arch/arm/boot/dts/spear1310.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * DTS file for all SPEAr1310 SoCs
   4  *
   5  * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
   6  */
   7
   8 /include/ "spear13xx.dtsi"
   9
  10 / {
  11         compatible = "st,spear1310";
  12
  13         ahb {
  14                 spics: spics@e0700000{
  15                         compatible = "st,spear-spics-gpio";
  16                         reg = <0xe0700000 0x1000>;
  17                         st-spics,peripcfg-reg = <0x3b0>;
  18                         st-spics,sw-enable-bit = <12>;
  19                         st-spics,cs-value-bit = <11>;
  20                         st-spics,cs-enable-mask = <3>;
  21                         st-spics,cs-enable-shift = <8>;
  22                         gpio-controller;
  23                         #gpio-cells = <2>;
  24                 };
  25
  26                 miphy0: miphy@eb800000 {
  27                         compatible = "st,spear1310-miphy";
  28                         reg = <0xeb800000 0x4000>;
  29                         misc = <&misc>;
  30                         phy-id = <0>;
  31                         #phy-cells = <1>;
  32                         status = "disabled";
  33                 };
  34
  35                 miphy1: miphy@eb804000 {
  36                         compatible = "st,spear1310-miphy";
  37                         reg = <0xeb804000 0x4000>;
  38                         misc = <&misc>;
  39                         phy-id = <1>;
  40                         #phy-cells = <1>;
  41                         status = "disabled";
  42                 };
  43
  44                 miphy2: miphy@eb808000 {
  45                         compatible = "st,spear1310-miphy";
  46                         reg = <0xeb808000 0x4000>;
  47                         misc = <&misc>;
  48                         phy-id = <2>;
  49                         #phy-cells = <1>;
  50                         status = "disabled";
  51                 };
  52
  53                 ahci0: ahci@b1000000 {
  54                         compatible = "snps,spear-ahci";
  55                         reg = <0xb1000000 0x10000>;
  56                         interrupts = <0 68 0x4>;
  57                         phys = <&miphy0 0>;
  58                         phy-names = "sata-phy";
  59                         status = "disabled";
  60                 };
  61
  62                 ahci1: ahci@b1800000 {
  63                         compatible = "snps,spear-ahci";
  64                         reg = <0xb1800000 0x10000>;
  65                         interrupts = <0 69 0x4>;
  66                         phys = <&miphy1 0>;
  67                         phy-names = "sata-phy";
  68                         status = "disabled";
  69                 };
  70
  71                 ahci2: ahci@b4000000 {
  72                         compatible = "snps,spear-ahci";
  73                         reg = <0xb4000000 0x10000>;
  74                         interrupts = <0 70 0x4>;
  75                         phys = <&miphy2 0>;
  76                         phy-names = "sata-phy";
  77                         status = "disabled";
  78                 };
  79
  80                 pcie0: pcie@b1000000 {
  81                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
  82                         reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
  83                         reg-names = "dbi", "config";
  84                         interrupts = <0 68 0x4>;
  85                         interrupt-map-mask = <0 0 0 0>;
  86                         interrupt-map = <0x0 0 &gic 0 68 0x4>;
  87                         num-lanes = <1>;
  88                         phys = <&miphy0 1>;
  89                         phy-names = "pcie-phy";
  90                         #address-cells = <3>;
  91                         #size-cells = <2>;
  92                         device_type = "pci";
  93                         ranges = <0x81000000 0 0         0x80020000 0 0x00010000   /* downstream I/O */
  94                                 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
  95                         bus-range = <0x00 0xff>;
  96                         status = "disabled";
  97                 };
  98
  99                 pcie1: pcie@b1800000 {
 100                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
 101                         reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
 102                         reg-names = "dbi", "config";
 103                         interrupts = <0 69 0x4>;
 104                         interrupt-map-mask = <0 0 0 0>;
 105                         interrupt-map = <0x0 0 &gic 0 69 0x4>;
 106                         num-lanes = <1>;
 107                         phys = <&miphy1 1>;
 108                         phy-names = "pcie-phy";
 109                         #address-cells = <3>;
 110                         #size-cells = <2>;
 111                         device_type = "pci";
 112                         ranges = <0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
 113                                 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
 114                         bus-range = <0x00 0xff>;
 115                         status = "disabled";
 116                 };
 117
 118                 pcie2: pcie@b4000000 {
 119                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
 120                         reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
 121                         reg-names = "dbi", "config";
 122                         interrupts = <0 70 0x4>;
 123                         interrupt-map-mask = <0 0 0 0>;
 124                         interrupt-map = <0x0 0 &gic 0 70 0x4>;
 125                         num-lanes = <1>;
 126                         phys = <&miphy2 1>;
 127                         phy-names = "pcie-phy";
 128                         #address-cells = <3>;
 129                         #size-cells = <2>;
 130                         device_type = "pci";
 131                         ranges = <0x81000000 0 0         0xc0020000 0 0x00010000   /* downstream I/O */
 132                                 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
 133                         bus-range = <0x00 0xff>;
 134                         status = "disabled";
 135                 };
 136
 137                 gmac1: eth@5c400000 {
 138                         compatible = "st,spear600-gmac";
 139                         reg = <0x5c400000 0x8000>;
 140                         interrupts = <0 95 0x4>;
 141                         interrupt-names = "macirq";
 142                         phy-mode = "mii";
 143                         status = "disabled";
 144                 };
 145
 146                 gmac2: eth@5c500000 {
 147                         compatible = "st,spear600-gmac";
 148                         reg = <0x5c500000 0x8000>;
 149                         interrupts = <0 96 0x4>;
 150                         interrupt-names = "macirq";
 151                         phy-mode = "mii";
 152                         status = "disabled";
 153                 };
 154
 155                 gmac3: eth@5c600000 {
 156                         compatible = "st,spear600-gmac";
 157                         reg = <0x5c600000 0x8000>;
 158                         interrupts = <0 97 0x4>;
 159                         interrupt-names = "macirq";
 160                         phy-mode = "rmii";
 161                         status = "disabled";
 162                 };
 163
 164                 gmac4: eth@5c700000 {
 165                         compatible = "st,spear600-gmac";
 166                         reg = <0x5c700000 0x8000>;
 167                         interrupts = <0 98 0x4>;
 168                         interrupt-names = "macirq";
 169                         phy-mode = "rgmii";
 170                         status = "disabled";
 171                 };
 172
 173                 pinmux: pinmux@e0700000 {
 174                         compatible = "st,spear1310-pinmux";
 175                         reg = <0xe0700000 0x1000>;
 176                         #gpio-range-cells = <3>;
 177                 };
 178
 179                 apb {
 180                         i2c1: i2c@5cd00000 {
 181                                 #address-cells = <1>;
 182                                 #size-cells = <0>;
 183                                 compatible = "snps,designware-i2c";
 184                                 reg = <0x5cd00000 0x1000>;
 185                                 interrupts = <0 87 0x4>;
 186                                 status = "disabled";
 187                         };
 188
 189                         i2c2: i2c@5ce00000 {
 190                                 #address-cells = <1>;
 191                                 #size-cells = <0>;
 192                                 compatible = "snps,designware-i2c";
 193                                 reg = <0x5ce00000 0x1000>;
 194                                 interrupts = <0 88 0x4>;
 195                                 status = "disabled";
 196                         };
 197
 198                         i2c3: i2c@5cf00000 {
 199                                 #address-cells = <1>;
 200                                 #size-cells = <0>;
 201                                 compatible = "snps,designware-i2c";
 202                                 reg = <0x5cf00000 0x1000>;
 203                                 interrupts = <0 89 0x4>;
 204                                 status = "disabled";
 205                         };
 206
 207                         i2c4: i2c@5d000000 {
 208                                 #address-cells = <1>;
 209                                 #size-cells = <0>;
 210                                 compatible = "snps,designware-i2c";
 211                                 reg = <0x5d000000 0x1000>;
 212                                 interrupts = <0 90 0x4>;
 213                                 status = "disabled";
 214                         };
 215
 216                         i2c5: i2c@5d100000 {
 217                                 #address-cells = <1>;
 218                                 #size-cells = <0>;
 219                                 compatible = "snps,designware-i2c";
 220                                 reg = <0x5d100000 0x1000>;
 221                                 interrupts = <0 91 0x4>;
 222                                 status = "disabled";
 223                         };
 224
 225                         i2c6: i2c@5d200000 {
 226                                 #address-cells = <1>;
 227                                 #size-cells = <0>;
 228                                 compatible = "snps,designware-i2c";
 229                                 reg = <0x5d200000 0x1000>;
 230                                 interrupts = <0 92 0x4>;
 231                                 status = "disabled";
 232                         };
 233
 234                         i2c7: i2c@5d300000 {
 235                                 #address-cells = <1>;
 236                                 #size-cells = <0>;
 237                                 compatible = "snps,designware-i2c";
 238                                 reg = <0x5d300000 0x1000>;
 239                                 interrupts = <0 93 0x4>;
 240                                 status = "disabled";
 241                         };
 242
 243                         spi1: spi@5d400000 {
 244                                 compatible = "arm,pl022", "arm,primecell";
 245                                 reg = <0x5d400000 0x1000>;
 246                                 interrupts = <0 99 0x4>;
 247                                 #address-cells = <1>;
 248                                 #size-cells = <0>;
 249                                 status = "disabled";
 250                         };
 251
 252                         serial@5c800000 {
 253                                 compatible = "arm,pl011", "arm,primecell";
 254                                 reg = <0x5c800000 0x1000>;
 255                                 interrupts = <0 82 0x4>;
 256                                 status = "disabled";
 257                         };
 258
 259                         serial@5c900000 {
 260                                 compatible = "arm,pl011", "arm,primecell";
 261                                 reg = <0x5c900000 0x1000>;
 262                                 interrupts = <0 83 0x4>;
 263                                 status = "disabled";
 264                         };
 265
 266                         serial@5ca00000 {
 267                                 compatible = "arm,pl011", "arm,primecell";
 268                                 reg = <0x5ca00000 0x1000>;
 269                                 interrupts = <0 84 0x4>;
 270                                 status = "disabled";
 271                         };
 272
 273                         serial@5cb00000 {
 274                                 compatible = "arm,pl011", "arm,primecell";
 275                                 reg = <0x5cb00000 0x1000>;
 276                                 interrupts = <0 85 0x4>;
 277                                 status = "disabled";
 278                         };
 279
 280                         serial@5cc00000 {
 281                                 compatible = "arm,pl011", "arm,primecell";
 282                                 reg = <0x5cc00000 0x1000>;
 283                                 interrupts = <0 86 0x4>;
 284                                 status = "disabled";
 285                         };
 286
 287                         thermal@e07008c4 {
 288                                 st,thermal-flags = <0x7000>;
 289                         };
 290
 291                         gpiopinctrl: gpio@d8400000 {
 292                                 compatible = "st,spear-plgpio";
 293                                 reg = <0xd8400000 0x1000>;
 294                                 interrupts = <0 100 0x4>;
 295                                 #interrupt-cells = <1>;
 296                                 interrupt-controller;
 297                                 gpio-controller;
 298                                 #gpio-cells = <2>;
 299                                 gpio-ranges = <&pinmux 0 0 246>;
 300                                 status = "disabled";
 301
 302                                 st-plgpio,ngpio = <246>;
 303                                 st-plgpio,enb-reg = <0xd0>;
 304                                 st-plgpio,wdata-reg = <0x90>;
 305                                 st-plgpio,dir-reg = <0xb0>;
 306                                 st-plgpio,ie-reg = <0x30>;
 307                                 st-plgpio,rdata-reg = <0x70>;
 308                                 st-plgpio,mis-reg = <0x10>;
 309                                 st-plgpio,eit-reg = <0x50>;
 310                         };
 311                 };
 312         };
 313 };