arch/arm/boot/dts/stih407-family.dtsi

   1 /*
   2  * Copyright (C) 2014 STMicroelectronics Limited.
   3  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "stih407-pinctrl.dtsi"
  10 #include <dt-bindings/mfd/st-lpc.h>
  11 #include <dt-bindings/phy/phy.h>
  12 #include <dt-bindings/reset/stih407-resets.h>
  13 #include <dt-bindings/interrupt-controller/irq-st.h>
  14 / {
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17
  18         reserved-memory {
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21                 ranges;
  22
  23                 gp0_reserved: rproc@45000000 {
  24                         compatible = "shared-dma-pool";
  25                         reg = <0x45000000 0x00400000>;
  26                         no-map;
  27                 };
  28
  29                 delta_reserved: rproc@44000000 {
  30                         compatible = "shared-dma-pool";
  31                         reg = <0x44000000 0x01000000>;
  32                         no-map;
  33                 };
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 cpu@0 {
  40                         device_type = "cpu";
  41                         compatible = "arm,cortex-a9";
  42                         reg = <0>;
  43
  44                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  45                         cpu-release-addr = <0x94100A4>;
  46
  47                                          /* kHz     uV   */
  48                         operating-points = <1500000 0
  49                                             1200000 0
  50                                             800000  0
  51                                             500000  0>;
  52
  53                         clocks = <&clk_m_a9>;
  54                         clock-names = "cpu";
  55                         clock-latency = <100000>;
  56                         cpu0-supply = <&pwm_regulator>;
  57                         st,syscfg = <&syscfg_core 0x8e0>;
  58                 };
  59                 cpu@1 {
  60                         device_type = "cpu";
  61                         compatible = "arm,cortex-a9";
  62                         reg = <1>;
  63
  64                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  65                         cpu-release-addr = <0x94100A4>;
  66
  67                                          /* kHz     uV   */
  68                         operating-points = <1500000 0
  69                                             1200000 0
  70                                             800000  0
  71                                             500000  0>;
  72                 };
  73         };
  74
  75         intc: interrupt-controller@08761000 {
  76                 compatible = "arm,cortex-a9-gic";
  77                 #interrupt-cells = <3>;
  78                 interrupt-controller;
  79                 reg = <0x08761000 0x1000>, <0x08760100 0x100>;
  80         };
  81
  82         scu@08760000 {
  83                 compatible = "arm,cortex-a9-scu";
  84                 reg = <0x08760000 0x1000>;
  85         };
  86
  87         timer@08760200 {
  88                 interrupt-parent = <&intc>;
  89                 compatible = "arm,cortex-a9-global-timer";
  90                 reg = <0x08760200 0x100>;
  91                 interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
  92                 clocks = <&arm_periph_clk>;
  93         };
  94
  95         l2: cache-controller {
  96                 compatible = "arm,pl310-cache";
  97                 reg = <0x08762000 0x1000>;
  98                 arm,data-latency = <3 3 3>;
  99                 arm,tag-latency = <2 2 2>;
 100                 cache-unified;
 101                 cache-level = <2>;
 102         };
 103
 104         arm-pmu {
 105                 interrupt-parent = <&intc>;
 106                 compatible = "arm,cortex-a9-pmu";
 107                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 108         };
 109
 110         pwm_regulator: pwm-regulator {
 111                 compatible = "pwm-regulator";
 112                 pwms = <&pwm1 3 8448>;
 113                 regulator-name = "CPU_1V0_AVS";
 114                 regulator-min-microvolt = <784000>;
 115                 regulator-max-microvolt = <1299000>;
 116                 regulator-always-on;
 117                 max-duty-cycle = <255>;
 118                 status = "okay";
 119         };
 120
 121         soc {
 122                 #address-cells = <1>;
 123                 #size-cells = <1>;
 124                 interrupt-parent = <&intc>;
 125                 ranges;
 126                 compatible = "simple-bus";
 127
 128                 restart {
 129                         compatible = "st,stih407-restart";
 130                         st,syscfg = <&syscfg_sbc_reg>;
 131                         status = "okay";
 132                 };
 133
 134                 powerdown: powerdown-controller {
 135                         compatible = "st,stih407-powerdown";
 136                         #reset-cells = <1>;
 137                 };
 138
 139                 softreset: softreset-controller {
 140                         compatible = "st,stih407-softreset";
 141                         #reset-cells = <1>;
 142                 };
 143
 144                 picophyreset: picophyreset-controller {
 145                         compatible = "st,stih407-picophyreset";
 146                         #reset-cells = <1>;
 147                 };
 148
 149                 syscfg_sbc: sbc-syscfg@9620000 {
 150                         compatible = "st,stih407-sbc-syscfg", "syscon";
 151                         reg = <0x9620000 0x1000>;
 152                 };
 153
 154                 syscfg_front: front-syscfg@9280000 {
 155                         compatible = "st,stih407-front-syscfg", "syscon";
 156                         reg = <0x9280000 0x1000>;
 157                 };
 158
 159                 syscfg_rear: rear-syscfg@9290000 {
 160                         compatible = "st,stih407-rear-syscfg", "syscon";
 161                         reg = <0x9290000 0x1000>;
 162                 };
 163
 164                 syscfg_flash: flash-syscfg@92a0000 {
 165                         compatible = "st,stih407-flash-syscfg", "syscon";
 166                         reg = <0x92a0000 0x1000>;
 167                 };
 168
 169                 syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
 170                         compatible = "st,stih407-sbc-reg-syscfg", "syscon";
 171                         reg = <0x9600000 0x1000>;
 172                 };
 173
 174                 syscfg_core: core-syscfg@92b0000 {
 175                         compatible = "st,stih407-core-syscfg", "syscon";
 176                         reg = <0x92b0000 0x1000>;
 177                 };
 178
 179                 syscfg_lpm: lpm-syscfg@94b5100 {
 180                         compatible = "st,stih407-lpm-syscfg", "syscon";
 181                         reg = <0x94b5100 0x1000>;
 182                 };
 183
 184                 irq-syscfg {
 185                         compatible    = "st,stih407-irq-syscfg";
 186                         st,syscfg     = <&syscfg_core>;
 187                         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
 188                                         <ST_IRQ_SYSCFG_PMU_1>;
 189                         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
 190                                         <ST_IRQ_SYSCFG_DISABLED>;
 191                 };
 192
 193                 /* Display */
 194                 vtg_main: sti-vtg-main@8d02800 {
 195                         compatible = "st,vtg";
 196                         reg = <0x8d02800 0x200>;
 197                         interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
 198                 };
 199
 200                 vtg_aux: sti-vtg-aux@8d00200 {
 201                         compatible = "st,vtg";
 202                         reg = <0x8d00200 0x100>;
 203                         interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
 204                 };
 205
 206                 serial@9830000 {
 207                         compatible = "st,asc";
 208                         reg = <0x9830000 0x2c>;
 209                         interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
 210                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 211                         /* Pinctrl moved out to a per-board configuration */
 212
 213                         status = "disabled";
 214                 };
 215
 216                 serial@9831000 {
 217                         compatible = "st,asc";
 218                         reg = <0x9831000 0x2c>;
 219                         interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
 220                         pinctrl-names = "default";
 221                         pinctrl-0 = <&pinctrl_serial1>;
 222                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 223
 224                         status = "disabled";
 225                 };
 226
 227                 serial@9832000 {
 228                         compatible = "st,asc";
 229                         reg = <0x9832000 0x2c>;
 230                         interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
 231                         pinctrl-names = "default";
 232                         pinctrl-0 = <&pinctrl_serial2>;
 233                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 234
 235                         status = "disabled";
 236                 };
 237
 238                 /* SBC_ASC0 - UART10 */
 239                 sbc_serial0: serial@9530000 {
 240                         compatible = "st,asc";
 241                         reg = <0x9530000 0x2c>;
 242                         interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
 243                         pinctrl-names = "default";
 244                         pinctrl-0 = <&pinctrl_sbc_serial0>;
 245                         clocks = <&clk_sysin>;
 246
 247                         status = "disabled";
 248                 };
 249
 250                 serial@9531000 {
 251                         compatible = "st,asc";
 252                         reg = <0x9531000 0x2c>;
 253                         interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
 254                         pinctrl-names = "default";
 255                         pinctrl-0 = <&pinctrl_sbc_serial1>;
 256                         clocks = <&clk_sysin>;
 257
 258                         status = "disabled";
 259                 };
 260
 261                 i2c@9840000 {
 262                         compatible = "st,comms-ssc4-i2c";
 263                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 264                         reg = <0x9840000 0x110>;
 265                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 266                         clock-names = "ssc";
 267                         clock-frequency = <400000>;
 268                         pinctrl-names = "default";
 269                         pinctrl-0 = <&pinctrl_i2c0_default>;
 270                         #address-cells = <1>;
 271                         #size-cells = <0>;
 272
 273                         status = "disabled";
 274                 };
 275
 276                 i2c@9841000 {
 277                         compatible = "st,comms-ssc4-i2c";
 278                         reg = <0x9841000 0x110>;
 279                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 280                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 281                         clock-names = "ssc";
 282                         clock-frequency = <400000>;
 283                         pinctrl-names = "default";
 284                         pinctrl-0 = <&pinctrl_i2c1_default>;
 285                         #address-cells = <1>;
 286                         #size-cells = <0>;
 287
 288                         status = "disabled";
 289                 };
 290
 291                 i2c@9842000 {
 292                         compatible = "st,comms-ssc4-i2c";
 293                         reg = <0x9842000 0x110>;
 294                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 295                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 296                         clock-names = "ssc";
 297                         clock-frequency = <400000>;
 298                         pinctrl-names = "default";
 299                         pinctrl-0 = <&pinctrl_i2c2_default>;
 300                         #address-cells = <1>;
 301                         #size-cells = <0>;
 302
 303                         status = "disabled";
 304                 };
 305
 306                 i2c@9843000 {
 307                         compatible = "st,comms-ssc4-i2c";
 308                         reg = <0x9843000 0x110>;
 309                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 310                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 311                         clock-names = "ssc";
 312                         clock-frequency = <400000>;
 313                         pinctrl-names = "default";
 314                         pinctrl-0 = <&pinctrl_i2c3_default>;
 315                         #address-cells = <1>;
 316                         #size-cells = <0>;
 317
 318                         status = "disabled";
 319                 };
 320
 321                 i2c@9844000 {
 322                         compatible = "st,comms-ssc4-i2c";
 323                         reg = <0x9844000 0x110>;
 324                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 325                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 326                         clock-names = "ssc";
 327                         clock-frequency = <400000>;
 328                         pinctrl-names = "default";
 329                         pinctrl-0 = <&pinctrl_i2c4_default>;
 330                         #address-cells = <1>;
 331                         #size-cells = <0>;
 332
 333                         status = "disabled";
 334                 };
 335
 336                 i2c@9845000 {
 337                         compatible = "st,comms-ssc4-i2c";
 338                         reg = <0x9845000 0x110>;
 339                         interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 340                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 341                         clock-names = "ssc";
 342                         clock-frequency = <400000>;
 343                         pinctrl-names = "default";
 344                         pinctrl-0 = <&pinctrl_i2c5_default>;
 345                         #address-cells = <1>;
 346                         #size-cells = <0>;
 347
 348                         status = "disabled";
 349                 };
 350
 351
 352                 /* SSCs on SBC */
 353                 i2c@9540000 {
 354                         compatible = "st,comms-ssc4-i2c";
 355                         reg = <0x9540000 0x110>;
 356                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 357                         clocks = <&clk_sysin>;
 358                         clock-names = "ssc";
 359                         clock-frequency = <400000>;
 360                         pinctrl-names = "default";
 361                         pinctrl-0 = <&pinctrl_i2c10_default>;
 362                         #address-cells = <1>;
 363                         #size-cells = <0>;
 364
 365                         status = "disabled";
 366                 };
 367
 368                 i2c@9541000 {
 369                         compatible = "st,comms-ssc4-i2c";
 370                         reg = <0x9541000 0x110>;
 371                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 372                         clocks = <&clk_sysin>;
 373                         clock-names = "ssc";
 374                         clock-frequency = <400000>;
 375                         pinctrl-names = "default";
 376                         pinctrl-0 = <&pinctrl_i2c11_default>;
 377                         #address-cells = <1>;
 378                         #size-cells = <0>;
 379
 380                         status = "disabled";
 381                 };
 382
 383                 usb2_picophy0: phy1 {
 384                         compatible = "st,stih407-usb2-phy";
 385                         #phy-cells = <0>;
 386                         st,syscfg = <&syscfg_core 0x100 0xf4>;
 387                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 388                                  <&picophyreset STIH407_PICOPHY2_RESET>;
 389                         reset-names = "global", "port";
 390                 };
 391
 392                 miphy28lp_phy: miphy28lp@9b22000 {
 393                         compatible = "st,miphy28lp-phy";
 394                         st,syscfg = <&syscfg_core>;
 395                         #address-cells  = <1>;
 396                         #size-cells     = <1>;
 397                         ranges;
 398
 399                         phy_port0: port@9b22000 {
 400                                 reg = <0x9b22000 0xff>,
 401                                       <0x9b09000 0xff>,
 402                                       <0x9b04000 0xff>;
 403                                 reg-names = "sata-up",
 404                                             "pcie-up",
 405                                             "pipew";
 406
 407                                 st,syscfg = <0x114 0x818 0xe0 0xec>;
 408                                 #phy-cells = <1>;
 409
 410                                 reset-names = "miphy-sw-rst";
 411                                 resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
 412                         };
 413
 414                         phy_port1: port@9b2a000 {
 415                                 reg = <0x9b2a000 0xff>,
 416                                       <0x9b19000 0xff>,
 417                                       <0x9b14000 0xff>;
 418                                 reg-names = "sata-up",
 419                                             "pcie-up",
 420                                             "pipew";
 421
 422                                 st,syscfg = <0x118 0x81c 0xe4 0xf0>;
 423
 424                                 #phy-cells = <1>;
 425
 426                                 reset-names = "miphy-sw-rst";
 427                                 resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
 428                         };
 429
 430                         phy_port2: port@8f95000 {
 431                                 reg = <0x8f95000 0xff>,
 432                                       <0x8f90000 0xff>;
 433                                 reg-names = "pipew",
 434                                             "usb3-up";
 435
 436                                 st,syscfg = <0x11c 0x820>;
 437
 438                                 #phy-cells = <1>;
 439
 440                                 reset-names = "miphy-sw-rst";
 441                                 resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 442                         };
 443                 };
 444
 445                 spi@9840000 {
 446                         compatible = "st,comms-ssc4-spi";
 447                         reg = <0x9840000 0x110>;
 448                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 449                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 450                         clock-names = "ssc";
 451                         pinctrl-0 = <&pinctrl_spi0_default>;
 452                         pinctrl-names = "default";
 453                         #address-cells = <1>;
 454                         #size-cells = <0>;
 455
 456                         status = "disabled";
 457                 };
 458
 459                 spi@9841000 {
 460                         compatible = "st,comms-ssc4-spi";
 461                         reg = <0x9841000 0x110>;
 462                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 463                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 464                         clock-names = "ssc";
 465                         pinctrl-names = "default";
 466                         pinctrl-0 = <&pinctrl_spi1_default>;
 467
 468                         status = "disabled";
 469                 };
 470
 471                 spi@9842000 {
 472                         compatible = "st,comms-ssc4-spi";
 473                         reg = <0x9842000 0x110>;
 474                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 475                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 476                         clock-names = "ssc";
 477                         pinctrl-names = "default";
 478                         pinctrl-0 = <&pinctrl_spi2_default>;
 479
 480                         status = "disabled";
 481                 };
 482
 483                 spi@9843000 {
 484                         compatible = "st,comms-ssc4-spi";
 485                         reg = <0x9843000 0x110>;
 486                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 487                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 488                         clock-names = "ssc";
 489                         pinctrl-names = "default";
 490                         pinctrl-0 = <&pinctrl_spi3_default>;
 491
 492                         status = "disabled";
 493                 };
 494
 495                 spi@9844000 {
 496                         compatible = "st,comms-ssc4-spi";
 497                         reg = <0x9844000 0x110>;
 498                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 499                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 500                         clock-names = "ssc";
 501                         pinctrl-names = "default";
 502                         pinctrl-0 = <&pinctrl_spi4_default>;
 503
 504                         status = "disabled";
 505                 };
 506
 507                 /* SBC SSC */
 508                 spi@9540000 {
 509                         compatible = "st,comms-ssc4-spi";
 510                         reg = <0x9540000 0x110>;
 511                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 512                         clocks = <&clk_sysin>;
 513                         clock-names = "ssc";
 514                         pinctrl-names = "default";
 515                         pinctrl-0 = <&pinctrl_spi10_default>;
 516
 517                         status = "disabled";
 518                 };
 519
 520                 spi@9541000 {
 521                         compatible = "st,comms-ssc4-spi";
 522                         reg = <0x9541000 0x110>;
 523                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 524                         clocks = <&clk_sysin>;
 525                         clock-names = "ssc";
 526                         pinctrl-names = "default";
 527                         pinctrl-0 = <&pinctrl_spi11_default>;
 528
 529                         status = "disabled";
 530                 };
 531
 532                 spi@9542000 {
 533                         compatible = "st,comms-ssc4-spi";
 534                         reg = <0x9542000 0x110>;
 535                         interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 536                         clocks = <&clk_sysin>;
 537                         clock-names = "ssc";
 538                         pinctrl-names = "default";
 539                         pinctrl-0 = <&pinctrl_spi12_default>;
 540
 541                         status = "disabled";
 542                 };
 543
 544                 mmc0: sdhci@09060000 {
 545                         compatible = "st,sdhci-stih407", "st,sdhci";
 546                         status = "disabled";
 547                         reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
 548                         reg-names = "mmc", "top-mmc-delay";
 549                         interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
 550                         interrupt-names = "mmcirq";
 551                         pinctrl-names = "default";
 552                         pinctrl-0 = <&pinctrl_mmc0>;
 553                         clock-names = "mmc", "icn";
 554                         clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
 555                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 556                         bus-width = <8>;
 557                 };
 558
 559                 mmc1: sdhci@09080000 {
 560                         compatible = "st,sdhci-stih407", "st,sdhci";
 561                         status = "disabled";
 562                         reg = <0x09080000 0x7ff>;
 563                         reg-names = "mmc";
 564                         interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
 565                         interrupt-names = "mmcirq";
 566                         pinctrl-names = "default";
 567                         pinctrl-0 = <&pinctrl_sd1>;
 568                         clock-names = "mmc", "icn";
 569                         clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
 570                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 571                         resets = <&softreset STIH407_MMC1_SOFTRESET>;
 572                         bus-width = <4>;
 573                 };
 574
 575                 /* Watchdog and Real-Time Clock */
 576                 lpc@8787000 {
 577                         compatible = "st,stih407-lpc";
 578                         reg = <0x8787000 0x1000>;
 579                         interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
 580                         clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
 581                         timeout-sec = <120>;
 582                         st,syscfg = <&syscfg_core>;
 583                         st,lpc-mode = <ST_LPC_MODE_WDT>;
 584                 };
 585
 586                 lpc@8788000 {
 587                         compatible = "st,stih407-lpc";
 588                         reg = <0x8788000 0x1000>;
 589                         interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
 590                         clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
 591                         st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 592                 };
 593
 594                 sata0: sata@9b20000 {
 595                         compatible = "st,ahci";
 596                         reg = <0x9b20000 0x1000>;
 597
 598                         interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
 599                         interrupt-names = "hostc";
 600
 601                         phys = <&phy_port0 PHY_TYPE_SATA>;
 602                         phy-names = "ahci_phy";
 603
 604                         resets = <&powerdown STIH407_SATA0_POWERDOWN>,
 605                                  <&softreset STIH407_SATA0_SOFTRESET>,
 606                                  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
 607                         reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
 608
 609                         clock-names = "ahci_clk";
 610                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 611
 612                         ports-implemented = <0x1>;
 613
 614                         status = "disabled";
 615                 };
 616
 617                 sata1: sata@9b28000 {
 618                         compatible = "st,ahci";
 619                         reg = <0x9b28000 0x1000>;
 620
 621                         interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
 622                         interrupt-names = "hostc";
 623
 624                         phys = <&phy_port1 PHY_TYPE_SATA>;
 625                         phy-names = "ahci_phy";
 626
 627                         resets = <&powerdown STIH407_SATA1_POWERDOWN>,
 628                                  <&softreset STIH407_SATA1_SOFTRESET>,
 629                                  <&softreset STIH407_SATA1_PWR_SOFTRESET>;
 630                         reset-names = "pwr-dwn",
 631                                       "sw-rst",
 632                                       "pwr-rst";
 633
 634                         clock-names = "ahci_clk";
 635                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 636
 637                         ports-implemented = <0x1>;
 638
 639                         status = "disabled";
 640                 };
 641
 642
 643                 st_dwc3: dwc3@8f94000 {
 644                         compatible      = "st,stih407-dwc3";
 645                         reg             = <0x08f94000 0x1000>, <0x110 0x4>;
 646                         reg-names       = "reg-glue", "syscfg-reg";
 647                         st,syscfg       = <&syscfg_core>;
 648                         resets          = <&powerdown STIH407_USB3_POWERDOWN>,
 649                                           <&softreset STIH407_MIPHY2_SOFTRESET>;
 650                         reset-names     = "powerdown", "softreset";
 651                         #address-cells  = <1>;
 652                         #size-cells     = <1>;
 653                         pinctrl-names   = "default";
 654                         pinctrl-0       = <&pinctrl_usb3>;
 655                         ranges;
 656
 657                         status = "disabled";
 658
 659                         dwc3: dwc3@9900000 {
 660                                 compatible      = "snps,dwc3";
 661                                 reg             = <0x09900000 0x100000>;
 662                                 interrupts      = <GIC_SPI 155 IRQ_TYPE_NONE>;
 663                                 dr_mode         = "host";
 664                                 phy-names       = "usb2-phy", "usb3-phy";
 665                                 phys            = <&usb2_picophy0>,
 666                                                   <&phy_port2 PHY_TYPE_USB3>;
 667                                 snps,dis_u3_susphy_quirk;
 668                         };
 669                 };
 670
 671                 /* COMMS PWM Module */
 672                 pwm0: pwm@9810000 {
 673                         compatible      = "st,sti-pwm";
 674                         #pwm-cells      = <2>;
 675                         reg             = <0x9810000 0x68>;
 676                         interrupts      = <GIC_SPI 128 IRQ_TYPE_NONE>;
 677                         pinctrl-names   = "default";
 678                         pinctrl-0       = <&pinctrl_pwm0_chan0_default>;
 679                         clock-names     = "pwm";
 680                         clocks          = <&clk_sysin>;
 681                         st,pwm-num-chan = <1>;
 682
 683                         status          = "disabled";
 684                 };
 685
 686                 /* SBC PWM Module */
 687                 pwm1: pwm@9510000 {
 688                         compatible      = "st,sti-pwm";
 689                         #pwm-cells      = <2>;
 690                         reg             = <0x9510000 0x68>;
 691                         interrupts      = <GIC_SPI 131 IRQ_TYPE_NONE>;
 692                         pinctrl-names   = "default";
 693                         pinctrl-0       = <&pinctrl_pwm1_chan0_default
 694                                         &pinctrl_pwm1_chan1_default
 695                                         &pinctrl_pwm1_chan2_default
 696                                         &pinctrl_pwm1_chan3_default>;
 697                         clock-names     = "pwm";
 698                         clocks          = <&clk_sysin>;
 699                         st,pwm-num-chan = <4>;
 700
 701                         status          = "disabled";
 702                 };
 703
 704                 rng10: rng@08a89000 {
 705                         compatible      = "st,rng";
 706                         reg             = <0x08a89000 0x1000>;
 707                         clocks          = <&clk_sysin>;
 708                         status          = "okay";
 709                 };
 710
 711                 rng11: rng@08a8a000 {
 712                         compatible      = "st,rng";
 713                         reg             = <0x08a8a000 0x1000>;
 714                         clocks          = <&clk_sysin>;
 715                         status          = "okay";
 716                 };
 717
 718                 ethernet0: dwmac@9630000 {
 719                         device_type = "network";
 720                         status = "disabled";
 721                         compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
 722                         reg = <0x9630000 0x8000>, <0x80 0x4>;
 723                         reg-names = "stmmaceth", "sti-ethconf";
 724
 725                         st,syscon = <&syscfg_sbc_reg 0x80>;
 726                         st,gmac_en;
 727                         resets = <&softreset STIH407_ETH1_SOFTRESET>;
 728                         reset-names = "stmmaceth";
 729
 730                         interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
 731                                      <GIC_SPI 99 IRQ_TYPE_NONE>;
 732                         interrupt-names = "macirq", "eth_wake_irq";
 733
 734                         /* DMA Bus Mode */
 735                         snps,pbl = <8>;
 736
 737                         pinctrl-names = "default";
 738                         pinctrl-0 = <&pinctrl_rgmii1>;
 739
 740                         clock-names = "stmmaceth", "sti-ethclk";
 741                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 742                                  <&clk_s_c0_flexgen CLK_ETH_PHY>;
 743                 };
 744
 745                 cec: sti-cec@094a087c {
 746                         compatible = "st,stih-cec";
 747                         reg = <0x94a087c 0x64>;
 748                         clocks = <&clk_sysin>;
 749                         clock-names = "cec-clk";
 750                         interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
 751                         interrupt-names = "cec-irq";
 752                         pinctrl-names = "default";
 753                         pinctrl-0 = <&pinctrl_cec0_default>;
 754                         resets = <&softreset STIH407_LPM_SOFTRESET>;
 755                 };
 756
 757                 rng10: rng@08a89000 {
 758                         compatible      = "st,rng";
 759                         reg             = <0x08a89000 0x1000>;
 760                         clocks          = <&clk_sysin>;
 761                         status          = "okay";
 762                 };
 763
 764                 rng11: rng@08a8a000 {
 765                         compatible      = "st,rng";
 766                         reg             = <0x08a8a000 0x1000>;
 767                         clocks          = <&clk_sysin>;
 768                         status          = "okay";
 769                 };
 770
 771                 mailbox0: mailbox@8f00000  {
 772                         compatible      = "st,stih407-mailbox";
 773                         reg             = <0x8f00000 0x1000>;
 774                         interrupts      = <GIC_SPI 1 IRQ_TYPE_NONE>;
 775                         #mbox-cells     = <2>;
 776                         mbox-name       = "a9";
 777                         status          = "okay";
 778                 };
 779
 780                 mailbox1: mailbox@8f01000 {
 781                         compatible      = "st,stih407-mailbox";
 782                         reg             = <0x8f01000 0x1000>;
 783                         #mbox-cells     = <2>;
 784                         mbox-name       = "st231_gp_1";
 785                         status          = "okay";
 786                 };
 787
 788                 mailbox2: mailbox@8f02000 {
 789                         compatible      = "st,stih407-mailbox";
 790                         reg             = <0x8f02000 0x1000>;
 791                         #mbox-cells     = <2>;
 792                         mbox-name       = "st231_gp_0";
 793                         status          = "okay";
 794                 };
 795
 796                 mailbox3: mailbox@8f03000 {
 797                         compatible      = "st,stih407-mailbox";
 798                         reg             = <0x8f03000 0x1000>;
 799                         #mbox-cells     = <2>;
 800                         mbox-name       = "st231_audio_video";
 801                         status          = "okay";
 802                 };
 803
 804                 st231_gp0: remote-processor {
 805                         compatible      = "st,st231-rproc";
 806                         memory-region   = <&gp0_reserved>;
 807                         resets          = <&softreset STIH407_ST231_GP0_SOFTRESET>;
 808                         reset-names     = "sw_reset";
 809                         clocks          = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
 810                         clock-frequency = <600000000>;
 811                         st,syscfg       = <&syscfg_core 0x22c>;
 812                         #mbox-cells = <1>;
 813                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 814                         mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
 815                 };
 816
 817                 st231_delta: remote-processor {
 818                         compatible      = "st,st231-rproc";
 819                         memory-region   = <&delta_reserved>;
 820                         resets          = <&softreset STIH407_ST231_DMU_SOFTRESET>;
 821                         reset-names     = "sw_reset";
 822                         clocks          = <&clk_s_c0_flexgen CLK_ST231_DMU>;
 823                         clock-frequency = <600000000>;
 824                         st,syscfg       = <&syscfg_core 0x224>;
 825                         #mbox-cells = <1>;
 826                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 827                         mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
 828                 };
 829
 830                 /* fdma audio */
 831                 fdma0: dma-controller@8e20000 {
 832                         compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
 833                         reg = <0x8e20000 0x8000>,
 834                               <0x8e30000 0x3000>,
 835                               <0x8e37000 0x1000>,
 836                               <0x8e38000 0x8000>;
 837                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 838                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 839                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 840                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 841                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 842                         interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
 843                         dma-channels = <16>;
 844                         #dma-cells = <3>;
 845                 };
 846
 847                 /* fdma app */
 848                 fdma1: dma-controller@8e40000 {
 849                         compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
 850                         reg = <0x8e40000 0x8000>,
 851                               <0x8e50000 0x3000>,
 852                               <0x8e57000 0x1000>,
 853                               <0x8e58000 0x8000>;
 854                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 855                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 856                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
 857                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
 858                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 859
 860                         interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
 861                         dma-channels = <16>;
 862                         #dma-cells = <3>;
 863
 864                         status = "disabled";
 865                 };
 866
 867                 /* fdma free running */
 868                 fdma2: dma-controller@8e60000 {
 869                         compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
 870                         reg = <0x8e60000 0x8000>,
 871                               <0x8e70000 0x3000>,
 872                               <0x8e77000 0x1000>,
 873                               <0x8e78000 0x8000>;
 874                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 875                         interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
 876                         dma-channels = <16>;
 877                         #dma-cells = <3>;
 878                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 879                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 880                                 <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
 881                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 882
 883                         status = "disabled";
 884                 };
 885
 886                 sti_sasg_codec: sti-sasg-codec {
 887                         compatible = "st,stih407-sas-codec";
 888                         #sound-dai-cells = <1>;
 889                         status = "disabled";
 890                         st,syscfg = <&syscfg_core>;
 891                 };
 892
 893                 sti_uni_player0: sti-uni-player@8d80000 {
 894                         compatible = "st,stih407-uni-player-hdmi";
 895                         #sound-dai-cells = <0>;
 896                         st,syscfg = <&syscfg_core>;
 897                         clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
 898                         assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
 899                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
 900                         assigned-clock-rates = <50000000>;
 901                         reg = <0x8d80000 0x158>;
 902                         interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
 903                         dmas = <&fdma0 2 0 1>;
 904                         dma-names = "tx";
 905
 906                         status          = "disabled";
 907                 };
 908
 909                 sti_uni_player1: sti-uni-player@8d81000 {
 910                         compatible = "st,stih407-uni-player-pcm-out";
 911                         #sound-dai-cells = <0>;
 912                         st,syscfg = <&syscfg_core>;
 913                         clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
 914                         assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
 915                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
 916                         assigned-clock-rates = <50000000>;
 917                         reg = <0x8d81000 0x158>;
 918                         interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
 919                         dmas = <&fdma0 3 0 1>;
 920                         dma-names = "tx";
 921
 922                         status = "disabled";
 923                 };
 924
 925                 sti_uni_player2: sti-uni-player@8d82000 {
 926                         compatible = "st,stih407-uni-player-dac";
 927                         #sound-dai-cells = <0>;
 928                         st,syscfg = <&syscfg_core>;
 929                         clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
 930                         assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
 931                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
 932                         assigned-clock-rates = <50000000>;
 933                         reg = <0x8d82000 0x158>;
 934                         interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 935                         dmas = <&fdma0 4 0 1>;
 936                         dma-names = "tx";
 937
 938                         status = "disabled";
 939                 };
 940
 941                 sti_uni_player3: sti-uni-player@8d85000 {
 942                         compatible = "st,stih407-uni-player-spdif";
 943                         #sound-dai-cells = <0>;
 944                         st,syscfg = <&syscfg_core>;
 945                         clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
 946                         assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
 947                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
 948                         assigned-clock-rates = <50000000>;
 949                         reg = <0x8d85000 0x158>;
 950                         interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 951                         dmas = <&fdma0 7 0 1>;
 952                         dma-names = "tx";
 953
 954                         status = "disabled";
 955                 };
 956
 957                 sti_uni_reader0: sti-uni-reader@8d83000 {
 958                         compatible = "st,stih407-uni-reader-pcm_in";
 959                         #sound-dai-cells = <0>;
 960                         st,syscfg = <&syscfg_core>;
 961                         reg = <0x8d83000 0x158>;
 962                         interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
 963                         dmas = <&fdma0 5 0 1>;
 964                         dma-names = "rx";
 965
 966                         status = "disabled";
 967                 };
 968
 969                 sti_uni_reader1: sti-uni-reader@8d84000 {
 970                         compatible = "st,stih407-uni-reader-hdmi";
 971                         #sound-dai-cells = <0>;
 972                         st,syscfg = <&syscfg_core>;
 973                         reg = <0x8d84000 0x158>;
 974                         interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
 975                         dmas = <&fdma0 6 0 1>;
 976                         dma-names = "rx";
 977
 978                         status = "disabled";
 979                 };
 980
 981                 delta0 {
 982                         compatible = "st,st-delta";
 983                         clock-names = "delta",
 984                                       "delta-st231",
 985                                       "delta-flash-promip";
 986                         clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
 987                                  <&clk_s_c0_flexgen CLK_ST231_DMU>,
 988                                  <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
 989                 };
 990         };
 991 };