arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ or MIT)
   2 /*
   3  * Copyright (C) 2018 Amarula Solutions
   4  * Author: Jagan Teki <jagan@amarulasolutions.com>
   5  */
   6
   7 /dts-v1/;
   8
   9 #include "sun50i-h6.dtsi"
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12
  13 / {
  14         model = "OrangePi One Plus";
  15         compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
  16
  17         aliases {
  18                 serial0 = &uart0;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0:115200n8";
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 power {
  29                         label = "orangepi:red:power";
  30                         gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
  31                         default-state = "on";
  32                 };
  33
  34                 status {
  35                         label = "orangepi:green:status";
  36                         gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
  37                 };
  38         };
  39
  40         reg_vcc5v: vcc5v {
  41                 /* board wide 5V supply directly from the DC jack */
  42                 compatible = "regulator-fixed";
  43                 regulator-name = "vcc-5v";
  44                 regulator-min-microvolt = <5000000>;
  45                 regulator-max-microvolt = <5000000>;
  46                 regulator-always-on;
  47         };
  48 };
  49
  50 &ehci0 {
  51         status = "okay";
  52 };
  53
  54 &ehci3 {
  55         status = "okay";
  56 };
  57
  58 &mmc0 {
  59         pinctrl-names = "default";
  60         pinctrl-0 = <&mmc0_pins>;
  61         vmmc-supply = <&reg_cldo1>;
  62         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
  63         bus-width = <4>;
  64         status = "okay";
  65 };
  66
  67 &ohci0 {
  68         status = "okay";
  69 };
  70
  71 &ohci3 {
  72         status = "okay";
  73 };
  74
  75 &r_i2c {
  76         status = "okay";
  77
  78         axp805: pmic@36 {
  79                 compatible = "x-powers,axp805", "x-powers,axp806";
  80                 reg = <0x36>;
  81                 interrupt-parent = <&r_intc>;
  82                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  83                 interrupt-controller;
  84                 #interrupt-cells = <1>;
  85                 x-powers,self-working-mode;
  86                 vina-supply = <&reg_vcc5v>;
  87                 vinb-supply = <&reg_vcc5v>;
  88                 vinc-supply = <&reg_vcc5v>;
  89                 vind-supply = <&reg_vcc5v>;
  90                 vine-supply = <&reg_vcc5v>;
  91                 aldoin-supply = <&reg_vcc5v>;
  92                 bldoin-supply = <&reg_vcc5v>;
  93                 cldoin-supply = <&reg_vcc5v>;
  94
  95                 regulators {
  96                         reg_aldo1: aldo1 {
  97                                 regulator-always-on;
  98                                 regulator-min-microvolt = <3300000>;
  99                                 regulator-max-microvolt = <3300000>;
 100                                 regulator-name = "vcc-pl";
 101                         };
 102
 103                         reg_aldo2: aldo2 {
 104                                 regulator-min-microvolt = <3300000>;
 105                                 regulator-max-microvolt = <3300000>;
 106                                 regulator-name = "vcc-ac200";
 107                         };
 108
 109                         reg_aldo3: aldo3 {
 110                                 regulator-always-on;
 111                                 regulator-min-microvolt = <3300000>;
 112                                 regulator-max-microvolt = <3300000>;
 113                                 regulator-name = "vcc25-dram";
 114                         };
 115
 116                         reg_bldo1: bldo1 {
 117                                 regulator-always-on;
 118                                 regulator-min-microvolt = <1800000>;
 119                                 regulator-max-microvolt = <1800000>;
 120                                 regulator-name = "vcc-bias-pll";
 121                         };
 122
 123                         reg_bldo2: bldo2 {
 124                                 regulator-always-on;
 125                                 regulator-min-microvolt = <1800000>;
 126                                 regulator-max-microvolt = <1800000>;
 127                                 regulator-name = "vcc-efuse-pcie-hdmi-io";
 128                         };
 129
 130                         reg_bldo3: bldo3 {
 131                                 regulator-always-on;
 132                                 regulator-min-microvolt = <1800000>;
 133                                 regulator-max-microvolt = <1800000>;
 134                                 regulator-name = "vcc-dcxoio";
 135                         };
 136
 137                         bldo4 {
 138                                 /* unused */
 139                         };
 140
 141                         reg_cldo1: cldo1 {
 142                                 regulator-always-on;
 143                                 regulator-min-microvolt = <3300000>;
 144                                 regulator-max-microvolt = <3300000>;
 145                                 regulator-name = "vcc-3v3";
 146                         };
 147
 148                         reg_cldo2: cldo2 {
 149                                 regulator-min-microvolt = <3300000>;
 150                                 regulator-max-microvolt = <3300000>;
 151                                 regulator-name = "vcc-wifi-1";
 152                         };
 153
 154                         reg_cldo3: cldo3 {
 155                                 regulator-min-microvolt = <3300000>;
 156                                 regulator-max-microvolt = <3300000>;
 157                                 regulator-name = "vcc-wifi-2";
 158                         };
 159
 160                         reg_dcdca: dcdca {
 161                                 regulator-always-on;
 162                                 regulator-min-microvolt = <810000>;
 163                                 regulator-max-microvolt = <1080000>;
 164                                 regulator-name = "vdd-cpu";
 165                         };
 166
 167                         reg_dcdcc: dcdcc {
 168                                 regulator-min-microvolt = <810000>;
 169                                 regulator-max-microvolt = <1080000>;
 170                                 regulator-name = "vdd-gpu";
 171                         };
 172
 173                         reg_dcdcd: dcdcd {
 174                                 regulator-always-on;
 175                                 regulator-min-microvolt = <960000>;
 176                                 regulator-max-microvolt = <960000>;
 177                                 regulator-name = "vdd-sys";
 178                         };
 179
 180                         reg_dcdce: dcdce {
 181                                 regulator-always-on;
 182                                 regulator-min-microvolt = <1200000>;
 183                                 regulator-max-microvolt = <1200000>;
 184                                 regulator-name = "vcc-dram";
 185                         };
 186
 187                         sw {
 188                                 /* unused */
 189                         };
 190                 };
 191         };
 192 };
 193
 194 &uart0 {
 195         pinctrl-names = "default";
 196         pinctrl-0 = <&uart0_ph_pins>;
 197         status = "okay";
 198 };
 199
 200 &usb2otg {
 201         dr_mode = "otg";
 202         status = "okay";
 203 };
 204
 205 &usb2phy {
 206         usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
 207         usb0_vbus-supply = <&reg_vcc5v>;
 208         usb3_vbus-supply = <&reg_vcc5v>;
 209         status = "okay";
 210 };