arch/arm/plat-omap/pm.c

   1 /*
   2  * linux/arch/arm/plat-omap/pm.c
   3  *
   4  * OMAP Power Management Routines
   5  *
   6  * Original code for the SA11x0:
   7  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
   8  *
   9  * Modified for the PXA250 by Nicolas Pitre:
  10  * Copyright (c) 2002 Monta Vista Software, Inc.
  11  *
  12  * Modified for the OMAP1510 by David Singleton:
  13  * Copyright (c) 2002 Monta Vista Software, Inc.
  14  *
  15  * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
  16  *
  17  * This program is free software; you can redistribute it and/or modify it
  18  * under the terms of the GNU General Public License as published by the
  19  * Free Software Foundation; either version 2 of the License, or (at your
  20  * option) any later version.
  21  *
  22  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  25  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  *
  33  * You should have received a copy of the GNU General Public License along
  34  * with this program; if not, write to the Free Software Foundation, Inc.,
  35  * 675 Mass Ave, Cambridge, MA 02139, USA.
  36  */
  37
  38 #include <linux/pm.h>
  39 #include <linux/sched.h>
  40 #include <linux/proc_fs.h>
  41 #include <linux/pm.h>
  42
  43 #include <asm/io.h>
  44 #include <asm/mach/time.h>
  45 #include <asm/mach-types.h>
  46
  47 #include <asm/arch/omap16xx.h>
  48 #include <asm/arch/pm.h>
  49 #include <asm/arch/mux.h>
  50 #include <asm/arch/tc.h>
  51 #include <asm/arch/tps65010.h>
  52
  53 #include "clock.h"
  54
  55 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
  56 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
  57 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
  58 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
  59
  60 /*
  61  * Let's power down on idle, but only if we are really
  62  * idle, because once we start down the path of
  63  * going idle we continue to do idle even if we get
  64  * a clock tick interrupt . .
  65  */
  66 void omap_pm_idle(void)
  67 {
  68         int (*func_ptr)(void) = 0;
  69         unsigned int mask32 = 0;
  70
  71         /*
  72          * If the DSP is being used let's just idle the CPU, the overhead
  73          * to wake up from Big Sleep is big, milliseconds versus micro
  74          * seconds for wait for interrupt.
  75          */
  76
  77         local_irq_disable();
  78         local_fiq_disable();
  79         if (need_resched()) {
  80                 local_fiq_enable();
  81                 local_irq_enable();
  82                 return;
  83         }
  84         mask32 = omap_readl(ARM_SYSST);
  85
  86         /*
  87          * Since an interrupt may set up a timer, we don't want to
  88          * reprogram the hardware timer with interrupts enabled.
  89          * Re-enable interrupts only after returning from idle.
  90          */
  91         timer_dyn_reprogram();
  92
  93         if ((mask32 & DSP_IDLE) == 0) {
  94                 __asm__ volatile ("mcr  p15, 0, r0, c7, c0, 4");
  95         } else {
  96
  97                 if (cpu_is_omap1510()) {
  98                         func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND);
  99                 } else if (cpu_is_omap1610() || cpu_is_omap1710()) {
 100                         func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND);
 101                 } else if (cpu_is_omap5912()) {
 102                         func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND);
 103                 }
 104
 105                 func_ptr();
 106         }
 107         local_fiq_enable();
 108         local_irq_enable();
 109 }
 110
 111 /*
 112  * Configuration of the wakeup event is board specific. For the
 113  * moment we put it into this helper function. Later it may move
 114  * to board specific files.
 115  */
 116 static void omap_pm_wakeup_setup(void)
 117 {
 118         /*
 119          * Enable ARM XOR clock and release peripheral from reset by
 120          * writing 1 to PER_EN bit in ARM_RSTCT2, this is required
 121          * for UART configuration to use UART2 to wake up.
 122          */
 123
 124         omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2);
 125         omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2);
 126         omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL);
 127
 128         /*
 129          * Turn off all interrupts except L1-2nd level cascade,
 130          * and the L2 wakeup interrupts: keypad and UART2.
 131          */
 132
 133         omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR);
 134
 135         if (cpu_is_omap1510()) {
 136                 omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD),  OMAP_IH2_MIR);
 137         }
 138
 139         if (cpu_is_omap16xx()) {
 140                 omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR);
 141
 142                 omap_writel(~0x0, OMAP_IH2_1_MIR);
 143                 omap_writel(~0x0, OMAP_IH2_2_MIR);
 144                 omap_writel(~0x0, OMAP_IH2_3_MIR);
 145         }
 146
 147         /*  New IRQ agreement */
 148         omap_writel(1, OMAP_IH1_CONTROL);
 149
 150         /* external PULL to down, bit 22 = 0 */
 151         omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2);
 152 }
 153
 154 void omap_pm_suspend(void)
 155 {
 156         unsigned int mask32 = 0;
 157         unsigned long arg0 = 0, arg1 = 0;
 158         int (*func_ptr)(unsigned short, unsigned short) = 0;
 159         unsigned short save_dsp_idlect2;
 160
 161         printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev);
 162
 163         if (machine_is_omap_osk()) {
 164                 /* Stop LED1 (D9) blink */
 165                 tps65010_set_led(LED1, OFF);
 166         }
 167
 168         /*
 169          * Step 1: turn off interrupts
 170          */
 171
 172         local_irq_disable();
 173         local_fiq_disable();
 174
 175         /*
 176          * Step 2: save registers
 177          *
 178          * The omap is a strange/beautiful device. The caches, memory
 179          * and register state are preserved across power saves.
 180          * We have to save and restore very little register state to
 181          * idle the omap.
 182          *
 183          * Save interrupt, MPUI, ARM and UPLD control registers.
 184          */
 185
 186         if (cpu_is_omap1510()) {
 187                 MPUI1510_SAVE(OMAP_IH1_MIR);
 188                 MPUI1510_SAVE(OMAP_IH2_MIR);
 189                 MPUI1510_SAVE(MPUI_CTRL);
 190                 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
 191                 MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
 192                 MPUI1510_SAVE(EMIFS_CONFIG);
 193                 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
 194         } else if (cpu_is_omap16xx()) {
 195                 MPUI1610_SAVE(OMAP_IH1_MIR);
 196                 MPUI1610_SAVE(OMAP_IH2_0_MIR);
 197                 MPUI1610_SAVE(OMAP_IH2_1_MIR);
 198                 MPUI1610_SAVE(OMAP_IH2_2_MIR);
 199                 MPUI1610_SAVE(OMAP_IH2_3_MIR);
 200                 MPUI1610_SAVE(MPUI_CTRL);
 201                 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
 202                 MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
 203                 MPUI1610_SAVE(EMIFS_CONFIG);
 204                 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
 205         }
 206
 207         ARM_SAVE(ARM_CKCTL);
 208         ARM_SAVE(ARM_IDLECT1);
 209         ARM_SAVE(ARM_IDLECT2);
 210         ARM_SAVE(ARM_EWUPCT);
 211         ARM_SAVE(ARM_RSTCT1);
 212         ARM_SAVE(ARM_RSTCT2);
 213         ARM_SAVE(ARM_SYSST);
 214         ULPD_SAVE(ULPD_CLOCK_CTRL);
 215         ULPD_SAVE(ULPD_STATUS_REQ);
 216
 217         /*
 218          * Step 3: LOW_PWR signal enabling
 219          *
 220          * Allow the LOW_PWR signal to be visible on MPUIO5 ball.
 221          */
 222         if (cpu_is_omap1510()) {
 223                 /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
 224                 omap_writew(omap_readw(ULPD_POWER_CTRL) |
 225                             OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
 226         } else if (cpu_is_omap16xx()) {
 227                 /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
 228                 omap_writew(omap_readw(ULPD_POWER_CTRL) |
 229                             OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
 230         }
 231
 232         /* configure LOW_PWR pin */
 233         omap_cfg_reg(T20_1610_LOW_PWR);
 234
 235         /*
 236          * Step 4: OMAP DSP Shutdown
 237          */
 238
 239         /* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */
 240         omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE,
 241                     ARM_RSTCT1);
 242
 243         /* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */
 244         omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG);
 245
 246         /* Set EN_DSPCK = 0, stop DSP block clock */
 247         omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL);
 248
 249         /* Stop any DSP domain clocks */
 250         omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
 251         save_dsp_idlect2 = __raw_readw(DSP_IDLECT2);
 252         __raw_writew(0, DSP_IDLECT2);
 253
 254         /*
 255          * Step 5: Wakeup Event Setup
 256          */
 257
 258         omap_pm_wakeup_setup();
 259
 260         /*
 261          * Step 6a: ARM and Traffic controller shutdown
 262          *
 263          * Step 6 starts here with clock and watchdog disable
 264          */
 265
 266         /* stop clocks */
 267         mask32 = omap_readl(ARM_IDLECT2);
 268         mask32 &= ~(1<<EN_WDTCK);  /* bit 0 -> 0 (WDT clock) */
 269         mask32 |=  (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */
 270         mask32 &= ~(1<<EN_PERCK);  /* bit 2 -> 0 (MPUPER_CK clock) */
 271         mask32 &= ~(1<<EN_LCDCK);  /* bit 3 -> 0 (LCDC clock) */
 272         mask32 &= ~(1<<EN_LBCK);   /* bit 4 -> 0 (local bus clock) */
 273         mask32 |=  (1<<EN_APICK);  /* bit 6 -> 1 (MPUI clock) */
 274         mask32 &= ~(1<<EN_TIMCK);  /* bit 7 -> 0 (MPU timer clock) */
 275         mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */
 276         mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */
 277         omap_writel(mask32, ARM_IDLECT2);
 278
 279         /* disable ARM watchdog */
 280         omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
 281         omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
 282
 283         /*
 284          * Step 6b: ARM and Traffic controller shutdown
 285          *
 286          * Step 6 continues here. Prepare jump to power management
 287          * assembly code in internal SRAM.
 288          *
 289          * Since the omap_cpu_suspend routine has been copied to
 290          * SRAM, we'll do an indirect procedure call to it and pass the
 291          * contents of arm_idlect1 and arm_idlect2 so it can restore
 292          * them when it wakes up and it will return.
 293          */
 294
 295         arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
 296         arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
 297
 298         if (cpu_is_omap1510()) {
 299                 func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND);
 300         } else if (cpu_is_omap1610() || cpu_is_omap1710()) {
 301                 func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND);
 302         } else if (cpu_is_omap5912()) {
 303                 func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND);
 304         }
 305
 306         /*
 307          * Step 6c: ARM and Traffic controller shutdown
 308          *
 309          * Jump to assembly code. The processor will stay there
 310          * until wake up.
 311          */
 312
 313         func_ptr(arg0, arg1);
 314
 315         /*
 316          * If we are here, processor is woken up!
 317          */
 318
 319         if (cpu_is_omap1510()) {
 320                 /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
 321                 omap_writew(omap_readw(ULPD_POWER_CTRL) &
 322                             ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
 323         } else if (cpu_is_omap16xx()) {
 324                 /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
 325                 omap_writew(omap_readw(ULPD_POWER_CTRL) &
 326                             ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
 327         }
 328
 329
 330         /* Restore DSP clocks */
 331         omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
 332         __raw_writew(save_dsp_idlect2, DSP_IDLECT2);
 333         ARM_RESTORE(ARM_IDLECT2);
 334
 335         /*
 336          * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
 337          */
 338
 339         ARM_RESTORE(ARM_CKCTL);
 340         ARM_RESTORE(ARM_EWUPCT);
 341         ARM_RESTORE(ARM_RSTCT1);
 342         ARM_RESTORE(ARM_RSTCT2);
 343         ARM_RESTORE(ARM_SYSST);
 344         ULPD_RESTORE(ULPD_CLOCK_CTRL);
 345         ULPD_RESTORE(ULPD_STATUS_REQ);
 346
 347         if (cpu_is_omap1510()) {
 348                 MPUI1510_RESTORE(MPUI_CTRL);
 349                 MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 350                 MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
 351                 MPUI1510_RESTORE(EMIFS_CONFIG);
 352                 MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
 353                 MPUI1510_RESTORE(OMAP_IH1_MIR);
 354                 MPUI1510_RESTORE(OMAP_IH2_MIR);
 355         } else if (cpu_is_omap16xx()) {
 356                 MPUI1610_RESTORE(MPUI_CTRL);
 357                 MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
 358                 MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
 359                 MPUI1610_RESTORE(EMIFS_CONFIG);
 360                 MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
 361
 362                 MPUI1610_RESTORE(OMAP_IH1_MIR);
 363                 MPUI1610_RESTORE(OMAP_IH2_0_MIR);
 364                 MPUI1610_RESTORE(OMAP_IH2_1_MIR);
 365                 MPUI1610_RESTORE(OMAP_IH2_2_MIR);
 366                 MPUI1610_RESTORE(OMAP_IH2_3_MIR);
 367         }
 368
 369         /*
 370          * Reenable interrupts
 371          */
 372
 373         local_irq_enable();
 374         local_fiq_enable();
 375
 376         printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
 377
 378         if (machine_is_omap_osk()) {
 379                 /* Let LED1 (D9) blink again */
 380                 tps65010_set_led(LED1, BLINK);
 381         }
 382 }
 383
 384 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
 385 static int g_read_completed;
 386
 387 /*
 388  * Read system PM registers for debugging
 389  */
 390 static int omap_pm_read_proc(
 391         char *page_buffer,
 392         char **my_first_byte,
 393         off_t virtual_start,
 394         int length,
 395         int *eof,
 396         void *data)
 397 {
 398         int my_buffer_offset = 0;
 399         char * const my_base = page_buffer;
 400
 401         ARM_SAVE(ARM_CKCTL);
 402         ARM_SAVE(ARM_IDLECT1);
 403         ARM_SAVE(ARM_IDLECT2);
 404         ARM_SAVE(ARM_EWUPCT);
 405         ARM_SAVE(ARM_RSTCT1);
 406         ARM_SAVE(ARM_RSTCT2);
 407         ARM_SAVE(ARM_SYSST);
 408
 409         ULPD_SAVE(ULPD_IT_STATUS);
 410         ULPD_SAVE(ULPD_CLOCK_CTRL);
 411         ULPD_SAVE(ULPD_SOFT_REQ);
 412         ULPD_SAVE(ULPD_STATUS_REQ);
 413         ULPD_SAVE(ULPD_DPLL_CTRL);
 414         ULPD_SAVE(ULPD_POWER_CTRL);
 415
 416         if (cpu_is_omap1510()) {
 417                 MPUI1510_SAVE(MPUI_CTRL);
 418                 MPUI1510_SAVE(MPUI_DSP_STATUS);
 419                 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
 420                 MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
 421                 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
 422                 MPUI1510_SAVE(EMIFS_CONFIG);
 423         } else if (cpu_is_omap16xx()) {
 424                 MPUI1610_SAVE(MPUI_CTRL);
 425                 MPUI1610_SAVE(MPUI_DSP_STATUS);
 426                 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
 427                 MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
 428                 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
 429                 MPUI1610_SAVE(EMIFS_CONFIG);
 430         }
 431
 432         if (virtual_start == 0) {
 433                 g_read_completed = 0;
 434
 435                 my_buffer_offset += sprintf(my_base + my_buffer_offset,
 436                    "ARM_CKCTL_REG:            0x%-8x     \n"
 437                    "ARM_IDLECT1_REG:          0x%-8x     \n"
 438                    "ARM_IDLECT2_REG:          0x%-8x     \n"
 439                    "ARM_EWUPCT_REG:           0x%-8x     \n"
 440                    "ARM_RSTCT1_REG:           0x%-8x     \n"
 441                    "ARM_RSTCT2_REG:           0x%-8x     \n"
 442                    "ARM_SYSST_REG:            0x%-8x     \n"
 443                    "ULPD_IT_STATUS_REG:       0x%-4x     \n"
 444                    "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
 445                    "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
 446                    "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
 447                    "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
 448                    "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
 449                    ARM_SHOW(ARM_CKCTL),
 450                    ARM_SHOW(ARM_IDLECT1),
 451                    ARM_SHOW(ARM_IDLECT2),
 452                    ARM_SHOW(ARM_EWUPCT),
 453                    ARM_SHOW(ARM_RSTCT1),
 454                    ARM_SHOW(ARM_RSTCT2),
 455                    ARM_SHOW(ARM_SYSST),
 456                    ULPD_SHOW(ULPD_IT_STATUS),
 457                    ULPD_SHOW(ULPD_CLOCK_CTRL),
 458                    ULPD_SHOW(ULPD_SOFT_REQ),
 459                    ULPD_SHOW(ULPD_DPLL_CTRL),
 460                    ULPD_SHOW(ULPD_STATUS_REQ),
 461                    ULPD_SHOW(ULPD_POWER_CTRL));
 462
 463                 if (cpu_is_omap1510()) {
 464                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
 465                            "MPUI1510_CTRL_REG             0x%-8x \n"
 466                            "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
 467                            "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
 468                            "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
 469                            "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
 470                            "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
 471                            MPUI1510_SHOW(MPUI_CTRL),
 472                            MPUI1510_SHOW(MPUI_DSP_STATUS),
 473                            MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
 474                            MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
 475                            MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
 476                            MPUI1510_SHOW(EMIFS_CONFIG));
 477                 } else if (cpu_is_omap16xx()) {
 478                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
 479                            "MPUI1610_CTRL_REG             0x%-8x \n"
 480                            "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
 481                            "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
 482                            "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
 483                            "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
 484                            "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
 485                            MPUI1610_SHOW(MPUI_CTRL),
 486                            MPUI1610_SHOW(MPUI_DSP_STATUS),
 487                            MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
 488                            MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
 489                            MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
 490                            MPUI1610_SHOW(EMIFS_CONFIG));
 491                 }
 492
 493                 g_read_completed++;
 494         } else if (g_read_completed >= 1) {
 495                  *eof = 1;
 496                  return 0;
 497         }
 498         g_read_completed++;
 499
 500         *my_first_byte = page_buffer;
 501         return  my_buffer_offset;
 502 }
 503
 504 static void omap_pm_init_proc(void)
 505 {
 506         struct proc_dir_entry *entry;
 507
 508         entry = create_proc_read_entry("driver/omap_pm",
 509                                        S_IWUSR | S_IRUGO, NULL,
 510                                        omap_pm_read_proc, 0);
 511 }
 512
 513 #endif /* DEBUG && CONFIG_PROC_FS */
 514
 515 /*
 516  *      omap_pm_prepare - Do preliminary suspend work.
 517  *      @state:         suspend state we're entering.
 518  *
 519  */
 520 //#include <asm/arch/hardware.h>
 521
 522 static int omap_pm_prepare(suspend_state_t state)
 523 {
 524         int error = 0;
 525
 526         switch (state)
 527         {
 528         case PM_SUSPEND_STANDBY:
 529         case PM_SUSPEND_MEM:
 530                 break;
 531
 532         case PM_SUSPEND_DISK:
 533                 return -ENOTSUPP;
 534
 535         default:
 536                 return -EINVAL;
 537         }
 538
 539         return error;
 540 }
 541
 542
 543 /*
 544  *      omap_pm_enter - Actually enter a sleep state.
 545  *      @state:         State we're entering.
 546  *
 547  */
 548
 549 static int omap_pm_enter(suspend_state_t state)
 550 {
 551         switch (state)
 552         {
 553         case PM_SUSPEND_STANDBY:
 554         case PM_SUSPEND_MEM:
 555                 omap_pm_suspend();
 556                 break;
 557
 558         case PM_SUSPEND_DISK:
 559                 return -ENOTSUPP;
 560
 561         default:
 562                 return -EINVAL;
 563         }
 564
 565         return 0;
 566 }
 567
 568
 569 /**
 570  *      omap_pm_finish - Finish up suspend sequence.
 571  *      @state:         State we're coming out of.
 572  *
 573  *      This is called after we wake back up (or if entering the sleep state
 574  *      failed).
 575  */
 576
 577 static int omap_pm_finish(suspend_state_t state)
 578 {
 579         return 0;
 580 }
 581
 582
 583 struct pm_ops omap_pm_ops ={
 584         .pm_disk_mode = 0,
 585         .prepare        = omap_pm_prepare,
 586         .enter          = omap_pm_enter,
 587         .finish         = omap_pm_finish,
 588 };
 589
 590 static int __init omap_pm_init(void)
 591 {
 592         printk("Power Management for TI OMAP.\n");
 593         pm_idle = omap_pm_idle;
 594         /*
 595          * We copy the assembler sleep/wakeup routines to SRAM.
 596          * These routines need to be in SRAM as that's the only
 597          * memory the MPU can see when it wakes up.
 598          */
 599
 600 #ifdef  CONFIG_ARCH_OMAP1510
 601         if (cpu_is_omap1510()) {
 602                 memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND,
 603                        omap1510_idle_loop_suspend,
 604                        omap1510_idle_loop_suspend_sz);
 605                 memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend,
 606                        omap1510_cpu_suspend_sz);
 607         } else
 608 #endif
 609         if (cpu_is_omap1610() || cpu_is_omap1710()) {
 610                 memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND,
 611                        omap1610_idle_loop_suspend,
 612                        omap1610_idle_loop_suspend_sz);
 613                 memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend,
 614                        omap1610_cpu_suspend_sz);
 615         } else if (cpu_is_omap5912()) {
 616                 memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND,
 617                        omap1610_idle_loop_suspend,
 618                        omap1610_idle_loop_suspend_sz);
 619                 memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend,
 620                        omap1610_cpu_suspend_sz);
 621         }
 622
 623         pm_set_ops(&omap_pm_ops);
 624
 625 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
 626         omap_pm_init_proc();
 627 #endif
 628
 629         return 0;
 630 }
 631 __initcall(omap_pm_init);
 632