Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixes
[sfrench/cifs-2.6.git] / arch / arm / mach-ep93xx / simone.c
1 /*
2  * arch/arm/mach-ep93xx/simone.c
3  * Simplemachines Sim.One support.
4  *
5  * Copyright (C) 2010 Ryan Mallon
6  *
7  * Based on the 2.6.24.7 support:
8  *   Copyright (C) 2009 Simplemachines
9  *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or (at
14  * your option) any later version.
15  *
16  */
17
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/platform_device.h>
21 #include <linux/i2c.h>
22 #include <linux/mmc/host.h>
23 #include <linux/spi/spi.h>
24 #include <linux/spi/mmc_spi.h>
25 #include <linux/platform_data/video-ep93xx.h>
26 #include <linux/platform_data/spi-ep93xx.h>
27 #include <linux/gpio.h>
28
29 #include <mach/hardware.h>
30 #include <mach/gpio-ep93xx.h>
31
32 #include <asm/mach-types.h>
33 #include <asm/mach/arch.h>
34
35 #include "soc.h"
36
37 static struct ep93xx_eth_data __initdata simone_eth_data = {
38         .phy_id         = 1,
39 };
40
41 static struct ep93xxfb_mach_info __initdata simone_fb_info = {
42         .flags          = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
43 };
44
45 static struct mmc_spi_platform_data simone_mmc_spi_data = {
46         .detect_delay   = 500,
47         .ocr_mask       = MMC_VDD_32_33 | MMC_VDD_33_34,
48         .flags          = MMC_SPI_USE_CD_GPIO,
49         .cd_gpio        = EP93XX_GPIO_LINE_EGPIO0,
50         .cd_debounce    = 1,
51 };
52
53 static struct spi_board_info simone_spi_devices[] __initdata = {
54         {
55                 .modalias               = "mmc_spi",
56                 .platform_data          = &simone_mmc_spi_data,
57                 /*
58                  * We use 10 MHz even though the maximum is 3.7 MHz. The driver
59                  * will limit it automatically to max. frequency.
60                  */
61                 .max_speed_hz           = 10 * 1000 * 1000,
62                 .bus_num                = 0,
63                 .chip_select            = 0,
64                 .mode                   = SPI_MODE_3,
65         },
66 };
67
68 /*
69  * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
70  * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
71  * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
72  */
73 static int simone_spi_chipselects[] __initdata = {
74         EP93XX_GPIO_LINE_EGPIO1,
75 };
76
77 static struct ep93xx_spi_info simone_spi_info __initdata = {
78         .chipselect     = simone_spi_chipselects,
79         .num_chipselect = ARRAY_SIZE(simone_spi_chipselects),
80         .use_dma = 1,
81 };
82
83 static struct i2c_board_info __initdata simone_i2c_board_info[] = {
84         {
85                 I2C_BOARD_INFO("ds1337", 0x68),
86         },
87 };
88
89 static struct platform_device simone_audio_device = {
90         .name           = "simone-audio",
91         .id             = -1,
92 };
93
94 static void __init simone_register_audio(void)
95 {
96         ep93xx_register_ac97();
97         platform_device_register(&simone_audio_device);
98 }
99
100 static void __init simone_init_machine(void)
101 {
102         ep93xx_init_devices();
103         ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
104         ep93xx_register_eth(&simone_eth_data, 1);
105         ep93xx_register_fb(&simone_fb_info);
106         ep93xx_register_i2c(simone_i2c_board_info,
107                             ARRAY_SIZE(simone_i2c_board_info));
108         ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
109                             ARRAY_SIZE(simone_spi_devices));
110         simone_register_audio();
111 }
112
113 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
114         /* Maintainer: Ryan Mallon */
115         .atag_offset    = 0x100,
116         .map_io         = ep93xx_map_io,
117         .init_irq       = ep93xx_init_irq,
118         .init_time      = ep93xx_timer_init,
119         .init_machine   = simone_init_machine,
120         .init_late      = ep93xx_init_late,
121         .restart        = ep93xx_restart,
122 MACHINE_END