arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

   1 /*
   2  * Copyright (c) 2016 Andreas Färber
   3  * Copyright (c) 2016 BayLibre, Inc.
   4  * Author: Neil Armstrong <narmstrong@kernel.org>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This library is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This library is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 /dts-v1/;
  46
  47 #include "meson-gxbb.dtsi"
  48 #include <dt-bindings/gpio/gpio.h>
  49 #include <dt-bindings/input/input.h>
  50
  51 / {
  52         compatible = "nexbox,a95x", "amlogic,meson-gxbb";
  53         model = "NEXBOX A95X";
  54
  55         aliases {
  56                 serial0 = &uart_AO;
  57         };
  58
  59         chosen {
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@0 {
  64                 device_type = "memory";
  65                 reg = <0x0 0x0 0x0 0x40000000>;
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70                 blue {
  71                         label = "a95x:system-status";
  72                         gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "heartbeat";
  74                         default-state = "off";
  75                 };
  76         };
  77
  78         gpio-keys-polled {
  79                 compatible = "gpio-keys-polled";
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82                 poll-interval = <100>;
  83
  84                 button@0 {
  85                         label = "reset";
  86                         linux,code = <KEY_RESTART>;
  87                         gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
  88                 };
  89         };
  90
  91         usb_pwr: regulator-usb-pwrs {
  92                 compatible = "regulator-fixed";
  93
  94                 regulator-name = "USB_PWR";
  95
  96                 regulator-min-microvolt = <5000000>;
  97                 regulator-max-microvolt = <5000000>;
  98
  99                 gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
 100                 enable-active-high;
 101         };
 102
 103         vddio_card: gpio-regulator {
 104                 compatible = "regulator-gpio";
 105
 106                 regulator-name = "VDDIO_CARD";
 107                 regulator-min-microvolt = <1800000>;
 108                 regulator-max-microvolt = <3300000>;
 109
 110                 gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
 111                 gpios-states = <1>;
 112
 113                 /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
 114                 states = <1800000 0
 115                           3300000 1>;
 116         };
 117
 118         vddio_boot: regulator-vddio_boot {
 119                 compatible = "regulator-fixed";
 120                 regulator-name = "VDDIO_BOOT";
 121                 regulator-min-microvolt = <1800000>;
 122                 regulator-max-microvolt = <1800000>;
 123         };
 124
 125         vddao_3v3: regulator-vddao_3v3 {
 126                 compatible = "regulator-fixed";
 127                 regulator-name = "VDDAO_3V3";
 128                 regulator-min-microvolt = <3300000>;
 129                 regulator-max-microvolt = <3300000>;
 130         };
 131
 132         vcc_3v3: regulator-vcc_3v3 {
 133                 compatible = "regulator-fixed";
 134                 regulator-name = "VCC_3V3";
 135                 regulator-min-microvolt = <3300000>;
 136                 regulator-max-microvolt = <3300000>;
 137         };
 138
 139         emmc_pwrseq: emmc-pwrseq {
 140                 compatible = "mmc-pwrseq-emmc";
 141                 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 142         };
 143
 144         wifi32k: wifi32k {
 145                 compatible = "pwm-clock";
 146                 #clock-cells = <0>;
 147                 clock-frequency = <32768>;
 148                 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
 149         };
 150
 151         sdio_pwrseq: sdio-pwrseq {
 152                 compatible = "mmc-pwrseq-simple";
 153                 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 154                 clocks = <&wifi32k>;
 155                 clock-names = "ext_clock";
 156         };
 157
 158         cvbs-connector {
 159                 compatible = "composite-video-connector";
 160
 161                 port {
 162                         cvbs_connector_in: endpoint {
 163                                 remote-endpoint = <&cvbs_vdac_out>;
 164                         };
 165                 };
 166         };
 167
 168         hdmi-connector {
 169                 compatible = "hdmi-connector";
 170                 type = "a";
 171
 172                 port {
 173                         hdmi_connector_in: endpoint {
 174                                 remote-endpoint = <&hdmi_tx_tmds_out>;
 175                         };
 176                 };
 177         };
 178 };
 179
 180 &cvbs_vdac_port {
 181         cvbs_vdac_out: endpoint {
 182                 remote-endpoint = <&cvbs_connector_in>;
 183         };
 184 };
 185
 186 &cec_AO {
 187         status = "okay";
 188         pinctrl-0 = <&ao_cec_pins>;
 189         pinctrl-names = "default";
 190         hdmi-phandle = <&hdmi_tx>;
 191 };
 192
 193 &ethmac {
 194         status = "okay";
 195         pinctrl-0 = <&eth_rmii_pins>;
 196         pinctrl-names = "default";
 197
 198         phy-handle = <&eth_phy0>;
 199         phy-mode = "rmii";
 200
 201         snps,reset-gpio = <&gpio GPIOZ_14 0>;
 202         snps,reset-delays-us = <0 10000 1000000>;
 203         snps,reset-active-low;
 204
 205         mdio {
 206                 compatible = "snps,dwmac-mdio";
 207                 #address-cells = <1>;
 208                 #size-cells = <0>;
 209
 210                 eth_phy0: ethernet-phy@0 {
 211                         /* IC Plus IP101GR (0x02430c54) */
 212                         reg = <0>;
 213                 };
 214         };
 215 };
 216
 217 &hdmi_tx {
 218         status = "okay";
 219         pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 220         pinctrl-names = "default";
 221 };
 222
 223 &hdmi_tx_tmds_port {
 224         hdmi_tx_tmds_out: endpoint {
 225                 remote-endpoint = <&hdmi_connector_in>;
 226         };
 227 };
 228
 229 &ir {
 230         status = "okay";
 231         pinctrl-0 = <&remote_input_ao_pins>;
 232         pinctrl-names = "default";
 233 };
 234
 235 &pwm_ef {
 236         status = "okay";
 237         pinctrl-0 = <&pwm_e_pins>;
 238         pinctrl-names = "default";
 239         clocks = <&clkc CLKID_FCLK_DIV4>;
 240         clock-names = "clkin0";
 241 };
 242
 243 /* Wireless SDIO Module */
 244 &sd_emmc_a {
 245         status = "okay";
 246         pinctrl-0 = <&sdio_pins>;
 247         pinctrl-1 = <&sdio_clk_gate_pins>;
 248         pinctrl-names = "default", "clk-gate";
 249         #address-cells = <1>;
 250         #size-cells = <0>;
 251
 252         bus-width = <4>;
 253         cap-sd-highspeed;
 254         max-frequency = <100000000>;
 255
 256         non-removable;
 257         disable-wp;
 258
 259         mmc-pwrseq = <&sdio_pwrseq>;
 260
 261         vmmc-supply = <&vddao_3v3>;
 262         vqmmc-supply = <&vddio_boot>;
 263 };
 264
 265 /* SD card */
 266 &sd_emmc_b {
 267         status = "okay";
 268         pinctrl-0 = <&sdcard_pins>;
 269         pinctrl-1 = <&sdcard_clk_gate_pins>;
 270         pinctrl-names = "default", "clk-gate";
 271
 272         bus-width = <4>;
 273         cap-sd-highspeed;
 274         max-frequency = <100000000>;
 275         disable-wp;
 276
 277         cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
 278         cd-inverted;
 279
 280         vmmc-supply = <&vddao_3v3>;
 281         vqmmc-supply = <&vddio_card>;
 282 };
 283
 284 /* eMMC */
 285 &sd_emmc_c {
 286         status = "okay";
 287         pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
 288         pinctrl-1 = <&emmc_clk_gate_pins>;
 289         pinctrl-names = "default", "clk-gate";
 290
 291         bus-width = <8>;
 292         cap-mmc-highspeed;
 293         max-frequency = <200000000>;
 294         non-removable;
 295         disable-wp;
 296         mmc-ddr-1_8v;
 297         mmc-hs200-1_8v;
 298
 299         mmc-pwrseq = <&emmc_pwrseq>;
 300         vmmc-supply = <&vcc_3v3>;
 301         vqmmc-supply = <&vddio_boot>;
 302 };
 303
 304 &uart_AO {
 305         status = "okay";
 306         pinctrl-0 = <&uart_ao_a_pins>;
 307         pinctrl-names = "default";
 308 };
 309
 310 &usb0_phy {
 311         status = "okay";
 312         phy-supply = <&usb_pwr>;
 313 };
 314
 315 &usb1_phy {
 316         status = "okay";
 317 };
 318
 319 &usb0 {
 320         status = "okay";
 321 };
 322
 323 &usb1 {
 324         status = "okay";
 325 };