                                 regulator-name = "VDD_EGL_1.0V_AP";
 679                                 regulator-min-microvolt = <900000>;
 680                                 regulator-max-microvolt = <1300000>;
 681                                 regulator-always-on;
 682                                 regulator-state-mem {
 683                                         regulator-off-in-suspend;
 684                                 };
 685                         };
 686
 687                         buck3_reg: BUCK3 {
 688                                 regulator-name = "VDD_KFC_1.0V_AP";
 689                                 regulator-min-microvolt = <800000>;
 690                                 regulator-max-microvolt = <1200000>;
 691                                 regulator-always-on;
 692                                 regulator-state-mem {
 693                                         regulator-off-in-suspend;
 694                                 };
 695                         };
 696
 697                         buck4_reg: BUCK4 {
 698                                 regulator-name = "VDD_INT_0.95V_AP";
 699                                 regulator-min-microvolt = <600000>;
 700                                 regulator-max-microvolt = <1500000>;
 701                                 regulator-always-on;
 702                                 regulator-state-mem {
 703                                         regulator-off-in-suspend;
 704                                 };
 705                         };
 706
 707                         buck5_reg: BUCK5 {
 708                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
 709                                 regulator-min-microvolt = <600000>;
 710                                 regulator-max-microvolt = <1500000>;
 711                                 regulator-always-on;
 712                                 regulator-state-mem {
 713                                         regulator-off-in-suspend;
 714                                 };
 715                         };
 716
 717                         buck6_reg: BUCK6 {
 718                                 regulator-name = "VDD_G3D_0.9V_AP";
 719                                 regulator-min-microvolt = <600000>;
 720                                 regulator-max-microvolt = <1500000>;
 721                                 regulator-always-on;
 722                                 regulator-state-mem {
 723                                         regulator-off-in-suspend;
 724                                 };
 725                         };
 726
 727                         buck7_reg: BUCK7 {
 728                                 regulator-name = "VDD_MEM1_1.2V_AP";
 729                                 regulator-min-microvolt = <1200000>;
 730                                 regulator-max-microvolt = <1200000>;
 731                                 regulator-always-on;
 732                         };
 733
 734                         buck8_reg: BUCK8 {
 735                                 regulator-name = "VDD_LLDO_1.35V_AP";
 736                                 regulator-min-microvolt = <1350000>;
 737                                 regulator-max-microvolt = <3300000>;
 738                                 regulator-always-on;
 739                         };
 740
 741                         buck9_reg: BUCK9 {
 742                                 regulator-name = "VDD_MLDO_2.0V_AP";
 743                                 regulator-min-microvolt = <1350000>;
 744                                 regulator-max-microvolt = <3300000>;
 745                                 regulator-always-on;
 746                         };
 747
 748                         buck10_reg: BUCK10 {
 749                                 regulator-name = "vdd_mem2";
 750                                 regulator-min-microvolt = <550000>;
 751                                 regulator-max-microvolt = <1500000>;
 752                                 regulator-always-on;
 753                         };
 754                 };
 755         };
 756 };
 757
 758 &hsi2c_5 {
 759         status = "okay";
 760
 761         stmfts: touchscreen@49 {
 762                 compatible = "st,stmfts";
 763                 reg = <0x49>;
 764                 interrupt-parent = <&gpa1>;
 765                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 766                 avdd-supply = <&ldo30_reg>;
 767                 vdd-supply = <&ldo31_reg>;
 768         };
 769 };
 770
 771 &hsi2c_7 {
 772         status = "okay";
 773
 774         sii8620@39 {
 775                 reg = <0x39>;
 776                 compatible = "sil,sii8620";
 777                 cvcc10-supply = <&ldo36_reg>;
 778                 iovcc18-supply = <&ldo34_reg>;
 779                 interrupt-parent = <&gpf0>;
 780                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 781                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
 782                 clocks = <&pmu_system_controller 0>;
 783                 clock-names = "xtal";
 784
 785                 port {
 786                         mhl_to_hdmi: endpoint {
 787                                 remote-endpoint = <&hdmi_to_mhl>;
 788                         };
 789                 };
 790         };
 791 };
 792
 793 &hsi2c_8 {
 794         status = "okay";
 795
 796         max77843@66 {
 797                 compatible = "maxim,max77843";
 798                 interrupt-parent = <&gpa1>;
 799                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 800                 reg = <0x66>;
 801
 802                 muic: max77843-muic {
 803                         compatible = "maxim,max77843-muic";
 804                 };
 805
 806                 regulators {
 807                         compatible = "maxim,max77843-regulator";
 808                         safeout1_reg: SAFEOUT1 {
 809                                 regulator-name = "SAFEOUT1";
 810                                 regulator-min-microvolt = <3300000>;
 811                                 regulator-max-microvolt = <4950000>;
 812                         };
 813
 814                         safeout2_reg: SAFEOUT2 {
 815                                 regulator-name = "SAFEOUT2";
 816                                 regulator-min-microvolt = <3300000>;
 817                                 regulator-max-microvolt = <4950000>;
 818                         };
 819
 820                         charger_reg: CHARGER {
 821                                 regulator-name = "CHARGER";
 822                                 regulator-min-microamp = <100000>;
 823                                 regulator-max-microamp = <3150000>;
 824                         };
 825                 };
 826
 827                 haptic: max77843-haptic {
 828                         compatible = "maxim,max77843-haptic";
 829                         haptic-supply = <&ldo38_reg>;
 830                         pwms = <&pwm 0 33670 0>;
 831                         pwm-names = "haptic";
 832                 };
 833         };
 834 };
 835
 836 &hsi2c_11 {
 837         status = "okay";
 838 };
 839
 840 &i2s0 {
 841         status = "okay";
 842 };
 843
 844 &mshc_0 {
 845         status = "okay";
 846         num-slots = <1>;
 847         mmc-hs200-1_8v;
 848         mmc-hs400-1_8v;
 849         cap-mmc-highspeed;
 850         non-removable;
 851         card-detect-delay = <200>;
 852         samsung,dw-mshc-ciu-div = <3>;
 853         samsung,dw-mshc-sdr-timing = <0 4>;
 854         samsung,dw-mshc-ddr-timing = <0 2>;
 855         samsung,dw-mshc-hs400-timing = <0 3>;
 856         samsung,read-strobe-delay = <90>;
 857         fifo-depth = <0x80>;
 858         pinctrl-names = "default";
 859         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
 860                         &sd0_bus8 &sd0_rdqs>;
 861         bus-width = <8>;
 862         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
 863         assigned-clock-rates = <800000000>;
 864 };
 865
 866 &mshc_2 {
 867         status = "okay";
 868         num-slots = <1>;
 869         cap-sd-highspeed;
 870         disable-wp;
 871         cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
 872         cd-inverted;
 873         card-detect-delay = <200>;
 874         samsung,dw-mshc-ciu-div = <3>;
 875         samsung,dw-mshc-sdr-timing = <0 4>;
 876         samsung,dw-mshc-ddr-timing = <0 2>;
 877         fifo-depth = <0x80>;
 878         pinctrl-names = "default";
 879         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
 880         bus-width = <4>;
 881 };
 882
 883 &ppmu_d0_general {
 884         status = "okay";
 885         events {
 886                 ppmu_event0_d0_general: ppmu-event0-d0-general {
 887                         event-name = "ppmu-event0-d0-general";
 888                 };
 889         };
 890 };
 891
 892 &ppmu_d1_general {
 893         status = "okay";
 894         events {
 895                 ppmu_event0_d1_general: ppmu-event0-d1-general {
 896                        event-name = "ppmu-event0-d1-general";
 897                };
 898        };
 899 };
 900
 901 &pinctrl_alive {
 902         pinctrl-names = "default";
 903         pinctrl-0 = <&initial_alive>;
 904
 905         initial_alive: initial-state {
 906                 PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
 907                 PIN(INPUT, gpa0-1, NONE, FAST_SR1);
 908                 PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
 909                 PIN(INPUT, gpa0-3, NONE, FAST_SR1);
 910                 PIN(INPUT, gpa0-4, NONE, FAST_SR1);
 911                 PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
 912                 PIN(INPUT, gpa0-6, NONE, FAST_SR1);
 913                 PIN(INPUT, gpa0-7, NONE, FAST_SR1);
 914
 915                 PIN(INPUT, gpa1-0, UP, FAST_SR1);
 916                 PIN(INPUT, gpa1-1, UP, FAST_SR1);
 917                 PIN(INPUT, gpa1-2, NONE, FAST_SR1);
 918                 PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
 919                 PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
 920                 PIN(INPUT, gpa1-5, NONE, FAST_SR1);
 921                 PIN(INPUT, gpa1-6, NONE, FAST_SR1);
 922                 PIN(INPUT, gpa1-7, NONE, FAST_SR1);
 923
 924                 PIN(INPUT, gpa2-0, NONE, FAST_SR1);
 925                 PIN(INPUT, gpa2-1, NONE, FAST_SR1);
 926                 PIN(INPUT, gpa2-2, NONE, FAST_SR1);
 927                 PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
 928                 PIN(INPUT, gpa2-4, NONE, FAST_SR1);
 929                 PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
 930                 PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
 931                 PIN(INPUT, gpa2-7, NONE, FAST_SR1);
 932
 933                 PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
 934                 PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
 935                 PIN(INPUT, gpa3-2, NONE, FAST_SR1);
 936                 PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
 937                 PIN(INPUT, gpa3-4, NONE, FAST_SR1);
 938                 PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
 939                 PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
 940                 PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
 941
 942                 PIN(INPUT, gpf1-0, NONE, FAST_SR1);
 943                 PIN(INPUT, gpf1-1, NONE, FAST_SR1);
 944                 PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
 945                 PIN(INPUT, gpf1-4, UP, FAST_SR1);
 946                 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
 947                 PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
 948                 PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
 949
 950                 PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
 951                 PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
 952                 PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
 953                 PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
 954
 955                 PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
 956                 PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
 957                 PIN(INPUT, gpf3-2, NONE, FAST_SR1);
 958                 PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
 959
 960                 PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
 961                 PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
 962                 PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
 963                 PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
 964                 PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
 965                 PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
 966                 PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
 967                 PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
 968
 969                 PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
 970                 PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
 971                 PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
 972                 PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
 973                 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
 974                 PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
 975                 PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
 976                 PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
 977         };
 978
 979         te_irq: te_irq {
 980                 samsung,pins = "gpf1-3";
 981                 samsung,pin-function = <0xf>;
 982         };
 983 };
 984
 985 &pinctrl_cpif {
 986         pinctrl-names = "default";
 987         pinctrl-0 = <&initial_cpif>;
 988
 989         initial_cpif: initial-state {
 990                 PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
 991                 PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
 992         };
 993 };
 994
 995 &pinctrl_ese {
 996         pinctrl-names = "default";
 997         pinctrl-0 = <&initial_ese>;
 998
 999         initial_ese: initial-state {
1000                 PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
1001                 PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
1002                 PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
1003         };
1004 };
1005
1006 &pinctrl_fsys {
1007         pinctrl-names = "default";
1008         pinctrl-0 = <&initial_fsys>;
1009
1010         initial_fsys: initial-state {
1011                 PIN(INPUT, gpr3-0, NONE, FAST_SR1);
1012                 PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
1013                 PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
1014                 PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
1015                 PIN(INPUT, gpr3-7, NONE, FAST_SR1);
1016         };
1017 };
1018
1019 &pinctrl_imem {
1020         pinctrl-names = "default";
1021         pinctrl-0 = <&initial_imem>;
1022
1023         initial_imem: initial-state {
1024                 PIN(INPUT, gpf0-0, UP, FAST_SR1);
1025                 PIN(INPUT, gpf0-1, UP, FAST_SR1);
1026                 PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
1027                 PIN(INPUT, gpf0-3, UP, FAST_SR1);
1028                 PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
1029                 PIN(INPUT, gpf0-5, NONE, FAST_SR1);
1030                 PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
1031                 PIN(INPUT, gpf0-7, UP, FAST_SR1);
1032         };
1033 };
1034
1035 &pinctrl_nfc {
1036         pinctrl-names = "default";
1037         pinctrl-0 = <&initial_nfc>;
1038
1039         initial_nfc: initial-state {
1040                 PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
1041         };
1042 };
1043
1044 &pinctrl_peric {
1045         pinctrl-names = "default";
1046         pinctrl-0 = <&initial_peric>;
1047
1048         initial_peric: initial-state {
1049                 PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
1050                 PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
1051                 PIN(INPUT, gpv7-2, NONE, FAST_SR1);
1052                 PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
1053                 PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
1054                 PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
1055
1056                 PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
1057
1058                 PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
1059                 PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
1060                 PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
1061
1062                 PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
1063
1064                 PIN(INPUT, gpc3-4, NONE, FAST_SR1);
1065                 PIN(INPUT, gpc3-5, NONE, FAST_SR1);
1066                 PIN(INPUT, gpc3-6, NONE, FAST_SR1);
1067                 PIN(INPUT, gpc3-7, NONE, FAST_SR1);
1068
1069                 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
1070                 PIN(2, gpg0-1, DOWN, FAST_SR1);
1071
1072                 PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
1073
1074                 PIN(INPUT, gpd4-0, NONE, FAST_SR1);
1075                 PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
1076                 PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
1077                 PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
1078                 PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
1079
1080                 PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
1081
1082                 PIN(INPUT, gpd8-1, UP, FAST_SR1);
1083
1084                 PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
1085                 PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
1086                 PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
1087                 PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
1088                 PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
1089
1090                 PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
1091                 PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
1092
1093                 PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
1094                 PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
1095                 PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
1096         };
1097 };
1098
1099 &pinctrl_touch {
1100         pinctrl-names = "default";
1101         pinctrl-0 = <&initial_touch>;
1102
1103         initial_touch: initial-state {
1104                 PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
1105         };
1106 };
1107
1108 &pwm {
1109         pinctrl-0 = <&pwm0_out>;
1110         pinctrl-names = "default";
1111         status = "okay";
1112 };
1113
1114 &mic {
1115         status = "okay";
1116 };
1117
1118 &pmu_system_controller {
1119         assigned-clocks = <&pmu_system_controller 0>;
1120         assigned-clock-parents = <&xxti>;
1121 };
1122
1123 &serial_1 {
1124         status = "okay";
1125 };
1126
1127 &spi_1 {
1128         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1129         status = "okay";
1130
1131         wm5110: wm5110-codec@0 {
1132                 compatible = "wlf,wm5110";
1133                 reg = <0x0>;
1134                 spi-max-frequency = <20000000>;
1135                 interrupt-parent = <&gpa0>;
1136                 interrupts = <4 IRQ_TYPE_NONE>;
1137                 clocks = <&pmu_system_controller 0>,
1138                         <&s2mps13_osc S2MPS11_CLK_BT>;
1139                 clock-names = "mclk1", "mclk2";
1140
1141                 gpio-controller;
1142                 #gpio-cells = <2>;
1143
1144                 wlf,micd-detect-debounce = <300>;
1145                 wlf,micd-bias-start-time = <0x1>;
1146                 wlf,micd-rate = <0x7>;
1147                 wlf,micd-dbtime = <0x1>;
1148                 wlf,micd-force-micbias;
1149                 wlf,micd-configs = <0x0 1 0>;
1150                 wlf,hpdet-channel = <1>;
1151                 wlf,gpsw = <0x1>;
1152                 wlf,inmode = <2 0 2 0>;
1153
1154                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1155                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1156
1157                 /* core supplies */
1158                 AVDD-supply = <&ldo18_reg>;
1159                 DBVDD1-supply = <&ldo18_reg>;
1160                 CPVDD-supply = <&ldo18_reg>;
1161                 DBVDD2-supply = <&ldo18_reg>;
1162                 DBVDD3-supply = <&ldo18_reg>;
1163
1164                 controller-data {
1165                         samsung,spi-feedback-delay = <0>;
1166                 };
1167         };
1168 };
1169
1170 &spi_3 {
1171         status = "okay";
1172         no-cs-readback;
1173
1174         irled@0 {
1175                 compatible = "ir-spi-led";
1176                 reg = <0x0>;
1177                 spi-max-frequency = <5000000>;
1178                 power-supply = <&irda_regulator>;
1179                 duty-cycle = <60>;
1180                 led-active-low;
1181
1182                 controller-data {
1183                         samsung,spi-feedback-delay = <0>;
1184                 };
1185         };
1186 };
1187
1188 &timer {
1189         clock-frequency = <24000000>;
1190 };
1191
1192 &tmu_atlas0 {
1193         vtmu-supply = <&ldo3_reg>;
1194         status = "okay";
1195 };
1196
1197 &tmu_apollo {
1198         vtmu-supply = <&ldo3_reg>;
1199         status = "okay";
1200 };
1201
1202 &tmu_g3d {
1203         vtmu-supply = <&ldo3_reg>;
1204         status = "okay";
1205 };
1206
1207 &usbdrd30 {
1208         vdd33-supply = <&ldo10_reg>;
1209         vdd10-supply = <&ldo6_reg>;
1210         status = "okay";
1211 };
1212
1213 &usbdrd_dwc3_0 {
1214         dr_mode = "otg";
1215 };
1216
1217 &usbdrd30_phy {
1218         vbus-supply = <&safeout1_reg>;
1219         status = "okay";
1220 };
1221
1222 &xxti {
1223         clock-frequency = <24000000>;
1224 };