arch/arm/boot/dts/r8a7791-koelsch.dts

   1 /*
   2  * Device Tree Source for the Koelsch board
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7791.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Koelsch";
  48         compatible = "renesas,koelsch", "renesas,r8a7791";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scif1;
  53                 i2c9 = &gpioi2c1;
  54                 i2c10 = &gpioi2c2;
  55                 i2c11 = &gpioi2c4;
  56                 i2c12 = &i2cexio1;
  57                 i2c13 = &i2chdmi;
  58                 i2c14 = &i2cexio4;
  59         };
  60
  61         chosen {
  62                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  63                 stdout-path = "serial0:115200n8";
  64         };
  65
  66         memory@40000000 {
  67                 device_type = "memory";
  68                 reg = <0 0x40000000 0 0x40000000>;
  69         };
  70
  71         memory@200000000 {
  72                 device_type = "memory";
  73                 reg = <2 0x00000000 0 0x40000000>;
  74         };
  75
  76         lbsc {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79         };
  80
  81         keyboard {
  82                 compatible = "gpio-keys";
  83
  84                 key-1 {
  85                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_1>;
  87                         label = "SW2-1";
  88                         wakeup-source;
  89                         debounce-interval = <20>;
  90                 };
  91                 key-2 {
  92                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_2>;
  94                         label = "SW2-2";
  95                         wakeup-source;
  96                         debounce-interval = <20>;
  97                 };
  98                 key-3 {
  99                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_3>;
 101                         label = "SW2-3";
 102                         wakeup-source;
 103                         debounce-interval = <20>;
 104                 };
 105                 key-4 {
 106                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 107                         linux,code = <KEY_4>;
 108                         label = "SW2-4";
 109                         wakeup-source;
 110                         debounce-interval = <20>;
 111                 };
 112                 key-a {
 113                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_A>;
 115                         label = "SW30";
 116                         wakeup-source;
 117                         debounce-interval = <20>;
 118                 };
 119                 key-b {
 120                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_B>;
 122                         label = "SW31";
 123                         wakeup-source;
 124                         debounce-interval = <20>;
 125                 };
 126                 key-c {
 127                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_C>;
 129                         label = "SW32";
 130                         wakeup-source;
 131                         debounce-interval = <20>;
 132                 };
 133                 key-d {
 134                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_D>;
 136                         label = "SW33";
 137                         wakeup-source;
 138                         debounce-interval = <20>;
 139                 };
 140                 key-e {
 141                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_E>;
 143                         label = "SW34";
 144                         wakeup-source;
 145                         debounce-interval = <20>;
 146                 };
 147                 key-f {
 148                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 149                         linux,code = <KEY_F>;
 150                         label = "SW35";
 151                         wakeup-source;
 152                         debounce-interval = <20>;
 153                 };
 154                 key-g {
 155                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 156                         linux,code = <KEY_G>;
 157                         label = "SW36";
 158                         wakeup-source;
 159                         debounce-interval = <20>;
 160                 };
 161         };
 162
 163         leds {
 164                 compatible = "gpio-leds";
 165                 led6 {
 166                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 167                         label = "LED6";
 168                 };
 169                 led7 {
 170                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 171                         label = "LED7";
 172                 };
 173                 led8 {
 174                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 175                         label = "LED8";
 176                 };
 177         };
 178
 179         vcc_sdhi0: regulator-vcc-sdhi0 {
 180                 compatible = "regulator-fixed";
 181
 182                 regulator-name = "SDHI0 Vcc";
 183                 regulator-min-microvolt = <3300000>;
 184                 regulator-max-microvolt = <3300000>;
 185
 186                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 187                 enable-active-high;
 188         };
 189
 190         vccq_sdhi0: regulator-vccq-sdhi0 {
 191                 compatible = "regulator-gpio";
 192
 193                 regulator-name = "SDHI0 VccQ";
 194                 regulator-min-microvolt = <1800000>;
 195                 regulator-max-microvolt = <3300000>;
 196
 197                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 198                 gpios-states = <1>;
 199                 states = <3300000 1
 200                           1800000 0>;
 201         };
 202
 203         vcc_sdhi1: regulator-vcc-sdhi1 {
 204                 compatible = "regulator-fixed";
 205
 206                 regulator-name = "SDHI1 Vcc";
 207                 regulator-min-microvolt = <3300000>;
 208                 regulator-max-microvolt = <3300000>;
 209
 210                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 211                 enable-active-high;
 212         };
 213
 214         vccq_sdhi1: regulator-vccq-sdhi1 {
 215                 compatible = "regulator-gpio";
 216
 217                 regulator-name = "SDHI1 VccQ";
 218                 regulator-min-microvolt = <1800000>;
 219                 regulator-max-microvolt = <3300000>;
 220
 221                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 222                 gpios-states = <1>;
 223                 states = <3300000 1
 224                           1800000 0>;
 225         };
 226
 227         vcc_sdhi2: regulator-vcc-sdhi2 {
 228                 compatible = "regulator-fixed";
 229
 230                 regulator-name = "SDHI2 Vcc";
 231                 regulator-min-microvolt = <3300000>;
 232                 regulator-max-microvolt = <3300000>;
 233
 234                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 235                 enable-active-high;
 236         };
 237
 238         vccq_sdhi2: regulator-vccq-sdhi2 {
 239                 compatible = "regulator-gpio";
 240
 241                 regulator-name = "SDHI2 VccQ";
 242                 regulator-min-microvolt = <1800000>;
 243                 regulator-max-microvolt = <3300000>;
 244
 245                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 246                 gpios-states = <1>;
 247                 states = <3300000 1
 248                           1800000 0>;
 249         };
 250
 251         audio_clock: audio_clock {
 252                 compatible = "fixed-clock";
 253                 #clock-cells = <0>;
 254                 clock-frequency = <11289600>;
 255         };
 256
 257         rsnd_ak4643: sound {
 258                 compatible = "simple-audio-card";
 259
 260                 simple-audio-card,format = "left_j";
 261                 simple-audio-card,bitclock-master = <&sndcodec>;
 262                 simple-audio-card,frame-master = <&sndcodec>;
 263
 264                 sndcpu: simple-audio-card,cpu {
 265                         sound-dai = <&rcar_sound>;
 266                 };
 267
 268                 sndcodec: simple-audio-card,codec {
 269                         sound-dai = <&ak4643>;
 270                         clocks = <&audio_clock>;
 271                 };
 272         };
 273
 274         hdmi-in {
 275                 compatible = "hdmi-connector";
 276                 type = "a";
 277
 278                 port {
 279                         hdmi_con_in: endpoint {
 280                                 remote-endpoint = <&adv7612_in>;
 281                         };
 282                 };
 283         };
 284
 285         cec_clock: cec-clock {
 286                 compatible = "fixed-clock";
 287                 #clock-cells = <0>;
 288                 clock-frequency = <12000000>;
 289         };
 290
 291         hdmi-out {
 292                 compatible = "hdmi-connector";
 293                 type = "a";
 294
 295                 port {
 296                         hdmi_con_out: endpoint {
 297                                 remote-endpoint = <&adv7511_out>;
 298                         };
 299                 };
 300         };
 301
 302         x2_clk: x2-clock {
 303                 compatible = "fixed-clock";
 304                 #clock-cells = <0>;
 305                 clock-frequency = <74250000>;
 306         };
 307
 308         x13_clk: x13-clock {
 309                 compatible = "fixed-clock";
 310                 #clock-cells = <0>;
 311                 clock-frequency = <148500000>;
 312         };
 313
 314         gpioi2c1: i2c-9 {
 315                 #address-cells = <1>;
 316                 #size-cells = <0>;
 317                 compatible = "i2c-gpio";
 318                 status = "disabled";
 319                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 320                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 321                 i2c-gpio,delay-us = <5>;
 322         };
 323
 324         gpioi2c2: i2c-10 {
 325                 #address-cells = <1>;
 326                 #size-cells = <0>;
 327                 compatible = "i2c-gpio";
 328                 status = "disabled";
 329                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 330                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 331                 i2c-gpio,delay-us = <5>;
 332         };
 333
 334         gpioi2c4: i2c-11 {
 335                 #address-cells = <1>;
 336                 #size-cells = <0>;
 337                 compatible = "i2c-gpio";
 338                 status = "disabled";
 339                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 340                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 341                 i2c-gpio,delay-us = <5>;
 342         };
 343
 344         /*
 345          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 346          * A fallback to GPIO is provided.
 347          */
 348         i2cexio1: i2c-12 {
 349                 compatible = "i2c-demux-pinctrl";
 350                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 351                 i2c-bus-name = "i2c-exio1";
 352                 #address-cells = <1>;
 353                 #size-cells = <0>;
 354         };
 355
 356         /*
 357          * A fallback to GPIO is provided for I2C2.
 358          */
 359         i2chdmi: i2c-13 {
 360                 compatible = "i2c-demux-pinctrl";
 361                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 362                 i2c-bus-name = "i2c-hdmi";
 363                 #address-cells = <1>;
 364                 #size-cells = <0>;
 365
 366                 ak4643: codec@12 {
 367                         compatible = "asahi-kasei,ak4643";
 368                         #sound-dai-cells = <0>;
 369                         reg = <0x12>;
 370                 };
 371
 372                 composite-in@20 {
 373                         compatible = "adi,adv7180";
 374                         reg = <0x20>;
 375                         remote = <&vin1>;
 376
 377                         port {
 378                                 adv7180: endpoint {
 379                                         bus-width = <8>;
 380                                         remote-endpoint = <&vin1ep>;
 381                                 };
 382                         };
 383                 };
 384
 385                 hdmi@39 {
 386                         compatible = "adi,adv7511w";
 387                         reg = <0x39>;
 388                         interrupt-parent = <&gpio3>;
 389                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 390                         clocks = <&cec_clock>;
 391                         clock-names = "cec";
 392
 393                         adi,input-depth = <8>;
 394                         adi,input-colorspace = "rgb";
 395                         adi,input-clock = "1x";
 396                         adi,input-style = <1>;
 397                         adi,input-justification = "evenly";
 398
 399                         ports {
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402
 403                                 port@0 {
 404                                         reg = <0>;
 405                                         adv7511_in: endpoint {
 406                                                 remote-endpoint = <&du_out_rgb>;
 407                                         };
 408                                 };
 409
 410                                 port@1 {
 411                                         reg = <1>;
 412                                         adv7511_out: endpoint {
 413                                                 remote-endpoint = <&hdmi_con_out>;
 414                                         };
 415                                 };
 416                         };
 417                 };
 418
 419                 hdmi-in@4c {
 420                         compatible = "adi,adv7612";
 421                         reg = <0x4c>;
 422                         interrupt-parent = <&gpio4>;
 423                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 424                         default-input = <0>;
 425
 426                         ports {
 427                                 #address-cells = <1>;
 428                                 #size-cells = <0>;
 429
 430                                 port@0 {
 431                                         reg = <0>;
 432                                         adv7612_in: endpoint {
 433                                                 remote-endpoint = <&hdmi_con_in>;
 434                                         };
 435                                 };
 436
 437                                 port@2 {
 438                                         reg = <2>;
 439                                         adv7612_out: endpoint {
 440                                                 remote-endpoint = <&vin0ep2>;
 441                                         };
 442                                 };
 443                         };
 444                 };
 445
 446                 eeprom@50 {
 447                         compatible = "renesas,r1ex24002", "atmel,24c02";
 448                         reg = <0x50>;
 449                         pagesize = <16>;
 450                 };
 451         };
 452
 453         /*
 454          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 455          * A fallback to GPIO is provided.
 456          */
 457         i2cexio4: i2c-14 {
 458                 compatible = "i2c-demux-pinctrl";
 459                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 460                 i2c-bus-name = "i2c-exio4";
 461                 #address-cells = <1>;
 462                 #size-cells = <0>;
 463         };
 464 };
 465
 466 &du {
 467         pinctrl-0 = <&du_pins>;
 468         pinctrl-names = "default";
 469         status = "okay";
 470
 471         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 472                  <&x13_clk>, <&x2_clk>;
 473         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 474
 475         ports {
 476                 port@0 {
 477                         endpoint {
 478                                 remote-endpoint = <&adv7511_in>;
 479                         };
 480                 };
 481         };
 482 };
 483
 484 &lvds0 {
 485         status = "okay";
 486
 487         ports {
 488                 port@1 {
 489                         lvds_connector: endpoint {
 490                         };
 491                 };
 492         };
 493 };
 494
 495 &extal_clk {
 496         clock-frequency = <20000000>;
 497 };
 498
 499 &pfc {
 500         pinctrl-0 = <&scif_clk_pins>;
 501         pinctrl-names = "default";
 502
 503         i2c1_pins: i2c1 {
 504                 groups = "i2c1";
 505                 function = "i2c1";
 506         };
 507
 508         i2c2_pins: i2c2 {
 509                 groups = "i2c2";
 510                 function = "i2c2";
 511         };
 512
 513         i2c4_pins: i2c4 {
 514                 groups = "i2c4_c";
 515                 function = "i2c4";
 516         };
 517
 518         du_pins: du {
 519                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 520                 function = "du";
 521         };
 522
 523         scif0_pins: scif0 {
 524                 groups = "scif0_data_d";
 525                 function = "scif0";
 526         };
 527
 528         scif1_pins: scif1 {
 529                 groups = "scif1_data_d";
 530                 function = "scif1";
 531         };
 532
 533         scif_clk_pins: scif_clk {
 534                 groups = "scif_clk";
 535                 function = "scif_clk";
 536         };
 537
 538         ether_pins: ether {
 539                 groups = "eth_link", "eth_mdio", "eth_rmii";
 540                 function = "eth";
 541         };
 542
 543         phy1_pins: phy1 {
 544                 groups = "intc_irq0";
 545                 function = "intc";
 546         };
 547
 548         sdhi0_pins: sd0 {
 549                 groups = "sdhi0_data4", "sdhi0_ctrl";
 550                 function = "sdhi0";
 551                 power-source = <3300>;
 552         };
 553
 554         sdhi0_pins_uhs: sd0_uhs {
 555                 groups = "sdhi0_data4", "sdhi0_ctrl";
 556                 function = "sdhi0";
 557                 power-source = <1800>;
 558         };
 559
 560         sdhi1_pins: sd1 {
 561                 groups = "sdhi1_data4", "sdhi1_ctrl";
 562                 function = "sdhi1";
 563                 power-source = <3300>;
 564         };
 565
 566         sdhi1_pins_uhs: sd1_uhs {
 567                 groups = "sdhi1_data4", "sdhi1_ctrl";
 568                 function = "sdhi1";
 569                 power-source = <1800>;
 570         };
 571
 572         sdhi2_pins: sd2 {
 573                 groups = "sdhi2_data4", "sdhi2_ctrl";
 574                 function = "sdhi2";
 575                 power-source = <3300>;
 576         };
 577
 578         sdhi2_pins_uhs: sd2_uhs {
 579                 groups = "sdhi2_data4", "sdhi2_ctrl";
 580                 function = "sdhi2";
 581                 power-source = <1800>;
 582         };
 583
 584         qspi_pins: qspi {
 585                 groups = "qspi_ctrl", "qspi_data4";
 586                 function = "qspi";
 587         };
 588
 589         msiof0_pins: msiof0 {
 590                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 591                                  "msiof0_tx";
 592                 function = "msiof0";
 593         };
 594
 595         usb0_pins: usb0 {
 596                 groups = "usb0";
 597                 function = "usb0";
 598         };
 599
 600         usb1_pins: usb1 {
 601                 groups = "usb1";
 602                 function = "usb1";
 603         };
 604
 605         vin0_pins: vin0 {
 606                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 607                 function = "vin0";
 608         };
 609
 610         vin1_pins: vin1 {
 611                 groups = "vin1_data8", "vin1_clk";
 612                 function = "vin1";
 613         };
 614
 615         sound_pins: sound {
 616                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 617                 function = "ssi";
 618         };
 619
 620         sound_clk_pins: sound_clk {
 621                 groups = "audio_clk_a";
 622                 function = "audio_clk";
 623         };
 624 };
 625
 626 &ether {
 627         pinctrl-0 = <&ether_pins &phy1_pins>;
 628         pinctrl-names = "default";
 629
 630         phy-handle = <&phy1>;
 631         renesas,ether-link-active-low;
 632         status = "okay";
 633
 634         phy1: ethernet-phy@1 {
 635                 reg = <1>;
 636                 interrupt-parent = <&irqc0>;
 637                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 638                 micrel,led-mode = <1>;
 639         };
 640 };
 641
 642 &cmt0 {
 643         status = "okay";
 644 };
 645
 646 &rwdt {
 647         timeout-sec = <60>;
 648         status = "okay";
 649 };
 650
 651 &sata0 {
 652         status = "okay";
 653 };
 654
 655 &scif0 {
 656         pinctrl-0 = <&scif0_pins>;
 657         pinctrl-names = "default";
 658
 659         status = "okay";
 660 };
 661
 662 &scif1 {
 663         pinctrl-0 = <&scif1_pins>;
 664         pinctrl-names = "default";
 665
 666         status = "okay";
 667 };
 668
 669 &scif_clk {
 670         clock-frequency = <14745600>;
 671 };
 672
 673 &sdhi0 {
 674         pinctrl-0 = <&sdhi0_pins>;
 675         pinctrl-1 = <&sdhi0_pins_uhs>;
 676         pinctrl-names = "default", "state_uhs";
 677
 678         vmmc-supply = <&vcc_sdhi0>;
 679         vqmmc-supply = <&vccq_sdhi0>;
 680         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 681         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 682         sd-uhs-sdr50;
 683         sd-uhs-sdr104;
 684         status = "okay";
 685 };
 686
 687 &sdhi1 {
 688         pinctrl-0 = <&sdhi1_pins>;
 689         pinctrl-1 = <&sdhi1_pins_uhs>;
 690         pinctrl-names = "default", "state_uhs";
 691
 692         vmmc-supply = <&vcc_sdhi1>;
 693         vqmmc-supply = <&vccq_sdhi1>;
 694         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 695         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 696         sd-uhs-sdr50;
 697         status = "okay";
 698 };
 699
 700 &sdhi2 {
 701         pinctrl-0 = <&sdhi2_pins>;
 702         pinctrl-1 = <&sdhi2_pins_uhs>;
 703         pinctrl-names = "default", "state_uhs";
 704
 705         vmmc-supply = <&vcc_sdhi2>;
 706         vqmmc-supply = <&vccq_sdhi2>;
 707         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 708         sd-uhs-sdr50;
 709         status = "okay";
 710 };
 711
 712 &qspi {
 713         pinctrl-0 = <&qspi_pins>;
 714         pinctrl-names = "default";
 715
 716         status = "okay";
 717
 718         flash: flash@0 {
 719                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 720                 reg = <0>;
 721                 spi-max-frequency = <30000000>;
 722                 spi-tx-bus-width = <4>;
 723                 spi-rx-bus-width = <4>;
 724                 spi-cpha;
 725                 spi-cpol;
 726                 m25p,fast-read;
 727
 728                 partitions {
 729                         compatible = "fixed-partitions";
 730                         #address-cells = <1>;
 731                         #size-cells = <1>;
 732
 733                         partition@0 {
 734                                 label = "loader";
 735                                 reg = <0x00000000 0x00080000>;
 736                                 read-only;
 737                         };
 738                         partition@80000 {
 739                                 label = "user";
 740                                 reg = <0x00080000 0x00580000>;
 741                                 read-only;
 742                         };
 743                         partition@600000 {
 744                                 label = "flash";
 745                                 reg = <0x00600000 0x03a00000>;
 746                         };
 747                 };
 748         };
 749 };
 750
 751 &msiof0 {
 752         pinctrl-0 = <&msiof0_pins>;
 753         pinctrl-names = "default";
 754
 755         status = "okay";
 756
 757         pmic: pmic@0 {
 758                 compatible = "renesas,r2a11302ft";
 759                 reg = <0>;
 760                 spi-max-frequency = <6000000>;
 761                 spi-cpol;
 762                 spi-cpha;
 763         };
 764 };
 765
 766 &i2c1 {
 767         pinctrl-0 = <&i2c1_pins>;
 768         pinctrl-names = "i2c-exio1";
 769 };
 770
 771 &i2c2 {
 772         pinctrl-0 = <&i2c2_pins>;
 773         pinctrl-names = "i2c-hdmi";
 774
 775         clock-frequency = <100000>;
 776 };
 777
 778 &i2c4 {
 779         pinctrl-0 = <&i2c4_pins>;
 780         pinctrl-names = "i2c-exio4";
 781 };
 782
 783 &i2c6 {
 784         status = "okay";
 785         clock-frequency = <100000>;
 786
 787         pmic@58 {
 788                 compatible = "dlg,da9063";
 789                 reg = <0x58>;
 790                 interrupt-parent = <&irqc0>;
 791                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 792                 interrupt-controller;
 793
 794                 rtc {
 795                         compatible = "dlg,da9063-rtc";
 796                 };
 797
 798                 wdt {
 799                         compatible = "dlg,da9063-watchdog";
 800                 };
 801         };
 802
 803         vdd_dvfs: regulator@68 {
 804                 compatible = "dlg,da9210";
 805                 reg = <0x68>;
 806                 interrupt-parent = <&irqc0>;
 807                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 808
 809                 regulator-min-microvolt = <1000000>;
 810                 regulator-max-microvolt = <1000000>;
 811                 regulator-boot-on;
 812                 regulator-always-on;
 813         };
 814 };
 815
 816 &pci0 {
 817         status = "okay";
 818         pinctrl-0 = <&usb0_pins>;
 819         pinctrl-names = "default";
 820 };
 821
 822 &pci1 {
 823         status = "okay";
 824         pinctrl-0 = <&usb1_pins>;
 825         pinctrl-names = "default";
 826 };
 827
 828 &hsusb {
 829         status = "okay";
 830         pinctrl-0 = <&usb0_pins>;
 831         pinctrl-names = "default";
 832         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 833 };
 834
 835 &usbphy {
 836         status = "okay";
 837 };
 838
 839 &pcie_bus_clk {
 840         clock-frequency = <100000000>;
 841 };
 842
 843 &pciec {
 844         status = "okay";
 845 };
 846
 847 &cpu0 {
 848         cpu0-supply = <&vdd_dvfs>;
 849 };
 850
 851 /* HDMI video input */
 852 &vin0 {
 853         status = "okay";
 854         pinctrl-0 = <&vin0_pins>;
 855         pinctrl-names = "default";
 856
 857         port {
 858                 vin0ep2: endpoint {
 859                         remote-endpoint = <&adv7612_out>;
 860                         bus-width = <24>;
 861                         hsync-active = <0>;
 862                         vsync-active = <0>;
 863                         pclk-sample = <1>;
 864                         data-active = <1>;
 865                 };
 866         };
 867 };
 868
 869 /* composite video input */
 870 &vin1 {
 871         status = "okay";
 872         pinctrl-0 = <&vin1_pins>;
 873         pinctrl-names = "default";
 874
 875         port {
 876                 vin1ep: endpoint {
 877                         remote-endpoint = <&adv7180>;
 878                         bus-width = <8>;
 879                 };
 880         };
 881 };
 882
 883 &rcar_sound {
 884         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 885         pinctrl-names = "default";
 886
 887         /* Single DAI */
 888         #sound-dai-cells = <0>;
 889
 890         status = "okay";
 891
 892         rcar_sound,dai {
 893                 dai0 {
 894                         playback = <&ssi0 &src2 &dvc0>;
 895                         capture  = <&ssi1 &src3 &dvc1>;
 896                 };
 897         };
 898 };
 899
 900 &ssi1 {
 901         shared-pin;
 902 };