arch/arm/boot/dts/tegra124-nyan.dtsi

   1 #include <dt-bindings/input/input.h>
   2 #include "tegra124.dtsi"
   3
   4 / {
   5         aliases {
   6                 rtc0 = "/i2c@7000d000/pmic@40";
   7                 rtc1 = "/rtc@7000e000";
   8                 serial0 = &uarta;
   9         };
  10
  11         chosen {
  12                 stdout-path = "serial0:115200n8";
  13         };
  14
  15         memory {
  16                 reg = <0x0 0x80000000 0x0 0x80000000>;
  17         };
  18
  19         host1x@50000000 {
  20                 hdmi@54280000 {
  21                         status = "okay";
  22
  23                         vdd-supply = <&vdd_3v3_hdmi>;
  24                         pll-supply = <&vdd_hdmi_pll>;
  25                         hdmi-supply = <&vdd_5v0_hdmi>;
  26
  27                         nvidia,ddc-i2c-bus = <&hdmi_ddc>;
  28                         nvidia,hpd-gpio =
  29                                 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
  30                 };
  31
  32                 sor@54540000 {
  33                         status = "okay";
  34
  35                         nvidia,dpaux = <&dpaux>;
  36                         nvidia,panel = <&panel>;
  37                 };
  38
  39                 dpaux@545c0000 {
  40                         vdd-supply = <&vdd_3v3_panel>;
  41                         status = "okay";
  42                 };
  43         };
  44
  45         gpu@0,57000000 {
  46                 status = "okay";
  47
  48                 vdd-supply = <&vdd_gpu>;
  49         };
  50
  51         serial@70006000 {
  52                 /* Debug connector on the bottom of the board near SD card. */
  53                 status = "okay";
  54         };
  55
  56         pwm@7000a000 {
  57                 status = "okay";
  58         };
  59
  60         i2c@7000c000 {
  61                 status = "okay";
  62                 clock-frequency = <100000>;
  63
  64                 acodec: audio-codec@10 {
  65                         compatible = "maxim,max98090";
  66                         reg = <0x10>;
  67                         interrupt-parent = <&gpio>;
  68                         interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
  69                 };
  70
  71                 temperature-sensor@4c {
  72                         compatible = "ti,tmp451";
  73                         reg = <0x4c>;
  74                         interrupt-parent = <&gpio>;
  75                         interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
  76
  77                         #thermal-sensor-cells = <1>;
  78                 };
  79         };
  80
  81         i2c@7000c400 {
  82                 status = "okay";
  83                 clock-frequency = <100000>;
  84
  85                 trackpad@15 {
  86                         compatible = "elan,ekth3000";
  87                         reg = <0x15>;
  88                         interrupt-parent = <&gpio>;
  89                         interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
  90                         wakeup-source;
  91                 };
  92         };
  93
  94         i2c@7000c500 {
  95                 status = "okay";
  96                 clock-frequency = <400000>;
  97
  98                 tpm@20 {
  99                         compatible = "infineon,slb9645tt";
 100                         reg = <0x20>;
 101                 };
 102         };
 103
 104         hdmi_ddc: i2c@7000c700 {
 105                 status = "okay";
 106                 clock-frequency = <100000>;
 107         };
 108
 109         i2c@7000d000 {
 110                 status = "okay";
 111                 clock-frequency = <400000>;
 112
 113                 pmic: pmic@40 {
 114                         compatible = "ams,as3722";
 115                         reg = <0x40>;
 116                         interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 117
 118                         ams,system-power-controller;
 119
 120                         #interrupt-cells = <2>;
 121                         interrupt-controller;
 122
 123                         gpio-controller;
 124                         #gpio-cells = <2>;
 125
 126                         pinctrl-names = "default";
 127                         pinctrl-0 = <&as3722_default>;
 128
 129                         as3722_default: pinmux {
 130                                 gpio0 {
 131                                         pins = "gpio0";
 132                                         function = "gpio";
 133                                         bias-pull-down;
 134                                 };
 135
 136                                 gpio1 {
 137                                         pins = "gpio1";
 138                                         function = "gpio";
 139                                         bias-pull-up;
 140                                 };
 141
 142                                 gpio2_4_7 {
 143                                         pins = "gpio2", "gpio4", "gpio7";
 144                                         function = "gpio";
 145                                         bias-pull-up;
 146                                 };
 147
 148                                 gpio3_6 {
 149                                         pins = "gpio3", "gpio6";
 150                                         bias-high-impedance;
 151                                 };
 152
 153                                 gpio5 {
 154                                         pins = "gpio5";
 155                                         function = "clk32k-out";
 156                                         bias-pull-down;
 157                                 };
 158                         };
 159
 160                         regulators {
 161                                 vsup-sd2-supply = <&vdd_5v0_sys>;
 162                                 vsup-sd3-supply = <&vdd_5v0_sys>;
 163                                 vsup-sd4-supply = <&vdd_5v0_sys>;
 164                                 vsup-sd5-supply = <&vdd_5v0_sys>;
 165                                 vin-ldo0-supply = <&vdd_1v35_lp0>;
 166                                 vin-ldo1-6-supply = <&vdd_3v3_run>;
 167                                 vin-ldo2-5-7-supply = <&vddio_1v8>;
 168                                 vin-ldo3-4-supply = <&vdd_3v3_sys>;
 169                                 vin-ldo9-10-supply = <&vdd_5v0_sys>;
 170                                 vin-ldo11-supply = <&vdd_3v3_run>;
 171
 172                                 vdd_cpu: sd0 {
 173                                         regulator-name = "+VDD_CPU_AP";
 174                                         regulator-min-microvolt = <700000>;
 175                                         regulator-max-microvolt = <1350000>;
 176                                         regulator-min-microamp = <3500000>;
 177                                         regulator-max-microamp = <3500000>;
 178                                         regulator-always-on;
 179                                         regulator-boot-on;
 180                                         ams,ext-control = <2>;
 181                                 };
 182
 183                                 sd1 {
 184                                         regulator-name = "+VDD_CORE";
 185                                         regulator-min-microvolt = <700000>;
 186                                         regulator-max-microvolt = <1350000>;
 187                                         regulator-min-microamp = <2500000>;
 188                                         regulator-max-microamp = <4000000>;
 189                                         regulator-always-on;
 190                                         regulator-boot-on;
 191                                         ams,ext-control = <1>;
 192                                 };
 193
 194                                 vdd_1v35_lp0: sd2 {
 195                                         regulator-name = "+1.35V_LP0(sd2)";
 196                                         regulator-min-microvolt = <1350000>;
 197                                         regulator-max-microvolt = <1350000>;
 198                                         regulator-always-on;
 199                                         regulator-boot-on;
 200                                 };
 201
 202                                 sd3 {
 203                                         regulator-name = "+1.35V_LP0(sd3)";
 204                                         regulator-min-microvolt = <1350000>;
 205                                         regulator-max-microvolt = <1350000>;
 206                                         regulator-always-on;
 207                                         regulator-boot-on;
 208                                 };
 209
 210                                 vdd_1v05_run: sd4 {
 211                                         regulator-name = "+1.05V_RUN";
 212                                         regulator-min-microvolt = <1050000>;
 213                                         regulator-max-microvolt = <1050000>;
 214                                 };
 215
 216                                 vddio_1v8: sd5 {
 217                                         regulator-name = "+1.8V_VDDIO";
 218                                         regulator-min-microvolt = <1800000>;
 219                                         regulator-max-microvolt = <1800000>;
 220                                         regulator-always-on;
 221                                 };
 222
 223                                 vdd_gpu: sd6 {
 224                                         regulator-name = "+VDD_GPU_AP";
 225                                         regulator-min-microvolt = <650000>;
 226                                         regulator-max-microvolt = <1200000>;
 227                                         regulator-min-microamp = <3500000>;
 228                                         regulator-max-microamp = <3500000>;
 229                                         regulator-boot-on;
 230                                         regulator-always-on;
 231                                 };
 232
 233                                 avdd_1v05_run: ldo0 {
 234                                         regulator-name = "+1.05V_RUN_AVDD";
 235                                         regulator-min-microvolt = <1050000>;
 236                                         regulator-max-microvolt = <1050000>;
 237                                         regulator-boot-on;
 238                                         regulator-always-on;
 239                                         ams,ext-control = <1>;
 240                                 };
 241
 242                                 ldo1 {
 243                                         regulator-name = "+1.8V_RUN_CAM";
 244                                         regulator-min-microvolt = <1800000>;
 245                                         regulator-max-microvolt = <1800000>;
 246                                 };
 247
 248                                 ldo2 {
 249                                         regulator-name = "+1.2V_GEN_AVDD";
 250                                         regulator-min-microvolt = <1200000>;
 251                                         regulator-max-microvolt = <1200000>;
 252                                         regulator-boot-on;
 253                                         regulator-always-on;
 254                                 };
 255
 256                                 ldo3 {
 257                                         regulator-name = "+1.00V_LP0_VDD_RTC";
 258                                         regulator-min-microvolt = <1000000>;
 259                                         regulator-max-microvolt = <1000000>;
 260                                         regulator-boot-on;
 261                                         regulator-always-on;
 262                                         ams,enable-tracking;
 263                                 };
 264
 265                                 vdd_run_cam: ldo4 {
 266                                         regulator-name = "+3.3V_RUN_CAM";
 267                                         regulator-min-microvolt = <2800000>;
 268                                         regulator-max-microvolt = <2800000>;
 269                                 };
 270
 271                                 ldo5 {
 272                                         regulator-name = "+1.2V_RUN_CAM_FRONT";
 273                                         regulator-min-microvolt = <1200000>;
 274                                         regulator-max-microvolt = <1200000>;
 275                                 };
 276
 277                                 vddio_sdmmc3: ldo6 {
 278                                         regulator-name = "+VDDIO_SDMMC3";
 279                                         regulator-min-microvolt = <1800000>;
 280                                         regulator-max-microvolt = <3300000>;
 281                                 };
 282
 283                                 ldo7 {
 284                                         regulator-name = "+1.05V_RUN_CAM_REAR";
 285                                         regulator-min-microvolt = <1050000>;
 286                                         regulator-max-microvolt = <1050000>;
 287                                 };
 288
 289                                 ldo9 {
 290                                         regulator-name = "+2.8V_RUN_TOUCH";
 291                                         regulator-min-microvolt = <2800000>;
 292                                         regulator-max-microvolt = <2800000>;
 293                                 };
 294
 295                                 ldo10 {
 296                                         regulator-name = "+2.8V_RUN_CAM_AF";
 297                                         regulator-min-microvolt = <2800000>;
 298                                         regulator-max-microvolt = <2800000>;
 299                                 };
 300
 301                                 ldo11 {
 302                                         regulator-name = "+1.8V_RUN_VPP_FUSE";
 303                                         regulator-min-microvolt = <1800000>;
 304                                         regulator-max-microvolt = <1800000>;
 305                                 };
 306                         };
 307                 };
 308         };
 309
 310         spi@7000d400 {
 311                 status = "okay";
 312
 313                 cros_ec: cros-ec@0 {
 314                         compatible = "google,cros-ec-spi";
 315                         spi-max-frequency = <3000000>;
 316                         interrupt-parent = <&gpio>;
 317                         interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 318                         reg = <0>;
 319
 320                         google,cros-ec-spi-msg-delay = <2000>;
 321
 322                         i2c-tunnel {
 323                                 compatible = "google,cros-ec-i2c-tunnel";
 324                                 #address-cells = <1>;
 325                                 #size-cells = <0>;
 326
 327                                 google,remote-bus = <0>;
 328
 329                                 charger: bq24735@9 {
 330                                         compatible = "ti,bq24735";
 331                                         reg = <0x9>;
 332                                         interrupt-parent = <&gpio>;
 333                                         interrupts = <TEGRA_GPIO(J, 0)
 334                                                         IRQ_TYPE_EDGE_BOTH>;
 335                                         ti,ac-detect-gpios = <&gpio
 336                                                         TEGRA_GPIO(J, 0)
 337                                                         GPIO_ACTIVE_HIGH>;
 338                                         ti,external-control;
 339                                 };
 340
 341                                 battery: sbs-battery@b {
 342                                         compatible = "sbs,sbs-battery";
 343                                         reg = <0xb>;
 344                                         sbs,i2c-retry-count = <2>;
 345                                         sbs,poll-retry-count = <10>;
 346                                         power-supplies = <&charger>;
 347                                 };
 348                         };
 349                 };
 350         };
 351
 352         spi@7000da00 {
 353                 status = "okay";
 354                 spi-max-frequency = <25000000>;
 355
 356                 flash@0 {
 357                         compatible = "winbond,w25q32dw";
 358                         spi-max-frequency = <25000000>;
 359                         reg = <0>;
 360                 };
 361         };
 362
 363         pmc@7000e400 {
 364                 nvidia,invert-interrupt;
 365                 nvidia,suspend-mode = <0>;
 366                 nvidia,cpu-pwr-good-time = <500>;
 367                 nvidia,cpu-pwr-off-time = <300>;
 368                 nvidia,core-pwr-good-time = <641 3845>;
 369                 nvidia,core-pwr-off-time = <61036>;
 370                 nvidia,core-power-req-active-high;
 371                 nvidia,sys-clock-req-active-high;
 372         };
 373
 374         hda@70030000 {
 375                 status = "okay";
 376         };
 377
 378         usb@70090000 {
 379                 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
 380                        <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
 381                        <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
 382                        <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
 383                        <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 384                 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 385
 386                 avddio-pex-supply = <&vdd_1v05_run>;
 387                 dvddio-pex-supply = <&vdd_1v05_run>;
 388                 avdd-usb-supply = <&vdd_3v3_lp0>;
 389                 avdd-pll-utmip-supply = <&vddio_1v8>;
 390                 avdd-pll-erefe-supply = <&avdd_1v05_run>;
 391                 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
 392                 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
 393                 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
 394
 395                 status = "okay";
 396         };
 397
 398         padctl@7009f000 {
 399                 status = "okay";
 400
 401                 pads {
 402                         usb2 {
 403                                 status = "okay";
 404
 405                                 lanes {
 406                                         usb2-0 {
 407                                                 nvidia,function = "xusb";
 408                                                 status = "okay";
 409                                         };
 410
 411                                         usb2-1 {
 412                                                 nvidia,function = "xusb";
 413                                                 status = "okay";
 414                                         };
 415
 416                                         usb2-2 {
 417                                                 nvidia,function = "xusb";
 418                                                 status = "okay";
 419                                         };
 420                                 };
 421                         };
 422
 423                         pcie {
 424                                 status = "okay";
 425
 426                                 lanes {
 427                                         pcie-0 {
 428                                                 nvidia,function = "usb3-ss";
 429                                                 status = "okay";
 430                                         };
 431
 432                                         pcie-1 {
 433                                                 nvidia,function = "usb3-ss";
 434                                                 status = "okay";
 435                                         };
 436                                 };
 437                         };
 438                 };
 439
 440                 ports {
 441                         usb2-0 {
 442                                 vbus-supply = <&vdd_usb1_vbus>;
 443                                 status = "okay";
 444                                 mode = "otg";
 445                         };
 446
 447                         usb2-1 {
 448                                 vbus-supply = <&vdd_run_cam>;
 449                                 status = "okay";
 450                                 mode = "host";
 451                         };
 452
 453                         usb2-2 {
 454                                 vbus-supply = <&vdd_usb3_vbus>;
 455                                 status = "okay";
 456                                 mode = "host";
 457                         };
 458
 459                         usb3-0 {
 460                                 nvidia,usb2-companion = <0>;
 461                                 status = "okay";
 462                         };
 463
 464                         usb3-1 {
 465                                 nvidia,usb2-companion = <1>;
 466                                 status = "okay";
 467                         };
 468                 };
 469         };
 470
 471         sdhci0_pwrseq: sdhci0_pwrseq {
 472                 compatible = "mmc-pwrseq-simple";
 473
 474                 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 475         };
 476
 477         sdhci@700b0000 { /* WiFi/BT on this bus */
 478                 status = "okay";
 479                 bus-width = <4>;
 480                 no-1-8-v;
 481                 non-removable;
 482                 mmc-pwrseq = <&sdhci0_pwrseq>;
 483                 vmmc-supply = <&vdd_3v3_lp0>;
 484                 vqmmc-supply = <&vddio_1v8>;
 485                 keep-power-in-suspend;
 486         };
 487
 488         sdhci@700b0400 { /* SD Card on this bus */
 489                 status = "okay";
 490                 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 491                 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 492                 bus-width = <4>;
 493                 no-1-8-v;
 494                 vqmmc-supply = <&vddio_sdmmc3>;
 495         };
 496
 497         sdhci@700b0600 { /* eMMC on this bus */
 498                 status = "okay";
 499                 bus-width = <8>;
 500                 no-1-8-v;
 501                 non-removable;
 502         };
 503
 504         /* CPU DFLL clock */
 505         clock@70110000 {
 506                 status = "disabled";
 507                 vdd-cpu-supply = <&vdd_cpu>;
 508                 nvidia,i2c-fs-rate = <400000>;
 509         };
 510
 511         ahub@70300000 {
 512                 i2s@70301100 {
 513                         status = "okay";
 514                 };
 515         };
 516
 517         backlight: backlight {
 518                 compatible = "pwm-backlight";
 519
 520                 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 521                 power-supply = <&vdd_led>;
 522                 pwms = <&pwm 1 1000000>;
 523
 524                 default-brightness-level = <224>;
 525                 brightness-levels =
 526                         <  0   1   2   3   4   5   6   7
 527                            8   9  10  11  12  13  14  15
 528                           16  17  18  19  20  21  22  23
 529                           24  25  26  27  28  29  30  31
 530                           32  33  34  35  36  37  38  39
 531                           40  41  42  43  44  45  46  47
 532                           48  49  50  51  52  53  54  55
 533                           56  57  58  59  60  61  62  63
 534                           64  65  66  67  68  69  70  71
 535                           72  73  74  75  76  77  78  79
 536                           80  81  82  83  84  85  86  87
 537                           88  89  90  91  92  93  94  95
 538                           96  97  98  99 100 101 102 103
 539                          104 105 106 107 108 109 110 111
 540                          112 113 114 115 116 117 118 119
 541                          120 121 122 123 124 125 126 127
 542                          128 129 130 131 132 133 134 135
 543                          136 137 138 139 140 141 142 143
 544                          144 145 146 147 148 149 150 151
 545                          152 153 154 155 156 157 158 159
 546                          160 161 162 163 164 165 166 167
 547                          168 169 170 171 172 173 174 175
 548                          176 177 178 179 180 181 182 183
 549                          184 185 186 187 188 189 190 191
 550                          192 193 194 195 196 197 198 199
 551                          200 201 202 203 204 205 206 207
 552                          208 209 210 211 212 213 214 215
 553                          216 217 218 219 220 221 222 223
 554                          224 225 226 227 228 229 230 231
 555                          232 233 234 235 236 237 238 239
 556                          240 241 242 243 244 245 246 247
 557                          248 249 250 251 252 253 254 255
 558                          256>;
 559         };
 560
 561         clocks {
 562                 compatible = "simple-bus";
 563                 #address-cells = <1>;
 564                 #size-cells = <0>;
 565
 566                 clk32k_in: clock@0 {
 567                         compatible = "fixed-clock";
 568                         reg = <0>;
 569                         #clock-cells = <0>;
 570                         clock-frequency = <32768>;
 571                 };
 572         };
 573
 574         cpus {
 575                 cpu@0 {
 576                         vdd-cpu-supply = <&vdd_cpu>;
 577                 };
 578         };
 579
 580         gpio-keys {
 581                 compatible = "gpio-keys";
 582
 583                 lid {
 584                         label = "Lid";
 585                         gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
 586                         linux,input-type = <5>;
 587                         linux,code = <KEY_RESERVED>;
 588                         debounce-interval = <1>;
 589                         wakeup-source;
 590                 };
 591
 592                 power {
 593                         label = "Power";
 594                         gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 595                         linux,code = <KEY_POWER>;
 596                         debounce-interval = <30>;
 597                         wakeup-source;
 598                 };
 599         };
 600
 601         regulators {
 602                 compatible = "simple-bus";
 603                 #address-cells = <1>;
 604                 #size-cells = <0>;
 605
 606                 vdd_mux: regulator@0 {
 607                         compatible = "regulator-fixed";
 608                         reg = <0>;
 609                         regulator-name = "+VDD_MUX";
 610                         regulator-min-microvolt = <12000000>;
 611                         regulator-max-microvolt = <12000000>;
 612                         regulator-always-on;
 613                         regulator-boot-on;
 614                 };
 615
 616                 vdd_5v0_sys: regulator@1 {
 617                         compatible = "regulator-fixed";
 618                         reg = <1>;
 619                         regulator-name = "+5V_SYS";
 620                         regulator-min-microvolt = <5000000>;
 621                         regulator-max-microvolt = <5000000>;
 622                         regulator-always-on;
 623                         regulator-boot-on;
 624                         vin-supply = <&vdd_mux>;
 625                 };
 626
 627                 vdd_3v3_sys: regulator@2 {
 628                         compatible = "regulator-fixed";
 629                         reg = <2>;
 630                         regulator-name = "+3.3V_SYS";
 631                         regulator-min-microvolt = <3300000>;
 632                         regulator-max-microvolt = <3300000>;
 633                         regulator-always-on;
 634                         regulator-boot-on;
 635                         vin-supply = <&vdd_mux>;
 636                 };
 637
 638                 vdd_3v3_run: regulator@3 {
 639                         compatible = "regulator-fixed";
 640                         reg = <3>;
 641                         regulator-name = "+3.3V_RUN";
 642                         regulator-min-microvolt = <3300000>;
 643                         regulator-max-microvolt = <3300000>;
 644                         regulator-always-on;
 645                         regulator-boot-on;
 646                         gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
 647                         enable-active-high;
 648                         vin-supply = <&vdd_3v3_sys>;
 649                 };
 650
 651                 vdd_3v3_hdmi: regulator@4 {
 652                         compatible = "regulator-fixed";
 653                         reg = <4>;
 654                         regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 655                         regulator-min-microvolt = <3300000>;
 656                         regulator-max-microvolt = <3300000>;
 657                         vin-supply = <&vdd_3v3_run>;
 658                 };
 659
 660                 vdd_led: regulator@5 {
 661                         compatible = "regulator-fixed";
 662                         reg = <5>;
 663                         regulator-name = "+VDD_LED";
 664                         gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
 665                         enable-active-high;
 666                         vin-supply = <&vdd_mux>;
 667                 };
 668
 669                 vdd_5v0_ts: regulator@6 {
 670                         compatible = "regulator-fixed";
 671                         reg = <6>;
 672                         regulator-name = "+5V_VDD_TS_SW";
 673                         regulator-min-microvolt = <5000000>;
 674                         regulator-max-microvolt = <5000000>;
 675                         regulator-boot-on;
 676                         gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 677                         enable-active-high;
 678                         vin-supply = <&vdd_5v0_sys>;
 679                 };
 680
 681                 vdd_usb1_vbus: regulator@7 {
 682                         compatible = "regulator-fixed";
 683                         reg = <7>;
 684                         regulator-name = "+5V_USB_HS";
 685                         regulator-min-microvolt = <5000000>;
 686                         regulator-max-microvolt = <5000000>;
 687                         gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 688                         enable-active-high;
 689                         gpio-open-drain;
 690                         vin-supply = <&vdd_5v0_sys>;
 691                 };
 692
 693                 vdd_usb3_vbus: regulator@8 {
 694                         compatible = "regulator-fixed";
 695                         reg = <8>;
 696                         regulator-name = "+5V_USB_SS";
 697                         regulator-min-microvolt = <5000000>;
 698                         regulator-max-microvolt = <5000000>;
 699                         gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 700                         enable-active-high;
 701                         gpio-open-drain;
 702                         vin-supply = <&vdd_5v0_sys>;
 703                 };
 704
 705                 vdd_3v3_panel: regulator@9 {
 706                         compatible = "regulator-fixed";
 707                         reg = <9>;
 708                         regulator-name = "+3.3V_PANEL";
 709                         regulator-min-microvolt = <3300000>;
 710                         regulator-max-microvolt = <3300000>;
 711                         gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
 712                         enable-active-high;
 713                         vin-supply = <&vdd_3v3_run>;
 714                 };
 715
 716                 vdd_3v3_lp0: regulator@10 {
 717                         compatible = "regulator-fixed";
 718                         reg = <10>;
 719                         regulator-name = "+3.3V_LP0";
 720                         regulator-min-microvolt = <3300000>;
 721                         regulator-max-microvolt = <3300000>;
 722                         /*
 723                          * TODO: find a way to wire this up with the USB EHCI
 724                          * controllers so that it can be enabled on demand.
 725                          */
 726                         regulator-always-on;
 727                         gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 728                         enable-active-high;
 729                         vin-supply = <&vdd_3v3_sys>;
 730                 };
 731
 732                 vdd_hdmi_pll: regulator@11 {
 733                         compatible = "regulator-fixed";
 734                         reg = <11>;
 735                         regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 736                         regulator-min-microvolt = <1050000>;
 737                         regulator-max-microvolt = <1050000>;
 738                         gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
 739                         vin-supply = <&vdd_1v05_run>;
 740                 };
 741
 742                 vdd_5v0_hdmi: regulator@12 {
 743                         compatible = "regulator-fixed";
 744                         reg = <12>;
 745                         regulator-name = "+5V_HDMI_CON";
 746                         regulator-min-microvolt = <5000000>;
 747                         regulator-max-microvolt = <5000000>;
 748                         gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
 749                         enable-active-high;
 750                         vin-supply = <&vdd_5v0_sys>;
 751                 };
 752         };
 753
 754         sound {
 755                 nvidia,audio-routing =
 756                         "Headphones", "HPR",
 757                         "Headphones", "HPL",
 758                         "Speakers", "SPKR",
 759                         "Speakers", "SPKL",
 760                         "Mic Jack", "MICBIAS",
 761                         "DMICL", "Int Mic",
 762                         "DMICR", "Int Mic",
 763                         "IN34", "Mic Jack";
 764
 765                 nvidia,i2s-controller = <&tegra_i2s1>;
 766                 nvidia,audio-codec = <&acodec>;
 767
 768                 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 769                          <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
 770                          <&tegra_car TEGRA124_CLK_EXTERN1>;
 771                 clock-names = "pll_a", "pll_a_out0", "mclk";
 772
 773                 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
 774                 nvidia,mic-det-gpios =
 775                                 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 776         };
 777
 778         gpio-restart {
 779                 compatible = "gpio-restart";
 780                 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 781                 priority = <200>;
 782         };
 783 };
 784
 785 #include "cros-ec-keyboard.dtsi"